Warning: Permanently added '2620:52:3:1:dead:beef:cafe:c114' (ED25519) to the list of known hosts. cmd: ['copr-distgit-client', 'sources'] cwd: /var/lib/copr-rpmbuild/workspace/workdir-uaz2osa3/libsearpc rc: 0 stdout: stderr: INFO: Reading stdout from command: git rev-parse --abbrev-ref HEAD INFO: Reading stdout from command: git rev-parse HEAD INFO: Reading sources specification file: sources INFO: Downloading libsearpc-3.3-20230527git783141f.tar.gz INFO: Reading stdout from command: curl --help all INFO: Calling: curl -H Pragma: -o libsearpc-3.3-20230527git783141f.tar.gz --location --connect-timeout 60 --retry 3 --retry-delay 10 --remote-time --show-error --fail --retry-all-errors https://copr-dist-git.fedorainfracloud.org/repo/pkgs/alebastr/seafile-client/libsearpc/libsearpc-3.3-20230527git783141f.tar.gz/md5/d812bc58d40046e72f44a69418da8d19/libsearpc-3.3-20230527git783141f.tar.gz % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 54375 100 54375 0 0 838k 0 --:--:-- --:--:-- --:--:-- 842k INFO: Reading stdout from command: md5sum libsearpc-3.3-20230527git783141f.tar.gz Running (timeout=18000): unbuffer mock --spec /var/lib/copr-rpmbuild/workspace/workdir-uaz2osa3/libsearpc/libsearpc.spec --sources /var/lib/copr-rpmbuild/workspace/workdir-uaz2osa3/libsearpc --resultdir /var/lib/copr-rpmbuild/results --uniqueext 1692252681.379848 -r /var/lib/copr-rpmbuild/results/configs/child.cfg INFO: mock.py version 5.0 starting (python version = 3.11.3, NVR = mock-5.0-1.fc38)... Start: init plugins INFO: tmpfs initialized INFO: selinux enabled INFO: chroot_scan: initialized INFO: compress_logs: initialized Finish: init plugins INFO: Signal handler active Start: run INFO: Start(/var/lib/copr-rpmbuild/workspace/workdir-uaz2osa3/libsearpc/libsearpc.spec) Config(rhel+epel-8-x86_64) Start: clean chroot Finish: clean chroot Mock Version: 5.0 INFO: Mock Version: 5.0 Start: chroot init INFO: mounting tmpfs at /var/lib/mock/rhel+epel-8-x86_64-1692252681.379848/root. INFO: calling preinit hooks INFO: enabled root cache INFO: enabled package manager cache Start: cleaning package manager metadata Finish: cleaning package manager metadata INFO: enabled HW Info plugin INFO: Package manager dnf detected and used (fallback) Start: installing minimal buildroot with dnf No matches found for the following disable plugin patterns: local, spacewalk, versionlock Updating Subscription Management repositories. Unable to read consumer identity This system is not registered with an entitlement server. You can use subscription-manager to register. Copr repository 99 kB/s | 12 kB 00:00 Red Hat Enterprise Linux - BaseOS 24 MB/s | 63 MB 00:02 Red Hat Enterprise Linux - AppStream 48 MB/s | 59 MB 00:01 Red Hat Enterprise Linux - CodeReady Linux Buil 12 MB/s | 9.7 MB 00:00 Extra Packages for Enterprise Linux 8 - x86_64 9.1 MB/s | 16 MB 00:01 Dependencies resolved. =========================================================================================== Package Arch Version Repository Size =========================================================================================== Installing: bash x86_64 4.4.20-4.el8_6 rhel-baseos 1.5 M bzip2 x86_64 1.0.6-26.el8 rhel-baseos 60 k coreutils x86_64 8.30-15.el8 rhel-baseos 1.2 M cpio x86_64 2.12-11.el8 rhel-baseos 266 k diffutils x86_64 3.6-6.el8 rhel-baseos 359 k epel-rpm-macros noarch 8-39 epel 24 k findutils x86_64 1:4.6.0-20.el8 rhel-baseos 528 k gawk x86_64 4.2.1-4.el8 rhel-baseos 1.1 M gcc x86_64 8.5.0-18.el8 rhel-appstream 23 M gcc-c++ x86_64 8.5.0-18.el8 rhel-appstream 12 M grep x86_64 3.1-6.el8 rhel-baseos 274 k gzip x86_64 1.9-13.el8_5 rhel-baseos 167 k info x86_64 6.5-7.el8 rhel-baseos 198 k make x86_64 1:4.2.1-11.el8 rhel-baseos 498 k patch x86_64 2.7.6-11.el8 rhel-baseos 138 k redhat-release x86_64 8.8-0.8.el8 rhel-baseos 45 k redhat-rpm-config noarch 131-1.el8 rhel-appstream 91 k rpm-build x86_64 4.14.3-26.el8 rhel-appstream 174 k sed x86_64 4.5-5.el8 rhel-baseos 298 k tar x86_64 2:1.30-9.el8 rhel-baseos 839 k unzip x86_64 6.0-46.el8 rhel-baseos 196 k util-linux x86_64 2.32.1-42.el8_8 rhel-baseos 2.5 M which x86_64 2.21-18.el8 rhel-baseos 50 k xz x86_64 5.2.4-4.el8_6 rhel-baseos 153 k Installing dependencies: annobin x86_64 10.94-1.el8 rhel-appstream 965 k ansible-srpm-macros noarch 1-8.2.el8 epel 8.6 k audit-libs x86_64 3.0.7-4.el8 rhel-baseos 123 k basesystem noarch 11-5.el8 rhel-baseos 11 k binutils x86_64 2.30-119.el8 rhel-baseos 5.8 M brotli x86_64 1.0.6-3.el8 rhel-baseos 323 k bzip2-libs x86_64 1.0.6-26.el8 rhel-baseos 48 k ca-certificates noarch 2022.2.54-80.2.el8_6 rhel-baseos 921 k chkconfig x86_64 1.19.1-1.el8 rhel-baseos 198 k coreutils-common x86_64 8.30-15.el8 rhel-baseos 2.0 M cpp x86_64 8.5.0-18.el8 rhel-appstream 10 M cracklib x86_64 2.9.6-15.el8 rhel-baseos 93 k cracklib-dicts x86_64 2.9.6-15.el8 rhel-baseos 4.0 M crypto-policies noarch 20221215-1.gitece0092.el8 rhel-baseos 64 k curl x86_64 7.61.1-30.el8_8.3 rhel-baseos 353 k cyrus-sasl-lib x86_64 2.1.27-6.el8_5 rhel-baseos 123 k dwz x86_64 0.12-10.el8 rhel-appstream 109 k efi-srpm-macros noarch 3-3.el8 rhel-appstream 22 k elfutils x86_64 0.188-3.el8 rhel-baseos 544 k elfutils-default-yama-scope noarch 0.188-3.el8 rhel-baseos 52 k elfutils-libelf x86_64 0.188-3.el8 rhel-baseos 231 k elfutils-libs x86_64 0.188-3.el8 rhel-baseos 299 k expat x86_64 2.2.5-11.el8 rhel-baseos 113 k file x86_64 5.33-24.el8 rhel-baseos 77 k file-libs x86_64 5.33-24.el8 rhel-baseos 544 k filesystem x86_64 3.8-6.el8 rhel-baseos 1.1 M fpc-srpm-macros noarch 1.3-1.el8 epel 8.2 k gc x86_64 7.6.4-3.el8 rhel-appstream 109 k gcc-plugin-annobin x86_64 8.5.0-18.el8 rhel-appstream 35 k gdb-headless x86_64 8.2-19.el8 rhel-appstream 3.7 M gdbm x86_64 1:1.18-2.el8 rhel-baseos 130 k gdbm-libs x86_64 1:1.18-2.el8 rhel-baseos 60 k ghc-srpm-macros noarch 1.4.2-7.el8 rhel-appstream 9.4 k glib2 x86_64 2.56.4-161.el8 rhel-baseos 2.5 M glibc x86_64 2.28-225.el8 rhel-baseos 2.2 M glibc-all-langpacks x86_64 2.28-225.el8 rhel-baseos 26 M glibc-common x86_64 2.28-225.el8 rhel-baseos 1.0 M glibc-devel x86_64 2.28-225.el8 rhel-baseos 83 k glibc-gconv-extra x86_64 2.28-225.el8 rhel-baseos 1.5 M glibc-headers x86_64 2.28-225.el8 rhel-baseos 488 k gmp x86_64 1:6.1.2-10.el8 rhel-baseos 321 k gnupg2 x86_64 2.2.20-3.el8_6 rhel-baseos 2.4 M gnutls x86_64 3.6.16-6.el8_7 rhel-baseos 1.0 M go-srpm-macros noarch 2-17.el8 rhel-appstream 13 k guile x86_64 5:2.0.14-7.el8 rhel-appstream 3.5 M ima-evm-utils x86_64 1.3.2-12.el8 rhel-baseos 64 k isl x86_64 0.16.1-6.el8 rhel-appstream 841 k kernel-headers x86_64 4.18.0-477.21.1.el8_8 rhel-baseos 11 M keyutils-libs x86_64 1.5.10-9.el8 rhel-baseos 34 k krb5-libs x86_64 1.18.2-25.el8_8 rhel-baseos 842 k libacl x86_64 2.2.53-1.el8 rhel-baseos 35 k libarchive x86_64 3.3.3-5.el8 rhel-baseos 360 k libassuan x86_64 2.5.1-3.el8 rhel-baseos 83 k libatomic_ops x86_64 7.6.2-3.el8 rhel-appstream 38 k libattr x86_64 2.4.48-3.el8 rhel-baseos 27 k libbabeltrace x86_64 1.5.4-4.el8 rhel-baseos 200 k libblkid x86_64 2.32.1-42.el8_8 rhel-baseos 220 k libcap x86_64 2.48-5.el8_8 rhel-baseos 74 k libcap-ng x86_64 0.7.11-1.el8 rhel-baseos 33 k libcom_err x86_64 1.45.6-5.el8 rhel-baseos 49 k libcurl x86_64 7.61.1-30.el8_8.3 rhel-baseos 303 k libdb x86_64 5.3.28-42.el8_4 rhel-baseos 751 k libdb-utils x86_64 5.3.28-42.el8_4 rhel-baseos 150 k libfdisk x86_64 2.32.1-42.el8_8 rhel-baseos 253 k libffi x86_64 3.1-24.el8 rhel-baseos 38 k libgcc x86_64 8.5.0-18.el8 rhel-baseos 81 k libgcrypt x86_64 1.8.5-7.el8_6 rhel-baseos 463 k libgomp x86_64 8.5.0-18.el8 rhel-baseos 208 k libgpg-error x86_64 1.31-1.el8 rhel-baseos 242 k libidn2 x86_64 2.2.0-1.el8 rhel-baseos 94 k libipt x86_64 1.6.1-8.el8 rhel-appstream 50 k libksba x86_64 1.3.5-9.el8_7 rhel-baseos 134 k libmount x86_64 2.32.1-42.el8_8 rhel-baseos 236 k libmpc x86_64 1.1.0-9.1.el8 rhel-appstream 61 k libnghttp2 x86_64 1.33.0-3.el8_2.1 rhel-baseos 77 k libnsl2 x86_64 1.2.0-2.20180605git4a062cf.el8 rhel-baseos 58 k libpkgconf x86_64 1.4.2-1.el8 rhel-baseos 35 k libpsl x86_64 0.20.2-6.el8 rhel-baseos 61 k libpwquality x86_64 1.4.4-6.el8 rhel-baseos 107 k libselinux x86_64 2.9-8.el8 rhel-baseos 166 k libsemanage x86_64 2.9-9.el8_6 rhel-baseos 168 k libsepol x86_64 2.9-3.el8 rhel-baseos 340 k libsigsegv x86_64 2.11-5.el8 rhel-baseos 30 k libsmartcols x86_64 2.32.1-42.el8_8 rhel-baseos 179 k libssh x86_64 0.9.6-10.el8_8 rhel-baseos 219 k libssh-config noarch 0.9.6-10.el8_8 rhel-baseos 20 k libstdc++ x86_64 8.5.0-18.el8 rhel-baseos 455 k libstdc++-devel x86_64 8.5.0-18.el8 rhel-appstream 2.1 M libtasn1 x86_64 4.13-4.el8_7 rhel-baseos 76 k libtirpc x86_64 1.1.4-8.el8 rhel-baseos 113 k libtool-ltdl x86_64 2.4.6-25.el8 rhel-baseos 58 k libunistring x86_64 0.9.9-3.el8 rhel-baseos 422 k libusbx x86_64 1.0.23-4.el8 rhel-baseos 74 k libutempter x86_64 1.1.6-14.el8 rhel-baseos 32 k libuuid x86_64 2.32.1-42.el8_8 rhel-baseos 98 k libverto x86_64 0.3.2-2.el8 rhel-baseos 24 k libxcrypt x86_64 4.1.1-6.el8 rhel-baseos 73 k libxcrypt-devel x86_64 4.1.1-6.el8 rhel-baseos 25 k libxml2 x86_64 2.9.7-16.el8_8.1 rhel-baseos 697 k libzstd x86_64 1.4.4-1.el8 rhel-baseos 266 k lua-libs x86_64 5.3.4-12.el8 rhel-baseos 118 k lua-srpm-macros noarch 1-3.el8 epel 8.1 k lz4-libs x86_64 1.8.3-3.el8_4 rhel-baseos 66 k mpfr x86_64 3.1.6-1.el8 rhel-baseos 221 k ncurses x86_64 6.1-9.20180224.el8 rhel-baseos 387 k ncurses-base noarch 6.1-9.20180224.el8 rhel-baseos 81 k ncurses-libs x86_64 6.1-9.20180224.el8 rhel-baseos 334 k nettle x86_64 3.4.1-7.el8 rhel-baseos 301 k npth x86_64 1.5-4.el8 rhel-baseos 26 k ocaml-srpm-macros noarch 5-4.el8 rhel-appstream 9.5 k openblas-srpm-macros noarch 2-2.el8 rhel-appstream 8.0 k openldap x86_64 2.4.46-18.el8 rhel-baseos 352 k openssl-libs x86_64 1:1.1.1k-9.el8_7 rhel-baseos 1.5 M p11-kit x86_64 0.23.22-1.el8 rhel-baseos 324 k p11-kit-trust x86_64 0.23.22-1.el8 rhel-baseos 137 k pam x86_64 1.3.1-25.el8 rhel-baseos 746 k pcre x86_64 8.42-6.el8 rhel-baseos 211 k pcre2 x86_64 10.32-3.el8_6 rhel-baseos 247 k perl-srpm-macros noarch 1-25.el8 rhel-appstream 11 k pkgconf x86_64 1.4.2-1.el8 rhel-baseos 38 k pkgconf-m4 noarch 1.4.2-1.el8 rhel-baseos 17 k pkgconf-pkg-config x86_64 1.4.2-1.el8 rhel-baseos 15 k platform-python x86_64 3.6.8-51.el8_8.1 rhel-baseos 86 k platform-python-setuptools noarch 39.2.0-7.el8 rhel-baseos 632 k popt x86_64 1.18-1.el8 rhel-baseos 61 k publicsuffix-list-dafsa noarch 20180723-1.el8 rhel-baseos 56 k python-rpm-macros noarch 3-45.el8 rhel-appstream 16 k python-srpm-macros noarch 3-45.el8 rhel-appstream 16 k python3-libs x86_64 3.6.8-51.el8_8.1 rhel-baseos 7.8 M python3-pip-wheel noarch 9.0.3-22.el8 rhel-baseos 895 k python3-rpm-macros noarch 3-45.el8 rhel-appstream 15 k python3-setuptools-wheel noarch 39.2.0-7.el8 rhel-baseos 289 k qt5-srpm-macros noarch 5.15.3-1.el8 rhel-appstream 11 k readline x86_64 7.0-10.el8 rhel-baseos 199 k rpm x86_64 4.14.3-26.el8 rhel-baseos 544 k rpm-build-libs x86_64 4.14.3-26.el8 rhel-baseos 157 k rpm-libs x86_64 4.14.3-26.el8 rhel-baseos 345 k rust-srpm-macros noarch 5-2.el8 rhel-appstream 9.3 k setup noarch 2.12.2-9.el8 rhel-baseos 181 k shadow-utils x86_64 2:4.6-17.el8 rhel-baseos 1.2 M sqlite-libs x86_64 3.26.0-18.el8_8 rhel-baseos 581 k systemd-libs x86_64 239-74.el8_8.3 rhel-baseos 1.1 M tpm2-tss x86_64 2.3.2-4.el8 rhel-baseos 275 k tzdata noarch 2023c-1.el8 rhel-baseos 477 k xz-libs x86_64 5.2.4-4.el8_6 rhel-baseos 94 k zip x86_64 3.0-23.el8 rhel-baseos 270 k zlib x86_64 1.2.11-21.el8_7 rhel-baseos 103 k zstd x86_64 1.4.4-1.el8 rhel-appstream 393 k Transaction Summary =========================================================================================== Install 172 Packages Total download size: 162 M Installed size: 813 M Downloading Packages: (1/172): libutempter-1.1.6-14.el8.x86_64.rpm 212 kB/s | 32 kB 00:00 (2/172): libassuan-2.5.1-3.el8.x86_64.rpm 426 kB/s | 83 kB 00:00 (3/172): cracklib-2.9.6-15.el8.x86_64.rpm 438 kB/s | 93 kB 00:00 (4/172): grep-3.1-6.el8.x86_64.rpm 2.2 MB/s | 274 kB 00:00 (5/172): pkgconf-1.4.2-1.el8.x86_64.rpm 572 kB/s | 38 kB 00:00 (6/172): readline-7.0-10.el8.x86_64.rpm 1.6 MB/s | 199 kB 00:00 (7/172): libsigsegv-2.11-5.el8.x86_64.rpm 400 kB/s | 30 kB 00:00 (8/172): libattr-2.4.48-3.el8.x86_64.rpm 398 kB/s | 27 kB 00:00 (9/172): npth-1.5-4.el8.x86_64.rpm 138 kB/s | 26 kB 00:00 (10/172): pkgconf-pkg-config-1.4.2-1.el8.x86_64 208 kB/s | 15 kB 00:00 (11/172): cracklib-dicts-2.9.6-15.el8.x86_64.rp 20 MB/s | 4.0 