Warning: Permanently added '2620:52:3:1:dead:beef:cafe:c15a' (ED25519) to the list of known hosts. cmd: ['copr-distgit-client', 'sources'] cwd: /var/lib/copr-rpmbuild/workspace/workdir-nc8i9z4k/perl-Coro-Multicore rc: 0 stdout: stderr: INFO: Reading stdout from command: git rev-parse --abbrev-ref HEAD INFO: Reading stdout from command: git rev-parse HEAD INFO: Reading sources specification file: sources INFO: Downloading Coro-Multicore-1.07.tar.gz INFO: Calling: curl -H Pragma: -o Coro-Multicore-1.07.tar.gz --location --remote-time --show-error --fail https://copr-dist-git.fedorainfracloud.org/repo/pkgs/jakub/gcc-13-test/perl-Coro-Multicore/Coro-Multicore-1.07.tar.gz/md5/efc628c62a097025b2eb7a0347fde6b9/Coro-Multicore-1.07.tar.gz % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 24262 100 24262 0 0 384k 0 --:--:-- --:--:-- --:--:-- 388k INFO: Reading stdout from command: md5sum Coro-Multicore-1.07.tar.gz Running (timeout=115200): unbuffer mock --buildsrpm --spec /var/lib/copr-rpmbuild/workspace/workdir-nc8i9z4k/perl-Coro-Multicore/perl-Coro-Multicore.spec --sources /var/lib/copr-rpmbuild/workspace/workdir-nc8i9z4k/perl-Coro-Multicore --resultdir /var/lib/copr-rpmbuild/results --uniqueext 1672119885.721026 -r /var/lib/copr-rpmbuild/results/configs/child.cfg INFO: mock.py version 3.5 starting (python version = 3.11.0, NVR = mock-3.5-1.fc37)... Start(bootstrap): init plugins INFO: tmpfs initialized INFO: selinux enabled INFO: chroot_scan: initialized INFO: compress_logs: initialized Finish(bootstrap): init plugins Start: init plugins INFO: tmpfs initialized INFO: selinux enabled INFO: chroot_scan: initialized INFO: compress_logs: initialized Finish: init plugins INFO: Signal handler active Start: run INFO: Start(/var/lib/copr-rpmbuild/workspace/workdir-nc8i9z4k/perl-Coro-Multicore/perl-Coro-Multicore.spec) Config(fedora-rawhide-i686) Start: clean chroot Finish: clean chroot Start(bootstrap): chroot init INFO: mounting tmpfs at /var/lib/mock/fedora-rawhide-i686-bootstrap-1672119885.721026/root. INFO: calling preinit hooks INFO: enabled root cache INFO: enabled package manager cache Start(bootstrap): cleaning package manager metadata Finish(bootstrap): cleaning package manager metadata INFO: enabled HW Info plugin Mock Version: 3.5 INFO: Mock Version: 3.5 Start(bootstrap): dnf install No matches found for the following disable plugin patterns: local, spacewalk, versionlock Updating Subscription Management repositories. Unable to read consumer identity This system is not registered with an entitlement server. You can use subscription-manager to register. Copr repository 65 MB/s | 29 MB 00:00 Additional repo https_jakub_fedorapeople_org_fe 213 kB/s | 86 kB 00:00 local 16 MB/s | 60 MB 00:03 Dependencies resolved. ========================================================================================================================= Package Arch Version Repository Size ========================================================================================================================= Installing: dnf noarch 4.14.0-1.fc38 local 469 k dnf-plugins-core noarch 4.3.1-1.fc38 local 34 k Installing dependencies: alternatives i686 1.21-1.fc38 copr_base 39 k audit-libs i686 3.0.9-2.fc38 local 122 k basesystem noarch 11-14.fc37 local 7.0 k bash i686 5.2.9-3.fc38 copr_base 1.8 M bzip2-libs i686 1.0.8-12.fc38 copr_base 42 k ca-certificates noarch 2022.2.54-5.fc37 local 829 k coreutils i686 9.1-8.fc38 copr_base 1.1 M coreutils-common i686 9.1-8.fc38 copr_base 2.0 M crypto-policies noarch 20221215-1.gita4c31a3.fc38 local 63 k curl i686 7.87.0-1.fc38 copr_base 347 k cyrus-sasl-lib i686 2.1.28-8.fc38 copr_base 858 k dbus-libs i686 1:1.14.4-1.fc38 copr_base 167 k dnf-data noarch 4.14.0-1.fc38 local 43 k elfutils-default-yama-scope noarch 0.188-3.fc38 copr_base 16 k elfutils-libelf i686 0.188-3.fc38 copr_base 204 k elfutils-libs i686 0.188-3.fc38 copr_base 287 k expat i686 2.5.0-1.fc38 copr_base 115 k fedora-gpg-keys noarch 38-0.3 local 115 k fedora-release noarch 38-0.6 local 11 k fedora-release-common noarch 38-0.6 local 21 k fedora-release-identity-basic noarch 38-0.6 local 11 k fedora-repos noarch 38-0.3 local 10 k fedora-repos-rawhide noarch 38-0.3 local 9.7 k file-libs i686 5.42-4.fc38 copr_base 684 k filesystem i686 3.18-2.fc37 local 1.1 M findutils i686 1:4.9.0-2.fc38 copr_base 494 k gawk i686 5.1.1-4.fc38 copr_base 1.0 M gdbm-libs i686 1:1.23-2.fc38 copr_base 60 k glib2 i686 2.74.1-2.fc38 copr_base 2.8 M glibc i686 2.36.9000-19.fc38 local 1.9 M glibc-common i686 2.36.9000-19.fc38 local 315 k glibc-minimal-langpack i686 2.36.9000-19.fc38 local 30 k gmp i686 1:6.2.1-3.fc38 copr_base 306 k gnupg2 i686 2.3.8-1.fc38 copr_base 2.6 M gnutls i686 3.7.8-9.fc38 copr_base 1.1 M gpgme i686 1.17.1-3.fc38 copr_base 219 k grep i686 3.8-1.fc38 copr_base 289 k ima-evm-utils i686 1.4-6.fc38 copr_base 63 k json-c i686 0.16-3.fc38 copr_base 44 k keyutils-libs i686 1.6.1-5.fc38 copr_base 32 k krb5-libs i686 1.20.1-3.fc38 copr_base 764 k libacl i686 2.3.1-4.fc38 copr_base 25 k libarchive i686 3.6.1-3.fc38 copr_base 442 k libassuan i686 2.5.5-5.fc38 copr_base 69 k libattr i686 2.5.1-5.fc38 copr_base 19 k libb2 i686 0.98.1-7.fc38 copr_base 29 k libblkid i686 2.38.1-3.fc38 local 116 k libbrotli i686 1.0.9-9.fc38 copr_base 318 k libcap i686 2.48-5.fc38 copr_base 69 k libcap-ng i686 0.8.3-4.fc38 copr_base 33 k libcom_err i686 1.46.5-3.fc37 local 26 k libcomps i686 0.1.18-4.fc38 copr_base 84 k libcurl i686 7.87.0-1.fc38 copr_base 327 k libdnf i686 0.68.0-1.fc38 copr_base 713 k libevent i686 2.1.12-7.fc38 copr_base 277 k libffi i686 3.4.4-1.fc38 copr_base 36 k libfsverity i686 1.4-8.fc38 copr_base 21 k libgcc i686 13.0.0-0.4.fc38 https_jakub_fedorapeople_org_fedora_gcc13_arch 101 k libgcrypt i686 1.10.1-6.fc38 copr_base 479 k libgomp i686 13.0.0-0.4.fc38 https_jakub_fedorapeople_org_fedora_gcc13_arch 304 k libgpg-error i686 1.46-1.fc38 copr_base 226 k libidn2 i686 2.3.4-1.fc38 copr_base 155 k libksba i686 1.6.3-1.fc38 copr_base 161 k libmodulemd i686 2.14.0-4.fc38 copr_base 242 k libmount i686 2.38.1-3.fc38 local 141 k libnghttp2 i686 1.51.0-1.fc38 copr_base 81 k libnsl2 i686 2.0.0-4.fc38 copr_base 32 k libpsl i686 0.21.1-6.fc38 copr_base 66 k librepo i686 1.15.1-1.fc38 copr_base 102 k libreport-filesystem noarch 2.17.6-1.fc38 copr_base 14 k libselinux i686 3.4-6.fc38 copr_base 92 k libsemanage i686 3.4-6.fc38 copr_base 129 k libsepol i686 3.4-4.fc38 copr_base 337 k libsigsegv i686 2.14-3.fc38 copr_base 28 k libsmartcols i686 2.38.1-3.fc38 local 65 k libsolv i686 0.7.22-3.fc38 copr_base 426 k libssh i686 0.10.4-2.fc38 copr_base 223 k libssh-config noarch 0.10.4-2.fc38 copr_base 9.3 k libstdc++ i686 13.0.0-0.4.fc38 https_jakub_fedorapeople_org_fedora_gcc13_arch 857 k libtasn1 i686 4.19.0-1.fc38 copr_base 77 k libtirpc i686 1.3.3-0.fc38 copr_base 101 k libunistring i686 1.0-2.fc38 copr_base 549 k libuuid i686 2.38.1-3.fc38 local 28 k libverto i686 0.3.2-4.fc38 copr_base 22 k libxcrypt i686 4.4.33-5.fc38 copr_base 124 k libxml2 i686 2.10.3-2.fc38 copr_base 744 k libyaml i686 0.2.5-8.fc38 copr_base 62 k libzstd i686 1.5.2-3.fc37 local 274 k lua-libs i686 5.4.4-6.fc38 copr_base 149 k lz4-libs i686 1.9.3-5.fc38 copr_base 72 k mpdecimal i686 2.5.1-4.fc38 copr_base 107 k mpfr i686 4.1.1-2.fc38 copr_base 637 k ncurses-base noarch 6.3-5.20221126.fc38 copr_base 62 k ncurses-libs i686 6.3-5.20221126.fc38 copr_base 351 k nettle i686 3.8-2.fc38 copr_base 426 k npth i686 1.6-10.fc38 copr_base 25 k openldap i686 2.6.3-1.fc38 copr_base 274 k openssl-libs i686 1:3.0.5-6.fc38 copr_base 2.1 M p11-kit i686 0.24.1-5.fc38 copr_base 335 k p11-kit-trust i686 0.24.1-5.fc38 copr_base 136 k pcre2 i686 10.40-1.fc38.1 copr_base 235 k pcre2-syntax noarch 10.40-1.fc38.1 copr_base 143 k popt i686 1.19-1.fc38 local 61 k publicsuffix-list-dafsa noarch 20221208-1.fc38 local 59 k python-pip-wheel noarch 22.3.1-1.fc38 local 1.4 M python-setuptools-wheel noarch 65.5.1-1.fc38 local 715 k python3 i686 3.11.1-1.fc38 local 27 k python3-dateutil noarch 1:2.8.2-4.fc37 local 350 k python3-dbus i686 1.3.2-1.fc38 copr_base 151 k python3-distro noarch 1.8.0-1.fc38 local 45 k python3-dnf noarch 4.14.0-1.fc38 local 567 k python3-dnf-plugins-core noarch 4.3.1-1.fc38 local 263 k python3-gpg i686 1.17.1-3.fc38 copr_base 277 k python3-hawkey i686 0.68.0-1.fc38 copr_base 113 k python3-libcomps i686 0.1.18-4.fc38 copr_base 52 k python3-libdnf i686 0.68.0-1.fc38 copr_base 838 k python3-libs i686 3.11.1-1.fc38 local 9.3 M python3-rpm i686 4.18.0-8.fc38 local 95 k python3-six noarch 1.16.0-8.fc37 local 42 k readline i686 8.2-2.fc38 local 218 k rpm i686 4.18.0-8.fc38 local 543 k rpm-build-libs i686 4.18.0-8.fc38 local 102 k rpm-libs i686 4.18.0-8.fc38 local 341 k rpm-sequoia i686 1.2.0-1.fc38 local 924 k rpm-sign-libs i686 4.18.0-8.fc38 local 27 k sed i686 4.8-11.fc37 local 300 k setup noarch 2.14.3-1.fc38 local 146 k shadow-utils i686 2:4.13-3.fc38 local 1.2 M sqlite-libs i686 3.40.0-1.fc38 local 705 k systemd-libs i686 252.4-598.fc38 local 662 k tpm2-tss i686 4.0.0-0.1.rc2.fc38 local 603 k tzdata noarch 2022g-1.fc38 local 432 k xz-libs i686 5.2.9-1.fc38 local 101 k zchunk-libs i686 1.2.3-1.fc38 local 54 k zlib i686 1.2.13-1.fc38 local 92 k Transaction Summary ========================================================================================================================= Install 137 Packages Total download size: 57 M Installed size: 198 M Downloading Packages: (1/137): bzip2-libs-1.0.8-12.fc38.i686.rpm 279 kB/s | 42 kB 00:00 (2/137): alternatives-1.21-1.fc38.i686.rpm 255 kB/s | 39 kB 00:00 (3/137): bash-5.2.9-3.fc38.i686.rpm 9.6 MB/s | 1.8 MB 00:00 (4/137): coreutils-9.1-8.fc38.i686.rpm 24 MB/s | 1.1 MB 00:00 (5/137): coreutils-common-9.1-8.fc38.i686.rpm 31 MB/s | 2.0 MB 00:00 (6/137): curl-7.87.0-1.fc38.i686.rpm 12 MB/s | 347 kB 00:00 (7/137): cyrus-sasl-lib-2.1.28-8.fc38.i686.rpm 22 MB/s | 858 kB 00:00 (8/137): dbus-libs-1.14.4-1.fc38.i686.rpm 9.0 MB/s | 167 kB 00:00 (9/137): elfutils-default-yama-scope-0.188-3.fc 923 kB/s | 16 kB 00:00 (10/137): elfutils-libelf-0.188-3.fc38.i686.rpm 19 MB/s | 204 kB 00:00 (11/137): elfutils-libs-0.188-3.fc38.i686.rpm 21 MB/s | 287 kB 00:00 (12/137): expat-2.5.0-1.fc38.i686.rpm 8.1 MB/s | 115 kB 00:00 (13/137): file-libs-5.42-4.fc38.i686.rpm 45 MB/s | 684 kB 00:00 (14/137): findutils-4.9.0-2.fc38.i686.rpm 29 MB/s | 494 kB 00:00 (15/137): gawk-5.1.1-4.fc38.i686.rpm 22 MB/s | 1.0 MB 00:00 (16/137): gdbm-libs-1.23-2.fc38.i686.rpm 1.8 MB/s | 60 kB 00:00 (17/137): glib2-2.74.1-2.fc38.i686.rpm 72 MB/s | 2.8 MB 00:00 (18/137): gmp-6.2.1-3.fc38.i686.rpm 26 MB/s | 306 kB 00:00 (19/137): gnupg2-2.3.8-1.fc38.i686.rpm 54 MB/s | 2.6 MB 00:00 (20/137): gnutls-3.7.8-9.fc38.i686.rpm 26 MB/s | 1.1 MB 00:00 (21/137): gpgme-1.17.1-3.fc38.i686.rpm 5.3 MB/s | 219 kB 00:00 (22/137): grep-3.8-1.fc38.i686.rpm 26 MB/s | 289 kB 00:00 (23/137): ima-evm-utils-1.4-6.fc38.i686.rpm 6.2 MB/s | 63 kB 00:00 (24/137): json-c-0.16-3.fc38.i686.rpm 4.2 MB/s | 44 kB 00:00 (25/137): keyutils-libs-1.6.1-5.fc38.i686.rpm 3.8 MB/s | 32 kB 00:00 (26/137): krb5-libs-1.20.1-3.fc38.i686.rpm 47 MB/s | 764 kB 00:00 (27/137): libacl-2.3.1-4.fc38.i686.rpm 1.5 MB/s | 25 kB 00:00 (28/137): libarchive-3.6.1-3.fc38.i686.rpm 33 MB/s | 442 kB 00:00 (29/137): libassuan-2.5.5-5.fc38.i686.rpm 6.3 MB/s | 69 kB 00:00 (30/137): libattr-2.5.1-5.fc38.i686.rpm 1.7 MB/s | 19 kB 00:00 (31/137): libb2-0.98.1-7.fc38.i686.rpm 3.4 MB/s | 29 kB 00:00 (32/137): libbrotli-1.0.9-9.fc38.i686.rpm 28 MB/s | 318 kB 00:00 (33/137): libcap-2.48-5.fc38.i686.rpm 5.9 MB/s | 69 kB 00:00 (34/137): libcap-ng-0.8.3-4.fc38.i686.rpm 3.3 MB/s | 33 kB 00:00 (35/137): libcomps-0.1.18-4.fc38.i686.rpm 9.3 MB/s | 84 kB 00:00 (36/137): libcurl-7.87.0-1.fc38.i686.rpm 27 MB/s | 327 kB 00:00 (37/137): libdnf-0.68.0-1.fc38.i686.rpm 39 MB/s | 713 kB 00:00 (38/137): libevent-2.1.12-7.fc38.i686.rpm 23 MB/s | 277 kB 00:00 (39/137): libffi-3.4.4-1.fc38.i686.rpm 4.0 MB/s | 36 kB 00:00 (40/137): libfsverity-1.4-8.fc38.i686.rpm 2.5 MB/s | 21 kB 00:00 (41/137): libgcrypt-1.10.1-6.fc38.i686.rpm 37 MB/s | 479 kB 00:00 (42/137): libgpg-error-1.46-1.fc38.i686.rpm 16 MB/s | 226 kB 00:00 (43/137): libidn2-2.3.4-1.fc38.i686.rpm 16 MB/s | 155 kB 00:00 (44/137): libksba-1.6.3-1.fc38.i686.rpm 16 MB/s | 161 kB 00:00 (45/137): libmodulemd-2.14.0-4.fc38.i686.rpm 22 MB/s | 242 kB 00:00 (46/137): libnghttp2-1.51.0-1.fc38.i686.rpm 7.9 MB/s | 81 kB 00:00 (47/137): libnsl2-2.0.0-4.fc38.i686.rpm 3.7 MB/s | 32 kB 00:00 (48/137): libpsl-0.21.1-6.fc38.i686.rpm 7.0 MB/s | 66 kB 00:00 (49/137): librepo-1.15.1-1.fc38.i686.rpm 10 MB/s | 102 kB 00:00 (50/137): libreport-filesystem-2.17.6-1.fc38.no 1.6 MB/s | 14 kB 00:00 (51/137): libselinux-3.4-6.fc38.i686.rpm 8.8 MB/s | 92 kB 00:00 (52/137): libsemanage-3.4-6.fc38.i686.rpm 12 MB/s | 129 kB 00:00 (53/137): libsepol-3.4-4.fc38.i686.rpm 29 MB/s | 337 kB 00:00 (54/137): libsigsegv-2.14-3.fc38.i686.rpm 3.3 MB/s | 28 kB 00:00 (55/137): libsolv-0.7.22-3.fc38.i686.rpm 34 MB/s | 426 kB 00:00 (56/137): libssh-0.10.4-2.fc38.i686.rpm 21 MB/s | 223 kB 00:00 (57/137): libssh-config-0.10.4-2.fc38.noarch.rp 1.1 MB/s | 9.3 kB 00:00 (58/137): libtasn1-4.19.0-1.fc38.i686.rpm 8.6 MB/s | 77 kB 00:00 (59/137): libtirpc-1.3.3-0.fc38.i686.rpm 11 MB/s | 101 kB 00:00 (60/137): libunistring-1.0-2.fc38.i686.rpm 38 MB/s | 549 kB 00:00 (61/137): libverto-0.3.2-4.fc38.i686.rpm 2.2 MB/s | 22 kB 00:00 (62/137): libxcrypt-4.4.33-5.fc38.i686.rpm 13 MB/s | 124 kB 00:00 (63/137): libxml2-2.10.3-2.fc38.i686.rpm 47 MB/s | 744 kB 00:00 (64/137): libyaml-0.2.5-8.fc38.i686.rpm 3.8 MB/s | 62 kB 00:00 (65/137): lua-libs-5.4.4-6.fc38.i686.rpm 7.2 MB/s | 149 kB 00:00 (66/137): lz4-libs-1.9.3-5.fc38.i686.rpm 7.9 MB/s | 72 kB 00:00 (67/137): mpdecimal-2.5.1-4.fc38.i686.rpm 11 MB/s | 107 kB 00:00 (68/137): mpfr-4.1.1-2.fc38.i686.rpm 41 MB/s | 637 kB 00:00 (69/137): ncurses-base-6.3-5.20221126.fc38.noar 3.9 MB/s | 62 kB 00:00 (70/137): ncurses-libs-6.3-5.20221126.fc38.i686 20 MB/s | 351 kB 00:00 (71/137): nettle-3.8-2.fc38.i686.rpm 33 MB/s | 426 kB 00:00 (72/137): npth-1.6-10.fc38.i686.rpm 1.9 MB/s | 25 kB 00:00 (73/137): openldap-2.6.3-1.fc38.i686.rpm 22 MB/s | 274 kB 00:00 (74/137): openssl-libs-3.0.5-6.fc38.i686.rpm 58 MB/s | 2.1 MB 00:00 (75/137): p11-kit-0.24.1-5.fc38.i686.rpm 8.2 MB/s | 335 kB 00:00 (76/137): p11-kit-trust-0.24.1-5.fc38.i686.rpm 3.4 MB/s | 136 kB 00:00 (77/137): pcre2-10.40-1.fc38.1.i686.rpm 22 MB/s | 235 kB 00:00 (78/137): pcre2-syntax-10.40-1.fc38.1.noarch.rp 14 MB/s | 143 kB 00:00 (79/137): python3-dbus-1.3.2-1.fc38.i686.rpm 14 MB/s | 151 kB 00:00 (80/137): python3-gpg-1.17.1-3.fc38.i686.rpm 25 MB/s | 277 kB 00:00 (81/137): python3-hawkey-0.68.0-1.fc38.i686.rpm 12 MB/s | 113 kB 00:00 (82/137): python3-libcomps-0.1.18-4.fc38.i686.r 5.8 MB/s | 52 kB 00:00 (83/137): python3-libdnf-0.68.0-1.fc38.i686.rpm 50 MB/s | 838 kB 00:00 (84/137): libgcc-13.0.0-0.4.fc38.i686.rpm 444 kB/s | 101 kB 00:00 (85/137): libgomp-13.0.0-0.4.fc38.i686.rpm 1.1 MB/s | 304 kB 00:00 (86/137): libstdc++-13.0.0-0.4.fc38.i686.rpm 2.6 MB/s | 857 kB 00:00 (87/137): basesystem-11-14.fc37.noarch.rpm 72 kB/s | 7.0 kB 00:00 (88/137): audit-libs-3.0.9-2.fc38.i686.rpm 668 kB/s | 122 kB 00:00 (89/137): crypto-policies-20221215-1.gita4c31a3 1.5 MB/s | 63 kB 00:00 (90/137): dnf-data-4.14.0-1.fc38.noarch.rpm 1.8 MB/s | 43 kB 00:00 (91/137): dnf-plugins-core-4.3.1-1.fc38.noarch. 1.4 MB/s | 34 kB 00:00 (92/137): dnf-4.14.0-1.fc38.noarch.rpm 7.3 MB/s | 469 kB 00:00 (93/137): fedora-release-38-0.6.noarch.rpm 435 kB/s | 11 kB 00:00 (94/137): fedora-gpg-keys-38-0.3.noarch.rpm 2.4 MB/s | 115 kB 00:00 (95/137): fedora-release-common-38-0.6.noarch.r 917 kB/s | 21 kB 00:00 (96/137): fedora-release-identity-basic-38-0.6. 505 kB/s | 11 kB 00:00 (97/137): fedora-repos-38-0.3.noarch.rpm 469 kB/s | 10 kB 00:00 (98/137): fedora-repos-rawhide-38-0.3.noarch.rp 447 kB/s | 9.7 kB 00:00 (99/137): ca-certificates-2022.2.54-5.fc37.noar 3.1 MB/s | 829 kB 00:00 (100/137): filesystem-3.18-2.fc37.i686.rpm 17 MB/s | 1.1 MB 00:00 (101/137): glibc-minimal-langpack-2.36.9000-19. 1.0 MB/s | 30 kB 00:00 (102/137): libblkid-2.38.1-3.fc38.i686.rpm 3.8 MB/s | 116 kB 00:00 (103/137): glibc-common-2.36.9000-19.fc38.i686. 