# -*- rpm-spec -*-

# This spec file assumes you are building on a Fedora or RHEL version
# that's still supported by the vendor. It may work on other distros
# or versions, but no effort will be made to ensure that going forward.
%define min_rhel 7
%define min_fedora 29

%if (0%{?fedora} && 0%{?fedora} >= %{min_fedora}) || (0%{?rhel} && 0%{?rhel} >= %{min_rhel})
    %define supported_platform 1
%else
    %define supported_platform 0
%endif

# Default to skipping autoreconf.  Distros can change just this one line
# (or provide a command-line override) if they backport any patches that
# touch configure.ac or Makefile.am.
# Always run autoreconf
%{!?enable_autotools:%global enable_autotools 1}

# The hypervisor drivers that run in libvirtd
%define with_qemu          0%{!?_without_qemu:1}
%define with_lxc           0%{!?_without_lxc:1}
%define with_libxl         0%{!?_without_libxl:1}
%define with_vbox          0%{!?_without_vbox:1}

%define with_qemu_tcg      %{with_qemu}

%define qemu_kvm_arches %{ix86} x86_64

%if 0%{?fedora}
    %define qemu_kvm_arches %{ix86} x86_64 %{power64} s390x %{arm} aarch64
%endif

%if 0%{?rhel}
    %define with_qemu_tcg 0
    %define qemu_kvm_arches x86_64 %{power64} aarch64 s390x
%endif

%ifarch %{qemu_kvm_arches}
    %define with_qemu_kvm      %{with_qemu}
%else
    %define with_qemu_kvm      0
%endif

%if ! %{with_qemu_tcg} && ! %{with_qemu_kvm}
    %define with_qemu 0
%endif

# Then the hypervisor drivers that run outside libvirtd, in libvirt.so
%define with_openvz        0%{!?_without_openvz:1}
%define with_vmware        0%{!?_without_vmware:1}
%define with_phyp          0%{!?_without_phyp:1}
%define with_esx           0%{!?_without_esx:1}
%define with_hyperv        0%{!?_without_hyperv:1}

# Then the secondary host drivers, which run inside libvirtd
%define with_storage_rbd      0%{!?_without_storage_rbd:1}
%if 0%{?fedora}
    %define with_storage_sheepdog 0%{!?_without_storage_sheepdog:1}
%else
    %define with_storage_sheepdog 0
%endif
%define with_numactl          0%{!?_without_numactl:1}

%define with_storage_gluster 0%{!?_without_storage_gluster:1}
%ifnarch %{qemu_kvm_arches}
    # gluster is only built where qemu driver is enabled on RHEL 8
    %if 0%{?rhel} >= 8
        %define with_storage_gluster 0
    %endif
%endif


# F25+ has zfs-fuse
%if 0%{?fedora}
    %define with_storage_zfs      0%{!?_without_storage_zfs:1}
%else
    %define with_storage_zfs      0
%endif

# We need a recent enough libiscsi (>= 1.18.0)
%if 0%{?fedora} || 0%{?rhel} > 7
    %define with_storage_iscsi_direct 0%{!?_without_storage_iscsi_direct:1}
%else
    %define with_storage_iscsi_direct 0
%endif

# A few optional bits off by default, we enable later
%define with_fuse          0%{!?_without_fuse:0}
%define with_sanlock       0%{!?_without_sanlock:0}
%define with_numad         0%{!?_without_numad:0}
%define with_firewalld     0%{!?_without_firewalld:0}
%define with_firewalld_zone 0%{!?_without_firewalld_zone:0}
%define with_libssh2       0%{!?_without_libssh2:0}
%define with_wireshark     0%{!?_without_wireshark:0}
%define with_libssh        0%{!?_without_libssh:0}
%define with_bash_completion  0%{!?_without_bash_completion:0}

# Finally set the OS / architecture specific special cases

# Xen is available only on i386 x86_64 ia64
%ifnarch %{ix86} x86_64 ia64
    %define with_libxl 0
%endif

# vbox is available only on i386 x86_64
%ifnarch %{ix86} x86_64
    %define with_vbox 0
%endif

# Numactl is not available on many non-x86 archs
%ifarch s390 s390x %{arm} riscv64
    %define with_numactl 0
%endif

# zfs-fuse is not available on some architectures
%ifarch s390 s390x aarch64 riscv64
    %define with_storage_zfs 0
%endif

# Ceph dropping support for 32-bit hosts
%if 0%{?fedora} >= 30
    %ifarch %{arm} %{ix86}
        %define with_storage_rbd 0
    %endif
%endif

# RHEL doesn't ship OpenVZ, VBox, PowerHypervisor,
# VMware, libxenserver (xenapi), libxenlight (Xen 4.1 and newer),
# or HyperV.
%if 0%{?rhel}
    %define with_openvz 0
    %define with_vbox 0
    %define with_phyp 0
    %define with_vmware 0
    %define with_xenapi 0
    %define with_libxl 0
    %define with_hyperv 0
    %define with_vz 0

    %if 0%{?rhel} > 7
        %define with_lxc 0
    %endif
%endif

%define with_firewalld 1

%if 0%{?fedora} >= 31 || 0%{?rhel} > 7
    %define with_firewalld_zone 0%{!?_without_firewalld_zone:1}
%endif


# fuse is used to provide virtualized /proc for LXC
%if %{with_lxc}
    %define with_fuse      0%{!?_without_fuse:1}
%endif

# Enable sanlock library for lock management with QEMU
# Sanlock is available only on arches where kvm is available for RHEL
%if 0%{?fedora}
    %define with_sanlock 0%{!?_without_sanlock:1}
%endif
%if 0%{?rhel}
    %ifarch %{qemu_kvm_arches}
        %define with_sanlock 0%{!?_without_sanlock:1}
    %endif
%endif

# Enable libssh2 transport for new enough distros
%if 0%{?fedora}
    %define with_libssh2 0%{!?_without_libssh2:1}
%endif

# Enable wireshark plugins for all distros shipping libvirt 1.2.2 or newer
%if 0%{?fedora}
    %define with_wireshark 0%{!?_without_wireshark:1}
    %define wireshark_plugindir %(pkg-config --variable plugindir wireshark)/epan
%endif

# Enable libssh transport for new enough distros
%if 0%{?fedora} || 0%{?rhel} > 7
    %define with_libssh 0%{!?_without_libssh:1}
%endif

%define with_bash_completion  0%{!?_without_bash_completion:1}

# Use Python 3 when possible, Python 2 otherwise
%if 0%{?fedora}
    %define python python3
%else
    %if 0%{?rhel} > 7
        %define python python3-devel
    %else
        %define python python2
    %endif
%endif


%if %{with_qemu} || %{with_lxc}
# numad is used to manage the CPU and memory placement dynamically,
# it's not available on many non-x86 architectures.
    %ifnarch s390 s390x %{arm} riscv64
        %define with_numad    0%{!?_without_numad:1}
    %endif
%endif

# Force QEMU to run as non-root
%define qemu_user  qemu
%define qemu_group  qemu


# RHEL releases provide stable tool chains and so it is safe to turn
# compiler warning into errors without being worried about frequent
# changes in reported warnings
%if 0%{?rhel}
    %define enable_werror --enable-werror
%else
    %define enable_werror --disable-werror
%endif

%if 0%{?rhel} == 7
    %define tls_priority "NORMAL"
%else
    %define tls_priority "@LIBVIRT,SYSTEM"
%endif


Summary: Library providing a simple virtualization API
Name: libvirt
Version: 5.6.0
Release: 10%{?dist}%{?extra_release}
License: LGPLv2+
URL: https://libvirt.org/

%if %(echo %{version} | grep -q "\.0$"; echo $?) == 1
    %define mainturl stable_updates/
%endif
Source: https://libvirt.org/sources/%{?mainturl}libvirt-%{version}.tar.xz
Source1: symlinks

Patch1: libvirt-RHEL-Hack-around-changed-Broadwell-Haswell-CPUs.patch
Patch2: libvirt-RHEL-Add-rhel-machine-types-to-qemuDomainMachineNeedsFDC.patch
Patch3: libvirt-RHEL-Fix-virConnectGetMaxVcpus-output.patch
Patch4: libvirt-RHEL-qemu-Add-ability-to-set-sgio-values-for-hostdev.patch
Patch5: libvirt-RHEL-qemu-Add-check-for-unpriv-sgio-for-SCSI-generic-host-device.patch
Patch6: libvirt-RHEL-qemu-Alter-val-usage-in-qemuSetUnprivSGIO.patch
Patch7: libvirt-RHEL-qemu-Alter-qemuSetUnprivSGIO-hostdev-shareable-logic.patch
Patch8: libvirt-RHEL-qemu-Fix-logic-error-in-qemuSetUnprivSGIO.patch
Patch9: libvirt-RHEL-qemu-Fix-crash-trying-to-use-iSCSI-hostdev.patch
Patch10: libvirt-RHEL-Revert-configure-Remove-enable-test-coverage.patch
Patch11: libvirt-Revert-tpm-Check-TPM-XML-device-configuration-changes-after-edit.patch
Patch12: libvirt-qemu-Clarify-error-message-in-qemuMigrationSrcIsSafe.patch
Patch13: libvirt-qemu-Check-for-drop-cache-capability.patch
Patch14: libvirt-qemu-Allow-migration-with-disk-cache-on.patch
Patch15: libvirt-qemu-Pass-qemuCaps-to-qemuDomainDefCopy.patch
Patch16: libvirt-qemu-Pass-qemuCaps-to-qemuDomainDefFormatBufInternal.patch
Patch17: libvirt-qemu-Pass-qemuCaps-to-qemuDomainSaveImageOpen.patch
Patch18: libvirt-qemu-Pass-qemuCaps-to-qemuMigrationAnyPrepareDef.patch
Patch19: libvirt-qemu-Pass-correct-qemuCaps-to-virDomainDefParseString.patch
Patch20: libvirt-qemu-Pass-qemuCaps-to-qemuMigrationCookieXMLParse.patch
Patch21: libvirt-qemu-Pass-correct-qemuCaps-to-virDomainDefCopy.patch
Patch22: libvirt-qemu-Pass-correct-qemuCaps-to-virDomainDefPostParse.patch
Patch23: libvirt-qemu-Pass-correct-qemuCaps-to-virDomainDefParseNode.patch
Patch24: libvirt-qemu-Pass-correct-qemuCaps-to-virDomainDeviceDefPostParse.patch
Patch25: libvirt-qemu-Fix-crash-on-incoming-migration.patch
Patch26: libvirt-network-fix-crash-during-cleanup-from-failure-to-allocate-port.patch
Patch27: libvirt-network-replace-virSaveLastError-with-virErrorPreserveLast.patch
Patch28: libvirt-access-fix-incorrect-addition-to-virAccessPermNetwork.patch
Patch29: libvirt-util-allow-tap-based-guest-interfaces-to-have-MAC-address-prefix-0xFE.patch
Patch30: libvirt-vircgroupv2-fix-parsing-multiple-values-in-single-file.patch
Patch31: libvirt-vircgroupv2-fix-virCgroupV2GetCpuCfsQuota-for-max-value.patch
Patch32: libvirt-network-fix-ability-to-use-openvswitch-with-vlans.patch
Patch33: libvirt-remote-use-Wants-instead-of-Requires-for-libvirtd-sockets.patch
Patch34: libvirt-remote-move-timeout-arg-into-sysconf-file.patch
Patch35: libvirt-remote-forbid-the-listen-arg-when-systemd-socket-activation.patch
Patch36: libvirt-qemuBuildHotpluggableCPUProps-use-VIR_RETURN_PTR.patch
Patch37: libvirt-qemu-Extract-and-store-vCPU-properties-as-qemu-returned-them.patch
Patch38: libvirt-qemu-command-Use-all-vCPU-properties-when-creating-args-for-vCPU-hotplug.patch
Patch39: libvirt-qemu-alias-Generate-qomName-of-disk-with-useraliases.patch
Patch40: libvirt-src-security-Replace-bitwise-OR-with-logical-OR.patch
Patch41: libvirt-security_util-Use-more-VIR_AUTOFREE.patch
Patch42: libvirt-security_util-Document-virSecurityMoveRememberedLabel.patch
Patch43: libvirt-security-Don-t-increase-XATTRs-refcounter-on-failure.patch
Patch44: libvirt-util-Introduce-virhostuptime.patch
Patch45: libvirt-security_util-Remove-stale-XATTRs.patch
Patch46: libvirt-security_util-verify-xattrs-only-if-ref-is-present.patch
Patch47: libvirt-virSecuritySELinuxSetFileconImpl-Drop-optional-argument.patch
Patch48: libvirt-security_selinux-Drop-virSecuritySELinuxSetFileconOptional.patch
Patch49: libvirt-security_selinux-Drop-optional-from-_virSecuritySELinuxContextItem.patch
Patch50: libvirt-security_selinux-Drop-virSecuritySELinuxSetFileconHelper.patch
Patch51: libvirt-security_selinux-Play-nicely-with-network-FS-that-only-emulates-SELinux.patch
Patch52: libvirt-qemu_blockjob-Print-image-path-on-failed-security-metadata-move-too.patch
Patch53: libvirt-qemu_blockjob-Remove-secdriver-metadata-more-frequently.patch
Patch54: libvirt-vircgroupv2-fix-abort-in-VIR_AUTOFREE.patch
Patch55: libvirt-vircgroupv2-fix-setting-cpu.max-period.patch
Patch56: libvirt-remote-fix-registration-of-TLS-socket.patch
Patch57: libvirt-qemu_blockjob-Remove-secdriver-metadata-for-whole-backing-chain-on-job-completion.patch
Patch58: libvirt-qemu_driver-Fix-comment-of-qemuStateCleanup.patch
Patch59: libvirt-driver-Introduce-virDriverShouldAutostart.patch
Patch60: libvirt-lib-autostart-objects-exactly-once.patch
Patch61: libvirt-Revert-src-Document-autostart-for-session-demon.patch
Patch62: libvirt-security-Pass-migrated-to-virSecurityManagerSetAllLabel.patch
Patch63: libvirt-security-Rename-virSecurityManagerGetDriver-to-virSecurityManagerGetVirtDriver.patch
Patch64: libvirt-security-Introduce-virSecurityManagerGetDriver.patch
Patch65: libvirt-security_stack-Turn-list-of-nested-drivers-into-a-doubly-linked-list.patch
Patch66: libvirt-security_stack-Perform-rollback-if-one-of-stacked-drivers-fails.patch
Patch67: libvirt-util-new-function-virNetDevMacVLanIsMacvtap.patch
Patch68: libvirt-util-make-a-couple-virNetDevMacVlan-functions-public.patch
Patch69: libvirt-qemu-reorganize-qemuInterfaceEthernetConnect.patch
Patch70: libvirt-conf-use-virXMLFormatElement-for-interface-target.patch
Patch71: libvirt-conf-new-managed-attribute-for-target-dev-of-interface-type-ethernet.patch
Patch72: libvirt-qemu-support-unmanaged-target-tap-dev-for-interface-type-ethernet.patch
Patch73: libvirt-qemu-support-unmanaged-macvtap-devices-with-interface-type-ethernet.patch
Patch74: libvirt-qemu-avoid-double-reservation-of-PCI-address-for-interface-type-hostdev.patch
Patch75: libvirt-domain_conf-Make-virDomainDeviceFindSCSIController-accept-virDomainDeviceDriveAddress-struct.patch
Patch76: libvirt-domain_conf-Relax-SCSI-addr-used-check.patch
Patch77: libvirt-cpu_conf-Pass-policy-to-CPU-feature-filtering-callbacks.patch
Patch78: libvirt-qemuxml2-test-Add-tests-for-Icelake-Server-pconfig.patch
Patch79: libvirt-qemu-Drop-disabled-CPU-features-unknown-to-QEMU.patch
Patch80: libvirt-cputest-Add-data-for-Ice-Lake-Server-CPU.patch
Patch81: libvirt-cpu_map-Drop-pconfig-from-Icelake-Server-CPU-model.patch
Patch82: libvirt-qemu-Fix-NULL-ptr-dereference-caused-by-qemuDomainDefFormatBufInternal.patch
Patch83: libvirt-qemu-Separate-image-metadata-removal-into-a-function.patch
Patch84: libvirt-qemuProcessStop-Remove-image-metadata-for-running-mirror-jobs.patch
Patch85: libvirt-qemu-fix-EFI-nvram-removal-on-domain-undefine.patch
Patch86: libvirt-util-introduce-virPCIDeviceConfigOpenInternal.patch
Patch87: libvirt-util-Introduce-virPCIDeviceConfigOpenWrite.patch
Patch88: libvirt-util-introduce-readonly-attribute-to-virPCIDeviceConfigOpenInternal.patch
Patch89: libvirt-util-introduce-virPCIDeviceConfigOpenTry.patch
Patch90: libvirt-util-default-to-read-only-in-virPCIDeviceConfigOpen.patch
Patch91: libvirt-virpcimock-Mock-__open_2.patch
Patch92: libvirt-tests-virpcimock-Always-declare-__open_2.patch
Patch93: libvirt-qemu-Add-support-for-setting-string-migration-params.patch
Patch94: libvirt-Introduce-VIR_MIGRATE_PARAM_TLS_DESTINATION-migration-param.patch
Patch95: libvirt-qemu-Implement-VIR_MIGRATE_PARAM_TLS_DESTINATION.patch
Patch96: libvirt-virsh-Add-tls-destination-option-for-migrate-command.patch