MB 00:00 (12/172): bzip2-libs-1.0.6-26.el8.x86_64.rpm 707 kB/s | 48 kB 00:00 (13/172): mpfr-3.1.6-1.el8.x86_64.rpm 2.7 MB/s | 221 kB 00:00 (14/172): zip-3.0-23.el8.x86_64.rpm 3.7 MB/s | 270 kB 00:00 (15/172): bzip2-1.0.6-26.el8.x86_64.rpm 875 kB/s | 60 kB 00:00 (16/172): libnsl2-1.2.0-2.20180605git4a062cf.el 694 kB/s | 58 kB 00:00 (17/172): libunistring-0.9.9-3.el8.x86_64.rpm 3.2 MB/s | 422 kB 00:00 (18/172): pkgconf-m4-1.4.2-1.el8.noarch.rpm 211 kB/s | 17 kB 00:00 (19/172): libpkgconf-1.4.2-1.el8.x86_64.rpm 217 kB/s | 35 kB 00:00 (20/172): findutils-4.6.0-20.el8.x86_64.rpm 5.4 MB/s | 528 kB 00:00 (21/172): basesystem-11-5.el8.noarch.rpm 128 kB/s | 11 kB 00:00 (22/172): libacl-2.2.53-1.el8.x86_64.rpm 218 kB/s | 35 kB 00:00 (23/172): libtool-ltdl-2.4.6-25.el8.x86_64.rpm 730 kB/s | 58 kB 00:00 (24/172): publicsuffix-list-dafsa-20180723-1.el 145 kB/s | 56 kB 00:00 (25/172): libgpg-error-1.31-1.el8.x86_64.rpm 1.5 MB/s | 242 kB 00:00 (26/172): diffutils-3.6-6.el8.x86_64.rpm 3.7 MB/s | 359 kB 00:00 (27/172): patch-2.7.6-11.el8.x86_64.rpm 1.3 MB/s | 138 kB 00:00 (28/172): libidn2-2.2.0-1.el8.x86_64.rpm 632 kB/s | 94 kB 00:00 (29/172): gmp-6.1.2-10.el8.x86_64.rpm 1.1 MB/s | 321 kB 00:00 (30/172): libnghttp2-1.33.0-3.el8_2.1.x86_64.rp 978 kB/s | 77 kB 00:00 (31/172): libzstd-1.4.4-1.el8.x86_64.rpm 2.0 MB/s | 266 kB 00:00 (32/172): libusbx-1.0.23-4.el8.x86_64.rpm 483 kB/s | 74 kB 00:00 (33/172): p11-kit-trust-0.23.22-1.el8.x86_64.rp 881 kB/s | 137 kB 00:00 (34/172): libpsl-0.20.2-6.el8.x86_64.rpm 586 kB/s | 61 kB 00:00 (35/172): popt-1.18-1.el8.x86_64.rpm 635 kB/s | 61 kB 00:00 (36/172): brotli-1.0.6-3.el8.x86_64.rpm 4.2 MB/s | 323 kB 00:00 (37/172): lz4-libs-1.8.3-3.el8_4.x86_64.rpm 830 kB/s | 66 kB 00:00 (38/172): p11-kit-0.23.22-1.el8.x86_64.rpm 4.1 MB/s | 324 kB 00:00 (39/172): ima-evm-utils-1.3.2-12.el8.x86_64.rpm 496 kB/s | 64 kB 00:00 (40/172): libxcrypt-devel-4.1.1-6.el8.x86_64.rp 207 kB/s | 25 kB 00:00 (41/172): tpm2-tss-2.3.2-4.el8.x86_64.rpm 2.6 MB/s | 275 kB 00:00 (42/172): pcre-8.42-6.el8.x86_64.rpm 2.3 MB/s | 211 kB 00:00 (43/172): openldap-2.4.46-18.el8.x86_64.rpm 4.4 MB/s | 352 kB 00:00 (44/172): ncurses-libs-6.1-9.20180224.el8.x86_6 4.3 MB/s | 334 kB 00:00 (45/172): nettle-3.4.1-7.el8.x86_64.rpm 2.8 MB/s | 301 kB 00:00 (46/172): libdb-utils-5.3.28-42.el8_4.x86_64.rp 947 kB/s | 150 kB 00:00 (47/172): filesystem-3.8-6.el8.x86_64.rpm 11 MB/s | 1.1 MB 00:00 (48/172): libxcrypt-4.1.1-6.el8.x86_64.rpm 445 kB/s | 73 kB 00:00 (49/172): libcap-ng-0.7.11-1.el8.x86_64.rpm 430 kB/s | 33 kB 00:00 (50/172): ncurses-6.1-9.20180224.el8.x86_64.rpm 4.2 MB/s | 387 kB 00:00 (51/172): chkconfig-1.19.1-1.el8.x86_64.rpm 1.1 MB/s | 198 kB 00:00 (52/172): libsepol-2.9-3.el8.x86_64.rpm 3.8 MB/s | 340 kB 00:00 (53/172): libdb-5.3.28-42.el8_4.x86_64.rpm 2.7 MB/s | 751 kB 00:00 (54/172): gzip-1.9-13.el8_5.x86_64.rpm 900 kB/s | 167 kB 00:00 (55/172): keyutils-libs-1.5.10-9.el8.x86_64.rpm 271 kB/s | 34 kB 00:00 (56/172): cyrus-sasl-lib-2.1.27-6.el8_5.x86_64. 1.4 MB/s | 123 kB 00:00 (57/172): ncurses-base-6.1-9.20180224.el8.noarc 528 kB/s | 81 kB 00:00 (58/172): lua-libs-5.3.4-12.el8.x86_64.rpm 812 kB/s | 118 kB 00:00 (59/172): cpio-2.12-11.el8.x86_64.rpm 2.5 MB/s | 266 kB 00:00 (60/172): sed-4.5-5.el8.x86_64.rpm 1.4 MB/s | 298 kB 00:00 (61/172): python3-pip-wheel-9.0.3-22.el8.noarch 5.0 MB/s | 895 kB 00:00 (62/172): make-4.2.1-11.el8.x86_64.rpm 2.3 MB/s | 498 kB 00:00 (63/172): xz-libs-5.2.4-4.el8_6.x86_64.rpm 1.0 MB/s | 94 kB 00:00 (64/172): gawk-4.2.1-4.el8.x86_64.rpm 6.2 MB/s | 1.1 MB 00:00 (65/172): info-6.5-7.el8.x86_64.rpm 2.1 MB/s | 198 kB 00:00 (66/172): xz-5.2.4-4.el8_6.x86_64.rpm 791 kB/s | 153 kB 00:00 (67/172): unzip-6.0-46.el8.x86_64.rpm 2.4 MB/s | 196 kB 00:00 (68/172): libverto-0.3.2-2.el8.x86_64.rpm 371 kB/s | 24 kB 00:00 (69/172): libbabeltrace-1.5.4-4.el8.x86_64.rpm 1.7 MB/s | 200 kB 00:00 (70/172): gdbm-libs-1.18-2.el8.x86_64.rpm 819 kB/s | 60 kB 00:00 (71/172): gnupg2-2.2.20-3.el8_6.x86_64.rpm 15 MB/s | 2.4 MB 00:00 (72/172): libtirpc-1.1.4-8.el8.x86_64.rpm 710 kB/s | 113 kB 00:00 (73/172): ca-certificates-2022.2.54-80.2.el8_6. 6.1 MB/s | 921 kB 00:00 (74/172): pcre2-10.32-3.el8_6.x86_64.rpm 3.0 MB/s | 247 kB 00:00 (75/172): libcom_err-1.45.6-5.el8.x86_64.rpm 681 kB/s | 49 kB 00:00 (76/172): libgcrypt-1.8.5-7.el8_6.x86_64.rpm 3.8 MB/s | 463 kB 00:00 (77/172): libsemanage-2.9-9.el8_6.x86_64.rpm 2.1 MB/s | 168 kB 00:00 (78/172): which-2.21-18.el8.x86_64.rpm 519 kB/s | 50 kB 00:00 (79/172): gdbm-1.18-2.el8.x86_64.rpm 1.4 MB/s | 130 kB 00:00 (80/172): gnutls-3.6.16-6.el8_7.x86_64.rpm 11 MB/s | 1.0 MB 00:00 (81/172): tzdata-2023c-1.el8.noarch.rpm 5.1 MB/s | 477 kB 00:00 (82/172): bash-4.4.20-4.el8_6.x86_64.rpm 5.8 MB/s | 1.5 MB 00:00 (83/172): libtasn1-4.13-4.el8_7.x86_64.rpm 811 kB/s | 76 kB 00:00 (84/172): openssl-libs-1.1.1k-9.el8_7.x86_64.rp 16 MB/s | 1.5 MB 00:00 (85/172): libksba-1.3.5-9.el8_7.x86_64.rpm 1.7 MB/s | 134 kB 00:00 (86/172): zlib-1.2.11-21.el8_7.x86_64.rpm 815 kB/s | 103 kB 00:00 (87/172): audit-libs-3.0.7-4.el8.x86_64.rpm 542 kB/s | 123 kB 00:00 (88/172): shadow-utils-4.6-17.el8.x86_64.rpm 11 MB/s | 1.2 MB 00:00 (89/172): coreutils-8.30-15.el8.x86_64.rpm 11 MB/s | 1.2 MB 00:00 (90/172): crypto-policies-20221215-1.gitece0092 773 kB/s | 64 kB 00:00 (91/172): coreutils-common-8.30-15.el8.x86_64.r 11 MB/s | 2.0 MB 00:00 (92/172): glib2-2.56.4-161.el8.x86_64.rpm 15 MB/s | 2.5 MB 00:00 (93/172): binutils-2.30-119.el8.x86_64.rpm 20 MB/s | 5.8 MB 00:00 (94/172): libselinux-2.9-8.el8.x86_64.rpm 1.8 MB/s | 166 kB 00:00 (95/172): pam-1.3.1-25.el8.x86_64.rpm 7.7 MB/s | 746 kB 00:00 (96/172): rpm-4.14.3-26.el8.x86_64.rpm 4.6 MB/s | 544 kB 00:00 (97/172): glibc-headers-2.28-225.el8.x86_64.rpm 6.6 MB/s | 488 kB 00:00 (98/172): rpm-libs-4.14.3-26.el8.x86_64.rpm 2.8 MB/s | 345 kB 00:00 (99/172): libffi-3.1-24.el8.x86_64.rpm 435 kB/s | 38 kB 00:00 (100/172): elfutils-libs-0.188-3.el8.x86_64.rpm 3.7 MB/s | 299 kB 00:00 (101/172): elfutils-0.188-3.el8.x86_64.rpm 6.7 MB/s | 544 kB 00:00 (102/172): redhat-release-8.8-0.8.el8.x86_64.rp 258 kB/s | 45 kB 00:00 (103/172): glibc-2.28-225.el8.x86_64.rpm 17 MB/s | 2.2 MB 00:00 (104/172): libgomp-8.5.0-18.el8.x86_64.rpm 1.2 MB/s | 208 kB 00:00 (105/172): expat-2.2.5-11.el8.x86_64.rpm 828 kB/s | 113 kB 00:00 (106/172): libgcc-8.5.0-18.el8.x86_64.rpm 897 kB/s | 81 kB 00:00 (107/172): python3-setuptools-wheel-39.2.0-7.el 2.0 MB/s | 289 kB 00:00 (108/172): rpm-build-libs-4.14.3-26.el8.x86_64. 1.9 MB/s | 157 kB 00:00 (109/172): glibc-gconv-extra-2.28-225.el8.x86_6 12 MB/s | 1.5 MB 00:00 (110/172): libpwquality-1.4.4-6.el8.x86_64.rpm 1.4 MB/s | 107 kB 00:00 (111/172): file-libs-5.33-24.el8.x86_64.rpm 5.4 MB/s | 544 kB 00:00 (112/172): setup-2.12.2-9.el8.noarch.rpm 109 kB/s | 181 kB 00:01 (113/172): file-5.33-24.el8.x86_64.rpm 976 kB/s | 77 kB 00:00 (114/172): glibc-devel-2.28-225.el8.x86_64.rpm 59 kB/s | 83 kB 00:01 (115/172): elfutils-default-yama-scope-0.188-3. 684 kB/s | 52 kB 00:00 (116/172): libstdc++-8.5.0-18.el8.x86_64.rpm 2.1 MB/s | 455 kB 00:00 (117/172): platform-python-setuptools-39.2.0-7. 5.3 MB/s | 632 kB 00:00 (118/172): elfutils-libelf-0.188-3.el8.x86_64.r 1.1 MB/s | 231 kB 00:00 (119/172): glibc-common-2.28-225.el8.x86_64.rpm 7.7 MB/s | 1.0 MB 00:00 (120/172): libarchive-3.3.3-5.el8.x86_64.rpm 2.9 MB/s | 360 kB 00:00 (121/172): tar-1.30-9.el8.x86_64.rpm 7.3 MB/s | 839 kB 00:00 (122/172): libfdisk-2.32.1-42.el8_8.x86_64.rpm 2.6 MB/s | 253 kB 00:00 (123/172): glibc-all-langpacks-2.28-225.el8.x86 11 MB/s | 26 MB 00:02 (124/172): util-linux-2.32.1-42.el8_8.x86_64.rp 22 MB/s | 2.5 MB 00:00 (125/172): libsmartcols-2.32.1-42.el8_8.x86_64. 2.3 MB/s | 179 kB 00:00 (126/172): libuuid-2.32.1-42.el8_8.x86_64.rpm 1.3 MB/s | 98 kB 00:00 (127/172): libblkid-2.32.1-42.el8_8.x86_64.rpm 2.4 MB/s | 220 kB 00:00 (128/172): libmount-2.32.1-42.el8_8.x86_64.rpm 2.6 MB/s | 236 kB 00:00 (129/172): platform-python-3.6.8-51.el8_8.1.x86 931 kB/s | 86 kB 00:00 (130/172): krb5-libs-1.18.2-25.el8_8.x86_64.rpm 7.6 MB/s | 842 kB 00:00 (131/172): python3-libs-3.6.8-51.el8_8.1.x86_64 33 MB/s | 7.8 MB 00:00 (132/172): sqlite-libs-3.26.0-18.el8_8.x86_64.r 5.2 MB/s | 581 kB 00:00 (133/172): libssh-0.9.6-10.el8_8.x86_64.rpm 2.2 MB/s | 219 kB 00:00 (134/172): libcurl-7.61.1-30.el8_8.3.x86_64.rpm 4.0 MB/s | 303 kB 00:00 (135/172): libssh-config-0.9.6-10.el8_8.noarch. 159 kB/s | 20 kB 00:00 (136/172): libcap-2.48-5.el8_8.x86_64.rpm 1.0 MB/s | 74 kB 00:00 (137/172): libxml2-2.9.7-16.el8_8.1.x86_64.rpm 4.7 MB/s | 697 kB 00:00 (138/172): systemd-libs-239-74.el8_8.3.x86_64.r 11 MB/s | 1.1 MB 00:00 (139/172): curl-7.61.1-30.el8_8.3.x86_64.rpm 2.8 MB/s | 353 kB 00:00 (140/172): rust-srpm-macros-5-2.el8.noarch.rpm 122 kB/s | 9.3 kB 00:00 (141/172): kernel-headers-4.18.0-477.21.1.el8_8 47 MB/s | 11 MB 00:00 (142/172): ghc-srpm-macros-1.4.2-7.el8.noarch.r 76 kB/s | 9.4 kB 00:00 (143/172): ocaml-srpm-macros-5-4.el8.noarch.rpm 44 kB/s | 9.5 kB 00:00 (144/172): openblas-srpm-macros-2-2.el8.noarch. 53 kB/s | 8.0 kB 00:00 (145/172): perl-srpm-macros-1-25.el8.noarch.rpm 112 kB/s | 11 kB 00:00 (146/172): gc-7.6.4-3.el8.x86_64.rpm 777 kB/s | 109 kB 00:00 (147/172): libatomic_ops-7.6.2-3.el8.x86_64.rpm 197 kB/s | 38 kB 00:00 (148/172): isl-0.16.1-6.el8.x86_64.rpm 7.8 MB/s | 841 kB 00:00 (149/172): guile-2.0.14-7.el8.x86_64.rpm 14 MB/s | 3.5 MB 00:00 (150/172): libipt-1.6.1-8.el8.x86_64.rpm 362 kB/s | 50 kB 00:00 (151/172): zstd-1.4.4-1.el8.x86_64.rpm 3.5 MB/s | 393 kB 00:00 (152/172): efi-srpm-macros-3-3.el8.noarch.rpm 324 kB/s | 22 kB 00:00 (153/172): libmpc-1.1.0-9.1.el8.x86_64.rpm 506 kB/s | 61 kB 00:00 (154/172): go-srpm-macros-2-17.el8.noarch.rpm 96 kB/s | 13 kB 00:00 (155/172): qt5-srpm-macros-5.15.3-1.el8.noarch. 142 kB/s | 11 kB 00:00 (156/172): dwz-0.12-10.el8.x86_64.rpm 727 kB/s | 109 kB 00:00 (157/172): gdb-headless-8.2-19.el8.x86_64.rpm 5.0 MB/s | 3.7 MB 00:00 (158/172): rpm-build-4.14.3-26.el8.x86_64.rpm 1.3 MB/s | 174 kB 00:00 (159/172): annobin-10.94-1.el8.x86_64.rpm 3.5 MB/s | 965 kB 00:00 (160/172): gcc-plugin-annobin-8.5.0-18.el8.x86_ 496 kB/s | 35 kB 00:00 (161/172): redhat-rpm-config-131-1.el8.noarch.r 1.1 MB/s | 91 kB 00:00 (162/172): cpp-8.5.0-18.el8.x86_64.rpm 8.1 MB/s | 10 MB 00:01 (163/172): python-rpm-macros-3-45.el8.noarch.rp 172 kB/s | 16 kB 00:00 (164/172): python3-rpm-macros-3-45.el8.noarch.r 93 kB/s | 15 kB 00:00 (165/172): libstdc++-devel-8.5.0-18.el8.x86_64. 3.8 MB/s | 2.1 MB 00:00 (166/172): gcc-8.5.0-18.el8.x86_64.rpm 11 MB/s | 23 MB 00:02 (167/172): python-srpm-macros-3-45.el8.noarch.r 78 kB/s | 16 kB 00:00 (168/172): ansible-srpm-macros-1-8.2.el8.noarch 249 kB/s | 8.6 kB 00:00 (169/172): fpc-srpm-macros-1.3-1.el8.noarch.rpm 419 kB/s | 8.2 kB 00:00 (170/172): epel-rpm-macros-8-39.noarch.rpm 451 kB/s | 24 kB 00:00 (171/172): lua-srpm-macros-1-3.el8.noarch.rpm 406 kB/s | 8.1 kB 00:00 (172/172): gcc-c++-8.5.0-18.el8.x86_64.rpm 13 MB/s | 12 MB 00:00 -------------------------------------------------------------------------------- Total 15 MB/s | 162 MB 00:10 Red Hat Enterprise Linux - BaseOS 3.1 MB/s | 3.1 kB 00:00 Importing GPG key 0xFD431D51: Userid : "Red Hat, Inc. (release key 2) " Fingerprint: 567E 347A D004 4ADE 55BA 8A5F 199E 2F91 FD43 1D51 From : /usr/share/distribution-gpg-keys/redhat/RPM-GPG-KEY-redhat8-release Key imported successfully Importing GPG key 0x2FA658E0: Userid : "Red Hat, Inc. (auxiliary key) " Fingerprint: 43A6 E49C 4A38 F4BE 9ABF 2A53 4568 9C88 2FA6 58E0 From : /usr/share/distribution-gpg-keys/redhat/RPM-GPG-KEY-redhat8-release Key imported successfully Extra Packages for Enterprise Linux 8 - x86_64 1.6 MB/s | 1.6 kB 00:00 Importing GPG key 0x2F86D6A1: Userid : "Fedora EPEL (8) " Fingerprint: 94E2 79EB 8D8F 25B2 1810 ADF1 21EA 45AB 2F86 D6A1 From : /usr/share/distribution-gpg-keys/epel/RPM-GPG-KEY-EPEL-8 Key imported successfully Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Running scriptlet: filesystem-3.8-6.el8.x86_64 1/1 Preparing : 1/1 Installing : libgcc-8.5.0-18.el8.x86_64 1/172 Running scriptlet: libgcc-8.5.0-18.el8.x86_64 1/172 Installing : python-srpm-macros-3-45.el8.noarch 2/172 Installing : crypto-policies-20221215-1.gitece0092.el8.noarch 3/172 Running scriptlet: crypto-policies-20221215-1.gitece0092.el8.noarch 3/172 Installing : python-rpm-macros-3-45.el8.noarch 4/172 Installing : python3-setuptools-wheel-39.2.0-7.el8.noarch 5/172 Installing : redhat-release-8.8-0.8.el8.x86_64 6/172 Installing : setup-2.12.2-9.el8.noarch 