## START: Set by rpmautospec ## (rpmautospec version 0.2.5) %define autorelease(e:s:pb:) %{?-p:0.}%{lua: release_number = 3; base_release_number = tonumber(rpm.expand("%{?-b*}%{!?-b:1}")); print(release_number + base_release_number - 1); }%{?-e:.%{-e*}}%{?-s:.%{-s*}}%{?dist} ## END: Set by rpmautospec # We need to use C++17 to link against the system abseil-cpp, or we get linker # errors. %global cpp_std 17 # However, we also get linker errors building the tests if we link against the # copy of gtest in Fedora (compiled with C++11). The exact root cause is not # quite clear. We must therefore bundle a copy of gtest in the source RPM # rather than using the system copy. This is to be discouraged, but there is no # alternative in this case. It is not treated as a bundled library because it # is used only at build time, and contributes nothing to the installed files. # We take measures to verify this in %%check. %global gtest_version 1.11.0 %bcond_with system_gtest # Bootstrapping breaks the circular dependency on python3dist(xds-protos), # which is packaged separately but ultimately generated from grpc sources using # the proto compilers in this package; the consequence is that we cannot build # the python3-grpcio-admin or python3-grpcio-csds subpackages until after # bootstrapping. %bcond_with bootstrap # This must be enabled to get grpc_cli, which is apparently considered part of # the tests by upstream. This is mentioned in # https://github.com/grpc/grpc/issues/23432. %bcond_without core_tests # A great many of these tests (over 20%) fail. Any help in understanding these # well enough to fix them or report them upstream is welcome. %bcond_with python_aio_tests %ifnarch s390x %bcond_without python_gevent_tests %else # A signficant number of Python tests pass in test_lite but fail in # test_gevent, mostly by dumping core without a traceback. Since it is tedious # to enumerate these (and it is difficult to implement “suite-specific” skips # for shared tests, so the tests would have to be skipped in all suites), we # just skip the gevent suite entirely on this architecture. %bcond_with python_gevent_tests %endif # HTML documentation generated with Doxygen and/or Sphinx is not suitable for # packaging due to a minified JavaScript bundle inserted by # Doxygen/Sphinx/Sphinx themes itself. See discussion at # https://bugzilla.redhat.com/show_bug.cgi?id=2006555. # # Normally we could consider enabling the Doxygen PDF documentation as a lesser # substitute, but (after enabling it and working around some Unicode characters # in the Markdown input) we get: # # ! TeX capacity exceeded, sorry [main memory size=6000000]. # # A similar situation applies to the Sphinx-generated HTML documentation for # Python, except that we have not even tried to render it as a PDF because it # is too unpleasant to try if we already cannot package the Doxygen-generated # documentation. Instead, we have just dropped all documentation. Name: grpc Version: 1.41.1 Release: %autorelease Summary: RPC library and framework # CMakeLists.txt: gRPC_CORE_SOVERSION %global c_so_version 19 # CMakeLists.txt: gRPC_CPP_SOVERSION %global cpp_so_version 1.41 # CMakeLists.txt: gRPC_CSHARP_SOVERSION %global csharp_so_version 2.41 # See https://github.com/abseil/abseil-cpp/issues/950#issuecomment-843169602 # regarding unusual SOVERSION style (not a single number). # The entire source is ASL 2.0 except the following: # # BSD: # - third_party/upb/, except third_party/upb/third_party/lunit/ # * Potentially linked into any compiled subpackage (but not pure-Python # subpackages, etc.) # - third_party/address_sorting/ # * Potentially linked into any compiled subpackage (but not pure-Python # subpackages, etc.) # # as well as the following which do not contribute to the base License field or # any subpackage License field for the reasons noted: # # MPLv2.0: # - etc/roots.pem # * Truncated to an empty file in prep; a symlink to the shared system # certificates is used instead # - src/android/test/interop/app/src/main/assets/roots.pem # * Truncated to an empty file in prep # ISC: # - src/boringssl/crypto_test_data.cc and src/boringssl/err_data.c # * Removed in prep; not used when building with system OpenSSL # BSD: # - src/objective-c/*.podspec and # templates/src/objective-c/*.podspec.template # * Unused since the Objective-C bindings are not currently built # MIT: # - third_party/cares/ares_build.h # * Removed in prep; header from system C-Ares used instead # - third_party/rake-compiler-dock/ # * Removed in prep, since we build no containers # - third_party/upb/third_party/lunit/ # * Removed in prep, since there is no obvious way to run the upb tests License: ASL 2.0 and BSD URL: https://www.grpc.io %global forgeurl https://github.com/grpc/grpc/ # Used only at build time (not a bundled library); see notes at definition of # gtest_version macro for explanation and justification. %global gtest_url https://github.com/google/googletest %global gtest_archivename googletest-release-%{gtest_version} Source0: %{forgeurl}/archive/v%{version}/grpc-%{version}.tar.gz Source1: %{gtest_url}/archive/release-%{gtest_version}/%{gtest_archivename}.tar.gz # Downstream grpc_cli man pages; hand-written based on “grpc_cli help” output. Source100: grpc_cli.1 Source101: grpc_cli-ls.1 Source102: grpc_cli-call.1 Source103: grpc_cli-type.1 Source104: grpc_cli-parse.1 Source105: grpc_cli-totext.1 Source106: grpc_cli-tojson.1 Source107: grpc_cli-tobinary.1 Source108: grpc_cli-help.1 # ~~~~ C (core) and C++ (cpp) ~~~~ BuildRequires: gcc-c++ BuildRequires: cmake BuildRequires: ninja-build %if %{with core_tests} # Used on grpc_cli: BuildRequires: chrpath %endif BuildRequires: pkgconfig(zlib) BuildRequires: cmake(gflags) BuildRequires: pkgconfig(protobuf) BuildRequires: protobuf-compiler BuildRequires: pkgconfig(re2) BuildRequires: pkgconfig(openssl) BuildRequires: cmake(c-ares) BuildRequires: abseil-cpp-devel # Sets XXH_INCLUDE_ALL, which means xxhash is used as a header-only library BuildRequires: pkgconfig(libxxhash) BuildRequires: xxhash-static # Header-only C library, which we unbundle from the bundled copy of upb BuildRequires: wyhash_final1-devel BuildRequires: wyhash_final1-static %if %{with core_tests} BuildRequires: cmake(benchmark) %if %{with system_gtest} BuildRequires: cmake(gtest) BuildRequires: pkgconfig(gmock) %endif %endif # ~~~~ Python ~~~~ BuildRequires: python3-devel BuildRequires: python3dist(setuptools) # grpcio (setup.py) setup_requires (with # GRPC_PYTHON_ENABLE_DOCUMENTATION_BUILD, which is NOT enabled): # BuildRequires: python3dist(sphinx) # grpcio (setup.py) setup_requires (with # GRPC_PYTHON_ENABLE_DOCUMENTATION_BUILD, which is NOT enabled): # grpcio_tests (src/python/grpcio_tests/setup.py) install_requires: BuildRequires: python3dist(six) >= 1.10 # grpcio (setup.py) install_requires also has: # six>=1.5.2 # grpcio (setup.py) setup_requires (with GRPC_PYTHON_BUILD_WITH_CYTHON, or # absent generated sources); also needed for grpcio_tools # (tools/distrib/python/grpcio_tools/setup.py) BuildRequires: python3dist(cython) > 0.23 # grpcio (setup.py) install_requires: # grpcio_tests (src/python/grpcio_tests/setup.py) install_requires: # futures>=2.2.0; python_version<'3.2' # grpcio (setup.py) install_requires: # grpcio_tests (src/python/grpcio_tests/setup.py) install_requires: # enum34>=1.0.4; python_version<'3.4' # grpcio_csds (src/python/grpcio_csds/setup.py) install_requires: # grpcio_channelz (src/python/grpcio_channelz/setup.py) install_requires: # grpcio_health_checking (src/python/grpcio_health_checking/setup.py) # install_requires: # grpcio_reflection (src/python/grpcio_reflection/setup.py) install_requires: # grpcio_status (src/python/grpcio_status/setup.py) install_requires: # grpcio_testing (src/python/grpcio_testing/setup.py) install_requires: # grpcio_tests (src/python/grpcio_tests/setup.py) install_requires: BuildRequires: python3dist(protobuf) >= 3.6.0 # grpcio_tools (tools/distrib/python/grpcio_tools/setup.py) install_requires # also has: # protobuf>=3.5.0.post1 # which is written as # python3dist(protobuf) >= 3.5^post1 # grpcio_status (src/python/grpcio_status/setup.py) install_requires: BuildRequires: python3dist(googleapis-common-protos) >= 1.5.5 %if %{without bootstrap} # grpcio_csds (src/python/grpcio_csds/setup.py) install_requires BuildRequires: python3dist(xds-protos) >= 0.0.7 %endif # Several packages have dependencies on grpcio or grpcio_tools—and grpcio-tests # depends on all of the other Python packages—which are satisfied within this # package. # # Similarly, grpcio_admin depends on grpcio_channelz and grpcio_csds. # grpcio_tests (src/python/grpcio_tests/setup.py) install_requires: BuildRequires: python3dist(coverage) >= 4.0 # grpcio_tests (src/python/grpcio_tests/setup.py) install_requires: BuildRequires: python3dist(oauth2client) >= 1.4.7 # grpcio_tests (src/python/grpcio_tests/setup.py) install_requires: BuildRequires: python3dist(google-auth) >= 1.17.2 # grpcio_tests (src/python/grpcio_tests/setup.py) install_requires: BuildRequires: python3dist(requests) >= 2.14.2 # Required for “test_gevent” tests: BuildRequires: python3dist(gevent) # For stopping the port server BuildRequires: curl # ~~~~ Miscellaneous ~~~~ # https://bugzilla.redhat.com/show_bug.cgi?id=1893533 %global _lto_cflags %{nil} # Reference documentation, which is *not* enabled # BuildRequires: doxygen BuildRequires: ca-certificates # For converting absolute symlinks in the buildroot to relative ones BuildRequires: symlinks # Apply Fedora system crypto policies. Since this is Fedora-specific, the patch # is not suitable for upstream. # https://docs.fedoraproject.org/en-US/packaging-guidelines/CryptoPolicies/#_cc_applications # # In fact, this may not be needed, since only testing code is patched. Patch0: grpc-1.39.0-system-crypto-policies.patch # Add an option GRPC_PYTHON_BUILD_SYSTEM_ABSL to go with the gRPC_ABSL_PROVIDER # option already provided upstream. See # https://github.com/grpc/grpc/issues/25559. Patch1: grpc-1.40.0-python-grpcio-use-system-abseil.patch # Fix errors like: # TypeError: super(type, obj): obj must be an instance or subtype of type # It is not clear why these occur. Patch2: grpc-1.36.4-python-grpcio_tests-fixture-super.patch # Skip tests requiring non-loopback