Requires: libvirt-daemon = %{version}-%{release}
Requires: libvirt-daemon-config-network = %{version}-%{release}
Requires: libvirt-daemon-config-nwfilter = %{version}-%{release}
%if %{with_libxl}
Requires: libvirt-daemon-driver-libxl = %{version}-%{release}
%endif
%if %{with_lxc}
Requires: libvirt-daemon-driver-lxc = %{version}-%{release}
%endif
%if %{with_qemu}
Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
%endif
# We had UML driver, but we've removed it.
Obsoletes: libvirt-daemon-driver-uml <= 5.0.0
Obsoletes: libvirt-daemon-uml <= 5.0.0
%if %{with_vbox}
Requires: libvirt-daemon-driver-vbox = %{version}-%{release}
%endif
Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}

Requires: libvirt-daemon-driver-interface = %{version}-%{release}
Requires: libvirt-daemon-driver-secret = %{version}-%{release}
Requires: libvirt-daemon-driver-storage = %{version}-%{release}
Requires: libvirt-daemon-driver-network = %{version}-%{release}
Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
Requires: libvirt-client = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}

# All build-time requirements. Run-time requirements are
# listed against each sub-RPM
%if 0%{?enable_autotools}
BuildRequires: autoconf
BuildRequires: automake
BuildRequires: gettext-devel
BuildRequires: libtool
BuildRequires: /usr/bin/pod2man
%endif
BuildRequires: gcc
BuildRequires: git
%if 0%{?fedora} || 0%{?rhel} > 7
BuildRequires: perl-interpreter
%else
BuildRequires: perl
%endif
BuildRequires: %{python}
BuildRequires: systemd-units
%if %{with_libxl}
BuildRequires: xen-devel
%endif
BuildRequires: libxml2-devel
BuildRequires: libxslt
BuildRequires: readline-devel
%if %{with_bash_completion}
BuildRequires: bash-completion >= 2.0
%endif
BuildRequires: ncurses-devel
BuildRequires: gettext
BuildRequires: libtasn1-devel
BuildRequires: gnutls-devel
BuildRequires: libattr-devel
# For pool-build probing for existing pools
BuildRequires: libblkid-devel >= 2.17
# for augparse, optionally used in testing
BuildRequires: augeas
BuildRequires: systemd-devel >= 185
BuildRequires: libpciaccess-devel >= 0.10.9
BuildRequires: yajl-devel
%if %{with_sanlock}
BuildRequires: sanlock-devel >= 2.4
%endif
BuildRequires: libpcap-devel
BuildRequires: libnl3-devel
BuildRequires: libselinux-devel
BuildRequires: dnsmasq >= 2.41
BuildRequires: iptables
BuildRequires: radvd
BuildRequires: ebtables
BuildRequires: module-init-tools
BuildRequires: cyrus-sasl-devel
BuildRequires: polkit >= 0.112
# For mount/umount in FS driver
BuildRequires: util-linux
%if %{with_qemu}
# For managing ACLs
BuildRequires: libacl-devel
# From QEMU RPMs
BuildRequires: /usr/bin/qemu-img
%endif
# For LVM drivers
BuildRequires: lvm2
# For pool type=iscsi
BuildRequires: iscsi-initiator-utils
%if %{with_storage_iscsi_direct}
# For pool type=iscsi-direct
BuildRequires: libiscsi-devel
%endif
# For disk driver
BuildRequires: parted-devel
# For Multipath support
BuildRequires: device-mapper-devel
# For XFS reflink clone support
BuildRequires: xfsprogs-devel
%if %{with_storage_rbd}
BuildRequires: librados2-devel
BuildRequires: librbd1-devel
%endif
%if %{with_storage_gluster}
BuildRequires: glusterfs-api-devel >= 3.4.1
BuildRequires: glusterfs-devel >= 3.4.1
%endif
%if %{with_storage_sheepdog}
BuildRequires: sheepdog
%endif
%if %{with_storage_zfs}
# Support any conforming implementation of zfs. On stock Fedora
# this is zfs-fuse, but could be zfsonlinux upstream RPMs
BuildRequires: /sbin/zfs
BuildRequires: /sbin/zpool
%endif
%if %{with_numactl}
# For QEMU/LXC numa info
BuildRequires: numactl-devel
%endif
BuildRequires: libcap-ng-devel >= 0.5.0
%if %{with_fuse}
BuildRequires: fuse-devel >= 2.8.6
%endif
%if %{with_phyp} || %{with_libssh2}
BuildRequires: libssh2-devel >= 1.3.0
%endif

BuildRequires: netcf-devel >= 0.2.2
%if %{with_esx}
BuildRequires: libcurl-devel
%endif
%if %{with_hyperv}
BuildRequires: libwsman-devel >= 2.2.3
%endif
BuildRequires: audit-libs-devel
# we need /usr/sbin/dtrace
BuildRequires: systemtap-sdt-devel

# For mount/umount in FS driver
BuildRequires: util-linux
# For showmount in FS driver (netfs discovery)
BuildRequires: nfs-utils

# Communication with the firewall and polkit daemons use DBus
BuildRequires: dbus-devel

# Fedora build root suckage
BuildRequires: gawk

# For storage wiping with different algorithms
BuildRequires: scrub

%if %{with_numad}
BuildRequires: numad
%endif

%if %{with_wireshark}
BuildRequires: wireshark-devel >= 2.4.0
%endif

%if %{with_libssh}
BuildRequires: libssh-devel >= 0.7.0
%endif

%if 0%{?fedora} || 0%{?rhel} > 7
BuildRequires: rpcgen
BuildRequires: libtirpc-devel
%endif

%if %{with_firewalld_zone}
BuildRequires: firewalld-filesystem
%endif

Provides: bundled(gnulib)

%description
Libvirt is a C toolkit to interact with the virtualization capabilities
of recent versions of Linux (and other OSes). The main package includes
the libvirtd server exporting the virtualization support.

%package docs
Summary: API reference and website documentation

%description docs
Includes the API reference for the libvirt C library, and a complete
copy of the libvirt.org website documentation.

%package daemon
Summary: Server side daemon and supporting files for libvirt library

# All runtime requirements for the libvirt package (runtime requrements
# for subpackages are listed later in those subpackages)

# The client side, i.e. shared libs are in a subpackage
Requires: %{name}-libs = %{version}-%{release}

# for modprobe of pci devices
Requires: module-init-tools

# for /sbin/ip & /sbin/tc
Requires: iproute
# tc is provided by iproute-tc since at least Fedora 26
%if 0%{?fedora} || 0%{?rhel} > 7
Requires: iproute-tc
%endif

Requires: polkit >= 0.112
%ifarch %{ix86} x86_64 ia64
# For virConnectGetSysinfo
Requires: dmidecode
%endif
# For service management
Requires(post): systemd-units
Requires(post): systemd-sysv
Requires(preun): systemd-units
Requires(postun): systemd-units
%if %{with_numad}
Requires: numad
%endif
# libvirtd depends on 'messagebus' service
Requires: dbus
# For uid creation during pre
Requires(pre): shadow-utils

%description daemon
Server side daemon required to manage the virtualization capabilities
of recent versions of Linux. Requires a hypervisor specific sub-RPM
for specific drivers.

%package daemon-config-network
Summary: Default configuration files for the libvirtd daemon

Requires: libvirt-daemon = %{version}-%{release}
Requires: libvirt-daemon-driver-network = %{version}-%{release}

%description daemon-config-network
Default configuration files for setting up NAT based networking

%package daemon-config-nwfilter
Summary: Network filter configuration files for the libvirtd daemon

Requires: libvirt-daemon = %{version}-%{release}
Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}

%description daemon-config-nwfilter
Network filter configuration files for cleaning guest traffic

%package daemon-driver-network
Summary: Network driver plugin for the libvirtd daemon
Requires: libvirt-daemon = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
Requires: dnsmasq >= 2.41
Requires: radvd
Requires: iptables

%description daemon-driver-network
The network driver plugin for the libvirtd daemon, providing
an implementation of the virtual network APIs using the Linux
bridge capabilities.