7/172 warning: /etc/hosts created as /etc/hosts.rpmnew Running scriptlet: setup-2.12.2-9.el8.noarch 7/172 Installing : filesystem-3.8-6.el8.x86_64 8/172 Installing : python3-pip-wheel-9.0.3-22.el8.noarch 9/172 Installing : basesystem-11-5.el8.noarch 10/172 Installing : python3-rpm-macros-3-45.el8.noarch 11/172 Installing : fpc-srpm-macros-1.3-1.el8.noarch 12/172 Installing : ansible-srpm-macros-1-8.2.el8.noarch 13/172 Installing : qt5-srpm-macros-5.15.3-1.el8.noarch 14/172 Installing : go-srpm-macros-2-17.el8.noarch 15/172 Installing : perl-srpm-macros-1-25.el8.noarch 16/172 Installing : openblas-srpm-macros-2-2.el8.noarch 17/172 Installing : ghc-srpm-macros-1.4.2-7.el8.noarch 18/172 Installing : ocaml-srpm-macros-5-4.el8.noarch 19/172 Installing : rust-srpm-macros-5-2.el8.noarch 20/172 Installing : kernel-headers-4.18.0-477.21.1.el8_8.x86_64 21/172 Installing : libssh-config-0.9.6-10.el8_8.noarch 22/172 Installing : tzdata-2023c-1.el8.noarch 23/172 Installing : ncurses-base-6.1-9.20180224.el8.noarch 24/172 Installing : pcre2-10.32-3.el8_6.x86_64 25/172 Installing : libselinux-2.9-8.el8.x86_64 26/172 Installing : ncurses-libs-6.1-9.20180224.el8.x86_64 27/172 Installing : glibc-gconv-extra-2.28-225.el8.x86_64 28/172 Running scriptlet: glibc-gconv-extra-2.28-225.el8.x86_64 28/172 Installing : glibc-all-langpacks-2.28-225.el8.x86_64 29/172 Installing : glibc-common-2.28-225.el8.x86_64 30/172 Running scriptlet: glibc-2.28-225.el8.x86_64 31/172 Installing : glibc-2.28-225.el8.x86_64 31/172 Running scriptlet: glibc-2.28-225.el8.x86_64 31/172 Installing : bash-4.4.20-4.el8_6.x86_64 32/172 Running scriptlet: bash-4.4.20-4.el8_6.x86_64 32/172 Installing : libsepol-2.9-3.el8.x86_64 33/172 Running scriptlet: libsepol-2.9-3.el8.x86_64 33/172 Installing : zlib-1.2.11-21.el8_7.x86_64 34/172 Installing : info-6.5-7.el8.x86_64 35/172 Installing : bzip2-libs-1.0.6-26.el8.x86_64 36/172 Installing : gmp-1:6.1.2-10.el8.x86_64 37/172 Running scriptlet: gmp-1:6.1.2-10.el8.x86_64 37/172 Installing : xz-libs-5.2.4-4.el8_6.x86_64 38/172 Installing : libstdc++-8.5.0-18.el8.x86_64 39/172 Running scriptlet: libstdc++-8.5.0-18.el8.x86_64 39/172 Installing : elfutils-libelf-0.188-3.el8.x86_64 40/172 Installing : libxcrypt-4.1.1-6.el8.x86_64 41/172 Installing : mpfr-3.1.6-1.el8.x86_64 42/172 Running scriptlet: mpfr-3.1.6-1.el8.x86_64 42/172 Installing : readline-7.0-10.el8.x86_64 43/172 Running scriptlet: readline-7.0-10.el8.x86_64 43/172 Installing : sqlite-libs-3.26.0-18.el8_8.x86_64 44/172 Installing : libzstd-1.4.4-1.el8.x86_64 45/172 Installing : popt-1.18-1.el8.x86_64 46/172 Installing : libcap-2.48-5.el8_8.x86_64 47/172 Installing : libcom_err-1.45.6-5.el8.x86_64 48/172 Running scriptlet: libcom_err-1.45.6-5.el8.x86_64 48/172 Installing : libuuid-2.32.1-42.el8_8.x86_64 49/172 Running scriptlet: libuuid-2.32.1-42.el8_8.x86_64 49/172 Installing : chkconfig-1.19.1-1.el8.x86_64 50/172 Installing : libunistring-0.9.9-3.el8.x86_64 51/172 Installing : libattr-2.4.48-3.el8.x86_64 52/172 Installing : libacl-2.2.53-1.el8.x86_64 53/172 Installing : sed-4.5-5.el8.x86_64 54/172 Running scriptlet: sed-4.5-5.el8.x86_64 54/172 Installing : libgpg-error-1.31-1.el8.x86_64 55/172 Installing : lua-libs-5.3.4-12.el8.x86_64 56/172 Installing : libffi-3.1-24.el8.x86_64 57/172 Installing : p11-kit-0.23.22-1.el8.x86_64 58/172 Installing : libidn2-2.2.0-1.el8.x86_64 59/172 Installing : libmpc-1.1.0-9.1.el8.x86_64 60/172 Installing : file-libs-5.33-24.el8.x86_64 61/172 Installing : file-5.33-24.el8.x86_64 62/172 Installing : libgcrypt-1.8.5-7.el8_6.x86_64 63/172 Running scriptlet: libgcrypt-1.8.5-7.el8_6.x86_64 63/172 Installing : unzip-6.0-46.el8.x86_64 64/172 Installing : findutils-1:4.6.0-20.el8.x86_64 65/172 Running scriptlet: findutils-1:4.6.0-20.el8.x86_64 65/172 Running scriptlet: glibc-headers-2.28-225.el8.x86_64 66/172 Installing : glibc-headers-2.28-225.el8.x86_64 66/172 Installing : elfutils-default-yama-scope-0.188-3.el8.noarch 67/172 Running scriptlet: elfutils-default-yama-scope-0.188-3.el8.noarch 67/172 Installing : elfutils-libs-0.188-3.el8.x86_64 68/172 Installing : lz4-libs-1.8.3-3.el8_4.x86_64 69/172 Installing : pcre-8.42-6.el8.x86_64 70/172 Installing : grep-3.1-6.el8.x86_64 71/172 Running scriptlet: grep-3.1-6.el8.x86_64 71/172 Installing : libcap-ng-0.7.11-1.el8.x86_64 72/172 Installing : audit-libs-3.0.7-4.el8.x86_64 73/172 Installing : keyutils-libs-1.5.10-9.el8.x86_64 74/172 Installing : gdbm-libs-1:1.18-2.el8.x86_64 75/172 Installing : libtasn1-4.13-4.el8_7.x86_64 76/172 Running scriptlet: libtasn1-4.13-4.el8_7.x86_64 76/172 Installing : p11-kit-trust-0.23.22-1.el8.x86_64 77/172 Running scriptlet: p11-kit-trust-0.23.22-1.el8.x86_64 77/172 Installing : expat-2.2.5-11.el8.x86_64 78/172 Installing : gdbm-1:1.18-2.el8.x86_64 79/172 Installing : libsemanage-2.9-9.el8_6.x86_64 80/172 Installing : xz-5.2.4-4.el8_6.x86_64 81/172 Installing : elfutils-0.188-3.el8.x86_64 82/172 Installing : zip-3.0-23.el8.x86_64 83/172 Installing : cpp-8.5.0-18.el8.x86_64 84/172 Running scriptlet: cpp-8.5.0-18.el8.x86_64 84/172 Installing : libassuan-2.5.1-3.el8.x86_64 85/172 Installing : libksba-1.3.5-9.el8_7.x86_64 86/172 Installing : tar-2:1.30-9.el8.x86_64 87/172 Running scriptlet: tar-2:1.30-9.el8.x86_64 87/172 Installing : patch-2.7.6-11.el8.x86_64 88/172 Installing : dwz-0.12-10.el8.x86_64 89/172 Installing : zstd-1.4.4-1.el8.x86_64 90/172 Installing : libstdc++-devel-8.5.0-18.el8.x86_64 91/172 Installing : libxml2-2.9.7-16.el8_8.1.x86_64 92/172 Installing : nettle-3.4.1-7.el8.x86_64 93/172 Running scriptlet: nettle-3.4.1-7.el8.x86_64 93/172 Installing : gnutls-3.6.16-6.el8_7.x86_64 94/172 Installing : isl-0.16.1-6.el8.x86_64 95/172 Running scriptlet: isl-0.16.1-6.el8.x86_64 95/172 Installing : bzip2-1.0.6-26.el8.x86_64 96/172 Installing : diffutils-3.6-6.el8.x86_64 97/172 Running scriptlet: diffutils-3.6-6.el8.x86_64 97/172 Installing : coreutils-common-8.30-15.el8.x86_64 98/172 Running scriptlet: coreutils-common-8.30-15.el8.x86_64 98/172 Installing : libgomp-8.5.0-18.el8.x86_64 99/172 Running scriptlet: libgomp-8.5.0-18.el8.x86_64 99/172 Installing : libsigsegv-2.11-5.el8.x86_64 100/172 Installing : gawk-4.2.1-4.el8.x86_64 101/172 Installing : npth-1.5-4.el8.x86_64 102/172 Installing : libpkgconf-1.4.2-1.el8.x86_64 103/172 Installing : pkgconf-1.4.2-1.el8.x86_64 104/172 Installing : libtool-ltdl-2.4.6-25.el8.x86_64 105/172 Running scriptlet: libtool-ltdl-2.4.6-25.el8.x86_64 105/172 Installing : libnghttp2-1.33.0-3.el8_2.1.x86_64 106/172 Installing : brotli-1.0.6-3.el8.x86_64 107/172 Installing : ncurses-6.1-9.20180224.el8.x86_64 108/172 Installing : openssl-libs-1:1.1.1k-9.el8_7.x86_64 109/172 Running scriptlet: openssl-libs-1:1.1.1k-9.el8_7.x86_64 109/172 Installing : coreutils-8.30-15.el8.x86_64 110/172 Running scriptlet: ca-certificates-2022.2.54-80.2.el8_6.noarch 111/172 Installing : ca-certificates-2022.2.54-80.2.el8_6.noarch 111/172 Running scriptlet: ca-certificates-2022.2.54-80.2.el8_6.noarch 111/172 Installing : libdb-5.3.28-42.el8_4.x86_64 112/172 Running scriptlet: libdb-5.3.28-42.el8_4.x86_64 112/172 Installing : libblkid-2.32.1-42.el8_8.x86_64 113/172 Running scriptlet: libblkid-2.32.1-42.el8_8.x86_64 113/172 Installing : libmount-2.32.1-42.el8_8.x86_64 114/172 Running scriptlet: libmount-2.32.1-42.el8_8.x86_64 114/172 Installing : systemd-libs-239-74.el8_8.3.x86_64 115/172 Running scriptlet: systemd-libs-239-74.el8_8.3.x86_64 115/172 Installing : gzip-1.9-13.el8_5.x86_64 116/172 Running scriptlet: gzip-1.9-13.el8_5.x86_64 116/172 Installing : cracklib-2.9.6-15.el8.x86_64 117/172 Installing : cracklib-dicts-2.9.6-15.el8.x86_64 118/172 Installing : shadow-utils-2:4.6-17.el8.x86_64 119/172 Installing : binutils-2.30-119.el8.x86_64 120/172 Running scriptlet: binutils-2.30-119.el8.x86_64 120/172 Running scriptlet: libutempter-1.1.6-14.el8.x86_64 121/172 Installing : libutempter-1.1.6-14.el8.x86_64 121/172 Running scriptlet: tpm2-tss-2.3.2-4.el8.x86_64 122/172 Installing : tpm2-tss-2.3.2-4.el8.x86_64 122/172 Running scriptlet: tpm2-tss-2.3.2-4.el8.x86_64 122/172 Installing : ima-evm-utils-1.3.2-12.el8.x86_64 123/172 Installing : libusbx-1.0.23-4.el8.x86_64 124/172 Installing : glib2-2.56.4-161.el8.x86_64 125/172 Installing : libbabeltrace-1.5.4-4.el8.x86_64 126/172 Running scriptlet: libbabeltrace-1.5.4-4.el8.x86_64 126/172 Installing : libfdisk-2.32.1-42.el8_8.x86_64 127/172 Running scriptlet: libfdisk-2.32.1-42.el8_8.x86_64 127/172 Installing : libdb-utils-5.3.28-42.el8_4.x86_64 128/172 Installing : libarchive-3.3.3-5.el8.x86_64 129/172 Installing : cpio-2.12-11.el8.x86_64 130/172 Installing : libverto-0.3.2-2.el8.x86_64 131/172 Installing : krb5-libs-1.18.2-25.el8_8.x86_64 132/172 Installing : libtirpc-1.1.4-8.el8.x86_64 133/172 Running scriptlet: libtirpc-1.1.4-8.el8.x86_64 133/172 Installing : libnsl2-1.2.0-2.20180605git4a062cf.el8.x86_64 134/172 Running scriptlet: libnsl2-1.2.0-2.20180605git4a062cf.el8.x86_64 134/172 Installing : pam-1.3.1-25.el8.x86_64 135/172 Running scriptlet: pam-1.3.1-25.el8.x86_64 135/172 Installing : libpwquality-1.4.4-6.el8.x86_64 136/172 Installing : platform-python-setuptools-39.2.0-7.el8.noarch 137/172 Installing : platform-python-3.6.8-51.el8_8.1.x86_64 138/172 Running scriptlet: platform-python-3.6.8-51.el8_8.1.x86_64 138/172 Installing : python3-libs-3.6.8-51.el8_8.1.x86_64 139/172 Installing : cyrus-sasl-lib-2.1.27-6.el8_5.x86_64 140/172 Running scriptlet: cyrus-sasl-lib-2.1.27-6.el8_5.x86_64 140/172 Installing : openldap-2.4.46-18.el8.x86_64 141/172 Installing : gnupg2-2.2.20-3.el8_6.x86_64 142/172 Installing : libssh-0.9.6-10.el8_8.x86_64 143/172 Installing : libsmartcols-2.32.1-42.el8_8.x86_64 144/172 Running scriptlet: libsmartcols-2.32.1-42.el8_8.x86_64 144/172 Installing : libatomic_ops-7.6.2-3.el8.x86_64 145/172 Installing : gc-7.6.4-3.el8.x86_64 146/172 Installing : guile-5:2.0.14-7.el8.x86_64 147/172 Running scriptlet: guile-5:2.0.14-7.el8.x86_64 147/172 Installing : libipt-1.6.1-8.el8.x86_64 148/172 Installing : pkgconf-m4-1.4.2-1.el8.noarch 149/172 Installing : pkgconf-pkg-config-1.4.2-1.el8.x86_64 150/172 Installing : glibc-devel-2.28-225.el8.x86_64 151/172 Running scriptlet: glibc-devel-2.28-225.el8.x86_64 151/172 Installing : libxcrypt-devel-4.1.1-6.el8.x86_64 152/172 Installing : gcc-8.5.0-18.el8.x86_64 153/172 Running scriptlet: gcc-8.5.0-18.el8.x86_64 153/172 Installing : annobin-10.94-1.el8.x86_64 154/172 Installing : gcc-plugin-annobin-8.5.0-18.el8.x86_64 155/172 Installing : publicsuffix-list-dafsa-20180723-1.el8.noarch 156/172 Installing : libpsl-0.20.2-6.el8.x86_64 157/172 Installing : libcurl-7.61.1-30.el8_8.3.x86_64 158/172 Installing : curl-7.61.1-30.el8_8.3.x86_64 159/172 Installing : rpm-libs-4.14.3-26.el8.x86_64 160/172 Running scriptlet: rpm-libs-4.14.3-26.el8.x86_64 160/172 Installing : rpm-4.14.3-26.el8.x86_64 161/172 Installing : efi-srpm-macros-3-3.el8.noarch 162/172 Installing : redhat-rpm-config-131-1.el8.noarch 163/172 Running scriptlet: redhat-rpm-config-131-1.el8.noarch 163/172 Installing : lua-srpm-macros-1-3.el8.noarch 164/172 Installing : rpm-build-libs-4.14.3-26.el8.x86_64 165/172 Running scriptlet: rpm-build-libs-4.14.3-26.el8.x86_64 165/172 Installing : gdb-headless-8.2-19.el8.x86_64 166/172 Installing : rpm-build-4.14.3-26.el8.x86_64 167/172 Installing : epel-rpm-macros-8-39.noarch 168/172 Installing : gcc-c++-8.5.0-18.el8.x86_64 169/172 Installing : util-linux-2.32.1-42.el8_8.x86_64 170/172 Running scriptlet: util-linux-2.32.1-42.el8_8.x86_64 170/172 Installing : which-2.21-18.el8.x86_64 171/172 Installing : make-1:4.2.1-11.el8.x86_64 172/172 Running scriptlet: make-1:4.2.1-11.el8.x86_64 172/172 Running scriptlet: filesystem-3.8-6.el8.x86_64 172/172 Running scriptlet: glibc-all-langpacks-2.28-225.el8.x86_64 172/172 Running scriptlet: ca-certificates-2022.2.54-80.2.el8_6.noarch 172/172 Running scriptlet: guile-5:2.0.14-7.el8.x86_64 172/172 Running scriptlet: make-1:4.2.1-11.el8.x86_64 172/172 Verifying : libassuan-2.5.1-3.el8.x86_64 1/172 Verifying : cracklib-2.9.6-15.el8.x86_64 2/172 Verifying : libutempter-1.1.6-14.el8.x86_64 3/172 Verifying : grep-3.1-6.el8.x86_64 4/172 Verifying : readline-7.0-10.el8.x86_64 5/172 Verifying : pkgconf-1.4.2-1.el8.x86_64 6/172 Verifying : libsigsegv-2.11-5.el8.x86_64 7/172 Verifying : npth-1.5-4.el8.x86_64 8/172 Verifying : cracklib-dicts-2.9.6-15.el8.x86_64 9/172 Verifying : libattr-2.4.48-3.el8.x86_64 10/172 Verifying : pkgconf-pkg-config-1.4.2-1.el8.x86_64 11/172 Verifying : bzip2-libs-1.0.6-26.el8.x86_64 12/172 Verifying : mpfr-3.1.6-1.el8.x86_64 13/172 Verifying : zip-3.0-23.el8.x86_64 14/172 Verifying : libunistring-0.9.9-3.el8.x86_64 15/172 Verifying : bzip2-1.0.6-26.el8.x86_64 16/172 Verifying : libnsl2-1.2.0-2.20180605git4a062cf.el8.x86_64 17/172 Verifying : libpkgconf-1.4.2-1.el8.x86_64 18/172 Verifying : publicsuffix-list-dafsa-20180723-1.el8.noarch 19/172 Verifying : pkgconf-m4-1.4.2-1.el8.noarch 20/172 Verifying : findutils-1:4.6.0-20.el8.x86_64 21/172 Verifying : libacl-2.2.53-1.el8.x86_64 22/172 Verifying : basesystem-11-5.el8.noarch 23/172 Verifying : libtool-ltdl-2.4.6-25.el8.x86_64 24/172 Verifying : libgpg-error-1.31-1.el8.x86_64 25/172 Verifying : gmp-1:6.1.2-10.el8.x86_64 26/172 Verifying : diffutils-3.6-6.el8.x86_64 27/172 Verifying : libidn2-2.2.0-1.el8.x86_64 28/172 Verifying : patch-2.7.6-11.el8.x86_64 29/172 Verifying : libnghttp2-1.33.0-3.el8_2.1.x86_64 30/172 Verifying : libzstd-1.4.4-1.el8.x86_64 31/172 Verifying : libusbx-1.0.23-4.el8.x86_64 32/172 Verifying : p11-kit-trust-0.23.22-1.el8.x86_64 33/172 Verifying : libpsl-0.20.2-6.el8.x86_64 34/172 Verifying : popt-1.18-1.el8.x86_64 35/172 Verifying : brotli-1.0.6-3.el8.x86_64 36/172 Verifying : lz4-libs-1.8.3-3.el8_4.x86_64 37/172 Verifying : ima-evm-utils-1.3.2-12.el8.x86_64 38/172 Verifying : p11-kit-0.23.22-1.el8.x86_64 39/172 Verifying : libxcrypt-devel-4.1.1-6.el8.x86_64 40/172 Verifying : tpm2-tss-2.3.2-4.el8.x86_64 41/172 Verifying : pcre-8.42-6.el8.x86_64 42/172 Verifying : openldap-2.4.46-18.el8.x86_64 43/172 Verifying : nettle-3.4.1-7.el8.x86_64 44/172 Verifying : ncurses-libs-6.1-9.20180224.el8.x86_64 45/172 Verifying : libdb-utils-5.3.28-42.el8_4.x86_64 46/172 Verifying : filesystem-3.8-6.el8.x86_64 47/172 Verifying : libxcrypt-4.1.1-6.el8.x86_64 48/172 Verifying : chkconfig-1.19.1-1.el8.x86_64 49/172 Verifying : libcap-ng-0.7.11-1.el8.x86_64 50/172 Verifying : libdb-5.3.28-42.el8_4.x86_64 51/172 Verifying : ncurses-6.1-9.20180224.el8.x86_64 52/172 Verifying : libsepol-2.9-3.el8.x86_64 53/172 Verifying : gzip-1.9-13.el8_5.x86_64 54/172 Verifying : keyutils-libs-1.5.10-9.el8.x86_64 55/172 Verifying : ncurses-base-6.1-9.20180224.el8.noarch 56/172 Verifying : cyrus-sasl-lib-2.1.27-6.el8_5.x86_64 57/172 Verifying : lua-libs-5.3.4-12.el8.x86_64 58/172 Verifying : cpio-2.12-11.el8.x86_64 59/172 Verifying : sed-4.5-5.el8.x86_64 60/172 Verifying : make-1:4.2.1-11.el8.x86_64 61/172 Verifying : python3-pip-wheel-9.0.3-22.el8.noarch 62/172 Verifying : gawk-4.2.1-4.el8.x86_64 63/172 Verifying : xz-libs-5.2.4-4.el8_6.x86_64 64/172 Verifying : xz-5.2.4-4.el8_6.x86_64 65/172 Verifying : info-6.5-7.el8.x86_64 66/172 Verifying : unzip-6.0-46.el8.x86_64 67/172 Verifying : libbabeltrace-1.5.4-4.el8.x86_64 68/172 Verifying : libverto-0.3.2-2.el8.x86_64 69/172 Verifying : gdbm-libs-1:1.18-2.el8.x86_64 70/172 Verifying : gnupg2-2.2.20-3.el8_6.x86_64 71/172 Verifying : libtirpc-1.1.4-8.el8.x86_64 72/172 Verifying : ca-certificates-2022.2.54-80.2.el8_6.noarch 73/172 Verifying : pcre2-10.32-3.el8_6.x86_64 74/172 Verifying : libgcrypt-1.8.5-7.el8_6.x86_64 75/172 Verifying : libcom_err-1.45.6-5.el8.x86_64 76/172 Verifying : libsemanage-2.9-9.el8_6.x86_64 77/172 Verifying : bash-4.4.20-4.el8_6.x86_64 78/172 Verifying : which-2.21-18.el8.x86_64 79/172 Verifying : gdbm-1:1.18-2.el8.x86_64 80/172 Verifying : gnutls-3.6.16-6.el8_7.x86_64 81/172 Verifying : tzdata-2023c-1.el8.noarch 82/172 Verifying : libtasn1-4.13-4.el8_7.x86_64 83/172 Verifying : openssl-libs-1:1.1.1k-9.el8_7.x86_64 84/172 Verifying : audit-libs-3.0.7-4.el8.x86_64 85/172 Verifying : libksba-1.3.5-9.el8_7.x86_64 86/172 Verifying : zlib-1.2.11-21.el8_7.x86_64 87/172 Verifying : shadow-utils-2:4.6-17.el8.x86_64 88/172 Verifying : coreutils-8.30-15.el8.x86_64 89/172 Verifying : binutils-2.30-119.el8.x86_64 90/172 Verifying : crypto-policies-20221215-1.gitece0092.el8.noarch 91/172 Verifying : coreutils-common-8.30-15.el8.x86_64 92/172 Verifying : glib2-2.56.4-161.el8.x86_64 93/172 Verifying : libselinux-2.9-8.el8.x86_64 94/172 Verifying : pam-1.3.1-25.el8.x86_64 95/172 Verifying : rpm-4.14.3-26.el8.x86_64 96/172 Verifying : glibc-headers-2.28-225.el8.x86_64 97/172 Verifying : rpm-libs-4.14.3-26.el8.x86_64 98/172 Verifying : redhat-release-8.8-0.8.el8.x86_64 99/172 Verifying : libffi-3.1-24.el8.x86_64 100/172 Verifying : elfutils-libs-0.188-3.el8.x86_64 101/172 Verifying : elfutils-0.188-3.el8.x86_64 102/172 Verifying : libgomp-8.5.0-18.el8.x86_64 103/172 Verifying : expat-2.2.5-11.el8.x86_64 104/172 Verifying : glibc-2.28-225.el8.x86_64 105/172 Verifying : python3-setuptools-wheel-39.2.0-7.el8.noarch 106/172 Verifying : setup-2.12.2-9.el8.noarch 107/172 Verifying : libgcc-8.5.0-18.el8.x86_64 108/172 Verifying : rpm-build-libs-4.14.3-26.el8.x86_64 109/172 Verifying : glibc-gconv-extra-2.28-225.el8.x86_64 110/172 Verifying : glibc-all-langpacks-2.28-225.el8.x86_64 111/172 Verifying : libpwquality-1.4.4-6.el8.x86_64 112/172 Verifying : file-libs-5.33-24.el8.x86_64 113/172 Verifying : glibc-devel-2.28-225.el8.x86_64 114/172 Verifying : file-5.33-24.el8.x86_64 115/172 Verifying : libstdc++-8.5.0-18.el8.x86_64 116/172 Verifying : elfutils-default-yama-scope-0.188-3.el8.noarch 117/172 Verifying : elfutils-libelf-0.188-3.el8.x86_64 118/172 Verifying : platform-python-setuptools-39.2.0-7.el8.noarch 119/172 Verifying : glibc-common-2.28-225.el8.x86_64 120/172 Verifying : libarchive-3.3.3-5.el8.x86_64 121/172 Verifying : tar-2:1.30-9.el8.x86_64 122/172 Verifying : libfdisk-2.32.1-42.el8_8.x86_64 123/172 Verifying : util-linux-2.32.1-42.el8_8.x86_64 124/172 Verifying : libsmartcols-2.32.1-42.el8_8.x86_64 125/172 Verifying : libuuid-2.32.1-42.el8_8.x86_64 126/172 Verifying : libblkid-2.32.1-42.el8_8.x86_64 127/172 Verifying : libmount-2.32.1-42.el8_8.x86_64 128/172 Verifying : python3-libs-3.6.8-51.el8_8.1.x86_64 129/172 Verifying : platform-python-3.6.8-51.el8_8.1.x86_64 130/172 Verifying : krb5-libs-1.18.2-25.el8_8.x86_64 131/172 Verifying : sqlite-libs-3.26.0-18.el8_8.x86_64 132/172 Verifying : libssh-0.9.6-10.el8_8.x86_64 133/172 Verifying : libssh-config-0.9.6-10.el8_8.noarch 134/172 Verifying : libcurl-7.61.1-30.el8_8.3.x86_64 135/172 Verifying : libxml2-2.9.7-16.el8_8.1.x86_64 136/172 Verifying : libcap-2.48-5.el8_8.x86_64 137/172 Verifying : kernel-headers-4.18.0-477.21.1.el8_8.x86_64 138/172 Verifying : systemd-libs-239-74.el8_8.3.x86_64 139/172 Verifying : curl-7.61.1-30.el8_8.3.x86_64 140/172 Verifying : rust-srpm-macros-5-2.el8.noarch 141/172 Verifying : ocaml-srpm-macros-5-4.el8.noarch 142/172 Verifying : ghc-srpm-macros-1.4.2-7.el8.noarch 143/172 Verifying : openblas-srpm-macros-2-2.el8.noarch 144/172 Verifying : perl-srpm-macros-1-25.el8.noarch 145/172 Verifying : libatomic_ops-7.6.2-3.el8.x86_64 146/172 Verifying : gc-7.6.4-3.el8.x86_64 147/172 Verifying : guile-5:2.0.14-7.el8.x86_64 148/172 Verifying : isl-0.16.1-6.el8.x86_64 149/172 Verifying : libipt-1.6.1-8.el8.x86_64 150/172 Verifying : zstd-1.4.4-1.el8.x86_64 151/172 Verifying : libmpc-1.1.0-9.1.el8.x86_64 152/172 Verifying : efi-srpm-macros-3-3.el8.noarch 153/172 Verifying : go-srpm-macros-2-17.el8.noarch 154/172 Verifying : dwz-0.12-10.el8.x86_64 155/172 Verifying : qt5-srpm-macros-5.15.3-1.el8.noarch 156/172 Verifying : gdb-headless-8.2-19.el8.x86_64 157/172 Verifying : gcc-8.5.0-18.el8.x86_64 158/172 Verifying : cpp-8.5.0-18.el8.x86_64 159/172 Verifying : rpm-build-4.14.3-26.el8.x86_64 160/172 Verifying : annobin-10.94-1.el8.x86_64 161/172 Verifying : gcc-plugin-annobin-8.5.0-18.el8.x86_64 162/172 Verifying : redhat-rpm-config-131-1.el8.noarch 163/172 Verifying : python3-rpm-macros-3-45.el8.noarch 164/172 Verifying : python-rpm-macros-3-45.el8.noarch 165/172 Verifying : gcc-c++-8.5.0-18.el8.x86_64 166/172 Verifying : libstdc++-devel-8.5.0-18.el8.x86_64 167/172 Verifying : python-srpm-macros-3-45.el8.noarch 168/172 Verifying : ansible-srpm-macros-1-8.2.el8.noarch 169/172 Verifying : epel-rpm-macros-8-39.noarch 170/172 Verifying : fpc-srpm-macros-1.3-1.el8.noarch 171/172 Verifying : lua-srpm-macros-1-3.el8.noarch 172/172 Installed products updated. Installed: annobin-10.94-1.el8.x86_64 ansible-srpm-macros-1-8.2.el8.noarch audit-libs-3.0.7-4.el8.x86_64 basesystem-11-5.el8.noarch bash-4.4.20-4.el8_6.x86_64 binutils-2.30-119.el8.x86_64 brotli-1.0.6-3.el8.x86_64 bzip2-1.0.6-26.el8.x86_64 bzip2-libs-1.0.6-26.el8.x86_64 ca-certificates-2022.2.54-80.2.el8_6.noarch chkconfig-1.19.1-1.el8.x86_64 coreutils-8.30-15.el8.x86_64 coreutils-common-8.30-15.el8.x86_64 cpio-2.12-11.el8.x86_64 cpp-8.5.0-18.el8.x86_64 cracklib-2.9.6-15.el8.x86_64 cracklib-dicts-2.9.6-15.el8.x86_64 crypto-policies-20221215-1.gitece0092.el8.noarch curl-7.61.1-30.el8_8.3.x86_64 cyrus-sasl-lib-2.1.27-6.el8_5.x86_64 diffutils-3.6-6.el8.x86_64 dwz-0.12-10.el8.x86_64 efi-srpm-macros-3-3.el8.noarch elfutils-0.188-3.el8.x86_64 elfutils-default-yama-scope-0.188-3.el8.noarch elfutils-libelf-0.188-3.el8.x86_64 elfutils-libs-0.188-3.el8.x86_64 epel-rpm-macros-8-39.noarch expat-2.2.5-11.el8.x86_64 file-5.33-24.el8.x86_64 file-libs-5.33-24.el8.x86_64 filesystem-3.8-6.el8.x86_64 findutils-1:4.6.0-20.el8.x86_64 fpc-srpm-macros-1.3-1.el8.noarch gawk-4.2.1-4.el8.x86_64 gc-7.6.4-3.el8.x86_64 gcc-8.5.0-18.el8.x86_64 gcc-c++-8.5.0-18.el8.x86_64 gcc-plugin-annobin-8.5.0-18.el8.x86_64 gdb-headless-8.2-19.el8.x86_64 gdbm-1:1.18-2.el8.x86_64 gdbm-libs-1:1.18-2.el8.x86_64 ghc-srpm-macros-1.4.2-7.el8.noarch glib2-2.56.4-161.el8.x86_64 glibc-2.28-225.el8.x86_64 glibc-all-langpacks-2.28-225.el8.x86_64 glibc-common-2.28-225.el8.x86_64 glibc-devel-2.28-225.el8.x86_64 glibc-gconv-extra-2.28-225.el8.x86_64 glibc-headers-2.28-225.el8.x86_64 gmp-1:6.1.2-10.el8.x86_64 gnupg2-2.2.20-3.el8_6.x86_64 gnutls-3.6.16-6.el8_7.x86_64 go-srpm-macros-2-17.el8.noarch grep-3.1-6.el8.x86_64 guile-5:2.0.14-7.el8.x86_64 gzip-1.9-13.el8_5.x86_64 ima-evm-utils-1.3.2-12.el8.x86_64 info-6.5-7.el8.x86_64 isl-0.16.1-6.el8.x86_64 kernel-headers-4.18.0-477.21.1.el8_8.x86_64 keyutils-libs-1.5.10-9.el8.x86_64 krb5-libs-1.18.2-25.el8_8.x86_64 libacl-2.2.53-1.el8.x86_64 libarchive-3.3.3-5.el8.x86_64 libassuan-2.5.1-3.el8.x86_64 libatomic_ops-7.6.2-3.el8.x86_64 libattr-2.4.48-3.el8.x86_64 libbabeltrace-1.5.4-4.el8.x86_64 libblkid-2.32.1-42.el8_8.x86_64 libcap-2.48-5.el8_8.x86_64 libcap-ng-0.7.11-1.el8.x86_64 libcom_err-1.45.6-5.el8.x86_64 libcurl-7.61.1-30.el8_8.3.x86_64 libdb-5.3.28-42.el8_4.x86_64 libdb-utils-5.3.28-42.el8_4.x86_64 libfdisk-2.32.1-42.el8_8.x86_64 libffi-3.1-24.el8.x86_64 libgcc-8.5.0-18.el8.x86_64 libgcrypt-1.8.5-7.el8_6.x86_64 libgomp-8.5.0-18.el8.x86_64 libgpg-error-1.31-1.el8.x86_64 libidn2-2.2.0-1.el8.x86_64 libipt-1.6.1-8.el8.x86_64 libksba-1.3.5-9.el8_7.x86_64 libmount-2.32.1-42.el8_8.x86_64 libmpc-1.1.0-9.1.el8.x86_64 libnghttp2-1.33.0-3.el8_2.1.x86_64 libnsl2-1.2.0-2.20180605git4a062cf.el8.x86_64 libpkgconf-1.4.2-1.el8.x86_64 libpsl-0.20.2-6.el8.x86_64 libpwquality-1.4.4-6.el8.x86_64 libselinux-2.9-8.el8.x86_64 libsemanage-2.9-9.el8_6.x86_64 libsepol-2.9-3.el8.x86_64 libsigsegv-2.11-5.el8.x86_64 libsmartcols-2.32.1-42.el8_8.x86_64 libssh-0.9.6-10.el8_8.x86_64 libssh-config-0.9.6-10.el8_8.noarch libstdc++-8.5.0-18.el8.x86_64 libstdc++-devel-8.5.0-18.el8.x86_64 libtasn1-4.13-4.el8_7.x86_64 libtirpc-1.1.4-8.el8.x86_64 libtool-ltdl-2.4.6-25.el8.x86_64 libunistring-0.9.9-3.el8.x86_64 libusbx-1.0.23-4.el8.x86_64 libutempter-1.1.6-14.el8.x86_64 libuuid-2.32.1-42.el8_8.x86_64 libverto-0.3.2-2.el8.x86_64 libxcrypt-4.1.1-6.el8.x86_64 libxcrypt-devel-4.1.1-6.el8.x86_64 libxml2-2.9.7-16.el8_8.1.x86_64 libzstd-1.4.4-1.el8.x86_64 lua-libs-5.3.4-12.el8.x86_64 lua-srpm-macros-1-3.el8.noarch lz4-libs-1.8.3-3.el8_4.x86_64 make-1:4.2.1-11.el8.x86_64 mpfr-3.1.6-1.el8.x86_64 ncurses-6.1-9.20180224.el8.x86_64 ncurses-base-6.1-9.20180224.el8.noarch ncurses-libs-6.1-9.20180224.el8.x86_64 nettle-3.4.1-7.el8.x86_64 npth-1.5-4.el8.x86_64 ocaml-srpm-macros-5-4.el8.noarch openblas-srpm-macros-2-2.el8.noarch openldap-2.4.46-18.el8.x86_64 openssl-libs-1:1.1.1k-9.el8_7.x86_64 p11-kit-0.23.22-1.el8.x86_64 p11-kit-trust-0.23.22-1.el8.x86_64 pam-1.3.1-25.el8.x86_64 patch-2.7.6-11.el8.x86_64 pcre-8.42-6.el8.x86_64 pcre2-10.32-3.el8_6.x86_64 perl-srpm-macros-1-25.el8.noarch pkgconf-1.4.2-1.el8.x86_64 pkgconf-m4-1.4.2-1.el8.noarch pkgconf-pkg-config-1.4.2-1.el8.x86_64 