3.7 MB/s | 315 kB 00:00 (104/137): libcom_err-1.46.5-3.fc37.i686.rpm 976 kB/s | 26 kB 00:00 (105/137): libmount-2.38.1-3.fc38.i686.rpm 5.0 MB/s | 141 kB 00:00 (106/137): libsmartcols-2.38.1-3.fc38.i686.rpm 2.5 MB/s | 65 kB 00:00 (107/137): libuuid-2.38.1-3.fc38.i686.rpm 1.1 MB/s | 28 kB 00:00 (108/137): libzstd-1.5.2-3.fc37.i686.rpm 8.1 MB/s | 274 kB 00:00 (109/137): popt-1.19-1.fc38.i686.rpm 2.1 MB/s | 61 kB 00:00 (110/137): publicsuffix-list-dafsa-20221208-1.f 2.2 MB/s | 59 kB 00:00 (111/137): python-setuptools-wheel-65.5.1-1.fc3 17 MB/s | 715 kB 00:00 (112/137): python3-3.11.1-1.fc38.i686.rpm 855 kB/s | 27 kB 00:00 (113/137): python3-dateutil-2.8.2-4.fc37.noarch 10 MB/s | 350 kB 00:00 (114/137): glibc-2.36.9000-19.fc38.i686.rpm 5.1 MB/s | 1.9 MB 00:00 (115/137): python3-distro-1.8.0-1.fc38.noarch.r 1.3 MB/s | 45 kB 00:00 (116/137): python3-dnf-plugins-core-4.3.1-1.fc3 7.4 MB/s | 263 kB 00:00 (117/137): python-pip-wheel-22.3.1-1.fc38.noarc 6.4 MB/s | 1.4 MB 00:00 (118/137): python3-dnf-4.14.0-1.fc38.noarch.rpm 5.7 MB/s | 567 kB 00:00 (119/137): python3-rpm-4.18.0-8.fc38.i686.rpm 2.5 MB/s | 95 kB 00:00 (120/137): python3-six-1.16.0-8.fc37.noarch.rpm 1.0 MB/s | 42 kB 00:00 (121/137): readline-8.2-2.fc38.i686.rpm 4.3 MB/s | 218 kB 00:00 (122/137): rpm-build-libs-4.18.0-8.fc38.i686.rp 2.1 MB/s | 102 kB 00:00 (123/137): rpm-4.18.0-8.fc38.i686.rpm 4.0 MB/s | 543 kB 00:00 (124/137): rpm-libs-4.18.0-8.fc38.i686.rpm 3.5 MB/s | 341 kB 00:00 (125/137): rpm-sign-libs-4.18.0-8.fc38.i686.rpm 591 kB/s | 27 kB 00:00 (126/137): python3-libs-3.11.1-1.fc38.i686.rpm 29 MB/s | 9.3 MB 00:00 (127/137): setup-2.14.3-1.fc38.noarch.rpm 4.4 MB/s | 146 kB 00:00 (128/137): sed-4.8-11.fc37.i686.rpm 4.5 MB/s | 300 kB 00:00 (129/137): rpm-sequoia-1.2.0-1.fc38.i686.rpm 6.2 MB/s | 924 kB 00:00 (130/137): shadow-utils-4.13-3.fc38.i686.rpm 22 MB/s | 1.2 MB 00:00 (131/137): tpm2-tss-4.0.0-0.1.rc2.fc38.i686.rpm 12 MB/s | 603 kB 00:00 (132/137): sqlite-libs-3.40.0-1.fc38.i686.rpm 6.3 MB/s | 705 kB 00:00 (133/137): systemd-libs-252.4-598.fc38.i686.rpm 6.1 MB/s | 662 kB 00:00 (134/137): tzdata-2022g-1.fc38.noarch.rpm 10 MB/s | 432 kB 00:00 (135/137): xz-libs-5.2.9-1.fc38.i686.rpm 3.0 MB/s | 101 kB 00:00 (136/137): zchunk-libs-1.2.3-1.fc38.i686.rpm 1.8 MB/s | 54 kB 00:00 (137/137): zlib-1.2.13-1.fc38.i686.rpm 2.9 MB/s | 92 kB 00:00 -------------------------------------------------------------------------------- Total 27 MB/s | 57 MB 00:02 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Running scriptlet: filesystem-3.18-2.fc37.i686 1/1 Preparing : 1/1 Installing : crypto-policies-20221215-1.gita4c31a3.fc38.noarc 1/137 Running scriptlet: crypto-policies-20221215-1.gita4c31a3.fc38.noarc 1/137 Installing : tzdata-2022g-1.fc38.noarch 2/137 Installing : fedora-release-identity-basic-38-0.6.noarch 3/137 Installing : python-setuptools-wheel-65.5.1-1.fc38.noarch 4/137 Installing : publicsuffix-list-dafsa-20221208-1.fc38.noarch 5/137 Installing : fedora-gpg-keys-38-0.3.noarch 6/137 Installing : fedora-release-38-0.6.noarch 7/137 Installing : fedora-release-common-38-0.6.noarch 8/137 Installing : fedora-repos-rawhide-38-0.3.noarch 9/137 Installing : fedora-repos-38-0.3.noarch 10/137 Installing : setup-2.14.3-1.fc38.noarch 11/137 Running scriptlet: setup-2.14.3-1.fc38.noarch 11/137 Installing : filesystem-3.18-2.fc37.i686 12/137 Installing : basesystem-11-14.fc37.noarch 13/137 Installing : pcre2-syntax-10.40-1.fc38.1.noarch 14/137 Installing : ncurses-base-6.3-5.20221126.fc38.noarch 15/137 Installing : libssh-config-0.10.4-2.fc38.noarch 16/137 Installing : libreport-filesystem-2.17.6-1.fc38.noarch 17/137 Installing : dnf-data-4.14.0-1.fc38.noarch 18/137 warning: /etc/dnf/dnf.conf created as /etc/dnf/dnf.conf.rpmnew Installing : coreutils-common-9.1-8.fc38.i686 19/137 Installing : libgcc-13.0.0-0.4.fc38.i686 20/137 Running scriptlet: libgcc-13.0.0-0.4.fc38.i686 20/137 Installing : ncurses-libs-6.3-5.20221126.fc38.i686 21/137 Running scriptlet: glibc-2.36.9000-19.fc38.i686 22/137 Installing : glibc-2.36.9000-19.fc38.i686 22/137 Running scriptlet: glibc-2.36.9000-19.fc38.i686 22/137 Installing : bash-5.2.9-3.fc38.i686 23/137 Running scriptlet: bash-5.2.9-3.fc38.i686 23/137 Installing : glibc-common-2.36.9000-19.fc38.i686 24/137 Installing : glibc-minimal-langpack-2.36.9000-19.fc38.i686 25/137 Installing : zlib-1.2.13-1.fc38.i686 26/137 Installing : bzip2-libs-1.0.8-12.fc38.i686 27/137 Installing : xz-libs-5.2.9-1.fc38.i686 28/137 Installing : libzstd-1.5.2-3.fc37.i686 29/137 Installing : sqlite-libs-3.40.0-1.fc38.i686 30/137 Installing : gmp-1:6.2.1-3.fc38.i686 31/137 Installing : libcap-2.48-5.fc38.i686 32/137 Installing : libgpg-error-1.46-1.fc38.i686 33/137 Installing : popt-1.19-1.fc38.i686 34/137 Installing : libxml2-2.10.3-2.fc38.i686 35/137 Installing : lua-libs-5.4.4-6.fc38.i686 36/137 Installing : libstdc++-13.0.0-0.4.fc38.i686 37/137 Installing : libuuid-2.38.1-3.fc38.i686 38/137 Installing : elfutils-libelf-0.188-3.fc38.i686 39/137 Installing : file-libs-5.42-4.fc38.i686 40/137 Installing : libattr-2.5.1-5.fc38.i686 41/137 Installing : libacl-2.3.1-4.fc38.i686 42/137 Installing : libffi-3.4.4-1.fc38.i686 43/137 Installing : p11-kit-0.24.1-5.fc38.i686 44/137 Installing : libunistring-1.0-2.fc38.i686 45/137 Installing : libidn2-2.3.4-1.fc38.i686 46/137 Installing : libxcrypt-4.4.33-5.fc38.i686 47/137 Installing : pcre2-10.40-1.fc38.1.i686 48/137 Installing : readline-8.2-2.fc38.i686 49/137 Installing : libassuan-2.5.5-5.fc38.i686 50/137 Installing : nettle-3.8-2.fc38.i686 51/137 Installing : rpm-sequoia-1.2.0-1.fc38.i686 52/137 Installing : expat-2.5.0-1.fc38.i686 53/137 Installing : gdbm-libs-1:1.23-2.fc38.i686 54/137 Installing : json-c-0.16-3.fc38.i686 55/137 Installing : keyutils-libs-1.6.1-5.fc38.i686 56/137 Installing : libsepol-3.4-4.fc38.i686 57/137 Installing : libselinux-3.4-6.fc38.i686 58/137 Installing : sed-4.8-11.fc37.i686 59/137 Installing : libtasn1-4.19.0-1.fc38.i686 60/137 Installing : lz4-libs-1.9.3-5.fc38.i686 61/137 Installing : libgomp-13.0.0-0.4.fc38.i686 62/137 Installing : libcom_err-1.46.5-3.fc37.i686 63/137 Installing : libsmartcols-2.38.1-3.fc38.i686 64/137 Installing : elfutils-default-yama-scope-0.188-3.fc38.noarch 65/137 Running scriptlet: elfutils-default-yama-scope-0.188-3.fc38.noarch 65/137 Installing : elfutils-libs-0.188-3.fc38.i686 66/137 Installing : libb2-0.98.1-7.fc38.i686 67/137 Installing : systemd-libs-252.4-598.fc38.i686 68/137 Installing : dbus-libs-1:1.14.4-1.fc38.i686 69/137 Installing : findutils-1:4.9.0-2.fc38.i686 70/137 Installing : cyrus-sasl-lib-2.1.28-8.fc38.i686 71/137 Installing : libcomps-0.1.18-4.fc38.i686 72/137 Installing : grep-3.8-1.fc38.i686 73/137 Installing : libpsl-0.21.1-6.fc38.i686 74/137 Installing : libblkid-2.38.1-3.fc38.i686 75/137 Installing : libmount-2.38.1-3.fc38.i686 76/137 Installing : mpdecimal-2.5.1-4.fc38.i686 77/137 Installing : libgcrypt-1.10.1-6.fc38.i686 78/137 Installing : libksba-1.6.3-1.fc38.i686 79/137 Installing : mpfr-4.1.1-2.fc38.i686 80/137 Installing : alternatives-1.21-1.fc38.i686 81/137 Installing : p11-kit-trust-0.24.1-5.fc38.i686 82/137 Running scriptlet: p11-kit-trust-0.24.1-5.fc38.i686 82/137 Installing : openssl-libs-1:3.0.5-6.fc38.i686 83/137 Installing : coreutils-9.1-8.fc38.i686 84/137 Running scriptlet: ca-certificates-2022.2.54-5.fc37.noarch 85/137 Installing : ca-certificates-2022.2.54-5.fc37.noarch 85/137 Running scriptlet: ca-certificates-2022.2.54-5.fc37.noarch 85/137 Installing : libfsverity-1.4-8.fc38.i686 86/137 Installing : zchunk-libs-1.2.3-1.fc38.i686 87/137 Installing : gnutls-3.7.8-9.fc38.i686 88/137 Installing : python-pip-wheel-22.3.1-1.fc38.noarch 89/137 Installing : glib2-2.74.1-2.fc38.i686 90/137 Installing : libarchive-3.6.1-3.fc38.i686 91/137 Installing : libevent-2.1.12-7.fc38.i686 92/137 Installing : openldap-2.6.3-1.fc38.i686 93/137 Installing : libbrotli-1.0.9-9.fc38.i686 94/137 Installing : libcap-ng-0.8.3-4.fc38.i686 95/137 Installing : audit-libs-3.0.9-2.fc38.i686 96/137 Installing : rpm-libs-4.18.0-8.fc38.i686 97/137 Installing : libsolv-0.7.22-3.fc38.i686 98/137 Installing : rpm-build-libs-4.18.0-8.fc38.i686 99/137 Installing : libsemanage-3.4-6.fc38.i686 100/137 Installing : shadow-utils-2:4.13-3.fc38.i686 101/137 Installing : libnghttp2-1.51.0-1.fc38.i686 102/137 Installing : libsigsegv-2.14-3.fc38.i686 103/137 Installing : gawk-5.1.1-4.fc38.i686 104/137 Installing : libverto-0.3.2-4.fc38.i686 105/137 Installing : krb5-libs-1.20.1-3.fc38.i686 106/137 Installing : libtirpc-1.3.3-0.fc38.i686 107/137 Installing : libnsl2-2.0.0-4.fc38.i686 108/137 Installing : python3-3.11.1-1.fc38.i686 109/137 Installing : python3-libs-3.11.1-1.fc38.i686 110/137 Installing : python3-distro-1.8.0-1.fc38.noarch 111/137 Installing : python3-six-1.16.0-8.fc37.noarch 112/137 Installing : python3-dbus-1.3.2-1.fc38.i686 113/137 Installing : python3-dateutil-1:2.8.2-4.fc37.noarch 114/137 Installing : python3-libcomps-0.1.18-4.fc38.i686 115/137 Installing : libssh-0.10.4-2.fc38.i686 116/137 Installing : libcurl-7.87.0-1.fc38.i686 117/137 Installing : curl-7.87.0-1.fc38.i686 118/137 Running scriptlet: tpm2-tss-4.0.0-0.1.rc2.fc38.i686 119/137 useradd: Warning: missing or non-executable shell '/usr/sbin/nologin' Installing : tpm2-tss-4.0.0-0.1.rc2.fc38.i686 119/137 Installing : ima-evm-utils-1.4-6.fc38.i686 120/137 Installing : libyaml-0.2.5-8.fc38.i686 121/137 Installing : libmodulemd-2.14.0-4.fc38.i686 122/137 Installing : npth-1.6-10.fc38.i686 123/137 Installing : gnupg2-2.3.8-1.fc38.i686 124/137 Installing : gpgme-1.17.1-3.fc38.i686 125/137 Installing : librepo-1.15.1-1.fc38.i686 126/137 Installing : libdnf-0.68.0-1.fc38.i686 127/137 Installing : python3-libdnf-0.68.0-1.fc38.i686 128/137 Installing : python3-hawkey-0.68.0-1.fc38.i686 129/137 Installing : python3-gpg-1.17.1-3.fc38.i686 130/137 Installing : rpm-sign-libs-4.18.0-8.fc38.i686 131/137 Installing : python3-rpm-4.18.0-8.fc38.i686 132/137 Installing : python3-dnf-4.14.0-1.fc38.noarch 133/137 Installing : python3-dnf-plugins-core-4.3.1-1.fc38.noarch 134/137 Installing : dnf-plugins-core-4.3.1-1.fc38.noarch 135/137 Installing : dnf-4.14.0-1.fc38.noarch 136/137 Running scriptlet: dnf-4.14.0-1.fc38.noarch 136/137 Running scriptlet: rpm-4.18.0-8.fc38.i686 137/137 Installing : rpm-4.18.0-8.fc38.i686 137/137 Running scriptlet: filesystem-3.18-2.fc37.i686 137/137 Running scriptlet: ca-certificates-2022.2.54-5.fc37.noarch 137/137 Running scriptlet: rpm-4.18.0-8.fc38.i686 137/137 Verifying : alternatives-1.21-1.fc38.i686 1/137 Verifying : bash-5.2.9-3.fc38.i686 2/137 Verifying : bzip2-libs-1.0.8-12.fc38.i686 3/137 Verifying : coreutils-9.1-8.fc38.i686 4/137 Verifying : coreutils-common-9.1-8.fc38.i686 5/137 Verifying : curl-7.87.0-1.fc38.i686 6/137 Verifying : cyrus-sasl-lib-2.1.28-8.fc38.i686 7/137 Verifying : dbus-libs-1:1.14.4-1.fc38.i686 8/137 Verifying : elfutils-default-yama-scope-0.188-3.fc38.noarch 9/137 Verifying : elfutils-libelf-0.188-3.fc38.i686 10/137 Verifying : elfutils-libs-0.188-3.fc38.i686 11/137 Verifying : expat-2.5.0-1.fc38.i686 12/137 Verifying : file-libs-5.42-4.fc38.i686 13/137 Verifying : findutils-1:4.9.0-2.fc38.i686 14/137 Verifying : gawk-5.1.1-4.fc38.i686 15/137 Verifying : gdbm-libs-1:1.23-2.fc38.i686 16/137 Verifying : glib2-2.74.1-2.fc38.i686 17/137 Verifying : gmp-1:6.2.1-3.fc38.i686 18/137 Verifying : gnupg2-2.3.8-1.fc38.i686 19/137 Verifying : gnutls-3.7.8-9.fc38.i686 20/137 Verifying : gpgme-1.17.1-3.fc38.i686 21/137 Verifying : grep-3.8-1.fc38.i686 22/137 Verifying : ima-evm-utils-1.4-6.fc38.i686 23/137 Verifying : json-c-0.16-3.fc38.i686 24/137 Verifying : keyutils-libs-1.6.1-5.fc38.i686 25/137 Verifying : krb5-libs-1.20.1-3.fc38.i686 26/137 Verifying : libacl-2.3.1-4.fc38.i686 27/137 Verifying : libarchive-3.6.1-3.fc38.i686 28/137 Verifying : libassuan-2.5.5-5.fc38.i686 29/137 Verifying : libattr-2.5.1-5.fc38.i686 30/137 Verifying : libb2-0.98.1-7.fc38.i686 31/137 Verifying : libbrotli-1.0.9-9.fc38.i686 32/137 Verifying : libcap-2.48-5.fc38.i686 33/137 Verifying : libcap-ng-0.8.3-4.fc38.i686 34/137 Verifying : libcomps-0.1.18-4.fc38.i686 35/137 Verifying : libcurl-7.87.0-1.fc38.i686 36/137 Verifying : libdnf-0.68.0-1.fc38.i686 37/137 Verifying : libevent-2.1.12-7.fc38.i686 38/137 Verifying : libffi-3.4.4-1.fc38.i686 39/137 Verifying : libfsverity-1.4-8.fc38.i686 40/137 Verifying : libgcrypt-1.10.1-6.fc38.i686 41/137 Verifying : libgpg-error-1.46-1.fc38.i686 42/137 Verifying : libidn2-2.3.4-1.fc38.i686 43/137 Verifying : libksba-1.6.3-1.fc38.i686 44/137 Verifying : libmodulemd-2.14.0-4.fc38.i686 45/137 Verifying : libnghttp2-1.51.0-1.fc38.i686 46/137 Verifying : libnsl2-2.0.0-4.fc38.i686 47/137 Verifying : libpsl-0.21.1-6.fc38.i686 48/137 Verifying : librepo-1.15.1-1.fc38.i686 49/137 Verifying : libreport-filesystem-2.17.6-1.fc38.noarch 50/137 Verifying : libselinux-3.4-6.fc38.i686 51/137 Verifying : libsemanage-3.4-6.fc38.i686 52/137 Verifying : libsepol-3.4-4.fc38.i686 53/137 Verifying : libsigsegv-2.14-3.fc38.i686 54/137 Verifying : libsolv-0.7.22-3.fc38.i686 55/137 Verifying : libssh-0.10.4-2.fc38.i686 56/137 Verifying : libssh-config-0.10.4-2.fc38.noarch 57/137 Verifying : libtasn1-4.19.0-1.fc38.i686 58/137 Verifying : libtirpc-1.3.3-0.fc38.i686 59/137 Verifying : libunistring-1.0-2.fc38.i686 60/137 Verifying : libverto-0.3.2-4.fc38.i686 61/137 Verifying : libxcrypt-4.4.33-5.fc38.i686 62/137 Verifying : libxml2-2.10.3-2.fc38.i686 63/137 Verifying : libyaml-0.2.5-8.fc38.i686 64/137 Verifying : lua-libs-5.4.4-6.fc38.i686 65/137 Verifying : lz4-libs-1.9.3-5.fc38.i686 66/137 Verifying : mpdecimal-2.5.1-4.fc38.i686 67/137 Verifying : mpfr-4.1.1-2.fc38.i686 68/137 Verifying : ncurses-base-6.3-5.20221126.fc38.noarch 69/137 Verifying : ncurses-libs-6.3-5.20221126.fc38.i686 70/137 Verifying : nettle-3.8-2.fc38.i686 71/137 Verifying : npth-1.6-10.fc38.i686 72/137 Verifying : openldap-2.6.3-1.fc38.i686 73/137 Verifying : openssl-libs-1:3.0.5-6.fc38.i686 74/137 Verifying : p11-kit-0.24.1-5.fc38.i686 75/137 Verifying : p11-kit-trust-0.24.1-5.fc38.i686 76/137 Verifying : pcre2-10.40-1.fc38.1.i686 77/137 Verifying : pcre2-syntax-10.40-1.fc38.1.noarch 78/137 Verifying : python3-dbus-1.3.2-1.fc38.i686 79/137 Verifying : python3-gpg-1.17.1-3.fc38.i686 80/137 Verifying : python3-hawkey-0.68.0-1.fc38.i686 81/137 Verifying : python3-libcomps-0.1.18-4.fc38.i686 82/137 Verifying : python3-libdnf-0.68.0-1.fc38.i686 83/137 Verifying : libgcc-13.0.0-0.4.fc38.i686 84/137 Verifying : libgomp-13.0.0-0.4.fc38.i686 85/137 Verifying : libstdc++-13.0.0-0.4.fc38.i686 86/137 Verifying : audit-libs-3.0.9-2.fc38.i686 87/137 Verifying : basesystem-11-14.fc37.noarch 88/137 Verifying : ca-certificates-2022.2.54-5.fc37.noarch 89/137 Verifying : crypto-policies-20221215-1.gita4c31a3.fc38.noarc 90/137 Verifying : dnf-4.14.0-1.fc38.noarch 91/137 Verifying : dnf-data-4.14.0-1.fc38.noarch 92/137 Verifying : dnf-plugins-core-4.3.1-1.fc38.noarch 93/137 Verifying : fedora-gpg-keys-38-0.3.noarch 94/137 Verifying : fedora-release-38-0.6.noarch 95/137 Verifying : fedora-release-common-38-0.6.noarch 96/137 Verifying : fedora-release-identity-basic-38-0.6.noarch 97/137 Verifying : fedora-repos-38-0.3.noarch 98/137 Verifying : fedora-repos-rawhide-38-0.3.noarch 99/137 Verifying : filesystem-3.18-2.fc37.i686 100/137 Verifying : glibc-2.36.9000-19.fc38.i686 101/137 Verifying : glibc-common-2.36.9000-19.fc38.i686 102/137 Verifying : glibc-minimal-langpack-2.36.9000-19.fc38.i686 103/137 Verifying : libblkid-2.38.1-3.fc38.i686 104/137 Verifying : libcom_err-1.46.5-3.fc37.i686 105/137 Verifying : libmount-2.38.1-3.fc38.i686 106/137 Verifying : libsmartcols-2.38.1-3.fc38.i686 107/137 Verifying : libuuid-2.38.1-3.fc38.i686 108/137 Verifying : libzstd-1.5.2-3.fc37.i686 109/137 Verifying : popt-1.19-1.fc38.i686 110/137 Verifying : publicsuffix-list-dafsa-20221208-1.fc38.noarch 111/137 Verifying : python-pip-wheel-22.3.1-1.fc38.noarch 112/137 Verifying : python-setuptools-wheel-65.5.1-1.fc38.noarch 113/137 Verifying : python3-3.11.1-1.fc38.i686 114/137 Verifying : python3-dateutil-1:2.8.2-4.fc37.noarch 115/137 Verifying : python3-distro-1.8.0-1.fc38.noarch 116/137 Verifying : python3-dnf-4.14.0-1.fc38.noarch 117/137 Verifying : python3-dnf-plugins-core-4.3.1-1.fc38.noarch 118/137 Verifying : python3-libs-3.11.1-1.fc38.i686 119/137 Verifying : python3-rpm-4.18.0-8.fc38.i686 120/137 Verifying : python3-six-1.16.0-8.fc37.noarch 121/137 Verifying : readline-8.2-2.fc38.i686 122/137 Verifying : rpm-4.18.0-8.fc38.i686 123/137 Verifying : rpm-build-libs-4.18.0-8.fc38.i686 124/137 Verifying : rpm-libs-4.18.0-8.fc38.i686 125/137 Verifying : rpm-sequoia-1.2.0-1.fc38.i686 126/137 Verifying : rpm-sign-libs-4.18.0-8.fc38.i686 127/137 Verifying : sed-4.8-11.fc37.i686 128/137 Verifying : setup-2.14.3-1.fc38.noarch 129/137 Verifying : shadow-utils-2:4.13-3.fc38.i686 130/137 Verifying : sqlite-libs-3.40.0-1.fc38.i686 131/137 Verifying : systemd-libs-252.4-598.fc38.i686 132/137 Verifying : tpm2-tss-4.0.0-0.1.rc2.fc38.i686 133/137 Verifying : tzdata-2022g-1.fc38.noarch 134/137 Verifying : xz-libs-5.2.9-1.fc38.i686 135/137 Verifying : zchunk-libs-1.2.3-1.fc38.i686 136/137 Verifying : zlib-1.2.13-1.fc38.i686 137/137 Installed products updated. Installed: alternatives-1.21-1.fc38.i686 audit-libs-3.0.9-2.fc38.i686 basesystem-11-14.fc37.noarch bash-5.2.9-3.fc38.i686 bzip2-libs-1.0.8-12.fc38.i686 ca-certificates-2022.2.54-5.fc37.noarch coreutils-9.1-8.fc38.i686 coreutils-common-9.1-8.fc38.i686 crypto-policies-20221215-1.gita4c31a3.fc38.noarch curl-7.87.0-1.fc38.i686 cyrus-sasl-lib-2.1.28-8.fc38.i686 dbus-libs-1:1.14.4-1.fc38.i686 dnf-4.14.0-1.fc38.noarch dnf-data-4.14.0-1.fc38.noarch dnf-plugins-core-4.3.1-1.fc38.noarch elfutils-default-yama-scope-0.188-3.fc38.noarch elfutils-libelf-0.188-3.fc38.i686 elfutils-libs-0.188-3.fc38.i686 expat-2.5.0-1.fc38.i686 fedora-gpg-keys-38-0.3.noarch fedora-release-38-0.6.noarch fedora-release-common-38-0.6.noarch fedora-release-identity-basic-38-0.6.noarch fedora-repos-38-0.3.noarch fedora-repos-rawhide-38-0.3.noarch