%package daemon-driver-nwfilter
Summary: Nwfilter driver plugin for the libvirtd daemon
Requires: libvirt-daemon = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
Requires: iptables
Requires: ebtables

%description daemon-driver-nwfilter
The nwfilter driver plugin for the libvirtd daemon, providing
an implementation of the firewall APIs using the ebtables,
iptables and ip6tables capabilities


%package daemon-driver-nodedev
Summary: Nodedev driver plugin for the libvirtd daemon
Requires: libvirt-daemon = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
# needed for device enumeration
Requires: systemd >= 185

%description daemon-driver-nodedev
The nodedev driver plugin for the libvirtd daemon, providing
an implementation of the node device APIs using the udev
capabilities.


%package daemon-driver-interface
Summary: Interface driver plugin for the libvirtd daemon
Requires: libvirt-daemon = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
Requires: netcf-libs >= 0.2.2

%description daemon-driver-interface
The interface driver plugin for the libvirtd daemon, providing
an implementation of the network interface APIs using the
netcf library


%package daemon-driver-secret
Summary: Secret driver plugin for the libvirtd daemon
Requires: libvirt-daemon = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}

%description daemon-driver-secret
The secret driver plugin for the libvirtd daemon, providing
an implementation of the secret key APIs.

%package daemon-driver-storage-core
Summary: Storage driver plugin including base backends for the libvirtd daemon
Requires: libvirt-daemon = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
Requires: nfs-utils
# For mkfs
Requires: util-linux
%if %{with_qemu}
# From QEMU RPMs
Requires: /usr/bin/qemu-img
%endif
%if !%{with_storage_rbd}
Obsoletes: libvirt-daemon-driver-storage-rbd < %{version}-%{release}
%endif

%description daemon-driver-storage-core
The storage driver plugin for the libvirtd daemon, providing
an implementation of the storage APIs using files, local disks, LVM, SCSI,
iSCSI, and multipath storage.

%package daemon-driver-storage-logical
Summary: Storage driver plugin for lvm volumes
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
Requires: lvm2

%description daemon-driver-storage-logical
The storage driver backend adding implementation of the storage APIs for block
volumes using lvm.


%package daemon-driver-storage-disk
Summary: Storage driver plugin for disk
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
Requires: parted
Requires: device-mapper

%description daemon-driver-storage-disk
The storage driver backend adding implementation of the storage APIs for block
volumes using the host disks.


%package daemon-driver-storage-scsi
Summary: Storage driver plugin for local scsi devices
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}

%description daemon-driver-storage-scsi
The storage driver backend adding implementation of the storage APIs for scsi
host devices.


%package daemon-driver-storage-iscsi
Summary: Storage driver plugin for iscsi
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
Requires: iscsi-initiator-utils

%description daemon-driver-storage-iscsi
The storage driver backend adding implementation of the storage APIs for iscsi
volumes using the host iscsi stack.


%if %{with_storage_iscsi_direct}
%package daemon-driver-storage-iscsi-direct
Summary: Storage driver plugin for iscsi-direct
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
Requires: libiscsi

%description daemon-driver-storage-iscsi-direct
The storage driver backend adding implementation of the storage APIs for iscsi
volumes using libiscsi direct connection.
%endif


%package daemon-driver-storage-mpath
Summary: Storage driver plugin for multipath volumes
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
Requires: device-mapper

%description daemon-driver-storage-mpath
The storage driver backend adding implementation of the storage APIs for
multipath storage using device mapper.


%if %{with_storage_gluster}
%package daemon-driver-storage-gluster
Summary: Storage driver plugin for gluster
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
    %if 0%{?fedora}
Requires: glusterfs-client >= 2.0.1
    %endif
    %if (0%{?fedora} || 0%{?with_storage_gluster})
Requires: /usr/sbin/gluster
    %endif

%description daemon-driver-storage-gluster
The storage driver backend adding implementation of the storage APIs for gluster
volumes using libgfapi.
%endif


%if %{with_storage_rbd}
%package daemon-driver-storage-rbd
Summary: Storage driver plugin for rbd
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}

%description daemon-driver-storage-rbd
The storage driver backend adding implementation of the storage APIs for rbd
volumes using the ceph protocol.
%endif


%if %{with_storage_sheepdog}
%package daemon-driver-storage-sheepdog
Summary: Storage driver plugin for sheepdog
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
Requires: sheepdog

%description daemon-driver-storage-sheepdog
The storage driver backend adding implementation of the storage APIs for
sheepdog volumes using.
%endif


%if %{with_storage_zfs}
%package daemon-driver-storage-zfs
Summary: Storage driver plugin for ZFS
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
# Support any conforming implementation of zfs
Requires: /sbin/zfs
Requires: /sbin/zpool

%description daemon-driver-storage-zfs
The storage driver backend adding implementation of the storage APIs for
ZFS volumes.
%endif


%package daemon-driver-storage
Summary: Storage driver plugin including all backends for the libvirtd daemon
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
Requires: libvirt-daemon-driver-storage-disk = %{version}-%{release}
Requires: libvirt-daemon-driver-storage-logical = %{version}-%{release}
Requires: libvirt-daemon-driver-storage-scsi = %{version}-%{release}
Requires: libvirt-daemon-driver-storage-iscsi = %{version}-%{release}
Requires: libvirt-daemon-driver-storage-mpath = %{version}-%{release}
%if %{with_storage_iscsi_direct}
Requires: libvirt-daemon-driver-storage-iscsi-direct = %{version}-%{release}
%endif
%if %{with_storage_gluster}
Requires: libvirt-daemon-driver-storage-gluster = %{version}-%{release}
%endif
%if %{with_storage_rbd}
Requires: libvirt-daemon-driver-storage-rbd = %{version}-%{release}
%endif
%if %{with_storage_sheepdog}
Requires: libvirt-daemon-driver-storage-sheepdog = %{version}-%{release}
%endif
%if %{with_storage_zfs}
Requires: libvirt-daemon-driver-storage-zfs = %{version}-%{release}
%endif

%description daemon-driver-storage
The storage driver plugin for the libvirtd daemon, providing
an implementation of the storage APIs using LVM, iSCSI,
parted and more.


%if %{with_qemu}
%package daemon-driver-qemu
Summary: QEMU driver plugin for the libvirtd daemon
Requires: libvirt-daemon = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
Requires: /usr/bin/qemu-img
# For image compression
Requires: gzip
Requires: bzip2
Requires: lzop
Requires: xz
    %if 0%{?fedora} || 0%{?rhel} > 7
Requires: systemd-container
    %endif

%description daemon-driver-qemu
The qemu driver plugin for the libvirtd daemon, providing
an implementation of the hypervisor driver APIs using
QEMU
%endif


%if %{with_lxc}
%package daemon-driver-lxc
Summary: LXC driver plugin for the libvirtd daemon
Requires: libvirt-daemon = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
# There really is a hard cross-driver dependency here
Requires: libvirt-daemon-driver-network = %{version}-%{release}
    %if 0%{?fedora} || 0%{?rhel} > 7
Requires: systemd-container
    %endif

%description daemon-driver-lxc
The LXC driver plugin for the libvirtd daemon, providing
an implementation of the hypervisor driver APIs using
the Linux kernel
%endif


%if %{with_vbox}
%package daemon-driver-vbox
Summary: VirtualBox driver plugin for the libvirtd daemon
Requires: libvirt-daemon = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}

%description daemon-driver-vbox
The vbox driver plugin for the libvirtd daemon, providing
an implementation of the hypervisor driver APIs using
VirtualBox
%endif


%if %{with_libxl}
%package daemon-driver-libxl
Summary: Libxl driver plugin for the libvirtd daemon
Requires: libvirt-daemon = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
Obsoletes: libvirt-daemon-driver-xen < 4.3.0

%description daemon-driver-libxl
The Libxl driver plugin for the libvirtd daemon, providing
an implementation of the hypervisor driver APIs using
Libxl
%endif



%if %{with_qemu_tcg}
%package daemon-qemu
Summary: Server side daemon & driver required to run QEMU guests

Requires: libvirt-daemon = %{version}-%{release}
Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
Requires: libvirt-daemon-driver-interface = %{version}-%{release}
Requires: libvirt-daemon-driver-network = %{version}-%{release}
Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
Requires: libvirt-daemon-driver-secret = %{version}-%{release}
Requires: libvirt-daemon-driver-storage = %{version}-%{release}
Requires: qemu

%description daemon-qemu
Server side daemon and driver required to manage the virtualization
capabilities of the QEMU TCG emulators
%endif


%if %{with_qemu_kvm}
%package daemon-kvm
Summary: Server side daemon & driver required to run KVM guests

Requires: libvirt-daemon = %{version}-%{release}
Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
Requires: libvirt-daemon-driver-interface = %{version}-%{release}
Requires: libvirt-daemon-driver-network = %{version}-%{release}
Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
Requires: libvirt-daemon-driver-secret = %{version}-%{release}
Requires: libvirt-daemon-driver-storage = %{version}-%{release}
Requires: qemu-kvm

%description daemon-kvm
Server side daemon and driver required to manage the virtualization
capabilities of the KVM hypervisor
%endif


%if %{with_lxc}
%package daemon-lxc
Summary: Server side daemon & driver required to run LXC guests

Requires: libvirt-daemon = %{version}-%{release}
Requires: libvirt-daemon-driver-lxc = %{version}-%{release}
Requires: libvirt-daemon-driver-interface = %{version}-%{release}
Requires: libvirt-daemon-driver-network = %{version}-%{release}
Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
Requires: libvirt-daemon-driver-secret = %{version}-%{release}
Requires: libvirt-daemon-driver-storage = %{version}-%{release}

%description daemon-lxc
Server side daemon and driver required to manage the virtualization
capabilities of LXC
%endif


%if %{with_libxl}
%package daemon-xen
Summary: Server side daemon & driver required to run XEN guests

Requires: libvirt-daemon = %{version}-%{release}
    %if %{with_libxl}
Requires: libvirt-daemon-driver-libxl = %{version}-%{release}
    %endif
Requires: libvirt-daemon-driver-interface = %{version}-%{release}
Requires: libvirt-daemon-driver-network = %{version}-%{release}
Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
Requires: libvirt-daemon-driver-secret = %{version}-%{release}
Requires: libvirt-daemon-driver-storage = %{version}-%{release}
Requires: xen

%description daemon-xen
Server side daemon and driver required to manage the virtualization
capabilities of XEN
%endif

%if %{with_vbox}
%package daemon-vbox
Summary: Server side daemon & driver required to run VirtualBox guests

Requires: libvirt-daemon = %{version}-%{release}
Requires: libvirt-daemon-driver-vbox = %{version}-%{release}
Requires: libvirt-daemon-driver-interface = %{version}-%{release}
Requires: libvirt-daemon-driver-network = %{version}-%{release}
Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
Requires: libvirt-daemon-driver-secret = %{version}-%{release}
Requires: libvirt-daemon-driver-storage = %{version}-%{release}

%description daemon-vbox
Server side daemon and driver required to manage the virtualization
capabilities of VirtualBox
%endif

%package client
Summary: Client side utilities of the libvirt library
Requires: %{name}-libs = %{version}-%{release}
Requires: readline
Requires: ncurses
# Needed by /usr/libexec/libvirt-guests.sh script.
Requires: gettext
# Needed by virt-pki-validate script.
Requires: gnutls-utils
%if %{with_bash_completion}
Requires: %{name}-bash-completion = %{version}-%{release}
%endif

%description client
The client binaries needed to access the virtualization
capabilities of recent versions of Linux (and other OSes).

%package libs
Summary: Client side libraries
# So remote clients can access libvirt over SSH tunnel
# (client invokes 'nc' against the UNIX socket on the server)
Requires: nc
Requires: cyrus-sasl
# Needed by default sasl.conf - no onerous extra deps, since
# 100's of other things on a system already pull in krb5-libs
Requires: cyrus-sasl-gssapi

%description libs
Shared libraries for accessing the libvirt daemon.

%package admin
Summary: Set of tools to control libvirt daemon
Requires: %{name}-libs = %{version}-%{release}
Requires: readline
%if %{with_bash_completion}
Requires: %{name}-bash-completion = %{version}-%{release}
%endif

%description admin
The client side utilities to control the libvirt daemon.

%if %{with_bash_completion}
%package bash-completion
Summary: Bash completion script

%description bash-completion
Bash completion script stub.
%endif

%if %{with_wireshark}
%package wireshark
Summary: Wireshark dissector plugin for libvirt RPC transactions
Requires: wireshark >= 2.4.0
Requires: %{name}-libs = %{version}-%{release}

%description wireshark
Wireshark dissector plugin for better analysis of libvirt RPC traffic.
%endif

%if %{with_lxc}
%package login-shell
Summary: Login shell for connecting users to an LXC container
Requires: %{name}-libs = %{version}-%{release}

%description login-shell
Provides the set-uid virt-login-shell binary that is used to
connect a user to an LXC container when they login, by switching
namespaces.
%endif

%package devel
Summary: Libraries, includes, etc. to compile with the libvirt library
Requires: %{name}-libs = %{version}-%{release}
Requires: pkgconfig

%description devel
Include header files & development libraries for the libvirt C library.

