# 389-ds-base 1.4 no longer supports i686 platform, build only client
# packages, https://bugzilla.redhat.com/show_bug.cgi?id=1544386
%if 0%{?fedora} >= 28 || 0%{?rhel} > 7
    %ifarch %{ix86}
        %{!?ONLY_CLIENT:%global ONLY_CLIENT 1}
    %endif
%endif

# Define ONLY_CLIENT to only make the ipa-client and ipa-python
# subpackages
%{!?ONLY_CLIENT:%global ONLY_CLIENT 0}
%if %{ONLY_CLIENT}
    %global enable_server_option --disable-server
%else
    %global enable_server_option --enable-server
%endif

# Build ipatests
%if 0%{?rhel}
    %global with_ipatests 0
%endif
%if ! %{ONLY_CLIENT}
    %{!?with_ipatests:%global with_ipatests 1}
%endif
%if 0%{?with_ipatests}
    %global with_ipatests_option --with-ipatests
%else
    %global with_ipatests_option --without-ipatests
%endif

# lint is not executed during rpmbuild
# %%global with_lint 1
%if 0%{?with_lint}
    %global linter_options --enable-pylint --without-jslint --enable-rpmlint
%else
    %global linter_options --disable-pylint --without-jslint --disable-rpmlint
%endif

# Include SELinux subpackage
%if 0%{?fedora} >= 30 || 0%{?rhel}
    %global with_selinux 1
    %global selinuxtype targeted
    %global modulename ipa
%endif

%if 0%{?rhel}
%global package_name ipa
%global alt_name freeipa
%global krb5_version 1.18
%global krb5_kdb_version 8.0
# 0.7.16: https://github.com/drkjam/netaddr/issues/71
%global python_netaddr_version 0.7.16
# Require 4.7.0 which brings Python 3 bindings
%global samba_version 4.7.0
%global selinux_policy_version 3.14.3-21
%global slapi_nis_version 0.56.1-4
%global python_ldap_version 3.1.0-1
%if 0%{?rhel} < 9
# Bug 1929067 - PKI instance creation failed with new 389-ds-base build
%global ds_version 1.4.3.16-12
%else
%global ds_version 2.0.3-3
%endif

# Fix for TLS 1.3 PHA, RHBZ#1775158
%global httpd_version 2.4.37-21
%global systemd_version 239

%else
# Fedora
%global package_name freeipa
%global alt_name ipa
# Fix for CVE-2018-20217
%global krb5_version 1.16.1-24
# 0.7.16: https://github.com/drkjam/netaddr/issues/71
%global python_netaddr_version 0.7.16
# Require 4.7.0 which brings Python 3 bindings
%global samba_version 2:4.7.0
# SELinux context for dirsrv unit file, BZ 1820298
%if 0%{?fedora} >= 32
%global selinux_policy_version 3.14.5-39
%else
%global selinux_policy_version 3.14.4-52
%endif
%global slapi_nis_version 0.56.1

# krb5 can only provide one KDB at a time
%if 0%{?fedora} >= 32
%global krb5_kdb_version 8.0
%else
%global krb5_kdb_version 7.0
%endif

# fix for segfault in python3-ldap, https://pagure.io/freeipa/issue/7324
%global python_ldap_version 3.1.0-1

# Make sure to use 389-ds-base versions that fix https://github.com/389ds/389-ds-base/issues/4609
%if 0%{?fedora} < 34
%global ds_version %{lua: local v={}; v['32']='1.4.3.20-2'; v['33']='1.4.4.13-2'; print(v[rpm.expand('%{fedora}')])}
%else
%global ds_version 2.0.3-3
%endif

# Fix for TLS 1.3 PHA, RHBZ#1775146
%if 0%{?fedora} >= 31
%global httpd_version 2.4.41-9
%else
%global httpd_version 2.4.41-6.1
%endif

# Don't use Fedora's Python dependency generator on Fedora 30/rawhide yet.
# Some packages don't provide new dist aliases.
# https://docs.fedoraproject.org/en-US/packaging-guidelines/Python/
%{?python_disable_dependency_generator}

# Fedora
%endif

%if 0%{?rhel} == 8
# Make sure to use PKI versions that work with 389-ds fix for https://github.com/389ds/389-ds-base/issues/4609
%global pki_version 10.10.5
%else
# Make sure to use PKI versions that work with 389-ds fix for https://github.com/389ds/389-ds-base/issues/4609
%global pki_version 10.10.5
%endif

# https://pagure.io/certmonger/issue/90
%global certmonger_version 0.79.7-1

# NSS release with fix for p11-kit-proxy issue, affects F28
# https://pagure.io/freeipa/issue/7810
%if 0%{?fedora} == 28
%global nss_version 3.41.0-3
%else
%global nss_version 3.41.0-1
%endif

# One-Way Trust authenticated by trust secret
# https://bugzilla.redhat.com/show_bug.cgi?id=1345975#c20
%global sssd_version 1.16.3-2

%define krb5_base_version %(LC_ALL=C rpm -q --qf '%%{VERSION}' krb5-devel | grep -Eo '^[^.]+\.[^.]+')

%if 0%{?fedora} >= 33
# systemd with resolved enabled
# see https://pagure.io/freeipa/issue/8275
%global systemd_version 246.6-3
%else
%global systemd_version 245
%endif

%global plugin_dir %{_libdir}/dirsrv/plugins
%global etc_systemd_dir %{_sysconfdir}/systemd/system
%global gettext_domain ipa

%define _hardened_build 1

# Work-around fact that RPM SPEC parser does not accept
# "Version: 4.8.10.dev202110231104+git" in freeipa.spec.in used for Autoconf string replacement
%define IPA_VERSION 4.8.10.dev202110231104+git
%define AT_SIGN @
# redefine IPA_VERSION only if its value matches the Autoconf placeholder
%if "%{IPA_VERSION}" == "%{AT_SIGN}VERSION%{AT_SIGN}"
    %define IPA_VERSION nonsense.to.please.RPM.SPEC.parser
%endif

Name:           %{package_name}
Version:        %{IPA_VERSION}
Release:        0%{?dist}
Summary:        The Identity, Policy and Audit system

Group:          System Environment/Base
License:        GPLv3+
URL:            http://www.freeipa.org/
Source0:        freeipa-%{version}.tar.gz
BuildRoot:      %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)

BuildRequires:  openldap-devel
# For KDB DAL version, make explicit dependency so that increase of version
# will cause the build to fail due to unsatisfied dependencies.
# DAL version change may cause code crash or memory leaks, it is better to fail early.
BuildRequires:  krb5-kdb-version = %{krb5_kdb_version}
BuildRequires:  krb5-devel >= %{krb5_version}
# 1.27.4: xmlrpc_curl_xportparms.gssapi_delegation
BuildRequires:  xmlrpc-c-devel >= 1.27.4
BuildRequires:  popt-devel
BuildRequires:  gcc
BuildRequires:  make
BuildRequires:  pkgconfig
BuildRequires:  autoconf
BuildRequires:  automake
BuildRequires:  libtool
BuildRequires:  gettext
BuildRequires:  gettext-devel
BuildRequires:  python3-devel
BuildRequires:  python3-setuptools
BuildRequires:  systemd >= %{systemd_version}
# systemd-tmpfiles which is executed from make install requires apache user
BuildRequires:  httpd
BuildRequires:  nspr-devel
BuildRequires:  openssl-devel
BuildRequires:  libini_config-devel
BuildRequires:  cyrus-sasl-devel
%if ! %{ONLY_CLIENT}
BuildRequires:  389-ds-base-devel >= %{ds_version}
BuildRequires:  samba-devel >= %{samba_version}
BuildRequires:  libtalloc-devel
BuildRequires:  libtevent-devel
BuildRequires:  libuuid-devel
BuildRequires:  libpwquality-devel
BuildRequires:  libsss_idmap-devel
BuildRequires:  libsss_certmap-devel
BuildRequires:  libsss_nss_idmap-devel >= %{sssd_version}
BuildRequires:  nodejs(abi)
# use old dependency on RHEL 8 for now
%if 0%{?rhel}
BuildRequires:  uglify-js
%else
BuildRequires:  python3-rjsmin
%endif
BuildRequires:  libverto-devel
BuildRequires:  libunistring-devel
# 0.13.0: https://bugzilla.redhat.com/show_bug.cgi?id=1584773
# 0.13.0-2: fix for missing dependency on python-six
BuildRequires:  python3-lesscpy >= 0.13.0-2
BuildRequires:  cracklib-dicts

