Mock Version: 2.11 ENTER ['do_with_status'](['bash', '--login', '-c', '/usr/bin/rpmbuild -bs --target x86_64 --nodeps /builddir/build/SPECS/system-config-printer.spec'], chrootPath='/var/lib/mock/epel-8-x86_64-1624981805.094572/root'env={'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PROMPT_COMMAND': 'printf "\\033]0;\\007"', 'PS1': ' \\s-\\v\\$ ', 'LANG': 'C.UTF-8'}shell=Falselogger=timeout=0uid=1001gid=135user='mockbuild'nspawn_args=['--capability=cap_ipc_lock', '--rlimit=RLIMIT_NOFILE=10240', '--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.m1i06egf:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11']unshare_net=FalseprintOutput=True) Using nspawn with args ['--capability=cap_ipc_lock', '--rlimit=RLIMIT_NOFILE=10240', '--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.m1i06egf:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11'] Executing command: ['/usr/bin/systemd-nspawn', '-q', '-M', '74d7c24529ef4ec89d206bb5913e23a0', '-D', '/var/lib/mock/epel-8-x86_64-1624981805.094572/root', '-a', '-u', 'mockbuild', '--capability=cap_ipc_lock', '--rlimit=RLIMIT_NOFILE=10240', '--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.m1i06egf:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11', '--console=pipe', '--setenv=TERM=vt100', '--setenv=SHELL=/bin/bash', '--setenv=HOME=/builddir', '--setenv=HOSTNAME=mock', '--setenv=PATH=/usr/bin:/bin:/usr/sbin:/sbin', '--setenv=PROMPT_COMMAND=printf "\\033]0;\\007"', '--setenv=PS1= \\s-\\v\\$ ', '--setenv=LANG=C.UTF-8', '--resolv-conf=off', 'bash', '--login', '-c', '/usr/bin/rpmbuild -bs --target x86_64 --nodeps /builddir/build/SPECS/system-config-printer.spec'] with env {'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PROMPT_COMMAND': 'printf "\\033]0;\\007"', 'PS1': ' \\s-\\v\\$ ', 'LANG': 'C.UTF-8', 'SYSTEMD_NSPAWN_TMPFS_TMP': '0'} and shell False Building target platforms: x86_64 Building for target x86_64 Wrote: /builddir/build/SRPMS/system-config-printer-1.5.15-2.el8.src.rpm Child return code was: 0 ENTER ['do_with_status'](['bash', '--login', '-c', '/usr/bin/rpmbuild -bb --target x86_64 --nodeps /builddir/build/SPECS/system-config-printer.spec'], chrootPath='/var/lib/mock/epel-8-x86_64-1624981805.094572/root'env={'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PROMPT_COMMAND': 'printf "\\033]0;\\007"', 'PS1': ' \\s-\\v\\$ ', 'LANG': 'C.UTF-8'}shell=Falselogger=timeout=0uid=1001gid=135user='mockbuild'nspawn_args=['--capability=cap_ipc_lock', '--rlimit=RLIMIT_NOFILE=10240', '--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.m1i06egf:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11']unshare_net=FalseprintOutput=True) Using nspawn with args ['--capability=cap_ipc_lock', '--rlimit=RLIMIT_NOFILE=10240', '--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.m1i06egf:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11'] Executing command: ['/usr/bin/systemd-nspawn', '-q', '-M', '015b5bae78464bb198285ab88e15f5cf', '-D', '/var/lib/mock/epel-8-x86_64-1624981805.094572/root', '-a', '-u', 'mockbuild', '--capability=cap_ipc_lock', '--rlimit=RLIMIT_NOFILE=10240', '--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.m1i06egf:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11', '--console=pipe', '--setenv=TERM=vt100', '--setenv=SHELL=/bin/bash', '--setenv=HOME=/builddir', '--setenv=HOSTNAME=mock', '--setenv=PATH=/usr/bin:/bin:/usr/sbin:/sbin', '--setenv=PROMPT_COMMAND=printf "\\033]0;\\007"', '--setenv=PS1= \\s-\\v\\$ ', '--setenv=LANG=C.UTF-8', '--resolv-conf=off', 'bash', '--login', '-c', '/usr/bin/rpmbuild -bb --target x86_64 --nodeps /builddir/build/SPECS/system-config-printer.spec'] with env {'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PROMPT_COMMAND': 'printf "\\033]0;\\007"', 'PS1': ' \\s-\\v\\$ ', 'LANG': 'C.UTF-8', 'SYSTEMD_NSPAWN_TMPFS_TMP': '0'} and shell False Building target platforms: x86_64 Building for target x86_64 Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.B8343t + umask 022 + cd /builddir/build/BUILD + cd /builddir/build/BUILD + rm -rf system-config-printer-1.5.15 + /usr/bin/xz -dc /builddir/build/SOURCES/system-config-printer-1.5.15.tar.xz + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd system-config-printer-1.5.15 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + /usr/bin/git init -q + /usr/bin/git config user.name rpm-build + /usr/bin/git config user.email '' + /usr/bin/git add . + /usr/bin/git commit -q --allow-empty -a --author 'rpm-build ' -m 'system-config-printer-1.5.15 base' + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.fuZ0Ft + umask 022 + cd /builddir/build/BUILD + cd system-config-printer-1.5.15 + CFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib64/gfortran/modules' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib64/gfortran/modules' + export FCFLAGS + LDFLAGS='-Wl,-z,relro -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + '[' 1 = 1 ']' +++ dirname ./configure ++ find . -name config.guess -o -name config.sub + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./config.guess + '[' -f /usr/lib/rpm/redhat/config.guess ']' + /usr/bin/rm -f ./config.guess ++ basename ./config.guess + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.guess ./config.guess '/usr/lib/rpm/redhat/config.guess' -> './config.guess' + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./config.sub + '[' -f /usr/lib/rpm/redhat/config.sub ']' + /usr/bin/rm -f ./config.sub ++ basename ./config.sub + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.sub ./config.sub '/usr/lib/rpm/redhat/config.sub' -> './config.sub' + '[' 1 = 1 ']' + '[' x '!=' 'x-Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' ']' ++ find . -name ltmain.sh + ./configure --build=x86_64-redhat-linux-gnu --host=x86_64-redhat-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-udev-rules checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether NLS is requested... yes checking for intltool-update... /usr/bin/intltool-update checking for intltool-merge... /usr/bin/intltool-merge checking for intltool-extract... /usr/bin/intltool-extract checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for perl... /usr/bin/perl checking for perl >= 5.8.1... 