Changelog

• lib: fix gfx and media activity for Strix Point, Krackan Point and Strix Halo (#139)
• lib: improve to_d3hot check logic (#142)
• lib: improve cpu usage calculation
• lib: update kfd process detection logic
• lib: rename "Ring List Controller" to "RunList Controller"
• lib: apply input power workaround for SMU v13.0.5 to Granite Ridge only

• tui: fix xdna fdinfo header
• tui: print throttle_residency_* for gpu_metrics_v3_0

• gui: print throttle_residency_* for gpu_metrics_v3_0
• gui: use `max_od_gpu_clk` and `max_od_mem_clk` for Sensors plot
• gui: persist GUI mode
• gui: use GpuMetrics::get_throttle_status_info
• gui: persist main tab and info tab

Changelog

• fix Appstream metainfo by @malfisya
• fix the process to get gpu_metrics when resuming from suspended state
• stop monitoring when no VRAM-using processes are found
• fix getting sensors when resuming monitoring
• stop reading PC (GRBM, GRBM2) for RDNA 4 dGPU when no VRAM-using processes are found
• add exclude process names (<code>amdgpu_top</code>, <code>steamwebhelper</code>) for no_process_using_vram
• add memory_vendor to AppDeviceInfo
• fix DevicePath::init when libdrm_amdgpu is None (#133)
• fix combination of <code>--single/--single-gpu</code> and <code>--pci</code> options (#134)
• reorder the device path list if a device is specified in the options
• add support for FCLK (Fabric Clock) DPM
• update vram usage when pre-dropping device handle
• update logic for dropping device handle
• add supports_gpu_metrics field to AppDeviceInfo
• fix get_rocm_version for TheRock
• remove dependency on anyhow

• xdna: update bindings for 32bit targets

• tui: do not display average_socket_power if gpu_metrics_v3_0
• tui: clear gpu_metrics_view when metrics is None
• tui: check stapm_limit and current_stapm_limit

• smi: print the suspended state
• smi: print PCI power state
• smi: set FdInfoSortType::GTT when the device is APU
• smi: print junction temp instead of edge temp, if junction temp is available
• smi: add memory temp.
• smi: remove ECC status
• smi: update layout for the suspending device

• gui: do not display average_socket_power if gpu_metrics_v3_0
• gui: add tab_gui mode
• gui: set striped to side panel

• add some info to json_info dump (#137)

Changelog

• ci: use xbuild for build appimage
• lib: add cpu and vcn_unified fields to FdInfoUsage
• lib: add VCNU to FdInfoSortType
• lib: add fw_versions fieled to AppDeviceInfo
• cleanup dump_info
• fix build without tui feature
• add dynamically linked musl binary to release

• smi: display CPU Core freq
• tui: fix vpe label
• tui: add support for cpu core freq
• tui: use VCNU (vcn_unified) instead of VCN (media, avg. of dec/enc/jpeg_dec)
• tui: update cursive version

• gui: if gpu_metrics_v2_0/v2_1 then check core_temp and core_power and enable cpu_temp_plot and cpu_power_plot accordingly
• gui: add support for cpu core freq
• gui: use VCNU instead of VCN (media)
• gui: update eframe and egui_plot version

• json: add support for cpu core freq
• json: add support for critical/emergency temp

Changelog

• Rust 2024 Edition
• add support for k10temp Tctl
• dynamically update power_cap
• implement workaround for Raphael/Granite Ridge APU reported input power
• implement workaround for RDNA 4 dGPU (SMU v14.0.2/3) dose not have fan1_input
• skip show fdinfo stat if ids_count is zero

• tui: update info_bar

• gui: if gpu_metrics_v2_0 or gpu_metrics_v2_1, do not display cpu temp/power plot

• xdna: update xdna bindings
• xdna: print app version when dumping xdna info

Changelog

• fix filter_proc when short cmdline
• update dump_xdna_device

Changelog

• reduce allocations and improve dump commands
• support for dynamic loading of libdrm and libdrm_amdgpu (amdgpu_top remains a dynamic link)
• specify rev of libdrm_amdgpu_sys
• add fdinfo description in README.md
• Add remark to build on Fedora (#117)
• update release.yml
• update DevicePath::check_if_device_is_active for env where CONFIG_PM is disabled

• xdna: fix the detection of XDNA NPU
• xdna: impl ioctl for amdxdna-driver

• tui: add "--hide-fdinfo" option for TUI mode
• tui: hideable_panel
• tui: collapsible view in one row

• gui: Add Georgian tranlsation (#116)

Changelog

• Include CHIP_GFX1103_R1X (Hawk Point1) in has_npu condition
• Update libdrm_amdgpu_sys, fix CHIP_CLASS check for GFX12
• Add description of --xdna option

• tui: Add new layout for wide term (150 or more columns)

• gui: Fix "No localization for id"
• gui: Add CPU Core Power Plot
• gui: Add CPU Temperature Plot
• gui: Add VCLK/DCLK Plot
• gui: Persist selected PCI bus

Changelog

• Support for AMD XDNA NPU
• Update libdrm_amdgpu_sys
• Update GRBM2_INDEX
• Remove amd_.*_visible_vram fields in FdInfoUsage
• Stop using get_unchecked
• Implement dynamic_no_pc
• Add --gl and --vk options

• gui: Support for the Close shortcut key
• gui: Add the Quit button
• gui: Update eframe to v0.29
• gui: Update versions of i18n-embed and i18n-embed-fl
• gui: Use LazyLock instead of once_cell
• Use wgpu feature

Changelog

• Support for suspended devices in TUI mode and GUI mode. If there are no active AMDGPU devices, amdgpu_top wake up a suspended device.

• tui: add Activity view

• gui: fix full_fdinfo_list
• gui: add Activity plot
• gui: persist show sidepanel state and theme