Warning: Permanently added '50.19.144.137' (ED25519) to the list of known hosts. INFO: Calling: curl -H Pragma: -o copr-backend-git-11.8c774c3.tar.gz --location --connect-timeout 60 --retry 3 --retry-delay 10 --remote-time --show-error --fail --retry-all-errors https://copr-dist-git.fedorainfracloud.org/repo/pkgs/@copr/copr-pull-requests:pr:3299/copr-backend/copr-backend-git-11.8c774c3.tar.gz/md5/8a1a0f3bd0659446ed74b3098ac31972/copr-backend-git-11.8c774c3.tar.gz % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 2788k 100 2788k 0 0 108M 0 --:--:-- --:--:-- --:--:-- 108M INFO: Reading stdout from command: md5sum copr-backend-git-11.8c774c3.tar.gz INFO: Downloading test-data-copr-backend-5.tar.gz INFO: Calling: curl -H Pragma: -o test-data-copr-backend-5.tar.gz --location --connect-timeout 60 --retry 3 --retry-delay 10 --remote-time --show-error --fail --retry-all-errors https://copr-dist-git.fedorainfracloud.org/repo/pkgs/@copr/copr-pull-requests:pr:3299/copr-backend/test-data-copr-backend-5.tar.gz/md5/c94d55e21a4935b3e62f673fbae65af2/test-data-copr-backend-5.tar.gz % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 774k 100 774k 0 0 37.1M 0 --:--:-- --:--:-- --:--:-- 37.8M INFO: Reading stdout from command: md5sum test-data-copr-backend-5.tar.gz Running (timeout=18000): unbuffer mock --spec /var/lib/copr-rpmbuild/workspace/workdir-nlc0u02p/copr-backend/copr-backend.spec --sources /var/lib/copr-rpmbuild/workspace/workdir-nlc0u02p/copr-backend --resultdir /var/lib/copr-rpmbuild/results --uniqueext 1718178692.047821 -r /var/lib/copr-rpmbuild/results/configs/child.cfg INFO: mock.py version 5.6 starting (python version = 3.12.1, NVR = mock-5.6-1.fc39), args: /usr/libexec/mock/mock --spec /var/lib/copr-rpmbuild/workspace/workdir-nlc0u02p/copr-backend/copr-backend.spec --sources /var/lib/copr-rpmbuild/workspace/workdir-nlc0u02p/copr-backend --resultdir /var/lib/copr-rpmbuild/results --uniqueext 1718178692.047821 -r /var/lib/copr-rpmbuild/results/configs/child.cfg Start(bootstrap): init plugins INFO: tmpfs initialized INFO: selinux enabled INFO: chroot_scan: initialized INFO: compress_logs: initialized Finish(bootstrap): init plugins Start: init plugins INFO: tmpfs initialized INFO: selinux enabled INFO: chroot_scan: initialized INFO: compress_logs: initialized Finish: init plugins INFO: Signal handler active Start: run INFO: Start(/var/lib/copr-rpmbuild/workspace/workdir-nlc0u02p/copr-backend/copr-backend.spec) Config(fedora-40-x86_64) Start: clean chroot Finish: clean chroot Mock Version: 5.6 INFO: Mock Version: 5.6 Start(bootstrap): chroot init INFO: mounting tmpfs at /var/lib/mock/fedora-40-x86_64-bootstrap-1718178692.047821/root. INFO: calling preinit hooks INFO: enabled root cache INFO: enabled package manager cache Start(bootstrap): cleaning package manager metadata Finish(bootstrap): cleaning package manager metadata INFO: Guessed host environment type: unknown INFO: Using bootstrap image: registry.fedoraproject.org/fedora:40 INFO: Pulling image: registry.fedoraproject.org/fedora:40 INFO: Copy content of container registry.fedoraproject.org/fedora:40 to /var/lib/mock/fedora-40-x86_64-bootstrap-1718178692.047821/root INFO: Checking that registry.fedoraproject.org/fedora:40 image matches host's architecture INFO: mounting registry.fedoraproject.org/fedora:40 with podman image mount INFO: image registry.fedoraproject.org/fedora:40 as /var/lib/containers/storage/overlay/5c96e1e0b2bbf3a6bb7b2477f8a9bbcd3f2523f28e459b8e5310279e694eba4c/merged INFO: umounting image registry.fedoraproject.org/fedora:40 (/var/lib/containers/storage/overlay/5c96e1e0b2bbf3a6bb7b2477f8a9bbcd3f2523f28e459b8e5310279e694eba4c/merged) with podman image umount INFO: Using 'dnf' instead of 'dnf5' for bootstrap chroot INFO: Package manager dnf detected and used (fallback) INFO: Bootstrap image not marked ready Start(bootstrap): installing dnf5 tooling No matches found for the following disable plugin patterns: local, spacewalk, versionlock Copr repository 89 kB/s | 6.4 kB 00:00 Additional repo copr_copr_copr_dev 261 kB/s | 12 kB 00:00 fedora 28 MB/s | 20 MB 00:00 updates 25 MB/s | 7.2 MB 00:00 Dependencies resolved. ================================================================================ Package Architecture Version Repository Size ================================================================================ Installing: dnf5 x86_64 5.1.17-1.fc40 updates 701 k dnf5-plugins x86_64 5.1.17-1.fc40 updates 358 k Installing dependencies: fmt x86_64 10.2.1-4.fc40 fedora 125 k libdnf5 x86_64 5.1.17-1.fc40 updates 1.0 M libdnf5-cli x86_64 5.1.17-1.fc40 updates 231 k sdbus-cpp x86_64 1.4.0-2.fc40 fedora 110 k Transaction Summary ================================================================================ Install 6 Packages Total download size: 2.5 M Installed size: 6.8 M Downloading Packages: (1/6): sdbus-cpp-1.4.0-2.fc40.x86_64.rpm 9.9 MB/s | 110 kB 00:00 (2/6): fmt-10.2.1-4.fc40.x86_64.rpm 9.2 MB/s | 125 kB 00:00 (3/6): dnf5-plugins-5.1.17-1.fc40.x86_64.rpm 78 MB/s | 358 kB 00:00 (4/6): dnf5-5.1.17-1.fc40.x86_64.rpm 40 MB/s | 701 kB 00:00 (5/6): libdnf5-cli-5.1.17-1.fc40.x86_64.rpm 87 MB/s | 231 kB 00:00 (6/6): libdnf5-5.1.17-1.fc40.x86_64.rpm 90 MB/s | 1.0 MB 00:00 -------------------------------------------------------------------------------- Total 16 MB/s | 2.5 MB 00:00 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : 1/1 Installing : fmt-10.2.1-4.fc40.x86_64 1/6 Installing : libdnf5-5.1.17-1.fc40.x86_64 2/6 Installing : libdnf5-cli-5.1.17-1.fc40.x86_64 3/6 Installing : sdbus-cpp-1.4.0-2.fc40.x86_64 4/6 Installing : dnf5-5.1.17-1.fc40.x86_64 5/6 Installing : dnf5-plugins-5.1.17-1.fc40.x86_64 6/6 Running scriptlet: dnf5-plugins-5.1.17-1.fc40.x86_64 6/6 Installed: dnf5-5.1.17-1.fc40.x86_64 dnf5-plugins-5.1.17-1.fc40.x86_64 fmt-10.2.1-4.fc40.x86_64 libdnf5-5.1.17-1.fc40.x86_64 libdnf5-cli-5.1.17-1.fc40.x86_64 sdbus-cpp-1.4.0-2.fc40.x86_64 Complete! INFO: Switching package manager from dnf to the dnf5 (direct choice) Finish(bootstrap): installing dnf5 tooling Start(bootstrap): creating root cache Finish(bootstrap): creating root cache Finish(bootstrap): chroot init Start: chroot init INFO: mounting tmpfs at /var/lib/mock/fedora-40-x86_64-1718178692.047821/root. INFO: calling preinit hooks INFO: enabled root cache INFO: enabled package manager cache Start: cleaning package manager metadata Finish: cleaning package manager metadata INFO: enabled HW Info plugin INFO: Package manager dnf5 detected and used (direct choice) INFO: Buildroot is handled by package management downloaded with a bootstrap image: rpm-4.19.1.1-1.fc40.x86_64 rpm-sequoia-1.6.0-3.fc40.x86_64 python3-dnf-4.19.2-1.fc40.noarch yum-4.19.2-1.fc40.noarch dnf5-5.1.17-1.fc40.x86_64 dnf5-plugins-5.1.17-1.fc40.x86_64 Start: installing minimal buildroot with dnf5 Updating and loading repositories: updates 100% | 51.7 MiB/s | 9.7 MiB | 00m00s fedora 100% | 37.4 MiB/s | 21.2 MiB | 00m01s Copr repository 100% | 70.6 KiB/s | 7.9 KiB | 00m00s Additional repo copr_copr_copr_dev 100% | 461.3 KiB/s | 13.4 KiB | 00m00s Repositories loaded. Package Arch Version Repository Size Installing group/module packages: bash x86_64 5.2.26-3.fc40 fedora 8.1 MiB bzip2 x86_64 1.0.8-18.fc40 fedora 91.7 KiB coreutils x86_64 9.4-6.fc40 fedora 5.8 MiB cpio x86_64 2.15-1.fc40 fedora 1.1 MiB diffutils x86_64 3.10-5.fc40 fedora 1.6 MiB fedora-release-common noarch 40-39 updates 19.1 KiB findutils x86_64 1:4.9.0-8.fc40 fedora 1.5 MiB gawk x86_64 5.3.0-3.fc40 fedora 1.7 MiB glibc-minimal-langpack x86_64 2.39-13.fc40 updates 0.0 B grep x86_64 3.11-7.fc40 fedora 1.0 MiB gzip x86_64 1.13-1.fc40 fedora 385.0 KiB info x86_64 7.1-2.fc40 fedora 357.8 KiB patch x86_64 2.7.6-24.fc40 fedora 262.8 KiB redhat-rpm-config noarch 286-1.fc40 fedora 185.2 KiB rpm-build x86_64 4.19.1.1-1.fc40 fedora 173.7 KiB sed x86_64 4.9-1.fc40 fedora 861.5 KiB shadow-utils x86_64 2:4.15.1-3.fc40 updates 4.1 MiB tar x86_64 2:1.35-3.fc40 fedora 2.9 MiB unzip x86_64 6.0-63.fc40 fedora 382.8 KiB util-linux x86_64 2.40.1-1.fc40 updates 3.7 MiB which x86_64 2.21-41.fc40 fedora 80.2 KiB xz x86_64 1:5.4.6-3.fc40 fedora 2.0 MiB Installing dependencies: alternatives x86_64 1.27-1.fc40 updates 66.3 KiB ansible-srpm-macros noarch 1-14.fc40 fedora 35.7 KiB audit-libs x86_64 4.0.1-1.fc40 fedora 327.3 KiB authselect x86_64 1.5.0-5.fc40 fedora 153.6 KiB authselect-libs x86_64 1.5.0-5.fc40 fedora 818.3 KiB basesystem noarch 11-20.fc40 fedora 0.0 B binutils x86_64 2.41-37.fc40 updates 26.4 MiB binutils-gold x86_64 2.41-37.fc40 updates 2.0 MiB bzip2-libs x86_64 1.0.8-18.fc40 fedora 80.7 KiB ca-certificates noarch 2023.2.62_v7.0.401-6.fc40 fedora 2.3 MiB coreutils-common x86_64 9.4-6.fc40 fedora 11.4 MiB cracklib x86_64 2.9.11-5.fc40 fedora 238.9 KiB crypto-policies noarch 20240510-1.gitd287a42.fc40 updates 151.9 KiB curl x86_64 8.6.0-8.fc40 updates 734.6 KiB cyrus-sasl-lib x86_64 2.1.28-19.fc40 fedora 2.3 MiB debugedit x86_64 5.0-14.fc40 fedora 199.0 KiB dwz x86_64 0.15-6.fc40 fedora 290.9 KiB ed x86_64 1.20.2-1.fc40 updates 146.9 KiB efi-srpm-macros noarch 5-11.fc40 fedora 40.1 KiB elfutils x86_64 0.191-4.fc40 fedora 2.5 MiB elfutils-debuginfod-client x86_64 0.191-4.fc40 fedora 64.9 KiB elfutils-default-yama-scope noarch 0.191-4.fc40 fedora 1.8 KiB elfutils-libelf x86_64 0.191-4.fc40 fedora 1.2 MiB elfutils-libs x86_64 0.191-4.fc40 fedora 646.1 KiB fedora-gpg-keys noarch 40-2 updates 124.7 KiB fedora-release noarch 40-39 updates 0.0 B fedora-release-identity-basic noarch 40-39 updates 654.0 B fedora-repos noarch 40-2 updates 4.9 KiB file x86_64 5.45-4.fc40 fedora 103.5 KiB file-libs x86_64 5.45-4.fc40 fedora 9.9 MiB filesystem x86_64 3.18-8.fc40 fedora 106.0 B fonts-srpm-macros noarch 1:2.0.5-14.fc40 fedora 55.3 KiB forge-srpm-macros noarch 0.3.1-1.fc40 updates 39.0 KiB fpc-srpm-macros noarch 1.3-12.fc40 fedora 144.0 B gdb-minimal x86_64 14.2-2.fc40 updates 12.7 MiB gdbm x86_64 1:1.23-6.fc40 fedora 460.9 KiB gdbm-libs x86_64 1:1.23-6.fc40 fedora 121.9 KiB ghc-srpm-macros noarch 1.9-1.fc40 fedora 716.0 B glibc x86_64 2.39-13.fc40 updates 6.6 MiB glibc-common x86_64 2.39-13.fc40 updates 1.0 MiB glibc-gconv-extra x86_64 2.39-13.fc40 updates 7.8 MiB gmp x86_64 1:6.2.1-8.fc40 fedora 794.6 KiB gnat-srpm-macros noarch 6-5.fc40 fedora 1.0 KiB go-srpm-macros noarch 3.5.0-1.fc40 fedora 60.6 KiB jansson x86_64 2.13.1-9.fc40 fedora 88.3 KiB kernel-srpm-macros noarch 1.0-23.fc40 fedora 1.9 KiB keyutils-libs x86_64 1.6.3-3.fc40 fedora 54.4 KiB krb5-libs x86_64 1.21.2-5.fc40 fedora 2.3 MiB libacl x86_64 2.3.2-1.fc40 fedora 40.0 KiB libarchive x86_64 3.7.2-4.fc40 updates 914.6 KiB libattr x86_64 2.5.2-3.fc40 fedora 28.5 KiB libblkid x86_64 2.40.1-1.fc40 updates 258.5 KiB libbrotli x86_64 1.1.0-3.fc40 fedora 829.5 KiB libcap x86_64 2.69-8.fc40 updates 219.8 KiB libcap-ng x86_64 0.8.4-4.fc40 fedora 73.1 KiB libcom_err x86_64 1.47.0-5.fc40 fedora 67.2 KiB libcurl x86_64 8.6.0-8.fc40 updates 772.8 KiB libeconf x86_64 0.6.2-2.fc40 updates 58.0 KiB libevent x86_64 2.1.12-12.fc40 fedora 895.6 KiB libfdisk x86_64 2.40.1-1.fc40 updates 362.9 KiB libffi x86_64 3.4.4-7.fc40 fedora 81.6 KiB libgcc x86_64 14.1.1-5.fc40 updates 274.6 KiB libgomp x86_64 14.1.1-5.fc40 updates 523.5 KiB libidn2 x86_64 2.3.7-1.fc40 fedora 329.1 KiB libmount x86_64 2.40.1-1.fc40 updates 351.8 KiB libnghttp2 x86_64 1.59.0-3.fc40 updates 166.1 KiB libnsl2 x86_64 2.0.1-1.fc40 fedora 57.9 KiB libpkgconf x86_64 2.1.0-1.fc40 fedora 74.2 KiB libpsl x86_64 0.21.5-3.fc40 fedora 80.5 KiB libpwquality x86_64 1.4.5-9.fc40 fedora 417.8 KiB libselinux x86_64 3.6-4.fc40 fedora 173.0 KiB libsemanage x86_64 3.6-3.fc40 fedora 293.5 KiB libsepol x86_64 3.6-3.fc40 fedora 802.0 KiB libsmartcols x86_64 2.40.1-1.fc40 updates 180.4 KiB libssh x86_64 0.10.6-5.fc40 fedora 509.3 KiB libssh-config noarch 0.10.6-5.fc40 fedora 277.0 B libstdc++ x86_64 14.1.1-5.fc40 updates 2.8 MiB libtasn1 x86_64 4.19.0-6.fc40 fedora 175.7 KiB libtirpc x86_64 1.3.4-1.rc3.fc40 fedora 202.8 KiB libtool-ltdl x86_64 2.4.7-10.fc40 fedora 66.2 KiB libunistring x86_64 1.1-7.fc40 fedora 1.7 MiB libutempter x86_64 1.2.1-13.fc40 fedora 57.7 KiB libuuid x86_64 2.40.1-1.fc40 updates 37.4 KiB libverto x86_64 0.3.2-8.fc40 fedora 29.5 KiB libxcrypt x86_64 4.4.36-5.fc40 fedora 262.8 KiB libxml2 x86_64 2.12.7-1.fc40 updates 1.7 MiB libzstd x86_64 1.5.6-1.fc40 updates 787.9 KiB lua-libs x86_64 5.4.6-5.fc40 fedora 281.1 KiB lua-srpm-macros noarch 1-13.fc40 fedora 1.3 KiB lz4-libs x86_64 1.9.4-6.fc40 fedora 129.4 KiB mpfr x86_64 4.2.1-4.fc40 updates 832.0 KiB ncurses-base noarch 6.4-12.20240127.fc40 fedora 326.2 KiB ncurses-libs x86_64 6.4-12.20240127.fc40 fedora 963.2 KiB ocaml-srpm-macros noarch 9-3.fc40 fedora 1.9 KiB openblas-srpm-macros noarch 2-16.fc40 fedora 104.0 B openldap x86_64 2.6.7-1.fc40 fedora 635.1 KiB openssl-libs x86_64 1:3.2.1-2.fc40 fedora 7.8 MiB p11-kit x86_64 0.25.3-4.fc40 fedora 2.2 MiB p11-kit-trust x86_64 0.25.3-4.fc40 fedora 391.4 KiB package-notes-srpm-macros noarch 0.5-11.fc40 fedora 1.6 KiB pam x86_64 1.6.1-3.fc40 updates 1.8 MiB pam-libs x86_64 1.6.1-3.fc40 updates 135.0 KiB pcre2 x86_64 10.42-2.fc40.2 fedora 637.6 KiB pcre2-syntax noarch 10.42-2.fc40.2 fedora 235.1 KiB perl-srpm-macros noarch 1-53.fc40 fedora 861.0 B pkgconf x86_64 2.1.0-1.fc40 fedora 82.4 KiB pkgconf-m4 noarch 2.1.0-1.fc40 fedora 13.9 KiB pkgconf-pkg-config x86_64 2.1.0-1.fc40 fedora 989.0 B popt x86_64 1.19-6.fc40 fedora 136.9 KiB publicsuffix-list-dafsa noarch 20240107-3.fc40 fedora 67.5 KiB pyproject-srpm-macros noarch 1.12.0-1.fc40 fedora 1.5 KiB python-srpm-macros noarch 3.12-7.fc40 fedora 50.1 KiB qt5-srpm-macros noarch 5.15.14-1.fc40 updates 500.0 B qt6-srpm-macros noarch 6.7.1-1.fc40 updates 456.0 B readline x86_64 8.2-8.fc40 fedora 489.2 KiB rpm x86_64 4.19.1.1-1.fc40 fedora 3.0 MiB rpm-build-libs x86_64 4.19.1.1-1.fc40 fedora 198.4 KiB rpm-libs x86_64 4.19.1.1-1.fc40 fedora 709.9 KiB rpm-sequoia x86_64 1.6.0-3.fc40 updates 2.2 MiB rust-srpm-macros noarch 26.3-1.fc40 updates 4.8 KiB setup noarch 2.14.5-2.fc40 fedora 720.4 KiB sqlite-libs x86_64 3.45.1-2.fc40 fedora 1.4 MiB systemd-libs x86_64 255.7-1.fc40 updates 1.9 MiB util-linux-core x86_64 2.40.1-1.fc40 updates 1.5 MiB xxhash-libs x86_64 0.8.2-2.fc40 fedora 88.5 KiB xz-libs x86_64 1:5.4.6-3.fc40 fedora 209.8 KiB zig-srpm-macros noarch 1-2.fc40 fedora 1.1 KiB zip x86_64 3.0-40.fc40 fedora 703.2 KiB zlib-ng-compat x86_64 2.1.6-2.fc40 fedora 134.0 KiB zstd x86_64 1.5.6-1.fc40 updates 1.7 MiB Installing groups: Buildsystem building group Transaction Summary: Installing: 152 packages Total size of inbound packages is 53 MiB. Need to download 53 MiB. After this operation 178 MiB will be used (install 178 MiB, remove 0 B). [ 1/152] bzip2-0:1.0.8-18.fc40.x86_64 100% | 4.3 MiB/s | 52.4 KiB | 00m00s [ 2/152] coreutils-0:9.4-6.fc40.x86_64 100% | 63.7 MiB/s | 1.1 MiB | 00m00s [ 3/152] cpio-0:2.15-1.fc40.x86_64 100% | 57.1 MiB/s | 292.2 KiB | 00m00s [ 4/152] bash-0:5.2.26-3.fc40.x86_64 100% | 82.1 MiB/s | 1.8 MiB | 00m00s [ 5/152] diffutils-0:3.10-5.fc40.x86_6 100% | 99.0 MiB/s | 405.6 KiB | 00m00s [ 6/152] findutils-1:4.9.0-8.fc40.x86_ 100% | 96.1 MiB/s | 492.0 KiB | 00m00s [ 7/152] grep-0:3.11-7.fc40.x86_64 100% | 97.7 MiB/s | 300.2 KiB | 00m00s [ 8/152] gzip-0:1.13-1.fc40.x86_64 100% | 55.5 MiB/s | 170.6 KiB | 00m00s [ 9/152] info-0:7.1-2.fc40.x86_64 100% | 89.0 MiB/s | 182.3 KiB | 00m00s [ 10/152] patch-0:2.7.6-24.fc40.x86_64 100% | 63.8 MiB/s | 130.7 KiB | 00m00s [ 11/152] redhat-rpm-config-0:286-1.fc4 100% | 40.5 MiB/s | 83.0 KiB | 00m00s [ 12/152] rpm-build-0:4.19.1.1-1.fc40.x 100% | 38.2 MiB/s | 78.2 KiB | 00m00s [ 13/152] sed-0:4.9-1.fc40.x86_64 100% | 103.6 MiB/s | 318.2 KiB | 00m00s [ 14/152] unzip-0:6.0-63.fc40.x86_64 100% | 45.1 MiB/s | 184.5 KiB | 00m00s [ 15/152] which-0:2.21-41.fc40.x86_64 100% | 13.5 MiB/s | 41.4 KiB | 00m00s [ 16/152] fedora-release-common-0:40-39 100% | 10.4 MiB/s | 21.3 KiB | 00m00s [ 17/152] xz-1:5.4.6-3.fc40.x86_64 100% | 181.4 MiB/s | 557.4 KiB | 00m00s [ 18/152] glibc-minimal-langpack-0:2.39 100% | 33.5 MiB/s | 103.0 KiB | 00m00s [ 19/152] gawk-0:5.3.0-3.fc40.x86_64 100% | 178.6 MiB/s | 1.1 MiB | 00m00s [ 20/152] shadow-utils-2:4.15.1-3.fc40. 100% | 220.3 MiB/s | 1.3 MiB | 00m00s [ 21/152] util-linux-0:2.40.1-1.fc40.x8 100% | 150.5 MiB/s | 1.2 MiB | 00m00s [ 22/152] tar-2:1.35-3.fc40.x86_64 100% | 33.5 MiB/s | 856.6 KiB | 00m00s [ 23/152] filesystem-0:3.18-8.fc40.x86_ 100% | 155.2 MiB/s | 1.1 MiB | 00m00s [ 24/152] ncurses-libs-0:6.4-12.2024012 100% | 64.9 MiB/s | 332.5 KiB | 00m00s [ 25/152] bzip2-libs-0:1.0.8-18.fc40.x8 100% | 10.0 MiB/s | 40.9 KiB | 00m00s [ 26/152] libacl-0:2.3.2-1.fc40.x86_64 100% | 6.0 MiB/s | 24.4 KiB | 00m00s [ 27/152] gmp-1:6.2.1-8.fc40.x86_64 100% | 61.0 MiB/s | 312.5 KiB | 00m00s [ 28/152] coreutils-common-0:9.4-6.fc40 100% | 239.1 MiB/s | 2.2 MiB | 00m00s [ 29/152] libattr-0:2.5.2-3.fc40.x86_64 100% | 2.9 MiB/s | 18.0 KiB | 00m00s [ 30/152] libselinux-0:3.6-4.fc40.x86_6 100% | 17.1 MiB/s | 87.5 KiB | 00m00s [ 31/152] pcre2-0:10.42-2.fc40.2.x86_64 100% | 76.7 MiB/s | 235.8 KiB | 00m00s [ 32/152] ansible-srpm-macros-0:1-14.fc 100% | 5.1 MiB/s | 20.8 KiB | 00m00s [ 33/152] dwz-0:0.15-6.fc40.x86_64 100% | 44.9 MiB/s | 137.8 KiB | 00m00s [ 34/152] efi-srpm-macros-0:5-11.fc40.n 100% | 7.3 MiB/s | 22.3 KiB | 00m00s [ 35/152] openssl-libs-1:3.2.1-2.fc40.x 100% | 192.1 MiB/s | 2.3 MiB | 00m00s [ 36/152] file-0:5.45-4.fc40.x86_64 100% | 12.0 MiB/s | 49.0 KiB | 00m00s [ 37/152] fonts-srpm-macros-1:2.0.5-14. 100% | 6.5 MiB/s | 26.5 KiB | 00m00s [ 38/152] fpc-srpm-macros-0:1.3-12.fc40 100% | 7.6 MiB/s | 7.8 KiB | 00m00s [ 39/152] ghc-srpm-macros-0:1.9-1.fc40. 100% | 2.8 MiB/s | 8.7 KiB | 00m00s [ 40/152] go-srpm-macros-0:3.5.0-1.fc40 100% | 9.0 MiB/s | 27.5 KiB | 00m00s [ 41/152] kernel-srpm-macros-0:1.0-23.f 100% | 4.8 MiB/s | 9.7 KiB | 00m00s [ 42/152] gnat-srpm-macros-0:6-5.fc40.n 100% | 1.7 MiB/s | 8.8 KiB | 00m00s [ 43/152] lua-srpm-macros-0:1-13.fc40.n 100% | 2.8 MiB/s | 8.7 KiB | 00m00s [ 44/152] ocaml-srpm-macros-0:9-3.fc40. 100% | 3.0 MiB/s | 9.1 KiB | 00m00s [ 45/152] openblas-srpm-macros-0:2-16.f 100% | 2.4 MiB/s | 7.5 KiB | 00m00s [ 46/152] package-notes-srpm-macros-0:0 100% | 3.2 MiB/s | 9.9 KiB | 00m00s [ 47/152] perl-srpm-macros-0:1-53.fc40. 100% | 4.1 MiB/s | 8.4 KiB | 00m00s [ 48/152] pyproject-srpm-macros-0:1.12. 100% | 6.7 MiB/s | 13.6 KiB | 00m00s [ 49/152] python-srpm-macros-0:3.12-7.f 100% | 11.6 MiB/s | 23.8 KiB | 00m00s [ 50/152] zig-srpm-macros-0:1-2.fc40.no 100% | 3.9 MiB/s | 8.0 KiB | 00m00s [ 51/152] zip-0:3.0-40.fc40.x86_64 100% | 86.2 MiB/s | 264.8 KiB | 00m00s [ 52/152] debugedit-0:5.0-14.fc40.x86_6 100% | 38.4 MiB/s | 78.7 KiB | 00m00s [ 53/152] elfutils-0:0.191-4.fc40.x86_6 100% | 129.7 MiB/s | 531.3 KiB | 00m00s [ 54/152] elfutils-libelf-0:0.191-4.fc4 100% | 68.3 MiB/s | 209.8 KiB | 00m00s [ 55/152] popt-0:1.19-6.fc40.x86_64 100% | 21.7 MiB/s | 66.7 KiB | 00m00s [ 56/152] readline-0:8.2-8.fc40.x86_64 100% | 69.4 MiB/s | 213.3 KiB | 00m00s [ 57/152] rpm-build-libs-0:4.19.1.1-1.f 100% | 46.4 MiB/s | 95.0 KiB | 00m00s [ 58/152] rpm-libs-0:4.19.1.1-1.fc40.x8 100% | 100.6 MiB/s | 308.9 KiB | 00m00s [ 59/152] rpm-0:4.19.1.1-1.fc40.x86_64 100% | 29.3 MiB/s | 540.1 KiB | 00m00s [ 60/152] xz-libs-1:5.4.6-3.fc40.x86_64 100% | 35.8 MiB/s | 110.0 KiB | 00m00s [ 61/152] audit-libs-0:4.0.1-1.fc40.x86 100% | 61.2 MiB/s | 125.3 KiB | 00m00s [ 62/152] libsemanage-0:3.6-3.fc40.x86_ 100% | 56.8 MiB/s | 116.4 KiB | 00m00s [ 63/152] libxcrypt-0:4.4.36-5.fc40.x86 100% | 57.7 MiB/s | 118.1 KiB | 00m00s [ 64/152] glibc-common-0:2.39-13.fc40.x 100% | 62.8 MiB/s | 385.9 KiB | 00m00s [ 65/152] setup-0:2.14.5-2.fc40.noarch 100% | 50.4 MiB/s | 154.7 KiB | 00m00s [ 66/152] libcap-ng-0:0.8.4-4.fc40.x86_ 100% | 10.6 MiB/s | 32.6 KiB | 00m00s [ 67/152] util-linux-core-0:2.40.1-1.fc 100% | 104.9 MiB/s | 537.0 KiB | 00m00s [ 68/152] libutempter-0:1.2.1-13.fc40.x 100% | 6.4 MiB/s | 26.4 KiB | 00m00s [ 69/152] zlib-ng-compat-0:2.1.6-2.fc40 100% | 37.6 MiB/s | 77.1 KiB | 00m00s [ 70/152] ncurses-base-0:6.4-12.2024012 100% | 28.9 MiB/s | 88.8 KiB | 00m00s [ 71/152] pcre2-syntax-0:10.42-2.fc40.2 100% | 46.5 MiB/s | 142.7 KiB | 00m00s [ 72/152] ca-certificates-0:2023.2.62_v 100% | 120.3 MiB/s | 862.1 KiB | 00m00s [ 73/152] libsepol-0:3.6-3.fc40.x86_64 100% | 41.5 MiB/s | 340.1 KiB | 00m00s [ 74/152] file-libs-0:5.45-4.fc40.x86_6 100% | 186.2 MiB/s | 762.7 KiB | 00m00s [ 75/152] elfutils-libs-0:0.191-4.fc40. 