# All Global changes to build and install go here.
# Per the below section about __spec_install_pre, any rpm
# environment changes that affect %%install need to go
# here before the %%install macro is pre-built.

# Disable LTO in userspace packages.
%global _lto_cflags %{nil}

# Option to enable compiling with clang instead of gcc.
%bcond_with toolchain_clang

%if %{with toolchain_clang}
%global toolchain clang
%endif

# Compile the kernel with LTO (only supported when building with clang).
%bcond_with clang_lto

%if %{with clang_lto} && %{without toolchain_clang}
{error:clang_lto requires --with toolchain_clang}
%endif

# Cross compile on copr for arm
# See https://bugzilla.redhat.com/1879599
%if 0%{?_with_cross_arm:1}
%global _target_cpu armv7hl
%global _arch arm
%global _build_arch arm
%global _with_cross    1
%endif

# RPM macros strip everything in BUILDROOT, either with __strip
# or find-debuginfo.sh. Make use of __spec_install_post override
# and save/restore binaries we want to package as unstripped.
%define buildroot_unstripped %{_builddir}/root_unstripped
%define buildroot_save_unstripped() \
(cd %{buildroot}; cp -rav --parents -t %{buildroot_unstripped}/ %1 || true) \
%{nil}
%define __restore_unstripped_root_post \
    echo "Restoring unstripped artefacts %{buildroot_unstripped} -> %{buildroot}" \
    cp -rav %{buildroot_unstripped}/. %{buildroot}/ \
%{nil}

# The kernel's %%install section is special
# Normally the %%install section starts by cleaning up the BUILD_ROOT
# like so:
#
# %%__spec_install_pre %%{___build_pre}\
#     [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf "${RPM_BUILD_ROOT}"\
#     mkdir -p `dirname "$RPM_BUILD_ROOT"`\
#     mkdir "$RPM_BUILD_ROOT"\
# %%{nil}
#
# But because of kernel variants, the %%build section, specifically
# BuildKernel(), moves each variant to its final destination as the
# variant is built.  This violates the expectation of the %%install
# section.  As a result we snapshot the current env variables and
# purposely leave out the removal section.  All global wide changes
# should be added above this line otherwise the %%install section
# will not see them.
%global __spec_install_pre %{___build_pre}

# Replace '-' with '_' where needed so that variants can use '-' in
# their name.
%define uname_suffix %{lua:
	local flavour = rpm.expand('%{?1:+%{1}}')
	flavour = flavour:gsub('-', '_')
	if flavour ~= '' then
		print(flavour)
	end
}

# This returns the main kernel tied to a debug variant. For example,
# kernel-debug is the debug version of kernel, so we return an empty
# string. However, kernel-64k-debug is the debug version of kernel-64k,
# in this case we need to return "64k", and so on. This is used in
# macros below where we need this for some uname based requires.
%define uname_variant %{lua:
	local flavour = rpm.expand('%{?1:%{1}}')
	_, _, main, sub = flavour:find("(%w+)-(.*)")
	if main then
		print("+" .. main)
	end
}


# At the time of this writing (2019-03), RHEL8 packages use w2.xzdio
# compression for rpms (xz, level 2).
# Kernel has several large (hundreds of mbytes) rpms, they take ~5 mins
# to compress by single-threaded xz. Switch to threaded compression,
# and from level 2 to 3 to keep compressed sizes close to "w2" results.
#
# NB: if default compression in /usr/lib/rpm/redhat/macros ever changes,
# this one might need tweaking (e.g. if default changes to w3.xzdio,
# change below to w4T.xzdio):
#
# This is disabled on i686 as it triggers oom errors

%ifnarch i686
%define _binary_payload w3T.xzdio
%endif

Summary: The Linux kernel
%if 0%{?fedora}
%define secure_boot_arch x86_64
%else
%define secure_boot_arch x86_64 aarch64 s390x ppc64le
%endif

# Signing for secure boot authentication
%ifarch %{secure_boot_arch}
%global signkernel 1
%else
%global signkernel 0
%endif

# Sign modules on all arches
%global signmodules 1

# Compress modules only for architectures that build modules
%ifarch noarch
%global zipmodules 0
%else
%global zipmodules 1
%endif

%ifarch x86_64
%global efiuki 1
%else
%global efiuki 0
%endif

# Default compression algorithm
%global compression xz
%global compression_flags --compress
%global compext xz
%if %{zipmodules}
%global zipsed -e 's/\.ko$/\.ko.%compext/'
# for parallel xz processes, replace with 1 to go back to single process
%endif

%if 0%{?fedora}
%define primary_target fedora
%else
%define primary_target rhel
%endif

#
# genspec.sh variables
#

# Include Fedora files
%global include_fedora 0
# Include RHEL files
%global include_rhel 1
# Provide Patchlist.changelog file
%global patchlist_changelog 0
# Set debugbuildsenabled to 1 to build separate base and debug kernels
#  (on supported architectures). The kernel-debug-* subpackages will
#  contain the debug kernel.
# Set debugbuildsenabled to 0 to not build a separate debug kernel, but
#  to build the base kernel using the debug configuration. (Specifying
#  the --with-release option overrides this setting.)
%define debugbuildsenabled 1
%define buildid .rk35x
%define specversion 5.14.0
%define patchversion 5.14
%define pkgrelease 508.rk35x
%define kversion 5
%define tarfile_release 5.14.0-508.rk35x.el9
# This is needed to do merge window version magic
%define patchlevel 14
# This allows pkg_release to have configurable %%{?dist} tag
%define specrelease 508%{?buildid}%{?dist}
# This defines the kabi tarball version
%define kabiversion 5.14.0-508.rk35x.el9

#
# End of genspec.sh variables
#

%define pkg_release %{specrelease}

# libexec dir is not used by the linker, so the shared object there
# should not be exported to RPM provides
%global __provides_exclude_from ^%{_libexecdir}/kselftests

# The following build options are enabled by default, but may become disabled
# by later architecture-specific checks. These can also be disabled by using
# --without <opt> in the rpmbuild command, or by forcing these values to 0.
#
# standard kernel
%define with_up        %{?_without_up:        0} %{?!_without_up:        1}
# kernel PAE (only valid for ARM (lpae))
%define with_pae       %{?_without_pae:       0} %{?!_without_pae:       1}
# kernel-debug
%define with_debug     %{?_without_debug:     0} %{?!_without_debug:     1}
# kernel-zfcpdump (s390 specific kernel for zfcpdump)
%define with_zfcpdump  %{?_without_zfcpdump:  0} %{?!_without_zfcpdump:  1}
# kernel-64k (aarch64 kernel with 64K page_size)
%define with_arm64_64k %{?_without_arm64_64k: 0} %{?!_without_arm64_64k: 1}
# kernel-rt (x86_64 and aarch64 only PREEMPT_RT enabled kernel)
%define with_realtime  %{?_without_realtime:  0} %{?!_without_realtime:  1}
# kernel-doc
%define with_doc       %{?_without_doc:       0} %{?!_without_doc:       1}
# kernel-headers
%define with_headers   %{?_without_headers:   0} %{?!_without_headers:   1}
%define with_cross_headers   %{?_without_cross_headers:   0} %{?!_without_cross_headers:   1}
# perf
%define with_perf      %{?_without_perf:      0} %{?!_without_perf:      1}
# tools
%define with_tools     %{?_without_tools:     0} %{?!_without_tools:     1}
# bpf tool
%define with_bpftool   %{?_without_bpftool:   0} %{?!_without_bpftool:   1}
# kernel-debuginfo
%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
# kernel-abi-stablelists
%define with_kernel_abi_stablelists %{?_without_kernel_abi_stablelists: 0} %{?!_without_kernel_abi_stablelists: 1}
# internal samples and selftests
%define with_selftests %{?_without_selftests: 0} %{?!_without_selftests: 1}
#
# Additional options for user-friendly one-off kernel building:
#
# Only build the base kernel (--with baseonly):
%define with_baseonly  %{?_with_baseonly:     1} %{?!_with_baseonly:     0}
# Only build the pae kernel (--with paeonly):
%define with_paeonly   %{?_with_paeonly:      1} %{?!_with_paeonly:      0}
# Only build the debug kernel (--with dbgonly):
%define with_dbgonly   %{?_with_dbgonly:      1} %{?!_with_dbgonly:      0}
# Only build the realtime kernel (--with rtonly):
%define with_rtonly    %{?_with_rtonly:       1} %{?!_with_rtonly:       0}
# Control whether we perform a compat. check against published ABI.
%define with_kabichk   %{?_without_kabichk:   0} %{?!_without_kabichk:   1}
# Temporarily disable kabi checks until RC.
%define with_kabichk 0
# Control whether we perform a compat. check against DUP ABI.
%define with_kabidupchk %{?_with_kabidupchk:  1} %{?!_with_kabidupchk:   0}
#
# Control whether to run an extensive DWARF based kABI check.
# Note that this option needs to have baseline setup in SOURCE300.
%define with_kabidwchk %{?_without_kabidwchk: 0} %{?!_without_kabidwchk: 1}
%define with_kabidw_base %{?_with_kabidw_base: 1} %{?!_with_kabidw_base: 0}
#
# Control whether to install the vdso directories.
%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
#
# should we do C=1 builds with sparse
%define with_sparse    %{?_with_sparse:       1} %{?!_with_sparse:       0}
#
# Cross compile requested?
%define with_cross    %{?_with_cross:         1} %{?!_with_cross:        0}
#
# build a release kernel on rawhide
%define with_release   %{?_with_release:      1} %{?!_with_release:      0}

# verbose build, i.e. no silent rules and V=1
%define with_verbose %{?_with_verbose:        1} %{?!_with_verbose:      0}

#
# check for mismatched config options
%define with_configchecks %{?_without_configchecks:        0} %{?!_without_configchecks:        1}

#
# gcov support
%define with_gcov %{?_with_gcov:1}%{?!_with_gcov:0}

#
# ipa_clone support
%define with_ipaclones %{?_without_ipaclones: 0} %{?!_without_ipaclones: 1}

# Want to build a vanilla kernel build without any non-upstream patches?
%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}

%if 0%{?fedora}
# Kernel headers are being split out into a separate package
%define with_headers 0
%define with_cross_headers 0
# no ipa_clone for now
%define with_ipaclones 0
# no stablelist
%define with_kernel_abi_stablelists 0
# Fedora builds these separately
%define with_perf 0
%define with_tools 0
%define with_bpftool 0
%endif

%if %{with_verbose}
%define make_opts V=1
%else
%define make_opts -s
%endif

%if %{with toolchain_clang}
%ifarch s390x ppc64le
%global llvm_ias 0
%else
%global llvm_ias 1
%endif
%global clang_make_opts HOSTCC=clang CC=clang LLVM_IAS=%{llvm_ias}
%if %{with clang_lto}
%global clang_make_opts %{clang_make_opts} LD=ld.lld HOSTLD=ld.lld AR=llvm-ar NM=llvm-nm HOSTAR=llvm-ar HOSTNM=llvm-nm
%endif
%global make_opts %{make_opts} %{clang_make_opts}
# clang does not support the -fdump-ipa-clones option
%global with_ipaclones 0
%endif

# turn off debug kernel and kabichk for gcov builds
%if %{with_gcov}
%define with_debug 0
%define with_kabichk 0
%define with_kabidupchk 0
%define with_kabidwchk 0
%define with_kabidw_base 0
%define with_kernel_abi_stablelists 0
%endif

# turn off kABI DWARF-based check if we're generating the base dataset
%if %{with_kabidw_base}
%define with_kabidwchk 0
%endif

# kpatch_kcflags are extra compiler flags applied to base kernel
# -fdump-ipa-clones is enabled only for base kernels on selected arches
%if %{with_ipaclones}
%ifarch x86_64 ppc64le
%define kpatch_kcflags -fdump-ipa-clones
%else
%define with_ipaclones 0
%endif
%endif

%define make_target bzImage
%define image_install_path boot

%define KVERREL %{version}-%{release}.%{_target_cpu}
%define KVERREL_RE %(echo %KVERREL | sed 's/+/[+]/g')
%define hdrarch %_target_cpu
%define asmarch %_target_cpu

%if 0%{!?nopatches:1}
%define nopatches 0
%endif

%if %{with_vanilla}
%define nopatches 1
%endif

%if %{with_release}
%define debugbuildsenabled 1
%endif

%if !%{with_debuginfo}
%define _enable_debug_packages 0
%endif
%define debuginfodir /usr/lib/debug
# Needed because we override almost everything involving build-ids
# and debuginfo generation. Currently we rely on the old alldebug setting.
%global _build_id_links alldebug

# kernel PAE is only built on ARMv7
%ifnarch armv7hl
%define with_pae 0
%endif

# RT kernel is only built on x86_64 and aarch64
%ifnarch x86_64 aarch64
%define with_realtime 0
%endif

# if requested, only build base kernel
%if %{with_baseonly}
%define with_pae 0
%define with_debug 0
%define with_realtime 0
%define with_vdso_install 0
%define with_perf 0
%define with_tools 0
%define with_bpftool 0
%define with_kernel_abi_stablelists 0
%define with_selftests 0
%define with_cross 0
%define with_cross_headers 0
%define with_ipaclones 0
%endif

# if requested, only build pae kernel
%if %{with_paeonly}
%define with_up 0
%define with_debug 0
%define with_realtime 0
%endif

# if requested, only build debug kernel
%if %{with_dbgonly}
%define with_up 0
%define with_realtime 0
%define with_vdso_install 0
%define with_perf 0
%define with_tools 0
%define with_bpftool 0
%define with_kernel_abi_stablelists 0
%define with_selftests 0
%define with_cross 0
%define with_cross_headers 0
%define with_ipaclones 0
%endif

# if requested, only build realtime kernel
%if %{with_rtonly}
%define with_up 0
%define with_pae 0
%define with_debug 0
%define with_vdso_install 0
%define with_perf 0
%define with_tools 0
%define with_bpftool 0
%define with_kernel_abi_stablelists 0
%define with_selftests 0
%define with_cross 0
%define with_cross_headers 0
%define with_ipaclones 0
%endif

# turn off kABI DUP check and DWARF-based check if kABI check is disabled
%if !%{with_kabichk}
%define with_kabidupchk 0
%define with_kabidwchk 0
%endif

%if %{with_vdso_install}
%define use_vdso 1
%endif

# selftests require bpftool to be built.  If bpftools is disabled, then disable selftests
%if %{with_bpftool} == 0
%define with_selftests 0
%endif

%ifnarch noarch
%define with_kernel_abi_stablelists 0
%endif

# Overrides for generic default options

# only package docs noarch
%ifnarch noarch
%define with_doc 0
%define doc_build_fail true
%endif

%if 0%{?fedora}
# don't do debug builds on anything but i686 and x86_64
%ifnarch i686 x86_64
%define with_debug 0
%endif
%endif

# don't build noarch kernels or headers (duh)
%ifarch noarch
%define with_up 0
%define with_realtime 0
%define with_headers 0
%define with_cross_headers 0
%define with_tools 0
%define with_perf 0
%define with_bpftool 0
%define with_selftests 0
%define with_debug 0
%define all_arch_configs kernel-%{version}-*.config
%endif

# sparse blows up on ppc
%ifnarch ppc64le
%define with_sparse 0
%endif

# zfcpdump mechanism is s390 only
%ifnarch s390x
%define with_zfcpdump 0
%endif

# 64k variant only for aarch64
%ifnarch aarch64
%define with_arm64_64k 0
%endif

%if 0%{?fedora}
# This is not for Fedora
%define with_zfcpdump 0
%endif

# Per-arch tweaks

%ifarch i686
%define asmarch x86
%define hdrarch i386
%define all_arch_configs kernel-%{version}-i?86*.config
%define kernel_image arch/x86/boot/bzImage
%endif

%ifarch x86_64
%define asmarch x86
%define all_arch_configs kernel-%{version}-x86_64*.config
%define kernel_image arch/x86/boot/bzImage
%endif

%ifarch ppc64le
%define asmarch powerpc
%define hdrarch powerpc
%define make_target vmlinux
%define kernel_image vmlinux
%define kernel_image_elf 1
%define use_vdso 0
%define all_arch_configs kernel-%{version}-ppc64le*.config
%endif

%ifarch s390x
%define asmarch s390
%define hdrarch s390
%define all_arch_configs kernel-%{version}-s390x.config
%define kernel_image arch/s390/boot/bzImage
%define vmlinux_decompressor arch/s390/boot/compressed/vmlinux
%endif

%ifarch %{arm}
%define all_arch_configs kernel-%{version}-arm*.config
%define skip_nonpae_vdso 1
%define asmarch arm
%define hdrarch arm
%define make_target bzImage
%define kernel_image arch/arm/boot/zImage
# http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html
%define kernel_mflags KALLSYMS_EXTRA_PASS=1
# we only build headers/perf/tools on the base arm arches
# just like we used to only build them on i386 for x86
%ifnarch armv7hl
%define with_headers 0
%define with_cross_headers 0
%endif
# These currently don't compile on armv7
%define with_selftests 0
%endif

%ifarch aarch64
%define all_arch_configs kernel-%{version}-aarch64*.config
%define asmarch arm64
%define hdrarch arm64
%define make_target vmlinuz.efi
%define kernel_image arch/arm64/boot/vmlinuz.efi
%endif

# Should make listnewconfig fail if there's config options
# printed out?
%if %{nopatches}
%define with_configchecks 0
%endif

# To temporarily exclude an architecture from being built, add it to
# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
# don't build kernel-headers then the new build system will no longer let
# us use the previous build of that package -- it'll just be completely AWOL.
# Which is a BadThing(tm).

# We only build kernel-headers on the following...
%if 0%{?fedora}
%define nobuildarches i386
%else
%define nobuildarches i386 i686 %{arm}
%endif

%ifarch %nobuildarches
# disable BuildKernel commands
%define with_up 0
%define with_debug 0
%define with_pae 0
%define with_zfcpdump 0
%define with_arm64_64k 0
%define with_realtime 0

%define with_debuginfo 0
%define with_perf 0
%define with_tools 0
%define with_bpftool 0
%define with_selftests 0
%define _enable_debug_packages 0
%endif

# Architectures we build tools/cpupower on
%if 0%{?fedora}
%define cpupowerarchs %{ix86} x86_64 ppc64le %{arm} aarch64
%else
%define cpupowerarchs i686 x86_64 ppc64le aarch64
%endif

%if 0%{?use_vdso}

%if 0%{?skip_nonpae_vdso}
%define _use_vdso 0
%else
%define _use_vdso 1
%endif

%else
%define _use_vdso 0
%endif

# If build of debug packages is disabled, we need to know if we want to create
# meta debug packages or not, after we define with_debug for all specific cases
# above. So this must be at the end here, after all cases of with_debug or not.
%define with_debug_meta 0
%if !%{debugbuildsenabled}
%if %{with_debug}
%define with_debug_meta 1
%endif
%define with_debug 0
%endif


#
# Packages that need to be installed before the kernel is, because the %%post
# scripts use them.
#
%define kernel_prereq  coreutils, systemd >= 203-2, /usr/bin/kernel-install
%define initrd_prereq  dracut >= 027


Name: kernel
License: ((GPL-2.0-only WITH Linux-syscall-note) OR BSD-2-Clause) AND ((GPL-2.0-only WITH Linux-syscall-note) OR BSD-3-Clause) AND ((GPL-2.0-only WITH Linux-syscall-note) OR CDDL-1.0) AND ((GPL-2.0-only WITH Linux-syscall-note) OR Linux-OpenIB) AND ((GPL-2.0-only WITH Linux-syscall-note) OR MIT) AND ((GPL-2.0-or-later WITH Linux-syscall-note) OR BSD-3-Clause) AND ((GPL-2.0-or-later WITH Linux-syscall-note) OR MIT) AND Apache-2.0 AND BSD-2-Clause AND BSD-3-Clause AND BSD-3-Clause-Clear AND GFDL-1.1-no-invariants-or-later AND GPL-1.0-or-later AND (GPL-1.0-or-later OR BSD-3-Clause) AND (GPL-1.0-or-later WITH Linux-syscall-note) AND GPL-2.0-only AND (GPL-2.0-only OR Apache-2.0) AND (GPL-2.0-only OR BSD-2-Clause) AND (GPL-2.0-only OR BSD-3-Clause) AND (GPL-2.0-only OR CDDL-1.0) AND (GPL-2.0-only OR GFDL-1.1-no-invariants-or-later) AND (GPL-2.0-only OR GFDL-1.2-no-invariants-only) AND (GPL-2.0-only WITH Linux-syscall-note) AND GPL-2.0-or-later AND (GPL-2.0-or-later OR BSD-2-Clause) AND (GPL-2.0-or-later OR BSD-3-Clause) AND (GPL-2.0-or-later OR CC-BY-4.0) AND (GPL-2.0-or-later WITH GCC-exception-2.0) AND (GPL-2.0-or-later WITH Linux-syscall-note) AND ISC AND LGPL-2.0-or-later AND (LGPL-2.0-or-later OR BSD-2-Clause) AND (LGPL-2.0-or-later WITH Linux-syscall-note) AND LGPL-2.1-only AND (LGPL-2.1-only OR BSD-2-Clause) AND (LGPL-2.1-only WITH Linux-syscall-note) AND LGPL-2.1-or-later AND (LGPL-2.1-or-later WITH Linux-syscall-note) AND (Linux-OpenIB OR GPL-2.0-only) AND (Linux-OpenIB OR GPL-2.0-only OR BSD-2-Clause) AND Linux-man-pages-copyleft AND MIT AND (MIT OR GPL-2.0-only) AND (MIT OR GPL-2.0-or-later) AND (MIT OR LGPL-2.1-only) AND (MPL-1.1 OR GPL-2.0-only) AND (X11 OR GPL-2.0-only) AND (X11 OR GPL-2.0-or-later) AND Zlib
URL: https://www.kernel.org/
Version: %{specversion}
Release: %{pkg_release}
# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
# SET %%nobuildarches (ABOVE) INSTEAD
%if 0%{?fedora}
ExclusiveArch: noarch x86_64 s390x %{arm} aarch64 ppc64le
%else
ExclusiveArch: noarch i386 i686 x86_64 s390x %{arm} aarch64 ppc64le
%endif
ExclusiveOS: Linux
%ifnarch %{nobuildarches}
Requires: kernel-core-uname-r = %{KVERREL}
Requires: kernel-modules-uname-r = %{KVERREL}
Requires: kernel-modules-core-uname-r = %{KVERREL}
Provides: installonlypkg(kernel)
%endif


#
# List the packages used during the kernel build
#
BuildRequires: kmod, bash, coreutils, tar, git-core, which
BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk, %compression
BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex, gcc-c++
BuildRequires: net-tools, hostname, bc, elfutils-devel
BuildRequires: dwarves
BuildRequires: python3-devel
BuildRequires: gcc-plugin-devel
BuildRequires: kernel-rpm-macros >= 185-9
# glibc-static is required for a consistent build environment (specifically
# CONFIG_CC_CAN_LINK_STATIC=y).
BuildRequires: glibc-static
%if %{with_headers}
BuildRequires: rsync
%endif
%if %{with_doc}
BuildRequires: xmlto, asciidoc, python3-sphinx, python3-sphinx_rtd_theme, python3-pyyaml
%endif
%if %{with_sparse}
BuildRequires: sparse
%endif
%if %{with_perf}
BuildRequires: zlib-devel binutils-devel newt-devel perl(ExtUtils::Embed) bison flex xz-devel
BuildRequires: audit-libs-devel python3-setuptools
BuildRequires: java-devel
BuildRequires: libbpf-devel >= 0.6.0-1
BuildRequires: libbabeltrace-devel
BuildRequires: libtraceevent-devel
%ifnarch %{arm} s390x
BuildRequires: numactl-devel
%endif
%ifarch aarch64
BuildRequires: opencsd-devel >= 1.2.1
%endif
%endif
%if %{with_tools}
BuildRequires: gettext ncurses-devel
BuildRequires: libcap-devel libcap-ng-devel
# The following are rtla requirements
BuildRequires: python3-docutils
BuildRequires: libtraceevent-devel
BuildRequires: libtracefs-devel