5.26.3 checking for XML::Parser... ok checking for a sed that does not truncate output... /usr/bin/sed checking for msgfmt... (cached) /usr/bin/msgfmt checking for gmsgfmt... (cached) /usr/bin/msgfmt checking for xgettext... (cached) /usr/bin/xgettext checking for msgmerge... (cached) /usr/bin/msgmerge checking whether make supports the include directive... yes (GNU style) checking for x86_64-redhat-linux-gnu-gcc... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... none checking build system type... x86_64-redhat-linux-gnu checking host system type... x86_64-redhat-linux-gnu checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking 32-bit host C ABI... no checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ELF binary format... yes checking for the common suffixes of directories in the library search path... lib,lib,lib64 checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyPreferredLanguages... no checking for GNU gettext in libc... yes checking whether to use NLS... yes checking where the gettext function comes from... libc checking for a Python interpreter with version >= 3... python3 checking for python3... /usr/bin/python3 checking for python3 version... 3.6 checking for python3 platform... linux checking for python3 script directory... ${prefix}/lib/python3.6/site-packages checking for python3 extension module directory... ${exec_prefix}/lib64/python3.6/site-packages checking for x86_64-redhat-linux-gnu-pkg-config... /usr/bin/x86_64-redhat-linux-gnu-pkg-config checking pkg-config is at least version 0.9.0... yes checking for GLIB... yes checking for libudev... yes checking for libusb... yes checking for x86_64-redhat-linux-gnu-pkg-config... (cached) /usr/bin/x86_64-redhat-linux-gnu-pkg-config checking pkg-config is at least version 0.9.0... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating po/Makefile.in config.status: creating system-config-printer config.status: creating system-config-printer-applet config.status: creating install-printerdriver config.status: creating dbus/scp-dbus-service config.status: creating udev/configure-printer@.service config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile config.status: executing depfiles commands config.status: executing po/stamp-it commands + /usr/bin/make -O -j2 Making all in po make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo ar | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ar.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo as | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file as.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo ast | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ast.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo bg | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file bg.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo bn_IN | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file bn_IN.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo bn | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file bn.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo bs | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file bs.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo br | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file br.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo ca | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ca.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo cs | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file cs.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo cy | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file cy.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo da | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file da.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo de | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file de.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo el | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file el.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo en_GB | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file en_GB.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo es | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file es.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo et | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file et.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo fa | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file fa.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo fi | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file fi.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo fr | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file fr.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo fur | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file fur.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo gu | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file gu.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo he | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file he.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo hi | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file hi.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo hr | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file hr.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo hu | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file hu.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo id | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file id.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo is | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file is.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo it | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file it.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo ja | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ja.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo kn | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file kn.