# ONLY_CLIENT
%endif

#
# Build dependencies for makeapi/makeaci
#
BuildRequires:  python3-cffi
BuildRequires:  python3-dns
BuildRequires:  python3-ldap >= %{python_ldap_version}
BuildRequires:  python3-libsss_nss_idmap
BuildRequires:  python3-netaddr >= %{python_netaddr_version}
BuildRequires:  python3-pyasn1
BuildRequires:  python3-pyasn1-modules
BuildRequires:  python3-six
BuildRequires:  python3-psutil

#
# Build dependencies for wheel packaging and PyPI upload
#
%if 0%{?with_wheels}
BuildRequires:  dbus-glib-devel
BuildRequires:  libffi-devel
BuildRequires:  python3-tox
%if 0%{?fedora} <= 28
BuildRequires:  python3-twine
%else
BuildRequires:  twine
%endif
BuildRequires:  python3-wheel
# with_wheels
%endif

#
# Build dependencies for lint and fastcheck
#
%if 0%{?with_lint}
BuildRequires:  git
%if 0%{?fedora} < 34
# jsl is orphaned in Fedora 34+
BuildRequires:  jsl
%endif
BuildRequires:  nss-tools
BuildRequires:  rpmlint
BuildRequires:  softhsm
BuildRequires:  keyutils
BuildRequires:  python3-augeas
BuildRequires:  python3-cffi
BuildRequires:  python3-cryptography >= 1.6
BuildRequires:  python3-custodia >= 0.3.1
BuildRequires:  python3-dateutil
BuildRequires:  python3-dbus
BuildRequires:  python3-dns >= 1.15
BuildRequires:  python3-docker
BuildRequires:  python3-gssapi >= 1.2.0
BuildRequires:  python3-jinja2
BuildRequires:  python3-jwcrypto >= 0.4.2
BuildRequires:  python3-ldap >= %{python_ldap_version}
BuildRequires:  python3-ldap >= %{python_ldap_version}
BuildRequires:  python3-lib389 >= %{ds_version}
BuildRequires:  python3-libipa_hbac
BuildRequires:  python3-libsss_nss_idmap
BuildRequires:  python3-lxml
BuildRequires:  python3-netaddr >= %{python_netaddr_version}
BuildRequires:  python3-netifaces
BuildRequires:  python3-paste
BuildRequires:  python3-pexpect
BuildRequires:  python3-pki >= %{pki_version}
BuildRequires:  python3-polib
BuildRequires:  python3-pyasn1
BuildRequires:  python3-pyasn1-modules
BuildRequires:  python3-pycodestyle
# .wheelconstraints.in limits pylint version in Azure and tox tests
BuildRequires:  python3-pylint
BuildRequires:  python3-pytest-multihost
BuildRequires:  python3-pytest-sourceorder
BuildRequires:  python3-qrcode-core >= 5.0.0
BuildRequires:  python3-samba
BuildRequires:  python3-six
BuildRequires:  python3-sss
BuildRequires:  python3-sss-murmur
BuildRequires:  python3-sssdconfig >= %{sssd_version}
BuildRequires:  python3-systemd
BuildRequires:  python3-yaml
BuildRequires:  python3-yubico
# with_lint
%endif

#
# Build dependencies for unit tests
#
%if ! %{ONLY_CLIENT}
BuildRequires:  libcmocka-devel
# Required by ipa_kdb_tests
BuildRequires:  krb5-server >= %{krb5_version}
# ONLY_CLIENT
%endif

#
# Build dependencies for SELinux policy
#
%if 0%{?with_selinux}
BuildRequires:  selinux-policy-devel
%endif

%description
IPA is an integrated solution to provide centrally managed Identity (users,
hosts, services), Authentication (SSO, 2FA), and Authorization
(host access control, SELinux user roles, services). The solution provides
features for further integration with Linux based clients (SUDO, automount)
and integration with Active Directory based infrastructures (Trusts).


%if ! %{ONLY_CLIENT}

%package server
Summary: The IPA authentication server
Group: System Environment/Base
Requires: %{name}-server-common = %{version}-%{release}
Requires: %{name}-client = %{version}-%{release}
Requires: %{name}-common = %{version}-%{release}
Requires: python3-ipaserver = %{version}-%{release}
Requires: python3-ldap >= %{python_ldap_version}
Requires: 389-ds-base >= %{ds_version}
Requires: openldap-clients > 2.4.35-4
Requires: nss-tools >= %{nss_version}
Requires(post): krb5-server >= %{krb5_version}
Requires(post): krb5-server >= %{krb5_base_version}, krb5-server < %{krb5_base_version}.100
Requires: krb5-pkinit-openssl >= %{krb5_version}
Requires: cyrus-sasl-gssapi%{?_isa}
Requires: chrony
Requires: httpd >= %{httpd_version}
Requires(preun): python3
Requires(postun): python3
Requires: python3-gssapi >= 1.2.0-5
Requires: python3-systemd
Requires: python3-mod_wsgi
Requires: mod_auth_gssapi >= 1.5.0
Requires: mod_ssl >= %{httpd_version}
Requires: mod_session >= %{httpd_version}
# 0.9.9: https://github.com/adelton/mod_lookup_identity/pull/3
Requires: mod_lookup_identity >= 0.9.9
Requires: acl
Requires: systemd-units >= %{systemd_version}
Requires(pre): systemd-units >= %{systemd_version}
Requires(post): systemd-units >= %{systemd_version}
Requires(preun): systemd-units >= %{systemd_version}
Requires(postun): systemd-units >= %{systemd_version}
Requires(pre): shadow-utils
Requires: selinux-policy >= %{selinux_policy_version}
Requires(post): selinux-policy-base >= %{selinux_policy_version}
Requires: slapi-nis >= %{slapi_nis_version}
Requires: pki-ca >= %{pki_version}
Requires: pki-kra >= %{pki_version}
Requires: policycoreutils >= 2.1.12-5
Requires: tar
Requires(pre): certmonger >= %{certmonger_version}
Requires(pre): 389-ds-base >= %{ds_version}
Requires: fontawesome-fonts
Requires: open-sans-fonts
Requires: openssl
Requires: softhsm >= 2.0.0rc1-1
Requires: p11-kit
Requires: %{etc_systemd_dir}
Requires: gzip
Requires: oddjob
# 0.7.0-2: https://pagure.io/gssproxy/pull-request/172
Requires: gssproxy >= 0.7.0-2
Requires: sssd-dbus >= %{sssd_version}
Requires: libpwquality
Requires: cracklib-dicts

Provides: %{alt_name}-server = %{version}
Conflicts: %{alt_name}-server
Obsoletes: %{alt_name}-server < %{version}

# With FreeIPA 3.3, package freeipa-server-selinux was obsoleted as the
# entire SELinux policy is stored in the system policy
Obsoletes: freeipa-server-selinux < 3.3.0

# upgrade path from monolithic -server to -server + -server-dns
Obsoletes: %{name}-server <= 4.2.0

# Versions of nss-pam-ldapd < 0.8.4 require a mapping from uniqueMember to
# member.
Conflicts: nss-pam-ldapd < 0.8.4

%description server
IPA is an integrated solution to provide centrally managed Identity (users,
hosts, services), Authentication (SSO, 2FA), and Authorization
(host access control, SELinux user roles, services). The solution provides
features for further integration with Linux based clients (SUDO, automount)
and integration with Active Directory based infrastructures (Trusts).
If you are installing an IPA server, you need to install this package.


%package -n python3-ipaserver
Summary: Python libraries used by IPA server
Group: System Environment/Libraries
BuildArch: noarch
%{?python_provide:%python_provide python3-ipaserver}
Requires: %{name}-server-common = %{version}-%{release}
Requires: %{name}-common = %{version}-%{release}
# we need pre-requires since earlier versions may break upgrade
Requires(pre): python3-ldap >= %{python_ldap_version}
Requires: python3-augeas
Requires: python3-custodia >= 0.3.1
Requires: python3-dbus
Requires: python3-dns >= 1.15
Requires: python3-gssapi >= 1.2.0
Requires: python3-ipaclient = %{version}-%{release}
Requires: python3-kdcproxy >= 0.3
Requires: python3-lxml
Requires: python3-pki >= %{pki_version}
Requires: python3-pyasn1 >= 0.3.2-2
Requires: python3-sssdconfig >= %{sssd_version}
Requires: python3-psutil
Requires: rpm-libs
# Indirect dependency: use newer urllib3 with TLS 1.3 PHA support
%if 0%{?rhel}
Requires: python3-urllib3 >= 1.24.2-3
%else
Requires: python3-urllib3 >= 1.25.7
%endif


%description -n python3-ipaserver
IPA is an integrated solution to provide centrally managed Identity (users,
hosts, services), Authentication (SSO, 2FA), and Authorization
(host access control, SELinux user roles, services). The solution provides
features for further integration with Linux based clients (SUDO, automount)
and integration with Active Directory based infrastructures (Trusts).
If you are installing an IPA server, you need to install this package.