%ifnarch s390x
BuildRequires: pciutils-devel
%endif
%ifarch i686 x86_64
BuildRequires: libnl3-devel
%endif
%endif
%if %{with_tools} || %{signmodules} || %{signkernel}
BuildRequires: openssl-devel
%endif
%if %{with_bpftool}
BuildRequires: python3-docutils
BuildRequires: zlib-devel binutils-devel
%endif
%if %{with_selftests}
BuildRequires: clang llvm fuse-devel
%ifarch x86_64
BuildRequires: lld
%endif
%ifnarch %{arm}
BuildRequires: numactl-devel
%endif
BuildRequires: libcap-devel libcap-ng-devel rsync libmnl-devel
%endif
BuildConflicts: rhbuildsys(DiskFree) < 500Mb
%if %{with_debuginfo}
BuildRequires: rpm-build, elfutils
BuildConflicts: rpm < 4.13.0.1-19
BuildConflicts: dwarves < 1.13
# Most of these should be enabled after more investigation
%undefine _include_minidebuginfo
%undefine _find_debuginfo_dwz_opts
%undefine _unique_build_ids
%undefine _unique_debug_names
%undefine _unique_debug_srcs
%undefine _debugsource_packages
%undefine _debuginfo_subpackages
# Remove -q option below to provide 'extracting debug info' messages
%global _find_debuginfo_opts -r -q
%global _missing_build_ids_terminate_build 1
%global _no_recompute_build_ids 1
%endif
%if %{with_kabidwchk} || %{with_kabidw_base}
BuildRequires: kabi-dw
%endif

%if %{signkernel}%{signmodules}
BuildRequires: openssl
%if %{signkernel}
# ELN uses Fedora signing process, so exclude
%if 0%{?rhel}%{?centos} && !0%{?eln}
BuildRequires: system-sb-certs
%endif
%ifarch x86_64 aarch64
BuildRequires: nss-tools
BuildRequires: pesign >= 0.10-4
%endif
%endif
%endif

%if %{with_cross}
BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu
%define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu-
%define __strip %{_build_arch}-linux-gnu-strip
%endif

# These below are required to build man pages
%if %{with_perf}
BuildRequires: xmlto
%endif
%if %{with_perf} || %{with_tools}
BuildRequires: asciidoc
%endif

%if %{with toolchain_clang}
BuildRequires: clang
%endif

%if %{with clang_lto}
BuildRequires: llvm
BuildRequires: lld
%endif

%if %{efiuki}
BuildRequires: dracut >= 057-51.git20231114.el9
# For dracut UEFI uki binaries
BuildRequires: binutils
# For the initrd
BuildRequires: lvm2
# For systemd-stub
BuildRequires: systemd-boot-unsigned
# For systemd-pcrphase
BuildRequires: systemd-udev >= 252-1
# For UKI kernel cmdline addons
BuildRequires: systemd-ukify
# For TPM operations in UKI initramfs
BuildRequires: tpm2-tools
# For Azure CVM specific udev rules
BuildRequires: WALinuxAgent-cvm
# For UKI sb cert
%if 0%{?centos}
BuildRequires: centos-sb-certs >= 9.0-23
%else
BuildRequires: redhat-sb-certs >= 9.4-0.1
%endif
%endif

# Because this is the kernel, it's hard to get a single upstream URL
# to represent the base without needing to do a bunch of patching. This
# tarball is generated from a src-git tree. If you want to see the
# exact git commit you can run
#
# xzcat -qq ${TARBALL} | git get-tar-commit-id
Source0: linux-%{tarfile_release}.tar.xz

Source1: Makefile.rhelver
Source2: kernel.changelog

%if %{signkernel}

# Name of the packaged file containing signing key
%ifarch ppc64le
%define signing_key_filename kernel-signing-ppc.cer
%endif
%ifarch s390x
%define signing_key_filename kernel-signing-s390.cer
%endif

%define secureboot_ca_0 %{_datadir}/pki/sb-certs/secureboot-ca-%{_arch}.cer
%define secureboot_key_0 %{_datadir}/pki/sb-certs/secureboot-kernel-%{_arch}.cer

%if 0%{?centos}
%define pesign_name_0 centossecureboot201
%else
%ifarch x86_64 aarch64
%define pesign_name_0 redhatsecureboot501
%endif
%ifarch s390x
%define pesign_name_0 redhatsecureboot302
%endif
%ifarch ppc64le
%define pesign_name_0 redhatsecureboot701
%endif
%endif

# signkernel
%endif

Source20: mod-denylist.sh
Source21: mod-sign.sh
Source22: parallel_xz.sh

%define modsign_cmd %{SOURCE21}

%if 0%{?include_rhel}
Source23: x509.genkey.rhel

Source24: kernel-aarch64-rhel.config
Source25: kernel-aarch64-debug-rhel.config
Source26: mod-extra.list.rhel

Source27: kernel-ppc64le-rhel.config
Source28: kernel-ppc64le-debug-rhel.config
Source29: kernel-s390x-rhel.config
Source30: kernel-s390x-debug-rhel.config
Source31: kernel-s390x-zfcpdump-rhel.config
Source32: kernel-x86_64-rhel.config
Source33: kernel-x86_64-debug-rhel.config

Source34: filter-x86_64.sh.rhel
Source35: filter-armv7hl.sh.rhel
Source37: filter-aarch64.sh.rhel
Source38: filter-ppc64le.sh.rhel
Source39: filter-s390x.sh.rhel
Source40: filter-modules.sh.rhel

Source41: x509.genkey.centos
# ARM64 64K page-size kernel config
Source42: kernel-aarch64-64k-rhel.config
Source43: kernel-aarch64-64k-debug-rhel.config

Source44: kernel-x86_64-rt-rhel.config
Source45: kernel-x86_64-rt-debug-rhel.config
Source46: kernel-aarch64-rt-rhel.config
Source47: kernel-aarch64-rt-debug-rhel.config
%endif

%if 0%{?include_fedora}
Source50: x509.genkey.fedora
Source51: mod-extra.list.fedora

Source52: kernel-aarch64-fedora.config
Source53: kernel-aarch64-debug-fedora.config
Source54: kernel-armv7hl-fedora.config
Source55: kernel-armv7hl-debug-fedora.config
Source56: kernel-armv7hl-lpae-fedora.config
Source57: kernel-armv7hl-lpae-debug-fedora.config
Source60: kernel-ppc64le-fedora.config
Source61: kernel-ppc64le-debug-fedora.config
Source62: kernel-s390x-fedora.config
Source63: kernel-s390x-debug-fedora.config
Source64: kernel-x86_64-fedora.config
Source65: kernel-x86_64-debug-fedora.config

Source67: filter-x86_64.sh.fedora
Source68: filter-armv7hl.sh.fedora
Source70: filter-aarch64.sh.fedora
Source71: filter-ppc64le.sh.fedora
Source72: filter-s390x.sh.fedora
Source73: filter-modules.sh.fedora
%endif

Source75: partial-kgcov-snip.config
Source80: generate_all_configs.sh
Source81: process_configs.sh

Source82: update_scripts.sh

Source84: mod-internal.list
Source85: mod-partner.list
Source86: mod-kvm.list

Source100: rheldup3.x509
Source101: rhelkpatch1.x509
Source102: rhelimaca1.x509
Source103: rhelima.x509
Source104: rhelima_centos.x509
Source105: nvidiagpuoot001.x509

%if 0%{?centos}
%define ima_signing_cert %{SOURCE104}
%else
%define ima_signing_cert %{SOURCE103}
%endif

%define ima_cert_name ima.cer

Source150: dracut-virt.conf

Source151: uki_create_addons.py
Source152: uki_addons.json

Source200: check-kabi

Source201: Module.kabi_aarch64
Source202: Module.kabi_ppc64le
Source203: Module.kabi_s390x
Source204: Module.kabi_x86_64

Source210: Module.kabi_dup_aarch64
Source211: Module.kabi_dup_ppc64le
Source212: Module.kabi_dup_s390x
Source213: Module.kabi_dup_x86_64

Source300: kernel-abi-stablelists-%{kabiversion}.tar.bz2
Source301: kernel-kabi-dw-%{kabiversion}.tar.bz2

# Sources for kernel-tools
Source2000: cpupower.service
Source2001: cpupower.config
Source2002: kvm_stat.logrotate

# Some people enjoy building customized kernels from the dist-git in Fedora and
# use this to override configuration options. One day they may all use the
# source tree, but in the mean time we carry this to support the legacy workflow
Source3000: merge.pl
Source3001: kernel-local
%if %{patchlist_changelog}
Source3002: Patchlist.changelog
%endif

Source4000: README.rst
Source4001: rpminspect.yaml
Source4002: gating.yaml

## Patches needed for building this package

%if !%{nopatches}

Patch1: patch-%{patchversion}-redhat.patch
%endif

# empty final patch to facilitate testing of kernel patches
Patch999999: linux-kernel-test.patch

# END OF PATCH DEFINITIONS

%description
The kernel meta package

#
# This macro does requires, provides, conflicts, obsoletes for a kernel package.
#	%%kernel_reqprovconf [-o] <subpackage>
# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
# macros defined above.
#
%define kernel_reqprovconf(o) \
%if %{-o:0}%{!-o:1}\
Provides: kernel = %{specversion}-%{pkg_release}\
%endif\
Provides: kernel-%{_target_cpu} = %{specversion}-%{pkg_release}%{uname_suffix %{?1:%{1}}}\
Provides: kernel-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Requires: kernel%{?1:-%{1}}-modules-core-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Requires(pre): %{kernel_prereq}\
Requires(pre): %{initrd_prereq}\
Requires(pre): ((linux-firmware >= 20150904-56.git6ebf5d57) if linux-firmware)\
Recommends: linux-firmware\
Requires(preun): systemd >= 200\
Conflicts: xfsprogs < 4.3.0-1\
Conflicts: xorg-x11-drv-vmmouse < 13.0.99\
%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
# We can't let RPM do the dependencies automatic because it'll then pick up\
# a correct but undesirable perl dependency from the module headers which\
# isn't required for the kernel proper to function\
AutoReq: no\
AutoProv: yes\
%{nil}


%package doc
Summary: Various documentation bits found in the kernel source
Group: Documentation
%description doc
This package contains documentation files from the kernel
source. Various bits of information about the Linux kernel and the
device drivers shipped with it are documented in these files.

You'll want to install this package if you need a reference to the
options that can be passed to Linux kernel modules at load time.


%package headers
Summary: Header files for the Linux kernel for use by glibc
Obsoletes: glibc-kernheaders < 3.0-46
Provides: glibc-kernheaders = 3.0-46
%description headers
Kernel-headers includes the C header files that specify the interface
between the Linux kernel and userspace libraries and programs.  The
header files define structures and constants that are needed for
building most standard programs and are also needed for rebuilding the
glibc package.

%package cross-headers
Summary: Header files for the Linux kernel for use by cross-glibc
%description cross-headers
Kernel-cross-headers includes the C header files that specify the interface
between the Linux kernel and userspace libraries and programs.  The
header files define structures and constants that are needed for
building most standard programs and are also needed for rebuilding the
cross-glibc package.


%package debuginfo-common-%{_target_cpu}
Summary: Kernel source files used by %{name}-debuginfo packages
Provides: installonlypkg(kernel)
%description debuginfo-common-%{_target_cpu}
This package is required by %{name}-debuginfo subpackages.
It provides the kernel source files common to all builds.

%if %{with_perf}
%package -n perf
Summary: Performance monitoring for the Linux kernel
Requires: bzip2
%description -n perf
This package contains the perf tool, which enables performance monitoring
of the Linux kernel.

%package -n perf-debuginfo
Summary: Debug information for package perf
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
AutoReqProv: no
%description -n perf-debuginfo
This package provides debug information for the perf package.

# Note that this pattern only works right to match the .build-id
# symlinks because of the trailing nonmatching alternation and
# the leading .*, because of find-debuginfo.sh's buggy handling
# of matching the pattern against the symlinks file.
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list}

%package -n python3-perf
Summary: Python bindings for apps which will manipulate perf events
%description -n python3-perf
The python3-perf package contains a module that permits applications
written in the Python programming language to use the interface
to manipulate perf events.

%package -n python3-perf-debuginfo
Summary: Debug information for package perf python bindings
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
AutoReqProv: no
%description -n python3-perf-debuginfo
This package provides debug information for the perf python bindings.

# the python_sitearch macro should already be defined from above
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{python3_sitearch}/perf.*so(\.debug)?|XXX' -o python3-perf-debuginfo.list}

%package -n libperf
Summary: The perf library from kernel source
%description -n libperf
This package contains the kernel source perf library.

%package -n libperf-devel
Summary: Developement files for the perf library from kernel source
Requires: libperf = %{version}-%{release}
%description -n libperf-devel
This package includes libraries and header files needed for development
of applications which use perf library from kernel source.

%package -n libperf-debuginfo
Summary: Debug information for package libperf
Group: Development/Debug
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
AutoReqProv: no
%description -n libperf-debuginfo
This package provides debug information for the libperf package.

# Note that this pattern only works right to match the .build-id
# symlinks because of the trailing nonmatching alternation and
# the leading .*, because of find-debuginfo.sh's buggy handling
# of matching the pattern against the symlinks file.
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libdir}/libperf.so.*(\.debug)?|XXX' -o libperf-debuginfo.list}

# with_perf
%endif

%if %{with_tools}
%package -n kernel-tools
Summary: Assortment of tools for the Linux kernel
%ifarch %{cpupowerarchs}
Provides:  cpupowerutils = 1:009-0.6.p1
Obsoletes: cpupowerutils < 1:009-0.6.p1
Provides:  cpufreq-utils = 1:009-0.6.p1
Provides:  cpufrequtils = 1:009-0.6.p1
Obsoletes: cpufreq-utils < 1:009-0.6.p1
Obsoletes: cpufrequtils < 1:009-0.6.p1
Obsoletes: cpuspeed < 1:1.5-16
Requires: kernel-tools-libs = %{version}-%{release}
%endif
%define __requires_exclude ^%{_bindir}/python
%description -n kernel-tools
This package contains the tools/ directory from the kernel source
and the supporting documentation.

%package -n kernel-tools-libs
Summary: Libraries for the kernels-tools
%description -n kernel-tools-libs
This package contains the libraries built from the tools/ directory
from the kernel source.

%package -n kernel-tools-libs-devel
Summary: Assortment of tools for the Linux kernel
Requires: kernel-tools = %{version}-%{release}
%ifarch %{cpupowerarchs}
Provides:  cpupowerutils-devel = 1:009-0.6.p1
Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
%endif
Requires: kernel-tools-libs = %{version}-%{release}
Provides: kernel-tools-devel
%description -n kernel-tools-libs-devel
This package contains the development files for the tools/ directory from
the kernel source.

%package -n kernel-tools-debuginfo
Summary: Debug information for package kernel-tools
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
AutoReqProv: no
%description -n kernel-tools-debuginfo
This package provides debug information for package kernel-tools.

# Note that this pattern only works right to match the .build-id
# symlinks because of the trailing nonmatching alternation and
# the leading .*, because of find-debuginfo.sh's buggy handling
# of matching the pattern against the symlinks file.
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/gpio-watch(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|.*%%{_bindir}/intel-speed-select(\.debug)?|.*%%{_bindir}/page_owner_sort(\.debug)?|.*%%{_bindir}/slabinfo(\.debug)?|.*%%{_sbindir}/intel_sdsi(\.debug)?|XXX' -o kernel-tools-debuginfo.list}

%package -n rtla
Summary: Real-Time Linux Analysis tools
Requires: libtraceevent
Requires: libtracefs
%description -n rtla
The rtla meta-tool includes a set of commands that aims to analyze
the real-time properties of Linux. Instead of testing Linux as a black box,
rtla leverages kernel tracing capabilities to provide precise information
about the properties and root causes of unexpected results.

%package -n rv
Summary: RV: Runtime Verification
%description -n rv
Runtime Verification (RV) is a lightweight (yet rigorous) method that
complements classical exhaustive verification techniques (such as model
checking and theorem proving) with a more practical approach for
complex systems.
The rv tool is the interface for a collection of monitors that aim
analysing the logical and timing behavior of Linux.

# with_tools
%endif

%if %{with_bpftool}

%define bpftoolversion 7.4.0

%package -n bpftool
Summary: Inspection and simple manipulation of eBPF programs and maps
Version: %{bpftoolversion}
%description -n bpftool
This package contains the bpftool, which allows inspection and simple
manipulation of eBPF programs and maps.

%package -n bpftool-debuginfo
Summary: Debug information for package bpftool
Version: %{bpftoolversion}
Group: Development/Debug
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{specversion}-%{release}
AutoReqProv: no
%description -n bpftool-debuginfo
This package provides debug information for the bpftool package.

%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_sbindir}/bpftool(\.debug)?|XXX' -o bpftool-debuginfo.list}

# Setting "Version:" above overrides the internal {version} macro,
# need to restore it here
%define version %{specversion}

# with_bpftool
%endif

%if %{with_selftests}

%package selftests-internal
Summary: Kernel samples and selftests
Requires: binutils, bpftool, iproute-tc, nmap-ncat, python3, fuse-libs, keyutils
%description selftests-internal
Kernel sample programs and selftests.

# Note that this pattern only works right to match the .build-id
# symlinks because of the trailing nonmatching alternation and
# the leading .*, because of find-debuginfo.sh's buggy handling
# of matching the pattern against the symlinks file.
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libexecdir}/(ksamples|kselftests)/.*|XXX' -o selftests-debuginfo.list}

%define __requires_exclude ^liburandom_read.so.*$

# with_selftests
%endif

%define kernel_gcov_package() \
%package %{?1:%{1}-}gcov\
Summary: gcov graph and source files for coverage data collection.\
%description %{?1:%{1}-}gcov\
%{?1:%{1}-}gcov includes the gcov graph and source files for gcov coverage collection.\
%{nil}

%package -n kernel-abi-stablelists
Summary: The Red Hat Enterprise Linux kernel ABI symbol stablelists
AutoReqProv: no
%description -n kernel-abi-stablelists
The kABI package contains information pertaining to the Red Hat Enterprise
Linux kernel ABI, including lists of kernel symbols that are needed by
external Linux kernel modules, and a yum plugin to aid enforcement.

%if %{with_kabidw_base}
%package kernel-kabidw-base-internal
Summary: The baseline dataset for kABI verification using DWARF data
Group: System Environment/Kernel
AutoReqProv: no
%description kernel-kabidw-base-internal
The package contains data describing the current ABI of the Red Hat Enterprise
Linux kernel, suitable for the kabi-dw tool.
%endif

#
# This macro creates a kernel-<subpackage>-debuginfo package.
#	%%kernel_debuginfo_package <subpackage>
#
# Explanation of the find_debuginfo_opts: We build multiple kernels (debug
# pae etc.) so the regex filters those kernels appropriately. We also
# have to package several binaries as part of kernel-devel but getting
# unique build-ids is tricky for these userspace binaries. We don't really
# care about debugging those so we just filter those out and remove it.
%define kernel_debuginfo_package() \
%package %{?1:%{1}-}debuginfo\
Summary: Debug information for package %{name}%{?1:-%{1}}\
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
Provides: installonlypkg(kernel)\
AutoReqProv: no\
%description %{?1:%{1}-}debuginfo\
This package provides debug information for package %{name}%{?1:-%{1}}.\
This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} --keep-section '.BTF' -p '.*\/usr\/src\/kernels/.*|XXX' -o ignored-debuginfo.list -p '/.*/%%{KVERREL_RE}%{?1:[+]%{1}}/.*|/.*%%{KVERREL_RE}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
%{nil}

#
# This macro creates a kernel-<subpackage>-devel package.
#	%%kernel_devel_package [-m] <subpackage> <pretty-name>
#
%define kernel_devel_package(m) \
%package %{?1:%{1}-}devel\
Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
Provides: kernel-devel-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Provides: installonlypkg(kernel)\
AutoReqProv: no\
Requires(pre): findutils\
Requires: findutils\
Requires: perl-interpreter\
Requires: openssl-devel\
Requires: elfutils-libelf-devel\
Requires: bison\
Requires: flex\
Requires: make\
Requires: gcc\
%if %{-m:1}%{!-m:0}\
Requires: kernel-devel-uname-r = %{KVERREL}%{uname_variant %{?1:%{1}}}\
%endif\
%description %{?1:%{1}-}devel\
This package provides kernel headers and makefiles sufficient to build modules\
against the %{?2:%{2} }kernel package.\
%{nil}

#
# This macro creates an empty kernel-<subpackage>-devel-matched package that
# requires both the core and devel packages locked on the same version.
#	%%kernel_devel_matched_package [-m] <subpackage> <pretty-name>
#
%define kernel_devel_matched_package(m) \
%package %{?1:%{1}-}devel-matched\
Summary: Meta package to install matching core and devel packages for a given %{?2:%{2} }kernel\
Requires: kernel%{?1:-%{1}}-devel = %{version}-%{release}\
Requires: kernel%{?1:-%{1}}-core = %{version}-%{release}\
%description %{?1:%{1}-}devel-matched\
This meta package is used to install matching core and devel packages for a given %{?2:%{2} }kernel.\
%{nil}

#
# kernel-<variant>-ipaclones-internal package
#
%define kernel_ipaclones_package() \
%package %{?1:%{1}-}ipaclones-internal\
Summary: *.ipa-clones files generated by -fdump-ipa-clones for kernel%{?1:-%{1}}\
Group: System Environment/Kernel\
AutoReqProv: no\
%description %{?1:%{1}-}ipaclones-internal\
This package provides *.ipa-clones files.\
%{nil}

#
# This macro creates a kernel-<subpackage>-modules-internal package.
#	%%kernel_modules_internal_package <subpackage> <pretty-name>
#
%define kernel_modules_internal_package() \
%package %{?1:%{1}-}modules-internal\
Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
Group: System Environment/Kernel\
Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}\
Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
Provides: kernel%{?1:-%{1}}-modules-internal = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
Provides: installonlypkg(kernel-module)\
Provides: kernel%{?1:-%{1}}-modules-internal-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Requires: kernel-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Requires: kernel%{?1:-%{1}}-modules-core-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
AutoReq: no\
AutoProv: yes\
%description %{?1:%{1}-}modules-internal\
This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat internal usage.\
%{nil}

%if %{with_realtime}
#
# this macro creates a kernel-<subpackage>-kvm package
# %%kernel_kvm_package <subpackage>
#
%define kernel_kvm_package() \
%package %{?1:%{1}-}kvm\
Summary: KVM modules for package kernel%{?1:-%{1}}\
Group: System Environment/Kernel\
Requires: kernel-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Provides: installonlypkg(kernel-module)\
Provides: kernel%{?1:-%{1}}-kvm-%{_target_cpu} = %{version}-%{release}\
AutoReq: no\
%description -n kernel%{?1:-%{1}}-kvm\
This package provides KVM modules for package kernel%{?1:-%{1}}.\
%{nil}
%endif

#
# This macro creates a kernel-<subpackage>-modules-extra package.
#	%%kernel_modules_extra_package [-m] <subpackage> <pretty-name>
#
%define kernel_modules_extra_package(m) \
%package %{?1:%{1}-}modules-extra\
Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\
Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
Provides: installonlypkg(kernel-module)\
Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Requires: kernel-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Requires: kernel%{?1:-%{1}}-modules-core-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
%if %{-m:1}%{!-m:0}\
Requires: kernel-modules-extra-uname-r = %{KVERREL}%{uname_variant %{?1:%{1}}}\
%endif\
AutoReq: no\
AutoProv: yes\
%description %{?1:%{1}-}modules-extra\
This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\
%{nil}

#
# This macro creates a kernel-<subpackage>-modules package.
#	%%kernel_modules_package [-m] <subpackage> <pretty-name>
#
%define kernel_modules_package(m) \
%package %{?1:%{1}-}modules\
Summary: kernel modules to match the %{?2:%{2}-}core kernel\
Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\
Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
Provides: kernel-modules = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
Provides: installonlypkg(kernel-module)\
Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Requires: kernel-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Requires: kernel%{?1:-%{1}}-modules-core-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
%if %{-m:1}%{!-m:0}\
Requires: kernel-modules-uname-r = %{KVERREL}%{uname_variant %{?1:%{1}}}\
%endif\
AutoReq: no\
AutoProv: yes\
%description %{?1:%{1}-}modules\
This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\
%{nil}

#
# This macro creates a kernel-<subpackage>-modules-core package.
#	%%kernel_modules_core_package [-m] <subpackage> <pretty-name>
#
%define kernel_modules_core_package(m) \
%package %{?1:%{1}-}modules-core\
Summary: Core kernel modules to match the %{?2:%{2}-}core kernel\
Provides: kernel%{?1:-%{1}}-modules-core-%{_target_cpu} = %{version}-%{release}\
Provides: kernel-modules-core-%{_target_cpu} = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
Provides: kernel-modules-core = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
Provides: installonlypkg(kernel-module)\
Provides: kernel%{?1:-%{1}}-modules-core-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Requires: kernel-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
%if %{-m:1}%{!-m:0}\
Requires: kernel-modules-core-uname-r = %{KVERREL}%{uname_variant %{?1:%{1}}}\
%endif\
AutoReq: no\
AutoProv: yes\
%description %{?1:%{1}-}modules-core\
This package provides essential kernel modules for the %{?2:%{2}-}core kernel package.\
%{nil}