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo ko | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ko.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo lt | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file lt.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo mai | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file mai.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo lv | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file lv.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo ml | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ml.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo mr | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file mr.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo ms | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ms.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo nb | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file nb.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo nds | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file nds.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo nl | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file nl.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo nn | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file nn.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo oc | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file oc.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo or | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file or.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo pa | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file pa.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo pl | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file pl.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo pt_BR | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file pt_BR.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo pt | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file pt.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo ro | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ro.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo ru | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ru.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo si | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file si.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo sl | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file sl.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo sk | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file sk.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo sr@latin | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file sr@latin.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo sr | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file sr.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo sv | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file sv.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo ta | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ta.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo te | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file te.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo th | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file th.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo tr | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file tr.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo uk | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file uk.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo vi | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file vi.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo zh_CN | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file zh_CN.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' file=`echo zh_TW | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file zh_TW.po make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15' LC_ALL=C /usr/bin/intltool-merge -x -u -c ./po/.intltool-merge-cache ./po system-config-printer.appdata.xml.in system-config-printer.appdata.xml Generating and caching the translation database Merging translations into system-config-printer.appdata.xml. CREATED system-config-printer.appdata.xml make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15' xmlto man -o man man/system-config-printer.xml touch .stamp-man-pages-built make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15' Warn: AUTHOR sect.: no personblurb|contrib for Tim Waugh Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/contr Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/perso Note: Writing system-config-printer.1 Warn: AUTHOR sect.: no personblurb|contrib for Tim Waugh Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/contr Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/perso Note: Writing system-config-printer-applet.1 make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15' LC_ALL=C /usr/bin/intltool-merge -d -u -c ./po/.intltool-merge-cache ./po system-config-printer.desktop.in system-config-printer.desktop Found cached translation database Merging translations into system-config-printer.desktop. make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15' sed \ -e "s|\@prefix\@|/usr|" \ -e "s|\@datadir\@|/usr/share|" \ -e "s|\@localedir\@|/usr/share/locale|" \ -e "s|\@VERSION\@|1.5.15|" \ -e "s|\@PACKAGE\@|system-config-printer|" \ config.py.in > config.py make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15' LC_ALL=C /usr/bin/intltool-merge -d -u -c ./po/.intltool-merge-cache ./po print-applet.desktop.in print-applet.desktop Found cached translation database Merging translations into print-applet.desktop. make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15' if [ "." != "." ]; then \ cp ./setup.py .; \ /usr/bin/mkdir -p cupshelpers; \ for file in cupshelpers/__init__.py cupshelpers/cupshelpers.py cupshelpers/installdriver.py cupshelpers/ppds.py cupshelpers/openprinting.py cupshelpers/xmldriverprefs.py; do \ cp ./$file $file; \ done; \ fi touch .stamp-distutils-in-builddir