%package server-common
Summary: Common files used by IPA server
Group: System Environment/Base
BuildArch: noarch
Requires: %{name}-client-common = %{version}-%{release}
Requires: httpd >= %{httpd_version}
Requires: systemd-units >= %{systemd_version}

Provides: %{alt_name}-server-common = %{version}
Conflicts: %{alt_name}-server-common
Obsoletes: %{alt_name}-server-common < %{version}

%description server-common
IPA is an integrated solution to provide centrally managed Identity (users,
hosts, services), Authentication (SSO, 2FA), and Authorization
(host access control, SELinux user roles, services). The solution provides
features for further integration with Linux based clients (SUDO, automount)
and integration with Active Directory based infrastructures (Trusts).
If you are installing an IPA server, you need to install this package.


%package server-dns
Summary: IPA integrated DNS server with support for automatic DNSSEC signing
Group: System Environment/Base
BuildArch: noarch
Requires: %{name}-server = %{version}-%{release}
Requires: bind-dyndb-ldap >= 11.0-2
Requires: bind >= 9.11.0-6.P2
Requires: bind-utils >= 9.11.0-6.P2
Requires: bind-pkcs11 >= 9.11.0-6.P2
Requires: bind-pkcs11-utils >= 9.11.0-6.P2
%if 0%{?fedora} >= 32
# See https://bugzilla.redhat.com/show_bug.cgi?id=1825812
Requires: opendnssec >= 2.1.6-5
%else
Requires: opendnssec >= 1.4.6-4
%endif
%{?systemd_requires}

Provides: %{alt_name}-server-dns = %{version}
Conflicts: %{alt_name}-server-dns
Obsoletes: %{alt_name}-server-dns < %{version}

# upgrade path from monolithic -server to -server + -server-dns
Obsoletes: %{name}-server <= 4.2.0

%description server-dns
IPA integrated DNS server with support for automatic DNSSEC signing.
Integrated DNS server is BIND 9. OpenDNSSEC provides key management.


%package server-trust-ad
Summary: Virtual package to install packages required for Active Directory trusts
Group: System Environment/Base
Requires: %{name}-server = %{version}-%{release}
Requires: %{name}-common = %{version}-%{release}

Requires: samba >= %{samba_version}
Requires: samba-winbind
Requires: libsss_idmap

Requires(post): python3
Requires: python3-samba
Requires: python3-libsss_nss_idmap
Requires: python3-sss

# We use alternatives to divert winbind_krb5_locator.so plugin to libkrb5
# on the installes where server-trust-ad subpackage is installed because
# IPA AD trusts cannot be used at the same time with the locator plugin
# since Winbindd will be configured in a different mode
Requires(post): %{_sbindir}/update-alternatives
Requires(postun): %{_sbindir}/update-alternatives
Requires(preun): %{_sbindir}/update-alternatives

Provides: %{alt_name}-server-trust-ad = %{version}
Conflicts: %{alt_name}-server-trust-ad
Obsoletes: %{alt_name}-server-trust-ad < %{version}

%description server-trust-ad
Cross-realm trusts with Active Directory in IPA require working Samba 4
installation. This package is provided for convenience to install all required
dependencies at once.

# ONLY_CLIENT
%endif


%package client
Summary: IPA authentication for use on clients
Group: System Environment/Base
Requires: %{name}-client-common = %{version}-%{release}
Requires: %{name}-common = %{version}-%{release}
Requires: python3-gssapi >= 1.2.0-5
Requires: python3-ipaclient = %{version}-%{release}
Requires: python3-ldap >= %{python_ldap_version}
Requires: python3-sssdconfig >= %{sssd_version}
Requires: cyrus-sasl-gssapi%{?_isa}
Requires: chrony
Requires: krb5-workstation >= %{krb5_version}
Requires: authselect >= 0.4-2
Requires: curl
# NIS domain name config: /usr/lib/systemd/system/*-domainname.service
%if 0%{?fedora} >= 29
Requires: hostname
%else
Requires: initscripts
%endif
Requires: libcurl >= 7.21.7-2
Requires: xmlrpc-c >= 1.27.4
Requires: sssd-ipa >= %{sssd_version}
Requires: certmonger >= %{certmonger_version}
Requires: nss-tools >= %{nss_version}
Requires: bind-utils
Requires: oddjob-mkhomedir
Requires: libsss_autofs
Requires: autofs
Requires: libnfsidmap
Requires: nfs-utils
Requires: sssd-tools >= %{sssd_version}
Requires(post): policycoreutils

Provides: %{alt_name}-client = %{version}
Conflicts: %{alt_name}-client
Obsoletes: %{alt_name}-client < %{version}

Provides: %{alt_name}-admintools = %{version}
Conflicts: %{alt_name}-admintools
Obsoletes: %{alt_name}-admintools < 4.4.1

Obsoletes: %{name}-admintools < 4.4.1
Provides: %{name}-admintools = %{version}-%{release}

%description client
IPA is an integrated solution to provide centrally managed Identity (users,
hosts, services), Authentication (SSO, 2FA), and Authorization
(host access control, SELinux user roles, services). The solution provides
features for further integration with Linux based clients (SUDO, automount)
and integration with Active Directory based infrastructures (Trusts).
If your network uses IPA for authentication, this package should be
installed on every client machine.
This package provides command-line tools for IPA administrators.

%package client-samba
Summary: Tools to configure Samba on IPA client
Group: System Environment/Base
Requires: %{name}-client = %{version}-%{release}
Requires: python3-samba
Requires: samba-client
Requires: samba-winbind
Requires: samba-common-tools
Requires: samba
Requires: sssd-winbind-idmap
Requires: tdb-tools
Requires: cifs-utils

%description client-samba
This package provides command-line tools to deploy Samba domain member
on the machine enrolled into a FreeIPA environment

%package client-epn
Summary: Tools to configure Expiring Password Notification in IPA
Group: System Environment/Base
Requires: systemd-units >= %{systemd_version}
Requires(post): systemd-units >= %{systemd_version}
Requires(preun): systemd-units >= %{systemd_version}
Requires(postun): systemd-units >= %{systemd_version}
Requires: %{name}-client = %{version}-%{release}

%description client-epn
This package provides a service to collect and send expiring password
notifications via email (SMTP).

%package -n python3-ipaclient
Summary: Python libraries used by IPA client
Group: System Environment/Libraries
BuildArch: noarch
%{?python_provide:%python_provide python3-ipaclient}
Requires: %{name}-client-common = %{version}-%{release}
Requires: %{name}-common = %{version}-%{release}
Requires: python3-ipalib = %{version}-%{release}
Requires: python3-augeas
Requires: python3-dns >= 1.15
Requires: python3-jinja2

%description -n python3-ipaclient
IPA is an integrated solution to provide centrally managed Identity (users,
hosts, services), Authentication (SSO, 2FA), and Authorization
(host access control, SELinux user roles, services). The solution provides
features for further integration with Linux based clients (SUDO, automount)
and integration with Active Directory based infrastructures (Trusts).
If your network uses IPA for authentication, this package should be
installed on every client machine.


%package client-common
Summary: Common files used by IPA client
Group: System Environment/Base
BuildArch: noarch

Provides: %{alt_name}-client-common = %{version}
Conflicts: %{alt_name}-client-common
Obsoletes: %{alt_name}-client-common < %{version}
# python2-ipa* packages are no longer available in 4.8.
Obsoletes: python2-ipaclient < 4.8.0-1
Obsoletes: python2-ipalib < 4.8.0-1
Obsoletes: python2-ipaserver < 4.8.0-1
Obsoletes: python2-ipatests < 4.8.0-1


%description client-common
IPA is an integrated solution to provide centrally managed Identity (users,
hosts, services), Authentication (SSO, 2FA), and Authorization
(host access control, SELinux user roles, services). The solution provides
features for further integration with Linux based clients (SUDO, automount)
and integration with Active Directory based infrastructures (Trusts).
If your network uses IPA for authentication, this package should be
installed on every client machine.


%package python-compat
Summary: Compatiblity package for Python libraries used by IPA
Group: System Environment/Libraries
BuildArch: noarch
Obsoletes: %{name}-python < 4.2.91
Provides: %{name}-python = %{version}-%{release}
Requires: %{name}-common = %{version}-%{release}
Requires: python3-ipalib = %{version}-%{release}

Provides: %{alt_name}-python-compat = %{version}
Conflicts: %{alt_name}-python-compat
Obsoletes: %{alt_name}-python-compat < %{version}

Obsoletes: %{alt_name}-python < 4.2.91
Provides: %{alt_name}-python = %{version}

%description python-compat
IPA is an integrated solution to provide centrally managed Identity (users,
hosts, services), Authentication (SSO, 2FA), and Authorization
(host access control, SELinux user roles, services). The solution provides
features for further integration with Linux based clients (SUDO, automount)
and integration with Active Directory based infrastructures (Trusts).
This is a compatibility package to accommodate %{name}-python split into
python3-ipalib and %{name}-common. Packages still depending on
%{name}-python should be fixed to depend on python2-ipaclient or
%{name}-common instead.


