diff -U2 -r /var/lib/copr-rpmbuild/results/eradio/upstream-unpacked/Source0/eradio-0.0.13/Makefile.in /var/lib/copr-rpmbuild/results/eradio/srpm-unpacked/eradio-0.0.13.tar.gz-extract/eradio-0.0.13/Makefile.in --- /var/lib/copr-rpmbuild/results/eradio/upstream-unpacked/Source0/eradio-0.0.13/Makefile.in 2025-10-17 00:03:47.000000000 +0000 +++ /var/lib/copr-rpmbuild/results/eradio/srpm-unpacked/eradio-0.0.13.tar.gz-extract/eradio-0.0.13/Makefile.in 2025-10-17 00:01:17.000000000 +0000 @@ -1,6 +1,6 @@ -# Makefile.in generated by automake 1.16.5 from Makefile.am. +# Makefile.in generated by automake 1.17 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2021 Free Software Foundation, Inc. +# Copyright (C) 1994-2024 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation @@ -70,4 +70,6 @@ am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +am__rm_f = rm -f $(am__rm_f_notfound) +am__rm_rf = rm -rf $(am__rm_f_notfound) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ @@ -154,5 +156,5 @@ DIST_SUBDIRS = $(SUBDIRS) am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \ - README.md compile install-sh missing + README.md compile depcomp install-sh missing DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) @@ -160,6 +162,6 @@ am__remove_distdir = \ if test -d "$(distdir)"; then \ - find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -rf "$(distdir)" \ + find "$(distdir)" -type d ! -perm -700 -exec chmod u+rwx {} ';' \ + ; rm -rf "$(distdir)" \ || { sleep 5 && rm -rf "$(distdir)"; }; \ else :; fi @@ -191,5 +193,5 @@ reldir="$$dir2" DIST_ARCHIVES = $(distdir).tar.gz -GZIP_ENV = --best +GZIP_ENV = -9 DIST_TARGETS = dist-gzip # Exists only to be overridden by the user if desired. @@ -198,5 +200,7 @@ am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' -distcleancheck_listfiles = find . -type f -print +distcleancheck_listfiles = \ + find . \( -type f -a \! \ + \( -name .nfs* -o -name .smb* -o -name .__afs* \) \) -print ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ @@ -260,6 +264,8 @@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ +am__rm_f_notfound = @am__rm_f_notfound@ am__tar = @am__tar@ am__untar = @am__untar@ +am__xargs_n = @am__xargs_n@ bindir = @bindir@ build_alias = @build_alias@ @@ -340,10 +346,10 @@ stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status - @rm -f stamp-h1 - cd $(top_builddir) && $(SHELL) ./config.status config.h + $(AM_V_at)rm -f stamp-h1 + $(AM_V_GEN)cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: $(am__configure_deps) - ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) - rm -f stamp-h1 - touch $@ + $(AM_V_GEN)($(am__cd) $(top_srcdir) && $(AUTOHEADER)) + $(AM_V_at)rm -f stamp-h1 + $(AM_V_at)touch $@ distclean-hdr: @@ -460,5 +466,5 @@ distdir-am: $(DISTFILES) $(am__remove_distdir) - test -d "$(distdir)" || mkdir "$(distdir)" + $(AM_V_at)$(MKDIR_P) "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ @@ -571,5 +577,5 @@ case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ - eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ + eval GZIP= gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ @@ -581,5 +587,5 @@ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ - eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ + eval GZIP= gzip -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ @@ -681,6 +687,6 @@ distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + -$(am__rm_f) $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @@ -780,2 +786,9 @@ # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: + +# Tell GNU make to disable its built-in pattern rules. +%:: %,v +%:: RCS/%,v +%:: RCS/% +%:: s.% +%:: SCCS/s.% diff -U2 -r /var/lib/copr-rpmbuild/results/eradio/upstream-unpacked/Source0/eradio-0.0.13/aclocal.m4 /var/lib/copr-rpmbuild/results/eradio/srpm-unpacked/eradio-0.0.13.tar.gz-extract/eradio-0.0.13/aclocal.m4 --- /var/lib/copr-rpmbuild/results/eradio/upstream-unpacked/Source0/eradio-0.0.13/aclocal.m4 2025-10-17 00:03:46.000000000 +0000 +++ /var/lib/copr-rpmbuild/results/eradio/srpm-unpacked/eradio-0.0.13.tar.gz-extract/eradio-0.0.13/aclocal.m4 2025-10-17 00:01:16.000000000 +0000 @@ -1,5 +1,5 @@ -# generated automatically by aclocal 1.16.5 -*- Autoconf -*- +# generated automatically by aclocal 1.17 -*- Autoconf -*- -# Copyright (C) 1996-2021 Free Software Foundation, Inc. +# Copyright (C) 1996-2024 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation @@ -15,6 +15,6 @@ m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.71],, -[m4_warning([this file was generated for autoconf 2.71. +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.72],, +[m4_warning([this file was generated for autoconf 2.72. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. @@ -69,6 +69,6 @@ ])dnl PKG_PREREQ -dnl PKG_PROG_PKG_CONFIG([MIN-VERSION]) -dnl ---------------------------------- +dnl PKG_PROG_PKG_CONFIG([MIN-VERSION], [ACTION-IF-NOT-FOUND]) +dnl --------------------------------------------------------- dnl Since: 0.16 dnl @@ -78,4 +78,10 @@ dnl used since that's the first version where most current features of dnl pkg-config existed. +dnl +dnl If pkg-config is not found or older than specified, it will result +dnl in an empty PKG_CONFIG variable. To avoid widespread issues with +dnl scripts not checking it, ACTION-IF-NOT-FOUND defaults to aborting. +dnl You can specify [PKG_CONFIG=false] as an action instead, which would +dnl result in pkg-config tests failing, but no bogus error messages. AC_DEFUN([PKG_PROG_PKG_CONFIG], [m4_pattern_forbid([^_?PKG_[A-Z_]+$]) @@ -98,4 +104,7 @@ PKG_CONFIG="" fi +fi +if test -z "$PKG_CONFIG"; then + m4_default([$2], [AC_MSG_ERROR([pkg-config not found])]) fi[]dnl ])dnl PKG_PROG_PKG_CONFIG @@ -365,5 +374,5 @@ ])dnl PKG_HAVE_DEFINE_WITH_MODULES -# Copyright (C) 2002-2021 Free Software Foundation, Inc. +# Copyright (C) 2002-2024 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation @@ -377,8 +386,8 @@ # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], -[am__api_version='1.16' +[am__api_version='1.17' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.16.5], [], +m4_if([$1], [1.17], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) @@ -396,5 +405,5 @@ # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.16.5])dnl +[AM_AUTOMAKE_VERSION([1.17])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl @@ -403,5 +412,5 @@ # AM_AUX_DIR_EXPAND -*- Autoconf -*- -# Copyright (C) 2001-2021 Free Software Foundation, Inc. +# Copyright (C) 2001-2024 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation @@ -455,5 +464,5 @@ # AM_CONDITIONAL -*- Autoconf -*- -# Copyright (C) 1997-2021 Free Software Foundation, Inc. +# Copyright (C) 1997-2024 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation @@ -486,5 +495,5 @@ fi])]) -# Copyright (C) 1999-2021 Free Software Foundation, Inc. +# Copyright (C) 1999-2024 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation @@ -618,5 +627,5 @@ # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: + # When given -MP, icc 7.0 and 7.1 complain thus: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: @@ -677,5 +686,5 @@ # Generate code to set up dependency tracking. -*- Autoconf -*- -# Copyright (C) 1999-2021 Free Software Foundation, Inc. +# Copyright (C) 1999-2024 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation @@ -745,5 +754,5 @@ # Do all the work for Automake. -*- Autoconf -*- -# Copyright (C) 1996-2021 Free Software Foundation, Inc. +# Copyright (C) 1996-2024 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation @@ -879,5 +888,5 @@ AC_SUBST([CSCOPE]) -AC_REQUIRE([AM_SILENT_RULES])dnl +AC_REQUIRE([_AM_SILENT_RULES])dnl dnl The testsuite driver may need to know about EXEEXT, so add the dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This @@ -887,45 +896,7 @@ [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl -# POSIX will say in a future version that running "rm -f" with no argument -# is OK; and we want to be able to make that assumption in our Makefile -# recipes. So use an aggressive probe to check that the usage we want is -# actually supported "in the wild" to an acceptable degree. -# See automake bug#10828. -# To make any issue more visible, cause the running configure to be aborted -# by default if the 'rm' program in use doesn't match our expectations; the -# user can still override this though. -if rm -f && rm -fr && rm -rf; then : OK; else - cat >&2 <<'END' -Oops! - -Your 'rm' program seems unable to run without file operands specified -on the command line, even when the '-f' option is present. This is contrary -to the behaviour of most rm programs out there, and not conforming with -the upcoming POSIX standard: - -Please tell bug-automake@gnu.org about your system, including the value -of your $PATH and any error possibly output before this message. This -can help us improve future automake versions. - -END - if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then - echo 'Configuration will proceed anyway, since you have set the' >&2 - echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 - echo >&2 - else - cat >&2 <<'END' -Aborting the configuration process, to ensure you take notice of the issue. - -You can download and install GNU coreutils to get an 'rm' implementation -that behaves properly: . +AC_REQUIRE([_AM_PROG_RM_F]) +AC_REQUIRE([_AM_PROG_XARGS_N]) -If you want to complete the configuration process using your problematic -'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM -to "yes", and re-run configure. - -END - AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) - fi -fi dnl The trailing newline in this macro's definition is deliberate, for dnl backward compatibility and to allow trailing 'dnl'-style comments @@ -960,5 +931,5 @@ echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) -# Copyright (C) 2001-2021 Free Software Foundation, Inc. +# Copyright (C) 2001-2024 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation @@ -981,5 +952,5 @@ AC_SUBST([install_sh])]) -# Copyright (C) 2003-2021 Free Software Foundation, Inc. +# Copyright (C) 2003-2024 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation @@ -1002,5 +973,5 @@ # Check to see how 'make' treats includes. -*- Autoconf -*- -# Copyright (C) 2001-2021 Free Software Foundation, Inc. +# Copyright (C) 2001-2024 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation @@ -1045,5 +1016,5 @@ # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- -# Copyright (C) 1997-2021 Free Software Foundation, Inc. +# Copyright (C) 1997-2024 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation @@ -1079,5 +1050,5 @@ # Helper functions for option handling. -*- Autoconf -*- -# Copyright (C) 2001-2021 Free Software Foundation, Inc. +# Copyright (C) 2001-2024 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation @@ -1108,5 +1079,5 @@ [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) -# Copyright (C) 1999-2021 Free Software Foundation, Inc. +# Copyright (C) 1999-2024 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation @@ -1155,5 +1126,21 @@ AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) -# Copyright (C) 2001-2021 Free Software Foundation, Inc. +# Copyright (C) 2022-2024 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_PROG_RM_F +# --------------- +# Check whether 'rm -f' without any arguments works. +# https://bugs.gnu.org/10828 +AC_DEFUN([_AM_PROG_RM_F], +[am__rm_f_notfound= +AS_IF([(rm -f && rm -fr && rm -rf) 2>/dev/null], [], [am__rm_f_notfound='""']) +AC_SUBST(am__rm_f_notfound) +]) + +# Copyright (C) 2001-2024 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation @@ -1174,5 +1161,5 @@ # Check to make sure that the build environment is sane. -*- Autoconf -*- -# Copyright (C) 1996-2021 Free Software Foundation, Inc. +# Copyright (C) 1996-2024 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation @@ -1180,8 +1167,161 @@ # with or without modifications, as long as this notice is preserved. +# _AM_SLEEP_FRACTIONAL_SECONDS +# ---------------------------- +AC_DEFUN([_AM_SLEEP_FRACTIONAL_SECONDS], [dnl +AC_CACHE_CHECK([whether sleep supports fractional seconds], + am_cv_sleep_fractional_seconds, [dnl +AS_IF([sleep 0.001 2>/dev/null], [am_cv_sleep_fractional_seconds=yes], + [am_cv_sleep_fractional_seconds=no]) +])]) + +# _AM_FILESYSTEM_TIMESTAMP_RESOLUTION +# ----------------------------------- +# Determine the filesystem's resolution for file modification +# timestamps. The coarsest we know of is FAT, with a resolution +# of only two seconds, even with the most recent "exFAT" extensions. +# The finest (e.g. ext4 with large inodes, XFS, ZFS) is one +# nanosecond, matching clock_gettime. However, it is probably not +# possible to delay execution of a shell script for less than one +# millisecond, due to process creation overhead and scheduling +# granularity, so we don't check for anything finer than that. (See below.) +AC_DEFUN([_AM_FILESYSTEM_TIMESTAMP_RESOLUTION], [dnl +AC_REQUIRE([_AM_SLEEP_FRACTIONAL_SECONDS]) +AC_CACHE_CHECK([filesystem timestamp resolution], + am_cv_filesystem_timestamp_resolution, [dnl +# Default to the worst case. +am_cv_filesystem_timestamp_resolution=2 + +# Only try to go finer than 1 sec if sleep can do it. +# Don't try 1 sec, because if 0.01 sec and 0.1 sec don't work, +# - 1 sec is not much of a win compared to 2 sec, and +# - it takes 2 seconds to perform the test whether 1 sec works. +# +# Instead, just use the default 2s on platforms that have 1s resolution, +# accept the extra 1s delay when using $sleep in the Automake tests, in +# exchange for not incurring the 2s delay for running the test for all +# packages. +# +am_try_resolutions= +if test "$am_cv_sleep_fractional_seconds" = yes; then + # Even a millisecond often causes a bunch of false positives, + # so just try a hundredth of a second. The time saved between .001 and + # .01 is not terribly consequential. + am_try_resolutions="0.01 0.1 $am_try_resolutions" +fi + +# In order to catch current-generation FAT out, we must *modify* files +# that already exist; the *creation* timestamp is finer. Use names +# that make ls -t sort them differently when they have equal +# timestamps than when they have distinct timestamps, keeping +# in mind that ls -t prints the *newest* file first. +rm -f conftest.ts? +: > conftest.ts1 +: > conftest.ts2 +: > conftest.ts3 + +# Make sure ls -t actually works. Do 'set' in a subshell so we don't +# clobber the current shell's arguments. (Outer-level square brackets +# are removed by m4; they're present so that m4 does not expand +# ; be careful, easy to get confused.) +if ( + set X `[ls -t conftest.ts[12]]` && + { + test "$[]*" != "X conftest.ts1 conftest.ts2" || + test "$[]*" != "X conftest.ts2 conftest.ts1"; + } +); then :; else + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + _AS_ECHO_UNQUOTED( + ["Bad output from ls -t: \"`[ls -t conftest.ts[12]]`\""], + [AS_MESSAGE_LOG_FD]) + AC_MSG_FAILURE([ls -t produces unexpected output. +Make sure there is not a broken ls alias in your environment.]) +fi + +for am_try_res in $am_try_resolutions; do + # Any one fine-grained sleep might happen to cross the boundary + # between two values of a coarser actual resolution, but if we do + # two fine-grained sleeps in a row, at least one of them will fall + # entirely within a coarse interval. + echo alpha > conftest.ts1 + sleep $am_try_res + echo beta > conftest.ts2 + sleep $am_try_res + echo gamma > conftest.ts3 + + # We assume that 'ls -t' will make use of high-resolution + # timestamps if the operating system supports them at all. + if (set X `ls -t conftest.ts?` && + test "$[]2" = conftest.ts3 && + test "$[]3" = conftest.ts2 && + test "$[]4" = conftest.ts1); then + # + # Ok, ls -t worked. If we're at a resolution of 1 second, we're done, + # because we don't need to test make. + make_ok=true + if test $am_try_res != 1; then + # But if we've succeeded so far with a subsecond resolution, we + # have one more thing to check: make. It can happen that + # everything else supports the subsecond mtimes, but make doesn't; + # notably on macOS, which ships make 3.81 from 2006 (the last one + # released under GPLv2). https://bugs.gnu.org/68808 + # + # We test $MAKE if it is defined in the environment, else "make". + # It might get overridden later, but our hope is that in practice + # it does not matter: it is the system "make" which is (by far) + # the most likely to be broken, whereas if the user overrides it, + # probably they did so with a better, or at least not worse, make. + # https://lists.gnu.org/archive/html/automake/2024-06/msg00051.html + # + # Create a Makefile (real tab character here): + rm -f conftest.mk + echo 'conftest.ts1: conftest.ts2' >conftest.mk + echo ' touch conftest.ts2' >>conftest.mk + # + # Now, running + # touch conftest.ts1; touch conftest.ts2; make + # should touch ts1 because ts2 is newer. This could happen by luck, + # but most often, it will fail if make's support is insufficient. So + # test for several consecutive successes. + # + # (We reuse conftest.ts[12] because we still want to modify existing + # files, not create new ones, per above.) + n=0 + make=${MAKE-make} + until test $n -eq 3; do + echo one > conftest.ts1 + sleep $am_try_res + echo two > conftest.ts2 # ts2 should now be newer than ts1 + if $make -f conftest.mk | grep 'up to date' >/dev/null; then + make_ok=false + break # out of $n loop + fi + n=`expr $n + 1` + done + fi + # + if $make_ok; then + # Everything we know to check worked out, so call this resolution good. + am_cv_filesystem_timestamp_resolution=$am_try_res + break # out of $am_try_res loop + fi + # Otherwise, we'll go on to check the next resolution. + fi +done +rm -f conftest.ts? +# (end _am_filesystem_timestamp_resolution) +])]) + # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], -[AC_MSG_CHECKING([whether build environment is sane]) +[AC_REQUIRE([_AM_FILESYSTEM_TIMESTAMP_RESOLUTION]) +# This check should not be cached, as it may vary across builds of +# different projects. +AC_MSG_CHECKING([whether build environment is sane]) # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. @@ -1202,47 +1342,38 @@ # (eg FreeBSD returns the mod time of the symlink's containing # directory). -if ( - am_has_slept=no - for am_try in 1 2; do - echo "timestamp, slept: $am_has_slept" > conftest.file - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken - alias in your environment]) - fi - if test "$[2]" = conftest.file || test $am_try -eq 2; then - break - fi - # Just in case. - sleep 1 - am_has_slept=yes - done - test "$[2]" = conftest.file - ) -then - # Ok. - : -else - AC_MSG_ERROR([newly created file is older than distributed files! +am_build_env_is_sane=no +am_has_slept=no +rm -f conftest.file +for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + if ( + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$[]*" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + test "$[]2" = conftest.file + ); then + am_build_env_is_sane=yes + break + fi + # Just in case. + sleep "$am_cv_filesystem_timestamp_resolution" + am_has_slept=yes +done + +AC_MSG_RESULT([$am_build_env_is_sane]) +if test "$am_build_env_is_sane" = no; then + AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi -AC_MSG_RESULT([yes]) + # If we didn't sleep, we still need to ensure time stamps of config.status and # generated files are strictly newer. am_sleep_pid= -if grep 'slept: no' conftest.file >/dev/null 2>&1; then - ( sleep 1 ) & +AS_IF([test -e conftest.file || grep 'slept: no' conftest.file >/dev/null 2>&1],, [dnl + ( sleep "$am_cv_filesystem_timestamp_resolution" ) & am_sleep_pid=$! -fi +]) AC_CONFIG_COMMANDS_PRE( [AC_MSG_CHECKING([that generated files are newer than configure]) @@ -1255,5 +1386,5 @@ ]) -# Copyright (C) 2009-2021 Free Software Foundation, Inc. +# Copyright (C) 2009-2024 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation @@ -1261,10 +1392,10 @@ # with or without modifications, as long as this notice is preserved. -# AM_SILENT_RULES([DEFAULT]) -# -------------------------- -# Enable less verbose build rules; with the default set to DEFAULT -# ("yes" being less verbose, "no" or empty being verbose). -AC_DEFUN([AM_SILENT_RULES], -[AC_ARG_ENABLE([silent-rules], [dnl +# _AM_SILENT_RULES +# ---------------- +# Enable less verbose build rules support. +AC_DEFUN([_AM_SILENT_RULES], +[AM_DEFAULT_VERBOSITY=1 +AC_ARG_ENABLE([silent-rules], [dnl AS_HELP_STRING( [--enable-silent-rules], @@ -1274,9 +1405,4 @@ [verbose build output (undo: "make V=0")])dnl ]) -case $enable_silent_rules in @%:@ ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; - *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; -esac dnl dnl A few 'make' implementations (e.g., NonStop OS and NextStep) @@ -1297,12 +1423,4 @@ am_cv_make_support_nested_variables=no fi]) -if test $am_cv_make_support_nested_variables = yes; then - dnl Using '$V' instead of '$(V)' breaks IRIX make. - AM_V='$(V)' - AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' -else - AM_V=$AM_DEFAULT_VERBOSITY - AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY -fi AC_SUBST([AM_V])dnl AM_SUBST_NOTMAKE([AM_V])dnl @@ -1313,7 +1431,31 @@ AC_SUBST([AM_BACKSLASH])dnl _AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl +dnl Delay evaluation of AM_DEFAULT_VERBOSITY to the end to allow multiple calls +dnl to AM_SILENT_RULES to change the default value. +AC_CONFIG_COMMANDS_PRE([dnl +case $enable_silent_rules in @%:@ ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; +esac +if test $am_cv_make_support_nested_variables = yes; then + dnl Using '$V' instead of '$(V)' breaks IRIX make. + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +])dnl ]) -# Copyright (C) 2001-2021 Free Software Foundation, Inc. +# AM_SILENT_RULES([DEFAULT]) +# -------------------------- +# Set the default verbosity level to DEFAULT ("yes" being less verbose, "no" or +# empty being verbose). +AC_DEFUN([AM_SILENT_RULES], +[AC_REQUIRE([_AM_SILENT_RULES]) +AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1])]) + +# Copyright (C) 2001-2024 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation @@ -1343,5 +1485,5 @@ AC_SUBST([INSTALL_STRIP_PROGRAM])]) -# Copyright (C) 2006-2021 Free Software Foundation, Inc. +# Copyright (C) 2006-2024 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation @@ -1362,5 +1504,5 @@ # Check how to create a tarball. -*- Autoconf -*- -# Copyright (C) 2004-2021 Free Software Foundation, Inc. +# Copyright (C) 2004-2024 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation @@ -1408,13 +1550,17 @@ am_gid=`id -g || echo unknown` AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) - if test $am_uid -le $am_max_uid; then - AC_MSG_RESULT([yes]) + if test x$am_uid = xunknown; then + AC_MSG_WARN([ancient id detected; assuming current UID is ok, but dist-ustar might not work]) + elif test $am_uid -le $am_max_uid; then + AC_MSG_RESULT([yes]) else - AC_MSG_RESULT([no]) - _am_tools=none + AC_MSG_RESULT([no]) + _am_tools=none fi AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) - if test $am_gid -le $am_max_gid; then - AC_MSG_RESULT([yes]) + if test x$gm_gid = xunknown; then + AC_MSG_WARN([ancient id detected; assuming current GID is ok, but dist-ustar might not work]) + elif test $am_gid -le $am_max_gid; then + AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) @@ -1493,2 +1639,22 @@ ]) # _AM_PROG_TAR +# Copyright (C) 2022-2024 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_PROG_XARGS_N +# ---------------- +# Check whether 'xargs -n' works. It should work everywhere, so the fallback +# is not optimized at all as we never expect to use it. +AC_DEFUN([_AM_PROG_XARGS_N], +[AC_CACHE_CHECK([xargs -n works], am_cv_xargs_n_works, [dnl +AS_IF([test "`echo 1 2 3 | xargs -n2 echo`" = "1 2 +3"], [am_cv_xargs_n_works=yes], [am_cv_xargs_n_works=no])]) +AS_IF([test "$am_cv_xargs_n_works" = yes], [am__xargs_n='xargs -n'], [dnl + am__xargs_n='am__xargs_n () { shift; sed "s/ /\\n/g" | while read am__xargs_n_arg; do "$@" "$am__xargs_n_arg"; done; }' +])dnl +AC_SUBST(am__xargs_n) +]) + diff -U2 -r /var/lib/copr-rpmbuild/results/eradio/upstream-unpacked/Source0/eradio-0.0.13/compile /var/lib/copr-rpmbuild/results/eradio/srpm-unpacked/eradio-0.0.13.tar.gz-extract/eradio-0.0.13/compile --- /var/lib/copr-rpmbuild/results/eradio/upstream-unpacked/Source0/eradio-0.0.13/compile 2025-10-17 00:03:47.000000000 +0000 +++ /var/lib/copr-rpmbuild/results/eradio/srpm-unpacked/eradio-0.0.13.tar.gz-extract/eradio-0.0.13/compile 2025-10-12 13:36:04.000000000 +0000 @@ -2,7 +2,7 @@ # Wrapper for compilers which do not understand '-c -o'. -scriptversion=2018-03-07.03; # UTC +scriptversion=2024-06-19.01; # UTC -# Copyright (C) 1999-2021 Free Software Foundation, Inc. +# Copyright (C) 1999-2024 Free Software Foundation, Inc. # Written by Tom Tromey . # @@ -144,5 +144,5 @@ eat=1 case $2 in - *.o | *.[oO][bB][jJ]) + *.o | *.lo | *.[oO][bB][jJ]) func_file_conv "$2" set x "$@" -Fo"$file" @@ -249,12 +249,15 @@ Report bugs to . +GNU Automake home page: . +General help using GNU software: . EOF exit $? ;; -v | --v*) - echo "compile $scriptversion" + echo "compile (GNU Automake) $scriptversion" exit $? ;; cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \ + clang-cl | *[/\\]clang-cl | clang-cl.exe | *[/\\]clang-cl.exe | \ icl | *[/\\]icl | icl.exe | *[/\\]icl.exe ) func_cl_wrapper "$@" # Doesn't return... diff -U2 -r /var/lib/copr-rpmbuild/results/eradio/upstream-unpacked/Source0/eradio-0.0.13/configure /var/lib/copr-rpmbuild/results/eradio/srpm-unpacked/eradio-0.0.13.tar.gz-extract/eradio-0.0.13/configure --- /var/lib/copr-rpmbuild/results/eradio/upstream-unpacked/Source0/eradio-0.0.13/configure 2025-10-17 00:03:46.000000000 +0000 +++ /var/lib/copr-rpmbuild/results/eradio/srpm-unpacked/eradio-0.0.13.tar.gz-extract/eradio-0.0.13/configure 2025-10-17 00:01:17.000000000 +0000 @@ -1,8 +1,8 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.71 for eradio 0.0.13. +# Generated by GNU Autoconf 2.72 for eradio 0.0.13. # # -# Copyright (C) 1992-1996, 1998-2017, 2020-2021 Free Software Foundation, +# Copyright (C) 1992-1996, 1998-2017, 2020-2023 Free Software Foundation, # Inc. # @@ -16,5 +16,4 @@ # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh -as_nop=: if test ${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1 then : @@ -25,10 +24,11 @@ alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST -else $as_nop - case `(set -o) 2>/dev/null` in #( +else case e in #( + e) case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; +esac ;; esac fi @@ -102,5 +102,5 @@ ;; esac -# We did not find ourselves, most probably we were run as `sh COMMAND' +# We did not find ourselves, most probably we were run as 'sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then @@ -132,5 +132,5 @@ exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail -# out after a failed `exec'. +# out after a failed 'exec'. printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2 exit 255 @@ -139,6 +139,5 @@ { _as_can_reexec=; unset _as_can_reexec;} if test "x$CONFIG_SHELL" = x; then - as_bourne_compatible="as_nop=: -if test \${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1 + as_bourne_compatible="if test \${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1 then : emulate sh @@ -148,10 +147,11 @@ alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST -else \$as_nop - case \`(set -o) 2>/dev/null\` in #( +else case e in #( + e) case \`(set -o) 2>/dev/null\` in #( *posix*) : set -o posix ;; #( *) : ;; +esac ;; esac fi @@ -171,6 +171,7 @@ then : -else \$as_nop - exitcode=1; echo positional parameters were not saved. +else case e in #( + e) exitcode=1; echo positional parameters were not saved. ;; +esac fi test x\$exitcode = x0 || exit 1 @@ -185,12 +186,13 @@ then : as_have_required=yes -else $as_nop - as_have_required=no +else case e in #( + e) as_have_required=no ;; +esac fi if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null then : -else $as_nop - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +else case e in #( + e) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR as_found=false for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH @@ -225,10 +227,11 @@ then : -else $as_nop - if { test -f "$SHELL" || test -f "$SHELL.exe"; } && +else case e in #( + e) if { test -f "$SHELL" || test -f "$SHELL.exe"; } && as_run=a "$SHELL" -c "$as_bourne_compatible""$as_required" 2>/dev/null then : CONFIG_SHELL=$SHELL as_have_required=yes -fi +fi ;; +esac fi @@ -252,5 +255,5 @@ exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail -# out after a failed `exec'. +# out after a failed 'exec'. printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2 exit 255 @@ -271,5 +274,6 @@ fi exit 1 -fi +fi ;; +esac fi fi @@ -310,12 +314,4 @@ exit $1 } # as_fn_exit -# as_fn_nop -# --------- -# Do nothing but, unlike ":", preserve the value of $?. -as_fn_nop () -{ - return $? -} -as_nop=as_fn_nop # as_fn_mkdir_p @@ -386,9 +382,10 @@ eval $1+=\$2 }' -else $as_nop - as_fn_append () +else case e in #( + e) as_fn_append () { eval $1=\$$1\$2 - } + } ;; +esac fi # as_fn_append @@ -404,19 +401,12 @@ as_val=$(( $* )) }' -else $as_nop - as_fn_arith () +else case e in #( + e) as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` - } + } ;; +esac fi # as_fn_arith -# as_fn_nop -# --------- -# Do nothing but, unlike ":", preserve the value of $?. -as_fn_nop () -{ - return $? -} -as_nop=as_fn_nop # as_fn_error STATUS ERROR [LINENO LOG_FD] @@ -492,4 +482,6 @@ ' <$as_myself | sed ' + t clear + :clear s/[$]LINENO.*/&-/ t lineno @@ -540,5 +532,4 @@ as_echo_n='printf %s' - rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then @@ -552,7 +543,7 @@ as_ln_s='ln -s' # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -pR'. + # 1) On MSYS, both 'ln -s file dir' and 'ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; 'ln -s' creates a wrapper executable. + # In both cases, we have to default to 'cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' @@ -579,8 +570,10 @@ # Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" +as_sed_cpp="y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" +as_tr_cpp="eval sed '$as_sed_cpp'" # deprecated # Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" +as_sed_sh="y%*+%pp%;s%[^_$as_cr_alnum]%_%g" +as_tr_sh="eval sed '$as_sed_sh'" # deprecated @@ -641,4 +634,6 @@ CFLAGS CC +am__xargs_n +am__rm_f_notfound AM_BACKSLASH AM_DEFAULT_VERBOSITY @@ -840,5 +835,5 @@ # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: \`$ac_useropt'" + as_fn_error $? "invalid feature name: '$ac_useropt'" ac_useropt_orig=$ac_useropt ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'` @@ -866,5 +861,5 @@ # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: \`$ac_useropt'" + as_fn_error $? "invalid feature name: '$ac_useropt'" ac_useropt_orig=$ac_useropt ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'` @@ -1079,5 +1074,5 @@ # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: \`$ac_useropt'" + as_fn_error $? "invalid package name: '$ac_useropt'" ac_useropt_orig=$ac_useropt ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'` @@ -1095,5 +1090,5 @@ # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: \`$ac_useropt'" + as_fn_error $? "invalid package name: '$ac_useropt'" ac_useropt_orig=$ac_useropt ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'` @@ -1125,6 +1120,6 @@ x_libraries=$ac_optarg ;; - -*) as_fn_error $? "unrecognized option: \`$ac_option' -Try \`$0 --help' for more information" + -*) as_fn_error $? "unrecognized option: '$ac_option' +Try '$0 --help' for more information" ;; @@ -1134,5 +1129,5 @@ case $ac_envvar in #( '' | [0-9]* | *[!