Summary: Initial system configuration utility Name: initial-setup URL: https://fedoraproject.org/wiki/InitialSetup Version: 0.3.95 Release: 1.20220720170456422593.master.1.g084118e%{?dist} # This is a Red Hat maintained package which is specific to # our distribution. # # The source is thus available only from within this SRPM # or via direct git checkout: # git clone https://github.com/rhinstaller/initial-setup Source0: initial-setup-0.3.95.tar.gz %define debug_package %{nil} %define anacondaver 37.8-1 License: GPLv2+ BuildRequires: gettext BuildRequires: python3-devel BuildRequires: python3-setuptools BuildRequires: systemd-units BuildRequires: gtk3-devel BuildRequires: glade-devel BuildRequires: intltool BuildRequires: make Requires: %{__python3} Requires: anaconda-tui >= %{anacondaver} Requires: python3-simpleline >= 1.4 Requires: systemd >= 235 Requires(post): systemd Requires(preun): systemd Requires(postun): systemd Requires: util-linux Conflicts: firstboot < 19.2 %description The initial-setup utility runs after installation. It guides the user through a series of steps that allows for easier configuration of the machine. %package gui Summary: Graphical user interface for the initial-setup utility Requires: gtk3 Requires: anaconda-gui >= %{anacondaver} Requires: firstboot(windowmanager) Requires: xorg-x11-xinit Requires: xorg-x11-server-Xorg Requires: %{name} = %{version}-%{release} %description gui The initial-setup-gui package contains a graphical user interface for the initial-setup utility. %prep %autosetup -p 1 -n initial-setup-0.3.95 # remove upstream egg-info rm -rf *.egg-info %build make %install rm -rf %{buildroot} make DESTDIR=%{buildroot} install %find_lang %{name} %clean rm -rf %{buildroot} %post %systemd_post initial-setup.service %preun %systemd_preun initial-setup.service %postun %systemd_postun initial-setup.service %files -f %{name}.lang %doc README.rst ChangeLog %license COPYING %{python3_sitelib}/initial_setup* %exclude %{python3_sitelib}/initial_setup/gui %{_libexecdir}/%{name}/run-initial-setup %{_libexecdir}/%{name}/firstboot-windowmanager %{_libexecdir}/%{name}/initial-setup-text %{_libexecdir}/%{name}/reconfiguration-mode-enabled %{_unitdir}/initial-setup.service %{_unitdir}/initial-setup-reconfiguration.service %dir %{_sysconfdir}/%{name} %dir %{_sysconfdir}/%{name}/conf.d %config %{_sysconfdir}/%{name}/conf.d/* %ifarch s390 s390x %{_sysconfdir}/profile.d/initial-setup.sh %{_sysconfdir}/profile.d/initial-setup.csh %endif %files gui %{_libexecdir}/%{name}/initial-setup-graphical %{python3_sitelib}/initial_setup/gui/ %changelog * Wed Jul 20 2022 Packit - 0.3.95-1.20220720170456422593.master.1.g084118e - Fixup version in setup.py (Martin Kolman) * Wed Jul 20 2022 Martin Kolman - 0.3.95-1 - Use Anaconda DBus read-write properties (vponcova) * Tue Oct 12 2021 Martin Kolman - 0.3.94-1 - Remove the default_help_pages configuration option (vponcova) - Add the configuration files to the updates image (vponcova) - Remove the helpFile attribute (vponcova) - Specify unique screen ids (vponcova) - Apply suggestions from code review (martin.kolman) - Fix ownership of the gui folder (#1812463) (mkolman) - Don't show the EULA spoke if the license file doesn't exist (vponcova) * Mon Jul 12 2021 Martin Kolman - 0.3.93-1 - Use profiles instead of product configuration files (vponcova) - Change the Python version to 3.10 in the makeupdates script (vponcova) * Thu Jun 24 2021 Martin Kolman - 0.3.92-1 - Fixup