%package -n python3-ipalib
Summary: Python3 libraries used by IPA
Group: System Environment/Libraries
BuildArch: noarch
%{?python_provide:%python_provide python3-ipalib}
Provides: python3-ipapython = %{version}-%{release}
%{?python_provide:%python_provide python3-ipapython}
Provides: python3-ipaplatform = %{version}-%{release}
%{?python_provide:%python_provide python3-ipaplatform}
Requires: %{name}-common = %{version}-%{release}
# we need pre-requires since earlier versions may break upgrade
Requires(pre): python3-ldap >= %{python_ldap_version}
Requires: gnupg2
Requires: keyutils
Requires: python3-cffi
Requires: python3-cryptography >= 1.6
Requires: python3-dateutil
Requires: python3-dbus
Requires: python3-dns >= 1.15
Requires: python3-gssapi >= 1.2.0
Requires: python3-jwcrypto >= 0.4.2
Requires: python3-libipa_hbac
Requires: python3-netaddr >= %{python_netaddr_version}
Requires: python3-netifaces >= 0.10.4
Requires: python3-pyasn1 >= 0.3.2-2
Requires: python3-pyasn1-modules >= 0.3.2-2
Requires: python3-pyusb
Requires: python3-qrcode-core >= 5.0.0
Requires: python3-requests
Requires: python3-setuptools
Requires: python3-six
Requires: python3-sss-murmur
Requires: python3-yubico >= 1.3.2-7

%description -n python3-ipalib
IPA is an integrated solution to provide centrally managed Identity (users,
hosts, services), Authentication (SSO, 2FA), and Authorization
(host access control, SELinux user roles, services). The solution provides
features for further integration with Linux based clients (SUDO, automount)
and integration with Active Directory based infrastructures (Trusts).
If you are using IPA with Python 3, you need to install this package.


%package common
Summary: Common files used by IPA
Group: System Environment/Libraries
BuildArch: noarch
Conflicts: %{name}-python < 4.2.91

Provides: %{alt_name}-common = %{version}
Conflicts: %{alt_name}-common
Obsoletes: %{alt_name}-common < %{version}

Conflicts: %{alt_name}-python < %{version}

%if 0%{?with_selinux}
# This ensures that the *-selinux package and all it’s dependencies are not
# pulled into containers and other systems that do not use SELinux. The
# policy defines types and file contexts for client and server.
Requires:       (%{name}-selinux if selinux-policy-%{selinuxtype})
%endif

%description common
IPA is an integrated solution to provide centrally managed Identity (users,
hosts, services), Authentication (SSO, 2FA), and Authorization
(host access control, SELinux user roles, services). The solution provides
features for further integration with Linux based clients (SUDO, automount)
and integration with Active Directory based infrastructures (Trusts).
If you are using IPA, you need to install this package.


%if 0%{?with_ipatests}

%package -n python3-ipatests
Summary: IPA tests and test tools
BuildArch: noarch
%{?python_provide:%python_provide python3-ipatests}
Requires: python3-ipaclient = %{version}-%{release}
Requires: python3-ipaserver = %{version}-%{release}
Requires: iptables
Requires: ldns-utils
Requires: crypto-policies-scripts
Requires: python3-coverage
Requires: python3-cryptography >= 1.6
Requires: python3-pexpect
Requires: python3-polib
Requires: python3-pytest >= 3.9.1
Requires: python3-pytest-multihost >= 0.5
Requires: python3-pytest-sourceorder
Requires: python3-sssdconfig >= %{sssd_version}
Requires: tar
Requires: xz
Requires: openssh-clients
Requires: sshpass

%description -n python3-ipatests
IPA is an integrated solution to provide centrally managed Identity (users,
hosts, services), Authentication (SSO, 2FA), and Authorization
(host access control, SELinux user roles, services). The solution provides
features for further integration with Linux based clients (SUDO, automount)
and integration with Active Directory based infrastructures (Trusts).
This package contains tests that verify IPA functionality under Python 3.

# with_ipatests
%endif

%if 0%{?with_selinux}
# SELinux subpackage
%package selinux
Summary:             FreeIPA SELinux policy
BuildArch:           noarch
Requires:            %{name}-server = %{version}-%{release}
Requires:            selinux-policy-%{selinuxtype}
Requires(post):      selinux-policy-%{selinuxtype}
%{?selinux_requires}

%description selinux
Custom SELinux policy module
# with_selinux
%endif

%prep
%setup -n freeipa-%{version} -q

%build
# PATH is workaround for https://bugzilla.redhat.com/show_bug.cgi?id=1005235
export PATH=/usr/bin:/usr/sbin:$PATH


export PYTHON=%{__python3}
autoreconf -ivf
%configure --with-vendor-suffix=-%{release} \
           %{enable_server_option} \
           %{with_ipatests_option} \
           %{linter_options}

# run build in default dir
# -Onone is workaround for https://bugzilla.redhat.com/show_bug.cgi?id=1398405
%make_build -Onone


%check
make %{?_smp_mflags} check VERBOSE=yes LIBDIR=%{_libdir}


%install
# Please put as much logic as possible into make install. It allows:
# - easier porting to other distributions
# - rapid devel & install cycle using make install
#   (instead of full RPM build and installation each time)
#
# All files and directories created by spec install should be marked as ghost.
# (These are typically configuration files created by IPA installer.)
# All other artifacts should be created by make install.

%make_install

%if 0%{?with_ipatests}
mv %{buildroot}%{_bindir}/ipa-run-tests %{buildroot}%{_bindir}/ipa-run-tests-%{python3_version}
mv %{buildroot}%{_bindir}/ipa-test-config %{buildroot}%{_bindir}/ipa-test-config-%{python3_version}
mv %{buildroot}%{_bindir}/ipa-test-task %{buildroot}%{_bindir}/ipa-test-task-%{python3_version}
ln -rs %{buildroot}%{_bindir}/ipa-run-tests-%{python3_version} %{buildroot}%{_bindir}/ipa-run-tests-3
ln -rs %{buildroot}%{_bindir}/ipa-test-config-%{python3_version} %{buildroot}%{_bindir}/ipa-test-config-3
ln -rs %{buildroot}%{_bindir}/ipa-test-task-%{python3_version} %{buildroot}%{_bindir}/ipa-test-task-3
ln -frs %{buildroot}%{_bindir}/ipa-run-tests-%{python3_version} %{buildroot}%{_bindir}/ipa-run-tests
ln -frs %{buildroot}%{_bindir}/ipa-test-config-%{python3_version} %{buildroot}%{_bindir}/ipa-test-config
ln -frs %{buildroot}%{_bindir}/ipa-test-task-%{python3_version} %{buildroot}%{_bindir}/ipa-test-task
# with_ipatests
%endif

# remove files which are useful only for make uninstall
find %{buildroot} -wholename '*/site-packages/*/install_files.txt' -exec rm {} \;

%find_lang %{gettext_domain}

%if ! %{ONLY_CLIENT}
# Remove .la files from libtool - we don't want to package
# these files
rm %{buildroot}/%{plugin_dir}/libipa_pwd_extop.la
rm %{buildroot}/%{plugin_dir}/libipa_enrollment_extop.la
rm %{buildroot}/%{plugin_dir}/libipa_winsync.la
rm %{buildroot}/%{plugin_dir}/libipa_repl_version.la
rm %{buildroot}/%{plugin_dir}/libipa_uuid.la
rm %{buildroot}/%{plugin_dir}/libipa_modrdn.la
rm %{buildroot}/%{plugin_dir}/libipa_lockout.la
rm %{buildroot}/%{plugin_dir}/libipa_cldap.la
rm %{buildroot}/%{plugin_dir}/libipa_dns.la
rm %{buildroot}/%{plugin_dir}/libipa_sidgen.la
rm %{buildroot}/%{plugin_dir}/libipa_sidgen_task.la
rm %{buildroot}/%{plugin_dir}/libipa_extdom_extop.la
rm %{buildroot}/%{plugin_dir}/libipa_range_check.la
rm %{buildroot}/%{plugin_dir}/libipa_otp_counter.la
rm %{buildroot}/%{plugin_dir}/libipa_otp_lasttoken.la
rm %{buildroot}/%{plugin_dir}/libtopology.la
rm %{buildroot}/%{_libdir}/krb5/plugins/kdb/ipadb.la
rm %{buildroot}/%{_libdir}/samba/pdb/ipasam.la

