## START: Set by rpmautospec ## (rpmautospec version 0.2.6) %define autorelease(e:s:pb:) %{?-p:0.}%{lua: release_number = 27; base_release_number = tonumber(rpm.expand("%{?-b*}%{!?-b:1}")); print(release_number + base_release_number - 1); }%{?-e:.%{-e*}}%{?-s:.%{-s*}}%{?dist} ## END: Set by rpmautospec Name: libpri Version: 1.6.0 %global so_version 1 Release: %autorelease Summary: An implementation of Primary Rate ISDN # From README: # As a special exception, libpri may also be linked to the OpenH323 library, # so long as the entirity of the derivative work (as defined within the GPL) # is licensed either under the MPL of the OpenH323 license or the GPL of # libpri. # From source file headers: # In addition, when this program is distributed with Asterisk in any form # that would qualify as a 'combined work' or as a 'derivative work' (but not # mere aggregation), you can redistribute and/or modify the combination under # the terms of the license provided with that copy of Asterisk, instead of # the license terms granted here. # The Makefile (only) is GPLv2+, but this does not affect the license of the # binary RPMs. License: GPLv2 with exceptions URL: https://www.asterisk.org/ %global src_base https://downloads.asterisk.org/pub/telephony/libpri/releases Source0: %{src_base}/libpri-%{version}.tar.gz Source1: %{src_base}/libpri-%{version}.tar.gz.asc # Keyring with developer signatures created on 2021-02-23 with: # workdir="$(mktemp --directory)" # gpg2 --with-fingerprint libpri-1.6.0.tar.gz.asc 2>&1 | # awk '$2 == "using" { print "0x" $NF }' | # xargs gpg2 --homedir="${workdir}" \ # --keyserver=hkp://pool.sks-keyservers.net --recv-keys # gpg2 --homedir="${workdir}" --export --export-options export-minimal \ # > libpri.gpg # rm -rf "${workdir}" # Inspect keys using: # gpg2 --list-keys --no-default-keyring --keyring ./libpri.gpg Source2: libpri.gpg # Upstream bug PRI-186: # https://issues.asterisk.org/jira/browse/PRI-186 # Debian downstream bug: # https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=957470 # Patch from Debian, which we use unmodified: # https://bugs.debian.org/cgi-bin/bugreport.cgi?att=1;bug=957470;filename=zero-sized-members.patch;msg=32 Patch: zero-sized-members.patch BuildRequires: gnupg2 BuildRequires: make BuildRequires: gcc BuildRequires: dahdi-tools-devel %description libpri is a C implementation of the Primary Rate ISDN specification. It was based on the Bellcore specification SR-NWT-002343 for National ISDN. As of May 12, 2001, it has been tested work to with NI-2, Nortel DMS-100, and Lucent 5E Custom protocols on switches from Nortel and Lucent. %package devel Summary: Development files for libpri Requires: libpri%{?_isa} = %{version}-%{release} %description devel The libpri-devel package contains libraries and header files for developing applications that use libpri. %package doc Summary: Documentation for libpri BuildArch: noarch %description doc Currently, the libpri-doc package contains the pseudocode for the finite state machines used in its implementation. %prep %{gpgverify} --keyring='%{SOURCE2}' --signature='%{SOURCE1}' --data='%{SOURCE0}' %autosetup %build %set_build_flags %make_build %install %make_install INSTALL_BASE=%{_prefix} libdir=%{_libdir} # Remove the static library find %{buildroot} -name '*.a' -print -delete %check ./rosetest ./testprilib %files %license LICENSE %doc ChangeLog %doc README %{_libdir}/libpri.so.%{so_version}.