%if %{with_sanlock}
%package lock-sanlock
Summary: Sanlock lock manager plugin for QEMU driver
Requires: sanlock >= 2.4
#for virt-sanlock-cleanup require augeas
Requires: augeas
Requires: %{name}-daemon = %{version}-%{release}
Requires: %{name}-libs = %{version}-%{release}

%description lock-sanlock
Includes the Sanlock lock manager plugin for the QEMU
driver
%endif

%package nss
Summary: Libvirt plugin for Name Service Switch
Requires: libvirt-daemon-driver-network = %{version}-%{release}

%description nss
Libvirt plugin for NSS for translating domain names into IP addresses.


%prep

%autosetup -S git_am -N

# "make dist" replaces all symlinks with a copy of the linked files;
# we need to replace all of them with the original symlinks
echo "Restoring symlinks"
while read lnk target; do
    if [ -e $lnk ]; then
        rm -rf $lnk
        ln -s $target $lnk
    fi
done <%{_sourcedir}/symlinks || exit 1
git add .
git commit -q -a --author 'rpm-build <rpm-build>' -m symlinks


git config gc.auto 0

%autopatch

%build
%if ! %{supported_platform}
echo "This RPM requires either Fedora >= %{min_fedora} or RHEL >= %{min_rhel}"
exit 1
%endif

%if %{with_qemu}
    %define arg_qemu --with-qemu
%else
    %define arg_qemu --without-qemu
%endif

%if %{with_openvz}
    %define arg_openvz --with-openvz
%else
    %define arg_openvz --without-openvz
%endif

%if %{with_lxc}
    %define arg_lxc --with-lxc
    %define arg_login_shell --with-login-shell
%else
    %define arg_lxc --without-lxc
    %define arg_login_shell --without-login-shell
%endif

%if %{with_vbox}
    %define arg_vbox --with-vbox
%else
    %define arg_vbox --without-vbox
%endif

%if %{with_libxl}
    %define arg_libxl --with-libxl
%else
    %define arg_libxl --without-libxl
%endif

%if %{with_phyp}
    %define arg_phyp --with-phyp
%else
    %define arg_phyp --without-phyp
%endif

%if %{with_esx}
    %define arg_esx --with-esx
%else
    %define arg_esx --without-esx
%endif

%if %{with_hyperv}
    %define arg_hyperv --with-hyperv
%else
    %define arg_hyperv --without-hyperv
%endif

%if %{with_vmware}
    %define arg_vmware --with-vmware
%else
    %define arg_vmware --without-vmware
%endif

%if %{with_storage_rbd}
    %define arg_storage_rbd --with-storage-rbd
%else
    %define arg_storage_rbd --without-storage-rbd
%endif

%if %{with_storage_sheepdog}
    %define arg_storage_sheepdog --with-storage-sheepdog
%else
    %define arg_storage_sheepdog --without-storage-sheepdog
%endif

%if %{with_storage_gluster}
    %define arg_storage_gluster --with-storage-gluster
%else
    %define arg_storage_gluster --without-storage-gluster
%endif

%if %{with_storage_zfs}
    %define arg_storage_zfs --with-storage-zfs
%else
    %define arg_storage_zfs --without-storage-zfs
%endif

%if %{with_numactl}
    %define arg_numactl --with-numactl
%else
    %define arg_numactl --without-numactl
%endif

%if %{with_numad}
    %define arg_numad --with-numad
%else
    %define arg_numad --without-numad
%endif

%if %{with_fuse}
    %define arg_fuse --with-fuse
%else
    %define arg_fuse --without-fuse
%endif

%if %{with_sanlock}
    %define arg_sanlock --with-sanlock
%else
    %define arg_sanlock --without-sanlock
%endif

%if %{with_firewalld}
    %define arg_firewalld --with-firewalld
%else
    %define arg_firewalld --without-firewalld
%endif

%if %{with_firewalld_zone}
    %define arg_firewalld_zone --with-firewalld-zone
%else
    %define arg_firewalld_zone --without-firewalld-zone
%endif

%if %{with_wireshark}
    %define arg_wireshark --with-wireshark-dissector
%else
    %define arg_wireshark --without-wireshark-dissector
%endif

%if %{with_storage_iscsi_direct}
    %define arg_storage_iscsi_direct --with-storage-iscsi-direct
%else
    %define arg_storage_iscsi_direct --without-storage-iscsi-direct
%endif

%define when  %(date +"%%F-%%T")
%define where %(hostname)
%define who   %{?packager}%{!?packager:Unknown}
%define arg_packager --with-packager="%{who}, %{when}, %{where}"
%define arg_packager_version --with-packager-version="%{release}"

%define arg_selinux_mount --with-selinux-mount="/sys/fs/selinux"

%if 0%{?fedora}
    # Nightly edk2.git-ovmf-x64
    LOADERS="/usr/share/edk2.git/ovmf-x64/OVMF_CODE-pure-efi.fd:/usr/share/edk2.git/ovmf-x64/OVMF_VARS-pure-efi.fd"
    # Nightly edk2.git-ovmf-ia32
    LOADERS="$LOADERS:/usr/share/edk2.git/ovmf-ia32/OVMF_CODE-pure-efi.fd:/usr/share/edk2.git/ovmf-ia32/OVMF_VARS-pure-efi.fd"
    # Nightly edk2.git-aarch64
    LOADERS="$LOADERS:/usr/share/edk2.git/aarch64/QEMU_EFI-pflash.raw:/usr/share/edk2.git/aarch64/vars-template-pflash.raw"
    # Nightly edk2.git-arm
    LOADERS="$LOADERS:/usr/share/edk2.git/arm/QEMU_EFI-pflash.raw:/usr/share/edk2.git/arm/vars-template-pflash.raw"

    # Fedora edk2-ovmf
    LOADERS="$LOADERS:/usr/share/edk2/ovmf/OVMF_CODE.fd:/usr/share/edk2/ovmf/OVMF_VARS.fd"
    # Fedora edk2-ovmf-ia32
    LOADERS="$LOADERS:/usr/share/edk2/ovmf-ia32/OVMF_CODE.fd:/usr/share/edk2/ovmf-ia32/OVMF_VARS.fd"
    # Fedora edk2-aarch64
    LOADERS="$LOADERS:/usr/share/edk2/aarch64/QEMU_EFI-pflash.raw:/usr/share/edk2/aarch64/vars-template-pflash.raw"
    # Fedora edk2-arm
    LOADERS="$LOADERS:/usr/share/edk2/arm/QEMU_EFI-pflash.raw:/usr/share/edk2/arm/vars-template-pflash.raw"
    %define arg_loader_nvram --with-loader-nvram="$LOADERS"
%endif

# place macros above and build commands below this comment

export SOURCE_DATE_EPOCH=$(stat --printf='%Y' %{_specdir}/%{name}.spec)

%if 0%{?enable_autotools}
 autoreconf -if
%endif

rm -f po/stamp-po
%configure %{?arg_qemu} \
           %{?arg_openvz} \
           %{?arg_lxc} \
           %{?arg_vbox} \
           %{?arg_libxl} \
           --with-sasl \
           --with-polkit \
           --with-libvirtd \
           %{?arg_phyp} \
           %{?arg_esx} \
           %{?arg_hyperv} \
           %{?arg_vmware} \
           --without-xenapi \
           --without-vz \
           --without-bhyve \
           --with-interface \
           --with-network \
           --with-storage-fs \
           --with-storage-lvm \
           --with-storage-iscsi \
           %{?arg_storage_iscsi_direct} \
           --with-storage-scsi \
           --with-storage-disk \
           --with-storage-mpath \
           %{?arg_storage_rbd} \
           %{?arg_storage_sheepdog} \
           %{?arg_storage_gluster} \
           %{?arg_storage_zfs} \
           --without-storage-vstorage \
           %{?arg_numactl} \
           %{?arg_numad} \
           --with-capng \
           %{?arg_fuse} \
           --with-netcf \
           --with-selinux \
           %{?arg_selinux_mount} \
           --without-apparmor \
           --without-hal \
           --with-udev \
           --with-yajl \
           %{?arg_sanlock} \
           --with-libpcap \
           --with-macvtap \
           --with-audit \
           --with-dtrace \
           --with-driver-modules \
           %{?arg_firewalld} \
           %{?arg_firewalld_zone} \
           %{?arg_wireshark} \
           --without-pm-utils \
           --with-nss-plugin \
           %{arg_packager} \
           %{arg_packager_version} \
           --with-qemu-user=%{qemu_user} \
           --with-qemu-group=%{qemu_group} \
           --with-tls-priority=%{tls_priority} \
           %{?arg_loader_nvram} \
           %{?enable_werror} \
           --enable-expensive-tests \
           --with-init-script=systemd \
           %{?arg_login_shell}
make %{?_smp_mflags} V=1
gzip -9 ChangeLog

%install
rm -fr %{buildroot}

export SOURCE_DATE_EPOCH=$(stat --printf='%Y' %{_specdir}/%{name}.spec)

%make_install %{?_smp_mflags} SYSTEMD_UNIT_DIR=%{_unitdir} V=1

rm -f $RPM_BUILD_ROOT%{_libdir}/*.la
rm -f $RPM_BUILD_ROOT%{_libdir}/*.a
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.la
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.a
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.la
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.a
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-backend/*.la
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-backend/*.a
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-file/*.la
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-file/*.a
%if %{with_wireshark}
rm -f $RPM_BUILD_ROOT%{wireshark_plugindir}/libvirt.la
%endif

install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/lib/libvirt/dnsmasq/
# We don't want to install /etc/libvirt/qemu/networks in the main %files list
# because if the admin wants to delete the default network completely, we don't
# want to end up re-incarnating it on every RPM upgrade.
install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/
cp $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml \
   $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml
# libvirt saves this file with mode 0600
chmod 0600 $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml

# nwfilter files are installed in /usr/share/libvirt and copied to /etc in %post
# to avoid verification errors on changed files in /etc
install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/nwfilter/
cp -a $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/nwfilter/*.xml \
    $RPM_BUILD_ROOT%{_datadir}/libvirt/nwfilter/
# libvirt saves these files with mode 600
chmod 600 $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/nwfilter/*.xml

# Strip auto-generated UUID - we need it generated per-install
sed -i -e "/<uuid>/d" $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml
%if ! %{with_qemu}
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_qemu.aug
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
%endif
%find_lang %{name}

%if ! %{with_sanlock}
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirt_sanlock.aug
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug
%endif

%if ! %{with_lxc}
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_lxc.aug
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
%endif

%if ! %{with_qemu}
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu.conf
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.qemu
%endif
%if ! %{with_lxc}
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/lxc.conf
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.lxc
%endif
%if ! %{with_libxl}
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/libxl.conf
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.libxl
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_libxl.aug
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_libxl.aug
%endif

# Copied into libvirt-docs subpackage eventually
mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt libvirt-docs

%ifarch %{power64} s390x x86_64 ia64 alpha sparc64
mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes.stp \
   $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes-64.stp

    %if %{with_qemu}
mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes.stp \
   $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes-64.stp
    %endif
%endif

%check
cd tests
# These tests don't current work in a mock build root
for i in nodeinfotest seclabeltest
do
  rm -f $i
  printf 'int main(void) { return 0; }' > $i.c
  printf '#!/bin/sh\nexit 0\n' > $i
  chmod +x $i
done
if ! make %{?_smp_mflags} check VIR_TEST_DEBUG=1
then
  cat test-suite.log || true
  exit 1
fi

%post libs
%if 0%{?rhel} == 7
/sbin/ldconfig
%endif

%postun libs
%if 0%{?rhel} == 7
/sbin/ldconfig
%endif

%pre daemon
# 'libvirt' group is just to allow password-less polkit access to
# libvirtd. The uid number is irrelevant, so we use dynamic allocation
# described at the above link.
getent group libvirt >/dev/null || groupadd -r libvirt

exit 0

%post daemon

%systemd_post virtlockd.socket virtlockd-admin.socket
%systemd_post virtlogd.socket virtlogd-admin.socket
%systemd_post libvirtd.socket libvirtd-ro.socket libvirtd-admin.socket
%systemd_post libvirtd-tcp.socket libvirtd-tls.socket
%systemd_post libvirtd.service

# request daemon restart in posttrans
mkdir -p %{_localstatedir}/lib/rpm-state/libvirt || :
touch %{_localstatedir}/lib/rpm-state/libvirt/restart || :

%preun daemon
%systemd_preun libvirtd.service
%systemd_preun libvirtd-tcp.socket libvirtd-tls.socket
%systemd_preun libvirtd.socket libvirtd-ro.socket libvirtd-admin.socket
%systemd_preun virtlogd.socket virtlogd-admin.socket virtlogd.service
%systemd_preun virtlockd.socket virtlockd-admin.socket virtlockd.service