make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15' sed \ -e "s|\@bindir\@|/usr/bin|" \ dbus/org.fedoraproject.Config.Printing.service.in >dbus/org.fedoraproject.Config.Printing.service make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15' /usr/bin/mkdir -p cupshelpers sed \ -e "s|\@prefix\@|/usr|" \ -e "s|\@sysconfdir\@|/etc|" \ -e "s|\@cupsserverbindir\@|/usr/lib/cups|" \ cupshelpers/config.py.in > cupshelpers/config.py make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15' /usr/bin/python3 setup.py build running build running build_py creating build creating build/lib creating build/lib/cupshelpers copying cupshelpers/config.py -> build/lib/cupshelpers copying cupshelpers/cupshelpers.py -> build/lib/cupshelpers copying cupshelpers/installdriver.py -> build/lib/cupshelpers copying cupshelpers/ppds.py -> build/lib/cupshelpers copying cupshelpers/__init__.py -> build/lib/cupshelpers copying cupshelpers/xmldriverprefs.py -> build/lib/cupshelpers copying cupshelpers/openprinting.py -> build/lib/cupshelpers make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15' gcc -DPACKAGE_NAME=\"system-config-printer\" -DPACKAGE_TARNAME=\"system-config-printer\" -DPACKAGE_VERSION=\"1.5.15\" -DPACKAGE_STRING=\"system-config-printer\ 1.5.15\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"system-config-printer\" -DVERSION=\"1.5.15\" -DENABLE_NLS=1 -DHAVE_GETTEXT=1 -DHAVE_DCGETTEXT=1 -I. -I/usr/include/libusb-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -c -o udev/udev_configure_printer-udev-configure-printer.o `test -f 'udev/udev-configure-printer.c' || echo './'`udev/udev-configure-printer.c make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15' udev/udev-configure-printer.c: In function 'find_matching_device_uris': udev/udev-configure-printer.c:1024:3: warning: 'httpConnectEncrypt' is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] cups = httpConnectEncrypt (cupsServer (), ippPort(), cupsEncryption ()); ^~~~ In file included from /usr/include/cups/ipp.h:18, from /usr/include/cups/cups.h:27, from udev/udev-configure-printer.c:36: /usr/include/cups/http.h:458:17: note: declared here extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function 'for_each_matching_queue': udev/udev-configure-printer.c:1356:3: warning: 'httpConnectEncrypt' is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), ^~~~~~ In file included from /usr/include/cups/ipp.h:18, from /usr/include/cups/cups.h:27, from udev/udev-configure-printer.c:36: /usr/include/cups/http.h:458:17: note: declared here extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function 'enable_queue': udev/udev-configure-printer.c:1542:3: warning: 'httpConnectEncrypt' is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), ^~~~~~ In file included from /usr/include/cups/ipp.h:18, from /usr/include/cups/cups.h:27, from udev/udev-configure-printer.c:36: /usr/include/cups/http.h:458:17: note: declared here extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function 'remove_queue': udev/udev-configure-printer.c:1733:3: warning: 'httpConnectEncrypt' is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), ^~~~~~ In file included from /usr/include/cups/ipp.h:18, from /usr/include/cups/cups.h:27, from udev/udev-configure-printer.c:36: /usr/include/cups/http.h:458:17: note: declared here extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function 'disable_queue': udev/udev-configure-printer.c:1765:3: warning: 'httpConnectEncrypt' is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), ^~~~~~ In file included from /usr/include/cups/ipp.h:18, from /usr/include/cups/cups.h:27, from udev/udev-configure-printer.c:36: /usr/include/cups/http.h:458:17: note: declared here extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); ^~~~~~~~~~~~~~~~~~ make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15' gcc -I/usr/include/libusb-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -Wl,-z,relro -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -o udev/udev-configure-printer udev/udev_configure_printer-udev-configure-printer.o -lcups -ludev -lusb-1.0 -lglib-2.0 make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15' + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.VgdHjv + umask 022 + cd /builddir/build/BUILD + '[' /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64 '!=' / ']' + rm -rf /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64 ++ dirname /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64 + mkdir -p /builddir/build/BUILDROOT + mkdir /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64 + cd system-config-printer-1.5.15 + /usr/bin/make install DESTDIR=/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64 'INSTALL=/usr/bin/install -p' Making install in po make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' linguas="ar as ast bg bn_IN bn br bs ca cs cy da de el en_GB es et fa fi fr fur gu he hi hr hu id is it ja kn ko lt lv mai ml mr ms nb nds nl nn oc or pa pl pt_BR pt ro ru si sk sl sr@latin sr sv ta te th tr uk vi zh_CN zh_TW "; \ for lang in $linguas; do \ dir=/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/$lang/LC_MESSAGES; \ /bin/sh /builddir/build/BUILD/system-config-printer-1.5.15/install-sh -d $dir; \ if test -r $lang.gmo; then \ /usr/bin/install -p -m 644 $lang.gmo $dir/system-config-printer.mo; \ echo "installing $lang.gmo as $dir/system-config-printer.mo"; \ else \ /usr/bin/install -p -m 644 ./$lang.gmo $dir/system-config-printer.mo; \ echo "installing ./$lang.gmo as" \ "$dir/system-config-printer.mo"; \ fi; \ if test -r $lang.gmo.m; then \ /usr/bin/install -p -m 644 $lang.gmo.m $dir/system-config-printer.mo.m; \ echo "installing $lang.gmo.m as $dir/system-config-printer.mo.m"; \ else \ if test -r ./$lang.gmo.m ; then \ /usr/bin/install -p -m 644 ./$lang.gmo.m \ $dir/system-config-printer.mo.m; \ echo "installing ./$lang.gmo.m as" \ "$dir/system-config-printer.mo.m"; \ else \ true; \ fi; \ fi; \ done installing ar.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/ar/LC_MESSAGES/system-config-printer.mo installing as.