_$as_cr_alnum]* ) - as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + as_fn_error $? "invalid variable name: '$ac_envvar'" ;; esac eval $ac_envvar=\$ac_optarg @@ -1184,5 +1179,5 @@ done -# There might be people who depend on the old broken behavior: `$host' +# There might be people who depend on the old broken behavior: '$host' # used to hold the argument of --host etc. # FIXME: To remove some day. @@ -1252,5 +1247,5 @@ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" fi -ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_msg="sources are in $srcdir, but 'cd $srcdir' does not work" ac_abs_confdir=`( cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" @@ -1280,5 +1275,5 @@ # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures eradio 0.0.13 to adapt to many kinds of systems. +'configure' configures eradio 0.0.13 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1294,9 +1289,9 @@ --help=recursive display the short help of all the included packages -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking ...' messages + -q, --quiet, --silent do not print 'checking ...' messages --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' + -C, --config-cache alias for '--cache-file=config.cache' -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] + --srcdir=DIR find the sources in DIR [configure dir or '..'] Installation directories: @@ -1306,8 +1301,8 @@ [PREFIX] -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. +By default, 'make install' will install all the files in +'$ac_default_prefix/bin', '$ac_default_prefix/lib' etc. You can specify +an installation prefix other than '$ac_default_prefix' using '--prefix', +for instance '--prefix=\$HOME'. For better control, use the options below. @@ -1381,5 +1376,5 @@ LIBXML_LIBS linker flags for LIBXML, overriding pkg-config -Use these variables to override the choices made by `configure' or to help +Use these variables to override the choices made by 'configure' or to help it to find libraries and programs with nonstandard names/locations. @@ -1449,7 +1444,7 @@ cat <<\_ACEOF eradio configure 0.0.13 -generated by GNU Autoconf 2.71 +generated by GNU Autoconf 2.72 -Copyright (C) 2021 Free Software Foundation, Inc. +Copyright (C) 2023 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. @@ -1490,9 +1485,10 @@ then : ac_retval=0 -else $as_nop - printf "%s\n" "$as_me: failed program was:" >&5 +else case e in #( + e) printf "%s\n" "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - ac_retval=1 + ac_retval=1 ;; +esac fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno @@ -1525,5 +1521,5 @@ It was created by eradio $as_me 0.0.13, which was -generated by GNU Autoconf 2.71. Invocation command line was +generated by GNU Autoconf 2.72. Invocation command line was $ $0$ac_configure_args_raw @@ -1771,8 +1767,8 @@ sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" \ - || { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;} + || { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 +printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} as_fn_error $? "failed to load site script $ac_site_file -See \`config.log' for more details" "$LINENO" 5; } +See 'config.log' for more details" "$LINENO" 5; } fi done @@ -1810,7 +1806,5 @@ struct buf { int x; }; struct buf * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; +static char *e (char **p, int i) { return p[i]; @@ -1826,4 +1820,19 @@ } +/* C89 style stringification. */ +#define noexpand_stringify(a) #a +const char *stringified = noexpand_stringify(arbitrary+token=sequence); + +/* C89 style token pasting. Exercises some of the corner cases that + e.g. old MSVC gets wrong, but not very hard. */ +#define noexpand_concat(a,b) a##b +#define expand_concat(a,b) noexpand_concat(a,b) +extern int vA; +extern int vbee; +#define aye A +#define bee B +int *pvA = &expand_concat(v,aye); +int *pvbee = &noexpand_concat(v,bee); + /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not \xHH hex character constants. @@ -1853,9 +1862,11 @@ # Test code for whether the C compiler supports C99 (global declarations) ac_c_conftest_c99_globals=' -// Does the compiler advertise C99 conformance? +/* Does the compiler advertise C99 conformance? */ #if !defined __STDC_VERSION__ || __STDC_VERSION__ < 199901L # error "Compiler does not advertise C99 conformance" #endif +// See if C++-style comments work. + #include extern int puts (const char *); @@ -1863,4 +1874,5 @@ extern int dprintf (int, const char *, ...); extern void *malloc (size_t); +extern void free (void *); // Check varargs macros. These examples are taken from C99 6.10.3.5. @@ -1912,5 +1924,4 @@ test_restrict (ccp restrict text) { - // See if C++-style comments work. // Iterate through items via the restricted pointer. // Also check for declarations in for loops. @@ -1978,4 +1989,6 @@ for (int i = 0; i < ia->datasize; ++i) ia->data[i] = i * 1.234; + // Work around memory leak warnings. + free (ia); // Check named initializers. @@ -1999,5 +2012,5 @@ # Test code for whether the C compiler supports C11 (global declarations) ac_c_conftest_c11_globals=' -// Does the compiler advertise C11 conformance? +/* Does the compiler advertise C11 conformance? */ #if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L # error "Compiler does not advertise C11 conformance" @@ -2182,6 +2195,7 @@ then : -else $as_nop - as_fn_error $? "cannot find required auxiliary files:$ac_missing_aux_files" "$LINENO" 5 +else case e in #( + e) as_fn_error $? "cannot find required auxiliary files:$ac_missing_aux_files" "$LINENO" 5 ;; +esac fi @@ -2211,10 +2225,10 @@ case $ac_old_set,$ac_new_set in set,) - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -printf "%s\n" "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: '$ac_var' was set to '$ac_old_val' in the previous run" >&5 +printf "%s\n" "$as_me: error: '$ac_var' was set to '$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 -printf "%s\n" "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: '$ac_var' was not set in the previous run" >&5 +printf "%s\n" "$as_me: error: '$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; @@ -2225,16 +2239,16 @@ ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 -printf "%s\n" "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: '$ac_var' has changed since the previous run:" >&5 +printf "%s\n" "$as_me: error: '$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 -printf "%s\n" "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in '$ac_var' since the previous run:" >&5 +printf "%s\n" "$as_me: warning: ignoring whitespace changes in '$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 -printf "%s\n" "$as_me: former value: \`$ac_old_val'" >&2;} - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 -printf "%s\n" "$as_me: current value: \`$ac_new_val'" >&2;} + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: former value: '$ac_old_val'" >&5 +printf "%s\n" "$as_me: former value: '$ac_old_val'" >&2;} + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: current value: '$ac_new_val'" >&5 +printf "%s\n" "$as_me: current value: '$ac_new_val'" >&2;} fi;; esac @@ -2252,9 +2266,9 @@ done if $ac_cache_corrupted; then - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;} + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 +printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 printf "%s\n" "$as_me: error: changes in the environment can compromise the build" >&2;} - as_fn_error $? "run \`${MAKE-make} distclean' and/or \`rm $cache_file' + as_fn_error $? "run '${MAKE-make} distclean' and/or 'rm $cache_file' and start over" "$LINENO" 5 fi @@ -2270,5 +2284,5 @@ -am__api_version='1.16' +am__api_version='1.17' @@ -2294,6 +2308,6 @@ then : printf %s "(cached) " >&6 -else $as_nop - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +else case e in #( + e) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do @@ -2349,5 +2363,6 @@ rm -rf conftest.one conftest.two conftest.dir - + ;; +esac fi if test ${ac_cv_path_install+y}; then @@ -2372,4 +2387,163 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether sleep supports fractional seconds" >&5 +printf %s "checking whether sleep supports fractional seconds... " >&6; } +if test ${am_cv_sleep_fractional_seconds+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if sleep 0.001 2>/dev/null +then : + am_cv_sleep_fractional_seconds=yes +else case e in #( + e) am_cv_sleep_fractional_seconds=no ;; +esac +fi + ;; +esac +fi +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_cv_sleep_fractional_seconds" >&5 +printf "%s\n" "$am_cv_sleep_fractional_seconds" >&6; } + +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking filesystem timestamp resolution" >&5 +printf %s "checking filesystem timestamp resolution... " >&6; } +if test ${am_cv_filesystem_timestamp_resolution+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) # Default to the worst case. +am_cv_filesystem_timestamp_resolution=2 + +# Only try to go finer than 1 sec if sleep can do it. +# Don't try 1 sec, because if 0.01 sec and 0.1 sec don't work, +# - 1 sec is not much of a win compared to 2 sec, and +# - it takes 2 seconds to perform the test whether 1 sec works. +# +# Instead, just use the default 2s on platforms that have 1s resolution, +# accept the extra 1s delay when using $sleep in the Automake tests, in +# exchange for not incurring the 2s delay for running the test for all +# packages. +# +am_try_resolutions= +if test "$am_cv_sleep_fractional_seconds" = yes; then + # Even a millisecond often causes a bunch of false positives, + # so just try a hundredth of a second. The time saved between .001 and + # .01 is not terribly consequential. + am_try_resolutions="0.01 0.1 $am_try_resolutions" +fi + +# In order to catch current-generation FAT out, we must *modify* files +# that already exist; the *creation* timestamp is finer. Use names +# that make ls -t sort them differently when they have equal +# timestamps than when they have distinct timestamps, keeping +# in mind that ls -t prints the *newest* file first. +rm -f conftest.ts? +: > conftest.ts1 +: > conftest.ts2 +: > conftest.ts3 + +# Make sure ls -t actually works. Do 'set' in a subshell so we don't +# clobber the current shell's arguments. (Outer-level square brackets +# are removed by m4; they're present so that m4 does not expand +# ; be careful, easy to get confused.) +if ( + set X `ls -t conftest.ts[12]` && + { + test "$*" != "X conftest.ts1 conftest.ts2" || + test "$*" != "X conftest.ts2 conftest.ts1"; + } +); then :; else + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + printf "%s\n" ""Bad output from ls -t: \"`ls -t conftest.ts[12]`\""" >&5 + { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 +printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} +as_fn_error $? "ls -t produces unexpected output. +Make sure there is not a broken ls alias in your environment. +See 'config.log' for more details" "$LINENO" 5; } +fi + +for am_try_res in $am_try_resolutions; do + # Any one fine-grained sleep might happen to cross the boundary + # between two values of a coarser actual resolution, but if we do + # two fine-grained sleeps in a row, at least one of them will fall + # entirely within a coarse interval. + echo alpha > conftest.ts1 + sleep $am_try_res + echo beta > conftest.ts2 + sleep $am_try_res + echo gamma > conftest.ts3 + + # We assume that 'ls -t' will make use of high-resolution + # timestamps if the operating system supports them at all. + if (set X `ls -t conftest.ts?