%postun daemon
/bin/systemctl daemon-reload >/dev/null 2>&1 || :
if [ $1 -ge 1 ] ; then
    /bin/systemctl reload-or-try-restart virtlockd.service >/dev/null 2>&1 || :
    /bin/systemctl reload-or-try-restart virtlogd.service >/dev/null 2>&1 || :
fi

# In upgrade scenario we must explicitly enable virtlockd/virtlogd
# sockets, if libvirtd is already enabled and start them if
# libvirtd is running, otherwise you'll get failures to start
# guests
%triggerpostun daemon -- libvirt-daemon < 1.3.0
if [ $1 -ge 1 ] ; then
    /bin/systemctl is-enabled libvirtd.service 1>/dev/null 2>&1 &&
        /bin/systemctl enable virtlogd.socket virtlogd-admin.socket || :
    /bin/systemctl is-active libvirtd.service 1>/dev/null 2>&1 &&
        /bin/systemctl start virtlogd.socket virtlogd-admin.socket || :
fi

%posttrans daemon
if [ -f %{_localstatedir}/lib/rpm-state/libvirt/restart ]; then
    # See if user has previously modified their install to
    # tell libvirtd to use --listen
    grep -E '^LIBVIRTD_ARGS=.*--listen' /etc/sysconfig/libvirtd 1>/dev/null 2>&1
    if test $? = 0
    then
        # Then lets keep honouring --listen and *not* use
        # systemd socket activation, because switching things
        # might confuse mgmt tool like puppet/ansible that
        # expect the old style libvirtd
        /bin/systemctl mask libvirtd.socket >/dev/null 2>&1 || :
        /bin/systemctl mask libvirtd-ro.socket >/dev/null 2>&1 || :
        /bin/systemctl mask libvirtd-admin.socket >/dev/null 2>&1 || :
        /bin/systemctl mask libvirtd-tls.socket >/dev/null 2>&1 || :
        /bin/systemctl mask libvirtd-tcp.socket >/dev/null 2>&1 || :
    else
        # Old libvirtd owns the sockets and will delete them on
        # shutdown. Can't use a try-restart as libvirtd will simply
        # own the sockets again when it comes back up. Thus we must
        # do this particular ordering, so that we get libvirtd
        # running with socket activation in use
        /bin/systemctl is-active libvirtd.service 1>/dev/null 2>&1
        if test $? = 0
        then
            /bin/systemctl stop libvirtd.service >/dev/null 2>&1 || :

            /bin/systemctl try-restart libvirtd.socket >/dev/null 2>&1 || :
            /bin/systemctl try-restart libvirtd-ro.socket >/dev/null 2>&1 || :
            /bin/systemctl try-restart libvirtd-admin.socket >/dev/null 2>&1 || :

            /bin/systemctl start libvirtd.service >/dev/null 2>&1 || :
        fi
    fi
fi
rm -rf %{_localstatedir}/lib/rpm-state/libvirt || :

%post daemon-driver-network
%if %{with_firewalld_zone}
    %firewalld_reload
%endif

%postun daemon-driver-network
%if %{with_firewalld_zone}
    %firewalld_reload
%endif

%post daemon-config-network
if test $1 -eq 1 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ; then
    # see if the network used by default network creates a conflict,
    # and try to resolve it
    # NB: 192.168.122.0/24 is used in the default.xml template file;
    # do not modify any of those values here without also modifying
    # them in the template.
    orig_sub=122
    sub=${orig_sub}
    nl='
'
    routes="${nl}$(ip route show | cut -d' ' -f1)${nl}"
    case ${routes} in
      *"${nl}192.168.${orig_sub}.0/24${nl}"*)
        # there was a match, so we need to look for an unused subnet
        for new_sub in $(seq 124 254); do
          case ${routes} in
          *"${nl}192.168.${new_sub}.0/24${nl}"*)
            ;;
          *)
            sub=$new_sub
            break;
            ;;
          esac
        done
        ;;
      *)
        ;;
    esac

    UUID=`/usr/bin/uuidgen`
    sed -e "s/${orig_sub}/${sub}/g" \
        -e "s,</name>,</name>\n  <uuid>$UUID</uuid>," \
         < %{_datadir}/libvirt/networks/default.xml \
         > %{_sysconfdir}/libvirt/qemu/networks/default.xml
    ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
    # libvirt saves this file with mode 0600
    chmod 0600 %{_sysconfdir}/libvirt/qemu/networks/default.xml

    # Make sure libvirt picks up the new network defininiton
    mkdir -p %{_localstatedir}/lib/rpm-state/libvirt || :
    touch %{_localstatedir}/lib/rpm-state/libvirt/restart || :
fi

%posttrans daemon-config-network
if [ -f %{_localstatedir}/lib/rpm-state/libvirt/restart ]; then
    /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || :
fi
rm -rf %{_localstatedir}/lib/rpm-state/libvirt || :

%post daemon-config-nwfilter
cp %{_datadir}/libvirt/nwfilter/*.xml %{_sysconfdir}/libvirt/nwfilter/
# libvirt saves these files with mode 600
chmod 600 %{_sysconfdir}/libvirt/nwfilter/*.xml
# Make sure libvirt picks up the new nwfilter defininitons
mkdir -p %{_localstatedir}/lib/rpm-state/libvirt || :
touch %{_localstatedir}/lib/rpm-state/libvirt/restart || :

%posttrans daemon-config-nwfilter
if [ -f %{_localstatedir}/lib/rpm-state/libvirt/restart ]; then
    /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || :
fi
rm -rf %{_localstatedir}/lib/rpm-state/libvirt || :


%if %{with_qemu}
%pre daemon-driver-qemu
# We want soft static allocation of well-known ids, as disk images
# are commonly shared across NFS mounts by id rather than name; see
# https://fedoraproject.org/wiki/Packaging:UsersAndGroups
getent group kvm >/dev/null || groupadd -f -g 36 -r kvm
getent group qemu >/dev/null || groupadd -f -g 107 -r qemu
if ! getent passwd qemu >/dev/null; then
  if ! getent passwd 107 >/dev/null; then
    useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu
  else
    useradd -r -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu
  fi
fi
exit 0
%endif

%preun client

%systemd_preun libvirt-guests.service

%post client
%systemd_post libvirt-guests.service

%postun client
%systemd_postun libvirt-guests.service

%if %{with_lxc}
%pre login-shell
getent group virtlogin >/dev/null || groupadd -r virtlogin
exit 0
%endif

%files

%files docs
%doc AUTHORS ChangeLog.gz NEWS README README.md
%doc libvirt-docs/*

# API docs
%dir %{_datadir}/gtk-doc/html/libvirt/
%doc %{_datadir}/gtk-doc/html/libvirt/*.devhelp
%doc %{_datadir}/gtk-doc/html/libvirt/*.html
%doc %{_datadir}/gtk-doc/html/libvirt/*.png
%doc %{_datadir}/gtk-doc/html/libvirt/*.css


%files daemon

%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/

%{_unitdir}/libvirtd.service
%{_unitdir}/libvirtd.socket
%{_unitdir}/libvirtd-ro.socket
%{_unitdir}/libvirtd-admin.socket
%{_unitdir}/libvirtd-tcp.socket
%{_unitdir}/libvirtd-tls.socket
%{_unitdir}/virt-guest-shutdown.target
%{_unitdir}/virtlogd.service
%{_unitdir}/virtlogd.socket
%{_unitdir}/virtlogd-admin.socket
%{_unitdir}/virtlockd.service
%{_unitdir}/virtlockd.socket
%{_unitdir}/virtlockd-admin.socket
%config(noreplace) %{_sysconfdir}/sysconfig/libvirtd
%config(noreplace) %{_sysconfdir}/sysconfig/virtlogd
%config(noreplace) %{_sysconfdir}/sysconfig/virtlockd
%config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf
%config(noreplace) %{_sysconfdir}/libvirt/virtlogd.conf
%config(noreplace) %{_sysconfdir}/libvirt/virtlockd.conf
%config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf
%config(noreplace) %{_prefix}/lib/sysctl.d/60-libvirtd.conf

%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd
%dir %{_datadir}/libvirt/

%ghost %dir %{_localstatedir}/run/libvirt/

%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/images/
%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/filesystems/
%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/boot/
%dir %attr(0711, root, root) %{_localstatedir}/cache/libvirt/


%dir %attr(0755, root, root) %{_libdir}/libvirt/
%dir %attr(0755, root, root) %{_libdir}/libvirt/connection-driver/
%dir %attr(0755, root, root) %{_libdir}/libvirt/lock-driver
%attr(0755, root, root) %{_libdir}/libvirt/lock-driver/lockd.so

%{_datadir}/augeas/lenses/libvirtd.aug
%{_datadir}/augeas/lenses/tests/test_libvirtd.aug
%{_datadir}/augeas/lenses/virtlogd.aug
%{_datadir}/augeas/lenses/tests/test_virtlogd.aug
%{_datadir}/augeas/lenses/virtlockd.aug
%{_datadir}/augeas/lenses/tests/test_virtlockd.aug
%{_datadir}/augeas/lenses/libvirt_lockd.aug
%if %{with_qemu}
%{_datadir}/augeas/lenses/tests/test_libvirt_lockd.aug
%endif

%{_datadir}/polkit-1/actions/org.libvirt.unix.policy
%{_datadir}/polkit-1/actions/org.libvirt.api.policy
%{_datadir}/polkit-1/rules.d/50-libvirt.rules

%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/

%attr(0755, root, root) %{_libexecdir}/libvirt_iohelper

%attr(0755, root, root) %{_sbindir}/libvirtd
%attr(0755, root, root) %{_sbindir}/virtlogd
%attr(0755, root, root) %{_sbindir}/virtlockd

%{_mandir}/man8/libvirtd.8*
%{_mandir}/man8/virtlogd.8*
%{_mandir}/man8/virtlockd.8*
%{_mandir}/man7/virkey*.7*

%files daemon-config-network
%dir %{_datadir}/libvirt/networks/
%{_datadir}/libvirt/networks/default.xml
%ghost %{_sysconfdir}/libvirt/qemu/networks/default.xml
%ghost %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml

%files daemon-config-nwfilter
%dir %{_datadir}/libvirt/nwfilter/
%{_datadir}/libvirt/nwfilter/*.xml
%ghost %{_sysconfdir}/libvirt/nwfilter/*.xml

%files daemon-driver-interface
%{_libdir}/%{name}/connection-driver/libvirt_driver_interface.so

%files daemon-driver-network
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart
%ghost %dir %{_localstatedir}/run/libvirt/network/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/
%dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/
%attr(0755, root, root) %{_libexecdir}/libvirt_leaseshelper
%{_libdir}/%{name}/connection-driver/libvirt_driver_network.so

%if %{with_firewalld_zone}
%{_prefix}/lib/firewalld/zones/libvirt.xml
%endif

%files daemon-driver-nodedev
%{_libdir}/%{name}/connection-driver/libvirt_driver_nodedev.so

%files daemon-driver-nwfilter
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/
%ghost %dir %{_localstatedir}/run/libvirt/network/
%{_libdir}/%{name}/connection-driver/libvirt_driver_nwfilter.so

%files daemon-driver-secret
%{_libdir}/%{name}/connection-driver/libvirt_driver_secret.so

%files daemon-driver-storage

%files daemon-driver-storage-core
%attr(0755, root, root) %{_libexecdir}/libvirt_parthelper
%{_libdir}/%{name}/connection-driver/libvirt_driver_storage.so
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_fs.so
%{_libdir}/%{name}/storage-file/libvirt_storage_file_fs.so

%files daemon-driver-storage-disk
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_disk.so

%files daemon-driver-storage-logical
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_logical.so

%files daemon-driver-storage-scsi
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_scsi.so

%files daemon-driver-storage-iscsi
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_iscsi.so

%if %{with_storage_iscsi_direct}
%files daemon-driver-storage-iscsi-direct
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_iscsi-direct.so
%endif

%files daemon-driver-storage-mpath
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_mpath.so

%if %{with_storage_gluster}
%files daemon-driver-storage-gluster
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_gluster.so
%{_libdir}/%{name}/storage-file/libvirt_storage_file_gluster.so
%endif

%if %{with_storage_rbd}
%files daemon-driver-storage-rbd
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_rbd.so
%endif

%if %{with_storage_sheepdog}
%files daemon-driver-storage-sheepdog
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_sheepdog.so
%endif

%if %{with_storage_zfs}
%files daemon-driver-storage-zfs
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_zfs.so
%endif

%if %{with_qemu}
%files daemon-driver-qemu
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/
%config(noreplace) %{_sysconfdir}/libvirt/qemu.conf
%config(noreplace) %{_sysconfdir}/libvirt/qemu-lockd.conf
%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.qemu
%ghost %dir %{_localstatedir}/run/libvirt/qemu/
%dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/
%dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/cache/libvirt/qemu/
%{_datadir}/augeas/lenses/libvirtd_qemu.aug
%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
%{_libdir}/%{name}/connection-driver/libvirt_driver_qemu.so
%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/swtpm/
%dir %attr(0711, root, root) %{_localstatedir}/log/swtpm/libvirt/qemu/
%endif