# So we can own our Apache configuration
mkdir -p %{buildroot}%{_sysconfdir}/httpd/conf.d/
/bin/touch %{buildroot}%{_sysconfdir}/httpd/conf.d/ipa.conf
/bin/touch %{buildroot}%{_sysconfdir}/httpd/conf.d/ipa-kdc-proxy.conf
/bin/touch %{buildroot}%{_sysconfdir}/httpd/conf.d/ipa-pki-proxy.conf
/bin/touch %{buildroot}%{_sysconfdir}/httpd/conf.d/ipa-rewrite.conf
/bin/touch %{buildroot}%{_usr}/share/ipa/html/ca.crt
/bin/touch %{buildroot}%{_usr}/share/ipa/html/krb.con
/bin/touch %{buildroot}%{_usr}/share/ipa/html/krb5.ini
/bin/touch %{buildroot}%{_usr}/share/ipa/html/krbrealm.con

mkdir -p %{buildroot}%{_libdir}/krb5/plugins/libkrb5
touch %{buildroot}%{_libdir}/krb5/plugins/libkrb5/winbind_krb5_locator.so

# ONLY_CLIENT
%endif

/bin/touch %{buildroot}%{_sysconfdir}/ipa/default.conf
/bin/touch %{buildroot}%{_sysconfdir}/ipa/ca.crt

%if ! %{ONLY_CLIENT}
mkdir -p %{buildroot}%{_sysconfdir}/cron.d
# ONLY_CLIENT
%endif

%clean
rm -rf %{buildroot}


%if ! %{ONLY_CLIENT}

%post server
# NOTE: systemd specific section
    /bin/systemctl --system daemon-reload 2>&1 || :
# END
if [ $1 -gt 1 ] ; then
    /bin/systemctl condrestart certmonger.service 2>&1 || :
fi
/bin/systemctl reload-or-try-restart dbus
/bin/systemctl reload-or-try-restart oddjobd

%tmpfiles_create ipa.conf

%posttrans server
# don't execute upgrade and restart of IPA when server is not installed
%{__python3} -c "import sys; from ipalib import facts; sys.exit(0 if facts.is_ipa_configured() else 1);" > /dev/null 2>&1

if [  $? -eq 0 ]; then
    # This is necessary for Fedora system upgrades which by default
    # work with the network being offline
    /bin/systemctl start network-online.target

    # Restart IPA processes. This must be also run in postrans so that plugins
    # and software is in consistent state. This will also perform the
    # system upgrade.
    # NOTE: systemd specific section

    /bin/systemctl is-enabled ipa.service >/dev/null 2>&1
    if [  $? -eq 0 ]; then
        /bin/systemctl restart ipa.service >/dev/null
    fi
fi
# END


%preun server
if [ $1 = 0 ]; then
# NOTE: systemd specific section
    /bin/systemctl --quiet stop ipa.service || :
    /bin/systemctl --quiet disable ipa.service || :
    /bin/systemctl reload-or-try-restart dbus
    /bin/systemctl reload-or-try-restart oddjobd
# END
fi


%pre server
# Stop ipa_kpasswd if it exists before upgrading so we don't have a
# zombie process when we're done.
if [ -e /usr/sbin/ipa_kpasswd ]; then
# NOTE: systemd specific section
    /bin/systemctl stop ipa_kpasswd.service >/dev/null 2>&1 || :
# END
fi


%pre server-common
# create users and groups
# create kdcproxy group and user
getent group kdcproxy >/dev/null || groupadd -f -r kdcproxy
getent passwd kdcproxy >/dev/null || useradd -r -g kdcproxy -s /sbin/nologin -d / -c "IPA KDC Proxy User" kdcproxy
# create ipaapi group and user
getent group ipaapi >/dev/null || groupadd -f -r ipaapi
getent passwd ipaapi >/dev/null || useradd -r -g ipaapi -s /sbin/nologin -d / -c "IPA Framework User" ipaapi
# add apache to ipaaapi group
id -Gn apache | grep '\bipaapi\b' >/dev/null || usermod apache -a -G ipaapi


%post server-dns
%systemd_post ipa-dnskeysyncd.service ipa-ods-exporter.socket ipa-ods-exporter.service

%preun server-dns
%systemd_preun ipa-dnskeysyncd.service ipa-ods-exporter.socket ipa-ods-exporter.service

%postun server-dns
%systemd_postun ipa-dnskeysyncd.service ipa-ods-exporter.socket ipa-ods-exporter.service


%postun server-trust-ad
if [ "$1" -ge "1" ]; then
    if [ "`readlink %{_sysconfdir}/alternatives/winbind_krb5_locator.so`" == "/dev/null" ]; then
        %{_sbindir}/alternatives --set winbind_krb5_locator.so /dev/null
    fi
fi


%post server-trust-ad
%{_sbindir}/update-alternatives --install %{_libdir}/krb5/plugins/libkrb5/winbind_krb5_locator.so \
        winbind_krb5_locator.so /dev/null 90
/bin/systemctl reload-or-try-restart dbus
/bin/systemctl reload-or-try-restart oddjobd


%posttrans server-trust-ad
%{__python3} -c "import sys; from ipalib import facts; sys.exit(0 if facts.is_ipa_configured() else 1);" > /dev/null 2>&1
if [  $? -eq 0 ]; then
# NOTE: systemd specific section
    /bin/systemctl try-restart httpd.service >/dev/null 2>&1 || :
# END
fi


%preun server-trust-ad
if [ $1 -eq 0 ]; then
    %{_sbindir}/update-alternatives --remove winbind_krb5_locator.so /dev/null
    /bin/systemctl reload-or-try-restart dbus
    /bin/systemctl reload-or-try-restart oddjobd
fi

# ONLY_CLIENT
%endif

%preun client-epn
%systemd_preun ipa-epn.service
%systemd_preun ipa-epn.timer

%postun client-epn
%systemd_postun ipa-epn.service
%systemd_postun ipa-epn.timer

%post client-epn
%systemd_post ipa-epn.service
%systemd_post ipa-epn.timer

%post client
if [ $1 -gt 1 ] ; then
    # Has the client been configured?
    restore=0
    test -f '/var/lib/ipa-client/sysrestore/sysrestore.index' && restore=$(wc -l '/var/lib/ipa-client/sysrestore/sysrestore.index' | awk '{print $1}')

    if [ -f '/etc/sssd/sssd.conf' -a $restore -ge 2 ]; then
        if ! grep -E -q '/var/lib/sss/pubconf/krb5.include.d/' /etc/krb5.conf  2>/dev/null ; then
            echo "includedir /var/lib/sss/pubconf/krb5.include.d/" > /etc/krb5.conf.ipanew
            cat /etc/krb5.conf >> /etc/krb5.conf.ipanew
            mv -Z /etc/krb5.conf.ipanew /etc/krb5.conf
        fi
    fi

    if [ $restore -ge 2 ]; then
        if grep -E -q '\s*pkinit_anchors = FILE:/etc/ipa/ca.crt$' /etc/krb5.conf 2>/dev/null; then
            sed -E 's|(\s*)pkinit_anchors = FILE:/etc/ipa/ca.crt$|\1pkinit_anchors = FILE:/var/lib/ipa-client/pki/kdc-ca-bundle.pem\n\1pkinit_pool = FILE:/var/lib/ipa-client/pki/ca-bundle.pem|' /etc/krb5.conf >/etc/krb5.conf.ipanew
            mv -Z /etc/krb5.conf.ipanew /etc/krb5.conf
            cp /etc/ipa/ca.crt /var/lib/ipa-client/pki/kdc-ca-bundle.pem
            cp /etc/ipa/ca.crt /var/lib/ipa-client/pki/ca-bundle.pem
        fi

        %{__python3} -c 'from ipaclient.install.client import configure_krb5_snippet; configure_krb5_snippet()' >>/var/log/ipaupgrade.log 2>&1
        %{__python3} -c 'from ipaclient.install.client import update_ipa_nssdb; update_ipa_nssdb()' >>/var/log/ipaupgrade.log 2>&1
        SSH_CLIENT_SYSTEM_CONF="/etc/ssh/ssh_config"
        if [ -f "$SSH_CLIENT_SYSTEM_CONF" ]; then
            sed -E --in-place=.orig 's/^(HostKeyAlgorithms ssh-rsa,ssh-dss)$/# disabled by ipa-client update\n# \1/' "$SSH_CLIENT_SYSTEM_CONF"
        fi
    fi
fi


%if 0%{?with_selinux}
# SELinux contexts are saved so that only affected files can be
# relabeled after the policy module installation
%pre selinux
%selinux_relabel_pre -s %{selinuxtype}