100% | 63.4 MiB/s | 259.9 KiB | 00m00s [ 76/152] elfutils-debuginfod-client-0: 100% | 9.4 MiB/s | 38.5 KiB | 00m00s [ 77/152] lua-libs-0:5.4.6-5.fc40.x86_6 100% | 42.9 MiB/s | 131.9 KiB | 00m00s [ 78/152] sqlite-libs-0:3.45.1-2.fc40.x 100% | 229.5 MiB/s | 705.1 KiB | 00m00s [ 79/152] elfutils-default-yama-scope-0 100% | 6.6 MiB/s | 13.5 KiB | 00m00s [ 80/152] basesystem-0:11-20.fc40.noarc 100% | 2.3 MiB/s | 7.2 KiB | 00m00s [ 81/152] libcap-0:2.69-8.fc40.x86_64 100% | 27.9 MiB/s | 85.7 KiB | 00m00s [ 82/152] glibc-gconv-extra-0:2.39-13.f 100% | 185.1 MiB/s | 1.7 MiB | 00m00s [ 83/152] libzstd-0:1.5.6-1.fc40.x86_64 100% | 100.6 MiB/s | 309.2 KiB | 00m00s [ 84/152] rpm-sequoia-0:1.6.0-3.fc40.x8 100% | 206.5 MiB/s | 845.9 KiB | 00m00s [ 85/152] libgcc-0:14.1.1-5.fc40.x86_64 100% | 31.6 MiB/s | 129.6 KiB | 00m00s [ 86/152] libgomp-0:14.1.1-5.fc40.x86_6 100% | 114.0 MiB/s | 350.2 KiB | 00m00s [ 87/152] jansson-0:2.13.1-9.fc40.x86_6 100% | 14.4 MiB/s | 44.2 KiB | 00m00s [ 88/152] binutils-0:2.41-37.fc40.x86_6 100% | 239.8 MiB/s | 6.2 MiB | 00m00s [ 89/152] zstd-0:1.5.6-1.fc40.x86_64 100% | 22.3 MiB/s | 479.4 KiB | 00m00s [ 90/152] lz4-libs-0:1.9.4-6.fc40.x86_6 100% | 32.8 MiB/s | 67.2 KiB | 00m00s [ 91/152] pkgconf-pkg-config-0:2.1.0-1. 100% | 9.5 MiB/s | 9.7 KiB | 00m00s [ 92/152] pkgconf-0:2.1.0-1.fc40.x86_64 100% | 21.2 MiB/s | 43.5 KiB | 00m00s [ 93/152] pkgconf-m4-0:2.1.0-1.fc40.noa 100% | 6.8 MiB/s | 13.9 KiB | 00m00s [ 94/152] libpkgconf-0:2.1.0-1.fc40.x86 100% | 18.5 MiB/s | 37.8 KiB | 00m00s [ 95/152] curl-0:8.6.0-8.fc40.x86_64 100% | 97.9 MiB/s | 300.7 KiB | 00m00s [ 96/152] libarchive-0:3.7.2-4.fc40.x86 100% | 99.3 MiB/s | 406.7 KiB | 00m00s [ 97/152] forge-srpm-macros-0:0.3.1-1.f 100% | 6.3 MiB/s | 19.5 KiB | 00m00s [ 98/152] qt5-srpm-macros-0:5.15.14-1.f 100% | 8.6 MiB/s | 8.8 KiB | 00m00s [ 99/152] qt6-srpm-macros-0:6.7.1-1.fc4 100% | 8.7 MiB/s | 8.9 KiB | 00m00s [100/152] rust-srpm-macros-0:26.3-1.fc4 100% | 12.2 MiB/s | 12.5 KiB | 00m00s [101/152] ed-0:1.20.2-1.fc40.x86_64 100% | 80.0 MiB/s | 81.9 KiB | 00m00s [102/152] glibc-0:2.39-13.fc40.x86_64 100% | 35.6 MiB/s | 2.2 MiB | 00m00s [103/152] crypto-policies-0:20240510-1. 100% | 32.2 MiB/s | 99.0 KiB | 00m00s [104/152] mpfr-0:4.2.1-4.fc40.x86_64 100% | 68.2 MiB/s | 348.9 KiB | 00m00s [105/152] p11-kit-0:0.25.3-4.fc40.x86_6 100% | 119.6 MiB/s | 489.8 KiB | 00m00s [106/152] libstdc++-0:14.1.1-5.fc40.x86 100% | 123.1 MiB/s | 882.5 KiB | 00m00s [107/152] libffi-0:3.4.4-7.fc40.x86_64 100% | 7.7 MiB/s | 39.4 KiB | 00m00s [108/152] libtasn1-0:4.19.0-6.fc40.x86_ 100% | 18.0 MiB/s | 73.7 KiB | 00m00s [109/152] p11-kit-trust-0:0.25.3-4.fc40 100% | 32.1 MiB/s | 131.5 KiB | 00m00s [110/152] libblkid-0:2.40.1-1.fc40.x86_ 100% | 40.4 MiB/s | 124.3 KiB | 00m00s [111/152] libuuid-0:2.40.1-1.fc40.x86_6 100% | 6.9 MiB/s | 28.4 KiB | 00m00s [112/152] libmount-0:2.40.1-1.fc40.x86_ 100% | 75.5 MiB/s | 154.6 KiB | 00m00s [113/152] libsmartcols-0:2.40.1-1.fc40. 100% | 27.1 MiB/s | 83.3 KiB | 00m00s [114/152] libfdisk-0:2.40.1-1.fc40.x86_ 100% | 77.8 MiB/s | 159.4 KiB | 00m00s [115/152] pam-0:1.6.1-3.fc40.x86_64 100% | 180.1 MiB/s | 553.4 KiB | 00m00s [116/152] pam-libs-0:1.6.1-3.fc40.x86_6 100% | 18.6 MiB/s | 57.1 KiB | 00m00s [117/152] authselect-0:1.5.0-5.fc40.x86 100% | 71.4 MiB/s | 146.2 KiB | 00m00s [118/152] gdbm-libs-1:1.23-6.fc40.x86_6 100% | 27.4 MiB/s | 56.2 KiB | 00m00s [119/152] libnsl2-0:2.0.1-1.fc40.x86_64 100% | 28.9 MiB/s | 29.6 KiB | 00m00s [120/152] libpwquality-0:1.4.5-9.fc40.x 100% | 58.4 MiB/s | 119.7 KiB | 00m00s [121/152] systemd-libs-0:255.7-1.fc40.x 100% | 53.1 MiB/s | 707.2 KiB | 00m00s [122/152] libtirpc-0:1.3.4-1.rc3.fc40.x 100% | 22.6 MiB/s | 92.5 KiB | 00m00s [123/152] cracklib-0:2.9.11-5.fc40.x86_ 100% | 22.6 MiB/s | 92.5 KiB | 00m00s [124/152] authselect-libs-0:1.5.0-5.fc4 100% | 23.7 MiB/s | 218.6 KiB | 00m00s [125/152] krb5-libs-0:1.21.2-5.fc40.x86 100% | 105.5 MiB/s | 756.1 KiB | 00m00s [126/152] libcom_err-0:1.47.0-5.fc40.x8 100% | 6.2 MiB/s | 25.4 KiB | 00m00s [127/152] keyutils-libs-0:1.6.3-3.fc40. 100% | 15.4 MiB/s | 31.5 KiB | 00m00s [128/152] libverto-0:0.3.2-8.fc40.x86_6 100% | 6.7 MiB/s | 20.5 KiB | 00m00s [129/152] libeconf-0:0.6.2-2.fc40.x86_6 100% | 15.6 MiB/s | 32.0 KiB | 00m00s [130/152] fedora-repos-0:40-2.noarch 100% | 3.1 MiB/s | 9.5 KiB | 00m00s [131/152] libxml2-0:2.12.7-1.fc40.x86_6 100% | 133.9 MiB/s | 685.3 KiB | 00m00s [132/152] fedora-gpg-keys-0:40-2.noarch 100% | 64.5 MiB/s | 132.1 KiB | 00m00s [133/152] gdbm-1:1.23-6.fc40.x86_64 100% | 18.6 MiB/s | 152.5 KiB | 00m00s [134/152] alternatives-0:1.27-1.fc40.x8 100% | 19.9 MiB/s | 40.7 KiB | 00m00s [135/152] fedora-release-0:40-39.noarch 100% | 5.3 MiB/s | 10.8 KiB | 00m00s [136/152] xxhash-libs-0:0.8.2-2.fc40.x8 100% | 18.0 MiB/s | 36.9 KiB | 00m00s [137/152] libcurl-0:8.6.0-8.fc40.x86_64 100% | 84.2 MiB/s | 344.9 KiB | 00m00s [138/152] libbrotli-0:1.1.0-3.fc40.x86_ 100% | 27.5 MiB/s | 338.4 KiB | 00m00s [139/152] gdb-minimal-0:14.2-2.fc40.x86 100% | 171.4 MiB/s | 4.3 MiB | 00m00s [140/152] libidn2-0:2.3.7-1.fc40.x86_64 100% | 29.0 MiB/s | 118.7 KiB | 00m00s [141/152] binutils-gold-0:2.41-37.fc40. 100% | 26.3 MiB/s | 780.6 KiB | 00m00s [142/152] libpsl-0:0.21.5-3.fc40.x86_64 100% | 62.4 MiB/s | 63.9 KiB | 00m00s [143/152] libssh-0:0.10.6-5.fc40.x86_64 100% | 102.8 MiB/s | 210.6 KiB | 00m00s [144/152] openldap-0:2.6.7-1.fc40.x86_6 100% | 82.8 MiB/s | 254.3 KiB | 00m00s [145/152] libunistring-0:1.1-7.fc40.x86 100% | 88.8 MiB/s | 545.5 KiB | 00m00s [146/152] publicsuffix-list-dafsa-0:202 100% | 11.3 MiB/s | 58.1 KiB | 00m00s [147/152] libssh-config-0:0.10.6-5.fc40 100% | 2.2 MiB/s | 9.0 KiB | 00m00s [148/152] libevent-0:2.1.12-12.fc40.x86 100% | 83.7 MiB/s | 257.2 KiB | 00m00s [149/152] libtool-ltdl-0:2.4.7-10.fc40. 100% | 8.8 MiB/s | 36.2 KiB | 00m00s [150/152] cyrus-sasl-lib-0:2.1.28-19.fc 100% | 154.2 MiB/s | 789.3 KiB | 00m00s [151/152] libnghttp2-0:1.59.0-3.fc40.x8 100% | 36.8 MiB/s | 75.3 KiB | 00m00s [152/152] fedora-release-identity-basic 100% | 3.8 MiB/s | 11.6 KiB | 00m00s -------------------------------------------------------------------------------- [152/152] Total 100% | 80.2 MiB/s | 52.7 MiB | 00m01s Running transaction Importing PGP key 0xA15B79CC: Userid : "Fedora (40) " Fingerprint: 115DF9AEF857853EE8445D0A0727707EA15B79CC From : file:///usr/share/distribution-gpg-keys/fedora/RPM-GPG-KEY-fedora-40-primary The key was successfully imported. [ 1/154] Verify package files 100% | 694.0 B/s | 152.0 B | 00m00s >>> Running pre-transaction scriptlet: filesystem-0:3.18-8.fc40.x86_64 >>> Stop pre-transaction scriptlet: filesystem-0:3.18-8.fc40.x86_64 [ 2/154] Prepare transaction 100% | 4.2 KiB/s | 152.0 B | 00m00s [ 3/154] Installing libgcc-0:14.1.1-5. 100% | 134.9 MiB/s | 276.3 KiB | 00m00s >>> Running post-install scriptlet: libgcc-0:14.1.1-5.fc40.x86_64 >>> Stop post-install scriptlet: libgcc-0:14.1.1-5.fc40.x86_64 [ 4/154] Installing crypto-policies-0: 100% | 45.0 MiB/s | 184.5 KiB | 00m00s >>> Running post-install scriptlet: crypto-policies-0:20240510-1.gitd287a42.fc40 >>> Stop post-install scriptlet: crypto-policies-0:20240510-1.gitd287a42.fc40.no [ 5/154] Installing fedora-release-ide 100% | 0.0 B/s | 912.0 B | 00m00s [ 6/154] Installing fedora-gpg-keys-0: 100% | 55.2 MiB/s | 169.7 KiB | 00m00s [ 7/154] Installing fedora-repos-0:40- 100% | 0.0 B/s | 5.7 KiB | 00m00s [ 8/154] Installing fedora-release-com 100% | 22.7 MiB/s | 23.3 KiB | 00m00s [ 9/154] Installing fedora-release-0:4 100% | 0.0 B/s | 124.0 B | 00m00s [ 10/154] Installing setup-0:2.14.5-2.f 100% | 59.1 MiB/s | 725.8 KiB | 00m00s >>> Running post-install scriptlet: setup-0:2.14.5-2.fc40.noarch >>> Stop post-install scriptlet: setup-0:2.14.5-2.fc40.noarch [ 11/154] Installing filesystem-0:3.18- 100% | 3.5 MiB/s | 212.4 KiB | 00m00s [ 12/154] Installing basesystem-0:11-20 100% | 0.0 B/s | 124.0 B | 00m00s [ 13/154] Installing libssh-config-0:0. 100% | 0.0 B/s | 816.0 B | 00m00s [ 14/154] Installing publicsuffix-list- 100% | 0.0 B/s | 68.3 KiB | 00m00s [ 15/154] Installing rust-srpm-macros-0 100% | 0.0 B/s | 5.6 KiB | 00m00s [ 16/154] Installing qt6-srpm-macros-0: 100% | 0.0 B/s | 732.0 B | 00m00s [ 17/154] Installing qt5-srpm-macros-0: 100% | 0.0 B/s | 776.0 B | 00m00s [ 18/154] Installing pkgconf-m4-0:2.1.0 100% | 0.0 B/s | 14.3 KiB | 00m00s [ 19/154] Installing pcre2-syntax-0:10. 100% | 232.0 MiB/s | 237.6 KiB | 00m00s [ 20/154] Installing ncurses-base-0:6.4 100% | 85.8 MiB/s | 351.6 KiB | 00m00s [ 21/154] Installing glibc-minimal-lang 100% | 0.0 B/s | 124.0 B | 00m00s [ 22/154] Installing ncurses-libs-0:6.4 100% | 236.7 MiB/s | 969.7 KiB | 00m00s >>> Running pre-install scriptlet: glibc-0:2.39-13.fc40.x86_64 >>> Stop pre-install scriptlet: glibc-0:2.39-13.fc40.x86_64 [ 23/154] Installing glibc-0:2.39-13.fc 100% | 236.3 MiB/s | 6.6 MiB | 00m00s >>> Running post-install scriptlet: glibc-0:2.39-13.fc40.x86_64 >>> Stop post-install scriptlet: glibc-0:2.39-13.fc40.x86_64 [ 24/154] Installing bash-0:5.2.26-3.fc 100% | 408.1 MiB/s | 8.2 MiB | 00m00s >>> Running post-install scriptlet: bash-0:5.2.26-3.fc40.x86_64 >>> Stop post-install scriptlet: bash-0:5.2.26-3.fc40.x86_64 [ 25/154] Installing glibc-common-0:2.3 100% | 204.2 MiB/s | 1.0 MiB | 00m00s [ 26/154] Installing glibc-gconv-extra- 100% | 245.6 MiB/s | 7.9 MiB | 00m00s >>> Running post-install scriptlet: glibc-gconv-extra-0:2.39-13.fc40.x86_64 >>> Stop post-install scriptlet: glibc-gconv-extra-0:2.39-13.fc40.x86_64 [ 27/154] Installing zlib-ng-compat-0:2 100% | 131.7 MiB/s | 134.8 KiB | 00m00s [ 28/154] Installing xz-libs-1:5.4.6-3. 100% | 206.0 MiB/s | 210.9 KiB | 00m00s [ 29/154] Installing bzip2-libs-0:1.0.8 100% | 79.9 MiB/s | 81.8 KiB | 00m00s [ 30/154] Installing popt-0:1.19-6.fc40 100% | 70.1 MiB/s | 143.5 KiB | 00m00s [ 31/154] Installing readline-0:8.2-8.f 100% | 239.9 MiB/s | 491.4 KiB | 00m00s [ 32/154] Installing libzstd-0:1.5.6-1. 100% | 385.3 MiB/s | 789.2 KiB | 00m00s [ 33/154] Installing elfutils-libelf-0: 100% | 389.8 MiB/s | 1.2 MiB | 00m00s [ 34/154] Installing libstdc++-0:14.1.1 100% | 395.2 MiB/s | 2.8 MiB | 00m00s [ 35/154] Installing libuuid-0:2.40.1-1 100% | 0.0 B/s | 38.4 KiB | 00m00s [ 36/154] Installing libblkid-0:2.40.1- 100% | 253.6 MiB/s | 259.7 KiB | 00m00s [ 37/154] Installing gmp-1:6.2.1-8.fc40 100% | 389.1 MiB/s | 796.8 KiB | 00m00s [ 38/154] Installing libattr-0:2.5.2-3. 100% | 0.0 B/s | 29.5 KiB | 00m00s [ 39/154] Installing libacl-0:2.3.2-1.f 100% | 0.0 B/s | 40.8 KiB | 00m00s [ 40/154] Installing libxcrypt-0:4.4.36 100% | 259.3 MiB/s | 265.5 KiB | 00m00s [ 41/154] Installing lz4-libs-0:1.9.4-6 100% | 127.4 MiB/s | 130.5 KiB | 00m00s [ 42/154] Installing gdbm-libs-1:1.23-6 100% | 120.7 MiB/s | 123.6 KiB | 00m00s [ 43/154] Installing libeconf-0:0.6.2-2 100% | 58.3 MiB/s | 59.6 KiB | 00m00s [ 44/154] Installing mpfr-0:4.2.1-4.fc4 100% | 271.4 MiB/s | 833.7 KiB | 00m00s [ 45/154] Installing gawk-0:5.3.0-3.fc4 100% | 288.0 MiB/s | 1.7 MiB | 00m00s [ 46/154] Installing dwz-0:0.15-6.fc40. 100% | 285.5 MiB/s | 292.3 KiB | 00m00s [ 47/154] Installing unzip-0:6.0-63.fc4 100% | 188.6 MiB/s | 386.3 KiB | 00m00s [ 48/154] Installing file-libs-0:5.45-4 100% | 662.0 MiB/s | 9.9 MiB | 00m00s [ 49/154] Installing file-0:5.45-4.fc40 100% | 102.6 MiB/s | 105.0 KiB | 00m00s [ 50/154] Installing pcre2-0:10.42-2.fc 100% | 312.0 MiB/s | 639.1 KiB | 00m00s [ 51/154] Installing grep-0:3.11-7.fc40 100% | 200.7 MiB/s | 1.0 MiB | 00m00s [ 52/154] Installing xz-1:5.4.6-3.fc40. 100% | 286.1 MiB/s | 2.0 MiB | 00m00s [ 53/154] Installing libcap-ng-0:0.8.4- 100% | 73.2 MiB/s | 75.0 KiB | 00m00s [ 54/154] Installing audit-libs-0:4.0.1 100% | 160.9 MiB/s | 329.4 KiB | 00m00s [ 55/154] Installing pam-libs-0:1.6.1-3 100% | 134.2 MiB/s | 137.4 KiB | 00m00s [ 56/154] Installing libcap-0:2.69-8.fc 100% | 109.8 MiB/s | 224.8 KiB | 00m00s [ 57/154] Installing systemd-libs-0:255 100% | 321.8 MiB/s | 1.9 MiB | 00m00s [ 58/154] Installing libsepol-0:3.6-3.f 100% | 392.1 MiB/s | 803.0 KiB | 00m00s [ 59/154] Installing libselinux-0:3.6-4 100% | 170.2 MiB/s | 174.3 KiB | 00m00s [ 60/154] Installing sed-0:4.9-1.fc40.x 100% | 212.3 MiB/s | 869.7 KiB | 00m00s [ 61/154] Installing findutils-1:4.9.0- 100% | 293.2 MiB/s | 1.5 MiB | 00m00s [ 62/154] Installing libmount-0:2.40.1- 100% | 344.5 MiB/s | 352.8 KiB | 00m00s [ 63/154] Installing lua-libs-0:5.4.6-5 100% | 275.7 MiB/s | 282.3 KiB | 00m00s [ 64/154] Installing jansson-0:2.13.1-9 100% | 87.6 MiB/s | 89.7 KiB | 00m00s [ 65/154] Installing libtasn1-0:4.19.0- 100% | 173.3 MiB/s | 177.5 KiB | 00m00s [ 66/154] Installing libsmartcols-0:2.4 100% | 177.3 MiB/s | 181.5 KiB | 00m00s [ 67/154] Installing libcom_err-0:1.47. 100% | 66.7 MiB/s | 68.3 KiB | 00m00s [ 68/154] Installing alternatives-0:1.2 100% | 66.4 MiB/s | 68.0 KiB | 00m00s [ 69/154] Installing libunistring-0:1.1 100% | 346.1 MiB/s | 1.7 MiB | 00m00s [ 70/154] Installing libidn2-0:2.3.7-1. 100% | 163.6 MiB/s | 335.0 KiB | 00m00s [ 71/154] Installing libpsl-0:0.21.5-3. 100% | 79.7 MiB/s | 81.6 KiB | 00m00s [ 72/154] Installing util-linux-core-0: 100% | 247.7 MiB/s | 1.5 MiB | 00m00s [ 73/154] Installing tar-2:1.35-3.fc40. 100% | 368.8 MiB/s | 3.0 MiB | 00m00s [ 74/154] Installing libsemanage-0:3.6- 100% | 144.2 MiB/s | 295.3 KiB | 00m00s [ 75/154] Installing shadow-utils-2:4.1 100% | 148.9 MiB/s | 4.2 MiB | 00m00s >>> Running pre-install scriptlet: libutempter-0:1.2.1-13.fc40.x86_64 >>> Stop pre-install scriptlet: libutempter-0:1.2.1-13.fc40.x86_64 [ 76/154] Installing libutempter-0:1.2. 100% | 58.3 MiB/s | 59.7 KiB | 00m00s [ 77/154] Installing zip-0:3.0-40.fc40. 100% | 230.2 MiB/s | 707.1 KiB | 00m00s [ 78/154] Installing gdbm-1:1.23-6.fc40 100% | 227.4 MiB/s | 465.8 KiB | 00m00s [ 79/154] Installing cyrus-sasl-lib-0:2 100% | 326.2 MiB/s | 2.3 MiB | 00m00s [ 80/154] Installing zstd-0:1.5.6-1.fc4 100% | 419.0 MiB/s | 1.7 MiB | 00m00s [ 81/154] Installing libfdisk-0:2.40.1- 100% | 355.5 MiB/s | 364.0 KiB | 00m00s [ 82/154] Installing bzip2-0:1.0.8-18.f 100% | 93.9 MiB/s | 96.2 KiB | 00m00s [ 83/154] Installing libxml2-0:2.12.7-1 100% | 340.1 MiB/s | 1.7 MiB | 00m00s [ 84/154] Installing sqlite-libs-0:3.45 100% | 350.3 MiB/s | 1.4 MiB | 00m00s [ 85/154] Installing elfutils-default-y 100% | 408.6 KiB/s | 2.0 KiB | 00m00s >>> Running post-install scriptlet: elfutils-default-yama-scope-0:0.191-4.fc40.n >>> Stop post-install scriptlet: elfutils-default-yama-scope-0:0.191-4.fc40.noar [ 86/154] Installing ed-0:1.20.2-1.fc40 100% | 145.7 MiB/s | 149.2 KiB | 00m00s [ 87/154] Installing patch-0:2.7.6-24.f 100% | 258.1 MiB/s | 264.3 KiB | 00m00s [ 88/154] Installing cpio-0:2.15-1.fc40 100% | 274.9 MiB/s | 1.1 MiB | 00m00s [ 89/154] Installing diffutils-0:3.10-5 100% | 317.2 MiB/s | 1.6 MiB | 00m00s [ 90/154] Installing libgomp-0:14.1.1-5 100% | 256.3 MiB/s | 524.9 KiB | 00m00s [ 91/154] Installing libpkgconf-0:2.1.0 100% | 73.6 MiB/s | 75.3 KiB | 00m00s [ 92/154] Installing pkgconf-0:2.1.0-1. 100% | 82.9 MiB/s | 84.9 KiB | 00m00s [ 93/154] Installing pkgconf-pkg-config 100% | 0.0 B/s | 1.8 KiB | 00m00s [ 94/154] Installing libffi-0:3.4.4-7.f 100% | 81.0 MiB/s | 83.0 KiB | 00m00s [ 95/154] Installing p11-kit-0:0.25.3-4 100% | 274.3 MiB/s | 2.2 MiB | 00m00s [ 96/154] Installing p11-kit-trust-0:0. 100% | 48.0 MiB/s | 393.1 KiB | 00m00s >>> Running post-install scriptlet: p11-kit-trust-0:0.25.3-4.fc40.x86_64 >>> Stop post-install scriptlet: p11-kit-trust-0:0.25.3-4.fc40.x86_64 [ 97/154] Installing keyutils-libs-0:1. 100% | 54.5 MiB/s | 55.8 KiB | 00m00s [ 98/154] Installing libverto-0:0.3.2-8 100% | 30.5 MiB/s | 31.3 KiB | 00m00s [ 99/154] Installing xxhash-libs-0:0.8. 100% | 87.8 MiB/s | 89.9 KiB | 00m00s [100/154] Installing libbrotli-0:1.1.0- 100% | 270.8 MiB/s | 831.8 KiB | 00m00s [101/154] Installing libtool-ltdl-0:2.4 100% | 65.7 MiB/s | 67.3 KiB | 00m00s [102/154] Installing libnghttp2-0:1.59. 100% | 163.3 MiB/s | 167.2 KiB | 00m00s [103/154] Installing perl-srpm-macros-0 100% | 0.0 B/s | 1.1 KiB | 00m00s [104/154] Installing package-notes-srpm 100% | 0.0 B/s | 2.0 KiB | 00m00s [105/154] Installing openblas-srpm-macr 100% | 0.0 B/s | 384.0 B | 00m00s [106/154] Installing ocaml-srpm-macros- 100% | 0.0 B/s | 2.2 KiB | 00m00s [107/154] Installing kernel-srpm-macros 100% | 0.0 B/s | 2.3 KiB | 00m00s [108/154] Installing gnat-srpm-macros-0 100% | 0.0 B/s | 1.3 KiB | 00m00s [109/154] Installing ghc-srpm-macros-0: 100% | 0.0 B/s | 992.0 B | 00m00s [110/154] Installing fpc-srpm-macros-0: 100% | 0.0 B/s | 420.0 B | 00m00s [111/154] Installing ansible-srpm-macro 100% | 35.4 MiB/s | 36.2 KiB | 00m00s [112/154] Installing coreutils-common-0 100% | 395.3 MiB/s | 11.5 MiB | 00m00s [113/154] Installing openssl-libs-1:3.2 100% | 432.7 MiB/s | 7.8 MiB | 00m00s [114/154] Installing coreutils-0:9.4-6. 100% | 290.7 MiB/s | 5.8 MiB | 00m00s >>> Running pre-install scriptlet: ca-certificates-0:2023.2.62_v7.0.401-6.fc40.n >>> Stop pre-install scriptlet: ca-certificates-0:2023.2.62_v7.0.401-6.fc40.noar [115/154] Installing ca-certificates-0: 100% | 4.1 MiB/s | 2.3 MiB | 00m01s >>> Running post-install scriptlet: ca-certificates-0:2023.2.62_v7.0.401-6.fc40. >>> Stop post-install scriptlet: ca-certificates-0:2023.2.62_v7.0.401-6.fc40.noa [116/154] Installing krb5-libs-0:1.21.2 100% | 286.8 MiB/s | 2.3 MiB | 00m00s [117/154] Installing libtirpc-0:1.3.4-1 100% | 199.8 MiB/s | 204.6 KiB | 00m00s [118/154] Installing gzip-0:1.13-1.fc40 100% | 190.7 MiB/s | 390.6 KiB | 00m00s [119/154] Installing authselect-libs-0: 100% | 162.7 MiB/s | 833.2 KiB | 00m00s [120/154] Installing libarchive-0:3.7.2 100% | 298.4 MiB/s | 916.6 KiB | 00m00s [121/154] Installing authselect-0:1.5.0 100% | 77.1 MiB/s | 157.9 KiB | 00m00s [122/154] Installing cracklib-0:2.9.11- 100% | 81.5 MiB/s | 250.3 KiB | 00m00s [123/154] Installing libpwquality-0:1.4 100% | 140.0 MiB/s | 430.1 KiB | 00m00s [124/154] Installing libnsl2-0:2.0.1-1. 100% | 57.7 MiB/s | 59.0 KiB | 00m00s [125/154] Installing pam-0:1.6.1-3.fc40 100% | 165.4 MiB/s | 1.8 MiB | 00m00s [126/154] Installing libssh-0:0.10.6-5. 100% | 249.7 MiB/s | 511.4 KiB | 00m00s [127/154] Installing rpm-sequoia-0:1.6. 100% | 368.4 MiB/s | 2.2 MiB | 00m00s [128/154] Installing rpm-libs-0:4.19.1. 100% | 347.4 MiB/s | 711.4 KiB | 00m00s [129/154] Installing libevent-0:2.1.12- 100% | 292.8 MiB/s | 899.4 KiB | 00m00s [130/154] Installing openldap-0:2.6.7-1 100% | 208.0 MiB/s | 638.9 KiB | 00m00s [131/154] Installing libcurl-0:8.6.0-8. 100% | 251.9 MiB/s | 773.9 KiB | 00m00s [132/154] Installing elfutils-libs-0:0. 100% | 316.4 MiB/s | 648.0 KiB | 00m00s [133/154] Installing elfutils-debuginfo 100% | 65.3 MiB/s | 66.9 KiB | 00m00s [134/154] Installing binutils-0:2.41-37 100% | 382.7 MiB/s | 26.4 MiB | 00m00s >>> Running post-install scriptlet: binutils-0:2.41-37.fc40.x86_64 >>> Stop post-install scriptlet: binutils-0:2.41-37.fc40.x86_64 [135/154] Installing binutils-gold-0:2. 100% | 184.6 MiB/s | 2.0 MiB | 00m00s >>> Running post-install scriptlet: binutils-gold-0:2.41-37.fc40.x86_64 >>> Stop post-install scriptlet: binutils-gold-0:2.41-37.fc40.x86_64 [136/154] Installing elfutils-0:0.191-4 100% | 365.2 MiB/s | 2.6 MiB | 00m00s [137/154] Installing gdb-minimal-0:14.2 100% | 409.7 MiB/s | 12.7 MiB | 00m00s [138/154] Installing debugedit-0:5.0-14 100% | 197.0 MiB/s | 201.7 KiB | 00m00s [139/154] Installing rpm-build-libs-0:4 100% | 194.5 MiB/s | 199.2 KiB | 00m00s [140/154] Installing curl-0:8.6.0-8.fc4 100% | 72.0 MiB/s | 736.9 KiB | 00m00s >>> Running pre-install scriptlet: rpm-0:4.19.1.1-1.fc40.x86_64 >>> Stop pre-install scriptlet: rpm-0:4.19.1.1-1.fc40.x86_64 [141/154] Installing rpm-0:4.19.1.1-1.f 100% | 171.2 MiB/s | 2.4 MiB | 00m00s [142/154] Installing efi-srpm-macros-0: 100% | 0.0 B/s | 41.2 KiB | 00m00s [143/154] Installing lua-srpm-macros-0: 100% | 0.0 B/s | 1.9 KiB | 00m00s [144/154] Installing zig-srpm-macros-0: 100% | 0.0 B/s | 1.7 KiB | 00m00s [145/154] Installing python-srpm-macros 100% | 0.0 B/s | 51.3 KiB | 00m00s [146/154] Installing fonts-srpm-macros- 100% | 0.0 B/s | 56.5 KiB | 00m00s [147/154] Installing go-srpm-macros-0:3 100% | 0.0 B/s | 61.6 KiB | 00m00s [148/154] Installing forge-srpm-macros- 100% | 39.4 MiB/s | 40.3 KiB | 00m00s [149/154] Installing redhat-rpm-config- 100% | 93.6 MiB/s | 191.7 KiB | 00m00s [150/154] Installing rpm-build-0:4.19.1 100% | 88.8 MiB/s | 182.0 KiB | 00m00s [151/154] Installing pyproject-srpm-mac 100% | 2.0 MiB/s | 2.1 KiB | 00m00s [152/154] Installing util-linux-0:2.40. 