Name: libssh2 Version: 1.11.0 Release: 1%{?dist} Summary: A library implementing the SSH2 protocol License: BSD-3-Clause URL: https://www.libssh2.org/ Source0: https://libssh2.org/download/libssh2-%{version}.tar.gz Source1: https://libssh2.org/download/libssh2-%{version}.tar.gz.asc # Daniel Stenberg's GPG keys; linked from https://daniel.haxx.se/address.html Source2: https://daniel.haxx.se/mykey.asc Patch1: libssh2-1.11.0-strict-modes.patch Patch2: libssh2-1.11.0-ssh-rsa-test.patch BuildRequires: coreutils BuildRequires: findutils BuildRequires: gcc BuildRequires: gnupg2 BuildRequires: make BuildRequires: openssl-devel > 1:1.0.2 BuildRequires: pkgconfig BuildRequires: sed BuildRequires: zlib-devel BuildRequires: /usr/bin/man # Test suite requirements # Full groff (not just groff-base) needed for the mansyntax check BuildRequires: groff # We run the OpenSSH server and try to connect to it BuildRequires: openssh-server # Need a valid locale to run the mansyntax check %if 0%{?fedora} > 23 || 0%{?rhel} > 7 BuildRequires: glibc-langpack-en %endif %description libssh2 is a library implementing the SSH2 protocol as defined by Internet Drafts: SECSH-TRANS(22), SECSH-USERAUTH(25), SECSH-CONNECTION(23), SECSH-ARCH(20), SECSH-FILEXFER(06)*, SECSH-DHGEX(04), and SECSH-NUMBERS(10). %package devel Summary: Development files for libssh2 Requires: %{name}%{?_isa} = %{version}-%{release} Requires: pkgconfig %description devel The libssh2-devel package contains libraries and header files for developing applications that use libssh2. %package docs Summary: Documentation for libssh2 Requires: %{name} = %{version}-%{release} BuildArch: noarch %description docs The libssh2-docs package contains man pages and examples for developing applications that use libssh2. %prep %{gpgverify} --keyring='%{SOURCE2}' --signature='%{SOURCE1}' --data='%{SOURCE0}' %setup -q # Group-writeable directories in the hierarchy above where we # run the tests from can cause failures due to openssh's strict # permissions checks. Adding this option helps the tests to run # more reliably on a variety of build systems. %patch -P 1 # In 8.8 OpenSSH disabled sha1 rsa-sha keys out of the box, # so we need to re-enable them as a workaround for the test # suite until upstream updates the tests. # See: https://github.com/libssh2/libssh2/issues/630 %if 0%{?fedora} > 33 || 0%{?rhel} > 8 %patch -P 2 %endif # Replace hard wired port number in the test suite to avoid collisions # between 32-bit and 64-bit builds running on a single build-host sed -i s/4711/47%{?__isa_bits}/ tests/{openssh_fixture.c,test_ssh{2.c,d.test}} %build # Test suite fails to compile if we use --disable-static # https://github.com/libssh2/libssh2/issues/1056 %configure \ --disable-silent-rules \ --enable-shared \ --disable-docker-tests %{make_build} %install %{make_install} INSTALL="install -p" find %{buildroot} -name '*.la' -delete # Remove static library that we only built for testing rm -v %{buildroot}%{_libdir}/libssh2.a # Clean things up a bit for packaging make -C example clean find example/ -type f \ '(' -name '*.am' -o -name '*.in' -o -name CMakeLists.txt ')' \ -print -delete # Remove redundant references to libdir in pkg-config file sed -i -e 's|-L%{_libdir} ||g' \ -e 's|-L[$]{libdir} ||g' %{buildroot}%{_libdir}/pkgconfig/libssh2.pc # Avoid multilib conflict on libssh2-devel mv -v example example.%{_arch} %check LC_ALL=en_US.UTF-8 make -C tests check %ldconfig_scriptlets %files %license COPYING %doc docs/AUTHORS README RELEASE-NOTES %{_libdir}/libssh2.so.1 %{_libdir}/libssh2.so.1.* %files docs %doc docs/BINDINGS.md docs/HACKING.md docs/TODO NEWS %{_mandir}/man3/libssh2_*.3* %files devel %doc example.