%post selinux
semodule -d ipa_custodia &> /dev/null || true;
%selinux_modules_install -s %{selinuxtype} %{_datadir}/selinux/packages/%{selinuxtype}/%{modulename}.pp.bz2

%postun selinux
if [ $1 -eq 0 ]; then
    %selinux_modules_uninstall -s %{selinuxtype} %{modulename}
    semodule -e ipa_custodia &> /dev/null || true;
fi

%posttrans selinux
%selinux_relabel_post -s %{selinuxtype}
# with_selinux
%endif


%triggerin client -- openssh-server < 8.2
# Has the client been configured?
restore=0
test -f '/var/lib/ipa-client/sysrestore/sysrestore.index' && restore=$(wc -l '/var/lib/ipa-client/sysrestore/sysrestore.index' | awk '{print $1}')

if [ -f '/etc/ssh/sshd_config' -a $restore -ge 2 ]; then
    if grep -E -q '^(AuthorizedKeysCommand /usr/bin/sss_ssh_authorizedkeys|PubKeyAgent /usr/bin/sss_ssh_authorizedkeys %u)$' /etc/ssh/sshd_config 2>/dev/null; then
        sed -r '
            /^(AuthorizedKeysCommand(User|RunAs)|PubKeyAgentRunAs)[ \t]/ d
        ' /etc/ssh/sshd_config >/etc/ssh/sshd_config.ipanew

        if /usr/sbin/sshd -t -f /dev/null -o 'AuthorizedKeysCommand=/usr/bin/sss_ssh_authorizedkeys' -o 'AuthorizedKeysCommandUser=nobody' 2>/dev/null; then
            sed -ri '
                s/^PubKeyAgent (.+) %u$/AuthorizedKeysCommand \1/
                s/^AuthorizedKeysCommand .*$/\0\nAuthorizedKeysCommandUser nobody/
            ' /etc/ssh/sshd_config.ipanew
        elif /usr/sbin/sshd -t -f /dev/null -o 'AuthorizedKeysCommand=/usr/bin/sss_ssh_authorizedkeys' -o 'AuthorizedKeysCommandRunAs=nobody' 2>/dev/null; then
            sed -ri '
                s/^PubKeyAgent (.+) %u$/AuthorizedKeysCommand \1/
                s/^AuthorizedKeysCommand .*$/\0\nAuthorizedKeysCommandRunAs nobody/
            ' /etc/ssh/sshd_config.ipanew
        elif /usr/sbin/sshd -t -f /dev/null -o 'PubKeyAgent=/usr/bin/sss_ssh_authorizedkeys %u' -o 'PubKeyAgentRunAs=nobody' 2>/dev/null; then
            sed -ri '
                s/^AuthorizedKeysCommand (.+)$/PubKeyAgent \1 %u/
                s/^PubKeyAgent .*$/\0\nPubKeyAgentRunAs nobody/
            ' /etc/ssh/sshd_config.ipanew
        fi

        mv -Z /etc/ssh/sshd_config.ipanew /etc/ssh/sshd_config
        chmod 600 /etc/ssh/sshd_config

        /bin/systemctl condrestart sshd.service 2>&1 || :
    fi
fi


%triggerin client -- openssh-server >= 8.2
# Has the client been configured?
restore=0
test -f '/var/lib/ipa-client/sysrestore/sysrestore.index' && restore=$(wc -l '/var/lib/ipa-client/sysrestore/sysrestore.index' | awk '{print $1}')

if [ -f '/etc/ssh/sshd_config' -a $restore -ge 2 ]; then
    # If the snippet already exists, skip
    if [ ! -f '/etc/ssh/sshd_config.d/04-ipa.conf' ]; then
        # Take the values from /etc/ssh/sshd_config and put them in 04-ipa.conf
        grep -E '^(PubkeyAuthentication|KerberosAuthentication|GSSAPIAuthentication|UsePAM|ChallengeResponseAuthentication|AuthorizedKeysCommand|AuthorizedKeysCommandUser)' /etc/ssh/sshd_config 2>/dev/null > /etc/ssh/sshd_config.d/04-ipa.conf
        # Remove the values from sshd_conf
        sed -ri '
            /^(PubkeyAuthentication|KerberosAuthentication|GSSAPIAuthentication|UsePAM|ChallengeResponseAuthentication|AuthorizedKeysCommand|AuthorizedKeysCommandUser)[ \t]/ d
        ' /etc/ssh/sshd_config

        /bin/systemctl condrestart sshd.service 2>&1 || :
    fi
    # If the snippet has been created, ensure that it is included
    # either by /etc/ssh/sshd_config.d/*.conf or directly
    if [ -f '/etc/ssh/sshd_config.d/04-ipa.conf' ]; then
        if ! grep -E -q  '^\s*Include\s*/etc/ssh/sshd_config.d/\*\.conf' /etc/ssh/sshd_config 2> /dev/null ; then
            if ! grep -E -q '^\s*Include\s*/etc/ssh/sshd_config.d/04-ipa\.conf' /etc/ssh/sshd_config 2> /dev/null ; then
                # Include the snippet
                echo "Include /etc/ssh/sshd_config.d/04-ipa.conf" > /etc/ssh/sshd_config.ipanew
                cat /etc/ssh/sshd_config >> /etc/ssh/sshd_config.ipanew
                mv -fZ --backup=existing --suffix .ipaold /etc/ssh/sshd_config.ipanew /etc/ssh/sshd_config
            fi
        fi
    fi
fi


%if ! %{ONLY_CLIENT}

%files server
%doc README.md Contributors.txt
%license COPYING
%{_sbindir}/ipa-backup
%{_sbindir}/ipa-restore
%{_sbindir}/ipa-ca-install
%{_sbindir}/ipa-kra-install
%{_sbindir}/ipa-server-install
%{_sbindir}/ipa-replica-conncheck
%{_sbindir}/ipa-replica-install
%{_sbindir}/ipa-replica-manage
%{_sbindir}/ipa-csreplica-manage
%{_sbindir}/ipa-server-certinstall
%{_sbindir}/ipa-server-upgrade
%{_sbindir}/ipa-ldap-updater
%{_sbindir}/ipa-otptoken-import
%{_sbindir}/ipa-compat-manage
%{_sbindir}/ipa-nis-manage
%{_sbindir}/ipa-managed-entries
%{_sbindir}/ipactl
%{_sbindir}/ipa-advise
%{_sbindir}/ipa-cacert-manage
%{_sbindir}/ipa-winsync-migrate
%{_sbindir}/ipa-pkinit-manage
%{_sbindir}/ipa-crlgen-manage
%{_sbindir}/ipa-cert-fix
%{_libexecdir}/certmonger/dogtag-ipa-ca-renew-agent-submit
%{_libexecdir}/certmonger/ipa-server-guard
%dir %{_libexecdir}/ipa
%{_libexecdir}/ipa/ipa-custodia
%{_libexecdir}/ipa/ipa-custodia-check
%{_libexecdir}/ipa/ipa-httpd-kdcproxy
%{_libexecdir}/ipa/ipa-httpd-pwdreader
%{_libexecdir}/ipa/ipa-pki-retrieve-key
%{_libexecdir}/ipa/ipa-pki-wait-running
%{_libexecdir}/ipa/ipa-otpd
%{_libexecdir}/ipa/ipa-print-pac
%dir %{_libexecdir}/ipa/custodia
%attr(755,root,root) %{_libexecdir}/ipa/custodia/ipa-custodia-dmldap
%attr(755,root,root) %{_libexecdir}/ipa/custodia/ipa-custodia-pki-tomcat
%attr(755,root,root) %{_libexecdir}/ipa/custodia/ipa-custodia-pki-tomcat-wrapped
%attr(755,root,root) %{_libexecdir}/ipa/custodia/ipa-custodia-ra-agent
%dir %{_libexecdir}/ipa/oddjob
%attr(0755,root,root) %{_libexecdir}/ipa/oddjob/org.freeipa.server.conncheck
%attr(0755,root,root) %{_libexecdir}/ipa/oddjob/org.freeipa.server.trust-enable-agent
%config(noreplace) %{_sysconfdir}/dbus-1/system.d/org.freeipa.server.conf
%config(noreplace) %{_sysconfdir}/oddjobd.conf.d/ipa-server.conf
%dir %{_libexecdir}/ipa/certmonger
%attr(755,root,root) %{_libexecdir}/ipa/certmonger/*
# NOTE: systemd specific section
%attr(644,root,root) %{_unitdir}/ipa.service
%attr(644,root,root) %{_unitdir}/ipa-otpd.socket
%attr(644,root,root) %{_unitdir}/ipa-otpd@.service
# END
%attr(755,root,root) %{plugin_dir}/libipa_pwd_extop.so
%attr(755,root,root) %{plugin_dir}/libipa_enrollment_extop.so
%attr(755,root,root) %{plugin_dir}/libipa_winsync.so
%attr(755,root,root) %{plugin_dir}/libipa_repl_version.so
%attr(755,root,root) %{plugin_dir}/libipa_uuid.so
%attr(755,root,root) %{plugin_dir}/libipa_modrdn.so
%attr(755,root,root) %{plugin_dir}/libipa_lockout.so
%attr(755,root,root) %{plugin_dir}/libipa_dns.so
%attr(755,root,root) %{plugin_dir}/libipa_range_check.so
%attr(755,root,root) %{plugin_dir}/libipa_otp_counter.so
%attr(755,root,root) %{plugin_dir}/libipa_otp_lasttoken.so
%attr(755,root,root) %{plugin_dir}/libtopology.so
%attr(755,root,root) %{plugin_dir}/libipa_sidgen.so
%attr(755,root,root) %{plugin_dir}/libipa_sidgen_task.so
%attr(755,root,root) %{plugin_dir}/libipa_extdom_extop.so
%attr(755,root,root) %{_libdir}/krb5/plugins/kdb/ipadb.so
%{_mandir}/man1/ipa-replica-conncheck.1*
%{_mandir}/man1/ipa-replica-install.1*
%{_mandir}/man1/ipa-replica-manage.1*
%{_mandir}/man1/ipa-csreplica-manage.1*
%{_mandir}/man1/ipa-server-certinstall.1*
%{_mandir}/man1/ipa-server-install.1*
%{_mandir}/man1/ipa-server-upgrade.1*
%{_mandir}/man1/ipa-ca-install.1*
%{_mandir}/man1/ipa-kra-install.1*
%{_mandir}/man1/ipa-compat-manage.1*
%{_mandir}/man1/ipa-nis-manage.1*
%{_mandir}/man1/ipa-managed-entries.1*
%{_mandir}/man1/ipa-ldap-updater.1*
%{_mandir}/man8/ipactl.8*
%{_mandir}/man1/ipa-backup.1*
%{_mandir}/man1/ipa-restore.1*
%{_mandir}/man1/ipa-advise.1*
%{_mandir}/man1/ipa-otptoken-import.1*
%{_mandir}/man1/ipa-cacert-manage.1*
%{_mandir}/man1/ipa-winsync-migrate.1*
%{_mandir}/man1/ipa-pkinit-manage.1*
%{_mandir}/man1/ipa-crlgen-manage.1*
%{_mandir}/man1/ipa-cert-fix.1*