100% | 178.3 MiB/s | 3.7 MiB | 00m00s >>> Running post-install scriptlet: util-linux-0:2.40.1-1.fc40.x86_64 >>> Stop post-install scriptlet: util-linux-0:2.40.1-1.fc40.x86_64 [153/154] Installing which-0:2.21-41.fc 100% | 80.5 MiB/s | 82.4 KiB | 00m00s [154/154] Installing info-0:7.1-2.fc40. 100% | 449.4 KiB/s | 358.2 KiB | 00m01s >>> Running post-transaction scriptlet: filesystem-0:3.18-8.fc40.x86_64 >>> Stop post-transaction scriptlet: filesystem-0:3.18-8.fc40.x86_64 >>> Running post-transaction scriptlet: ca-certificates-0:2023.2.62_v7.0.401-6.f >>> Stop post-transaction scriptlet: ca-certificates-0:2023.2.62_v7.0.401-6.fc40 >>> Running post-transaction scriptlet: authselect-libs-0:1.5.0-5.fc40.x86_64 >>> Stop post-transaction scriptlet: authselect-libs-0:1.5.0-5.fc40.x86_64 >>> Running post-transaction scriptlet: rpm-0:4.19.1.1-1.fc40.x86_64 >>> Stop post-transaction scriptlet: rpm-0:4.19.1.1-1.fc40.x86_64 >>> Running trigger-install scriptlet: glibc-common-0:2.39-13.fc40.x86_64 >>> Stop trigger-install scriptlet: glibc-common-0:2.39-13.fc40.x86_64 >>> Running trigger-install scriptlet: info-0:7.1-2.fc40.x86_64 >>> Stop trigger-install scriptlet: info-0:7.1-2.fc40.x86_64 Finish: installing minimal buildroot with dnf5 Start: creating root cache Finish: creating root cache Finish: chroot init INFO: Installed packages: INFO: alternatives-1.27-1.fc40.x86_64 ansible-srpm-macros-1-14.fc40.noarch audit-libs-4.0.1-1.fc40.x86_64 authselect-1.5.0-5.fc40.x86_64 authselect-libs-1.5.0-5.fc40.x86_64 basesystem-11-20.fc40.noarch bash-5.2.26-3.fc40.x86_64 binutils-2.41-37.fc40.x86_64 binutils-gold-2.41-37.fc40.x86_64 bzip2-1.0.8-18.fc40.x86_64 bzip2-libs-1.0.8-18.fc40.x86_64 ca-certificates-2023.2.62_v7.0.401-6.fc40.noarch coreutils-9.4-6.fc40.x86_64 coreutils-common-9.4-6.fc40.x86_64 cpio-2.15-1.fc40.x86_64 cracklib-2.9.11-5.fc40.x86_64 crypto-policies-20240510-1.gitd287a42.fc40.noarch curl-8.6.0-8.fc40.x86_64 cyrus-sasl-lib-2.1.28-19.fc40.x86_64 debugedit-5.0-14.fc40.x86_64 diffutils-3.10-5.fc40.x86_64 dwz-0.15-6.fc40.x86_64 ed-1.20.2-1.fc40.x86_64 efi-srpm-macros-5-11.fc40.noarch elfutils-0.191-4.fc40.x86_64 elfutils-debuginfod-client-0.191-4.fc40.x86_64 elfutils-default-yama-scope-0.191-4.fc40.noarch elfutils-libelf-0.191-4.fc40.x86_64 elfutils-libs-0.191-4.fc40.x86_64 fedora-gpg-keys-40-2.noarch fedora-release-40-39.noarch fedora-release-common-40-39.noarch fedora-release-identity-basic-40-39.noarch fedora-repos-40-2.noarch file-5.45-4.fc40.x86_64 file-libs-5.45-4.fc40.x86_64 filesystem-3.18-8.fc40.x86_64 findutils-4.9.0-8.fc40.x86_64 fonts-srpm-macros-2.0.5-14.fc40.noarch forge-srpm-macros-0.3.1-1.fc40.noarch fpc-srpm-macros-1.3-12.fc40.noarch gawk-5.3.0-3.fc40.x86_64 gdb-minimal-14.2-2.fc40.x86_64 gdbm-1.23-6.fc40.x86_64 gdbm-libs-1.23-6.fc40.x86_64 ghc-srpm-macros-1.9-1.fc40.noarch glibc-2.39-13.fc40.x86_64 glibc-common-2.39-13.fc40.x86_64 glibc-gconv-extra-2.39-13.fc40.x86_64 glibc-minimal-langpack-2.39-13.fc40.x86_64 gmp-6.2.1-8.fc40.x86_64 gnat-srpm-macros-6-5.fc40.noarch go-srpm-macros-3.5.0-1.fc40.noarch gpg-pubkey-a15b79cc-63d04c2c grep-3.11-7.fc40.x86_64 gzip-1.13-1.fc40.x86_64 info-7.1-2.fc40.x86_64 jansson-2.13.1-9.fc40.x86_64 kernel-srpm-macros-1.0-23.fc40.noarch keyutils-libs-1.6.3-3.fc40.x86_64 krb5-libs-1.21.2-5.fc40.x86_64 libacl-2.3.2-1.fc40.x86_64 libarchive-3.7.2-4.fc40.x86_64 libattr-2.5.2-3.fc40.x86_64 libblkid-2.40.1-1.fc40.x86_64 libbrotli-1.1.0-3.fc40.x86_64 libcap-2.69-8.fc40.x86_64 libcap-ng-0.8.4-4.fc40.x86_64 libcom_err-1.47.0-5.fc40.x86_64 libcurl-8.6.0-8.fc40.x86_64 libeconf-0.6.2-2.fc40.x86_64 libevent-2.1.12-12.fc40.x86_64 libfdisk-2.40.1-1.fc40.x86_64 libffi-3.4.4-7.fc40.x86_64 libgcc-14.1.1-5.fc40.x86_64 libgomp-14.1.1-5.fc40.x86_64 libidn2-2.3.7-1.fc40.x86_64 libmount-2.40.1-1.fc40.x86_64 libnghttp2-1.59.0-3.fc40.x86_64 libnsl2-2.0.1-1.fc40.x86_64 libpkgconf-2.1.0-1.fc40.x86_64 libpsl-0.21.5-3.fc40.x86_64 libpwquality-1.4.5-9.fc40.x86_64 libselinux-3.6-4.fc40.x86_64 libsemanage-3.6-3.fc40.x86_64 libsepol-3.6-3.fc40.x86_64 libsmartcols-2.40.1-1.fc40.x86_64 libssh-0.10.6-5.fc40.x86_64 libssh-config-0.10.6-5.fc40.noarch libstdc++-14.1.1-5.fc40.x86_64 libtasn1-4.19.0-6.fc40.x86_64 libtirpc-1.3.4-1.rc3.fc40.x86_64 libtool-ltdl-2.4.7-10.fc40.x86_64 libunistring-1.1-7.fc40.x86_64 libutempter-1.2.1-13.fc40.x86_64 libuuid-2.40.1-1.fc40.x86_64 libverto-0.3.2-8.fc40.x86_64 libxcrypt-4.4.36-5.fc40.x86_64 libxml2-2.12.7-1.fc40.x86_64 libzstd-1.5.6-1.fc40.x86_64 lua-libs-5.4.6-5.fc40.x86_64 lua-srpm-macros-1-13.fc40.noarch lz4-libs-1.9.4-6.fc40.x86_64 mpfr-4.2.1-4.fc40.x86_64 ncurses-base-6.4-12.20240127.fc40.noarch ncurses-libs-6.4-12.20240127.fc40.x86_64 ocaml-srpm-macros-9-3.fc40.noarch openblas-srpm-macros-2-16.fc40.noarch openldap-2.6.7-1.fc40.x86_64 openssl-libs-3.2.1-2.fc40.x86_64 p11-kit-0.25.3-4.fc40.x86_64 p11-kit-trust-0.25.3-4.fc40.x86_64 package-notes-srpm-macros-0.5-11.fc40.noarch pam-1.6.1-3.fc40.x86_64 pam-libs-1.6.1-3.fc40.x86_64 patch-2.7.6-24.fc40.x86_64 pcre2-10.42-2.fc40.2.x86_64 pcre2-syntax-10.42-2.fc40.2.noarch perl-srpm-macros-1-53.fc40.noarch pkgconf-2.1.0-1.fc40.x86_64 pkgconf-m4-2.1.0-1.fc40.noarch pkgconf-pkg-config-2.1.0-1.fc40.x86_64 popt-1.19-6.fc40.x86_64 publicsuffix-list-dafsa-20240107-3.fc40.noarch pyproject-srpm-macros-1.12.0-1.fc40.noarch python-srpm-macros-3.12-7.fc40.noarch qt5-srpm-macros-5.15.14-1.fc40.noarch qt6-srpm-macros-6.7.1-1.fc40.noarch readline-8.2-8.fc40.x86_64 redhat-rpm-config-286-1.fc40.noarch rpm-4.19.1.1-1.fc40.x86_64 rpm-build-4.19.1.1-1.fc40.x86_64 rpm-build-libs-4.19.1.1-1.fc40.x86_64 rpm-libs-4.19.1.1-1.fc40.x86_64 rpm-sequoia-1.6.0-3.fc40.x86_64 rust-srpm-macros-26.3-1.fc40.noarch sed-4.9-1.fc40.x86_64 setup-2.14.5-2.fc40.noarch shadow-utils-4.15.1-3.fc40.x86_64 sqlite-libs-3.45.1-2.fc40.x86_64 systemd-libs-255.7-1.fc40.x86_64 tar-1.35-3.fc40.x86_64 unzip-6.0-63.fc40.x86_64 util-linux-2.40.1-1.fc40.x86_64 util-linux-core-2.40.1-1.fc40.x86_64 which-2.21-41.fc40.x86_64 xxhash-libs-0.8.2-2.fc40.x86_64 xz-5.4.6-3.fc40.x86_64 xz-libs-5.4.6-3.fc40.x86_64 zig-srpm-macros-1-2.fc40.noarch zip-3.0-40.fc40.x86_64 zlib-ng-compat-2.1.6-2.fc40.x86_64 zstd-1.5.6-1.fc40.x86_64 Start: buildsrpm Start: rpmbuild -bs Building target platforms: x86_64 Building for target x86_64 setting SOURCE_DATE_EPOCH=1716249600 Wrote: /builddir/build/SRPMS/copr-backend-1.177-1.git.11.f31c7c4.fc40.src.rpm Finish: rpmbuild -bs cp: preserving permissions for ‘/var/lib/copr-rpmbuild/results/chroot_scan/var/lib/mock/fedora-40-x86_64-1718178692.047821/root/var/log’: No such file or directory INFO: chroot_scan: 1 files copied to /var/lib/copr-rpmbuild/results/chroot_scan INFO: /var/lib/mock/fedora-40-x86_64-1718178692.047821/root/var/log/dnf5.log Finish: buildsrpm INFO: Done(/var/lib/copr-rpmbuild/workspace/workdir-nlc0u02p/copr-backend/copr-backend.spec) Config(child) 0 minutes 27 seconds INFO: Results and/or logs in: /var/lib/copr-rpmbuild/results INFO: Cleaning up build root ('cleanup_on_success=True') Start: clean chroot INFO: unmounting tmpfs. Finish: clean chroot INFO: Start(/var/lib/copr-rpmbuild/results/copr-backend-1.177-1.git.11.f31c7c4.fc40.src.rpm) Config(fedora-40-x86_64) Start(bootstrap): chroot init INFO: mounting tmpfs at /var/lib/mock/fedora-40-x86_64-bootstrap-1718178692.047821/root. INFO: reusing tmpfs at /var/lib/mock/fedora-40-x86_64-bootstrap-1718178692.047821/root. INFO: calling preinit hooks INFO: enabled root cache INFO: enabled package manager cache Start(bootstrap): cleaning package manager metadata Finish(bootstrap): cleaning package manager metadata Finish(bootstrap): chroot init Start: chroot init INFO: mounting tmpfs at /var/lib/mock/fedora-40-x86_64-1718178692.047821/root. INFO: calling preinit hooks INFO: enabled root cache Start: unpacking root cache Finish: unpacking root cache INFO: enabled package manager cache Start: cleaning package manager metadata Finish: cleaning package manager metadata INFO: enabled HW Info plugin INFO: Buildroot is handled by package management downloaded with a bootstrap image: rpm-4.19.1.1-1.fc40.x86_64 rpm-sequoia-1.6.0-3.fc40.x86_64 python3-dnf-4.19.2-1.fc40.noarch yum-4.19.2-1.fc40.noarch dnf5-5.1.17-1.fc40.x86_64 dnf5-plugins-5.1.17-1.fc40.x86_64 Finish: chroot init Start: build phase for copr-backend-1.177-1.git.11.f31c7c4.fc40.src.rpm Start: build setup for copr-backend-1.177-1.git.11.f31c7c4.fc40.src.rpm Building target platforms: x86_64 Building for target x86_64 setting SOURCE_DATE_EPOCH=1716249600 Wrote: /builddir/build/SRPMS/copr-backend-1.177-1.git.11.f31c7c4.fc40.src.rpm Updating and loading repositories: updates 100% | 188.9 KiB/s | 18.9 KiB | 00m00s fedora 100% | 105.9 KiB/s | 29.1 KiB | 00m00s Additional repo copr_copr_copr_dev 100% | 43.5 KiB/s | 1.5 KiB | 00m00s Copr repository 100% | 138.0 KiB/s | 1.5 KiB | 00m00s Repositories loaded. Package "util-linux-2.40.1-1.fc40.x86_64" is already installed. Package Arch Version Repository Size Installing: asciidoc noarch 10.2.0-9.fc40 fedora 1.7 MiB createrepo_c x86_64 1.0.4-1.fc40 fedora 195.2 KiB dnf noarch 4.19.2-1.fc40 updates 2.5 MiB libappstream-glib-builder x86_64 0.8.2-6.fc40 fedora 274.0 KiB libxslt x86_64 1.1.39-3.fc40 fedora 481.6 KiB make x86_64 1:4.4.1-6.fc40 fedora 1.8 MiB modulemd-tools noarch 0.16-6.fc40 fedora 222.7 KiB prunerepo noarch 1.25-5.fc40 fedora 55.1 KiB python3-cachetools noarch 5.3.2-3.fc40 fedora 142.0 KiB python3-copr noarch 1.132-1.git.0.8de7a69.fc40 copr_copr_copr_dev 243.4 KiB python3-copr-common noarch 0.24-1.git.0.8de7a69.fc40 copr_copr_copr_dev 170.7 KiB python3-daemon noarch 2.3.2-6.fc40 fedora 157.8 KiB python3-dateutil noarch 1:2.8.2-13.fc40 fedora 877.8 KiB python3-devel x86_64 3.12.3-2.fc40 updates 1.2 MiB python3-distro noarch 1.9.0-3.fc40 fedora 201.9 KiB python3-filelock noarch 3.13.1-1.fc40 fedora 57.2 KiB python3-gobject x86_64 3.48.2-1.fc40 updates 23.9 KiB python3-httpretty noarch 1.1.4-17.fc39 fedora 192.8 KiB python3-humanize noarch 3.13.1-10.fc40 fedora 184.1 KiB python3-munch noarch 2.5.0-15.fc40 fedora 61.5 KiB python3-netaddr noarch 0.10.1-4.fc40 fedora 11.0 MiB python3-packaging noarch 23.2-4.fc40 fedora 421.1 KiB python3-pytest noarch 7.4.3-3.fc40 fedora 15.0 MiB python3-pytz noarch 2024.1-1.fc40 fedora 225.8 KiB python3-requests noarch 2.31.0-3.fc40 fedora 462.4 KiB python3-resalloc noarch 5.5-1.fc40 updates 56.5 KiB python3-retask noarch 1.1.0-5.fc40 fedora 30.6 KiB python3-setproctitle x86_64 1.2.3-7.fc40 fedora 35.3 KiB python3-setuptools noarch 69.0.3-3.fc40 fedora 7.1 MiB python3-sphinx noarch 1:7.2.6-6.fc40 fedora 10.8 MiB python3-tabulate noarch 0.9.0-6.fc40 fedora 343.7 KiB python3-zstandard x86_64 0.22.0-3.fc40 fedora 2.0 MiB redis x86_64 7.2.5-1.fc40 updates 5.2 MiB rsync x86_64 3.3.0-1.fc40 updates 767.7 KiB systemd x86_64 255.7-1.fc40 updates 14.6 MiB Installing dependencies: abattis-cantarell-vf-fonts noarch 0.301-12.fc40 fedora 192.7 KiB adobe-mappings-cmap noarch 20230622-3.fc40 fedora 14.4 MiB adobe-mappings-cmap-deprecated noarch 20230622-3.fc40 fedora 582.1 KiB adobe-mappings-pdf noarch 20190401-7.fc40 fedora 4.4 MiB adwaita-cursor-theme noarch 46.2-2.fc40 updates 10.0 MiB adwaita-icon-theme noarch 46.2-2.fc40 updates 1.2 MiB adwaita-icon-theme-legacy noarch 46.2-1.fc40 updates 2.1 MiB at-spi2-atk x86_64 2.52.0-1.fc40 fedora 287.9 KiB at-spi2-core x86_64 2.52.0-1.fc40 fedora 1.5 MiB atk x86_64 2.52.0-1.fc40 fedora 252.7 KiB avahi-glib x86_64 0.8-26.fc40 fedora 19.6 KiB avahi-libs x86_64 0.8-26.fc40 fedora 166.3 KiB boost-regex x86_64 1.83.0-5.fc40 updates 271.0 KiB cairo x86_64 1.18.0-3.fc40 fedora 1.7 MiB cairo-gobject x86_64 1.18.0-3.fc40 fedora 35.2 KiB colord-libs x86_64 1.4.7-3.fc40 fedora 839.1 KiB createrepo_c-libs x86_64 1.0.4-1.fc40 fedora 273.8 KiB crypto-policies-scripts noarch 20240510-1.gitd287a42.fc40 updates 313.8 KiB ctags x86_64 6.0.0-5.fc40 fedora 2.0 MiB cups-libs x86_64 1:2.4.8-3.fc40 updates 618.9 KiB dbus x86_64 1:1.14.10-3.fc40 fedora 0.0 B dbus-broker x86_64 36-2.fc40 updates 378.8 KiB dbus-common noarch 1:1.14.10-3.fc40 fedora 11.2 KiB dbus-libs x86_64 1:1.14.10-3.fc40 fedora 368.9 KiB default-fonts-core-sans noarch 4.0-13.fc40 updates 11.9 KiB dnf-data noarch 4.19.2-1.fc40 updates 38.8 KiB dnf-plugins-core noarch 4.6.0-1.fc40 updates 22.4 KiB docbook-dtds noarch 1.0-85.fc40 fedora 8.3 MiB docbook-style-xsl noarch 1.79.2-22.fc40 fedora 15.6 MiB drpm x86_64 0.5.2-5.fc40 fedora 131.6 KiB expat x86_64 2.6.2-1.fc40 updates 280.8 KiB fontconfig x86_64 2.15.0-6.fc40 updates 768.0 KiB fonts-filesystem noarch 1:2.0.5-14.fc40 fedora 0.0 B freetype x86_64 2.13.2-5.fc40 fedora 842.6 KiB fribidi x86_64 1.0.13-4.fc40 fedora 365.3 KiB gc x86_64 8.2.2-6.fc40 fedora 258.7 KiB gd x86_64 2.3.3-16.fc40 fedora 399.7 KiB gdk-pixbuf2 x86_64 2.42.10-8.fc40 fedora 2.5 MiB gdk-pixbuf2-modules x86_64 2.42.10-8.fc40 fedora 252.1 KiB glib2 x86_64 2.80.2-1.fc40 updates 14.6 MiB gnupg2 x86_64 2.4.4-1.fc40 fedora 9.5 MiB gnutls x86_64 3.8.5-1.fc40 updates 3.2 MiB gobject-introspection x86_64 1.80.1-1.fc40 updates 322.1 KiB google-droid-sans-fonts noarch 20200215-19.fc40 fedora 6.3 MiB google-noto-fonts-common noarch 20240301-2.fc40 fedora 17.5 KiB google-noto-sans-vf-fonts noarch 20240301-2.fc40 fedora 1.2 MiB gpgme x86_64 1.23.2-3.fc40 fedora 575.3 KiB gpgmepp x86_64 1.23.2-3.fc40 fedora 424.2 KiB graphite2 x86_64 1.3.14-15.fc40 fedora 192.0 KiB graphviz x86_64 9.0.0-11.fc40 fedora 21.1 MiB gtk-update-icon-cache x86_64 3.24.42-2.fc40 updates 66.3 KiB gtk3 x86_64 3.24.42-2.fc40 updates 22.4 MiB gts x86_64 0.7.6-48.20121130.fc40 fedora 650.3 KiB guile30 x86_64 3.0.7-12.fc40 fedora 51.5 MiB harfbuzz x86_64 8.4.0-1.fc40 updates 2.6 MiB hicolor-icon-theme noarch 0.17-18.fc40 fedora 72.2 KiB highway x86_64 1.1.0-1.fc40 fedora 3.2 MiB ima-evm-utils x86_64 1.5-4.fc40 fedora 144.9 KiB jbig2dec-libs x86_64 0.20-4.fc40 fedora 169.0 KiB jbigkit-libs x86_64 2.1-29.fc40 fedora 117.6 KiB json-c x86_64 0.17-3.fc40 fedora 82.4 KiB json-glib x86_64 1.8.0-3.fc40 fedora 561.4 KiB kmod-libs x86_64 31-5.fc40 fedora 143.2 KiB lasi x86_64 1.1.3-13.fc40 fedora 130.8 KiB lcms2 x86_64 2.16-3.fc40 fedora 420.9 KiB libICE x86_64 1.1.1-3.fc40 fedora 181.2 KiB libSM x86_64 1.2.4-3.fc40 fedora 97.3 KiB libX11 x86_64 1.8.9-1.fc40 updates 1.3 MiB libX11-common noarch 1.8.9-1.fc40 updates 1.1 MiB libXau x86_64 1.0.11-6.fc40 fedora 66.9 KiB libXcomposite x86_64 0.4.6-3.fc40 fedora 44.5 KiB libXcursor x86_64 1.2.1-7.fc40 fedora 49.5 KiB libXdamage x86_64 1.1.6-3.fc40 fedora 43.7 KiB libXext x86_64 1.3.6-1.fc40 fedora 90.1 KiB libXfixes x86_64 6.0.1-3.fc40 fedora 30.3 KiB libXft x86_64 2.3.8-6.fc40 fedora 164.5 KiB libXi x86_64 1.8.1-5.fc40 fedora 80.7 KiB libXinerama x86_64 1.1.5-6.fc40 fedora 19.0 KiB libXpm x86_64 3.5.17-3.fc40 fedora 148.4 KiB libXrandr x86_64 1.5.4-3.fc40 fedora 51.9 KiB libXrender x86_64 0.9.11-6.fc40 fedora 50.1 KiB libXt x86_64 1.3.0-3.fc40 fedora 425.9 KiB libXtst x86_64 1.2.4-6.fc40 fedora 33.6 KiB libaom x86_64 3.9.0-1.fc40 updates 5.0 MiB libappstream-glib x86_64 0.8.2-6.fc40 fedora 1.4 MiB libassuan x86_64 2.5.7-1.fc40 fedora 163.8 KiB libavif x86_64 1.0.4-3.fc40 updates 183.8 KiB libb2 x86_64 0.98.1-11.fc40 fedora 42.2 KiB libcloudproviders x86_64 0.3.5-3.fc40 fedora 128.2 KiB libcomps x86_64 0.1.20-5.fc40 fedora 205.4 KiB libdatrie x86_64 0.2.13-9.fc40 fedora 57.9 KiB libdav1d x86_64 1.4.0-1.fc40 fedora 1.7 MiB libdnf x86_64 0.73.1-1.fc40 updates 2.1 MiB libepoxy x86_64 1.5.10-6.fc40 fedora 1.1 MiB libfsverity x86_64 1.4-12.fc40 fedora 32.6 KiB libgcrypt x86_64 1.10.3-3.fc40 fedora 1.3 MiB libgpg-error x86_64 1.49-1.fc40 updates 875.2 KiB libgs x86_64 10.02.1-8.fc40 fedora 23.2 MiB libgusb x86_64 0.4.9-1.fc40 updates 162.1 KiB libicu x86_64 74.2-1.fc40 fedora 34.9 MiB libijs x86_64 0.35-22.fc40 fedora 61.6 KiB libimagequant x86_64 4.0.3-3.fc40 fedora 690.3 KiB libjpeg-turbo x86_64 3.0.2-1.fc40 fedora 776.9 KiB libjxl x86_64 1:0.8.2-6.fc40 fedora 4.1 MiB libksba x86_64 1.6.6-1.fc40 fedora 392.9 KiB liblerc x86_64 4.0.0-6.fc40 fedora 603.5 KiB libmodulemd x86_64 2.15.0-12.fc40 updates 717.2 KiB libpaper x86_64 1:2.1.1-3.fc40 fedora 48.8 KiB libpng x86_64 2:1.6.40-3.fc40 fedora 241.8 KiB librepo x86_64 1.17.1-1.fc40 updates 244.3 KiB libreport-filesystem noarch 2.17.15-1.fc40 fedora 0.0 B librsvg2 x86_64 2.57.1-6.fc40 updates 4.1 MiB libseccomp x86_64 2.5.3-8.fc40 fedora 171.2 KiB libsolv x86_64 0.7.29-1.fc40 updates 924.3 KiB libsoup3 x86_64 3.4.4-3.fc40 fedora 1.1 MiB libstemmer x86_64 2.2.0-10.fc40 fedora 599.9 KiB libthai x86_64 0.1.29-8.fc40 fedora 783.5 KiB libtiff x86_64 4.6.0-2.fc40 fedora 1.1 MiB libtracker-sparql x86_64 3.7.3-1.fc40 updates 1.0 MiB libusb1 x86_64 1.0.27-2.fc40 updates 162.3 KiB libvmaf x86_64 2.3.0-7.fc40 fedora 779.6 KiB libwayland-client x86_64 1.22.0-3.fc40 fedora 58.1 KiB libwayland-cursor x86_64 1.22.0-3.fc40 fedora 37.0 KiB libwayland-egl x86_64 1.22.0-3.fc40 fedora 16.5 KiB libwebp x86_64 1.3.2-5.fc40 fedora 793.6 KiB libxcb x86_64 1.17.0-1.fc40 updates 1.1 MiB libxkbcommon x86_64 1.6.0-2.fc40 fedora 328.3 KiB libyaml x86_64 0.2.5-14.fc40 fedora 130.4 KiB logrotate x86_64 3.21.0-6.fc40 fedora 152.0 KiB mpdecimal x86_64 2.5.1-9.fc40 fedora 200.9 KiB netpbm x86_64 11.02.00-6.fc40 fedora 573.1 KiB nettle x86_64 3.9.1-6.fc40 fedora 790.1 KiB npth x86_64 1.7-1.fc40 fedora 49.6 KiB nspr x86_64 4.35.0-23.fc40 updates 312.4 KiB nss x86_64 3.100.0-1.fc40 updates 1.9 MiB nss-softokn x86_64 3.100.0-1.fc40 updates 1.9 MiB nss-softokn-freebl x86_64 3.100.0-1.fc40 updates 896.4 KiB nss-sysinit x86_64 3.100.0-1.fc40 updates 18.2 KiB nss-util x86_64 3.100.0-1.fc40 updates 226.1 KiB openjpeg2 x86_64 2.5.2-1.fc40 fedora 441.7 KiB pango x86_64 1.52.2-1.fc40 updates 995.9 KiB pixman x86_64 0.43.4-1.fc40 updates 710.1 KiB poppler x86_64 24.02.0-2.fc40 fedora 3.5 MiB poppler-data noarch 0.4.11-7.fc40 fedora 12.3 MiB poppler-glib x86_64 24.02.0-2.fc40 fedora 575.1 KiB pyproject-rpm-macros noarch 1.12.0-1.fc40 fedora 98.8 KiB python-pip-wheel noarch 23.3.2-1.fc40 fedora 1.5 MiB python-rpm-macros noarch 3.12-7.fc40 fedora 22.1 KiB python3 x86_64 3.12.3-2.fc40 updates 31.5 KiB python3-alembic noarch 1.13.1-3.fc40 fedora 2.6 MiB python3-babel noarch 2.15.0-1.fc40 updates 28.4 MiB python3-blinker noarch 1.7.0-1.fc40 fedora 108.8 KiB python3-cairo x86_64 1.25.1-3.fc40 fedora 492.5 KiB python3-charset-normalizer noarch 3.3.2-3.fc40 fedora 312.7 KiB python3-click noarch 8.1.7-4.fc40 fedora 1.1 MiB python3-createrepo_c x86_64 1.0.4-1.fc40 fedora 155.5 KiB python3-dbus x86_64 1.3.2-6.fc40 fedora 523.5 KiB python3-decorator noarch 5.1.1-9.fc40 fedora 77.3 KiB python3-defusedxml noarch 0.7.1-12.fc40 fedora 197.2 KiB python3-dnf noarch 4.19.2-1.fc40 updates 2.6 MiB python3-dnf-plugins-core noarch 4.6.0-1.fc40 updates 1.2 MiB python3-docutils noarch 0.20.1-3.fc40 fedora 4.8 MiB python3-flask noarch 1:3.0.3-4.fc40 updates 876.2 KiB python3-gobject-base x86_64 3.48.2-1.fc40 updates 1.4 MiB python3-greenlet x86_64 3.0.3-3.fc40 fedora 920.8 KiB python3-gssapi x86_64 1.7.3-8.fc40 fedora 2.7 MiB python3-hawkey x86_64 0.73.1-1.fc40 updates 305.9 KiB python3-idna noarch 3.7-1.fc40 updates 594.6 KiB python3-imagesize noarch 1.4.1-7.fc40 fedora 34.7 KiB python3-iniconfig noarch 1.1.1-16.fc40 fedora 20.5 KiB python3-itsdangerous noarch 2.1.2-7.fc40 fedora 95.5 KiB python3-jinja2 noarch 3.1.4-1.fc40 updates 2.9 MiB