` && + test "$2" = conftest.ts3 && + test "$3" = conftest.ts2 && + test "$4" = conftest.ts1); then + # + # Ok, ls -t worked. If we're at a resolution of 1 second, we're done, + # because we don't need to test make. + make_ok=true + if test $am_try_res != 1; then + # But if we've succeeded so far with a subsecond resolution, we + # have one more thing to check: make. It can happen that + # everything else supports the subsecond mtimes, but make doesn't; + # notably on macOS, which ships make 3.81 from 2006 (the last one + # released under GPLv2). https://bugs.gnu.org/68808 + # + # We test $MAKE if it is defined in the environment, else "make". + # It might get overridden later, but our hope is that in practice + # it does not matter: it is the system "make" which is (by far) + # the most likely to be broken, whereas if the user overrides it, + # probably they did so with a better, or at least not worse, make. + # https://lists.gnu.org/archive/html/automake/2024-06/msg00051.html + # + # Create a Makefile (real tab character here): + rm -f conftest.mk + echo 'conftest.ts1: conftest.ts2' >conftest.mk + echo ' touch conftest.ts2' >>conftest.mk + # + # Now, running + # touch conftest.ts1; touch conftest.ts2; make + # should touch ts1 because ts2 is newer. This could happen by luck, + # but most often, it will fail if make's support is insufficient. So + # test for several consecutive successes. + # + # (We reuse conftest.ts[12] because we still want to modify existing + # files, not create new ones, per above.) + n=0 + make=${MAKE-make} + until test $n -eq 3; do + echo one > conftest.ts1 + sleep $am_try_res + echo two > conftest.ts2 # ts2 should now be newer than ts1 + if $make -f conftest.mk | grep 'up to date' >/dev/null; then + make_ok=false + break # out of $n loop + fi + n=`expr $n + 1` + done + fi + # + if $make_ok; then + # Everything we know to check worked out, so call this resolution good. + am_cv_filesystem_timestamp_resolution=$am_try_res + break # out of $am_try_res loop + fi + # Otherwise, we'll go on to check the next resolution. + fi +done +rm -f conftest.ts? +# (end _am_filesystem_timestamp_resolution) + ;; +esac +fi +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_cv_filesystem_timestamp_resolution" >&5 +printf "%s\n" "$am_cv_filesystem_timestamp_resolution" >&6; } + +# This check should not be cached, as it may vary across builds of +# different projects. { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 printf %s "checking whether build environment is sane... " >&6; } @@ -2392,47 +2566,43 @@ # (eg FreeBSD returns the mod time of the symlink's containing # directory). -if ( - am_has_slept=no - for am_try in 1 2; do - echo "timestamp, slept: $am_has_slept" > conftest.file - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - if test "$*" != "X $srcdir/configure conftest.file" \ - && test "$*" != "X conftest.file $srcdir/configure"; then +am_build_env_is_sane=no +am_has_slept=no +rm -f conftest.file +for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + if ( + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + test "$2" = conftest.file + ); then + am_build_env_is_sane=yes + break + fi + # Just in case. + sleep "$am_cv_filesystem_timestamp_resolution" + am_has_slept=yes +done - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - as_fn_error $? "ls -t appears to fail. Make sure there is not a broken - alias in your environment" "$LINENO" 5 - fi - if test "$2" = conftest.file || test $am_try -eq 2; then - break - fi - # Just in case. - sleep 1 - am_has_slept=yes - done - test "$2" = conftest.file - ) -then - # Ok. - : -else - as_fn_error $? "newly created file is older than distributed files! +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_build_env_is_sane" >&5 +printf "%s\n" "$am_build_env_is_sane" >&6; } +if test "$am_build_env_is_sane" = no; then + as_fn_error $? "newly created file is older than distributed files! Check your system clock" "$LINENO" 5 fi -{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -printf "%s\n" "yes" >&6; } + # If we didn't sleep, we still need to ensure time stamps of config.status and # generated files are strictly newer. am_sleep_pid= -if grep 'slept: no' conftest.file >/dev/null 2>&1; then - ( sleep 1 ) & +if test -e conftest.file || grep 'slept: no' conftest.file >/dev/null 2>&1 +then : + +else case e in #( + e) ( sleep "$am_cv_filesystem_timestamp_resolution" ) & am_sleep_pid=$! + ;; +esac fi @@ -2445,5 +2615,5 @@ program_transform_name="s&\$&$program_suffix&;$program_transform_name" # Double any \ or $. -# By default was `s,x,x', remove it if useless. +# By default was 's,x,x', remove it if useless. ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' program_transform_name=`printf "%s\n" "$program_transform_name" | sed "$ac_script"` @@ -2488,6 +2658,6 @@ then : printf %s "(cached) " >&6 -else $as_nop - if test -n "$STRIP"; then +else case e in #( + e) if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else @@ -2511,5 +2681,6 @@ IFS=$as_save_IFS -fi +fi ;; +esac fi STRIP=$ac_cv_prog_STRIP @@ -2533,6 +2704,6 @@ then : printf %s "(cached) " >&6 -else $as_nop - if test -n "$ac_ct_STRIP"; then +else case e in #( + e) if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else @@ -2556,5 +2727,6 @@ IFS=$as_save_IFS -fi +fi ;; +esac fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP @@ -2592,6 +2764,6 @@ then : printf %s "(cached) " >&6 -else $as_nop - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +else case e in #( + e) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin do @@ -2607,5 +2779,5 @@ case `"$as_dir$ac_prog$ac_exec_ext" --version 2>&1` in #( 'mkdir ('*'coreutils) '* | \ - 'BusyBox '* | \ + *'BusyBox '* | \ 'mkdir (fileutils) '4.1*) ac_cv_path_mkdir=$as_dir$ac_prog$ac_exec_ext @@ -2616,5 +2788,6 @@ done IFS=$as_save_IFS - + ;; +esac fi @@ -2623,9 +2796,7 @@ MKDIR_P="$ac_cv_path_mkdir -p" else - # As a last resort, use the slow shell script. Don't cache a - # value for MKDIR_P within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - MKDIR_P="$ac_install_sh -d" + # As a last resort, use plain mkdir -p, + # in the hope it doesn't have the bugs of ancient mkdir. + MKDIR_P='mkdir -p' fi fi @@ -2642,6 +2813,6 @@ then : printf %s "(cached) " >&6 -else $as_nop - if test -n "$AWK"; then +else case e in #( + e) if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else @@ -2665,5 +2836,6 @@ IFS=$as_save_IFS -fi +fi ;; +esac fi AWK=$ac_cv_prog_AWK @@ -2687,6 +2859,6 @@ then : printf %s "(cached) " >&6 -else $as_nop - cat >conftest.make <<\_ACEOF +else case e in #( + e) cat >conftest.make <<\_ACEOF SHELL = /bin/sh all: @@ -2700,5 +2872,6 @@ eval ac_cv_prog_make_${ac_make}_set=no;; esac -rm -f conftest.make +rm -f conftest.make ;; +esac fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then @@ -2721,4 +2894,5 @@ rmdir .tst 2>/dev/null +AM_DEFAULT_VERBOSITY=1 # Check whether --enable-silent-rules was given. if test ${enable_silent_rules+y} @@ -2727,9 +2901,4 @@ fi -case $enable_silent_rules in # ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; - *) AM_DEFAULT_VERBOSITY=1;; -esac am_make=${MAKE-make} { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 @@ -2738,6 +2907,6 @@ then : printf %s "(cached) " >&6 -else $as_nop - if printf "%s\n" 'TRUE=$(BAR$(V)) +else case e in #( + e) if printf "%s\n" 'TRUE=$(BAR$(V)) BAR0=false BAR1=true @@ -2749,17 +2918,48 @@ else am_cv_make_support_nested_variables=no -fi +fi ;; +esac fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 printf "%s\n" "$am_cv_make_support_nested_variables" >&6; } -if test $am_cv_make_support_nested_variables = yes; then - AM_V='$(V)' - AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' -else - AM_V=$AM_DEFAULT_VERBOSITY - AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY -fi AM_BACKSLASH='\' +am__rm_f_notfound= +if (rm -f && rm -fr && rm -rf) 2>/dev/null +then : + +else case e in #( + e) am__rm_f_notfound='""' ;; +esac +fi + + +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking xargs -n works" >&5 +printf %s "checking xargs -n works... " >&6; } +if test ${am_cv_xargs_n_works+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test "`echo 1 2 3 | xargs -n2 echo`" = "1 2 +3" +then : + am_cv_xargs_n_works=yes +else case e in #( + e) am_cv_xargs_n_works=no ;; +esac +fi ;; +esac +fi +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_cv_xargs_n_works" >&5 +printf "%s\n" "$am_cv_xargs_n_works" >&6; } +if test "$am_cv_xargs_n_works" = yes +then : + am__xargs_n='xargs -n' +else case e in #( + e) am__xargs_n='am__xargs_n () { shift; sed "s/ /\\n/g" | while read am__xargs_n_arg; do "" "$am__xargs_n_arg"; done; }' + ;; +esac +fi + if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -2845,45 +3045,7 @@ -# POSIX will say in a future version that running "rm -f" with no argument -# is OK; and we want to be able to make that assumption in our Makefile -# recipes. So use an aggressive probe to check that the usage we want is -# actually supported "in the wild" to an acceptable degree. -# See automake bug#10828. -# To make any issue more visible, cause the running configure to be aborted -# by default if the 'rm' program in use doesn't match our expectations; the -# user can still override this though. -if rm -f && rm -fr && rm -rf; then : OK; else - cat >&2 <<'END' -Oops! - -Your 'rm' program seems unable to run without file operands specified -on the command line, even when the '-f' option is present. This is contrary -to the behaviour of most rm programs out there, and not conforming with -the upcoming POSIX standard: - -Please tell bug-automake@gnu.org about your system, including the value -of your $PATH and any error possibly output before this message. This -can help us improve future automake versions. - -END - if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then - echo 'Configuration will proceed anyway, since you have set the' >&2 - echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 - echo >&2 - else - cat >&2 <<'END' -Aborting the configuration process, to ensure you take notice of the issue. -You can download and install GNU coreutils to get an 'rm' implementation -that behaves properly: . -If you want to complete the configuration process using your problematic -'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM -to "yes", and re-run configure. -END - as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 - fi -fi @@ -2909,6 +3071,6 @@ then : printf %s "(cached) " >&6 -else $as_nop - if test -n "$CC"; then +else case e in #( + e) if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else @@ -2932,5 +3094,6 @@ IFS=$as_save_IFS -fi +fi ;; +esac fi CC=$ac_cv_prog_CC @@ -2954,6 +3117,6 @@ then : printf %s "(cached) " >&6 -else $as_nop - if test -n "$ac_ct_CC"; then +else case e in #( + e) if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else @@ -2977,5 +3140,6 @@ IFS=$as_save_IFS -fi +fi ;; +esac fi