file-libs-5.42-4.fc38.i686 filesystem-3.18-2.fc37.i686 findutils-1:4.9.0-2.fc38.i686 gawk-5.1.1-4.fc38.i686 gdbm-libs-1:1.23-2.fc38.i686 glib2-2.74.1-2.fc38.i686 glibc-2.36.9000-19.fc38.i686 glibc-common-2.36.9000-19.fc38.i686 glibc-minimal-langpack-2.36.9000-19.fc38.i686 gmp-1:6.2.1-3.fc38.i686 gnupg2-2.3.8-1.fc38.i686 gnutls-3.7.8-9.fc38.i686 gpgme-1.17.1-3.fc38.i686 grep-3.8-1.fc38.i686 ima-evm-utils-1.4-6.fc38.i686 json-c-0.16-3.fc38.i686 keyutils-libs-1.6.1-5.fc38.i686 krb5-libs-1.20.1-3.fc38.i686 libacl-2.3.1-4.fc38.i686 libarchive-3.6.1-3.fc38.i686 libassuan-2.5.5-5.fc38.i686 libattr-2.5.1-5.fc38.i686 libb2-0.98.1-7.fc38.i686 libblkid-2.38.1-3.fc38.i686 libbrotli-1.0.9-9.fc38.i686 libcap-2.48-5.fc38.i686 libcap-ng-0.8.3-4.fc38.i686 libcom_err-1.46.5-3.fc37.i686 libcomps-0.1.18-4.fc38.i686 libcurl-7.87.0-1.fc38.i686 libdnf-0.68.0-1.fc38.i686 libevent-2.1.12-7.fc38.i686 libffi-3.4.4-1.fc38.i686 libfsverity-1.4-8.fc38.i686 libgcc-13.0.0-0.4.fc38.i686 libgcrypt-1.10.1-6.fc38.i686 libgomp-13.0.0-0.4.fc38.i686 libgpg-error-1.46-1.fc38.i686 libidn2-2.3.4-1.fc38.i686 libksba-1.6.3-1.fc38.i686 libmodulemd-2.14.0-4.fc38.i686 libmount-2.38.1-3.fc38.i686 libnghttp2-1.51.0-1.fc38.i686 libnsl2-2.0.0-4.fc38.i686 libpsl-0.21.1-6.fc38.i686 librepo-1.15.1-1.fc38.i686 libreport-filesystem-2.17.6-1.fc38.noarch libselinux-3.4-6.fc38.i686 libsemanage-3.4-6.fc38.i686 libsepol-3.4-4.fc38.i686 libsigsegv-2.14-3.fc38.i686 libsmartcols-2.38.1-3.fc38.i686 libsolv-0.7.22-3.fc38.i686 libssh-0.10.4-2.fc38.i686 libssh-config-0.10.4-2.fc38.noarch libstdc++-13.0.0-0.4.fc38.i686 libtasn1-4.19.0-1.fc38.i686 libtirpc-1.3.3-0.fc38.i686 libunistring-1.0-2.fc38.i686 libuuid-2.38.1-3.fc38.i686 libverto-0.3.2-4.fc38.i686 libxcrypt-4.4.33-5.fc38.i686 libxml2-2.10.3-2.fc38.i686 libyaml-0.2.5-8.fc38.i686 libzstd-1.5.2-3.fc37.i686 lua-libs-5.4.4-6.fc38.i686 lz4-libs-1.9.3-5.fc38.i686 mpdecimal-2.5.1-4.fc38.i686 mpfr-4.1.1-2.fc38.i686 ncurses-base-6.3-5.20221126.fc38.noarch ncurses-libs-6.3-5.20221126.fc38.i686 nettle-3.8-2.fc38.i686 npth-1.6-10.fc38.i686 openldap-2.6.3-1.fc38.i686 openssl-libs-1:3.0.5-6.fc38.i686 p11-kit-0.24.1-5.fc38.i686 p11-kit-trust-0.24.1-5.fc38.i686 pcre2-10.40-1.fc38.1.i686 pcre2-syntax-10.40-1.fc38.1.noarch popt-1.19-1.fc38.i686 publicsuffix-list-dafsa-20221208-1.fc38.noarch python-pip-wheel-22.3.1-1.fc38.noarch python-setuptools-wheel-65.5.1-1.fc38.noarch python3-3.11.1-1.fc38.i686 python3-dateutil-1:2.8.2-4.fc37.noarch python3-dbus-1.3.2-1.fc38.i686 python3-distro-1.8.0-1.fc38.noarch python3-dnf-4.14.0-1.fc38.noarch python3-dnf-plugins-core-4.3.1-1.fc38.noarch python3-gpg-1.17.1-3.fc38.i686 python3-hawkey-0.68.0-1.fc38.i686 python3-libcomps-0.1.18-4.fc38.i686 python3-libdnf-0.68.0-1.fc38.i686 python3-libs-3.11.1-1.fc38.i686 python3-rpm-4.18.0-8.fc38.i686 python3-six-1.16.0-8.fc37.noarch readline-8.2-2.fc38.i686 rpm-4.18.0-8.fc38.i686 rpm-build-libs-4.18.0-8.fc38.i686 rpm-libs-4.18.0-8.fc38.i686 rpm-sequoia-1.2.0-1.fc38.i686 rpm-sign-libs-4.18.0-8.fc38.i686 sed-4.8-11.fc37.i686 setup-2.14.3-1.fc38.noarch shadow-utils-2:4.13-3.fc38.i686 sqlite-libs-3.40.0-1.fc38.i686 systemd-libs-252.4-598.fc38.i686 tpm2-tss-4.0.0-0.1.rc2.fc38.i686 tzdata-2022g-1.fc38.noarch xz-libs-5.2.9-1.fc38.i686 zchunk-libs-1.2.3-1.fc38.i686 zlib-1.2.13-1.fc38.i686 Complete! Finish(bootstrap): dnf install Start(bootstrap): creating root cache Finish(bootstrap): creating root cache Finish(bootstrap): chroot init Start: chroot init INFO: mounting tmpfs at /var/lib/mock/fedora-rawhide-i686-1672119885.721026/root. INFO: calling preinit hooks INFO: enabled root cache INFO: enabled package manager cache Start: cleaning package manager metadata Finish: cleaning package manager metadata INFO: enabled HW Info plugin Mock Version: 3.5 INFO: Mock Version: 3.5 Start: dnf install No matches found for the following disable plugin patterns: local, spacewalk, versionlock Copr repository 33 MB/s | 29 MB 00:00 Additional repo https_jakub_fedorapeople_org_fe 105 kB/s | 86 kB 00:00 local 7.9 MB/s | 60 MB 00:07 Dependencies resolved. ========================================================================================================================= Package Arch Version Repository Size ========================================================================================================================= Installing group/module packages: bash i686 5.2.9-3.fc38 copr_base 1.8 M bzip2 i686 1.0.8-12.fc38 copr_base 53 k coreutils i686 9.1-8.fc38 copr_base 1.1 M cpio i686 2.13-13.fc38 copr_base 274 k diffutils i686 3.8-3.fc38 copr_base 375 k fedora-release noarch 38-0.6 local 11 k findutils i686 1:4.9.0-2.fc38 copr_base 494 k gawk i686 5.1.1-4.fc38 copr_base 1.0 M glibc-minimal-langpack i686 2.36.9000-19.fc38 local 30 k grep i686 3.8-1.fc38 copr_base 289 k gzip i686 1.12-2.fc38 copr_base 158 k info i686 7.0.1-1.fc38 local 183 k patch i686 2.7.6-17.fc38 copr_base 138 k redhat-rpm-config noarch 235-1.fc38 local 74 k rpm-build i686 4.18.0-8.fc38 local 69 k sed i686 4.8-11.fc37 local 300 k shadow-utils i686 2:4.13-3.fc38 local 1.2 M tar i686 2:1.34-5.fc38 local 892 k unzip i686 6.0-58.fc38 local 177 k util-linux i686 2.38.1-3.fc38 local 2.3 M which i686 2.21-36.fc38 local 42 k xz i686 5.2.9-1.fc38 local 300 k Installing dependencies: alternatives i686 1.21-1.fc38 copr_base 39 k ansible-srpm-macros noarch 1-8.1.fc38 local 8.6 k audit-libs i686 3.0.9-2.fc38 local 122 k authselect i686 1.4.2-1.fc38 copr_base 141 k authselect-libs i686 1.4.2-1.fc38 copr_base 239 k basesystem noarch 11-14.fc37 local 7.0 k binutils i686 2.39-6.fc38 copr_base 5.6 M binutils-gold i686 2.39-6.fc38 copr_base 853 k bzip2-libs i686 1.0.8-12.fc38 copr_base 42 k ca-certificates noarch 2022.2.54-5.fc37 local 829 k coreutils-common i686 9.1-8.fc38 copr_base 2.0 M cracklib i686 2.9.7-30.fc38 copr_base 82 k crypto-policies noarch 20221215-1.gita4c31a3.fc38 local 63 k curl i686 7.87.0-1.fc38 copr_base 347 k cyrus-sasl-lib i686 2.1.28-8.fc38 copr_base 858 k debugedit i686 5.0-5.fc37 local 78 k dwz i686 0.15-1.fc38 copr_base 144 k ed i686 1.18-2.fc38 copr_base 78 k efi-srpm-macros noarch 5-6.fc37 local 22 k elfutils i686 0.188-3.fc38 copr_base 543 k elfutils-debuginfod-client i686 0.188-3.fc38 copr_base 41 k elfutils-default-yama-scope noarch 0.188-3.fc38 copr_base 16 k elfutils-libelf i686 0.188-3.fc38 copr_base 204 k elfutils-libs i686 0.188-3.fc38 copr_base 287 k fedora-gpg-keys noarch 38-0.3 local 115 k fedora-release-common noarch 38-0.6 local 21 k fedora-release-identity-basic noarch 38-0.6 local 11 k fedora-repos noarch 38-0.3 local 10 k fedora-repos-rawhide noarch 38-0.3 local 9.7 k file i686 5.42-4.fc38 copr_base 49 k file-libs i686 5.42-4.fc38 copr_base 684 k filesystem i686 3.18-2.fc37 local 1.1 M fonts-srpm-macros noarch 1:2.0.5-10.fc38 local 26 k fpc-srpm-macros noarch 1.3-6.fc37 local 7.7 k gdb-minimal i686 12.1-10.fc38 local 3.9 M gdbm-libs i686 1:1.23-2.fc38 copr_base 60 k ghc-srpm-macros noarch 1.5.0-7.fc37 local 7.8 k glibc i686 2.36.9000-19.fc38 local 1.9 M glibc-common i686 2.36.9000-19.fc38 local 315 k glibc-gconv-extra i686 2.36.9000-19.fc38 local 1.6 M gmp i686 1:6.2.1-3.fc38 copr_base 306 k gnat-srpm-macros noarch 4-16.fc37 local 8.3 k go-srpm-macros noarch 3.2.0-1.fc38 local 27 k jansson i686 2.13.1-5.fc38 copr_base 47 k kernel-srpm-macros noarch 1.0-15.fc37 local 9.4 k keyutils-libs i686 1.6.1-5.fc38 copr_base 32 k krb5-libs i686 1.20.1-3.fc38 copr_base 764 k libacl i686 2.3.1-4.fc38 copr_base 25 k libarchive i686 3.6.1-3.fc38 copr_base 442 k libattr i686 2.5.1-5.fc38 copr_base 19 k libblkid i686 2.38.1-3.fc38 local 116 k libbrotli i686 1.0.9-9.fc38 copr_base 318 k libcap i686 2.48-5.fc38 copr_base 69 k libcap-ng i686 0.8.3-4.fc38 copr_base 33 k libcom_err i686 1.46.5-3.fc37 local 26 k libcurl i686 7.87.0-1.fc38 copr_base 327 k libdb i686 5.3.28-54.fc38 copr_base 823 k libeconf i686 0.4.0-4.fc38 copr_base 29 k libevent i686 2.1.12-7.fc38 copr_base 277 k libfdisk i686 2.38.1-3.fc38 local 173 k libffi i686 3.4.4-1.fc38 copr_base 36 k libgcc i686 13.0.0-0.4.fc38 https_jakub_fedorapeople_org_fedora_gcc13_arch 101 k libgomp i686 13.0.0-0.4.fc38 https_jakub_fedorapeople_org_fedora_gcc13_arch 304 k libidn2 i686 2.3.4-1.fc38 copr_base 155 k libmount i686 2.38.1-3.fc38 local 141 k libnghttp2 i686 1.51.0-1.fc38 copr_base 81 k libnsl2 i686 2.0.0-4.fc38 copr_base 32 k libpkgconf i686 1.8.0-3.fc37 local 38 k libpsl i686 0.21.1-6.fc38 copr_base 66 k libpwquality i686 1.4.5-1.fc38 local 108 k libselinux i686 3.4-6.fc38 copr_base 92 k libsemanage i686 3.4-6.fc38 copr_base 129 k libsepol i686 3.4-4.fc38 copr_base 337 k libsigsegv i686 2.14-3.fc38 copr_base 28 k libsmartcols i686 2.38.1-3.fc38 local 65 k libssh i686 0.10.4-2.fc38 copr_base 223 k libssh-config noarch 0.10.4-2.fc38 copr_base 9.3 k libstdc++ i686 13.0.0-0.4.fc38 https_jakub_fedorapeople_org_fedora_gcc13_arch 857 k libtasn1 i686 4.19.0-1.fc38 copr_base 77 k libtirpc i686 1.3.3-0.fc38 copr_base 101 k libunistring i686 1.0-2.fc38 copr_base 549 k libutempter i686 1.2.1-7.fc38 copr_base 27 k libuuid i686 2.38.1-3.fc38 local 28 k libverto i686 0.3.2-4.fc38 copr_base 22 k libxcrypt i686 4.4.33-5.fc38 copr_base 124 k libxml2 i686 2.10.3-2.fc38 copr_base 744 k libzstd i686 1.5.2-3.fc37 local 274 k lua-libs i686 5.4.4-6.fc38 copr_base 149 k lua-srpm-macros noarch 1-7.fc37 local 8.8 k lz4-libs i686 1.9.3-5.fc38 copr_base 72 k mpfr i686 4.1.1-2.fc38 copr_base 637 k ncurses-base noarch 6.3-5.20221126.fc38 copr_base 62 k ncurses-libs i686 6.3-5.20221126.fc38 copr_base 351 k nettle i686 3.8-2.fc38 copr_base 426 k nim-srpm-macros noarch 3-7.fc37 local 8.4 k ocaml-srpm-macros noarch 7-2.fc37 local 13 k openblas-srpm-macros noarch 2-12.fc37 local 7.5 k openldap i686 2.6.3-1.fc38 copr_base 274 k openssl-libs i686 1:3.0.5-6.fc38 copr_base 2.1 M p11-kit i686 0.24.1-5.fc38 copr_base 335 k p11-kit-trust i686 0.24.1-5.fc38 copr_base 136 k package-notes-srpm-macros noarch 0.5-6.fc38 local 11 k pam i686 1.5.2-15.fc38 copr_base 536 k pam-libs i686 1.5.2-15.fc38 copr_base 60 k pcre2 i686 10.40-1.fc38.1 copr_base 235 k pcre2-syntax noarch 10.40-1.fc38.1 copr_base 143 k perl-srpm-macros noarch 1-47.fc38 local 8.2 k pkgconf i686 1.8.0-3.fc37 local 42 k pkgconf-m4 noarch 1.8.0-3.fc37 local 14 k pkgconf-pkg-config i686 1.8.0-3.fc37 local 10 k popt i686 1.19-1.fc38 local 61 k publicsuffix-list-dafsa noarch 20221208-1.fc38 local 59 k python-srpm-macros noarch 3.11-6.fc38 local 25 k qt5-srpm-macros noarch 5.15.7-1.fc38 local 7.9 k readline i686 8.2-2.fc38 local 218 k rpm i686 4.18.0-8.fc38 local 543 k rpm-build-libs i686 4.18.0-8.fc38 local 102 k rpm-libs i686 4.18.0-8.fc38 local 341 k rpm-sequoia i686 1.2.0-1.fc38 local 924 k rpmautospec-rpm-macros noarch 0.3.1-1.fc38 local 8.8 k rust-srpm-macros noarch 23-1.fc38 local 9.4 k setup noarch 2.14.3-1.fc38 local 146 k sqlite-libs i686 3.40.0-1.fc38 local 705 k systemd-libs i686 252.4-598.fc38 local 662 k tzdata noarch 2022g-1.fc38 local 432 k util-linux-core i686 2.38.1-3.fc38 local 467 k xxhash-libs i686 0.8.1-3.fc37 local 59 k xz-libs i686 5.2.9-1.fc38 local 101 k zip i686 3.0-35.fc38 local 263 k zlib i686 1.2.13-1.fc38 local 92 k zstd i686 1.5.2-3.fc37 local 418 k Installing Groups: build Transaction Summary ========================================================================================================================= Install 153 Packages Total download size: 53 M Installed size: 179 M Downloading Packages: (1/153): alternatives-1.21-1.fc38.i686.rpm 145 kB/s | 39 kB 00:00 (2/153): authselect-1.4.2-1.fc38.i686.rpm 497 kB/s | 141 kB 00:00 (3/153): authselect-libs-1.4.2-1.fc38.i686.rpm 823 kB/s | 239 kB 00:00 (4/153): bash-5.2.9-3.fc38.i686.rpm 28 MB/s | 1.8 MB 00:00 (5/153): binutils-gold-2.39-6.fc38.i686.rpm 19 MB/s | 853 kB 00:00 (6/153): binutils-2.39-6.fc38.i686.rpm 54 MB/s | 5.6 MB 00:00 (7/153): bzip2-1.0.8-12.fc38.i686.rpm 1.0 MB/s | 53 kB 00:00 (8/153): bzip2-libs-1.0.8-12.fc38.i686.rpm 814 kB/s | 42 kB 00:00 (9/153): coreutils-9.1-8.fc38.i686.rpm 29 MB/s | 1.1 MB 00:00 (10/153): coreutils-common-9.1-8.fc38.i686.rpm 48 MB/s | 2.0 MB 00:00 (11/153): cpio-2.13-13.fc38.i686.rpm 6.3 MB/s | 274 kB 00:00 (12/153): cracklib-2.9.7-30.fc38.i686.rpm 8.5 MB/s | 82 kB 00:00 (13/153): curl-7.87.0-1.fc38.i686.rpm 29 MB/s | 347 kB 00:00 (14/153): cyrus-sasl-lib-2.1.28-8.fc38.i686.rpm 44 MB/s | 858 kB 00:00 (15/153): diffutils-3.8-3.fc38.i686.rpm 24 MB/s | 375 kB 00:00 (16/153): dwz-0.15-1.fc38.i686.rpm 12 MB/s | 144 kB 00:00 (17/153): ed-1.18-2.fc38.i686.rpm 8.7 MB/s | 78 kB 00:00 (18/153): elfutils-0.188-3.fc38.i686.rpm 39 MB/s | 543 kB 00:00 (19/153): elfutils-debuginfod-client-0.188-3.fc 3.0 MB/s | 41 kB 00:00 (20/153): elfutils-default-yama-scope-0.188-3.f 1.8 MB/s | 16 kB 00:00 (21/153): elfutils-libelf-0.188-3.fc38.i686.rpm 20 MB/s | 204 kB 00:00 (22/153): elfutils-libs-0.188-3.fc38.i686.rpm 23 MB/s | 287 kB 00:00 (23/153): file-5.42-4.fc38.i686.rpm 3.9 MB/s | 49 kB 00:00 (24/153): file-libs-5.42-4.fc38.i686.rpm 45 MB/s | 684 kB 00:00 (25/153): findutils-4.9.0-2.fc38.i686.rpm 29 MB/s | 494 kB 00:00 (26/153): gawk-5.1.1-4.fc38.i686.rpm 38 MB/s | 1.0 MB 00:00 (27/153): gdbm-libs-1.23-2.fc38.i686.rpm 4.1 MB/s | 60 kB 00:00 (28/153): gmp-6.2.1-3.fc38.i686.rpm 26 MB/s | 306 kB 00:00 (29/153): grep-3.8-1.fc38.i686.rpm 26 MB/s | 289 kB 00:00 (30/153): gzip-1.12-2.fc38.i686.rpm 14 MB/s | 158 kB 00:00 (31/153): jansson-2.13.1-5.fc38.i686.rpm 4.1 MB/s | 47 kB 00:00 (32/153): keyutils-libs-1.6.1-5.fc38.i686.rpm 3.8 MB/s | 32 kB 00:00 (33/153): krb5-libs-1.20.1-3.fc38.i686.rpm 48 MB/s | 764 kB 00:00 (34/153): libacl-2.3.1-4.fc38.i686.rpm 1.5 MB/s | 25 kB 00:00 (35/153): libarchive-3.6.1-3.fc38.i686.rpm 35 MB/s | 442 kB 00:00 (36/153): libattr-2.5.1-5.fc38.i686.rpm 1.7 MB/s | 19 kB 00:00 (37/153): libbrotli-1.0.9-9.fc38.i686.rpm 20 MB/s | 318 kB 00:00 (38/153): libcap-2.48-5.fc38.i686.rpm 4.6 MB/s | 69 kB 00:00 (39/153): libcap-ng-0.8.3-4.fc38.i686.rpm 3.8 MB/s | 33 kB 00:00 (40/153): libcurl-7.87.0-1.fc38.i686.rpm 29 MB/s | 327 kB 00:00 (41/153): libdb-5.3.28-54.fc38.i686.rpm 47 MB/s | 823 kB 00:00 (42/153): libeconf-0.4.0-4.fc38.i686.rpm 1.7 MB/s | 29 kB 00:00 (43/153): libevent-2.1.12-7.fc38.i686.rpm 26 MB/s | 277 kB 00:00 (44/153): libffi-3.4.4-1.fc38.i686.rpm 3.0 MB/s | 36 kB 00:00 (45/153): libidn2-2.3.4-1.fc38.i686.rpm 12 MB/s | 155 kB 00:00 (46/153): libnghttp2-1.51.0-1.fc38.i686.rpm 7.3 MB/s | 81 kB 00:00 (47/153): libnsl2-2.0.0-4.fc38.i686.rpm 3.8 MB/s | 32 kB 00:00 (48/153): libpsl-0.21.1-6.fc38.i686.rpm 7.7 MB/s | 66 kB 00:00 (49/153): libselinux-3.4-6.fc38.i686.rpm 10 MB/s | 92 kB 00:00 (50/153): libsemanage-3.4-6.fc38.i686.rpm 14 MB/s | 129 kB 00:00 (51/153): libsepol-3.4-4.fc38.i686.rpm 29 MB/s | 337 kB 00:00 (52/153): libsigsegv-2.14-3.fc38.i686.rpm 2.4 MB/s | 28 kB 00:00 (53/153): libssh-0.10.4-2.fc38.i686.rpm 21 MB/s | 223 kB 00:00 (54/153): libssh-config-0.10.4-2.fc38.noarch.rp 1.1 MB/s | 9.3 kB 00:00 (55/153): libtasn1-4.19.0-1.fc38.i686.rpm 8.8 MB/s | 77 kB 00:00 (56/153): libtirpc-1.3.3-0.fc38.i686.rpm 11 MB/s | 101 kB 00:00 (57/153): libunistring-1.0-2.fc38.i686.rpm 40 MB/s | 549 kB 00:00 (58/153): libutempter-1.2.1-7.fc38.i686.rpm 2.0 MB/s | 27 kB 00:00 (59/153): libverto-0.3.2-4.fc38.i686.rpm 2.6 MB/s | 22 kB 00:00 (60/153): libxcrypt-4.4.33-5.fc38.i686.rpm 12 MB/s | 124 kB 00:00 (61/153): libxml2-2.10.3-2.fc38.i686.rpm 44 MB/s | 744 kB 00:00 (62/153): lua-libs-5.4.4-6.fc38.i686.rpm 8.8 MB/s | 149 kB 00:00 (63/153): lz4-libs-1.9.3-5.fc38.i686.rpm 7.9 MB/s | 72 kB 00:00 (64/153): mpfr-4.1.1-2.fc38.i686.rpm 43 MB/s | 637 kB 00:00 (65/153): ncurses-base-6.3-5.20221126.fc38.noar 4.1 MB/s | 62 kB 00:00 (66/153): ncurses-libs-6.3-5.20221126.fc38.i686 22 MB/s | 351 kB 00:00 (67/153): nettle-3.8-2.fc38.i686.rpm 34 MB/s | 426 kB 00:00 (68/153): openldap-2.6.3-1.fc38.i686.rpm 19 MB/s | 274 kB 00:00 (69/153): openssl-libs-3.0.5-6.fc38.i686.rpm 64 MB/s | 2.1 MB 00:00 (70/153): p11-kit-0.24.1-5.fc38.i686.rpm 13 MB/s | 335 kB 00:00 (71/153): p11-kit-trust-0.24.1-5.fc38.i686.rpm 5.8 MB/s | 136 kB 00:00 (72/153): pam-libs-1.5.2-15.fc38.i686.rpm 6.2 MB/s | 60 kB 00:00 (73/153): patch-2.7.6-17.fc38.i686.rpm 13 MB/s | 138 kB 00:00 (74/153): pam-1.5.2-15.fc38.i686.rpm 30 MB/s | 536 kB 00:00 (75/153): pcre2-10.40-1.fc38.1.i686.rpm 18 MB/s | 235 kB 00:00 (76/153): pcre2-syntax-10.40-1.fc38.1.noarch.rp 12 MB/s | 143 kB 00:00 (77/153): libgcc-13.0.0-0.4.fc38.i686.rpm 293 kB/s | 101 kB 00:00 (78/153): libgomp-13.0.0-0.4.fc38.i686.rpm 817 kB/s | 304 kB 00:00 (79/153): libstdc++-13.0.0-0.4.fc38.i686.rpm 2.2 MB/s | 857 kB 00:00 (80/153): ansible-srpm-macros-1-8.1.fc38.noarch 115 kB/s | 8.6 kB 00:00 (81/153): basesystem-11-14.fc37.noarch.rpm 132 kB/s | 7.0 kB 00:00 (82/153): crypto-policies-20221215-1.gita4c31a3 2.0 MB/s | 63 kB 00:00 (83/153): audit-libs-3.0.9-2.fc38.i686.rpm 1.1 MB/s | 122 kB 00:00 (84/153): debugedit-5.0-5.fc37.i686.rpm 3.3 MB/s | 78 kB 00:00 (85/153): efi-srpm-macros-5-6.fc37.noarch.rpm 973 kB/s | 22 kB 00:00 (86/153): ca-certificates-2022.2.54-5.fc37.noar 8.9 MB/s | 829 kB 00:00 (87/153): fedora-release-38-0.6.noarch.rpm 538 kB/s | 11 kB 00:00 (88/153): fedora-release-common-38-0.6.noarch.r 1.0 MB/s | 21 kB 00:00 (89/153): fedora-gpg-keys-38-0.3.noarch.rpm 2.9 MB/s | 115 kB 00:00 (90/153): fedora-repos-38-0.3.noarch.rpm 633 kB/s | 10 kB 00:00 (91/153): fedora-repos-rawhide-38-0.3.noarch.rp 625 kB/s | 9.7 kB 00:00 (92/153): fonts-srpm-macros-2.0.5-10.fc38.noarc 1.3 MB/s | 26 kB 00:00 (93/153): fedora-release-identity-basic-38-0.6. 