#
# this macro creates a kernel-<subpackage> meta package.
#	%%kernel_meta_package <subpackage>
#
%define kernel_meta_package() \
%package %{1}\
summary: kernel meta-package for the %{1} kernel\
Requires: kernel-%{1}-core-uname-r = %{KVERREL}%{uname_suffix %{1}}\
Requires: kernel-%{1}-modules-uname-r = %{KVERREL}%{uname_suffix %{1}}\
Requires: kernel-%{1}-modules-core-uname-r = %{KVERREL}%{uname_suffix %{1}}\
%if "%{1}" == "rt" || "%{1}" == "rt-debug"\
Requires: realtime-setup\
%endif\
Provides: installonlypkg(kernel)\
%description %{1}\
The meta-package for the %{1} kernel\
%{nil}

#
# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
#	%%define variant_summary The Linux kernel compiled for <configuration>
#	%%kernel_variant_package [-n <pretty-name>] [-m] [-o] <subpackage>
#
%define kernel_variant_package(n:mo) \
%package %{?1:%{1}-}core\
Summary: %{variant_summary}\
Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Provides: installonlypkg(kernel)\
%if %{-m:1}%{!-m:0}\
Requires: kernel-core-uname-r = %{KVERREL}%{uname_variant %{?1:%{1}}}\
Requires: kernel-%{?1:%{1}-}-modules-core-uname-r = %{KVERREL}%{uname_variant %{?1:%{1}}}\
%endif\
%{expand:%%kernel_reqprovconf %{?1:%{1}} %{-o:%{-o}}}\
%if %{?1:1} %{!?1:0} \
%{expand:%%kernel_meta_package %{?1:%{1}}}\
%endif\
%{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
%{expand:%%kernel_devel_matched_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
%{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
%{expand:%%kernel_modules_core_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
%{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
%if %{-m:0}%{!-m:1}\
%{expand:%%kernel_modules_internal_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
%if 0%{!?fedora:1}\
%{expand:%%kernel_modules_partner_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
%endif\
%{expand:%%kernel_debuginfo_package %{?1:%{1}}}\
%endif\
%if %{efiuki}\
%if "%{1}" != "rt" && "%{1}" != "rt-debug"\
%package %{?1:%{1}-}uki-virt\
Summary: %{variant_summary} unified kernel image for virtual machines\
Provides: installonlypkg(kernel)\
Provides: kernel-%{?1:%{1}-}uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Requires: kernel%{?1:-%{1}}-modules-core-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Requires(pre): %{kernel_prereq}\
Requires(pre): systemd >= 252-20\
%package %{?1:%{1}-}uki-virt-addons\
Summary: %{variant_summary} unified kernel image addons for virtual machines\
Provides: installonlypkg(kernel)\
Requires: kernel%{?1:-%{1}}-uki-virt = %{version}-%{release}\
Requires(pre): systemd >= 252-20\
%endif\
%endif\
%if "%{1}" == "rt" || "%{1}" == "rt-debug"\
%{expand:%%kernel_kvm_package %{?1:%{1}}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
%endif \
%if %{with_gcov}\
%{expand:%%kernel_gcov_package %{?1:%{1}}}\
%endif\
%{nil}

#
# This macro creates a kernel-<subpackage>-modules-partner package.
#	%%kernel_modules_partner_package <subpackage> <pretty-name>
#
%define kernel_modules_partner_package() \
%package %{?1:%{1}-}modules-partner\
Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
Group: System Environment/Kernel\
Provides: kernel%{?1:-%{1}}-modules-partner-%{_target_cpu} = %{version}-%{release}\
Provides: kernel%{?1:-%{1}}-modules-partner-%{_target_cpu} = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
Provides: kernel%{?1:-%{1}}-modules-partner = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
Provides: installonlypkg(kernel-module)\
Provides: kernel%{?1:-%{1}}-modules-partner-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Requires: kernel-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
AutoReq: no\
AutoProv: yes\
%description %{?1:%{1}-}modules-partner\
This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat partners usage.\
%{nil}

# Now, each variant package.

%if %{with_pae}
%define variant_summary The Linux kernel compiled for Cortex-A15
%kernel_variant_package lpae
%description lpae-core
This package includes a version of the Linux kernel with support for
Cortex-A15 devices with LPAE and HW virtualisation support
%endif

%if %{with_zfcpdump}
%define variant_summary The Linux kernel compiled for zfcpdump usage
%kernel_variant_package -o zfcpdump
%description zfcpdump-core
The kernel package contains the Linux kernel (vmlinuz) for use by the
zfcpdump infrastructure.
# with_zfcpdump
%endif

%if %{with_arm64_64k}
%define variant_summary The Linux kernel compiled for 64k pagesize usage
%kernel_variant_package 64k
%description 64k-core
The kernel package contains a variant of the ARM64 Linux kernel using
a 64K page size.
%endif

%if %{with_arm64_64k} && %{with_debug}
%define variant_summary The Linux kernel compiled with extra debugging enabled
%if !%{debugbuildsenabled}
%kernel_variant_package -m 64k-debug
%else
%kernel_variant_package 64k-debug
%endif
%description 64k-debug-core
The debug kernel package contains a variant of the ARM64 Linux kernel using
a 64K page size.
This variant of the kernel has numerous debugging options enabled.
It should only be installed when trying to gather additional information
on kernel bugs, as some of these options impact performance noticably.
%endif

%if %{with_realtime}
%define variant_summary The Linux kernel compiled with PREEMPT_RT enabled
%kernel_variant_package rt
%description rt-core
This package includes a version of the Linux kernel compiled with PREEMPT_RT
(real-time preemption support).
%endif

%if %{with_debug} && %{with_realtime}
%define variant_summary The Linux kernel compiled with PREEMPT_RT enabled
%kernel_variant_package rt-debug
%description rt-debug-core
This package includes a version of the Linux kernel compiled with PREEMPT_RT
(real-time preemption support) and has numerous debugging options enabled.
It should only be installed when trying to gather additional information
on kernel bugs, as some of these options impact performance noticably.
%endif

%if !%{debugbuildsenabled}
%kernel_variant_package -m debug
%else
%kernel_variant_package debug
%endif
%description debug-core
The kernel package contains the Linux kernel (vmlinuz), the core of any
Linux operating system.  The kernel handles the basic functions
of the operating system:  memory allocation, process allocation, device
input and output, etc.

This variant of the kernel has numerous debugging options enabled.
It should only be installed when trying to gather additional information
on kernel bugs, as some of these options impact performance noticably.

# And finally the main -core package

%define variant_summary The Linux kernel
%kernel_variant_package
%description core
The kernel package contains the Linux kernel (vmlinuz), the core of any
Linux operating system.  The kernel handles the basic functions
of the operating system: memory allocation, process allocation, device
input and output, etc.

%if %{efiuki}
%description debug-uki-virt
Prebuilt debug unified kernel image for virtual machines.

%description debug-uki-virt-addons
Prebuilt debug unified kernel image addons for virtual machines.

%description uki-virt
Prebuilt default unified kernel image for virtual machines.

%description uki-virt-addons
Prebuilt default unified kernel image addons for virtual machines.
%endif

%if %{with_ipaclones}
%kernel_ipaclones_package
%endif

%prep
# do a few sanity-checks for --with *only builds
%if %{with_baseonly}
%if !%{with_up}
echo "Cannot build --with baseonly, up build is disabled"
exit 1
%endif
%endif

# more sanity checking; do it quietly
if [ "%{patches}" != "%%{patches}" ] ; then
  for patch in %{patches} ; do
    if [ ! -f $patch ] ; then
      echo "ERROR: Patch  ${patch##/*/}  listed in specfile but is missing"
      exit 1
    fi
  done
fi 2>/dev/null

patch_command='git apply'
ApplyPatch()
{
  local patch=$1
  shift
  if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
    exit 1
  fi
  if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME}.spec ; then
    if [ "${patch:0:8}" != "patch-%{kversion}." ] ; then
      echo "ERROR: Patch  $patch  not listed as a source patch in specfile"
      exit 1
    fi
  fi 2>/dev/null
  case "$patch" in
  *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
  *.gz)  gunzip  < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
  *.xz)  unxz    < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
  *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
  esac
}

# don't apply patch if it's empty
ApplyOptionalPatch()
{
  local patch=$1
  shift
  if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
    exit 1
  fi
  local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
  if [ "$C" -gt 9 ]; then
    ApplyPatch $patch ${1+"$@"}
  fi
}

%setup -q -n kernel-%{tarfile_release} -c
mv linux-%{tarfile_release} linux-%{KVERREL}

cd linux-%{KVERREL}
cp -a %{SOURCE1} .

%if !%{nopatches}

ApplyOptionalPatch patch-%{patchversion}-redhat.patch
%endif

ApplyOptionalPatch linux-kernel-test.patch

# END OF PATCH APPLICATIONS

# Any further pre-build tree manipulations happen here.

chmod +x scripts/checkpatch.pl
mv COPYING COPYING-%{version}-%{release}

# This Prevents scripts/setlocalversion from mucking with our version numbers.
touch .scmversion

# Mangle /usr/bin/python shebangs to /usr/bin/python3
# Mangle all Python shebangs to be Python 3 explicitly
# -p preserves timestamps
# -n prevents creating ~backup files
# -i specifies the interpreter for the shebang
# This fixes errors such as
# *** ERROR: ambiguous python shebang in /usr/bin/kvm_stat: #!/usr/bin/python. Change it to python3 (or python2) explicitly.
# We patch all sources below for which we got a report/error.
pathfix.py -i "%{__python3} %{py3_shbang_opts}" -p -n \
	tools/kvm/kvm_stat/kvm_stat \
	scripts/show_delta \
	scripts/diffconfig \
	scripts/bloat-o-meter \
	scripts/jobserver-exec \
	tools \
	Documentation \
	scripts/clang-tools

# only deal with configs if we are going to build for the arch
%ifnarch %nobuildarches

if [ -L configs ]; then
	rm -f configs
fi
mkdir configs
cd configs

# Drop some necessary files from the source dir into the buildroot
cp $RPM_SOURCE_DIR/kernel-*.config .
cp %{SOURCE80} .
# merge.pl
cp %{SOURCE3000} .
# kernel-local
cp %{SOURCE3001} .
FLAVOR=%{primary_target} SPECVERSION=%{version} ./generate_all_configs.sh %{debugbuildsenabled}

# Merge in any user-provided local config option changes
%ifnarch %nobuildarches
for i in %{all_arch_configs}
do
  mv $i $i.tmp
  ./merge.pl %{SOURCE3001} $i.tmp > $i
%if %{with_gcov}
  echo "Merging with gcov options"
  cat %{SOURCE75}
  mv $i $i.tmp
  ./merge.pl %{SOURCE75} $i.tmp > $i
%endif
  rm $i.tmp
done
%endif

%if %{with clang_lto}
for i in *aarch64*.config *x86_64*.config; do
  sed -i 's/# CONFIG_LTO_CLANG_THIN is not set/CONFIG_LTO_CLANG_THIN=y/' $i
  sed -i 's/CONFIG_LTO_NONE=y/# CONFIG_LTO_NONE is not set/' $i
done
%endif

# Add DUP and kpatch certificates to system trusted keys for RHEL
%if 0%{?rhel}
%if %{signkernel}%{signmodules}
openssl x509 -inform der -in %{SOURCE100} -out rheldup3.pem
openssl x509 -inform der -in %{SOURCE101} -out rhelkpatch1.pem
openssl x509 -inform der -in %{SOURCE102} -out rhelimaca1.pem
openssl x509 -inform der -in %{SOURCE105} -out nvidiagpuoot001.pem
cat rheldup3.pem rhelkpatch1.pem rhelimaca1.pem nvidiagpuoot001.pem > ../certs/rhel.pem
%if %{signkernel}
%ifarch s390x ppc64le
openssl x509 -inform der -in %{secureboot_ca_0} -out secureboot.pem
cat secureboot.pem >> ../certs/rhel.pem
%endif
%endif
for i in *.config; do
  sed -i 's@CONFIG_SYSTEM_TRUSTED_KEYS=""@CONFIG_SYSTEM_TRUSTED_KEYS="certs/rhel.pem"@' $i
done
%endif
%endif

# Adjust FIPS module name for RHEL
%if 0%{?rhel}
for i in *.config; do
  sed -i 's/CONFIG_CRYPTO_FIPS_NAME=.*/CONFIG_CRYPTO_FIPS_NAME="Red Hat Enterprise Linux %{rhel} - Kernel Cryptographic API"/' $i
done
%endif

cp %{SOURCE81} .
OPTS=""
%if %{with_configchecks}
	OPTS="$OPTS -w -n -c"
%endif
%if %{with clang_lto}
for opt in %{clang_make_opts}; do
  OPTS="$OPTS -m $opt"
done
%endif
RHJOBS=$RPM_BUILD_NCPUS PACKAGE_NAME=kernel ./process_configs.sh $OPTS ${specversion}

cp %{SOURCE82} .
RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh %{primary_target}

# We may want to override files from the primary target in case of building
# against a flavour of it (eg. centos not rhel), thus override it here if
# necessary
if [ "%{primary_target}" == "rhel" ]; then
%if 0%{?centos}
  echo "Updating scripts/sources to centos version"
  RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh centos
%else
  echo "Not updating scripts/sources to centos version"
%endif
fi

# end of kernel config
%endif

cd ..
# # End of Configs stuff

# get rid of unwanted files resulting from patch fuzz
find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null

# remove unnecessary SCM files
find . -name .gitignore -delete >/dev/null

cd ..

###
### build
###
%build

rm -rf %{buildroot_unstripped} || true
mkdir -p %{buildroot_unstripped}

%if %{with_sparse}
%define sparse_mflags	C=1
%endif

cp_vmlinux()
{
  eu-strip --remove-comment -o "$2" "$1"
}

# Note we need to disable these flags for cross builds because the flags
# from redhat-rpm-config assume that host == target so target arch
# flags cause issues with the host compiler.
%if !%{with_cross}
%define build_hostcflags  %{?build_cflags}
%define build_hostldflags %{?build_ldflags}
%endif

%define make %{__make} %{?cross_opts} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}"

InitBuildVars() {
    # Initialize the kernel .config file and create some variables that are
    # needed for the actual build process.

    Variant=$1

    # Pick the right kernel config file
    Config=kernel-%{version}-%{_target_cpu}${Variant:+-${Variant}}.config
    DevelDir=/usr/src/kernels/%{KVERREL}${Variant:++${Variant}}

    KernelVer=%{version}-%{release}.%{_target_cpu}${Variant:++${Variant}}

    # make sure EXTRAVERSION says what we want it to say
    # Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters
    ShortRel=$(perl -e "print \"%{release}\" =~ s/\.pr\.[0-9A-Fa-f]{32}//r")
    perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Variant:++${Variant}}/" Makefile

    # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
    # if we are post rc1 this should match anyway so this won't matter
    perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{patchlevel}/' Makefile

    %{make} %{?_smp_mflags} mrproper
    cp configs/$Config .config

    %if %{signkernel}%{signmodules}
    cp configs/x509.genkey certs/.
    %endif

    Arch=`head -1 .config | cut -b 3-`
    echo USING ARCH=$Arch

    KCFLAGS="%{?kcflags}"

    # add kpatch flags for base kernel
    if [ "$Variant" == "" ]; then
        KCFLAGS="$KCFLAGS %{?kpatch_kcflags}"
    fi
}

BuildKernel() {
    MakeTarget=$1
    KernelImage=$2
    DoVDSO=$3
    Variant=$4
    InstallName=${5:-vmlinuz}

    DoModules=1
    if [ "$Variant" = "zfcpdump" ]; then
	    DoModules=0
    fi

    # When the bootable image is just the ELF kernel, strip it.
    # We already copy the unstripped file into the debuginfo package.
    if [ "$KernelImage" = vmlinux ]; then
      CopyKernel=cp_vmlinux
    else
      CopyKernel=cp
    fi

%if %{with_gcov}
    # Make build directory unique for each variant, so that gcno symlinks
    # are also unique for each variant.
    if [ -n "$Variant" ]; then
        ln -s $(pwd) ../linux-%{KVERREL}-${Variant}
    fi
    echo "GCOV - continuing build in: $(pwd)"
    pushd ../linux-%{KVERREL}${Variant:+-${Variant}}
    pwd > ../kernel${Variant:+-${Variant}}-gcov.list
%endif

    InitBuildVars $Variant

    echo BUILDING A KERNEL FOR ${Variant} %{_target_cpu}...

    %{make} ARCH=$Arch olddefconfig >/dev/null

    # This ensures build-ids are unique to allow parallel debuginfo
    perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config
    %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags}
    if [ $DoModules -eq 1 ]; then
	%{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
    fi

    mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
    mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
    mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/systemtap
%if %{with_debuginfo}
    mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
%endif

%ifarch %{arm} aarch64
    %{make} ARCH=$Arch dtbs INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
    %{make} ARCH=$Arch dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
    cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb
    find arch/$Arch/boot/dts -name '*.dtb' -type f -delete
%endif

    # Start installing the results
    install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
    install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config
    install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
    install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map

    # We estimate the size of the initramfs because rpm needs to take this size
    # into consideration when performing disk space calculations. (See bz #530778)
    dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20

    if [ -f arch/$Arch/boot/zImage.stub ]; then
      cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
      cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || :
    fi

    %if %{signkernel}
    if [ "$KernelImage" = vmlinux ]; then
        # We can't strip and sign $KernelImage in place, because
        # we need to preserve original vmlinux for debuginfo.
        # Use a copy for signing.
        $CopyKernel $KernelImage $KernelImage.tosign
        KernelImage=$KernelImage.tosign
        CopyKernel=cp
    fi

    # Sign the image if we're using EFI
    # aarch64 kernels are gziped EFI images
    KernelExtension=${KernelImage##*.}
    if [ "$KernelExtension" == "gz" ]; then
        SignImage=${KernelImage%.*}
    else
        SignImage=$KernelImage
    fi

    %ifarch x86_64 aarch64
    %pesign -s -i $SignImage -o vmlinuz.signed -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0}
    %endif
    %ifarch s390x ppc64le
    if [ -x /usr/bin/rpm-sign ]; then
	rpm-sign --key "%{pesign_name_0}" --lkmsign $SignImage --output vmlinuz.signed
    elif [ "$DoModules" == "1" -a "%{signmodules}" == "1" ]; then
	chmod +x scripts/sign-file
	./scripts/sign-file -p sha256 certs/signing_key.pem certs/signing_key.x509 $SignImage vmlinuz.signed
    else
	mv $SignImage vmlinuz.signed
    fi
    %endif

    if [ ! -s vmlinuz.signed ]; then
        echo "pesigning failed"
        exit 1
    fi
    mv vmlinuz.signed $SignImage
    if [ "$KernelExtension" == "gz" ]; then
        gzip -f9 $SignImage
    fi
    # signkernel
    %endif

    $CopyKernel $KernelImage \
                $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
    chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
    cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName

    # hmac sign the kernel for FIPS
    echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac"
    ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
    (cd $RPM_BUILD_ROOT/%{image_install_path} && sha512hmac $InstallName-$KernelVer) > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac;
    cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac

    if [ $DoModules -eq 1 ]; then
	# Override $(mod-fw) because we don't want it to install any firmware
	# we'll get it from the linux-firmware package and we don't want conflicts
	%{make} %{?_smp_mflags} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT %{?_smp_mflags} modules_install KERNELRELEASE=$KernelVer mod-fw=
    fi

%if %{with_gcov}
    # install gcov-needed files to $BUILDROOT/$BUILD/...:
    #   gcov_info->filename is absolute path
    #   gcno references to sources can use absolute paths (e.g. in out-of-tree builds)
    #   sysfs symlink targets (set up at compile time) use absolute paths to BUILD dir
    find . \( -name '*.gcno' -o -name '*.[chS]' \) -exec install -D '{}' "$RPM_BUILD_ROOT/$(pwd)/{}" \;
%endif

    # add an a noop %%defattr statement 'cause rpm doesn't like empty file list files
    echo '%%defattr(-,-,-)' > ../kernel${Variant:+-${Variant}}-ldsoconf.list
    if [ $DoVDSO -ne 0 ]; then
        %{make} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
        if [ -s ldconfig-kernel.conf ]; then
             install -D -m 444 ldconfig-kernel.conf \
                $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
	     echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Variant:+-${Variant}}-ldsoconf.list
        fi

        rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id
    fi

    # And save the headers/makefiles etc for building modules against
    #
    # This all looks scary, but the end result is supposed to be:
    # * all arch relevant include/ files
    # * all Makefile/Kconfig files
    # * all script/ files

    rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
    mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
    # dirs for additional modules per module-init-tools, kbuild/modules.txt
    mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
    mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/weak-updates
    # CONFIG_KERNEL_HEADER_TEST generates some extra files in the process of
    # testing so just delete
    find . -name *.h.s -delete
    # first copy everything
    cp --parents `find  -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    if [ ! -e Module.symvers ]; then
        touch Module.symvers
    fi
    cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    if [ -s Module.markers ]; then
      cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    fi

    # create the kABI metadata for use in packaging
    # NOTENOTE: the name symvers is used by the rpm backend
    # NOTENOTE: to discover and run the /usr/lib/rpm/fileattrs/kabi.attr
    # NOTENOTE: script which dynamically adds exported kernel symbol
    # NOTENOTE: checksums to the rpm metadata provides list.
    # NOTENOTE: if you change the symvers name, update the backend too
    echo "**** GENERATING kernel ABI metadata ****"
    gzip -c9 < Module.symvers > $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz
    cp $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz $RPM_BUILD_ROOT/lib/modules/$KernelVer/symvers.gz

%if %{with_kabichk}
    echo "**** kABI checking is enabled in kernel SPEC file. ****"
    chmod 0755 $RPM_SOURCE_DIR/check-kabi
    if [ -e $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant ]; then
        cp $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
        $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
        # for now, don't keep it around.
        rm $RPM_BUILD_ROOT/Module.kabi
    else
        echo "**** NOTE: Cannot find reference Module.kabi file. ****"
    fi
%endif

%if %{with_kabidupchk}
    echo "**** kABI DUP checking is enabled in kernel SPEC file. ****"
    if [ -e $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant ]; then
        cp $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
        $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
        # for now, don't keep it around.
        rm $RPM_BUILD_ROOT/Module.kabi
    else
        echo "**** NOTE: Cannot find DUP reference Module.kabi file. ****"
    fi
%endif

%if %{with_kabidw_base}
    # Don't build kabi base for debug kernels
    if [ "$Variant" != "zfcpdump" -a "$Variant" != "debug" ]; then
        mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
        tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf

        mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
        tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists

        echo "**** GENERATING DWARF-based kABI baseline dataset ****"
        chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
        $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
            "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
            "$(pwd)" \
            "$RPM_BUILD_ROOT/kabidw-base/%{_target_cpu}${Variant:+.${Variant}}" || :

        rm -rf $RPM_BUILD_ROOT/kabi-dwarf
    fi
%endif

%if %{with_kabidwchk}
    if [ "$Variant" != "zfcpdump" ]; then
        mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
        tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
        if [ -d "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" ]; then
            mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
            tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists

            echo "**** GENERATING DWARF-based kABI dataset ****"
            chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
            $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
                "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
                "$(pwd)" \
                "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :

            echo "**** kABI DWARF-based comparison report ****"
            $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh compare \
                "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" \
                "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
            echo "**** End of kABI DWARF-based comparison report ****"
        else
            echo "**** Baseline dataset for kABI DWARF-BASED comparison report not found ****"
        fi

        rm -rf $RPM_BUILD_ROOT/kabi-dwarf
    fi
%endif

    # then drop all but the needed Makefiles/Kconfig files
    rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
    rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
    cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/tracing
    rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/spdxcheck.py

%ifarch s390x
    # CONFIG_EXPOLINE_EXTERN=y produces arch/s390/lib/expoline/expoline.o
    # which is needed during external module build.
    if [ -f arch/s390/lib/expoline/expoline.o ]; then
      cp -a --parents arch/s390/lib/expoline/expoline.o $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    fi
%endif

    # Files for 'make scripts' to succeed with kernel-devel.
    mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/security/selinux/include
    cp -a --parents security/selinux/include/classmap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents security/selinux/include/initial_sid_to_string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/include/tools
    cp -a --parents tools/include/tools/be_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/include/tools/le_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build