%if %{with_lxc}
%files daemon-driver-lxc
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/
%config(noreplace) %{_sysconfdir}/libvirt/lxc.conf
%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.lxc
%ghost %dir %{_localstatedir}/run/libvirt/lxc/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/
%{_datadir}/augeas/lenses/libvirtd_lxc.aug
%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
%attr(0755, root, root) %{_libexecdir}/libvirt_lxc
%{_libdir}/%{name}/connection-driver/libvirt_driver_lxc.so
%endif

%if %{with_libxl}
%files daemon-driver-libxl
%config(noreplace) %{_sysconfdir}/libvirt/libxl.conf
%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.libxl
%config(noreplace) %{_sysconfdir}/libvirt/libxl-lockd.conf
%{_datadir}/augeas/lenses/libvirtd_libxl.aug
%{_datadir}/augeas/lenses/tests/test_libvirtd_libxl.aug
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/libxl/
%ghost %dir %{_localstatedir}/run/libvirt/libxl/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/
%{_libdir}/%{name}/connection-driver/libvirt_driver_libxl.so
%endif

%if %{with_vbox}
%files daemon-driver-vbox
%{_libdir}/%{name}/connection-driver/libvirt_driver_vbox.so
%endif

%if %{with_qemu_tcg}
%files daemon-qemu
%endif

%if %{with_qemu_kvm}
%files daemon-kvm
%endif

%if %{with_lxc}
%files daemon-lxc
%endif

%if %{with_libxl}
%files daemon-xen
%endif

%if %{with_vbox}
%files daemon-vbox
%endif

%if %{with_sanlock}
%files lock-sanlock
    %if %{with_qemu}
%config(noreplace) %{_sysconfdir}/libvirt/qemu-sanlock.conf
    %endif
    %if %{with_libxl}
%config(noreplace) %{_sysconfdir}/libvirt/libxl-sanlock.conf
    %endif
%attr(0755, root, root) %{_libdir}/libvirt/lock-driver/sanlock.so
%{_datadir}/augeas/lenses/libvirt_sanlock.aug
%{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug
%dir %attr(0770, root, sanlock) %{_localstatedir}/lib/libvirt/sanlock
%{_sbindir}/virt-sanlock-cleanup
%{_mandir}/man8/virt-sanlock-cleanup.8*
%attr(0755, root, root) %{_libexecdir}/libvirt_sanlock_helper
%endif

%files client
%{_mandir}/man1/virsh.1*
%{_mandir}/man1/virt-xml-validate.1*
%{_mandir}/man1/virt-pki-validate.1*
%{_mandir}/man1/virt-host-validate.1*
%{_bindir}/virsh
%{_bindir}/virt-xml-validate
%{_bindir}/virt-pki-validate
%{_bindir}/virt-host-validate

%{_datadir}/systemtap/tapset/libvirt_probes*.stp
%{_datadir}/systemtap/tapset/libvirt_functions.stp
%if %{with_qemu}
%{_datadir}/systemtap/tapset/libvirt_qemu_probes*.stp
%endif

%if %{with_bash_completion}
%{_datadir}/bash-completion/completions/virsh
%endif


%{_unitdir}/libvirt-guests.service
%config(noreplace) %{_sysconfdir}/sysconfig/libvirt-guests
%attr(0755, root, root) %{_libexecdir}/libvirt-guests.sh

%files libs -f %{name}.lang
%license COPYING COPYING.LESSER
%config(noreplace) %{_sysconfdir}/libvirt/libvirt.conf
%config(noreplace) %{_sysconfdir}/libvirt/libvirt-admin.conf
%{_libdir}/libvirt.so.*
%{_libdir}/libvirt-qemu.so.*
%{_libdir}/libvirt-lxc.so.*
%{_libdir}/libvirt-admin.so.*
%dir %{_datadir}/libvirt/
%dir %{_datadir}/libvirt/schemas/
%dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/

%{_datadir}/libvirt/schemas/basictypes.rng
%{_datadir}/libvirt/schemas/capability.rng
%{_datadir}/libvirt/schemas/cputypes.rng
%{_datadir}/libvirt/schemas/domain.rng
%{_datadir}/libvirt/schemas/domaincaps.rng
%{_datadir}/libvirt/schemas/domaincheckpoint.rng
%{_datadir}/libvirt/schemas/domaincommon.rng
%{_datadir}/libvirt/schemas/domainsnapshot.rng
%{_datadir}/libvirt/schemas/interface.rng
%{_datadir}/libvirt/schemas/network.rng
%{_datadir}/libvirt/schemas/networkcommon.rng
%{_datadir}/libvirt/schemas/networkport.rng
%{_datadir}/libvirt/schemas/nodedev.rng
%{_datadir}/libvirt/schemas/nwfilter.rng
%{_datadir}/libvirt/schemas/nwfilter_params.rng
%{_datadir}/libvirt/schemas/nwfilterbinding.rng
%{_datadir}/libvirt/schemas/secret.rng
%{_datadir}/libvirt/schemas/storagecommon.rng
%{_datadir}/libvirt/schemas/storagepool.rng
%{_datadir}/libvirt/schemas/storagepoolcaps.rng
%{_datadir}/libvirt/schemas/storagevol.rng

%{_datadir}/libvirt/cpu_map/*.xml

%{_datadir}/libvirt/test-screenshot.png

%files admin
%{_mandir}/man1/virt-admin.1*
%{_bindir}/virt-admin
%if %{with_bash_completion}
%{_datadir}/bash-completion/completions/virt-admin
%endif

%if %{with_bash_completion}
%files bash-completion
%{_datadir}/bash-completion/completions/vsh
%endif

%if %{with_wireshark}
%files wireshark
%{wireshark_plugindir}/libvirt.so
%endif

%files nss
%{_libdir}/libnss_libvirt.so.2
%{_libdir}/libnss_libvirt_guest.so.2

%if %{with_lxc}
%files login-shell
%attr(4750, root, virtlogin) %{_bindir}/virt-login-shell
%config(noreplace) %{_sysconfdir}/libvirt/virt-login-shell.conf
%{_mandir}/man1/virt-login-shell.1*
%endif

%files devel
%{_libdir}/libvirt.so
%{_libdir}/libvirt-admin.so
%{_libdir}/libvirt-qemu.so
%{_libdir}/libvirt-lxc.so
%dir %{_includedir}/libvirt
%{_includedir}/libvirt/virterror.h
%{_includedir}/libvirt/libvirt.h
%{_includedir}/libvirt/libvirt-admin.h
%{_includedir}/libvirt/libvirt-common.h
%{_includedir}/libvirt/libvirt-domain.h
%{_includedir}/libvirt/libvirt-domain-checkpoint.h
%{_includedir}/libvirt/libvirt-domain-snapshot.h
%{_includedir}/libvirt/libvirt-event.h
%{_includedir}/libvirt/libvirt-host.h
%{_includedir}/libvirt/libvirt-interface.h
%{_includedir}/libvirt/libvirt-network.h
%{_includedir}/libvirt/libvirt-nodedev.h
%{_includedir}/libvirt/libvirt-nwfilter.h
%{_includedir}/libvirt/libvirt-secret.h
%{_includedir}/libvirt/libvirt-storage.h
%{_includedir}/libvirt/libvirt-stream.h
%{_includedir}/libvirt/libvirt-qemu.h
%{_includedir}/libvirt/libvirt-lxc.h
%{_libdir}/pkgconfig/libvirt.pc
%{_libdir}/pkgconfig/libvirt-admin.pc
%{_libdir}/pkgconfig/libvirt-qemu.pc
%{_libdir}/pkgconfig/libvirt-lxc.pc

%dir %{_datadir}/libvirt/api/
%{_datadir}/libvirt/api/libvirt-api.xml
%{_datadir}/libvirt/api/libvirt-admin-api.xml
%{_datadir}/libvirt/api/libvirt-qemu-api.xml
%{_datadir}/libvirt/api/libvirt-lxc-api.xml


%changelog
* Mon Dec  9 2019 Jiri Denemark <jdenemar@redhat.com> - 5.6.0-10
- util: introduce virPCIDeviceConfigOpenInternal (rhbz#1758330)
- util: Introduce virPCIDeviceConfigOpenWrite (rhbz#1758330)
- util: introduce readonly attribute to virPCIDeviceConfigOpenInternal (rhbz#1758330)
- util: introduce virPCIDeviceConfigOpenTry (rhbz#1758330)
- util: default to read-only in virPCIDeviceConfigOpen (rhbz#1758330)
- virpcimock: Mock __open_2() (rhbz#1758330)
- tests: virpcimock: Always declare __open_2 (rhbz#1758330)
- qemu: Add support for setting string migration params (rhbz#1754533)
- Introduce VIR_MIGRATE_PARAM_TLS_DESTINATION migration param (rhbz#1754533)
- qemu: Implement VIR_MIGRATE_PARAM_TLS_DESTINATION (rhbz#1754533)
- virsh: Add --tls-destination option for migrate command (rhbz#1754533)

* Thu Nov 28 2019 Jiri Denemark <jdenemar@redhat.com> - 5.6.0-9
- qemu: Separate image metadata removal into a function (rhbz#1741456)
- qemuProcessStop: Remove image metadata for running mirror jobs (rhbz#1741456)
- qemu: fix EFI nvram removal on domain undefine (rhbz#1751596)

* Thu Nov 21 2019 Jiri Denemark <jdenemar@redhat.com> - 5.6.0-8
- qemu: avoid double reservation of PCI address for interface type='hostdev' (rhbz#1744523)
- domain_conf: Make virDomainDeviceFindSCSIController accept virDomainDeviceDriveAddress struct (rhbz#1744079)
- domain_conf: Relax SCSI addr used check (rhbz#1744079)
- cpu_conf: Pass policy to CPU feature filtering callbacks (rhbz#1756157)
- qemuxml2*test: Add tests for Icelake-Server, -pconfig (rhbz#1756157)
- qemu: Drop disabled CPU features unknown to QEMU (rhbz#1756157)
- cputest: Add data for Ice Lake Server CPU (rhbz#1756157)
- cpu_map: Drop pconfig from Icelake-Server CPU model (rhbz#1756157)
- qemu: Fix NULL ptr dereference caused by qemuDomainDefFormatBufInternal (rhbz#1756157)

* Mon Oct 21 2019 Jiri Denemark <jdenemar@redhat.com> - 5.6.0-7
- qemu_blockjob: Remove secdriver metadata for whole backing chain on job completion (rhbz#1741456)
- qemu_driver: Fix comment of qemuStateCleanup() (rhbz#1755303)
- driver: Introduce virDriverShouldAutostart() (rhbz#1755303)
- lib: autostart objects exactly once (rhbz#1755303)
- Revert "src: Document autostart for session demon" (rhbz#1755303)
- security: Pass @migrated to virSecurityManagerSetAllLabel (rhbz#1740024)
- security: Rename virSecurityManagerGetDriver() to virSecurityManagerGetVirtDriver() (rhbz#1740024)
- security: Introduce virSecurityManagerGetDriver() (rhbz#1740024)
- security_stack: Turn list of nested drivers into a doubly linked list (rhbz#1740024)
- security_stack: Perform rollback if one of stacked drivers fails (rhbz#1740024)
- util: new function virNetDevMacVLanIsMacvtap() (rhbz#1723367)
- util: make a couple virNetDevMacVlan*() functions public (rhbz#1723367)
- qemu: reorganize qemuInterfaceEthernetConnect() (rhbz#1723367)
- conf: use virXMLFormatElement for interface <target> (rhbz#1723367)
- conf: new "managed" attribute for target dev of <interface type='ethernet'> (rhbz#1723367)
- qemu: support unmanaged target tap dev for <interface type='ethernet'> (rhbz#1723367)
- qemu: support unmanaged macvtap devices with <interface type='ethernet'> (rhbz#1723367)

* Thu Sep 19 2019 Jiri Denemark <jdenemar@redhat.com> - 5.6.0-6
- remote: fix registration of TLS socket (rhbz#1752837)

* Mon Sep 16 2019 Jiri Denemark <jdenemar@redhat.com> - 5.6.0-5
- vircgroupv2: fix setting cpu.max period (rhbz#1749247)