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/as/LC_MESSAGES/system-config-printer.mo installing ast.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/ast/LC_MESSAGES/system-config-printer.mo installing bg.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/bg/LC_MESSAGES/system-config-printer.mo installing bn_IN.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/bn_IN/LC_MESSAGES/system-config-printer.mo installing bn.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/bn/LC_MESSAGES/system-config-printer.mo installing br.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/br/LC_MESSAGES/system-config-printer.mo installing bs.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/bs/LC_MESSAGES/system-config-printer.mo installing ca.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/ca/LC_MESSAGES/system-config-printer.mo installing cs.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/cs/LC_MESSAGES/system-config-printer.mo installing cy.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/cy/LC_MESSAGES/system-config-printer.mo installing da.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/da/LC_MESSAGES/system-config-printer.mo installing de.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/de/LC_MESSAGES/system-config-printer.mo installing el.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/el/LC_MESSAGES/system-config-printer.mo installing en_GB.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/en_GB/LC_MESSAGES/system-config-printer.mo installing es.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/es/LC_MESSAGES/system-config-printer.mo installing et.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/et/LC_MESSAGES/system-config-printer.mo installing fa.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/fa/LC_MESSAGES/system-config-printer.mo installing fi.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/fi/LC_MESSAGES/system-config-printer.mo installing fr.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/fr/LC_MESSAGES/system-config-printer.mo installing fur.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/fur/LC_MESSAGES/system-config-printer.mo installing gu.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/gu/LC_MESSAGES/system-config-printer.mo installing he.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/he/LC_MESSAGES/system-config-printer.mo installing hi.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/hi/LC_MESSAGES/system-config-printer.mo installing hr.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/hr/LC_MESSAGES/system-config-printer.mo installing hu.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/hu/LC_MESSAGES/system-config-printer.mo installing id.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/id/LC_MESSAGES/system-config-printer.mo installing is.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/is/LC_MESSAGES/system-config-printer.mo installing it.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/it/LC_MESSAGES/system-config-printer.mo installing ja.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/ja/LC_MESSAGES/system-config-printer.mo installing kn.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/kn/LC_MESSAGES/system-config-printer.mo installing ko.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/ko/LC_MESSAGES/system-config-printer.mo installing lt.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/lt/LC_MESSAGES/system-config-printer.mo installing lv.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/lv/LC_MESSAGES/system-config-printer.mo installing mai.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/mai/LC_MESSAGES/system-config-printer.mo installing ml.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/ml/LC_MESSAGES/system-config-printer.mo installing mr.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/mr/LC_MESSAGES/system-config-printer.mo installing ms.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/ms/LC_MESSAGES/system-config-printer.mo installing nb.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/nb/LC_MESSAGES/system-config-printer.mo installing nds.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/nds/LC_MESSAGES/system-config-printer.mo installing nl.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/nl/LC_MESSAGES/system-config-printer.mo installing nn.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/nn/LC_MESSAGES/system-config-printer.mo installing oc.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/oc/LC_MESSAGES/system-config-printer.mo installing or.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/or/LC_MESSAGES/system-config-printer.mo installing pa.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/pa/LC_MESSAGES/system-config-printer.mo installing pl.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/pl/LC_MESSAGES/system-config-printer.mo installing pt_BR.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/pt_BR/LC_MESSAGES/system-config-printer.mo installing pt.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/pt/LC_MESSAGES/system-config-printer.mo installing ro.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/ro/LC_MESSAGES/system-config-printer.mo installing ru.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/ru/LC_MESSAGES/system-config-printer.mo installing si.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/si/LC_MESSAGES/system-config-printer.mo installing sk.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/sk/LC_MESSAGES/system-config-printer.mo installing sl.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/sl/LC_MESSAGES/system-config-printer.mo installing sr@latin.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/sr@latin/LC_MESSAGES/system-config-printer.mo installing sr.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/sr/LC_MESSAGES/system-config-printer.mo installing sv.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/sv/LC_MESSAGES/system-config-printer.mo installing ta.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/ta/LC_MESSAGES/system-config-printer.mo installing te.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/te/LC_MESSAGES/system-config-printer.mo installing th.