    # Files for 'make prepare' to succeed with kernel-devel.
    cp -a --parents tools/include/linux/compiler* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/include/linux/types.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/build/Build.include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp --parents tools/build/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp --parents tools/build/fixdep.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp --parents tools/objtool/sync-check.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/bpf/resolve_btfids $RPM_BUILD_ROOT/lib/modules/$KernelVer/build

    cp --parents security/selinux/include/policycap_names.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp --parents security/selinux/include/policycap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build

    cp -a --parents tools/include/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/include/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/include/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/include/uapi/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/include/uapi/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/include/vdso $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp --parents tools/scripts/utilities.mak $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/lib/subcmd $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp --parents tools/lib/*.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp --parents tools/objtool/*.[ch] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp --parents tools/objtool/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp --parents tools/objtool/include/objtool/*.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/lib/bpf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp --parents tools/lib/bpf/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build

    if [ -f tools/objtool/objtool ]; then
      cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
    fi
    if [ -f tools/objtool/fixdep ]; then
      cp -a tools/objtool/fixdep $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
    fi
    if [ -d arch/$Arch/scripts ]; then
      cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
    fi
    if [ -f arch/$Arch/*lds ]; then
      cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
    fi
    if [ -f arch/%{asmarch}/kernel/module.lds ]; then
      cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    fi
    find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
%ifarch ppc64le
    cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
%endif
    if [ -d arch/%{asmarch}/include ]; then
      cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    fi
    if [ -d tools/arch/%{asmarch}/include ]; then
      cp -a --parents tools/arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    fi
%ifarch aarch64
    # arch/arm64/include/asm/xen references arch/arm
    cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    # arch/arm64/include/asm/opcodes.h references arch/arm
    cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
%endif
    # include the machine specific headers for ARM variants, if available.
%ifarch %{arm}
    if [ -d arch/%{asmarch}/mach-${Variant}/include ]; then
      cp -a --parents arch/%{asmarch}/mach-${Variant}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    fi
    # include a few files for 'make prepare'
    cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/

%endif
    cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
%ifarch i686 x86_64
    # files for 'make prepare' to succeed with kernel-devel
    cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/

    cp -a --parents scripts/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    cp -a --parents scripts/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/

    cp -a --parents tools/arch/x86/include/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/arch/x86/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/objtool/arch/x86/lib $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/arch/x86/lib/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/arch/x86/tools/gen-insn-attr-x86.awk $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/objtool/arch/x86/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build

%endif
    # Clean up intermediate tools files
    find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +

    # Make sure the Makefile, version.h, and auto.conf have a matching
    # timestamp so that external modules can be built
    touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile \
        $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h \
        $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf

%if %{with_debuginfo}
    eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id
    cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id

    #
    # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
    #
    mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
    cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
    if [ -n "%{vmlinux_decompressor}" ]; then
	    eu-readelf -n  %{vmlinux_decompressor} | grep "Build ID" | awk '{print $NF}' > vmlinux.decompressor.id
	    # Without build-id the build will fail. But for s390 the build-id
	    # wasn't added before 5.11. In case it is missing prefer not
	    # packaging the debuginfo over a build failure.
	    if [ -s vmlinux.decompressor.id ]; then
		    cp vmlinux.decompressor.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.decompressor.id
		    cp %{vmlinux_decompressor} $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer/vmlinux.decompressor
	    fi
    fi
%endif

    find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames

    # mark modules executable so that strip-to-file can strip them
    xargs --no-run-if-empty chmod u+x < modnames

    # Generate a list of modules for block and networking.

    grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
    sed -n 's,^.*/\([^/]*\.ko\):  *U \(.*\)$,\1 \2,p' > drivers.undef

    collect_modules_list()
    {
      sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
        LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
      if [ ! -z "$3" ]; then
        sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
      fi
    }

    collect_modules_list networking \
      'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice'
    collect_modules_list block \
      'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko'
    collect_modules_list drm \
      'drm_open|drm_init'
    collect_modules_list modesetting \
      'drm_crtc_init'

    # detect missing or incorrect license tags
    ( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \
        grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1

    remove_depmod_files()
    {
        # remove files that will be auto generated by depmod at rpm -i time
        pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/
            # in case below list needs to be extended, remember to add a
            # matching ghost entry in the files section as well
            rm -f modules.{alias,alias.bin,builtin.alias.bin,builtin.bin} \
                  modules.{dep,dep.bin,devname,softdep,symbols,symbols.bin}
        popd
    }

    remove_depmod_files

    # Identify modules in the kernel-modules-extras package
    %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer $(realpath configs/mod-extra.list)
    # Identify modules in the kernel-modules-extras package
    %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE84} internal
%if 0%{!?fedora:1}
    # Identify modules in the kernel-modules-partner package
    %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE85} partner
%endif
    if [ "$Variant" = "rt" ] || [ "$Variant" = "rt-debug" ]; then
        # Identify modules in the kernel-rt-kvm package
        %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE86} kvm
    fi

    #
    # Generate the kernel-core and kernel-modules files lists
    #

    # Copy the System.map file for depmod to use, and create a backup of the
    # full module tree so we can restore it after we're done filtering
    cp System.map $RPM_BUILD_ROOT/.
    cp configs/filter-*.sh $RPM_BUILD_ROOT/.
    pushd $RPM_BUILD_ROOT
    mkdir restore
    cp -r lib/modules/$KernelVer/* restore/.

    # don't include anything going into kernel-modules-extra in the file lists
    xargs rm -rf < mod-extra.list
    # don't include anything going int kernel-modules-internal in the file lists
    xargs rm -rf < mod-internal.list
%if 0%{!?fedora:1}
    # don't include anything going int kernel-modules-partner in the file lists
    xargs rm -rf < mod-partner.list
%endif
    if [ "$Variant" = "rt" ] || [ "$Variant" = "rt-debug" ]; then
        # don't include anything going into kernel-rt-kvm in the file lists
        xargs rm -rf < mod-kvm.list
    fi

    if [ $DoModules -eq 1 ]; then
	# Find all the module files and filter them out into the core and
	# modules lists.  This actually removes anything going into -modules
	# from the dir.
	find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list
	./filter-modules.sh modules.list %{_target_cpu}
	rm filter-*.sh

	# Run depmod on the resulting module tree and make sure it isn't broken
	depmod -b . -aeF ./System.map $KernelVer &> depmod.out
	if [ -s depmod.out ]; then
	    echo "Depmod failure"
	    cat depmod.out
	    exit 1
	else
	    rm depmod.out
	fi
    else
	# Ensure important files/directories exist to let the packaging succeed
	echo '%%defattr(-,-,-)' > modules.list
	echo '%%defattr(-,-,-)' > k-d.list
	mkdir -p lib/modules/$KernelVer/kernel
	# Add files usually created by make modules, needed to prevent errors
	# thrown by depmod during package installation
	touch lib/modules/$KernelVer/modules.order
	touch lib/modules/$KernelVer/modules.builtin
    fi

%if %{efiuki}
    if [ "$Variant" != "rt" ] && [ "$Variant" != "rt-debug" ]; then
        popd

        # RHEL/CentOS specific .SBAT entries
%if 0%{?centos}
        SBATsuffix="centos"
%else
        SBATsuffix="rhel"
%endif
        SBAT=$(cat <<- EOF
	linux,1,Red Hat,linux,$KernelVer,mailto:secalert@redhat.com
	linux.$SBATsuffix,1,Red Hat,linux,$KernelVer,mailto:secalert@redhat.com
	kernel-uki-virt.$SBATsuffix,1,Red Hat,kernel-uki-virt,$KernelVer,mailto:secalert@redhat.com
	EOF
	)

        KernelUnifiedImageDir="$RPM_BUILD_ROOT/lib/modules/$KernelVer"
        KernelUnifiedImage="$KernelUnifiedImageDir/$InstallName-virt.efi"
    
        mkdir -p $KernelUnifiedImageDir
    
        dracut --conf=%{SOURCE150} \
               --confdir=$(mktemp -d) \
               --verbose \
               --kver "$KernelVer" \
               --kmoddir "$RPM_BUILD_ROOT/lib/modules/$KernelVer/" \
               --logfile=$(mktemp) \
               --uefi \
               --sbat "$SBAT" \
               --kernel-image $(realpath $KernelImage) \
               --kernel-cmdline 'console=tty0 console=ttyS0' \
    	   $KernelUnifiedImage

        KernelAddonsDirOut="$KernelUnifiedImage.extra.d"
        mkdir -p $KernelAddonsDirOut
        python3 %{SOURCE151} %{SOURCE152} $KernelAddonsDirOut virt %{primary_target} %{_target_cpu}

%if %{signkernel}

%if 0%{?centos}
	UKI_secureboot_name=centossecureboot204
%else
	UKI_secureboot_name=redhatsecureboot504
%endif
	UKI_secureboot_cert=%{_datadir}/pki/sb-certs/secureboot-uki-virt-%{_arch}.cer

        %pesign -s -i $KernelUnifiedImage -o $KernelUnifiedImage.signed -a %{secureboot_ca_0} -c $UKI_secureboot_cert -n $UKI_secureboot_name
        if [ ! -s $KernelUnifiedImage.signed ]; then
          echo "pesigning failed"
          exit 1
        fi
        mv $KernelUnifiedImage.signed $KernelUnifiedImage

      for addon in "$KernelAddonsDirOut"/*; do
        %pesign -s -i $addon -o $addon.signed -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0}
        rm -f $addon
        mv $addon.signed $addon
      done

# signkernel
%endif

      # hmac sign the UKI for FIPS
      KernelUnifiedImageHMAC="$KernelUnifiedImageDir/.$InstallName-virt.efi.hmac"
      echo "hmac sign the UKI for FIPS"
      echo "Creating hmac file: $KernelUnifiedImageHMAC"
      (cd $KernelUnifiedImageDir && sha512hmac $InstallName-virt.efi) > $KernelUnifiedImageHMAC;

        pushd $RPM_BUILD_ROOT

    # Variant != rt && Variant != rt-debug
    fi
# efiuki
%endif

    remove_depmod_files

    # Go back and find all of the various directories in the tree.  We use this
    # for the dir lists in kernel-core
    find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list

    # Cleanup
    rm System.map
    # Just "cp -r" can be very slow: here, it rewrites _existing files_
    # with open(O_TRUNC). Many filesystems synchronously wait for metadata
    # update for such file rewrites (seen in strace as final close syscall
    # taking a long time). On a rotational disk, cp was observed to take
    # more than 5 minutes on ext4 and more than 15 minutes (!) on xfs.
    # With --remove-destination, we avoid this, and copying
    # (with enough RAM to cache it) takes 5 seconds:
    cp -r --remove-destination restore/* lib/modules/$KernelVer/.
    rm -rf restore
    popd

    # Make sure the files lists start with absolute paths or rpmbuild fails.
    # Also add in the dir entries
    sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Variant:+-${Variant}}-modules.list
    sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Variant:+-${Variant}}-modules-core.list
    sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Variant:+-${Variant}}-modules-core.list
    sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-extra.list >> ../kernel${Variant:+-${Variant}}-modules-extra.list

    # Cleanup
    rm -f $RPM_BUILD_ROOT/k-d.list
    rm -f $RPM_BUILD_ROOT/modules.list
    rm -f $RPM_BUILD_ROOT/module-dirs.list
    rm -f $RPM_BUILD_ROOT/mod-extra.list
    rm -f $RPM_BUILD_ROOT/mod-internal.list
%if 0%{!?fedora:1}
    rm -f $RPM_BUILD_ROOT/mod-partner.list
%endif
    if [ "$Variant" = "rt" ] || [ "$Variant" = "rt-debug" ]; then
        rm -f $RPM_BUILD_ROOT/mod-kvm.list
    fi

%if %{with_cross}
    make -C $RPM_BUILD_ROOT/lib/modules/$KernelVer/build M=scripts clean
    make -C $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/bpf/resolve_btfids clean
    sed -i 's/REBUILD_SCRIPTS_FOR_CROSS:=0/REBUILD_SCRIPTS_FOR_CROSS:=1/' $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile
%endif

    # Move the devel headers out of the root file system
    mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
    mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir

    # This is going to create a broken link during the build, but we don't use
    # it after this point.  We need the link to actually point to something
    # when kernel-devel is installed, and a relative link doesn't work across
    # the F17 UsrMove feature.
    ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build

%ifnarch armv7hl
    # Generate vmlinux.h and put it to kernel-devel path
    # zfcpdump build does not have btf anymore
    if [ "$Variant" != "zfcpdump" ]; then
        # Build the bootstrap bpftool to generate vmlinux.h
        make -C tools/bpf/bpftool bootstrap
        tools/bpf/bpftool/bootstrap/bpftool btf dump file vmlinux format c > $RPM_BUILD_ROOT/$DevelDir/vmlinux.h
    fi
%endif

    # prune junk from kernel-devel
    find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete

    # Red Hat UEFI Secure Boot CA cert, which can be used to authenticate the kernel
    mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer
%if %{signkernel}
    install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
    %ifarch s390x ppc64le
    if [ -x /usr/bin/rpm-sign ]; then
        install -m 0644 %{secureboot_key_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
    fi
    %endif
%endif

%if 0%{?rhel}
    # Red Hat IMA code-signing cert, which is used to authenticate package files
    install -m 0644 %{ima_signing_cert} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{ima_cert_name}
%endif

%if %{signmodules}
    if [ $DoModules -eq 1 ]; then
        # Save the signing keys so we can sign the modules in __modsign_install_post
        cp certs/signing_key.pem certs/signing_key.pem.sign${Variant:++${Variant}}
        cp certs/signing_key.x509 certs/signing_key.x509.sign${Variant:++${Variant}}
        %ifarch s390x ppc64le
        if [ ! -x /usr/bin/rpm-sign ]; then
            install -m 0644 certs/signing_key.x509.sign${Variant:++${Variant}} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
            openssl x509 -in certs/signing_key.pem.sign${Variant:++${Variant}} -outform der -out $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
            chmod 0644 $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
        fi
        %endif
    fi
%endif

%if %{with_ipaclones}
    MAXPROCS=$(echo %{?_smp_mflags} | sed -n 's/-j\s*\([0-9]\+\)/\1/p')
    if [ -z "$MAXPROCS" ]; then
        MAXPROCS=1
    fi
    if [ "$Variant" == "" ]; then
        mkdir -p $RPM_BUILD_ROOT/$DevelDir-ipaclones
        find . -name '*.ipa-clones' | xargs -i{} -r -n 1 -P $MAXPROCS install -m 644 -D "{}" "$RPM_BUILD_ROOT/$DevelDir-ipaclones/{}"
    fi
%endif

%if %{with_gcov}
    popd
%endif
}

###
# DO it...
###

# prepare directories
rm -rf $RPM_BUILD_ROOT
mkdir -p $RPM_BUILD_ROOT/boot
mkdir -p $RPM_BUILD_ROOT%{_libexecdir}

cd linux-%{KVERREL}


%if %{with_debug}
BuildKernel %make_target %kernel_image %{_use_vdso} debug
%if %{with_arm64_64k}
BuildKernel %make_target %kernel_image %{_use_vdso} 64k-debug
%endif
%if %{with_realtime}
BuildKernel %make_target %kernel_image %{_use_vdso} rt-debug
%endif
%endif

%if %{with_zfcpdump}
BuildKernel %make_target %kernel_image %{_use_vdso} zfcpdump
%endif

%if %{with_arm64_64k}
BuildKernel %make_target %kernel_image %{_use_vdso} 64k
%endif

%if %{with_pae}
BuildKernel %make_target %kernel_image %{use_vdso} lpae
%endif

%if %{with_realtime}
BuildKernel %make_target %kernel_image %{use_vdso} rt
%endif

%if %{with_up}
BuildKernel %make_target %kernel_image %{_use_vdso}
%endif

%ifnarch noarch i686
%if !%{with_debug} && !%{with_zfcpdump} && !%{with_pae} && !%{with_up} && !%{with_arm64_64k} && !%{with_realtime}
# If only building the user space tools, then initialize the build environment
# and some variables so that the various userspace tools can be built.
InitBuildVars
%endif
%endif

%ifarch aarch64
%global perf_build_extra_opts CORESIGHT=1
%endif
%global perf_make \
  %{__make} %{?make_opts} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags} -Wl,-E" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 LIBBPF_DYNAMIC=1 LIBTRACEEVENT_DYNAMIC=1 %{?perf_build_extra_opts} prefix=%{_prefix} PYTHON=%{__python3}
%if %{with_perf}
# perf
# make sure check-headers.sh is executable
chmod +x tools/perf/check-headers.sh
%{perf_make} DESTDIR=$RPM_BUILD_ROOT all
# libperf
make -C tools/lib/perf V=1
%endif

%global tools_make \
  CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{make} %{?make_opts}

%if %{with_tools}
%ifarch %{cpupowerarchs}
# cpupower
# make sure version-gen.sh is executable.
chmod +x tools/power/cpupower/utils/version-gen.sh
%{tools_make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false DEBUG=false
%ifarch x86_64
    pushd tools/power/cpupower/debug/x86_64
    %{tools_make} %{?_smp_mflags} centrino-decode powernow-k8-decode
    popd
%endif
%ifarch x86_64
   pushd tools/power/x86/x86_energy_perf_policy/
   %{tools_make}
   popd
   pushd tools/power/x86/turbostat
   %{tools_make}
   popd
   pushd tools/power/x86/intel-speed-select
   %{tools_make}
   popd
   pushd tools/arch/x86/intel_sdsi
   %{tools_make} CFLAGS="${RPM_OPT_FLAGS}"
   popd
%endif
%endif
pushd tools/thermal/tmon/
%{tools_make}
popd
pushd tools/iio/
%{tools_make}
popd
pushd tools/gpio/
%{tools_make}
popd
# build VM tools
pushd tools/mm/
%{tools_make} CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" slabinfo page_owner_sort
popd
pushd tools/verification/rv/
%{tools_make}
popd
pushd tools/tracing/rtla
%{tools_make}
popd
%endif

if [ -f $DevelDir/vmlinux.h ]; then
  RPM_VMLINUX_H=$DevelDir/vmlinux.h
fi
echo "${RPM_VMLINUX_H}" > ../vmlinux_h_path

%if %{with_bpftool}
%global bpftool_make \
  %{__make} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_LDFLAGS="%{__global_ldflags}" DESTDIR=$RPM_BUILD_ROOT %{?make_opts} VMLINUX_H="${RPM_VMLINUX_H}" V=1
pushd tools/bpf/bpftool
%{bpftool_make}
popd
%else
echo "bpftools disabled ... disabling selftests"
%endif

%if %{with_selftests}
# Unfortunately, samples/bpf/Makefile expects that the headers are installed
# in the source tree. We installed them previously to $RPM_BUILD_ROOT/usr
# but there's no way to tell the Makefile to take them from there.
%{make} %{?_smp_mflags} headers_install

# If we re building only tools without kernel, we need to generate config
# headers and prepare tree for modules building. The modules_prepare target
# will cover both.
if [ ! -f include/generated/autoconf.h ]; then
   %{make} %{?_smp_mflags} modules_prepare
fi

%{make} %{?_smp_mflags} ARCH=$Arch V=1 M=samples/bpf/ VMLINUX_H="${RPM_VMLINUX_H}" || true

# Prevent bpf selftests to build bpftool repeatedly:
export BPFTOOL=$(pwd)/tools/bpf/bpftool/bpftool

pushd tools/testing/selftests
# We need to install here because we need to call make with ARCH set which
# doesn't seem possible to do in the install section.
%{make} %{?_smp_mflags} ARCH=$Arch V=1 TARGETS="bpf cgroup mm livepatch net net/forwarding net/mptcp netfilter tc-testing memfd drivers/net/bonding iommu cachestat" SKIP_TARGETS="" FORCE_TARGETS=1 INSTALL_PATH=%{buildroot}%{_libexecdir}/kselftests VMLINUX_H="${RPM_VMLINUX_H}" DEFAULT_INSTALL_HDR_PATH=0 install

# 'make install' for bpf is broken and upstream refuses to fix it.
# Install the needed files manually.
for dir in bpf bpf/no_alu32 bpf/progs; do
	# In ARK, the rpm build continues even if some of the selftests
	# cannot be built. It's not always possible to build selftests,
	# as upstream sometimes dependens on too new llvm version or has
	# other issues. If something did not get built, just skip it.
	test -d $dir || continue
	mkdir -p %{buildroot}%{_libexecdir}/kselftests/$dir
	find $dir -maxdepth 1 -type f \( -executable -o -name '*.py' -o -name settings -o \
		-name 'btf_dump_test_case_*.c' -o -name '*.ko' -o \
		-name '*.o' -exec sh -c 'readelf -h "{}" | grep -q "^  Machine:.*BPF"' \; \) -print0 | \
	xargs -0 cp -t %{buildroot}%{_libexecdir}/kselftests/$dir || true
done
ln -sr  %{buildroot}%{_libexecdir}/kselftests/bpf/bpftool %{buildroot}%{_libexecdir}/kselftests/bpf/no_alu32/bpftool
%buildroot_save_unstripped "usr/libexec/kselftests/bpf/test_progs"
%buildroot_save_unstripped "usr/libexec/kselftests/bpf/test_progs-no_alu32"
popd
export -n BPFTOOL
%endif

%if %{with_doc}
# Make the HTML pages.
%{__make} PYTHON=/usr/bin/python3 htmldocs || %{doc_build_fail}

# sometimes non-world-readable files sneak into the kernel source tree
chmod -R a=rX Documentation
find Documentation -type d | xargs chmod u+w
%endif

# In the modsign case, we do 3 things.  1) We check the "variant" and hard
# code the value in the following invocations.  This is somewhat sub-optimal
# but we're doing this inside of an RPM macro and it isn't as easy as it
# could be because of that.  2) We restore the .tmp_versions/ directory from
# the one we saved off in BuildKernel above.  This is to make sure we're
# signing the modules we actually built/installed in that variant.  3) We
# grab the arch and invoke mod-sign.sh command to actually sign the modules.
#
# We have to do all of those things _after_ find-debuginfo runs, otherwise
# that will strip the signature off of the modules.
#
# Don't sign modules for the zfcpdump variant as it is monolithic.

%define __modsign_install_post \
  if [ "%{signmodules}" -eq "1" ]; then \
    if [ "%{with_pae}" -ne "0" ]; then \
       %{modsign_cmd} certs/signing_key.pem.sign+lpae certs/signing_key.x509.sign+lpae $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+lpae/ \
    fi \
    if [ "%{with_realtime}" -ne "0" ]; then \
       %{modsign_cmd} certs/signing_key.pem.sign+rt certs/signing_key.x509.sign+rt $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+rt/ \
    fi \
    if [ "%{with_debug}" -ne "0" ]; then \
         %{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \
    fi \
    if [ "%{with_arm64_64k}" -ne "0" ]; then \
       %{modsign_cmd} certs/signing_key.pem.sign+64k certs/signing_key.x509.sign+64k $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+64k/ \
    fi \
    if [ "%{with_arm64_64k}" -ne "0" ] && [ "%{with_debug}" -ne "0" ]; then \
         %{modsign_cmd} certs/signing_key.pem.sign+64k-debug certs/signing_key.x509.sign+64k-debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+64k-debug/ \
    fi \
    if [ "%{with_realtime}" -ne "0" ] && [ "%{with_debug}" -ne "0" ]; then \
         %{modsign_cmd} certs/signing_key.pem.sign+rt-debug certs/signing_key.x509.sign+rt-debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+rt-debug/ \
    fi \
    if [ "%{with_up}" -ne "0" ]; then \
      %{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \
    fi \
  fi \
  if [ "%{zipmodules}" -eq "1" ]; then \
    echo "Compressing kernel modules ..." \
    find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -n 16 -P${RPM_BUILD_NCPUS} -r %compression %compression_flags; \
  fi \
%{nil}

###
### Special hacks for debuginfo subpackages.
###

# This macro is used by %%install, so we must redefine it before that.
%define debug_package %{nil}

%if %{with_debuginfo}

%ifnarch noarch
%global __debug_package 1
%files -f debugfiles.list debuginfo-common-%{_target_cpu}
%endif

%endif

# We don't want to package debuginfo for self-tests and samples but
# we have to delete them to avoid an error messages about unpackaged
# files.
# Delete the debuginfo for kernel-devel files
%define __remove_unwanted_dbginfo_install_post \
  if [ "%{with_selftests}" -ne "0" ]; then \
    rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/ksamples; \
    rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/kselftests; \
  fi \
  rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/src; \
%{nil}

#
# Disgusting hack alert! We need to ensure we sign modules *after* all
# invocations of strip occur, which is in __debug_install_post if
# find-debuginfo.sh runs, and __os_install_post if not.
#
%define __spec_install_post \
  %{?__debug_package:%{__debug_install_post}}\
  %{__arch_install_post}\
  %{__os_install_post}\
  %{__remove_unwanted_dbginfo_install_post}\
  %{__restore_unstripped_root_post}\
  %{__modsign_install_post}

###
### install
###

%install

cd linux-%{KVERREL}

# re-define RPM_VMLINUX_H, because it doesn't carry over from %build
RPM_VMLINUX_H="$(cat ../vmlinux_h_path)"

%if %{with_doc}
docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}

# copy the source over
mkdir -p $docdir
tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir
cat %{SOURCE2} | xz > $docdir/kernel.changelog.xz
chmod 0644 $docdir/kernel.changelog.xz

# with_doc
%endif

# We have to do the headers install before the tools install because the
# kernel headers_install will remove any header files in /usr/include that
# it doesn't install itself.