network access when the # FEDORA_NO_NETWORK_TESTS environment variable is set. Patch3: grpc-1.40.0-python-grpcio_tests-make-network-tests-skippable.patch # A handful of compression tests miss the compression ratio threshold. It seems # to be inconsistent which particular combinations fail in a particular test # run. It is not clear that this is a real problem. Any help in understanding # the actual cause well enough to fix this or usefully report it upstream is # welcome. Patch4: grpc-1.36.4-python-grpcio_tests-skip-compression-tests.patch # The upstream requirement to link gtest/gmock from grpc_cli is spurious. # Remove it. We still have to build the core tests and link a test library # (libgrpc++_test_config.so…) Patch5: grpc-1.37.0-grpc_cli-do-not-link-gtest-gmock.patch # Fix confusion about path to python_wrapper.sh in httpcli/httpscli tests. I # suppose that the unpatched code must be correct for how upstream runs the # tests, somehow. Patch6: grpc-1.39.0-python_wrapper-path.patch # Port Python 2 scripts used in core tests to Python 3 Patch7: grpc-1.40.0-python2-test-scripts.patch # Fix compatibility with breaking changes in google-benchmark 1.6.0 # # This will not be sent upstream since it is impractical to make a patch # compatible with both 1.6.0 and 1.5.0, and upstream has not yet updated to # 1.6.0. Patch8: grpc-1.40.0-google-benchmark-1.6.0.patch # In src/core/lib/promise/detail/basic_seq.h, include cassert # https://github.com/grpc/grpc/pull/27516 Patch9: https://github.com/grpc/grpc/pull/27516.patch Requires: grpc-data = %{version}-%{release} # Upstream https://github.com/protocolbuffers/upb does not support building # with anything other than Bazel, and Bazel is not likely to make it into # Fedora anytime soon due to its nightmarish collection of dependencies. # Monitor this at https://bugzilla.redhat.com/show_bug.cgi?id=1470842. # Therefore upb cannot be packaged for Fedora, and we must use the bundled # copy. # # Note that upstream has never chosen a version, and it is not clear from which # commit the bundled copy was taken or forked. # # Note also that libupb is installed in the system-wide linker path, which will # be a problem if upb is ever packaged separately. We will cross that bridge if # we get there. Provides: bundled(upb) # Regarding third_party/address_sorting: this looks a bit like a bundled # library, but it is not. From a source file comment: # This is an adaptation of Android's implementation of RFC 6724 (in Android’s # getaddrinfo.c). It has some cosmetic differences from Android’s # getaddrinfo.c, but Android’s getaddrinfo.c was used as a guide or example # of a way to implement the RFC 6724 spec when this was written. %description gRPC is a modern open source high performance RPC framework that can run in any environment. It can efficiently connect services in and across data centers with pluggable support for load balancing, tracing, health checking and authentication. It is also applicable in last mile of distributed computing to connect devices, mobile applications and browsers to backend services. The main usage scenarios: • Efficiently connecting polyglot services in microservices style architecture • Connecting mobile devices, browser clients to backend services • Generating efficient client libraries Core Features that make it awesome: • Idiomatic client libraries in 10 languages • Highly efficient on wire and with a simple service definition framework • Bi-directional streaming with http/2 based transport • Pluggable auth, tracing, load balancing and health checking This package provides the shared C core library. %package data Summary: Data for gRPC bindings License: ASL 2.0 BuildArch: noarch Requires: ca-certificates %description data Common data for gRPC bindings: currently, this contains only a symbolic link to the system shared TLS certificates. %package doc Summary: Documentation and examples for gRPC License: ASL 2.0 BuildArch: noarch Obsoletes: python-grpcio-doc < 1.26.0-13 Provides: python-grpcio-doc = %{version}-%{release} Provides: python-grpcio-admin-doc = %{version}-%{release} Provides: python-grpcio-csds-doc = %{version}-%{release} Provides: python-grpcio-channelz-doc = %{version}-%{release} Provides: python-grpcio-health-checking-doc = %{version}-%{release} Provides: python-grpcio-reflection-doc = %{version}-%{release} Provides: python-grpcio-status-doc = %{version}-%{release} Provides: python-grpcio-testing-doc = %{version}-%{release} %description doc Documentation and examples for gRPC, including Markdown documentation sources for the following: • C (core) ○ API ○ Internals • C++ ○ API ○ Internals • Objective C ○ API ○ Internals • Python ○ grpcio ○ grpcio_admin ○ grpcio_csds ○ grpcio_channelz ○ grpcio_health_checking ○ grpcio_reflection ○ grpcio_status ○ grpcio_testing For rendered HTML documentation, please see https://grpc.io/docs/. %package cpp Summary: C++ language bindings for gRPC # License: same as base package Requires: grpc%{?_isa} = %{version}-%{release} %description cpp C++ language bindings for gRPC. %package plugins Summary: Protocol buffers compiler plugins for gRPC # License: same as base package Requires: grpc%{?_isa} = %{version}-%{release} Requires: protobuf-compiler %description plugins Plugins to the protocol buffers compiler to generate gRPC sources. %package cli Summary: Command-line tool for gRPC # License: same as base package Requires: grpc%{?_isa} = %{version}-%{release} %description cli The command line tool can do the following things: • Send unary rpc. • Attach metadata and display received metadata. • Handle common authentication to server. • Infer request/response types from server reflection result. • Find the request/response types from a given proto file. • Read proto request in text form. • Read request in wire form (for protobuf messages, this means serialized binary form). • Display proto response in text form. • Write response in wire form to a file. %package devel Summary: Development files for gRPC library # License: same as base package Requires: grpc%{?_isa} = %{version}-%{release} Requires: grpc-cpp%{?_isa} = %{version}-%{release} Requires: cmake-filesystem # grpc/impl/codegen/port_platform.h includes linux/version.h Requires: kernel-headers%{?_isa} # grpcpp/impl/codegen/config_protobuf.h includes google/protobuf/… Requires: pkgconfig(protobuf) # grpcpp/test/mock_stream.h includes gmock/gmock.h Requires: pkgconfig(gmock) # grpcpp/impl/codegen/sync.h includes absl/synchronization/mutex.h # grpc.pc has -labsl_[…] Requires: abseil-cpp-devel%{?_isa} # grpc.pc has -lre2 Requires: pkgconfig(re2) # grpc.pc has -lcares Requires: cmake(c-ares) # grpc.pc has -lz Requires: pkgconfig(zlib) # Library name conflict for %%{_libdir}/libgpr.so MUST be removed per # guidelines, but until a plan can be devised, we make the conflict explicit. # # https://bugzilla.redhat.com/show_bug.cgi?id=2017576 Conflicts: libgpr %description devel Development headers and files for gRPC libraries (both C and C++). %package -n python3-grpcio Summary: Python language bindings for gRPC # License: same as base package # Note that the Python package has no runtime dependency on the base C library; # everything it needs is bundled. Requires: grpc-data = %{version}-%{release} %description -n python3-grpcio Python language bindings for gRPC (HTTP/2-based RPC framework). %global grpcio_egg %{python3_sitearch}/grpcio-%{version}-py%{python3_version}.egg-info %{?python_extras_subpkg:%python_extras_subpkg -n python3-grpcio -i %{grpcio_egg} protobuf} %package -n python3-grpcio-tools Summary: Package for gRPC Python tools # License: same as base package %description -n python3-grpcio-tools Package for gRPC Python tools. %if %{without bootstrap} %package -n python3-grpcio-admin Summary: A collection of admin services License: ASL 2.0 BuildArch: noarch %description -n python3-grpcio-admin gRPC Python Admin Interface Package =================================== Debugging gRPC library can be a complex task. There are many configurations and internal states, which will affect the behavior of the library. This Python package will be the collection of admin services that are exposing debug information. Currently, it includes: * Channel tracing metrics (grpcio-channelz) * Client Status Discovery Service (grpcio-csds) Here is a snippet to create an admin server on "localhost:50051": server = grpc.server(ThreadPoolExecutor()) port = server.add_insecure_port('localhost:50051') grpc_admin.add_admin_servicers(self._server) server.start() Welcome to explore the admin services with CLI tool "grpcdebug": https://github.com/grpc-ecosystem/grpcdebug. For any issues or suggestions, please send to https://github.com/grpc/grpc/issues. %endif %if %{without bootstrap} %package -n python3-grpcio-csds Summary: xDS configuration dump library License: ASL 2.0 BuildArch: noarch %description -n python3-grpcio-csds gRPC Python Client Status Discovery Service package =================================================== CSDS is part of the Envoy xDS protocol: https://www.envoyproxy.io/docs/envoy/latest/api-v3/service/status/v3/csds.proto. It allows the gRPC application to programmatically expose the received traffic configuration (xDS resources). Welcome to explore with CLI tool "grpcdebug": https://github.com/grpc-ecosystem/grpcdebug. For any issues or suggestions, please send to https://github.com/grpc/grpc/issues. %endif %package -n python3-grpcio-channelz Summary: Channel Level Live Debug Information Service for gRPC License: ASL 2.0 BuildArch: noarch %description -n python3-grpcio-channelz gRPC Python Channelz package ============================ Channelz is a live debug tool in gRPC Python. %package -n python3-grpcio-health-checking Summary: Standard Health Checking Service for gRPC License: ASL 2.0 BuildArch: noarch %description -n python3-grpcio-health-checking gRPC Python Health Checking =========================== Reference package for GRPC Python health checking. %package -n python3-grpcio-reflection Summary: Standard Protobuf Reflection Service for gRPC License: ASL 2.0 BuildArch: noarch %description -n python3-grpcio-reflection gRPC Python Reflection package ============================== Reference package for reflection in GRPC Python. %package -n python3-grpcio-status Summary: Status proto mapping for gRPC License: ASL 2.0 BuildArch: noarch %description -n python3-grpcio-status gRPC Python Status Proto =========================== Reference package for GRPC Python status proto mapping. %package -n python3-grpcio-testing Summary: Testing utilities for gRPC Python License: ASL 2.0 BuildArch: noarch %description -n python3-grpcio-testing gRPC Python Testing Package =========================== Testing utilities for gRPC Python. %prep %autosetup -p1 echo '===== Patching grpcio_tools for system protobuf =====' 2>&1 # Build python3-grpcio_tools against system protobuf packages instead of # expecting a git submodule. Must also add requisite linker flags using # GRPC_PYTHON_LDFLAGS. This was formerly done by # grpc-VERSION-python-grpcio_tools-use-system-protobuf.patch, but it had to be # tediously but trivially rebased every patch release as the CC_FILES list # changed, so we automated the patch. sed -r -i \ -e "s/^(# AUTO-GENERATED .