Warning: Permanently added '172.25.82.160' (ECDSA) to the list of known hosts. Task: {'build_id': 678698, 'buildroot_pkgs': [], 'chroot': 'fedora-rawhide-x86_64', 'enable_net': True, 'git_hash': 'd90a2b6491a92be5fddca16c69667cdec7f29233', 'git_repo': 'jkastner/openocd/libjaylink', 'memory_reqs': 2048, 'package_name': 'libjaylink', 'package_version': '0.1.0-1.fc26', 'project_name': 'openocd', 'project_owner': 'jkastner', 'repos': [{'id': 'copr_base', 'name': 'Copr repository', 'url': 'https://copr-be.cloud.fedoraproject.org/results/jkastner/openocd/fedora-rawhide-x86_64/'}], 'source_json': '{"clone_url": "http://copr-dist-git.fedorainfracloud.org/git/jkastner/openocd/libjaylink.git", ' '"committish": "d90a2b6491a92be5fddca16c69667cdec7f29233"}', 'source_type': 8, 'submitter': 'jkastner', 'task_id': '678698-fedora-rawhide-x86_64', 'timeout': 64800, 'use_bootstrap_container': True} Running: git clone http://copr-dist-git.fedorainfracloud.org/git/jkastner/openocd/libjaylink.git /tmp/tmpwlu_8lv4/libjaylink --depth 500 --no-single-branch cmd: ['git', 'clone', 'http://copr-dist-git.fedorainfracloud.org/git/jkastner/openocd/libjaylink.git', '/tmp/tmpwlu_8lv4/libjaylink', '--depth', '500', '--no-single-branch'] cwd: . rc: 0 stdout: stderr: Cloning into '/tmp/tmpwlu_8lv4/libjaylink'... Running: git checkout d90a2b6491a92be5fddca16c69667cdec7f29233 cmd: ['git', 'checkout', 'd90a2b6491a92be5fddca16c69667cdec7f29233'] cwd: /tmp/tmpwlu_8lv4/libjaylink rc: 0 stdout: stderr: Note: checking out 'd90a2b6491a92be5fddca16c69667cdec7f29233'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by performing another checkout. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -b with the checkout command again. Example: git checkout -b HEAD is now at d90a2b6... automatic import of libjaylink 0.1.0-1.fc26 Running: cp -r . /tmp/tmpgmuwocej cmd: ['cp', '-r', '.', '/tmp/tmpgmuwocej'] cwd: /tmp/tmpwlu_8lv4/libjaylink rc: 0 stdout: stderr: Generated rpkg config: [distgit] lookaside = http://copr-dist-git.fedorainfracloud.org/repo/pkgs/%(ns2)s/%(ns1)s/%(pkg)s/%(filename)s/%(hashtype)s/%(hash)s/%(filename)s anongiturl = http://copr-dist-git.fedorainfracloud.org/git/%(module)s Running: rpkg -C /tmp/tmpwlu_8lv4/rpkg.conf sources --outdir /tmp/tmpgmuwocej cmd: ['rpkg', '-C', '/tmp/tmpwlu_8lv4/rpkg.conf', 'sources', '--outdir', '/tmp/tmpgmuwocej'] cwd: /tmp/tmpwlu_8lv4/libjaylink rc: 0 stdout: Downloading libjaylink-0.1.0.tar.gz stderr: {'task_id': '678698-fedora-rawhide-x86_64', 'chroot': 'fedora-rawhide-x86_64', 'buildroot_pkgs': [], 'enable_net': True, 'repos': [{'id': 'copr_base', 'name': 'Copr repository', 'url': 'https://copr-be.cloud.fedoraproject.org/results/jkastner/openocd/fedora-rawhide-x86_64/'}], 'use_bootstrap_container': True, 'pkg_manager_conf': 'yum', 'timeout': 64800, 'sourcedir': '/tmp/tmpgmuwocej', 'resultdir': '/var/lib/copr-rpmbuild/results', 'config': , 'logfile': '/var/lib/copr-rpmbuild/main.log'} /usr/bin/tail: /var/lib/copr-rpmbuild/main.log: file truncated Running: unbuffer /usr/bin/mock --buildsrpm --spec /tmp/tmpgmuwocej/libjaylink.spec --sources /tmp/tmpgmuwocej --configdir /var/lib/copr-rpmbuild/results/configs --resultdir /var/lib/copr-rpmbuild/results --define %_disable_source_fetch 0 --uniqueext 1511428684.009244 -r child WARNING: Could not find required logging config file: /var/lib/copr-rpmbuild/results/configs/logging.ini. Using default... INFO: mock.py version 1.4.4 starting (python version = 3.6.3)... Start(bootstrap): init plugins INFO: tmpfs initialized INFO: selinux enabled INFO: compress_logs: initialized Finish(bootstrap): init plugins Start: init plugins INFO: tmpfs initialized INFO: selinux enabled INFO: compress_logs: initialized Finish: init plugins Start: run INFO: Start(/tmp/tmpgmuwocej/libjaylink.spec) Config(678698-fedora-rawhide-x86_64) Start: clean chroot Finish: clean chroot Start(bootstrap): chroot init INFO: mounting tmpfs at /var/lib/mock/678698-fedora-rawhide-x86_64-bootstrap-1511428684.009244/root. INFO: calling preinit hooks INFO: enabled root cache INFO: enabled HW Info plugin Mock Version: 1.4.4 INFO: Mock Version: 1.4.4 Start(bootstrap): dnf install fedora 38 MB/s | 59 MB 00:01 Failed to synchronize cache for repo 'copr_base', disabling. Last metadata expiration check: 0:00:22 ago on Thu 23 Nov 2017 09:18:06 AM UTC. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: distribution-gpg-keys noarch 1.16-1.fc28 fedora 165 k dnf noarch 2.7.5-3.fc28 fedora 350 k dnf-plugins-core noarch 2.1.5-1.fc28 fedora 51 k Installing dependencies: acl x86_64 2.2.52-18.fc27 fedora 78 k audit-libs x86_64 2.8.1-1.fc28 fedora 111 k basesystem noarch 11-4.fc27 fedora 8.9 k bash x86_64 4.4.12-13.fc28 fedora 1.5 M bzip2-libs x86_64 1.0.6-24.fc27 fedora 46 k ca-certificates noarch 2017.2.16-4.fc27 fedora 452 k chkconfig x86_64 1.10-3.fc27 fedora 186 k compat-openssl10 x86_64 1:1.0.2m-1.fc28 fedora 1.1 M coreutils x86_64 8.28-2.fc28 fedora 1.2 M coreutils-common x86_64 8.28-2.fc28 fedora 1.9 M cracklib x86_64 2.9.6-9.fc28 fedora 87 k crypto-policies noarch 20171115-1.git921600e.fc28 fedora 37 k cryptsetup-libs x86_64 2.0.0-0.5.fc28 fedora 285 k curl x86_64 7.56.1-1.fc28 fedora 335 k cyrus-sasl-lib x86_64 2.1.26-35.fc28 fedora 161 k dbus x86_64 1:1.12.0-1.fc28 fedora 266 k dbus-libs x86_64 1:1.12.0-1.fc28 fedora 178 k deltarpm x86_64 3.6-24.fc27 fedora 90 k device-mapper x86_64 1.02.145-1.fc28 fedora 359 k device-mapper-libs x86_64 1.02.145-1.fc28 fedora 392 k dnf-conf noarch 2.7.5-3.fc28 fedora 69 k elfutils-default-yama-scope noarch 0.170-1.fc27 fedora 39 k elfutils-libelf x86_64 0.170-1.fc27 fedora 204 k elfutils-libs x86_64 0.170-1.fc27 fedora 283 k emacs-filesystem noarch 1:25.3-3.fc28 fedora 67 k expat x86_64 2.2.5-1.fc28 fedora 103 k fedora-gpg-keys noarch 28-0.3 fedora 93 k fedora-release noarch 28-0.1 fedora 25 k fedora-repos noarch 28-0.3 fedora 8.1 k fedora-repos-rawhide noarch 28-0.3 fedora 7.7 k file-libs x86_64 5.32-1.fc28 fedora 514 k filesystem x86_64 3.6-1.fc28 fedora 1.1 M gawk x86_64 4.2.0-1.fc28 fedora 1.1 M gc x86_64 7.6.0-7.fc27 fedora 110 k gdbm x86_64 1.13-3.fc27 fedora 157 k glib2 x86_64 2.54.2-1.fc28 fedora 2.4 M glibc x86_64 2.26.9000-27.fc28 fedora 3.4 M glibc-all-langpacks x86_64 2.26.9000-27.fc28 fedora 7.7 M glibc-common x86_64 2.26.9000-27.fc28 fedora 789 k gmp x86_64 1:6.1.2-6.fc27 fedora 280 k gnupg2 x86_64 2.2.2-2.fc28 fedora 2.3 M gnutls x86_64 3.6.1-2.fc28 fedora 728 k gpgme x86_64 1.9.0-8.fc28 fedora 231 k grep x86_64 3.1-3.fc27 fedora 270 k guile x86_64 5:2.0.14-4.fc28 fedora 3.5 M gzip x86_64 1.8-4.fc27 fedora 160 k ima-evm-utils x86_64 1.0-2.fc28 fedora 49 k info x86_64 6.5-1.fc28 fedora 193 k iptables-libs x86_64 1.6.1-5.fc28 fedora 90 k json-c x86_64 0.12.1-4.fc27 fedora 30 k keyutils-libs x86_64 1.5.10-3.fc27 fedora 32 k kmod-libs x86_64 24-3.fc27 fedora 62 k krb5-libs x86_64 1.16-0.beta1.4.fc28 fedora 812 k libacl x86_64 2.2.52-18.fc27 fedora 33 k libarchive x86_64 3.3.1-3.fc27 fedora 355 k libargon2 x86_64 20161029-2.fc28 fedora 27 k libassuan x86_64 2.4.3-6.fc27 fedora 76 k libatomic_ops x86_64 7.4.6-3.fc27 fedora 33 k libattr x86_64 2.4.47-21.fc27 fedora 25 k libblkid x86_64 2.31-2.fc28 fedora 202 k libcap x86_64 2.25-7.fc27 fedora 54 k libcap-ng x86_64 0.7.8-7.fc28 fedora 31 k libcom_err x86_64 1.43.7-1.fc28 fedora 46 k libcomps x86_64 0.1.8-9.fc28 fedora 78 k libcrypt-nss x86_64 2.26.9000-27.fc28 fedora 45 k libcurl x86_64 7.56.1-1.fc28 fedora 281 k libdb x86_64 5.3.28-29.fc28 fedora 753 k libdb-utils x86_64 5.3.28-29.fc28 fedora 145 k libdnf x86_64 0.11.1-3.fc28 fedora 132 k libfdisk x86_64 2.31-2.fc28 fedora 252 k libffi x86_64 3.1-14.fc27 fedora 34 k libgcc x86_64 7.2.1-1.fc28 fedora 89 k libgcrypt x86_64 1.8.1-1.fc28 fedora 453 k libgpg-error x86_64 1.27-3.fc27 fedora 183 k libidn x86_64 1.33-4.fc27 fedora 234 k libidn2 x86_64 2.0.4-1.fc28 fedora 98 k libksba x86_64 1.3.5-5.fc27 fedora 132 k libmetalink x86_64 0.1.3-4.fc27 fedora 30 k libmount x86_64 2.31-2.fc28 fedora 223 k libnghttp2 x86_64 1.27.0-1.fc28 fedora 73 k libpcap x86_64 14:1.8.1-6.fc27 fedora 150 k libpsl x86_64 0.19.1-1.fc28 fedora 50 k libpwquality x86_64 1.4.0-3.fc27 fedora 100 k librepo x86_64 1.8.1-4.fc28 fedora 80 k libreport-filesystem x86_64 2.9.3-1.fc28 fedora 16 k libseccomp x86_64 2.3.2-5.fc27 fedora 61 k libselinux x86_64 2.7-5.fc28 fedora 174 k libsemanage x86_64 2.7-4.fc28 fedora 157 k libsepol x86_64 2.7-2.fc28 fedora 332 k libsigsegv x86_64 2.11-3.fc27 fedora 28 k libsmartcols x86_64 2.31-2.fc28 fedora 165 k libsolv x86_64 0.6.30-3.git.2887.97b8c0c.fc28 fedora 373 k libssh2 x86_64 1.8.0-5.fc28 fedora 96 k libstdc++ x86_64 7.2.1-1.fc28 fedora 461 k libtasn1 x86_64 4.12-3.fc27 fedora 74 k libtool-ltdl x86_64 2.4.6-20.fc27 fedora 55 k libunistring x86_64 0.9.7-3.fc27 fedora 408 k libusbx x86_64 1.0.21-4.fc27 fedora 68 k libutempter x86_64 1.1.6-11.fc27 fedora 30 k libuuid x86_64 2.31-2.fc28 fedora 88 k libverto x86_64 0.3.0-1.fc28 fedora 22 k libxml2 x86_64 2.9.5-2.fc28 fedora 691 k libzstd x86_64 1.3.2-1.fc28 fedora 193 k lua-libs x86_64 5.3.4-6.fc28 fedora 115 k lz4-libs x86_64 1.8.0-1.fc28 fedora 49 k make x86_64 1:4.2.1-4.fc27 fedora 494 k mpfr x86_64 3.1.5-5.fc27 fedora 216 k ncurses x86_64 6.0-14.20170916.fc28 fedora 376 k ncurses-base noarch 6.0-14.20170916.fc28 fedora 78 k ncurses-libs x86_64 6.0-14.20170916.fc28 fedora 328 k nettle x86_64 3.4-1.fc28 fedora 292 k npth x86_64 1.5-3.fc27 fedora 24 k nspr x86_64 4.17.0-1.fc28 fedora 138 k nss x86_64 3.34.0-2.fc28 fedora 668 k nss-pem x86_64 1.0.3-6.fc28 fedora 77 k nss-softokn x86_64 3.34.0-2.fc28 fedora 391 k nss-softokn-freebl x86_64 3.34.0-2.fc28 fedora 235 k nss-sysinit x86_64 3.34.0-2.fc28 fedora 63 k nss-util x86_64 3.34.0-2.fc28 fedora 89 k openldap x86_64 2.4.45-4.fc28 fedora 356 k openssl-libs x86_64 1:1.1.0g-1.fc28 fedora 1.3 M p11-kit x86_64 0.23.9-2.fc28 fedora 264 k p11-kit-trust x86_64 0.23.9-2.fc28 fedora 134 k pam x86_64 1.3.0-6.fc28 fedora 749 k pcre x86_64 8.41-3.fc28 fedora 204 k pcre2 x86_64 10.30-3.fc28 fedora 233 k popt x86_64 1.16-12.fc28 fedora 59 k publicsuffix-list-dafsa noarch 20171028-1.fc28 fedora 46 k python3 x86_64 3.6.3-3.fc28 fedora 68 k python3-dnf noarch 2.7.5-3.fc28 fedora 454 k python3-dnf-plugins-core noarch 2.1.5-1.fc28 fedora 141 k python3-gpg x86_64 1.9.0-8.fc28 fedora 225 k python3-hawkey x86_64 0.11.1-3.fc28 fedora 57 k python3-iniparse noarch 0.4-28.fc28 fedora 47 k python3-libcomps x86_64 0.1.8-9.fc28 fedora 50 k python3-librepo x86_64 1.8.1-4.fc28 fedora 47 k python3-libs x86_64 3.6.3-3.fc28 fedora 8.6 M python3-pip noarch 9.0.1-11.fc27 fedora 1.7 M python3-rpm x86_64 4.14.0-5.fc28 fedora 117 k python3-setuptools noarch 36.2.0-8.fc28 fedora 597 k python3-six noarch 1.11.0-2.fc28 fedora 37 k qrencode-libs x86_64 3.4.4-3.fc27 fedora 57 k readline x86_64 7.0-7.fc27 fedora 217 k rpm x86_64 4.14.0-5.fc28 fedora 530 k rpm-build-libs x86_64 4.14.0-5.fc28 fedora 144 k rpm-libs x86_64 4.14.0-5.fc28 fedora 324 k rpm-plugin-selinux x86_64 4.14.0-5.fc28 fedora 66 k sed x86_64 4.4-3.fc27 fedora 288 k setup noarch 2.11.1-1.fc28 fedora 176 k shadow-utils x86_64 2:4.5-7.fc28 fedora 1.2 M sqlite-libs x86_64 3.20.1-1.fc28 fedora 537 k systemd x86_64 235-4.fc28 fedora 3.5 M systemd-libs x86_64 235-4.fc28 fedora 442 k systemd-pam x86_64 235-4.fc28 fedora 166 k tzdata noarch 2017c-1.fc28 fedora 444 k util-linux x86_64 2.31-2.fc28 fedora 2.4 M xz-libs x86_64 5.2.3-5.fc28 fedora 91 k zlib x86_64 1.2.11-4.fc27 fedora 99 k Transaction Summary ================================================================================ Install 161 Packages Total download size: 74 M Installed size: 330 M Downloading Packages: (1/161): dnf-plugins-core-2.1.5-1.fc28.noarch.r 746 kB/s | 51 kB 00:00 (2/161): distribution-gpg-keys-1.16-1.fc28.noar 2.3 MB/s | 165 kB 00:00 (3/161): dnf-2.7.5-3.fc28.noarch.rpm 3.6 MB/s | 350 kB 00:00 (4/161): python3-dnf-2.7.5-3.fc28.noarch.rpm 11 MB/s | 454 kB 00:00 (5/161): python3-dnf-plugins-core-2.1.5-1.fc28. 3.9 MB/s | 141 kB 00:00 (6/161): filesystem-3.6-1.fc28.x86_64.rpm 12 MB/s | 1.1 MB 00:00 (7/161): bash-4.4.12-13.fc28.x86_64.rpm 10 MB/s | 1.5 MB 00:00 (8/161): ncurses-libs-6.0-14.20170916.fc28.x86_ 13 MB/s | 328 kB 00:00 (9/161): deltarpm-3.6-24.fc27.x86_64.rpm 4.3 MB/s | 90 kB 00:00 (10/161): dnf-conf-2.7.5-3.fc28.noarch.rpm 2.5 MB/s | 69 kB 00:00 (11/161): glibc-2.26.9000-27.fc28.x86_64.rpm 24 MB/s | 3.4 MB 00:00 (12/161): python3-hawkey-0.11.1-3.fc28.x86_64.r 2.6 MB/s | 57 kB 00:00 (13/161): python3-gpg-1.9.0-8.fc28.x86_64.rpm 5.0 MB/s | 225 kB 00:00 (14/161): python3-iniparse-0.4-28.fc28.noarch.r 2.8 MB/s | 47 kB 00:00 (15/161): python3-libcomps-0.1.8-9.fc28.x86_64. 3.0 MB/s | 50 kB 00:00 (16/161): python3-rpm-4.14.0-5.fc28.x86_64.rpm 12 MB/s | 117 kB 00:00 (17/161): python3-librepo-1.8.1-4.fc28.x86_64.r 3.4 MB/s | 47 kB 00:00 (18/161): setup-2.11.1-1.fc28.noarch.rpm 12 MB/s | 176 kB 00:00 (19/161): basesystem-11-4.fc27.noarch.rpm 1.4 MB/s | 8.9 kB 00:00 (20/161): ncurses-base-6.0-14.20170916.fc28.noa 15 MB/s | 78 kB 00:00 (21/161): bzip2-libs-1.0.6-24.fc27.x86_64.rpm 7.8 MB/s | 46 kB 00:00 (22/161): xz-libs-5.2.3-5.fc28.x86_64.rpm 5.1 MB/s | 91 kB 00:00 (23/161): rpm-libs-4.14.0-5.fc28.x86_64.rpm 13 MB/s | 324 kB 00:00 (24/161): glibc-common-2.26.9000-27.fc28.x86_64 20 MB/s | 789 kB 00:00 (25/161): libreport-filesystem-2.9.3-1.fc28.x86 537 kB/s | 16 kB 00:00 (26/161): zlib-1.2.11-4.fc27.x86_64.rpm 2.4 MB/s | 99 kB 00:00 (27/161): gpgme-1.9.0-8.fc28.x86_64.rpm 5.5 MB/s | 231 kB 00:00 (28/161): libdnf-0.11.1-3.fc28.x86_64.rpm 6.7 MB/s | 132 kB 00:00 (29/161): libgcc-7.2.1-1.fc28.x86_64.rpm 5.3 MB/s | 89 kB 00:00 (30/161): libsolv-0.6.30-3.git.2887.97b8c0c.fc2 10 MB/s | 373 kB 00:00 (31/161): python3-six-1.11.0-2.fc28.noarch.rpm 1.4 MB/s | 37 kB 00:00 (32/161): glib2-2.54.2-1.fc28.x86_64.rpm 20 MB/s | 2.4 MB 00:00 (33/161): expat-2.2.5-1.fc28.x86_64.rpm 6.8 MB/s | 103 kB 00:00 (34/161): libcomps-0.1.8-9.fc28.x86_64.rpm 7.4 MB/s | 78 kB 00:00 (35/161): libgpg-error-1.27-3.fc27.x86_64.rpm 12 MB/s | 183 kB 00:00 (36/161): libxml2-2.9.5-2.fc28.x86_64.rpm 14 MB/s | 691 kB 00:00 (37/161): librepo-1.8.1-4.fc28.x86_64.rpm 2.5 MB/s | 80 kB 00:00 (38/161): rpm-build-libs-4.14.0-5.fc28.x86_64.r 3.1 MB/s | 144 kB 00:00 (39/161): python3-libs-3.6.3-3.fc28.x86_64.rpm 31 MB/s | 8.6 MB 00:00 (40/161): libselinux-2.7-5.fc28.x86_64.rpm 3.8 MB/s | 174 kB 00:00 (41/161): openssl-libs-1.1.0g-1.fc28.x86_64.rpm 11 MB/s | 1.3 MB 00:00 (42/161): tzdata-2017c-1.fc28.noarch.rpm 16 MB/s | 444 kB 00:00 (43/161): elfutils-libelf-0.170-1.fc27.x86_64.r 7.7 MB/s | 204 kB 00:00 (44/161): libacl-2.2.52-18.fc27.x86_64.rpm 2.2 MB/s | 33 kB 00:00 (45/161): libcap-2.25-7.fc27.x86_64.rpm 7.1 MB/s | 54 kB 00:00 (46/161): libzstd-1.3.2-1.fc28.x86_64.rpm 20 MB/s | 193 kB 00:00 (47/161): lua-libs-5.3.4-6.fc28.x86_64.rpm 8.2 MB/s | 115 kB 00:00 (48/161): libdb-5.3.28-29.fc28.x86_64.rpm 28 MB/s | 753 kB 00:00 (49/161): popt-1.16-12.fc28.x86_64.rpm 5.0 MB/s | 59 kB 00:00 (50/161): rpm-4.14.0-5.fc28.x86_64.rpm 38 MB/s | 530 kB 00:00 (51/161): rpm-plugin-selinux-4.14.0-5.fc28.x86_ 5.8 MB/s | 66 kB 00:00 (52/161): libassuan-2.4.3-6.fc27.x86_64.rpm 5.9 MB/s | 76 kB 00:00 (53/161): gdbm-1.13-3.fc27.x86_64.rpm 9.6 MB/s | 157 kB 00:00 (54/161): libffi-3.1-14.fc27.x86_64.rpm 4.4 MB/s | 34 kB 00:00 (55/161): readline-7.0-7.fc27.x86_64.rpm 18 MB/s | 217 kB 00:00 (56/161): sqlite-libs-3.20.1-1.fc28.x86_64.rpm 24 MB/s | 537 kB 00:00 (57/161): pcre-8.41-3.fc28.x86_64.rpm 11 MB/s | 204 kB 00:00 (58/161): libmount-2.31-2.fc28.x86_64.rpm 6.2 MB/s | 223 kB 00:00 (59/161): gnupg2-2.2.2-2.fc28.x86_64.rpm 27 MB/s | 2.3 MB 00:00 (60/161): crypto-policies-20171115-1.git921600e 1.9 MB/s | 37 kB 00:00 (61/161): elfutils-libs-0.170-1.fc27.x86_64.rpm 18 MB/s | 283 kB 00:00 (62/161): ca-certificates-2017.2.16-4.fc27.noar 13 MB/s | 452 kB 00:00 (63/161): file-libs-5.32-1.fc28.x86_64.rpm 25 MB/s | 514 kB 00:00 (64/161): ima-evm-utils-1.0-2.fc28.x86_64.rpm 3.4 MB/s | 49 kB 00:00 (65/161): libsepol-2.7-2.fc28.x86_64.rpm 23 MB/s | 332 kB 00:00 (66/161): libattr-2.4.47-21.fc27.x86_64.rpm 4.2 MB/s | 25 kB 00:00 (67/161): pcre2-10.30-3.fc28.x86_64.rpm 21 MB/s | 233 kB 00:00 (68/161): libarchive-3.3.1-3.fc27.x86_64.rpm 34 MB/s | 355 kB 00:00 (69/161): libdb-utils-5.3.28-29.fc28.x86_64.rpm 9.3 MB/s | 145 kB 00:00 (70/161): info-6.5-1.fc28.x86_64.rpm 13 MB/s | 193 kB 00:00 (71/161): libksba-1.3.5-5.fc27.x86_64.rpm 13 MB/s | 132 kB 00:00 (72/161): gnutls-3.6.1-2.fc28.x86_64.rpm 21 MB/s | 728 kB 00:00 (73/161): libgcrypt-1.8.1-1.fc28.x86_64.rpm 14 MB/s | 453 kB 00:00 (74/161): npth-1.5-3.fc27.x86_64.rpm 2.4 MB/s | 24 kB 00:00 (75/161): libusbx-1.0.21-4.fc27.x86_64.rpm 3.6 MB/s | 68 kB 00:00 (76/161): libblkid-2.31-2.fc28.x86_64.rpm 24 MB/s | 202 kB 00:00 (77/161): libuuid-2.31-2.fc28.x86_64.rpm 14 MB/s | 88 kB 00:00 (78/161): openldap-2.4.45-4.fc28.x86_64.rpm 21 MB/s | 356 kB 00:00 (79/161): grep-3.1-3.fc27.x86_64.rpm 18 MB/s | 270 kB 00:00 (80/161): sed-4.4-3.fc27.x86_64.rpm 13 MB/s | 288 kB 00:00 (81/161): elfutils-default-yama-scope-0.170-1.f 2.0 MB/s | 39 kB 00:00 (82/161): lz4-libs-1.8.0-1.fc28.x86_64.rpm 5.9 MB/s | 49 kB 00:00 (83/161): keyutils-libs-1.5.10-3.fc27.x86_64.rp 2.7 MB/s | 32 kB 00:00 (84/161): compat-openssl10-1.0.2m-1.fc28.x86_64 34 MB/s | 1.1 MB 00:00 (85/161): libidn2-2.0.4-1.fc28.x86_64.rpm 7.1 MB/s | 98 kB 00:00 (86/161): gmp-6.1.2-6.fc27.x86_64.rpm 9.5 MB/s | 280 kB 00:00 (87/161): libtasn1-4.12-3.fc27.x86_64.rpm 4.1 MB/s | 74 kB 00:00 (88/161): libunistring-0.9.7-3.fc27.x86_64.rpm 19 MB/s | 408 kB 00:00 (89/161): p11-kit-0.23.9-2.fc28.x86_64.rpm 26 MB/s | 264 kB 00:00 (90/161): nettle-3.4-1.fc28.x86_64.rpm 15 MB/s | 292 kB 00:00 (91/161): cyrus-sasl-lib-2.1.26-35.fc28.x86_64. 