%if %{with_headers}
# Install kernel headers
%{__make} ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install

find $RPM_BUILD_ROOT/usr/include \
     \( -name .install -o -name .check -o \
        -name ..install.cmd -o -name ..check.cmd \) -delete

%endif

%if %{with_cross_headers}
%if 0%{?fedora}
HDR_ARCH_LIST='arm arm64 powerpc s390 x86'
%else
HDR_ARCH_LIST='arm64 powerpc s390 x86'
%endif
mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers

for arch in $HDR_ARCH_LIST; do
	mkdir $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}
	%{__make} ARCH=${arch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} headers_install
done

find $RPM_BUILD_ROOT/usr/tmp-headers \
     \( -name .install -o -name .check -o \
        -name ..install.cmd -o -name ..check.cmd \) -delete

# Copy all the architectures we care about to their respective asm directories
for arch in $HDR_ARCH_LIST ; do
	mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include
	mv $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/
done

rm -rf $RPM_BUILD_ROOT/usr/tmp-headers
%endif

%if %{with_kernel_abi_stablelists}
# kabi directory
INSTALL_KABI_PATH=$RPM_BUILD_ROOT/lib/modules/
mkdir -p $INSTALL_KABI_PATH

# install kabi releases directories
tar xjvf %{SOURCE300} -C $INSTALL_KABI_PATH
# with_kernel_abi_stablelists
%endif

%if %{with_perf}
# perf tool binary and supporting scripts/binaries
%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin
# remove the 'trace' symlink.
rm -f %{buildroot}%{_bindir}/trace

# For both of the below, yes, this should be using a macro but right now
# it's hard coded and we don't actually want it anyway right now.
# Whoever wants examples can fix it up!

# remove examples
rm -rf %{buildroot}/usr/lib/perf/examples
rm -rf %{buildroot}/usr/lib/perf/include

# python-perf extension
%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext

# perf man pages (note: implicit rpm magic compresses them later)
mkdir -p %{buildroot}/%{_mandir}/man1
%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man

# remove any tracevent files, eg. its plugins still gets built and installed,
# even if we build against system's libtracevent during perf build (by setting
# LIBTRACEEVENT_DYNAMIC=1 above in perf_make macro). Those files should already
# ship with libtraceevent package.
rm -rf %{buildroot}%{_libdir}/traceevent

# libperf
make -C tools/lib/perf DESTDIR=%{buildroot} prefix=%{_prefix} libdir=%{_libdir} V=1 install
rm -f %{buildroot}%{_libdir}/libperf.a
%endif

%if %{with_tools}
%ifarch %{cpupowerarchs}
%{make} -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
rm -f %{buildroot}%{_libdir}/*.{a,la}
%find_lang cpupower
mv cpupower.lang ../
%ifarch x86_64
    pushd tools/power/cpupower/debug/x86_64
    install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
    install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
    popd
%endif
chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
%endif
%ifarch x86_64
   mkdir -p %{buildroot}%{_mandir}/man8
   pushd tools/power/x86/x86_energy_perf_policy
   %{tools_make} DESTDIR=%{buildroot} install
   popd
   pushd tools/power/x86/turbostat
   %{tools_make} DESTDIR=%{buildroot} install
   popd
   pushd tools/power/x86/intel-speed-select
   %{tools_make} DESTDIR=%{buildroot} install
   popd
   pushd tools/arch/x86/intel_sdsi
   %{tools_make} CFLAGS="${RPM_OPT_FLAGS}" DESTDIR=%{buildroot} install
   popd
%endif
pushd tools/thermal/tmon
%{tools_make} INSTALL_ROOT=%{buildroot} install
popd
pushd tools/iio
%{tools_make} DESTDIR=%{buildroot} install
popd
pushd tools/gpio
%{tools_make} DESTDIR=%{buildroot} install
popd
install -m644 -D %{SOURCE2002} %{buildroot}%{_sysconfdir}/logrotate.d/kvm_stat
pushd tools/kvm/kvm_stat
%{__make} INSTALL_ROOT=%{buildroot} install-tools
%{__make} INSTALL_ROOT=%{buildroot} install-man
install -m644 -D kvm_stat.service %{buildroot}%{_unitdir}/kvm_stat.service
popd
# install VM tools
pushd tools/mm/
install -m755 slabinfo %{buildroot}%{_bindir}/slabinfo
install -m755 page_owner_sort %{buildroot}%{_bindir}/page_owner_sort
popd
pushd tools/verification/rv/
%{tools_make} DESTDIR=%{buildroot} install
popd
pushd tools/tracing/rtla/
%{tools_make} DESTDIR=%{buildroot} install
rm -f %{buildroot}%{_bindir}/hwnoise
rm -f %{buildroot}%{_bindir}/osnoise
rm -f %{buildroot}%{_bindir}/timerlat
(cd %{buildroot}

        ln -sf rtla ./%{_bindir}/hwnoise
        ln -sf rtla ./%{_bindir}/osnoise
        ln -sf rtla ./%{_bindir}/timerlat
)
popd
%endif

if [ -f $DevelDir/vmlinux.h ]; then
  RPM_VMLINUX_H=$DevelDir/vmlinux.h
fi

%if %{with_bpftool}
pushd tools/bpf/bpftool
%{bpftool_make} prefix=%{_prefix} bash_compdir=%{_sysconfdir}/bash_completion.d/ mandir=%{_mandir} install doc-install
popd
%endif

%if %{with_selftests}
pushd samples
install -d %{buildroot}%{_libexecdir}/ksamples
# install bpf samples
pushd bpf
install -d %{buildroot}%{_libexecdir}/ksamples/bpf
find -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/bpf \;
install -m755 *.sh %{buildroot}%{_libexecdir}/ksamples/bpf
# test_lwt_bpf.sh compiles test_lwt_bpf.c when run; this works only from the
# kernel tree. Just remove it.
rm %{buildroot}%{_libexecdir}/ksamples/bpf/test_lwt_bpf.sh
install -m644 *_kern.o %{buildroot}%{_libexecdir}/ksamples/bpf || true
install -m644 tcp_bpf.readme %{buildroot}%{_libexecdir}/ksamples/bpf
popd
# install pktgen samples
pushd pktgen
install -d %{buildroot}%{_libexecdir}/ksamples/pktgen
find . -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
find . -type f ! -executable -exec install -m644 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
popd
popd
# install mm selftests
pushd tools/testing/selftests/mm
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/mm/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/mm/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/mm/{} \;
popd
# install cgroup selftests
pushd tools/testing/selftests/cgroup
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/cgroup/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/cgroup/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/cgroup/{} \;
popd
# install drivers/net/mlxsw selftests
pushd tools/testing/selftests/drivers/net/mlxsw
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
popd
# install drivers/net/netdevsim selftests
pushd tools/testing/selftests/drivers/net/netdevsim
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
popd
# install drivers/net/bonding selftests
pushd tools/testing/selftests/drivers/net/bonding
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/bonding/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/bonding/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/bonding/{} \;
popd
# install net/forwarding selftests
pushd tools/testing/selftests/net/forwarding
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
popd
# install net/mptcp selftests
pushd tools/testing/selftests/net/mptcp
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
popd
# install tc-testing selftests
pushd tools/testing/selftests/tc-testing
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
popd
# install livepatch selftests
pushd tools/testing/selftests/livepatch
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
popd
# install netfilter selftests
pushd tools/testing/selftests/netfilter
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
popd

# install memfd selftests
pushd tools/testing/selftests/memfd
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/memfd/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/memfd/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/memfd/{} \;
popd
# install iommu selftests
pushd tools/testing/selftests/iommu
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/iommu/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/iommu/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/iommu/{} \;
popd
# install cachestat selftests
pushd tools/testing/selftests/cachestat
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/cachestat/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/cachestat/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/cachestat/{} \;
popd
%endif

###
### clean
###

###
### scripts
###

%if %{with_tools}
%post -n kernel-tools
%systemd_post cpupower.service

%preun -n kernel-tools
%systemd_preun cpupower.service

%postun -n kernel-tools
%systemd_postun cpupower.service

%post -n kernel-tools-libs
/sbin/ldconfig

%postun -n kernel-tools-libs
/sbin/ldconfig
%endif

#
# This macro defines a %%post script for a kernel*-devel package.
#	%%kernel_devel_post [<subpackage>]
# Note we don't run hardlink if ostree is in use, as ostree is
# a far more sophisticated hardlink implementation.
# https://github.com/projectatomic/rpm-ostree/commit/58a79056a889be8814aa51f507b2c7a4dccee526
#
# The deletion of *.hardlink-temporary files is a temporary workaround
# for this bug in the hardlink binary (fixed in util-linux 2.38):
# https://github.com/util-linux/util-linux/issues/1602
#
%define kernel_devel_post() \
%{expand:%%post %{?1:%{1}-}devel}\
if [ -f /etc/sysconfig/kernel ]\
then\
    . /etc/sysconfig/kernel || exit $?\
fi\
if [ "$HARDLINK" != "no" -a -x /usr/bin/hardlink -a ! -e /run/ostree-booted ] \
then\
    (cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\
     /usr/bin/find . -type f | while read f; do\
       hardlink -c /usr/src/kernels/*%{?dist}.*/$f $f > /dev/null\
     done;\
     /usr/bin/find /usr/src/kernels -type f -name '*.hardlink-temporary' -delete\
    )\
fi\
%if %{with_cross}\
    echo "Building scripts and resolve_btfids"\
    env --unset=ARCH make -C /usr/src/kernels/%{KVERREL}%{?1:+%{1}} prepare_after_cross\
%endif\
%{nil}

#
# This macro defines a %%post script for a kernel*-modules-extra package.
# It also defines a %%postun script that does the same thing.
#	%%kernel_modules_extra_post [<subpackage>]
#
%define kernel_modules_extra_post() \
%{expand:%%post %{?1:%{1}-}modules-extra}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}\
%{expand:%%postun %{?1:%{1}-}modules-extra}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}

#
# This macro defines a %%post script for a kernel*-modules-internal package.
# It also defines a %%postun script that does the same thing.
#	%%kernel_modules_internal_post [<subpackage>]
#
%define kernel_modules_internal_post() \
%{expand:%%post %{?1:%{1}-}modules-internal}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}\
%{expand:%%postun %{?1:%{1}-}modules-internal}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}

%if %{with_realtime}
#
# This macro defines a %%post script for a kernel*-kvm package.
# It also defines a %%postun script that does the same thing.
#       %%kernel_kvm_post [<subpackage>]
#
%define kernel_kvm_post() \
%{expand:%%post %{?1:%{1}-}kvm}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}\
%{expand:%%postun %{?1:%{1}-}kvm}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}
%endif

#
# This macro defines a %%post script for a kernel*-modules-partner package.
# It also defines a %%postun script that does the same thing.
#	%%kernel_modules_partner_post [<subpackage>]
#
%define kernel_modules_partner_post() \
%{expand:%%post %{?1:%{1}-}modules-partner}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}\
%{expand:%%postun %{?1:%{1}-}modules-partner}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}

#
# This macro defines a %%post script for a kernel*-modules package.
# It also defines a %%postun script that does the same thing.
#	%%kernel_modules_post [<subpackage>]
#
%define kernel_modules_post() \
%{expand:%%post %{?1:%{1}-}modules}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
if [ ! -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}} ]; then\
	mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
	touch %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
fi\
%{nil}\
%{expand:%%postun %{?1:%{1}-}modules}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}\
%{expand:%%posttrans %{?1:%{1}-}modules}\
if [ -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}} ]; then\
	rm -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
	echo "Running: dracut -f --kver %{KVERREL}%{?1:+%{1}}"\
	dracut -f --kver "%{KVERREL}%{?1:+%{1}}" || exit $?\
fi\
%{nil}

#
# This macro defines a %%post script for a kernel*-modules-core package.
#	%%kernel_modules_core_post [<subpackage>]
#
%define kernel_modules_core_post() \
%{expand:%%posttrans %{?1:%{1}-}modules-core}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}

# This macro defines a %%posttrans script for a kernel package.
#	%%kernel_variant_posttrans [-v <subpackage>] [-u uki-suffix]
# More text can follow to go at the end of this variant's %%post.
#
%define kernel_variant_posttrans(v:u:) \
%{expand:%%posttrans %{?-v:%{-v*}-}%{!?-u*:core}%{?-u*:uki-%{-u*}}}\
%if 0%{!?fedora:1}\
if [ -x %{_sbindir}/weak-modules ]\
then\
    %{_sbindir}/weak-modules --add-kernel %{KVERREL}%{?-v:+%{-v*}} || exit $?\
fi\
%endif\
rm -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?-v:+%{-v*}}\
/bin/kernel-install add %{KVERREL}%{?-v:+%{-v*}} /lib/modules/%{KVERREL}%{?-v:+%{-v*}}/vmlinuz%{?-u:-%{-u*}.efi} || exit $?\
if [[ ! -e "/boot/symvers-%{KVERREL}%{?-v:+%{-v*}}.gz" ]]; then\
    ln -s "/lib/modules/%{KVERREL}%{?-v:+%{-v*}}/symvers.gz" "/boot/symvers-%{KVERREL}%{?-v:+%{-v*}}.gz"\
    command -v restorecon &>/dev/null && restorecon "/boot/symvers-%{KVERREL}%{?-v:+%{-v*}}.gz" \
fi\
echo "Looking for extlinux/u-boot configuration..." || exit $?\
if [ -f /boot/efi/extlinux/extlinux.conf ]\
then\
    while IFS= read -r line\
    do\
        grepped=$( echo $line | grep -i kernel || exit $? )\
        if [ "${grepped:0:8}" == "KERNEL /" ]\
        then\
            kname=$(echo "$grepped" | cut -d"/" -f 2 || exit $? )\
            echo -n "Copying vmlinuz..." || exit $?\
            cp -f /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz /boot/efi/$kname.gz || exit $?\
            gzip -df /boot/efi/$kname.gz || exit $? \
            echo "done." || exit $?\
        fi\
        grepped=$( echo $line | grep -i linux || exit $? )\
        if [ "${grepped:0:7}" == "linux /" ]\
        then\
            kname=$(echo "$grepped" | cut -d"/" -f 2 || exit $? )\
            echo -n "Copying vmlinuz..." || exit $?\
            cp -f /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz /boot/efi/$kname.gz || exit $?\
            gzip -df /boot/efi/$kname.gz || exit $? \
            echo "done." || exit $?\
        fi\
        grepped=$( echo $line | grep -i initrd || exit $? )\
        if [ "${grepped:0:8}" == "initrd /" ]\
        then\
            iname=$(echo "$grepped" | cut -d"/" -f 2 || exit $? )\
            echo -n "Copying initramfs image..." || exit $?\
            cp -f /boot/initramfs-%{KVERREL}%{?1:+%{1}}.img /boot/efi/$iname || exit $?\
            echo "done." || exit $?\
        elif [ "${grepped:0:15}" == "APPEND initrd=/" ]\
        then\
            iname=$(echo "$grepped" | cut -d"/" -f 2 | cut -d" " -f 1 || exit $? )\
            echo -n "Copying initramfs image..." || exit $?\
            cp -f /boot/initramfs-%{KVERREL}%{?1:+%{1}}.img /boot/efi/$iname || exit $?\
            echo "done." || exit $?\
        fi\
    done < /boot/efi/extlinux/extlinux.conf || exit $?\
else\
    echo "Configuration file not found." || exit $?\
fi\
%{nil}

#
# This macro defines a %%post script for a kernel package and its devel package.
#	%%kernel_variant_post [-v <subpackage>] [-r <replace>]
# More text can follow to go at the end of this variant's %%post.
#
%define kernel_variant_post(v:r:) \
%{expand:%%kernel_devel_post %{?-v*}}\
%{expand:%%kernel_modules_post %{?-v*}}\
%{expand:%%kernel_modules_core_post %{?-v*}}\
%{expand:%%kernel_modules_extra_post %{?-v*}}\
%{expand:%%kernel_modules_internal_post %{?-v*}}\
%if 0%{!?fedora:1}\
%{expand:%%kernel_modules_partner_post %{?-v*}}\
%endif\
%if "%{-v*}" == "rt" || "%{-v*}" == "rt-debug"\
%{expand:%%kernel_kvm_post %{?-v*}}\
%endif\
%{expand:%%kernel_variant_posttrans %{?-v*:-v %{-v*}}}\
%{expand:%%post %{?-v*:%{-v*}-}core}\
%{-r:\
if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
   [ -f /etc/sysconfig/kernel ]; then\
  /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
fi}\
mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
touch %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?-v:+%{-v*}}\
%{nil}

#
# This macro defines a %%preun script for a kernel package.
#	%%kernel_variant_preun [-v <subpackage>] [-u uki-suffix]
#
%define kernel_variant_preun(v:u:) \
%{expand:%%preun %{?-v:%{-v*}-}%{!?-u*:core}%{?-u*:uki-%{-u*}}}\
/bin/kernel-install remove %{KVERREL}%{?-v:+%{-v*}} || exit $?\
if [ -x %{_sbindir}/weak-modules ]\
then\
    %{_sbindir}/weak-modules --remove-kernel %{KVERREL}%{?-v:+%{-v*}} || exit $?\
fi\
%{nil}

%if %{efiuki}
%kernel_variant_posttrans -u virt
%kernel_variant_preun -u virt
%endif

%kernel_variant_preun
%kernel_variant_post -r kernel-smp

%if %{with_pae}
%kernel_variant_preun -v lpae
%kernel_variant_post -v lpae -r (kernel|kernel-smp)
%endif

%if %{with_zfcpdump}
%kernel_variant_preun -v zfcpdump
%kernel_variant_post -v zfcpdump
%endif

%if %{with_arm64_64k}
%kernel_variant_preun -v 64k
%kernel_variant_post -v 64k
%endif

%if %{with_debug} && %{with_arm64_64k}
%kernel_variant_preun -v 64k-debug
%kernel_variant_post -v 64k-debug
%endif

%if %{with_realtime}
%kernel_variant_preun -v rt
%kernel_variant_post -v rt
%endif

%if %{with_debug} && %{with_realtime}
%kernel_variant_preun -v rt-debug
%kernel_variant_post -v rt-debug
%endif

%if %{with_debug}
%if %{efiuki}
%kernel_variant_posttrans -v debug -u virt
%kernel_variant_preun -v debug -u virt
%endif
%kernel_variant_preun -v debug
%kernel_variant_post -v debug
%endif

if [ -x /sbin/ldconfig ]
then
    /sbin/ldconfig -X || exit $?
fi

###
### file lists
###

%if %{with_headers}
%files headers
/usr/include/*
%exclude %{_includedir}/cpufreq.h
%exclude %{_includedir}/internal/
%exclude %{_includedir}/perf/
%endif

%if %{with_cross_headers}
%files cross-headers
/usr/*-linux-gnu/include/*
%endif

%if %{with_kernel_abi_stablelists}
%files -n kernel-abi-stablelists
/lib/modules/kabi-*
%endif

%if %{with_kabidw_base}
%ifarch x86_64 s390x ppc64 ppc64le aarch64
%files kernel-kabidw-base-internal
%defattr(-,root,root)
/kabidw-base/%{_target_cpu}/*
%endif
%endif

# only some architecture builds need kernel-doc
%if %{with_doc}
%files doc
%defattr(-,root,root)
%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation/*
%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation
%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/kernel.changelog.xz
%endif

%if %{with_perf}
%files -n perf
%{_bindir}/perf
%{_libdir}/libperf-jvmti.so
%dir %{_libexecdir}/perf-core
%{_libexecdir}/perf-core/*
%{_datadir}/perf-core/*
%{_mandir}/man[1-8]/perf*
%{_sysconfdir}/bash_completion.d/perf
%doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt
%{_docdir}/perf-tip/tips.txt

%files -n python3-perf
%{python3_sitearch}/*

%files -n libperf
%{_libdir}/libperf.so.0
%{_libdir}/libperf.so.0.0.1

%files -n libperf-devel
%{_libdir}/libperf.so
%{_libdir}/pkgconfig/libperf.pc
%{_includedir}/perf/
%{_includedir}/internal/
%{_mandir}/man3/libperf.*
%{_mandir}/man7/libperf-counting.*
%{_mandir}/man7/libperf-sampling.*
%{_docdir}/libperf/

%if %{with_debuginfo}
%files -f perf-debuginfo.list -n perf-debuginfo

%files -f python3-perf-debuginfo.list -n python3-perf-debuginfo

%files -f libperf-debuginfo.list -n libperf-debuginfo
%endif
# with_perf
%endif

%if %{with_tools}
%ifnarch %{cpupowerarchs}
%files -n kernel-tools
%else
%files -n kernel-tools -f cpupower.lang
%{_bindir}/cpupower
%{_datadir}/bash-completion/completions/cpupower
%ifarch x86_64
%{_bindir}/centrino-decode
%{_bindir}/powernow-k8-decode
%endif
%{_unitdir}/cpupower.service
%{_mandir}/man[1-8]/cpupower*
%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
%ifarch x86_64
%{_bindir}/x86_energy_perf_policy
%{_mandir}/man8/x86_energy_perf_policy*
%{_bindir}/turbostat
%{_mandir}/man8/turbostat*
%{_bindir}/intel-speed-select
%{_sbindir}/intel_sdsi
%endif
# cpupowerarchs
%endif
%{_bindir}/tmon
%{_bindir}/iio_event_monitor
%{_bindir}/iio_generic_buffer
%{_bindir}/lsiio
%{_bindir}/lsgpio
%{_bindir}/gpio-hammer
%{_bindir}/gpio-event-mon
%{_bindir}/gpio-watch
%{_mandir}/man1/kvm_stat*
%{_bindir}/kvm_stat
%{_unitdir}/kvm_stat.service
%config(noreplace) %{_sysconfdir}/logrotate.d/kvm_stat
%{_bindir}/page_owner_sort
%{_bindir}/slabinfo

%if %{with_debuginfo}
%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
%endif

%ifarch %{cpupowerarchs}
%files -n kernel-tools-libs
%{_libdir}/libcpupower.so.1
%{_libdir}/libcpupower.so.0.0.1

%files -n kernel-tools-libs-devel
%{_libdir}/libcpupower.so
%{_includedir}/cpufreq.h
%endif

%files -n rtla
%{_bindir}/rtla
%{_bindir}/hwnoise
%{_bindir}/osnoise
%{_bindir}/timerlat
%{_mandir}/man1/rtla-hwnoise.1.gz
%{_mandir}/man1/rtla-osnoise-hist.1.gz
%{_mandir}/man1/rtla-osnoise-top.1.gz
%{_mandir}/man1/rtla-osnoise.1.gz
%{_mandir}/man1/rtla-timerlat-hist.1.gz
%{_mandir}/man1/rtla-timerlat-top.1.gz
%{_mandir}/man1/rtla-timerlat.1.gz
%{_mandir}/man1/rtla.1.gz

%files -n rv
%{_bindir}/rv
%{_mandir}/man1/rv-list.1.gz
%{_mandir}/man1/rv-mon-wip.1.gz
%{_mandir}/man1/rv-mon-wwnr.1.gz
%{_mandir}/man1/rv-mon.1.gz
%{_mandir}/man1/rv.1.gz

# with_tools
%endif

%if %{with_bpftool}
%files -n bpftool
%{_sbindir}/bpftool
%{_sysconfdir}/bash_completion.d/bpftool
%{_mandir}/man8/bpftool-cgroup.8.gz
%{_mandir}/man8/bpftool-gen.8.gz
%{_mandir}/man8/bpftool-iter.8.gz
%{_mandir}/man8/bpftool-link.8.gz
%{_mandir}/man8/bpftool-map.8.gz
%{_mandir}/man8/bpftool-prog.8.gz
%{_mandir}/man8/bpftool-perf.8.gz
%{_mandir}/man8/bpftool.8.gz
%{_mandir}/man8/bpftool-net.8.gz
%{_mandir}/man8/bpftool-feature.8.gz
%{_mandir}/man8/bpftool-btf.8.gz
%{_mandir}/man8/bpftool-struct_ops.8.gz

%if %{with_debuginfo}
%files -f bpftool-debuginfo.list -n bpftool-debuginfo
%defattr(-,root,root)
%endif
%endif

%if %{with_selftests}
%files selftests-internal
%{_libexecdir}/ksamples
%{_libexecdir}/kselftests
%endif

# empty meta-package
%if %{with_up}
%ifnarch %nobuildarches noarch
%files
%endif
%endif

# This is %%{image_install_path} on an arch where that includes ELF files,
# or empty otherwise.
%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}