platform-python-3.6.8-51.el8_8.1.x86_64 platform-python-setuptools-39.2.0-7.el8.noarch popt-1.18-1.el8.x86_64 publicsuffix-list-dafsa-20180723-1.el8.noarch python-rpm-macros-3-45.el8.noarch python-srpm-macros-3-45.el8.noarch python3-libs-3.6.8-51.el8_8.1.x86_64 python3-pip-wheel-9.0.3-22.el8.noarch python3-rpm-macros-3-45.el8.noarch python3-setuptools-wheel-39.2.0-7.el8.noarch qt5-srpm-macros-5.15.3-1.el8.noarch readline-7.0-10.el8.x86_64 redhat-release-8.8-0.8.el8.x86_64 redhat-rpm-config-131-1.el8.noarch rpm-4.14.3-26.el8.x86_64 rpm-build-4.14.3-26.el8.x86_64 rpm-build-libs-4.14.3-26.el8.x86_64 rpm-libs-4.14.3-26.el8.x86_64 rust-srpm-macros-5-2.el8.noarch sed-4.5-5.el8.x86_64 setup-2.12.2-9.el8.noarch shadow-utils-2:4.6-17.el8.x86_64 sqlite-libs-3.26.0-18.el8_8.x86_64 systemd-libs-239-74.el8_8.3.x86_64 tar-2:1.30-9.el8.x86_64 tpm2-tss-2.3.2-4.el8.x86_64 tzdata-2023c-1.el8.noarch unzip-6.0-46.el8.x86_64 util-linux-2.32.1-42.el8_8.x86_64 which-2.21-18.el8.x86_64 xz-5.2.4-4.el8_6.x86_64 xz-libs-5.2.4-4.el8_6.x86_64 zip-3.0-23.el8.x86_64 zlib-1.2.11-21.el8_7.x86_64 zstd-1.4.4-1.el8.x86_64 Complete! Finish: installing minimal buildroot with dnf Start: creating root cache Finish: creating root cache Finish: chroot init INFO: Installed packages: INFO: libsepol-2.9-3.el8.x86_64 perl-srpm-macros-1-25.el8.noarch gdbm-1.18-2.el8.x86_64 elfutils-0.188-3.el8.x86_64 ncurses-base-6.1-9.20180224.el8.noarch glibc-common-2.28-225.el8.x86_64 libsmartcols-2.32.1-42.el8_8.x86_64 pkgconf-1.4.2-1.el8.x86_64 python3-rpm-macros-3-45.el8.noarch libnsl2-1.2.0-2.20180605git4a062cf.el8.x86_64 libatomic_ops-7.6.2-3.el8.x86_64 annobin-10.94-1.el8.x86_64 libnghttp2-1.33.0-3.el8_2.1.x86_64 basesystem-11-5.el8.noarch libutempter-1.1.6-14.el8.x86_64 zip-3.0-23.el8.x86_64 expat-2.2.5-11.el8.x86_64 brotli-1.0.6-3.el8.x86_64 efi-srpm-macros-3-3.el8.noarch python3-pip-wheel-9.0.3-22.el8.noarch ansible-srpm-macros-1-8.2.el8.noarch elfutils-libelf-0.188-3.el8.x86_64 p11-kit-0.23.22-1.el8.x86_64 tar-1.30-9.el8.x86_64 libstdc++-8.5.0-18.el8.x86_64 popt-1.18-1.el8.x86_64 chkconfig-1.19.1-1.el8.x86_64 libgcrypt-1.8.5-7.el8_6.x86_64 sqlite-libs-3.26.0-18.el8_8.x86_64 glibc-devel-2.28-225.el8.x86_64 rust-srpm-macros-5-2.el8.noarch glib2-2.56.4-161.el8.x86_64 libarchive-3.3.3-5.el8.x86_64 publicsuffix-list-dafsa-20180723-1.el8.noarch gdb-headless-8.2-19.el8.x86_64 fpc-srpm-macros-1.3-1.el8.noarch libxcrypt-4.1.1-6.el8.x86_64 libcom_err-1.45.6-5.el8.x86_64 rpm-build-libs-4.14.3-26.el8.x86_64 binutils-2.30-119.el8.x86_64 unzip-6.0-46.el8.x86_64 keyutils-libs-1.5.10-9.el8.x86_64 libassuan-2.5.1-3.el8.x86_64 cyrus-sasl-lib-2.1.27-6.el8_5.x86_64 libxml2-2.9.7-16.el8_8.1.x86_64 libipt-1.6.1-8.el8.x86_64 coreutils-common-8.30-15.el8.x86_64 libcap-ng-0.7.11-1.el8.x86_64 ncurses-libs-6.1-9.20180224.el8.x86_64 libtasn1-4.13-4.el8_7.x86_64 readline-7.0-10.el8.x86_64 epel-rpm-macros-8-39.noarch zstd-1.4.4-1.el8.x86_64 libuuid-2.32.1-42.el8_8.x86_64 pam-1.3.1-25.el8.x86_64 platform-python-3.6.8-51.el8_8.1.x86_64 libstdc++-devel-8.5.0-18.el8.x86_64 libdb-5.3.28-42.el8_4.x86_64 findutils-4.6.0-20.el8.x86_64 gmp-6.1.2-10.el8.x86_64 libxcrypt-devel-4.1.1-6.el8.x86_64 libacl-2.2.53-1.el8.x86_64 qt5-srpm-macros-5.15.3-1.el8.noarch redhat-release-8.8-0.8.el8.x86_64 python3-libs-3.6.8-51.el8_8.1.x86_64 gc-7.6.4-3.el8.x86_64 nettle-3.4.1-7.el8.x86_64 libsigsegv-2.11-5.el8.x86_64 python-rpm-macros-3-45.el8.noarch xz-5.2.4-4.el8_6.x86_64 systemd-libs-239-74.el8_8.3.x86_64 libpkgconf-1.4.2-1.el8.x86_64 openblas-srpm-macros-2-2.el8.noarch curl-7.61.1-30.el8_8.3.x86_64 gnupg2-2.2.20-3.el8_6.x86_64 ocaml-srpm-macros-5-4.el8.noarch lua-srpm-macros-1-3.el8.noarch mpfr-3.1.6-1.el8.x86_64 libcap-2.48-5.el8_8.x86_64 libssh-0.9.6-10.el8_8.x86_64 gcc-c++-8.5.0-18.el8.x86_64 kernel-headers-4.18.0-477.21.1.el8_8.x86_64 file-5.33-24.el8.x86_64 rpm-4.14.3-26.el8.x86_64 crypto-policies-20221215-1.gitece0092.el8.noarch dwz-0.12-10.el8.x86_64 python-srpm-macros-3-45.el8.noarch libtirpc-1.1.4-8.el8.x86_64 glibc-2.28-225.el8.x86_64 bzip2-libs-1.0.6-26.el8.x86_64 lz4-libs-1.8.3-3.el8_4.x86_64 util-linux-2.32.1-42.el8_8.x86_64 guile-2.0.14-7.el8.x86_64 glibc-all-langpacks-2.28-225.el8.x86_64 glibc-gconv-extra-2.28-225.el8.x86_64 gpg-pubkey-2f86d6a1-5cf7cefb pkgconf-pkg-config-1.4.2-1.el8.x86_64 ima-evm-utils-1.3.2-12.el8.x86_64 ncurses-6.1-9.20180224.el8.x86_64 krb5-libs-1.18.2-25.el8_8.x86_64 lua-libs-5.3.4-12.el8.x86_64 p11-kit-trust-0.23.22-1.el8.x86_64 libgomp-8.5.0-18.el8.x86_64 file-libs-5.33-24.el8.x86_64 elfutils-libs-0.188-3.el8.x86_64 rpm-build-4.14.3-26.el8.x86_64 libpwquality-1.4.4-6.el8.x86_64 libmount-2.32.1-42.el8_8.x86_64 go-srpm-macros-2-17.el8.noarch libksba-1.3.5-9.el8_7.x86_64 cracklib-2.9.6-15.el8.x86_64 libssh-config-0.9.6-10.el8_8.noarch gnutls-3.6.16-6.el8_7.x86_64 openssl-libs-1.1.1k-9.el8_7.x86_64 bash-4.4.20-4.el8_6.x86_64 redhat-rpm-config-131-1.el8.noarch make-4.2.1-11.el8.x86_64 audit-libs-3.0.7-4.el8.x86_64 libusbx-1.0.23-4.el8.x86_64 rpm-libs-4.14.3-26.el8.x86_64 which-2.21-18.el8.x86_64 patch-2.7.6-11.el8.x86_64 xz-libs-5.2.4-4.el8_6.x86_64 ghc-srpm-macros-1.4.2-7.el8.noarch libattr-2.4.48-3.el8.x86_64 cpio-2.12-11.el8.x86_64 npth-1.5-4.el8.x86_64 libgpg-error-1.31-1.el8.x86_64 libidn2-2.2.0-1.el8.x86_64 libcurl-7.61.1-30.el8_8.3.x86_64 cracklib-dicts-2.9.6-15.el8.x86_64 libunistring-0.9.9-3.el8.x86_64 gpg-pubkey-fd431d51-4ae0493b libfdisk-2.32.1-42.el8_8.x86_64 libpsl-0.20.2-6.el8.x86_64 pkgconf-m4-1.4.2-1.el8.noarch libmpc-1.1.0-9.1.el8.x86_64 elfutils-default-yama-scope-0.188-3.el8.noarch gzip-1.9-13.el8_5.x86_64 tzdata-2023c-1.el8.noarch pcre2-10.32-3.el8_6.x86_64 libtool-ltdl-2.4.6-25.el8.x86_64 glibc-headers-2.28-225.el8.x86_64 libverto-0.3.2-2.el8.x86_64 gcc-plugin-annobin-8.5.0-18.el8.x86_64 libselinux-2.9-8.el8.x86_64 coreutils-8.30-15.el8.x86_64 info-6.5-7.el8.x86_64 tpm2-tss-2.3.2-4.el8.x86_64 setup-2.12.2-9.el8.noarch isl-0.16.1-6.el8.x86_64 ca-certificates-2022.2.54-80.2.el8_6.noarch cpp-8.5.0-18.el8.x86_64 gcc-8.5.0-18.el8.x86_64 diffutils-3.6-6.el8.x86_64 libsemanage-2.9-9.el8_6.x86_64 python3-setuptools-wheel-39.2.0-7.el8.noarch filesystem-3.8-6.el8.x86_64 libzstd-1.4.4-1.el8.x86_64 grep-3.1-6.el8.x86_64 libbabeltrace-1.5.4-4.el8.x86_64 libdb-utils-5.3.28-42.el8_4.x86_64 openldap-2.4.46-18.el8.x86_64 pcre-8.42-6.el8.x86_64 libgcc-8.5.0-18.el8.x86_64 zlib-1.2.11-21.el8_7.x86_64 libffi-3.1-24.el8.x86_64 gdbm-libs-1.18-2.el8.x86_64 libblkid-2.32.1-42.el8_8.x86_64 sed-4.5-5.el8.x86_64 bzip2-1.0.6-26.el8.x86_64 platform-python-setuptools-39.2.0-7.el8.noarch gpg-pubkey-2fa658e0-45700c69 gawk-4.2.1-4.el8.x86_64 shadow-utils-4.6-17.el8.x86_64 Start: buildsrpm Start: rpmbuild -bs sh: /usr/bin/python3.6: No such file or directory sh: /usr/bin/python3.6: No such file or directory sh: /usr/bin/python3.6: No such file or directory Building target platforms: x86_64 Building for target x86_64 Wrote: /builddir/build/SRPMS/libsearpc-3.3-1.el8.src.rpm Finish: rpmbuild -bs INFO: chroot_scan: 3 files copied to /var/lib/copr-rpmbuild/results/chroot_scan INFO: /var/lib/mock/rhel+epel-8-x86_64-1692252681.379848/root/var/log/dnf.rpm.log /var/lib/mock/rhel+epel-8-x86_64-1692252681.379848/root/var/log/dnf.librepo.log /var/lib/mock/rhel+epel-8-x86_64-1692252681.379848/root/var/log/dnf.log Finish: buildsrpm INFO: Done(/var/lib/copr-rpmbuild/workspace/workdir-uaz2osa3/libsearpc/libsearpc.spec) Config(child) 1 minutes 31 seconds INFO: Results and/or logs in: /var/lib/copr-rpmbuild/results INFO: Cleaning up build root ('cleanup_on_success=True') Start: clean chroot INFO: unmounting tmpfs. Finish: clean chroot INFO: Start(/var/lib/copr-rpmbuild/results/libsearpc-3.3-1.el8.src.rpm) Config(rhel+epel-8-x86_64) Start: chroot init INFO: mounting tmpfs at /var/lib/mock/rhel+epel-8-x86_64-1692252681.379848/root. INFO: calling preinit hooks INFO: enabled root cache Start: unpacking root cache Finish: unpacking root cache INFO: enabled package manager cache Start: cleaning package manager metadata Finish: cleaning package manager metadata INFO: enabled HW Info plugin Finish: chroot init Start: build phase for libsearpc-3.3-1.el8.src.rpm Start: build setup for libsearpc-3.3-1.el8.src.rpm sh: /usr/bin/python3.6: No such file or directory sh: /usr/bin/python3.6: No such file or directory sh: /usr/bin/python3.6: No such file or directory Building target platforms: x86_64 Building for target x86_64 Wrote: /builddir/build/SRPMS/libsearpc-3.3-1.el8.src.rpm No matches found for the following disable plugin patterns: local, spacewalk, versionlock Updating Subscription Management repositories. Unable to read consumer identity This system is not registered with an entitlement server. You can use subscription-manager to register. Copr repository 46 kB/s | 2.1 kB 00:00 Red Hat Enterprise Linux - BaseOS 14 kB/s | 4.1 kB 00:00 Red Hat Enterprise Linux - AppStream 30 kB/s | 4.5 kB 00:00 Red Hat Enterprise Linux - CodeReady Linux Buil 20 kB/s | 4.5 kB 00:00 Extra Packages for Enterprise Linux 8 - x86_64 293 kB/s | 16 kB 00:00 Extra Packages for Enterprise Linux 8 - x86_64 4.0 MB/s | 16 MB 00:03 Package make-1:4.2.1-11.el8.x86_64 is already installed. Dependencies resolved. ============================================================================================== Package Arch Version Repository Size ============================================================================================== Installing: autoconf noarch 2.69-29.el8 rhel-appstream 711 k automake noarch 1.16.1-7.el8 rhel-appstream 713 k glib2-devel x86_64 2.56.4-161.el8 rhel-baseos 426 k jansson-devel x86_64 2.14-1.el8 rhel-appstream 16 k libtool x86_64 2.4.6-25.el8 rhel-appstream 709 k python36-devel x86_64 3.6.8-38.module+el8.5.0+12207+5c5719bc rhel-appstream 17 k Installing dependencies: emacs-filesystem noarch 1:26.1-10.el8_8.2 rhel-baseos 70 k groff-base x86_64 1.22.3-18.el8 rhel-baseos 1.0 M jansson x86_64 2.14-1.el8 rhel-baseos 47 k m4 x86_64 1.4.18-7.el8 rhel-baseos 223 k pcre-cpp x86_64 8.42-6.el8 rhel-baseos 47 k pcre-devel x86_64 8.42-6.el8 rhel-baseos 551 k pcre-utf16 x86_64 8.42-6.el8 rhel-baseos 195 k pcre-utf32 x86_64 8.42-6.el8 rhel-baseos 186 k perl-Carp noarch 1.42-396.el8 rhel-baseos 30 k perl-Data-Dumper x86_64 2.167-399.el8 rhel-baseos 58 k perl-Encode x86_64 4:2.97-3.el8 rhel-baseos 1.5 M perl-Errno x86_64 1.28-422.el8 rhel-baseos 77 k perl-Exporter noarch 5.72-396.el8 rhel-baseos 34 k perl-File-Path noarch 2.15-2.el8 rhel-baseos 38 k perl-File-Temp noarch 0.230.600-1.el8 rhel-baseos 63 k perl-Getopt-Long noarch 1:2.50-4.el8 rhel-baseos 63 k perl-HTTP-Tiny noarch 0.074-1.el8 rhel-baseos 58 k perl-IO x86_64 1.38-422.el8 rhel-baseos 142 k perl-MIME-Base64 x86_64 3.15-396.el8 rhel-baseos 31 k perl-PathTools x86_64 3.74-1.el8 rhel-baseos 90 k perl-Pod-Escapes noarch 1:1.07-395.el8 rhel-baseos 20 k perl-Pod-Perldoc noarch 3.28-396.el8 rhel-baseos 88 k perl-Pod-Simple noarch 1:3.35-395.el8 rhel-baseos 213 k perl-Pod-Usage noarch 4:1.69-395.el8 rhel-baseos 34 k perl-Scalar-List-Utils x86_64 3:1.49-2.el8 rhel-baseos 68 k perl-Socket x86_64 4:2.027-3.el8 rhel-baseos 59 k perl-Storable x86_64 1:3.11-3.el8 rhel-baseos 98 k perl-Term-ANSIColor noarch 4.06-396.el8 rhel-baseos 46 k perl-Term-Cap noarch 1.17-395.el8 rhel-baseos 23 k perl-Text-ParseWords noarch 3.30-395.el8 rhel-baseos 18 k perl-Text-Tabs+Wrap noarch 2013.0523-395.el8 rhel-baseos 24 k perl-Thread-Queue noarch 3.13-1.el8 rhel-appstream 24 k perl-Time-Local noarch 1:1.280-1.el8 rhel-baseos 34 k perl-Unicode-Normalize x86_64 1.25-396.el8 rhel-baseos 82 k perl-constant noarch 1.33-396.el8 rhel-baseos 25 k perl-interpreter x86_64 4:5.26.3-422.el8 rhel-baseos 6.3 M perl-libs x86_64 4:5.26.3-422.el8 rhel-baseos 1.6 M perl-macros x86_64 4:5.26.3-422.el8 rhel-baseos 73 k perl-parent noarch 1:0.237-1.el8 rhel-baseos 20 k perl-podlators noarch 4.11-1.el8 rhel-baseos 118 k perl-threads x86_64 1:2.21-2.el8 rhel-baseos 61 k perl-threads-shared x86_64 1.58-2.el8 rhel-baseos 48 k platform-python-devel x86_64 3.6.8-51.el8_8.1 rhel-appstream 240 k platform-python-pip noarch 9.0.3-22.el8 rhel-baseos 1.6 M python3-pip noarch 9.0.3-22.el8 rhel-appstream 20 k python3-rpm-generators noarch 5-8.el8 rhel-appstream 25 k python3-setuptools noarch 39.2.0-7.el8 rhel-baseos 163 k python36 x86_64 3.6.8-38.module+el8.5.0+12207+5c5719bc rhel-appstream 19 k python36-rpm-macros noarch 3.6.8-38.module+el8.5.0+12207+5c5719bc rhel-appstream 16 k Enabling module streams: python36 3.6 Transaction Summary ============================================================================================== Install 55 Packages Total download size: 18 M Installed size: 57 M Downloading Packages: (1/55): perl-Data-Dumper-2.167-399.el8.x86_64.r 313 kB/s | 58 kB 00:00 (2/55): perl-Scalar-List-Utils-1.49-2.el8.x86_6 331 kB/s | 68 kB 00:00 (3/55): perl-PathTools-3.74-1.el8.x86_64.rpm 371 kB/s | 90 kB 00:00 (4/55): perl-threads-shared-1.58-2.el8.x86_64.r 405 kB/s | 48 kB 00:00 (5/55): perl-Unicode-Normalize-1.25-396.el8.x86 632 kB/s | 82 kB 00:00 (6/55): perl-Encode-2.97-3.el8.x86_64.rpm 6.1 MB/s | 1.5 MB 00:00 (7/55): groff-base-1.22.3-18.el8.x86_64.rpm 3.9 MB/s | 1.0 MB 00:00 (8/55): perl-MIME-Base64-3.15-396.el8.x86_64.rp 363 kB/s | 31 kB 00:00 (9/55): perl-threads-2.21-2.el8.x86_64.rpm 720 kB/s | 61 kB 00:00 (10/55): perl-Pod-Simple-3.35-395.el8.noarch.rp 2.5 MB/s | 213 kB 00:00 (11/55): m4-1.4.18-7.el8.x86_64.rpm 2.9 MB/s | 223 kB 00:00 (12/55): perl-Term-ANSIColor-4.06-396.el8.noarc 306 kB/s | 46 kB 00:00 (13/55): perl-HTTP-Tiny-0.074-1.el8.noarch.rpm 569 kB/s | 58 kB 00:00 (14/55): perl-File-Path-2.15-2.el8.noarch.rpm 498 kB/s | 38 kB 00:00 (15/55): perl-Pod-Perldoc-3.28-396.el8.noarch.r 901 kB/s | 88 kB 00:00 (16/55): perl-Pod-Escapes-1.07-395.el8.noarch.r 83 kB/s | 20 kB 00:00 (17/55): perl-Text-Tabs+Wrap-2013.0523-395.el8. 