16 MB/s | 161 kB 00:00 (92/161): systemd-libs-235-4.fc28.x86_64.rpm 24 MB/s | 442 kB 00:00 (93/161): nspr-4.17.0-1.fc28.x86_64.rpm 9.0 MB/s | 138 kB 00:00 (94/161): nss-util-3.34.0-2.fc28.x86_64.rpm 7.5 MB/s | 89 kB 00:00 (95/161): nss-3.34.0-2.fc28.x86_64.rpm 28 MB/s | 668 kB 00:00 (96/161): libcom_err-1.43.7-1.fc28.x86_64.rpm 4.0 MB/s | 46 kB 00:00 (97/161): make-4.2.1-4.fc27.x86_64.rpm 18 MB/s | 494 kB 00:00 (98/161): krb5-libs-1.16-0.beta1.4.fc28.x86_64. 25 MB/s | 812 kB 00:00 (99/161): nss-pem-1.0.3-6.fc28.x86_64.rpm 6.0 MB/s | 77 kB 00:00 (100/161): nss-sysinit-3.34.0-2.fc28.x86_64.rpm 11 MB/s | 63 kB 00:00 (101/161): gc-7.6.0-7.fc27.x86_64.rpm 16 MB/s | 110 kB 00:00 (102/161): nss-softokn-3.34.0-2.fc28.x86_64.rpm 21 MB/s | 391 kB 00:00 (103/161): libverto-0.3.0-1.fc28.x86_64.rpm 974 kB/s | 22 kB 00:00 (104/161): gawk-4.2.0-1.fc28.x86_64.rpm 21 MB/s | 1.1 MB 00:00 (105/161): nss-softokn-freebl-3.34.0-2.fc28.x86 7.7 MB/s | 235 kB 00:00 (106/161): libatomic_ops-7.4.6-3.fc27.x86_64.rp 3.2 MB/s | 33 kB 00:00 (107/161): libtool-ltdl-2.4.6-20.fc27.x86_64.rp 3.8 MB/s | 55 kB 00:00 (108/161): libstdc++-7.2.1-1.fc28.x86_64.rpm 12 MB/s | 461 kB 00:00 (109/161): libsigsegv-2.11-3.fc27.x86_64.rpm 1.9 MB/s | 28 kB 00:00 (110/161): python3-3.6.3-3.fc28.x86_64.rpm 4.9 MB/s | 68 kB 00:00 (111/161): mpfr-3.1.5-5.fc27.x86_64.rpm 11 MB/s | 216 kB 00:00 (112/161): guile-2.0.14-4.fc28.x86_64.rpm 26 MB/s | 3.5 MB 00:00 (113/161): p11-kit-trust-0.23.9-2.fc28.x86_64.r 8.7 MB/s | 134 kB 00:00 (114/161): python3-pip-9.0.1-11.fc27.noarch.rpm 32 MB/s | 1.7 MB 00:00 (115/161): python3-setuptools-36.2.0-8.fc28.noa 11 MB/s | 597 kB 00:00 (116/161): chkconfig-1.10-3.fc27.x86_64.rpm 8.6 MB/s | 186 kB 00:00 (117/161): acl-2.2.52-18.fc27.x86_64.rpm 7.5 MB/s | 78 kB 00:00 (118/161): audit-libs-2.8.1-1.fc28.x86_64.rpm 10 MB/s | 111 kB 00:00 (119/161): systemd-235-4.fc28.x86_64.rpm 47 MB/s | 3.5 MB 00:00 (120/161): cryptsetup-libs-2.0.0-0.5.fc28.x86_6 4.4 MB/s | 285 kB 00:00 (121/161): iptables-libs-1.6.1-5.fc28.x86_64.rp 1.4 MB/s | 90 kB 00:00 (122/161): kmod-libs-24-3.fc27.x86_64.rpm 6.7 MB/s | 62 kB 00:00 (123/161): libseccomp-2.3.2-5.fc27.x86_64.rpm 7.5 MB/s | 61 kB 00:00 (124/161): libidn-1.33-4.fc27.x86_64.rpm 19 MB/s | 234 kB 00:00 (125/161): qrencode-libs-3.4.4-3.fc27.x86_64.rp 5.0 MB/s | 57 kB 00:00 (126/161): pam-1.3.0-6.fc28.x86_64.rpm 38 MB/s | 749 kB 00:00 (127/161): systemd-pam-235-4.fc28.x86_64.rpm 12 MB/s | 166 kB 00:00 (128/161): libcap-ng-0.7.8-7.fc28.x86_64.rpm 2.3 MB/s | 31 kB 00:00 (129/161): shadow-utils-4.5-7.fc28.x86_64.rpm 31 MB/s | 1.2 MB 00:00 (130/161): json-c-0.12.1-4.fc27.x86_64.rpm 2.6 MB/s | 30 kB 00:00 (131/161): libargon2-20161029-2.fc28.x86_64.rpm 4.3 MB/s | 27 kB 00:00 (132/161): device-mapper-libs-1.02.145-1.fc28.x 16 MB/s | 392 kB 00:00 (133/161): libpcap-1.8.1-6.fc27.x86_64.rpm 4.5 MB/s | 150 kB 00:00 (134/161): emacs-filesystem-25.3-3.fc28.noarch. 2.2 MB/s | 67 kB 00:00 (135/161): cracklib-2.9.6-9.fc28.x86_64.rpm 3.1 MB/s | 87 kB 00:00 (136/161): libsemanage-2.7-4.fc28.x86_64.rpm 11 MB/s | 157 kB 00:00 (137/161): device-mapper-1.02.145-1.fc28.x86_64 19 MB/s | 359 kB 00:00 (138/161): gzip-1.8-4.fc27.x86_64.rpm 7.0 MB/s | 160 kB 00:00 (139/161): libfdisk-2.31-2.fc28.x86_64.rpm 18 MB/s | 252 kB 00:00 (140/161): libsmartcols-2.31-2.fc28.x86_64.rpm 7.5 MB/s | 165 kB 00:00 (141/161): libutempter-1.1.6-11.fc27.x86_64.rpm 2.0 MB/s | 30 kB 00:00 (142/161): util-linux-2.31-2.fc28.x86_64.rpm 37 MB/s | 2.4 MB 00:00 (143/161): dbus-libs-1.12.0-1.fc28.x86_64.rpm 5.4 MB/s | 178 kB 00:00 (144/161): dbus-1.12.0-1.fc28.x86_64.rpm 6.7 MB/s | 266 kB 00:00 (145/161): fedora-release-28-0.1.noarch.rpm 4.7 MB/s | 25 kB 00:00 (146/161): libpwquality-1.4.0-3.fc27.x86_64.rpm 3.7 MB/s | 100 kB 00:00 (147/161): fedora-repos-28-0.3.noarch.rpm 398 kB/s | 8.1 kB 00:00 (148/161): fedora-gpg-keys-28-0.3.noarch.rpm 3.9 MB/s | 93 kB 00:00 (149/161): fedora-repos-rawhide-28-0.3.noarch.r 1.3 MB/s | 7.7 kB 00:00 (150/161): ncurses-6.0-14.20170916.fc28.x86_64. 18 MB/s | 376 kB 00:00 (151/161): coreutils-common-8.28-2.fc28.x86_64. 38 MB/s | 1.9 MB 00:00 (152/161): curl-7.56.1-1.fc28.x86_64.rpm 10 MB/s | 335 kB 00:00 (153/161): libmetalink-0.1.3-4.fc27.x86_64.rpm 5.4 MB/s | 30 kB 00:00 (154/161): coreutils-8.28-2.fc28.x86_64.rpm 16 MB/s | 1.2 MB 00:00 (155/161): libcrypt-nss-2.26.9000-27.fc28.x86_6 3.2 MB/s | 45 kB 00:00 (156/161): libcurl-7.56.1-1.fc28.x86_64.rpm 16 MB/s | 281 kB 00:00 (157/161): libpsl-0.19.1-1.fc28.x86_64.rpm 7.3 MB/s | 50 kB 00:00 (158/161): libnghttp2-1.27.0-1.fc28.x86_64.rpm 7.2 MB/s | 73 kB 00:00 (159/161): libssh2-1.8.0-5.fc28.x86_64.rpm 13 MB/s | 96 kB 00:00 (160/161): publicsuffix-list-dafsa-20171028-1.f 6.5 MB/s | 46 kB 00:00 (161/161): glibc-all-langpacks-2.26.9000-27.fc2 42 MB/s | 7.7 MB 00:00 -------------------------------------------------------------------------------- Total 33 MB/s | 74 MB 00:02 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Running scriptlet: filesystem-3.6-1.fc28.x86_64 1/1 Preparing : 1/1 Installing : libgcc-7.2.1-1.fc28.x86_64 1/161 Running scriptlet: libgcc-7.2.1-1.fc28.x86_64 1/161 Installing : publicsuffix-list-dafsa-20171028-1.fc28.noarch 2/161 Installing : fedora-gpg-keys-28-0.3.noarch 3/161 Installing : fedora-repos-rawhide-28-0.3.noarch 4/161 Installing : fedora-repos-28-0.3.noarch 5/161 Installing : fedora-release-28-0.1.noarch 6/161 Running scriptlet: fedora-release-28-0.1.noarch 6/161 Installing : setup-2.11.1-1.fc28.noarch 7/161 Running scriptlet: setup-2.11.1-1.fc28.noarch 7/161 warning: /etc/hosts created as /etc/hosts.rpmnew Installing : filesystem-3.6-1.fc28.x86_64 8/161 Installing : basesystem-11-4.fc27.noarch 9/161 Installing : emacs-filesystem-1:25.3-3.fc28.noarch 10/161 Installing : tzdata-2017c-1.fc28.noarch 11/161 Installing : libreport-filesystem-2.9.3-1.fc28.x86_64 12/161 Installing : dnf-conf-2.7.5-3.fc28.noarch 13/161 warning: /etc/dnf/dnf.conf created as /etc/dnf/dnf.conf.rpmnew Installing : ncurses-base-6.0-14.20170916.fc28.noarch 14/161 Installing : glibc-all-langpacks-2.26.9000-27.fc28.x86_64 15/161 Installing : glibc-common-2.26.9000-27.fc28.x86_64 16/161 Running scriptlet: glibc-2.26.9000-27.fc28.x86_64 17/161 Installing : glibc-2.26.9000-27.fc28.x86_64 17/161 Running scriptlet: glibc-2.26.9000-27.fc28.x86_64 17/161 Installing : ncurses-libs-6.0-14.20170916.fc28.x86_64 18/161 Running scriptlet: ncurses-libs-6.0-14.20170916.fc28.x86_64 18/161 Installing : bash-4.4.12-13.fc28.x86_64 19/161 Running scriptlet: bash-4.4.12-13.fc28.x86_64 19/161 Installing : libsepol-2.7-2.fc28.x86_64 20/161 Running scriptlet: libsepol-2.7-2.fc28.x86_64 20/161 Installing : pcre2-10.30-3.fc28.x86_64 21/161 Running scriptlet: pcre2-10.30-3.fc28.x86_64 21/161 Installing : libselinux-2.7-5.fc28.x86_64 22/161 Running scriptlet: libselinux-2.7-5.fc28.x86_64 22/161 Installing : zlib-1.2.11-4.fc27.x86_64 23/161 Running scriptlet: zlib-1.2.11-4.fc27.x86_64 23/161 Installing : info-6.5-1.fc28.x86_64 24/161 Running scriptlet: info-6.5-1.fc28.x86_64 24/161 Installing : xz-libs-5.2.3-5.fc28.x86_64 25/161 Running scriptlet: xz-libs-5.2.3-5.fc28.x86_64 25/161 Installing : bzip2-libs-1.0.6-24.fc27.x86_64 26/161 Running scriptlet: bzip2-libs-1.0.6-24.fc27.x86_64 26/161 Installing : libgpg-error-1.27-3.fc27.x86_64 27/161 Running scriptlet: libgpg-error-1.27-3.fc27.x86_64 27/161 Installing : libdb-5.3.28-29.fc28.x86_64 28/161 Running scriptlet: libdb-5.3.28-29.fc28.x86_64 28/161 Installing : expat-2.2.5-1.fc28.x86_64 29/161 Running scriptlet: expat-2.2.5-1.fc28.x86_64 29/161 Installing : nspr-4.17.0-1.fc28.x86_64 30/161 Running scriptlet: nspr-4.17.0-1.fc28.x86_64 30/161 Installing : nss-util-3.34.0-2.fc28.x86_64 31/161 Running scriptlet: nss-util-3.34.0-2.fc28.x86_64 31/161 Installing : elfutils-libelf-0.170-1.fc27.x86_64 32/161 Running scriptlet: elfutils-libelf-0.170-1.fc27.x86_64 32/161 Installing : libcap-2.25-7.fc27.x86_64 33/161 Running scriptlet: libcap-2.25-7.fc27.x86_64 33/161 Installing : gmp-1:6.1.2-6.fc27.x86_64 34/161 Running scriptlet: gmp-1:6.1.2-6.fc27.x86_64 34/161 Installing : readline-7.0-7.fc27.x86_64 35/161 Running scriptlet: readline-7.0-7.fc27.x86_64 35/161 Installing : popt-1.16-12.fc28.x86_64 36/161 Running scriptlet: popt-1.16-12.fc28.x86_64 36/161 Installing : libffi-3.1-14.fc27.x86_64 37/161 Running scriptlet: libffi-3.1-14.fc27.x86_64 37/161 Installing : libuuid-2.31-2.fc28.x86_64 38/161 Running scriptlet: libuuid-2.31-2.fc28.x86_64 38/161 Installing : libgcrypt-1.8.1-1.fc28.x86_64 39/161 Running scriptlet: libgcrypt-1.8.1-1.fc28.x86_64 39/161 Installing : libxml2-2.9.5-2.fc28.x86_64 40/161 Running scriptlet: libxml2-2.9.5-2.fc28.x86_64 40/161 Installing : libunistring-0.9.7-3.fc27.x86_64 41/161 Running scriptlet: libunistring-0.9.7-3.fc27.x86_64 41/161 Installing : libzstd-1.3.2-1.fc28.x86_64 42/161 Running scriptlet: libzstd-1.3.2-1.fc28.x86_64 42/161 Installing : lua-libs-5.3.4-6.fc28.x86_64 43/161 Installing : libattr-2.4.47-21.fc27.x86_64 44/161 Running scriptlet: libattr-2.4.47-21.fc27.x86_64 44/161 Installing : libacl-2.2.52-18.fc27.x86_64 45/161 Running scriptlet: libacl-2.2.52-18.fc27.x86_64 45/161 Installing : sed-4.4-3.fc27.x86_64 46/161 Running scriptlet: sed-4.4-3.fc27.x86_64 46/161 Installing : libidn2-2.0.4-1.fc28.x86_64 47/161 Running scriptlet: libidn2-2.0.4-1.fc28.x86_64 47/161 Installing : p11-kit-0.23.9-2.fc28.x86_64 48/161 Running scriptlet: p11-kit-0.23.9-2.fc28.x86_64 48/161 Installing : sqlite-libs-3.20.1-1.fc28.x86_64 49/161 Running scriptlet: sqlite-libs-3.20.1-1.fc28.x86_64 49/161 Installing : lz4-libs-1.8.0-1.fc28.x86_64 50/161 Running scriptlet: lz4-libs-1.8.0-1.fc28.x86_64 50/161 Installing : libcom_err-1.43.7-1.fc28.x86_64 51/161 Running scriptlet: libcom_err-1.43.7-1.fc28.x86_64 51/161 Installing : libcap-ng-0.7.8-7.fc28.x86_64 52/161 Running scriptlet: libcap-ng-0.7.8-7.fc28.x86_64 52/161 Installing : audit-libs-2.8.1-1.fc28.x86_64 53/161 Running scriptlet: audit-libs-2.8.1-1.fc28.x86_64 53/161 Installing : nss-softokn-freebl-3.34.0-2.fc28.x86_64 54/161 Installing : libcrypt-nss-2.26.9000-27.fc28.x86_64 55/161 Running scriptlet: libcrypt-nss-2.26.9000-27.fc28.x86_64 55/161 Installing : libassuan-2.4.3-6.fc27.x86_64 56/161 Running scriptlet: libassuan-2.4.3-6.fc27.x86_64 56/161 Installing : pcre-8.41-3.fc28.x86_64 57/161 Running scriptlet: pcre-8.41-3.fc28.x86_64 57/161 Installing : grep-3.1-3.fc27.x86_64 58/161 Running scriptlet: grep-3.1-3.fc27.x86_64 58/161 Installing : systemd-libs-235-4.fc28.x86_64 59/161 Running scriptlet: systemd-libs-235-4.fc28.x86_64 59/161 Installing : keyutils-libs-1.5.10-3.fc27.x86_64 60/161 Running scriptlet: keyutils-libs-1.5.10-3.fc27.x86_64 60/161 Installing : libtasn1-4.12-3.fc27.x86_64 61/161 Running scriptlet: libtasn1-4.12-3.fc27.x86_64 61/161 Installing : libusbx-1.0.21-4.fc27.x86_64 62/161 Running scriptlet: libusbx-1.0.21-4.fc27.x86_64 62/161 Installing : dbus-libs-1:1.12.0-1.fc28.x86_64 63/161 Running scriptlet: dbus-libs-1:1.12.0-1.fc28.x86_64 63/161 Installing : nss-softokn-3.34.0-2.fc28.x86_64 64/161 Running scriptlet: nss-softokn-3.34.0-2.fc28.x86_64 64/161 Installing : libsemanage-2.7-4.fc28.x86_64 65/161 Running scriptlet: libsemanage-2.7-4.fc28.x86_64 65/161 Installing : libpsl-0.19.1-1.fc28.x86_64 66/161 Running scriptlet: libpsl-0.19.1-1.fc28.x86_64 66/161 Installing : acl-2.2.52-18.fc27.x86_64 67/161 Installing : libcomps-0.1.8-9.fc28.x86_64 68/161 Running scriptlet: libcomps-0.1.8-9.fc28.x86_64 68/161 Installing : chkconfig-1.10-3.fc27.x86_64 69/161 Installing : p11-kit-trust-0.23.9-2.fc28.x86_64 70/161 Running scriptlet: p11-kit-trust-0.23.9-2.fc28.x86_64 70/161 Running scriptlet: ca-certificates-2017.2.16-4.fc27.noarch 71/161 Installing : ca-certificates-2017.2.16-4.fc27.noarch 71/161 Running scriptlet: ca-certificates-2017.2.16-4.fc27.noarch 71/161 Installing : gdbm-1.13-3.fc27.x86_64 72/161 Running scriptlet: gdbm-1.13-3.fc27.x86_64 72/161 Installing : nettle-3.4-1.fc28.x86_64 73/161 Running scriptlet: nettle-3.4-1.fc28.x86_64 73/161 Installing : mpfr-3.1.5-5.fc27.x86_64 74/161 Running scriptlet: mpfr-3.1.5-5.fc27.x86_64 74/161 Installing : libmetalink-0.1.3-4.fc27.x86_64 75/161 Running scriptlet: libmetalink-0.1.3-4.fc27.x86_64 75/161 Installing : libdb-utils-5.3.28-29.fc28.x86_64 76/161 Installing : libksba-1.3.5-5.fc27.x86_64 77/161 Running scriptlet: libksba-1.3.5-5.fc27.x86_64 77/161 Installing : kmod-libs-24-3.fc27.x86_64 78/161 Running scriptlet: kmod-libs-24-3.fc27.x86_64 78/161 Installing : libidn-1.33-4.fc27.x86_64 79/161 Running scriptlet: libidn-1.33-4.fc27.x86_64 79/161 Installing : coreutils-common-8.28-2.fc28.x86_64 80/161 Running scriptlet: coreutils-common-8.28-2.fc28.x86_64 80/161 Installing : file-libs-5.32-1.fc28.x86_64 81/161 Running scriptlet: file-libs-5.32-1.fc28.x86_64 81/161 Installing : elfutils-default-yama-scope-0.170-1.fc27.noarch 82/161 Running scriptlet: elfutils-default-yama-scope-0.170-1.fc27.noarch 82/161 Installing : elfutils-libs-0.170-1.fc27.x86_64 83/161 Running scriptlet: elfutils-libs-0.170-1.fc27.x86_64 83/161 Installing : ncurses-6.0-14.20170916.fc28.x86_64 84/161 Installing : openssl-libs-1:1.1.0g-1.fc28.x86_64 85/161 Running scriptlet: openssl-libs-1:1.1.0g-1.fc28.x86_64 85/161 Installing : coreutils-8.28-2.fc28.x86_64 86/161 Installing : crypto-policies-20171115-1.git921600e.fc28.noarc 87/161 Running scriptlet: crypto-policies-20171115-1.git921600e.fc28.noarc 87/161 Installing : python3-pip-9.0.1-11.fc27.noarch 88/161 Installing : python3-setuptools-36.2.0-8.fc28.noarch 89/161 Installing : python3-3.6.3-3.fc28.x86_64 90/161 Running scriptlet: python3-3.6.3-3.fc28.x86_64 90/161 Installing : python3-libs-3.6.3-3.fc28.x86_64 91/161 Running scriptlet: python3-libs-3.6.3-3.fc28.x86_64 91/161 Installing : libblkid-2.31-2.fc28.x86_64 92/161 Running scriptlet: libblkid-2.31-2.fc28.x86_64 92/161 Installing : libmount-2.31-2.fc28.x86_64 93/161 Running scriptlet: libmount-2.31-2.fc28.x86_64 93/161 Installing : glib2-2.54.2-1.fc28.x86_64 94/161 Running scriptlet: glib2-2.54.2-1.fc28.x86_64 94/161 Installing : shadow-utils-2:4.5-7.fc28.x86_64 95/161 Running scriptlet: libutempter-1.1.6-11.fc27.x86_64 96/161 Installing : libutempter-1.1.6-11.fc27.x86_64 96/161 Running scriptlet: libutempter-1.1.6-11.fc27.x86_64 96/161 Installing : libfdisk-2.31-2.fc28.x86_64 97/161 Running scriptlet: libfdisk-2.31-2.fc28.x86_64 97/161 Installing : python3-libcomps-0.1.8-9.fc28.x86_64 98/161 Installing : python3-six-1.11.0-2.fc28.noarch 99/161 Installing : python3-iniparse-0.4-28.fc28.noarch 100/161 Installing : gnutls-3.6.1-2.fc28.x86_64 101/161 Running scriptlet: gnutls-3.6.1-2.fc28.x86_64 101/161 Installing : nss-pem-1.0.3-6.fc28.x86_64 102/161 Installing : nss-3.34.0-2.fc28.x86_64 103/161 Running scriptlet: nss-3.34.0-2.fc28.x86_64 103/161 Installing : nss-sysinit-3.34.0-2.fc28.x86_64 104/161 Installing : gzip-1.8-4.fc27.x86_64 105/161 Running scriptlet: gzip-1.8-4.fc27.x86_64 105/161 Installing : cracklib-2.9.6-9.fc28.x86_64 106/161 Running scriptlet: cracklib-2.9.6-9.fc28.x86_64 106/161 Installing : libpwquality-1.4.0-3.fc27.x86_64 107/161 Running scriptlet: libpwquality-1.4.0-3.fc27.x86_64 107/161 Installing : pam-1.3.0-6.fc28.x86_64 108/161 Running scriptlet: pam-1.3.0-6.fc28.x86_64 108/161 Installing : libarchive-3.3.1-3.fc27.x86_64 109/161 Running scriptlet: libarchive-3.3.1-3.fc27.x86_64 109/161 Installing : libssh2-1.8.0-5.fc28.x86_64 110/161 Running scriptlet: libssh2-1.8.0-5.fc28.x86_64 110/161 Installing : npth-1.5-3.fc27.x86_64 111/161 Running scriptlet: npth-1.5-3.fc27.x86_64 111/161 Installing : libverto-0.3.0-1.fc28.x86_64 112/161 Running scriptlet: libverto-0.3.0-1.fc28.x86_64 112/161 Installing : libatomic_ops-7.4.6-3.fc27.x86_64 113/161 Running scriptlet: libatomic_ops-7.4.6-3.fc27.x86_64 113/161 Installing : libstdc++-7.2.1-1.fc28.x86_64 114/161 Running scriptlet: libstdc++-7.2.1-1.fc28.x86_64 114/161 Installing : gc-7.6.0-7.fc27.x86_64 115/161 Running scriptlet: gc-7.6.0-7.fc27.x86_64 115/161 Installing : libtool-ltdl-2.4.6-20.fc27.x86_64 116/161 Running scriptlet: libtool-ltdl-2.4.6-20.fc27.x86_64 116/161 Installing : guile-5:2.0.14-4.fc28.x86_64 117/161 Running scriptlet: guile-5:2.0.14-4.fc28.x86_64 117/161 Installing : make-1:4.2.1-4.fc27.x86_64 118/161 Running scriptlet: make-1:4.2.1-4.fc27.x86_64 118/161 Installing : compat-openssl10-1:1.0.2m-1.fc28.x86_64 119/161 Running scriptlet: compat-openssl10-1:1.0.2m-1.fc28.x86_64 119/161 Installing : ima-evm-utils-1.0-2.fc28.x86_64 120/161 Running scriptlet: ima-evm-utils-1.0-2.fc28.x86_64 120/161 Installing : libsigsegv-2.11-3.fc27.x86_64 121/161 Running scriptlet: libsigsegv-2.11-3.fc27.x86_64 121/161 Installing : gawk-4.2.0-1.fc28.x86_64 122/161 Running scriptlet: gawk-4.2.0-1.fc28.x86_64 122/161 Installing : krb5-libs-1.16-0.beta1.4.fc28.x86_64 123/161 Running scriptlet: krb5-libs-1.16-0.beta1.4.fc28.x86_64 123/161 Installing : cyrus-sasl-lib-2.1.26-35.fc28.x86_64 124/161 Running scriptlet: cyrus-sasl-lib-2.1.26-35.fc28.x86_64 124/161 Installing : openldap-2.4.45-4.fc28.x86_64 125/161 Running scriptlet: openldap-2.4.45-4.fc28.x86_64 125/161 Installing : gnupg2-2.2.2-2.fc28.x86_64 126/161 Running scriptlet: gnupg2-2.2.2-2.fc28.x86_64 126/161 Installing : gpgme-1.9.0-8.fc28.x86_64 127/161 Running scriptlet: gpgme-1.9.0-8.fc28.x86_64 127/161 Installing : python3-gpg-1.9.0-8.fc28.x86_64 128/161 Installing : libseccomp-2.3.2-5.fc27.x86_64 129/161 Running scriptlet: libseccomp-2.3.2-5.fc27.x86_64 129/161 Installing : qrencode-libs-3.4.4-3.fc27.x86_64 130/161 Running scriptlet: qrencode-libs-3.4.4-3.fc27.x86_64 130/161 Installing : json-c-0.12.1-4.fc27.x86_64 131/161 Running scriptlet: json-c-0.12.1-4.fc27.x86_64 131/161 Installing : libargon2-20161029-2.fc28.x86_64 132/161 Running scriptlet: libargon2-20161029-2.fc28.x86_64 132/161 Installing : libpcap-14:1.8.1-6.fc27.x86_64 133/161 Running scriptlet: libpcap-14:1.8.1-6.fc27.x86_64 133/161 Installing : iptables-libs-1.6.1-5.fc28.x86_64 134/161 Installing : libsmartcols-2.31-2.fc28.x86_64 135/161 Running scriptlet: libsmartcols-2.31-2.fc28.x86_64 135/161 Installing : util-linux-2.31-2.fc28.x86_64 136/161 Running scriptlet: util-linux-2.31-2.fc28.x86_64 136/161 Installing : device-mapper-1.02.145-1.fc28.x86_64 137/161 Installing : device-mapper-libs-1.02.145-1.fc28.x86_64 138/161 Running scriptlet: device-mapper-libs-1.02.145-1.fc28.x86_64 138/161 Installing : cryptsetup-libs-2.0.0-0.5.fc28.x86_64 139/161 Running scriptlet: cryptsetup-libs-2.0.0-0.5.fc28.x86_64 139/161 Installing : systemd-pam-235-4.fc28.x86_64 140/161 Running scriptlet: systemd-235-4.fc28.x86_64 141/161 Installing : systemd-235-4.fc28.x86_64 141/161 Running scriptlet: systemd-235-4.fc28.x86_64 141/161 Running scriptlet: dbus-1:1.12.0-1.fc28.x86_64 142/161 Installing : dbus-1:1.12.0-1.fc28.x86_64 142/161 Running scriptlet: dbus-1:1.12.0-1.fc28.x86_64 142/161 Installing : libnghttp2-1.27.0-1.fc28.x86_64 143/161 Running scriptlet: libnghttp2-1.27.0-1.fc28.x86_64 143/161 Installing : libcurl-7.56.1-1.fc28.x86_64 144/161 Running scriptlet: libcurl-7.56.1-1.fc28.x86_64 144/161 Installing : librepo-1.8.1-4.fc28.x86_64 145/161 Running scriptlet: librepo-1.8.1-4.fc28.x86_64 145/161 Installing : python3-librepo-1.8.1-4.fc28.x86_64 146/161 Installing : curl-7.56.1-1.fc28.x86_64 147/161 Installing : rpm-plugin-selinux-4.14.0-5.fc28.x86_64 148/161 Installing : rpm-libs-4.14.0-5.fc28.x86_64 149/161 Running scriptlet: rpm-libs-4.14.0-5.fc28.x86_64 149/161 Installing : rpm-4.14.0-5.fc28.x86_64 150/161 Installing : libsolv-0.6.30-3.git.2887.97b8c0c.fc28.x86_64 151/161 Running scriptlet: libsolv-0.6.30-3.git.2887.97b8c0c.fc28.x86_64 151/161 Installing : libdnf-0.11.1-3.fc28.x86_64 152/161 Running scriptlet: libdnf-0.11.1-3.fc28.x86_64 152/161 Installing : python3-hawkey-0.11.1-3.fc28.x86_64 153/161 Installing : deltarpm-3.6-24.fc27.x86_64 154/161 Installing : rpm-build-libs-4.14.0-5.fc28.x86_64 155/161 Running scriptlet: rpm-build-libs-4.14.0-5.fc28.x86_64 155/161 Installing : python3-rpm-4.14.0-5.fc28.x86_64 156/161 Installing : python3-dnf-2.7.5-3.fc28.noarch 157/161 Installing : python3-dnf-plugins-core-2.1.5-1.fc28.noarch 158/161 Installing : dnf-plugins-core-2.1.5-1.fc28.noarch 159/161 Installing : dnf-2.7.5-3.fc28.noarch 160/161 Running scriptlet: dnf-2.7.5-3.fc28.noarch 160/161 Installing : distribution-gpg-keys-1.16-1.fc28.noarch 161/161 Running scriptlet: fedora-release-28-0.1.noarch 161/161 Running scriptlet: filesystem-3.6-1.fc28.x86_64 161/161 Running scriptlet: glibc-all-langpacks-2.26.9000-27.fc28.x86_64 161/161 Running scriptlet: python3-3.6.3-3.fc28.x86_64 161/161 Running scriptlet: guile-5:2.0.14-4.fc28.x86_64 161/161 Running scriptlet: glib2-2.54.2-1.fc28.x86_64 161/161 Running scriptlet: systemd-235-4.fc28.x86_64 161/161 Running in chroot, ignoring request. Verifying : dnf-2.7.5-3.fc28.noarch 1/161 Verifying : dnf-plugins-core-2.1.5-1.fc28.noarch 2/161 Verifying : distribution-gpg-keys-1.16-1.fc28.noarch 3/161 Verifying : bash-4.4.12-13.fc28.x86_64 4/161 Verifying : python3-dnf-2.7.5-3.fc28.noarch 5/161 Verifying : python3-dnf-plugins-core-2.1.5-1.fc28.noarch 6/161 Verifying : filesystem-3.6-1.fc28.x86_64 7/161 Verifying : glibc-2.26.9000-27.fc28.x86_64 8/161 Verifying : ncurses-libs-6.0-14.20170916.fc28.x86_64 9/161 Verifying : deltarpm-3.6-24.fc27.x86_64 10/161 Verifying : dnf-conf-2.7.5-3.fc28.noarch 11/161 Verifying : python3-gpg-1.9.0-8.fc28.x86_64 12/161 Verifying : python3-hawkey-0.11.1-3.fc28.x86_64 13/161 Verifying : python3-iniparse-0.4-28.fc28.noarch 14/161 Verifying : python3-libcomps-0.1.8-9.fc28.x86_64 15/161 Verifying : python3-librepo-1.8.1-4.fc28.x86_64 16/161 Verifying : python3-rpm-4.14.0-5.fc28.x86_64 17/161 Verifying : setup-2.11.1-1.fc28.noarch 18/161 Verifying : basesystem-11-4.fc27.noarch 19/161 Verifying : glibc-common-2.26.9000-27.fc28.x86_64 20/161 Verifying : ncurses-base-6.0-14.20170916.fc28.noarch 21/161 Verifying : bzip2-libs-1.0.6-24.fc27.x86_64 22/161 Verifying : rpm-libs-4.14.0-5.fc28.x86_64 23/161 Verifying : xz-libs-5.2.3-5.fc28.x86_64 24/161 Verifying : zlib-1.2.11-4.fc27.x86_64 25/161 Verifying : libreport-filesystem-2.9.3-1.fc28.x86_64 26/161 Verifying : gpgme-1.9.0-8.fc28.x86_64 27/161 Verifying : python3-libs-3.6.3-3.fc28.x86_64 28/161 Verifying : glib2-2.54.2-1.fc28.x86_64 29/161 Verifying : libdnf-0.11.1-3.fc28.x86_64 30/161 Verifying : libgcc-7.2.1-1.fc28.x86_64 31/161 Verifying : libsolv-0.6.30-3.git.2887.97b8c0c.fc28.x86_64 32/161 Verifying : python3-six-1.11.0-2.fc28.noarch 33/161 Verifying : expat-2.2.5-1.fc28.x86_64 34/161 Verifying : libcomps-0.1.8-9.fc28.x86_64 35/161 Verifying : libxml2-2.9.5-2.fc28.x86_64 36/161 Verifying : libgpg-error-1.27-3.fc27.x86_64 37/161 Verifying : librepo-1.8.1-4.fc28.x86_64 38/161 Verifying : openssl-libs-1:1.1.0g-1.fc28.x86_64 39/161 Verifying : rpm-build-libs-4.14.0-5.fc28.x86_64 40/161 Verifying : libselinux-2.7-5.fc28.x86_64 41/161 Verifying : tzdata-2017c-1.fc28.noarch 42/161 Verifying : elfutils-libelf-0.170-1.fc27.x86_64 43/161 Verifying : libacl-2.2.52-18.fc27.x86_64 44/161 Verifying : libcap-2.25-7.fc27.x86_64 45/161 Verifying : libdb-5.3.28-29.fc28.x86_64 46/161 Verifying : libzstd-1.3.2-1.fc28.x86_64 47/161 Verifying : lua-libs-5.3.4-6.fc28.x86_64 48/161 Verifying : popt-1.16-12.fc28.x86_64 49/161 Verifying : rpm-4.14.0-5.fc28.x86_64 50/161 Verifying : rpm-plugin-selinux-4.14.0-5.fc28.x86_64 51/161 Verifying : gnupg2-2.2.2-2.fc28.x86_64 52/161 Verifying : libassuan-2.4.3-6.fc27.x86_64 53/161 Verifying : gdbm-1.13-3.fc27.x86_64 54/161 Verifying : libffi-3.1-14.fc27.x86_64 55/161 Verifying : readline-7.0-7.fc27.x86_64 56/161 Verifying : sqlite-libs-3.20.1-1.fc28.x86_64 57/161 Verifying : libmount-2.31-2.fc28.x86_64 58/161 Verifying : pcre-8.41-3.fc28.x86_64 59/161 Verifying : ca-certificates-2017.2.16-4.fc27.noarch 60/161 Verifying : crypto-policies-20171115-1.git921600e.fc28.noarc 61/161 Verifying : elfutils-libs-0.170-1.fc27.x86_64 62/161 Verifying : file-libs-5.32-1.fc28.x86_64 63/161 Verifying : ima-evm-utils-1.0-2.fc28.x86_64 64/161 Verifying : libsepol-2.7-2.fc28.x86_64 65/161 Verifying : pcre2-10.30-3.fc28.x86_64 66/161 Verifying : libattr-2.4.47-21.fc27.x86_64 67/161 Verifying : libarchive-3.3.1-3.fc27.x86_64 68/161 Verifying : libdb-utils-5.3.28-29.fc28.x86_64 69/161 Verifying : gnutls-3.6.1-2.fc28.x86_64 70/161 Verifying : info-6.5-1.fc28.x86_64 71/161 Verifying : libgcrypt-1.8.1-1.fc28.x86_64 72/161 Verifying : libksba-1.3.5-5.fc27.x86_64 73/161 Verifying : libusbx-1.0.21-4.fc27.x86_64 74/161 Verifying : npth-1.5-3.fc27.x86_64 75/161 Verifying : openldap-2.4.45-4.fc28.x86_64 76/161 Verifying : libblkid-2.31-2.fc28.x86_64 77/161 Verifying : libuuid-2.31-2.fc28.x86_64 78/161 Verifying : grep-3.1-3.fc27.x86_64 79/161 Verifying : sed-4.4-3.fc27.x86_64 80/161 Verifying : elfutils-default-yama-scope-0.170-1.fc27.noarch 81/161 Verifying : compat-openssl10-1:1.0.2m-1.fc28.x86_64 82/161 Verifying : keyutils-libs-1.5.10-3.fc27.x86_64 83/161 Verifying : lz4-libs-1.8.0-1.fc28.x86_64 84/161 Verifying : gmp-1:6.1.2-6.fc27.x86_64 85/161 Verifying : libidn2-2.0.4-1.fc28.x86_64 86/161 Verifying : libtasn1-4.12-3.fc27.x86_64 87/161 Verifying : libunistring-0.9.7-3.fc27.x86_64 88/161 Verifying : nettle-3.4-1.fc28.x86_64 89/161 Verifying : p11-kit-0.23.9-2.fc28.x86_64 90/161 Verifying : systemd-libs-235-4.fc28.x86_64 91/161 Verifying : cyrus-sasl-lib-2.1.26-35.fc28.x86_64 92/161 Verifying : nspr-4.17.0-1.fc28.x86_64 93/161 Verifying : nss-3.34.0-2.fc28.x86_64 94/161 Verifying : nss-util-3.34.0-2.fc28.x86_64 95/161 Verifying : make-1:4.2.1-4.fc27.x86_64 96/161 Verifying : krb5-libs-1.16-0.beta1.4.fc28.x86_64 97/161 Verifying : libcom_err-1.43.7-1.fc28.x86_64 98/161 Verifying : nss-pem-1.0.3-6.fc28.x86_64 99/161 Verifying : nss-softokn-3.34.0-2.fc28.x86_64 100/161 Verifying : nss-sysinit-3.34.0-2.fc28.x86_64 101/161 Verifying : gc-7.6.0-7.fc27.x86_64 102/161 Verifying : guile-5:2.0.14-4.fc28.x86_64 103/161 Verifying : gawk-4.2.0-1.fc28.x86_64 104/161 Verifying : libverto-0.3.0-1.fc28.x86_64 105/161 Verifying : nss-softokn-freebl-3.34.0-2.fc28.x86_64 106/161 Verifying : libatomic_ops-7.4.6-3.fc27.x86_64 107/161 Verifying : libstdc++-7.2.1-1.fc28.x86_64 108/161 Verifying : libtool-ltdl-2.4.6-20.fc27.x86_64 109/161 Verifying : libsigsegv-2.11-3.fc27.x86_64 110/161 Verifying : mpfr-3.1.5-5.fc27.x86_64 111/161 Verifying : python3-3.6.3-3.fc28.x86_64 112/161 Verifying : python3-pip-9.0.1-11.fc27.noarch 113/161 Verifying : python3-setuptools-36.2.0-8.fc28.noarch 114/161 Verifying : p11-kit-trust-0.23.9-2.fc28.x86_64 115/161 Verifying : chkconfig-1.10-3.fc27.x86_64 116/161 Verifying : systemd-235-4.fc28.x86_64 117/161 Verifying : acl-2.2.52-18.fc27.x86_64 118/161 Verifying : audit-libs-2.8.1-1.fc28.x86_64 119/161 Verifying : cryptsetup-libs-2.0.0-0.5.fc28.x86_64 120/161 Verifying : iptables-libs-1.6.1-5.fc28.x86_64 121/161 Verifying : kmod-libs-24-3.fc27.x86_64 122/161 Verifying : libidn-1.33-4.fc27.x86_64 123/161 Verifying : libseccomp-2.3.2-5.fc27.x86_64 124/161 Verifying : pam-1.3.0-6.fc28.x86_64 125/161 Verifying : qrencode-libs-3.4.4-3.fc27.x86_64 126/161 Verifying : shadow-utils-2:4.5-7.fc28.x86_64 127/161 Verifying : systemd-pam-235-4.fc28.x86_64 128/161 Verifying : libcap-ng-0.7.8-7.fc28.x86_64 129/161 Verifying : device-mapper-libs-1.02.145-1.fc28.x86_64 130/161 Verifying : json-c-0.12.1-4.fc27.x86_64 131/161 Verifying : libargon2-20161029-2.fc28.x86_64 132/161 Verifying : libpcap-14:1.8.1-6.fc27.x86_64 133/161 Verifying : emacs-filesystem-1:25.3-3.fc28.noarch 134/161 Verifying : cracklib-2.9.6-9.fc28.x86_64 135/161 Verifying : libsemanage-2.7-4.fc28.x86_64 136/161 Verifying : device-mapper-1.02.145-1.fc28.x86_64 137/161 Verifying : gzip-1.8-4.fc27.x86_64 138/161 Verifying : util-linux-2.31-2.fc28.x86_64 139/161 Verifying : libfdisk-2.31-2.fc28.x86_64 140/161 Verifying : libsmartcols-2.31-2.fc28.x86_64 141/161 Verifying : libutempter-1.1.6-11.fc27.x86_64 142/161 Verifying : dbus-1:1.12.0-1.fc28.x86_64 143/161 Verifying : dbus-libs-1:1.12.0-1.fc28.x86_64 144/161 Verifying : libpwquality-1.4.0-3.fc27.x86_64 145/161 Verifying : fedora-release-28-0.1.noarch 146/161 Verifying : fedora-repos-28-0.3.noarch 147/161 Verifying : fedora-gpg-keys-28-0.3.noarch 148/161 Verifying : fedora-repos-rawhide-28-0.3.noarch 149/161 Verifying : coreutils-8.28-2.fc28.x86_64 150/161 Verifying : coreutils-common-8.28-2.fc28.x86_64 151/161 Verifying : ncurses-6.0-14.20170916.fc28.x86_64 152/161 Verifying : curl-7.56.1-1.fc28.x86_64 153/161 Verifying : libmetalink-0.1.3-4.fc27.x86_64 154/161 Verifying : libcrypt-nss-2.26.9000-27.fc28.x86_64 155/161 Verifying : libcurl-7.56.1-1.fc28.x86_64 156/161 Verifying : libnghttp2-1.27.0-1.fc28.x86_64 157/161 Verifying : libpsl-0.19.1-1.fc28.x86_64 158/161 Verifying : libssh2-1.8.0-5.fc28.x86_64 159/161 Verifying : publicsuffix-list-dafsa-20171028-1.fc28.noarch 160/161 Verifying : glibc-all-langpacks-2.26.9000-27.fc28.x86_64 161/161 Installed: distribution-gpg-keys.noarch 1.16-1.fc28 dnf.noarch 2.7.5-3.fc28 dnf-plugins-core.noarch 2.1.5-1.fc28 acl.x86_64 2.2.52-18.fc27 audit-libs.x86_64 2.8.1-1.fc28 basesystem.noarch 11-4.fc27 bash.x86_64 4.4.12-13.fc28 bzip2-libs.x86_64 1.0.6-24.fc27 ca-certificates.noarch 2017.2.16-4.fc27 chkconfig.x86_64 1.10-3.fc27 compat-openssl10.x86_64 1:1.0.2m-1.fc28 coreutils.x86_64 8.28-2.fc28 coreutils-common.x86_64 8.28-2.fc28 cracklib.x86_64 2.9.6-9.fc28 crypto-policies.noarch 20171115-1.git921600e.fc28 cryptsetup-libs.x86_64 2.0.0-0.5.fc28 curl.x86_64 7.56.1-1.fc28 cyrus-sasl-lib.x86_64 2.1.26-35.fc28 dbus.x86_64 1:1.12.0-1.fc28 dbus-libs.x86_64 1:1.12.0-1.fc28 deltarpm.x86_64 3.6-24.fc27 device-mapper.x86_64 1.02.145-1.fc28 device-mapper-libs.x86_64 1.02.145-1.fc28 dnf-conf.noarch 2.7.5-3.fc28 elfutils-default-yama-scope.noarch 0.170-1.fc27 elfutils-libelf.x86_64 0.170-1.fc27 elfutils-libs.x86_64 0.170-1.fc27 emacs-filesystem.noarch 1:25.3-3.fc28 expat.x86_64 2.2.5-1.fc28 fedora-gpg-keys.noarch 28-0.3 fedora-release.noarch 28-0.1 fedora-repos.noarch 28-0.3 fedora-repos-rawhide.noarch 28-0.3 file-libs.x86_64 5.32-1.fc28 filesystem.x86_64 3.6-1.fc28 gawk.x86_64 4.2.0-1.fc28 gc.x86_64 7.6.0-7.fc27 gdbm.x86_64 1.13-3.fc27 glib2.x86_64 2.54.2-1.fc28 glibc.x86_64 2.26.9000-27.fc28 glibc-all-langpacks.x86_64 2.26.9000-27.fc28 glibc-common.x86_64 2.26.9000-27.fc28 gmp.x86_64 1:6.1.2-6.fc27 gnupg2.x86_64 2.2.2-2.fc28 gnutls.x86_64 3.6.1-2.fc28 gpgme.x86_64 1.9.0-8.fc28 grep.x86_64 3.1-3.fc27 guile.x86_64 5:2.0.14-4.fc28 gzip.x86_64 1.8-4.fc27 ima-evm-utils.x86_64 1.0-2.fc28 info.x86_64 6.5-1.fc28 iptables-libs.x86_64 1.6.1-5.fc28 json-c.x86_64 0.12.1-4.fc27 keyutils-libs.x86_64 1.5.10-3.fc27 kmod-libs.x86_64 24-3.fc27 krb5-libs.x86_64 1.16-0.beta1.4.fc28 libacl.x86_64 2.2.52-18.fc27 libarchive.x86_64 3.3.1-3.fc27 libargon2.x86_64 20161029-2.fc28 libassuan.x86_64 2.4.3-6.fc27 libatomic_ops.x86_64 7.4.6-3.fc27 libattr.x86_64 2.4.47-21.fc27 libblkid.x86_64 2.31-2.fc28 libcap.x86_64 2.25-7.fc27 libcap-ng.x86_64 0.7.8-7.fc28 libcom_err.x86_64 1.43.7-1.fc28 libcomps.x86_64 0.1.8-9.fc28 libcrypt-nss.x86_64 2.26.9000-27.fc28 libcurl.x86_64 7.56.1-1.fc28 libdb.x86_64 5.3.28-29.fc28 libdb-utils.x86_64 5.3.28-29.fc28 libdnf.x86_64 0.11.1-3.fc28 libfdisk.x86_64 2.31-2.fc28 libffi.x86_64 3.1-14.fc27 libgcc.x86_64 7.2.1-1.fc28 libgcrypt.x86_64 1.8.1-1.fc28 libgpg-error.x86_64 1.27-3.fc27 libidn.x86_64 1.33-4.fc27 libidn2.x86_64 2.0.4-1.fc28 libksba.x86_64 1.3.5-5.fc27 libmetalink.x86_64 0.1.3-4.fc27 libmount.x86_64 2.31-2.fc28 libnghttp2.x86_64 1.27.0-1.fc28 libpcap.x86_64 14:1.8.1-6.fc27 libpsl.x86_64 0.19.1-1.fc28 libpwquality.x86_64 1.4.0-3.fc27 librepo.x86_64 1.8.1-4.fc28 libreport-filesystem.x86_64 2.9.3-1.fc28 libseccomp.x86_64 2.3.2-5.fc27 libselinux.x86_64 2.7-5.fc28 libsemanage.x86_64 2.7-4.fc28 libsepol.x86_64 2.7-2.fc28 libsigsegv.x86_64 2.11-3.fc27 libsmartcols.x86_64 2.31-2.fc28 libsolv.x86_64 0.6.30-3.git.2887.97b8c0c.fc28 libssh2.x86_64 1.8.0-5.fc28 libstdc++.x86_64 7.2.1-1.fc28 libtasn1.x86_64 4.12-3.fc27 libtool-ltdl.x86_64 2.4.6-20.fc27 libunistring.x86_64 0.9.7-3.fc27 libusbx.x86_64 1.0.21-4.fc27 libutempter.x86_64 1.1.6-11.fc27 libuuid.x86_64 2.31-2.fc28 libverto.x86_64 0.3.0-1.fc28 libxml2.x86_64 2.9.5-2.fc28 libzstd.x86_64 1.3.2-1.fc28 lua-libs.x86_64 5.3.4-6.fc28 lz4-libs.x86_64 1.8.0-1.fc28 make.x86_64 1:4.2.1-4.fc27 mpfr.x86_64 3.1.5-5.fc27 ncurses.x86_64 6.0-14.20170916.fc28 ncurses-base.noarch 6.0-14.20170916.fc28 ncurses-libs.x86_64 6.0-14.20170916.fc28 nettle.x86_64 3.4-1.fc28 npth.x86_64 1.5-3.fc27 nspr.x86_64 4.17.0-1.fc28 nss.x86_64 3.34.0-2.fc28 nss-pem.x86_64 1.0.3-6.fc28 nss-softokn.x86_64 3.34.0-2.fc28 nss-softokn-freebl.x86_64 3.34.0-2.fc28 nss-sysinit.x86_64 3.34.0-2.fc28 nss-util.x86_64 3.34.0-2.fc28 openldap.x86_64 2.4.45-4.fc28 openssl-libs.x86_64 1:1.1.0g-1.fc28 p11-kit.x86_64 0.23.9-2.fc28 p11-kit-trust.x86_64 0.23.9-2.fc28 pam.x86_64 