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/th/LC_MESSAGES/system-config-printer.mo installing tr.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/tr/LC_MESSAGES/system-config-printer.mo installing uk.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/uk/LC_MESSAGES/system-config-printer.mo installing vi.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/vi/LC_MESSAGES/system-config-printer.mo installing zh_CN.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/zh_CN/LC_MESSAGES/system-config-printer.mo installing zh_TW.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/locale/zh_TW/LC_MESSAGES/system-config-printer.mo make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15' /usr/bin/python3 setup.py build running build running build_py make[2]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.15' /usr/bin/python3 setup.py install --prefix=/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr running install running build running build_py running install_lib creating /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/lib creating /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/lib/python3.6 creating /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/lib/python3.6/site-packages creating /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/lib/python3.6/site-packages/cupshelpers copying build/lib/cupshelpers/openprinting.py -> /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/lib/python3.6/site-packages/cupshelpers copying build/lib/cupshelpers/xmldriverprefs.py -> /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/lib/python3.6/site-packages/cupshelpers copying build/lib/cupshelpers/__init__.py -> /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/lib/python3.6/site-packages/cupshelpers copying build/lib/cupshelpers/ppds.py -> /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/lib/python3.6/site-packages/cupshelpers copying build/lib/cupshelpers/installdriver.py -> /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/lib/python3.6/site-packages/cupshelpers copying build/lib/cupshelpers/cupshelpers.py -> /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/lib/python3.6/site-packages/cupshelpers copying build/lib/cupshelpers/config.py -> /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/lib/python3.6/site-packages/cupshelpers byte-compiling /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/lib/python3.6/site-packages/cupshelpers/openprinting.py to openprinting.cpython-36.pyc byte-compiling /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/lib/python3.6/site-packages/cupshelpers/xmldriverprefs.py to xmldriverprefs.cpython-36.pyc byte-compiling /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/lib/python3.6/site-packages/cupshelpers/__init__.py to __init__.cpython-36.pyc byte-compiling /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/lib/python3.6/site-packages/cupshelpers/ppds.py to ppds.cpython-36.pyc byte-compiling /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/lib/python3.6/site-packages/cupshelpers/installdriver.py to installdriver.cpython-36.pyc byte-compiling /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/lib/python3.6/site-packages/cupshelpers/cupshelpers.py to cupshelpers.cpython-36.pyc byte-compiling /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/lib/python3.6/site-packages/cupshelpers/config.py to config.cpython-36.pyc running install_egg_info Writing /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/lib/python3.6/site-packages/cupshelpers-1.0-py3.6.egg-info /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/bin' /usr/bin/install -p system-config-printer install-printerdriver system-config-printer-applet dbus/scp-dbus-service '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/bin' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/metainfo' /usr/bin/install -p -m 644 system-config-printer.appdata.xml '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/metainfo' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/etc/cupshelpers' /usr/bin/install -p -m 644 xml/preferreddrivers.xml '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/etc/cupshelpers' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/etc/dbus-1/system.d/' /usr/bin/install -p -m 644 dbus/com.redhat.NewPrinterNotification.conf dbus/com.redhat.PrinterDriversInstaller.conf '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/etc/dbus-1/system.d/' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/dbus-1/interfaces/' /usr/bin/install -p -m 644 dbus/org.fedoraproject.Config.Printing.xml '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/dbus-1/interfaces/' mkdir -p /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/applications/ mkdir -p /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/applications/ desktop-file-install \ --dir /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/applications/ \ --add-category System \ --add-category Settings \ --add-category HardwareSettings \ --add-category Printing \ --add-category GTK \ system-config-printer.desktop desktop-file-install \ --dir /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/etc/xdg/autostart/ \ --add-category System \ --add-category Monitor \ --add-category GTK \ print-applet.desktop /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/man/man1' /usr/bin/install -p -m 644 man/system-config-printer.1 man/system-config-printer-applet.1 '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/man/man1' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/system-config-printer' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/system-config-printer/troubleshoot' /usr/bin/install -p -m 644 troubleshoot/base.py troubleshoot/CheckLocalServerPublishing.py troubleshoot/CheckNetworkServerSanity.py troubleshoot/CheckPPDSanity.py troubleshoot/CheckPrinterSanity.py troubleshoot/CheckSELinux.py troubleshoot/CheckUSBPermissions.py troubleshoot/ChooseNetworkPrinter.py troubleshoot/ChoosePrinter.py troubleshoot/DeviceListed.py troubleshoot/ErrorLogCheckpoint.py troubleshoot/ErrorLogFetch.py troubleshoot/ErrorLogParse.py