ac_ct_CC=$ac_cv_prog_ac_ct_CC @@ -3012,6 +3176,6 @@ then : printf %s "(cached) " >&6 -else $as_nop - if test -n "$CC"; then +else case e in #( + e) if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else @@ -3035,5 +3199,6 @@ IFS=$as_save_IFS -fi +fi ;; +esac fi CC=$ac_cv_prog_CC @@ -3057,6 +3222,6 @@ then : printf %s "(cached) " >&6 -else $as_nop - if test -n "$CC"; then +else case e in #( + e) if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else @@ -3097,5 +3262,6 @@ fi fi -fi +fi ;; +esac fi CC=$ac_cv_prog_CC @@ -3121,6 +3287,6 @@ then : printf %s "(cached) " >&6 -else $as_nop - if test -n "$CC"; then +else case e in #( + e) if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else @@ -3144,5 +3310,6 @@ IFS=$as_save_IFS -fi +fi ;; +esac fi CC=$ac_cv_prog_CC @@ -3170,6 +3337,6 @@ then : printf %s "(cached) " >&6 -else $as_nop - if test -n "$ac_ct_CC"; then +else case e in #( + e) if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else @@ -3193,5 +3360,6 @@ IFS=$as_save_IFS -fi +fi ;; +esac fi ac_ct_CC=$ac_cv_prog_ac_ct_CC @@ -3231,6 +3399,6 @@ then : printf %s "(cached) " >&6 -else $as_nop - if test -n "$CC"; then +else case e in #( + e) if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else @@ -3254,5 +3422,6 @@ IFS=$as_save_IFS -fi +fi ;; +esac fi CC=$ac_cv_prog_CC @@ -3276,6 +3445,6 @@ then : printf %s "(cached) " >&6 -else $as_nop - if test -n "$ac_ct_CC"; then +else case e in #( + e) if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else @@ -3299,5 +3468,6 @@ IFS=$as_save_IFS -fi +fi ;; +esac fi ac_ct_CC=$ac_cv_prog_ac_ct_CC @@ -3328,8 +3498,8 @@ -test -z "$CC" && { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;} +test -z "$CC" && { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 +printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } +See 'config.log' for more details" "$LINENO" 5; } # Provide some information about the compiler. @@ -3403,6 +3573,6 @@ test $ac_status = 0; } then : - # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' + # Autoconf-2.13 could set the ac_cv_exeext variable to 'no'. +# So ignore a value of 'no', otherwise this would lead to 'EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, # so that the user can short-circuit this test for compilers unknown to @@ -3424,5 +3594,5 @@ fi # We set ac_cv_exeext here because the later test for it is not - # safe: cross compilers may not add the suffix if given an `-o' + # safe: cross compilers may not add the suffix if given an '-o' # argument, so we may need to know it at that point already. # Even if this section looks crufty: it has the advantage of @@ -3435,6 +3605,7 @@ test "$ac_cv_exeext" = no && ac_cv_exeext= -else $as_nop - ac_file='' +else case e in #( + e) ac_file='' ;; +esac fi if test -z "$ac_file" @@ -3445,11 +3616,12 @@ sed 's/^/| /' conftest.$ac_ext >&5 -{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;} +{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 +printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} as_fn_error 77 "C compiler cannot create executables -See \`config.log' for more details" "$LINENO" 5; } -else $as_nop - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -printf "%s\n" "yes" >&6; } +See 'config.log' for more details" "$LINENO" 5; } +else case e in #( + e) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +printf "%s\n" "yes" >&6; } ;; +esac fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 @@ -3475,8 +3647,8 @@ test $ac_status = 0; } then : - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. + # If both 'conftest.exe' and 'conftest' are 'present' (well, observable) +# catch 'conftest.exe'. For instance with Cygwin, 'ls conftest' will +# work properly (i.e., refer to 'conftest.exe'), while it won't with +# 'rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue @@ -3488,9 +3660,10 @@ esac done -else $as_nop - { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;} +else case e in #( + e) { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 +printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details" "$LINENO" 5; } +See 'config.log' for more details" "$LINENO" 5; } ;; +esac fi rm -f conftest conftest$ac_cv_exeext @@ -3508,4 +3681,6 @@ { FILE *f = fopen ("conftest.out", "w"); + if (!f) + return 1; return ferror (f) || fclose (f) != 0; @@ -3547,9 +3722,9 @@ cross_compiling=yes else - { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;} + { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 +printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} as_fn_error 77 "cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details" "$LINENO" 5; } +If you meant to cross compile, use '--host'. +See 'config.log' for more details" "$LINENO" 5; } fi fi @@ -3558,5 +3733,6 @@ printf "%s\n" "$cross_compiling" >&6; } -rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +rm -f conftest.$ac_ext conftest$ac_cv_exeext \ + conftest.o conftest.obj conftest.out ac_clean_files=$ac_clean_files_save { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 @@ -3565,6 +3741,6 @@ then : printf %s "(cached) " >&6 -else $as_nop - cat confdefs.h - <<_ACEOF >conftest.$ac_ext +else case e in #( + e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ @@ -3598,14 +3774,16 @@ esac done -else $as_nop - printf "%s\n" "$as_me: failed program was:" >&5 +else case e in #( + e) printf "%s\n" "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;} +{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 +printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of object files: cannot compile -See \`config.log' for more details" "$LINENO" 5; } +See 'config.log' for more details" "$LINENO" 5; } ;; +esac fi -rm -f conftest.$ac_cv_objext conftest.$ac_ext +rm -f conftest.$ac_cv_objext conftest.$ac_ext ;; +esac fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 @@ -3618,6 +3796,6 @@ then : printf %s "(cached) " >&6 -else $as_nop - cat confdefs.h - <<_ACEOF >conftest.$ac_ext +else case e in #( + e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ @@ -3636,10 +3814,12 @@ then : ac_compiler_gnu=yes -else $as_nop - ac_compiler_gnu=no +else case e in #( + e) ac_compiler_gnu=no ;; +esac fi rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu - + ;; +esac fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 @@ -3659,6 +3839,6 @@ then : printf %s "(cached) " >&6 -else $as_nop - ac_save_c_werror_flag=$ac_c_werror_flag +else case e in #( + e) ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no @@ -3678,6 +3858,6 @@ then : ac_cv_prog_cc_g=yes -else $as_nop - CFLAGS="" +else case e in #( + e) CFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ @@ -3694,6 +3874,6 @@ then : -else $as_nop - ac_c_werror_flag=$ac_save_c_werror_flag +else case e in #( + e) ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext @@ -3712,10 +3892,13 @@ ac_cv_prog_cc_g=yes fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; +esac fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; +esac fi rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag + ac_c_werror_flag=$ac_save_c_werror_flag ;; +esac fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 @@ -3744,6 +3927,6 @@ then : printf %s "(cached) " >&6 -else $as_nop - ac_cv_prog_cc_c11=no +else case e in #( + e) ac_cv_prog_cc_c11=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext @@ -3762,5 +3945,6 @@ done rm -f conftest.$ac_ext -CC=$ac_save_CC +CC=$ac_save_CC ;; +esac fi @@ -3769,16 +3953,18 @@ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 printf "%s\n" "unsupported" >&6; } -else $as_nop - if test "x$ac_cv_prog_cc_c11" = x +else case e in #( + e) if test "x$ac_cv_prog_cc_c11" = x then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 printf "%s\n" "none needed" >&6; } -else $as_nop - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c11" >&5 +else case e in #( + e) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c11" >&5 printf "%s\n" "$ac_cv_prog_cc_c11" >&6; } - CC="$CC $ac_cv_prog_cc_c11" + CC="$CC $ac_cv_prog_cc_c11" ;; +esac fi ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c11 - ac_prog_cc_stdc=c11 + ac_prog_cc_stdc=c11 ;; +esac fi fi @@ -3790,6 +3976,6 @@ then : printf %s "(cached) " >&6 -else $as_nop - ac_cv_prog_cc_c99=no +else case e in #( + e) ac_cv_prog_cc_c99=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext @@ -3808,5 +3994,6 @@ done rm -f conftest.$ac_ext -CC=$ac_save_CC +CC=$ac_save_CC ;; +esac fi @@ -3815,16 +4002,18 @@ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 printf "%s\n" "unsupported" >&6; } -else $as_nop - if test "x$ac_cv_prog_cc_c99" = x +else case e in #( + e) if test "x$ac_cv_prog_cc_c99" = x then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 printf "%s\n" "none needed" >&6; } -else $as_nop - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c99" >&5 +else case e in #( + e) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c99" >&5 printf "%s\n" "$ac_cv_prog_cc_c99" >&6; } - CC="$CC $ac_cv_prog_cc_c99" + CC="$CC $ac_cv_prog_cc_c99" ;; +esac fi ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c99 - ac_prog_cc_stdc=c99 + ac_prog_cc_stdc=c99 ;; +esac fi fi @@ -3836,6 +4025,6 @@ then : printf %s "(cached) " >&6 -else $as_nop - ac_cv_prog_cc_c89=no +else case e in #( + e) ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext @@ -3854,5 +4043,6 @@ done rm -f conftest.$ac_ext -CC=$ac_save_CC +CC=$ac_save_CC ;; +esac fi @@ -3861,16 +4051,18 @@ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 printf "%s\n" "unsupported" >&6; } -else $as_nop - if test "x$ac_cv_prog_cc_c89" = x +else case e in #( + e) if test "x$ac_cv_prog_cc_c89" = x then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 printf "%s\n" "none needed" >&6; } -else $as_nop - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +else case e in #( + e) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 printf "%s\n" "$ac_cv_prog_cc_c89" >&6; } - CC="$CC $ac_cv_prog_cc_c89" + CC="$CC $ac_cv_prog_cc_c89" ;; +esac fi ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c89 - ac_prog_cc_stdc=c89 + ac_prog_cc_stdc=c89 ;; +esac fi fi @@ -3893,6 +4085,6 @@ then : printf %s "(cached) " >&6 -else $as_nop - cat confdefs.h - <<_ACEOF >conftest.