%{_arch}/ %{_includedir}/libssh2.h %{_includedir}/libssh2_publickey.h %{_includedir}/libssh2_sftp.h %{_libdir}/libssh2.so %{_libdir}/pkgconfig/libssh2.pc %changelog * Thu Jun 1 2023 Paul Howarth - 1.11.0-1 - Update to 1.11.0 (rhbz#2211200) - Adds support for encrypt-then-mac (ETM) MACs - Adds support for AES-GCM crypto protocols - Adds support for sk-ecdsa-sha2-nistp256 and sk-ssh-ed25519 keys - Adds support for RSA certificate authentication - Adds FIDO support with *_sk() functions - Adds RSA-SHA2 key upgrading to OpenSSL, WinCNG, mbedTLS, OS400 backends - Adds Agent Forwarding and libssh2_agent_sign() - Adds support for Channel Signal message libssh2_channel_signal_ex() - Adds support to get the user auth banner message libssh2_userauth_banner() - Adds LIBSSH2_NO_{MD5, HMAC_RIPEMD, DSA, RSA, RSA_SHA1, ECDSA, ED25519, AES_CBC, AES_CTR, BLOWFISH, RC4, CAST, 3DES} options - Adds direct stream UNIX sockets with libssh2_channel_direct_streamlocal_ex() - Adds wolfSSL support to CMake file - Adds mbedTLS 3.x support - Adds LibreSSL 3.5 support - Adds support for CMake "unity" builds - Adds CMake support for building shared and static libs in a single pass - Adds symbol hiding support to CMake - Adds support for libssh2.rc for all build tools - Adds .zip, .tar.xz and .tar.bz2 release tarballs - Enables ed25519 key support for LibreSSL 3.7.0 or higher - Improves OpenSSL 1.1 and 3 compatibility - Now requires OpenSSL 1.0.2 or newer - Now requires CMake 3.1 or newer - SFTP: Adds libssh2_sftp_open_ex_r() and libssh2_sftp_open_r() extended APIs - SFTP: No longer has a packet limit when reading a directory - SFTP: Now parses attribute extensions if they exist - SFTP: No longer will busy loop if SFTP fails to initialize - SFTP: Now clear various errors as expected - SFTP: No longer skips files if the line buffer is too small - SCP: Add option to not quote paths - SCP: Enables 64-bit offset support unconditionally - Now skips leading \r and \n characters in banner_receive() - Enables secure memory zeroing with all build tools on all platforms - No longer logs SSH_MSG_REQUEST_FAILURE packets from keepalive - Speed up base64 encoding by 7x - Assert if there is an attempt to write a value that is too large - WinCNG: fix memory leak in _libssh2_dh_secret() - Added protection against possible null pointer dereferences - Agent now handles overly large comment lengths - Now ensure KEX replies don't include extra bytes - Fixed possible buffer overflow when receiving SSH_MSG_USERAUTH_BANNER - Fixed possible buffer overflow in keyboard interactive code path - Fixed overlapping memcpy() - Fixed Windows UWP builds - Fixed DLL import name - Renamed local RANDOM_PADDING macro to avoid unexpected define on Windows - Support for building with gcc versions older than 8 - Improvements to CMake, Makefile, NMakefile, GNUmakefile, autoreconf files - Restores ANSI C89 compliance - Enabled new compiler warnings and fixed/silenced them - Improved error messages - Now uses CIFuzz - Numerous minor code improvements - Improvements to CI builds - Improvements to unit tests - Improvements to doc files - Improvements to example files - Removed "old gex" build option - Removed no-encryption/no-mac builds - Removed support for NetWare and Watcom wmake build files - Avoid use of deprecated patch syntax - Build static library but don't package it since it's required for the test suite (https://github.com/libssh2/libssh2/issues/1056) - Remove redundant references to %%{_libdir} from pkgconfig file - Add patch to work around strict permissions issues for sshd tests * Thu Jan 19 2023 Fedora Release Engineering - 1.10.0-7 - Rebuilt for https://fedoraproject.org/wiki/Fedora_38_Mass_Rebuild * Fri Oct 28 2022 Todd Zullinger - 1.10.0-6 - Verify upstream release signatures * Thu Jul 21 2022 Fedora Release Engineering - 1.10.0-5 - Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild * Sun Jan 23 2022 Paul Howarth - 1.10.0-4 - In 8.8 OpenSSH disabled sha1 rsa-sha keys out of the box, so we need to re-enable them as a workaround for the test suite until upstream updates the tests See: https://github.com/libssh2/libssh2/issues/630 - Drop other test workarounds, none of them being needed any longer * Thu Jan 20 2022 Fedora Release Engineering - 1.10.0-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Tue Sep 14 2021 Sahana Prasad - 1.10.0-2 - Rebuilt with OpenSSL 3.0.0 * Mon Aug 30 2021 Paul Howarth - 1.10.0-1 - Update to 1.10.0 - Adds agent forwarding support - Adds OpenSSH Agent support on Windows - Adds ECDSA key support using the Mbed TLS backend - Adds ECDSA cert authentication - Adds diffie-hellman-group14-sha256, diffie-hellman-group16-sha512, diffie-hellman-group18-sha512 key exchanges - Adds support for PKIX key reading when using ed25519 with OpenSSL - Adds support for EWOULDBLOCK on VMS systems - Adds support for building with OpenSSL 3 - Adds support for using FIPS mode in OpenSSL - Adds debug symbols when building with MSVC - Adds support for building on the 3DS - Adds unicode build support on Windows - Restores os400 building - Increases min, max and opt Diffie Hellman group values - Improves portability of the make file - Improves timeout behaviour with 2FA keyboard auth - Various improvements to the Wincng backend - Fixes reading partial packet replies when using an agent - Fixes Diffie Hellman key exchange on Windows 1903+ builds - Fixes building tests with older versions of OpenSSL - Fixes possible multiple definition warnings - Fixes potential cast issues _libssh2_ecdsa_key_get_curve_type() - Fixes potential use after free if libssh2_init() is called twice - Improved linking when using Mbed TLS - Fixes call to libssh2_crypto_exit() if crypto hasn't been initialized - Fixes crash when loading public keys with no id - Fixes possible out of bounds read when exchanging keys - Fixes possible out of bounds read when reading packets - Fixes possible out of bounds read when opening an X11 connection - Fixes possible out of bounds read when ecdh host keys - Fixes possible hang when trying to read a disconnected socket - Fixes a crash when using the delayed compression option - Fixes read error with large known host entries - Fixes various warnings - Fixes various small memory leaks - Improved error handling, various detailed errors will now be reported - Builds are now using OSS-Fuzz - Builds now use autoreconf instead of a custom build script - cmake now respects install directory - Improved CI backend - Updated HACKING-CRYPTO documentation - Use markdown file extensions - Improved unit tests * Thu Jul 22 2021 Fedora Release Engineering - 1.9.0-8 - Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild * Tue Jan 26 2021 Fedora Release Engineering - 1.9.0-7 - Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild * Tue Jul 28 2020 Fedora Release Engineering - 1.9.0-6 - Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild * Fri Mar 27 2020 Paul Howarth - 1.9.0-5 - Switch to https:// upstream URLs - Full groff (not just groff-base) needed for the mansyntax check * Wed Jan 29 2020 Fedora Release Engineering - 1.9.0-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild * Wed Oct 30 2019 Kamil Dudka - 1.9.0-3 - Fix integer overflow in SSH_MSG_DISCONNECT logic (CVE-2019-17498) * Thu Jul 25 2019 Fedora Release Engineering - 1.9.0-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild * Thu Jun 20 2019 Paul Howarth - 1.9.0-1 - Update to 1.9.0 - Fixed