version in setup.py (mkolman) - Add gnome-kiosk to window managers usable by initial-setup (rvykydal) - Add copr builds also for branched Fedora (jkonecny) * Tue Apr 27 2021 Martin Kolman - 0.3.91-1 - Disable multi TTY handler when running in SSH session (mkolman) - Add CLI option to disable multi TTY handler (mkolman) * Tue Mar 30 2021 Martin Kolman - 0.3.90-1 - Remove old failing pre scriptlet (mkolman) * Tue Mar 23 2021 Martin Kolman - 0.3.89-1 - Include scripts in the updates image (vponcova) - Drop build time dependency on the anaconda package (mkolman) * Mon Feb 22 2021 Martin Kolman - 0.3.88-1 - Load the product configuration files (vponcova) - Clean up the code (vponcova) * Mon Feb 15 2021 Martin Kolman - 0.3.87-1 - Add BuildRequires: make (tstellar) - Fixup version number in setup.py (mkolman) * Fri Feb 12 2021 Martin Kolman - 0.3.86-1 - Drop python-nose from the dependencies (#1916799) (vponcova) - Add the makeupdates script (vponcova) - Remove deprecated support for add-ons (vponcova) - Don't run installation tasks of add-ons in a meta task (vponcova) - Migrate COPR builds from Jenkins to Packit (jkonecny) - Add documentation for the new test solution (jkonecny) - Add support for custom Anaconda COPR repository (jkonecny) - Use `make test` to run TMT tests locally (jkonecny) - Add TMT configuration to get Anaconda COPR build (jkonecny) - Add Packit support for initial-setup (jkonecny) - Update and use setup.py for archive creation (jkonecny) - Fix ChangeLog generation in Makefile (jkonecny) * Mon Dec 07 2020 Martin Kolman - 0.3.85-1 - Adapt to category title translation fix in Anaconda (mkolman) * Tue Oct 27 2020 Martin Kolman - 0.3.84-1 - Adjust to logging command changes in Anaconda (#1891621) (mkolman) - Make sure the output from custom_getpass() is serialized after stdout (lkundrak) * Wed Aug 19 2020 Martin Kolman - 0.3.83-1 - Add PEP8 Speaks configuration (mkolman) - Remove hard coded name of the translation repo in tmp (jkonecny) - Update README.rst (mkolman) - Add missing branch config to manifest file (jkonecny) - Add COPR daily builds badge (jkonecny) * Mon Jun 08 2020 Martin Kolman - 0.3.82-1 - Add translation badge to the README file (jkonecny) - Remove unused PREFIX variable from Makefile (jkonecny) - Use new po-push instead of Zanata (jkonecny) - Add po-push using localization repository (jkonecny) - Use translation repository to pull the translations (jkonecny) * Fri May 22 2020 Martin Kolman - 0.3.81-1 - Use macro for Python 3 requirement in spec file (mkolman) - Remove outdated dependency on python3-libreport (vslavik) - Fix a typo in Zanata CLI invocation (mkolman) * Tue Dec 10 2019 Martin Kolman - 0.3.80-1 - Do not call a task which has been moved into install keyboard task (rvykydal) - Adapt to changes in localization module (rvykydal) - Fix Zanata client detection in Makefile (mkolman) * Mon Nov 18 2019 Martin Kolman - 0.3.79-1 - Fix import of the DBus launcher (vponcova) * Tue Nov 12 2019 Martin Kolman - 0.3.78-1 - Revert "Fix import of the DBus launcher" (martin.kolman) - Run the installation tasks of the DBus addons (vponcova) - Run the installation tasks of the Timezone module (vponcova) - Fix import of the DBus launcher (vponcova) * Thu Oct 24 2019 Martin Kolman - 0.3.77-1 - Run the installation tasks of the Localization module (vponcova) - Use new DBus support for reading a kickstart file (vponcova) - Use autosetup instead of setup (mkolman) - Bump Anaconda version due to networking changes (mkolman) * Fri Oct 04 2019 Martin Kolman - 0.3.76-1 - Fix configuration of network hostname (#1757960) (rvykydal) * Thu Oct 03 2019 Martin Kolman - 0.3.75-1 - Blacklist some USB consoles from multi-TTY handler (#1755580) (mkolman) * Wed Sep 18 2019 Martin Kolman - 0.3.74-1 - Fix typo in reconfig mode detection (#1752554) (mkolman) * Wed Jul 31 2019 Martin Kolman - 0.3.73-1 - Remove system root from DBus calls (vponcova) - Correct the name for libreport Python3 require (mkutlak) * Thu Jun 20 2019 Martin Kolman - 0.3.72-1 - Set physical and system roots in the configuration file (vponcova) - Write Anaconda logs to journal (vponcova) - Read configuration files from /etc/initial-setup/conf.d (#1713506) (vponcova) * Thu Jun 13 2019 Martin Kolman - 0.3.71-1 - Don't initialize the screen access manager (vponcova) * Wed May 15 2019 Martin Kolman - 0.3.70-1 - Adjust to changes in the Users DBus module (mkolman) * Thu Apr 04 2019 Martin Kolman - 0.3.69-1 - Adapt to removal of ifcfg.log (#1695967) (rvykydal) * Tue Mar 12 2019 Martin Kolman - 0.3.68-1 - Remove obsolete Group definition from the spec file (mkolman) - Initialize network module (device configurations) (#1685992) (rvykydal) - Specify the type of the installation system (#1685992) (vponcova) * Tue Mar 12 2019 Martin Kolman - 0.3.67-1 - Update arguments of the execute methods (#1666849) (vponcova) * Mon Jan 21 2019 Martin Kolman - 0.3.66-1 - Don't call initThreading (#1666849) (vponcova) * Thu Jan 03 2019 Martin Kolman - 0.3.65-1 - Remove install classes from the initial setup (vponcova) * Mon Nov 19 2018 Martin Kolman - 0.3.64-1 - Handle simpleline having an empty stack (mkolman) * Mon Nov 05 2018 Martin Kolman - 0.3.63-1 - Disable modules in the configuration file (vponcova) - Let the DBus launcher to set up the modules (vponcova) - README.rst: update link to anaconda addon dev guide (kenyon) * Fri Jul 27 2018 Martin Kolman - 0.3.62-1 - Make EULA spoke name compatible with three column hub (mkolman) - Blacklist the ptmx console from multi-tty use (mkolman) - Add support for showing an EULA spoke (mkolman) - Add explicit dependency on X server for the GUI sub-package (mkolman) * Wed May 09 2018 Martin Kolman - 0.3.61-1 - Fix the users module import (#1575650) (mkolman) * Fri May 04 2018 Martin Kolman - 0.3.60-1 - Fix name of the Zanata Python client package (mkolman) - Use the Anaconda default for DBUS module timeout (mkolman) * Mon Apr 23 2018 Martin Kolman - 0.3.59-1 - Fix version number in setup.py (mkolman) * Thu Apr 19 2018 Martin Kolman - 0.3.58-1 - Run only the supported kickstart modules (#1566621) (vponcova) * Tue Apr 10 2018 Martin Kolman - 0.3.57-1 - Adapt to a new Simpleline input handling (jkonecny) * Mon Mar 19 2018 Martin Kolman - 0.3.56-1 - Adjust to Hub behavior change (mkolman) - Apply the Anaconda modularization changes (vponcova) * Mon Mar 05 2018 Martin Kolman - 0.3.55-1 - Handle kickstart commands provided by DBUS modules (mkolman) - Adapt to changes in starting Boss (mkolman) * Wed Feb 28 2018 Martin Kolman - 0.3.54-1 - Start and stop Boss (mkolman) - New version 0.3.53 (mkolman) - Add common function for finding bugreport URL (riehecky) * Fri Jan 19 2018 Martin Kolman - 0.3.53-1 - Fix imports after Anaconda refactoring (jkonecny) - Return correct code at startup script success/failure (mkolman) * Wed Nov 29 2017 Martin Kolman - 0.3.52-1 - Use getty-pre.target to prevent getty from running (mkolman) * Thu Oct 05 2017 Martin Kolman - 0.3.51-1 - Don't