175 kB/s | 11 kB 00:00 (94/153): fpc-srpm-macros-1.3-6.fc37.noarch.rpm 350 kB/s | 7.7 kB 00:00 (95/153): filesystem-3.18-2.fc37.i686.rpm 18 MB/s | 1.1 MB 00:00 (96/153): ghc-srpm-macros-1.5.0-7.fc37.noarch.r 348 kB/s | 7.8 kB 00:00 (97/153): glibc-common-2.36.9000-19.fc38.i686.r 3.8 MB/s | 315 kB 00:00 (98/153): glibc-2.36.9000-19.fc38.i686.rpm 17 MB/s | 1.9 MB 00:00 (99/153): glibc-minimal-langpack-2.36.9000-19.f 1.1 MB/s | 30 kB 00:00 (100/153): gnat-srpm-macros-4-16.fc37.noarch.rp 367 kB/s | 8.3 kB 00:00 (101/153): go-srpm-macros-3.2.0-1.fc38.noarch.r 1.1 MB/s | 27 kB 00:00 (102/153): info-7.0.1-1.fc38.i686.rpm 6.8 MB/s | 183 kB 00:00 (103/153): kernel-srpm-macros-1.0-15.fc37.noarc 354 kB/s | 9.4 kB 00:00 (104/153): libblkid-2.38.1-3.fc38.i686.rpm 4.4 MB/s | 116 kB 00:00 (105/153): libcom_err-1.46.5-3.fc37.i686.rpm 1.0 MB/s | 26 kB 00:00 (106/153): libfdisk-2.38.1-3.fc38.i686.rpm 6.1 MB/s | 173 kB 00:00 (107/153): glibc-gconv-extra-2.36.9000-19.fc38. 6.8 MB/s | 1.6 MB 00:00 (108/153): libmount-2.38.1-3.fc38.i686.rpm 5.0 MB/s | 141 kB 00:00 (109/153): libpkgconf-1.8.0-3.fc37.i686.rpm 1.4 MB/s | 38 kB 00:00 (110/153): gdb-minimal-12.1-10.fc38.i686.rpm 10 MB/s | 3.9 MB 00:00 (111/153): libpwquality-1.4.5-1.fc38.i686.rpm 3.7 MB/s | 108 kB 00:00 (112/153): libsmartcols-2.38.1-3.fc38.i686.rpm 2.4 MB/s | 65 kB 00:00 (113/153): libuuid-2.38.1-3.fc38.i686.rpm 1.3 MB/s | 28 kB 00:00 (114/153): lua-srpm-macros-1-7.fc37.noarch.rpm 431 kB/s | 8.8 kB 00:00 (115/153): libzstd-1.5.2-3.fc37.i686.rpm 11 MB/s | 274 kB 00:00 (116/153): nim-srpm-macros-3-7.fc37.noarch.rpm 450 kB/s | 8.4 kB 00:00 (117/153): ocaml-srpm-macros-7-2.fc37.noarch.rp 735 kB/s | 13 kB 00:00 (118/153): openblas-srpm-macros-2-12.fc37.noarc 427 kB/s | 7.5 kB 00:00 (119/153): package-notes-srpm-macros-0.5-6.fc38 611 kB/s | 11 kB 00:00 (120/153): perl-srpm-macros-1-47.fc38.noarch.rp 473 kB/s | 8.2 kB 00:00 (121/153): pkgconf-1.8.0-3.fc37.i686.rpm 2.2 MB/s | 42 kB 00:00 (122/153): pkgconf-m4-1.8.0-3.fc37.noarch.rpm 929 kB/s | 14 kB 00:00 (123/153): pkgconf-pkg-config-1.8.0-3.fc37.i686 660 kB/s | 10 kB 00:00 (124/153): popt-1.19-1.fc38.i686.rpm 3.5 MB/s | 61 kB 00:00 (125/153): publicsuffix-list-dafsa-20221208-1.f 3.3 MB/s | 59 kB 00:00 (126/153): python-srpm-macros-3.11-6.fc38.noarc 1.4 MB/s | 25 kB 00:00 (127/153): qt5-srpm-macros-5.15.7-1.fc38.noarch 479 kB/s | 7.9 kB 00:00 (128/153): redhat-rpm-config-235-1.fc38.noarch. 3.7 MB/s | 74 kB 00:00 (129/153): readline-8.2-2.fc38.i686.rpm 9.5 MB/s | 218 kB 00:00 (130/153): rpm-build-4.18.0-8.fc38.i686.rpm 3.0 MB/s | 69 kB 00:00 (131/153): rpm-build-libs-4.18.0-8.fc38.i686.rp 3.9 MB/s | 102 kB 00:00 (132/153): rpm-4.18.0-8.fc38.i686.rpm 12 MB/s | 543 kB 00:00 (133/153): rpmautospec-rpm-macros-0.3.1-1.fc38. 345 kB/s | 8.8 kB 00:00 (134/153): rpm-libs-4.18.0-8.fc38.i686.rpm 6.5 MB/s | 341 kB 00:00 (135/153): rpm-sequoia-1.2.0-1.fc38.i686.rpm 16 MB/s | 924 kB 00:00 (136/153): rust-srpm-macros-23-1.fc38.noarch.rp 345 kB/s | 9.4 kB 00:00 (137/153): setup-2.14.3-1.fc38.noarch.rpm 5.3 MB/s | 146 kB 00:00 (138/153): sed-4.8-11.fc37.i686.rpm 3.6 MB/s | 300 kB 00:00 (139/153): sqlite-libs-3.40.0-1.fc38.i686.rpm 12 MB/s | 705 kB 00:00 (140/153): shadow-utils-4.13-3.fc38.i686.rpm 12 MB/s | 1.2 MB 00:00 (141/153): tar-1.34-5.fc38.i686.rpm 16 MB/s | 892 kB 00:00 (142/153): tzdata-2022g-1.fc38.noarch.rpm 7.4 MB/s | 432 kB 00:00 (143/153): unzip-6.0-58.fc38.i686.rpm 6.0 MB/s | 177 kB 00:00 (144/153): systemd-libs-252.4-598.fc38.i686.rpm 6.0 MB/s | 662 kB 00:00 (145/153): util-linux-core-2.38.1-3.fc38.i686.r 14 MB/s | 467 kB 00:00 (146/153): which-2.21-36.fc38.i686.rpm 1.5 MB/s | 42 kB 00:00 (147/153): xxhash-libs-0.8.1-3.fc37.i686.rpm 2.2 MB/s | 59 kB 00:00 (148/153): xz-libs-5.2.9-1.fc38.i686.rpm 3.8 MB/s | 101 kB 00:00 (149/153): xz-5.2.9-1.fc38.i686.rpm 5.6 MB/s | 300 kB 00:00 (150/153): zip-3.0-35.fc38.i686.rpm 8.2 MB/s | 263 kB 00:00 (151/153): zlib-1.2.13-1.fc38.i686.rpm 3.0 MB/s | 92 kB 00:00 (152/153): zstd-1.5.2-3.fc37.i686.rpm 12 MB/s | 418 kB 00:00 (153/153): util-linux-2.38.1-3.fc38.i686.rpm 12 MB/s | 2.3 MB 00:00 -------------------------------------------------------------------------------- Total 23 MB/s | 53 MB 00:02 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Running scriptlet: filesystem-3.18-2.fc37.i686 1/1 Preparing : 1/1 Installing : crypto-policies-20221215-1.gita4c31a3.fc38.noarc 1/153 Running scriptlet: crypto-policies-20221215-1.gita4c31a3.fc38.noarc 1/153 Installing : fedora-release-identity-basic-38-0.6.noarch 2/153 Installing : tzdata-2022g-1.fc38.noarch 3/153 Installing : rust-srpm-macros-23-1.fc38.noarch 4/153 Installing : qt5-srpm-macros-5.15.7-1.fc38.noarch 5/153 Installing : publicsuffix-list-dafsa-20221208-1.fc38.noarch 6/153 Installing : pkgconf-m4-1.8.0-3.fc37.noarch 7/153 Installing : perl-srpm-macros-1-47.fc38.noarch 8/153 Installing : package-notes-srpm-macros-0.5-6.fc38.noarch 9/153 Installing : openblas-srpm-macros-2-12.fc37.noarch 10/153 Installing : ocaml-srpm-macros-7-2.fc37.noarch 11/153 Installing : nim-srpm-macros-3-7.fc37.noarch 12/153 Installing : kernel-srpm-macros-1.0-15.fc37.noarch 13/153 Installing : gnat-srpm-macros-4-16.fc37.noarch 14/153 Installing : ghc-srpm-macros-1.5.0-7.fc37.noarch 15/153 Installing : fpc-srpm-macros-1.3-6.fc37.noarch 16/153 Installing : fedora-gpg-keys-38-0.3.noarch 17/153 Installing : fedora-release-38-0.6.noarch 18/153 Installing : fedora-release-common-38-0.6.noarch 19/153 Installing : fedora-repos-rawhide-38-0.3.noarch 20/153 Installing : fedora-repos-38-0.3.noarch 21/153 Installing : setup-2.14.3-1.fc38.noarch 22/153 warning: /etc/hosts created as /etc/hosts.rpmnew Running scriptlet: setup-2.14.3-1.fc38.noarch 22/153 Installing : filesystem-3.18-2.fc37.i686 23/153 Installing : basesystem-11-14.fc37.noarch 24/153 Installing : ansible-srpm-macros-1-8.1.fc38.noarch 25/153 Installing : pcre2-syntax-10.40-1.fc38.1.noarch 26/153 Installing : ncurses-base-6.3-5.20221126.fc38.noarch 27/153 Installing : libssh-config-0.10.4-2.fc38.noarch 28/153 Installing : coreutils-common-9.1-8.fc38.i686 29/153 Installing : libgcc-13.0.0-0.4.fc38.i686 30/153 Running scriptlet: libgcc-13.0.0-0.4.fc38.i686 30/153 Installing : ncurses-libs-6.3-5.20221126.fc38.i686 31/153 Installing : glibc-gconv-extra-2.36.9000-19.fc38.i686 32/153 Running scriptlet: glibc-gconv-extra-2.36.9000-19.fc38.i686 32/153 Running scriptlet: glibc-2.36.9000-19.fc38.i686 33/153 Installing : glibc-2.36.9000-19.fc38.i686 33/153 Running scriptlet: glibc-2.36.9000-19.fc38.i686 33/153 Installing : bash-5.2.9-3.fc38.i686 34/153 Running scriptlet: bash-5.2.9-3.fc38.i686 34/153 Installing : glibc-common-2.36.9000-19.fc38.i686 35/153 Installing : glibc-minimal-langpack-2.36.9000-19.fc38.i686 36/153 Installing : zlib-1.2.13-1.fc38.i686 37/153 Installing : xz-libs-5.2.9-1.fc38.i686 38/153 Installing : bzip2-libs-1.0.8-12.fc38.i686 39/153 Installing : elfutils-libelf-0.188-3.fc38.i686 40/153 Installing : gmp-1:6.2.1-3.fc38.i686 41/153 Installing : libstdc++-13.0.0-0.4.fc38.i686 42/153 Installing : libuuid-2.38.1-3.fc38.i686 43/153 Installing : libzstd-1.5.2-3.fc37.i686 44/153 Installing : popt-1.19-1.fc38.i686 45/153 Installing : libblkid-2.38.1-3.fc38.i686 46/153 Installing : libattr-2.5.1-5.fc38.i686 47/153 Installing : libacl-2.3.1-4.fc38.i686 48/153 Installing : libcap-2.48-5.fc38.i686 49/153 Installing : libxcrypt-4.4.33-5.fc38.i686 50/153 Installing : readline-8.2-2.fc38.i686 51/153 Installing : lz4-libs-1.9.3-5.fc38.i686 52/153 Installing : systemd-libs-252.4-598.fc38.i686 53/153 Installing : mpfr-4.1.1-2.fc38.i686 54/153 Installing : dwz-0.15-1.fc38.i686 55/153 Installing : unzip-6.0-58.fc38.i686 56/153 Installing : file-libs-5.42-4.fc38.i686 57/153 Installing : file-5.42-4.fc38.i686 58/153 Installing : sqlite-libs-3.40.0-1.fc38.i686 59/153 Installing : alternatives-1.21-1.fc38.i686 60/153 Installing : libcap-ng-0.8.3-4.fc38.i686 61/153 Installing : audit-libs-3.0.9-2.fc38.i686 62/153 Installing : libeconf-0.4.0-4.fc38.i686 63/153 Installing : pam-libs-1.5.2-15.fc38.i686 64/153 Installing : libsepol-3.4-4.fc38.i686 65/153 Installing : libunistring-1.0-2.fc38.i686 66/153 Installing : libidn2-2.3.4-1.fc38.i686 67/153 Installing : lua-libs-5.4.4-6.fc38.i686 68/153 Installing : pcre2-10.40-1.fc38.1.i686 69/153 Installing : libselinux-3.4-6.fc38.i686 70/153 Installing : sed-4.8-11.fc37.i686 71/153 Installing : grep-3.8-1.fc38.i686 72/153 Installing : findutils-1:4.9.0-2.fc38.i686 73/153 Installing : xz-5.2.9-1.fc38.i686 74/153 Installing : libmount-2.38.1-3.fc38.i686 75/153 Installing : libcom_err-1.46.5-3.fc37.i686 76/153 Installing : libsmartcols-2.38.1-3.fc38.i686 77/153 Installing : elfutils-default-yama-scope-0.188-3.fc38.noarch 78/153 Running scriptlet: elfutils-default-yama-scope-0.188-3.fc38.noarch 78/153 Installing : util-linux-core-2.38.1-3.fc38.i686 79/153 Installing : libsemanage-3.4-6.fc38.i686 80/153 Installing : shadow-utils-2:4.13-3.fc38.i686 81/153 Running scriptlet: libutempter-1.2.1-7.fc38.i686 82/153 Installing : libutempter-1.2.1-7.fc38.i686 82/153 Installing : tar-2:1.34-5.fc38.i686 83/153 Installing : libpsl-0.21.1-6.fc38.i686 84/153 Installing : zip-3.0-35.fc38.i686 85/153 Installing : zstd-1.5.2-3.fc37.i686 86/153 Installing : libfdisk-2.38.1-3.fc38.i686 87/153 Installing : nettle-3.8-2.fc38.i686 88/153 Installing : rpm-sequoia-1.2.0-1.fc38.i686 89/153 Installing : rpm-libs-4.18.0-8.fc38.i686 90/153 Installing : bzip2-1.0.8-12.fc38.i686 91/153 Installing : libxml2-2.10.3-2.fc38.i686 92/153 Installing : ed-1.18-2.fc38.i686 93/153 Installing : patch-2.7.6-17.fc38.i686 94/153 Installing : cpio-2.13-13.fc38.i686 95/153 Installing : diffutils-3.8-3.fc38.i686 96/153 Installing : gdbm-libs-1:1.23-2.fc38.i686 97/153 Installing : cyrus-sasl-lib-2.1.28-8.fc38.i686 98/153 Installing : jansson-2.13.1-5.fc38.i686 99/153 Installing : keyutils-libs-1.6.1-5.fc38.i686 100/153 Installing : libbrotli-1.0.9-9.fc38.i686 101/153 Installing : libdb-5.3.28-54.fc38.i686 102/153 Installing : libffi-3.4.4-1.fc38.i686 103/153 Installing : p11-kit-0.24.1-5.fc38.i686 104/153 Installing : libnghttp2-1.51.0-1.fc38.i686 105/153 Installing : libsigsegv-2.14-3.fc38.i686 106/153 Installing : gawk-5.1.1-4.fc38.i686 107/153 Installing : libtasn1-4.19.0-1.fc38.i686 108/153 Installing : p11-kit-trust-0.24.1-5.fc38.i686 109/153 Running scriptlet: p11-kit-trust-0.24.1-5.fc38.i686 109/153 Installing : openssl-libs-1:3.0.5-6.fc38.i686 110/153 Installing : coreutils-9.1-8.fc38.i686 111/153 Running scriptlet: ca-certificates-2022.2.54-5.fc37.noarch 112/153 Installing : ca-certificates-2022.2.54-5.fc37.noarch 112/153 Running scriptlet: ca-certificates-2022.2.54-5.fc37.noarch 112/153 Running scriptlet: authselect-libs-1.4.2-1.fc38.i686 113/153 Installing : authselect-libs-1.4.2-1.fc38.i686 113/153 Installing : gzip-1.12-2.fc38.i686 114/153 Installing : cracklib-2.9.7-30.fc38.i686 115/153 Installing : libpwquality-1.4.5-1.fc38.i686 116/153 Installing : authselect-1.4.2-1.fc38.i686 117/153 Installing : libarchive-3.6.1-3.fc38.i686 118/153 Installing : libevent-2.1.12-7.fc38.i686 119/153 Installing : openldap-2.6.3-1.fc38.i686 120/153 Installing : libverto-0.3.2-4.fc38.i686 121/153 Installing : krb5-libs-1.20.1-3.fc38.i686 122/153 Installing : libtirpc-1.3.3-0.fc38.i686 123/153 Installing : libnsl2-2.0.0-4.fc38.i686 124/153 Installing : pam-1.5.2-15.fc38.i686 125/153 Installing : libssh-0.10.4-2.fc38.i686 126/153 Installing : libcurl-7.87.0-1.fc38.i686 127/153 Installing : elfutils-libs-0.188-3.fc38.i686 128/153 Installing : elfutils-debuginfod-client-0.188-3.fc38.i686 129/153 Installing : binutils-gold-2.39-6.fc38.i686 130/153 Installing : binutils-2.39-6.fc38.i686 131/153 Running scriptlet: binutils-2.39-6.fc38.i686 131/153 Installing : elfutils-0.188-3.fc38.i686 132/153 Installing : curl-7.87.0-1.fc38.i686 133/153 Running scriptlet: rpm-4.18.0-8.fc38.i686 134/153 Installing : rpm-4.18.0-8.fc38.i686 134/153 Installing : efi-srpm-macros-5-6.fc37.noarch 135/153 Installing : lua-srpm-macros-1-7.fc37.noarch 136/153 Installing : rpmautospec-rpm-macros-0.3.1-1.fc38.noarch 137/153 Installing : fonts-srpm-macros-1:2.0.5-10.fc38.noarch 138/153 Installing : go-srpm-macros-3.2.0-1.fc38.noarch 139/153 Installing : python-srpm-macros-3.11-6.fc38.noarch 140/153 Installing : redhat-rpm-config-235-1.fc38.noarch 141/153 Installing : libgomp-13.0.0-0.4.fc38.i686 142/153 Installing : rpm-build-libs-4.18.0-8.fc38.i686 143/153 Installing : libpkgconf-1.8.0-3.fc37.i686 144/153 Installing : pkgconf-1.8.0-3.fc37.i686 145/153 Installing : pkgconf-pkg-config-1.8.0-3.fc37.i686 146/153 Installing : xxhash-libs-0.8.1-3.fc37.i686 147/153 Installing : gdb-minimal-12.1-10.fc38.i686 148/153 Installing : debugedit-5.0-5.fc37.i686 149/153 Installing : rpm-build-4.18.0-8.fc38.i686 150/153 Installing : util-linux-2.38.1-3.fc38.i686 151/153 Installing : which-2.21-36.fc38.i686 152/153 Installing : info-7.0.1-1.fc38.i686 153/153 Running scriptlet: filesystem-3.18-2.fc37.i686 153/153 Running scriptlet: ca-certificates-2022.2.54-5.fc37.noarch 153/153 Running scriptlet: authselect-libs-1.4.2-1.fc38.i686 153/153 Running scriptlet: rpm-4.18.0-8.fc38.i686 153/153 Running scriptlet: info-7.0.1-1.fc38.i686 153/153 Verifying : alternatives-1.21-1.fc38.i686 1/153 Verifying : authselect-1.4.2-1.fc38.i686 2/153 Verifying : authselect-libs-1.4.2-1.fc38.i686 3/153 Verifying : bash-5.2.9-3.fc38.i686 4/153 Verifying : binutils-2.39-6.fc38.i686 5/153 Verifying : binutils-gold-2.39-6.fc38.i686 6/153 Verifying : bzip2-1.0.8-12.fc38.i686 7/153 Verifying : bzip2-libs-1.0.8-12.fc38.i686 8/153 Verifying : coreutils-9.1-8.fc38.i686 9/153 Verifying : coreutils-common-9.1-8.fc38.i686 10/153 Verifying : cpio-2.13-13.fc38.i686 11/153 Verifying : cracklib-2.9.7-30.fc38.i686 12/153 Verifying : curl-7.87.0-1.fc38.i686 13/153 Verifying : cyrus-sasl-lib-2.1.28-8.fc38.i686 14/153 Verifying : diffutils-3.8-3.fc38.i686 15/153 Verifying : dwz-0.15-1.fc38.i686 16/153 Verifying : ed-1.18-2.fc38.i686 17/153 Verifying : elfutils-0.188-3.fc38.i686 18/153 Verifying : elfutils-debuginfod-client-0.188-3.fc38.i686 19/153 Verifying : elfutils-default-yama-scope-0.188-3.fc38.noarch 20/153 Verifying : elfutils-libelf-0.188-3.fc38.i686 21/153 Verifying : elfutils-libs-0.188-3.fc38.i686 22/153 Verifying : file-5.42-4.fc38.i686 23/153 Verifying : file-libs-5.42-4.fc38.i686 24/153 Verifying : findutils-1:4.9.0-2.fc38.i686 25/153 Verifying : gawk-5.1.1-4.fc38.i686 26/153 Verifying : gdbm-libs-1:1.23-2.fc38.i686 27/153 Verifying : gmp-1:6.2.1-3.fc38.i686 28/153 Verifying : grep-3.8-1.fc38.i686 29/153 Verifying : gzip-1.12-2.fc38.i686 30/153 Verifying : jansson-2.13.1-5.fc38.i686 31/153 Verifying : keyutils-libs-1.6.1-5.fc38.i686 32/153 Verifying : krb5-libs-1.20.1-3.fc38.i686 33/153 Verifying : libacl-2.3.1-4.fc38.i686 34/153 Verifying : libarchive-3.6.1-3.fc38.i686 35/153 Verifying : libattr-2.5.1-5.fc38.i686 36/153 Verifying : libbrotli-1.0.9-9.fc38.i686 37/153 Verifying : libcap-2.48-5.fc38.i686 38/153 Verifying : libcap-ng-0.8.3-4.fc38.i686 39/153 Verifying : libcurl-7.87.0-1.fc38.i686 40/153 Verifying : libdb-5.3.28-54.fc38.i686 41/153 Verifying : libeconf-0.4.0-4.fc38.i686 42/153 Verifying : libevent-2.1.12-7.fc38.i686 43/153 Verifying : libffi-3.4.4-1.fc38.i686 44/153 Verifying : libidn2-2.3.4-1.fc38.i686 45/153 Verifying : libnghttp2-1.51.0-1.fc38.i686 46/153 Verifying : libnsl2-2.0.0-4.fc38.i686 47/153 Verifying : libpsl-0.21.1-6.fc38.i686 48/153 Verifying : libselinux-3.4-6.fc38.i686 49/153 Verifying : libsemanage-3.4-6.fc38.i686 50/153 Verifying : libsepol-3.4-4.fc38.i686 51/153 Verifying : libsigsegv-2.14-3.fc38.i686 52/153 Verifying : libssh-0.10.4-2.fc38.i686 53/153 Verifying : libssh-config-0.10.4-2.fc38.noarch 54/153 Verifying : libtasn1-4.19.0-1.fc38.i686 55/153 Verifying : libtirpc-1.3.3-0.fc38.i686 56/153 Verifying : libunistring-1.0-2.fc38.i686 57/153 Verifying : libutempter-1.2.1-7.fc38.i686 58/153 Verifying : libverto-0.3.2-4.fc38.i686 59/153 Verifying : libxcrypt-4.4.33-5.fc38.i686 60/153 Verifying : libxml2-2.10.3-2.fc38.i686 61/153 Verifying : lua-libs-5.4.4-6.fc38.i686 62/153 Verifying : lz4-libs-1.9.3-5.fc38.i686 63/153 Verifying : mpfr-4.1.1-2.fc38.i686 64/153 Verifying : ncurses-base-6.3-5.20221126.fc38.noarch 65/153 Verifying : ncurses-libs-6.3-5.20221126.fc38.i686 66/153 Verifying : nettle-3.8-2.fc38.i686 67/153 Verifying : openldap-2.6.3-1.fc38.i686 68/153 Verifying : openssl-libs-1:3.0.5-6.fc38.i686 69/153 Verifying : p11-kit-0.24.1-5.fc38.i686 70/153 Verifying : p11-kit-trust-0.24.1-5.fc38.i686 71/153 Verifying : pam-1.5.2-15.fc38.i686 72/153 Verifying : pam-libs-1.5.2-15.fc38.i686 73/153 Verifying : patch-2.7.6-17.fc38.i686 74/153 Verifying : pcre2-10.40-1.fc38.1.i686 75/153 Verifying : pcre2-syntax-10.40-1.fc38.1.noarch 76/153 Verifying : libgcc-13.0.0-0.4.fc38.i686 