integer overflow leading to out-of-bounds read (CVE-2019-13115) - Adds ECDSA keys and host key support when using OpenSSL - Adds ED25519 key and host key support when using OpenSSL 1.1.1 - Adds OpenSSH style key file reading - Adds AES CTR mode support when using WinCNG - Adds PEM passphrase protected file support for libgcrypt and WinCNG - Adds SHA256 hostkey fingerprint - Adds libssh2_agent_get_identity_path() and libssh2_agent_set_identity_path() - Adds explicit zeroing of sensitive data in memory - Adds additional bounds checks to network buffer reads - Adds the ability to use the server default permissions when creating sftp directories - Adds support for building with OpenSSL no engine flag - Adds support for building with LibreSSL - Increased sftp packet size to 256k - Fixed oversized packet handling in sftp - Fixed building with OpenSSL 1.1 - Fixed a possible crash if sftp stat gets an unexpected response - Fixed incorrect parsing of the KEX preference string value - Fixed conditional RSA and AES-CTR support - Fixed a small memory leak during the key exchange process - Fixed a possible memory leak of the ssh banner string - Fixed various small memory leaks in the backends - Fixed possible out of bounds read when parsing public keys from the server - Fixed possible out of bounds read when parsing invalid PEM files - No longer null terminates the scp remote exec command - Now handle errors when Diffie Hellman key pair generation fails - Fixed compiling on Windows with the flag STDCALL=ON - Improved building instructions - Improved unit tests - Needs OpenSSL ≥ 1.0.1 now as ECC support is assumed - Modernize spec somewhat as EL-6 can no longer be supported * Tue Mar 26 2019 Paul Howarth - 1.8.2-1 - Update to 1.8.2 - Fixed the misapplied userauth patch that broke 1.8.1 - Moved the MAX size declarations from the public header * Tue Mar 19 2019 Paul Howarth - 1.8.1-1 - Update to 1.8.1 - Fixed possible integer overflow when reading a specially crafted packet (CVE-2019-3855) - Fixed possible integer overflow in userauth_keyboard_interactive with a number of extremely long prompt strings (CVE-2019-3863) - Fixed possible integer overflow if the server sent an extremely large number of keyboard prompts (CVE-2019-3856) - Fixed possible out of bounds read when processing a specially crafted packet (CVE-2019-3861) - Fixed possible integer overflow when receiving a specially crafted exit signal message channel packet (CVE-2019-3857) - Fixed possible out of bounds read when receiving a specially crafted exit status message channel packet (CVE-2019-3862) - Fixed possible zero byte allocation when reading a specially crafted SFTP packet (CVE-2019-3858) - Fixed possible out of bounds reads when processing specially crafted SFTP packets (CVE-2019-3860) - Fixed possible out of bounds reads in _libssh2_packet_require(v) (CVE-2019-3859) - Fix mis-applied patch in the fix of CVE-2019-3859 - https://github.com/libssh2/libssh2/issues/325 - https://github.com/libssh2/libssh2/pull/327 * Mon Feb 4 2019 Paul Howarth - 1.8.0-10 - Explicitly run the test suite in the en_US.UTF-8 locale to work around flaky locale settings in mock builders * Fri Feb 01 2019 Fedora Release Engineering - 1.8.0-9 - Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild * Fri Jul 13 2018 Fedora Release Engineering - 1.8.0-8 - Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild * Wed Feb 07 2018 Fedora Release Engineering - 1.8.0-7 - Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild * Sat Feb 03 2018 Igor Gnatenko - 1.8.0-6 - Switch to %%ldconfig_scriptlets * Tue Sep 12 2017 Paul Howarth - 1.8.0-5 - scp: Do not NUL-terminate the command for remote exec (#1489736, GH#208) - Make devel