1.3.0-6.fc28 pcre.x86_64 8.41-3.fc28 pcre2.x86_64 10.30-3.fc28 popt.x86_64 1.16-12.fc28 publicsuffix-list-dafsa.noarch 20171028-1.fc28 python3.x86_64 3.6.3-3.fc28 python3-dnf.noarch 2.7.5-3.fc28 python3-dnf-plugins-core.noarch 2.1.5-1.fc28 python3-gpg.x86_64 1.9.0-8.fc28 python3-hawkey.x86_64 0.11.1-3.fc28 python3-iniparse.noarch 0.4-28.fc28 python3-libcomps.x86_64 0.1.8-9.fc28 python3-librepo.x86_64 1.8.1-4.fc28 python3-libs.x86_64 3.6.3-3.fc28 python3-pip.noarch 9.0.1-11.fc27 python3-rpm.x86_64 4.14.0-5.fc28 python3-setuptools.noarch 36.2.0-8.fc28 python3-six.noarch 1.11.0-2.fc28 qrencode-libs.x86_64 3.4.4-3.fc27 readline.x86_64 7.0-7.fc27 rpm.x86_64 4.14.0-5.fc28 rpm-build-libs.x86_64 4.14.0-5.fc28 rpm-libs.x86_64 4.14.0-5.fc28 rpm-plugin-selinux.x86_64 4.14.0-5.fc28 sed.x86_64 4.4-3.fc27 setup.noarch 2.11.1-1.fc28 shadow-utils.x86_64 2:4.5-7.fc28 sqlite-libs.x86_64 3.20.1-1.fc28 systemd.x86_64 235-4.fc28 systemd-libs.x86_64 235-4.fc28 systemd-pam.x86_64 235-4.fc28 tzdata.noarch 2017c-1.fc28 util-linux.x86_64 2.31-2.fc28 xz-libs.x86_64 5.2.3-5.fc28 zlib.x86_64 1.2.11-4.fc27 Complete! Finish(bootstrap): dnf install Start(bootstrap): creating root cache Finish(bootstrap): creating root cache Finish(bootstrap): chroot init Start: chroot init INFO: mounting tmpfs at /var/lib/mock/678698-fedora-rawhide-x86_64-1511428684.009244/root. INFO: calling preinit hooks INFO: enabled root cache INFO: enabled HW Info plugin Mock Version: 1.4.4 INFO: Mock Version: 1.4.4 Start: dnf install fedora 28 MB/s | 59 MB 00:02 Failed to synchronize cache for repo 'copr_base', disabling. Last metadata expiration check: 0:00:25 ago on Thu 23 Nov 2017 09:19:03 AM UTC. Dependencies resolved. ================================================================================ Group Packages ================================================================================ Marking packages as installed by the group: @Buildsystem building group patch coreutils info gcc-c++ gcc which xz tar gzip gawk shadow-utils diffutils cpio unzip bzip2 redhat-rpm-config bash findutils fedora-release grep rpm-build util-linux make sed ================================================================================ Package Arch Version Repository Size ================================================================================ Installing group packages: bash x86_64 4.4.12-13.fc28 fedora 1.5 M bzip2 x86_64 1.0.6-24.fc27 fedora 58 k coreutils x86_64 8.28-2.fc28 fedora 1.2 M cpio x86_64 2.12-6.fc27 fedora 262 k diffutils x86_64 3.6-3.fc27 fedora 354 k fedora-release noarch 28-0.1 fedora 25 k findutils x86_64 1:4.6.0-14.fc27 fedora 522 k gawk x86_64 4.2.0-1.fc28 fedora 1.1 M gcc x86_64 7.2.1-1.fc28 fedora 21 M gcc-c++ x86_64 7.2.1-1.fc28 fedora 11 M grep x86_64 3.1-3.fc27 fedora 270 k gzip x86_64 1.8-4.fc27 fedora 160 k info x86_64 6.5-1.fc28 fedora 193 k make x86_64 1:4.2.1-4.fc27 fedora 494 k patch x86_64 2.7.5-6.fc27 fedora 123 k redhat-rpm-config noarch 68-1.fc28 fedora 62 k rpm-build x86_64 4.14.0-5.fc28 fedora 160 k sed x86_64 4.4-3.fc27 fedora 288 k shadow-utils x86_64 2:4.5-7.fc28 fedora 1.2 M tar x86_64 2:1.29-7.fc27 fedora 815 k unzip x86_64 6.0-36.fc27 fedora 189 k util-linux x86_64 2.31-2.fc28 fedora 2.4 M which x86_64 2.21-4.fc27 fedora 46 k xz x86_64 5.2.3-5.fc28 fedora 150 k Installing dependencies: audit-libs x86_64 2.8.1-1.fc28 fedora 111 k basesystem noarch 11-4.fc27 fedora 8.9 k binutils x86_64 2.29.1-4.fc28 fedora 6.0 M bzip2-libs x86_64 1.0.6-24.fc27 fedora 46 k ca-certificates noarch 2017.2.16-4.fc27 fedora 452 k chkconfig x86_64 1.10-3.fc27 fedora 186 k compat-openssl10 x86_64 1:1.0.2m-1.fc28 fedora 1.1 M coreutils-common x86_64 8.28-2.fc28 fedora 1.9 M cpp x86_64 7.2.1-1.fc28 fedora 9.2 M cracklib x86_64 2.9.6-9.fc28 fedora 87 k crypto-policies noarch 20171115-1.git921600e.fc28 fedora 37 k curl x86_64 7.56.1-1.fc28 fedora 335 k cyrus-sasl-lib x86_64 2.1.26-35.fc28 fedora 161 k dwz x86_64 0.12-5.fc27 fedora 106 k elfutils x86_64 0.170-1.fc27 fedora 310 k elfutils-default-yama-scope noarch 0.170-1.fc27 fedora 39 k elfutils-libelf x86_64 0.170-1.fc27 fedora 204 k elfutils-libs x86_64 0.170-1.fc27 fedora 283 k expat x86_64 2.2.5-1.fc28 fedora 103 k fedora-gpg-keys noarch 28-0.3 fedora 93 k fedora-repos noarch 28-0.3 fedora 8.1 k fedora-repos-rawhide noarch 28-0.3 fedora 7.7 k file x86_64 5.32-1.fc28 fedora 72 k file-libs x86_64 5.32-1.fc28 fedora 514 k filesystem x86_64 3.6-1.fc28 fedora 1.1 M fpc-srpm-macros noarch 1.1-3.fc27 fedora 7.1 k gc x86_64 7.6.0-7.fc27 fedora 110 k gdb-headless x86_64 8.0.1-30.fc28 fedora 3.3 M gdbm x86_64 1.13-3.fc27 fedora 157 k ghc-srpm-macros noarch 1.4.2-6.fc27 fedora 7.9 k glib2 x86_64 2.54.2-1.fc28 fedora 2.4 M glibc x86_64 2.26.9000-27.fc28 fedora 3.4 M glibc-all-langpacks x86_64 2.26.9000-27.fc28 fedora 7.7 M glibc-common x86_64 2.26.9000-27.fc28 fedora 789 k glibc-devel x86_64 2.26.9000-27.fc28 fedora 994 k glibc-headers x86_64 2.26.9000-27.fc28 fedora 512 k gmp x86_64 1:6.1.2-6.fc27 fedora 280 k gnat-srpm-macros noarch 4-4.fc27 fedora 8.4 k gnupg2 x86_64 2.2.2-2.fc28 fedora 2.3 M gnutls x86_64 3.6.1-2.fc28 fedora 728 k go-srpm-macros noarch 2-10.fc27 fedora 8.0 k guile x86_64 5:2.0.14-4.fc28 fedora 3.5 M ima-evm-utils x86_64 1.0-2.fc28 fedora 49 k isl x86_64 0.16.1-4.fc28 fedora 835 k kernel-headers x86_64 4.15.0-0.rc0.git6.1.fc28 fedora 1.2 M keyutils-libs x86_64 1.5.10-3.fc27 fedora 32 k krb5-libs x86_64 1.16-0.beta1.4.fc28 fedora 812 k libacl x86_64 2.2.52-18.fc27 fedora 33 k libarchive x86_64 3.3.1-3.fc27 fedora 355 k libassuan x86_64 2.4.3-6.fc27 fedora 76 k libatomic_ops x86_64 7.4.6-3.fc27 fedora 33 k libattr x86_64 2.4.47-21.fc27 fedora 25 k libbabeltrace x86_64 1.5.3-1.fc27 fedora 195 k libblkid x86_64 2.31-2.fc28 fedora 202 k libcap x86_64 2.25-7.fc27 fedora 54 k libcap-ng x86_64 0.7.8-7.fc28 fedora 31 k libcom_err x86_64 1.43.7-1.fc28 fedora 46 k libcrypt-nss x86_64 2.26.9000-27.fc28 fedora 45 k libcurl x86_64 7.56.1-1.fc28 fedora 281 k libdb x86_64 5.3.28-29.fc28 fedora 753 k libdb-utils x86_64 5.3.28-29.fc28 fedora 145 k libfdisk x86_64 2.31-2.fc28 fedora 252 k libffi x86_64 3.1-14.fc27 fedora 34 k libgcc x86_64 7.2.1-1.fc28 fedora 89 k libgcrypt x86_64 1.8.1-1.fc28 fedora 453 k libgomp x86_64 7.2.1-1.fc28 fedora 197 k libgpg-error x86_64 1.27-3.fc27 fedora 183 k libidn2 x86_64 2.0.4-1.fc28 fedora 98 k libipt x86_64 1.6.1-4.fc27 fedora 47 k libksba x86_64 1.3.5-5.fc27 fedora 132 k libmetalink x86_64 0.1.3-4.fc27 fedora 30 k libmount x86_64 2.31-2.fc28 fedora 223 k libmpc x86_64 1.0.2-8.fc27 fedora 56 k libnghttp2 x86_64 1.27.0-1.fc28 fedora 73 k libpkgconf x86_64 1.3.10-1.fc28 fedora 31 k libpsl x86_64 0.19.1-1.fc28 fedora 50 k libpwquality x86_64 1.4.0-3.fc27 fedora 100 k libselinux x86_64 2.7-5.fc28 fedora 174 k libsemanage x86_64 2.7-4.fc28 fedora 157 k libsepol x86_64 2.7-2.fc28 fedora 332 k libsigsegv x86_64 2.11-3.fc27 fedora 28 k libsmartcols x86_64 2.31-2.fc28 fedora 165 k libssh2 x86_64 1.8.0-5.fc28 fedora 96 k libstdc++ x86_64 7.2.1-1.fc28 fedora 461 k libstdc++-devel x86_64 7.2.1-1.fc28 fedora 1.9 M libtasn1 x86_64 4.12-3.fc27 fedora 74 k libtool-ltdl x86_64 2.4.6-20.fc27 fedora 55 k libunistring x86_64 0.9.7-3.fc27 fedora 408 k libusbx x86_64 1.0.21-4.fc27 fedora 68 k libutempter x86_64 1.1.6-11.fc27 fedora 30 k libuuid x86_64 2.31-2.fc28 fedora 88 k libverto x86_64 0.3.0-1.fc28 fedora 22 k libxml2 x86_64 2.9.5-2.fc28 fedora 691 k libzstd x86_64 1.3.2-1.fc28 fedora 193 k lua-libs x86_64 5.3.4-6.fc28 fedora 115 k lz4-libs x86_64 1.8.0-1.fc28 fedora 49 k mpfr x86_64 3.1.5-5.fc27 fedora 216 k ncurses x86_64 6.0-14.20170916.fc28 fedora 376 k ncurses-base noarch 6.0-14.20170916.fc28 fedora 78 k ncurses-libs x86_64 6.0-14.20170916.fc28 fedora 328 k nettle x86_64 3.4-1.fc28 fedora 292 k npth x86_64 1.5-3.fc27 fedora 24 k nspr x86_64 4.17.0-1.fc28 fedora 138 k nss x86_64 3.34.0-2.fc28 fedora 668 k nss-pem x86_64 1.0.3-6.fc28 fedora 77 k nss-softokn x86_64 3.34.0-2.fc28 fedora 391 k nss-softokn-freebl x86_64 3.34.0-2.fc28 fedora 235 k nss-sysinit x86_64 3.34.0-2.fc28 fedora 63 k nss-util x86_64 3.34.0-2.fc28 fedora 89 k ocaml-srpm-macros noarch 5-2.fc27 fedora 7.8 k openblas-srpm-macros noarch 2-2.fc27 fedora 6.6 k openldap x86_64 2.4.45-4.fc28 fedora 356 k openssl-libs x86_64 1:1.1.0g-1.fc28 fedora 1.3 M p11-kit x86_64 0.23.9-2.fc28 fedora 264 k p11-kit-trust x86_64 0.23.9-2.fc28 fedora 134 k pam x86_64 1.3.0-6.fc28 fedora 749 k pcre x86_64 8.41-3.fc28 fedora 204 k pcre2 x86_64 10.30-3.fc28 fedora 233 k perl-srpm-macros noarch 1-24.fc27 fedora 9.3 k pkgconf x86_64 1.3.10-1.fc28 fedora 31 k pkgconf-m4 noarch 1.3.10-1.fc28 fedora 13 k pkgconf-pkg-config x86_64 1.3.10-1.fc28 fedora 13 k popt x86_64 1.16-12.fc28 fedora 59 k publicsuffix-list-dafsa noarch 20171028-1.fc28 fedora 46 k python-srpm-macros noarch 3-23.fc28 fedora 9.7 k python3 x86_64 3.6.3-3.fc28 fedora 68 k python3-libs x86_64 3.6.3-3.fc28 fedora 8.6 M python3-pip noarch 9.0.1-11.fc27 fedora 1.7 M python3-setuptools noarch 36.2.0-8.fc28 fedora 597 k qt5-srpm-macros noarch 5.9.2-1.fc28 fedora 8.8 k readline x86_64 7.0-7.fc27 fedora 217 k rpm x86_64 4.14.0-5.fc28 fedora 530 k rpm-build-libs x86_64 4.14.0-5.fc28 fedora 144 k rpm-libs x86_64 4.14.0-5.fc28 fedora 324 k rpm-plugin-selinux x86_64 4.14.0-5.fc28 fedora 66 k rust-srpm-macros noarch 4-3.fc27 fedora 7.7 k setup noarch 2.11.1-1.fc28 fedora 176 k sqlite-libs x86_64 3.20.1-1.fc28 fedora 537 k systemd-libs x86_64 235-4.fc28 fedora 442 k tzdata noarch 2017c-1.fc28 fedora 444 k xz-libs x86_64 5.2.3-5.fc28 fedora 91 k zip x86_64 3.0-20.fc27 fedora 270 k zlib x86_64 1.2.11-4.fc27 fedora 99 k zstd x86_64 1.3.2-1.fc28 fedora 292 k Transaction Summary ================================================================================ Install 168 Packages Total download size: 125 M Installed size: 475 M Downloading Packages: (1/168): diffutils-3.6-3.fc27.x86_64.rpm 3.5 MB/s | 354 kB 00:00 (2/168): gawk-4.2.0-1.fc28.x86_64.rpm 9.8 MB/s | 1.1 MB 00:00 (3/168): gzip-1.8-4.fc27.x86_64.rpm 7.8 MB/s | 160 kB 00:00 (4/168): make-4.2.1-4.fc27.x86_64.rpm 17 MB/s | 494 kB 00:00 (5/168): shadow-utils-4.5-7.fc28.x86_64.rpm 7.8 MB/s | 1.2 MB 00:00 (6/168): redhat-rpm-config-68-1.fc28.noarch.rpm 2.6 MB/s | 62 kB 00:00 (7/168): fedora-release-28-0.1.noarch.rpm 8.1 MB/s | 25 kB 00:00 (8/168): sed-4.4-3.fc27.x86_64.rpm 14 MB/s | 288 kB 00:00 (9/168): findutils-4.6.0-14.fc27.x86_64.rpm 11 MB/s | 522 kB 00:00 (10/168): bash-4.4.12-13.fc28.x86_64.rpm 16 MB/s | 1.5 MB 00:00 (11/168): grep-3.1-3.fc27.x86_64.rpm 11 MB/s | 270 kB 00:00 (12/168): rpm-build-4.14.0-5.fc28.x86_64.rpm 3.6 MB/s | 160 kB 00:00 (13/168): which-2.21-4.fc27.x86_64.rpm 2.0 MB/s | 46 kB 00:00 (14/168): patch-2.7.5-6.fc27.x86_64.rpm 4.4 MB/s | 123 kB 00:00 (15/168): info-6.5-1.fc28.x86_64.rpm 7.8 MB/s | 193 kB 00:00 (16/168): cpio-2.12-6.fc27.x86_64.rpm 8.9 MB/s | 262 kB 00:00 (17/168): tar-1.29-7.fc27.x86_64.rpm 15 MB/s | 815 kB 00:00 (18/168): xz-5.2.3-5.fc28.x86_64.rpm 6.0 MB/s | 150 kB 00:00 (19/168): bzip2-1.0.6-24.fc27.x86_64.rpm 2.9 MB/s | 58 kB 00:00 (20/168): coreutils-8.28-2.fc28.x86_64.rpm 19 MB/s | 1.2 MB 00:00 (21/168): util-linux-2.31-2.fc28.x86_64.rpm 29 MB/s | 2.4 MB 00:00 (22/168): unzip-6.0-36.fc27.x86_64.rpm 2.3 MB/s | 189 kB 00:00 (23/168): filesystem-3.6-1.fc28.x86_64.rpm 20 MB/s | 1.1 MB 00:00 (24/168): glibc-2.26.9000-27.fc28.x86_64.rpm 22 MB/s | 3.4 MB 00:00 (25/168): gmp-6.1.2-6.fc27.x86_64.rpm 16 MB/s | 280 kB 00:00 (26/168): libsigsegv-2.11-3.fc27.x86_64.rpm 3.7 MB/s | 28 kB 00:00 (27/168): mpfr-3.1.5-5.fc27.x86_64.rpm 10 MB/s | 216 kB 00:00 (28/168): readline-7.0-7.fc27.x86_64.rpm 9.3 MB/s | 217 kB 00:00 (29/168): audit-libs-2.8.1-1.fc28.x86_64.rpm 5.4 MB/s | 111 kB 00:00 (30/168): gcc-c++-7.2.1-1.fc28.x86_64.rpm 20 MB/s | 11 MB 00:00 (31/168): libacl-2.2.52-18.fc27.x86_64.rpm 639 kB/s | 33 kB 00:00 (32/168): libselinux-2.7-5.fc28.x86_64.rpm 8.7 MB/s | 174 kB 00:00 (33/168): libattr-2.4.47-21.fc27.x86_64.rpm 1.0 MB/s | 25 kB 00:00 (34/168): libsemanage-2.7-4.fc28.x86_64.rpm 10 MB/s | 157 kB 00:00 (35/168): setup-2.11.1-1.fc28.noarch.rpm 5.7 MB/s | 176 kB 00:00 (36/168): gc-7.6.0-7.fc27.x86_64.rpm 5.9 MB/s | 110 kB 00:00 (37/168): ncurses-libs-6.0-14.20170916.fc28.x86 16 MB/s | 328 kB 00:00 (38/168): dwz-0.12-5.fc27.x86_64.rpm 7.5 MB/s | 106 kB 00:00 (39/168): fpc-srpm-macros-1.1-3.fc27.noarch.rpm 570 kB/s | 7.1 kB 00:00 (40/168): ghc-srpm-macros-1.4.2-6.fc27.noarch.r 389 kB/s | 7.9 kB 00:00 (41/168): gnat-srpm-macros-4-4.fc27.noarch.rpm 555 kB/s | 8.4 kB 00:00 (42/168): go-srpm-macros-2-10.fc27.noarch.rpm 410 kB/s | 8.0 kB 00:00 (43/168): guile-2.0.14-4.fc28.x86_64.rpm 27 MB/s | 3.5 MB 00:00 (44/168): ocaml-srpm-macros-5-2.fc27.noarch.rpm 383 kB/s | 7.8 kB 00:00 (45/168): openblas-srpm-macros-2-2.fc27.noarch. 970 kB/s | 6.6 kB 00:00 (46/168): perl-srpm-macros-1-24.fc27.noarch.rpm 695 kB/s | 9.3 kB 00:00 (47/168): python-srpm-macros-3-23.fc28.noarch.r 1.0 MB/s | 9.7 kB 00:00 (48/168): gcc-7.2.1-1.fc28.x86_64.rpm 26 MB/s | 21 MB 00:00 (49/168): qt5-srpm-macros-5.9.2-1.fc28.noarch.r 77 kB/s | 8.8 kB 00:00 (50/168): rpm-4.14.0-5.fc28.x86_64.rpm 3.4 MB/s | 530 kB 00:00 (51/168): rust-srpm-macros-4-3.fc27.noarch.rpm 172 kB/s | 7.7 kB 00:00 (52/168): zip-3.0-20.fc27.x86_64.rpm 5.3 MB/s | 270 kB 00:00 (53/168): fedora-repos-28-0.3.noarch.rpm 986 kB/s | 8.1 kB 00:00 (54/168): bzip2-libs-1.0.6-24.fc27.x86_64.rpm 8.9 MB/s | 46 kB 00:00 (55/168): elfutils-libelf-0.170-1.fc27.x86_64.r 13 MB/s | 204 kB 00:00 (56/168): elfutils-0.170-1.fc27.x86_64.rpm 12 MB/s | 310 kB 00:00 (57/168): elfutils-libs-0.170-1.fc27.x86_64.rpm 14 MB/s | 283 kB 00:00 (58/168): file-5.32-1.fc28.x86_64.rpm 3.9 MB/s | 72 kB 00:00 (59/168): file-libs-5.32-1.fc28.x86_64.rpm 15 MB/s | 514 kB 00:00 (60/168): libcap-2.25-7.fc27.x86_64.rpm 2.6 MB/s | 54 kB 00:00 (61/168): gdb-headless-8.0.1-30.fc28.x86_64.rpm 28 MB/s | 3.3 MB 00:00 (62/168): libdb-5.3.28-29.fc28.x86_64.rpm 10 MB/s | 753 kB 00:00 (63/168): libzstd-1.3.2-1.fc28.x86_64.rpm 23 MB/s | 193 kB 00:00 (64/168): binutils-2.29.1-4.fc28.x86_64.rpm 28 MB/s | 6.0 MB 00:00 (65/168): lua-libs-5.3.4-6.fc28.x86_64.rpm 3.3 MB/s | 115 kB 00:00 (66/168): popt-1.16-12.fc28.x86_64.rpm 9.9 MB/s | 59 kB 00:00 (67/168): rpm-build-libs-4.14.0-5.fc28.x86_64.r 13 MB/s | 144 kB 00:00 (68/168): openssl-libs-1.1.0g-1.fc28.x86_64.rpm 25 MB/s | 1.3 MB 00:00 (69/168): rpm-libs-4.14.0-5.fc28.x86_64.rpm 15 MB/s | 324 kB 00:00 (70/168): xz-libs-5.2.3-5.fc28.x86_64.rpm 5.8 MB/s | 91 kB 00:00 (71/168): zlib-1.2.11-4.fc27.x86_64.rpm 5.5 MB/s | 99 kB 00:00 (72/168): pcre-8.41-3.fc28.x86_64.rpm 9.6 MB/s | 204 kB 00:00 (73/168): zstd-1.3.2-1.fc28.x86_64.rpm 8.3 MB/s | 292 kB 00:00 (74/168): ncurses-6.0-14.20170916.fc28.x86_64.r 14 MB/s | 376 kB 00:00 (75/168): libmpc-1.0.2-8.fc27.x86_64.rpm 3.2 MB/s | 56 kB 00:00 (76/168): coreutils-common-8.28-2.fc28.x86_64.r 33 MB/s | 1.9 MB 00:00 (77/168): libblkid-2.31-2.fc28.x86_64.rpm 8.9 MB/s | 202 kB 00:00 (78/168): libcap-ng-0.7.8-7.fc28.x86_64.rpm 5.9 MB/s | 31 kB 00:00 (79/168): libstdc++-7.2.1-1.fc28.x86_64.rpm 12 MB/s | 461 kB 00:00 (80/168): libmount-2.31-2.fc28.x86_64.rpm 16 MB/s | 223 kB 00:00 (81/168): libfdisk-2.31-2.fc28.x86_64.rpm 14 MB/s | 252 kB 00:00 (82/168): libutempter-1.1.6-11.fc27.x86_64.rpm 3.7 MB/s | 30 kB 00:00 (83/168): libsmartcols-2.31-2.fc28.x86_64.rpm 10 MB/s | 165 kB 00:00 (84/168): libuuid-2.31-2.fc28.x86_64.rpm 7.1 MB/s | 88 kB 00:00 (85/168): pam-1.3.0-6.fc28.x86_64.rpm 41 MB/s | 749 kB 00:00 (86/168): systemd-libs-235-4.fc28.x86_64.rpm 19 MB/s | 442 kB 00:00 (87/168): libgcc-7.2.1-1.fc28.x86_64.rpm 3.2 MB/s | 89 kB 00:00 (88/168): isl-0.16.1-4.fc28.x86_64.rpm 6.4 MB/s | 835 kB 00:00 (89/168): libgomp-7.2.1-1.fc28.x86_64.rpm 1.8 MB/s | 197 kB 00:00 (90/168): cpp-7.2.1-1.fc28.x86_64.rpm 42 MB/s | 9.2 MB 00:00 (91/168): basesystem-11-4.fc27.noarch.rpm 113 kB/s | 8.9 kB 00:00 (92/168): pcre2-10.30-3.fc28.x86_64.rpm 18 MB/s | 233 kB 00:00 (93/168): libsepol-2.7-2.fc28.x86_64.rpm 19 MB/s | 332 kB 00:00 (94/168): libatomic_ops-7.4.6-3.fc27.x86_64.rpm 6.3 MB/s | 33 kB 00:00 (95/168): libffi-3.1-14.fc27.x86_64.rpm 8.4 MB/s | 34 kB 00:00 (96/168): glibc-common-2.26.9000-27.fc28.x86_64 8.7 MB/s | 789 kB 00:00 (97/168): libtool-ltdl-2.4.6-20.fc27.x86_64.rpm 7.1 MB/s | 55 kB 00:00 (98/168): ncurses-base-6.0-14.20170916.fc28.noa 13 MB/s | 78 kB 00:00 (99/168): libunistring-0.9.7-3.fc27.x86_64.rpm 26 MB/s | 408 kB 00:00 (100/168): libarchive-3.3.1-3.fc27.x86_64.rpm 23 MB/s | 355 kB 00:00 (101/168): libdb-utils-5.3.28-29.fc28.x86_64.rp 13 MB/s | 145 kB 00:00 (102/168): fedora-repos-rawhide-28-0.3.noarch.r 1.5 MB/s | 7.7 kB 00:00 (103/168): fedora-gpg-keys-28-0.3.noarch.rpm 7.0 MB/s | 93 kB 00:00 (104/168): elfutils-default-yama-scope-0.170-1. 