77/153 Verifying : libgomp-13.0.0-0.4.fc38.i686 78/153 Verifying : libstdc++-13.0.0-0.4.fc38.i686 79/153 Verifying : ansible-srpm-macros-1-8.1.fc38.noarch 80/153 Verifying : audit-libs-3.0.9-2.fc38.i686 81/153 Verifying : basesystem-11-14.fc37.noarch 82/153 Verifying : ca-certificates-2022.2.54-5.fc37.noarch 83/153 Verifying : crypto-policies-20221215-1.gita4c31a3.fc38.noarc 84/153 Verifying : debugedit-5.0-5.fc37.i686 85/153 Verifying : efi-srpm-macros-5-6.fc37.noarch 86/153 Verifying : fedora-gpg-keys-38-0.3.noarch 87/153 Verifying : fedora-release-38-0.6.noarch 88/153 Verifying : fedora-release-common-38-0.6.noarch 89/153 Verifying : fedora-release-identity-basic-38-0.6.noarch 90/153 Verifying : fedora-repos-38-0.3.noarch 91/153 Verifying : fedora-repos-rawhide-38-0.3.noarch 92/153 Verifying : filesystem-3.18-2.fc37.i686 93/153 Verifying : fonts-srpm-macros-1:2.0.5-10.fc38.noarch 94/153 Verifying : fpc-srpm-macros-1.3-6.fc37.noarch 95/153 Verifying : gdb-minimal-12.1-10.fc38.i686 96/153 Verifying : ghc-srpm-macros-1.5.0-7.fc37.noarch 97/153 Verifying : glibc-2.36.9000-19.fc38.i686 98/153 Verifying : glibc-common-2.36.9000-19.fc38.i686 99/153 Verifying : glibc-gconv-extra-2.36.9000-19.fc38.i686 100/153 Verifying : glibc-minimal-langpack-2.36.9000-19.fc38.i686 101/153 Verifying : gnat-srpm-macros-4-16.fc37.noarch 102/153 Verifying : go-srpm-macros-3.2.0-1.fc38.noarch 103/153 Verifying : info-7.0.1-1.fc38.i686 104/153 Verifying : kernel-srpm-macros-1.0-15.fc37.noarch 105/153 Verifying : libblkid-2.38.1-3.fc38.i686 106/153 Verifying : libcom_err-1.46.5-3.fc37.i686 107/153 Verifying : libfdisk-2.38.1-3.fc38.i686 108/153 Verifying : libmount-2.38.1-3.fc38.i686 109/153 Verifying : libpkgconf-1.8.0-3.fc37.i686 110/153 Verifying : libpwquality-1.4.5-1.fc38.i686 111/153 Verifying : libsmartcols-2.38.1-3.fc38.i686 112/153 Verifying : libuuid-2.38.1-3.fc38.i686 113/153 Verifying : libzstd-1.5.2-3.fc37.i686 114/153 Verifying : lua-srpm-macros-1-7.fc37.noarch 115/153 Verifying : nim-srpm-macros-3-7.fc37.noarch 116/153 Verifying : ocaml-srpm-macros-7-2.fc37.noarch 117/153 Verifying : openblas-srpm-macros-2-12.fc37.noarch 118/153 Verifying : package-notes-srpm-macros-0.5-6.fc38.noarch 119/153 Verifying : perl-srpm-macros-1-47.fc38.noarch 120/153 Verifying : pkgconf-1.8.0-3.fc37.i686 121/153 Verifying : pkgconf-m4-1.8.0-3.fc37.noarch 122/153 Verifying : pkgconf-pkg-config-1.8.0-3.fc37.i686 123/153 Verifying : popt-1.19-1.fc38.i686 124/153 Verifying : publicsuffix-list-dafsa-20221208-1.fc38.noarch 125/153 Verifying : python-srpm-macros-3.11-6.fc38.noarch 126/153 Verifying : qt5-srpm-macros-5.15.7-1.fc38.noarch 127/153 Verifying : readline-8.2-2.fc38.i686 128/153 Verifying : redhat-rpm-config-235-1.fc38.noarch 129/153 Verifying : rpm-4.18.0-8.fc38.i686 130/153 Verifying : rpm-build-4.18.0-8.fc38.i686 131/153 Verifying : rpm-build-libs-4.18.0-8.fc38.i686 132/153 Verifying : rpm-libs-4.18.0-8.fc38.i686 133/153 Verifying : rpm-sequoia-1.2.0-1.fc38.i686 134/153 Verifying : rpmautospec-rpm-macros-0.3.1-1.fc38.noarch 135/153 Verifying : rust-srpm-macros-23-1.fc38.noarch 136/153 Verifying : sed-4.8-11.fc37.i686 137/153 Verifying : setup-2.14.3-1.fc38.noarch 138/153 Verifying : shadow-utils-2:4.13-3.fc38.i686 139/153 Verifying : sqlite-libs-3.40.0-1.fc38.i686 140/153 Verifying : systemd-libs-252.4-598.fc38.i686 141/153 Verifying : tar-2:1.34-5.fc38.i686 142/153 Verifying : tzdata-2022g-1.fc38.noarch 143/153 Verifying : unzip-6.0-58.fc38.i686 144/153 Verifying : util-linux-2.38.1-3.fc38.i686 145/153 Verifying : util-linux-core-2.38.1-3.fc38.i686 146/153 Verifying : which-2.21-36.fc38.i686 147/153 Verifying : xxhash-libs-0.8.1-3.fc37.i686 148/153 Verifying : xz-5.2.9-1.fc38.i686 149/153 Verifying : xz-libs-5.2.9-1.fc38.i686 150/153 Verifying : zip-3.0-35.fc38.i686 151/153 Verifying : zlib-1.2.13-1.fc38.i686 152/153 Verifying : zstd-1.5.2-3.fc37.i686 153/153 Installed: alternatives-1.21-1.fc38.i686 ansible-srpm-macros-1-8.1.fc38.noarch audit-libs-3.0.9-2.fc38.i686 authselect-1.4.2-1.fc38.i686 authselect-libs-1.4.2-1.fc38.i686 basesystem-11-14.fc37.noarch bash-5.2.9-3.fc38.i686 binutils-2.39-6.fc38.i686 binutils-gold-2.39-6.fc38.i686 bzip2-1.0.8-12.fc38.i686 bzip2-libs-1.0.8-12.fc38.i686 ca-certificates-2022.2.54-5.fc37.noarch coreutils-9.1-8.fc38.i686 coreutils-common-9.1-8.fc38.i686 cpio-2.13-13.fc38.i686 cracklib-2.9.7-30.fc38.i686 crypto-policies-20221215-1.gita4c31a3.fc38.noarch curl-7.87.0-1.fc38.i686 cyrus-sasl-lib-2.1.28-8.fc38.i686 debugedit-5.0-5.fc37.i686 diffutils-3.8-3.fc38.i686 dwz-0.15-1.fc38.i686 ed-1.18-2.fc38.i686 efi-srpm-macros-5-6.fc37.noarch elfutils-0.188-3.fc38.i686 elfutils-debuginfod-client-0.188-3.fc38.i686 elfutils-default-yama-scope-0.188-3.fc38.noarch elfutils-libelf-0.188-3.fc38.i686 elfutils-libs-0.188-3.fc38.i686 fedora-gpg-keys-38-0.3.noarch fedora-release-38-0.6.noarch fedora-release-common-38-0.6.noarch fedora-release-identity-basic-38-0.6.noarch fedora-repos-38-0.3.noarch fedora-repos-rawhide-38-0.3.noarch file-5.42-4.fc38.i686 file-libs-5.42-4.fc38.i686 filesystem-3.18-2.fc37.i686 findutils-1:4.9.0-2.fc38.i686 fonts-srpm-macros-1:2.0.5-10.fc38.noarch fpc-srpm-macros-1.3-6.fc37.noarch gawk-5.1.1-4.fc38.i686 gdb-minimal-12.1-10.fc38.i686 gdbm-libs-1:1.23-2.fc38.i686 ghc-srpm-macros-1.5.0-7.fc37.noarch glibc-2.36.9000-19.fc38.i686 glibc-common-2.36.9000-19.fc38.i686 glibc-gconv-extra-2.36.9000-19.fc38.i686 glibc-minimal-langpack-2.36.9000-19.fc38.i686 gmp-1:6.2.1-3.fc38.i686 gnat-srpm-macros-4-16.fc37.noarch go-srpm-macros-3.2.0-1.fc38.noarch grep-3.8-1.fc38.i686 gzip-1.12-2.fc38.i686 info-7.0.1-1.fc38.i686 jansson-2.13.1-5.fc38.i686 kernel-srpm-macros-1.0-15.fc37.noarch keyutils-libs-1.6.1-5.fc38.i686 krb5-libs-1.20.1-3.fc38.i686 libacl-2.3.1-4.fc38.i686 libarchive-3.6.1-3.fc38.i686 libattr-2.5.1-5.fc38.i686 libblkid-2.38.1-3.fc38.i686 libbrotli-1.0.9-9.fc38.i686 libcap-2.48-5.fc38.i686 libcap-ng-0.8.3-4.fc38.i686 libcom_err-1.46.5-3.fc37.i686 libcurl-7.87.0-1.fc38.i686 libdb-5.3.28-54.fc38.i686 libeconf-0.4.0-4.fc38.i686 libevent-2.1.12-7.fc38.i686 libfdisk-2.38.1-3.fc38.i686 libffi-3.4.4-1.fc38.i686 libgcc-13.0.0-0.4.fc38.i686 libgomp-13.0.0-0.4.fc38.i686 libidn2-2.3.4-1.fc38.i686 libmount-2.38.1-3.fc38.i686 libnghttp2-1.51.0-1.fc38.i686 libnsl2-2.0.0-4.fc38.i686 libpkgconf-1.8.0-3.fc37.i686 libpsl-0.21.1-6.fc38.i686 libpwquality-1.4.5-1.fc38.i686 libselinux-3.4-6.fc38.i686 libsemanage-3.4-6.fc38.i686 libsepol-3.4-4.fc38.i686 libsigsegv-2.14-3.fc38.i686 libsmartcols-2.38.1-3.fc38.i686 libssh-0.10.4-2.fc38.i686 libssh-config-0.10.4-2.fc38.noarch libstdc++-13.0.0-0.4.fc38.i686 libtasn1-4.19.0-1.fc38.i686 libtirpc-1.3.3-0.fc38.i686 libunistring-1.0-2.fc38.i686 libutempter-1.2.1-7.fc38.i686 libuuid-2.38.1-3.fc38.i686 libverto-0.3.2-4.fc38.i686 libxcrypt-4.4.33-5.fc38.i686 libxml2-2.10.3-2.fc38.i686 libzstd-1.5.2-3.fc37.i686 lua-libs-5.4.4-6.fc38.i686 lua-srpm-macros-1-7.fc37.noarch lz4-libs-1.9.3-5.fc38.i686 mpfr-4.1.1-2.fc38.i686 ncurses-base-6.3-5.20221126.fc38.noarch ncurses-libs-6.3-5.20221126.fc38.i686 nettle-3.8-2.fc38.i686 nim-srpm-macros-3-7.fc37.noarch ocaml-srpm-macros-7-2.fc37.noarch openblas-srpm-macros-2-12.fc37.noarch openldap-2.6.3-1.fc38.i686 openssl-libs-1:3.0.5-6.fc38.i686 p11-kit-0.24.1-5.fc38.i686 p11-kit-trust-0.24.1-5.fc38.i686 package-notes-srpm-macros-0.5-6.fc38.noarch pam-1.5.2-15.fc38.i686 pam-libs-1.5.2-15.fc38.i686 patch-2.7.6-17.fc38.i686 pcre2-10.40-1.fc38.1.i686 pcre2-syntax-10.40-1.fc38.1.noarch perl-srpm-macros-1-47.fc38.noarch pkgconf-1.8.0-3.fc37.i686 pkgconf-m4-1.8.0-3.fc37.noarch pkgconf-pkg-config-1.8.0-3.fc37.i686 popt-1.19-1.fc38.i686 publicsuffix-list-dafsa-20221208-1.fc38.noarch python-srpm-macros-3.11-6.fc38.noarch qt5-srpm-macros-5.15.7-1.fc38.noarch readline-8.2-2.fc38.i686 redhat-rpm-config-235-1.fc38.noarch rpm-4.18.0-8.fc38.i686 rpm-build-4.18.0-8.fc38.i686 rpm-build-libs-4.18.0-8.fc38.i686 rpm-libs-4.18.0-8.fc38.i686 rpm-sequoia-1.2.0-1.fc38.i686 rpmautospec-rpm-macros-0.3.1-1.fc38.noarch rust-srpm-macros-23-1.fc38.noarch sed-4.8-11.fc37.i686 setup-2.14.3-1.fc38.noarch shadow-utils-2:4.13-3.fc38.i686 sqlite-libs-3.40.0-1.fc38.i686 systemd-libs-252.4-598.fc38.i686 tar-2:1.34-5.fc38.i686 tzdata-2022g-1.fc38.noarch unzip-6.0-58.fc38.i686 util-linux-2.38.1-3.fc38.i686 util-linux-core-2.38.1-3.fc38.i686 which-2.21-36.fc38.i686 xxhash-libs-0.8.1-3.fc37.i686 xz-5.2.9-1.fc38.i686 xz-libs-5.2.9-1.fc38.i686 zip-3.0-35.fc38.i686 zlib-1.2.13-1.fc38.i686 zstd-1.5.2-3.fc37.i686 Complete! Finish: dnf install Start: creating root cache Finish: creating root cache Finish: chroot init INFO: Installed packages: INFO: debugedit-5.0-5.fc37.i686 gdbm-libs-1.23-2.fc38.i686 elfutils-libs-0.188-3.fc38.i686 glibc-2.36.9000-19.fc38.i686 libblkid-2.38.1-3.fc38.i686 info-7.0.1-1.fc38.i686 cpio-2.13-13.fc38.i686 fpc-srpm-macros-1.3-6.fc37.noarch xz-5.2.9-1.fc38.i686 rpm-libs-4.18.0-8.fc38.i686 bzip2-1.0.8-12.fc38.i686 binutils-gold-2.39-6.fc38.i686 xxhash-libs-0.8.1-3.fc37.i686 package-notes-srpm-macros-0.5-6.fc38.noarch libstdc++-13.0.0-0.4.fc38.i686 libsemanage-3.4-6.fc38.i686 libeconf-0.4.0-4.fc38.i686 kernel-srpm-macros-1.0-15.fc37.noarch findutils-4.9.0-2.fc38.i686 libmount-2.38.1-3.fc38.i686 gnat-srpm-macros-4-16.fc37.noarch file-libs-5.42-4.fc38.i686 pam-1.5.2-15.fc38.i686 rpm-4.18.0-8.fc38.i686 libuuid-2.38.1-3.fc38.i686 pcre2-10.40-1.fc38.1.i686 file-5.42-4.fc38.i686 ncurses-base-6.3-5.20221126.fc38.noarch systemd-libs-252.4-598.fc38.i686 perl-srpm-macros-1-47.fc38.noarch libsigsegv-2.14-3.fc38.i686 rpmautospec-rpm-macros-0.3.1-1.fc38.noarch glibc-minimal-langpack-2.36.9000-19.fc38.i686 gzip-1.12-2.fc38.i686 lua-srpm-macros-1-7.fc37.noarch alternatives-1.21-1.fc38.i686 coreutils-common-9.1-8.fc38.i686 pam-libs-1.5.2-15.fc38.i686 tar-1.34-5.fc38.i686 pcre2-syntax-10.40-1.fc38.1.noarch ed-1.18-2.fc38.i686 gmp-6.2.1-3.fc38.i686 tzdata-2022g-1.fc38.noarch glibc-gconv-extra-2.36.9000-19.fc38.i686 authselect-libs-1.4.2-1.fc38.i686 libssh-0.10.4-2.fc38.i686 patch-2.7.6-17.fc38.i686 libxml2-2.10.3-2.fc38.i686 libcap-2.48-5.fc38.i686 libsmartcols-2.38.1-3.fc38.i686 cyrus-sasl-lib-2.1.28-8.fc38.i686 binutils-2.39-6.fc38.i686 xz-libs-5.2.9-1.fc38.i686 crypto-policies-20221215-1.gita4c31a3.fc38.noarch libattr-2.5.1-5.fc38.i686 cracklib-2.9.7-30.fc38.i686 p11-kit-trust-0.24.1-5.fc38.i686 python-srpm-macros-3.11-6.fc38.noarch fonts-srpm-macros-2.0.5-10.fc38.noarch openssl-libs-3.0.5-6.fc38.i686 rpm-build-libs-4.18.0-8.fc38.i686 basesystem-11-14.fc37.noarch libbrotli-1.0.9-9.fc38.i686 libevent-2.1.12-7.fc38.i686 go-srpm-macros-3.2.0-1.fc38.noarch ca-certificates-2022.2.54-5.fc37.noarch lua-libs-5.4.4-6.fc38.i686 bzip2-libs-1.0.8-12.fc38.i686 libselinux-3.4-6.fc38.i686 libnghttp2-1.51.0-1.fc38.i686 libpsl-0.21.1-6.fc38.i686 libutempter-1.2.1-7.fc38.i686 ansible-srpm-macros-1-8.1.fc38.noarch libarchive-3.6.1-3.fc38.i686 pkgconf-pkg-config-1.8.0-3.fc37.i686 fedora-release-identity-basic-38-0.6.noarch popt-1.19-1.fc38.i686 dwz-0.15-1.fc38.i686 zip-3.0-35.fc38.i686 libfdisk-2.38.1-3.fc38.i686 elfutils-0.188-3.fc38.i686 publicsuffix-list-dafsa-20221208-1.fc38.noarch jansson-2.13.1-5.fc38.i686 mpfr-4.1.1-2.fc38.i686 libunistring-1.0-2.fc38.i686 util-linux-core-2.38.1-3.fc38.i686 nim-srpm-macros-3-7.fc37.noarch pkgconf-1.8.0-3.fc37.i686 redhat-rpm-config-235-1.fc38.noarch libffi-3.4.4-1.fc38.i686 libpwquality-1.4.5-1.fc38.i686 fedora-release-38-0.6.noarch fedora-repos-38-0.3.noarch readline-8.2-2.fc38.i686 krb5-libs-1.20.1-3.fc38.i686 bash-5.2.9-3.fc38.i686 zstd-1.5.2-3.fc37.i686 authselect-1.4.2-1.fc38.i686 setup-2.14.3-1.fc38.noarch audit-libs-3.0.9-2.fc38.i686 qt5-srpm-macros-5.15.7-1.fc38.noarch libcap-ng-0.8.3-4.fc38.i686 libssh-config-0.10.4-2.fc38.noarch diffutils-3.8-3.fc38.i686 keyutils-libs-1.6.1-5.fc38.i686 openldap-2.6.3-1.fc38.i686 fedora-repos-rawhide-38-0.3.noarch ocaml-srpm-macros-7-2.fc37.noarch fedora-release-common-38-0.6.noarch gdb-minimal-12.1-10.fc38.i686 elfutils-debuginfod-client-0.188-3.fc38.i686 lz4-libs-1.9.3-5.fc38.i686 libdb-5.3.28-54.fc38.i686 libcom_err-1.46.5-3.fc37.i686 zlib-1.2.13-1.fc38.i686 libacl-2.3.1-4.fc38.i686 p11-kit-0.24.1-5.fc38.i686 libgomp-13.0.0-0.4.fc38.i686 which-2.21-36.fc38.i686 gawk-5.1.1-4.fc38.i686 grep-3.8-1.fc38.i686 pkgconf-m4-1.8.0-3.fc37.noarch libcurl-7.87.0-1.fc38.i686 libsepol-3.4-4.fc38.i686 sed-4.8-11.fc37.i686 openblas-srpm-macros-2-12.fc37.noarch libnsl2-2.0.0-4.fc38.i686 libidn2-2.3.4-1.fc38.i686 nettle-3.8-2.fc38.i686 fedora-gpg-keys-38-0.3.noarch rpm-build-4.18.0-8.fc38.i686 libzstd-1.5.2-3.fc37.i686 libtasn1-4.19.0-1.fc38.i686 rpm-sequoia-1.2.0-1.fc38.i686 sqlite-libs-3.40.0-1.fc38.i686 libxcrypt-4.4.33-5.fc38.i686 rust-srpm-macros-23-1.fc38.noarch coreutils-9.1-8.fc38.i686 shadow-utils-4.13-3.fc38.i686 elfutils-libelf-0.188-3.fc38.i686 ncurses-libs-6.3-5.20221126.fc38.i686 libtirpc-1.3.3-0.fc38.i686 libgcc-13.0.0-0.4.fc38.i686 filesystem-3.18-2.fc37.i686 unzip-6.0-58.fc38.i686 efi-srpm-macros-5-6.fc37.noarch ghc-srpm-macros-1.5.0-7.fc37.noarch libverto-0.3.2-4.fc38.i686 libpkgconf-1.8.0-3.fc37.i686 curl-7.87.0-1.fc38.i686 glibc-common-2.36.9000-19.fc38.i686 elfutils-default-yama-scope-0.188-3.fc38.noarch util-linux-2.38.1-3.fc38.i686 Start: buildsrpm Start: rpmbuild -bs sh: line 1: perl: command not found Building target platforms: i686 Building for target i686 setting SOURCE_DATE_EPOCH=1658448000 Wrote: /builddir/build/SRPMS/perl-Coro-Multicore-1.07-5.fc38.src.rpm Finish: rpmbuild -bs cp: ‘var/lib/mock/fedora-rawhide-i686-1672119885.721026/root/var/log’: No such file or directory INFO: chroot_scan: 3 files copied to /var/lib/copr-rpmbuild/results/chroot_scan INFO: /var/lib/mock/fedora-rawhide-i686-1672119885.721026/root/var/log/dnf.rpm.log /var/lib/mock/fedora-rawhide-i686-1672119885.721026/root/var/log/dnf.librepo.log /var/lib/mock/fedora-rawhide-i686-1672119885.721026/root/var/log/dnf.log Finish: buildsrpm INFO: Done(/var/lib/copr-rpmbuild/workspace/workdir-nc8i9z4k/perl-Coro-Multicore/perl-Coro-Multicore.spec) Config(child) 1 minutes 36 seconds INFO: Results and/or logs in: /var/lib/copr-rpmbuild/results INFO: Cleaning up build root ('cleanup_on_success=True') Start: clean chroot INFO: unmounting tmpfs. Finish: clean chroot Finish: run Running (timeout=115200): unbuffer mock --rebuild /var/lib/copr-rpmbuild/results/perl-Coro-Multicore-1.07-5.fc38.src.rpm --resultdir /var/lib/copr-rpmbuild/results --uniqueext 1672119885.721026 -r /var/lib/copr-rpmbuild/results/configs/child.cfg INFO: mock.py version 3.5 starting (python version = 3.11.0, NVR = mock-3.5-1.fc37)... Start(bootstrap): init plugins INFO: tmpfs initialized INFO: selinux enabled INFO: chroot_scan: initialized INFO: compress_logs: initialized Finish(bootstrap): init plugins Start: init plugins INFO: tmpfs initialized INFO: selinux enabled INFO: chroot_scan: initialized INFO: compress_logs: initialized Finish: init plugins INFO: Signal handler active Start: run INFO: Start(/var/lib/copr-rpmbuild/results/perl-Coro-Multicore-1.07-5.fc38.src.rpm) Config(fedora-rawhide-i686) Start: clean chroot Finish: clean chroot Start(bootstrap): chroot init INFO: mounting tmpfs at /var/lib/mock/fedora-rawhide-i686-bootstrap-1672119885.721026/root. INFO: reusing tmpfs at /var/lib/mock/fedora-rawhide-i686-bootstrap-1672119885.721026/root. INFO: calling preinit hooks INFO: enabled root cache INFO: enabled package manager cache Start(bootstrap): cleaning package manager metadata Finish(bootstrap): cleaning package manager metadata INFO: enabled HW Info plugin Mock Version: 3.5 INFO: Mock Version: 3.5 Finish(bootstrap): chroot init Start: chroot init INFO: mounting tmpfs at /var/lib/mock/fedora-rawhide-i686-1672119885.721026/root. INFO: calling preinit hooks INFO: enabled root cache Start: unpacking root cache Finish: unpacking root cache INFO: enabled package manager cache Start: cleaning package manager metadata Finish: cleaning package manager metadata INFO: enabled HW Info plugin Mock Version: 3.5 INFO: Mock Version: 3.5 Start: dnf update No matches found for the following disable plugin patterns: local, spacewalk, versionlock Copr repository 11 kB/s | 3.0 kB 00:00 Copr repository 31 MB/s | 29 MB 00:00 Additional repo https_jakub_fedorapeople_org_fe 10 kB/s | 3.0 kB 00:00 local 14 kB/s | 3.8 kB 00:00 Dependencies resolved. Nothing to do. Complete! Finish: dnf update Finish: chroot init Start: build phase for perl-Coro-Multicore-1.07-5.fc38.src.rpm Start: build setup for perl-Coro-Multicore-1.07-5.fc38.src.rpm sh: line 1: perl: command not found Building target platforms: i686 Building for target i686 setting SOURCE_DATE_EPOCH=1658448000 Wrote: /builddir/build/SRPMS/perl-Coro-Multicore-1.07-5.fc38.src.rpm No matches found for the following disable plugin patterns: local, spacewalk, versionlock Copr repository 12 kB/s | 3.0 kB 00:00 Additional repo https_jakub_fedorapeople_org_fe 9.8 kB/s | 3.0 kB 00:00 local 13 kB/s | 3.8 kB 00:00 Package coreutils-9.1-8.fc38.i686 is already installed. Package findutils-1:4.9.0-2.fc38.i686 is already installed. Dependencies resolved. ======================================================================================================================== Package