#
# This macro defines the %%files sections for a kernel package
# and its devel and debuginfo packages.
#	%%kernel_variant_files [-k vmlinux] <use_vdso> <condition> <subpackage>
#
%define kernel_variant_files(k:) \
%if %{2}\
%{expand:%%files %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\
%{!?_licensedir:%global license %%doc}\
%%license linux-%{KVERREL}/COPYING-%{version}-%{release}\
/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\
%ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\
/lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \
%ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \
%ifarch %{arm} aarch64\
/lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \
%ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \
%endif\
%attr(0600, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\
%ghost %attr(0600, root, root) /boot/System.map-%{KVERREL}%{?3:+%{3}}\
%dir /lib/modules\
%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
/lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\
/lib/modules/%{KVERREL}%{?3:+%{3}}/config\
/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.builtin*\
%ghost %attr(0600, root, root) /boot/symvers-%{KVERREL}%{?3:+%{3}}.gz\
%ghost %attr(0600, root, root) /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\
%ghost %attr(0644, root, root) /boot/config-%{KVERREL}%{?3:+%{3}}\
%{expand:%%files -f kernel-%{?3:%{3}-}modules-core.list %{?3:%{3}-}modules-core}\
%dir /lib/modules\
%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
%dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\
/lib/modules/%{KVERREL}%{?3:+%{3}}/build\
/lib/modules/%{KVERREL}%{?3:+%{3}}/source\
/lib/modules/%{KVERREL}%{?3:+%{3}}/updates\
/lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\
/lib/modules/%{KVERREL}%{?3:+%{3}}/systemtap\
%{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}\
%if %{1}\
/lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\
%endif\
/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.block\
/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.drm\
/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.modesetting\
/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.networking\
/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.order\
%ghost %attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.alias\
%ghost %attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.alias.bin\
%ghost %attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.builtin.alias.bin\
%ghost %attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.builtin.bin\
%ghost %attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.dep\
%ghost %attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.dep.bin\
%ghost %attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.devname\
%ghost %attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.softdep\
%ghost %attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.symbols\
%ghost %attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.symbols.bin\
%{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\
%{expand:%%files %{?3:%{3}-}devel}\
%defverify(not mtime)\
/usr/src/kernels/%{KVERREL}%{?3:+%{3}}\
%{expand:%%files %{?3:%{3}-}devel-matched}\
%{expand:%%files -f kernel-%{?3:%{3}-}modules-extra.list %{?3:%{3}-}modules-extra}\
%config(noreplace) /etc/modprobe.d/*-blacklist.conf\
%{expand:%%files %{?3:%{3}-}modules-internal}\
/lib/modules/%{KVERREL}%{?3:+%{3}}/internal\
%if 0%{!?fedora:1}\
%{expand:%%files %{?3:%{3}-}modules-partner}\
/lib/modules/%{KVERREL}%{?3:+%{3}}/partner\
%endif\
%if "%{3}" == "rt" || "%{3}" == "rt-debug"\
%{expand:%%files %{?3:%{3}-}kvm}\
/lib/modules/%{KVERREL}%{?3:+%{3}}/kvm\
%endif\
%if %{with_debuginfo}\
%ifnarch noarch\
%{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\
%endif\
%endif\
%if %{efiuki}\
%if "%{3}" != "rt" && "%{3}" != "rt-debug"\
%{expand:%%files %{?3:%{3}-}uki-virt}\
%dir /lib/modules\
%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
%attr(0600, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\
/lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\
/lib/modules/%{KVERREL}%{?3:+%{3}}/config\
/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.builtin*\
%attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-virt.efi\
%attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/.%{?-k:%{-k*}}%{!?-k:vmlinuz}-virt.efi.hmac\
%ghost /%{image_install_path}/efi/EFI/Linux/%{?-k:%{-k*}}%{!?-k:*}-%{KVERREL}%{?3:+%{3}}.efi\
%{expand:%%files %{?3:%{3}-}uki-virt-addons}\
/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-virt.efi.extra.d/ \
/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-virt.efi.extra.d/*.addon.efi\
%endif\
%endif\
%if %{?3:1} %{!?3:0}\
%{expand:%%files %{3}}\
%endif\
%if %{with_gcov}\
%ifnarch %nobuildarches noarch\
%{expand:%%files -f kernel-%{?3:%{3}-}gcov.list %{?3:%{3}-}gcov}\
%endif\
%endif\
%endif\
%{nil}

%kernel_variant_files %{_use_vdso} %{with_up}
%kernel_variant_files %{_use_vdso} %{with_debug} debug
%if %{with_arm64_64k}
%kernel_variant_files %{_use_vdso} %{with_debug} 64k-debug
%endif
%kernel_variant_files %{_use_vdso} %{with_realtime} rt
%if %{with_realtime}
%kernel_variant_files %{_use_vdso} %{with_debug} rt-debug
%endif
%if %{with_debug_meta}
%files debug
%files debug-core
%files debug-devel
%files debug-devel-matched
%files debug-modules
%files debug-modules-core
%files debug-modules-extra
%if %{with_arm64_64k}
%files 64k-debug
%files 64k-debug-core
%files 64k-debug-devel
%files 64k-debug-devel-matched
%files 64k-debug-modules
%files 64k-debug-modules-extra
%endif
%endif
%kernel_variant_files %{use_vdso} %{with_pae} lpae
%kernel_variant_files %{_use_vdso} %{with_zfcpdump} zfcpdump
%kernel_variant_files %{_use_vdso} %{with_arm64_64k} 64k

%define kernel_variant_ipaclones(k:) \
%if %{1}\
%if %{with_ipaclones}\
%{expand:%%files %{?2:%{2}-}ipaclones-internal}\
%defattr(-,root,root)\
%defverify(not mtime)\
/usr/src/kernels/%{KVERREL}%{?2:+%{2}}-ipaclones\
%endif\
%endif\
%{nil}