10 MB/s | 39 kB 00:00 (105/168): chkconfig-1.10-3.fc27.x86_64.rpm 18 MB/s | 186 kB 00:00 (106/168): expat-2.2.5-1.fc28.x86_64.rpm 8.8 MB/s | 103 kB 00:00 (107/168): libbabeltrace-1.5.3-1.fc27.x86_64.rp 15 MB/s | 195 kB 00:00 (108/168): libipt-1.6.1-4.fc27.x86_64.rpm 3.7 MB/s | 47 kB 00:00 (109/168): crypto-policies-20171115-1.git921600 2.5 MB/s | 37 kB 00:00 (110/168): ca-certificates-2017.2.16-4.fc27.noa 14 MB/s | 452 kB 00:00 (111/168): ima-evm-utils-1.0-2.fc28.x86_64.rpm 3.3 MB/s | 49 kB 00:00 (112/168): rpm-plugin-selinux-4.14.0-5.fc28.x86 3.8 MB/s | 66 kB 00:00 (113/168): gnupg2-2.2.2-2.fc28.x86_64.rpm 28 MB/s | 2.3 MB 00:00 (114/168): cracklib-2.9.6-9.fc28.x86_64.rpm 2.6 MB/s | 87 kB 00:00 (115/168): lz4-libs-1.8.0-1.fc28.x86_64.rpm 4.0 MB/s | 49 kB 00:00 (116/168): libgcrypt-1.8.1-1.fc28.x86_64.rpm 13 MB/s | 453 kB 00:00 (117/168): tzdata-2017c-1.fc28.noarch.rpm 16 MB/s | 444 kB 00:00 (118/168): libxml2-2.9.5-2.fc28.x86_64.rpm 11 MB/s | 691 kB 00:00 (119/168): gdbm-1.13-3.fc27.x86_64.rpm 6.8 MB/s | 157 kB 00:00 (120/168): glib2-2.54.2-1.fc28.x86_64.rpm 26 MB/s | 2.4 MB 00:00 (121/168): python3-libs-3.6.3-3.fc28.x86_64.rpm 30 MB/s | 8.6 MB 00:00 (122/168): sqlite-libs-3.20.1-1.fc28.x86_64.rpm 7.4 MB/s | 537 kB 00:00 (123/168): gnutls-3.6.1-2.fc28.x86_64.rpm 11 MB/s | 728 kB 00:00 (124/168): libassuan-2.4.3-6.fc27.x86_64.rpm 3.8 MB/s | 76 kB 00:00 (125/168): libgpg-error-1.27-3.fc27.x86_64.rpm 8.5 MB/s | 183 kB 00:00 (126/168): libksba-1.3.5-5.fc27.x86_64.rpm 10 MB/s | 132 kB 00:00 (127/168): libusbx-1.0.21-4.fc27.x86_64.rpm 6.8 MB/s | 68 kB 00:00 (128/168): npth-1.5-3.fc27.x86_64.rpm 2.0 MB/s | 24 kB 00:00 (129/168): openldap-2.4.45-4.fc28.x86_64.rpm 19 MB/s | 356 kB 00:00 (130/168): keyutils-libs-1.5.10-3.fc27.x86_64.r 2.9 MB/s | 32 kB 00:00 (131/168): libidn2-2.0.4-1.fc28.x86_64.rpm 13 MB/s | 98 kB 00:00 (132/168): libtasn1-4.12-3.fc27.x86_64.rpm 8.4 MB/s | 74 kB 00:00 (133/168): compat-openssl10-1.0.2m-1.fc28.x86_6 28 MB/s | 1.1 MB 00:00 (134/168): nettle-3.4-1.fc28.x86_64.rpm 14 MB/s | 292 kB 00:00 (135/168): p11-kit-0.23.9-2.fc28.x86_64.rpm 13 MB/s | 264 kB 00:00 (136/168): cyrus-sasl-lib-2.1.26-35.fc28.x86_64 17 MB/s | 161 kB 00:00 (137/168): nspr-4.17.0-1.fc28.x86_64.rpm 14 MB/s | 138 kB 00:00 (138/168): nss-util-3.34.0-2.fc28.x86_64.rpm 10 MB/s | 89 kB 00:00 (139/168): libcom_err-1.43.7-1.fc28.x86_64.rpm 3.6 MB/s | 46 kB 00:00 (140/168): nss-3.34.0-2.fc28.x86_64.rpm 21 MB/s | 668 kB 00:00 (141/168): nss-pem-1.0.3-6.fc28.x86_64.rpm 7.6 MB/s | 77 kB 00:00 (142/168): krb5-libs-1.16-0.beta1.4.fc28.x86_64 24 MB/s | 812 kB 00:00 (143/168): nss-sysinit-3.34.0-2.fc28.x86_64.rpm 5.7 MB/s | 63 kB 00:00 (144/168): nss-softokn-3.34.0-2.fc28.x86_64.rpm 23 MB/s | 391 kB 00:00 (145/168): libverto-0.3.0-1.fc28.x86_64.rpm 1.0 MB/s | 22 kB 00:00 (146/168): nss-softokn-freebl-3.34.0-2.fc28.x86 6.8 MB/s | 235 kB 00:00 (147/168): pkgconf-pkg-config-1.3.10-1.fc28.x86 411 kB/s | 13 kB 00:00 (148/168): pkgconf-1.3.10-1.fc28.x86_64.rpm 1.8 MB/s | 31 kB 00:00 (149/168): python3-3.6.3-3.fc28.x86_64.rpm 2.5 MB/s | 68 kB 00:00 (150/168): libpkgconf-1.3.10-1.fc28.x86_64.rpm 1.0 MB/s | 31 kB 00:00 (151/168): pkgconf-m4-1.3.10-1.fc28.noarch.rpm 425 kB/s | 13 kB 00:00 (152/168): libpwquality-1.4.0-3.fc27.x86_64.rpm 7.7 MB/s | 100 kB 00:00 (153/168): python3-setuptools-36.2.0-8.fc28.noa 14 MB/s | 597 kB 00:00 (154/168): p11-kit-trust-0.23.9-2.fc28.x86_64.r 3.4 MB/s | 134 kB 00:00 (155/168): python3-pip-9.0.1-11.fc27.noarch.rpm 20 MB/s | 1.7 MB 00:00 (156/168): glibc-devel-2.26.9000-27.fc28.x86_64 15 MB/s | 994 kB 00:00 (157/168): libstdc++-devel-7.2.1-1.fc28.x86_64. 14 MB/s | 1.9 MB 00:00 (158/168): glibc-headers-2.26.9000-27.fc28.x86_ 5.2 MB/s | 512 kB 00:00 (159/168): kernel-headers-4.15.0-0.rc0.git6.1.f 15 MB/s | 1.2 MB 00:00 (160/168): libcrypt-nss-2.26.9000-27.fc28.x86_6 2.9 MB/s | 45 kB 00:00 (161/168): curl-7.56.1-1.fc28.x86_64.rpm 17 MB/s | 335 kB 00:00 (162/168): libmetalink-0.1.3-4.fc27.x86_64.rpm 3.3 MB/s | 30 kB 00:00 (163/168): libnghttp2-1.27.0-1.fc28.x86_64.rpm 5.3 MB/s | 73 kB 00:00 (164/168): libcurl-7.56.1-1.fc28.x86_64.rpm 13 MB/s | 281 kB 00:00 (165/168): libpsl-0.19.1-1.fc28.x86_64.rpm 3.8 MB/s | 50 kB 00:00 (166/168): libssh2-1.8.0-5.fc28.x86_64.rpm 11 MB/s | 96 kB 00:00 (167/168): publicsuffix-list-dafsa-20171028-1.f 3.8 MB/s | 46 kB 00:00 (168/168): glibc-all-langpacks-2.26.9000-27.fc2 26 MB/s | 7.7 MB 00:00 -------------------------------------------------------------------------------- Total 39 MB/s | 125 MB 00:03 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Running scriptlet: filesystem-3.6-1.fc28.x86_64 1/1 Preparing : 1/1 Installing : libgcc-7.2.1-1.fc28.x86_64 1/168 Running scriptlet: libgcc-7.2.1-1.fc28.x86_64 1/168 Installing : publicsuffix-list-dafsa-20171028-1.fc28.noarch 2/168 Installing : kernel-headers-4.15.0-0.rc0.git6.1.fc28.x86_64 3/168 Installing : pkgconf-m4-1.3.10-1.fc28.noarch 4/168 Installing : tzdata-2017c-1.fc28.noarch 5/168 Installing : fedora-gpg-keys-28-0.3.noarch 6/168 Installing : fedora-repos-rawhide-28-0.3.noarch 7/168 Installing : fedora-repos-28-0.3.noarch 8/168 Installing : fedora-release-28-0.1.noarch 9/168 Running scriptlet: fedora-release-28-0.1.noarch 9/168 Installing : setup-2.11.1-1.fc28.noarch 10/168 Running scriptlet: setup-2.11.1-1.fc28.noarch 10/168 warning: /etc/hosts created as /etc/hosts.rpmnew Installing : filesystem-3.6-1.fc28.x86_64 11/168 Installing : basesystem-11-4.fc27.noarch 12/168 Installing : ncurses-base-6.0-14.20170916.fc28.noarch 13/168 Installing : glibc-all-langpacks-2.26.9000-27.fc28.x86_64 14/168 Installing : glibc-common-2.26.9000-27.fc28.x86_64 15/168 Running scriptlet: glibc-2.26.9000-27.fc28.x86_64 16/168 Installing : glibc-2.26.9000-27.fc28.x86_64 16/168 Running scriptlet: glibc-2.26.9000-27.fc28.x86_64 16/168 Installing : ncurses-libs-6.0-14.20170916.fc28.x86_64 17/168 Running scriptlet: ncurses-libs-6.0-14.20170916.fc28.x86_64 17/168 Installing : bash-4.4.12-13.fc28.x86_64 18/168 Running scriptlet: bash-4.4.12-13.fc28.x86_64 18/168 Installing : libsepol-2.7-2.fc28.x86_64 19/168 Running scriptlet: libsepol-2.7-2.fc28.x86_64 19/168 Installing : pcre2-10.30-3.fc28.x86_64 20/168 Running scriptlet: pcre2-10.30-3.fc28.x86_64 20/168 Installing : libselinux-2.7-5.fc28.x86_64 21/168 Running scriptlet: libselinux-2.7-5.fc28.x86_64 21/168 Installing : zlib-1.2.11-4.fc27.x86_64 22/168 Running scriptlet: zlib-1.2.11-4.fc27.x86_64 22/168 Installing : info-6.5-1.fc28.x86_64 23/168 Running scriptlet: info-6.5-1.fc28.x86_64 23/168 Installing : bzip2-libs-1.0.6-24.fc27.x86_64 24/168 Running scriptlet: bzip2-libs-1.0.6-24.fc27.x86_64 24/168 Installing : xz-libs-5.2.3-5.fc28.x86_64 25/168 Running scriptlet: xz-libs-5.2.3-5.fc28.x86_64 25/168 Installing : gmp-1:6.1.2-6.fc27.x86_64 26/168 Running scriptlet: gmp-1:6.1.2-6.fc27.x86_64 26/168 Installing : elfutils-libelf-0.170-1.fc27.x86_64 27/168 Running scriptlet: elfutils-libelf-0.170-1.fc27.x86_64 27/168 Installing : libdb-5.3.28-29.fc28.x86_64 28/168 Running scriptlet: libdb-5.3.28-29.fc28.x86_64 28/168 Installing : popt-1.16-12.fc28.x86_64 29/168 Running scriptlet: popt-1.16-12.fc28.x86_64 29/168 Installing : nspr-4.17.0-1.fc28.x86_64 30/168 Running scriptlet: nspr-4.17.0-1.fc28.x86_64 30/168 Installing : nss-util-3.34.0-2.fc28.x86_64 31/168 Running scriptlet: nss-util-3.34.0-2.fc28.x86_64 31/168 Installing : readline-7.0-7.fc27.x86_64 32/168 Running scriptlet: readline-7.0-7.fc27.x86_64 32/168 Installing : libcap-2.25-7.fc27.x86_64 33/168 Running scriptlet: libcap-2.25-7.fc27.x86_64 33/168 Installing : libstdc++-7.2.1-1.fc28.x86_64 34/168 Running scriptlet: libstdc++-7.2.1-1.fc28.x86_64 34/168 Installing : mpfr-3.1.5-5.fc27.x86_64 35/168 Running scriptlet: mpfr-3.1.5-5.fc27.x86_64 35/168 Installing : libzstd-1.3.2-1.fc28.x86_64 36/168 Running scriptlet: libzstd-1.3.2-1.fc28.x86_64 36/168 Installing : lua-libs-5.3.4-6.fc28.x86_64 37/168 Installing : libuuid-2.31-2.fc28.x86_64 38/168 Running scriptlet: libuuid-2.31-2.fc28.x86_64 38/168 Installing : libffi-3.1-14.fc27.x86_64 39/168 Running scriptlet: libffi-3.1-14.fc27.x86_64 39/168 Installing : libunistring-0.9.7-3.fc27.x86_64 40/168 Running scriptlet: libunistring-0.9.7-3.fc27.x86_64 40/168 Installing : libattr-2.4.47-21.fc27.x86_64 41/168 Running scriptlet: libattr-2.4.47-21.fc27.x86_64 41/168 Installing : libacl-2.2.52-18.fc27.x86_64 42/168 Running scriptlet: libacl-2.2.52-18.fc27.x86_64 42/168 Installing : sed-4.4-3.fc27.x86_64 43/168 Running scriptlet: sed-4.4-3.fc27.x86_64 43/168 Installing : libgpg-error-1.27-3.fc27.x86_64 44/168 Running scriptlet: libgpg-error-1.27-3.fc27.x86_64 44/168 Installing : libidn2-2.0.4-1.fc28.x86_64 45/168 Running scriptlet: libidn2-2.0.4-1.fc28.x86_64 45/168 Installing : p11-kit-0.23.9-2.fc28.x86_64 46/168 Running scriptlet: p11-kit-0.23.9-2.fc28.x86_64 46/168 Installing : libmpc-1.0.2-8.fc27.x86_64 47/168 Running scriptlet: libmpc-1.0.2-8.fc27.x86_64 47/168 Installing : file-libs-5.32-1.fc28.x86_64 48/168 Running scriptlet: file-libs-5.32-1.fc28.x86_64 48/168 Installing : expat-2.2.5-1.fc28.x86_64 49/168 Running scriptlet: expat-2.2.5-1.fc28.x86_64 49/168 Installing : sqlite-libs-3.20.1-1.fc28.x86_64 50/168 Running scriptlet: sqlite-libs-3.20.1-1.fc28.x86_64 50/168 Installing : libcom_err-1.43.7-1.fc28.x86_64 51/168 Running scriptlet: libcom_err-1.43.7-1.fc28.x86_64 51/168 Installing : libgcrypt-1.8.1-1.fc28.x86_64 52/168 Running scriptlet: libgcrypt-1.8.1-1.fc28.x86_64 52/168 Installing : nss-softokn-freebl-3.34.0-2.fc28.x86_64 53/168 Installing : libcrypt-nss-2.26.9000-27.fc28.x86_64 54/168 Running scriptlet: libcrypt-nss-2.26.9000-27.fc28.x86_64 54/168 Installing : chkconfig-1.10-3.fc27.x86_64 55/168 Installing : unzip-6.0-36.fc27.x86_64 56/168 Installing : pcre-8.41-3.fc28.x86_64 57/168 Running scriptlet: pcre-8.41-3.fc28.x86_64 57/168 Installing : grep-3.1-3.fc27.x86_64 58/168 Running scriptlet: grep-3.1-3.fc27.x86_64 58/168 Installing : libcap-ng-0.7.8-7.fc28.x86_64 59/168 Running scriptlet: libcap-ng-0.7.8-7.fc28.x86_64 59/168 Installing : audit-libs-2.8.1-1.fc28.x86_64 60/168 Running scriptlet: audit-libs-2.8.1-1.fc28.x86_64 60/168 Installing : lz4-libs-1.8.0-1.fc28.x86_64 61/168 Running scriptlet: lz4-libs-1.8.0-1.fc28.x86_64 61/168 Installing : systemd-libs-235-4.fc28.x86_64 62/168 Running scriptlet: systemd-libs-235-4.fc28.x86_64 62/168 Installing : keyutils-libs-1.5.10-3.fc27.x86_64 63/168 Running scriptlet: keyutils-libs-1.5.10-3.fc27.x86_64 63/168 Installing : libtasn1-4.12-3.fc27.x86_64 64/168 Running scriptlet: libtasn1-4.12-3.fc27.x86_64 64/168 Installing : p11-kit-trust-0.23.9-2.fc28.x86_64 65/168 Running scriptlet: p11-kit-trust-0.23.9-2.fc28.x86_64 65/168 Running scriptlet: ca-certificates-2017.2.16-4.fc27.noarch 66/168 Installing : ca-certificates-2017.2.16-4.fc27.noarch 66/168 Running scriptlet: ca-certificates-2017.2.16-4.fc27.noarch 66/168 Installing : libusbx-1.0.21-4.fc27.x86_64 67/168 Running scriptlet: libusbx-1.0.21-4.fc27.x86_64 67/168 Installing : libsemanage-2.7-4.fc28.x86_64 68/168 Running scriptlet: libsemanage-2.7-4.fc28.x86_64 68/168 Installing : xz-5.2.3-5.fc28.x86_64 69/168 Installing : zip-3.0-20.fc27.x86_64 70/168 Installing : nss-softokn-3.34.0-2.fc28.x86_64 71/168 Running scriptlet: nss-softokn-3.34.0-2.fc28.x86_64 71/168 Installing : libmetalink-0.1.3-4.fc27.x86_64 72/168 Running scriptlet: libmetalink-0.1.3-4.fc27.x86_64 72/168 Installing : file-5.32-1.fc28.x86_64 73/168 Installing : cpp-7.2.1-1.fc28.x86_64 74/168 Running scriptlet: cpp-7.2.1-1.fc28.x86_64 74/168 Installing : libpsl-0.19.1-1.fc28.x86_64 75/168 Running scriptlet: libpsl-0.19.1-1.fc28.x86_64 75/168 Installing : libassuan-2.4.3-6.fc27.x86_64 76/168 Running scriptlet: libassuan-2.4.3-6.fc27.x86_64 76/168 Installing : libksba-1.3.5-5.fc27.x86_64 77/168 Running scriptlet: libksba-1.3.5-5.fc27.x86_64 77/168 Installing : tar-2:1.29-7.fc27.x86_64 78/168 Running scriptlet: tar-2:1.29-7.fc27.x86_64 78/168 Installing : patch-2.7.5-6.fc27.x86_64 79/168 Installing : zstd-1.3.2-1.fc28.x86_64 80/168 Installing : libstdc++-devel-7.2.1-1.fc28.x86_64 81/168 Installing : gdbm-1.13-3.fc27.x86_64 82/168 Running scriptlet: gdbm-1.13-3.fc27.x86_64 82/168 Installing : libdb-utils-5.3.28-29.fc28.x86_64 83/168 Installing : dwz-0.12-5.fc27.x86_64 84/168 Installing : isl-0.16.1-4.fc28.x86_64 85/168 Running scriptlet: isl-0.16.1-4.fc28.x86_64 85/168 Installing : nettle-3.4-1.fc28.x86_64 86/168 Running scriptlet: nettle-3.4-1.fc28.x86_64 86/168 Installing : libxml2-2.9.5-2.fc28.x86_64 87/168 Running scriptlet: libxml2-2.9.5-2.fc28.x86_64 87/168 Installing : bzip2-1.0.6-24.fc27.x86_64 88/168 Installing : diffutils-3.6-3.fc27.x86_64 89/168 Running scriptlet: diffutils-3.6-3.fc27.x86_64 89/168 Installing : findutils-1:4.6.0-14.fc27.x86_64 90/168 Running scriptlet: findutils-1:4.6.0-14.fc27.x86_64 90/168 Installing : cpio-2.12-6.fc27.x86_64 91/168 Running scriptlet: cpio-2.12-6.fc27.x86_64 91/168 Installing : coreutils-common-8.28-2.fc28.x86_64 92/168 Running scriptlet: coreutils-common-8.28-2.fc28.x86_64 92/168 Installing : libgomp-7.2.1-1.fc28.x86_64 93/168 Running scriptlet: libgomp-7.2.1-1.fc28.x86_64 93/168 Installing : elfutils-default-yama-scope-0.170-1.fc27.noarch 94/168 Running scriptlet: elfutils-default-yama-scope-0.170-1.fc27.noarch 94/168 Installing : elfutils-libs-0.170-1.fc27.x86_64 95/168 Running scriptlet: elfutils-libs-0.170-1.fc27.x86_64 95/168 Installing : elfutils-0.170-1.fc27.x86_64 96/168 Running scriptlet: glibc-headers-2.26.9000-27.fc28.x86_64 97/168 Installing : glibc-headers-2.26.9000-27.fc28.x86_64 97/168 Installing : glibc-devel-2.26.9000-27.fc28.x86_64 98/168 Running scriptlet: glibc-devel-2.26.9000-27.fc28.x86_64 98/168 Installing : ncurses-6.0-14.20170916.fc28.x86_64 99/168 Installing : openssl-libs-1:1.1.0g-1.fc28.x86_64 100/168 Running scriptlet: openssl-libs-1:1.1.0g-1.fc28.x86_64 100/168 Installing : coreutils-8.28-2.fc28.x86_64 101/168 Installing : crypto-policies-20171115-1.git921600e.fc28.noarc 102/168 Running scriptlet: crypto-policies-20171115-1.git921600e.fc28.noarc 102/168 Installing : libblkid-2.31-2.fc28.x86_64 103/168 Running scriptlet: libblkid-2.31-2.fc28.x86_64 103/168 Installing : libmount-2.31-2.fc28.x86_64 104/168 Running scriptlet: libmount-2.31-2.fc28.x86_64 104/168 Installing : gzip-1.8-4.fc27.x86_64 105/168 Running scriptlet: gzip-1.8-4.fc27.x86_64 105/168 Installing : cracklib-2.9.6-9.fc28.x86_64 106/168 Running scriptlet: cracklib-2.9.6-9.fc28.x86_64 106/168 Installing : pam-1.3.0-6.fc28.x86_64 107/168 Running scriptlet: pam-1.3.0-6.fc28.x86_64 107/168 Installing : libpwquality-1.4.0-3.fc27.x86_64 108/168 Running scriptlet: libpwquality-1.4.0-3.fc27.x86_64 108/168 Installing : binutils-2.29.1-4.fc28.x86_64 109/168 Running scriptlet: binutils-2.29.1-4.fc28.x86_64 109/168 Installing : python3-pip-9.0.1-11.fc27.noarch 110/168 Installing : python3-setuptools-36.2.0-8.fc28.noarch 111/168 Installing : python3-3.6.3-3.fc28.x86_64 112/168 Running scriptlet: python3-3.6.3-3.fc28.x86_64 112/168 Installing : python3-libs-3.6.3-3.fc28.x86_64 113/168 Running scriptlet: python3-libs-3.6.3-3.fc28.x86_64 113/168 Installing : gcc-7.2.1-1.fc28.x86_64 114/168 Running scriptlet: gcc-7.2.1-1.fc28.x86_64 114/168 Installing : glib2-2.54.2-1.fc28.x86_64 115/168 Running scriptlet: glib2-2.54.2-1.fc28.x86_64 115/168 Installing : libbabeltrace-1.5.3-1.fc27.x86_64 116/168 Running scriptlet: libbabeltrace-1.5.3-1.fc27.x86_64 116/168 Installing : libfdisk-2.31-2.fc28.x86_64 117/168 Running scriptlet: libfdisk-2.31-2.fc28.x86_64 117/168 Installing : gnutls-3.6.1-2.fc28.x86_64 118/168 Running scriptlet: gnutls-3.6.1-2.fc28.x86_64 118/168 Installing : shadow-utils-2:4.5-7.fc28.x86_64 119/168 Running scriptlet: libutempter-1.1.6-11.fc27.x86_64 120/168 Installing : libutempter-1.1.6-11.fc27.x86_64 120/168 Running scriptlet: libutempter-1.1.6-11.fc27.x86_64 120/168 Installing : nss-pem-1.0.3-6.fc28.x86_64 121/168 Installing : nss-sysinit-3.34.0-2.fc28.x86_64 122/168 Installing : nss-3.34.0-2.fc28.x86_64 123/168 Running scriptlet: nss-3.34.0-2.fc28.x86_64 123/168 Installing : libarchive-3.3.1-3.fc27.x86_64 124/168 Running scriptlet: libarchive-3.3.1-3.fc27.x86_64 124/168 Installing : libssh2-1.8.0-5.fc28.x86_64 125/168 Running scriptlet: libssh2-1.8.0-5.fc28.x86_64 125/168 Installing : libsigsegv-2.11-3.fc27.x86_64 126/168 Running scriptlet: libsigsegv-2.11-3.fc27.x86_64 126/168 Installing : gawk-4.2.0-1.fc28.x86_64 127/168 Running scriptlet: gawk-4.2.0-1.fc28.x86_64 127/168 Installing : libsmartcols-2.31-2.fc28.x86_64 128/168 Running scriptlet: libsmartcols-2.31-2.fc28.x86_64 128/168 Installing : libatomic_ops-7.4.6-3.fc27.x86_64 129/168 Running scriptlet: libatomic_ops-7.4.6-3.fc27.x86_64 129/168 Installing : gc-7.6.0-7.fc27.x86_64 130/168 Running scriptlet: gc-7.6.0-7.fc27.x86_64 130/168 Installing : libtool-ltdl-2.4.6-20.fc27.x86_64 131/168 Running scriptlet: libtool-ltdl-2.4.6-20.fc27.x86_64 131/168 Installing : guile-5:2.0.14-4.fc28.x86_64 132/168 Running