* Wed Sep  4 2019 Jiri Denemark <jdenemar@redhat.com> - 5.6.0-4
- src: security: Replace bitwise OR with logical OR (rhbz#1740024)
- security_util: Use more VIR_AUTOFREE() (rhbz#1740024)
- security_util: Document virSecurityMoveRememberedLabel (rhbz#1740024)
- security: Don't increase XATTRs refcounter on failure (rhbz#1740024)
- util: Introduce virhostuptime (rhbz#1741140)
- security_util: Remove stale XATTRs (rhbz#1741140)
- security_util: verify xattrs only if ref is present (rhbz#1741140)
- virSecuritySELinuxSetFileconImpl: Drop @optional argument (rhbz#1740506)
- security_selinux: Drop virSecuritySELinuxSetFileconOptional() (rhbz#1740506)
- security_selinux: Drop @optional from _virSecuritySELinuxContextItem (rhbz#1740506)
- security_selinux: Drop virSecuritySELinuxSetFileconHelper (rhbz#1740506)
- security_selinux: Play nicely with network FS that only emulates SELinux (rhbz#1740506)
- qemu_blockjob: Print image path on failed security metadata move too (rhbz#1741456)
- qemu_blockjob: Remove secdriver metadata more frequently (rhbz#1741456)
- vircgroupv2: fix abort in VIR_AUTOFREE (rhbz#1747482)

* Fri Aug 30 2019 Jiri Denemark <jdenemar@redhat.com> - 5.6.0-3
- vircgroupv2: fix parsing multiple values in single file (rhbz#1734353)
- vircgroupv2: fix virCgroupV2GetCpuCfsQuota for "max" value (rhbz#1735740)
- network: fix ability to use openvswitch with vlans (rhbz#1739554)
- remote: use Wants instead of Requires for libvirtd sockets (rhbz#1741403)
- remote: move timeout arg into sysconf file (rhbz#1741403)
- remote: forbid the --listen arg when systemd socket activation (rhbz#1741403)
- rpm: don't enable socket activation in upgrade if --listen present (rhbz#1741403)
- qemuBuildHotpluggableCPUProps: use VIR_RETURN_PTR (rhbz#1741658)
- qemu: Extract and store vCPU properties as qemu returned them (rhbz#1741658)
- qemu: command: Use all vCPU properties when creating args for vCPU hotplug (rhbz#1741658)
- qemu: alias: Generate 'qomName' of disk with useraliases (rhbz#1741838)

* Mon Aug 19 2019 Jiri Denemark <jdenemar@redhat.com> - 5.6.0-2
- Revert "tpm: Check TPM XML device configuration changes after edit" (rhbz#1739338)
- qemu: Clarify error message in qemuMigrationSrcIsSafe (rhbz#1660575)
- qemu: Check for drop-cache capability (rhbz#1660575)
- qemu: Allow migration with disk cache on (rhbz#1660575)
- qemu: Pass qemuCaps to qemuDomainDefCopy (rhbz#1741796)
- qemu: Pass qemuCaps to qemuDomainDefFormatBufInternal (rhbz#1741796)
- qemu: Pass qemuCaps to qemuDomainSaveImageOpen (rhbz#1741796)
- qemu: Pass qemuCaps to qemuMigrationAnyPrepareDef (rhbz#1741796)
- qemu: Pass correct qemuCaps to virDomainDefParseString (rhbz#1741796)
- qemu: Pass qemuCaps to qemuMigrationCookieXMLParse (rhbz#1741796)
- qemu: Pass correct qemuCaps to virDomainDefCopy (rhbz#1741796)
- qemu: Pass correct qemuCaps to virDomainDefPostParse (rhbz#1741796)
- qemu: Pass correct qemuCaps to virDomainDefParseNode (rhbz#1741796)
- qemu: Pass correct qemuCaps to virDomainDeviceDefPostParse (rhbz#1741796)
- qemu: Fix crash on incoming migration (rhbz#1741796)
- network: fix crash during cleanup from failure to allocate port (rhbz#1741390)
- network: replace virSaveLastError() with virErrorPreserveLast() (rhbz#1741390)
- access: fix incorrect addition to virAccessPermNetwork (rhbz#1741428)
- util: allow tap-based guest interfaces to have MAC address prefix 0xFE (rhbz#1743349)

* Tue Aug  6 2019 Jiri Denemark <jdenemar@redhat.com> - 5.6.0-1
- Rebased to libvirt-5.6.0 (rhbz#1705225)
- The rebase also fixes the following bugs:
    rhbz#1643404, rhbz#1721375, rhbz#1724065, rhbz#1726609, rhbz#1726643
    rhbz#1727013, rhbz#1727866, rhbz#1729022, rhbz#1731332

* Fri Jul 26 2019 Jiri Denemark <jdenemar@redhat.com> - 5.5.0-2
- vircgroup: fix cgroups v2 controllers detection (rhbz#1513930)
- vircgroupv2: store enabled controllers (rhbz#1513930)

* Wed Jul  3 2019 Jiri Denemark <jdenemar@redhat.com> - 5.5.0-1
- Rebased to libvirt-5.5.0 (rhbz#1705225)
- The rebase also fixes the following bugs:
    rhbz#1426162, rhbz#1513930, rhbz#1598657, rhbz#1717768, rhbz#1720517
    rhbz#1720519, rhbz#1720522, rhbz#1720524, rhbz#1722360, rhbz#1723633

* Thu Jun 27 2019 Pavel Hrdina <phrdina@redhat.com> - 5.4.0-2
- RHEL: spec: Disable gluster on i686 (rhbz#1724445)
- rpc: virnetlibsshsession: update deprecated functions (rhbz#1724678)

* Tue Jun  4 2019 Jiri Denemark <jdenemar@redhat.com> - 5.4.0-1
- Rebased to libvirt-5.4.0 (rhbz#1705225)
- The rebase also fixes the following bugs:
    rhbz#1580229, rhbz#1628475, rhbz#1702758, rhbz#1707708, rhbz#1716260
    rhbz#1716261, rhbz#1716262, rhbz#1716263

* Tue May  7 2019 Jiri Denemark <jdenemar@redhat.com> - 5.3.0-1
- Rebased to libvirt-5.3.0 (rhbz#1705225)
- The rebase also fixes the following bugs:
    rhbz#1578741, rhbz#1602418, rhbz#1680304, rhbz#1690240, rhbz#1292102
    rhbz#1623389, rhbz#1658504, rhbz#1689165, rhbz#1689815, rhbz#1692926
    rhbz#1217444, rhbz#1564270, rhbz#1580229, rhbz#1697676

* Fri Mar 15 2019 Jiri Denemark <jdenemar@redhat.com> - 5.0.0-7
- qemu: Set job statsType for external memory snapshot (rhbz#1688774)

* Wed Mar  6 2019 Jiri Denemark <jdenemar@redhat.com> - 5.0.0-6
- qemu: Don't set migration caps when changing postcopy bandwidth (rhbz#1336709)

* Fri Mar  1 2019 Jiri Denemark <jdenemar@redhat.com> - 5.0.0-5
- qemu: fix i6300esb watchdog hotplug on Q35 (rhbz#1666559)

* Tue Feb 26 2019 Jiri Denemark <jdenemar@redhat.com> - 5.0.0-4
- RHEL: util: fix typo in iptables --delete command (rhbz#1679119)

* Mon Feb 18 2019 Jiri Denemark <jdenemar@redhat.com> - 5.0.0-3
- vshtabletest: indent strings with expected output (rhbz#1676354)
- vsh-table: allow empty columns (rhbz#1676354)
- virsh: introduce ninfos variable in cmdDomFSInfo (rhbz#1676354)
- virsh: rename ret to rc in cmdDomFSInfo (rhbz#1676354)
- virsh: do not access uninitialized memory in cmdDomFSInfo (rhbz#1676354)
- virsh: introduce 'ret' in cmdDomFSInfo (rhbz#1676354)
- virsh: do not report error on zero filesystems in cmdDomFSInfo (rhbz#1676354)
- virsh: use virBufferTrim in cmdDomFSInfo (rhbz#1676354)
- virsh: allow empty targets in cmdDomFSInfo (rhbz#1676354)
- util: fix memory leak in virFirewallDInterfaceSetZone() (rhbz#1672340)
- internal: introduce a family of NULLSTR macros (rhbz#1662849)
- virsh: fix snapshot list --parent (rhbz#1662849)
- network: explicitly allow icmp/icmpv6 in libvirt zonefile (rhbz#1672340)

* Fri Feb  8 2019 Jiri Denemark <jdenemar@redhat.com> - 5.0.0-2
- RHEL: qemu: Fix crash trying to use iSCSI hostdev (rhbz#1669966)
- docs: Drop /dev/net/tun from the list of shared devices (rhbz#1671791)
- qemu: conf: Remove /dev/sev from the default cgroup device acl list (rhbz#1671791)
- qemu: cgroup: Expose /dev/sev/ only to domains that require SEV (rhbz#1671791)
- qemu: domain: Add /dev/sev into the domain mount namespace selectively (rhbz#1671791)
- security: dac: Relabel /dev/sev in the namespace (rhbz#1671791)
- qemu: caps: Use CAP_DAC_OVERRIDE for probing to avoid permission issues (rhbz#1671791)
- qemu: caps: Don't try to ask for CAP_DAC_OVERRIDE if non-root (rhbz#1671791)
- qemu: command: Don't skip 'readonly' and throttling info for empty drive (rhbz#1672259)
- Revert "RHEL: network: regain guest network connectivity after firewalld switch to nftables" (rhbz#1672340)
- configure: change HAVE_FIREWALLD to WITH_FIREWALLD (rhbz#1672340)
- util: move all firewalld-specific stuff into its own files (rhbz#1672340)
- util: new virFirewallD APIs + docs (rhbz#1672340)
- configure: selectively install a firewalld 'libvirt' zone (rhbz#1672340)
- network: set firewalld zone of bridges to "libvirt" zone when appropriate (rhbz#1672340)
- network: allow configuring firewalld zone for virtual network bridge device (rhbz#1672340)
- util: remove test code accidentally committed to virFirewallDZoneExists (rhbz#1672340)
- qemu: Use C99 initializers for qemuMigrationParamsTPMap (rhbz#1336709)
- qemu: Add optional unit to qemuMigrationParamsTPMapItem (rhbz#1336709)
- qemu: Rework qemuDomainMigrateSetMaxSpeed (rhbz#1336709)
- qemu: Make migration params usable outside migration (rhbz#1336709)
- Public API for post-copy migration bandwidth (rhbz#1336709)
- qemu: Implement VIR_MIGRATE_PARAM_BANDWIDTH_POSTCOPY (rhbz#1336709)
- qemu: Implement VIR_DOMAIN_MIGRATE_MAX_SPEED_POSTCOPY flag (rhbz#1336709)
- virsh: Add support for setting post-copy migration bandwidth (rhbz#1336709)

* Fri Jan 25 2019 Jiri Denemark <jdenemar@redhat.com> - 5.0.0-1
- Rebased to libvirt-5.0.0 (rhbz#1666130)
- The rebase also fixes the following bugs:
    rhbz#1597869, rhbz#1644567
- tests: qemuxml2argv: Add test case for empty CDROM with cache mode (rhbz#1668027)
- qemu: command: Don't format image properties for empty -drive (rhbz#1668027)

* Thu Dec  6 2018 Jiri Denemark <jdenemar@redhat.com> - 4.10.0-1
- Rebased to libvirt-4.10.0

* Tue Nov 20 2018 Jiri Denemark <jdenemar@redhat.com> - 4.9.0-1
- Rebased to libvirt-4.9.0
- RHEL: Fix virConnectGetMaxVcpus output (rhbz#1582222)
- RHEL: spec: Require python3-devel on RHEL-8 (rhbz#1518446)
- RHEL: network: regain guest network connectivity after firewalld switch to nftables (rhbz#1638864)

* Fri Nov  9 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-14
- storage: Remove secretPath from _virStorageBackendQemuImgInfo (rhbz#1645459)
- storage: Allow for inputvol to have any format for encryption (rhbz#1645459)
- storage: Allow inputvol to be encrypted (rhbz#1645459)
- access: Modify the VIR_ERR_ACCESS_DENIED to include driverName (rhbz#1631608)
- docs: Enhance polkit documentation to describe secondary connection (rhbz#1631608)
- qemu: Don't ignore resume events (rhbz#1634758, rhbz#1643338)

* Thu Nov  1 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-13
- Revert "spec: Temporarily drop gluster support" (rhbz#1599339)

* Wed Oct 17 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-12
- RHEL: Require firewalld-filesystem for firewalld rpm macros (rhbz#1639932)

* Tue Oct 16 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-11
- virfile: fix cast-align error (rhbz#1634782)
- virfiletest: Fix test name prefix for virFileInData test (rhbz#1634782)
- virfiletst: Test virFileIsSharedFS (rhbz#1634782)
- virFileIsSharedFSType: Detect direct mount points (rhbz#1634782)
- virfile: Rework virFileIsSharedFixFUSE (rhbz#1634782)
- RHEL: network: regain guest network connectivity after firewalld switch to nftables (rhbz#1638864)