*)/\\1\\n\ # Then, modified by hand to build with an external system protobuf\ # installation./" \ -e 's/^(CC_FILES=\[).*(\])/\1\2/' \ -e "s@^((CC|PROTO)_INCLUDE=')[^']+'@\1%{_includedir}'@" \ -e '/^PROTOBUF_SUBMODULE_VERSION=/d' \ 'tools/distrib/python/grpcio_tools/protoc_lib_deps.py' echo '===== Preparing gtest/gmock =====' 2>&1 %if %{without system_gtest} # Copy in the needed gtest/gmock implementations. %setup -q -T -D -b 1 rm -rvf 'third_party/googletest' mv '../%{gtest_archivename}' 'third_party/googletest' %else # Patch CMakeLists for external gtest/gmock. # # 1. Create dummy sources, adding a typedef so the translation unit is not # empty, rather than removing references to these sources from # CMakeLists.txt. This is so that we do not end up with executables with no # sources, only libraries, which is a CMake error. # 2. Either remove references to the corresponding include directories, or # create the directories and leave them empty. # 3. “Stuff” the external library into the target_link_libraries() for each # test by noting that GMock/GTest/GFlags are always used together. for gwhat in test mock do mkdir -p "third_party/googletest/google${gwhat}/src" \ "third_party/googletest/google${gwhat}/include" echo "typedef int dummy_${gwhat}_type;" \ > "third_party/googletest/google${gwhat}/src/g${gwhat}-all.cc" done sed -r -i 's/^([[:blank:]]*)(\$\{_gRPC_GFLAGS_LIBRARIES\})/'\ '\1\2\n\1gtest\n\1gmock/' CMakeLists.txt %endif echo '===== Removing bundled wyhash =====' 2>&1 # Remove bundled wyhash (via upb); to avoid patching the build system, simply # use a symlink to find the system copy. This is sufficient since it is a # header-only library. rm -rvf third_party/upb/third_party/wyhash ln -s %{_includedir}/wyhash_final1/ third_party/upb/third_party/wyhash echo '===== Removing bundled xxhash =====' 2>&1 # Remove bundled xxhash rm -rvf third_party/xxhash # Since grpc sets XXH_INCLUDE_ALL wherever it uses xxhash, it is using xxhash # as a header-only library. This means we can replace it with the system copy # by doing nothing further; xxhash.h is in the system include path and will be # found instead, and there are no linker flags to add. See also # https://github.com/grpc/grpc/issues/25945. echo '===== Fixing permissions =====' 2>&1 # https://github.com/grpc/grpc/pull/27069 find . -type f -perm /0111 \ -exec gawk '!/^#!/ { print FILENAME }; { nextfile }' '{}' '+' | xargs -r chmod -v a-x echo '===== Removing selected unused sources =====' 2>&1 # Remove unused sources that have licenses not in the License field, to ensure # they are not accidentally used in the build. See the comment above the base # package License field for more details. rm -rfv \ src/boringssl/*.c src/boringssl/*.cc \ third_party/cares/ares_build.h \ third_party/rake-compiler-dock \ third_party/upb/third_party/lunit # Since we are replacing roots.pem with a symlink to the shared system # certificates, we do not include its license (MPLv2.0) in any License field. # We remove its contents so that, if we make a packaging mistake, we will have # a bug but not an incorrect License field. echo '' > etc/roots.pem # Remove Android sources and examples. We do not need these on Linux, and they # have some issues that will be flagged when reviewing the package, such as: # - Another copy of the MPLv2.0-licensed certificate bundle from # etc/roots.pem, in src/android/test/interop/app/src/main/assets/roots.pem # - Pre-built jar files at # src/android/test/interop/gradle/wrapper/gradle-wrapper.jar and # examples/android/helloworld/gradle/wrapper/gradle-wrapper.jar rm -rvf examples/android src/android # Remove unwanted .gitignore files, generally in examples. One could argue that # a sample .gitignore file is part of the example, but, well, we’re not going # to do that. find . -type f -name .gitignore -print -delete echo '===== Fixing shebangs =====' 2>&1 # Find executables with /usr/bin/env shebangs in the examples, and fix them. find . -type f -perm /0111 -exec gawk \ '/^#!\/usr\/bin\/env[[:blank:]]/ { print FILENAME }; { nextfile }' \ '{}' '+' | xargs -r sed -r -i '1{s|^(#!/usr/bin/)env[[:blank:]]+([^[:blank:]]+)|\1\2|}' \ echo '===== Fixing hard-coded C++ standard =====' 2>&1 # We need to adjust the C++ standard to avoid abseil-related linker errors. For # the main C++ build, we can use CMAKE_CXX_STANDARD. For extensions, examples, # etc., we must patch. sed -r -i 's/(std=c\+\+)11/\1%{cpp_std}/g' \ setup.py grpc.gyp Rakefile \ examples/cpp/*/Makefile \ examples/cpp/*/CMakeLists.txt \ tools/run_tests/artifacts/artifact_targets.py \ tools/distrib/python/grpcio_tools/setup.py echo '===== Fixing .pc install path =====' 2>&1 # Fix the install path for .pc files # https://github.com/grpc/grpc/issues/25635 sed -r -i 's|lib(/pkgconfig)|\${gRPC_INSTALL_LIBDIR}\1|' CMakeLists.txt echo '===== Patching to skip certain broken tests =====' 2>&1 %ifarch %{ix86} %{arm32} # Confirmed in 1.41.0 2021-10-01 (in %%{arm32} only) # TODO figure out how to report this upstream in a useful/actionable way sed -r -i "s/^([[:blank:]]*)(def test_concurrent_stream_stream)\\b/\ \\1@unittest.skip('May hang unexplainedly')\\n\\1\\2/" \ 'src/python/grpcio_tests/tests/testing/_client_test.py' %endif %ifarch %{ix86} %{arm32} # Confirmed in 1.41.0 2021-10-05 # These tests fail with: # OverflowError: Python int too large to convert to C ssize_t # TODO figure out how to report this upstream in a useful/actionable way sed -r -i \ "s/^([[:blank:]]*)(def test(SSLSessionCacheLRU|SessionResumption))\\b/\ \\1@unittest.skip('Unexplained overflow error on 32-bit')\\n\\1\\2/" \ 'src/python/grpcio_tests/tests/unit/_auth_context_test.py' \ 'src/python/grpcio_tests/tests/unit/_session_cache_test.py' %endif # Confirmed in 1.41.0 2021-10-08 (on aarch64 and s390x) # These tests can be flaky and may fail only sometimes. Failures have been seen # on all architectures. # TODO figure out how to report this upstream in a useful/actionable way sed -r -i "s/^([[:blank:]]*)(def testConcurrent(Blocking|Future)\ Invocations)\\b/\\1@unittest.skip('May hang unexplainedly')\\n\\1\\2/" \ 'src/python/grpcio_tests/tests/unit/_rpc_part_2_test.py' %ifarch %{arm64} ppc64le s390x x86_64 # Confirmed in 1.41.0 2021-10-05 (aarch64 and ppc64le) # This is flaky and often succeeds. # TODO figure out how to report this upstream in a useful/actionable way # # unit._dynamic_stubs_test.DynamicStubTest.test_grpc_tools_unimportable # traceback: # Traceback (most recent call last): # File "/usr/lib64/python3.10/unittest/case.py", line 59, in testPartExecutor # yield # File "/usr/lib64/python3.10/unittest/case.py", line 592, in run # self._callTestMethod(testMethod) # File "/usr/lib64/python3.10/unittest/case.py", line 549, in _callTestMethod # method() # File # "/builddir/build/BUILD/grpc-1.39.0/src/python/grpcio_tests/tests/unit/_dynamic_stubs_test.py", # line 136, in test_grpc_tools_unimportable # _run_in_subprocess(_test_grpc_tools_unimportable) # File # "/builddir/build/BUILD/grpc-1.39.0/src/python/grpcio_tests/tests/unit/_dynamic_stubs_test.py", # line 80, in _run_in_subprocess # assert proc.exitcode == 0, "Process exited with code {}".format( # AssertionError: Process exited with code 64 sed -r -i "s/^([[:blank:]]*)(class DynamicStubTest)\\b/\ \\1@unittest.skip('Child process exits with code 64')\\n\\1\\2/" \ 'src/python/grpcio_tests/tests/unit/_dynamic_stubs_test.py' %endif %ifarch %{arm64} ppc64le s390x x86_64 # Confirmed in 1.41.0 2021-10-05 (aarch64) # This is flaky and often succeeds. # TODO figure out how to report this upstream in a useful/actionable way # # unit._logging_test.LoggingTest.test_can_configure_logger # traceback: # Traceback (most recent call last): # File "/usr/lib64/python3.10/unittest/case.py", line 59, in testPartExecutor # yield # File "/usr/lib64/python3.10/unittest/case.py", line 592, in run # self._callTestMethod(testMethod) # File "/usr/lib64/python3.10/unittest/case.py", line 549, in _callTestMethod # method() # File # "/builddir/build/BUILD/grpc-1.39.0/src/python/grpcio_tests/tests/unit/_logging_test.py", # line 66, in test_can_configure_logger # self._verifyScriptSucceeds(script) # File # "/builddir/build/BUILD/grpc-1.39.0/src/python/grpcio_tests/tests/unit/_logging_test.py", # line 91, in _verifyScriptSucceeds # self.assertEqual( # File "/usr/lib64/python3.10/unittest/case.py", line 839, in assertEqual # assertion_func(first, second, msg=msg) # File "/usr/lib64/python3.10/unittest/case.py", line 832, in _baseAssertEqual # raise self.failureException(msg) # AssertionError: 0 != 64 : process failed with exit code 64 (stdout: b'', stderr: b'') sed -r -i "s/^([[:blank:]]*)(def test_(can_configure_logger|grpc_logger|\ handler_found|logger_not_occupied))\\b/\ \\1@unittest.skip('Child process exits with code 64')\\n\\1\\2/" \ 'src/python/grpcio_tests/tests/unit/_logging_test.py' %endif %ifarch %{ix86} %{arm32} # Confirmed in 1.41.0 2021-10-05 # TODO figure out how to report this upstream in a useful/actionable way sed -r -i "s/^([[:blank:]]*)(def testCancelManyCalls)\\b/\ \\1@unittest.skip('May hang unexplainedly')\\n\\1\\2/" \ 'src/python/grpcio_tests/tests/unit/_cython/_cancel_many_calls_test.py' %endif %build # ~~~~ C (core) and C++ (cpp) ~~~~ echo '===== Building C (core) and C++ components =====' 2>&1 # We could use either make or ninja as the backend; ninja