package dependency on main package arch-specific - Drop EL-5 support - noarch sub-packages always available now - Drop legacy Group: and BuildRoot: tags - Drop explicit buildroot cleaning - %%{__isa_bits} always defined now * Thu Aug 03 2017 Fedora Release Engineering - 1.8.0-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild * Wed Jul 26 2017 Fedora Release Engineering - 1.8.0-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild * Fri Feb 10 2017 Fedora Release Engineering - 1.8.0-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild * Tue Oct 25 2016 Paul Howarth - 1.8.0-1 - Update to 1.8.0 - Added a basic dockerised test suite - crypto: Add support for the mbedTLS backend - See RELEASE-NOTES for details of bug fixes * Thu Oct 20 2016 Kamil Dudka - 1.7.0-7 - Make curl test-suite work again with valgrind enabled * Tue Oct 11 2016 Tomáš Mráz - 1.7.0-6 - Rebuild with OpenSSL 1.1.0 * Sun Mar 6 2016 Paul Howarth - 1.7.0-5 - Revert parts of previous change that broke EL-5 compatibility - Include NEWS in docs package, it's much more than RELEASE-NOTES * Sat Mar 5 2016 Peter Robinson - 1.7.0-4 - Modernise spec (no we really don't care about el4/fc4) - Don't ship ChangeLog/NEWS, duplicates of RELEASE-NOTES * Wed Feb 24 2016 Paul Howarth - 1.7.0-3 - Drop UTF-8 patch, which breaks things rather than fixes them * Wed Feb 24 2016 Kamil Dudka - 1.7.0-2 - diffie_hellman_sha1: Convert bytes to bits (additional fix for CVE-2016-0787) * Tue Feb 23 2016 Paul Howarth - 1.7.0-1 - Update to 1.7.0 - diffie_hellman_sha256: Convert bytes to bits (CVE-2016-0787); see http://www.libssh2.org/adv_20160223.html - libssh2_session_set_last_error: Add function - See RELEASE-NOTES for details of bug fixes * Thu Feb 04 2016 Fedora Release Engineering - 1.6.0-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild * Tue Nov 10 2015 Paul Howarth - 1.6.0-3 - Fix pkg-config --libs output (#1279966) * Wed Jun 17 2015 Fedora Release Engineering - 1.6.0-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild * Sun Jun 14 2015 Paul Howarth - 1.6.0-1 - Update to 1.6.0 - Added CMake build system - Added libssh2_userauth_publickey_frommemory() - See RELEASE-NOTES for details of bug fixes * Wed Mar 11 2015 Paul Howarth - 1.5.0-1 - Update to 1.5.0 - See RELEASE-NOTES for details of bug fixes and enhancements - Security Advisory for CVE-2015-1782, using SSH_MSG_KEXINIT data unbounded * Fri Oct 10 2014 Kamil Dudka 1.4.3-16 - prevent a not-connected agent from closing STDIN (#1147717) * Sun Aug 17 2014 Fedora Release Engineering - 1.4.3-15 - Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild * Fri Jul 18 2014 Tom Callaway - 1.4.3-14 - fix license handling * Sat Jun 07 2014 Fedora Release Engineering - 1.4.3-13 - Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild * Wed Apr 30 2014 Kamil Dudka 1.4.3-12 - Fix curl's excessive memory consumption during scp download * Mon Feb 17 2014 Paul Howarth - 1.4.3-11 - The aarch64 buildroot seems to have the same locale issue as the PPC one * Mon Feb 17 2014 Karsten Hopp 1.4.3-10 - Next attempt to work around a self check problem on PPC* * Mon Feb 17 2014 Karsten Hopp 1.4.3-9 - Skip self checks on ppc* * Wed Aug 14 2013 Kamil Dudka 1.4.3-8 - Fix very slow sftp upload to localhost - Fix a use after free in channel.c * Sat Aug 03 2013 Fedora Release Engineering - 1.4.3-7 - Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild * Tue Apr 9 2013 Paul Howarth 1.4.3-6 - Revert 'Modernize the spec file' so as to retain EL-5 spec compatibility * Tue Apr 9 2013 Richard W.M. Jones 1.4.3-5 - Add three patches from upstream git required for qemu ssh block driver - Modernize the spec file: * Remove BuildRoot * Remove Group * Remove clean