python3-koji noarch 1.34.0-3.fc40 fedora 2.1 MiB python3-libcomps x86_64 0.1.20-5.fc40 fedora 143.6 KiB python3-libdnf x86_64 0.73.1-1.fc40 updates 3.8 MiB python3-libmodulemd x86_64 2.15.0-12.fc40 updates 15.2 KiB python3-libs x86_64 3.12.3-2.fc40 updates 40.9 MiB python3-lockfile noarch 1:0.12.2-13.fc40 fedora 77.4 KiB python3-mako noarch 1.2.3-6.fc40 fedora 700.8 KiB python3-markupsafe x86_64 2.1.3-4.fc40 fedora 56.3 KiB python3-pluggy noarch 1.3.0-3.fc40 fedora 182.5 KiB python3-pygments noarch 2.17.2-3.fc40 fedora 10.3 MiB python3-pyyaml x86_64 6.0.1-14.fc40 fedora 786.4 KiB python3-redis noarch 5.0.4-1.fc40 updates 2.3 MiB python3-requests-gssapi noarch 1.2.3-11.fc40 fedora 61.3 KiB python3-requests-toolbelt noarch 1.0.0-5.fc40 fedora 300.2 KiB python3-rpm x86_64 4.19.1.1-1.fc40 fedora 171.5 KiB python3-rpm-generators noarch 14-10.fc40 fedora 81.7 KiB python3-rpm-macros noarch 3.12-7.fc40 fedora 6.4 KiB python3-six noarch 1.16.0-14.fc40 fedora 117.7 KiB python3-snowballstemmer noarch 2.2.0-10.fc40 fedora 1.7 MiB python3-sphinx-theme-alabaster noarch 0.7.16-3.fc40 fedora 41.9 KiB python3-sqlalchemy x86_64 2.0.30-1.fc40 updates 22.4 MiB python3-systemd x86_64 235-9.fc40 fedora 354.7 KiB python3-typing-extensions noarch 4.9.0-3.fc40 fedora 391.0 KiB python3-urllib3 noarch 1.26.18-3.fc40 fedora 996.2 KiB python3-werkzeug noarch 3.0.3-1.fc40 updates 1.8 MiB rav1e-libs x86_64 0.7.1-2.fc40 updates 3.0 MiB rpm-sign-libs x86_64 4.19.1.1-1.fc40 fedora 39.4 KiB rsvg-pixbuf-loader x86_64 2.57.1-6.fc40 updates 15.5 KiB sgml-common noarch 0.6.3-63.fc40 fedora 168.1 KiB shared-mime-info x86_64 2.3-5.fc40 updates 5.2 MiB source-highlight x86_64 3.1.9-22.fc40 fedora 3.1 MiB svt-av1-libs x86_64 2.1.0-1.fc40 updates 7.0 MiB systemd-pam x86_64 255.7-1.fc40 updates 1.0 MiB systemd-rpm-macros noarch 255.7-1.fc40 updates 9.5 KiB tpm2-tss x86_64 4.1.3-1.fc40 updates 1.5 MiB tzdata noarch 2024a-5.fc40 updates 1.6 MiB urw-base35-bookman-fonts noarch 20200910-20.fc40 updates 1.4 MiB urw-base35-c059-fonts noarch 20200910-20.fc40 updates 1.4 MiB urw-base35-d050000l-fonts noarch 20200910-20.fc40 updates 84.3 KiB urw-base35-fonts noarch 20200910-20.fc40 updates 5.3 KiB urw-base35-fonts-common noarch 20200910-20.fc40 updates 37.4 KiB urw-base35-gothic-fonts noarch 20200910-20.fc40 updates 1.2 MiB urw-base35-nimbus-mono-ps-fonts noarch 20200910-20.fc40 updates 1.0 MiB urw-base35-nimbus-roman-fonts noarch 20200910-20.fc40 updates 1.4 MiB urw-base35-nimbus-sans-fonts noarch 20200910-20.fc40 updates 2.4 MiB urw-base35-p052-fonts noarch 20200910-20.fc40 updates 1.5 MiB urw-base35-standard-symbols-ps-fonts noarch 20200910-20.fc40 updates 64.9 KiB urw-base35-z003-fonts noarch 20200910-20.fc40 updates 390.8 KiB xkeyboard-config noarch 2.41-1.fc40 fedora 6.6 MiB xml-common noarch 0.6.3-63.fc40 fedora 78.4 KiB xprop x86_64 1.2.7-1.fc40 fedora 54.8 KiB zchunk-libs x86_64 1.4.0-2.fc40 fedora 97.1 KiB Transaction Summary: Installing: 259 packages Total size of inbound packages is 144 MiB. Need to download 144 MiB. After this operation 597 MiB will be used (install 597 MiB, remove 0 B). [ 1/259] createrepo_c-0:1.0.4-1.fc40.x 100% | 7.7 MiB/s | 79.0 KiB | 00m00s [ 2/259] make-1:4.4.1-6.fc40.x86_64 100% | 114.8 MiB/s | 587.6 KiB | 00m00s [ 3/259] asciidoc-0:10.2.0-9.fc40.noar 100% | 21.5 MiB/s | 418.4 KiB | 00m00s [ 4/259] libappstream-glib-builder-0:0 100% | 2.1 MiB/s | 90.6 KiB | 00m00s [ 5/259] python3-cachetools-0:5.3.2-3. 100% | 18.1 MiB/s | 37.1 KiB | 00m00s [ 6/259] prunerepo-0:1.25-5.fc40.noarc 100% | 1.3 MiB/s | 36.8 KiB | 00m00s [ 7/259] python3-dateutil-1:2.8.2-13.f 100% | 173.8 MiB/s | 355.9 KiB | 00m00s [ 8/259] python3-distro-0:1.9.0-3.fc40 100% | 24.3 MiB/s | 49.8 KiB | 00m00s [ 9/259] python3-filelock-0:3.13.1-1.f 100% | 35.4 MiB/s | 36.2 KiB | 00m00s [ 10/259] modulemd-tools-0:0.16-6.fc40. 100% | 2.2 MiB/s | 99.4 KiB | 00m00s [ 11/259] python3-daemon-0:2.3.2-6.fc40 100% | 1.3 MiB/s | 55.2 KiB | 00m00s [ 12/259] python3-humanize-0:3.13.1-10. 100% | 2.7 MiB/s | 70.7 KiB | 00m00s [ 13/259] python3-munch-0:2.5.0-15.fc40 100% | 12.6 MiB/s | 25.9 KiB | 00m00s [ 14/259] python3-packaging-0:23.2-4.fc 100% | 61.2 MiB/s | 125.2 KiB | 00m00s [ 15/259] python3-httpretty-0:1.1.4-17. 100% | 1.7 MiB/s | 69.8 KiB | 00m00s [ 16/259] python3-pytest-0:7.4.3-3.fc40 100% | 237.1 MiB/s | 1.9 MiB | 00m00s [ 17/259] python3-pytz-0:2024.1-1.fc40. 100% | 12.5 MiB/s | 64.1 KiB | 00m00s [ 18/259] python3-requests-0:2.31.0-3.f 100% | 74.1 MiB/s | 151.7 KiB | 00m00s [ 19/259] python3-setproctitle-0:1.2.3- 100% | 3.6 MiB/s | 21.9 KiB | 00m00s [ 20/259] python3-netaddr-0:0.10.1-4.fc 100% | 71.3 MiB/s | 1.7 MiB | 00m00s [ 21/259] python3-setuptools-0:69.0.3-3 100% | 191.3 MiB/s | 1.5 MiB | 00m00s [ 22/259] python3-tabulate-0:0.9.0-6.fc 100% | 34.1 MiB/s | 69.9 KiB | 00m00s [ 23/259] python3-zstandard-0:0.22.0-3. 100% | 94.3 MiB/s | 482.8 KiB | 00m00s [ 24/259] python3-retask-0:1.1.0-5.fc40 100% | 721.1 KiB/s | 19.5 KiB | 00m00s [ 25/259] libxslt-0:1.1.39-3.fc40.x86_6 100% | 61.4 MiB/s | 188.6 KiB | 00m00s [ 26/259] dnf-0:4.19.2-1.fc40.noarch 100% | 61.6 MiB/s | 504.3 KiB | 00m00s [ 27/259] python3-sphinx-1:7.2.6-6.fc40 100% | 79.3 MiB/s | 2.6 MiB | 00m00s [ 28/259] python3-devel-0:3.12.3-2.fc40 100% | 101.9 MiB/s | 313.0 KiB | 00m00s [ 29/259] python3-gobject-0:3.48.2-1.fc 100% | 4.0 MiB/s | 16.3 KiB | 00m00s [ 30/259] python3-resalloc-0:5.5-1.fc40 100% | 720.9 KiB/s | 33.2 KiB | 00m00s [ 31/259] redis-0:7.2.5-1.fc40.x86_64 100% | 21.1 MiB/s | 1.5 MiB | 00m00s [ 32/259] rsync-0:3.3.0-1.fc40.x86_64 100% | 136.9 MiB/s | 420.6 KiB | 00m00s [ 33/259] systemd-0:255.7-1.fc40.x86_64 100% | 120.3 MiB/s | 4.9 MiB | 00m00s [ 34/259] docbook-style-xsl-0:1.79.2-22 100% | 137.8 MiB/s | 1.5 MiB | 00m00s [ 35/259] createrepo_c-libs-0:1.0.4-1.f 100% | 108.5 MiB/s | 111.1 KiB | 00m00s [ 36/259] cairo-0:1.18.0-3.fc40.x86_64 100% | 46.2 MiB/s | 708.9 KiB | 00m00s [ 37/259] freetype-0:2.13.2-5.fc40.x86_ 100% | 66.7 MiB/s | 409.7 KiB | 00m00s [ 38/259] gdk-pixbuf2-0:2.42.10-8.fc40. 100% | 157.8 MiB/s | 484.7 KiB | 00m00s [ 39/259] json-glib-0:1.8.0-3.fc40.x86_ 100% | 81.4 MiB/s | 166.7 KiB | 00m00s [ 40/259] libappstream-glib-0:0.8.2-6.f 100% | 133.0 MiB/s | 408.5 KiB | 00m00s [ 41/259] guile30-0:3.0.7-12.fc40.x86_6 100% | 301.8 MiB/s | 8.1 MiB | 00m00s [ 42/259] python3-createrepo_c-0:1.0.4- 100% | 10.5 MiB/s | 54.0 KiB | 00m00s [ 43/259] python3-copr-common-0:0.24-1. 100% | 220.0 KiB/s | 59.0 KiB | 00m00s [ 44/259] python3-koji-0:1.34.0-3.fc40. 100% | 135.1 MiB/s | 414.9 KiB | 00m00s [ 45/259] python3-pyyaml-0:6.0.1-14.fc4 100% | 113.7 MiB/s | 232.8 KiB | 00m00s [ 46/259] python3-rpm-0:4.19.1.1-1.fc40 100% | 13.1 MiB/s | 66.8 KiB | 00m00s [ 47/259] python3-lockfile-1:0.12.2-13. 100% | 19.1 MiB/s | 39.2 KiB | 00m00s [ 48/259] python3-docutils-0:0.20.1-3.f 100% | 130.8 MiB/s | 1.0 MiB | 00m00s [ 49/259] python3-six-0:1.16.0-14.fc40. 100% | 20.0 MiB/s | 40.9 KiB | 00m00s [ 50/259] python3-iniconfig-0:1.1.1-16. 100% | 8.8 MiB/s | 17.9 KiB | 00m00s [ 51/259] python3-charset-normalizer-0: 100% | 52.4 MiB/s | 107.3 KiB | 00m00s [ 52/259] python3-pluggy-0:1.3.0-3.fc40 100% | 10.7 MiB/s | 55.0 KiB | 00m00s [ 53/259] python3-urllib3-0:1.26.18-3.f 100% | 89.3 MiB/s | 274.2 KiB | 00m00s [ 54/259] python3-imagesize-0:1.4.1-7.f 100% | 5.3 MiB/s | 21.9 KiB | 00m00s [ 55/259] python3-snowballstemmer-0:2.2 100% | 41.9 MiB/s | 257.2 KiB | 00m00s [ 56/259] python3-pygments-0:2.17.2-3.f 100% | 154.3 MiB/s | 2.5 MiB | 00m00s [ 57/259] python3-sphinx-theme-alabaste 100% | 3.1 MiB/s | 28.3 KiB | 00m00s [ 58/259] python3-dnf-0:4.19.2-1.fc40.n 100% | 193.3 MiB/s | 593.8 KiB | 00m00s [ 59/259] python3-copr-0:1.132-1.git.0. 100% | 264.0 KiB/s | 82.4 KiB | 00m00s [ 60/259] python3-requests-gssapi-0:1.2 100% | 10.5 MiB/s | 32.2 KiB | 00m00s [ 61/259] python3-requests-toolbelt-0:1 100% | 56.2 MiB/s | 115.0 KiB | 00m00s [ 62/259] python3-gobject-base-0:3.48.2 100% | 45.8 MiB/s | 375.2 KiB | 00m00s [ 63/259] cairo-gobject-0:1.18.0-3.fc40 100% | 2.4 MiB/s | 17.5 KiB | 00m00s [ 64/259] python3-libs-0:3.12.3-2.fc40. 100% | 261.0 MiB/s | 9.1 MiB | 00m00s [ 65/259] python3-cairo-0:1.25.1-3.fc40 100% | 4.2 MiB/s | 124.6 KiB | 00m00s [ 66/259] systemd-pam-0:255.7-1.fc40.x8 100% | 188.7 MiB/s | 386.4 KiB | 00m00s [ 67/259] dbus-1:1.14.10-3.fc40.x86_64 100% | 7.8 MiB/s | 8.0 KiB | 00m00s [ 68/259] kmod-libs-0:31-5.fc40.x86_64 100% | 33.3 MiB/s | 68.2 KiB | 00m00s [ 69/259] libseccomp-0:2.5.3-8.fc40.x86 100% | 68.6 MiB/s | 70.3 KiB | 00m00s [ 70/259] python3-alembic-0:1.13.1-3.fc 100% | 11.8 MiB/s | 485.3 KiB | 00m00s [ 71/259] docbook-dtds-0:1.0-85.fc40.no 100% | 54.5 MiB/s | 335.2 KiB | 00m00s [ 72/259] xml-common-0:0.6.3-63.fc40.no 100% | 6.1 MiB/s | 31.0 KiB | 00m00s [ 73/259] drpm-0:0.5.2-5.fc40.x86_64 100% | 31.3 MiB/s | 64.1 KiB | 00m00s [ 74/259] zchunk-libs-0:1.4.0-2.fc40.x8 100% | 25.5 MiB/s | 52.2 KiB | 00m00s [ 75/259] libXext-0:1.3.6-1.fc40.x86_64 100% | 9.5 MiB/s | 38.9 KiB | 00m00s [ 76/259] libpng-2:1.6.40-3.fc40.x86_64 100% | 58.6 MiB/s | 119.9 KiB | 00m00s [ 77/259] libXrender-0:0.9.11-6.fc40.x8 100% | 6.7 MiB/s | 27.4 KiB | 00m00s [ 78/259] libjpeg-turbo-0:3.0.2-1.fc40. 100% | 73.8 MiB/s | 226.7 KiB | 00m00s [ 79/259] libstemmer-0:2.2.0-10.fc40.x8 100% | 27.1 MiB/s | 138.8 KiB | 00m00s [ 80/259] gc-0:8.2.2-6.fc40.x86_64 100% | 53.8 MiB/s | 110.2 KiB | 00m00s [ 81/259] python3-defusedxml-0:0.7.1-12 100% | 28.9 MiB/s | 59.1 KiB | 00m00s [ 82/259] libyaml-0:0.2.5-14.fc40.x86_6 100% | 28.9 MiB/s | 59.2 KiB | 00m00s [ 83/259] rpm-sign-libs-0:4.19.1.1-1.fc 100% | 8.7 MiB/s | 26.7 KiB | 00m00s [ 84/259] dnf-data-0:4.19.2-1.fc40.noar 100% | 9.7 MiB/s | 39.6 KiB | 00m00s [ 85/259] logrotate-0:3.21.0-6.fc40.x86 100% | 1.8 MiB/s | 74.5 KiB | 00m00s [ 86/259] python3-hawkey-0:0.73.1-1.fc4 100% | 34.2 MiB/s | 104.9 KiB | 00m00s [ 87/259] python3-libcomps-0:0.1.20-5.f 100% | 11.6 MiB/s | 47.7 KiB | 00m00s [ 88/259] libb2-0:0.98.1-11.fc40.x86_64 100% | 8.3 MiB/s | 25.5 KiB | 00m00s [ 89/259] mpdecimal-0:2.5.1-9.fc40.x86_ 100% | 28.8 MiB/s | 88.6 KiB | 00m00s [ 90/259] python-pip-wheel-0:23.3.2-1.f 100% | 210.1 MiB/s | 1.5 MiB | 00m00s [ 91/259] python3-libdnf-0:0.73.1-1.fc4 100% | 37.7 MiB/s | 848.2 KiB | 00m00s [ 92/259] python3-gssapi-0:1.7.3-8.fc40 100% | 30.5 MiB/s | 656.0 KiB | 00m00s [ 93/259] python3-typing-extensions-0:4 100% | 37.4 MiB/s | 76.6 KiB | 00m00s [ 94/259] python3-mako-0:1.2.3-6.fc40.n 100% | 23.3 MiB/s | 214.6 KiB | 00m00s [ 95/259] sgml-common-0:0.6.3-63.fc40.n 100% | 11.9 MiB/s | 61.0 KiB | 00m00s [ 96/259] ima-evm-utils-0:1.5-4.fc40.x8 100% | 30.4 MiB/s | 62.2 KiB | 00m00s [ 97/259] libfsverity-0:1.4-12.fc40.x86 100% | 9.1 MiB/s | 18.7 KiB | 00m00s [ 98/259] libreport-filesystem-0:2.17.1 100% | 13.8 MiB/s | 14.1 KiB | 00m00s [ 99/259] libcomps-0:0.1.20-5.fc40.x86_ 100% | 37.7 MiB/s | 77.1 KiB | 00m00s [100/259] libdnf-0:0.73.1-1.fc40.x86_64 100% | 170.3 MiB/s | 697.7 KiB | 00m00s [101/259] python3-decorator-0:5.1.1-9.f 100% | 14.9 MiB/s | 30.5 KiB | 00m00s [102/259] python3-markupsafe-0:2.1.3-4. 100% | 14.7 MiB/s | 30.1 KiB | 00m00s [103/259] libassuan-0:2.5.7-1.fc40.x86_ 100% | 32.6 MiB/s | 66.9 KiB | 00m00s [104/259] libksba-0:1.6.6-1.fc40.x86_64 100% | 38.7 MiB/s | 158.7 KiB | 00m00s [105/259] npth-0:1.7-1.fc40.x86_64 100% | 24.4 MiB/s | 25.0 KiB | 00m00s [106/259] libgcrypt-0:1.10.3-3.fc40.x86 100% | 49.2 MiB/s | 504.1 KiB | 00m00s [107/259] json-c-0:0.17-3.fc40.x86_64 100% | 21.5 MiB/s | 44.0 KiB | 00m00s [108/259] systemd-rpm-macros-0:255.7-1. 100% | 14.9 MiB/s | 30.5 KiB | 00m00s [109/259] pyproject-rpm-macros-0:1.12.0 100% | 20.2 MiB/s | 41.4 KiB | 00m00s [110/259] python-rpm-macros-0:3.12-7.fc 100% | 8.8 MiB/s | 18.0 KiB | 00m00s [111/259] python3-rpm-generators-0:14-1 100% | 14.5 MiB/s | 29.6 KiB | 00m00s [112/259] python3-rpm-macros-0:3.12-7.f 100% | 6.2 MiB/s | 12.8 KiB | 00m00s [113/259] python3-0:3.12.3-2.fc40.x86_6 100% | 13.3 MiB/s | 27.2 KiB | 00m00s [114/259] python3-idna-0:3.7-1.fc40.noa 100% | 38.7 MiB/s | 118.9 KiB | 00m00s [115/259] python3-jinja2-0:3.1.4-1.fc40 100% | 79.0 MiB/s | 485.3 KiB | 00m00s [116/259] python3-babel-0:2.15.0-1.fc40 100% | 225.2 MiB/s | 6.5 MiB | 00m00s [117/259] tzdata-0:2024a-5.fc40.noarch 100% | 174.8 MiB/s | 716.1 KiB | 00m00s [118/259] gnupg2-0:2.4.4-1.fc40.x86_64 100% | 37.8 MiB/s | 2.7 MiB | 00m00s [119/259] dnf-plugins-core-0:4.6.0-1.fc 100% | 12.2 MiB/s | 37.6 KiB | 00m00s [120/259] python3-dnf-plugins-core-0:4. 100% | 22.1 MiB/s | 317.5 KiB | 00m00s [121/259] python3-dbus-0:1.3.2-6.fc40.x 100% | 21.7 MiB/s | 155.6 KiB | 00m00s [122/259] glib2-0:2.80.2-1.fc40.x86_64 100% | 79.6 MiB/s | 3.0 MiB | 00m00s [123/259] python3-systemd-0:235-9.fc40. 100% | 8.6 MiB/s | 106.2 KiB | 00m00s [124/259] python3-libmodulemd-0:2.15.0- 100% | 6.8 MiB/s | 14.0 KiB | 00m00s [125/259] dbus-libs-1:1.14.10-3.fc40.x8 100% | 30.5 MiB/s | 156.3 KiB | 00m00s [126/259] libmodulemd-0:2.15.0-12.fc40. 100% | 75.6 MiB/s | 232.3 KiB | 00m00s [127/259] libgpg-error-0:1.49-1.fc40.x8 100% | 45.4 MiB/s | 232.4 KiB | 00m00s [128/259] expat-0:2.6.2-1.fc40.x86_64 100% | 55.2 MiB/s | 113.1 KiB | 00m00s [129/259] fonts-filesystem-1:2.0.5-14.f 100% | 1.6 MiB/s | 8.2 KiB | 00m00s [130/259] fontconfig-0:2.15.0-6.fc40.x8 100% | 37.6 MiB/s | 269.8 KiB | 00m00s [131/259] at-spi2-atk-0:2.52.0-1.fc40.x 100% | 12.0 MiB/s | 86.3 KiB | 00m00s [132/259] atk-0:2.52.0-1.fc40.x86_64 100% | 8.7 MiB/s | 80.0 KiB | 00m00s [133/259] gtk3-0:3.24.42-2.fc40.x86_64 100% | 192.4 MiB/s | 5.6 MiB | 00m00s [134/259] python3-redis-0:5.0.4-1.fc40. 100% | 4.5 MiB/s | 538.3 KiB | 00m00s [135/259] colord-libs-0:1.4.7-3.fc40.x8 100% | 13.4 MiB/s | 233.7 KiB | 00m00s [136/259] fribidi-0:1.0.13-4.fc40.x86_6 100% | 9.9 MiB/s | 91.2 KiB | 00m00s [137/259] gdk-pixbuf2-modules-0:2.42.10 100% | 20.9 MiB/s | 85.7 KiB | 00m00s [138/259] hicolor-icon-theme-0:0.17-18. 100% | 12.8 MiB/s | 65.8 KiB | 00m00s [139/259] libXcomposite-0:0.4.6-3.fc40. 100% | 4.7 MiB/s | 24.2 KiB | 00m00s [140/259] libXcursor-0:1.2.1-7.fc40.x86 100% | 5.9 MiB/s | 30.2 KiB | 00m00s [141/259] libXdamage-0:1.1.6-3.fc40.x86 100% | 5.7 MiB/s | 23.3 KiB | 00m00s [142/259] libXi-0:1.8.1-5.fc40.x86_64 100% | 9.7 MiB/s | 39.7 KiB | 00m00s [143/259] libXinerama-0:1.1.5-6.fc40.x8 100% | 751.1 KiB/s | 14.3 KiB | 00m00s [144/259] libcloudproviders-0:0.3.5-3.f 100% | 9.1 MiB/s | 46.4 KiB | 00m00s [145/259] libXfixes-0:6.0.1-3.fc40.x86_ 100% | 703.1 KiB/s | 19.0 KiB | 00m00s [146/259] libepoxy-0:1.5.10-6.fc40.x86_ 100% | 36.2 MiB/s | 222.4 KiB | 00m00s [147/259] libwayland-client-0:1.22.0-3. 100% | 6.2 MiB/s | 31.9 KiB | 00m00s [148/259] libwayland-cursor-0:1.22.0-3. 100% | 3.7 MiB/s | 18.8 KiB | 00m00s [149/259] libwayland-egl-0:1.22.0-3.fc4 100% | 2.4 MiB/s | 12.5 KiB | 00m00s [150/259] libxkbcommon-0:1.6.0-2.fc40.x 100% | 34.6 MiB/s | 141.6 KiB | 00m00s [151/259] at-spi2-core-0:2.52.0-1.fc40. 100% | 52.1 MiB/s | 373.2 KiB | 00m00s [152/259] libXrandr-0:1.5.4-3.fc40.x86_ 100% | 655.8 KiB/s | 27.5 KiB | 00m00s [153/259] lcms2-0:2.16-3.fc40.x86_64 100% | 29.3 MiB/s | 180.2 KiB | 00m00s [154/259] libtiff-0:4.6.0-2.fc40.x86_64 100% | 40.6 MiB/s | 332.4 KiB | 00m00s [155/259] libXtst-0:1.2.4-6.fc40.x86_64 100% | 3.3 MiB/s | 20.4 KiB | 00m00s [156/259] xprop-0:1.2.7-1.fc40.x86_64 100% | 6.8 MiB/s | 34.8 KiB | 00m00s [157/259] jbigkit-libs-0:2.1-29.fc40.x8 100% | 7.4 MiB/s | 53.1 KiB | 00m00s [158/259] xkeyboard-config-0:2.41-1.fc4 100% | 50.2 MiB/s | 975.9 KiB | 00m00s [159/259] liblerc-0:4.0.0-6.fc40.x86_64 100% | 22.8 MiB/s | 210.1 KiB | 00m00s [160/259] libwebp-0:1.3.2-5.fc40.x86_64 100% | 31.1 MiB/s | 286.3 KiB | 00m00s [161/259] pango-0:1.52.2-1.fc40.x86_64 100% | 48.5 MiB/s | 347.4 KiB | 00m00s [162/259] libXft-0:2.3.8-6.fc40.x86_64 100% | 14.1 MiB/s | 72.1 KiB | 00m00s [163/259] libthai-0:0.1.29-8.fc40.x86_6 100% | 41.8 MiB/s | 213.8 KiB | 00m00s [164/259] libdatrie-0:0.2.13-9.fc40.x86 100% | 7.8 MiB/s | 32.0 KiB | 00m00s [165/259] tpm2-tss-0:4.1.3-1.fc40.x86_6 100% | 134.1 MiB/s | 411.9 KiB | 00m00s [166/259] libX11-common-0:1.8.9-1.fc40. 100% | 34.4 MiB/s | 176.1 KiB | 00m00s [167/259] libX11-0:1.8.9-1.fc40.x86_64 100% | 79.1 MiB/s | 648.3 KiB | 00m00s [168/259] nettle-0:3.9.1-6.fc40.x86_64 100% | 59.3 MiB/s | 424.9 KiB | 00m00s [169/259] shared-mime-info-0:2.3-5.fc40 100% | 54.5 MiB/s | 390.4 KiB | 00m00s [170/259] gnutls-0:3.8.5-1.fc40.x86_64 100% | 110.7 MiB/s | 1.1 MiB | 00m00s [171/259] dbus-broker-0:36-2.fc40.x86_6 100% | 83.5 MiB/s | 171.1 KiB | 00m00s [172/259] graphite2-0:1.3.14-15.fc40.x8 100% | 15.4 MiB/s | 94.8 KiB | 00m00s [173/259] dbus-common-1:1.14.10-3.fc40. 100% | 4.8 MiB/s | 14.8 KiB | 00m00s [174/259] harfbuzz-0:8.4.0-1.fc40.x86_6 100% | 91.6 MiB/s | 1.0 MiB | 00m00s [175/259] libgusb-0:0.4.9-1.fc40.x86_64 100% | 10.6 MiB/s | 65.3 KiB | 00m00s [176/259] libxcb-0:1.17.0-1.fc40.x86_64 100% | 33.3 MiB/s | 238.7 KiB | 00m00s [177/259] libXau-0:1.0.11-6.fc40.x86_64 100% | 7.7 MiB/s | 31.7 KiB | 00m00s [178/259] pixman-0:0.43.4-1.fc40.x86_64 100% | 57.3 MiB/s | 293.2 KiB | 00m00s [179/259] gd-0:2.3.3-16.fc40.x86_64 100% | 26.5 MiB/s | 135.7 KiB | 00m00s [180/259] lasi-0:1.1.3-13.fc40.x86_64 100% | 9.0 MiB/s | 55.4 KiB | 00m00s [181/259] gts-0:0.7.6-48.20121130.fc40. 100% | 26.2 MiB/s | 241.8 KiB | 00m00s [182/259] poppler-glib-0:24.02.0-2.fc40 100% | 37.1 MiB/s | 190.0 KiB | 00m00s [183/259] libXpm-0:3.5.17-3.fc40.x86_64 100% | 9.2 MiB/s | 65.7 KiB | 00m00s [184/259] graphviz-0:9.0.0-11.fc40.x86_ 100% | 146.0 MiB/s | 5.0 MiB | 00m00s [185/259] libgs-0:10.02.1-8.fc40.x86_64 100% | 125.9 MiB/s | 3.4 MiB | 00m00s [186/259] libimagequant-0:4.0.3-3.fc40. 100% | 23.0 MiB/s | 305.6 KiB | 00m00s [187/259] netpbm-0:11.02.00-6.fc40.x86_ 100% | 36.1 MiB/s | 184.9 KiB | 00m00s [188/259] adobe-mappings-cmap-deprecate 100% | 22.3 MiB/s | 114.0 KiB | 00m00s [189/259] adobe-mappings-cmap-0:2023062 100% | 133.1 MiB/s | 2.1 MiB | 00m00s [190/259] adobe-mappings-pdf-0:20190401 100% | 34.0 MiB/s | 695.9 KiB | 00m00s [191/259] jbig2dec-libs-0:0.20-4.fc40.x 100% | 14.4 MiB/s | 73.8 KiB | 00m00s [192/259] google-droid-sans-fonts-0:202 100% | 123.1 MiB/s | 2.7 MiB | 00m00s [193/259] libXt-0:1.3.0-3.fc40.x86_64 100% | 24.8 MiB/s | 177.5 KiB | 00m00s [194/259] libijs-0:0.35-22.fc40.x86_64 100% | 4.1 MiB/s | 29.3 KiB | 00m00s [195/259] libpaper-1:2.1.1-3.fc40.x86_6 100% | 3.7 MiB/s | 26.8 KiB | 00m00s [196/259] openjpeg2-0:2.5.2-1.fc40.x86_ 100% | 30.3 MiB/s | 186.2 KiB | 00m00s [197/259] poppler-0:24.02.0-2.fc40.x86_ 100% | 119.2 MiB/s | 1.2 MiB | 00m00s [198/259] libICE-0:1.1.1-3.fc40.x86_64 100% | 12.1 MiB/s | 74.5 KiB | 00m00s [199/259] libSM-0:1.2.4-3.fc40.x86_64 100% | 8.4 MiB/s | 43.0 KiB | 00m00s [200/259] gpgmepp-0:1.23.2-3.fc40.x86_6 100% | 22.6 MiB/s | 138.6 KiB | 00m00s [201/259] gpgme-0:1.23.2-3.fc40.x86_64 100% | 25.7 MiB/s | 210.9 KiB | 00m00s [202/259] source-highlight-0:3.1.9-22.f 100% | 123.4 MiB/s | 757.9 KiB | 00m00s [203/259] ctags-0:6.0.0-5.fc40.x86_64 100% | 97.3 MiB/s | 797.3 KiB | 00m00s [204/259] python3-blinker-0:1.7.0-1.fc4 100% | 9.5 MiB/s | 39.1 KiB | 00m00s [205/259] python3-flask-1:3.0.3-4.fc40. 100% | 22.6 MiB/s | 207.9 KiB | 00m00s [206/259] python3-click-0:8.1.7-4.fc40. 100% | 76.7 MiB/s | 235.7 KiB | 00m00s [207/259] python3-itsdangerous-0:2.1.2- 100% | 9.0 MiB/s | 46.3 KiB | 00m00s [208/259] libsolv-0:0.7.29-1.fc40.x86_6 100% | 139.1 MiB/s | 427.3 KiB | 00m00s [209/259] gobject-introspection-0:1.80. 100% | 54.2 MiB/s | 111.1 KiB | 00m00s [210/259] libusb1-0:1.0.27-2.fc40.x86_6 100% | 18.4 MiB/s | 75.5 KiB | 00m00s [211/259] python3-werkzeug-0:3.0.3-1.fc 100% | 65.1 MiB/s | 466.4 KiB | 00m00s [212/259] librepo-0:1.17.1-1.fc40.x86_6 100% | 24.1 MiB/s | 98.9 KiB | 00m00s [213/259] adwaita-icon-theme-0:46.2-2.f 100% | 49.6 MiB/s | 406.6 KiB | 00m00s [214/259] adwaita-cursor-theme-0:46.2-2 100% | 50.4 MiB/s | 516.2 KiB | 00m00s [215/259] cups-libs-1:2.4.8-3.fc40.x86_ 100% | 42.1 MiB/s | 258.9 KiB | 00m00s [216/259] adwaita-icon-theme-legacy-0:4 100% | 145.7 MiB/s | 2.5 MiB | 00m00s [217/259] avahi-libs-0:0.8-26.fc40.x86_ 100% | 9.3 MiB/s | 66.5 KiB | 00m00s [218/259] gtk-update-icon-cache-0:3.24. 