troubleshoot/Locale.py troubleshoot/LocalOrRemote.py troubleshoot/NetworkCUPSPrinterShared.py troubleshoot/PrinterStateReasons.py troubleshoot/PrintTestPage.py troubleshoot/QueueNotEnabled.py troubleshoot/QueueRejectingJobs.py troubleshoot/RemoteAddress.py troubleshoot/SchedulerNotRunning.py troubleshoot/ServerFirewalled.py troubleshoot/Shrug.py troubleshoot/VerifyPackages.py troubleshoot/Welcome.py '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/system-config-printer/troubleshoot' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/system-config-printer/ui' /usr/bin/install -p -m 644 ui/AboutDialog.ui ui/ConnectDialog.ui ui/ConnectingDialog.ui ui/InstallDialog.ui ui/JobsWindow.ui ui/NewPrinterName.ui ui/NewPrinterWindow.ui ui/PrinterPropertiesDialog.ui ui/PrintersWindow.ui ui/ServerSettingsDialog.ui ui/SMBBrowseDialog.ui ui/statusicon_popupmenu.ui ui/WaitWindow.ui '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/system-config-printer/ui' /usr/bin/install -p -m 644 asyncconn.py asyncipp.py asyncpk1.py authconn.py config.py cupspk.py debug.py dnssdresolve.py errordialogs.py HIG.py firewallsettings.py gui.py gtkinklevel.py installpackage.py jobviewer.py killtimer.py monitor.py newprinter.py OpenPrintingRequest.py options.py optionwidgets.py PhysicalDevice.py ppdcache.py ppdippstr.py ppdsloader.py printerproperties.py probe_printer.py SearchCriterion.py serversettings.py smburi.py statereason.py timedops.py ToolbarSearchEntry.py userdefault.py '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/system-config-printer/.' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/system-config-printer/xml' /usr/bin/install -p -m 644 xml/preferreddrivers.rng xml/validate.py '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/system-config-printer/xml' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/system-config-printer/icons' /usr/bin/install -p -m 644 icons/i-network-printer.png '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/system-config-printer/icons' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/system-config-printer' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/system-config-printer/troubleshoot/' /usr/bin/install -p troubleshoot/__init__.py '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/system-config-printer/troubleshoot/' /usr/bin/install -p check-device-ids.py pysmb.py scp-dbus-service.py system-config-printer.py install-printerdriver.py applet.py '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/system-config-printer' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/dbus-1/services/' /usr/bin/install -p -m 644 dbus/org.fedoraproject.Config.Printing.service '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/dbus-1/services/' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/lib/systemd/system' /usr/bin/install -p -m 644 udev/configure-printer@.service '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/lib/systemd/system' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/lib/udev' /usr/bin/install -p udev/udev-configure-printer '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/lib/udev' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/lib/udev' /usr/bin/install -p udev/udev-add-printer '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/lib/udev' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/lib/udev/rules.d' /usr/bin/install -p -m 644 udev/70-printers.rules '/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/lib/udev/rules.d' make[2]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15' make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.15' + /usr/bin/mkdir -p /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/var/run/udev-configure-printer + touch /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/var/run/udev-configure-printer/usb-uris + python_binary=/usr/bin/python3.6 ~/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64 ~/build/BUILD/system-config-printer-1.5.15 + buildroot_path=/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64//usr/share/system-config-printer + bytecode_compilation_path=.//usr/share/system-config-printer + failure=0 + pushd /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64 + xargs -0 /usr/bin/python3.6 -O -m py_compile + find .//usr/share/system-config-printer -type f -a -name '*.py' -print0 + find .//usr/share/system-config-printer -type f -a -name '*.py' -print0 + xargs -0 /usr/bin/python3.6 -m py_compile + popd ~/build/BUILD/system-config-printer-1.5.15 + test 0 -eq 0 + /usr/lib/rpm/find-lang.sh /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64 system-config-printer + /usr/lib/rpm/find-debuginfo.sh -j2 --strict-build-id -m -i --build-id-seed 1.5.15-2.el8 --unique-debug-suffix -1.5.15-2.el8.x86_64 --unique-debug-src-base system-config-printer-1.5.15-2.el8.x86_64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000 -S debugsourcefiles.list /builddir/build/BUILD/system-config-printer-1.5.15 extracting debug info from /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/lib/udev/udev-configure-printer /usr/lib/rpm/sepdebugcrcfix: Updated 1 CRC32s, 0 CRC32s did match. 99 blocks + /usr/lib/rpm/check-buildroot + /usr/lib/rpm/redhat/brp-ldconfig /sbin/ldconfig: Warning: ignoring configuration file that cannot be opened: /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/etc/ld.so.conf: No such file or directory + /usr/lib/rpm/brp-compress + /usr/lib/rpm/brp-strip /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-python-hardlink + PYTHON3=/usr/bin/python3.6 + /usr/lib/rpm/redhat/brp-mangle-shebangs mangling shebang in /usr/lib/udev/udev-add-printer from /usr/bin/python3 -sB to #!/usr/bin/python3.6 -sB mangling shebang in /usr/share/system-config-printer/applet.py from /usr/bin/python3 to #!/usr/bin/python3.6 mangling shebang in /usr/share/system-config-printer/install-printerdriver.py from /usr/bin/python3 to #!/usr/bin/python3.6 mangling shebang in /usr/share/system-config-printer/system-config-printer.py from /usr/bin/python3 to #!/usr/bin/python3.6 mangling shebang in /usr/share/system-config-printer/scp-dbus-service.py from /usr/bin/python3 to #!