272 kB/s | 24 kB 00:00 (18/55): perl-parent-0.237-1.el8.noarch.rpm 194 kB/s | 20 kB 00:00 (19/55): perl-Getopt-Long-2.50-4.el8.noarch.rpm 581 kB/s | 63 kB 00:00 (20/55): perl-Time-Local-1.280-1.el8.noarch.rpm 228 kB/s | 34 kB 00:00 (21/55): perl-Carp-1.42-396.el8.noarch.rpm 251 kB/s | 30 kB 00:00 (22/55): perl-Exporter-5.72-396.el8.noarch.rpm 232 kB/s | 34 kB 00:00 (23/55): perl-podlators-4.11-1.el8.noarch.rpm 328 kB/s | 118 kB 00:00 (24/55): perl-Text-ParseWords-3.30-395.el8.noar 210 kB/s | 18 kB 00:00 (25/55): perl-Storable-3.11-3.el8.x86_64.rpm 547 kB/s | 98 kB 00:00 (26/55): perl-Term-Cap-1.17-395.el8.noarch.rpm 302 kB/s | 23 kB 00:00 (27/55): perl-constant-1.33-396.el8.noarch.rpm 218 kB/s | 25 kB 00:00 (28/55): perl-File-Temp-0.230.600-1.el8.noarch. 306 kB/s | 63 kB 00:00 (29/55): perl-Pod-Usage-1.69-395.el8.noarch.rpm 295 kB/s | 34 kB 00:00 (30/55): perl-Socket-2.027-3.el8.x86_64.rpm 586 kB/s | 59 kB 00:00 (31/55): pcre-cpp-8.42-6.el8.x86_64.rpm 607 kB/s | 47 kB 00:00 (32/55): pcre-devel-8.42-6.el8.x86_64.rpm 3.5 MB/s | 551 kB 00:00 (33/55): pcre-utf32-8.42-6.el8.x86_64.rpm 1.5 MB/s | 186 kB 00:00 (34/55): jansson-2.14-1.el8.x86_64.rpm 379 kB/s | 47 kB 00:00 (35/55): pcre-utf16-8.42-6.el8.x86_64.rpm 1.2 MB/s | 195 kB 00:00 (36/55): platform-python-pip-9.0.3-22.el8.noarc 11 MB/s | 1.6 MB 00:00 (37/55): perl-IO-1.38-422.el8.x86_64.rpm 1.4 MB/s | 142 kB 00:00 (38/55): glib2-devel-2.56.4-161.el8.x86_64.rpm 3.7 MB/s | 426 kB 00:00 (39/55): python3-setuptools-39.2.0-7.el8.noarch 1.0 MB/s | 163 kB 00:00 (40/55): perl-macros-5.26.3-422.el8.x86_64.rpm 776 kB/s | 73 kB 00:00 (41/55): perl-libs-5.26.3-422.el8.x86_64.rpm 10 MB/s | 1.6 MB 00:00 (42/55): perl-Errno-1.28-422.el8.x86_64.rpm 851 kB/s | 77 kB 00:00 (43/55): perl-interpreter-5.26.3-422.el8.x86_64 20 MB/s | 6.3 MB 00:00 (44/55): perl-Thread-Queue-3.13-1.el8.noarch.rp 269 kB/s | 24 kB 00:00 (45/55): emacs-filesystem-26.1-10.el8_8.2.noarc 399 kB/s | 70 kB 00:00 (46/55): python36-3.6.8-38.module+el8.5.0+12207 193 kB/s | 19 kB 00:00 (47/55): automake-1.16.1-7.el8.noarch.rpm 5.1 MB/s | 713 kB 00:00 (48/55): libtool-2.4.6-25.el8.x86_64.rpm 3.2 MB/s | 709 kB 00:00 (49/55): python36-rpm-macros-3.6.8-38.module+el 188 kB/s | 16 kB 00:00 (50/55): python36-devel-3.6.8-38.module+el8.5.0 126 kB/s | 17 kB 00:00 (51/55): autoconf-2.69-29.el8.noarch.rpm 7.0 MB/s | 711 kB 00:00 (52/55): jansson-devel-2.14-1.el8.x86_64.rpm 190 kB/s | 16 kB 00:00 (53/55): python3-pip-9.0.3-22.el8.noarch.rpm 197 kB/s | 20 kB 00:00 (54/55): platform-python-devel-3.6.8-51.el8_8.1 2.8 MB/s | 240 kB 00:00 (55/55): python3-rpm-generators-5-8.el8.noarch. 165 kB/s | 25 kB 00:00 -------------------------------------------------------------------------------- Total 7.0 MB/s | 18 MB 00:02 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : 1/1 Installing : python3-rpm-generators-5-8.el8.noarch 1/55 Installing : platform-python-devel-3.6.8-51.el8_8.1.x86_64 2/55 Installing : emacs-filesystem-1:26.1-10.el8_8.2.noarch 3/55 Installing : python3-setuptools-39.2.0-7.el8.noarch 4/55 Installing : jansson-2.14-1.el8.x86_64 5/55 Installing : platform-python-pip-9.0.3-22.el8.noarch 6/55 Installing : python36-3.6.8-38.module+el8.5.0+12207+5c5719bc.x8 7/55 Running scriptlet: python36-3.6.8-38.module+el8.5.0+12207+5c5719bc.x8 7/55 Installing : python3-pip-9.0.3-22.el8.noarch 8/55 Installing : pcre-utf16-8.42-6.el8.x86_64 9/55 Installing : pcre-cpp-8.42-6.el8.x86_64 10/55 Installing : pcre-utf32-8.42-6.el8.x86_64 11/55 Installing : pcre-devel-8.42-6.el8.x86_64 12/55 Installing : m4-1.4.18-7.el8.x86_64 13/55 Running scriptlet: m4-1.4.18-7.el8.x86_64 13/55 Installing : groff-base-1.22.3-18.el8.x86_64 14/55 Installing : perl-Pod-Escapes-1:1.07-395.el8.noarch 15/55 Installing : perl-Time-Local-1:1.280-1.el8.noarch 16/55 Installing : perl-Term-ANSIColor-4.06-396.el8.noarch 17/55 Installing : perl-Term-Cap-1.17-395.el8.noarch 18/55 Installing : perl-HTTP-Tiny-0.074-1.el8.noarch 19/55 Installing : perl-Pod-Simple-1:3.35-395.el8.noarch 20/55 Installing : perl-File-Temp-0.230.600-1.el8.noarch 21/55 Installing : perl-podlators-4.11-1.el8.noarch 22/55 Installing : perl-Pod-Perldoc-3.28-396.el8.noarch 23/55 Installing : perl-Text-ParseWords-3.30-395.el8.noarch 24/55 Installing : perl-Pod-Usage-4:1.69-395.el8.noarch 25/55 Installing : perl-MIME-Base64-3.15-396.el8.x86_64 26/55 Installing : perl-Storable-1:3.11-3.el8.x86_64 27/55 Installing : perl-Getopt-Long-1:2.50-4.el8.noarch 28/55 Installing : perl-Socket-4:2.027-3.el8.x86_64 29/55 Installing : perl-Encode-4:2.97-3.el8.x86_64 30/55 Installing : perl-Errno-1.28-422.el8.x86_64 31/55 Installing : perl-parent-1:0.237-1.el8.noarch 32/55 Installing : perl-Text-Tabs+Wrap-2013.0523-395.el8.noarch 33/55 Installing : perl-Unicode-Normalize-1.25-396.el8.x86_64 34/55 Installing : perl-threads-shared-1.58-2.el8.x86_64 35/55 Installing : perl-threads-1:2.21-2.el8.x86_64 36/55 Installing : perl-Carp-1.42-396.el8.noarch 37/55 Installing : perl-Exporter-5.72-396.el8.noarch 38/55 Installing : perl-libs-4:5.26.3-422.el8.x86_64 39/55 Installing : perl-Scalar-List-Utils-3:1.49-2.el8.x86_64 40/55 Installing : perl-macros-4:5.26.3-422.el8.x86_64 41/55 Installing : perl-File-Path-2.15-2.el8.noarch 42/55 Installing : perl-PathTools-3.74-1.el8.x86_64 43/55 Installing : perl-constant-1.33-396.el8.noarch 44/55 Installing : perl-IO-1.38-422.el8.x86_64 45/55 Installing : perl-interpreter-4:5.26.3-422.el8.x86_64 46/55 Installing : perl-Data-Dumper-2.167-399.el8.x86_64 47/55 Installing : autoconf-2.69-29.el8.noarch 48/55 Running scriptlet: autoconf-2.69-29.el8.noarch 48/55 Installing : perl-Thread-Queue-3.13-1.el8.noarch 49/55 Installing : automake-1.16.1-7.el8.noarch 50/55 Installing : libtool-2.4.6-25.el8.x86_64 51/55 Running scriptlet: libtool-2.4.6-25.el8.x86_64 51/55 Installing : glib2-devel-2.56.4-161.el8.x86_64 52/55 Installing : python36-devel-3.6.8-38.module+el8.5.0+12207+5c571 53/55 Running scriptlet: python36-devel-3.6.8-38.module+el8.5.0+12207+5c571 53/55 Installing : jansson-devel-2.14-1.el8.x86_64 54/55 Installing : python36-rpm-macros-3.6.8-38.module+el8.5.0+12207+ 55/55 Running scriptlet: python36-rpm-macros-3.6.8-38.module+el8.5.0+12207+ 55/55 Verifying : perl-Scalar-List-Utils-3:1.49-2.el8.x86_64 1/55 Verifying : perl-PathTools-3.74-1.el8.x86_64 2/55 Verifying : perl-Data-Dumper-2.167-399.el8.x86_64 3/55 Verifying : perl-threads-shared-1.58-2.el8.x86_64 4/55 Verifying : perl-Encode-4:2.97-3.el8.x86_64 5/55 Verifying : groff-base-1.22.3-18.el8.x86_64 6/55 Verifying : perl-Unicode-Normalize-1.25-396.el8.x86_64 7/55 Verifying : perl-MIME-Base64-3.15-396.el8.x86_64 8/55 Verifying : perl-threads-1:2.21-2.el8.x86_64 9/55 Verifying : perl-Pod-Simple-1:3.35-395.el8.noarch 10/55 Verifying : perl-Term-ANSIColor-4.06-396.el8.noarch 11/55 Verifying : m4-1.4.18-7.el8.x86_64 12/55 Verifying : perl-HTTP-Tiny-0.074-1.el8.noarch 13/55 Verifying : perl-Pod-Escapes-1:1.07-395.el8.noarch 14/55 Verifying : perl-Pod-Perldoc-3.28-396.el8.noarch 15/55 Verifying : perl-File-Path-2.15-2.el8.noarch 16/55 Verifying : perl-parent-1:0.237-1.el8.noarch 17/55 Verifying : perl-Text-Tabs+Wrap-2013.0523-395.el8.noarch 18/55 Verifying : perl-Getopt-Long-1:2.50-4.el8.noarch 19/55 Verifying : perl-podlators-4.11-1.el8.noarch 20/55 Verifying : perl-Time-Local-1:1.280-1.el8.noarch 21/55 Verifying : perl-Carp-1.42-396.el8.noarch 22/55 Verifying : perl-Exporter-5.72-396.el8.noarch 23/55 Verifying : perl-Storable-1:3.11-3.el8.x86_64 24/55 Verifying : perl-Text-ParseWords-3.30-395.el8.noarch 25/55 Verifying : perl-File-Temp-0.230.600-1.el8.noarch 26/55 Verifying : perl-constant-1.33-396.el8.noarch 27/55 Verifying : perl-Term-Cap-1.17-395.el8.noarch 28/55 Verifying : perl-Pod-Usage-4:1.69-395.el8.noarch 29/55 Verifying : perl-Socket-4:2.027-3.el8.x86_64 30/55 Verifying : pcre-devel-8.42-6.el8.x86_64 31/55 Verifying : pcre-utf32-8.42-6.el8.x86_64 32/55 Verifying : pcre-cpp-8.42-6.el8.x86_64 33/55 Verifying : pcre-utf16-8.42-6.el8.x86_64 34/55 Verifying : platform-python-pip-9.0.3-22.el8.noarch 35/55 Verifying : jansson-2.14-1.el8.x86_64 36/55 Verifying : python3-setuptools-39.2.0-7.el8.noarch 37/55 Verifying : perl-IO-1.38-422.el8.x86_64 38/55 Verifying : glib2-devel-2.56.4-161.el8.x86_64 39/55 Verifying : perl-interpreter-4:5.26.3-422.el8.x86_64 40/55 Verifying : perl-libs-4:5.26.3-422.el8.x86_64 41/55 Verifying : perl-macros-4:5.26.3-422.el8.x86_64 42/55 Verifying : perl-Errno-1.28-422.el8.x86_64 43/55 Verifying : emacs-filesystem-1:26.1-10.el8_8.2.noarch 44/55 Verifying : perl-Thread-Queue-3.13-1.el8.noarch 45/55 Verifying : libtool-2.4.6-25.el8.x86_64 46/55 Verifying : automake-1.16.1-7.el8.noarch 47/55 Verifying : python36-3.6.8-38.module+el8.5.0+12207+5c5719bc.x8 48/55 Verifying : python36-devel-3.6.8-38.module+el8.5.0+12207+5c571 49/55 Verifying : python36-rpm-macros-3.6.8-38.module+el8.5.0+12207+ 50/55 Verifying : autoconf-2.69-29.el8.noarch 51/55 Verifying : jansson-devel-2.14-1.el8.x86_64 52/55 Verifying : python3-pip-9.0.3-22.el8.noarch 53/55 Verifying : python3-rpm-generators-5-8.el8.noarch 54/55 Verifying : platform-python-devel-3.6.8-51.el8_8.1.x86_64 55/55 Installed products updated. Installed: autoconf-2.69-29.el8.noarch automake-1.16.1-7.el8.noarch emacs-filesystem-1:26.1-10.el8_8.2.noarch glib2-devel-2.56.4-161.el8.x86_64 groff-base-1.22.3-18.el8.x86_64 jansson-2.14-1.el8.x86_64 jansson-devel-2.14-1.el8.x86_64 libtool-2.4.6-25.el8.x86_64 m4-1.4.18-7.el8.x86_64 pcre-cpp-8.42-6.el8.x86_64 pcre-devel-8.42-6.el8.x86_64 pcre-utf16-8.42-6.el8.x86_64 pcre-utf32-8.42-6.el8.x86_64 perl-Carp-1.42-396.el8.noarch perl-Data-Dumper-2.167-399.el8.x86_64 perl-Encode-4:2.97-3.el8.x86_64 perl-Errno-1.28-422.el8.x86_64 perl-Exporter-5.72-396.el8.noarch perl-File-Path-2.15-2.el8.noarch perl-File-Temp-0.230.600-1.el8.noarch perl-Getopt-Long-1:2.50-4.el8.noarch perl-HTTP-Tiny-0.074-1.el8.noarch perl-IO-1.38-422.el8.x86_64 perl-MIME-Base64-3.15-396.el8.x86_64 perl-PathTools-3.74-1.el8.x86_64 perl-Pod-Escapes-1:1.07-395.el8.noarch perl-Pod-Perldoc-3.28-396.el8.noarch perl-Pod-Simple-1:3.35-395.el8.noarch perl-Pod-Usage-4:1.69-395.el8.noarch perl-Scalar-List-Utils-3:1.49-2.el8.x86_64 perl-Socket-4:2.027-3.el8.x86_64 perl-Storable-1:3.11-3.el8.x86_64 perl-Term-ANSIColor-4.06-396.el8.noarch perl-Term-Cap-1.17-395.el8.noarch perl-Text-ParseWords-3.30-395.el8.noarch perl-Text-Tabs+Wrap-2013.0523-395.el8.noarch perl-Thread-Queue-3.13-1.el8.noarch perl-Time-Local-1:1.280-1.el8.noarch perl-Unicode-Normalize-1.25-396.el8.x86_64 perl-constant-1.33-396.el8.noarch perl-interpreter-4:5.26.3-422.el8.x86_64 perl-libs-4:5.26.3-422.el8.x86_64 perl-macros-4:5.26.3-422.el8.x86_64 perl-parent-1:0.237-1.el8.noarch perl-podlators-4.11-1.el8.noarch perl-threads-1:2.21-2.el8.x86_64 perl-threads-shared-1.58-2.el8.x86_64 platform-python-devel-3.6.8-51.el8_8.1.x86_64 platform-python-pip-9.0.3-22.el8.noarch python3-pip-9.0.3-22.el8.noarch python3-rpm-generators-5-8.el8.noarch python3-setuptools-39.2.0-7.el8.noarch python36-3.6.8-38.module+el8.5.0+12207+5c5719bc.x86_64 python36-devel-3.6.8-38.module+el8.5.0+12207+5c5719bc.x86_64 