100% | 8.2 MiB/s | 33.7 KiB | 00m00s [219/259] poppler-data-0:0.4.11-7.fc40. 100% | 28.0 MiB/s | 2.0 MiB | 00m00s [220/259] libtracker-sparql-0:3.7.3-1.f 100% | 36.2 MiB/s | 370.5 KiB | 00m00s [221/259] avahi-glib-0:0.8-26.fc40.x86_ 100% | 1.3 MiB/s | 15.1 KiB | 00m00s [222/259] default-fonts-core-sans-0:4.0 100% | 6.1 MiB/s | 31.5 KiB | 00m00s [223/259] libsoup3-0:3.4.4-3.fc40.x86_6 100% | 25.2 MiB/s | 387.2 KiB | 00m00s [224/259] abattis-cantarell-vf-fonts-0: 100% | 16.8 MiB/s | 120.3 KiB | 00m00s [225/259] google-noto-fonts-common-0:20 100% | 3.4 MiB/s | 17.3 KiB | 00m00s [226/259] boost-regex-0:1.83.0-5.fc40.x 100% | 36.0 MiB/s | 110.6 KiB | 00m00s [227/259] nspr-0:4.35.0-23.fc40.x86_64 100% | 22.3 MiB/s | 136.9 KiB | 00m00s [228/259] libicu-0:74.2-1.fc40.x86_64 100% | 196.9 MiB/s | 10.4 MiB | 00m00s [229/259] nss-0:3.100.0-1.fc40.x86_64 100% | 40.4 MiB/s | 703.0 KiB | 00m00s [230/259] google-noto-sans-vf-fonts-0:2 100% | 14.1 MiB/s | 593.3 KiB | 00m00s [231/259] crypto-policies-scripts-0:202 100% | 22.7 MiB/s | 116.3 KiB | 00m00s [232/259] nss-softokn-0:3.100.0-1.fc40. 100% | 49.9 MiB/s | 408.8 KiB | 00m00s [233/259] nss-sysinit-0:3.100.0-1.fc40. 100% | 4.6 MiB/s | 18.7 KiB | 00m00s [234/259] nss-softokn-freebl-0:3.100.0- 100% | 53.8 MiB/s | 385.9 KiB | 00m00s [235/259] urw-base35-fonts-0:20200910-2 100% | 1.4 MiB/s | 10.2 KiB | 00m00s [236/259] urw-base35-fonts-common-0:202 100% | 2.9 MiB/s | 20.9 KiB | 00m00s [237/259] urw-base35-z003-fonts-0:20200 100% | 38.4 MiB/s | 275.6 KiB | 00m00s [238/259] urw-base35-nimbus-sans-fonts- 100% | 145.1 MiB/s | 1.3 MiB | 00m00s [239/259] urw-base35-standard-symbols-p 100% | 4.4 MiB/s | 58.4 KiB | 00m00s [240/259] urw-base35-p052-fonts-0:20200 100% | 59.4 MiB/s | 973.4 KiB | 00m00s [241/259] urw-base35-nimbus-roman-fonts 100% | 92.9 MiB/s | 856.1 KiB | 00m00s [242/259] urw-base35-gothic-fonts-0:202 100% | 78.5 MiB/s | 642.7 KiB | 00m00s [243/259] urw-base35-d050000l-fonts-0:2 100% | 14.8 MiB/s | 75.8 KiB | 00m00s [244/259] urw-base35-nimbus-mono-ps-fon 100% | 45.7 MiB/s | 794.8 KiB | 00m00s [245/259] urw-base35-bookman-fonts-0:20 100% | 103.4 MiB/s | 847.0 KiB | 00m00s [246/259] urw-base35-c059-fonts-0:20200 100% | 65.7 MiB/s | 874.2 KiB | 00m00s [247/259] libavif-0:1.0.4-3.fc40.x86_64 100% | 7.4 MiB/s | 91.0 KiB | 00m00s [248/259] svt-av1-libs-0:2.1.0-1.fc40.x 100% | 135.1 MiB/s | 2.0 MiB | 00m00s [249/259] librsvg2-0:2.57.1-6.fc40.x86_ 100% | 58.6 MiB/s | 1.5 MiB | 00m00s [250/259] nss-util-0:3.100.0-1.fc40.x86 100% | 17.2 MiB/s | 88.2 KiB | 00m00s [251/259] rsvg-pixbuf-loader-0:2.57.1-6 100% | 3.9 MiB/s | 15.9 KiB | 00m00s [252/259] libaom-0:3.9.0-1.fc40.x86_64 100% | 114.7 MiB/s | 1.8 MiB | 00m00s [253/259] libjxl-1:0.8.2-6.fc40.x86_64 100% | 59.6 MiB/s | 1.2 MiB | 00m00s [254/259] libvmaf-0:2.3.0-7.fc40.x86_64 100% | 11.7 MiB/s | 180.1 KiB | 00m00s [255/259] libdav1d-0:1.4.0-1.fc40.x86_6 100% | 12.9 MiB/s | 619.9 KiB | 00m00s [256/259] highway-0:1.1.0-1.fc40.x86_64 100% | 26.7 MiB/s | 492.2 KiB | 00m00s [257/259] rav1e-libs-0:0.7.1-2.fc40.x86 100% | 78.9 MiB/s | 1.0 MiB | 00m00s [258/259] python3-greenlet-0:3.0.3-3.fc 100% | 25.1 MiB/s | 256.5 KiB | 00m00s [259/259] python3-sqlalchemy-0:2.0.30-1 100% | 162.3 MiB/s | 3.6 MiB | 00m00s -------------------------------------------------------------------------------- [259/259] Total 100% | 93.6 MiB/s | 143.8 MiB | 00m02s Running transaction [ 1/261] Verify package files 100% | 476.0 B/s | 259.0 B | 00m01s [ 2/261] Prepare transaction 100% | 2.4 KiB/s | 259.0 B | 00m00s [ 3/261] Installing libpng-2:1.6.40-3. 100% | 237.4 MiB/s | 243.1 KiB | 00m00s [ 4/261] Installing nspr-0:4.35.0-23.f 100% | 306.9 MiB/s | 314.2 KiB | 00m00s [ 5/261] Installing fonts-filesystem-1 100% | 0.0 B/s | 788.0 B | 00m00s [ 6/261] Installing urw-base35-fonts-c 100% | 0.0 B/s | 38.4 KiB | 00m00s [ 7/261] Installing libgpg-error-0:1.4 100% | 286.8 MiB/s | 881.1 KiB | 00m00s [ 8/261] Installing libjpeg-turbo-0:3. 100% | 380.2 MiB/s | 778.6 KiB | 00m00s [ 9/261] Installing nss-util-0:3.100.0 100% | 221.7 MiB/s | 227.0 KiB | 00m00s [ 10/261] Installing libwebp-0:1.3.2-5. 100% | 259.7 MiB/s | 797.7 KiB | 00m00s [ 11/261] Installing expat-0:2.6.2-1.fc 100% | 276.2 MiB/s | 282.9 KiB | 00m00s [ 12/261] Installing dbus-libs-1:1.14.1 100% | 361.4 MiB/s | 370.1 KiB | 00m00s [ 13/261] Installing avahi-libs-0:0.8-2 100% | 164.9 MiB/s | 168.9 KiB | 00m00s [ 14/261] Installing libassuan-0:2.5.7- 100% | 161.7 MiB/s | 165.6 KiB | 00m00s [ 15/261] Installing lcms2-0:2.16-3.fc4 100% | 82.5 MiB/s | 422.5 KiB | 00m00s [ 16/261] Installing tzdata-0:2024a-5.f 100% | 70.4 MiB/s | 1.9 MiB | 00m00s [ 17/261] Installing python-rpm-macros- 100% | 0.0 B/s | 22.8 KiB | 00m00s [ 18/261] Installing libyaml-0:0.2.5-14 100% | 128.7 MiB/s | 131.8 KiB | 00m00s [ 19/261] Installing zchunk-libs-0:1.4. 100% | 19.2 MiB/s | 98.5 KiB | 00m00s >>> Running pre-install scriptlet: xml-common-0:0.6.3-63.fc40.noarch >>> Stop pre-install scriptlet: xml-common-0:0.6.3-63.fc40.noarch [ 20/261] Installing xml-common-0:0.6.3 100% | 79.2 MiB/s | 81.1 KiB | 00m00s [ 21/261] Installing libsolv-0:0.7.29-1 100% | 301.4 MiB/s | 925.9 KiB | 00m00s [ 22/261] Installing python3-rpm-macros 100% | 0.0 B/s | 6.7 KiB | 00m00s [ 23/261] Installing libicu-0:74.2-1.fc 100% | 401.6 MiB/s | 34.9 MiB | 00m00s [ 24/261] Installing libICE-0:1.1.1-3.f 100% | 178.3 MiB/s | 182.6 KiB | 00m00s [ 25/261] Installing openjpeg2-0:2.5.2- 100% | 216.6 MiB/s | 443.6 KiB | 00m00s [ 26/261] Installing adobe-mappings-cma 100% | 424.0 MiB/s | 14.4 MiB | 00m00s [ 27/261] Installing libwayland-client- 100% | 57.9 MiB/s | 59.3 KiB | 00m00s [ 28/261] Installing fribidi-0:1.0.13-4 100% | 359.1 MiB/s | 367.8 KiB | 00m00s [ 29/261] Installing json-c-0:0.17-3.fc 100% | 5.1 MiB/s | 83.6 KiB | 00m00s >>> Running pre-install scriptlet: tpm2-tss-0:4.1.3-1.fc40.x86_64 >>> Stop pre-install scriptlet: tpm2-tss-0:4.1.3-1.fc40.x86_64 [ 30/261] Installing tpm2-tss-0:4.1.3-1 100% | 258.9 MiB/s | 1.6 MiB | 00m00s [ 31/261] Installing libstemmer-0:2.2.0 100% | 293.6 MiB/s | 601.3 KiB | 00m00s [ 32/261] Installing libseccomp-0:2.5.3 100% | 169.0 MiB/s | 173.1 KiB | 00m00s [ 33/261] Installing ctags-0:6.0.0-5.fc 100% | 331.9 MiB/s | 2.0 MiB | 00m00s [ 34/261] Installing ima-evm-utils-0:1. 100% | 143.7 MiB/s | 147.1 KiB | 00m00s [ 35/261] Installing libwayland-cursor- 100% | 0.0 B/s | 38.1 KiB | 00m00s [ 36/261] Installing adobe-mappings-cma 100% | 285.7 MiB/s | 585.2 KiB | 00m00s [ 37/261] Installing libSM-0:1.2.4-3.fc 100% | 96.3 MiB/s | 98.6 KiB | 00m00s [ 38/261] Installing boost-regex-0:1.83 100% | 132.8 MiB/s | 272.0 KiB | 00m00s [ 39/261] Installing source-highlight-0 100% | 282.7 MiB/s | 3.1 MiB | 00m00s [ 40/261] Installing pyproject-rpm-macr 100% | 98.4 MiB/s | 100.8 KiB | 00m00s [ 41/261] Installing libcomps-0:0.1.20- 100% | 201.8 MiB/s | 206.7 KiB | 00m00s [ 42/261] Installing nss-softokn-freebl 100% | 292.5 MiB/s | 898.5 KiB | 00m00s [ 43/261] Installing nss-softokn-0:3.10 100% | 372.0 MiB/s | 1.9 MiB | 00m00s [ 44/261] Installing libgcrypt-0:1.10.3 100% | 324.0 MiB/s | 1.3 MiB | 00m00s [ 45/261] Installing libksba-0:1.6.6-1. 100% | 386.1 MiB/s | 395.4 KiB | 00m00s [ 46/261] Installing urw-base35-z003-fo 100% | 47.8 MiB/s | 391.8 KiB | 00m00s >>> Running post-install scriptlet: urw-base35-z003-fonts-0:20200910-20.fc40.noa >>> Stop post-install scriptlet: urw-base35-z003-fonts-0:20200910-20.fc40.noarch [ 47/261] Installing urw-base35-standar 100% | 12.9 MiB/s | 66.0 KiB | 00m00s >>> Running post-install scriptlet: urw-base35-standard-symbols-ps-fonts-0:20200 >>> Stop post-install scriptlet: urw-base35-standard-symbols-ps-fonts-0:20200910 [ 48/261] Installing urw-base35-p052-fo 100% | 185.9 MiB/s | 1.5 MiB | 00m00s >>> Running post-install scriptlet: urw-base35-p052-fonts-0:20200910-20.fc40.noa >>> Stop post-install scriptlet: urw-base35-p052-fonts-0:20200910-20.fc40.noarch [ 49/261] Installing urw-base35-nimbus- 100% | 239.4 MiB/s | 2.4 MiB | 00m00s >>> Running post-install scriptlet: urw-base35-nimbus-sans-fonts-0:20200910-20.f >>> Stop post-install scriptlet: urw-base35-nimbus-sans-fonts-0:20200910-20.fc40 [ 50/261] Installing urw-base35-nimbus- 100% | 195.1 MiB/s | 1.4 MiB | 00m00s >>> Running post-install scriptlet: urw-base35-nimbus-roman-fonts-0:20200910-20. >>> Stop post-install scriptlet: urw-base35-nimbus-roman-fonts-0:20200910-20.fc4 [ 51/261] Installing urw-base35-nimbus- 100% | 175.3 MiB/s | 1.1 MiB | 00m00s >>> Running post-install scriptlet: urw-base35-nimbus-mono-ps-fonts-0:20200910-2 >>> Stop post-install scriptlet: urw-base35-nimbus-mono-ps-fonts-0:20200910-20.f [ 52/261] Installing urw-base35-gothic- 100% | 166.1 MiB/s | 1.2 MiB | 00m00s >>> Running post-install scriptlet: urw-base35-gothic-fonts-0:20200910-20.fc40.n >>> Stop post-install scriptlet: urw-base35-gothic-fonts-0:20200910-20.fc40.noar [ 53/261] Installing urw-base35-d050000 100% | 16.7 MiB/s | 85.4 KiB | 00m00s >>> Running post-install scriptlet: urw-base35-d050000l-fonts-0:20200910-20.fc40 >>> Stop post-install scriptlet: urw-base35-d050000l-fonts-0:20200910-20.fc40.no [ 54/261] Installing urw-base35-c059-fo 100% | 174.4 MiB/s | 1.4 MiB | 00m00s >>> Running post-install scriptlet: urw-base35-c059-fonts-0:20200910-20.fc40.noa >>> Stop post-install scriptlet: urw-base35-c059-fonts-0:20200910-20.fc40.noarch [ 55/261] Installing urw-base35-bookman 100% | 195.0 MiB/s | 1.4 MiB | 00m00s >>> Running post-install scriptlet: urw-base35-bookman-fonts-0:20200910-20.fc40. >>> Stop post-install scriptlet: urw-base35-bookman-fonts-0:20200910-20.fc40.noa [ 56/261] Installing urw-base35-fonts-0 100% | 0.0 B/s | 5.6 KiB | 00m00s [ 57/261] Installing abattis-cantarell- 100% | 189.9 MiB/s | 194.4 KiB | 00m00s [ 58/261] Installing rav1e-libs-0:0.7.1 100% | 333.8 MiB/s | 3.0 MiB | 00m00s [ 59/261] Installing highway-0:1.1.0-1. 100% | 452.1 MiB/s | 3.2 MiB | 00m00s [ 60/261] Installing libvmaf-0:2.3.0-7. 100% | 381.3 MiB/s | 780.9 KiB | 00m00s [ 61/261] Installing libdav1d-0:1.4.0-1 100% | 332.4 MiB/s | 1.7 MiB | 00m00s [ 62/261] Installing svt-av1-libs-0:2.1 100% | 414.8 MiB/s | 7.1 MiB | 00m00s [ 63/261] Installing google-noto-fonts- 100% | 0.0 B/s | 18.3 KiB | 00m00s [ 64/261] Installing google-noto-sans-v 100% | 312.2 MiB/s | 1.2 MiB | 00m00s [ 65/261] Installing google-droid-sans- 100% | 391.1 MiB/s | 6.3 MiB | 00m00s [ 66/261] Installing default-fonts-core 100% | 3.6 MiB/s | 18.2 KiB | 00m00s [ 67/261] Installing adwaita-icon-theme 100% | 83.9 MiB/s | 2.4 MiB | 00m00s [ 68/261] Installing adwaita-cursor-the 100% | 627.3 MiB/s | 10.0 MiB | 00m00s [ 69/261] Installing adwaita-icon-theme 100% | 101.8 MiB/s | 1.3 MiB | 00m00s [ 70/261] Installing libusb1-0:1.0.27-2 100% | 160.1 MiB/s | 163.9 KiB | 00m00s [ 71/261] Installing poppler-data-0:0.4 100% | 399.7 MiB/s | 12.4 MiB | 00m00s [ 72/261] Installing libpaper-1:2.1.1-3 100% | 49.3 MiB/s | 50.5 KiB | 00m00s [ 73/261] Installing libijs-0:0.35-22.f 100% | 0.0 B/s | 62.6 KiB | 00m00s [ 74/261] Installing jbig2dec-libs-0:0. 100% | 166.6 MiB/s | 170.6 KiB | 00m00s [ 75/261] Installing adobe-mappings-pdf 100% | 399.7 MiB/s | 4.4 MiB | 00m00s [ 76/261] Installing netpbm-0:11.02.00- 100% | 280.8 MiB/s | 575.0 KiB | 00m00s [ 77/261] Installing libimagequant-0:4. 100% | 337.8 MiB/s | 691.9 KiB | 00m00s [ 78/261] Installing pixman-0:0.43.4-1. 100% | 347.3 MiB/s | 711.2 KiB | 00m00s [ 79/261] Installing libXau-0:1.0.11-6. 100% | 66.8 MiB/s | 68.4 KiB | 00m00s [ 80/261] Installing libxcb-0:1.17.0-1. 100% | 279.0 MiB/s | 1.1 MiB | 00m00s [ 81/261] Installing dbus-common-1:1.14 100% | 713.2 KiB/s | 13.6 KiB | 00m00s >>> Running post-install scriptlet: dbus-common-1:1.14.10-3.fc40.noarch >>> Stop post-install scriptlet: dbus-common-1:1.14.10-3.fc40.noarch >>> Running pre-install scriptlet: dbus-broker-0:36-2.fc40.x86_64 >>> Stop pre-install scriptlet: dbus-broker-0:36-2.fc40.x86_64 [ 82/261] Installing dbus-broker-0:36-2 100% | 62.1 MiB/s | 381.3 KiB | 00m00s >>> Running post-install scriptlet: dbus-broker-0:36-2.fc40.x86_64 >>> Stop post-install scriptlet: dbus-broker-0:36-2.fc40.x86_64 [ 83/261] Installing dbus-1:1.14.10-3.f 100% | 0.0 B/s | 124.0 B | 00m00s [ 84/261] Installing graphite2-0:1.3.14 100% | 189.6 MiB/s | 194.2 KiB | 00m00s [ 85/261] Installing nettle-0:3.9.1-6.f 100% | 258.2 MiB/s | 793.3 KiB | 00m00s [ 86/261] Installing gnutls-0:3.8.5-1.f 100% | 320.0 MiB/s | 3.2 MiB | 00m00s [ 87/261] Installing glib2-0:2.80.2-1.f 100% | 394.2 MiB/s | 14.6 MiB | 00m00s [ 88/261] Installing libmodulemd-0:2.15 100% | 234.3 MiB/s | 719.7 KiB | 00m00s [ 89/261] Installing json-glib-0:1.8.0- 100% | 111.9 MiB/s | 572.8 KiB | 00m00s [ 90/261] Installing shared-mime-info-0 100% | 196.6 MiB/s | 2.6 MiB | 00m00s >>> Running post-install scriptlet: shared-mime-info-0:2.3-5.fc40.x86_64 >>> Stop post-install scriptlet: shared-mime-info-0:2.3-5.fc40.x86_64 [ 91/261] Installing gdk-pixbuf2-0:2.42 100% | 249.0 MiB/s | 2.5 MiB | 00m00s [ 92/261] Installing cups-libs-1:2.4.8- 100% | 302.9 MiB/s | 620.4 KiB | 00m00s [ 93/261] Installing libappstream-glib- 100% | 282.3 MiB/s | 1.4 MiB | 00m00s [ 94/261] Installing gtk-update-icon-ca 100% | 65.9 MiB/s | 67.5 KiB | 00m00s [ 95/261] Installing libjxl-1:0.8.2-6.f 100% | 407.1 MiB/s | 4.1 MiB | 00m00s [ 96/261] Installing libaom-0:3.9.0-1.f 100% | 417.5 MiB/s | 5.0 MiB | 00m00s [ 97/261] Installing libavif-0:1.0.4-3. 100% | 180.7 MiB/s | 185.1 KiB | 00m00s [ 98/261] Installing libgusb-0:0.4.9-1. 100% | 160.0 MiB/s | 163.8 KiB | 00m00s [ 99/261] Installing colord-libs-0:1.4. 100% | 274.1 MiB/s | 842.2 KiB | 00m00s [100/261] Installing libcloudproviders- 100% | 127.1 MiB/s | 130.1 KiB | 00m00s [101/261] Installing gts-0:0.7.6-48.201 100% | 214.0 MiB/s | 657.4 KiB | 00m00s [102/261] Installing gobject-introspect 100% | 159.3 MiB/s | 326.3 KiB | 00m00s [103/261] Installing librepo-0:1.17.1-1 100% | 239.7 MiB/s | 245.5 KiB | 00m00s [104/261] Installing libdnf-0:0.73.1-1. 100% | 264.8 MiB/s | 2.1 MiB | 00m00s [105/261] Installing avahi-glib-0:0.8-2 100% | 0.0 B/s | 20.4 KiB | 00m00s [106/261] Installing libsoup3-0:3.4.4-3 100% | 188.6 MiB/s | 1.1 MiB | 00m00s [107/261] Installing libtracker-sparql- 100% | 260.8 MiB/s | 1.0 MiB | 00m00s [108/261] Installing libX11-common-0:1. 100% | 148.2 MiB/s | 1.2 MiB | 00m00s [109/261] Installing libX11-0:1.8.9-1.f 100% | 318.4 MiB/s | 1.3 MiB | 00m00s [110/261] Installing libXext-0:1.3.6-1. 100% | 89.2 MiB/s | 91.3 KiB | 00m00s [111/261] Installing libXrender-0:0.9.1 100% | 50.2 MiB/s | 51.4 KiB | 00m00s [112/261] Installing cairo-0:1.18.0-3.f 100% | 346.4 MiB/s | 1.7 MiB | 00m00s [113/261] Installing harfbuzz-0:8.4.0-1 100% | 376.3 MiB/s | 2.6 MiB | 00m00s [114/261] Installing freetype-0:2.13.2- 100% | 274.8 MiB/s | 844.3 KiB | 00m00s [115/261] Installing fontconfig-0:2.15. 100% | 695.4 KiB/s | 787.2 KiB | 00m01s >>> Running post-install scriptlet: fontconfig-0:2.15.0-6.fc40.x86_64 >>> Stop post-install scriptlet: fontconfig-0:2.15.0-6.fc40.x86_64 [116/261] Installing cairo-gobject-0:1. 100% | 35.2 MiB/s | 36.1 KiB | 00m00s [117/261] Installing libXi-0:1.8.1-5.fc 100% | 79.9 MiB/s | 81.8 KiB | 00m00s [118/261] Installing libXfixes-0:6.0.1- 100% | 30.9 MiB/s | 31.6 KiB | 00m00s [119/261] Installing libXcursor-0:1.2.1 100% | 50.0 MiB/s | 51.2 KiB | 00m00s [120/261] Installing libXdamage-0:1.1.6 100% | 44.2 MiB/s | 45.3 KiB | 00m00s [121/261] Installing libXtst-0:1.2.4-6. 100% | 33.8 MiB/s | 34.7 KiB | 00m00s [122/261] Installing libXft-0:2.3.8-6.f 100% | 162.1 MiB/s | 166.0 KiB | 00m00s [123/261] Installing libXrandr-0:1.5.4- 100% | 51.9 MiB/s | 53.1 KiB | 00m00s [124/261] Installing libXinerama-0:1.1. 100% | 0.0 B/s | 20.2 KiB | 00m00s [125/261] Installing libXcomposite-0:0. 100% | 45.0 MiB/s | 46.1 KiB | 00m00s [126/261] Installing xprop-0:1.2.7-1.fc 100% | 54.9 MiB/s | 56.2 KiB | 00m00s [127/261] Installing at-spi2-core-0:2.5 100% | 188.0 MiB/s | 1.5 MiB | 00m00s [128/261] Installing atk-0:2.52.0-1.fc4 100% | 248.1 MiB/s | 254.1 KiB | 00m00s [129/261] Installing at-spi2-atk-0:2.52 100% | 283.1 MiB/s | 289.9 KiB | 00m00s [130/261] Installing libXpm-0:3.5.17-3. 100% | 146.3 MiB/s | 149.8 KiB | 00m00s [131/261] Installing libXt-0:1.3.0-3.fc 100% | 208.6 MiB/s | 427.1 KiB | 00m00s [132/261] Installing libdatrie-0:0.2.13 100% | 0.0 B/s | 59.0 KiB | 00m00s [133/261] Installing libthai-0:0.1.29-8 100% | 255.6 MiB/s | 785.3 KiB | 00m00s [134/261] Installing pango-0:1.52.2-1.f 100% | 244.5 MiB/s | 1.0 MiB | 00m00s [135/261] Installing librsvg2-0:2.57.1- 100% | 342.4 MiB/s | 4.1 MiB | 00m00s [136/261] Installing rsvg-pixbuf-loader 100% | 16.2 MiB/s | 16.5 KiB | 00m00s [137/261] Installing lasi-0:1.1.3-13.fc 100% | 129.2 MiB/s | 132.3 KiB | 00m00s [138/261] Installing liblerc-0:4.0.0-6. 100% | 295.4 MiB/s | 605.0 KiB | 00m00s [139/261] Installing jbigkit-libs-0:2.1 100% | 116.8 MiB/s | 119.6 KiB | 00m00s [140/261] Installing libtiff-0:4.6.0-2. 100% | 373.2 MiB/s | 1.1 MiB | 00m00s [141/261] Installing gdk-pixbuf2-module 100% | 125.8 MiB/s | 257.6 KiB | 00m00s [142/261] Installing gd-0:2.3.3-16.fc40 100% | 195.7 MiB/s | 400.8 KiB | 00m00s [143/261] Installing libgs-0:10.02.1-8. 100% | 516.4 MiB/s | 23.2 MiB | 00m00s [144/261] Installing xkeyboard-config-0 100% | 349.0 MiB/s | 6.6 MiB | 00m00s [145/261] Installing libxkbcommon-0:1.6 100% | 161.1 MiB/s | 330.0 KiB | 00m00s [146/261] Installing libwayland-egl-0:1 100% | 0.0 B/s | 17.6 KiB | 00m00s [147/261] Installing libepoxy-0:1.5.10- 100% | 362.0 MiB/s | 1.1 MiB | 00m00s [148/261] Installing hicolor-icon-theme 100% | 19.5 MiB/s | 179.5 KiB | 00m00s [149/261] Installing gtk3-0:3.24.42-2.f 100% | 400.9 MiB/s | 22.4 MiB | 00m00s [150/261] Installing npth-0:1.7-1.fc40. 100% | 49.5 MiB/s | 50.7 KiB | 00m00s [151/261] Installing gnupg2-0:2.4.4-1.f 100% | 339.6 MiB/s | 9.5 MiB | 00m00s [152/261] Installing gpgme-0:1.23.2-3.f 100% | 282.1 MiB/s | 577.7 KiB | 00m00s [153/261] Installing gpgmepp-0:1.23.2-3 100% | 207.7 MiB/s | 425.3 KiB | 00m00s [154/261] Installing libreport-filesyst 100% | 0.0 B/s | 1.5 KiB | 00m00s [155/261] Installing dnf-data-0:4.19.2- 100% | 40.4 MiB/s | 41.4 KiB | 00m00s [156/261] Installing libfsverity-0:1.4- 100% | 32.8 MiB/s | 33.6 KiB | 00m00s [157/261] Installing rpm-sign-libs-0:4. 100% | 39.3 MiB/s | 40.2 KiB | 00m00s [158/261] Installing sgml-common-0:0.6. 100% | 85.4 MiB/s | 174.9 KiB | 00m00s [159/261] Installing docbook-dtds-0:1.0 100% | 37.3 MiB/s | 8.3 MiB | 00m00s >>> Running post-install scriptlet: docbook-dtds-0:1.0-85.fc40.noarch >>> Stop post-install scriptlet: docbook-dtds-0:1.0-85.fc40.noarch [160/261] Installing docbook-style-xsl- 100% | 264.4 MiB/s | 15.9 MiB | 00m00s >>> Running post-install scriptlet: docbook-style-xsl-0:1.79.2-22.fc40.noarch >>> Stop post-install scriptlet: docbook-style-xsl-0:1.79.2-22.fc40.noarch [161/261] Installing python-pip-wheel-0 100% | 506.6 MiB/s | 1.5 MiB | 00m00s [162/261] Installing mpdecimal-0:2.5.1- 100% | 197.3 MiB/s | 202.0 KiB | 00m00s [163/261] Installing libb2-0:0.98.1-11. 100% | 42.3 MiB/s | 43.3 KiB | 00m00s [164/261] Installing python3-0:3.12.3-2 100% | 5.4 MiB/s | 33.3 KiB | 00m00s [165/261] Installing python3-libs-0:3.1 100% | 344.5 MiB/s | 41.3 MiB | 00m00s [166/261] Installing python3-six-0:1.16 100% | 117.2 MiB/s | 120.1 KiB | 00m00s [167/261] Installing python3-packaging- 100% | 105.4 MiB/s | 431.9 KiB | 00m00s [168/261] Installing python3-setuptools 100% | 280.8 MiB/s | 7.3 MiB | 00m00s [169/261] Installing python3-rpm-0:4.19 100% | 170.1 MiB/s | 174.2 KiB | 00m00s [170/261] Installing python3-markupsafe 100% | 59.0 MiB/s | 60.4 KiB | 00m00s [171/261] Installing python3-jinja2-0:3 100% | 361.8 MiB/s | 2.9 MiB | 00m00s [172/261] Installing python3-dateutil-1 100% | 290.2 MiB/s | 891.5 KiB | 00m00s [173/261] Installing python3-libdnf-0:0 100% | 381.1 MiB/s | 3.8 MiB | 00m00s [174/261] Installing python3-hawkey-0:0 100% | 150.8 MiB/s | 308.8 KiB | 00m00s [175/261] Installing python3-pyyaml-0:6 100% | 195.4 MiB/s | 800.2 KiB | 00m00s [176/261] Installing python3-docutils-0 100% | 271.5 MiB/s | 4.9 MiB | 00m00s [177/261] Installing python3-gobject-ba 100% | 285.6 MiB/s | 1.4 MiB | 00m00s [178/261] Installing python3-typing-ext 100% | 192.1 MiB/s | 393.4 KiB | 00m00s [179/261] Installing python3-idna-0:3.7 100% | 195.6 MiB/s | 600.9 KiB | 00m00s [180/261] Installing python3-urllib3-0: 100% | 249.5 MiB/s | 1.0 MiB | 00m00s [181/261] Installing python3-libmodulem 100% | 15.9 MiB/s | 16.2 KiB | 00m00s [182/261] Installing python3-mako-0:1.2 100% | 142.5 MiB/s | 729.8 KiB | 00m00s [183/261] Installing python3-werkzeug-0 100% | 265.0 MiB/s | 1.9 MiB | 00m00s [184/261] Installing python3-munch-0:2. 