%files -n python3-ipaserver
%doc README.md Contributors.txt
%license COPYING
%{python3_sitelib}/ipaserver
%{python3_sitelib}/ipaserver-*.egg-info


%files server-common
%doc README.md Contributors.txt
%license COPYING
%ghost %verify(not owner group) %dir %{_sharedstatedir}/kdcproxy
%dir %attr(0755,root,root) %{_sysconfdir}/ipa/kdcproxy
%config(noreplace) %{_sysconfdir}/ipa/kdcproxy/kdcproxy.conf
# NOTE: systemd specific section
%{_tmpfilesdir}/ipa.conf
%attr(644,root,root) %{_unitdir}/ipa-custodia.service
%ghost %attr(644,root,root) %{etc_systemd_dir}/httpd.d/ipa.conf
# END
%{_usr}/share/ipa/wsgi.py*
%{_usr}/share/ipa/kdcproxy.wsgi
%{_usr}/share/ipa/ipaca*.ini
%{_usr}/share/ipa/*.ldif
%exclude %{_datadir}/ipa/ipa-cldap-conf.ldif
%{_usr}/share/ipa/*.uldif
%{_usr}/share/ipa/*.template
%dir %{_usr}/share/ipa/advise
%dir %{_usr}/share/ipa/advise/legacy
%{_usr}/share/ipa/advise/legacy/*.template
%dir %{_usr}/share/ipa/profiles
%{_usr}/share/ipa/profiles/README
%{_usr}/share/ipa/profiles/*.cfg
%dir %{_usr}/share/ipa/html
%{_usr}/share/ipa/html/ssbrowser.html
%{_usr}/share/ipa/html/unauthorized.html
%dir %{_usr}/share/ipa/migration
%{_usr}/share/ipa/migration/index.html
%{_usr}/share/ipa/migration/migration.py*
%dir %{_usr}/share/ipa/ui
%{_usr}/share/ipa/ui/index.html
%{_usr}/share/ipa/ui/reset_password.html
%{_usr}/share/ipa/ui/sync_otp.html
%{_usr}/share/ipa/ui/*.ico
%{_usr}/share/ipa/ui/*.css
%dir %{_usr}/share/ipa/ui/css
%{_usr}/share/ipa/ui/css/*.css
%dir %{_usr}/share/ipa/ui/js
%dir %{_usr}/share/ipa/ui/js/dojo
%{_usr}/share/ipa/ui/js/dojo/dojo.js
%dir %{_usr}/share/ipa/ui/js/libs
%{_usr}/share/ipa/ui/js/libs/*.js
%dir %{_usr}/share/ipa/ui/js/freeipa
%{_usr}/share/ipa/ui/js/freeipa/app.js
%{_usr}/share/ipa/ui/js/freeipa/core.js
%dir %{_usr}/share/ipa/ui/js/plugins
%dir %{_usr}/share/ipa/ui/images
%{_usr}/share/ipa/ui/images/*.jpg
%{_usr}/share/ipa/ui/images/*.png
%dir %{_usr}/share/ipa/wsgi
%{_usr}/share/ipa/wsgi/plugins.py*
%dir %{_sysconfdir}/ipa
%dir %{_sysconfdir}/ipa/html
%config(noreplace) %{_sysconfdir}/ipa/html/ssbrowser.html
%config(noreplace) %{_sysconfdir}/ipa/html/unauthorized.html
%ghost %attr(0644,root,root) %config(noreplace) %{_sysconfdir}/httpd/conf.d/ipa-rewrite.conf
%ghost %attr(0644,root,root) %config(noreplace) %{_sysconfdir}/httpd/conf.d/ipa.conf
%ghost %attr(0644,root,root) %config(noreplace) %{_sysconfdir}/httpd/conf.d/ipa-kdc-proxy.conf
%ghost %attr(0640,root,root) %config(noreplace) %{_sysconfdir}/httpd/conf.d/ipa-pki-proxy.conf
%ghost %attr(0644,root,root) %config(noreplace) %{_sysconfdir}/ipa/kdcproxy/ipa-kdc-proxy.conf
%ghost %attr(0644,root,root) %config(noreplace) %{_usr}/share/ipa/html/ca.crt
%ghost %attr(0640,root,named) %config(noreplace) %{_sysconfdir}/named/ipa-ext.conf
%ghost %attr(0640,root,named) %config(noreplace) %{_sysconfdir}/named/ipa-options-ext.conf
%ghost %attr(0644,root,root) %{_usr}/share/ipa/html/krb.con
%ghost %attr(0644,root,root) %{_usr}/share/ipa/html/krb5.ini
%ghost %attr(0644,root,root) %{_usr}/share/ipa/html/krbrealm.con
%dir %{_usr}/share/ipa/updates/
%{_usr}/share/ipa/updates/*
%dir %{_localstatedir}/lib/ipa
%attr(700,root,root) %dir %{_localstatedir}/lib/ipa/backup
%attr(700,root,root) %dir %{_localstatedir}/lib/ipa/gssproxy
%attr(711,root,root) %dir %{_localstatedir}/lib/ipa/sysrestore
%attr(700,root,root) %dir %{_localstatedir}/lib/ipa/sysupgrade
%attr(755,root,root) %dir %{_localstatedir}/lib/ipa/pki-ca
%attr(755,root,root) %dir %{_localstatedir}/lib/ipa/certs
%attr(700,root,root) %dir %{_localstatedir}/lib/ipa/private
%attr(700,root,root) %dir %{_localstatedir}/lib/ipa/passwds
%ghost %attr(775,root,pkiuser) %{_localstatedir}/lib/ipa/pki-ca/publish
%ghost %attr(770,named,named) %{_localstatedir}/named/dyndb-ldap/ipa
%dir %attr(0700,root,root) %{_sysconfdir}/ipa/custodia
%dir %{_usr}/share/ipa/schema.d
%attr(0644,root,root) %{_usr}/share/ipa/schema.d/README
%attr(0644,root,root) %{_usr}/share/ipa/gssapi.login
%{_usr}/share/ipa/ipakrb5.aug