print directory changes when outputting the changelog (mkolman) - Automate release creation (mkolman) - Don't include merges in the spec file changelog (mkolman) - Update initial-setup-reconfiguration.service too, add another (mvebu) serial console (pbrobinson) - Add some more serial console options for ARM (pbrobinson) * Mon Sep 11 2017 Martin Kolman - 0.3.50-1 - Use constant+offset when turning systemd console logging on/off (mkolman) - Add some more serial console options (pbrobinson) * Wed Aug 30 2017 Martin Kolman - 0.3.49-1 - Use new Simpleline package (jkonecny) - Remove unused import (jkonecny) - add yet another ARM serial console (sjenning) * Wed Jul 12 2017 Martin Kolman - 0.3.48-1 - Fix Anaconda threading import name (#1469776) (mkolman) * Fri Jun 02 2017 Martin Kolman - 0.3.47-1 - Adapt to anaconda_log module name change (mkolman) * Wed May 24 2017 Martin Kolman - 0.3.46-2 - Drop Anaconda version bump for now (mkolman) * Wed May 24 2017 Martin Kolman - 0.3.46-1 - Add support for password entry from arbitrary consoles (#1438046) (mkolman) * Wed May 17 2017 Martin Kolman - 0.3.45-1 - Remove stdin & stdout definition from unit files (#1438046) (mkolman) * Mon May 15 2017 Martin Kolman - 0.3.44-1 - Run the Initial Setup TUI on all usable consoles (#1438046) (mkolman) * Wed Sep 21 2016 Martin Kolman - 0.3.43-1 - Initialize SAM on startup (#1375721) (mkolman) - Log unhandled exceptions to Journal (mkolman) - Suppress logging to stdout when TUI is started by s390 startup scripts (mkolman) - Fix path to TUI executable in the s390 startup scripts (#1366776) (mkolman) - Canonicalize symlinks returned by readlink (mkolman) * Fri Aug 05 2016 Martin Kolman - 0.3.42-1 - Fix a typo (mkolman) - Don't run the GUI on text-only systems (#1360343) (mkolman) * Wed Jun 08 2016 Martin Kolman - 0.3.41-1 - Fix reconfiguration service name (mkolman) - Fix installation path for the reconfiguration-mode-enabled script (mkolman) - Use the environs flag when setting the environment (mkolman) - Some typo fixes and logging improvements (mkolman) - Add a systemd service that enables Initial Setup if /.unconfigured exists (#1257624) (mkolman) - Adapt to addon execute() signature change (mkolman) - Replace hardcoded python3 call by a variable (mkolman) - Nicer systemctl calls (mkolman) - Use systemd-cat also for the run-initial-setup script (mkolman) - Remove a redundant Requires: line (mkolman) - Fix a typo (mkolman) - Run correct systemd scriptlets (mkolman) - Use systemd-cat for logging to the journal (mkolman) * Thu Mar 24 2016 Martin Kolman - 0.3.40-1 - Use blank title for the Initial Setup window (mkolman) - Start the window manager correctly (#1160891) (mkolman) - Fix some rpmlint warnings (mkolman) * Tue Feb 16 2016 Martin Kolman - 0.3.39-1 - Disable the correct service on successful completion (#1298725) (mkolman) * Tue Dec 01 2015 Martin Kolman - 0.3.38-1 - Make Initial Setup startup more robust (mkolman) - Move the s390 profile scripts to a subfolder (mkolman) - Improve log messages for kickstart parsing error (mkolman) * Wed Sep 30 2015 Martin Kolman - 0.3.37-1 - Stop any Initial Setup services before upgrading package (#1244394) (mkolman) - Replace systemd_postun_with_restart with systemd_postun (#1244394) (mkolman) - Fix 'bumpver' make target (vtrefny) - Add archive target to Makefile (vtrefny) * Mon Aug 31 2015 Martin Kolman - 0.3.36-1 - Setup the locale before starting the UI (dshea) - Run the TUI service before hvc0.service (#1209731) (mkolman) - Don't create /etc/sysconfig/initial-setup on s390 (#1181209) (mkolman) - Use systemd service status for run detection on S390 console (#1181209) (mkolman) - Read the kickstart from previous IS run, if available (#1110439) (mkolman) - Add support for externally triggered reconfig mode (#1110439) (mkolman) - Log the reason if GUI import fails (#1229747) (mkolman) * Thu Jul 30 2015 Martin Kolman - 0.3.35-1 - Fix a typo in Makefile (#1244558) (mkolman) * Thu Jul 30 2015 Martin Kolman - 0.3.34-1 - Switch Initial Setup to Python 3 (#1244558) (mkolman) * Thu Apr 23 2015 Martin Kolman - 0.3.33-1 - Improve the Makefile (mkolman) - Remove old GUI testing code from the Makefile (mkolman) - Update upstream URL (#1213101) (mkolman) - Update upstream Git repository URL (mkolman) * Tue Mar 31 2015 Martin Kolman - 0.3.32-1 - Point out the err in case that ks parsing failed (#1145130) (fabiand) - Switch to Zanata for translations (mkolman) * Wed Mar 04 2015 Martin Kolman - 0.3.31-1 - Use kwin_x11 for kde/plasma spin (#1197135) (rdieter) * Fri Feb 13 2015 Martin Kolman - 0.3.29-1 - Split scriptlets for the gui subpackage (mkolman) - Use /usr/bin/python2 in scripts (mkolman) * Thu Feb 05 2015 Martin Kolman - 0.3.28-1 - Fix breakage caused by README file rename (mkolman) * Thu Feb 05 2015 Martin Kolman - 0.3.27-1 - Remove unneeded dependencies (mkolman) - Add the rst suffix to the README file (mkolman) - Update the link to the upstream source code repository (mkolman) - Add AnacondaKSHandler no-member error to pylint-false-positives. (mulhern) - Mark strings for translation when module is loaded. (mulhern) - Fix easy pylint errors. (mulhern) - Add pylint testing infrastructure. (mulhern) * Mon Nov 3 2014 Martin Kolman - 0.3.26-1 - Explicitly require the main package in the GUI sub package (#1078917) (mkolman) * Thu Oct 23 2014 Martin Kolman - 0.3.25-1 - Add syslog logging support (#1145122) (mkolman) * Fri Oct 10 2014 Martin Kolman - 0.3.24-1 - Fix Initial Setup to correctly support the Anaconda built-in Help (#1072033) (mkolman) - Populate README (#1110178) (master-log) (mkolman) - Remove the --disable-overwrite parameter for the Transifex client (mkolman) * Fri Aug 08 2014 Martin Kolman - 0.3.23-1 - Adapt to class changes in Anaconda (vpodzime) * Fri Jul 04 2014 Martin Kolman - 0.3.22-1 - Update the initial-setup hub for the new HubWindow API (dshea) * Sat May 31 2014 Peter Robinson 0.3.21-2 - Only the GUI needs a window manager * Wed May 28 2014 Martin Kolman - 0.3.21-1 - Adapt to python-nose API change (mkolman) * Thu May 22 2014 Martin Kolman - 0.3.20-1 - Adapt Initial Setup to the new way Anaconda handles root path (#1099581) (vpodzime) * Tue May 06 2014 Martin Kolman - 0.3.19-1 - Bump required Anaconda version due to TUI category handling change (mkolman) - Override Hub collect methods also in TUI hub (mkolman) - Translation update * Mon Apr 28 2014 Martin Kolman - 0.3.18-1 - Remove debugging code that was left in the tarball by mistake (#1091470) (mkolman) - Translation update * Fri Apr 11 2014 Martin Kolman - 0.3.17-1 - Set initial-setup translation domain for the hub (#1040240) (mkolman) * Thu Apr 03 2014 Martin Kolman - 0.3.16-1 - initial-setup-gui requires the initial-setup package (vpodzime) * Wed Mar 19 2014 Martin Kolman - 0.3.15-1 - Import the product module (#1077390) (vpodzime) * Tue Feb 11 2014 Vratislav Podzimek - 0.3.14-1 - Try to quit plymouth before running our X server instance (#1058329) - Get rid of the