is faster and has no # disadvantages (except a small additional BR, given we already need Python) # # We need to adjust the C++ standard to avoid abseil-related linker errors. %cmake \ -DgRPC_INSTALL:BOOL=ON \ -DCMAKE_CXX_STANDARD:STRING=%{cpp_std} \ -DCMAKE_SKIP_INSTALL_RPATH:BOOL=ON \ -DgRPC_INSTALL_BINDIR:PATH=%{_bindir} \ -DgRPC_INSTALL_LIBDIR:PATH=%{_libdir} \ -DgRPC_INSTALL_INCLUDEDIR:PATH=%{_includedir} \ -DgRPC_INSTALL_CMAKEDIR:PATH=%{_libdir}/cmake/grpc \ -DgRPC_INSTALL_SHAREDIR:PATH=%{_datadir}/grpc \ -DgRPC_BUILD_TESTS:BOOL=%{?with_core_tests:ON}%{?!with_core_tests:OFF} \ -DgRPC_BUILD_CODEGEN:BOOL=ON \ -DgRPC_BUILD_CSHARP_EXT:BOOL=ON \ -DgRPC_BACKWARDS_COMPATIBILITY_MODE:BOOL=OFF \ -DgRPC_ZLIB_PROVIDER:STRING='package' \ -DgRPC_CARES_PROVIDER:STRING='package' \ -DgRPC_RE2_PROVIDER:STRING='package' \ -DgRPC_SSL_PROVIDER:STRING='package' \ -DgRPC_PROTOBUF_PROVIDER:STRING='package' \ -DgRPC_PROTOBUF_PACKAGE_TYPE:STRING='MODULE' \ -DgRPC_BENCHMARK_PROVIDER:STRING='package' \ -DgRPC_ABSL_PROVIDER:STRING='package' \ -DgRPC_USE_PROTO_LITE:BOOL=OFF \ -DgRPC_BUILD_GRPC_CPP_PLUGIN:BOOL=ON \ -DgRPC_BUILD_GRPC_CSHARP_PLUGIN:BOOL=ON \ -DgRPC_BUILD_GRPC_NODE_PLUGIN:BOOL=ON \ -DgRPC_BUILD_GRPC_OBJECTIVE_C_PLUGIN:BOOL=ON \ -DgRPC_BUILD_GRPC_PHP_PLUGIN:BOOL=ON \ -DgRPC_BUILD_GRPC_PYTHON_PLUGIN:BOOL=ON \ -DgRPC_BUILD_GRPC_RUBY_PLUGIN:BOOL=ON \ -GNinja %cmake_build # ~~~~ Python ~~~~ echo '===== Building Python grpcio package =====' 2>&1 # Since there are some interdepndencies in the Python packages (e.g., many have # setup_requires: grpcio-tools), we do temporary installs of built packages # into a local directory as needed, and add it to the PYTHONPATH. PYROOT="${PWD}/%{_vpath_builddir}/pyroot" if [ -n "${PYTHONPATH-}" ]; then PYTHONPATH="${PYTHONPATH}:"; fi PYTHONPATH="${PYTHONPATH-}${PYROOT}%{python3_sitelib}" PYTHONPATH="${PYTHONPATH}:${PYROOT}%{python3_sitearch}" export PYTHONPATH # ~~ grpcio ~~ # Note that we had to patch in the GRPC_PYTHON_BUILD_SYSTEM_ABSL option. export GRPC_PYTHON_BUILD_WITH_CYTHON='True' export GRPC_PYTHON_BUILD_SYSTEM_OPENSSL='True' export GRPC_PYTHON_BUILD_SYSTEM_ZLIB='True' export GRPC_PYTHON_BUILD_SYSTEM_CARES='True' export GRPC_PYTHON_BUILD_SYSTEM_RE2='True' export GRPC_PYTHON_BUILD_SYSTEM_ABSL='True' export GRPC_PYTHON_DISABLE_LIBC_COMPATIBILITY='True' export GRPC_PYTHON_ENABLE_DOCUMENTATION_BUILD='False' # We must set GRPC_PYTHON_CFLAGS to avoid unwanted defaults. We take the # upstream flags except that we remove -std=c99, which is inapplicable to the # C++ parts of the extension. # # We must set GRPC_PYTHON_LDFLAGS to avoid unwanted defaults. The upstream # flags attempt to statically link libgcc, so we do not need any of them. Since # we forcibly unbundle protobuf, we need to add linker flags for protobuf # ourselves. export GRPC_PYTHON_CFLAGS="-fvisibility=hidden -fno-wrapv -fno-exceptions $( pkg-config --cflags protobuf )" export GRPC_PYTHON_LDFLAGS="$(pkg-config --libs protobuf)" %py3_build %{__python3} %{py_setup} %{?py_setup_args} install \ -O1 --skip-build --root "${PYROOT}" # ~~ grpcio-tools ~~ echo '===== Building Python grpcio_tools package =====' 2>&1 pushd "tools/distrib/python/grpcio_tools/" >/dev/null # When copying more things in here, make sure the subpackage License field # stays correct. We need copies, not symlinks, so that the “graft” in # MANIFEST.in works. mkdir -p grpc_root/src for srcdir in compiler do cp -rp "../../../../src/${srcdir}" "grpc_root/src/" done cp -rp '../../../../include' 'grpc_root/' # We must set GRPC_PYTHON_CFLAGS and GRPC_PYTHON_LDFLAGS again; grpcio_tools # does not have the same default upstream flags as grpcio does, and it needs to # link the protobuf compiler library. export GRPC_PYTHON_CFLAGS="-fno-wrapv -frtti $(pkg-config --cflags protobuf)" export GRPC_PYTHON_LDFLAGS="$(pkg-config --libs protobuf) -lprotoc" %py3_build # Remove unwanted shebang from grpc_tools.protoc source file, which will be # installed without an executable bit: find . -type f -name protoc.py -execdir sed -r -i '1{/^#!/d}' '{}' '+' %{__python3} %{py_setup} %{?py_setup_args} install \ -O1 --skip-build --root "${PYROOT}" popd >/dev/null echo '===== Building pure-Python packages =====' 1>&2 for suffix in channelz %{?!with_bootstrap:csds admin} health_checking \ reflection status testing tests do echo "----> grpcio_${suffix} <----" 1>&2 pushd "src/python/grpcio_${suffix}/" >/dev/null if ! echo "${suffix}" | grep -E "^(admin|csds)$" >/dev/null then %{__python3} %{py_setup} %{?py_setup_args} preprocess fi if ! echo "${suffix}" | grep -E "^(admin|csds|testing)$" >/dev/null then %{__python3} %{py_setup} %{?py_setup_args} build_package_protos fi %py3_build %{__python3} %{py_setup} %{?py_setup_args} install \ -O1 --skip-build --root "${PYROOT}" popd >/dev/null done %install # ~~~~ C (core) and C++ (cpp) ~~~~ %cmake_install %if %{with core_tests} # For some reason, grpc_cli is not installed. Do it manually. install -t '%{buildroot}%{_bindir}' -p -D '%{_vpath_builddir}/grpc_cli' # grpc_cli build does not respect CMAKE_INSTALL_RPATH # https://github.com/grpc/grpc/issues/25176 chrpath --delete '%{buildroot}%{_bindir}/grpc_cli' # This library is also required for grpc_cli; it is built as part of the test # code. install -t '%{buildroot}%{_libdir}' -p \ %{_vpath_builddir}/libgrpc++_test_config.so.* chrpath --delete '%{buildroot}%{_libdir}/'libgrpc++_test_config.so.* install -d '%{buildroot}/%{_mandir}/man1' install -t '%{buildroot}/%{_mandir}/man1' -p -m 0644 \ %{SOURCE100} %{SOURCE101} %{SOURCE102} %{SOURCE103} %{SOURCE104} \ %{SOURCE106} %{SOURCE107} %{SOURCE108} %endif # Remove any static libraries that may have been installed against our wishes find %{buildroot} -type f -name '*.a' -print -delete # Fix wrong permissions on installed headers find %{buildroot}%{_includedir}/grpc* -type f -name '*.h' -perm /0111 \ -execdir chmod -v a-x '{}' '+' # ~~~~ Python ~~~~ # Since several packages have an install_requires: grpcio-tools, we must ensure # the buildroot Python site-packages directories are in the PYTHONPATH. pushd '%{buildroot}' PYROOT="${PWD}" popd if [ -n "${PYTHONPATH-}" ]; then PYTHONPATH="${PYTHONPATH}:"; fi PYTHONPATH="${PYTHONPATH-}${PYROOT}%{python3_sitelib}" PYTHONPATH="${PYTHONPATH}:${PYROOT}%{python3_sitearch}" export PYTHONPATH # ~~ grpcio ~~ %py3_install # ~~ grpcio-tools ~~ pushd "tools/distrib/python/grpcio_tools/" >/dev/null %py3_install popd >/dev/null # ~~ pure-python modules grpcio-* ~~ for suffix in channelz %{?!with_bootstrap:csds admin} health_checking \ reflection status testing do pushd "src/python/grpcio_${suffix}/" >/dev/null %py3_install popd >/dev/null done # The grpcio_tests package should not be installed; it would provide top-level # packages with generic names like “tests” or “tests_aio”. # ~~~~ Miscellaneous ~~~~ # Replace copies of the certificate bundle with symlinks to the shared system # certificates. This has the following benefits: # - Reduces duplication and save space # - Respects system-wide administrative trust configuration # - Keeps “MPLv2.0” from having to be added to a number of License fields %global sysbundle %{_sysconfdir}/pki/ca-trust/extracted/pem/tls-ca-bundle.pem # We do not own this file; we temporarily install it in the buildroot so we do # not have dangling symlinks. install -D -t "%{buildroot}$(dirname '%{sysbundle}')" -m 0644 '%{sysbundle}' find '%{buildroot}' -type f -name 'roots.pem' | while read -r fn do ln -s -f "%{buildroot}%{sysbundle}" "${fn}" symlinks -c -o "${fn}" done rm -rvf "%{buildroot}$(dirname '%{sysbundle}')" # ~~ documentation and examples ~~ install -D -t '%{buildroot}%{_pkgdocdir}' -m 0644 -p AUTHORS *.md cp -rvp doc examples '%{buildroot}%{_pkgdocdir}' %check export FEDORA_NO_NETWORK_TESTS=1 %if %{with core_tests} PORT_SERVER_PORT="$(awk ' /_PORT_SERVER_PORT[[:blank:]]*=[[:blank:]]*[[:digit:]]+$/ { print $NF } ' tools/run_tests/python_utils/start_port_server.py)" # Note that no tests are actually found by ctest: %ctest # Exclude tests that are known to hang or otherwise fail. Assistance welcome in # figuring out what is wrong with these. Note, however, that we are running # the tests very differently from upstream, which uses scripts in # tools/run_tests/ that rebuild the entire source and use Docker, so it is # likely to be difficult to get help from upstream for any failures here. Note # that some of these tests would never work in an environment without Internet # access. { sed -r -e '/^(#|$)/d' -e 's|^(.*)$|%{_vpath_builddir}/\1_test|' <<'EOF' # Requires (or may require) network: resolve_address_using_ares_resolver resolve_address_using_ares_resolver_posix resolve_address_using_native_resolver resolve_address_using_native_resolver_posix ssl_transport_security # Seems to require privilege: flaky_network %ifarch s390x # Unexplained: # # [ RUN ] AddressSortingTest.TestSorterKnowsIpv6LoopbackIsAvailable # ../test/cpp/naming/address_sorting_test.cc:807: Failure # Expected equality of these values: # source_addr_output->sin6_family # Which is: 0 # 10 # ../test/cpp/naming/address_sorting_test.cc:817: Failure # Expected equality of these values: # source_addr_str # Which is: "::" # "::1" # [ FAILED ] AddressSortingTest.TestSorterKnowsIpv6LoopbackIsAvailable (0 ms) # # Confirmed in 1.41.0 2021-10-10 address_sorting %endif %ifarch s390x # Unexplained: # # Status is not ok: Setting authenticated associated data failed # E0805 21:01:40.415152384 1888289 aes_gcm_test.cc:77] assertion failed: status == GRPC_STATUS_OK # *** SIGABRT received at time=1628197300 on cpu 1 *** # PC: @ 0x3ff8581ec8e (unknown) __pthread_kill_internal # @ 0x3ff85701524 (unknown) (unknown) # @ 0x3ff85701790 (unknown) (unknown) # @ 0x3ff862e3b78 (unknown) (unknown) # @ 0x3ff8581ec8e (unknown) __pthread_kill_internal # @ 0x3ff857d03e0 (unknown) gsignal # @ 0x3ff857b3480 (unknown) abort # @ 0x2aa27303a48 (unknown) gsec_assert_ok() # @ 0x2aa27303b80 (unknown) gsec_test_random_encrypt_decrypt() # @ 0x2aa2730156e (unknown) main # @ 0x3ff857b3732 (unknown) __libc_start_call_main # @ 0x3ff857b380e (unknown) __libc_start_main@GLIBC_2.2 # @ 0x2aa27302730 (unknown) (unknown) # # Confirmed in 1.41.0 2021-10-10 alts_crypt %endif %ifarch s390x # Unexplained: # # (aborted without output) # # Confirmed in 1.41.0 2021-10-10 alts_crypter %endif %ifarch s390x # Unexplained: # # [ RUN ] AltsConcurrentConnectivityTest.TestBasicClientServerHandshakes # E0811 15:42:24.743250725 2232792 # alts_grpc_privacy_integrity_record_protocol.cc:107] Failed to unprotect, More # bytes written than expected. Frame decryption failed. # [… 14 similar lines omitted …] # E0811 15:42:29.735499217 2232786 # alts_grpc_privacy_integrity_record_protocol.cc:107] Failed to unprotect, More # bytes written than expected. Frame decryption failed. # /builddir/build/BUILD/grpc-1.39.0/test/core/tsi/alts/handshaker/alts_concurrent_connectivity_test.cc:245: # Failure # Expected equality of these values: # ev.type # Which is: 1 # GRPC_OP_COMPLETE # Which is: 2 # connect_loop runner:0x3ffc7ffdc68 got ev.type:1 i:0 # [ FAILED ] AltsConcurrentConnectivityTest.TestBasicClientServerHandshakes (5021 ms) # [ RUN ] AltsConcurrentConnectivityTest.TestConcurrentClientServerHandshakes # [… 2983 lines including some additional failures and error messages omitted …] # [----------] 5 tests from AltsConcurrentConnectivityTest (27346 ms total) # [----------] Global test environment tear-down # [==========] 5 tests from 1 test suite ran. (27347 ms total) # [ PASSED ] 3 tests. # [ FAILED ] 2 tests, listed below: # [ FAILED ] AltsConcurrentConnectivityTest.TestBasicClientServerHandshakes # [ FAILED ] AltsConcurrentConnectivityTest.TestConcurrentClientServerHandshakes # 2 FAILED TESTS # E0811 15:43:02.072126233 2232783 test_config.cc:195] # Timeout in waiting for gRPC shutdown # # Confirmed in 1.41.0 2021-10-10 alts_concurrent_connectivity %endif %ifarch s390x # Unexplained: # # (aborted without output) # # Confirmed in 1.41.0 2021-10-10 alts_frame_protector %endif %ifarch s390x # Unexplained: # # E0809 03:12:16.141688879 1707771 # alts_grpc_integrity_only_record_protocol.cc:109] Failed to protect, Setting # authenticated associated data failed # E0809 03:12:16.141863502 1707771 alts_grpc_record_protocol_test.cc:282] # assertion failed: status == TSI_OK # *** SIGABRT received at time=1628478736 on cpu 2 *** # PC: @ 0x3ffa571ec8e (unknown) __pthread_kill_internal # @ 0x3ffa5601524 (unknown) (unknown) # @ 0x3ffa5601790 (unknown) (unknown) # @ 0x3ffa61e3b78 (unknown) (unknown) # @ 0x3ffa571ec8e (unknown) __pthread_kill_internal # @ 0x3ffa56d03e0 (unknown) gsignal # @ 0x3ffa56b3480 (unknown) abort # @ 0x2aa1fa82e3e (unknown) random_seal_unseal() # @ 0x2aa1fa836f8 (unknown) alts_grpc_record_protocol_tests() # @ 0x2aa1fa81c68 (unknown) main # @ 0x3ffa56b3732 (unknown) __libc_start_call_main # @ 0x3ffa56b380e (unknown) __libc_start_main@GLIBC_2.2 # @ 0x2aa1fa81d60 (unknown) (unknown) # # Confirmed in 1.41.0 2021-10-10 alts_grpc_record_protocol %endif %ifarch s390x # Unexplained: # # E0807 15:46:27.681935728 3628534 # alts_grpc_integrity_only_record_protocol.cc:109] Failed to protect, Setting # authenticated associated data failed # E0807 15:46:27.682097664 3628534 alts_grpc_record_protocol_test.cc:282] # assertion failed: status == TSI_OK # *** SIGABRT received at time=1628351187 on cpu 1 *** # PC: @ 0x3ffbae9ec8e (unknown) __pthread_kill_internal # @ 0x3ffbad81524 (unknown) (unknown) # @ 0x3ffbad81790 (unknown) (unknown) # @ 0x3ffbb963b78 (unknown) (unknown) # @ 0x3ffbae9ec8e (unknown) __pthread_kill_internal # @ 0x3ffbae503e0 (unknown) gsignal # @ 0x3ffbae33480 (unknown) abort # @ 0x2aa07782e3e (unknown) random_seal_unseal() # @ 0x2aa077836f8 (unknown) alts_grpc_record_protocol_tests() # @ 0x2aa07781c68 (unknown) main # @ 0x3ffbae33732 (unknown) __libc_start_call_main # @ 0x3ffbae3380e (unknown) __libc_start_main@GLIBC_2.2 # @ 0x2aa07781d60 (unknown) (unknown) # # Confirmed in 1.41.0 2021-10-10 alts_handshaker_client %endif %ifarch s390x # Unexplained: # # (aborted without output) # # Confirmed in 1.41.0 2021-10-10 alts_iovec_record_protocol %endif %ifarch s390x # Unexplained: # # [ RUN ] AltsUtilTest.AuthContextWithGoodAltsContextWithoutRpcVersions # /builddir/build/BUILD/grpc-1.39.0/test/cpp/common/alts_util_test.cc:122: Failure # Expected equality of these values: # expected_sl # Which is: 1 # alts_context->security_level() # Which is: 0 # [ FAILED ] AltsUtilTest.AuthContextWithGoodAltsContextWithoutRpcVersions (0 ms) # # Confirmed in 1.41.0 2021-10-10 alts_util %endif %ifarch s390x # Unexplained: # # E0809 16:49:05.522667340 1558872 # alts_grpc_integrity_only_record_protocol.cc:109] Failed to protect, Setting # authenticated associated data failed # E0809 16:49:05.523083934 1558872 alts_zero_copy_grpc_protector_test.cc:183] # assertion failed: tsi_zero_copy_grpc_protector_protect( sender, # &var->original_sb, &var->protected_sb) == TSI_OK # *** SIGABRT received at time=1628527745 on cpu 2 *** # PC: @ 0x3ff8169ec8e (unknown) __pthread_kill_internal # @ 0x3ff81581524 (unknown) (unknown) # @ 0x3ff81581790 (unknown) (unknown) # @ 0x3ff82163b78 (unknown) (unknown) # @ 0x3ff8169ec8e (unknown) __pthread_kill_internal # @ 0x3ff816503e0 (unknown) gsignal # @ 0x3ff81633480 (unknown) abort # @ 0x2aa3d0028b8 (unknown) seal_unseal_small_buffer() # @ 0x2aa3d002a68 (unknown) alts_zero_copy_protector_seal_unseal_small_buffer_tests() # @ 0x2aa3d001b26 (unknown) main # @ 0x3ff81633732 (unknown) __libc_start_call_main # @ 0x3ff8163380e (unknown) __libc_start_main@GLIBC_2.2 # @ 0x2aa3d001c10 (unknown) (unknown) # # Confirmed in 1.41.0 2021-10-10 alts_zero_copy_grpc_protector %endif %ifarch %{ix86} %{arm32} # Unexplained: # # [ RUN ] CertificateProviderStoreTest.Basic # E0809 18:01:00.777880860 323759 certificate_provider_store.cc:67] # Certificate provider factory fake2 not found # [ OK ] CertificateProviderStoreTest.Basic (1 ms) # [ RUN ] CertificateProviderStoreTest.Multithreaded # terminate called without an active exception # *** SIGABRT received at time=1628532060 on cpu 0 *** # PC: @ 0xf7f9d559 (unknown) __kernel_vsyscall # # Confirmed in 1.41.0 2021-10-10 certificate_provider_store %endif %ifarch %{ix86} # Unexplained: # # [ RUN ] ChannelTracerTest.TestMultipleEviction # /builddir/build/BUILD/grpc-1.39.0/test/core/channel/channel_trace_test.cc:65: # Failure # Expected equality of these values: # array.array_value().size() # Which is: 3 # expected # Which is: 4 # [ FAILED ] ChannelTracerTest.TestMultipleEviction (1 ms) # # Confirmed in 1.41.0 2021-10-10 channel_trace %endif %ifarch ppc64le %{arm32} %{arm64} s390x # Unexplained: # # ppc64le, aarch64: # # E0811 14:46:04.709808861 2142245 tcp_server_posix.cc:216] Failed accept4: Too many open files # terminate called after throwing an instance of 'std::runtime_error' # what(): random_device::random_device(const std::string&): device not available # *** SIGABRT received at time=1628693164 on cpu 4 *** # [address_is_readable.cc : 96] RAW: Failed to create pipe, errno=24 # [failure_signal_handler.cc : 331] RAW: Signal 6 raised at PC=0x7fff926a9864 while already in AbslFailureSignalHandler() # [… 13710 similar messages omitted …] # *** SIGABRT received at time=1628693166 on cpu 1 *** # [address_is_readable.cc : 96] RAW: Failed to create pipe, errno=24 # [failure_signal_handler.cc : 331] RAW: Signal 6 raised at PC=0x7fff926a9864 while already in AbslFailureSignalHandler() # *** SIGABRT received at time=1628693167 on cpu 1 *** # PC: @ 0x7fff926a9864 (unknown) __pthread_kill_internal # @ 0x7fff92461a48 (unknown) (unknown) # @ 0x7fff937ae4e2 48 (unknown) # @ 0x7fff9264848c 48 gsignal # @ 0x7fff92621404 336 abort # @ 0x7fff91d112a4 3200 (unknown) # @ 0x7fff91d112fc 48 absl::lts_20210324::raw_logging_internal::RawLog() # @ 0x7fff91a824c4 272 absl::lts_20210324::debugging_internal::AddressIsReadable() # @ 0x7fff923f1568 176 (unknown) # @ 0x7fff923f1730 96 (unknown) # @ 0x7fff923f19e8 32 absl::lts_20210324::GetStackFramesWithContext() # @ 0x7fff924616e4 480 (unknown) # @ 0x7fff92461a48 (unknown) (unknown) # @ 0x7fff937ae4e2 48 (unknown) # @ 0x7fff9264848c 48 gsignal # @ 0x7fff92621404 336 abort # @ 0x7fff91d112a4 3200 (unknown) # @ 0x7fff91d112fc 48 absl::lts_20210324::raw_logging_internal::RawLog() # @ 0x7fff91a824c4 272 absl::lts_20210324::debugging_internal::AddressIsReadable() # @ 0x7fff923f1568 176 (unknown) # @ 0x7fff923f1730 96 (unknown) # @ 0x7fff923f19e8 32 absl::lts_20210324::GetStackFramesWithContext() # @ 0x7fff924616e4 480 (unknown) # @ 0x7fff92461a48 (unknown) (unknown) # @ 0x7fff937ae4e2 48 (unknown) # @ 0x7fff9264848c 48 gsignal # @ 0x7fff92621404 336 abort # @ 0x7fff91d112a4 3200 (unknown) # @ 0x7fff91d112fc 48 absl::lts_20210324::raw_logging_internal::RawLog() # @ 0x7fff91a824c4 272 absl::lts_20210324::debugging_internal::AddressIsReadable() # @ 0x7fff923f1568 176 (unknown) # @ 0x7fff923f1730 96 (unknown) # @ 0x7fff923f19e8 32 absl::lts_20210324::GetStackFramesWithContext() # @ ... and at least 1000 more frames # # armv7hl, s390x: # # E0811 15:35:58.278096553 31424 grpclb.cc:1055] [grpclb 0xfe65c0] lb_calld=0xfe9778: Invalid LB response received: ''. Ignoring. # E0811 15:35:58.966844494 31575 tcp_server_posix.cc:216] Failed accept4: Too many open files # terminate called after throwing an instance of 'std::runtime_error' # what(): random_device::random_device(const std::string&): device not available # *** SIGABRT received at time=1628696159 on cpu 4 *** # [symbolize_elf.inc : 965] RAW: /proc/self/task/31421/maps: errno=24 # PC: @ 0xb6418058 (unknown) (unknown) # @ 0xb62d4274 (unknown) (unknown) # @ 0xb63d2310 (unknown) (unknown) # @ 0xb6418058 (unknown) (unknown) # @ 0xb63d0ddc (unknown) (unknown) # # Confirmed in 1.41.0 2021-10-10 client_channel_stress %endif %ifarch s390x # Unexplained hang: # # [ RUN ] ClientLbEnd2endTest.RoundRobinWithHealthChecking # /builddir/build/BUILD/grpc-1.39.0/test/cpp/end2end/client_lb_end2end_test.cc:1452: Failure # Value of: WaitForChannelReady(channel.get()) # Actual: false # Expected: true # [… hundreds of similar messages …] # From /builddir/build/BUILD/grpc-1.39.0/test/cpp/end2end/client_lb_end2end_test.cc:1462 # Error: Deadline Exceeded # /builddir/build/BUILD/grpc-1.39.0/test/cpp/end2end/client_lb_end2end_test.cc:342: Failure # Value of: success # Actual: false # Expected: true # From /builddir/build/BUILD/grpc-1.39.0/test/cpp/end2end/client_lb_end2end_test.cc:1462 # Error: Deadline Exceeded # timeout: sending signal TERM to command 'redhat-linux-build/client_lb_end2end_test' # *** SIGTERM received at time=1628744184 on cpu 0 *** # PC: @ 0x3ff89d165aa (unknown) epoll_wait # @ 0x3ff89881524 (unknown) (unknown) # @ 0x3ff89881790 (unknown) (unknown) # @ 0x3ff8acffb78 (unknown) (unknown) # @ 0x3ff89d165aa (unknown) epoll_wait # @ 0x3ff8a573dea (unknown) pollset_work() # @ 0x3ff8a577630 (unknown) pollset_work() # @ 0x3ff8a611a8e (unknown) cq_pluck() # @ 0x3ff8a6102c2 (unknown) grpc_completion_queue_pluck # @ 0x3ff8a84c08c (unknown) grpc::CoreCodegen::grpc_completion_queue_pluck() # @ 0x2aa189b3de0 (unknown) grpc::CompletionQueue::Pluck() # @ 0x2aa189bb4be (unknown) grpc::internal::BlockingUnaryCallImpl<>::BlockingUnaryCallImpl() # @ 0x2aa189d213a (unknown) grpc::internal::BlockingUnaryCall<>() # @ 0x2aa189c4e2e (unknown) grpc::testing::EchoTestService::Stub::Echo() # @ 0x2aa18a01112 (unknown) grpc::testing::(anonymous namespace)::ClientLbEnd2endTest::SendRpc() # @ 0x2aa18a0139c (unknown) grpc::testing::(anonymous namespace)::ClientLbEnd2endTest::CheckRpcSendOk() # @ 0x2aa18a07a00 (unknown) grpc::testing::(anonymous namespace)::ClientLbEnd2endTest::WaitForServer() # @ 0x2aa18a0f97a (unknown) grpc::testing::(anonymous namespace)::ClientLbEnd2endTest_RoundRobinWithHealthChecking_Test::TestBody() # @ 0x2aa18a706f6 (unknown) testing::internal::HandleExceptionsInMethodIfSupported<>() # @ 0x2aa18a62aba (unknown) testing::Test::Run() # @ 0x2aa18a62d54 (unknown) testing::TestInfo::Run() # @ 0x2aa18a635ce (unknown) testing::TestSuite::Run() # @ 0x2aa18a64258 (unknown) testing::internal::UnitTestImpl::RunAllTests() # @ 0x2aa18a70c86 (unknown) testing::internal::HandleExceptionsInMethodIfSupported<>() # @ 0x2aa18a62e68 (unknown) testing::UnitTest::Run() # @ 0x2aa189aa086 (unknown) main # @ 0x3ff89c33732 (unknown) __libc_start_call_main # @ 0x3ff89c3380e (unknown) __libc_start_main@GLIBC_2.2 # @ 0x2aa189ac6a0 (unknown) (unknown) # # Confirmed in 1.41.0 2021-10-10 client_lb_end2end %endif %ifarch %{arm32} %{ix86} # Unexplained: # # [ RUN ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.ServerStreamingCallThroughFakeBinderChannel/0 # /builddir/build/BUILD/grpc-1.41.0/test/core/transport/binder/end2end/ # end2end_binder_transport_test.cc:188: Failure # Expected equality of these values: # cnt # Which is: 0 # end2end_testing::EchoServer::kServerStreamingCounts # Which is: 100 # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.ServerStreamingCallThroughFakeBinderChannel/0, # where GetParam() = 0 (3 ms) # [… etc. …] # [ FAILED ] 18 tests, listed below: # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.ServerStreamingCallThroughFakeBinderChannel/0, # where GetParam() = 0 # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.ServerStreamingCallThroughFakeBinderChannel/1, # where GetParam() = 10ns # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.ServerStreamingCallThroughFakeBinderChannel/2, # where GetParam() = 10us # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.ServerStreamingCallThroughFakeBinderChannel/3, # where GetParam() = 100us # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.ServerStreamingCallThroughFakeBinderChannel/4, # where GetParam() = 1ms # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.ServerStreamingCallThroughFakeBinderChannel/5, # where GetParam() = 20ms # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.ClientStreamingCallThroughFakeBinderChannel/0, # where GetParam() = 0 # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.ClientStreamingCallThroughFakeBinderChannel/1, # where GetParam() = 10ns # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.ClientStreamingCallThroughFakeBinderChannel/2, # where GetParam() = 10us # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.ClientStreamingCallThroughFakeBinderChannel/3, # where GetParam() = 100us # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.ClientStreamingCallThroughFakeBinderChannel/4, # where GetParam() = 1ms # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.ClientStreamingCallThroughFakeBinderChannel/5, # where GetParam() = 20ms # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.BiDirStreamingCallThroughFakeBinderChannel/0, # where GetParam() = 0 # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.BiDirStreamingCallThroughFakeBinderChannel/1, # where GetParam() = 10ns # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.BiDirStreamingCallThroughFakeBinderChannel/2, # where GetParam() = 10us # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.BiDirStreamingCallThroughFakeBinderChannel/3, # where GetParam() = 100us # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.BiDirStreamingCallThroughFakeBinderChannel/4, # where GetParam() = 1ms # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.BiDirStreamingCallThroughFakeBinderChannel/5, # where GetParam() = 20ms # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.ServerStreamingCallThroughFakeBinderChannel/0, # where GetParam() = 0 # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.ServerStreamingCallThroughFakeBinderChannel/1, # where GetParam() = 10ns # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.ServerStreamingCallThroughFakeBinderChannel/2, # where GetParam() = 10us # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.ServerStreamingCallThroughFakeBinderChannel/3, # where GetParam() = 100us # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.ServerStreamingCallThroughFakeBinderChannel/4, # where GetParam() = 1ms # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.ServerStreamingCallThroughFakeBinderChannel/5, # where GetParam() = 20ms # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.ClientStreamingCallThroughFakeBinderChannel/0, # where GetParam() = 0 # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.ClientStreamingCallThroughFakeBinderChannel/1, # where GetParam() = 10ns # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.ClientStreamingCallThroughFakeBinderChannel/2, # where GetParam() = 10us # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.ClientStreamingCallThroughFakeBinderChannel/3, # where GetParam() = 100us # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.ClientStreamingCallThroughFakeBinderChannel/4, # where GetParam() = 1ms # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.ClientStreamingCallThroughFakeBinderChannel/5, # where GetParam() = 20ms # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.BiDirStreamingCallThroughFakeBinderChannel/0, # where GetParam() = 0 # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.BiDirStreamingCallThroughFakeBinderChannel/1, # where GetParam() = 10ns # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.BiDirStreamingCallThroughFakeBinderChannel/2, # where GetParam() = 10us # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.BiDirStreamingCallThroughFakeBinderChannel/3, # where GetParam() = 100us # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.BiDirStreamingCallThroughFakeBinderChannel/4, # where GetParam() = 1ms # [ FAILED ] End2EndBinderTransportTestWithDifferentDelayTimes/ # End2EndBinderTransportTest.BiDirStreamingCallThroughFakeBinderChannel/5, # where GetParam() = 20ms # # Confirmed in 1.41.0 2021-09-29 end2end_binder_transport %endif # Unexplained: # # [ RUN ] EvaluateArgsTest.EmptyMetadata # *** SIGSEGV received at time=1628108665 on cpu 143 *** # PC: @ 0xffffac12f3d0 (unknown) __strlen_asimd # @ 0xffffac06f810 1142966656 (unknown) # @ 0xffffaca217ec 64 (unknown) # @ 0xaaaadf5806dc 624 grpc_core::EvaluateArgsTest_EmptyMetadata_Test::TestBody() # @ 0xaaaadf5c1b78 96 testing::internal::HandleExceptionsInMethodIfSupported<>() # @ 0xaaaadf5b48d8 32 testing::Test::Run() # @ 0xaaaadf5b4ad4 64 testing::TestInfo::Run() # @ 0xaaaadf5b5424 80 testing::TestSuite::Run() # @ 0xaaaadf5b5f08 240 testing::internal::UnitTestImpl::RunAllTests() # @ 0xaaaadf5b4ca0 144 testing::UnitTest::Run() # @ 0xaaaadf57c2d8 64 main # @ 0xffffac0ba0c4 272 __libc_start_call_main # @ 0xffffac0ba198 (unknown) __libc_start_main@GLIBC_2.17 # # Confirmed in 1.41.0 2021-10-10 evaluate_args %ifarch x86_64 %{ix86} # Unexplained: # # [ RUN ] ExamineStackTest.AbseilStackProvider # /builddir/build/BUILD/grpc-1.39.0/test/core/gprpp/examine_stack_test.cc:75: Failure # Value of: stack_trace->find("GetCurrentStackTrace") != std::string::npos # Actual: false # Expected: true # [ FAILED ] ExamineStackTest.AbseilStackProvider (0 ms) # # Confirmed in 1.41.0 2021-10-10 examine_stack %endif %ifarch s390x # Unexplained: # # E0809 21:33:27.754988355 3699302 cq_verifier.cc:228] # no event received, but expected:tag(257) GRPC_OP_COMPLETE success=1 # /builddir/build/BUILD/grpc-1.39.0/test/core/end2end/goaway_server_test.cc:264 # tag(769) GRPC_OP_COMPLETE success=1 # /builddir/build/BUILD/grpc-1.39.0/test/core/end2end/goaway_server_test.cc:265 # *** SIGABRT received at time=1628544807 on cpu 2 *** # PC: @ 0x3ff9ce1ec8e (unknown) __pthread_kill_internal # @ 0x3ff9cd01524 (unknown) (unknown) # @ 0x3ff9cd01790 (unknown) (unknown) # @ 0x3ff9d9e3b78 (unknown) (unknown) # @ 0x3ff9ce1ec8e (unknown) __pthread_kill_internal # @ 0x3ff9cdd03e0 (unknown) gsignal # @ 0x3ff9cdb3480 (unknown) abort # @ 0x2aa3fb850a6 (unknown) cq_verify() # @ 0x2aa3fb8359e (unknown) main # @ 0x3ff9cdb3732 (unknown) __libc_start_call_main # @ 0x3ff9cdb380e (unknown) __libc_start_main@GLIBC_2.2 # @ 0x2aa3fb83cd0 (unknown) (unknown) # # Confirmed in 1.41.0 2021-10-11 goaway_server %endif %ifarch %{ix86} %{arm32} # Unexplained: # # [ RUN ] GrpcTlsCertificateDistributorTest.SetKeyMaterialsInCallback # terminate called without an active exception # *** SIGABRT received at time=1628556696 on cpu 3 *** # PC: @ 0xf7fa9559 (unknown) __kernel_vsyscall # # Confirmed in 1.41.0 2021-10-11 grpc_tls_certificate_distributor %endif # Unexplained: # # [ RUN ] GrpcToolTest.CallCommandWithTimeoutDeadlineSet # [libprotobuf ERROR google/protobuf/text_format.cc:319] Error parsing text-format grpc.testing.SimpleRequest: 1:7: Message type "grpc.testing.SimpleRequest" has no field named "redhat". # Failed to convert text format to proto. # Failed to parse request. # /builddir/build/BUILD/grpc-1.39.0/test/cpp/util/grpc_tool_test.cc:912: Failure # Value of: 0 == GrpcToolMainLib(ArraySize(argv), argv, TestCliCredentials(), std::bind(PrintStream, &output_stream, std::placeholders::_1)) # Actual: false # Expected: true # /builddir/build/BUILD/grpc-1.39.0/test/cpp/util/grpc_tool_test.cc:917: Failure # Value of: nullptr != strstr(output_stream.str().c_str(), "message: \"true\"") # Actual: false # Expected: true # [ FAILED ] GrpcToolTest.CallCommandWithTimeoutDeadlineSet (4 ms) # # Confirmed in 1.41.0 2021-10-11 grpc_tool # While we have fixed a couple of problems with these tests, including porting # the test server to Python 3, success still eludes us. # # 127.0.0.1 - - [02/Aug/2021 20:34:47] "GET /get HTTP/1.0" 200 - # E0802 20:34:48.343858742 1765052 httpcli_test.cc:52] # assertion failed: response->status == 200 # *** SIGABRT received at time=1627936488 on cpu 2 *** # PC: @ 0x7fe44b4f2783 (unknown) pthread_kill@@GLIBC_2.34 # @ ... and at least 1 more frames # # Confirmed in 1.41.0 2021-10-11 httpcli httpscli %ifarch %{ix86} %{arm32} # Unexplained: # # /builddir/build/BUILD/grpc-1.39.0/test/cpp/server/load_reporter/get_cpu_stats_test.cc:39: Failure # Expected: (busy) <= (total), actual: 9034196912422118975 vs 3761728973136652623 # [ FAILED ] GetCpuStatsTest.BusyNoLargerThanTotal (0 ms) # # Confirmed in 1.41.0 2021-10-11 lb_get_cpu_stats %endif %ifarch s390x # Unexplained: # # *** SIGABRT received at time=1628614005 on cpu 0 *** # PC: @ 0x3ff81d1ec8e (unknown) __pthread_kill_internal # @ 0x3ff81c01524 (unknown) (unknown) # @ 0x3ff81c01790 (unknown) (unknown) # @ 0x3ff82363b78 (unknown) (unknown) # @ 0x3ff81d1ec8e (unknown) __pthread_kill_internal # @ 0x3ff81cd03e0 (unknown) gsignal # @ 0x3ff81cb3480 (unknown) abort # @ 0x2aa18880c9e (unknown) verification_test() # @ 0x2aa18880a34 (unknown) main # @ 0x3ff81cb3732 (unknown) __libc_start_call_main # @ 0x3ff81cb380e (unknown) __libc_start_main@GLIBC_2.2 # @ 0x2aa18880ab0 (unknown) (unknown) # # Confirmed in 1.41.0 2021-10-11 murmur_hash %endif %ifarch x86_64 %{ix86} # Unexplained: # # [ RUN ] StackTracerTest.Basic # /builddir/build/BUILD/grpc-1.39.0/test/core/util/stack_tracer_test.cc:35: Failure # Value of: absl::StrContains(stack_trace, "Basic") # Actual: false # Expected: true # [ FAILED ] StackTracerTest.Basic (1 ms) # # Confirmed in 1.41.0 2021-10-11 stack_tracer %endif # Unexplained: # # This may be flaky and sometimes succeed; this is known to be the case on # ppc64le. # # E0805 15:49:03.066330569 3863708 oauth2_credentials.cc:158] # Call to http server ended with error 401 # [{"access_token":"ya29.AHES6ZRN3-HlhAPya30GnW_bHSb_", # "expires_in":3599, "token_type":"Bearer"}]. # *** SIGSEGV received at time=1628178543 on cpu 3 *** # PC: @ 0x7ff236e4219c (unknown) __strlen_evex # @ ... and at least 1 more frames # # Confirmed in 1.41.0 2021-10-12 test_core_security_credentials # Unexplained: # # [ RUN ] XdsTest/BasicTest.Vanilla/XdsResolverV3 # E0811 05:13:55.545624715 3911922 xds_resolver.cc:836] # [xds_resolver 0x5650c8f82c00] received error from XdsClient: # {"created":"@1628658835.545596932","description":"xds call # failed","file":"/builddir/build/BUILD/grpc-1.39.0/src/core/ext/xds/xds_client.cc","file_line":1309} # E0811 05:13:55.546102538 3911922 cds.cc:533] # [cdslb 0x5650c8f80dd0] xds error obtaining data for cluster cluster_name: # {"created":"@1628658835.545596932","description":"xds call # failed","file":"/builddir/build/BUILD/grpc-1.39.0/src/core/ext/xds/xds_client.cc","file_line":1309} # E0811 05:13:55.546238067 3911922 xds_cluster_resolver.cc:741] # [xds_cluster_resolver_lb 0x5650c90f0200] discovery mechanism 0 xds watcher # reported error: {"created":"@1628658835.545596932","description":"xds call # failed","file":"/builddir/build/BUILD/grpc-1.39.0/src/core/ext/xds/xds_client.cc","file_line":1309} # [ OK ] XdsTest/BasicTest.Vanilla/XdsResolverV3 (102 ms) # [ RUN ] XdsTest/BasicTest.Vanilla/XdsResolverV3WithLoadReporting # E0811 05:13:55.635384861 3911938 xds_resolver.cc:836] # [xds_resolver 0x5650c8f82c00] received error from XdsClient: # {"created":"@1628658835.635350317","description":"xds call # failed","file":"/builddir/build/BUILD/grpc-1.39.0/src/core/ext/xds/xds_client.cc","file_line":1309} # E0811 05:13:55.635785649 3911938 cds.cc:533] # [cdslb 0x7f597800aaf0] xds error obtaining data for cluster cluster_name: # {"created":"@1628658835.635350317","description":"xds call # failed","file":"/builddir/build/BUILD/grpc-1.39.0/src/core/ext/xds/xds_client.cc","file_line":1309} # E0811 05:13:55.635941953 3911938 xds_cluster_resolver.cc:741] # [xds_cluster_resolver_lb 0x7f597c004940] discovery mechanism 0 xds watcher # reported error: {"created":"@1628658835.635350317","description":"xds call # failed","file":"/builddir/build/BUILD/grpc-1.39.0/src/core/ext/xds/xds_client.cc","file_line":1309} # [ OK ] XdsTest/BasicTest.Vanilla/XdsResolverV3WithLoadReporting (89 ms) # [ RUN ] XdsTest/BasicTest.Vanilla/FakeResolverV3 # *** SIGSEGV received at time=1628658835 on cpu 5 *** # PC: @ 0x7f5984c2d19c (unknown) __strlen_evex # @ ... and at least 1 more frames # # Confirmed in 1.41.0 2021-10-12 xds_end2end EOF } | xargs -r chmod -v a-x find %{_vpath_builddir} -type f -perm /0111 -name '*_test' | sort | while read -r testexe do echo "==== $(date -u --iso-8601=ns): $(basename "${testexe}") ====" %{__python3} tools/run_tests/start_port_server.py # We have tried to skip all tests that hang, but since this is a common # problem, we use timeout so that a test that does hang breaks the build in # a reasonable amount of time. timeout -k 11m -v 10m "${testexe}" done # Stop the port server curl "http://localhost:${PORT_SERVER_PORT}/quitquitquit" || : %endif # Work around problems in generated tests; we could not fix them in %%prep # because the test implementations did not exist yet. %ifarch ppc64le # Confirmed in 1.41.0 2021-10-01 (likely flaky) # protoc_plugin._python_plugin_test.SimpleStubsPluginTest.testUnaryCall # traceback: # Traceback (most recent call last): # File "/usr/lib64/python3.10/unittest/case.py", line 59, in testPartExecutor # yield # File "/usr/lib64/python3.10/unittest/case.py", line 591, in run # self._callTestMethod(testMethod) # File "/usr/lib64/python3.10/unittest/case.py", line 549, in _callTestMethod # method() # File "/builddir/build/BUILD/grpc-1.41.0/src/python/grpcio_tests/tests/ # protoc_plugin/_python_plugin_test.py", line 548, in testUnaryCall # response = service_pb2_grpc.TestService.UnaryCall( # File "/builddir/build/BUILD/grpc-1.41.0/src/python/grpcio_tests/tests/ # protoc_plugin/protos/service/test_service_pb2_grpc.py", line 140, in UnaryCall # return grpc.experimental.unary_unary(request, target, # '/grpc_protoc_plugin.TestService/UnaryCall', # File "/builddir/build/BUILDROOT/grpc-1.41.0-2.fc36.ppc64le/usr/lib64/ # python3.10/site-packages/grpc/experimental/__init__.py", line 77, in _wrapper # return f(*args, **kwargs) # File "/builddir/build/BUILDROOT/grpc-1.41.0-2.fc36.ppc64le/usr/lib64/ # python3.10/site-packages/grpc/_simple_stubs.py", line 242, in unary_unary # return multicallable(request, # File "/builddir/build/BUILDROOT/grpc-1.41.0-2.fc36.ppc64le/usr/lib64/ # python3.10/site-packages/grpc/_channel.py", line 946, in __call__ # return _end_unary_response_blocking(state, call, False, None) # File "/builddir/build/BUILDROOT/grpc-1.41.0-2.fc36.ppc64le/usr/lib64/ # python3.10/site-packages/grpc/_channel.py", line 849, in # _end_unary_response_blocking # raise _InactiveRpcError(state) # grpc._channel._InactiveRpcError: <_InactiveRpcError of RPC that terminated with: # status = StatusCode.UNAVAILABLE # details = "Broken pipe" # debug_error_string = "{"created":"@1633121043.829503175", # "description":"Error received from peer ipv6:[::1]:42049", # "file":"src/core/lib/surface/call.cc","file_line":1069, # "grpc_message":"Broken pipe","grpc_status":14}" # > # stdout: # stderr: # /builddir/build/BUILD/grpc-1.41.0/src/python/grpcio_tests/tests/ # protoc_plugin/protos/service/test_service_pb2_grpc.py:140: # ExperimentalApiWarning: 'unary_unary' is an experimental API. It is # subject to change or removal between minor releases. Proceed with # caution. # return grpc.experimental.unary_unary(request, target, # '/grpc_protoc_plugin.TestService/UnaryCall', sed -r -i -e "s/^([[:blank:]]*)(def UnaryCall\(request,)$/\ \\1@unittest.skip('Broken pipe')\\n\\1\\2/" \ -e "s/^(import grpc)$/\\1\\nimport unittest/" \ "src/python/grpcio_tests/tests/protoc_plugin/protos/service/\ test_service_pb2_grpc.py" %endif pushd src/python/grpcio_tests for suite in \ test_lite \ %{?with_python_aio_tests:test_aio} \ %{?with_python_gevent_tests:test_gevent} \ test_py3_only do echo "==== $(date -u --iso-8601=ns): Python ${suite} ====" # See the implementation of the %%pytest macro, upon which our environment # setup is based. We add a timeout that is rather long, as it must apply to # the entire test suite. (Patching in a per-test timeout would be harder.) env CFLAGS="${CFLAGS:-${RPM_OPT_FLAGS}}" \ LDFLAGS="${LDFLAGS:-${RPM_LD_FLAGS}}" \ PATH="%{buildroot}%{_bindir}:$PATH" \ PYTHONPATH="${PYTHONPATH:-%{buildroot}%{python3_sitearch}:%{buildroot}%{python3_sitelib}}" \ PYTHONDONTWRITEBYTECODE=1 \ timeout -k 31m -v 30m \ %{__python3} %{py_setup} %{?py_setup_args} "${suite}" done popd %if %{without system_gtest} # As a sanity check for our claim that gtest/gmock are not bundled, check # installed executables for symbols that appear to have come from gtest/gmock. foundgtest=0 if find %{buildroot} -type f -perm /0111 \ -execdir objdump --syms --dynamic-syms --demangle '{}' '+' 2>/dev/null | grep -E '[^:]testing::' then echo 'Found traces of gtest/gmock' 1>&2 exit 1 fi %endif %files %license LICENSE NOTICE.txt %{_libdir}/libaddress_sorting.so.%{c_so_version}* %{_libdir}/libgpr.so.%{c_so_version}* %{_libdir}/libgrpc.so.%{c_so_version}* %{_libdir}/libgrpc_unsecure.so.%{c_so_version}* %{_libdir}/libupb.so.%{c_so_version}* %files data %license LICENSE NOTICE.txt %dir %{_datadir}/grpc %{_datadir}/grpc/roots.pem %files doc %license LICENSE NOTICE.txt %{_pkgdocdir} %files cpp %{_libdir}/libgrpc++.so.%{cpp_so_version}* %{_libdir}/libgrpc++_alts.so.%{cpp_so_version}* %{_libdir}/libgrpc++_error_details.so.%{cpp_so_version}* %{_libdir}/libgrpc++_reflection.so.%{cpp_so_version}* %{_libdir}/libgrpc++_unsecure.so.%{cpp_so_version}* %{_libdir}/libgrpc_plugin_support.so.%{cpp_so_version}* %{_libdir}/libgrpcpp_channelz.so.%{cpp_so_version}* %if %{with core_tests} %files cli %{_bindir}/grpc_cli %{_libdir}/libgrpc++_test_config.so.