The dodgr_dists_categorical function enables multiple distances to be aggregated along distinct categories of edges with a single query. This is particularly useful to examine information on proportions of total distances routed along different edge categories. The following three sub-sections describe the three main uses and interfaces of the dodgr_dists_categorical function. Each of these requires an input graph to have an additional column named "edge_type", which labels discrete categories of edges. These can be any kind of discrete labels at all, from integer values to character labels or factors. The labels are retained in the result, as demonstrated below.

1 Full Distance Information for Edge Categories

The “default” interface of the dodgr_dists_categorical function requires the same three mandatory parameters as dodgr_distances, of

  1. A weighted graph on which the distances are to be calculated;
  2. A vector of from points from which distances are to be calculated; and
  3. A corresponding vector of to points.

As for dodgr_distances, the from and to arguments can be either vertex identifiers (generally as from_id and to_id columns of the input graph), or two-column coordinates for spatial graphs. The following code illustrates the procedure, using the internal data set, hampi, from the settlement of Hampi in the middle of a national park in the Deccan Plains of India. The following code also reduces the network to the largest connected component only, to ensure all points are mutually reachable.

graph <- weight_streetnet (hampi, wt_profile = "foot")
graph <- graph [graph$component == 1, ]
graph$edge_type <- graph$highway
table (graph$edge_type)
## 
##         path      primary  residential    secondary      service        steps 
##         2767          106           32          560          184           28 
##        track unclassified 
##          518          454

That network then has 8 distinct edge types. Submitting this graph to the function, and calculating pairwise distances between all points, then gives the following result:

v <- dodgr_vertices (graph)
from <- to <- v$id
d <- dodgr_dists_categorical (graph, from, to)
class (d)
## [1] "list"                    "dodgr_dists_categorical"
length (d)
## [1] 9
sapply (d, dim)
##      distances path primary residential secondary service steps track
## [1,]      2270 2270    2270        2270      2270    2270  2270  2270
## [2,]      2270 2270    2270        2270      2270    2270  2270  2270
##      unclassified
## [1,]         2270
## [2,]         2270

The result has the dedicated class, dodgr_dists_categorical, which it itself a list of matrices, one for each distinct edge type. This class enables a convenient summary method which converts data on aggregate distances along each category of edges into overall proportions:

summary (d)
## Proportional distances along each kind of edge:
##   path: 0.5133
##   primary: 0.016
##   residential: 4e-04
##   secondary: 0.1559
##   service: 0.0607
##   steps: 0.0018
##   track: 0.1018
##   unclassified: 0.15

Those statistics clearly highlight the fact that Hampi is a pedestrian town - most ways are either paths or tracks, with a new “secondary” ways for access vehicles.

2. Proportional Distances along each Edge Category

If summary results like those immediately above are all that is desired, then a proportions_only parameter can be used in the dodgr_dists_categorical() function to directly return those:

dodgr_dists_categorical (graph, from, to,
                         proportions_only = TRUE)
##         path      primary  residential    secondary      service        steps 
## 0.5133387472 0.0159931421 0.0004095266 0.1558683424 0.0607239796 0.0018185703 
##        track unclassified 
## 0.1018482816 0.1499994102

Queries with proportions_only = TRUE are constructed in a different way in the underlying C++ code that avoids storing the full list of matrices in memory. For most jobs, this should translate to faster queries, as illustrated in the following benchmark:

bench::mark (full = dodgr_dists_categorical (graph, from, to),
             prop_only = dodgr_dists_categorical (graph, from, to,
                                                  proportions_only = TRUE),
             check = FALSE, time_unit = "s") [, 1:3]
## # A tibble: 2 × 3
##   expression    min median
##   <bch:expr>  <dbl>  <dbl>
## 1 full       0.440  0.489 
## 2 prop_only  0.0902 0.0926

The default value of proportions_only = FALSE should be used only if additional information from the distance matrices themselves is required or desired. Examples of such additional information include parameters quantifying the distributions of the various distance metrics, as further examined below.

3. Proportional Distances within a Threshold Distance

The third and final use of the dodgr_dists_categorical function is through the dlimit parameter, used to specify a distance threshold below which categorical distances are to be aggregated. This is useful to examine relative proportions of different edges types necessary in travelling in any and all directions away from each point or vertex of a graph.

When a dlimit parameter is specified, the to parameter is ignored, and distances are aggregated along all possible routes away from each from point, out to the specified dlimit. The value of dlimit must be specified relative to the edge distance values contained in the input graph. For spatial graphs obtained with dodgr_streetnet() or dodgr_streetnet_sc(), for example, as well as the internal hampi data, these distances are in metres, and so dlimit must be specified in metres.

The result is then a single matrix in which each row represents one of the from points, and there is one column of aggregate distances for each edge type, plus an initial column of overall distances. The following code illustrates:

dlimit <- 2000 # in metres
d <- dodgr_dists_categorical (graph, from, dlimit = dlimit)
dim (d)
## [1] 2270    9
head (d)
##             distance     path primary residential secondary   service steps
## 339318500  12081.132 9374.439       0           0         0 2621.8834     0
## 339318502   4136.047 3520.947       0           0         0  615.1004     0
## 2398958028  4153.829 3538.728       0           0         0  615.1004     0
## 1427116077  6172.783 5142.914       0           0         0  963.0322     0
## 7799710916  4191.254 3576.153       0           0         0  615.1004     0
## 339318503   6211.668 5596.568       0           0         0  615.1004     0
##            track unclassified
## 339318500      0     84.80908
## 339318502      0      0.00000
## 2398958028     0      0.00000
## 1427116077     0     66.83674
## 7799710916     0      0.00000
## 339318503      0      0.00000

The row names of the resultant data.frame are the vertex identifiers specified in the from parameter. Such results can easily be combined with spatial information on the vertices obtained from the dodgr_vertices() function to generate spatial maps of relative proportions around each point in a graph or network. Summary statistics can also readily be extracted, for example,

hist (d$path / d$distance,
      xlab = "Relative proportions of trips along paths", main = "")

Trips along paths are roughly evenly distributed between 0 and 1. In contrast, proportions of trips along service ways – used to facilitate motorised vehicular access in the otherwise car-free area of Hampi, India – are distinctly different:

hist (d$service / d$distance,
      xlab = "Relative proportions of trips along service ways", main = "")

These distributions provide more detailed and nuanced insights than those provided by the overall summary functions above, which only revealed overall respective relative proportions of 0.51 and 0.06 for paths and service ways. The results within the distance threshold reveal that the distributional forms of proportional distances differ as much as the aggregate values, and that both aspects of the function provide distinct insights into proportional distances along categories of edge types.

Finally, this use of the function also utilizes distinct difference in the underlying C++ code that are even more efficient that the previous case of proportional distances. The following code benchmarks the three modes:

bench::mark (full = dodgr_dists_categorical (graph, from, to),
             prop_only = dodgr_dists_categorical (graph, from, to,
                                                  proportions_only = TRUE),
             dlimit = dodgr_dists_categorical (graph, from, dlimit = 2000),
             check = FALSE, time_unit = "s") [, 1:3]
## # A tibble: 3 × 3
##   expression    min median
##   <bch:expr>  <dbl>  <dbl>
## 1 full       0.440  0.441 
## 2 prop_only  0.0906 0.0945
## 3 dlimit     0.0295 0.0312

Finally, note that the efficiency of distance-threshold queries scales non-linearly with increases in dlimit, with queries quickly becoming less efficient for larger values of dlimit.