scriptlet: guile-5:2.0.14-4.fc28.x86_64 132/168 Installing : make-1:4.2.1-4.fc27.x86_64 133/168 Running scriptlet: make-1:4.2.1-4.fc27.x86_64 133/168 Installing : compat-openssl10-1:1.0.2m-1.fc28.x86_64 134/168 Running scriptlet: compat-openssl10-1:1.0.2m-1.fc28.x86_64 134/168 Installing : ima-evm-utils-1.0-2.fc28.x86_64 135/168 Running scriptlet: ima-evm-utils-1.0-2.fc28.x86_64 135/168 Installing : libipt-1.6.1-4.fc27.x86_64 136/168 Running scriptlet: libipt-1.6.1-4.fc27.x86_64 136/168 Installing : gdb-headless-8.0.1-30.fc28.x86_64 137/168 Installing : npth-1.5-3.fc27.x86_64 138/168 Running scriptlet: npth-1.5-3.fc27.x86_64 138/168 Installing : libverto-0.3.0-1.fc28.x86_64 139/168 Running scriptlet: libverto-0.3.0-1.fc28.x86_64 139/168 Installing : krb5-libs-1.16-0.beta1.4.fc28.x86_64 140/168 Running scriptlet: krb5-libs-1.16-0.beta1.4.fc28.x86_64 140/168 Installing : cyrus-sasl-lib-2.1.26-35.fc28.x86_64 141/168 Running scriptlet: cyrus-sasl-lib-2.1.26-35.fc28.x86_64 141/168 Installing : openldap-2.4.45-4.fc28.x86_64 142/168 Running scriptlet: openldap-2.4.45-4.fc28.x86_64 142/168 Installing : gnupg2-2.2.2-2.fc28.x86_64 143/168 Running scriptlet: gnupg2-2.2.2-2.fc28.x86_64 143/168 Installing : libpkgconf-1.3.10-1.fc28.x86_64 144/168 Running scriptlet: libpkgconf-1.3.10-1.fc28.x86_64 144/168 Installing : pkgconf-1.3.10-1.fc28.x86_64 145/168 Installing : pkgconf-pkg-config-1.3.10-1.fc28.x86_64 146/168 Installing : libnghttp2-1.27.0-1.fc28.x86_64 147/168 Running scriptlet: libnghttp2-1.27.0-1.fc28.x86_64 147/168 Installing : libcurl-7.56.1-1.fc28.x86_64 148/168 Running scriptlet: libcurl-7.56.1-1.fc28.x86_64 148/168 Installing : curl-7.56.1-1.fc28.x86_64 149/168 Installing : rpm-plugin-selinux-4.14.0-5.fc28.x86_64 150/168 Installing : rpm-libs-4.14.0-5.fc28.x86_64 151/168 Running scriptlet: rpm-libs-4.14.0-5.fc28.x86_64 151/168 Installing : rpm-4.14.0-5.fc28.x86_64 152/168 Installing : rpm-build-libs-4.14.0-5.fc28.x86_64 153/168 Running scriptlet: rpm-build-libs-4.14.0-5.fc28.x86_64 153/168 Installing : rust-srpm-macros-4-3.fc27.noarch 154/168 Installing : qt5-srpm-macros-5.9.2-1.fc28.noarch 155/168 Installing : python-srpm-macros-3-23.fc28.noarch 156/168 Installing : perl-srpm-macros-1-24.fc27.noarch 157/168 Installing : openblas-srpm-macros-2-2.fc27.noarch 158/168 Installing : ocaml-srpm-macros-5-2.fc27.noarch 159/168 Installing : go-srpm-macros-2-10.fc27.noarch 160/168 Installing : gnat-srpm-macros-4-4.fc27.noarch 161/168 Installing : ghc-srpm-macros-1.4.2-6.fc27.noarch 162/168 Installing : fpc-srpm-macros-1.1-3.fc27.noarch 163/168 Installing : redhat-rpm-config-68-1.fc28.noarch 164/168 Installing : rpm-build-4.14.0-5.fc28.x86_64 165/168 Installing : util-linux-2.31-2.fc28.x86_64 166/168 Running scriptlet: util-linux-2.31-2.fc28.x86_64 166/168 Installing : gcc-c++-7.2.1-1.fc28.x86_64 167/168 Installing : which-2.21-4.fc27.x86_64 168/168 Running scriptlet: which-2.21-4.fc27.x86_64 168/168 Running scriptlet: fedora-release-28-0.1.noarch 168/168 Running scriptlet: filesystem-3.6-1.fc28.x86_64 168/168 Running scriptlet: glibc-all-langpacks-2.26.9000-27.fc28.x86_64 168/168 Running scriptlet: python3-3.6.3-3.fc28.x86_64 168/168 Running scriptlet: guile-5:2.0.14-4.fc28.x86_64 168/168 Running scriptlet: glib2-2.54.2-1.fc28.x86_64 168/168 Verifying : gawk-4.2.0-1.fc28.x86_64 1/168 Verifying : shadow-utils-2:4.5-7.fc28.x86_64 2/168 Verifying : diffutils-3.6-3.fc27.x86_64 3/168 Verifying : gzip-1.8-4.fc27.x86_64 4/168 Verifying : make-1:4.2.1-4.fc27.x86_64 5/168 Verifying : bash-4.4.12-13.fc28.x86_64 6/168 Verifying : redhat-rpm-config-68-1.fc28.noarch 7/168 Verifying : findutils-1:4.6.0-14.fc27.x86_64 8/168 Verifying : fedora-release-28-0.1.noarch 9/168 Verifying : sed-4.4-3.fc27.x86_64 10/168 Verifying : rpm-build-4.14.0-5.fc28.x86_64 11/168 Verifying : grep-3.1-3.fc27.x86_64 12/168 Verifying : which-2.21-4.fc27.x86_64 13/168 Verifying : patch-2.7.5-6.fc27.x86_64 14/168 Verifying : tar-2:1.29-7.fc27.x86_64 15/168 Verifying : info-6.5-1.fc28.x86_64 16/168 Verifying : cpio-2.12-6.fc27.x86_64 17/168 Verifying : coreutils-8.28-2.fc28.x86_64 18/168 Verifying : xz-5.2.3-5.fc28.x86_64 19/168 Verifying : bzip2-1.0.6-24.fc27.x86_64 20/168 Verifying : gcc-c++-7.2.1-1.fc28.x86_64 21/168 Verifying : util-linux-2.31-2.fc28.x86_64 22/168 Verifying : gcc-7.2.1-1.fc28.x86_64 23/168 Verifying : unzip-6.0-36.fc27.x86_64 24/168 Verifying : filesystem-3.6-1.fc28.x86_64 25/168 Verifying : glibc-2.26.9000-27.fc28.x86_64 26/168 Verifying : gmp-1:6.1.2-6.fc27.x86_64 27/168 Verifying : libsigsegv-2.11-3.fc27.x86_64 28/168 Verifying : mpfr-3.1.5-5.fc27.x86_64 29/168 Verifying : readline-7.0-7.fc27.x86_64 30/168 Verifying : audit-libs-2.8.1-1.fc28.x86_64 31/168 Verifying : libacl-2.2.52-18.fc27.x86_64 32/168 Verifying : libattr-2.4.47-21.fc27.x86_64 33/168 Verifying : libselinux-2.7-5.fc28.x86_64 34/168 Verifying : libsemanage-2.7-4.fc28.x86_64 35/168 Verifying : setup-2.11.1-1.fc28.noarch 36/168 Verifying : gc-7.6.0-7.fc27.x86_64 37/168 Verifying : guile-5:2.0.14-4.fc28.x86_64 38/168 Verifying : ncurses-libs-6.0-14.20170916.fc28.x86_64 39/168 Verifying : dwz-0.12-5.fc27.x86_64 40/168 Verifying : fpc-srpm-macros-1.1-3.fc27.noarch 41/168 Verifying : ghc-srpm-macros-1.4.2-6.fc27.noarch 42/168 Verifying : gnat-srpm-macros-4-4.fc27.noarch 43/168 Verifying : go-srpm-macros-2-10.fc27.noarch 44/168 Verifying : ocaml-srpm-macros-5-2.fc27.noarch 45/168 Verifying : openblas-srpm-macros-2-2.fc27.noarch 46/168 Verifying : perl-srpm-macros-1-24.fc27.noarch 47/168 Verifying : python-srpm-macros-3-23.fc28.noarch 48/168 Verifying : qt5-srpm-macros-5.9.2-1.fc28.noarch 49/168 Verifying : rpm-4.14.0-5.fc28.x86_64 50/168 Verifying : rust-srpm-macros-4-3.fc27.noarch 51/168 Verifying : zip-3.0-20.fc27.x86_64 52/168 Verifying : fedora-repos-28-0.3.noarch 53/168 Verifying : binutils-2.29.1-4.fc28.x86_64 54/168 Verifying : bzip2-libs-1.0.6-24.fc27.x86_64 55/168 Verifying : elfutils-0.170-1.fc27.x86_64 56/168 Verifying : elfutils-libelf-0.170-1.fc27.x86_64 57/168 Verifying : elfutils-libs-0.170-1.fc27.x86_64 58/168 Verifying : file-5.32-1.fc28.x86_64 59/168 Verifying : file-libs-5.32-1.fc28.x86_64 60/168 Verifying : gdb-headless-8.0.1-30.fc28.x86_64 61/168 Verifying : libcap-2.25-7.fc27.x86_64 62/168 Verifying : libdb-5.3.28-29.fc28.x86_64 63/168 Verifying : libzstd-1.3.2-1.fc28.x86_64 64/168 Verifying : lua-libs-5.3.4-6.fc28.x86_64 65/168 Verifying : openssl-libs-1:1.1.0g-1.fc28.x86_64 66/168 Verifying : popt-1.16-12.fc28.x86_64 67/168 Verifying : rpm-build-libs-4.14.0-5.fc28.x86_64 68/168 Verifying : rpm-libs-4.14.0-5.fc28.x86_64 69/168 Verifying : xz-libs-5.2.3-5.fc28.x86_64 70/168 Verifying : zlib-1.2.11-4.fc27.x86_64 71/168 Verifying : zstd-1.3.2-1.fc28.x86_64 72/168 Verifying : pcre-8.41-3.fc28.x86_64 73/168 Verifying : coreutils-common-8.28-2.fc28.x86_64 74/168 Verifying : ncurses-6.0-14.20170916.fc28.x86_64 75/168 Verifying : libmpc-1.0.2-8.fc27.x86_64 76/168 Verifying : libstdc++-7.2.1-1.fc28.x86_64 77/168 Verifying : libblkid-2.31-2.fc28.x86_64 78/168 Verifying : libcap-ng-0.7.8-7.fc28.x86_64 79/168 Verifying : libfdisk-2.31-2.fc28.x86_64 80/168 Verifying : libmount-2.31-2.fc28.x86_64 81/168 Verifying : libsmartcols-2.31-2.fc28.x86_64 82/168 Verifying : libutempter-1.1.6-11.fc27.x86_64 83/168 Verifying : libuuid-2.31-2.fc28.x86_64 84/168 Verifying : pam-1.3.0-6.fc28.x86_64 85/168 Verifying : systemd-libs-235-4.fc28.x86_64 86/168 Verifying : cpp-7.2.1-1.fc28.x86_64 87/168 Verifying : isl-0.16.1-4.fc28.x86_64 88/168 Verifying : libgcc-7.2.1-1.fc28.x86_64 89/168 Verifying : libgomp-7.2.1-1.fc28.x86_64 90/168 Verifying : basesystem-11-4.fc27.noarch 91/168 Verifying : glibc-common-2.26.9000-27.fc28.x86_64 92/168 Verifying : libsepol-2.7-2.fc28.x86_64 93/168 Verifying : pcre2-10.30-3.fc28.x86_64 94/168 Verifying : libatomic_ops-7.4.6-3.fc27.x86_64 95/168 Verifying : libffi-3.1-14.fc27.x86_64 96/168 Verifying : libtool-ltdl-2.4.6-20.fc27.x86_64 97/168 Verifying : libunistring-0.9.7-3.fc27.x86_64 98/168 Verifying : ncurses-base-6.0-14.20170916.fc28.noarch 99/168 Verifying : libarchive-3.3.1-3.fc27.x86_64 100/168 Verifying : libdb-utils-5.3.28-29.fc28.x86_64 101/168 Verifying : fedora-gpg-keys-28-0.3.noarch 102/168 Verifying : fedora-repos-rawhide-28-0.3.noarch 103/168 Verifying : chkconfig-1.10-3.fc27.x86_64 104/168 Verifying : elfutils-default-yama-scope-0.170-1.fc27.noarch 105/168 Verifying : expat-2.2.5-1.fc28.x86_64 106/168 Verifying : libbabeltrace-1.5.3-1.fc27.x86_64 107/168 Verifying : libipt-1.6.1-4.fc27.x86_64 108/168 Verifying : python3-libs-3.6.3-3.fc28.x86_64 109/168 Verifying : ca-certificates-2017.2.16-4.fc27.noarch 110/168 Verifying : crypto-policies-20171115-1.git921600e.fc28.noarc 111/168 Verifying : gnupg2-2.2.2-2.fc28.x86_64 112/168 Verifying : ima-evm-utils-1.0-2.fc28.x86_64 113/168 Verifying : rpm-plugin-selinux-4.14.0-5.fc28.x86_64 114/168 Verifying : cracklib-2.9.6-9.fc28.x86_64 115/168 Verifying : libgcrypt-1.8.1-1.fc28.x86_64 116/168 Verifying : lz4-libs-1.8.0-1.fc28.x86_64 117/168 Verifying : tzdata-2017c-1.fc28.noarch 118/168 Verifying : libxml2-2.9.5-2.fc28.x86_64 119/168 Verifying : glib2-2.54.2-1.fc28.x86_64 120/168 Verifying : gdbm-1.13-3.fc27.x86_64 121/168 Verifying : sqlite-libs-3.20.1-1.fc28.x86_64 122/168 Verifying : gnutls-3.6.1-2.fc28.x86_64 123/168 Verifying : libassuan-2.4.3-6.fc27.x86_64 124/168 Verifying : libgpg-error-1.27-3.fc27.x86_64 125/168 Verifying : libksba-1.3.5-5.fc27.x86_64 126/168 Verifying : libusbx-1.0.21-4.fc27.x86_64 127/168 Verifying : npth-1.5-3.fc27.x86_64 128/168 Verifying : openldap-2.4.45-4.fc28.x86_64 129/168 Verifying : compat-openssl10-1:1.0.2m-1.fc28.x86_64 130/168 Verifying : keyutils-libs-1.5.10-3.fc27.x86_64 131/168 Verifying : libidn2-2.0.4-1.fc28.x86_64 132/168 Verifying : libtasn1-4.12-3.fc27.x86_64 133/168 Verifying : nettle-3.4-1.fc28.x86_64 134/168 Verifying : p11-kit-0.23.9-2.fc28.x86_64 135/168 Verifying : cyrus-sasl-lib-2.1.26-35.fc28.x86_64 136/168 Verifying : nspr-4.17.0-1.fc28.x86_64 137/168 Verifying : nss-3.34.0-2.fc28.x86_64 138/168 Verifying : nss-util-3.34.0-2.fc28.x86_64 139/168 Verifying : krb5-libs-1.16-0.beta1.4.fc28.x86_64 140/168 Verifying : libcom_err-1.43.7-1.fc28.x86_64 141/168 Verifying : nss-pem-1.0.3-6.fc28.x86_64 142/168 Verifying : nss-softokn-3.34.0-2.fc28.x86_64 143/168 Verifying : nss-sysinit-3.34.0-2.fc28.x86_64 144/168 Verifying : libverto-0.3.0-1.fc28.x86_64 145/168 Verifying : nss-softokn-freebl-3.34.0-2.fc28.x86_64 146/168 Verifying : pkgconf-pkg-config-1.3.10-1.fc28.x86_64 147/168 Verifying : pkgconf-1.3.10-1.fc28.x86_64 148/168 Verifying : pkgconf-m4-1.3.10-1.fc28.noarch 149/168 Verifying : libpkgconf-1.3.10-1.fc28.x86_64 150/168 Verifying : python3-3.6.3-3.fc28.x86_64 151/168 Verifying : python3-pip-9.0.1-11.fc27.noarch 152/168 Verifying : python3-setuptools-36.2.0-8.fc28.noarch 153/168 Verifying : libpwquality-1.4.0-3.fc27.x86_64 154/168 Verifying : p11-kit-trust-0.23.9-2.fc28.x86_64 155/168 Verifying : libstdc++-devel-7.2.1-1.fc28.x86_64 156/168 Verifying : glibc-devel-2.26.9000-27.fc28.x86_64 157/168 Verifying : glibc-headers-2.26.9000-27.fc28.x86_64 158/168 Verifying : kernel-headers-4.15.0-0.rc0.git6.1.fc28.x86_64 159/168 Verifying : libcrypt-nss-2.26.9000-27.fc28.x86_64 160/168 Verifying : curl-7.56.1-1.fc28.x86_64 161/168 Verifying : libmetalink-0.1.3-4.fc27.x86_64 162/168 Verifying : glibc-all-langpacks-2.26.9000-27.fc28.x86_64 163/168 Verifying : libcurl-7.56.1-1.fc28.x86_64 164/168 Verifying : libnghttp2-1.27.0-1.fc28.x86_64 165/168 Verifying : libpsl-0.19.1-1.fc28.x86_64 166/168 Verifying : libssh2-1.8.0-5.fc28.x86_64 167/168 Verifying : publicsuffix-list-dafsa-20171028-1.fc28.noarch 168/168 Installed: bash.x86_64 4.4.12-13.fc28 bzip2.x86_64 1.0.6-24.fc27 coreutils.x86_64 8.28-2.fc28 cpio.x86_64 2.12-6.fc27 diffutils.x86_64 3.6-3.fc27 fedora-release.noarch 28-0.1 findutils.x86_64 1:4.6.0-14.fc27 gawk.x86_64 4.2.0-1.fc28 gcc.x86_64 7.2.1-1.fc28 gcc-c++.x86_64 7.2.1-1.fc28 grep.x86_64 3.1-3.fc27 gzip.x86_64 1.8-4.fc27 info.x86_64 6.5-1.fc28 make.x86_64 1:4.2.1-4.fc27 patch.x86_64 2.7.5-6.fc27 redhat-rpm-config.noarch 68-1.fc28 rpm-build.x86_64 4.14.0-5.fc28 sed.x86_64 4.4-3.fc27 shadow-utils.x86_64 2:4.5-7.fc28 tar.x86_64 2:1.29-7.fc27 unzip.x86_64 6.0-36.fc27 util-linux.x86_64 2.31-2.fc28 which.x86_64 2.21-4.fc27 xz.x86_64 5.2.3-5.fc28 audit-libs.x86_64 2.8.1-1.fc28 basesystem.noarch 11-4.fc27 binutils.x86_64 2.29.1-4.fc28 bzip2-libs.x86_64 1.0.6-24.fc27 ca-certificates.noarch 2017.2.16-4.fc27 chkconfig.x86_64 1.10-3.fc27 compat-openssl10.x86_64 1:1.0.2m-1.fc28 coreutils-common.x86_64 8.28-2.fc28 cpp.x86_64 7.2.1-1.fc28 cracklib.x86_64 2.9.6-9.fc28 crypto-policies.noarch 20171115-1.git921600e.fc28 curl.x86_64 7.56.1-1.fc28 cyrus-sasl-lib.x86_64 2.1.26-35.fc28 dwz.x86_64 0.12-5.fc27 elfutils.x86_64 0.170-1.fc27 elfutils-default-yama-scope.noarch 0.170-1.fc27 elfutils-libelf.x86_64 0.170-1.fc27 elfutils-libs.x86_64 0.170-1.fc27 expat.x86_64 2.2.5-1.fc28 fedora-gpg-keys.noarch 28-0.3 fedora-repos.noarch 28-0.3 fedora-repos-rawhide.noarch 28-0.3 file.x86_64 5.32-1.fc28 file-libs.x86_64 5.32-1.fc28 filesystem.x86_64 3.6-1.fc28 fpc-srpm-macros.noarch 1.1-3.fc27 gc.x86_64 7.6.0-7.fc27 gdb-headless.x86_64 8.0.1-30.fc28 gdbm.x86_64 1.13-3.fc27 ghc-srpm-macros.noarch 1.4.2-6.fc27 glib2.x86_64 2.54.2-1.fc28 glibc.x86_64 2.26.9000-27.fc28 glibc-all-langpacks.x86_64 2.26.9000-27.fc28 glibc-common.x86_64 2.26.9000-27.fc28 glibc-devel.x86_64 2.26.9000-27.fc28 glibc-headers.x86_64 2.26.9000-27.fc28 gmp.x86_64 1:6.1.2-6.fc27 gnat-srpm-macros.noarch 4-4.fc27 gnupg2.x86_64 2.2.2-2.fc28 gnutls.x86_64 3.6.1-2.fc28 go-srpm-macros.noarch 2-10.fc27 guile.x86_64 5:2.0.14-4.fc28 ima-evm-utils.x86_64 1.0-2.fc28 isl.x86_64 0.16.1-4.fc28 kernel-headers.x86_64 4.15.0-0.rc0.git6.1.fc28 keyutils-libs.x86_64 1.5.10-3.fc27 krb5-libs.x86_64 1.16-0.beta1.4.fc28 libacl.x86_64 2.2.52-18.fc27 libarchive.x86_64 3.3.1-3.fc27 libassuan.x86_64 2.4.3-6.fc27 libatomic_ops.x86_64 7.4.6-3.fc27 libattr.x86_64 2.4.47-21.fc27 libbabeltrace.x86_64 1.5.3-1.fc27 libblkid.x86_64 2.31-2.fc28 libcap.x86_64 2.25-7.fc27 libcap-ng.x86_64 0.7.8-7.fc28 libcom_err.x86_64 1.43.7-1.fc28 libcrypt-nss.x86_64 2.26.9000-27.fc28 libcurl.x86_64 7.56.1-1.fc28 libdb.x86_64 5.3.28-29.fc28 libdb-utils.x86_64 5.3.28-29.fc28 libfdisk.x86_64 2.31-2.fc28 libffi.x86_64 3.1-14.fc27 libgcc.x86_64 7.2.1-1.fc28 libgcrypt.x86_64 1.8.1-1.fc28 libgomp.x86_64 7.2.1-1.fc28 libgpg-error.x86_64 1.27-3.fc27 libidn2.x86_64 2.0.4-1.fc28 libipt.x86_64 1.6.1-4.fc27 libksba.x86_64 1.3.5-5.fc27 libmetalink.x86_64 0.1.3-4.fc27 libmount.x86_64 2.31-2.fc28 libmpc.x86_64 1.0.2-8.fc27 libnghttp2.x86_64 1.27.0-1.fc28 libpkgconf.x86_64 1.3.10-1.fc28 libpsl.x86_64 0.19.1-1.fc28 libpwquality.x86_64 1.4.0-3.fc27 libselinux.x86_64 2.7-5.fc28 libsemanage.x86_64 2.7-4.fc28 libsepol.x86_64 2.7-2.fc28 libsigsegv.x86_64 2.11-3.fc27 libsmartcols.x86_64 2.31-2.fc28 libssh2.x86_64 1.8.0-5.fc28 libstdc++.x86_64 7.2.1-1.fc28 libstdc++-devel.x86_64 7.2.1-1.fc28 libtasn1.x86_64 4.12-3.fc27 libtool-ltdl.x86_64 2.4.6-20.fc27 libunistring.x86_64 0.9.7-3.fc27 libusbx.x86_64 1.0.21-4.fc27 libutempter.x86_64 1.1.6-11.fc27 libuuid.x86_64 2.31-2.fc28 libverto.x86_64 0.3.0-1.fc28 libxml2.x86_64 2.9.5-2.fc28 libzstd.x86_64 1.3.2-1.fc28 lua-libs.x86_64 5.3.4-6.fc28 lz4-libs.x86_64 1.8.0-1.fc28 mpfr.x86_64 3.1.5-5.fc27 ncurses.x86_64 6.0-14.20170916.fc28 ncurses-base.noarch 6.0-14.20170916.fc28 ncurses-libs.x86_64 6.0-14.20170916.fc28 nettle.x86_64 3.4-1.fc28 npth.x86_64 1.5-3.fc27 nspr.x86_64 4.17.0-1.fc28 nss.x86_64 3.34.0-2.fc28 nss-pem.x86_64 1.0.3-6.fc28 nss-softokn.x86_64 3.34.0-2.fc28 nss-softokn-freebl.x86_64 3.34.0-2.fc28 nss-sysinit.x86_64 3.34.0-2.fc28 nss-util.x86_64 3.34.0-2.fc28 ocaml-srpm-macros.noarch 5-2.fc27 openblas-srpm-macros.noarch 2-2.fc27 openldap.x86_64 2.4.45-4.fc28 openssl-libs.x86_64 1:1.1.0g-1.fc28 p11-kit.x86_64 0.23.9-2.fc28 p11-kit-trust.x86_64 0.23.9-2.fc28 pam.x86_64 1.3.0-6.fc28 pcre.x86_64 8.41-3.fc28 pcre2.x86_64 10.30-3.fc28 perl-srpm-macros.noarch 1-24.fc27 pkgconf.x86_64 1.3.10-1.fc28 pkgconf-m4.noarch 1.3.10-1.fc28 pkgconf-pkg-config.x86_64 1.3.10-1.fc28 popt.x86_64 1.16-12.fc28 publicsuffix-list-dafsa.noarch 20171028-1.fc28 python-srpm-macros.noarch 3-23.fc28 python3.x86_64 3.6.3-3.fc28 python3-libs.x86_64 3.6.3-3.fc28 python3-pip.noarch 9.0.1-11.fc27 python3-setuptools.noarch 36.2.0-8.fc28 qt5-srpm-macros.noarch 5.9.2-1.fc28 readline.x86_64 7.0-7.fc27 rpm.x86_64 4.14.0-5.fc28 rpm-build-libs.x86_64 4.14.0-5.fc28 rpm-libs.x86_64 4.14.0-5.fc28 rpm-plugin-selinux.x86_64 4.14.0-5.fc28 rust-srpm-macros.noarch 4-3.fc27 setup.noarch 2.11.1-1.fc28 sqlite-libs.x86_64 3.20.1-1.fc28 systemd-libs.x86_64 235-4.fc28 tzdata.noarch 2017c-1.fc28 xz-libs.x86_64 5.2.3-5.fc28 zip.x86_64 3.0-20.fc27 zlib.x86_64 1.2.11-4.fc27 zstd.x86_64 1.3.2-1.fc28 Complete! Finish: dnf install Start: creating root cache Finish: creating root cache Finish: chroot init INFO: Installed packages: Start: buildsrpm Start: rpmbuild -bs Building target platforms: x86_64 Building for target x86_64 Wrote: /builddir/build/SRPMS/libjaylink-0.1.0-1.fc28.src.rpm Finish: rpmbuild -bs Finish: buildsrpm INFO: Done(/tmp/tmpgmuwocej/libjaylink.spec) Config(child) 2 minutes 6 seconds INFO: Results and/or logs in: /var/lib/copr-rpmbuild/results INFO: Cleaning up build root ('cleanup_on_success=True') Start: clean chroot INFO: unmounting tmpfs. INFO: unmounting tmpfs. Finish: clean chroot Finish: run Running: unbuffer /usr/bin/mock --rebuild /var/lib/copr-rpmbuild/results/libjaylink-0.1.0-1.fc28.src.rpm --configdir /var/lib/copr-rpmbuild/results/configs --resultdir /var/lib/copr-rpmbuild/results --uniqueext 1511428811.979778 -r child WARNING: Could not find required logging config file: /var/lib/copr-rpmbuild/results/configs/logging.ini. Using default... INFO: mock.py version 1.4.4 starting (python version = 3.6.3)... Start(bootstrap): init plugins INFO: tmpfs initialized INFO: selinux enabled INFO: compress_logs: initialized Finish(bootstrap): init plugins Start: init plugins INFO: tmpfs initialized INFO: selinux enabled INFO: compress_logs: initialized Finish: init plugins Start: run INFO: Start(/var/lib/copr-rpmbuild/results/libjaylink-0.1.0-1.fc28.src.rpm) Config(678698-fedora-rawhide-x86_64) Start: clean chroot Finish: clean chroot Start(bootstrap): chroot init INFO: mounting tmpfs at /var/lib/mock/678698-fedora-rawhide-x86_64-bootstrap-1511428811.979778/root. INFO: calling preinit hooks INFO: enabled root cache Start(bootstrap): unpacking root cache Finish(bootstrap): unpacking root cache INFO: enabled HW Info plugin Mock Version: 1.4.4 INFO: Mock Version: 1.4.4 Start(bootstrap): dnf update fedora 55 MB/s | 59 MB 00:01 Failed to synchronize cache for repo 'copr_base', disabling. Last metadata expiration check: 0:00:22 ago on Thu 23 Nov 2017 09:20:16 AM UTC. Dependencies resolved. Nothing to do. Complete! Finish(bootstrap): dnf update Finish(bootstrap): chroot init Start: chroot init INFO: mounting tmpfs at /var/lib/mock/678698-fedora-rawhide-x86_64-1511428811.979778/root. INFO: calling preinit hooks INFO: enabled root cache Start: unpacking root cache Finish: unpacking root cache INFO: enabled HW Info plugin Mock Version: 1.4.4 INFO: Mock Version: 1.4.4 Start: dnf update fedora 53 MB/s | 59 MB 00:01 Failed to synchronize cache for repo 'copr_base', disabling. Last metadata expiration check: 0:00:22 ago on Thu 23 Nov 2017 09:20:46 AM UTC. Dependencies resolved. Nothing to do. Complete! Finish: dnf update Finish: chroot init Start: build phase for libjaylink-0.1.0-1.fc28.src.rpm Start: build setup for libjaylink-0.1.0-1.fc28.src.rpm Building target platforms: x86_64 Building for target x86_64 Wrote: /builddir/build/SRPMS/libjaylink-0.1.0-1.fc28.src.rpm Failed to synchronize cache for repo 'copr_base', disabling. Last metadata expiration check: 0:00:00 ago on Thu 23 Nov 2017 09:21:12 AM UTC. Package gcc-7.2.1-1.fc28.x86_64 is already installed, skipping. Package pkgconf-pkg-config-1.3.10-1.fc28.x86_64 is already installed, skipping. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: autoconf noarch 2.69-26.fc28 fedora 709 k automake noarch 1.15.1-3.fc28 fedora 706 k libtool x86_64 2.4.6-20.fc27 fedora 706 k libusbx-devel x86_64 1.0.21-4.fc27 fedora 27 k Installing dependencies: emacs-filesystem noarch 1:25.3-3.fc28 fedora 67 k groff-base x86_64 1.22.3-11.fc27 fedora 1.0 M m4 x86_64 1.4.18-5.fc27 fedora 219 k perl-Carp noarch 1.42-394.fc27 fedora 28 k perl-Data-Dumper x86_64 2.167-396.fc27 fedora 56 k perl-Encode x86_64 4:2.93-15.fc28 fedora 1.5 M perl-Errno x86_64 1.28-401.fc28 fedora 71 k perl-Exporter noarch 5.72-395.fc27 fedora 32 k perl-File-Path noarch 2.15-1.fc27 fedora 37 k perl-File-Temp noarch 0.230.400-394.fc27 fedora 61 k perl-Getopt-Long noarch 1:2.50-3.fc27 fedora 61 k perl-HTTP-Tiny noarch 0.070-394.fc27 fedora 56 k perl-IO x86_64 1.38-401.fc28 fedora 136 k perl-MIME-Base64 x86_64 3.15-395.fc27 fedora 29 k perl-PathTools x86_64 3.67-395.fc27 fedora 88 k perl-Pod-Escapes noarch 1:1.07-394.fc27 fedora 19 k perl-Pod-Perldoc noarch 3.28-395.fc27 fedora 87 k perl-Pod-Simple noarch 1:3.35-394.fc27 fedora 211 k perl-Pod-Usage noarch 4:1.69-394.fc27 fedora 33 k perl-Scalar-List-Utils x86_64 3:1.49-1.fc28 fedora 66 k perl-Socket x86_64 4:2.024-5.fc27 fedora 56 k perl-Storable x86_64 1:2.62-395.fc27 fedora 84 k perl-Term-ANSIColor noarch 4.06-395.fc27 fedora 44 k perl-Term-Cap noarch 1.17-394.fc27 fedora 21 k perl-Text-ParseWords noarch 3.30-394.fc27 fedora 16 k perl-Text-Tabs+Wrap noarch 2013.0523-394.fc27 fedora 23 k perl-Thread-Queue noarch 3.12-394.fc27 fedora 22 k perl-Time-Local noarch 1:1.250-394.fc27 fedora 30 k perl-Unicode-Normalize x86_64 1.25-395.fc27 fedora 80 k perl-constant noarch 1.33-395.fc27 fedora 24 k perl-interpreter x86_64 4:5.26.1-401.fc28 fedora 6.2 M perl-libs x86_64 4:5.26.1-401.fc28 fedora 1.5 M perl-macros x86_64 4:5.26.1-401.fc28 fedora 67 k perl-parent noarch 1:0.236-394.fc27 fedora 18 k perl-podlators noarch 4.09-394.fc27 fedora 114 k perl-threads x86_64 1:2.16-4.fc27 fedora 59 k perl-threads-shared x86_64 1.57-4.fc27 fedora 46 k Transaction Summary ================================================================================ Install 41 Packages Total download size: 14 M Installed size: 43 M Downloading Packages: (1/41): autoconf-2.69-26.fc28.noarch.rpm 649 kB/s | 709 kB 00:01 (2/41): automake-1.15.1-3.fc28.noarch.rpm 633 kB/s | 706 kB 00:01 (3/41): libtool-2.4.6-20.fc27.x86_64.rpm 566 kB/s | 706 kB 00:01 (4/41): libusbx-devel-1.0.21-4.fc27.x86_64.rpm 26 kB/s | 27 kB 00:01 (5/41): emacs-filesystem-25.3-3.fc28.noarch.rpm 24 kB/s | 67 kB 00:02 (6/41): m4-1.4.18-5.fc27.x86_64.rpm 59 kB/s | 219 kB 00:03 (7/41): perl-Carp-1.42-394.fc27.noarch.rpm 8.0 kB/s | 28 kB 00:03 (8/41): perl-Data-Dumper-2.167-396.fc27.x86_64. 28 kB/s | 56 kB 00:02 (9/41): perl-Errno-1.28-401.fc28.x86_64.rpm 41 kB/s | 71 kB 00:01 (10/41): perl-Exporter-5.72-395.fc27.noarch.rpm 18 kB/s | 32 kB 00:01 (11/41): perl-File-Path-2.15-1.fc27.noarch.rpm 15 kB/s | 37 kB 00:02 (12/41): perl-Getopt-Long-2.50-3.fc27.noarch.rp 14 kB/s | 61 kB 00:04 (13/41): perl-IO-1.38-401.fc28.x86_64.rpm 29 kB/s | 136 kB 00:04 (14/41): perl-PathTools-3.67-395.fc27.x86_64.rp 22 kB/s | 88 kB 00:04 (15/41): perl-Text-ParseWords-3.30-394.fc27.noa 8.2 kB/s | 16 kB 00:02 (16/41): perl-constant-1.33-395.fc27.noarch.rpm 13 kB/s | 24 kB 00:01 (17/41): perl-Thread-Queue-3.12-394.fc27.noarch 6.3 kB/s | 22 kB 00:03 (18/41): perl-threads-2.16-4.fc27.x86_64.rpm 20 kB/s | 59 kB 00:02 (19/41): perl-interpreter-5.26.1-401.fc28.x86_6 1.4 MB/s | 6.2 MB 00:04 (20/41): perl-Scalar-List-Utils-1.49-1.fc28.x86 113 kB/s | 66 kB 00:00 (21/41): perl-libs-5.26.1-401.fc28.x86_64.rpm 1.5 MB/s | 1.5 MB 00:01 (22/41): perl-Pod-Usage-1.69-394.fc27.noarch.rp 17 kB/s | 33 kB 00:01 (23/41): perl-Socket-2.024-5.fc27.x86_64.rpm 31 kB/s | 56 kB 00:01 (24/41): perl-Text-Tabs+Wrap-2013.0523-394.fc27 17 kB/s | 23 kB 00:01 (25/41): perl-Unicode-Normalize-1.25-395.fc27.x 562 kB/s | 80 kB 00:00 (26/41): perl-parent-0.236-394.fc27.noarch.rpm 1.2 MB/s | 18 kB 00:00 (27/41): perl-macros-5.26.1-401.fc28.x86_64.rpm 599 kB/s | 67 kB 00:00 (28/41): perl-threads-shared-1.57-4.fc27.x86_64 1.3 MB/s | 46 kB 00:00 (29/41): perl-Pod-Perldoc-3.28-395.fc27.noarch. 2.2 MB/s | 87 kB 00:00 (30/41): perl-podlators-4.09-394.fc27.noarch.rp 496 kB/s | 114 kB 00:00 (31/41): groff-base-1.22.3-11.fc27.x86_64.rpm 1.0 MB/s | 1.0 MB 00:01 (32/41): perl-File-Temp-0.230.400-394.fc27.noar 26 kB/s | 61 kB 00:02 (33/41): perl-HTTP-Tiny-0.070-394.fc27.noarch.r 23 kB/s | 56 kB 00:02 (34/41): perl-Pod-Simple-3.35-394.fc27.noarch.r 105 kB/s | 211 kB 00:02 (35/41): perl-Term-ANSIColor-4.06-395.fc27.noar 23 kB/s | 44 kB 00:01 (36/41): perl-Term-Cap-1.17-394.fc27.noarch.rpm 6.5 kB/s | 21 kB 00:03 (37/41): perl-MIME-Base64-3.15-395.fc27.x86_64. 9.6 kB/s | 29 kB 00:03 (38/41): perl-Time-Local-1.250-394.fc27.noarch. 8.6 kB/s | 30 kB 00:03 (39/41): perl-Pod-Escapes-1.07-394.fc27.noarch. 5.1 kB/s | 19 kB 00:03 (40/41): perl-Encode-2.93-15.fc28.x86_64.rpm 344 kB/s | 1.5 MB 00:04 (41/41): perl-Storable-2.62-395.fc27.x86_64.rpm 25 kB/s | 84 kB 00:03 -------------------------------------------------------------------------------- Total 480 kB/s | 14 MB 00:30 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : 1/1 Installing : perl-Exporter-5.72-395.fc27.noarch 1/41 Installing : perl-libs-4:5.26.1-401.fc28.x86_64 2/41 Running scriptlet: perl-libs-4:5.26.1-401.fc28.x86_64 2/41 Installing : perl-Carp-1.42-394.fc27.noarch 3/41 Installing : perl-Scalar-List-Utils-3:1.49-1.fc28.x86_64 4/41 Installing : perl-Text-ParseWords-3.30-394.fc27.noarch 5/41 Installing : perl-macros-4:5.26.1-401.fc28.x86_64 6/41 Installing : perl-Errno-1.28-401.fc28.x86_64 7/41 Installing : perl-File-Path-2.15-1.fc27.noarch 8/41 Installing : perl-PathTools-3.67-395.fc27.x86_64 9/41 Installing : perl-constant-1.33-395.fc27.noarch 10/41 Installing : perl-threads-1:2.16-4.fc27.x86_64 11/41 Installing : perl-threads-shared-1.57-4.fc27.x86_64 12/41 Installing : perl-IO-1.38-401.fc28.x86_64 13/41 Installing : perl-Socket-4:2.024-5.fc27.x86_64 14/41 Installing : perl-Text-Tabs+Wrap-2013.0523-394.fc27.noarch 15/41 Installing : perl-Unicode-Normalize-1.25-395.fc27.x86_64 16/41 Installing : perl-parent-1:0.236-394.fc27.noarch 17/41 Installing : perl-interpreter-4:5.26.1-401.fc28.x86_64 18/41 Installing : perl-MIME-Base64-3.15-395.fc27.x86_64 19/41 Installing : perl-Data-Dumper-2.167-396.fc27.x86_64 20/41 Installing : perl-File-Temp-0.230.400-394.fc27.noarch 21/41 Installing : perl-Term-Cap-1.17-394.fc27.noarch 22/41 Installing : perl-Pod-Escapes-1:1.07-394.fc27.noarch 23/41 Installing : perl-Storable-1:2.62-395.fc27.x86_64 24/41 Installing : perl-Time-Local-1:1.250-394.fc27.noarch 25/41 Installing : perl-HTTP-Tiny-0.070-394.fc27.noarch 26/41 Installing : perl-Thread-Queue-3.12-394.fc27.noarch 27/41 Installing : perl-Term-ANSIColor-4.06-395.fc27.noarch 28/41 Installing : groff-base-1.22.3-11.fc27.x86_64 29/41 Installing : perl-Getopt-Long-1:2.50-3.fc27.noarch 30/41 Installing : perl-Encode-4:2.93-15.fc28.x86_64 31/41 Installing : perl-Pod-Simple-1:3.35-394.fc27.noarch 32/41 Installing : perl-Pod-Usage-4:1.69-394.fc27.noarch 33/41 Installing : perl-podlators-4.09-394.fc27.noarch 34/41 Installing : perl-Pod-Perldoc-3.28-395.fc27.noarch 35/41 Installing : m4-1.4.18-5.fc27.x86_64 36/41 Running scriptlet: m4-1.4.18-5.fc27.x86_64 36/41 Installing : emacs-filesystem-1:25.3-3.fc28.noarch 37/41 Installing : autoconf-2.69-26.fc28.noarch 38/41 Running scriptlet: autoconf-2.69-26.fc28.noarch 38/41 Installing : automake-1.15.1-3.fc28.noarch 39/41 Running scriptlet: automake-1.15.1-3.fc28.noarch 39/41 Installing : libtool-2.4.6-20.fc27.x86_64 40/41 Running scriptlet: libtool-2.4.6-20.fc27.x86_64 40/41 Installing : libusbx-devel-1.0.21-4.fc27.x86_64 41/41 Verifying : autoconf-2.69-26.fc28.noarch 1/41 Verifying : automake-1.15.1-3.fc28.noarch 2/41 Verifying : libtool-2.4.6-20.fc27.x86_64 3/41 Verifying : libusbx-devel-1.0.21-4.fc27.x86_64 4/41 Verifying : emacs-filesystem-1:25.3-3.fc28.noarch 5/41 Verifying : m4-1.4.18-5.fc27.x86_64 6/41 Verifying : perl-Carp-1.42-394.fc27.noarch 7/41 Verifying : perl-Data-Dumper-2.167-396.fc27.x86_64 8/41 Verifying : perl-Errno-1.28-401.fc28.x86_64 9/41 Verifying : perl-Exporter-5.72-395.fc27.noarch 10/41 Verifying : perl-File-Path-2.15-1.fc27.noarch 11/41 Verifying : perl-Getopt-Long-1:2.50-3.fc27.noarch 12/41 Verifying : perl-IO-1.38-401.fc28.x86_64 13/41 Verifying : perl-PathTools-3.67-395.fc27.x86_64 14/41 Verifying : perl-Text-ParseWords-3.30-394.fc27.noarch 15/41 Verifying : perl-constant-1.33-395.fc27.noarch 16/41 Verifying : perl-interpreter-4:5.26.1-401.fc28.x86_64 17/41 Verifying : perl-Thread-Queue-3.12-394.fc27.noarch 18/41 Verifying : perl-threads-1:2.16-4.fc27.x86_64 19/41 Verifying : perl-Scalar-List-Utils-3:1.49-1.fc28.x86_64 20/41 Verifying : perl-libs-4:5.26.1-401.fc28.x86_64 21/41 Verifying : perl-Pod-Usage-4:1.69-394.fc27.noarch 22/41 Verifying : perl-Socket-4:2.024-5.fc27.x86_64 23/41 Verifying : perl-Text-Tabs+Wrap-2013.0523-394.fc27.noarch 24/41 Verifying : perl-Unicode-Normalize-1.25-395.fc27.x86_64 25/41 Verifying : perl-macros-4:5.26.1-401.fc28.x86_64 26/41 Verifying : perl-parent-1:0.236-394.fc27.noarch 27/41 Verifying : perl-threads-shared-1.57-4.fc27.x86_64 28/41 Verifying : perl-Pod-Perldoc-3.28-395.fc27.noarch 29/41 Verifying : perl-podlators-4.09-394.fc27.noarch 30/41 Verifying : groff-base-1.22.3-11.fc27.x86_64 31/41 Verifying : perl-File-Temp-0.230.400-394.fc27.noarch 32/41 Verifying : perl-HTTP-Tiny-0.070-394.fc27.noarch 33/41 Verifying : perl-Pod-Simple-1:3.35-394.fc27.noarch 34/41 Verifying : perl-Term-ANSIColor-4.06-395.fc27.noarch 35/41 Verifying : perl-Term-Cap-1.17-394.fc27.noarch 36/41 Verifying : perl-MIME-Base64-3.15-395.fc27.x86_64 37/41 Verifying : perl-Time-Local-1:1.250-394.fc27.noarch 38/41 Verifying : perl-Pod-Escapes-1:1.07-394.fc27.noarch 39/41 Verifying : perl-Encode-4:2.93-15.fc28.x86_64 40/41 Verifying : perl-Storable-1:2.62-395.fc27.x86_64 41/41 Installed: autoconf.noarch 2.69-26.fc28 automake.noarch 1.15.1-3.fc28 libtool.x86_64 2.4.6-20.fc27 libusbx-devel.x86_64 1.0.21-4.fc27 emacs-filesystem.noarch 1:25.3-3.fc28 groff-base.x86_64 1.22.3-11.fc27 m4.x86_64 1.4.18-5.fc27 perl-Carp.noarch 1.42-394.fc27 perl-Data-Dumper.x86_64 2.167-396.fc27 perl-Encode.x86_64 4:2.93-15.fc28 perl-Errno.x86_64 1.28-401.fc28 perl-Exporter.noarch 5.72-395.fc27 perl-File-Path.noarch 2.15-1.fc27 perl-File-Temp.noarch 0.230.400-394.fc27 perl-Getopt-Long.noarch 1:2.50-3.fc27 perl-HTTP-Tiny.noarch 0.070-394.fc27 perl-IO.x86_64 1.38-401.fc28 perl-MIME-Base64.x86_64 3.15-395.fc27 perl-PathTools.x86_64 3.67-395.fc27 perl-Pod-Escapes.noarch 1:1.07-394.fc27 perl-Pod-Perldoc.noarch 3.28-395.fc27 perl-Pod-Simple.noarch 1:3.35-394.fc27 perl-Pod-Usage.noarch 4:1.69-394.fc27 perl-Scalar-List-Utils.x86_64 3:1.49-1.fc28 perl-Socket.x86_64 4:2.024-5.fc27 perl-Storable.x86_64 1:2.62-395.fc27 perl-Term-ANSIColor.noarch 4.06-395.fc27 perl-Term-Cap.noarch 1.17-394.fc27 perl-Text-ParseWords.noarch 3.30-394.fc27 perl-Text-Tabs+Wrap.noarch 2013.0523-394.fc27 perl-Thread-Queue.noarch 3.12-394.fc27 perl-Time-Local.noarch 1:1.250-394.fc27 perl-Unicode-Normalize.x86_64 1.25-395.fc27 perl-constant.noarch 1.33-395.fc27 perl-interpreter.x86_64 4:5.26.1-401.fc28 perl-libs.x86_64 4:5.26.1-401.fc28 perl-macros.x86_64 4:5.26.1-401.fc28 perl-parent.noarch 1:0.236-394.fc27 perl-podlators.noarch 4.09-394.fc27 perl-threads.x86_64 1:2.16-4.fc27 perl-threads-shared.x86_64 1.57-4.fc27 Complete! Finish: build setup for libjaylink-0.1.0-1.fc28.src.rpm Start: rpmbuild libjaylink-0.1.0-1.fc28.src.rpm Building target platforms: x86_64 Building for target x86_64 Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.dhBTgd + umask 022 + cd /builddir/build/BUILD + cd /builddir/build/BUILD + rm -rf libjaylink-0.1.0 + /usr/bin/gzip -dc /builddir/build/SOURCES/libjaylink-0.1.0.tar.gz + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd libjaylink-0.1.0 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.ldeoTs + umask 022 + cd /builddir/build/BUILD + cd libjaylink-0.1.0 + CFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic -I/usr/lib64/gfortran/modules' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic -I/usr/lib64/gfortran/modules' + export FCFLAGS + LDFLAGS='-Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + '[' 1 = 1 ']' +++ dirname ./configure ++ find . -name config.guess -o -name config.sub + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./build-aux/config.guess + '[' -f /usr/lib/rpm/redhat/config.guess ']' + /usr/bin/rm -f ./build-aux/config.guess ++ basename ./build-aux/config.guess + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.guess ./build-aux/config.guess '/usr/lib/rpm/redhat/config.guess' -> './build-aux/config.guess' + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./build-aux/config.sub + '[' -f /usr/lib/rpm/redhat/config.sub ']' + /usr/bin/rm -f ./build-aux/config.sub ++ basename ./build-aux/config.sub + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.sub ./build-aux/config.sub '/usr/lib/rpm/redhat/config.sub' -> './build-aux/config.sub' + '[' 1 = 1 ']' + '[' x '!=' x-specs=/usr/lib/rpm/redhat/redhat-hardened-ld ']' ++ find . -name ltmain.sh + for i in $(find . -name ltmain.sh) + /usr/bin/sed -i.backup -e 's~compiler_flags=$~compiler_flags="-specs=/usr/lib/rpm/redhat/redhat-hardened-ld"~' ./build-aux/ltmain.sh + ./configure --build=x86_64-redhat-linux-gnu --host=x86_64-redhat-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static checking build system type... x86_64-redhat-linux-gnu checking host system type... x86_64-redhat-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for x86_64-redhat-linux-gnu-gcc... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... none checking for x86_64-redhat-linux-gnu-ar... no checking for x86_64-redhat-linux-gnu-lib... no checking for x86_64-redhat-linux-gnu-link... no checking for ar... ar checking the archiver (ar) interface... ar checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert x86_64-redhat-linux-gnu file names to x86_64-redhat-linux-gnu format... func_convert_file_noop checking how to convert x86_64-redhat-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for x86_64-redhat-linux-gnu-objdump... no checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for x86_64-redhat-linux-gnu-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for x86_64-redhat-linux-gnu-ar... ar checking for archiver @FILE support... @ checking for x86_64-redhat-linux-gnu-strip... no checking for strip... strip checking for x86_64-redhat-linux-gnu-ranlib... no checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for x86_64-redhat-linux-gnu-mt... no checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for x86_64-redhat-linux-gnu-pkg-config... /usr/bin/x86_64-redhat-linux-gnu-pkg-config checking pkg-config is at least version 0.9.0... yes checking for libusb... yes checking whether byte ordering is bigendian... no checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating libjaylink/Makefile config.status: creating libjaylink/version.h config.status: creating libjaylink.pc config.status: creating Doxyfile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands libjaylink configuration summary: - Package version ................ 0.1.0 - Library version ................ 0:0:0 - Installation prefix ............ /usr - Building on .................... x86_64-redhat-linux-gnu - Building for ................... x86_64-redhat-linux-gnu + /usr/bin/make -O -j2 /usr/bin/make all-recursive Making all in libjaylink make[2]: Entering directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' /bin/sh ../libtool --tag=CC --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wextra -Werror -fvisibility=hidden -I/usr/include/libusb-1.0 -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic -c -o libjaylink_la-buffer.lo `test -f 'buffer.c' || echo './'`buffer.c make[2]: Leaving directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' make[2]: Entering directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' /bin/sh ../libtool --tag=CC --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wextra -Werror -fvisibility=hidden -I/usr/include/libusb-1.0 -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic -c -o libjaylink_la-core.lo `test -f 'core.c' || echo './'`core.c make[2]: Leaving directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' make[2]: Entering directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' /bin/sh ../libtool --tag=CC --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wextra -Werror -fvisibility=hidden -I/usr/include/libusb-1.0 -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic -c -o libjaylink_la-discovery.lo `test -f 'discovery.c' || echo './'`discovery.c make[2]: Leaving directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' make[2]: Entering directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' /bin/sh ../libtool --tag=CC --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wextra -Werror -fvisibility=hidden -I/usr/include/libusb-1.0 -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic -c -o libjaylink_la-emucom.lo `test -f 'emucom.c' || echo './'`emucom.c make[2]: Leaving directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' make[2]: Entering directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' /bin/sh ../libtool --tag=CC --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wextra -Werror -fvisibility=hidden -I/usr/include/libusb-1.0 -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic -c -o libjaylink_la-device.lo `test -f 'device.c' || echo './'`device.c make[2]: Leaving directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' make[2]: Entering directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' /bin/sh ../libtool --tag=CC --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wextra -Werror -fvisibility=hidden -I/usr/include/libusb-1.0 -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic -c -o libjaylink_la-error.lo `test -f 'error.c' || echo './'`error.c make[2]: Leaving directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' make[2]: Entering directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' /bin/sh ../libtool --tag=CC --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wextra -Werror -fvisibility=hidden -I/usr/include/libusb-1.0 -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic -c -o libjaylink_la-jtag.lo `test -f 'jtag.c' || echo './'`jtag.c make[2]: Leaving directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' make[2]: Entering directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' /bin/sh ../libtool --tag=CC --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wextra -Werror -fvisibility=hidden -I/usr/include/libusb-1.0 -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic -c -o libjaylink_la-fileio.lo `test -f 'fileio.c' || echo './'`fileio.c make[2]: Leaving directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' make[2]: Entering directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' /bin/sh ../libtool --tag=CC --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wextra -Werror -fvisibility=hidden -I/usr/include/libusb-1.0 -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic -c -o libjaylink_la-list.lo `test -f 'list.c' || echo './'`list.c make[2]: Leaving directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' make[2]: Entering directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' /bin/sh ../libtool --tag=CC --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wextra -Werror -fvisibility=hidden -I/usr/include/libusb-1.0 -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic -c -o libjaylink_la-log.lo `test -f 'log.c' || echo './'`log.c make[2]: Leaving directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' make[2]: Entering directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' /bin/sh ../libtool --tag=CC --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wextra -Werror -fvisibility=hidden -I/usr/include/libusb-1.0 -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic -c -o libjaylink_la-strutil.lo `test -f 'strutil.c' || echo './'`strutil.c make[2]: Leaving directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' make[2]: Entering directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' /bin/sh ../libtool --tag=CC --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wextra -Werror -fvisibility=hidden -I/usr/include/libusb-1.0 -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic -c -o libjaylink_la-swd.lo `test -f 'swd.c' || echo './'`swd.c make[2]: Leaving directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' make[2]: Entering directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' /bin/sh ../libtool --tag=CC --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wextra -Werror -fvisibility=hidden -I/usr/include/libusb-1.0 -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic -c -o libjaylink_la-swo.lo `test -f 'swo.c' || echo './'`swo.c make[2]: Leaving directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' make[2]: Entering directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' /bin/sh ../libtool --tag=CC --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wextra -Werror -fvisibility=hidden -I/usr/include/libusb-1.0 -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic -c -o libjaylink_la-target.lo `test -f 'target.c' || echo './'`target.c make[2]: Leaving directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' make[2]: Entering directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' /bin/sh ../libtool --tag=CC --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wextra -Werror -fvisibility=hidden -I/usr/include/libusb-1.0 -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic -c -o libjaylink_la-util.lo `test -f 'util.c' || echo './'`util.c make[2]: Leaving directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' make[2]: Entering directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' /bin/sh ../libtool --tag=CC --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wextra -Werror -fvisibility=hidden -I/usr/include/libusb-1.0 -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic -c -o libjaylink_la-version.lo `test -f 'version.c' || echo './'`version.c make[2]: Leaving directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' make[2]: Entering directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' /bin/sh ../libtool --tag=CC --silent --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wextra -Werror -fvisibility=hidden -I/usr/include/libusb-1.0 -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic -c -o libjaylink_la-transport.lo `test -f 'transport.c' || echo './'`transport.c make[2]: Leaving directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' make[2]: Entering directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' /bin/sh ../libtool --tag=CC --silent --mode=link gcc -Wall -Wextra -Werror -fvisibility=hidden -I/usr/include/libusb-1.0 -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic -version-info 0:0:0 -no-undefined -Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -o libjaylink.la -rpath /usr/lib64 libjaylink_la-buffer.lo libjaylink_la-core.lo libjaylink_la-device.lo libjaylink_la-discovery.lo libjaylink_la-emucom.lo libjaylink_la-error.lo libjaylink_la-fileio.lo libjaylink_la-jtag.lo libjaylink_la-list.lo libjaylink_la-log.lo libjaylink_la-strutil.lo libjaylink_la-swd.lo libjaylink_la-swo.lo libjaylink_la-target.lo libjaylink_la-transport.lo libjaylink_la-util.lo libjaylink_la-version.lo -lusb-1.0 make[2]: Leaving directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.puIX9T + umask 022 + cd /builddir/build/BUILD + '[' /builddir/build/BUILDROOT/libjaylink-0.1.0-1.fc28.x86_64 '!=' / ']' + rm -rf /builddir/build/BUILDROOT/libjaylink-0.1.0-1.fc28.x86_64 ++ dirname /builddir/build/BUILDROOT/libjaylink-0.1.0-1.fc28.x86_64 + mkdir -p /builddir/build/BUILDROOT + mkdir /builddir/build/BUILDROOT/libjaylink-0.1.0-1.fc28.x86_64 + cd libjaylink-0.1.0 + rm -rf /builddir/build/BUILDROOT/libjaylink-0.1.0-1.fc28.x86_64 + /usr/bin/make install DESTDIR=/builddir/build/BUILDROOT/libjaylink-0.1.0-1.fc28.x86_64 'INSTALL=/usr/bin/install -p' Making install in libjaylink make[1]: Entering directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' make[2]: Entering directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/libjaylink-0.1.0-1.fc28.x86_64/usr/lib64' /bin/sh ../libtool --silent --mode=install /usr/bin/install -p libjaylink.la '/builddir/build/BUILDROOT/libjaylink-0.1.0-1.fc28.x86_64/usr/lib64' libtool: install: warning: remember to run `libtool --finish /usr/lib64' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/libjaylink-0.1.0-1.fc28.x86_64/usr/include/libjaylink' /usr/bin/install -p -m 644 libjaylink.h '/builddir/build/BUILDROOT/libjaylink-0.1.0-1.fc28.x86_64/usr/include/libjaylink' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/libjaylink-0.1.0-1.fc28.x86_64/usr/include/libjaylink' /usr/bin/install -p -m 644 version.h '/builddir/build/BUILDROOT/libjaylink-0.1.0-1.fc28.x86_64/usr/include/libjaylink' make[2]: Leaving directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' make[1]: Leaving directory '/builddir/build/BUILD/libjaylink-0.1.0/libjaylink' make[1]: Entering directory '/builddir/build/BUILD/libjaylink-0.1.0' make[2]: Entering directory '/builddir/build/BUILD/libjaylink-0.1.0' make[2]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/builddir/build/BUILDROOT/libjaylink-0.1.0-1.fc28.x86_64/usr/lib64/pkgconfig' /usr/bin/install -p -m 644 libjaylink.pc '/builddir/build/BUILDROOT/libjaylink-0.1.0-1.fc28.x86_64/usr/lib64/pkgconfig' make[2]: Leaving directory '/builddir/build/BUILD/libjaylink-0.1.0' make[1]: Leaving directory '/builddir/build/BUILD/libjaylink-0.1.0' + find /builddir/build/BUILDROOT/libjaylink-0.1.0-1.fc28.x86_64 -name '*.la' -exec rm -f '{}' ';' + /usr/lib/rpm/find-debuginfo.sh -j2 --strict-build-id -m -i --build-id-seed 0.1.0-1.fc28 --unique-debug-suffix -0.1.0-1.fc28.x86_64 --unique-debug-src-base libjaylink-0.1.0-1.fc28.x86_64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000 -S debugsourcefiles.list /builddir/build/BUILD/libjaylink-0.1.0 extracting debug info from /builddir/build/BUILDROOT/libjaylink-0.1.0-1.fc28.x86_64/usr/lib64/libjaylink.so.0.0.0 /usr/lib/rpm/sepdebugcrcfix: Updated 1 CRC32s, 0 CRC32s did match. 329 blocks + /usr/lib/rpm/check-buildroot + /usr/lib/rpm/brp-compress + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1 + /usr/lib/rpm/brp-python-hardlink Processing files: libjaylink-0.1.0-1.fc28.x86_64 Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.fWUWVm + umask 022 + cd /builddir/build/BUILD + cd libjaylink-0.1.0 + DOCDIR=/builddir/build/BUILDROOT/libjaylink-0.1.0-1.fc28.x86_64/usr/share/doc/libjaylink + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/libjaylink-0.1.0-1.fc28.x86_64/usr/share/doc/libjaylink + cp -pr README /builddir/build/BUILDROOT/libjaylink-0.1.0-1.fc28.x86_64/usr/share/doc/libjaylink + cp -pr NEWS /builddir/build/BUILDROOT/libjaylink-0.1.0-1.fc28.x86_64/usr/share/doc/libjaylink + exit 0 Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.Zs7EJP + umask 022 + cd /builddir/build/BUILD + cd libjaylink-0.1.0 + LICENSEDIR=/builddir/build/BUILDROOT/libjaylink-0.1.0-1.fc28.x86_64/usr/share/licenses/libjaylink + export LC_ALL=C + LC_ALL=C + export LICENSEDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/libjaylink-0.1.0-1.fc28.x86_64/usr/share/licenses/libjaylink + cp -pr COPYING /builddir/build/BUILDROOT/libjaylink-0.1.0-1.fc28.x86_64/usr/share/licenses/libjaylink + exit 0 Provides: libjaylink = 0.1.0-1.fc28 libjaylink(x86-64) = 0.1.0-1.fc28 libjaylink.so.0()(64bit) Requires(interp): /sbin/ldconfig /sbin/ldconfig Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(post): /sbin/ldconfig Requires(postun): /sbin/ldconfig Requires: libc.so.6()(64bit) libc.so.6(GLIBC_2.14)(64bit) libc.so.6(GLIBC_2.2.5)(64bit) libc.so.6(GLIBC_2.3.4)(64bit) libc.so.6(GLIBC_2.4)(64bit) libusb-1.0.so.0()(64bit) rtld(GNU_HASH) Processing files: libjaylink-devel-0.1.0-1.fc28.x86_64 Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.rCxBFi + umask 022 + cd /builddir/build/BUILD + cd libjaylink-0.1.0 + DOCDIR=/builddir/build/BUILDROOT/libjaylink-0.1.0-1.fc28.x86_64/usr/share/doc/libjaylink-devel + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/libjaylink-0.1.0-1.fc28.x86_64/usr/share/doc/libjaylink-devel + cp -pr HACKING /builddir/build/BUILDROOT/libjaylink-0.1.0-1.fc28.x86_64/usr/share/doc/libjaylink-devel + exit 0 Provides: libjaylink-devel = 0.1.0-1.fc28 libjaylink-devel(x86-64) = 0.1.0-1.fc28 pkgconfig(libjaylink) = 0.1.0 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /usr/bin/pkg-config libjaylink.so.0()(64bit) pkgconfig(libusb-1.0) Processing files: libjaylink-debugsource-0.1.0-1.fc28.x86_64 Provides: libjaylink-debugsource = 0.1.0-1.fc28 libjaylink-debugsource(x86-64) = 0.1.0-1.fc28 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Processing files: libjaylink-debuginfo-0.1.0-1.fc28.x86_64 Provides: debuginfo(build-id) = e868c9247b42736d9abc2eb25f855b7cc7b5c217 libjaylink-debuginfo = 0.1.0-1.fc28 libjaylink-debuginfo(x86-64) = 0.1.0-1.fc28 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Recommends: libjaylink-debugsource(x86-64) = 0.1.0-1.fc28 Checking for unpackaged file(s): /usr/lib/rpm/check-files /builddir/build/BUILDROOT/libjaylink-0.1.0-1.fc28.x86_64 Wrote: /builddir/build/RPMS/libjaylink-0.1.0-1.fc28.x86_64.rpm Wrote: /builddir/build/RPMS/libjaylink-devel-0.1.0-1.fc28.x86_64.rpm Wrote: /builddir/build/RPMS/libjaylink-debugsource-0.1.0-1.fc28.x86_64.rpm Wrote: /builddir/build/RPMS/libjaylink-debuginfo-0.1.0-1.fc28.x86_64.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.XT8w9L + umask 022 + cd /builddir/build/BUILD + cd libjaylink-0.1.0 + /usr/bin/rm -rf /builddir/build/BUILDROOT/libjaylink-0.1.0-1.fc28.x86_64 + exit 0 Finish: rpmbuild libjaylink-0.1.0-1.fc28.src.rpm Finish: build phase for libjaylink-0.1.0-1.fc28.src.rpm INFO: Done(/var/lib/copr-rpmbuild/results/libjaylink-0.1.0-1.fc28.src.rpm) Config(child) 1 minutes 36 seconds INFO: Results and/or logs in: /var/lib/copr-rpmbuild/results INFO: Cleaning up build root ('cleanup_on_success=True') Start: clean chroot INFO: unmounting tmpfs. INFO: unmounting tmpfs. Finish: clean chroot Finish: run