python36-rpm-macros-3.6.8-38.module+el8.5.0+12207+5c5719bc.noarch Complete! Finish: build setup for libsearpc-3.3-1.el8.src.rpm Start: rpmbuild libsearpc-3.3-1.el8.src.rpm Building target platforms: x86_64 Building for target x86_64 Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.MDuOqe + umask 022 + cd /builddir/build/BUILD + cd /builddir/build/BUILD + rm -rf libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1 + /usr/bin/gzip -dc /builddir/build/SOURCES/libsearpc-3.3-20230527git783141f.tar.gz + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + sed -i -e '/(DESTDIR)/d' libsearpc.pc.in + '[' -f /usr/bin/pathfix3.6.py ']' + pathfix=/usr/bin/pathfix.py + '[' -z s ']' + shebang_flags=-kas + /usr/bin/pathfix.py -pni /usr/bin/python3.6 -kas ./lib/searpc-codegen.py ./pysearpc/test_pysearpc.py ./tests/generate.py ./pysearpc/pygencode.py ./lib/searpc-codegen.py: updating ./pysearpc/test_pysearpc.py: updating ./tests/generate.py: updating ./pysearpc/pygencode.py: updating + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.xzRUQH + umask 022 + cd /builddir/build/BUILD + cd libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1 + ./autogen.sh processing . Creating ./aclocal.m4 ... Running glib-gettextize... Ignore non-fatal messages. Creating po/ subdirectory Copying file po/Makefile.in.in Please add the files codeset.m4 gettext.m4 glibc21.m4 iconv.m4 isc-posix.m4 lcmessage.m4 progtest.m4 from the /usr/share/aclocal directory to your autoconf macro directory or directly to your aclocal.m4 file. You will also need config.guess and config.sub, which you can get from ftp://ftp.gnu.org/pub/gnu/config/. Making ./aclocal.m4 writable ... Running libtoolize... libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' Running aclocal -I m4 ... Running autoheader... Running automake --gnu ... configure.ac:15: installing './compile' configure.ac:13: installing './config.guess' configure.ac:13: installing './config.sub' configure.ac:11: installing './install-sh' configure.ac:11: installing './missing' demo/Makefile.am: installing './depcomp' pysearpc/Makefile.am:4: installing './py-compile' parallel-tests: installing './test-driver' Running autoconf ... + CFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib64/gfortran/modules' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib64/gfortran/modules' + export FCFLAGS + LDFLAGS='-Wl,-z,relro -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + '[' 1 = 1 ']' +++ dirname ./configure ++ find . -name config.guess -o -name config.sub + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./config.sub + '[' -f /usr/lib/rpm/redhat/config.sub ']' + /usr/bin/rm -f ./config.sub ++ basename ./config.sub + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.sub ./config.sub '/usr/lib/rpm/redhat/config.sub' -> './config.sub' + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./config.guess + '[' -f /usr/lib/rpm/redhat/config.guess ']' + /usr/bin/rm -f ./config.guess ++ basename ./config.guess + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.guess ./config.guess '/usr/lib/rpm/redhat/config.guess' -> './config.guess' + '[' 1 = 1 ']' + '[' x '!=' 'x-Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' ']' ++ find . -name ltmain.sh + for i in $(find . -name ltmain.sh) + /usr/bin/sed -i.backup -e 's~compiler_flags=$~compiler_flags="-Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld"~' ./ltmain.sh + ./configure --build=x86_64-redhat-linux-gnu --host=x86_64-redhat-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --disable-compile-demo --with-python3 checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking build system type... x86_64-redhat-linux-gnu checking for x86_64-redhat-linux-gnu-gcc... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... none checking host system type... x86_64-redhat-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-redhat-linux-gnu file names to x86_64-redhat-linux-gnu format... func_convert_file_noop checking how to convert x86_64-redhat-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for x86_64-redhat-linux-gnu-objdump... no checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for x86_64-redhat-linux-gnu-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for x86_64-redhat-linux-gnu-ar... no checking for ar... ar checking for archiver @FILE support... @ checking for x86_64-redhat-linux-gnu-strip... no checking for strip... strip checking for x86_64-redhat-linux-gnu-ranlib... no checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for x86_64-redhat-linux-gnu-mt... no checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for WIN32... checking for Mac... checking for FreeBSD... checking for x86_64-redhat-linux-gnu-pkg-config... /usr/bin/x86_64-redhat-linux-gnu-pkg-config checking pkg-config is at least version 0.9.0... yes checking for GLIB... yes checking for JANSSON... yes checking for a Python interpreter with version >= 3.5... python3 checking for python3... /usr/bin/python3 checking for python3 version... 3.6 checking for python3 platform... linux checking for python3 script directory... ${prefix}/lib/python3.6/site-packages checking for python3 extension module directory... ${exec_prefix}/lib64/python3.6/site-packages checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating lib/Makefile config.status: creating demo/Makefile config.status: creating pysearpc/Makefile config.status: creating libsearpc.pc config.status: creating tests/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands + /usr/bin/make -O -j2 /usr/bin/make all-recursive Making all in lib make[2]: Entering directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/lib' /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I../lib -I../lib -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -c -o searpc-server.lo searpc-server.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I../lib -I../lib -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -c searpc-server.c -fPIC -DPIC -o .libs/searpc-server.o make[2]: Leaving directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/lib' make[2]: Entering directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/lib' /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I../lib -I../lib -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -c -o searpc-client.lo searpc-client.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I../lib -I../lib -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -c searpc-client.c -fPIC -DPIC -o .libs/searpc-client.o searpc-client.c: In function 'searpc_client_async_call_v': searpc-client.c:411:16: warning: unused variable 'ret_len' [-Wunused-variable] gsize len, ret_len; ^~~~~~~ make[2]: Leaving directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/lib' make[2]: Entering directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/lib' /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I../lib -I../lib -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -c -o searpc-utils.lo searpc-utils.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I../lib -I../lib -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -c searpc-utils.c -fPIC -DPIC -o .libs/searpc-utils.o searpc-utils.c: In function 'json_gobject_deserialize': searpc-utils.c:230:5: warning: 'g_object_newv' is deprecated: Use 'g_object_new_with_properties' instead [-Wdeprecated-declarations] ret = g_object_newv (gtype, construct_params->len, (GParameter *) construct_params->data); ^~~ In file included from /usr/include/glib-2.0/gobject/gbinding.h:29, from /usr/include/glib-2.0/glib-object.h:23, from searpc-utils.c:3: /usr/include/glib-2.0/gobject/gobject.h:428:13: note: declared here gpointer g_object_newv (GType object_type, ^~~~~~~~~~~~~ searpc-utils.c:194:17: warning: unused variable 'member_name' [-Wunused-variable] const char *member_name; ^~~~~~~~~~~ make[2]: Leaving directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/lib' make[2]: Entering directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/lib' /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I../lib -I../lib -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -c -o searpc-named-pipe-transport.lo searpc-named-pipe-transport.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I../lib -I../lib -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -c searpc-named-pipe-transport.c -fPIC -DPIC -o .libs/searpc-named-pipe-transport.o make[2]: Leaving directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/lib' make[2]: Entering directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/lib' /bin/sh ../libtool --tag=CC --mode=link gcc -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I../lib -I../lib -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -version-info 1:2:0 -no-undefined -Wl,-z,relro -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -o libsearpc.la -rpath /usr/lib64 searpc-client.lo searpc-server.lo searpc-utils.lo searpc-named-pipe-transport.lo -lgobject-2.0 -lglib-2.0 -ljansson -lpthread libtool: link: gcc -shared -fPIC -DPIC .libs/searpc-client.o .libs/searpc-server.o .libs/searpc-utils.o .libs/searpc-named-pipe-transport.o -lgobject-2.0 -lglib-2.0 -ljansson -lpthread -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -O2 -g -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -Wl,-z -Wl,relro -Wl,-z -Wl,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -Wl,-soname -Wl,libsearpc.so.1 -o .libs/libsearpc.so.1.0.2 libtool: link: (cd ".libs" && rm -f "libsearpc.so.1" && ln -s "libsearpc.so.1.0.2" "libsearpc.so.1") libtool: link: (cd ".libs" && rm -f "libsearpc.so" && ln -s "libsearpc.so.1.0.2" "libsearpc.so") libtool: link: ( cd ".libs" && rm -f "libsearpc.la" && ln -s "../libsearpc.la" "libsearpc.la" ) make[2]: Leaving directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/lib' Making all in pysearpc make[2]: Nothing to be done for 'all'. Making all in tests make[2]: Entering directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/tests' [libsearpc]: generating rpc header files /usr/bin/python3 ../lib/searpc-codegen.py ../tests/rpc_table.py loaded func_table from /builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/tests/rpc_table.py [libsearpc]: done make[2]: Leaving directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/tests' make[2]: Entering directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/tests' /usr/bin/python3 ../tests/generate.py Written `clar.suite` (11 tests in 1 suites) make[2]: Leaving directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/tests' /usr/bin/make all-am make[3]: Nothing to be done for 'all-am'. + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.VACf7o + umask 022 + cd /builddir/build/BUILD + '[' /builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64 '!