Arch Version Repository Size ======================================================================================================================== Installing: gcc i686 13.0.0-0.4.fc38 https_jakub_fedorapeople_org_fedora_gcc13_arch 34 M make i686 1:4.3-11.fc38 copr_base 542 k perl-AnyEvent i686 7.17-13.fc37 local 409 k perl-Canary-Stability noarch 2013-13.fc38 local 14 k perl-Carp noarch 1.52-489.fc37 local 29 k perl-Coro i686 6.570-9.fc38 local 250 k perl-ExtUtils-MakeMaker noarch 2:7.64-490.fc37 local 290 k perl-devel i686 4:5.36.0-492.fc38 local 699 k perl-generators noarch 1.15-1.fc38 local 16 k perl-interpreter i686 4:5.36.0-492.fc38 local 75 k perl-libs i686 4:5.36.0-492.fc38 local 2.2 M perl-podlators noarch 1:5.00-1.fc38 local 122 k Installing dependencies: annobin-docs noarch 10.99-1.0.1.fc38 https_jakub_fedorapeople_org_fedora_gcc13_arch 93 k annobin-plugin-gcc i686 10.99-1.0.1.fc38 https_jakub_fedorapeople_org_fedora_gcc13_arch 889 k cpp i686 13.0.0-0.4.fc38 https_jakub_fedorapeople_org_fedora_gcc13_arch 11 M expat i686 2.5.0-1.fc38 copr_base 115 k gc i686 8.2.2-1.fc38 copr_base 113 k gcc-plugin-annobin i686 13.0.0-0.4.fc38 https_jakub_fedorapeople_org_fedora_gcc13_arch 30 k glibc-devel i686 2.36.9000-19.fc38 local 43 k glibc-headers-x86 noarch 2.36.9000-19.fc38 local 450 k groff-base i686 1.22.4-10.fc38 copr_base 1.0 M guile22 i686 2.2.7-6.fc38 copr_base 6.5 M kernel-headers i686 6.1.0-1.fc38 local 1.4 M libasan i686 13.0.0-0.4.fc38 https_jakub_fedorapeople_org_fedora_gcc13_arch 491 k libatomic i686 13.0.0-0.4.fc38 https_jakub_fedorapeople_org_fedora_gcc13_arch 17 k libb2 i686 0.98.1-7.fc38 copr_base 29 k libmpc i686 1.2.1-5.fc38 copr_base 66 k libtool-ltdl i686 2.4.7-3.0.1.fc38 https_jakub_fedorapeople_org_fedora_gcc13_arch 39 k libubsan i686 13.0.0-0.4.fc38 https_jakub_fedorapeople_org_fedora_gcc13_arch 219 k libxcrypt-devel i686 4.4.33-5.fc38 copr_base 31 k mpdecimal i686 2.5.1-4.fc38 copr_base 107 k ncurses i686 6.3-5.20221126.fc38 copr_base 409 k perl-AnyEvent-AIO noarch 1.1-37.fc37 local 11 k perl-AnyEvent-BDB noarch 1.1-41.fc38 local 12 k perl-AutoLoader noarch 5.74-492.fc38 local 24 k perl-AutoSplit noarch 5.74-492.fc38 local 25 k perl-B i686 1.83-492.fc38 local 189 k perl-BDB i686 1.92-18.fc38 copr_base 74 k perl-Benchmark noarch 1.23-492.fc38 local 30 k perl-Class-Struct noarch 0.66-492.fc38 local 25 k perl-Compress-Raw-Bzip2 i686 2.201-2.fc38 copr_base 35 k perl-Compress-Raw-Zlib i686 2.202-4.fc38 copr_base 65 k perl-Data-Dumper i686 2.184-490.fc37 local 58 k perl-Devel-PPPort i686 3.68-490.fc37 local 226 k perl-Digest noarch 1.20-489.fc37 local 26 k perl-Digest-MD5 i686 2.58-489.fc37 local 37 k perl-DynaLoader i686 1.52-492.fc38 local 29 k perl-EV i686 4.33-10.fc37 local 263 k perl-Encode i686 4:3.19-492.fc38 local 1.2 M perl-Errno i686 1.36-492.fc38 local 18 k perl-Event i686 1.28-6.fc37 local 283 k perl-Exporter noarch 5.77-489.fc37 local 31 k perl-ExtUtils-Command noarch 2:7.64-490.fc37 local 14 k perl-ExtUtils-Constant noarch 0.25-492.fc38 local 50 k perl-ExtUtils-Install noarch 2.20-489.fc37 local 44 k perl-ExtUtils-Manifest noarch 1:1.73-489.fc37 local 34 k perl-ExtUtils-ParseXS noarch 1:3.45-489.fc37 local 182 k perl-Fcntl i686 1.15-492.fc38 local 24 k perl-Fedora-VSP noarch 0.001-30.fc38 local 23 k perl-File-Basename noarch 2.85-492.fc38 local 20 k perl-File-Compare noarch 1.100.700-492.fc38 local 16 k perl-File-Copy noarch 2.39-492.fc38 local 23 k perl-File-Find noarch 1.40-492.fc38 local 28 k perl-File-Path noarch 2.18-489.fc37 local 35 k perl-File-Temp noarch 1:0.231.100-489.fc37 local 59 k perl-File-stat noarch 1.12-492.fc38 local 20 k perl-FileHandle noarch 2.03-492.fc38 local 19 k perl-Getopt-Long noarch 1:2.54-1.fc38 local 60 k perl-Getopt-Std noarch 1.13-492.fc38 local 19 k perl-Guard i686 1.023-25.fc37 local 23 k perl-HTTP-Tiny noarch 0.082-1.fc37 local 55 k perl-IO i686 1.50-492.fc38 local 91 k perl-IO-AIO i686 4.79-1.fc38 local 150 k perl-IO-Compress noarch 2.201-3.fc37 local 262 k perl-IO-Socket-IP noarch 0.41-490.fc37 local 42 k perl-IO-Socket-SSL noarch 2.078-1.fc38 local 220 k perl-IPC-Open3 noarch 1.22-492.fc38 local 26 k perl-MIME-Base64 i686 3.16-489.fc37 local 31 k perl-Net-HTTP noarch 6.22-4.fc38 local 39 k perl-Net-SSLeay i686 1.92-4.fc37 local 353 k perl-POSIX i686 2.03-492.fc38 local 104 k perl-PathTools i686 3.84-489.fc37 local 85 k perl-Pod-Escapes noarch 1:1.07-489.fc37 local 20 k perl-Pod-Perldoc noarch 3.28.01-490.fc37 local 84 k perl-Pod-Simple noarch 1:3.43-490.fc37 local 215 k perl-Pod-Usage noarch 4:2.03-3.fc37 local 40 k perl-Scalar-List-Utils i686 5:1.63-489.fc38 local 76 k perl-SelectSaver noarch 1.02-492.fc38 local 15 k perl-Socket i686 4:2.036-1.fc38 local 56 k perl-Storable i686 1:3.26-489.fc37 local 99 k perl-Symbol noarch 1.09-492.fc38 local 17 k perl-Term-ANSIColor noarch 5.01-490.fc37 local 48 k perl-Term-Cap noarch 1.17-489.fc37 local 22 k perl-Test-Harness noarch 1:3.44-490.fc37 local 268 k perl-Text-ParseWords noarch 3.31-489.fc37 local 16 k perl-Text-Tabs+Wrap noarch 2021.0814-489.fc37 local 22 k perl-Time-HiRes i686 4:1.9770-489.fc37 local 59 k perl-Time-Local noarch 2:1.300-489.fc37 local 33 k perl-URI noarch 5.17-1.fc38 local 111 k perl-base noarch 2.27-492.fc38 local 19 k perl-common-sense i686 3.7.5-10.fc37 local 30 k perl-constant noarch 1.33-490.fc37 local 23 k perl-if noarch 0.61.000-492.fc38 local 17 k perl-lib i686 0.65-492.fc38 local 18 k perl-libnet noarch 3.14-490.fc37 local 126 k perl-locale noarch 1.10-492.fc38 local 17 k perl-macros noarch 4:5.36.0-492.fc38 local 14 k perl-mro i686 1.26-492.fc38 local 32 k perl-overload noarch 1.35-492.fc38 local 49 k perl-overloading noarch 0.02-492.fc38 local 16 k perl-parent noarch 1:0.239-1.fc38 local 14 k perl-vars noarch 1.05-492.fc38 local 16 k perl-version i686 8:0.99.29-490.fc37 local 63 k python-pip-wheel noarch 22.3.1-1.fc38 local 1.4 M python-setuptools-wheel noarch 65.5.1-1.fc38 local 715 k python3 i686 3.11.1-1.fc38 local 27 k python3-libs i686 3.11.1-1.fc38 local 9.3 M python3-pyparsing noarch 3.0.9-2.fc37 local 255 k systemtap-sdt-devel i686 4.8~pre16650659g6a096a7d-1.fc38 local 73 k Transaction Summary ======================================================================================================================== Install 119 Packages Total download size: 79 M Installed size: 263 M Downloading Packages: (1/119): expat-2.5.0-1.fc38.i686.rpm 420 kB/s | 115 kB 00:00 (2/119): groff-base-1.22.4-10.fc38.i686.rpm 3.4 MB/s | 1.0 MB 00:00 (3/119): libb2-0.98.1-7.fc38.i686.rpm 2.3 MB/s | 29 kB 00:00 (4/119): libmpc-1.2.1-5.fc38.i686.rpm 2.3 MB/s | 66 kB 00:00 (5/119): libxcrypt-devel-4.4.33-5.fc38.i686.rpm 618 kB/s | 31 kB 00:00 (6/119): guile22-2.2.7-6.fc38.i686.rpm 46 MB/s | 6.5 MB 00:00 (7/119): make-4.3-11.fc38.i686.rpm 25 MB/s | 542 kB 00:00 (8/119): mpdecimal-2.5.1-4.fc38.i686.rpm 11 MB/s | 107 kB 00:00 (9/119): ncurses-6.3-5.20221126.fc38.i686.rpm 24 MB/s | 409 kB 00:00 (10/119): perl-BDB-1.92-18.fc38.i686.rpm 3.7 MB/s | 74 kB 00:00 (11/119): perl-Compress-Raw-Bzip2-2.201-2.fc38. 3.0 MB/s | 35 kB 00:00 (12/119): perl-Compress-Raw-Zlib-2.202-4.fc38.i 4.9 MB/s | 65 kB 00:00 (13/119): gc-8.2.2-1.fc38.i686.rpm 184 kB/s | 113 kB 00:00 (14/119): annobin-docs-10.99-1.0.1.fc38.noarch. 345 kB/s | 93 kB 00:00 (15/119): annobin-plugin-gcc-10.99-1.0.1.fc38.i 2.4 MB/s | 889 kB 00:00 (16/119): gcc-plugin-annobin-13.0.0-0.4.fc38.i6 885 kB/s | 30 kB 00:00 (17/119): libasan-13.0.0-0.4.fc38.i686.rpm 6.5 MB/s | 491 kB 00:00 (18/119): libatomic-13.0.0-0.4.fc38.i686.rpm 453 kB/s | 17 kB 00:00 (19/119): libtool-ltdl-2.4.7-3.0.1.fc38.i686.rp 1.0 MB/s | 39 kB 00:00 (20/119): libubsan-13.0.0-0.4.fc38.i686.rpm 5.3 MB/s | 219 kB 00:00 (21/119): glibc-devel-2.36.9000-19.fc38.i686.rp 221 kB/s | 43 kB 00:00 (22/119): cpp-13.0.0-0.4.fc38.i686.rpm 13 MB/s | 11 MB 00:00 (23/119): glibc-headers-x86-2.36.9000-19.fc38.n 2.0 MB/s | 450 kB 00:00 (24/119): perl-AnyEvent-7.17-13.fc37.i686.rpm 2.3 MB/s | 409 kB 00:00 (25/119): perl-AnyEvent-AIO-1.1-37.fc37.noarch. 108 kB/s | 11 kB 00:00 (26/119): perl-AnyEvent-BDB-1.1-41.fc38.noarch. 106 kB/s | 12 kB 00:00 (27/119): perl-AutoLoader-5.74-492.fc38.noarch. 441 kB/s | 24 kB 00:00 (28/119): kernel-headers-6.1.0-1.fc38.i686.rpm 2.8 MB/s | 1.4 MB 00:00 (29/119): perl-AutoSplit-5.74-492.fc38.noarch.r 679 kB/s | 25 kB 00:00 (30/119): perl-Benchmark-1.23-492.fc38.noarch.r 1.0 MB/s | 30 kB 00:00 (31/119): perl-B-1.83-492.fc38.i686.rpm 5.8 MB/s | 189 kB 00:00 (32/119): perl-Canary-Stability-2013-13.fc38.no 550 kB/s | 14 kB 00:00 (33/119): perl-Carp-1.52-489.fc37.noarch.rpm 1.1 MB/s | 29 kB 00:00 (34/119): perl-Class-Struct-0.66-492.fc38.noarc 1.3 MB/s | 25 kB 00:00 (35/119): perl-Data-Dumper-2.184-490.fc37.i686. 3.0 MB/s | 58 kB 00:00 (36/119): perl-Coro-6.570-9.fc38.i686.rpm 2.1 MB/s | 250 kB 00:00 (37/119): perl-Devel-PPPort-3.68-490.fc37.i686. 2.7 MB/s | 226 kB 00:00 (38/119): perl-Digest-1.20-489.fc37.noarch.rpm 2.0 MB/s | 26 kB 00:00 (39/119): perl-Digest-MD5-2.58-489.fc37.i686.rp 2.8 MB/s | 37 kB 00:00 (40/119): perl-DynaLoader-1.52-492.fc38.i686.rp 568 kB/s | 29 kB 00:00 (41/119): perl-EV-4.33-10.fc37.i686.rpm 2.8 MB/s | 263 kB 00:00 (42/119): perl-Encode-3.19-492.fc38.i686.rpm 11 MB/s | 1.2 MB 00:00 (43/119): perl-Errno-1.36-492.fc38.i686.rpm 257 kB/s | 18 kB 00:00 (44/119): perl-Exporter-5.77-489.fc37.noarch.rp 2.3 MB/s | 31 kB 00:00 (45/119): perl-ExtUtils-Command-7.64-490.fc37.n 998 kB/s | 14 kB 00:00 (46/119): perl-ExtUtils-Constant-0.25-492.fc38. 1.1 MB/s | 50 kB 00:00 (47/119): perl-ExtUtils-Install-2.20-489.fc37.n 1.5 MB/s | 44 kB 00:00 (48/119): perl-Event-1.28-6.fc37.i686.rpm 2.5 MB/s | 283 kB 00:00 (49/119): perl-ExtUtils-Manifest-1.73-489.fc37. 2.0 MB/s | 34 kB 00:00 (50/119): perl-ExtUtils-ParseXS-3.45-489.fc37.n 2.5 MB/s | 182 kB 00:00 (51/119): perl-Fcntl-1.15-492.fc38.i686.rpm 1.7 MB/s | 24 kB 00:00 (52/119): perl-Fedora-VSP-0.001-30.fc38.noarch. 1.5 MB/s | 23 kB 00:00 (53/119): gcc-13.0.0-0.4.fc38.i686.rpm 18 MB/s | 34 MB 00:01 (54/119): perl-File-Basename-2.85-492.fc38.noar 436 kB/s | 20 kB 00:00 (55/119): perl-File-Compare-1.100.700-492.fc38. 1.1 MB/s | 16 kB 00:00 (56/119): perl-File-Find-1.40-492.fc38.noarch.r 2.4 MB/s | 28 kB 00:00 (57/119): perl-ExtUtils-MakeMaker-7.64-490.fc37 1.4 MB/s | 290 kB 00:00 (58/119): perl-File-Path-2.18-489.fc37.noarch.r 2.8 MB/s | 35 kB 00:00 (59/119): perl-File-stat-1.12-492.fc38.noarch.r 1.5 MB/s | 20 kB 00:00 (60/119): perl-File-Copy-2.39-492.fc38.noarch.r 417 kB/s | 23 kB 00:00 (61/119): perl-FileHandle-2.03-492.fc38.noarch. 1.3 MB/s | 19 kB 00:00 (62/119): perl-File-Temp-0.231.100-489.fc37.noa 1.6 MB/s | 59 kB 00:00 (63/119): perl-Getopt-Long-2.54-1.fc38.noarch.r 2.1 MB/s | 60 kB 00:00 (64/119): perl-Getopt-Std-1.13-492.fc38.noarch. 1.2 MB/s | 19 kB 00:00 (65/119): perl-Guard-1.023-25.fc37.i686.rpm 808 kB/s | 23 kB 00:00 (66/119): perl-IO-1.50-492.fc38.i686.rpm 1.5 MB/s | 91 kB 00:00 (67/119): perl-HTTP-Tiny-0.082-1.fc37.noarch.rp 906 kB/s | 55 kB 00:00 (68/119): perl-IO-Socket-IP-0.41-490.fc37.noarc 1.9 MB/s | 42 kB 00:00 (69/119): perl-IO-Compress-2.201-3.fc37.noarch. 7.9 MB/s | 262 kB 00:00 (70/119): perl-IPC-Open3-1.22-492.fc38.noarch.r 2.3 MB/s | 26 kB 00:00 (71/119): perl-MIME-Base64-3.16-489.fc37.i686.r 2.6 MB/s | 31 kB 00:00 (72/119): perl-Net-HTTP-6.22-4.fc38.noarch.rpm 2.1 MB/s | 39 kB 00:00 (73/119): perl-IO-Socket-SSL-2.078-1.fc38.noarc 2.8 MB/s | 220 kB 00:00 (74/119): perl-Net-SSLeay-1.92-4.fc37.i686.rpm 8.3 MB/s | 353 kB 00:00 (75/119): perl-IO-AIO-4.79-1.fc38.i686.rpm 898 kB/s | 150 kB 00:00 (76/119): perl-POSIX-2.03-492.fc38.i686.rpm 3.3 MB/s | 104 kB 00:00 (77/119): perl-Pod-Escapes-1.07-489.fc37.noarch 1.7 MB/s | 20 kB 00:00 (78/119): perl-PathTools-3.84-489.fc37.i686.rpm 4.1 MB/s | 85 kB 00:00 (79/119): perl-Pod-Usage-2.03-3.fc37.noarch.rpm 3.4 MB/s | 40 kB 00:00 (80/119): perl-Pod-Perldoc-3.28.01-490.fc37.noa 2.8 MB/s | 84 kB 00:00 (81/119): perl-Scalar-List-Utils-1.63-489.fc38. 6.0 MB/s | 76 kB 00:00 (82/119): perl-SelectSaver-1.02-492.fc38.noarch 792 kB/s | 15 kB 00:00 (83/119): perl-Socket-2.036-1.fc38.i686.rpm 2.4 MB/s | 56 kB 00:00 (84/119): perl-Symbol-1.09-492.fc38.noarch.rpm 1.3 MB/s | 17 kB 00:00 (85/119): perl-Pod-Simple-3.43-490.fc37.noarch. 3.1 MB/s | 215 kB 00:00 (86/119): perl-Storable-3.26-489.fc37.i686.rpm 3.2 MB/s | 99 kB 00:00 (87/119): perl-Term-Cap-1.17-489.fc37.noarch.rp 1.6 MB/s | 22 kB 00:00 (88/119): perl-Term-ANSIColor-5.01-490.fc37.noa 2.8 MB/s | 48 kB 00:00 (89/119): perl-Text-ParseWords-3.31-489.fc37.no 1.5 MB/s | 16 kB 00:00 (90/119): perl-Text-Tabs+Wrap-2021.0814-489.fc3 2.0 MB/s | 22 kB 00:00 (91/119): perl-Time-Local-1.300-489.fc37.noarch 2.8 MB/s | 33 kB 00:00 (92/119): perl-Time-HiRes-1.9770-489.fc37.i686. 2.7 MB/s | 59 kB 00:00 (93/119): perl-URI-5.17-1.fc38.noarch.rpm 5.2 MB/s | 111 kB 00:00 (94/119): perl-base-2.27-492.fc38.noarch.rpm 1.1 MB/s | 19 kB 00:00 (95/119): perl-common-sense-3.7.5-10.fc37.i686. 2.6 MB/s | 30 kB 00:00 (96/119): perl-Test-Harness-3.44-490.fc37.noarc 3.9 MB/s | 268 kB 00:00 (97/119): perl-constant-1.33-490.fc37.noarch.rp 1.4 MB/s | 23 kB 00:00 (98/119): perl-generators-1.15-1.fc38.noarch.rp 1.4 MB/s | 16 kB 00:00 (99/119): perl-if-0.61.000-492.fc38.noarch.rpm 1.5 MB/s | 17 kB 00:00 (100/119): perl-lib-0.65-492.fc38.i686.rpm 1.6 MB/s | 18 kB 00:00 (101/119): perl-interpreter-5.36.0-492.fc38.i68 3.4 MB/s | 75 kB 00:00 (102/119): perl-libnet-3.14-490.fc37.noarch.rpm 3.0 MB/s | 126 kB 00:00 (103/119): perl-devel-5.36.0-492.fc38.i686.rpm 8.3 MB/s | 699 kB 00:00 (104/119): perl-macros-5.36.0-492.fc38.noarch.r 1.3 MB/s | 14 kB 00:00 (105/119): perl-locale-1.10-492.fc38.noarch.rpm 677 kB/s | 17 kB 00:00 (106/119): perl-mro-1.26-492.fc38.i686.rpm 2.7 MB/s | 32 kB 00:00 (107/119): perl-overloading-0.02-492.fc38.noarc 1.4 MB/s | 16 kB 00:00 (108/119): perl-overload-1.35-492.fc38.noarch.r 2.2 MB/s | 49 kB 00:00 (109/119): perl-parent-0.239-1.fc38.noarch.rpm 1.3 MB/s | 14 kB 00:00 (110/119): perl-vars-1.05-492.fc38.noarch.rpm 1.4 MB/s | 16 kB 00:00 (111/119): perl-version-0.99.29-490.fc37.i686.r 5.1 MB/s | 63 kB 00:00 (112/119): perl-podlators-5.00-1.fc38.noarch.rp 3.0 MB/s | 122 kB 00:00 (113/119): python-pip-wheel-22.3.1-1.fc38.noarc 9.2 MB/s | 1.4 MB 00:00 (114/119): python3-3.11.1-1.fc38.i686.rpm 2.2 MB/s | 27 kB 00:00 (115/119): python-setuptools-wheel-65.5.1-1.fc3 4.4 MB/s | 715 kB 00:00 (116/119): python3-pyparsing-3.0.9-2.fc37.noarc 3.5 MB/s | 255 kB 00:00 (117/119): systemtap-sdt-devel-4.8~pre16650659g 2.7 MB/s | 73 kB 00:00 (118/119): perl-libs-5.36.0-492.fc38.i686.rpm 5.4 MB/s | 2.2 MB 00:00 (119/119): python3-libs-3.11.1-1.fc38.i686.rpm 12 MB/s | 9.3 MB 00:00 -------------------------------------------------------------------------------- Total 19 MB/s | 79 MB 00:04 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : 1/1 Installing : libmpc-1.2.1-5.fc38.i686 1/119 Installing : python-setuptools-wheel-65.5.1-1.fc38.noarch 2/119 Installing : python-pip-wheel-22.3.1-1.fc38.noarch 3/119 Installing : kernel-headers-6.1.0-1.fc38.i686 4/119 Installing : glibc-headers-x86-2.36.9000-19.fc38.noarch 5/119 Installing : glibc-devel-2.36.9000-19.fc38.i686 6/119 Installing : libxcrypt-devel-4.4.33-5.fc38.i686 7/119 Installing : annobin-docs-10.99-1.0.1.fc38.noarch 8/119 Installing : cpp-13.0.0-0.4.fc38.i686 9/119 Installing : libubsan-13.0.0-0.4.fc38.i686 10/119 Installing : libtool-ltdl-2.4.7-3.0.1.fc38.i686 11/119 Installing : libatomic-13.0.0-0.4.fc38.i686 12/119 Installing : libasan-13.0.0-0.4.fc38.i686 13/119 Installing : ncurses-6.3-5.20221126.fc38.i686 14/119 Installing : mpdecimal-2.5.1-4.fc38.i686 15/119 Installing : libb2-0.98.1-7.fc38.i686 16/119 Running scriptlet: groff-base-1.22.4-10.fc38.i686 17/119 Installing : groff-base-1.22.4-10.fc38.i686 17/119 Running scriptlet: groff-base-1.22.4-10.fc38.i686 17/119 Installing : perl-Digest-1.20-489.fc37.noarch 18/119 Installing : perl-Digest-MD5-2.58-489.fc37.i686 19/119 Installing : perl-B-1.83-492.fc38.i686 20/119 Installing : perl-FileHandle-2.03-492.fc38.noarch 21/119 Installing : perl-AutoLoader-5.74-492.fc38.noarch 22/119 Installing : perl-Data-Dumper-2.184-490.fc37.i686 23/119 Installing : perl-libnet-3.14-490.fc37.noarch 24/119 Installing : perl-base-2.27-492.fc38.noarch 25/119 Installing : perl-URI-5.17-1.fc38.noarch 26/119 Installing : perl-Net-SSLeay-1.92-4.fc37.i686 27/119 Installing : perl-Text-Tabs+Wrap-2021.0814-489.fc37.noarch 28/119 Installing : perl-if-0.61.000-492.fc38.noarch 29/119 Installing : perl-IO-Socket-IP-0.41-490.fc37.noarch 30/119 Installing : perl-Time-Local-2:1.300-489.fc37.noarch 31/119 Installing : perl-File-Path-2.18-489.fc37.noarch 32/119 Installing : perl-IO-Socket-SSL-2.078-1.fc38.noarch 33/119 Installing : perl-Pod-Escapes-1:1.07-489.fc37.noarch 34/119 Installing : perl-Class-Struct-0.66-492.fc38.noarch 35/119 Installing : perl-POSIX-2.03-492.fc38.i686 36/119 Installing : perl-Term-ANSIColor-5.01-490.fc37.noarch 37/119 Installing : perl-IPC-Open3-1.22-492.fc38.noarch 38/119 Installing : perl-File-Temp-1:0.231.100-489.fc37.noarch 39/119 Installing : perl-HTTP-Tiny-0.082-1.fc37.noarch 40/119 Installing : perl-Term-Cap-1.17-489.fc37.noarch 41/119 Installing : perl-Pod-Simple-1:3.43-490.fc37.noarch 42/119 Installing : perl-Socket-4:2.036-1.fc38.i686 43/119 Installing : perl-SelectSaver-1.02-492.fc38.noarch 44/119 Installing : perl-Symbol-1.09-492.fc38.noarch 45/119 Installing : perl-File-stat-1.12-492.fc38.noarch 46/119 Installing : perl-podlators-1:5.00-1.fc38.noarch 47/119 Installing : perl-Pod-Perldoc-3.28.01-490.fc37.noarch 48/119 Installing : perl-Fcntl-1.15-492.fc38.i686 49/119 Installing : perl-Text-ParseWords-3.31-489.fc37.noarch 50/119 Installing : perl-mro-1.26-492.fc38.i686 51/119 Installing : perl-IO-1.50-492.fc38.i686 52/119 Installing : perl-overloading-0.02-492.fc38.noarch 53/119 Installing : perl-Pod-Usage-4:2.03-3.fc37.noarch 54/119 Installing : perl-Errno-1.36-492.fc38.i686 55/119 Installing : perl-File-Basename-2.85-492.fc38.noarch 56/119 Installing : perl-Getopt-Std-1.13-492.fc38.noarch 57/119 Installing : perl-MIME-Base64-3.16-489.fc37.i686 58/119 Installing : perl-Scalar-List-Utils-5:1.63-489.fc38.i686 59/119 Installing : perl-constant-1.33-490.fc37.noarch 60/119 Installing : perl-Storable-1:3.26-489.fc37.i686 61/119 Installing : perl-overload-1.35-492.fc38.noarch 62/119 Installing : perl-parent-1:0.239-1.fc38.noarch 63/119 Installing : perl-vars-1.05-492.fc38.noarch 64/119 Installing : perl-Getopt-Long-1:2.54-1.fc38.noarch 65/119 Installing : perl-Carp-1.52-489.fc37.noarch 66/119 Installing : perl-Exporter-5.77-489.fc37.noarch 67/119 Installing : perl-PathTools-3.84-489.fc37.i686 68/119 Installing : perl-DynaLoader-1.52-492.fc38.i686 69/119 Installing : perl-Encode-4:3.19-492.fc38.i686 70/119 Installing : perl-libs-4:5.36.0-492.fc38.i686 71/119 Installing : perl-interpreter-4:5.36.0-492.fc38.i686 72/119 Installing : perl-File-Find-1.40-492.fc38.noarch 73/119 Installing : perl-common-sense-3.7.5-10.fc37.i686 74/119 Installing : perl-File-Copy-2.39-492.fc38.noarch 75/119 Installing : perl-ExtUtils-ParseXS-1:3.45-489.fc37.noarch 76/119 Installing : perl-File-Compare-1.100.700-492.fc38.noarch 77/119 Installing : perl-ExtUtils-Command-2:7.64-490.fc37.noarch 78/119 Installing : perl-ExtUtils-Manifest-1:1.73-489.fc37.noarch 79/119 Installing : perl-macros-4:5.36.0-492.fc38.noarch 80/119 Installing : perl-AutoSplit-5.74-492.fc38.noarch 81/119 Installing : perl-Benchmark-1.23-492.fc38.noarch 82/119 Installing : perl-ExtUtils-Constant-0.25-492.fc38.noarch 83/119 Installing : perl-Fedora-VSP-0.001-30.fc38.noarch 84/119 Installing : perl-lib-0.65-492.fc38.i686 85/119 Installing : perl-locale-1.10-492.fc38.noarch 86/119 Installing : perl-Time-HiRes-4:1.9770-489.fc37.i686 87/119 Installing : perl-version-8:0.99.29-490.fc37.i686 88/119 Installing : perl-BDB-1.92-18.fc38.i686 89/119 Installing : perl-IO-AIO-4.79-1.fc38.i686 90/119 Installing : perl-Compress-Raw-Zlib-2.202-4.fc38.i686 91/119 Installing : perl-Guard-1.023-25.fc37.i686 92/119 Installing : perl-Test-Harness-1:3.44-490.fc37.noarch 93/119 Installing : perl-Event-1.28-6.fc37.i686 94/119 Installing : perl-EV-4.33-10.fc37.i686 95/119 Installing : perl-Compress-Raw-Bzip2-2.201-2.fc38.i686 96/119 Installing : perl-IO-Compress-2.201-3.fc37.noarch 97/119 Installing : perl-Net-HTTP-6.22-4.fc38.noarch 98/119 Installing : perl-AnyEvent-AIO-1.1-37.fc37.noarch 99/119 Installing : perl-AnyEvent-BDB-1.1-41.fc38.noarch 100/119 Installing : perl-AnyEvent-7.17-13.fc37.i686 101/119 Installing : perl-Coro-6.570-9.fc38.i686 102/119 Installing : perl-Devel-PPPort-3.68-490.fc37.i686 103/119 Installing : gc-8.2.2-1.fc38.i686 104/119 Installing : guile22-2.2.7-6.fc38.i686 105/119 Installing : make-1:4.3-11.fc38.i686 106/119 Installing : gcc-13.0.0-0.4.fc38.i686 107/119 Running scriptlet: gcc-13.0.0-0.4.fc38.i686 107/119 Installing : expat-2.5.0-1.fc38.i686 108/119 Installing : perl-generators-1.15-1.fc38.noarch 109/119 Installing : python3-3.11.1-1.fc38.i686 110/119 Installing : python3-libs-3.11.1-1.fc38.i686 111/119 Installing : python3-pyparsing-3.0.9-2.fc37.noarch 112/119 Installing : systemtap-sdt-devel-4.8~pre16650659g6a096a7d-1.f 113/119 Installing : perl-ExtUtils-Install-2.20-489.fc37.noarch 114/119 Installing : perl-devel-4:5.36.0-492.fc38.i686 115/119 Installing : perl-ExtUtils-MakeMaker-2:7.64-490.fc37.noarch 116/119 Installing : perl-Canary-Stability-2013-13.fc38.noarch 117/119 Installing : annobin-plugin-gcc-10.99-1.0.1.fc38.i686 118/119 Running scriptlet: annobin-plugin-gcc-10.99-1.0.1.fc38.i686 118/119 Installing : gcc-plugin-annobin-13.0.0-0.4.fc38.i686 119/119 Running scriptlet: gcc-plugin-annobin-13.0.0-0.4.fc38.i686 119/119 Verifying : expat-2.5.0-1.fc38.i686 1/119 Verifying : gc-8.2.2-1.fc38.i686 2/119 Verifying : groff-base-1.22.4-10.fc38.i686 3/119 Verifying : guile22-2.2.7-6.fc38.i686 4/119 Verifying : libb2-0.98.1-7.fc38.i686 5/119 Verifying : libmpc-1.2.1-5.fc38.i686 6/119 Verifying : libxcrypt-devel-4.4.33-5.fc38.i686 7/119 Verifying : make-1:4.3-11.fc38.i686 8/119 Verifying : mpdecimal-2.5.1-4.fc38.i686 9/119 Verifying : ncurses-6.3-5.20221126.fc38.i686 10/119 Verifying : perl-BDB-1.92-18.fc38.i686 11/119 Verifying : perl-Compress-Raw-Bzip2-2.201-2.fc38.i686 12/119 Verifying : perl-Compress-Raw-Zlib-2.202-4.fc38.i686 13/119 Verifying : annobin-docs-10.99-1.0.1.fc38.noarch 14/119 Verifying : annobin-plugin-gcc-10.99-1.0.1.fc38.i686 15/119 Verifying : cpp-13.0.0-0.4.fc38.i686 16/119 Verifying : gcc-13.0.0-0.4.fc38.i686 17/119 Verifying : gcc-plugin-annobin-13.0.0-0.4.fc38.i686 18/119 Verifying : libasan-13.0.0-0.4.fc38.i686 19/119 Verifying : libatomic-13.0.0-0.4.fc38.i686 20/119 Verifying : libtool-ltdl-2.4.7-3.0.1.fc38.i686 21/119 Verifying : libubsan-13.0.0-0.4.fc38.i686 22/119 Verifying : glibc-devel-2.36.9000-19.fc38.i686 23/119 Verifying : glibc-headers-x86-2.36.9000-19.fc38.noarch 24/119 Verifying : kernel-headers-6.1.0-1.fc38.i686 25/119 Verifying : perl-AnyEvent-7.17-13.fc37.i686 26/119 Verifying : perl-AnyEvent-AIO-1.1-37.fc37.noarch 27/119 Verifying : perl-AnyEvent-BDB-1.1-41.fc38.noarch 28/119 Verifying : perl-AutoLoader-5.74-492.fc38.noarch 29/119 Verifying : perl-AutoSplit-5.74-492.fc38.noarch 30/119 Verifying : perl-B-1.83-492.fc38.i686 31/119 Verifying : perl-Benchmark-1.23-492.fc38.noarch 32/119 Verifying : perl-Canary-Stability-2013-13.fc38.noarch 33/119 Verifying : perl-Carp-1.52-489.fc37.noarch 34/119 Verifying : perl-Class-Struct-0.66-492.fc38.noarch 35/119 Verifying : perl-Coro-6.570-9.fc38.i686 36/119 Verifying : perl-Data-Dumper-2.184-490.fc37.i686 37/119 Verifying : perl-Devel-PPPort-3.68-490.fc37.i686 38/119 Verifying : perl-Digest-1.20-489.fc37.noarch 39/119 Verifying : perl-Digest-MD5-2.58-489.fc37.i686 40/119 Verifying : perl-DynaLoader-1.52-492.fc38.i686 41/119 Verifying : perl-EV-4.33-10.fc37.i686 42/119 Verifying : perl-Encode-4:3.19-492.fc38.i686 43/119 Verifying : perl-Errno-1.36-492.fc38.i686 44/119 Verifying : perl-Event-1.28-6.fc37.i686 45/119 Verifying : perl-Exporter-5.77-489.fc37.noarch 46/119 Verifying : perl-ExtUtils-Command-2:7.64-490.fc37.noarch 47/119 Verifying : perl-ExtUtils-Constant-0.25-492.fc38.noarch 48/119 Verifying : perl-ExtUtils-Install-2.20-489.fc37.noarch 49/119 Verifying : perl-ExtUtils-MakeMaker-2:7.64-490.fc37.noarch 50/119 Verifying : perl-ExtUtils-Manifest-1:1.73-489.fc37.noarch 51/119 Verifying : perl-ExtUtils-ParseXS-1:3.45-489.fc37.noarch 52/119 Verifying : perl-Fcntl-1.15-492.fc38.i686 53/119 Verifying : perl-Fedora-VSP-0.001-30.fc38.noarch 54/119 Verifying : perl-File-Basename-2.85-492.fc38.noarch 55/119 Verifying : perl-File-Compare-1.100.700-492.fc38.noarch 56/119 Verifying : perl-File-Copy-2.39-492.fc38.noarch 57/119 Verifying : perl-File-Find-1.40-492.fc38.noarch 58/119 Verifying : perl-File-Path-2.18-489.fc37.noarch 59/119 Verifying : perl-File-Temp-1:0.231.100-489.fc37.noarch 60/119 Verifying : perl-File-stat-1.12-492.fc38.noarch 61/119 Verifying : perl-FileHandle-2.03-492.fc38.noarch 62/119 Verifying : perl-Getopt-Long-1:2.54-1.fc38.noarch 63/119 Verifying : perl-Getopt-Std-1.13-492.fc38.noarch 64/119 Verifying : perl-Guard-1.023-25.fc37.i686 65/119 Verifying : perl-HTTP-Tiny-0.082-1.fc37.noarch 66/119 Verifying : perl-IO-1.50-492.fc38.i686 67/119 Verifying : perl-IO-AIO-4.79-1.fc38.i686 68/119 Verifying : perl-IO-Compress-2.201-3.fc37.noarch 69/119 Verifying : perl-IO-Socket-IP-0.41-490.fc37.noarch 70/119 Verifying : perl-IO-Socket-SSL-2.078-1.fc38.noarch 71/119 Verifying : perl-IPC-Open3-1.22-492.fc38.noarch 72/119 Verifying : perl-MIME-Base64-3.16-489.fc37.i686 73/119 Verifying : perl-Net-HTTP-6.22-4.fc38.noarch 74/119 Verifying : perl-Net-SSLeay-1.92-4.fc37.i686 75/119 Verifying : perl-POSIX-2.03-492.fc38.i686 76/119 Verifying : perl-PathTools-3.84-489.fc37.i686 77/119 Verifying : perl-Pod-Escapes-1:1.07-489.fc37.noarch 78/119 Verifying : perl-Pod-Perldoc-3.28.01-490.fc37.noarch 79/119 Verifying : perl-Pod-Simple-1:3.43-490.fc37.noarch 80/119 Verifying : perl-Pod-Usage-4:2.03-3.fc37.noarch 81/119 Verifying : perl-Scalar-List-Utils-5:1.63-489.fc38.i686 82/119 Verifying : perl-SelectSaver-1.02-492.fc38.noarch 83/119 Verifying : perl-Socket-4:2.036-1.fc38.i686 84/119 Verifying : perl-Storable-1:3.26-489.fc37.i686 85/119 Verifying : perl-Symbol-1.09-492.fc38.noarch 86/119 Verifying : perl-Term-ANSIColor-5.01-490.fc37.noarch 87/119 Verifying : perl-Term-Cap-1.17-489.fc37.noarch 88/119 Verifying : perl-Test-Harness-1:3.44-490.fc37.noarch 89/119 Verifying : perl-Text-ParseWords-3.31-489.fc37.noarch 90/119 Verifying : perl-Text-Tabs+Wrap-2021.0814-489.fc37.noarch 91/119 Verifying : perl-Time-HiRes-4:1.9770-489.fc37.i686 92/119 Verifying : perl-Time-Local-2:1.300-489.fc37.noarch 93/119 Verifying : perl-URI-5.17-1.fc38.noarch 94/119 Verifying : perl-base-2.27-492.fc38.noarch 95/119 Verifying : perl-common-sense-3.7.5-10.fc37.i686 96/119 Verifying : perl-constant-1.33-490.fc37.noarch 97/119 Verifying : perl-devel-4:5.36.0-492.fc38.i686 98/119 Verifying : perl-generators-1.15-1.fc38.noarch 99/119 Verifying : perl-if-0.61.000-492.fc38.noarch 100/119 Verifying : perl-interpreter-4:5.36.0-492.fc38.i686 101/119 Verifying : perl-lib-0.65-492.fc38.i686 102/119 Verifying : perl-libnet-3.14-490.fc37.noarch 103/119 Verifying : perl-libs-4:5.36.0-492.fc38.i686 104/119 Verifying : perl-locale-1.10-492.fc38.noarch 105/119 Verifying : perl-macros-4:5.36.0-492.fc38.noarch 106/119 Verifying : perl-mro-1.26-492.fc38.i686 107/119 Verifying : perl-overload-1.35-492.fc38.noarch 108/119 Verifying : perl-overloading-0.02-492.fc38.noarch 109/119 Verifying : perl-parent-1:0.239-1.fc38.noarch 110/119 Verifying : perl-podlators-1:5.00-1.fc38.noarch 111/119 Verifying : perl-vars-1.05-492.fc38.noarch 112/119 Verifying : perl-version-8:0.99.29-490.fc37.i686 113/119 Verifying : python-pip-wheel-22.3.1-1.fc38.noarch 114/119 Verifying : python-setuptools-wheel-65.5.1-1.fc38.noarch 115/119 Verifying : python3-3.11.1-1.fc38.i686 116/119 Verifying : python3-libs-3.11.1-1.fc38.i686 117/119 Verifying : python3-pyparsing-3.0.9-2.fc37.noarch 118/119 Verifying : systemtap-sdt-devel-4.8~pre16650659g6a096a7d-1.f 119/119 Installed: annobin-docs-10.99-1.0.1.fc38.noarch annobin-plugin-gcc-10.99-1.0.1.fc38.i686 cpp-13.0.0-0.4.fc38.i686 expat-2.5.0-1.fc38.i686 gc-8.2.2-1.fc38.i686 gcc-13.0.0-0.4.fc38.i686 gcc-plugin-annobin-13.0.0-0.4.fc38.i686 glibc-devel-2.36.9000-19.fc38.i686 glibc-headers-x86-2.36.9000-19.fc38.noarch groff-base-1.22.4-10.fc38.i686 guile22-2.2.7-6.fc38.i686 kernel-headers-6.1.0-1.fc38.i686 libasan-13.0.0-0.4.fc38.i686 libatomic-13.0.0-0.4.fc38.i686 libb2-0.98.1-7.fc38.i686 libmpc-1.2.1-5.fc38.i686 libtool-ltdl-2.4.7-3.0.1.fc38.i686 libubsan-13.0.0-0.4.fc38.i686 libxcrypt-devel-4.4.33-5.fc38.i686 make-1:4.3-11.fc38.i686 mpdecimal-2.5.1-4.fc38.i686 ncurses-6.3-5.20221126.fc38.i686 perl-AnyEvent-7.17-13.fc37.i686 perl-AnyEvent-AIO-1.1-37.fc37.noarch perl-AnyEvent-BDB-1.1-41.fc38.noarch perl-AutoLoader-5.74-492.fc38.noarch perl-AutoSplit-5.74-492.fc38.noarch perl-B-1.83-492.fc38.i686 perl-BDB-1.92-18.fc38.i686 perl-Benchmark-1.23-492.fc38.noarch perl-Canary-Stability-2013-13.fc38.noarch perl-Carp-1.52-489.fc37.noarch perl-Class-Struct-0.66-492.fc38.noarch perl-Compress-Raw-Bzip2-2.201-2.fc38.i686 perl-Compress-Raw-Zlib-2.202-4.fc38.i686 perl-Coro-6.570-9.fc38.i686 perl-Data-Dumper-2.184-490.fc37.i686 perl-Devel-PPPort-3.68-490.fc37.i686 perl-Digest-1.20-489.fc37.noarch perl-Digest-MD5-2.58-489.fc37.i686 perl-DynaLoader-1.52-492.fc38.i686 perl-EV-4.33-10.fc37.i686 perl-Encode-4:3.19-492.fc38.i686 perl-Errno-1.36-492.fc38.i686 perl-Event-1.28-6.fc37.i686 perl-Exporter-5.77-489.fc37.noarch perl-ExtUtils-Command-2:7.64-490.fc37.noarch perl-ExtUtils-Constant-0.25-492.fc38.noarch perl-ExtUtils-Install-2.20-489.fc37.noarch perl-ExtUtils-MakeMaker-2:7.64-490.fc37.noarch perl-ExtUtils-Manifest-1:1.73-489.fc37.noarch perl-ExtUtils-ParseXS-1:3.45-489.fc37.noarch perl-Fcntl-1.15-492.fc38.i686 perl-Fedora-VSP-0.001-30.fc38.noarch perl-File-Basename-2.85-492.fc38.noarch perl-File-Compare-1.100.700-492.fc38.noarch perl-File-Copy-2.39-492.fc38.noarch perl-File-Find-1.40-492.fc38.noarch perl-File-Path-2.18-489.fc37.noarch perl-File-Temp-1:0.231.100-489.fc37.noarch perl-File-stat-1.12-492.fc38.noarch perl-FileHandle-2.03-492.fc38.noarch perl-Getopt-Long-1:2.54-1.fc38.noarch perl-Getopt-Std-1.13-492.fc38.noarch perl-Guard-1.023-25.fc37.i686 perl-HTTP-Tiny-0.082-1.fc37.noarch perl-IO-1.50-492.fc38.i686 perl-IO-AIO-4.79-1.fc38.i686 perl-IO-Compress-2.201-3.fc37.noarch perl-IO-Socket-IP-0.41-490.fc37.noarch perl-IO-Socket-SSL-2.078-1.fc38.noarch perl-IPC-Open3-1.22-492.fc38.noarch perl-MIME-Base64-3.16-489.fc37.i686 perl-Net-HTTP-6.22-4.fc38.noarch perl-Net-SSLeay-1.92-4.fc37.i686 perl-POSIX-2.03-492.fc38.i686 perl-PathTools-3.84-489.fc37.i686 perl-Pod-Escapes-1:1.07-489.fc37.noarch perl-Pod-Perldoc-3.28.01-490.fc37.noarch perl-Pod-Simple-1:3.43-490.fc37.noarch perl-Pod-Usage-4:2.03-3.fc37.noarch perl-Scalar-List-Utils-5:1.63-489.fc38.i686 perl-SelectSaver-1.02-492.fc38.noarch perl-Socket-4:2.036-1.fc38.i686 perl-Storable-1:3.26-489.fc37.i686 perl-Symbol-1.09-492.fc38.noarch perl-Term-ANSIColor-5.01-490.fc37.noarch perl-Term-Cap-1.17-489.fc37.noarch perl-Test-Harness-1:3.44-490.fc37.noarch perl-Text-ParseWords-3.31-489.fc37.noarch perl-Text-Tabs+Wrap-2021.0814-489.fc37.noarch perl-Time-HiRes-4:1.9770-489.fc37.i686 perl-Time-Local-2:1.300-489.fc37.noarch perl-URI-5.17-1.fc38.noarch perl-base-2.27-492.fc38.noarch perl-common-sense-3.7.5-10.fc37.i686 perl-constant-1.33-490.fc37.noarch perl-devel-4:5.36.0-492.fc38.i686 perl-generators-1.15-1.fc38.noarch perl-if-0.61.000-492.fc38.noarch perl-interpreter-4:5.36.0-492.fc38.i686 perl-lib-0.65-492.fc38.i686 perl-libnet-3.14-490.fc37.noarch perl-libs-4:5.36.0-492.fc38.i686 perl-locale-1.10-492.fc38.noarch perl-macros-4:5.36.0-492.fc38.noarch perl-mro-1.26-492.fc38.i686 perl-overload-1.35-492.fc38.noarch perl-overloading-0.02-492.fc38.noarch perl-parent-1:0.239-1.fc38.noarch perl-podlators-1:5.00-1.fc38.noarch perl-vars-1.05-492.fc38.noarch perl-version-8:0.99.29-490.fc37.i686 python-pip-wheel-22.3.1-1.fc38.noarch python-setuptools-wheel-65.5.1-1.fc38.noarch python3-3.11.1-1.fc38.i686 python3-libs-3.11.1-1.fc38.i686 python3-pyparsing-3.0.9-2.fc37.noarch systemtap-sdt-devel-4.8~pre16650659g6a096a7d-1.fc38.i686 Complete! Finish: build setup for perl-Coro-Multicore-1.07-5.fc38.src.rpm Start: rpmbuild perl-Coro-Multicore-1.07-5.fc38.src.rpm Building target platforms: i686 Building for target i686 setting SOURCE_DATE_EPOCH=1658448000 Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.ioRvw9 + umask 022 + cd /builddir/build/BUILD + cd /builddir/build/BUILD + rm -rf Coro-Multicore-1.07 + /usr/lib/rpm/rpmuncompress -x /builddir/build/SOURCES/Coro-Multicore-1.07.tar.gz + STATUS=0 + '[' 0 -ne 0 ']' + cd Coro-Multicore-1.07 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + echo 'Patch #0 (Coro-Multicore-0.02-Declare-POD-encoding.patch):' Patch #0 (Coro-Multicore-0.02-Declare-POD-encoding.patch): + /usr/bin/patch --no-backup-if-mismatch -f -p1 --fuzz=0 patching file Multicore.pm + echo 'Patch #1 (Coro-Multicore-1.04-Fix-passing-context.patch):' Patch #1 (Coro-Multicore-1.04-Fix-passing-context.patch): + /usr/bin/patch --no-backup-if-mismatch -f -p1 --fuzz=0 patching file Multicore.xs Hunk #2 succeeded at 216 (offset 9 lines). Hunk #3 succeeded at 241 (offset 9 lines). Hunk #4 succeeded at 256 (offset 9 lines). Hunk #5 succeeded at 328 (offset 17 lines). patching file perlmulticore.h + RPM_EC=0 ++ jobs -p + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.ontod8 + umask 022 + cd /builddir/build/BUILD + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m32 -march=i686 -mtune=generic -msse2 -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' + export CFLAGS + CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m32 -march=i686 -mtune=generic -msse2 -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' + export CXXFLAGS + FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m32 -march=i686 -mtune=generic -msse2 -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib/gfortran/modules' + export FFLAGS + FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m32 -march=i686 -mtune=generic -msse2 -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib/gfortran/modules' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd Coro-Multicore-1.07 + export CORO_MULTICORE_CHECK=0 PERL_CANARY_STABILITY_NOPROMPT=1 + CORO_MULTICORE_CHECK=0 + PERL_CANARY_STABILITY_NOPROMPT=1 + perl Makefile.PL INSTALLDIRS=vendor NO_PACKLIST=1 NO_PERLLOCAL=1 'OPTIMIZE=-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m32 -march=i686 -mtune=generic -msse2 -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' *** *** Canary::Stability COMPATIBILITY AND SUPPORT CHECK *** ================================================= *** *** Hi! *** *** I do my best to provide predictable and reliable software. *** *** However, in recent releases, P5P (who maintain perl) have been *** introducing regressions that are sometimes subtle and at other times *** catastrophic, often for personal preferences with little or no concern *** for existing code, most notably CPAN. *** *** For this reason, it has become very hard for me to maintain the level *** of reliability and support I have committed myself to in the past, at *** least with some perl versions: I simply can't keep up working around new *** bugs or gratituous incompatibilities, and in turn you might suffer from *** unanticipated problems. *** *** Therefore I have introduced a support and compatibility check, the results *** of which follow below, together with a FAQ and some recommendations. *** *** This check is just to let you know that there might be a risk, so you can *** make judgement calls on how to proceed - it will not keep the module from *** installing or working. *** *** The stability canary says: (nothing, it was driven away by harsh weather) *** *** It seems you are running perl version 5.036000, likely the "official" or *** "standard" version. While there is nothing wrong with doing that, *** standard perl versions 5.022 and up are not supported by Coro::Multicore. *** While this might be fatal, it might also be all right - if you run into *** problems, you might want to downgrade your perl or switch to the *** stability branch. *** *** If everything works fine, you can ignore this message. *** *** *** Stability canary mini-FAQ: *** *** Do I need to do anything? *** With luck, no. While some distributions are known to fail *** already, most should probably work. This message is here *** to alert you that your perl is not supported by Coro::Multicore, *** and if things go wrong, you either need to downgrade, or *** sidegrade to the stability variant of your perl version, *** or simply live with the consequences. *** *** What is this canary thing? *** It's purpose is to check support status of Coro::Multicore with *** respect to your perl version. *** *** What is this "stability branch"? *** It's a branch or fork of the official perl, by schmorp, to *** improve stability and compatibility with existing modules. *** *** How can I skip this prompt on automated installs? *** Set PERL_CANARY_STABILITY_NOPROMPT=1 in your environment. *** More info is in the Canary::Stability manpage. *** *** Long version of this FAQ: http://stableperl.schmorp.de/faq.html *** Stability Branch homepage: http://stableperl.schmorp.de/ *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro::Multicore can do some simple checks to make sure perlinterp_release is called only with a valid perl context, and perlinterp_acquire without ensuring that they are always called in proper pairs. This is very useful while developing XS modules using perlmulticore.h. This costs a bit of performance though, so it is disabled by default. The environment variable CORO_MULTICORE_CHECK can be used to set a default for this answer. Enable extra checks? [n] n Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Coro::Multicore + /usr/bin/make -O -j2 V=1 VERBOSE=1 Running Mkbootstrap for Multicore () chmod 644 "Multicore.bs" cp Multicore.pm blib/lib/Coro/Multicore.pm "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Multicore.bs blib/arch/auto/Coro/Multicore/Multicore.bs 644 "/usr/bin/perl" "/usr/share/perl5/vendor_perl/ExtUtils/xsubpp" -typemap '/usr/share/perl5/ExtUtils/typemap' Multicore.xs > Multicore.xsc mv Multicore.xsc Multicore.c gcc -c -I/usr/lib/perl5/Coro -D_REENTRANT -D_GNU_SOURCE -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m32 -march=i686 -mtune=generic -msse2 -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m32 -march=i686 -mtune=generic -msse2 -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -DVERSION=\"1.07\" -DXS_VERSION=\"1.07\" -fPIC "-I/usr/lib/perl5/CORE" -DRECURSION_CHECK=0 Multicore.c In file included from Multicore.xs:18: perlmulticore.h:195:8: warning: initialization of 'void (*)(PerlInterpreter *)' {aka 'void (*)(struct interpreter *)'} from incompatible pointer type 'void (*)(void)' [-Wincompatible-pointer-types] 195 | = { perl_multicore_init, 0 }; | ^~~~~~~~~~~~~~~~~~~ perlmulticore.h:195:8: note: (near initialization for 'perl_multicore_api_init.pmapi_release') Multicore.xs: In function 'thread_proc': Multicore.xs:143:9: warning: unused variable 'catchret' [-Wunused-variable] 143 | int catchret; | ^~~~~~~~ In file included from Multicore.xs:17: Multicore.xs: In function 'boot_Coro__Multicore': /usr/lib/perl5/Coro/CoroAPI.h:122:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 122 | GCoroAPI = (struct CoroAPI*) SvIV (sv); \ | ^ Multicore.xs:328:9: note: in expansion of macro 'I_CORO_API' 328 | I_CORO_API ("Coro::Multicore"); | ^~~~~~~~~~ In file included from Multicore.xs:19: schmorp.h: In function 's_epipe_signal': schmorp.h:452:5: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result] 452 | write (epp->fd [1], &counter, (epp->len = 8)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Multicore.xs: In function 'thread_proc': Multicore.xs:187:1: warning: control reaches end of non-void function [-Wreturn-type] 187 | } | ^ schmorp.h: In function 's_epipe_drain': schmorp.h:465:3: warning: ignoring return value of 'read' declared with attribute 'warn_unused_result' [-Wunused-result] 465 | read (epp->fd [0], buf, sizeof (buf)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Multicore.xs: At top level: Multicore.xs:50:1: warning: 'fatal' defined but not used [-Wunused-function] 50 | fatal (const char *msg) | ^~~~~ schmorp.h:503:1: warning: 's_epipe_wait' defined but not used [-Wunused-function] 503 | s_epipe_wait (s_epipe *epp) | ^~~~~~~~~~~~ schmorp.h:423:1: warning: 's_epipe_destroy' defined but not used [-Wunused-function] 423 | s_epipe_destroy (s_epipe *epp) | ^~~~~~~~~~~~~~~ schmorp.h:222:1: warning: 's_gensub' defined but not used [-Wunused-function] 222 | s_gensub (pTHX_ void (*xsub)(pTHX_ CV *), void *arg) | ^~~~~~~~ schmorp.h:200:1: warning: 's_get_cv_croak' defined but not used [-Wunused-function] 200 | s_get_cv_croak (SV *cb_sv) | ^~~~~~~~~~~~~~ schmorp.h:176:1: warning: 's_fileno_croak' defined but not used [-Wunused-function] 176 | s_fileno_croak (SV *fh, int wr) | ^~~~~~~~~~~~~~ schmorp.h:141:1: warning: 's_signum_croak' defined but not used [-Wunused-function] 141 | s_signum_croak (SV *sig) | ^~~~~~~~~~~~~~ rm -f blib/arch/auto/Coro/Multicore/Multicore.so gcc -lpthread -shared -Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -L/usr/local/lib -fstack-protector-strong Multicore.o -o blib/arch/auto/Coro/Multicore/Multicore.so \ -lpthread -lperl \ chmod 755 blib/arch/auto/Coro/Multicore/Multicore.so Manifying 1 pod document + pod2man perlmulticore.h + RPM_EC=0 ++ jobs -p + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.DP0wPQ + umask 022 + cd /builddir/build/BUILD + '[' /builddir/build/BUILDROOT/perl-Coro-Multicore-1.07-5.fc38.i386 '!=' / ']' + rm -rf /builddir/build/BUILDROOT/perl-Coro-Multicore-1.07-5.fc38.i386 ++ dirname /builddir/build/BUILDROOT/perl-Coro-Multicore-1.07-5.fc38.i386 + mkdir -p /builddir/build/BUILDROOT + mkdir /builddir/build/BUILDROOT/perl-Coro-Multicore-1.07-5.fc38.i386 + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m32 -march=i686 -mtune=generic -msse2 -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' + export CFLAGS + CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m32 -march=i686 -mtune=generic -msse2 -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' + export CXXFLAGS + FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m32 -march=i686 -mtune=generic -msse2 -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib/gfortran/modules' + export FFLAGS + FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m32 -march=i686 -mtune=generic -msse2 -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib/gfortran/modules' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd Coro-Multicore-1.07 + /usr/bin/make install DESTDIR=/builddir/build/BUILDROOT/perl-Coro-Multicore-1.07-5.fc38.i386 'INSTALL=/usr/bin/install -p' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Multicore.bs blib/arch/auto/Coro/Multicore/Multicore.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /builddir/build/BUILDROOT/perl-Coro-Multicore-1.07-5.fc38.i386/usr/lib/perl5/vendor_perl/auto/Coro/Multicore/Multicore.so Installing /builddir/build/BUILDROOT/perl-Coro-Multicore-1.07-5.fc38.i386/usr/lib/perl5/vendor_perl/Coro/Multicore.pm Installing /builddir/build/BUILDROOT/perl-Coro-Multicore-1.07-5.fc38.i386/usr/share/man/man3/Coro::Multicore.3pm + find /builddir/build/BUILDROOT/perl-Coro-Multicore-1.07-5.fc38.i386 -type f -name '*.bs' -size 0 -delete + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /builddir/build/BUILDROOT/perl-Coro-Multicore-1.07-5.fc38.i386/usr + install -d /builddir/build/BUILDROOT/perl-Coro-Multicore-1.07-5.fc38.i386//usr/include + install -m 0644 perlmulticore.h /builddir/build/BUILDROOT/perl-Coro-Multicore-1.07-5.fc38.i386//usr/include + install -d /builddir/build/BUILDROOT/perl-Coro-Multicore-1.07-5.fc38.i386//usr/share/man/man3 + install -m 0644 perlmulticore.h.3 /builddir/build/BUILDROOT/perl-Coro-Multicore-1.07-5.fc38.i386//usr/share/man/man3 + mkdir -p /builddir/build/BUILDROOT/perl-Coro-Multicore-1.07-5.fc38.i386/usr/libexec/perl-Coro-Multicore + cp -a t /builddir/build/BUILDROOT/perl-Coro-Multicore-1.07-5.fc38.i386/usr/libexec/perl-Coro-Multicore + cat + chmod +x /builddir/build/BUILDROOT/perl-Coro-Multicore-1.07-5.fc38.i386/usr/libexec/perl-Coro-Multicore/test + /usr/bin/find-debuginfo -j2 --strict-build-id -m -i --build-id-seed 1.07-5.fc38 --unique-debug-suffix -1.07-5.fc38.i386 --unique-debug-src-base perl-Coro-Multicore-1.07-5.fc38.i386 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 50000000 -S debugsourcefiles.list /builddir/build/BUILD/Coro-Multicore-1.07 extracting debug info from /builddir/build/BUILDROOT/perl-Coro-Multicore-1.07-5.fc38.i386/usr/lib/perl5/vendor_perl/auto/Coro/Multicore/Multicore.so original debug info size: 84kB, size after compression: 80kB /usr/bin/sepdebugcrcfix: Updated 1 CRC32s, 0 CRC32s did match. 96 blocks + /usr/lib/rpm/check-buildroot + /usr/lib/rpm/redhat/brp-ldconfig + /usr/lib/rpm/brp-compress + /usr/lib/rpm/redhat/brp-strip-lto /usr/bin/strip + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/check-rpaths + /usr/lib/rpm/redhat/brp-mangle-shebangs mangling shebang in /usr/libexec/perl-Coro-Multicore/test from /bin/sh to #!/usr/bin/sh + /usr/lib/rpm/brp-remove-la-files + /usr/lib/rpm/redhat/brp-python-bytecompile '' 1 0 + /usr/lib/rpm/redhat/brp-python-hardlink Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.3JXFcF + umask 022 + cd /builddir/build/BUILD + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m32 -march=i686 -mtune=generic -msse2 -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' + export CFLAGS + CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m32 -march=i686 -mtune=generic -msse2 -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' + export CXXFLAGS + FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m32 -march=i686 -mtune=generic -msse2 -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib/gfortran/modules' + export FFLAGS + FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m32 -march=i686 -mtune=generic -msse2 -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib/gfortran/modules' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd Coro-Multicore-1.07 ++ perl -e 'if ($ARGV[0] =~ /.*-j([0-9][0-9]*).*/) {print $1} else {print 1}' -- -j2 + export HARNESS_OPTIONS=j2 + HARNESS_OPTIONS=j2 + make test "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Multicore.bs blib/arch/auto/Coro/Multicore/Multicore.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00_load.t ... ok t/01_basic.t .. ok All tests successful. Files=2, Tests=8, 2 wallclock secs ( 0.01 usr 0.00 sys + 0.03 cusr 0.00 csys = 0.04 CPU) Result: PASS + RPM_EC=0 ++ jobs -p + exit 0 Processing files: perl-Coro-Multicore-1.07-5.fc38.i686 Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.G59K8G + umask 022 + cd /builddir/build/BUILD + cd Coro-Multicore-1.07 + DOCDIR=/builddir/build/BUILDROOT/perl-Coro-Multicore-1.07-5.fc38.i386/usr/share/doc/perl-Coro-Multicore + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/perl-Coro-Multicore-1.07-5.fc38.i386/usr/share/doc/perl-Coro-Multicore + cp -pr Changes /builddir/build/BUILDROOT/perl-Coro-Multicore-1.07-5.fc38.i386/usr/share/doc/perl-Coro-Multicore + cp -pr README /builddir/build/BUILDROOT/perl-Coro-Multicore-1.07-5.fc38.i386/usr/share/doc/perl-Coro-Multicore + RPM_EC=0 ++ jobs -p + exit 0 Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.dimw0O + umask 022 + cd /builddir/build/BUILD + cd Coro-Multicore-1.07 + LICENSEDIR=/builddir/build/BUILDROOT/perl-Coro-Multicore-1.07-5.fc38.i386/usr/share/licenses/perl-Coro-Multicore + export LC_ALL=C + LC_ALL=C + export LICENSEDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/perl-Coro-Multicore-1.07-5.fc38.i386/usr/share/licenses/perl-Coro-Multicore + cp -pr COPYING /builddir/build/BUILDROOT/perl-Coro-Multicore-1.07-5.fc38.i386/usr/share/licenses/perl-Coro-Multicore + RPM_EC=0 ++ jobs -p + exit 0 Provides: perl(Coro::Multicore) = 1.07 perl-Coro-Multicore = 1.07-5.fc38 perl-Coro-Multicore(x86-32) = 1.07-5.fc38 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: ld-linux.so.2 ld-linux.so.2(GLIBC_2.3) libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.11) libc.so.6(GLIBC_2.2) libc.so.6(GLIBC_2.28) libc.so.6(GLIBC_2.3.2) libc.so.6(GLIBC_2.32) libc.so.6(GLIBC_2.34) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libperl.so.5.36 perl(XSLoader) rtld(GNU_HASH) Processing files: perlmulticore-devel-1.07-5.fc38.i686 Provides: perlmulticore-devel = 1.07-5.fc38 perlmulticore-devel(x86-32) = 1.07-5.fc38 perlmulticore-static = 1.07-5.fc38 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Processing files: perl-Coro-Multicore-tests-1.07-5.fc38.noarch Provides: perl-Coro-Multicore-tests = 1.07-5.fc38 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /usr/bin/sh perl(Coro::AnyEvent) perl(Coro::Multicore) Processing files: perl-Coro-Multicore-debugsource-1.07-5.fc38.i686 Provides: perl-Coro-Multicore-debugsource = 1.07-5.fc38 perl-Coro-Multicore-debugsource(x86-32) = 1.07-5.fc38 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Processing files: perl-Coro-Multicore-debuginfo-1.07-5.fc38.i686 Provides: debuginfo(build-id) = f05237a5e96e440c9ca499b6a8f0197a38d009e0 perl-Coro-Multicore-debuginfo = 1.07-5.fc38 perl-Coro-Multicore-debuginfo(x86-32) = 1.07-5.fc38 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Recommends: perl-Coro-Multicore-debugsource(x86-32) = 1.07-5.fc38 Checking for unpackaged file(s): /usr/lib/rpm/check-files /builddir/build/BUILDROOT/perl-Coro-Multicore-1.07-5.fc38.i386 Wrote: /builddir/build/RPMS/perl-Coro-Multicore-1.07-5.fc38.i686.rpm Wrote: /builddir/build/RPMS/perl-Coro-Multicore-debuginfo-1.07-5.fc38.i686.rpm Wrote: /builddir/build/RPMS/perlmulticore-devel-1.07-5.fc38.i686.rpm Wrote: /builddir/build/RPMS/perl-Coro-Multicore-debugsource-1.07-5.fc38.i686.rpm Wrote: /builddir/build/RPMS/perl-Coro-Multicore-tests-1.07-5.fc38.noarch.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.i1MSgh + umask 022 + cd /builddir/build/BUILD + cd Coro-Multicore-1.07 + /usr/bin/rm -rf /builddir/build/BUILDROOT/perl-Coro-Multicore-1.07-5.fc38.i386 + RPM_EC=0 ++ jobs -p + exit 0 Executing(rmbuild): /bin/sh -e /var/tmp/rpm-tmp.Tksm8A + umask 022 + cd /builddir/build/BUILD + rm -rf Coro-Multicore-1.07 Coro-Multicore-1.07.gemspec + RPM_EC=0 ++ jobs -p + exit 0 Finish: rpmbuild perl-Coro-Multicore-1.07-5.fc38.src.rpm Finish: build phase for perl-Coro-Multicore-1.07-5.fc38.src.rpm INFO: chroot_scan: 3 files copied to /var/lib/copr-rpmbuild/results/chroot_scan INFO: /var/lib/mock/fedora-rawhide-i686-1672119885.721026/root/var/log/dnf.rpm.log /var/lib/mock/fedora-rawhide-i686-1672119885.721026/root/var/log/dnf.librepo.log /var/lib/mock/fedora-rawhide-i686-1672119885.721026/root/var/log/dnf.log INFO: Done(/var/lib/copr-rpmbuild/results/perl-Coro-Multicore-1.07-5.fc38.src.rpm) Config(child) 0 minutes 31 seconds INFO: Results and/or logs in: /var/lib/copr-rpmbuild/results INFO: Cleaning up build root ('cleanup_on_success=True') Start: clean chroot INFO: unmounting tmpfs. Finish: clean chroot Finish: run Running RPMResults tool