section * Don't need to clean up buildroot before installing * Wed Apr 3 2013 Paul Howarth 1.4.3-4 - Avoid polluting libssh2.pc with linker options (#947813) * Tue Mar 26 2013 Kamil Dudka 1.4.3-3 - Avoid collisions between 32-bit and 64-bit builds running on a single build host * Thu Feb 14 2013 Fedora Release Engineering - 1.4.3-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild * Wed Nov 28 2012 Paul Howarth 1.4.3-1 - Update to 1.4.3 - compression: add support for zlib@openssh.com - sftp_read: return error if a too large package arrives - libssh2_hostkey_hash.3: update the description of return value - Fixed MSVC NMakefile - examples: use stderr for messages, stdout for data - openssl: do not leak memory when handling errors - improved handling of disabled MD5 algorithm in OpenSSL - known_hosts: Fail when parsing unknown keys in known_hosts file - configure: gcrypt doesn't come with pkg-config support - session_free: wrong variable used for keeping state - libssh2_userauth_publickey_fromfile_ex.3: mention publickey == NULL - comp_method_zlib_decomp: handle Z_BUF_ERROR when inflating - Drop upstreamed patches * Wed Nov 07 2012 Kamil Dudka 1.4.2-4 - examples: use stderr for messages, stdout for data (upstream commit b31e35ab) - Update libssh2_hostkey_hash(3) man page (upstream commit fe8f3deb) * Wed Sep 26 2012 Kamil Dudka 1.4.2-3 - Fix basic functionality of libssh2 in FIPS mode - Skip SELinux-related quirks on recent distros to prevent a test-suite failure * Thu Jul 19 2012 Fedora Release Engineering - 1.4.2-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild * Sun May 20 2012 Paul Howarth 1.4.2-1 - Update to 1.4.2 - Return LIBSSH2_ERROR_SOCKET_DISCONNECT on EOF when reading banner - userauth.c: fread() from public key file to correctly detect any errors - configure.ac: add option to disable build of the example applications - added 'Requires.private:' line to libssh2.pc - SFTP: filter off incoming "zombie" responses - gettimeofday: no need for a replacement under cygwin - SSH_MSG_CHANNEL_REQUEST: default to want_reply - win32/libssh2_config.h: remove hardcoded #define LIBSSH2_HAVE_ZLIB * Fri Apr 27 2012 Paul Howarth 1.4.1-2 - Fix multi-arch conflict again (#816969) * Thu Apr 5 2012 Paul Howarth 1.4.1-1 - Update to 1.4.1 - Build error with gcrypt backend - Always do "forced" window updates to avoid corner case stalls - aes: the init function fails when OpenSSL has AES support - transport_send: finish in-progress key exchange before sending data - channel_write: acknowledge transport errors - examples/x11.c: make sure sizeof passed to read operation is correct - examples/x11.c: fix suspicious sizeof usage - sftp_packet_add: verify the packet before accepting it - SFTP: preserve the original error code more - sftp_packet_read: adjust window size as necessary - Use safer snprintf rather then sprintf in several places - Define and use LIBSSH2_INVALID_SOCKET instead of INVALID_SOCKET - sftp_write: cannot return acked data *and* EAGAIN - sftp_read: avoid data *and* EAGAIN - libssh2.h: add missing prototype for libssh2_session_banner_set() - Drop upstream patches now included in release tarball * Mon Mar 19 2012 Kamil Dudka 1.4.0-4 - Don't ignore transport errors when writing to channel (#804150) * Sun Mar 18 2012 Paul Howarth 1.4.0-3 - Don't try to use openssl's AES-CTR functions (http://www.libssh2.org/mail/libssh2-devel-archive-2012-03/0111.shtml) * Fri Mar 16 2012 Paul Howarth 1.4.0-2 - fix libssh2 failing key re-exchange when write channel is saturated (#804156) - drop %%defattr, redundant since rpm 4.4 * Wed Feb 1 2012 Paul Howarth 1.4.0-1 - update to 1.4.0 - added libssh2_session_supported_algs() - added libssh2_session_banner_get() - added