empty debuginfo package (#1062738) * Wed Feb 05 2014 Vratislav Podzimek - 0.3.13-1 - Make Initial Setup an arch specific package (#1057590) (vpodzime) * Thu Nov 28 2013 Vratislav Podzimek - 0.3.12-1 - Adapt to changes in anaconda tui spoke categories (#1035462) (vpodzime) - Ignore the SIGINT (#1035590) (vpodzime) * Wed Nov 20 2013 Vratislav Podzimek - 0.3.11-1 - Fix how spokes are collected for the I-S main hub (vpodzime) - Override distribution text in spokes (#1028370) (vpodzime) - Get rid of the useless modules directory (vpodzime) - Split GUI code into a separate package (#999464) (vpodzime) - Fallback to text UI if GUI is not available (vpodzime) * Tue Nov 05 2013 Vratislav Podzimek - 0.3.10-1 - Do not try to kill unexisting process (vpodzime) - Add some logging to our shell scripts (vpodzime) * Thu Sep 26 2013 Vratislav Podzimek - 0.3.9-1 - Yet another serial console in ARMs (#1007163) (vpodzime) - Fix the base mask of initial_setup gui submodules (vpodzime) - Specify and use environment of the main hub (vpodzime) * Tue Sep 10 2013 Vratislav Podzimek - 0.3.8-1 - Read /etc/os-release to get product title (#1000426) (vpodzime) - Don't let product_title() return None (vpodzime) - Apply the timezone and NTP configuration (#985566) (hdegoede) - Make handling translations easier (vpodzime) - Make translations work (vpodzime) - Sync changelog with downstream (vpodzime) * Tue Aug 27 2013 Vratislav Podzimek - 0.3.7-1 - Prevent getty on various services killing us (#979174) (vpodzime) - Initialize network logging for the network spoke (vpodzime) * Sat Aug 03 2013 Fedora Release Engineering - 0.3.6-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild * Tue Jun 18 2013 Vratislav Podzimek - 0.3.6-2 - Rebuild with dependencies available. * Tue Jun 18 2013 Vratislav Podzimek - 0.3.6-1 - Make serial-getty wait for us as well (#970719) (vpodzime) - Disable the service only on successful exit (#967617) (vpodzime) * Wed May 22 2013 Vratislav Podzimek - 0.3.5-1 - Reference the new repository in the .spec file (vpodzime) - Prevent systemd services from running on live images (#962196) (awilliam) - Don't traceback if the expected kickstart file doesn't exist (#950796) (vpodzime) * Mon Apr 8 2013 Vratislav Podzimek - 0.3.4-3 - Rebuild with fixed spec that partly reverts the previous change * Fri Apr 5 2013 Vratislav Podzimek - 0.3.4-2 - Rebuild with fixed spec that enables services after installation * Thu Mar 28 2013 Martin Sivak - 0.3.4-1 - Search for proper UI variant of addons - Add addon directories to sys.path * Tue Mar 26 2013 Martin Sivak - 0.3.3-1 - Systemd unit files improved * Tue Mar 26 2013 Martin Sivak - 0.3.2-1 - Modify the ROOT_PATH properly - Do not execute old ksdata (from anaconda's ks file) - Save the resulting configuration to /root/initial-setup-ks.cfg * Tue Mar 26 2013 Martin Sivak - 0.3.1-2 - Require python-di package * Thu Mar 21 2013 Martin Sivak - 0.3.1-1 - Use updated Anaconda API - Request firstboot environment spokes - Initialize anaconda threading properly * Wed Mar 13 2013 Martin Sivak - 0.3-1 - Use updated Anaconda API - Fix systemd units - Add localization spokes to TUI - Write changes to disk - Conflict with old firstboot * Wed Feb 13 2013 Martin Sivak 0.2-1 - Updates for package review - Firstboot-windowmanager script * Wed Feb 13 2013 Martin Sivak 0.1-3 - Updates for package review * Tue Jan 22 2013 Martin Sivak 0.1-2 - Updates for package review * Tue Nov 06 2012 Martin Sivak 0.1-1 - Initial release