=' / ']' + rm -rf /builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64 ++ dirname /builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64 + mkdir -p /builddir/build/BUILDROOT + mkdir /builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64 + cd libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1 + /usr/bin/make install DESTDIR=/builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64 'INSTALL=/usr/bin/install -p' Making install in lib make[1]: Entering directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/lib' make[2]: Entering directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/lib' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64/usr/bin' /usr/bin/install -p searpc-codegen.py '/builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64/usr/bin' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64/usr/lib64' /bin/sh ../libtool --mode=install /usr/bin/install -p libsearpc.la '/builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64/usr/lib64' libtool: install: /usr/bin/install -p .libs/libsearpc.so.1.0.2 /builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64/usr/lib64/libsearpc.so.1.0.2 libtool: install: (cd /builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64/usr/lib64 && { ln -s -f libsearpc.so.1.0.2 libsearpc.so.1 || { rm -f libsearpc.so.1 && ln -s libsearpc.so.1.0.2 libsearpc.so.1; }; }) libtool: install: (cd /builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64/usr/lib64 && { ln -s -f libsearpc.so.1.0.2 libsearpc.so || { rm -f libsearpc.so && ln -s libsearpc.so.1.0.2 libsearpc.so; }; }) libtool: install: /usr/bin/install -p .libs/libsearpc.lai /builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64/usr/lib64/libsearpc.la libtool: warning: remember to run 'libtool --finish /usr/lib64' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64/usr/include' /usr/bin/install -p -m 644 searpc-client.h searpc-server.h searpc-utils.h searpc.h searpc-named-pipe-transport.h '/builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64/usr/include' make[2]: Leaving directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/lib' make[1]: Leaving directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/lib' Making install in pysearpc make[1]: Entering directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/pysearpc' make[2]: Entering directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/pysearpc' make[2]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64/usr/lib64/python3.6/site-packages/pysearpc' /usr/bin/install -p -m 644 __init__.py client.py common.py errors.py named_pipe.py server.py transport.py utils.py '/builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64/usr/lib64/python3.6/site-packages/pysearpc' Byte-compiling python modules... __init__.pyclient.pycommon.pyerrors.pynamed_pipe.pyserver.pytransport.pyutils.py Byte-compiling python modules (optimized versions) ... __init__.pyclient.pycommon.pyerrors.pynamed_pipe.pyserver.pytransport.pyutils.py make[2]: Leaving directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/pysearpc' make[1]: Leaving directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/pysearpc' Making install in tests make[1]: Entering directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/tests' /usr/bin/make install-am make[2]: Entering directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/tests' make[3]: Entering directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/tests' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/tests' make[2]: Leaving directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/tests' make[1]: Leaving directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/tests' make[1]: Entering directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1' make[2]: Entering directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1' make[2]: Nothing to be done for 'install-exec-am'. /usr/bin/sed -i "s|(DESTDIR)|/builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64|g" libsearpc.pc /usr/bin/mkdir -p '/builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64/usr/lib64/pkgconfig' /usr/bin/install -p -m 644 libsearpc.pc '/builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64/usr/lib64/pkgconfig' make[2]: Leaving directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1' make[1]: Leaving directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1' + find /builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64 -name '*.la' -exec rm -f '{}' ';' + /usr/lib/rpm/find-debuginfo.sh -j2 --strict-build-id -m -i --build-id-seed 3.3-1.el8 --unique-debug-suffix -3.3-1.el8.x86_64 --unique-debug-src-base libsearpc-3.3-1.el8.x86_64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000 -S debugsourcefiles.list /builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1 extracting debug info from /builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64/usr/lib64/libsearpc.so.1.0.2 /usr/lib/rpm/sepdebugcrcfix: Updated 1 CRC32s, 0 CRC32s did match. 136 blocks + /usr/lib/rpm/check-buildroot + /usr/lib/rpm/redhat/brp-ldconfig /sbin/ldconfig: Warning: ignoring configuration file that cannot be opened: /etc/ld.so.conf: No such file or directory + /usr/lib/rpm/brp-compress + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-python-bytecompile '' 1 Bytecompiling .py files below /builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64/usr/lib64/python3.6 using /usr/libexec/platform-python + /usr/lib/rpm/brp-python-hardlink + PYTHON3=/usr/bin/python3.6 + /usr/lib/rpm/redhat/brp-mangle-shebangs Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.zqH3U2 + umask 022 + cd /builddir/build/BUILD + cd libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1 + /usr/bin/make -O -j2 check Making check in lib make[1]: Nothing to be done for 'check'. Making check in pysearpc make[1]: Nothing to be done for 'check'. Making check in tests /usr/bin/make check-am /usr/bin/make test-searpc make[3]: Entering directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/tests' gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I../lib -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -c -o clar.o clar.c In file included from clar.c:565: clar/sandbox.h: In function 'clar_unsandbox': clar/sandbox.h:68:2: warning: ignoring return value of 'chdir', declared with attribute warn_unused_result [-Wunused-result] chdir(".."); ^~~~~~~~~~~ In file included from clar.c:567: At top level: clar/fs.h:285:1: warning: 'fs_copy' defined but not used [-Wunused-function] fs_copy(const char *_source, const char *dest) ^~~~~~~ In file included from clar.c:566: clar/fixtures.h:2:1: warning: 'fixture_path' defined but not used [-Wunused-function] fixture_path(const char *base, const char *fixture_name) ^~~~~~~~~~~~ make[3]: Leaving directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/tests' make[3]: Entering directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/tests' gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I../lib -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -c -o searpc.o searpc.c make[3]: Leaving directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/tests' make[3]: Entering directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/tests' gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I../lib -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -c -o main.o main.c make[3]: Leaving directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/tests' make[3]: Entering directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/tests' /bin/sh ../libtool --tag=CC --mode=link gcc -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I../lib -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -static -Wl,-z,relro -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -o test-searpc searpc.o clar.o main.o -lgobject-2.0 -lglib-2.0 -ljansson ../lib/libsearpc.la libtool: link: gcc -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I../lib -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -Wl,-z -Wl,relro -Wl,-z -Wl,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -o test-searpc searpc.o clar.o main.o ../lib/.libs/libsearpc.so -lgobject-2.0 -lglib-2.0 -ljansson -lpthread -Wl,-rpath -Wl,/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/lib/.libs make[3]: Leaving directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/tests' /usr/bin/make check-TESTS make[4]: Entering directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/tests' PASS: test-searpc make[4]: Leaving directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/tests' make[4]: Entering directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/tests' ============================================================================ Testsuite summary for libsearpc 3.1.0 ============================================================================ # TOTAL: 1 # PASS: 1 # SKIP: 0 # XFAIL: 0 # FAIL: 0 # XPASS: 0 # ERROR: 0 ============================================================================ make[4]: Leaving directory '/builddir/build/BUILD/libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1/tests' + exit 0 Processing files: libsearpc-3.3-1.el8.x86_64 Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.d8FUQr + umask 022 + cd /builddir/build/BUILD + cd libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1 + DOCDIR=/builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64/usr/share/doc/libsearpc + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64/usr/share/doc/libsearpc + cp -pr AUTHORS /builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64/usr/share/doc/libsearpc + cp -pr README.markdown /builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64/usr/share/doc/libsearpc + exit 0 Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.4k6Mmn + umask 022 + cd /builddir/build/BUILD + cd libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1 + LICENSEDIR=/builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64/usr/share/licenses/libsearpc + export LC_ALL=C + LC_ALL=C + export LICENSEDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64/usr/share/licenses/libsearpc + cp -pr LICENSE.txt /builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64/usr/share/licenses/libsearpc + exit 0 Provides: libsearpc = 3.3-1.el8 libsearpc(x86-64) = 3.3-1.el8 libsearpc.so.1()(64bit) Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /usr/bin/python3.6 libc.so.6()(64bit) libc.so.6(GLIBC_2.14)(64bit) libc.so.6(GLIBC_2.2.5)(64bit) libc.so.6(GLIBC_2.3.4)(64bit) libc.so.6(GLIBC_2.4)(64bit) libglib-2.0.so.0()(64bit) libgobject-2.0.so.0()(64bit) libjansson.so.4()(64bit) libjansson.so.4(libjansson.so.4)(64bit) libpthread.so.0()(64bit) libpthread.so.0(GLIBC_2.2.5)(64bit) python(abi) = 3.6 rtld(GNU_HASH) Processing files: libsearpc-devel-3.3-1.el8.x86_64 Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.K1E1TS + umask 022 + cd /builddir/build/BUILD + cd libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1 + LICENSEDIR=/builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64/usr/share/licenses/libsearpc-devel + export LC_ALL=C + LC_ALL=C + export LICENSEDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64/usr/share/licenses/libsearpc-devel + cp -pr LICENSE.txt /builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64/usr/share/licenses/libsearpc-devel + exit 0 Provides: libsearpc-devel = 3.3-1.el8 libsearpc-devel(x86-64) = 3.3-1.el8 pkgconfig(libsearpc) = 3.1.0 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /usr/bin/pkg-config libsearpc.so.1()(64bit) pkgconfig(gio-2.0) pkgconfig(gobject-2.0) pkgconfig(jansson) Processing files: libsearpc-debugsource-3.3-1.el8.x86_64 Provides: libsearpc-debugsource = 3.3-1.el8 libsearpc-debugsource(x86-64) = 3.3-1.el8 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Processing files: libsearpc-debuginfo-3.3-1.el8.x86_64 Provides: debuginfo(build-id) = 91212deaad692d3f9d44dc214fea65a2d1c1c3a2 libsearpc-debuginfo = 3.3-1.el8 libsearpc-debuginfo(x86-64) = 3.3-1.el8 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Recommends: libsearpc-debugsource(x86-64) = 3.3-1.el8 Checking for unpackaged file(s): /usr/lib/rpm/check-files /builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64 Wrote: /builddir/build/RPMS/libsearpc-3.3-1.el8.x86_64.rpm Wrote: /builddir/build/RPMS/libsearpc-devel-3.3-1.el8.x86_64.rpm Wrote: /builddir/build/RPMS/libsearpc-debugsource-3.3-1.el8.x86_64.rpm Wrote: /builddir/build/RPMS/libsearpc-debuginfo-3.3-1.el8.x86_64.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.KIeuk8 + umask 022 + cd /builddir/build/BUILD + cd libsearpc-783141fb694f3bd1f8bd8a783670dd25a53b9fc1 + /usr/bin/rm -rf /builddir/build/BUILDROOT/libsearpc-3.3-1.el8.x86_64 + exit 0 Finish: rpmbuild libsearpc-3.3-1.el8.src.rpm Finish: build phase for libsearpc-3.3-1.el8.src.rpm INFO: chroot_scan: 3 files copied to /var/lib/copr-rpmbuild/results/chroot_scan INFO: /var/lib/mock/rhel+epel-8-x86_64-1692252681.379848/root/var/log/dnf.rpm.log /var/lib/mock/rhel+epel-8-x86_64-1692252681.379848/root/var/log/dnf.librepo.log /var/lib/mock/rhel+epel-8-x86_64-1692252681.379848/root/var/log/dnf.log INFO: Done(/var/lib/copr-rpmbuild/results/libsearpc-3.3-1.el8.src.rpm) Config(child) 0 minutes 35 seconds INFO: Results and/or logs in: /var/lib/copr-rpmbuild/results INFO: Cleaning up build root ('cleanup_on_success=True') Start: clean chroot INFO: unmounting tmpfs. Finish: clean chroot Finish: run Running RPMResults tool Package info: { "packages": [ { "name": "libsearpc", "epoch": null, "version": "3.3", "release": "1.el8", "arch": "src" }, { "name": "libsearpc", "epoch": null, "version": "3.3", "release": "1.el8", "arch": "x86_64" }, { "name": "libsearpc-devel", "epoch": null, "version": "3.3", "release": "1.el8", "arch": "x86_64" }, { "name": "libsearpc-debugsource", "epoch": null, "version": "3.3", "release": "1.el8", "arch": "x86_64" }, { "name": "libsearpc-debuginfo", "epoch": null, "version": "3.3", "release": "1.el8", "arch": "x86_64" } ] } RPMResults finished