100% | 63.3 MiB/s | 64.8 KiB | 00m00s [185/261] Installing python3-rpm-genera 100% | 0.0 B/s | 82.9 KiB | 00m00s [186/261] Installing python3-libcomps-0 100% | 71.3 MiB/s | 146.1 KiB | 00m00s [187/261] Installing python3-dnf-0:4.19 100% | 292.2 MiB/s | 2.6 MiB | 00m00s [188/261] Installing python3-distro-0:1 100% | 201.5 MiB/s | 206.3 KiB | 00m00s [189/261] Installing python3-filelock-0 100% | 62.3 MiB/s | 63.8 KiB | 00m00s [190/261] Installing python3-lockfile-1 100% | 81.5 MiB/s | 83.5 KiB | 00m00s [191/261] Installing python3-iniconfig- 100% | 22.9 MiB/s | 23.4 KiB | 00m00s [192/261] Installing python3-pluggy-0:1 100% | 183.9 MiB/s | 188.3 KiB | 00m00s [193/261] Installing python3-charset-no 100% | 157.5 MiB/s | 322.7 KiB | 00m00s [194/261] Installing python3-requests-0 100% | 154.5 MiB/s | 474.5 KiB | 00m00s [195/261] Installing python3-requests-t 100% | 105.7 MiB/s | 324.7 KiB | 00m00s [196/261] Installing python3-imagesize- 100% | 12.3 MiB/s | 37.8 KiB | 00m00s [197/261] Installing python3-pygments-0 100% | 301.1 MiB/s | 10.5 MiB | 00m00s [198/261] Installing python3-snowballst 100% | 340.6 MiB/s | 1.7 MiB | 00m00s [199/261] Installing python3-sphinx-the 100% | 45.2 MiB/s | 46.3 KiB | 00m00s [200/261] Installing python3-cairo-0:1. 100% | 242.5 MiB/s | 496.6 KiB | 00m00s [201/261] Installing python3-defusedxml 100% | 200.7 MiB/s | 205.6 KiB | 00m00s [202/261] Installing python3-decorator- 100% | 78.2 MiB/s | 80.1 KiB | 00m00s [203/261] Installing python3-gssapi-0:1 100% | 306.0 MiB/s | 2.8 MiB | 00m00s [204/261] Installing python3-requests-g 100% | 64.5 MiB/s | 66.1 KiB | 00m00s [205/261] Installing python3-koji-0:1.3 100% | 295.4 MiB/s | 2.1 MiB | 00m00s [206/261] Installing python3-babel-0:2. 100% | 344.9 MiB/s | 28.6 MiB | 00m00s [207/261] Installing python3-redis-0:5. 100% | 260.9 MiB/s | 2.3 MiB | 00m00s [208/261] Installing python3-dbus-0:1.3 100% | 174.6 MiB/s | 536.5 KiB | 00m00s [209/261] Installing python3-systemd-0: 100% | 177.6 MiB/s | 363.7 KiB | 00m00s [210/261] Installing python3-blinker-0: 100% | 110.4 MiB/s | 113.0 KiB | 00m00s [211/261] Installing python3-click-0:8. 100% | 355.9 MiB/s | 1.1 MiB | 00m00s [212/261] Installing python3-itsdangero 100% | 100.0 MiB/s | 102.4 KiB | 00m00s [213/261] Installing python3-flask-1:3. 100% | 218.0 MiB/s | 892.7 KiB | 00m00s [214/261] Installing crypto-policies-sc 100% | 160.5 MiB/s | 328.7 KiB | 00m00s [215/261] Installing nss-sysinit-0:3.10 100% | 18.9 MiB/s | 19.3 KiB | 00m00s [216/261] Installing nss-0:3.100.0-1.fc 100% | 189.8 MiB/s | 1.9 MiB | 00m00s >>> Running post-install scriptlet: nss-0:3.100.0-1.fc40.x86_64 >>> Stop post-install scriptlet: nss-0:3.100.0-1.fc40.x86_64 [217/261] Installing poppler-0:24.02.0- 100% | 346.1 MiB/s | 3.5 MiB | 00m00s [218/261] Installing poppler-glib-0:24. 100% | 187.5 MiB/s | 576.1 KiB | 00m00s [219/261] Installing graphviz-0:9.0.0-1 100% | 415.1 MiB/s | 21.2 MiB | 00m00s [220/261] Installing python3-greenlet-0 100% | 132.5 MiB/s | 950.1 KiB | 00m00s [221/261] Installing python3-sqlalchemy 100% | 418.7 MiB/s | 22.6 MiB | 00m00s [222/261] Installing python3-alembic-0: 100% | 267.9 MiB/s | 2.7 MiB | 00m00s [223/261] Installing gc-0:8.2.2-6.fc40. 100% | 85.0 MiB/s | 261.2 KiB | 00m00s [224/261] Installing guile30-0:3.0.7-12 100% | 473.3 MiB/s | 51.6 MiB | 00m00s [225/261] Installing drpm-0:0.5.2-5.fc4 100% | 129.7 MiB/s | 132.8 KiB | 00m00s [226/261] Installing createrepo_c-libs- 100% | 268.5 MiB/s | 275.0 KiB | 00m00s [227/261] Installing createrepo_c-0:1.0 100% | 97.2 MiB/s | 199.1 KiB | 00m00s [228/261] Installing python3-createrepo 100% | 154.3 MiB/s | 158.0 KiB | 00m00s [229/261] Installing kmod-libs-0:31-5.f 100% | 140.9 MiB/s | 144.3 KiB | 00m00s [230/261] Installing systemd-pam-0:255. 100% | 206.4 MiB/s | 1.0 MiB | 00m00s [231/261] Installing systemd-0:255.7-1. 100% | 114.1 MiB/s | 14.7 MiB | 00m00s >>> Running post-install scriptlet: systemd-0:255.7-1.fc40.x86_64 >>> Stop post-install scriptlet: systemd-0:255.7-1.fc40.x86_64 >>> Running pre-install scriptlet: logrotate-0:3.21.0-6.fc40.x86_64 >>> Stop pre-install scriptlet: logrotate-0:3.21.0-6.fc40.x86_64 [232/261] Installing logrotate-0:3.21.0 100% | 13.7 MiB/s | 154.6 KiB | 00m00s >>> Running post-install scriptlet: logrotate-0:3.21.0-6.fc40.x86_64 >>> Stop post-install scriptlet: logrotate-0:3.21.0-6.fc40.x86_64 [233/261] Installing python3-dnf-plugin 100% | 204.3 MiB/s | 1.2 MiB | 00m00s [234/261] Installing dnf-plugins-core-0 100% | 25.0 MiB/s | 25.6 KiB | 00m00s [235/261] Installing libxslt-0:1.1.39-3 100% | 157.8 MiB/s | 484.7 KiB | 00m00s [236/261] Installing asciidoc-0:10.2.0- 100% | 243.0 MiB/s | 1.7 MiB | 00m00s [237/261] Installing prunerepo-0:1.25-5 100% | 4.1 MiB/s | 59.5 KiB | 00m00s >>> Running pre-install scriptlet: redis-0:7.2.5-1.fc40.x86_64 >>> Stop pre-install scriptlet: redis-0:7.2.5-1.fc40.x86_64 [238/261] Installing redis-0:7.2.5-1.fc 100% | 180.3 MiB/s | 5.2 MiB | 00m00s >>> Running post-install scriptlet: redis-0:7.2.5-1.fc40.x86_64 >>> Stop post-install scriptlet: redis-0:7.2.5-1.fc40.x86_64 [239/261] Installing modulemd-tools-0:0 100% | 78.6 MiB/s | 241.5 KiB | 00m00s [240/261] Installing make-1:4.4.1-6.fc4 100% | 300.0 MiB/s | 1.8 MiB | 00m00s [241/261] Installing python3-resalloc-0 100% | 19.7 MiB/s | 60.6 KiB | 00m00s [242/261] Installing python3-sphinx-1:7 100% | 249.4 MiB/s | 11.0 MiB | 00m00s [243/261] Installing python3-retask-0:1 100% | 33.6 MiB/s | 34.4 KiB | 00m00s [244/261] Installing python3-copr-0:1.1 100% | 65.1 MiB/s | 266.5 KiB | 00m00s [245/261] Installing python3-gobject-0: 100% | 12.0 MiB/s | 24.6 KiB | 00m00s [246/261] Installing python3-pytest-0:7 100% | 422.2 MiB/s | 15.2 MiB | 00m00s [247/261] Installing python3-daemon-0:2 100% | 158.5 MiB/s | 162.3 KiB | 00m00s [248/261] Installing dnf-0:4.19.2-1.fc4 100% | 106.3 MiB/s | 2.6 MiB | 00m00s >>> Running post-install scriptlet: dnf-0:4.19.2-1.fc40.noarch >>> Stop post-install scriptlet: dnf-0:4.19.2-1.fc40.noarch [249/261] Installing python3-devel-0:3. 100% | 182.3 MiB/s | 1.3 MiB | 00m00s [250/261] Installing python3-httpretty- 100% | 194.1 MiB/s | 198.8 KiB | 00m00s [251/261] Installing python3-cachetools 100% | 142.5 MiB/s | 145.9 KiB | 00m00s [252/261] Installing python3-humanize-0 100% | 39.5 MiB/s | 202.0 KiB | 00m00s [253/261] Installing python3-netaddr-0: 100% | 461.5 MiB/s | 11.1 MiB | 00m00s [254/261] Installing python3-pytz-0:202 100% | 225.7 MiB/s | 231.1 KiB | 00m00s [255/261] Installing python3-setproctit 100% | 36.7 MiB/s | 37.6 KiB | 00m00s [256/261] Installing python3-tabulate-0 100% | 339.0 MiB/s | 347.1 KiB | 00m00s [257/261] Installing python3-zstandard- 100% | 408.1 MiB/s | 2.0 MiB | 00m00s [258/261] Installing python3-copr-commo 100% | 175.1 MiB/s | 179.3 KiB | 00m00s [259/261] Installing libappstream-glib- 100% | 136.0 MiB/s | 278.6 KiB | 00m00s [260/261] Installing systemd-rpm-macros 100% | 0.0 B/s | 10.1 KiB | 00m00s [261/261] Installing rsync-0:3.3.0-1.fc 100% | 1.1 MiB/s | 773.1 KiB | 00m01s >>> Running post-transaction scriptlet: urw-base35-z003-fonts-0:20200910-20.fc40 >>> Stop post-transaction scriptlet: urw-base35-z003-fonts-0:20200910-20.fc40.no >>> Running post-transaction scriptlet: urw-base35-standard-symbols-ps-fonts-0:2 >>> Stop post-transaction scriptlet: urw-base35-standard-symbols-ps-fonts-0:2020 >>> Running post-transaction scriptlet: urw-base35-p052-fonts-0:20200910-20.fc40 >>> Stop post-transaction scriptlet: urw-base35-p052-fonts-0:20200910-20.fc40.no >>> Running post-transaction scriptlet: urw-base35-nimbus-sans-fonts-0:20200910- >>> Stop post-transaction scriptlet: urw-base35-nimbus-sans-fonts-0:20200910-20. >>> Running post-transaction scriptlet: urw-base35-nimbus-roman-fonts-0:20200910 >>> Stop post-transaction scriptlet: urw-base35-nimbus-roman-fonts-0:20200910-20 >>> Running post-transaction scriptlet: urw-base35-nimbus-mono-ps-fonts-0:202009 >>> Stop post-transaction scriptlet: urw-base35-nimbus-mono-ps-fonts-0:20200910- >>> Running post-transaction scriptlet: urw-base35-gothic-fonts-0:20200910-20.fc >>> Stop post-transaction scriptlet: urw-base35-gothic-fonts-0:20200910-20.fc40. >>> Running post-transaction scriptlet: urw-base35-d050000l-fonts-0:20200910-20. >>> Stop post-transaction scriptlet: urw-base35-d050000l-fonts-0:20200910-20.fc4 >>> Running post-transaction scriptlet: urw-base35-c059-fonts-0:20200910-20.fc40 >>> Stop post-transaction scriptlet: urw-base35-c059-fonts-0:20200910-20.fc40.no >>> Running post-transaction scriptlet: urw-base35-bookman-fonts-0:20200910-20.f >>> Stop post-transaction scriptlet: urw-base35-bookman-fonts-0:20200910-20.fc40 >>> Running post-transaction scriptlet: fontconfig-0:2.15.0-6.fc40.x86_64 >>> Stop post-transaction scriptlet: fontconfig-0:2.15.0-6.fc40.x86_64 >>> Running post-transaction scriptlet: crypto-policies-scripts-0:20240510-1.git >>> Stop post-transaction scriptlet: crypto-policies-scripts-0:20240510-1.gitd28 >>> Running post-transaction scriptlet: nss-0:3.100.0-1.fc40.x86_64 >>> Stop post-transaction scriptlet: nss-0:3.100.0-1.fc40.x86_64 >>> Running trigger-install scriptlet: glibc-common-0:2.39-13.fc40.x86_64 >>> Stop trigger-install scriptlet: glibc-common-0:2.39-13.fc40.x86_64 >>> Running trigger-install scriptlet: info-0:7.1-2.fc40.x86_64 >>> Stop trigger-install scriptlet: info-0:7.1-2.fc40.x86_64 >>> Running trigger-install scriptlet: adwaita-icon-theme-legacy-0:46.2-1.fc40.n >>> Stop trigger-install scriptlet: adwaita-icon-theme-legacy-0:46.2-1.fc40.noar >>> Running trigger-install scriptlet: adwaita-icon-theme-0:46.2-2.fc40.noarch >>> Stop trigger-install scriptlet: adwaita-icon-theme-0:46.2-2.fc40.noarch >>> Running trigger-install scriptlet: glib2-0:2.80.2-1.fc40.x86_64 >>> Stop trigger-install scriptlet: glib2-0:2.80.2-1.fc40.x86_64 >>> Running trigger-install scriptlet: glib2-0:2.80.2-1.fc40.x86_64 >>> Stop trigger-install scriptlet: glib2-0:2.80.2-1.fc40.x86_64 >>> Running trigger-install scriptlet: shared-mime-info-0:2.3-5.fc40.x86_64 >>> Stop trigger-install scriptlet: shared-mime-info-0:2.3-5.fc40.x86_64 >>> Running trigger-install scriptlet: gdk-pixbuf2-0:2.42.10-8.fc40.x86_64 >>> Stop trigger-install scriptlet: gdk-pixbuf2-0:2.42.10-8.fc40.x86_64 >>> Running trigger-install scriptlet: fontconfig-0:2.15.0-6.fc40.x86_64 >>> Stop trigger-install scriptlet: fontconfig-0:2.15.0-6.fc40.x86_64 >>> Running trigger-install scriptlet: hicolor-icon-theme-0:0.17-18.fc40.noarch >>> Stop trigger-install scriptlet: hicolor-icon-theme-0:0.17-18.fc40.noarch >>> Running trigger-install scriptlet: graphviz-0:9.0.0-11.fc40.x86_64 >>> Stop trigger-install scriptlet: graphviz-0:9.0.0-11.fc40.x86_64 >>> Running trigger-install scriptlet: systemd-0:255.7-1.fc40.x86_64 >>> Stop trigger-install scriptlet: systemd-0:255.7-1.fc40.x86_64 >>> Running trigger-install scriptlet: systemd-0:255.7-1.fc40.x86_64 >>> Stop trigger-install scriptlet: systemd-0:255.7-1.fc40.x86_64 >>> Running trigger-install scriptlet: systemd-0:255.7-1.fc40.x86_64 >>> Stop trigger-install scriptlet: systemd-0:255.7-1.fc40.x86_64 >>> Running trigger-install scriptlet: systemd-0:255.7-1.fc40.x86_64 >>> Stop trigger-install scriptlet: systemd-0:255.7-1.fc40.x86_64 >>> Running trigger-install scriptlet: systemd-0:255.7-1.fc40.x86_64 >>> Stop trigger-install scriptlet: systemd-0:255.7-1.fc40.x86_64 >>> Running trigger-install scriptlet: systemd-0:255.7-1.fc40.x86_64 >>> Stop trigger-install scriptlet: systemd-0:255.7-1.fc40.x86_64 Warning: skipped PGP checks for 2 package(s). Finish: build setup for copr-backend-1.177-1.git.11.f31c7c4.fc40.src.rpm Start: rpmbuild copr-backend-1.177-1.git.11.f31c7c4.fc40.src.rpm Building target platforms: x86_64 Building for target x86_64 setting SOURCE_DATE_EPOCH=1716249600 Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.BJvd4L + umask 022 + cd /builddir/build/BUILD + cd /builddir/build/BUILD + rm -rf copr-backend-git-11.8c774c3 + /usr/lib/rpm/rpmuncompress -x /builddir/build/SOURCES/copr-backend-git-11.8c774c3.tar.gz + STATUS=0 + '[' 0 -ne 0 ']' + cd copr-backend-git-11.8c774c3 + rm -rf /builddir/build/BUILD/copr-backend-git-11.8c774c3-SPECPARTS + /usr/bin/mkdir -p /builddir/build/BUILD/copr-backend-git-11.8c774c3-SPECPARTS + /usr/lib/rpm/rpmuncompress -x /builddir/build/SOURCES/test-data-copr-backend-5.tar.gz + STATUS=0 + '[' 0 -ne 0 ']' + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + RPM_EC=0 ++ jobs -p + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.ScKcRU + umask 022 + cd /builddir/build/BUILD + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer ' + export CFLAGS + CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer ' + export CXXFLAGS + FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules ' + export FFLAGS + FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Cforce-frame-pointers=yes -Clink-arg=-specs=/usr/lib/rpm/redhat/redhat-package-notes --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld-errors -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes ' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib64: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd copr-backend-git-11.8c774c3 + make -C docs -j4 html make: Entering directory '/builddir/build/BUILD/copr-backend-git-11.8c774c3/docs' sphinx-build-3 -b html -d build/doctrees source build/html Running Sphinx v7.2.6 making output directory... done building [mo]: targets for 0 po files that are out of date writing output... building [html]: targets for 32 source files that are out of date updating environment: [new config] 32 added, 0 changed, 0 removed reading sources... [100%] run_scripts WARNING: autodoc: failed to import module 'actions' from module 'backend'; the following exception was raised: No module named 'backend' WARNING: autodoc: failed to import module 'constants' from module 'backend'; the following exception was raised: No module named 'backend' WARNING: autodoc: failed to import module 'createrepo' from module 'backend'; the following exception was raised: No module named 'backend' WARNING: autodoc: failed to import module 'daemons.backend' from module 'backend'; the following exception was raised: No module named 'backend' WARNING: autodoc: failed to import module 'daemons.dispatcher' from module 'backend'; the following exception was raised: No module named 'backend' WARNING: autodoc: failed to import module 'daemons.job_grab' from module 'backend'; the following exception was raised: No module named 'backend' WARNING: autodoc: failed to import module 'daemons.log' from module 'backend'; the following exception was raised: No module named 'backend' WARNING: autodoc: failed to import module 'daemons.vm_master' from module 'backend'; the following exception was raised: No module named 'backend' WARNING: autodoc: failed to import module 'exceptions' from module 'backend'; the following exception was raised: No module named 'backend' WARNING: autodoc: failed to import module 'frontend' from module 'backend'; the following exception was raised: No module named 'backend' WARNING: autodoc: failed to import module 'helpers' from module 'backend'; the following exception was raised: No module named 'backend' WARNING: autodoc: failed to import module 'job' from module 'backend'; the following exception was raised: No module named 'backend' WARNING: autodoc: failed to import module 'mockremote.__init__' from module 'backend'; the following exception was raised: No module named 'backend' WARNING: autodoc: failed to import module 'mockremote.builder' from module 'backend'; the following exception was raised: No module named 'backend' WARNING: autodoc: failed to import module 'sign' from module 'backend'; the following exception was raised: No module named 'backend' WARNING: autodoc: failed to import module 'vm_manage.__init__' from module 'backend'; the following exception was raised: No module named 'backend' WARNING: autodoc: failed to import module 'vm_manage.check' from module 'backend'; the following exception was raised: No module named 'backend' WARNING: autodoc: failed to import module 'vm_manage.event_handle' from module 'backend'; the following exception was raised: No module named 'backend' WARNING: autodoc: failed to import module 'vm_manage.executor' from module 'backend'; the following exception was raised: No module named 'backend' WARNING: autodoc: failed to import module 'vm_manage.manager' from module 'backend'; the following exception was raised: No module named 'backend' WARNING: autodoc: failed to import module 'vm_manage.models' from module 'backend'; the following exception was raised: No module named 'backend' WARNING: autodoc: failed to import module 'vm_manage.spawn' from module 'backend'; the following exception was raised: No module named 'backend' WARNING: autodoc: failed to import module 'vm_manage.terminate' from module 'backend'; the following exception was raised: No module named 'backend' looking for now-outdated files... none found pickling environment... done checking consistency... done preparing documents... done copying assets... copying static files... done copying extra files... done done writing output... [100%] run_scripts generating indices... genindex done highlighting module code... writing additional pages... search done dumping search index in English (code: en)... done dumping object inventory... done build succeeded, 23 warnings. The HTML pages are in build/html. Build finished. The HTML pages are in build/html. make: Leaving directory '/builddir/build/BUILD/copr-backend-git-11.8c774c3/docs' + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer ' + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld-errors -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes ' + /usr/bin/python3 setup.py build '--executable=/usr/bin/python3 -sP' running build running build_py creating build creating build/lib creating build/lib/copr_backend copying copr_backend/worker_manager.py -> build/lib/copr_backend copying copr_backend/vm_alloc.py -> build/lib/copr_backend copying copr_backend/sshcmd.py -> build/lib/copr_backend copying copr_backend/sign.py -> build/lib/copr_backend copying copr_backend/setup.py -> build/lib/copr_backend copying copr_backend/rpm_builds.py -> build/lib/copr_backend copying copr_backend/msgbus.py -> build/lib/copr_backend copying copr_backend/job.py -> build/lib/copr_backend copying copr_backend/hitcounter.py -> build/lib/copr_backend copying copr_backend/helpers.py -> build/lib/copr_backend copying copr_backend/frontend.py -> build/lib/copr_backend copying copr_backend/exceptions.py -> build/lib/copr_backend copying copr_backend/dispatcher.py -> build/lib/copr_backend copying copr_backend/createrepo.py -> build/lib/copr_backend copying copr_backend/constants.py -> build/lib/copr_backend copying copr_backend/cancellable_thread.py -> build/lib/copr_backend copying copr_backend/background_worker_build.py -> build/lib/copr_backend copying copr_backend/background_worker.py -> build/lib/copr_backend copying copr_backend/app.py -> build/lib/copr_backend copying copr_backend/ans_utils.py -> build/lib/copr_backend copying copr_backend/actions.py -> build/lib/copr_backend copying copr_backend/__init__.py -> build/lib/copr_backend creating build/lib/copr_backend/stats_templates copying copr_backend/stats_templates/__init__.py -> build/lib/copr_backend/stats_templates creating build/lib/copr_backend/daemons copying copr_backend/daemons/log.py -> build/lib/copr_backend/daemons copying copr_backend/daemons/build_dispatcher.py -> build/lib/copr_backend/daemons copying copr_backend/daemons/action_dispatcher.py -> build/lib/copr_backend/daemons copying copr_backend/daemons/__init__.py -> build/lib/copr_backend/daemons running egg_info creating copr_backend.egg-info writing copr_backend.egg-info/PKG-INFO writing dependency_links to copr_backend.egg-info/dependency_links.txt writing top-level names to copr_backend.egg-info/top_level.txt writing manifest file 'copr_backend.egg-info/SOURCES.txt' reading manifest file 'copr_backend.egg-info/SOURCES.txt' adding license file 'LICENSE' writing manifest file 'copr_backend.egg-info/SOURCES.txt' copying copr_backend/stats_templates/arches.html.j2 -> build/lib/copr_backend/stats_templates copying copr_backend/stats_templates/chroots.html.j2 -> build/lib/copr_backend/stats_templates copying copr_backend/stats_templates/distro.html.j2 -> build/lib/copr_backend/stats_templates copying copr_backend/stats_templates/index.html.j2 -> build/lib/copr_backend/stats_templates copying copr_backend/stats_templates/topmost.html.j2 -> build/lib/copr_backend/stats_templates + RPM_EC=0 ++ jobs -p + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.7nVwpT + umask 022 + cd /builddir/build/BUILD + '[' /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64 '!