* %files devel %{_includedir}/libpri.h %{_libdir}/libpri.so %files doc %license LICENSE %doc ChangeLog %doc README %doc doc/*.fsm %changelog * Thu Sep 22 2022 Benjamin A. Beasley 1.6.0-27 - Correct License from GPLv2+ to GPLv2 with exceptions * Thu Jul 21 2022 Fedora Release Engineering 1.6.0-26 - Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild * Sat Apr 16 2022 Benjamin A. Beasley 1.6.0-25 - Stop numbering patches * Thu Jan 20 2022 Fedora Release Engineering 1.6.0-24 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Thu Nov 11 2021 Benjamin A. Beasley 1.6.0-23 - Re-wrap description * Thu Nov 11 2021 Benjamin A. Beasley 1.6.0-22 - Stop (incorrectly) meddling with the .so symlinks * Thu Nov 11 2021 Benjamin A. Beasley 1.6.0-21 - Reduce macro indirection in the spec file * Thu Jul 22 2021 Fedora Release Engineering 1.6.0-20 - Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild * Tue Jul 20 2021 Benjamin A. Beasley 1.6.0-19 - Drop EPEL workarounds * Tue Feb 23 2021 Benjamin A. Beasley - 1.6.0-13 - Improve keyring generation instructions - Add ldconfig_scriptlets macro for EPEL7 only * Tue Jan 26 2021 Fedora Release Engineering - 1.6.0-12 - Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild * Sat Dec 5 2020 Benjamin A. Beasley - 1.6.0-11 - Trivial typo fix in description * Fri Dec 4 2020 Benjamin A. Beasley - 1.6.0-10 - Add source file verification * Thu Dec 3 2020 Benjamin A. Beasley - 1.6.0-9 - Reformat whitespace - Convert URLs from HTTP to HTTPS - Add BR on make for https://fedoraproject.org/wiki/Changes/Remove_make_from_BuildRoot - Use macros to reduce repetition throughout - Use modern macros (license, make_build/make_install) - Make -devel dependency on main package strict (arched) - Add -doc subpackage with finite state machine pseudocode - Fix so version symlinking - Add patch from Debian for upstream issue PRI-186 (libpri fails to build with GCC 10) - Honor system rpm configuration build flags, including hardening flags - Run some tests * Sat Aug 01 2020 Fedora Release Engineering - 1.6.0-8 - Second attempt - Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild * Tue Jul 28 2020 Fedora Release Engineering - 1.6.0-7 - Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild * Wed Jan 29 2020 Fedora Release Engineering - 1.6.0-6 - Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild * Thu Jul 25 2019 Fedora Release Engineering - 1.6.0-5 - Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild * Fri Feb 01 2019 Fedora Release Engineering - 1.6.0-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild * Fri Jul 13 2018 Fedora Release Engineering - 1.6.0-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild * Mon Feb 19 2018 Jared Smith - 1.6.0-2 - Add missing BuildRequires on gcc * Wed Feb 14 2018 Jared Smith - 1.6.0-1 - Update to upstream 1.6.0 release - Convert to using ldconfig_scriptlets macro - Fix invalid dates in changelog entries * Wed Feb 07 2018 Fedora Release Engineering - 1.4.13-11 - Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild * Thu Aug 03 2017 Fedora Release Engineering - 1.4.13-10 - Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild * Wed Jul 26 2017 Fedora Release Engineering - 1.4.13-9 - Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild * Fri Feb 10 2017 Fedora Release Engineering - 1.4.13-8 - Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild * Thu Feb 04 2016 Fedora Release Engineering - 1.4.13-7 - Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild * Wed Jun 17 2015 Fedora Release Engineering - 1.4.13-6 - Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild * Sun Aug 17 2014 Fedora Release Engineering - 1.4.13-5 - Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild * Sat Jun 07 2014 Fedora Release Engineering - 1.4.13-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild * Sat Aug 03 2013 Fedora Release Engineering - 1.4.13-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild * Thu Feb 14 2013 Fedora Release Engineering - 1.4.13-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild * Tue Oct 9 2012 Jeffrey Ollie - 1.4.13-1 - The Asterisk Development Team has announced the release of libpri 1.4.13. - This release is available for immediate download at - http://downloads.asterisk.org/pub/telephony/libpri - - The release of libpri 1.4.13 resolves several issues reported by the - community and would have not been possible without your participation. - Thank you! - - The following are the issues resolved in this release: - - * --- Outgoing BRI calls fail when using Asterisk 1.8 with HA8, HB8, - and B410P