* Mon Oct  8 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-10
- conf: Fix check for chardev source path (rhbz#1609723)
- tests: Reuse qemucapabilities data for qemucaps2xml (rhbz#1629862)
- tests: Add more tests to qemucaps2xml (rhbz#1629862)
- qemu: Drop QEMU_CAPS_ENABLE_KVM (rhbz#1629862)
- qemu: Avoid probing non-native binaries all the time (rhbz#1629862)
- qemu: Clarify QEMU_CAPS_KVM (rhbz#1629862)
- qemu: Don't check for /dev/kvm presence (rhbz#1629862)
- tests: Follow up on qemucaps2xmldata rename (rhbz#1629862)
- security: dac: also label listen UNIX sockets (rhbz#1634775)
- spec: Set correct TLS priority (rhbz#1632269)
- spec: Build ceph and gluster support everywhere (rhbz#1599546)
- virsh: Require explicit --domain for domxml-to-native (rhbz#1634769)
- virFileIsSharedFSType: Check for fuse.glusterfs too (rhbz#1634782)
- qemu: fix up permissions for pre-created UNIX sockets (rhbz#1634775)
- cpu_map: Add features for Icelake CPUs (rhbz#1527657, rhbz#1526625)
- cpu_map: Add Icelake CPU models (rhbz#1526625)
- qemu: Properly report VIR_DOMAIN_EVENT_RESUMED_FROM_SNAPSHOT (rhbz#1634758)
- qemu: Report more appropriate running reasons (rhbz#1634758)
- qemu: Pass running reason to RESUME event handler (rhbz#1634758)
- qemu: Map running reason to resume event detail (rhbz#1634758)
- qemu: Avoid duplicate resume events and state changes (rhbz#1634758)
- conf: qemu: add support for Hyper-V frequency MSRs (rhbz#1589702)
- conf: qemu: add support for Hyper-V reenlightenment notifications (rhbz#1589702)
- conf: qemu: add support for Hyper-V PV TLB flush (rhbz#1589702)

* Wed Sep  5 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-9
- RHEL: Fix virConnectGetMaxVcpus output (rhbz#1582222)
- storage: Add --shrink to qemu-img command when shrinking vol (rhbz#1622534)
- access: Fix nwfilter-binding ACL access API name generation (rhbz#1622540)
- conf: Add validation of input devices (rhbz#1591240)
- tests: qemu: Remove disk from graphics-vnc-tls (rhbz#1598167)
- tests: qemu: test more versions for graphics-vnc-tls (rhbz#1598167)
- qemu: vnc: switch to tls-creds-x509 (rhbz#1598167)
- qemu: mdev: Use vfio-pci 'display' property only with vfio-pci mdevs (rhbz#1624740)
- virDomainDefCompatibleDevice: Relax alias change check (rhbz#1603133)
- virDomainDetachDeviceFlags: Clarify update semantics (rhbz#1603133)
- virDomainNetDefCheckABIStability: Check for MTU change too (rhbz#1623158)
- RHEL: spec: Require python3-devel on RHEL-8 (rhbz#1518446)
- qemu: monitor: Remove qemuMonitorJSONExtractCPUArchInfo wrapper (rhbz#1598829)
- qemu: monitor: Use 'target' instead of 'arch' in reply of 'query-cpus-fast' (rhbz#1598829)

* Tue Aug 21 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-8
- tests: Add missing thread_siblings_list files (rhbz#1608479)
- util: Rewrite virHostCPUCountThreadSiblings() (rhbz#1608479)
- utils: Remove arbitrary limit on socket_id/core_id (rhbz#1608479)
- tests: Add linux-high-ids test (rhbz#1608479)
- qemu: hotplug: Fix asynchronous unplug of 'shmem' (rhbz#1618680)
- tests: rename hugepages to hugepages-default (rhbz#1615461)
- tests: extract hugepages-numa-default-dimm out of hugepages-numa (rhbz#1615461)
- tests: rename hugepages-numa into hugepages-numa-default (rhbz#1615461)
- tests: remove unnecessary XML elements from hugepages-numa-default (rhbz#1615461)
- tests: extract pages-discard out of hugepages-pages (rhbz#1615461)
- tests: rename hugepages-pages into hugepages-numa-nodeset (rhbz#1615461)
- tests: rename hugepages-pages2 into hugepages-numa-default-2M (rhbz#1615461)
- tests: extract pages-discard-hugepages out of hugepages-pages3 (rhbz#1615461)
- tests: rename hugepages-pages3 into hugepages-numa-nodeset-part (rhbz#1615461)
- tests: rename hugepages-pages4 into hugepages-numa-nodeset-nonexist (rhbz#1615461)
- tests: rename hugepages-pages5 into hugepages-default-2M (rhbz#1615461)
- tests: rename hugepages-pages6 into hugepages-default-system-size (rhbz#1615461)
- tests: rename hugepages-pages7 into pages-dimm-discard (rhbz#1615461)
- tests: rename hugepages-pages8 into hugepages-nodeset-nonexist (rhbz#1615461)
- tests: introduce hugepages-default-1G-nodeset-2M (rhbz#1615461)
- tests: introduce hugepages-nodeset (rhbz#1615461)
- conf: Move hugepage XML validation check out of qemu_command (rhbz#1615461)
- conf: Move hugepages validation out of XML parser (rhbz#1615461)
- conf: Introduce virDomainDefPostParseMemtune (rhbz#1615461)
- tests: sev: Test launch-security with specific QEMU version (rhbz#1619150)
- qemu: Fix probing of AMD SEV support (rhbz#1619150)
- qemu: caps: Format SEV platform data into qemuCaps cache (rhbz#1619150)
- conf: Parse guestfwd channel device info again (rhbz#1610072)

* Thu Aug 16 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-7
- qemu_migration: Avoid writing to freed memory (rhbz#1615854)

* Thu Aug  2 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-6
- qemu: Exempt video model 'none' from getting a PCI address on Q35
- conf: Fix a error msg typo in virDomainVideoDefValidate

* Tue Jul 31 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-5
- esx storage: Fix typo lsilogic -> lsiLogic
- networkGetDHCPLeases: Don't always report error if unable to read leases file
- nwfilter: Resolve SEGV for NWFilter Snoop processing
- qemu: Remove unused bypassSecurityDriver from qemuOpenFileAs
- qemuDomainSaveMemory: Don't enforce dynamicOwnership
- domain_nwfilter: Return early if net has no name in virDomainConfNWFilterTeardownImpl
- examples: Add clean-traffic-gateway into nwfilters

* Mon Jul 23 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-4
- qemu: hotplug: don't overwrite error message in qemuDomainAttachNetDevice
- qemu: hotplug: report error when changing rom enabled attr for net iface
- qemu: Fix setting global_period cputune element
- tests: qemucaps: Add test data for upcoming qemu 3.0.0
- qemu: capabilities: Add capability for werror/rerror for 'usb-device' frontend
- qemu: command: Move graphics iteration to its own function
- qemu: address: Handle all the video devices within a single loop
- conf: Introduce virDomainVideoDefClear helper
- conf: Introduce virDomainDefPostParseVideo helper
- qemu: validate: Enforce compile time switch type checking for videos
- tests: Add capabilities data for QEMU 2.11 x86_64
- tests: Update capabilities data for QEMU 3.0.0 x86_64
- qemu: qemuBuildHostdevCommandLine: Use a helper variable mdevsrc
- qemu: caps: Introduce a capability for egl-headless
- qemu: Introduce a new graphics display type 'headless'
- qemu: caps: Add vfio-pci.display capability
- conf: Introduce virDomainGraphicsDefHasOpenGL helper
- conf: Replace 'error' with 'cleanup' in virDomainHostdevDefParseXMLSubsys
- conf: Introduce new <hostdev> attribute 'display'
- qemu: command: Enable formatting vfio-pci.display option onto cmdline
- docs: Rephrase the mediated devices hostdev section a bit
- conf: Introduce new video type 'none'
- virt-xml-validate: Add schema for nwfilterbinding
- tools: Fix typo generating adapter_wwpn field
- src: Fix memory leak in virNWFilterBindingDispose

* Mon Jul 23 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-3
- qemu: hotplug: Do not try to add secret object for TLS if it does not exist
- qemu: monitor: Make qemuMonitorAddObject more robust against programming errors
- spec: Explicitly require matching libvirt-libs
- virDomainConfNWFilterInstantiate: initialize @xml to avoid random crash
- qemuProcessStartPRDaemonHook: Try to set NS iff domain was started with one
- qemuDomainValidateStorageSource: Relax PR validation
- virStoragePRDefFormat: Suppress path formatting for migratable XML
- qemu: Wire up PR_MANAGER_STATUS_CHANGED event
- qemu_monitor: Introduce qemuMonitorJSONGetPRManagerInfo
- qemu: Fetch pr-helper process info on reconnect
- qemu: Fix ATTRIBUTE_NONNULL for qemuMonitorAddObject
- virsh.pod: Fix a command name typo in nwfilter-binding-undefine
- docs: schema: Add missing <alias> to vsock device
- virnetdevtap: Don't crash on !ifname in virNetDevTapInterfaceStats
- tests: fix TLS handshake failure with TLS 1.3

* Mon Jul  9 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-2
- qemu: Add capability for the HTM pSeries feature
- conf: Parse and format the HTM pSeries feature
- qemu: Format the HTM pSeries feature
- qemu: hotplug: Don't access srcPriv when it's not allocated
- qemuDomainNestedJobAllowed: Allow QEMU_JOB_NONE
- src: Mention DEVICE_REMOVAL_FAILED event in virDomainDetachDeviceAlias docs
- virsh.pod: Drop --persistent for detach-device-alias
- qemu: don't use chardev FD passing with standalone args
- qemu: remove chardevStdioLogd param from vhostuser code path
- qemu: consolidate parameters of qemuBuildChrChardevStr into flags
- qemu: don't use chardev FD passing for vhostuser backend
- qemu: fix UNIX socket chardevs operating in client mode
- qemuDomainDeviceDefValidateNetwork: Check for range only if IP prefix set
- spec: Temporarily drop gluster support

* Tue Jul  3 2018 Jiri Denemark <jdenemar@redhat.com> - 4.5.0-1
- Rebased to libvirt-4.5.0

* Fri May 25 2018 Jiri Denemark <jdenemar@redhat.com> - 4.3.0-1
- Rebased to libvirt-4.3.0

* Wed Mar 21 2018 Daniel P. Berrangé <berrange@redhat.com> - 4.1.0-2
- Fix systemd macro argument with line continuations (rhbz#1558648)

* Mon Mar  5 2018 Daniel Berrange <berrange@redhat.com> - 4.1.0-1
- Rebase to version 4.1.0

* Wed Feb 07 2018 Fedora Release Engineering <releng@fedoraproject.org> - 4.0.0-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild

* Fri Jan 19 2018 Daniel P. Berrange <berrange@redhat.com> - 4.0.0-1
- Rebase to version 4.0.0

* Wed Dec 20 2017 Cole Robinson <crobinso@redhat.com> - 3.10.0-2
- Rebuild for xen 4.10

* Tue Dec  5 2017 Daniel P. Berrange <berrange@redhat.com> - 3.10.0-1
- Rebase to version 3.10.0

* Fri Nov  3 2017 Daniel P. Berrange <berrange@redhat.com> - 3.9.0-1
- Rebase to version 3.9.0

* Wed Oct  4 2017 Daniel P. Berrange <berrange@redhat.com> - 3.8.0-1
- Rebase to version 3.8.0

* Mon Sep  4 2017 Daniel P. Berrange <berrange@redhat.com> - 3.7.0-1
- Rebase to version 3.7.0

* Wed Aug  2 2017 Daniel P. Berrange <berrange@redhat.com> - 3.6.0-1
- Rebase to version 3.6.0

* Sun Jul 30 2017 Florian Weimer <fweimer@redhat.com> - 3.5.0-4
- Rebuild with binutils fix for ppc64le (#1475636)

* Tue Jul 25 2017 Daniel P. Berrange <berrange@redhat.com> - 3.5.0-3
- Disabled RBD on i386, arm, ppc64 (rhbz #1474743)

* Mon Jul 17 2017 Cole Robinson <crobinso@redhat.com> - 3.5.0-2
- Rebuild for xen 4.9

* Thu Jul  6 2017 Daniel P. Berrange <berrange@redhat.com> - 3.5.0-1
- Rebase to version 3.5.0

* Fri Jun  2 2017 Daniel P. Berrange <berrange@redhat.com> - 3.4.0-1
- Rebase to version 3.4.0

* Mon May  8 2017 Daniel P. Berrange <berrange@redhat.com> - 3.3.0-1
- Rebase to version 3.3.0

* Mon Apr  3 2017 Daniel P. Berrange <berrange@redhat.com> - 3.2.0-1
- Rebase to version 3.2.0

* Fri Mar  3 2017 Daniel P. Berrange <berrange@redhat.com> - 3.1.0-1
- Rebase to version 3.1.0

* Fri Feb 10 2017 Fedora Release Engineering <releng@fedoraproject.org> - 3.0.0-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild

* Thu Jan 19 2017 Daniel P. Berrange <berrange@redhat.com> - 3.0.0-1
- Rebase to version 3.0.0