=' / ']' + rm -rf /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64 ++ dirname /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64 + mkdir -p /builddir/build/BUILDROOT + mkdir /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64 + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer ' + export CFLAGS + CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer ' + export CXXFLAGS + FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules ' + export FFLAGS + FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Cforce-frame-pointers=yes -Clink-arg=-specs=/usr/lib/rpm/redhat/redhat-package-notes --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld-errors -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes ' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib64: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd copr-backend-git-11.8c774c3 + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer ' + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld-errors -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes ' + /usr/bin/python3 setup.py install -O1 --skip-build --root /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64 --prefix /usr running install /usr/lib/python3.12/site-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. !! ******************************************************************************** Please avoid running ``setup.py`` directly. Instead, use pypa/build, pypa/installer or other standards-based tools. Follow the current Python packaging guidelines when building Python RPM packages. See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html and https://docs.fedoraproject.org/en-US/packaging-guidelines/Python/ for details. ******************************************************************************** !! self.initialize_options() running install_lib creating /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr creating /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib creating /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12 creating /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages creating /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend creating /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/daemons copying build/lib/copr_backend/daemons/__init__.py -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/daemons copying build/lib/copr_backend/daemons/action_dispatcher.py -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/daemons copying build/lib/copr_backend/daemons/build_dispatcher.py -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/daemons copying build/lib/copr_backend/daemons/log.py -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/daemons creating /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/stats_templates copying build/lib/copr_backend/stats_templates/topmost.html.j2 -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/stats_templates copying build/lib/copr_backend/stats_templates/index.html.j2 -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/stats_templates copying build/lib/copr_backend/stats_templates/distro.html.j2 -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/stats_templates copying build/lib/copr_backend/stats_templates/chroots.html.j2 -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/stats_templates copying build/lib/copr_backend/stats_templates/arches.html.j2 -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/stats_templates copying build/lib/copr_backend/stats_templates/__init__.py -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/stats_templates copying build/lib/copr_backend/__init__.py -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend copying build/lib/copr_backend/actions.py -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend copying build/lib/copr_backend/ans_utils.py -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend copying build/lib/copr_backend/app.py -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend copying build/lib/copr_backend/background_worker.py -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend copying build/lib/copr_backend/background_worker_build.py -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend copying build/lib/copr_backend/cancellable_thread.py -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend copying build/lib/copr_backend/constants.py -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend copying build/lib/copr_backend/createrepo.py -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend copying build/lib/copr_backend/dispatcher.py -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend copying build/lib/copr_backend/exceptions.py -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend copying build/lib/copr_backend/frontend.py -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend copying build/lib/copr_backend/helpers.py -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend copying build/lib/copr_backend/hitcounter.py -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend copying build/lib/copr_backend/job.py -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend copying build/lib/copr_backend/msgbus.py -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend copying build/lib/copr_backend/rpm_builds.py -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend copying build/lib/copr_backend/setup.py -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend copying build/lib/copr_backend/sign.py -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend copying build/lib/copr_backend/sshcmd.py -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend copying build/lib/copr_backend/vm_alloc.py -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend copying build/lib/copr_backend/worker_manager.py -> /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend byte-compiling /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/daemons/__init__.py to __init__.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/daemons/action_dispatcher.py to action_dispatcher.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/daemons/build_dispatcher.py to build_dispatcher.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/daemons/log.py to log.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/stats_templates/__init__.py to __init__.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/__init__.py to __init__.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/actions.py to actions.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/ans_utils.py to ans_utils.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/app.py to app.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/background_worker.py to background_worker.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/background_worker_build.py to background_worker_build.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/cancellable_thread.py to cancellable_thread.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/constants.py to constants.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/createrepo.py to createrepo.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/dispatcher.py to dispatcher.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/exceptions.py to exceptions.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/frontend.py to frontend.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/helpers.py to helpers.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/hitcounter.py to hitcounter.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/job.py to job.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/msgbus.py to msgbus.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/rpm_builds.py to rpm_builds.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/setup.py to setup.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/sign.py to sign.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/sshcmd.py to sshcmd.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/vm_alloc.py to vm_alloc.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend/worker_manager.py to worker_manager.cpython-312.pyc writing byte-compilation script '/tmp/tmpym8q96as.py' /usr/bin/python3 /tmp/tmpym8q96as.py removing /tmp/tmpym8q96as.py running install_egg_info running egg_info writing copr_backend.egg-info/PKG-INFO writing dependency_links to copr_backend.egg-info/dependency_links.txt writing top-level names to copr_backend.egg-info/top_level.txt reading manifest file 'copr_backend.egg-info/SOURCES.txt' adding license file 'LICENSE' writing manifest file 'copr_backend.egg-info/SOURCES.txt' Copying copr_backend.egg-info to /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12/site-packages/copr_backend-1.177-py3.12.egg-info running install_scripts + rm -rfv /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/bin/__pycache__ + install -d /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/var/lib/copr/public_html/results + install -d /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/share/doc/copr-backend/lighttpd/ + install -d /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/etc/copr + install -d /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/etc/logrotate.d/ + install -d /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/systemd/system + install -d /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64//var/log/copr-backend + install -d /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64//var/run/copr-backend/ + install -d /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64//usr/lib/tmpfiles.d + install -d /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64//usr/sbin + install -d /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/etc/cron.daily + install -d /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/etc/cron.weekly + install -d /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/etc/sudoers.d + install -d /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/bin/ + cp -a copr-backend-service /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64//usr/sbin/ + cp -a run/copr-assure-permissions run/copr-aws-s3-hitcounter run/copr-backend-analyze-results run/copr-backend-generate-graphs run/copr-backend-process-action run/copr-backend-process-build run/copr-backend-resultdir-cleaner run/copr-backend-unknown-resalloc-tickets.py run/copr-compress-live-logs run/copr-rename-chroot run/copr-repo run/copr-run-dispatcher-backend run/copr_find_obsolete_builds.sh run/copr_find_wrong_chroot_artifacts.py run/copr_fix_gpg.py run/copr_log_hitcounter.py run/copr_print_results_to_delete.py run/copr_prune_results.py run/copr_prune_srpms.py run/copr_run_logger.py run/copr_sign_unsigned.py run/print_queues.py /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/bin/ + cp -a conf/copr-be.conf.example /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/etc/copr/copr-be.conf + install -p -m 755 conf/crontab/daily /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/etc/cron.daily/copr-backend + install -p -m 755 conf/crontab/weekly /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/etc/cron.weekly/copr-backend + cp -a conf/lighttpd/dirlisting.conf conf/lighttpd/mime.conf /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/share/doc/copr-backend/lighttpd/ + cp -a conf/logrotate/copr-backend /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/etc/logrotate.d/ + cp -a conf/tmpfiles.d/copr-backend.conf /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64//usr/lib/tmpfiles.d + touch /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/var/log/copr-backend/copr.log + touch /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/var/log/copr-backend/prune_old.log + cp -a units/copr-backend.target units/copr-backend-action.service units/copr-backend-build.service units/copr-backend-log.service /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64//usr/lib/systemd/system/ + install -m 0644 conf/copr.sudoers.d /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/etc/sudoers.d/copr + install -d /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/etc/logstash.d + install -d /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/share/logstash/patterns/ + cp -a conf/logstash/lighttpd.pattern /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/share/logstash/patterns/lighttpd.pattern + install -d /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/share/doc/copr-backend/examples//etc/logstash.d + cp -a conf/logstash/copr_backend.conf /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/share/doc/copr-backend/examples//etc/logstash.d/copr_backend.conf + cp -a docs/build/html /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/share/doc/copr-backend/ + /usr/bin/find-debuginfo -j4 --strict-build-id -m -i --build-id-seed 1.177-1.git.11.f31c7c4.fc40 --unique-debug-suffix -1.177-1.git.11.f31c7c4.fc40.x86_64 --unique-debug-src-base copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000 -S debugsourcefiles.list /builddir/build/BUILD/copr-backend-git-11.8c774c3 find-debuginfo: starting Extracting debug info from 0 files Creating .debug symlinks for symlinks to ELF files find: ‘debug’: No such file or directory find-debuginfo: done + /usr/lib/rpm/check-buildroot + /usr/lib/rpm/redhat/brp-ldconfig + /usr/lib/rpm/brp-compress + /usr/lib/rpm/redhat/brp-strip-lto /usr/bin/strip + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/check-rpaths + /usr/lib/rpm/redhat/brp-mangle-shebangs mangling shebang in /etc/cron.weekly/copr-backend from /bin/sh to #!/usr/bin/sh mangling shebang in /usr/bin/copr_find_obsolete_builds.sh from /bin/bash to #!/usr/bin/bash mangling shebang in /usr/bin/copr-compress-live-logs from /bin/sh to #!/usr/bin/sh mangling shebang in /usr/sbin/copr-backend-service from /bin/sh to #!/usr/bin/sh + /usr/lib/rpm/brp-remove-la-files + env /usr/lib/rpm/redhat/brp-python-bytecompile '' 1 0 -j4 Bytecompiling .py files below /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/lib/python3.12 using python3.12 + /usr/lib/rpm/redhat/brp-python-hardlink Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.XVPKlG + umask 022 + cd /builddir/build/BUILD + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer ' + export CFLAGS + CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer ' + export CXXFLAGS + FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules ' + export FFLAGS + FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Cforce-frame-pointers=yes -Clink-arg=-specs=/usr/lib/rpm/redhat/redhat-package-notes --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld-errors -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes ' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib64: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd copr-backend-git-11.8c774c3 + ./run_tests.sh -vv --no-cov + set -e ++ dirname ./run_tests.sh + srcdir=. ++ grep -E '%global[[:space:]]*tests_version' ++ awk '{ print $3 }' + test_tarball_version=5 ++ grep -E '%global[[:space:]]*tests_tar' ++ awk '{ print $3 }' + test_tarball_name=test-data-copr-backend + test_tarball_extracted=test-data-copr-backend-5 + test_tarball=test-data-copr-backend-5.tar.gz + test -d test-data-copr-backend-5 + export TEST_DATA_DIRECTORY ++ readlink -f test-data-copr-backend-5 + TEST_DATA_DIRECTORY=/builddir/build/BUILD/copr-backend-git-11.8c774c3/test-data-copr-backend-5 + REDIS_PORT=7777 + trap cleanup EXIT + redis-server --port 7777 ++ readlink -f ../common + common_path=/builddir/build/BUILD/common ++ readlink -f ../messaging + messaging_path=/builddir/build/BUILD/messaging + export PYTHONPATH=/builddir/build/BUILD/common:/builddir/build/BUILD/messaging:/builddir/build/BUILD/copr-backend-git-11.8c774c3:/builddir/build/BUILD/copr-backend-git-11.8c774c3/tests:/builddir/build/BUILD/copr-backend-git-11.8c774c3/run + PYTHONPATH=/builddir/build/BUILD/common:/builddir/build/BUILD/messaging:/builddir/build/BUILD/copr-backend-git-11.8c774c3:/builddir/build/BUILD/copr-backend-git-11.8c774c3/tests:/builddir/build/BUILD/copr-backend-git-11.8c774c3/run + export PATH=/builddir/build/BUILD/copr-backend-git-11.8c774c3/run:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/sbin + PATH=/builddir/build/BUILD/copr-backend-git-11.8c774c3/run:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/sbin + COVPARAMS=(--cov-report term-missing --cov ./copr_backend --cov ./run) + KEEP_ARGS=() + for arg in "$@" + case $arg in + KEEP_ARGS+=("$arg") + for arg in "$@" + case $arg in + COVPARAMS=() + python3 -m pytest -s tests -vv ============================= test session starts ============================== platform linux -- Python 3.12.3, pytest-7.4.3, pluggy-1.3.0 -- /usr/bin/python3 cachedir: .pytest_cache rootdir: /builddir/build/BUILD/copr-backend-git-11.8c774c3 collecting ... collected 187 items tests/test_action.py::TestAction::test_action_run_legal_flag PASSED tests/test_action.py::TestAction::test_action_handle_forks PASSED tests/test_action.py::TestAction::test_action_run_rename SKIPPED (Fixme, test doesn't work.) tests/test_action.py::TestAction::test_action_run_rename_success_on_empty_src SKIPPED tests/test_action.py::TestAction::test_action_run_rename_failure_on_destination_exists SKIPPED tests/test_action.py::TestAction::test_action_run_delete_copr PASSED tests/test_action.py::TestAction::test_action_run_delete_copr_remove_folders SKIPPED tests/test_action.py::TestAction::test_delete_no_chroot_dirs PASSED tests/test_action.py::TestAction::test_delete_build_succeeded PASSED tests/test_action.py::TestAction::test_delete_build_acr_reflected[False] PASSED tests/test_action.py::TestAction::test_delete_build_acr_reflected[True] PASSED tests/test_action.py::TestAction::test_delete_build_succeeded_createrepo_error PASSED tests/test_action.py::TestAction::test_delete_two_chroots PASSED tests/test_action.py::TestAction::test_delete_two_chroots_two_remain PASSED tests/test_action.py::TestAction::test_delete_build_with_bad_pkg_name PASSED tests/test_action.py::TestAction::test_delete_multiple_builds_succeeded PASSED tests/test_action.py::TestAction::test_handle_createrepo_ok[False] PASSED tests/test_action.py::TestAction::test_handle_createrepo_ok[True] PASSED tests/test_action.py::TestAction::test_handle_createrepo_failure_1 PASSED tests/test_action.py::TestAction::test_handle_generate_gpg_key SKIPPED tests/test_action.py::TestAction::test_request_exception_is_taken_care_of_when_posting_to_frontend SKIPPED tests/test_action.py::TestAction::test_delete_chroot PASSED tests/test_action.py::TestAction::test_comps_create PASSED tests/test_action.py::TestAction::test_remove_dirs PASSED tests/test_background_worker_build.py::test_waiting_for_repo_fail PASSED tests/test_background_worker_build.py::test_waiting_for_repo_success PASSED tests/test_background_worker_build.py::test_full_rpm_build_no_sign