libssh2_sftp_get_channel() - libssh2.h: bump the default window size to 256K - sftp-seek: clear EOF flag - userauth: provide more informations if ssh pub key extraction fails - ssh2_exec: skip error outputs for EAGAIN - LIBSSH2_SFTP_PACKET_MAXLEN: increase to 80000 - knownhost_check(): don't dereference ext if NULL is passed - knownhost_add: avoid dereferencing uninitialized memory on error path - OpenSSL EVP: fix threaded use of structs - _libssh2_channel_read: react on errors from receive_window_adjust - sftp_read: cap the read ahead maximum amount - _libssh2_channel_read: fix non-blocking window adjusting - add upstream patch fixing undefined function reference in libgcrypt backend - BR: /usr/bin/man for test suite * Sun Jan 15 2012 Peter Robinson 1.3.0-4 - skip the ssh test on ARM too * Fri Jan 13 2012 Paul Howarth 1.3.0-3 - make docs package noarch where possible - example includes arch-specific bits, so move to devel package - use patch rather than scripted iconv to fix character encoding - don't make assumptions about SELinux context types used for the ssh server in the test suite - skip the ssh test if /dev/tty isn't present, as in some versions of mock - make the %%files list more explicit - use tabs for indentation * Fri Jan 13 2012 Fedora Release Engineering 1.3.0-2 - rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild * Thu Sep 08 2011 Kamil Dudka 1.3.0-1 - update to 1.3.0 * Sat Jun 25 2011 Dennis Gilmore 1.2.7-2 - sshd/loopback test fails in the sparc buildsystem * Tue Oct 12 2010 Kamil Dudka 1.2.7-1 - update to 1.2.7 (#632916) - avoid multilib conflict on libssh2-docs - avoid build failure in mock with SELinux in the enforcing mode (#558964) * Fri Mar 12 2010 Chris Weyl 1.2.4-1 - update to 1.2.4 - drop old patch0 - be more aggressive about keeping .deps from intruding into -docs * Wed Jan 20 2010 Chris Weyl 1.2.2-5 - pkgconfig dep should be with -devel, not -docs * Mon Jan 18 2010 Chris Weyl 1.2.2-4 - enable tests; conditionalize sshd test, which fails with a funky SElinux error when run locally * Mon Jan 18 2010 Chris Weyl 1.2.2-3 - patch w/1aba38cd7d2658146675ce1737e5090f879f306; not yet in a GA release * Thu Jan 14 2010 Chris Weyl 1.2.2-2 - correct bad file entry under -devel * Thu Jan 14 2010 Chris Weyl 1.2.2-1 - update to 1.2.2 - drop old patch now in upstream - add new pkgconfig file to -devel * Mon Sep 21 2009 Chris Weyl 1.2-2 - patch based on 683aa0f6b52fb1014873c961709102b5006372fc - disable tests (*sigh*) * Tue Aug 25 2009 Chris Weyl 1.2-1 - update to 1.2 * Fri Aug 21 2009 Tomas Mraz - 1.0-4 - rebuilt with new openssl * Sat Jul 25 2009 Fedora Release Engineering - 1.0-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild * Wed Feb 25 2009 Fedora Release Engineering - 1.0-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild * Mon Feb 16 2009 Chris Weyl 1.0-1 - update to 1.0 * Sat Jan 17 2009 Tomas Mraz - 0.18-8 - rebuild with new openssl * Mon Feb 18 2008 Fedora Release Engineering - 0.18-7 - Autorebuild for GCC 4.3 * Wed Dec 05 2007 Chris Weyl 0.18-6 - rebuild for new openssl... * Tue Nov 27 2007 Chris Weyl 0.18-5 - bump * Tue Nov 27 2007 Chris Weyl 0.18-4 - add INSTALL arg to make install vs env. var * Mon Nov 26 2007 Chris Weyl 0.18-3 - run tests; don't package test * Sun Nov 18 2007 Chris Weyl 0.18-2 - split docs into -docs (they seemed... large.) * Tue Nov 13 2007 Chris Weyl 0.18-1 - update to 0.18 * Sun Oct 14 2007 Chris Weyl 0.17-1 - update to 0.17 - many spec file changes * Wed May 23 2007 Sindre Pedersen Bjørdal - 0.15-0.2.20070506 - Fix release tag - Move manpages to -devel package - Add Examples dir to -devel package * Sun May 06 2007 Sindre Pedersen Bjørdal - 0.15-0.20070506.1 - Initial build