cards. - (Issue AST-598. Reported by Trey Blancher) - - * --- Implement handling a multi-channel RESTART request. - (Closes issue PRI-93. Reported by Marcin Kowalczyk) - - * --- Removed MDL/TEI management configuration warning message. - (Closes issue PRI-137. Reported by Bart Coninckx) - - * --- Allow passing compiler flags (CFLAGS, LDFLAGS) - (Closes issue PRI-144. Reported by Tzafrir Cohen) - - For a full list of changes in this release, please see the ChangeLog: - - http://downloads.asterisk.org/pub/telephony/libpri/ChangeLog-1.4.13 * Thu Jul 19 2012 Fedora Release Engineering - 1.4.12-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild * Fri Jan 13 2012 Fedora Release Engineering - 1.4.12-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild * Wed Jul 6 2011 Jeffrey C. Ollie - 1.4.12-1 - The Asterisk Development Team announces the release of libpri version - 1.4.12. This release is available for immediate download at - http://downloads.asterisk.org/pub/telephony/libpri/ - - The following are some of the issues resolved in this release: - - * Add call transfer exchange of subaddresses support and fix PTMP call - transfer signaling. - - * Invalid PTMP redirecting signaling as TE towards NT. - - * Add Q931_IE_TIME_DATE to CONNECT message when in network mode. - (issue #18047 (JIRA PRI-114). Reported by: wuwu. Patched by rmudgett) - - * Swap of master/slave in pri_enslave() incorrect. - (issue #18769 (JIRA PRI-120). Reported by: jcollie. Patched by jcollie) - - * Fix I-frame retransmission quirks. - - * Crash if NFAS swaps D channels on a call with an active timer. - - * DMS-100 not receiving caller name anymore. - (issue #18822 (JIRA PRI-121). Reported by: cmorford. Patched by rmudgett) - - * B channel lost by incoming call in BRI NT PTMP mode. - - * Implement the mandatory T312 timer for NT PTMP broadcast SETUP calls. - - This release contains several new features, among them: - - 1.) ETSI and Q.SIG Call Completion Supplementary Service (CCSS) support - 2.) ETSI Advice Of Charge (AOC) support - 3.) ETSI Explicit Call Transfer (ECT) support - 4.) ETSI Call Waiting support for ISDN phones - 5.) ETSI Malicious Call ID support - 6.) Add Display IE text handling options. - - For a full list of changes in this release, please see the ChangeLog: - - http://downloads.asterisk.org/pub/telephony/libpri/releases/ChangeLog-1.4.12 * Tue Feb 8 2011 Jeffrey C. Ollie - 1.4.12-0.3.beta3 - - The following are some of the issues resolved in this beta release: - - * Prevent a CONNECT message from sending a CONNECT ACKNOWLEDGE in the - wrong state. - (issue #17360. Reported by: shawkris. Patched by rmudgett) - - * Made Q.921 delay events to Q.931 if the event could immediately - generate response frames. - (closes issue #17360. Reported by: shawkris. Patched by rmudgett) - - * BRI PTMP: Active channels not cleared when the interface goes down. - (closes issue #17865. Reported by: wimpy. Patched by rmudgett) - - * Segfault in pri_schedule_del() - ctrl value is invalid. - (closes issue #17522) - (closes issue #18032. Reported by: schmoozecom. Patched by rmudgett) - - * Crash when receiving an unknown/unsupported message type. - (closes issue #17968. Reported by: gelo. Patched by rmudgett) - - * B410P gets incoming call packets on ISDN but Asterisk doesn't see the - call. - (closes issue #18232. Reported by: lelio. Patched by rmudgett) - - * SABME flood on backup D-channel in NFAS configuration. - (closes issue #18255. Reported by: bklang. Patched by rmudgett) - - * Asterisk is getting a "No D-channels available!" warning message every - 4 seconds. - (closes issue #17270. Reported by: jmls. Patched by rmudgett) - - This beta release contains several new features, among them: - - 1.) ETSI and Q.SIG Call Completion Supplementary Service (CCSS) support - 2.) ETSI Advice Of Charge (AOC) support - 3.) ETSI Explicit Call Transfer (ECT) support - 4.) ETSI Call Waiting support for ISDN phones - 5.) ETSI Malicious Call ID support - - For a full list of changes in