PASSED tests/test_background_worker_build.py::test_prev_build_backup PASSED tests/test_background_worker_build.py::test_full_srpm_build PASSED tests/test_background_worker_build.py::test_build_and_sign PASSED tests/test_background_worker_build.py::test_sign_built_packages_exception PASSED tests/test_background_worker_build.py::test_unexpected_exception PASSED tests/test_background_worker_build.py::test_build_info_file_failure PASSED tests/test_background_worker_build.py::test_invalid_job_info PASSED tests/test_background_worker_build.py::test_cancel_build_on_vm_allocation PASSED tests/test_background_worker_build.py::test_cancel_build_on_tail_log_no_ssh PASSED tests/test_background_worker_build.py::test_cancel_before_vm PASSED tests/test_background_worker_build.py::test_cancel_before_start PASSED tests/test_background_worker_build.py::test_build_retry PASSED tests/test_background_worker_build.py::test_fe_disallowed_start PASSED tests/test_background_worker_build.py::test_fe_failed_start PASSED tests/test_background_worker_build.py::test_cancel_script_failure PASSED tests/test_background_worker_build.py::test_cancel_build_during_log_download PASSED tests/test_background_worker_build.py::test_ssh_connection_error PASSED tests/test_background_worker_build.py::test_average_step PASSED tests/test_background_worker_build.py::test_retry_for_ssh_tail_failure PASSED tests/test_background_worker_build.py::test_build_failure PASSED tests/test_background_worker_build.py::test_createrepo_failure PASSED tests/test_background_worker_build.py::test_existing_compressed_file PASSED tests/test_background_worker_build.py::test_tail_f_nonzero_exit PASSED tests/test_background_worker_build.py::test_wrong_copr_rpmbuild_daemon_output PASSED tests/test_background_worker_build.py::test_unable_to_start_builder PASSED tests/test_background_worker_build.py::test_retry_vm_factory_take PASSED tests/test_background_worker_build.py::test_failed_build_retry PASSED tests/test_background_worker_build.py::test_buildjob_tags PASSED tests/test_background_worker_build.py::test_task_url PASSED tests/test_build_dispatcher.py::test_priority_numbers PASSED tests/test_build_dispatcher.py::test_frontend_priority[True-2000000] PASSED tests/test_build_dispatcher.py::test_frontend_priority[False-0] PASSED tests/test_build_dispatcher.py::test_sandbox_priority PASSED tests/test_config_reader.py::TestBackendConfigReader::test_minimal_file_and_defaults PASSED tests/test_config_reader.py::TestBackendConfigReader::test_correct_build_limits PASSED tests/test_config_reader.py::TestBackendConfigReader::test_invalid_limits[builds_max_workers=asdfa\n] PASSED tests/test_config_reader.py::TestBackendConfigReader::test_invalid_limits[actions_max_workers=asdfa\n] PASSED tests/test_config_reader.py::TestBackendConfigReader::test_invalid_build_limits[builds_max_workers_arch=abc\n] PASSED tests/test_config_reader.py::TestBackendConfigReader::test_invalid_build_limits[builds_max_workers_arch=abc=asdf\n] PASSED tests/test_config_reader.py::TestBackendConfigReader::test_invalid_build_limits[builds_max_workers_arch=abc=10=\n] PASSED tests/test_config_reader.py::TestBackendConfigReader::test_invalid_build_limits[builds_max_workers_arch=abc=1,\n] PASSED tests/test_config_reader.py::TestBackendConfigReader::test_invalid_build_limits[builds_max_workers_tag=abc=1,\n] PASSED tests/test_createrepo.py::TestBatchedCreaterepo::test_batched_createrepo_normal PASSED tests/test_createrepo.py::TestBatchedCreaterepo::test_batched_createrepo_already_done PASSED tests/test_createrepo.py::TestBatchedCreaterepo::test_batched_createrepo_other_already_done PASSED tests/test_createrepo.py::TestBatchedCreaterepo::test_batched_createrepo_devel_mismatch PASSED tests/test_createrepo.py::TestBatchedCreaterepo::test_batched_createrepo_full_we_take_others PASSED tests/test_createrepo.py::TestBatchedCreaterepo::test_batched_createrepo_full_others_take_us PASSED tests/test_createrepo.py::TestBatchedCreaterepo::test_batched_createrepo_task_limit PASSED tests/test_frontend.py::TestFrontendClient::test_post_to_frontend[get] PASSED tests/test_frontend.py::TestFrontendClient::test_post_to_frontend[post] PASSED tests/test_frontend.py::TestFrontendClient::test_post_to_frontend[put] PASSED tests/test_frontend.py::TestFrontendClient::test_post_to_frontend_wrappers[get] PASSED tests/test_frontend.py::TestFrontendClient::test_post_to_frontend_wrappers[post] PASSED tests/test_frontend.py::TestFrontendClient::test_post_to_frontend_wrappers[put] PASSED tests/test_frontend.py::TestFrontendClient::test_post_to_frontend_repeated_first_try_ok PASSED tests/test_frontend.py::TestFrontendClient::test_post_to_frontend_repeated_second_try_ok[get] PASSED tests/test_frontend.py::TestFrontendClient::test_post_to_frontend_repeated_second_try_ok[post] PASSED tests/test_frontend.py::TestFrontendClient::test_post_to_frontend_repeated_second_try_ok[put] PASSED tests/test_frontend.py::TestFrontendClient::test_post_to_frontend_err_400 PASSED tests/test_frontend.py::TestFrontendClient::test_post_to_frontend_repeated_all_attempts_failed PASSED tests/test_frontend.py::TestFrontendClient::test_post_to_frontend_repeated_indefinitely PASSED tests/test_frontend.py::TestFrontendClient::test_retries_on_outdated_frontend PASSED tests/test_frontend.py::TestFrontendClient::test_update PASSED tests/test_frontend.py::TestFrontendClient::test_starting_build PASSED tests/test_frontend.py::TestFrontendClient::test_starting_build_err PASSED tests/test_frontend.py::TestFrontendClient::test_starting_build_err_2 PASSED tests/test_frontend.py::TestFrontendClient::test_reschedule_build PASSED tests/test_helpers.py::TestHelpers::test_redis_logger_exception PASSED tests/test_helpers.py::TestHelpers::test_get_chroot_arch PASSED tests/test_helpers.py::TestHelpers::test_format_filename PASSED tests/test_helpers.py::TestHelpers::test_walk_limited PASSED tests/test_helpers.py::TestHelpers::test_recursive_copy_and_link_rpms PASSED tests/test_modifyrepo.py::TestModifyRepo::test_copr_modifyrepo_locks PASSED tests/test_modifyrepo.py::TestModifyRepo::test_copr_repo_add_subdir PASSED tests/test_modifyrepo.py::TestModifyRepo::test_copr_repo_batched_createrepo PASSED tests/test_modifyrepo.py::TestModifyRepo::test_copr_repo_batched_already_processed PASSED tests/test_modifyrepo.py::TestModifyRepo::test_copr_repo_batched_two_builds PASSED tests/test_modifyrepo.py::TestModifyRepo::test_copr_repo_batched_full PASSED tests/test_modifyrepo.py::TestModifyRepo::test_copr_repo_batched_others_full PASSED tests/test_modifyrepo.py::TestModifyRepo::test_copr_repo_add_del_mixup PASSED tests/test_modifyrepo.py::TestModifyRepo::test_copr_repo_add_subdir_devel PASSED tests/test_modifyrepo.py::TestModifyRepo::test_copr_repo_subdir_validator[add0] PASSED tests/test_modifyrepo.py::TestModifyRepo::test_copr_repo_subdir_validator[add1] PASSED tests/test_modifyrepo.py::TestModifyRepo::test_copr_repo_subdir_validator[add2] PASSED tests/test_modifyrepo.py::TestModifyRepo::test_copr_repo_subdir_validator[add3] PASSED tests/test_modifyrepo.py::TestModifyRepo::test_copr_repo_subdir_none_doesnt_raise PASSED tests/test_modifyrepo.py::TestModifyRepo::test_copr_repo_do_stat PASSED tests/test_modifyrepo.py::TestModifyRepo::test_copr_repo_run_createrepo[True-fedora-37---no-database] PASSED tests/test_modifyrepo.py::TestModifyRepo::test_copr_repo_run_createrepo[False-centos-stream-8---no-database] PASSED tests/test_modifyrepo.py::TestModifyRepo::test_copr_repo_run_createrepo[True-rhel-8---no-database] PASSED tests/test_modifyrepo.py::TestModifyRepo::test_copr_repo_run_createrepo[False-epel-8---no-database] PASSED tests/test_modifyrepo.py::TestModifyRepo::test_copr_repo_el5 SKIPPED tests/test_modifyrepo.py::TestModifyRepo::test_copr_repo_noop PASSED tests/test_modifyrepo.py::TestModifyRepo::test_copr_repo_rpms_to_remove_in_call PASSED tests/test_modifyrepo.py::TestModifyRepo::test_copr_repo_rpms_to_remove_passes PASSED tests/test_modifyrepo.py::TestModifyRepo::test_copr_repo_rpms_to_remove_passes_2 PASSED tests/test_modifyrepo.py::TestModifyRepo::test_copr_repo_rpms_to_remove_passes_3 PASSED tests/test_modifyrepo.py::TestModifyRepo::test_comps_present PASSED tests/test_modifyrepo.py::TestModifyRepo::test_run_prunerepo SKIPPED tests/test_modifyrepo.py::TestModifyRepo::test_pruner_arg_max PASSED tests/test_modifyrepo.py::TestModifyRepo::test_copr_repo_timeouted_check[True] PASSED tests/test_modifyrepo.py::TestModifyRepo::test_copr_repo_timeouted_check[False] PASSED tests/test_modifyrepo.py::test_aws_cdn_refresh PASSED tests/test_sign.py::TestSign::test_get_pubkey PASSED tests/test_sign.py::TestSign::test_get_pubkey_error PASSED tests/test_sign.py::TestSign::test_get_pubkey_unknown_key PASSED tests/test_sign.py::TestSign::test_get_pubkey_unknown_error PASSED tests/test_sign.py::TestSign::test_get_pubkey_outfile PASSED tests/test_sign.py::TestSign::test_sign_one PASSED tests/test_sign.py::TestSign::test_sign_one_popen_error PASSED tests/test_sign.py::TestSign::test_sign_one_cmd_erro PASSED tests/test_sign.py::TestSign::test_call_sign_bin_repeatedly PASSED tests/test_sign.py::TestSign::test_create_user_keys PASSED tests/test_sign.py::TestSign::test_create_user_keys_error_1 PASSED tests/test_sign.py::TestSign::test_create_user_keys_err PASSED tests/test_sign.py::TestSign::test_sign_rpms_id_dir_nothing PASSED tests/test_sign.py::TestSign::test_sign_rpms_id_dir_ok PASSED tests/test_sign.py::TestSign::test_sign_rpms_id_dir_error_on_pubkey PASSED tests/test_sign.py::TestSign::test_sign_rpms_id_dir_no_pub_key PASSED tests/test_sign.py::TestSign::test_sign_rpms_id_dir_sign_error_one PASSED tests/test_sign.py::TestSign::test_sign_rpms_id_dir_sign_error_all PASSED tests/test_sign.py::test_chroot_gpg_hashes PASSED tests/test_sshcmd.py::test_ipv4_ipv6_rsync PASSED tests/test_vm_alloc.py::test_ticket PASSED tests/test_vm_alloc.py::test_ticket_with_args PASSED tests/test_vm_alloc.py::test_ticket_wait_ready_normal PASSED tests/test_vm_alloc.py::test_ticket_wait_ready_raises PASSED tests/test_vm_alloc.py::test_ticket_wait_ready_fallback PASSED tests/test_worker_limits.py::test_predicate_worker_limit PASSED tests/test_worker_limits.py::test_predicate_worker_limit_sometimes PASSED tests/test_worker_limits.py::test_group_worker_limit PASSED tests/test_worker_limits.py::test_worker_limit_info PASSED tests/test_worker_limits.py::test_string_counter PASSED tests/test_worker_manager.py::TestPrioQueue::test_queue_order PASSED tests/test_worker_manager.py::TestPrioQueue::test_pop_push PASSED tests/test_worker_manager.py::TestPrioQueue::test_push_back PASSED tests/test_worker_manager.py::TestPrioQueue::test_shift_prio PASSED tests/test_worker_manager.py::TestLimitedWorkerManager::test_that_limits_are_respected PASSED tests/test_worker_manager.py::TestWorkerManager::test_worker_starts PASSED tests/test_worker_manager.py::TestWorkerManager::test_number_of_tasks PASSED tests/test_worker_manager.py::TestWorkerManager::test_task_to_worker_id PASSED tests/test_worker_manager.py::TestWorkerManager::test_preexisting_broken_worker PASSED tests/test_worker_manager.py::TestWorkerManager::test_cancel_task PASSED tests/test_worker_manager.py::TestWorkerManager::test_slow_priority_queue_filling PASSED tests/test_worker_manager.py::TestActionWorkerManager::test_run_starts_the_workers PASSED tests/test_worker_manager.py::TestActionWorkerManager::test_delete_not_allocated_workers PASSED tests/test_worker_manager.py::TestActionWorkerManager::test_delete_not_started_workers PASSED tests/test_worker_manager.py::TestActionWorkerManager::test_delete_not_finished_workers[FAIL_STARTED_PID] PASSED tests/test_worker_manager.py::TestActionWorkerManager::test_delete_not_finished_workers[FAIL_STARTED] PASSED tests/test_worker_manager.py::TestActionWorkerManager::test_all_passed PASSED tests/test_worker_manager.py::TestActionWorkerManager::test_add_task_for_running_worker PASSED tests/test_worker_manager.py::TestActionWorkerManager::test_empty_queue_but_workers_running PASSED tests/test_worker_manager.py::TestActionWorkerManager::test_that_we_check_aliveness PASSED tests/test_worker_manager.py::TestActionWorkerManager::test_max_workers_has_effect PASSED tests/test_worker_manager.py::TestActionWorkerManagerPriorities::test_actions_priorities PASSED tests/test_worker_manager.py::TestActionWorkerManagerPriorities::test_backend_priority_adjustments PASSED tests/run/test_copr_prune_results.py::TestPruneResults::test_run SKIPPED tests/run/test_copr_prune_results.py::TestPruneResults::test_project_skipped_when_acr_disabled SKIPPED tests/run/test_copr_prune_results.py::TestPruneResults::test_main SKIPPED =============================== warnings summary =============================== ../../../../usr/lib/python3.12/site-packages/munch/__init__.py:24 /usr/lib/python3.12/site-packages/munch/__init__.py:24: DeprecationWarning: pkg_resources is deprecated as an API. See https://setuptools.pypa.io/en/latest/pkg_resources.html import pkg_resources tests/test_frontend.py:14 /builddir/build/BUILD/copr-backend-git-11.8c774c3/tests/test_frontend.py:14: PytestDeprecationWarning: @pytest.yield_fixture is deprecated. Use @pytest.fixture instead; they are the same. @pytest.yield_fixture tests/test_frontend.py:29 /builddir/build/BUILD/copr-backend-git-11.8c774c3/tests/test_frontend.py:29: PytestDeprecationWarning: @pytest.yield_fixture is deprecated. Use @pytest.fixture instead; they are the same. @pytest.yield_fixture tests/daemons/test_log.py:18 /builddir/build/BUILD/copr-backend-git-11.8c774c3/tests/daemons/test_log.py:18: PytestDeprecationWarning: @pytest.yield_fixture is deprecated. Use @pytest.fixture instead; they are the same. @pytest.yield_fixture tests/daemons/test_log.py:24 /builddir/build/BUILD/copr-backend-git-11.8c774c3/tests/daemons/test_log.py:24: PytestDeprecationWarning: @pytest.yield_fixture is deprecated. Use @pytest.fixture instead; they are the same. @pytest.yield_fixture tests/run/test_copr_prune_results.py:21 /builddir/build/BUILD/copr-backend-git-11.8c774c3/tests/run/test_copr_prune_results.py:21: PytestDeprecationWarning: @pytest.yield_fixture is deprecated. Use @pytest.fixture instead; they are the same. @pytest.yield_fixture tests/run/test_copr_prune_results.py:26 /builddir/build/BUILD/copr-backend-git-11.8c774c3/tests/run/test_copr_prune_results.py:26: PytestDeprecationWarning: @pytest.yield_fixture is deprecated. Use @pytest.fixture instead; they are the same. @pytest.yield_fixture tests/run/test_copr_prune_results.py:31 /builddir/build/BUILD/copr-backend-git-11.8c774c3/tests/run/test_copr_prune_results.py:31: PytestDeprecationWarning: @pytest.yield_fixture is deprecated. Use @pytest.fixture instead; they are the same. @pytest.yield_fixture tests/run/test_copr_prune_results.py:36 /builddir/build/BUILD/copr-backend-git-11.8c774c3/tests/run/test_copr_prune_results.py:36: PytestDeprecationWarning: @pytest.yield_fixture is deprecated. Use @pytest.fixture instead; they are the same. @pytest.yield_fixture tests/test_action.py: 5 warnings tests/test_modifyrepo.py: 16 warnings tests/run/test_copr_prune_results.py: 3 warnings /usr/lib64/python3.12/tarfile.py:2221: DeprecationWarning: Python 3.14 will, by default, filter extracted tar archives and reject files or modify their metadata. Use the filter argument to control this behavior. warnings.warn( tests/test_action.py::TestAction::test_comps_create /usr/lib/python3.12/site-packages/httpretty/core.py:1077: DeprecationWarning: datetime.datetime.utcnow() is deprecated and scheduled for removal in a future version. Use timezone-aware objects to represent datetimes in UTC: datetime.datetime.now(datetime.UTC). now = datetime.utcnow() tests/test_worker_manager.py::TestActionWorkerManager::test_add_task_for_running_worker /usr/lib64/python3.12/copy.py:151: DeprecationWarning: Pickle, copy, and deepcopy support will be removed from itertools in Python 3.14. rv = reductor(4) -- Docs: https://docs.pytest.org/en/stable/how-to/capture-warnings.html ================ 176 passed, 11 skipped, 35 warnings in 50.77s ================= [INFO/MainProcess] process shutting down [INFO/MainProcess] process shutting down + cleanup + redis-cli -p 7777 shutdown + wait + RPM_EC=0 ++ jobs -p + exit 0 Processing files: copr-backend-1.177-1.git.11.f31c7c4.fc40.noarch Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.8arLbl + umask 022 + cd /builddir/build/BUILD + cd copr-backend-git-11.8c774c3 + LICENSEDIR=/builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/share/licenses/copr-backend + export LC_ALL= + LC_ALL= + export LICENSEDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/share/licenses/copr-backend + cp -pr /builddir/build/BUILD/copr-backend-git-11.8c774c3/LICENSE /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/share/licenses/copr-backend + RPM_EC=0 ++ jobs -p + exit 0 Provides: config(copr-backend) = 1.177-1.git.11.f31c7c4.fc40 copr-backend = 1.177-1.git.11.f31c7c4.fc40 python3.12dist(copr-backend) = 1.177 python3dist(copr-backend) = 1.177 Requires(interp): /bin/sh /bin/sh /bin/sh /bin/sh Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(pre): /bin/sh Requires(post): /bin/sh systemd Requires(preun): /bin/sh systemd Requires(postun): /bin/sh systemd Requires: /usr/bin/bash /usr/bin/python3 /usr/bin/sh python(abi) = 3.12 Recommends: group(copr) logrotate python3-copr-messaging python3-fedmsg user(copr) util-linux-core Suggests: awscli Processing files: copr-backend-doc-1.177-1.git.11.f31c7c4.fc40.noarch Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.hTOT7u + umask 022 + cd /builddir/build/BUILD + cd copr-backend-git-11.8c774c3 + LICENSEDIR=/builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/share/licenses/copr-backend-doc + export LC_ALL= + LC_ALL= + export LICENSEDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/share/licenses/copr-backend-doc + cp -pr /builddir/build/BUILD/copr-backend-git-11.8c774c3/LICENSE /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64/usr/share/licenses/copr-backend-doc + RPM_EC=0 ++ jobs -p + exit 0 Provides: copr-backend-doc = 1.177-1.git.11.f31c7c4.fc40 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Checking for unpackaged file(s): /usr/lib/rpm/check-files /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64 Wrote: /builddir/build/RPMS/copr-backend-doc-1.177-1.git.11.f31c7c4.fc40.noarch.rpm Wrote: /builddir/build/RPMS/copr-backend-1.177-1.git.11.f31c7c4.fc40.noarch.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.v34H9W + umask 022 + cd /builddir/build/BUILD + cd copr-backend-git-11.8c774c3 + /usr/bin/rm -rf /builddir/build/BUILDROOT/copr-backend-1.177-1.git.11.f31c7c4.fc40.x86_64 + RPM_EC=0 ++ jobs -p + exit 0 Executing(rmbuild): /bin/sh -e /var/tmp/rpm-tmp.ZtcGMJ + umask 022 + cd /builddir/build/BUILD + rm -rf /builddir/build/BUILD/copr-backend-git-11.8c774c3-SPECPARTS + rm -rf copr-backend-git-11.8c774c3 copr-backend-git-11.8c774c3.gemspec + RPM_EC=0 ++ jobs -p + exit 0 Finish: rpmbuild copr-backend-1.177-1.git.11.f31c7c4.fc40.src.rpm Finish: build phase for copr-backend-1.177-1.git.11.f31c7c4.fc40.src.rpm INFO: chroot_scan: 1 files copied to /var/lib/copr-rpmbuild/results/chroot_scan INFO: /var/lib/mock/fedora-40-x86_64-1718178692.047821/root/var/log/dnf5.log INFO: Done(/var/lib/copr-rpmbuild/results/copr-backend-1.177-1.git.11.f31c7c4.fc40.src.rpm) Config(child) 1 minutes 5 seconds INFO: Results and/or logs in: /var/lib/copr-rpmbuild/results INFO: Cleaning up build root ('cleanup_on_success=True') Start: clean chroot INFO: unmounting tmpfs. Finish: clean chroot Finish: run Running RPMResults tool Package info: { "packages": [ { "name": "copr-backend", "epoch": null, "version": "1.177", "release": "1.git.11.f31c7c4.fc40", "arch": "noarch" }, { "name": "copr-backend", "epoch": null, "version": "1.177", "release": "1.git.11.f31c7c4.fc40", "arch": "src" }, { "name": "copr-backend-doc", "epoch": null, "version": "1.177", "release": "1.git.11.f31c7c4.fc40", "arch": "noarch" } ] } RPMResults finished