$ac_ext +else case e in #( + e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ @@ -3924,5 +4116,6 @@ done rm -f core conftest* - unset am_i + unset am_i ;; +esac fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 @@ -4014,6 +4207,6 @@ then : printf %s "(cached) " >&6 -else $as_nop - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then +else case e in #( + e) if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For @@ -4102,5 +4295,5 @@ # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: + # When given -MP, icc 7.0 and 7.1 complain thus: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: @@ -4119,5 +4312,6 @@ am_cv_CC_dependencies_compiler_type=none fi - + ;; +esac fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 @@ -4157,6 +4351,6 @@ then : printf %s "(cached) " >&6 -else $as_nop - case $PKG_CONFIG in +else case e in #( + e) case $PKG_CONFIG in [\\/]* | ?:[\\/]*) ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. @@ -4183,4 +4377,5 @@ ;; +esac ;; esac fi @@ -4205,6 +4400,6 @@ then : printf %s "(cached) " >&6 -else $as_nop - case $ac_pt_PKG_CONFIG in +else case e in #( + e) case $ac_pt_PKG_CONFIG in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. @@ -4231,4 +4426,5 @@ ;; +esac ;; esac fi @@ -4271,4 +4467,7 @@ fi fi +if test -z "$PKG_CONFIG"; then + as_fn_error $? "pkg-config not found" "$LINENO" 5 +fi pkg_failed=no @@ -4409,6 +4608,6 @@ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 printf "%s\n" "no" >&6; } - { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;} + { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 +printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full @@ -4420,5 +4619,5 @@ To get pkg-config, see . -See \`config.log' for more details" "$LINENO" 5; } +See 'config.log' for more details" "$LINENO" 5; } else EFL_CFLAGS=$pkg_cv_EFL_CFLAGS @@ -4501,6 +4700,6 @@ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 printf "%s\n" "no" >&6; } - { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;} + { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 +printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full @@ -4512,5 +4711,5 @@ To get pkg-config, see . -See \`config.log' for more details" "$LINENO" 5; } +See 'config.log' for more details" "$LINENO" 5; } else LIBXML_CFLAGS=$pkg_cv_LIBXML_CFLAGS @@ -4533,6 +4732,6 @@ # the --recheck option to rerun configure. # -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the +# 'ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* 'ac_cv_foo' will be assigned the # following values. @@ -4564,5 +4763,5 @@ case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes: double-quote + # 'set' does not quote correctly, so add quotes: double-quote # substitution turns \\\\ into \\, and sed turns \\ into \. sed -n \ @@ -4571,5 +4770,5 @@ ;; #( *) - # `set' quotes correctly as required by POSIX, so do not add quotes. + # 'set' quotes correctly as required by POSIX, so do not add quotes. sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; @@ -4640,4 +4839,16 @@ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: done" >&5 printf "%s\n" "done" >&6; } +case $enable_silent_rules in # ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; +esac +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi + if test -n "$EXEEXT"; then am__EXEEXT_TRUE= @@ -4685,5 +4896,4 @@ # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh -as_nop=: if test ${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1 then : @@ -4694,10 +4904,11 @@ alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST -else $as_nop - case `(set -o) 2>/dev/null` in #( +else case e in #( + e) case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; +esac ;; esac fi @@ -4771,5 +4982,5 @@ ;; esac -# We did not find ourselves, most probably we were run as `sh COMMAND' +# We did not find ourselves, most probably we were run as 'sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then @@ -4800,5 +5011,4 @@ - # as_fn_set_status STATUS # ----------------------- @@ -4840,9 +5050,10 @@ eval $1+=\$2 }' -else $as_nop - as_fn_append () +else case e in #( + e) as_fn_append () { eval $1=\$$1\$2 - } + } ;; +esac fi # as_fn_append @@ -4858,9 +5069,10 @@ as_val=$(( $* )) }' -else $as_nop - as_fn_arith () +else case e in #( + e) as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` - } + } ;; +esac fi # as_fn_arith @@ -4945,7 +5157,7 @@ as_ln_s='ln -s' # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -pR'. + # 1) On MSYS, both 'ln -s file dir' and 'ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; 'ln -s' creates a wrapper executable. + # In both cases, we have to default to 'cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' @@ -5028,8 +5240,10 @@ # Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" +as_sed_cpp="y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" +as_tr_cpp="eval sed '$as_sed_cpp'" # deprecated # Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" +as_sed_sh="y%*+%pp%;s%[^_$as_cr_alnum]%_%g" +as_tr_sh="eval sed '$as_sed_sh'" # deprecated @@ -5047,5 +5261,5 @@ ac_log=" This file was extended by eradio $as_me 0.0.13, which was -generated by GNU Autoconf 2.71. Invocation command line was +generated by GNU Autoconf 2.72. Invocation command line was CONFIG_FILES = $CONFIG_FILES @@ -5079,5 +5293,5 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ -\`$as_me' instantiates files and other configuration actions +'$as_me' instantiates files and other configuration actions from templates according to the current configuration. Unless the files and actions are specified as TAGs, all are instantiated by default. @@ -5115,8 +5329,8 @@ ac_cs_version="\\ eradio config.status 0.0.13 -configured by $0, generated by GNU Autoconf 2.71, +configured by $0, generated by GNU Autoconf 2.72, with options \\"\$ac_cs_config\\" -Copyright (C) 2021 Free Software Foundation, Inc. +Copyright (C) 2023 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." @@ -5180,6 +5394,6 @@ --he | --h) # Conflict between --help and --header - as_fn_error $? "ambiguous option: \`$1' -Try \`$0 --help' for more information.";; + as_fn_error $? "ambiguous option: '$1' +Try '$0 --help' for more information.";; --help | --hel | -h ) printf "%s\n" "$ac_cs_usage"; exit ;; @@ -5189,6 +5403,6 @@ # This is an error. - -*) as_fn_error $? "unrecognized option: \`$1' -Try \`$0 --help' for more information." ;; + -*) as_fn_error $? "unrecognized option: '$1' +Try '$0 --help' for more information." ;; *) as_fn_append ac_config_targets " $1" @@ -5249,5 +5463,5 @@ "data/Makefile") CONFIG_FILES="$CONFIG_FILES data/Makefile" ;; - *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + *) as_fn_error $? "invalid argument: '$ac_config_target'" "$LINENO" 5;; esac done @@ -5269,5 +5483,5 @@ # Hook for its removal unless debugging. # Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. +# after its creation but before its name has been assigned to '$tmp'. $debug || { @@ -5293,5 +5507,5 @@ # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. -# This happens for instance with `./config.status config.h'. +# This happens for instance with './config.status config.h'. if test -n "$CONFIG_FILES"; then @@ -5451,5 +5665,5 @@ # Set up the scripts for CONFIG_HEADERS section. # No need to generate them if there are no CONFIG_HEADERS. -# This happens for instance with `./config.status Makefile'. +# This happens for instance with './config.status Makefile'. if test -n "$CONFIG_HEADERS"; then cat >"$ac_tmp/defines.awk" <<\_ACAWK || @@ -5457,5 +5671,5 @@ _ACEOF -# Transform confdefs.h into an awk script `defines.awk', embedded as +# Transform confdefs.h into an awk script 'defines.awk', embedded as # here-document in config.status, that substitutes the proper values into # config.h.in to produce config.h. @@ -5567,5 +5781,5 @@ case $ac_mode$ac_tag in :[FHL]*:*);; - :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :L* | :C*:*) as_fn_error $? "invalid tag '$ac_tag'" "$LINENO" 5;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; @@ -5589,5 +5803,5 @@ *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. + # because $ac_f cannot contain ':'. test -f "$ac_f" || case $ac_f in @@ -5595,5 +5809,5 @@ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || - as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + as_fn_error 1 "cannot find input file: '$ac_f'" "$LINENO" 5;; esac case $ac_f in *\'*) ac_f=`printf "%s\n" "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac @@ -5601,5 +5815,5 @@ done - # Let's still pretend it is `configure' which instantiates (i.e., don't + # Let's still pretend it is 'configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ @@ -5734,5 +5948,5 @@ _ACEOF -# Neutralize VPATH when `$srcdir' = `.'. +# Neutralize VPATH when '$srcdir' = '.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? @@ -5765,7 +5979,7 @@ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ "$ac_tmp/out"`; test -z "$ac_out"; } && - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable 'datarootdir' which seems to be undefined. Please make sure it is defined" >&5 -printf "%s\n" "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +printf "%s\n" "$as_me: WARNING: $ac_file contains a reference to the variable 'datarootdir' which seems to be undefined. Please make sure it is defined" >&2;} @@ -5922,6 +6136,6 @@ done if test $am_rc -ne 0; then - { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;} + { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 +printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} as_fn_error $? "Something went wrong bootstrapping makefile fragments for automatic dependency tracking. If GNU make was not used, consider @@ -5930,5 +6144,5 @@ '--disable-dependency-tracking' option to at least be able to build the package (albeit without support for automatic dependency tracking). -See \`config.log' for more details" "$LINENO" 5; } +See 'config.log' for more details" "$LINENO" 5; } fi { am_dirpart=; unset am_dirpart;} diff -U2 -r /var/lib/copr-rpmbuild/results/eradio/upstream-unpacked/Source0/eradio-0.0.13/data/Makefile.in /var/lib/copr-rpmbuild/results/eradio/srpm-unpacked/eradio-0.0.13.tar.gz-extract/eradio-0.0.13/data/Makefile.in --- /var/lib/copr-rpmbuild/results/eradio/upstream-unpacked/Source0/eradio-0.0.13/data/Makefile.in 2025-10-17 00:03:47.000000000 +0000 +++ /var/lib/copr-rpmbuild/results/eradio/srpm-unpacked/eradio-0.0.13.tar.gz-extract/eradio-0.0.13/data/Makefile.in 2025-10-17 00:01:17.000000000 +0000 @@ -1,6 +1,6 @@ -# Makefile.in generated by automake 1.16.5 from Makefile.am. +# Makefile.in generated by automake 1.17 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2021 Free Software Foundation, Inc. +# Copyright (C) 1994-2024 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation @@ -71,4 +71,6 @@ am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +am__rm_f = rm -f $(am__rm_f_notfound) +am__rm_rf = rm -rf $(am__rm_f_notfound) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ @@ -138,8 +140,7 @@ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ - test -z "$$files" \ - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ - $(am__cd) "$$dir" && rm -f $$files; }; \ + { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && echo $$files | $(am__xargs_n) 40 $(am__rm_f); }; \ } am__installdirs = "$(DESTDIR)$(desktopdir)" "$(DESTDIR)$(iconsdir)" @@ -209,6 +210,8 @@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ +am__rm_f_notfound = @am__rm_f_notfound@ am__tar = @am__tar@ am__untar = @am__untar@ +am__xargs_n = @am__xargs_n@ bindir = @bindir@ build_alias = @build_alias@ @@ -393,6 +396,6 @@ distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + -$(am__rm_f) $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @@ -485,2 +488,9 @@ # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: + +# Tell GNU make to disable its built-in pattern rules. +%:: %,v +%:: RCS/%,v +%:: RCS/% +%:: s.