/usr/bin/python3.6 mangling shebang in /usr/share/system-config-printer/pysmb.py from /usr/bin/python3 to #!/usr/bin/python3.6 mangling shebang in /usr/share/system-config-printer/check-device-ids.py from /usr/bin/python3 to #!/usr/bin/python3.6 mangling shebang in /usr/share/system-config-printer/troubleshoot/__init__.py from /usr/bin/python3 to #!/usr/bin/python3.6 Processing files: system-config-printer-1.5.15-2.el8.x86_64 Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.Z4XrSv + umask 022 + cd /builddir/build/BUILD + cd system-config-printer-1.5.15 + DOCDIR=/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/doc/system-config-printer + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/doc/system-config-printer + cp -pr ChangeLog /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/doc/system-config-printer + cp -pr NEWS /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/doc/system-config-printer + cp -pr ABOUT-NLS /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/doc/system-config-printer + cp -pr AUTHORS /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/doc/system-config-printer + cp -pr ChangeLog-OLD /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/doc/system-config-printer + exit 0 Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.x5OiAt + umask 022 + cd /builddir/build/BUILD + cd system-config-printer-1.5.15 + LICENSEDIR=/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/licenses/system-config-printer + export LC_ALL=C + LC_ALL=C + export LICENSEDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/licenses/system-config-printer + cp -pr COPYING /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/licenses/system-config-printer + exit 0 Provides: application() application(system-config-printer.desktop) metainfo() metainfo(system-config-printer.appdata.xml) system-config-printer = 1.5.15-2.el8 system-config-printer(x86-64) = 1.5.15-2.el8 Requires(interp): /bin/sh Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(post): /bin/sh systemd Requires(preun): systemd Requires(postun): systemd Requires: /bin/sh /usr/bin/python3.6 Processing files: system-config-printer-libs-1.5.15-2.el8.noarch Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.huQU2t + umask 022 + cd /builddir/build/BUILD + cd system-config-printer-1.5.15 + DOCDIR=/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/doc/system-config-printer-libs + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/doc/system-config-printer-libs + cp -pr ChangeLog /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/doc/system-config-printer-libs + cp -pr NEWS /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/doc/system-config-printer-libs + cp -pr ABOUT-NLS /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/doc/system-config-printer-libs + cp -pr AUTHORS /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/doc/system-config-printer-libs + cp -pr ChangeLog-OLD /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/doc/system-config-printer-libs + exit 0 Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.gGsLut + umask 022 + cd /builddir/build/BUILD + cd system-config-printer-1.5.15 + LICENSEDIR=/builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/licenses/system-config-printer-libs + export LC_ALL=C + LC_ALL=C + export LICENSEDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/licenses/system-config-printer-libs + cp -pr COPYING /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64/usr/share/licenses/system-config-printer-libs + exit 0 Provides: config(system-config-printer-libs) = 1.5.15-2.el8 python3.6dist(cupshelpers) = 1.0 python3dist(cupshelpers) = 1.0 system-config-printer-libs = 1.5.15-2.el8 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /bin/sh /usr/bin/python3.6 python(abi) = 3.6 Suggests: python3-smbc Processing files: system-config-printer-applet-1.5.15-2.el8.x86_64 Provides: system-config-printer-applet = 1.5.15-2.el8 system-config-printer-applet(x86-64) = 1.5.15-2.el8 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /bin/sh /usr/bin/python3.6 Processing files: system-config-printer-udev-1.5.15-2.el8.x86_64 Provides: config(system-config-printer-udev) = 1.5.15-2.el8 system-config-printer-udev = 1.5.15-2.el8 system-config-printer-udev(x86-64) = 1.5.15-2.el8 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /usr/bin/python3.6 libc.so.6()(64bit) libc.so.6(GLIBC_2.14)(64bit) libc.so.6(GLIBC_2.2.5)(64bit) libc.so.6(GLIBC_2.3)(64bit) libc.so.6(GLIBC_2.3.4)(64bit) libc.so.6(GLIBC_2.4)(64bit) libcups.so.2()(64bit) libglib-2.0.so.0()(64bit) libudev.so.1()(64bit) libudev.so.1(LIBUDEV_183)(64bit) libusb-1.0.so.0()(64bit) rtld(GNU_HASH) Processing files: system-config-printer-debugsource-1.5.15-2.el8.x86_64 Provides: system-config-printer-debugsource = 1.5.15-2.el8 system-config-printer-debugsource(x86-64) = 1.5.15-2.el8 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Processing files: system-config-printer-udev-debuginfo-1.5.15-2.el8.x86_64 Provides: debuginfo(build-id) = a618a3fc5be6d238e7379203a5f7d5c85dd687a9 system-config-printer-udev-debuginfo = 1.5.15-2.el8 system-config-printer-udev-debuginfo(x86-64) = 1.5.15-2.el8 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Recommends: system-config-printer-debugsource(x86-64) = 1.5.15-2.el8 Checking for unpackaged file(s): /usr/lib/rpm/check-files /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64 Wrote: /builddir/build/RPMS/system-config-printer-1.5.15-2.el8.x86_64.rpm Wrote: /builddir/build/RPMS/system-config-printer-libs-1.5.15-2.el8.noarch.rpm Wrote: /builddir/build/RPMS/system-config-printer-applet-1.5.15-2.el8.x86_64.rpm Wrote: /builddir/build/RPMS/system-config-printer-udev-1.5.15-2.el8.x86_64.rpm Wrote: /builddir/build/RPMS/system-config-printer-debugsource-1.5.15-2.el8.x86_64.rpm Wrote: /builddir/build/RPMS/system-config-printer-udev-debuginfo-1.5.15-2.el8.x86_64.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.Zyzf4w + umask 022 + cd /builddir/build/BUILD + cd system-config-printer-1.5.15 + /usr/bin/rm -rf /builddir/build/BUILDROOT/system-config-printer-1.5.15-2.el8.x86_64 + exit 0 Child return code was: 0