%kernel_variant_ipaclones %{with_up}

# plz don't put in a version string unless you're going to tag
# and build.
#
#
%changelog
* Sat Sep 21 2024 Luca Magrone <luca@magrone.cc> [5.14.0-508.rk35x.el9]
- redhat: configs: compile drm stack as a module (Luca Magrone)
- redhat: configs: update SND configs and DRM_KMS_HELPERS (Luca Magrone)
- redhat: configs: build rockchip drm and panfrost as modules (Luca Magrone)
- redhat: configs: add required options (Luca Magrone)
- redhat: configs: disable AST server chips (Luca Magrone)
- redhat: configs: remove CONFIG_CONFIG_ARCH_ROCKCHIP (Luca Magrone)
- redhat: configs: use the same configs as last working version (Luca Magrone)
- kernel.spec: add posttrans script for pine64 (Luca Magrone)
- Add configuration entries for Quartz64 (Luca Magrone)
- drm/panfrost: Fix the error path in panfrost_mmu_map_fault_addr() (Boris Brezillon)
- drm/panfrost: fix power transition timeout warnings (Christian Hewitt)
- drm/panfrost: Only display fdinfo's engine and cycle tags when profiling is on (Adrián Larumbe)
- drm/panfrost: Replace fdinfo's profiling debugfs knob with sysfs (Adrián Larumbe)
- drm/panfrost: Synchronize and disable interrupts before powering off (AngeloGioacchino Del Regno)
- drm/panfrost: Add gpu_irq, mmu_irq to struct panfrost_device (AngeloGioacchino Del Regno)
- drm/panfrost: Ignore core_mask for poweroff and disable PWRTRANS irq (AngeloGioacchino Del Regno)
- drm/panfrost: Fix incorrect updating of current device frequency (Adrián Larumbe)
- drm/panfrost: Consider dma-buf imported objects as resident (Adrián Larumbe)
- drm/panfrost: Set regulators on/off during system sleep on MediaTek SoCs (AngeloGioacchino Del Regno)
- drm/panfrost: Implement ability to turn on/off regulators in suspend (AngeloGioacchino Del Regno)
- drm/panfrost: Set clocks on/off during system sleep on MediaTek SoCs (AngeloGioacchino Del Regno)
- drm/panfrost: Implement ability to turn on/off GPU clocks in suspend (AngeloGioacchino Del Regno)
- drm: panfrost: Remove #ifdef guards for PM related functions (Paul Cercueil)
- drm/panfrost: Tighten polling for soft reset and power on (AngeloGioacchino Del Regno)
- drm/panfrost: Perform hard reset to recover GPU if soft reset fails (AngeloGioacchino Del Regno)
- drm/panfrost: Really power off GPU cores in panfrost_gpu_power_off() (AngeloGioacchino Del Regno)
- drm/sched: implement dynamic job-flow control (Danilo Krummrich)
- drm/sched: Convert drm scheduler to use a work queue rather than kthread (Matthew Brost)
- drm/panfrost: Remove incorrect IS_ERR() check (Steven Price)
- drm: Continue converting the GPU scheduler to variable number of run-queues (Luben Tuikov)
- drm/panfrost: Implement generic DRM object RSS reporting function (Adrián Larumbe)
- drm/panfrost: Add fdinfo support for memory stats (Adrián Larumbe)
- drm/panfrost: Add fdinfo support GPU load metrics (Adrián Larumbe)
- sound: soc: hdmi-codec: include drm_eld.h (Jani Nikula)
- iommu: constify of_phandle_args in xlate (Krzysztof Kozlowski)
- iommu/rockchip: Update to {map,unmap}_pages (Robin Murphy)
- iommu/rockchip: Convert to generic_single_device_group() (Jason Gunthorpe)
- iommu: Convert simple drivers with DOMAIN_DMA to domain_alloc_paging() (Jason Gunthorpe)
- iommu: rockchip: Allow an IDENTITY domain as the default_domain in ARM32 (Jason Gunthorpe)
- iommu: rockchip: Add iommu_ops->identity_domain (Jason Gunthorpe)
- drivers: replace vma->vm_flags direct modifications with modifier calls (Suren Baghdasaryan)
- Revert "leds: ledtrig-tty: Add additional line state evaluation" (Luca Magrone)
- clk: rockchip: Remove values for mmask and nmask in struct clk_fractional_divider (Christophe JAILLET)
- pinctrl: rk805: drop the wrapper around pinctrl_gpio_direction_input() (Bartosz Golaszewski)
- gpio: rockchip: rename pinctrl_gpio_direction_output_new() (Bartosz Golaszewski)
- gpio: rockchip: rename pinctrl_gpio_direction_input_new() (Bartosz Golaszewski)
- pinctrl: rk805: use new pinctrl GPIO helpers (Bartosz Golaszewski)
- gpio: rockchip: use new pinctrl GPIO helpers (Bartosz Golaszewski)
- gpio: rockchip: Convert to platform remove callback returning void (Uwe Kleine-König)
- gpio: Explicitly include correct DT includes (Rob Herring)
- gpio: rockchip: Do not mention legacy API in the code (Andy Shevchenko)
- drm: Clear fd/handle callbacks in struct drm_driver (Thomas Zimmermann)
- drm: Remove struct drm_driver.gem_prime_mmap (Thomas Zimmermann)
- drm/rockchip: Convert to platform remove callback returning void (Uwe Kleine-König)
- ASoC: rockchip: rockchip_spdif: Convert to platform remove callback returning void (Uwe Kleine-König)
- firmware: arm_scmi: Set fwnode for the scmi_device (Saravana Kannan)
- firmware: arm_scmi: Fix incorrect error propagation in scmi_voltage_descriptors_get (Ludvig Pärsson)
- firmware: arm_scmi: Relax base protocol sanity checks on the protocol list (Cristian Marussi)
- clk: rockchip: use proper crypto0 name on rk3399 (Corentin Labbe)
- arm64: dts: rockchip: use correct reset names for rk3399 crypto nodes (Corentin Labbe)
- drm/rockchip: vop2: Add more supported 10bit formats (Andy Yan)
- drm/rockchip: vop2: remove the unsupported format of cluster window (Andy Yan)
- drm/rockchip: vop: fix format bpp calculation (Andy Yan)
- drm/rockchip: remove NR_LAYERS macro on vop2 (Andy Yan)
- drm/rockchip: remove unused struct in vop2 (Andy Yan)
- drm/rockchip: vop2: Demote message in mod_supported to drm_dbg_kms (Michael Tretter)
- drm/rockchip: vop2: Add missing call to crtc reset helper (Jonas Karlman)
- drm/rockchip: vop2: Don't crash for invalid duplicate_state (Jonas Karlman)
- drm/panfrost: Add cycle count GPU register definitions (Adrián Larumbe)
- drm/panfrost: Do not check for 0 return after calling platform_get_irq_byname() (Ruan Jinjie)
- drm/rockchip: Fix type promotion bug in rockchip_gem_iommu_map() (Dan Carpenter)
- iommu: rockchip: Allocate tables from all available memory for IOMMU v2 (Jonas Karlman)
- iommu: rockchip: Fix directory table address encoding (Jonas Karlman)
- iommu/rockchip: Fix unwind goto issue (Chao Wang)
- iommu/rockchip: Add missing set_platform_dma_ops callback (Steven Price)
- thermal/drivers/rockchip: Switch to new of API (Daniel Lezcano)
- iommu: fix clean up bus_set_iommu() (Robin Murphy)
- iommu: fix detach_dev callbacks (Lu Baolu)
- gpio: rockchip: fix duplicate of_node assignment (Andy Shevchenko)
- pinctrl: Propagate firmware node from a parent device (Andy Shevchenko)
- drm/rockchip: Don't spam logs in atomic check (Daniel Stone)
- drm/rockchip: Replace all non-returning strlcpy with strscpy (Azeem Shaikh)
- drm/rockchip: vop: Leave vblank enabled in self-refresh (Brian Norris)
- drm/rockchip: cdn-dp: call drm_connector_update_edid_property() unconditionally (Jani Nikula)
- drm/rockchip: vop2: Use regcache_sync() to fix suspend/resume (Sascha Hauer)
- drm/rockchip: vop2: fix suspend/resume (Sascha Hauer)
- drm/aperture: Remove primary argument (Daniel Vetter)
- drm/rockchip: vop2: Add error check to devm_regmap_init_mmio (Alfredo Cruz)
- drm/rockchip: dw_hdmi: cleanup drm encoder during unbind (Toby Chen)
- drm/rockchip: vop2: fix uninitialized variable possible_crtcs (Tom Rix)
- drm/rockchip: vop2: add polarity flags to RGB output (Gerald Loacker)
- drm/rockchip: vop2: use struct_size() in vop2_bind (Jacob Keller)
- drm/rockchip: dw_hdmi: discard modes with unachievable pixelclocks (Sascha Hauer)
- drm/rockchip: dw_hdmi: Add support for 4k@30 resolution (Sascha Hauer)
- drm/rockchip: dw_hdmi: relax mode_valid hook (Sascha Hauer)
- drm/rockchip: vop: limit maximum resolution to hardware capabilities (Sascha Hauer)
- drm/rockchip: dsi: Remove the unused function dsi_read() (Jiapeng Chong)
- drm/rockchip: Drop unbalanced obj unref (Rob Clark)
- drm/rockchip: avoid duplicate mappings for IOMMU devices (John Keeping)
- drm/rockchip: vop: Quiet always-warning AFBC log (Brian Norris)
- drm/rockchip: vop2: add support for the rgb output block (Michael Riesch)
- drm/rockchip: vop2: use symmetric function pair vop2_{create,destroy}_crtcs (Michael Riesch)
- drm/rockchip: rgb: add video_port parameter to init function (Michael Riesch)
- drm/rockchip: rgb: embed drm_encoder into rockchip_encoder (Michael Riesch)
- drm/rockchip: vop2: initialize possible_crtcs properly (Michael Riesch)
- drm/rockchip: Remove unnecessary include statements for drm_crtc_helper.h (Thomas Zimmermann)
- drm/fb-helper: continue removing unnecessary include statements (Thomas Zimmermann)
- drm/fb-helper: fix fbdev emulation header in some drivers (Thomas Zimmermann)
- drm/rockchip: Don't set struct drm_driver.output_poll_changed (Thomas Zimmermann)
- drm/rockchip: use pm_runtime_resume_and_get() instead of pm_runtime_get_sync() (Yuan Can)
- drm/rockchip: dsi: Remove the unused function dsi_update_bits() (Jiapeng Chong)
- drm/rockchip: vop2: Register Esmart0-win0 as primary plane (Sascha Hauer)
- drm: rockchip: remove rockchip_drm_framebuffer_init() function (Johan Jonker)
- drm/panfrost: Skip speed binning on EOPNOTSUPP (David Michael)
- drm/panfrost: Sync IRQ by job's timeout handler (Dmitry Osipenko)
- drm/{panfrost,lima}: Switch to reservation lock (Dmitry Osipenko)
- drm/panfrost: Fix the panfrost_mmu_map_fault_addr() error path (Boris Brezillon)
- drm/panfrost: Add basic support for speed binning (AngeloGioacchino Del Regno)
- drm/panfrost: Add support for Mali on the MT8186 SoC (AngeloGioacchino Del Regno)
- drm/panfrost: Add new compatible for Mali on the MT8183 SoC (AngeloGioacchino Del Regno)
- drm/panfrost: Add mediatek,mt8192-mali compatible (Alyssa Rosenzweig)
- drm/panfrost: Add the MT8192 GPU ID (Alyssa Rosenzweig)
- drm/panfrost: Increase MAX_PM_DOMAINS to 5 (Alyssa Rosenzweig)
- drm/{panfrost,lima}: Revert "drm/shmem-helper: Switch to reservation lock" (Thomas Zimmermann)
- drm/shmem-helper: Switch to reservation lock (Dmitry Osipenko)
- drm/panfrost: Don't sync rpm suspension after mmu flushing (Dmitry Osipenko)
- drm/panfrost: fix GENERIC_ATOMIC64 dependency (Arnd Bergmann)
- drm/todo: remove task to rename CMA helpers (Danilo Krummrich)
- drm/gem: continue renaming struct drm_gem_dma_object.{paddr => dma_addr} (Danilo Krummrich)
- drm/gem: rename GEM CMA helpers is some drivers (Danilo Krummrich)
- drm/fb: rename FB CMA helpers in some drivers (Danilo Krummrich)
- drm/fb: continue removing unused includes of drm_fb_cma_helper.h (Danilo Krummrich)
- dt-bindings: ata: ahci: Add platform capability properties (Serge Semin)
- dt-bindings: reset: add rk3588 reset definitions (Sebastian Reichel)
- dt-bindings: power: add power-domain header for rk3588 (Finley Xiao)
- dt-bindings: clock: add rk3588 clock definitions (Sebastian Reichel)
- dt-bindings: devfreq: event: rockchip,dfi: Add rk3568 support (Sascha Hauer)
- dt-bindings: devfreq: event: convert Rockchip DFI binding to yaml (Sascha Hauer)
- arm64: dts: rockchip: rk356x: Add DFI (Sascha Hauer)
- arm64: dts: rockchip: rk3399: Enable DFI (Sascha Hauer)
- PM / devfreq: rockchip-dfi: Add perf support (Sascha Hauer)
- PM / devfreq: rockchip-dfi: Prepare for multiple users (Sascha Hauer)
- PM / devfreq: rockchip-dfi: Pass private data struct to internal functions (Sascha Hauer)
- PM / devfreq: rockchip-dfi: Handle LPDDR4X (Sascha Hauer)
- PM / devfreq: rockchip-dfi: Handle LPDDR2 correctly (Sascha Hauer)
- PM / devfreq: rockchip-dfi: Add RK3568 support (Sascha Hauer)
- PM / devfreq: rockchip-dfi: Clean up DDR type register defines (Sascha Hauer)
- PM / devfreq: rk3399_dmc,dfi: generalize DDRTYPE defines (Sascha Hauer)
- PM / devfreq: rockchip-dfi: introduce channel mask (Sascha Hauer)
- PM / devfreq: rockchip-dfi: Use free running counter (Sascha Hauer)
- PM / devfreq: rockchip-dfi: dfi store raw values in counter struct (Sascha Hauer)
- PM / devfreq: rockchip-dfi: Add SoC specific init function (Sascha Hauer)
- PM / devfreq: rockchip-dfi: Make pmu regmap mandatory (Sascha Hauer)
- PM / devfreq: rockchip-dfi: use consistent name for private data struct (Sascha Hauer)
- PM / devfreq: rockchip-dfi: Embed desc into private data struct (Sascha Hauer)
- arm64: dts: rockchip: rk3399: add crypto node (Corentin Labbe)
- arm64: dts: rockchip: enable gamma control on RK3399 (Hugh Cole-Baker)
- arm64: dts: rockchip: use BCLK to GPIO switch on rk3399 (Judy Hsiao)
- arm64: dts: rockchip: Assign RK3399 VDU clock rate (Brian Norris)
- arm64: dts: rockchip: rename HDMI ref clock to 'ref' on rk3399 (Sascha Hauer)
- arm64: dts: rockchip: add an input enable pinconf to rk3399 (Caleb Connolly)
- arm64: dts: rockchip: Add dfi and dmc nodes to rk3399 (Lin Huang)
- arm64: dts: rockchip: add clocks property to cru nodes rk3399 (Johan Jonker)
- arm64: dts: rockchip: use generic node name for pmucru on rk3399 (Johan Jonker)
- arm64: dts: rockchip: Move drive-impedance-ohm to emmc phy on rk3399 (Shawn Lin)
- arm64: dts: rockchip: reorder rk3399 hdmi clocks (Sascha Hauer)
- arm64: dts: rockchip: Add idle cooling devices to rk3399 (Daniel Lezcano)
- arm64: dts: rockchip: change gpio nodenames (Johan Jonker)
- arm64: dts: rockchip: add Coresight debug range for RK3399 (Brian Norris)
- arm64: dts: rockchip: Re-add interrupt-names for RK3399's vpu (Alex Bee)
- arm64: dts: rockchip: add isp1 node on rk3399 (Heiko Stuebner)
- arm64: dts: rockchip: add cif clk-control pinctrl for rk3399 (Heiko Stuebner)
- arm64: dts: rockchip: add #phy-cells to mipi-dsi1 on rk3399 (Heiko Stuebner)
- arm64: dts: rockchip: remove interrupt-names from iommu nodes (Johan Jonker)
- PM / devfreq: rk3399_dmc: Block PMU during transitions (Brian Norris)
- PM / devfreq: rk3399_dmc: Avoid static (reused) profile (Brian Norris)
- PM / devfreq: rk3399_dmc: Use devm_pm_opp_of_add_table() (Brian Norris)
- PM / devfreq: rk3399_dmc: Disable edev on remove() (Brian Norris)
- PM / devfreq: rk3399_dmc: Support new *-ns properties (Brian Norris)
- PM / devfreq: rk3399_dmc: Support new disable-freq properties (Brian Norris)
- PM / devfreq: rk3399_dmc: Use bitfield macro definitions for ODT_PD (Brian Norris)
- PM / devfreq: rk3399_dmc: Drop excess timing properties (Brian Norris)
- PM / devfreq: rk3399_dmc: Drop undocumented ondemand DT props (Brian Norris)
- PM / devfreq: rockchip-dfi: Fix an error message (Christophe JAILLET)
- pwm: rockchip: Convert to use dev_err_probe() (zhaoxiao)
- pwm: rockchip: Unprepare clocks only after the PWM was unregistered (Uwe Kleine-König)
- pwm: rockchip: Don't modify HW state in .remove() callback (Uwe Kleine-König)
- iommu/rockchip: fix permission bits in page table entries v2 (Michael Riesch)
- iommu/rockchip: : Use standard driver registration (Robin Murphy)
- iommu/rockchip: Fix PAGE_DESC_HI_MASKs for RK3568 (Alex Bee)
- iommu/rockchip: Drop IOVA cookie management (Robin Murphy)
- spi: rockchip: Unmask IRQ at the final to avoid preemption (Jon Lin)
- spi: rockchip: fix missing error on unsupported SPI_CS_HIGH (Luca Ceresoli)
- spi: rockchip-sfc: fix platform_get_irq.cocci warning (Yihao Han)
- spi: rockchip: clear interrupt status in error handler (Jon Lin)
- spi: rockchip: Suspend and resume the bus during NOIRQ_SYSTEM_SLEEP_PM ops (shengfei Xu)
- spi: rockchip: Preset cs-high and clk polarity in setup progress (Jon Lin)
- spi: rockchip: Stop spi slave dma receiver when cs inactive (Jon Lin)
- spi: rockchip: terminate dma transmission when slave abort (Jon Lin)
- spi: rockchip: Fix error in getting num-cs property (Jon Lin)
- spi: rockchip: handle zero length transfers without timing out (Tobias Schramm)
- spi: rockchip-sfc: Fix assigned but never used return error codes (Colin Ian King)
- spi: rockchip-sfc: Remove redundant IO operations (Jon Lin)
- spi: rockchip-sfc: add rockchip serial flash controller (Chris Morgan)
- i2c: rk3x: Handle a spurious start completion interrupt flag (Ondrej Jirman)
- i2c: rk3x: enable clock before getting rate (John Keeping)
- Revert "clk: rockchip: add clock controller for the RK3588" (Luca Magrone)
- clk: rockchip: Fix memory leak in rockchip_clk_register_pll() (Xiu Jianfeng)
- clk: rockchip: add clock controller for the RK3588 (Elaine Zhang)
- clk: rockchip: add lookup table support (Sebastian Reichel)
- clk: rockchip: simplify rockchip_clk_add_lookup (Sebastian Reichel)
- clk: rockchip: allow additional mux options for cpu-clock frequency changes (Elaine Zhang)
- clk: rockchip: add pll type for RK3588 (Elaine Zhang)
- clk: rockchip: add register offset of the cores select parent (Elaine Zhang)
- clk: rockchip: Add clock controller support for RV1126 SoC (Jagan Teki)
- clk: rockchip: Add MUXTBL variant (Elaine Zhang)
- clk: rockchip: Mark hclk_vo as critical on rk3568 (Sascha Hauer)
- clk/rockchip: Use of_device_get_match_data() (Minghao Chi (CGEL ZTE))
- clk: rockchip: Add CLK_SET_RATE_PARENT to the HDMI reference clock on rk3568 (Sascha Hauer)
- clk: rockchip: drop CLK_SET_RATE_PARENT from dclk_vop* on rk3568 (Sascha Hauer)
- clk: rockchip: Add more PLL rates for rk3568 (Sascha Hauer)
- clk: rockchip: drop module parts from rk3399 and rk3568 drivers (Heiko Stuebner)
- Revert "clk: rockchip: use module_platform_driver_probe" (Heiko Stuebner)
- clk: rockchip: use module_platform_driver_probe (Miles Chen)
- clk: rockchip: rk3399: expose PCLK_COREDBG_{B,L} (Brian Norris)
- clk: rockchip: rk3399: make CPU clocks critical (Brian Norris)
- clk: rockchip: make rk3308 ddrphy4x clock critical (Yunhao Tian)
- clk: rockchip: drop GRF dependency for rk3328/rk3036 pll types (Peter Geis)
- clk: rockchip: Add support for hclk_sfc on rk3036 (Jon Lin)
- clk: rockchip: rk3036: fix up the sclk_sfc parent error (Jon Lin)
- thermal/drivers/rockchip_thermal: Allow more resets for tsadc node (Johan Jonker)
- mfd: rk808: Permit having multiple PMIC instances (Neil Armstrong)
- mfd: rk808: Convert to i2c's .probe_new() (Uwe Kleine-König)
- mfd: rk808: Add Rockchip rk817 battery charger support (Chris Morgan)
- mfd: rk808: Add reboot support to rk808.c (Peter Geis)
- mfd: rk808: Add support for power off on RK817 (Ondrej Jirman)
- drm/rockchip: vop2: disable planes when disabling the crtc (Michael Tretter)
- drm/rockchip: vop2: fix null pointer in plane_atomic_disable (Michael Tretter)
- drm/rockchip: dsi: Fix VOP selection on SoCs that support it (Ondrej Jirman)
- drm/rockchip: fix fbdev on non-IOMMU devices (John Keeping)
- drm/rockchip: dsi: Force synchronous probe (Brian Norris)
- drm/rockchip: dsi: Clean up 'usage_mode' when failing to attach (Brian Norris)
- drm/rockchip: dw_hdmi: filter regulator -EPROBE_DEFER error messages (Aurelien Jarno)
- drm/rockchip: remove vop_writel from vop1 driver (Tom Rix)
- drm/rockchip: support gamma control on RK3399 (Hugh Cole-Baker)
- drm/rockchip: define gamma registers for RK3399 (Hugh Cole-Baker)
- drm/rockchip: Fix return type of cdn_dp_connector_mode_valid (Nathan Huckleberry)
- drm/rockchip: dsi: add rk3568 support (Chris Morgan)
- drm/rockchip: vop: fix repeated words in comment (wangjianli)
- drm/rockchip: vop2: Fix eDP/HDMI sync polarities (Sascha Hauer)
- drm: Remove linux/media-bus-format.h from drm_crtc.h (Ville Syrjälä)
- drm/rockchip: Fix an error handling path rockchip_dp_probe() (Christophe JAILLET)
- drm/rockchip: vop: Don't crash for invalid duplicate_state() (Brian Norris)
- drm: Drop drm_blend.h from drm_crtc.h (Ville Syrjälä)
- drm: continue dropping drm_framebuffer.h from drm_crtc.h (Ville Syrjälä)
- drm: Drop drm_edid.h from drm_crtc.h (Ville Syrjälä)
- drm/rockchip: Change register space names in vop2 (Sascha Hauer)
- drm/rockchip: vop2: unlock on error path in vop2_crtc_atomic_enable() (Dan Carpenter)
- drm/rockchip: Fix spelling mistake "aligened" -> "aligned" (Colin Ian King)
- drm/rockchip: remove unneeded semicolon from vop2 driver (Yang Li)
- drm/rockchip: Fix Kconfig dependencies for display-port encoders (Ren Zhijie)
- drm/rockchip: Add VOP2 driver (Andy Yan)
- drm/rockchip: Make VOP driver optional (Sascha Hauer)
- drm/rockchip: dw_hdmi: add regulator support (Sascha Hauer)
- drm/rockchip: dw_hdmi: add rk3568 support (Sascha Hauer)
- drm/rockchip: dw_hdmi: rename vpll clock to reference clock (Sascha Hauer)
- drm/rockchip: Add crtc_endpoint_id to rockchip_encoder (Sascha Hauer)
- drm/rockchip: Embed drm_encoder into rockchip_decoder (Sascha Hauer)
- drm/rockchip: Support YUV formats with U/V swapped (Chen-Yu Tsai)
- drm/rockchip: rk3066_hdmi: Replace drm_detect_hdmi_monitor() with is_hdmi (José Expósito)
- drm/rockchip: inno_hdmi: Replace drm_detect_hdmi_monitor() with is_hdmi (José Expósito)
- drm/rockchip: cdn-dp: change rk3399_cdn_dp from global to static (Tom Rix)
- drm/rockchip: Refactor IOMMU initialisation (Robin Murphy)
- drm/rockchip: vop: fix possible null-ptr-deref in vop_bind() (Yang Yingliang)
- drm/rockchip: Make use of the helper component_compare_dev (Yong Wu)
- drm/rockchip: vop: Correct RK3399 VOP register fields (Brian Norris)
- drm/rockchip: dw_hdmi: Do not leave clock enabled in error case (Sascha Hauer)
- drm/rockchip: cdn-dp: Support HDMI codec plug-change callback (Brian Norris)
- drm/rockchip: Add support for the nomodeset kernel parameter (Javier Martinez Canillas)
- drm/connector: Fix typo in output format (Maxime Ripard)
- drm/rockchip: pass 0 to drm_fbdev_generic_setup() (John Keeping)
- drm/rockchip: use generic fbdev setup (John Keeping)
- drm/rockchip: Implement mmap as GEM object function (Thomas Zimmermann)
- drm/rockchip: dsi: Disable PLL clock on bind error (Brian Norris)
- drm/rockchip: dsi: Fix unbalanced clock on probe error (Brian Norris)
- drm/rockchip: dsi: Reconfigure hardware on resume() (Brian Norris)
- drm/rockchip: dsi: Hold pm-runtime across bind/unbind (Brian Norris)
- drm/rockchip: vop: Add timeout for DSP hold (Brian Norris)
- drm/rockchip: Update crtc fixup to account for fractional clk change (Chris Morgan)
- drm/rockchip: remove of_match_ptr() from analogix dp driver (Souptick Joarder)
- drm/rockchip: remove of_match_ptr() from vop_driver_dt_match (Souptick Joarder)
- drm/rockchip: Check iommu itself instead of it's parent for device_is_available (Andy Yan)
- drm/rockchip: dsi: make hstt_table static (Jiapeng Chong)
- drm/rockchip: dsi: Fix duplicate included linux/phy/phy.h (Jiapeng Chong)
- drm/rockchip: Make use of the helper function devm_platform_ioremap_resource() (Cai Huoqing)
- drm/rockchip: add DRM_BRIDGE_ATTACH_NO_CONNECTOR flag to drm_bridge_attach (Alex Bee)
- drm/rockchip: handle non-platform devices in rockchip_drm_endpoint_is_subdriver (Alex Bee)
- drm/rockchip: remove unused psr_list{,_lock} (Brian Norris)
- drm/rockchip: cdn-dp-core: Make cdn_dp_core_resume __maybe_unused (Arnd Bergmann)
- drm: rockchip: remove reference to non-existing config DRM_RGB (Lukas Bulwahn)
- drm/bridge: Centralize error message when bridge attach fails (Laurent Pinchart)
- drm/rockchip: dsi: add ability to work as a phy instead of full dsi (Heiko Stuebner)
- drm/rockchip: dsi: add own additional pclk handling (Heiko Stuebner)
- drm/aperture: Pass DRM driver structure instead of driver name (Thomas Zimmermann)
- drm/rockchip: Don't set struct drm_device.irq_enabled (Thomas Zimmermann)
- drm/panfrost: fix commit misapplication (Luca Magrone)
- drm/panfrost: Split io-pgtable requests properly (Robin Murphy)
- drm/panfrost: replace endian-specific types with native ones (Steven Price)
- drm/panfrost: devfreq: set opp to the recommended one to configure regulator (Clément Péron)
- drm/panfrost: Update io-pgtable API (Robin Murphy)
- drm/panfrost: Add support for devcoredump (Adrián Larumbe)
- drm/panfrost: Add specific register offset macros for JS and MMU AS (Adrián Larumbe)
- drm/panfrost: Fix shrinker list corruption by madvise IOCTL (Dmitry Osipenko)
- drm/panfrost: Put mapping instead of shmem obj on panfrost_mmu_map_fault_addr() error (Dmitry Osipenko)
- drm/panfrost: Add arm,mali-valhall-jm compatible (Alyssa Rosenzweig)
- drm/panfrost: Add Mali-G57 "Natt" support (Alyssa Rosenzweig)
- drm/panfrost: Don't set L2_MMU_CONFIG quirks (Alyssa Rosenzweig)
- drm/panfrost: Add "clean only safe" feature bit (Alyssa Rosenzweig)
- drm/panfrost: Add HW_ISSUE_TTRX_3485 quirk (Alyssa Rosenzweig)
- drm/panfrost: Handle HW_ISSUE_TTRX_3076 (Alyssa Rosenzweig)
- drm/panfrost: Constify argument to has_hw_issue (Alyssa Rosenzweig)
- drm/panfrost: Handle HW_ISSUE_TTRX_2968_TTRX_3162 (Alyssa Rosenzweig)
- drm/panfrost: Job should reference MMU not file_priv (Steven Price)
- dma-buf: specify usage while adding fences to dma_resv obj v7 (Christian König)
- dma-buf: add enum dma_resv_usage v4 (Christian König)
- dma-buf/drivers: make reserving a shared slot mandatory v4 (Christian König)
- drm/panfrost: cleanup comments (Tom Rix)
- drm/sched: Add device pointer to drm_gpu_scheduler (Jiawei Gu)
- drm/gem-shmem: Set vm_ops in static initializer (Thomas Zimmermann)
- drm/panfrost: Handle IDVS_GROUP_SIZE feature (Alyssa Rosenzweig)
- drm/panfrost: initial dual core group GPUs support (Alexey Sheplyakov)
- drm/panfrost: Merge some feature lists (Alyssa Rosenzweig)
- drm/panfrost: Remove features meant for userspace (Alyssa Rosenzweig)
- drm/panfrost: Check for error num after setting mask (Jiasheng Jiang)
- drm: Return error codes from struct drm_driver.gem_create_object (Thomas Zimmermann)
- drm/shmem-helper: Pass GEM shmem object in public interfaces (Thomas Zimmermann)
- drm/shmem-helper: Export dedicated wrappers for GEM object functions (Thomas Zimmermann)
- drm/panfrost: simplify getting .driver_data (Wolfram Sang)
- panfrost: make mediatek_mt8183_supplies and mediatek_mt8183_pm_domains static (Jiapeng Chong)
- drm/panfrost: Calculate lock region size correctly (Steven Price)
- drm/panfrost: Make use of the helper function devm_platform_ioremap_resource() (Cai Huoqing)
- panfrost: Don't cleanup the job if it was successfully queued (Boris Brezillon)
- drm/panfrost: use scheduler dependency tracking (Daniel Vetter)
- drm/sched: drop entity parameter from drm_sched_push_job (Daniel Vetter)
- drm/sched: Split drm_sched_job_init (Daniel Vetter)
- drm/panfrost: Use upper/lower_32_bits helpers (Alyssa Rosenzweig)
- drm/panfrost: Clamp lock region to Bifrost minimum (Alyssa Rosenzweig)
- drm/panfrost: Use u64 for size in lock_region (Alyssa Rosenzweig)
- drm/panfrost: Simplify lock_region calculation (Alyssa Rosenzweig)
- drm/panfrost: devfreq: Don't display error for EPROBE_DEFER (Chris Morgan)
- drm/panfrost:fix the exception name always "UNKNOWN" (ChunyouTang)
- drm/panfrost: Increase the AS_ACTIVE polling timeout (Boris Brezillon)
- drm/panfrost: Queue jobs on the hardware (Steven Price)
- drm/panfrost: Kill in-flight jobs on FD close (Boris Brezillon)
- drm/panfrost: Don't reset the GPU on job faults unless we really have to (Boris Brezillon)
- drm/panfrost: Reset the GPU when the AS_ACTIVE bit is stuck (Boris Brezillon)
- drm/panfrost: Disable the AS on unhandled page faults (Boris Brezillon)
- drm/panfrost: Make sure job interrupts are masked before resetting (Boris Brezillon)
- drm/panfrost: Simplify the reset serialization logic (Boris Brezillon)
- drm/panfrost: Use a threaded IRQ for job interrupts (Boris Brezillon)
- drm/panfrost: Expose a helper to trigger a GPU reset (Boris Brezillon)