% +%:: SCCS/s.% diff -U2 -r /var/lib/copr-rpmbuild/results/eradio/upstream-unpacked/Source0/eradio-0.0.13/depcomp /var/lib/copr-rpmbuild/results/eradio/srpm-unpacked/eradio-0.0.13.tar.gz-extract/eradio-0.0.13/depcomp --- /var/lib/copr-rpmbuild/results/eradio/upstream-unpacked/Source0/eradio-0.0.13/depcomp 2025-10-17 00:03:47.000000000 +0000 +++ /var/lib/copr-rpmbuild/results/eradio/srpm-unpacked/eradio-0.0.13.tar.gz-extract/eradio-0.0.13/depcomp 2025-10-12 13:36:04.000000000 +0000 @@ -2,7 +2,7 @@ # depcomp - compile a program generating dependencies as side-effects -scriptversion=2018-03-07.03; # UTC +scriptversion=2024-06-19.01; # UTC -# Copyright (C) 1999-2021 Free Software Foundation, Inc. +# Copyright (C) 1999-2024 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify @@ -48,9 +48,11 @@ Report bugs to . +GNU Automake home page: . +General help using GNU software: . EOF exit $? ;; -v | --v*) - echo "depcomp $scriptversion" + echo "depcomp (GNU Automake) $scriptversion" exit $? ;; @@ -114,5 +116,4 @@ upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ lower=abcdefghijklmnopqrstuvwxyz -digits=0123456789 alpha=${upper}${lower} @@ -129,5 +130,5 @@ rm -f "$tmpdepfile" -# Avoid interferences from the environment. +# Avoid interference from the environment. gccflag= dashmflag= @@ -199,6 +200,6 @@ gcc) -## Note that this doesn't just cater to obsosete pre-3.x GCC compilers. -## but also to in-use compilers like IMB xlc/xlC and the HP C compiler. +## Note that this doesn't just cater to obsolete pre-3.x GCC compilers. +## but also to in-use compilers like IBM xlc/xlC and the HP C compiler. ## (see the conditional assignment to $gccflag above). ## There are various ways to get dependency output from gcc. Here's diff -U2 -r /var/lib/copr-rpmbuild/results/eradio/upstream-unpacked/Source0/eradio-0.0.13/install-sh /var/lib/copr-rpmbuild/results/eradio/srpm-unpacked/eradio-0.0.13.tar.gz-extract/eradio-0.0.13/install-sh --- /var/lib/copr-rpmbuild/results/eradio/upstream-unpacked/Source0/eradio-0.0.13/install-sh 2025-10-17 00:03:47.000000000 +0000 +++ /var/lib/copr-rpmbuild/results/eradio/srpm-unpacked/eradio-0.0.13.tar.gz-extract/eradio-0.0.13/install-sh 2025-10-12 13:36:04.000000000 +0000 @@ -2,5 +2,5 @@ # install - install a program, script, or datafile -scriptversion=2020-11-14.01; # UTC +scriptversion=2024-06-19.01; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was @@ -125,7 +125,7 @@ If -S is not specified, no backups are attempted. -Email bug reports to bug-automake@gnu.org. -Automake home page: https://www.gnu.org/software/automake/ -" +Report bugs to . +GNU Automake home page: . +General help using GNU software: ." while test $# -ne 0; do @@ -171,5 +171,5 @@ -T) is_target_a_directory=never;; - --version) echo "$0 $scriptversion"; exit $?;; + --version) echo "$0 (GNU Automake) $scriptversion"; exit $?;; --) shift @@ -346,5 +346,5 @@ # Because "mkdir -p" follows existing symlinks and we likely work - # directly in world-writeable /tmp, make sure that the '$tmpdir' + # directly in world-writable /tmp, make sure that the '$tmpdir' # directory is successfully created first before we actually test # 'mkdir -p'. @@ -354,5 +354,5 @@ then if test -z "$dir_arg" || { - # Check for POSIX incompatibilities with -m. + # Check for POSIX incompatibility with -m. # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or # other-writable bit of parent directory when it shouldn't. diff -U2 -r /var/lib/copr-rpmbuild/results/eradio/upstream-unpacked/Source0/eradio-0.0.13/missing /var/lib/copr-rpmbuild/results/eradio/srpm-unpacked/eradio-0.0.13.tar.gz-extract/eradio-0.0.13/missing --- /var/lib/copr-rpmbuild/results/eradio/upstream-unpacked/Source0/eradio-0.0.13/missing 2025-10-17 00:03:47.000000000 +0000 +++ /var/lib/copr-rpmbuild/results/eradio/srpm-unpacked/eradio-0.0.13.tar.gz-extract/eradio-0.0.13/missing 2025-10-12 13:36:04.000000000 +0000 @@ -1,8 +1,10 @@ #! /bin/sh -# Common wrapper for a few potentially missing GNU programs. +# Common wrapper for a few potentially missing GNU and other programs. -scriptversion=2018-03-07.03; # UTC +scriptversion=2024-06-07.14; # UTC -# Copyright (C) 1996-2021 Free Software Foundation, Inc. +# shellcheck disable=SC2006,SC2268 # we must support pre-POSIX shells + +# Copyright (C) 1996-2024 Free Software Foundation, Inc. # Originally written by Fran,cois Pinard , 1996. @@ -55,16 +57,18 @@ Supported PROGRAM values: - aclocal autoconf autoheader autom4te automake makeinfo - bison yacc flex lex help2man +aclocal autoconf autogen autoheader autom4te automake autoreconf +bison flex help2man lex makeinfo perl yacc Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and 'g' are ignored when checking the name. -Send bug reports to ." +Report bugs to . +GNU Automake home page: . +General help using GNU software: ." exit $? ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) - echo "missing $scriptversion (GNU Automake)" + echo "missing (GNU Automake) $scriptversion" exit $? ;; @@ -109,5 +113,5 @@ { case $1 in - aclocal|automake) + aclocal|automake|autoreconf) echo "The '$1' program is part of the GNU Automake package:" echo "<$gnu_software_URL/automake>" @@ -124,4 +128,7 @@ echo "<$perl_URL>" ;; + *) + : + ;; esac } @@ -138,29 +145,36 @@ configure_deps="'configure.ac' or m4 files included by 'configure.ac'" + autoheader_deps="'acconfig.h'" + automake_deps="'Makefile.am'" + aclocal_deps="'acinclude.m4'" case $normalized_program in + aclocal*) + echo "You should only need it if you modified $aclocal_deps or" + echo "$configure_deps." + ;; autoconf*) - echo "You should only need it if you modified 'configure.ac'," - echo "or m4 files included by it." - program_details 'autoconf' + echo "You should only need it if you modified $configure_deps." + ;; + autogen*) + echo "You should only need it if you modified a '.def' or '.tpl' file." + echo "You may want to install the GNU AutoGen package:" + echo "<$gnu_software_URL/autogen/>" ;; autoheader*) - echo "You should only need it if you modified 'acconfig.h' or" + echo "You should only need it if you modified $autoheader_deps or" echo "$configure_deps." - program_details 'autoheader' ;; automake*) - echo "You should only need it if you modified 'Makefile.am' or" - echo "$configure_deps." - program_details 'automake' - ;; - aclocal*) - echo "You should only need it if you modified 'acinclude.m4' or" + echo "You should only need it if you modified $automake_deps or" echo "$configure_deps." - program_details 'aclocal' ;; - autom4te*) + autom4te*) echo "You might have modified some maintainer files that require" echo "the 'autom4te' program to be rebuilt." - program_details 'autom4te' + ;; + autoreconf*) + echo "You should only need it if you modified $aclocal_deps or" + echo "$automake_deps or $autoheader_deps or $automake_deps or" + echo "$configure_deps." ;; bison*|yacc*) @@ -169,9 +183,4 @@ echo "<$gnu_software_URL/bison/>" ;; - lex*|flex*) - echo "You should only need it if you modified a '.l' file." - echo "You may want to install the Fast Lexical Analyzer package:" - echo "<$flex_URL>" - ;; help2man*) echo "You should only need it if you modified a dependency" \ @@ -180,4 +189,9 @@ echo "<$gnu_software_URL/help2man/>" ;; + lex*|flex*) + echo "You should only need it if you modified a '.l' file." + echo "You may want to install the Fast Lexical Analyzer package:" + echo "<$flex_URL>" + ;; makeinfo*) echo "You should only need it if you modified a '.texi' file, or" @@ -190,4 +204,10 @@ echo "<$gnu_software_URL/make/>" ;; + perl*) + echo "You should only need it to run GNU Autoconf, GNU Automake, " + echo " assorted other tools, or if you modified a Perl source file." + echo "You may want to install the Perl 5 language interpreter:" + echo "<$perl_URL>" + ;; *) echo "You might have modified some files without having the proper" @@ -198,4 +218,5 @@ ;; esac + program_details "$normalized_program" } diff -U2 -r /var/lib/copr-rpmbuild/results/eradio/upstream-unpacked/Source0/eradio-0.0.13/src/Makefile.in /var/lib/copr-rpmbuild/results/eradio/srpm-unpacked/eradio-0.0.13.tar.gz-extract/eradio-0.0.13/src/Makefile.in --- /var/lib/copr-rpmbuild/results/eradio/upstream-unpacked/Source0/eradio-0.0.13/src/Makefile.in 2025-10-17 00:03:47.000000000 +0000 +++ /var/lib/copr-rpmbuild/results/eradio/srpm-unpacked/eradio-0.0.13.tar.gz-extract/eradio-0.0.13/src/Makefile.in 2025-10-17 00:01:17.000000000 +0000 @@ -1,6 +1,6 @@ -# Makefile.in generated by automake 1.16.5 from Makefile.am. +# Makefile.in generated by automake 1.17 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2021 Free Software Foundation, Inc. +# Copyright (C) 1994-2024 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation @@ -71,4 +71,6 @@ am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +am__rm_f = rm -f $(am__rm_f_notfound) +am__rm_rf = rm -rf $(am__rm_f_notfound) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ @@ -231,6 +233,8 @@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ +am__rm_f_notfound = @am__rm_f_notfound@ am__tar = @am__tar@ am__untar = @am__untar@ +am__xargs_n = @am__xargs_n@ bindir = @bindir@ build_alias = @build_alias@ @@ -342,8 +346,8 @@ test -n "$$list" || exit 0; \ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(bindir)" && rm -f $$files + cd "$(DESTDIR)$(bindir)" && $(am__rm_f) $$files clean-binPROGRAMS: - -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) + -$(am__rm_f) $(bin_PROGRAMS) eradio$(EXEEXT): $(eradio_OBJECTS) $(eradio_DEPENDENCIES) $(EXTRA_eradio_DEPENDENCIES) @@ -366,5 +370,5 @@ $(am__depfiles_remade): @$(MKDIR_P) $(@D) - @echo '# dummy' >$@-t && $(am__mv) $@-t $@ + @: >>$@ am--depfiles: $(am__depfiles_remade) @@ -583,6 +587,6 @@ distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + -$(am__rm_f) $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @@ -594,5 +598,5 @@ distclean: distclean-am - -rm -f ./$(DEPDIR)/eradio-favorites.Po + -rm -f ./$(DEPDIR)/eradio-favorites.Po -rm -f ./$(DEPDIR)/eradio-http.Po -rm -f ./$(DEPDIR)/eradio-main.Po @@ -645,5 +649,5 @@ maintainer-clean: maintainer-clean-am - -rm -f ./$(DEPDIR)/eradio-favorites.Po + -rm -f ./$(DEPDIR)/eradio-favorites.Po -rm -f ./$(DEPDIR)/eradio-http.Po -rm -f ./$(DEPDIR)/eradio-main.Po @@ -690,2 +694,9 @@ # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: + +# Tell GNU make to disable its built-in pattern rules. +%:: %,v +%:: RCS/%,v +%:: RCS/% +%:: s.% +%:: SCCS/s.%