%{cpp_so_version}* %{_mandir}/man1/grpc_cli.1* %{_mandir}/man1/grpc_cli-*.1* %endif %files plugins # These are for program use and do not offer a CLI for the end user, so they # should really be in %%{_libexecdir}; however, too many downstream users # expect them in $PATH to change this for the time being. %{_bindir}/grpc_*_plugin %files devel %{_libdir}/libaddress_sorting.so %{_libdir}/libgpr.so %{_libdir}/libgrpc.so %{_libdir}/libgrpc_unsecure.so %{_libdir}/libupb.so %{_includedir}/grpc %{_libdir}/pkgconfig/gpr.pc %{_libdir}/pkgconfig/grpc.pc %{_libdir}/pkgconfig/grpc_unsecure.pc %{_libdir}/cmake/grpc %{_libdir}/libgrpc++.so %{_libdir}/libgrpc++_alts.so %{_libdir}/libgrpc++_error_details.so %{_libdir}/libgrpc++_reflection.so %{_libdir}/libgrpc++_unsecure.so %{_libdir}/libgrpc_plugin_support.so %{_includedir}/grpc++ %{_libdir}/pkgconfig/grpc++.pc %{_libdir}/pkgconfig/grpc++_unsecure.pc %{_libdir}/libgrpcpp_channelz.so %{_includedir}/grpcpp %files -n python3-grpcio %license LICENSE NOTICE.txt %{python3_sitearch}/grpc %{python3_sitearch}/grpcio-%{version}-py%{python3_version}.egg-info %files -n python3-grpcio-tools %{python3_sitearch}/grpc_tools %{python3_sitearch}/grpcio_tools-%{version}-py%{python3_version}.egg-info %if %{without bootstrap} %files -n python3-grpcio-admin %{python3_sitelib}/grpc_admin %{python3_sitelib}/grpcio_admin-%{version}-py%{python3_version}.egg-info %endif %files -n python3-grpcio-channelz %{python3_sitelib}/grpc_channelz %{python3_sitelib}/grpcio_channelz-%{version}-py%{python3_version}.egg-info %if %{without bootstrap} %files -n python3-grpcio-csds %{python3_sitelib}/grpc_csds %{python3_sitelib}/grpcio_csds-%{version}-py%{python3_version}.egg-info %endif %files -n python3-grpcio-health-checking %{python3_sitelib}/grpc_health %{python3_sitelib}/grpcio_health_checking-%{version}-py%{python3_version}.egg-info %files -n python3-grpcio-reflection %{python3_sitelib}/grpc_reflection %{python3_sitelib}/grpcio_reflection-%{version}-py%{python3_version}.egg-info %files -n python3-grpcio-status %{python3_sitelib}/grpc_status %{python3_sitelib}/grpcio_status-%{version}-py%{python3_version}.egg-info %files -n python3-grpcio-testing %{python3_sitelib}/grpc_testing %{python3_sitelib}/grpcio_testing-%{version}-py%{python3_version}.egg-info %changelog * Tue Oct 26 2021 Benjamin A. Beasley 1.41.1-3 - Add explicit Conflicts with libgpr for now (RHBZ#2017576) * Tue Oct 26 2021 Benjamin A. Beasley 1.41.1-2 - Fix mixed spaces and tabs in spec file * Tue Oct 26 2021 Benjamin A. Beasley 1.41.1-1 - Update to 1.41.1 (close RHBZ#20172232) * Tue Oct 26 2021 Benjamin A. Beasley 1.41.0-4 - Reduce macro indirection in the spec file * Mon Oct 25 2021 Adrian Reber 1.41.0-3 - Rebuilt for protobuf 3.18.1 * Tue Oct 12 2021 Benjamin A. Beasley 1.41.0-2 - Update failing/skipped tests * Wed Oct 06 2021 Benjamin A. Beasley 1.41.0-1 - Update to 1.41.0 * Thu Sep 30 2021 Benjamin A. Beasley 1.40.0-3 - Add missing python3-grpcio+protobuf extras metapackage * Tue Sep 28 2021 Benjamin A. Beasley 1.40.0-2 - Drop HTML documentation * Fri Sep 17 2021 Benjamin A. Beasley 1.40.0-1 - Update to 1.40.0 (close RHBZ#2002019) * Wed Sep 15 2021 Benjamin A. Beasley 1.39.1-10 - Trivial fix to grpc_cli-call man page * Tue Sep 14 2021 Benjamin A. Beasley 1.39.1-9 - Adapt to google-benchmark 1.6.0 * Tue Sep 14 2021 Sahana Prasad 1.39.1-8 - Rebuilt with OpenSSL 3.0.0 * Mon Aug 23 2021 Benjamin A. Beasley 1.39.1-7 - Update some spec file comments * Fri Aug 20 2021 Benjamin A. Beasley 1.39.1-6 - Remove arguably-excessive use of the %%{name} macro * Fri Aug 20 2021 Benjamin A. Beasley 1.39.1-5 - No files need CRNL line ending fixes anymore * Fri Aug 20 2021 Benjamin A. Beasley 1.39.1-4 - Spiff up shebang-fixing snippet * Fri Aug 20 2021 Benjamin A. Beasley 1.39.1-3 - Remove executable permissions from more non-script sources, and send a PR upstream * Fri Aug 20 2021 Benjamin A. Beasley 1.39.1-2 - Some minor spec file cleanup * Thu Aug 19 2021 Benjamin A. Beasley 1.39.1-1 - Update to grpc 1.39.1 (close RHBZ#1993554) * Thu Aug 19 2021 Benjamin A. Beasley 1.39.0-3 - More updates to documented/skipped test failures * Fri Aug 06 2021 Benjamin A. Beasley 1.39.0-2 - Some updates to documented/skipped test failures * Tue Aug 03 2021 Benjamin A. Beasley 1.39.0-1 - Update to 1.39.0 * Wed Jul 21 2021 Benjamin A. Beasley 1.37.1-10 - Simplify core test exclusion (no more useless use of cat) * Fri Jul 9 2021 Benjamin A. Beasley - 1.37.1-8 - Use googletest 1.11.0 * Mon Jun 14 2021 Benjamin A. Beasley - 1.37.1-7 - Add BR on xxhash-static since we use it as a header-only library * Thu Jun 10 2021 Rich Mattes - 1.37.1-6 - Rebuild for abseil-cpp-20210324.2 * Thu Jun 10 2021 Stephen Gallagher - 1.37.1-5 - Fix builds against Python 3.10 on ELN/RHEL as well * Thu Jun 10 2021 Benjamin A. Beasley - 1.37.1-4 - Since it turns out xxhash is used as a header-only library, we can stop patching the source to unbundle it; removing the bundled copy suffices * Fri Jun 04 2021 Python Maint - 1.37.1-3 - Rebuilt for Python 3.10 * Fri May 21 2021 Benjamin A. Beasley - 1.37.1-2 - Use full gRPC_{CPP,CSHARP}_SOVERSION in file globs * Tue May 11 2021 Benjamin A. Beasley - 1.37.1-1 - General: * New version 1.37.1 * Drop patches that were upstreamed since the last packaged release, were backported from upstream in the first place, or have otherwise been obsoleted by upstream changes. * Rebase/update remaining patches as needed * Drop Fedora 32 compatibility * Add man pages for grpc_cli - C (core) and C++ (cpp): * Switch to CMake build system * Build with C++17 for compatibility with the abseil-cpp package in Fedora * Add various Requires to -devel subpackage * Tue Apr 06 2021 Benjamin A. Beasley - 1.26.0-15 - General: * Do not use %%exclude for unpackaged files (RPM 4.17 compatibility) - Python: * Stop using %%pyproject_buildrequires, since it is difficult to fit the pyproject-rpm-macros build and install macros into this package, and Miro Hrončok has advised that “mixing %%pyproject_buildrequires with %%py3_build/%%py3_install is generally not a supported way of building Python packages.” * Thu Mar 25 2021 Benjamin A. Beasley - 1.26.0-14 - General: * Improved googletest source URL (better tarball name) * Tue Mar 23 2021 Benjamin A. Beasley - 1.26.0-13 - General: * Replace * with • in descriptions * Use cmake() dependencies first, and pkgconfig() dependencies second, where available * Drop explicit pkgconfig BR * Fix the directory in which CMake installs pkgconfig files * Improved CMake options * Build the Doxygen reference manuals - C (core) and C++ (cpp): * Let the -devel package require cmake-filesystem * Allow building tests with our own copy of gtest/gmock, which will become mandatory when we depend on abseil-cpp and switch to C++17 * Fix a link error in the core tests when using CMake * Manually install grpc_cli (CMake) * Add CMake files to the files list for the -devel package * Start running some of the core tests in %%check - Python: * Add several patches required for the tests * BR gevent for gevent_tests * Fix build; in particular, add missing preprocess and build_package_protos steps, without which the packages were missing generated proto modules and were not usable! * Add %%py_provides for Fedora 32 * Drop python3dist(setuptools) BR, redundant with %%pyproject_buildrequires * Start running most of the Python tests in %%check * Merge the python-grpcio-doc subpackage into grpc-doc * Tue Feb 16 2021 Benjamin A. Beasley - 1.26.0-12 - C (core) and C++ (cpp): * Add CMake build support but do not enable it yet; there is still a problem where grpc_cli is only built with the tests, and a linking problem when building the tests * Tue Feb 02 2021 Benjamin A. Beasley - 1.26.0-11 - General: * Update summaries and descriptions * Update License fields to include licenses from bundled components * Fix failure to respect Fedora build flags * Use the system shared certificate bundle instead of shipping our own - CLI: * No longer set rpath $ORIGIN - C (core) and C++ (cpp): * Add c_so_version/cpp_so_version macros * Split out C++ bindings and shared data into subpackages * Drop obsolete ldconfig_scriptlets macro * Stop stripping debugging symbols - Python: * Use generated BR’s * Build and package Python binding documentation * Disable accommodations for older libc’s * Patch out -std=gnu99 flag, which is inappropriate for C++ * Build additional Python packages grpcio_tools, gprcio_channelz, grpcio_health_checking, grpcio_reflection, grpcio_status, and grpcio_testing * Tue Jan 26 2021 Fedora Release Engineering - 1.26.0-10 - Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild * Thu Jan 14 08:46:34 CET 2021 Adrian Reber - 1.26.0-9 - Rebuilt for protobuf 3.14 * Fri Nov 13 2020 Artem Polishchuk - 1.26.0-8 - build: disable LTO due to rh#1893533 * Thu Sep 24 2020 Adrian Reber - 1.26.0-7 - Rebuilt for protobuf 3.13 * Mon Aug 03 2020 Gwyn Ciesla - 1.26.0-6 - Patches for https://github.com/grpc/grpc/pull/21669 * Tue Jul 28 2020 Fedora Release Engineering - 1.26.0-5 - Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild * Sun Jun 14 2020 Adrian Reber - 1.26.0-4 - Rebuilt for protobuf 3.12 * Tue May 26 2020 Miro Hrončok - 1.26.0-3 - Rebuilt for Python 3.9 * Wed Jan 29 2020 Fedora Release Engineering - 1.26.0-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild * Wed Jan 15 2020 Sergey Avseyev - 1.26.0-1 - Update to 1.26.0 * Thu Dec 19 2019 Orion Poplawski - 1.20.1-5 - Rebuild for protobuf 3.11 * Thu Oct 03 2019 Miro Hrončok - 1.20.1-4 - Rebuilt for Python 3.8.0rc1 (#1748018) * Mon Aug 19 2019 Miro Hrončok - 1.20.1-3 - Rebuilt for Python 3.8 * Thu Jul 25 2019 Fedora Release Engineering - 1.20.1-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild * Fri May 17 2019 Sergey Avseyev - 1.20.1-1 - Update to 1.20.1 * Fri Feb 01 2019 Fedora Release Engineering - 1.18.0-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild * Wed Jan 16 2019 Sergey Avseyev - 1.18.0-1 - Update to 1.18.0 * Mon Dec 17 2018 Igor Gnatenko - 1.17.1-3 - Properly store patch in SRPM * Mon Dec 17 2018 Sergey Avseyev - 1.17.1-2 - Build without ruby plugin for Fedora < 30 (Thanks to Mathieu Bridon) * Fri Dec 14 2018 Sergey Avseyev - 1.17.1-1 - Update to 1.17.1 and package python bindings * Fri Dec 07 2018 Sergey Avseyev - 1.17.0-1 - Initial revision