the current release candidate, please see - the ChangeLog: - - http://downloads.asterisk.org/pub/telephony/libpri/releases/ChangeLog-1.4.12-beta3 * Tue Feb 08 2011 Fedora Release Engineering - 1.4.12-0.2.beta2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild * Fri Oct 8 2010 Jeffrey C. Ollie - 1.4.12-0.2.beta2 - The following are some of the issues resolved in this beta release: - - * Fix issue where calling name is not successfully processed on inbound - QSIG PRI calls from Mitel PBX. - (Closes issue #17619. Reported by: jims8650. Patched by rmudgett) - - * Added missing code specified by Q.921 (Figure B.8 Page 85) when receive - RNR in "Timer Recovery" state. - (Closes issue #16791. Reported by: alecdavis. Patched by alecdavis) - - * Fixed issue where incoming calls specifying the channel using a slot - map could not negotiate a B channel correctly. - - * Add support to receive ECMA-164 2nd edition OID name ROSE messages. - - * Fixed issue where ISDN BRI PTMP TE does not recover from line faults. - (Closes issue #17570. Reported by: jcovert. Patched by rmudgett) - - * Q.921 improvements from comparing Q.921 SDL diagrams with implementation. - - * Q.921/Q.931 message debug output improvements. - - This beta release contains several new features, among them: - - 1.) ETSI and Q.SIG Call Completion Supplementary Service (CCSS) support - 2.) ETSI Advice Of Charge (AOC) support - 3.) ETSI Explicit Call Transfer (ECT) support - 4.) ETSI Call Waiting support for ISDN phones - 5.) ETSI Malicious Call ID support - - For a full list of changes in the current release candidate, please see - the ChangeLog: - - http://downloads.asterisk.org/pub/telephony/libpri/releases/ChangeLog-1.4.12-beta2 * Mon Aug 2 2010 Jeffrey C. Ollie - 1.4.12-0.1.beta1 - 1.4.12-beta1 - - This beta release contains some fixes and several new features, among them: - - 1.) ETSI and Q.SIG Call Completion Supplementary Service (CCSS) support - - 2.) ETSI Advice Of Charge (AOC) support - - 3.) ETSI Explicit Call Transfer (ECT) support - - 4.) ETSI Call Waiting support for ISDN phones - - 5.) ETSI Malicious Call ID support - - For a full list of changes in the current release candidate, please see - the ChangeLog: - - http://downloads.asterisk.org/pub/telephony/libpri/releases/ChangeLog-1.4.12-beta1 * Mon Aug 2 2010 Jeffrey C. Ollie - 1.4.11.3-1 - 1.4.11.3: - This release fixes a regression in the calling number assignment logic: - - * Calling Number assignment logic change in libpri 1.4.11. Restored the old - behaviour if there is more than one calling number in the incoming SETUP - message. A network provided number is reported as ANI. - (Closes issue #17495. Reported and tested by ibercom. Patched by rmudgett) - - For a full list of changes in the current release, please see the ChangeLog: - - http://downloads.asterisk.org/pub/telephony/libpri/releases/ChangeLog-1.4.11.3 * Thu Jun 10 2010 Jeffrey C. Ollie - 1.4.11.2-1 - 1.4.11.2: - - This release fixes situation where Q.SIG calling name in FACILITY - message was not reported to the upper layer: - - * pri_facility.c: Q.SIG calling name in FACILITY message not reported - to the upper layer. Q.SIG can send the CallingName, CalledName, and - ConnectedName in stand alone FACILITY messages. If the CallingName - was not sent in the SETUP message, the caller id name was not - reported to the upper layer. (Closes issue #17458. Reported, tested - by: jsmith. Patched by rmudgett) - - For a full list of changes in the current release, please see the - ChangeLog: - - http://downloads.asterisk.org/pub/telephony/libpri/releases/ChangeLog-1.4.11.2 - - 1.4.11.1: - - This release fixes a regression in multi component FACILITY messages - and includes a minor bug fix for BRI spans: - - * Multi component FACILITY messages only process the first - component. The code was only processing the first ROSE component in - the facility message. (Closes issue #17428. Reported, tested by: - patrol-cz. Patched by rmudgett) - - * Inband disconnect setting