%files server-dns
%doc README.md Contributors.txt
%license COPYING
%config(noreplace) %{_sysconfdir}/sysconfig/ipa-dnskeysyncd
%config(noreplace) %{_sysconfdir}/sysconfig/ipa-ods-exporter
%dir %attr(0755,root,root) %{_sysconfdir}/ipa/dnssec
%{_libexecdir}/ipa/ipa-dnskeysyncd
%{_libexecdir}/ipa/ipa-dnskeysync-replica
%{_libexecdir}/ipa/ipa-ods-exporter
%{_sbindir}/ipa-dns-install
%{_mandir}/man1/ipa-dns-install.1*
%attr(644,root,root) %{_unitdir}/ipa-dnskeysyncd.service
%attr(644,root,root) %{_unitdir}/ipa-ods-exporter.socket
%attr(644,root,root) %{_unitdir}/ipa-ods-exporter.service

%files server-trust-ad
%doc README.md Contributors.txt
%license COPYING
%{_sbindir}/ipa-adtrust-install
%{_usr}/share/ipa/smb.conf.empty
%attr(755,root,root) %{_libdir}/samba/pdb/ipasam.so
%attr(755,root,root) %{plugin_dir}/libipa_cldap.so
%{_datadir}/ipa/ipa-cldap-conf.ldif
%{_mandir}/man1/ipa-adtrust-install.1*
%ghost %{_libdir}/krb5/plugins/libkrb5/winbind_krb5_locator.so
%{_sysconfdir}/dbus-1/system.d/oddjob-ipa-trust.conf
%{_sysconfdir}/oddjobd.conf.d/oddjobd-ipa-trust.conf
%%attr(755,root,root) %{_libexecdir}/ipa/oddjob/com.redhat.idm.trust-fetch-domains

# ONLY_CLIENT
%endif


%files client
%doc README.md Contributors.txt
%license COPYING
%{_sbindir}/ipa-client-install
%{_sbindir}/ipa-client-automount
%{_sbindir}/ipa-certupdate
%{_sbindir}/ipa-getkeytab
%{_sbindir}/ipa-rmkeytab
%{_sbindir}/ipa-join
%{_bindir}/ipa
%config %{_sysconfdir}/bash_completion.d
%config %{_sysconfdir}/sysconfig/certmonger
%{_mandir}/man1/ipa.1*
%{_mandir}/man1/ipa-getkeytab.1*
%{_mandir}/man1/ipa-rmkeytab.1*
%{_mandir}/man1/ipa-client-install.1*
%{_mandir}/man1/ipa-client-automount.1*
%{_mandir}/man1/ipa-certupdate.1*
%{_mandir}/man1/ipa-join.1*

%files client-samba
%doc README.md Contributors.txt
%license COPYING
%{_sbindir}/ipa-client-samba
%{_mandir}/man1/ipa-client-samba.1*


%files client-epn
%doc README.md Contributors.txt
%dir %{_sysconfdir}/ipa/epn
%license COPYING
%{_sbindir}/ipa-epn
%{_mandir}/man1/ipa-epn.1*
%{_mandir}/man5/epn.conf.5*
%attr(644,root,root) %{_unitdir}/ipa-epn.service
%attr(644,root,root) %{_unitdir}/ipa-epn.timer
%attr(600,root,root) %config(noreplace) %{_sysconfdir}/ipa/epn.conf
%attr(644,root,root) %config(noreplace) %{_sysconfdir}/ipa/epn/expire_msg.template

%files -n python3-ipaclient
%doc README.md Contributors.txt
%license COPYING
%dir %{python3_sitelib}/ipaclient
%{python3_sitelib}/ipaclient/*.py
%{python3_sitelib}/ipaclient/__pycache__/*.py*
%dir %{python3_sitelib}/ipaclient/install
%{python3_sitelib}/ipaclient/install/*.py
%{python3_sitelib}/ipaclient/install/__pycache__/*.py*
%dir %{python3_sitelib}/ipaclient/plugins
%{python3_sitelib}/ipaclient/plugins/*.py
%{python3_sitelib}/ipaclient/plugins/__pycache__/*.py*
%dir %{python3_sitelib}/ipaclient/remote_plugins
%{python3_sitelib}/ipaclient/remote_plugins/*.py
%{python3_sitelib}/ipaclient/remote_plugins/__pycache__/*.py*
%dir %{python3_sitelib}/ipaclient/remote_plugins/2_*
%{python3_sitelib}/ipaclient/remote_plugins/2_*/*.py
%{python3_sitelib}/ipaclient/remote_plugins/2_*/__pycache__/*.py*
%dir %{python3_sitelib}/ipaclient/csrgen
%dir %{python3_sitelib}/ipaclient/csrgen/profiles
%{python3_sitelib}/ipaclient/csrgen/profiles/*.json
%dir %{python3_sitelib}/ipaclient/csrgen/rules
%{python3_sitelib}/ipaclient/csrgen/rules/*.json
%dir %{python3_sitelib}/ipaclient/csrgen/templates
%{python3_sitelib}/ipaclient/csrgen/templates/*.tmpl
%{python3_sitelib}/ipaclient-*.egg-info


%files client-common
%doc README.md Contributors.txt
%license COPYING
%dir %attr(0755,root,root) %{_sysconfdir}/ipa/
%ghost %attr(0644,root,root) %config(noreplace) %{_sysconfdir}/ipa/default.conf
%ghost %attr(0644,root,root) %config(noreplace) %{_sysconfdir}/ipa/ca.crt
%dir %attr(0755,root,root) %{_sysconfdir}/ipa/nssdb
# old dbm format
%ghost %attr(644,root,root) %config(noreplace) %{_sysconfdir}/ipa/nssdb/cert8.db
%ghost %attr(644,root,root) %config(noreplace) %{_sysconfdir}/ipa/nssdb/key3.db
%ghost %attr(644,root,root) %config(noreplace) %{_sysconfdir}/ipa/nssdb/secmod.db
# new sql format
%ghost %attr(644,root,root) %config(noreplace) %{_sysconfdir}/ipa/nssdb/cert9.db
%ghost %attr(644,root,root) %config(noreplace) %{_sysconfdir}/ipa/nssdb/key4.db
%ghost %attr(644,root,root) %config(noreplace) %{_sysconfdir}/ipa/nssdb/pkcs11.txt
%ghost %attr(600,root,root) %config(noreplace) %{_sysconfdir}/ipa/nssdb/pwdfile.txt
%ghost %attr(644,root,root) %config(noreplace) %{_sysconfdir}/pki/ca-trust/source/ipa.p11-kit
%dir %{_localstatedir}/lib/ipa-client
%dir %{_localstatedir}/lib/ipa-client/pki
%dir %{_localstatedir}/lib/ipa-client/sysrestore
%{_mandir}/man5/default.conf.5*
%dir %{_usr}/share/ipa/client
%{_usr}/share/ipa/client/*.template


%files python-compat
%doc README.md Contributors.txt
%license COPYING


%files common -f %{gettext_domain}.lang
%doc README.md Contributors.txt
%license COPYING
%dir %{_usr}/share/ipa


%files -n python3-ipalib
%doc README.md Contributors.txt
%license COPYING

%{python3_sitelib}/ipapython/
%{python3_sitelib}/ipalib/
%{python3_sitelib}/ipaplatform/
%{python3_sitelib}/ipapython-*.egg-info
%{python3_sitelib}/ipalib-*.egg-info
%{python3_sitelib}/ipaplatform-*.egg-info


%if 0%{?with_ipatests}

%files -n python3-ipatests
%doc README.md Contributors.txt
%license COPYING
%{python3_sitelib}/ipatests
%{python3_sitelib}/ipatests-*.egg-info
%{_bindir}/ipa-run-tests-3
%{_bindir}/ipa-test-config-3
%{_bindir}/ipa-test-task-3
%{_bindir}/ipa-run-tests-%{python3_version}
%{_bindir}/ipa-test-config-%{python3_version}
%{_bindir}/ipa-test-task-%{python3_version}
%{_bindir}/ipa-run-tests
%{_bindir}/ipa-test-config
%{_bindir}/ipa-test-task
%{_mandir}/man1/ipa-run-tests.1*
%{_mandir}/man1/ipa-test-config.1*
%{_mandir}/man1/ipa-test-task.1*

# with_ipatests
%endif

%if 0%{?with_selinux}
%files selinux
%{_datadir}/selinux/packages/%{selinuxtype}/%{modulename}.pp.*
%ghost %{_sharedstatedir}/selinux/%{selinuxtype}/active/modules/200/%{modulename}
# with_selinux
%endif

%changelog
* Tue Nov 26 2013 Petr Viktorin <pviktori@redhat.com> - 4.8.10.dev202110231104+git-
- Remove changelog. The history is kept in Git, downstreams have own logs.
# note, this entry is here to placate tools that expect a non-empty changelog