does nothing on BRI spans. The - acceptinbanddisconnect flag is not inherited when creating a new TEI - and thus rendering the setting (and its respective equivalent in - Asterisk) a no-op on BRI setups. (Closes issue #15265. Reported, - patched, tested by: paravoid) - - For a full list of changes in the current release, please see the - ChangeLog: - - http://downloads.asterisk.org/pub/telephony/libpri/releases/ChangeLog-1.4.11.1 * Wed May 26 2010 Jeffrey C. Ollie - 1.4.11-1 - This release contains many fixes and new features, among them being: - - 1.) Support for NT-PTMP BRI links, including support for multiple TEIs - and connecting of BRI phones. - - 2.) Support for allowing persistent Q.921 drops on both NT and TE PTMP - links, as well as automatically requesting that Q.921 data links - reactivate when needed by Q.931. - - 3.) T309 is enabled by default. - - 4.) Problems with Keypad Facility Digits were addressed. - - 5.) A number of additional service related features were added: - Connected Line Information, HOLD/RELEASE support, Call Deflection/Call - Rerouting, as well as partial subaddress support. They are supported in - the Q.SIG and EuroISDN switch types, and most currently require using - the trunk version of Asterisk. - - 6.) Many potential and realized Q.921 related problems, particularly - during retransmissions and other scenarios involving medium to high - packet loss. - - For a full list of changes in the current release candidates, please see - the ChangeLog: - - http://downloads.asterisk.org/pub/telephony/libpri/releases/ChangeLog-1.4.11 * Tue Oct 20 2009 Jeffrey C. Ollie - 1.4.10.2-1 - Update to libpri 1.4.10.2 * Sat Jul 25 2009 Fedora Release Engineering - 1.4.10-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild * Fri Apr 24 2009 Jeffrey C. Ollie - 1.4.10-1 - Update to 1.4.10 * Wed Feb 25 2009 Fedora Release Engineering - 1.4.7-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild * Tue Aug 5 2008 Jeffrey C. Ollie - 1.4.7-1 - Update to 1.4.7 * Tue Jul 29 2008 Jeffrey C. Ollie - 1.4.6-1 - Update to 1.4.6 * Mon Feb 11 2008 Jeffrey C. Ollie - 1.4.3-2 - Rebuild for GCC 4.3 * Thu Dec 20 2007 Jeffrey C. Ollie - 1.4.3-1 - Update to 1.4.3. - Drop upstreamed patch. * Thu Nov 1 2007 Jeffrey C. Ollie - 1.4.2-1 - Update to 1.4.2 * Wed Aug 29 2007 Jeffrey C. Ollie - 1.4.1-5 - Bump release. * Wed Aug 29 2007 Jeffrey C. Ollie - 1.4.1-4 - Add patch to define size_t * Wed Aug 29 2007 Jeffrey C. Ollie - 1.4.1-3 - Update license tag. - Update URL. * Wed Aug 29 2007 Fedora Release Engineering - 1.4.1-2 - Rebuild for selinux ppc32 issue. * Mon Jul 9 2007 Jeffrey C. Ollie - 1.4.1-1 - Update to 1.4.1 * Sat Dec 23 2006 Jeffrey C. Ollie - 1.4.0-3 - Update to 1.4.0 final * Sat Oct 14 2006 Jeffrey C. Ollie - 1.4.0-2.beta1 - Fix lib paths for 64 bit systems. * Sat Oct 14 2006 Jeffrey C. Ollie - 1.4.0-1.beta1 - Get rid of pesky "." in -devel summary. - Remove zaptel-devel BR * Fri Oct 13 2006 Jeffrey C. Ollie - 1.4.0-1.beta1 - devel package needs to Require: main package * Fri Oct 13 2006 Jeffrey C. Ollie - 1.4.0-0.beta1 - Update to 1.4.0-beta1 * Fri Jun 2 2006 Jeffrey C. Ollie - 1.2.3 - Update to 1.2.3 - Add dist tag to release - Update source URL * Wed Jan 18 2006 Jeffrey C. Ollie - 1.2.2-1 - Update to 1.2.2. - Fix the spelling of Paul Komkoff Jr.'s name. * Fri Jan 13 2006 Jeffrey C. Ollie - 1.2.1-4 - Eliminate the libpri-install.patch and other improvements based on suggestions from Paul Komkoff Jr. * Thu Jan 12 2006 Jeffrey C. Ollie - 1.2.1-3 - Fix building on 64 bit systems. * Thu Jan 12 2006 Jeffrey C. Ollie - 1.2.1-2 - Changed buildroot to meet FE packaging guidelines - Don't forget docs - Modify %%post so that ldconfig dep will be picked up automatically - Add %%postun so that ldconfig gets run on uninstall - Don't package the static library - Changed $RPM_BUILD_ROOT to %%{buildroot} (yes, I know I was consistent before, but I prefer %%{buildroot}) * Wed Jan 11 2006 Jeffrey C. Ollie - 1.2.1-1 - First version for Fedora Extras