- drm/panfrost: Do the exception -> string translation using a table (Boris Brezillon)
- drm/panfrost: Drop the pfdev argument passed to panfrost_exception_name() (Boris Brezillon)
- drm/panfrost: Get rid of the unused JS_STATUS_EVENT_ACTIVE definition (Boris Brezillon)
- drm/panfrost: Make ->run_job() return an ERR_PTR() when appropriate (Boris Brezillon)
- drm/sched: Allow using a dedicated workqueue for the timeout/fault tdr (Boris Brezillon)
- drm/panfrost: Make sure MMU context lifetime is not bound to panfrost_priv (Boris Brezillon)
- drm/panfrost: Fix implicit sync (Daniel Vetter)
- drm/panfrost: Use xarray and helpers for depedency tracking (Daniel Vetter)
- drm/panfrost: Shrink sched_lock (Daniel Vetter)
- drm/panfrost: Fix missing clk_disable_unprepare() on error in panfrost_clk_init() (Wei Yongjun)
- ARM: rockchip: Add missing of_node_put() in rockchip_suspend_init() (Liang He)
- ARM: rockchip: fix typos in comments (Julia Lawall)
- ARM: rockchip: Use memcpy_toio instead of memcpy on smp bring-up (Ivan T. Ivanov)
- ARM64: dts: rk356x: add crypto node (Luca Magrone)
- ARM64: dts: rk3568: add crypto node (Corentin Labbe)
- crypto: rockchip: support the new crypto IP for rk3568/rk3588 (Corentin Labbe)
- dt-bindings: crypto: add support for rockchip,crypto-rk3588 (Corentin Labbe)
- crypto: rockchip: move kconfig to its dedicated directory (Corentin Labbe)
- soc: rockchip: io-domain: add rk3568 support (Jianqun Xu)
- phy: rockchip-inno-usb2: Fix missing clk_disable_unprepare() in rockchip_usb2phy_power_on() (Shang XiaoJing)
- phy: rockchip-snps-pcie3: Use devm_platform_get_and_ioremap_resource() (Yang Yingliang)
- phy: rockchip: inno-dsidphy: Add support for rk3568 (Chris Morgan)
- phy: rockchip-inno-usb2: Return zero after otg sync (Peter Geis)
- phy: rockchip: add support for the rk356x variant to rockchip-inno-csidphy (Michael Riesch)
- phy: rockchip-inno-usb2: Ignore OTG IRQs in host mode (Samuel Holland)
- phy: rockchip-inno-usb2: Sync initial otg state (Peter Geis)
- phy: rockchip-inno-usb2: Prevent incorrect error on probe (Peter Geis)
- phy: rockchip-inno-usb2: Clean up some inconsistent indenting (Jiapeng Chong)
- phy: rockchip-inno-usb2: Handle ID IRQ (Samuel Holland)
- phy: rockchip-inno-usb2: Handle bvalid falling (Samuel Holland)
- phy: rockchip-inno-usb2: Support multi-bit mask properties (Samuel Holland)
- phy: rockchip-inno-usb2: Do not lock in bvalid IRQ handler (Samuel Holland)
- phy: rockchip-inno-usb2: Do not check bvalid twice (Samuel Holland)
- phy: rockchip-inno-usb2: Fix muxed interrupt support (Samuel Holland)
- phy/rockchip: Use of_device_get_match_data() (Minghao Chi (CGEL ZTE))
- phy/rockchip: Use of_device_get_match_data() (Minghao Chi (CGEL ZTE))
- phy: rockchip: add naneng combo phy for RK3568 (Yifeng Zhao)
- phy: dphy: Correct clk_pre parameter (Liu Ying)
- phy: phy-rockchip-inno-usb2: add rk3568 support (Peter Geis)
- phy: phy-rockchip-inno-usb2: support muxed interrupts (Peter Geis)
- phy: phy-rockchip-inno-usb2: support standalone phy nodes (Peter Geis)
- phy: phy-rockchip-inno-usb2: support #address_cells = 2 (Peter Geis)
- phy: rockchip-inno-usb2: remove redundant assignment to variable delay (Colin Ian King)
- phy: rockchip-inno-usb2: Make use of the helper function devm_add_action_or_reset() (Cai Huoqing)
- phy: rockchip-inno-usb2: fix for_each_child.cocci warnings (kernel test robot)
- Revert "pinctrl/rockchip: Switch to use devm_kasprintf_strarray()" (Luca Magrone)
- gpio/rockchip: fix refcount leak in rockchip_gpiolib_register() (Wang Yufen)
- pinctrl: rockchip: list all pins in a possible mux route for PX30 (Quentin Schulz)
- gpio: rockchip: request GPIO mux to pinctrl when setting direction (Quentin Schulz)
- pinctrl: rockchip: add pinmux_ops.gpio_set_direction callback (Quentin Schulz)
- gpio/rockchip: Convert to generic_handle_domain_irq() (Jeffy Chen)
- pinctrl: rockchip: Enhance support for IRQ_TYPE_EDGE_BOTH (João H. Spies)
- pinctrl: rockchip: Add RV1126 pinctrl support (Jagan Teki)
- gpio: rockchip: add support for rk3588 (Jianqun Xu)
- pinctrl/rockchip: add rk3588 support (Jianqun Xu)
- pinctrl/rockchip: add error handling for pull/drive register getters (Sebastian Reichel)
- pinctrl: rockchip: sort the rk3308_mux_recalced_data entries (Luca Ceresoli)
- pinctrl: rockchip: fix RK3308 pinmux bits (Luca Ceresoli)
- gpio/rockchip: handle deferring input-enable pinconfs (Caleb Connolly)
- pinctrl/rockchip: support setting input-enable param (Caleb Connolly)
- pinctrl/rockchip: support deferring other gpio params (Caleb Connolly)
- pinctrl/rockchip: Add missing of_node_put() in rockchip_pinctrl_probe (Miaoqian Lin)
- gpio: rockchip: Reset int_bothedge when changing trigger (Samuel Holland)
- drivers/pcmcia: Fix ifdef covering yenta_pm_ops (Paul E. McKenney)
- gpio: rockchip: lock GPIOs used as interrupts (John Keeping)
- pinctrl/rockchip: fix gpio device creation (John Keeping)
- pinctrl/rockchip: Switch to use devm_kasprintf_strarray() (Andy Shevchenko)
- pinctrl/rockchip: Convert to use dev_err_probe() (Andy Shevchenko)
- pinctrl/rockchip: Make use of the devm_platform_get_and_ioremap_resource() (Andy Shevchenko)
- pinctrl/rockchip: Use temporary variable for struct device (Andy Shevchenko)
- pinctrl/rockchip: Drop wrong kernel doc annotation (Andy Shevchenko)
- watchdog/sb_watchdog: fix compilation problem due to COMPILE_TEST (Jackie Liu)
- gpio/rockchip: fix get_direction value handling (Heiko Stuebner)
- gpio/rockchip: extended debounce support is only available on v2 (Heiko Stuebner)
- gpio/rockchip: fetch deferred output settings on probe (Heiko Stuebner)
- pinctrl/rockchip: add a queue for deferred pin output settings on probe (Heiko Stuebner)
- pinctrl/rockchip: drop the gpio related codes (Jianqun Xu)
- gpio/rockchip: drop irq_gc_lock/irq_gc_unlock for irq set type (Jianqun Xu)
- gpio/rockchip: support next version gpio controller (Jianqun Xu)
- gpio/rockchip: use struct rockchip_gpio_regs for gpio controller (Jianqun Xu)
- gpio/rockchip: add driver for rockchip gpio (Jianqun Xu)
- pinctrl/rockchip: add pinctrl device to gpio bank struct (Jianqun Xu)
- pinctrl/rockchip: separate struct rockchip_pin_bank to a head file (Jianqun Xu)
- pinctrl/rockchip: always enable clock for gpio controller (Jianqun Xu)
- arm64: dts: rockchip: add DT entry for RNG to RK356x (Aurelien Jarno)
- hwrng: add Rockchip SoC hwrng driver (Aurelien Jarno)
- dt-bindings: RNG: Add Rockchip RNG bindings (Aurelien Jarno)
- dt-bindings: arm: rockchip: Add Pine64 SoQuartz SoM (Peter Geis)
- dt-bindings: arm: rockchip: Add Pine64 Quartz64 Model B (Peter Geis)
- arm64: dts: rockchip: Add NanoPC T6 PCIe Ethernet support (John Clark)
- arm64: dts: rockchip: add rk3588 PCIe2 support (Sebastian Reichel)
- arm64: dts: rockchip: Add NanoPC T6 (Thomas McKahan)
- arm64: dts: rockchip: Enable SATA on Radxa E25 (Jonas Karlman)
- arm64: dts: rockchip: Fix PCIe regulators on Radxa E25 (Jonas Karlman)
- arm64: dts: rockchip: add PCIe3 support for rk3588 (Sebastian Reichel)
- arm64: dts: rockchip: fix/update sdmmc properties for rock-5a and -5b (FUKAUMI Naoki)
- arm64: dts: rockchip: add USB2 to rk3588s-rock5a (Sebastian Reichel)
- arm64: dts: rockchip: add USB2 to rk3588-rock5b (Sebastian Reichel)
- arm64: dts: rockchip: add USB2 to rk3588-evb1 (Sebastian Reichel)
- arm64: dts: rockchip: add USB2 support for rk3588 (Sebastian Reichel)
- arm64: dts: rockchip: Enable RS485 for edgeble-neu6b (Jagan Teki)
- arm64: dts: rockchip: Enable RS232 for edgeble-neu6b (Jagan Teki)
- arm64: dts: rockchip: Enable PWM FAN for edgeble-neu6b (Jagan Teki)
- arm64: dts: rockchip: Enable RTC for edgeble-neu6b (Jagan Teki)
- arm64: dts: rockchip: Enable SATA for edgeble-neu6b (Jagan Teki)
- arm64: dts: rockchip: Add microSD card for edgeble-neu6b (Jagan Teki)
- arm64: dts: rockchip: Add PMIC for edgeble-neu6b (Jagan Teki)
- arm64: dts: rockchip: enable SATA on rk3588-evb1 (Sebastian Reichel)
- arm64: dts: rockchip: add SATA support to rk3588 (Sebastian Reichel)
- arm64: dts: rockchip: add combo PHYs to rk3588 (Sebastian Reichel)
- arm64: dts: rockchip: add dts for Firefly Station P2 aka rk3568-roc-pc (Furkan Kardame)
- arm64: dts: rockchip: Drop unchanged max-frequency from rk3588 boards (Jagan Teki)
- arm64: dts: rockchip: add fan support to rock-5a (Sebastian Reichel)
- arm64: dts: rockchip: add SARADC to rock-5a (Sebastian Reichel)
- arm64: dts: rockchip: enable I2C interface from DSI and CSI connectors on rock-5a (Sebastian Reichel)
- arm64: dts: rockchip: add vdd_npu_s0 regulator to rock-5a (Sebastian Reichel)
- arm64: dts: rockchip: add I2C EEPROM to rock-5a (Sebastian Reichel)
- arm64: dts: rockchip: add analog audio to rock-5a (Sebastian Reichel)
- arm64: dts: rockchip: add status LED to rock-5a (Sebastian Reichel)
- arm64: dts: rockchip: add SD card support to rock-5a (Lucas Tanure)
- arm64: dts: rockchip: add 5V regulator to rock-5a (Sebastian Reichel)
- arm64: dts: rockchip: add vdd_cpu_big regulators to rock-5a (Sebastian Reichel)
- arm64: dts: rockchip: add PMIC to rock-5a (Sebastian Reichel)
- arm64: dts: rockchip: minor whitespace cleanup around '=' (Krzysztof Kozlowski)
- arm64: dts: rockchip: add missing space before { on indiedroid nova (Krzysztof Kozlowski)
- arm64: dts: rockchip: correct wifi interrupt flag in Box Demo (Krzysztof Kozlowski)
- arm64: dts: rockchip: Update sound card label on rk3588-rock-5b (Cristian Ciocaltea)
- arm64: dts: rockchip: Drop invalid regulator-init-microvolt property (Cristian Ciocaltea)
- arm64: dts: rockchip: Add saradc node to rock5b (Shreeya Patel)
- arm64: dts: rockchip: Fix compatible for Bluetooth on rk3566-anbernic (Chris Morgan)
- arm64: dts: rockchip: Add SD card support to rock-5b (Lucas Tanure)
- arm64: dts: rockchip: add PMIC to rock-5b (Sebastian Reichel)
- arm64: dts: rockchip: Assign ES8316 MCLK rate on rk3588-rock-5b (Cristian Ciocaltea)
- arm64: dts: rockchip: Add Indiedroid Nova board (Chris Morgan)
- arm64: dts: rockchip: Add sdio node to rk3588 (Chris Morgan)
- arm64: dts: rockchip: add default pinctrl for rk3588 emmc (Chris Morgan)
- arm64: dts: rockchip: Fix rk356x PCIe register and range mappings (Andrew Powers-Holmes)
- arm64: dts: rockchip: Add DT node for ADC support in RK3588 (Shreeya Patel)
- arm64: dts: rockchip: add PMIC to rk3588-evb1 (Sebastian Reichel)
- arm64: dts: rockchip: Add rk3588 Edgeble Neu6 Model B IO (Jagan Teki)
- arm64: dts: rockchip: Add rk3588 Edgeble Neu6 Model B SoM (Jagan Teki)
- arm64: dts: rockchip: Add Rockchip RK3588J (Jagan Teki)
- arm64: dts: rockchip: Add RGA2 support to rk356x (Michael Tretter)
- arm64: dts: rockchip: fix button reset pin for nanopi r5c (Tianling Shen)
- arm64: dts: rockchip: Add rk3588 OTP node (Cristian Ciocaltea)
- arm64: dts: rockchip: Update leds for Anbernic RGxx3 Series (Chris Morgan)
- arm64: dts: rockchip: add Anbernic RG353PS (Chris Morgan)
- arm64: dts: rockchip: Add Lunzn Fastrhino R68S (Tianling Shen)
- arm64: dts: rockchip: Add Lunzn Fastrhino R66S (Tianling Shen)
- arm64: dts: rockchip: Add rk3588 timer (Cristian Ciocaltea)
- arm64: dts: rockchip: add GIC ITS support to rk3588 (Sebastian Reichel)
- arm64: dts: rockchip: fix nEXTRST on SOQuartz (Nicolas Frattaroli)
- arm64: dts: rockchip: add missing cache properties (Krzysztof Kozlowski)
- arm64: dts: rockchip: Update compatible for bluetooth (Chris Morgan)
- arm64: dts: rockchip: Add vdd_cpu_big regulators to rk3588-rock-5b (Cristian Ciocaltea)
- arm64: dts: rockchip: Use generic name for es8316 on Pinebook Pro and Rock 5B (Cristian Ciocaltea)
- arm64: dts: rockchip: Drop RTC clock-frequency on rk3588-rock-5b (Cristian Ciocaltea)
- arm64: dts: rockchip: Add pinctrl gpio-ranges for rk356x (John Clark)
- arm64: dts: rockchip: add panel to Anbernic RG353 series (Chris Morgan)
- arm64: dts: rockchip: Add rk3588-rock-5b analog audio (Cristian Ciocaltea)
- arm64: dts: rockchip: Add I2S rk3588 nodes (Cristian Ciocaltea)
- arm64: dts: rockchip: Add rk3588s I2S nodes (Cristian Ciocaltea)
- arm64: dts: rockchip: Assign PLL_PPLL clock rate to 1.1 GHz on rk3588s (Cristian Ciocaltea)
- arm64: dts: rockchip: Fix SCMI assigned clocks on rk3588s (Cristian Ciocaltea)
- arm64: dts: rockchip: add rk3588 thermal sensor (Sebastian Reichel)
- arm64: dts: rockchip: Add pwm-fan to rk3588-rock-5b (Cristian Ciocaltea)
- arm64: dts: rockchip: Enable RTC support for Rock 5B (Shreeya Patel)
- arm64: dts: rockchip: Add clk_rtc_32k to Anbernic xx3 Devices (Chris Morgan)
- arm64: dts: rockchip: Enable watchdog support for RK3588 (Shreeya Patel)
- arm64: dts: rockchip: remove hclk from dsi node on rk356x (Johan Jonker)
- arm64: dts: rockchip: rename vbus-supply to phy-supply in rk3566-box-demo.dts (Johan Jonker)
- arm64: dts: rockchip: remove I2S1 TDM node for the NanoPi R5 series (Tianling Shen)
- arm64: dts: rockchip: fix gmac support for NanoPi R5S (Tianling Shen)
- arm64: dts: rockchip: Add FriendlyARM NanoPi R5C (Tianling Shen)
- arm64: dts: rockchip: create common dtsi for NanoPi R5 series (Tianling Shen)
- arm64: dts: rockchip: add rk3588 cache level information (Sebastian Reichel)
- arm64: dts: rockchip: Add FriendlyElec Nanopi R5S (Vasily Khoruzhick)
- arm64: dts: rockchip: Add Khadas edge2 board (Yixun Lan)
- arm64: dts: rockchip: Enable USB OTG for rk3566 Radxa CM3 (Manoj Sai)
- arm64: dts: rockchip: Add sdmmc node to rk3588 (Lucas Tanure)
- arm64: dts: rockchip: Lower sd speed on rk3566-soquartz (Dan Johansen)
- arm64: dts: rockchip: set sdmmc0 speed to sd-uhs-sdr50 on rock-3a (Dan Johansen)
- arm64: dts: rockchip: Correct the model name for Radxa E25 (Jagan Teki)
- arm64: dts: rockchip: Drop unneeded model for Radxa CM3i (Jagan Teki)
- arm64: dts: rockchip: Add missing CM3i fallback compatible for Radxa E25 (Jagan Teki)
- arm64: dts: rockchip: Fix compatible for Radxa CM3 (Jagan Teki)
- arm64: dts: rockchip: rk3566: Enable WiFi, BT support for Radxa CM3 (Jagan Teki)
- arm64: dts: rockchip: Enable Ethernet for Radxa CM3 IO (Manoj Sai)
- arm64: dts: rockchip: add display to RG503 (Chris Morgan)
- arm64: dts: rockchip: add pinctrls for 16-bit/18-bit rgb interface to rk356x (Michael Riesch)
- arm64: dts: rockchip: fix probe of analog sound card on rock-3a (Jonas Karlman)
- arm64: dts: rockchip: Update eMMC, SD aliases for Radxa SBC boards (Jagan Teki)
- arm64: dts: rockchip: Update eMMC, SD aliases for Radxa SoM boards (Jagan Teki)
- arm64: dts: rockchip: Add Radxa Compute Module 3 IO board (Jagan Teki)
- arm64: dts: rockchip: Add rk3566 based Radxa Compute Module 3 (Jagan Teki)
- arm64: dts: rockchip: Fix RX delay for ethernet phy on rk3588s-rock5a (Lucas Tanure)
- arm64: dts: rockchip: add missing #interrupt-cells to rk356x pcie2x1 (Jensen Huang)
- arm64: dts: rockchip: add Hynitron cst340 for Anbernic 353 series (Chris Morgan)
- arm64: dts: rockchip: Enable wifi module AP6398s for rk3566 box demo (Andy Yan)
- arm64: dts: rockchip: add io domain setting to rk3566-box-demo (Andy Yan)
- arm64: dts: rockchip: rk3588: Add Edgeble Neu6 Model A IO (Jagan Teki)
- arm64: dts: rockchip: rk3588: Add Edgeble Neu6 Model A SoM (Jagan Teki)
- arm64: dts: rockchip: fix hdmi cec on rock-3a (Jonas Karlman)
- arm64: dts: rockchip: assign rate to clk_rtc_32k on rk356x (Jonas Karlman)
- arm64: dts: rockchip: Update sdhci alias for rock-5b (Christopher Obbard)
- arm64: dts: rockchip: Remove empty line from rock-5a (Christopher Obbard)
- arm64: dts: rockchip: Update sdhci alias for rock-5a (Christopher Obbard)
- arm64: dts: rockchip: Add rock-5b board (Christopher Obbard)
- arm64: dts: rockchip: Add rock-5a board (Sebastian Reichel)
- arm64: dts: rockchip: Add rk3588-evb1 board (Kever Yang)
- arm64: dts: rockchip: Add base DT for rk3588 SoC (Kever Yang)
- arm64: dts: rockchip: Add rk3588 pinctrl data (Jianqun Xu)
- arm64: dts: rockchip: Add IR receiver to BPI-R2Pro (Alex Riabchenko)
- arm64: dts: rockchip: Add dts for EmbedFire rk3568 LubanCat 2 (Andy Yan)
- arm64: dts: rockchip: add audio nodes to rk3566-roc-pc (Furkan Kardame)
- arm64: dts: rockchip: remove unsupported property from sdmmc2 for rock-3a (Chukun Pan)
- arm64: dts: rockchip: Add EmbedFire LubanCat 1 (Wenhao Cui)
- arm64: dts: rockchip: Add Radxa CM3I E25 (Chukun Pan)
- arm64: dts: rockchip: Add SOQuartz Model A baseboard (Andrew Powers-Holmes)
- arm64: dts: rockchip: Add SOQuartz blade board (Andrew Powers-Holmes)
- arm64: dts: rockchip: Add support of regulator for ethernet node on Rock 3A SBC (Anand Moon)
- arm64: dts: rockchip: Add support of external clock to ethernet node on Rock 3A SBC (Anand Moon)
- arm64: dts: rockchip: Add dts for rockchip rk3566 box demo board (Andy Yan)
- arm64: dts: rockchip: Enable PCIe 2 on SOQuartz CM4IO (Nicolas Frattaroli)
- arm64: dts: rockchip: Enable HDMI sound on SOQuartz (Nicolas Frattaroli)
- arm64: dts: rockchip: Enable video output and HDMI on SOQuartz (Nicolas Frattaroli)
- arm64: dts: rockchip: Enable GPU on SOQuartz CM4 (Nicolas Frattaroli)
- arm64: dts: rockchip: Fix Pine64 Quartz4-B PMIC interrupt (Chen-Yu Tsai)
- arm64: dts: rockchip: fix adc-keys sub node names (Johan Jonker)
- arm64: dts: rockchip: remove clock-frequency from rtc (Sebastian Reichel)
- arm64: dts: rockchip: enable pcie2 on rk3566-roc-pc (Furkan Kardame)
- arm64: dts: rockchip: add poll-interval to RGxx3 devices (Chris Morgan)
- arm64: dts: rockchip: add rk817 chg to RG353P and RG503 (Chris Morgan)
- arm64: dts: rockchip: add Anbernic RG353V and RG353VS (Chris Morgan)
- arm64: dts: rockchip: Add nodes for SDIO/UART Wi-Fi/Bluetooth modules to Radxa Rock 3A (Shengyu Qu)
- arm64: dts: rockchip: Add I2S2 node for RADXA Rock 3A (Shengyu Qu)
- arm64: dts: rockchip: RK356x: Add I2S2 device node (Shengyu Qu)
- arm64: dts: rockchip: fix spdif@fe460000 ordering on rk356x (Heiko Stuebner)
- arm64: dts: rockchip: fix quartz64-a bluetooth configuration (Lev Popov)
- arm64: dts: rockchip: Add PCIe v3 nodes to rock-3a (Chukun Pan)
- arm64: dts: rockchip: Add regulator suffix to rock-3a (Chukun Pan)
- arm64: dts: rockchip: remove i2c5 from rk3566-roc-pc (Furkan Kardame)
- arm64: dts: rockchip: Fix i2c3 pinctrl on rk3566-roc-pc (Furkan Kardame)
- arm64: dts: rockchip: Fix gmac failure of rgmii-id from rk3566-roc-pc (Furkan Kardame)
- arm64: dts: rockchip: Add IR receiver node to ODROID-M1 (Aurelien Jarno)
- arm64: dts: rockchip: Add PCIEe v3 nodes to ODROID-M1 (Aurelien Jarno)
- arm64: dts: rockchip: Add SATA support to ODROID-M1 (Aurelien Jarno)
- arm64: dts: rockchip: Enable the USB 3.0 ports on ODROID-M1 (Aurelien Jarno)
- arm64: dts: rockchip: Enable the USB 2.0 ports on ODROID-M1 (Aurelien Jarno)
- arm64: dts: rockchip: Enable the GPU on ODROID-M1 (Aurelien Jarno)
- arm64: dts: rockchip: Enable HDMI audio on ODROID-M1. (Aurelien Jarno)
- arm64: dts: rockchip: Enable vop2 and hdmi tx on ODROID-M1 (Aurelien Jarno)
- arm64: dts: rockchip: Add analog audio on ODROID-M1 (Aurelien Jarno)
- arm64: dts: rockchip: Add NOR flash to ODROID-M1 (Aurelien Jarno)
- arm64: dts: rockchip: add thermal support to ODROID-M1 (Aurelien Jarno)
- arm64: dts: rockchip: Add Hardkernel ODROID-M1 board (Dongjin Kim)
- arm64: dts: rockchip: Add DSI and DSI-DPHY nodes to rk356x (Chris Morgan)
- arm64: dts: rockchip: Enable HDMI and GPU on quartz64-b (Nicolas Frattaroli)
- arm64: dts: rockchip: Enable video output on rk3566-roc-pc (Furkan Kardame)
- arm64: dts: rockchip: Add Hantro encoder node to rk356x (Nicolas Frattaroli)
- arm64: dts: rockchip: Add VPU support for RK3568/RK3566 (Piotr Oniszczuk)
- arm64: dts: rockchip: Enable PCIe controller on rock3a (Chukun Pan)
- arm64: dts: rockchip: add rtc to rock3a (Chukun Pan)
- arm64: dts: rockchip: Add PCIe 2 nodes to quartz64-b (Nicolas Frattaroli)
- arm64: dts: rockchip: add Anbernic RG353P and RG503 (Chris Morgan)
- arm64: dts: rockchip: Add regulator suffix to BPI-R2-Pro (Frank Wunderlich)
- arm64: dts: rockchip: Remove 'enable-active-low' from rk3566-quartz64-a (Fabio Estevam)
- arm64: dts: rockchip: fix property for usb2 phy supply on rk3568-evb1-v10 (Michael Riesch)
- arm64: dts: rockchip: fix property for usb2 phy supply on rock-3a (Michael Riesch)
- arm64: dts: rockchip: add csi dphy node to rk356x (Michael Riesch)
- arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro (Frank Wunderlich)
- arm64: dts: rockchip: Add PCIe v3 nodes to rk3568 (Frank Wunderlich)
- arm64: dts: rockchip: specify pinctrl for i2c adapters on rock-3a (Michael Riesch)
- arm64: dts: rockchip: add vcc_mipi regulator to rock-3a (Michael Riesch)
- arm64: dts: rockchip: add vcc_cam regulator to rock-3a (Michael Riesch)
- arm64: dts: rockchip: Add analog audio output on quartz64-b (Nicolas Frattaroli)
- arm64: dts: rockchip: fix upper usb port on BPI-R2-Pro (Frank Wunderlich)
- arm64: dts: rockchip: Lower sd speed on quartz64-b (Nicolas Frattaroli)
- arm64: dts: rockchip: enable hdmi tx audio on rock-3a (Michael Riesch)
- arm64: dts: rockchip: enable hdmi tx audio on rk3568-evb1-v10 (Michael Riesch)
- arm64: dts: rockchip: align gpio-key node names with dtschema (Krzysztof Kozlowski)
- arm64: dts: rockchip: Add mt7531 dsa node to BPI-R2-Pro board (Frank Wunderlich)
- arm64: dts: rockchip: enable the gpu on BPI-R2-Pro (Frank Wunderlich)
- arm64: dts: rockchip: configure thermal shutdown for BPI-R2-Pro (Frank Wunderlich)
- arm64: dts: rockchip: Enable HDMI audio on BPI R2 Pro (Frank Wunderlich)
- arm64: dts: rockchip: enable vop2 and hdmi tx on BPI-R2-Pro (Frank Wunderlich)
- arm64: dts: rockchip: set display regulators to always-on on BPI-R2-Pro (Frank Wunderlich)
- arm64: dts: rockchip: add RTC to BPI-R2 Pro (Frank Wunderlich)
- arm64: dts: rockchip: Fix Quartz64-A dwc3 otg port behavior (Peter Geis)
- arm64: dts: rockchip: Enable HDMI audio on Quartz64 A (Nicolas Frattaroli)
- arm64: dts: rockchip: Add HDMI audio nodes to rk356x (Nicolas Frattaroli)
- arm64: dts: rockchip: Fix ethernet on production Quartz64-B (Peter Geis)
- arm64: dts: rockchip: enable vop2 and hdmi tx on rock-3a (Michael Riesch)
- arm64: dts: rockchip: enable vop2 and hdmi tx on quartz64a (Michael Riesch)
- arm64: dts: rockchip: rk3568-evb: Enable VOP2 and hdmi (Sascha Hauer)
- arm64: dts: rockchip: rk356x: Add HDMI nodes (Sascha Hauer)
- arm64: dts: rockchip: rk356x: Add VOP2 nodes (Sascha Hauer)
- arm64: dts: rockchip: Enable PCIe controller on quartz64-a (Peter Geis)
- arm64: dts: rockchip: Add rk3568 PCIe2x1 controller (Peter Geis)
- arm64: dts: rockchip: enable sfc controller on Quartz64 Model A (Peter Geis)
- arm64: dts: rockchip: enable sdr-104 for sdmmc on Quartz A (Peter Geis)
- arm64: dts: rockchip: add Quartz64-A fan pinctrl (Peter Geis)
- arm64: dts: rockchip: rename Quartz64-A bluetooth gpios (Peter Geis)
- arm64: dts: rockchip: add clocks to rk356x cru (Peter Geis)
- arm64: dts: rockchip: enable otg/drd operation of usb_host0_xhci in rk356x (Michael Riesch)
- arm64: dts: rockchip: add dts for Firefly Station M2 rk3566 (Furkan Kardame)
- arm64: dts: rockchip: add SoQuartz CM4IO dts (Peter Geis)
- arm64: dts: rockchip: add Pine64 Quartz64-B device tree (Peter Geis)
- arm64: dts: rockchip: enable usb hub on the radxa rock3 model a (Michael Riesch)
- arm64: dts: rockchip: add usb3 support to the radxa rock3 model a (Michael Riesch)
- arm64: dts: rockchip: add rk356x sfc support (Peter Geis)
- arm64: dts: rockchip: Add USB and TCPC to rk3566-pinenote (Samuel Holland)
- arm64: dts: rockchip: Add accelerometer to rk3566-pinenote (Samuel Holland)
- arm64: dts: rockchip: Add SATA support to BPI-R2-Pro (Frank Wunderlich)
- arm64: dts: rockchip: Add USB nodes for BPI-R2-Pro (Frank Wunderlich)
- arm64: dts: rockchip: add usb3 support to rk3568-evb1-v10 (Michael Riesch)
- arm64: dts: rockchip: enable dwc3 on quartz64-a (Peter Geis)
- arm64: dts: rockchip: add rk356x dwc3 usb3 nodes (Peter Geis)
- arm64: dts: rockchip: add basic dts for the radxa rock3 model a (Michael Riesch)
- arm64: dts: rockchip: Add gmac1 and change network settings of bpi-r2-pro (Frank Wunderlich)
- arm64: dts: rockchip: Change io-domains of bpi-r2-pro (Frank Wunderlich)
- arm64: dts: rockchip: Add sata nodes to rk356x (Frank Wunderlich)
- arm64: dts: rockchip: add naneng combo phy nodes for rk3568 (Yifeng Zhao)
- arm64: dts: rockchip: enable rk809 audio codec on the rk3568 evb1-v10 (Michael Riesch)
- arm64: dts: rockchip: set vdd_gpu regulator on rk3568-evb1-v10 to always on (Michael Riesch)
- arm64: dts: rockchip: add the vdd_cpu regulator to rk3568-evb1-v10 (Michael Riesch)
- arm64: dts: rockchip: enable work led on rk3568-evb1-v10 (Michael Riesch)
- arm64: dts: rockchip: Add Pine64 PineNote board (Samuel Holland)
- arm64: dts: rockchip: Add pdm node to rk356x (Samuel Holland)
- arm64: dts: rockchip: enable the tsadc on rk3568-evb1-v10 (Michael Riesch)
- arm64: dts: rockchip: enable the gpu on rk3568-evb1-v10 (Michael Riesch)
- arm64: dts: rockchip: enable the gpu on quartz64-a (Ezequiel Garcia)
- arm64: dts: rockchip: add cooling map and trip points for gpu to rk356x (Alex Bee)
- arm64: dts: rockchip: add gpu node to rk356x (Ezequiel Garcia)
- arm64: dts: rockchip: add usb2 support to rk3568-evb1-v10 (Michael Riesch)
- arm64: dts: rockchip: rename and sort the rk356x usb2 phy handles (Michael Riesch)
- arm64: dts: rockchip: add the i2s3_2ch node to rk356x (Michael Riesch)
- arm64: dts: rockchip: Add Bananapi R2 Pro (Frank Wunderlich)
- arm64: dts: rockchip: fix Quartz64-A ddr regulator voltage (Peter Geis)
- arm64: dts: rockchip: add Quartz64-A con40 hardware (Peter Geis)
- arm64: dts: rockchip: add Quartz64-A sdmmc1 node (Peter Geis)
- arm64: dts: rockchip: add Quartz64-A pmu_io_domains (Peter Geis)
- arm64: dts: rockchip: add the touchscreen controller to rk3568-evb1-v10 (Michael Riesch)
- arm64: dts: rockchip: fix vcc3v3_lcd{0,1}_n regulators in rk3568-evb1-10 (Michael Riesch)
- arm64: dts: rockchip: drop pclk_xpcs from gmac0 on rk3568 (Frank Wunderlich)
- arm64: dts: rockchip: fix dma-controller node names on rk356x (Frank Wunderlich)
- arm64: dts: rockchip: add Quartz64-A usb2 support (Peter Geis)
- arm64: dts: rockchip: add usb2 nodes to rk3568 device tree (Peter Geis)
- arm64: dts: rockchip: Add spi1 pins on Quartz64 A (Nicolas Frattaroli)
- arm64: dts: rockchip: Add spi nodes on rk356x (Nicolas Frattaroli)
- arm64: dts: rockchip: Change pwm pinctrl-name to "default" on rk356x (Sascha Hauer)
- arm64: dts: rockchip: fix resets in tsadc node for rk356x (Johan Jonker)
- arm64: dts: rockchip: Add analog audio on Quartz64 (Nicolas Frattaroli)
- arm64: dts: rockchip: Add i2s1 on rk356x (Nicolas Frattaroli)
- arm64: dts: rockchip: enable spdif on Quartz64 A (Nicolas Frattaroli)
- arm64: dts: rockchip: add spdif node to rk356x (Peter Geis)
- arm64: dts: rockchip: add pwm nodes for rk3568 (Liang Chen)
- arm64: dts: rockchip: align operating-points table name with dtschema (Krzysztof Kozlowski)
- arm64: dts: rockchip: add saradc to rk3568-evb1-v10 (Michael Riesch)
- arm64: dts: rockchip: add missing rockchip,grf property to rk356x (Michael Riesch)
- arm64: dts: rockchip: add thermal support to Quartz64 Model A (Peter Geis)
- arm64: dts: rockchip: add rk3568 tsadc nodes (Peter Geis)
- arm64: dts: rockchip: add rk356x gpio debounce clocks (Peter Geis)
- arm64: dts: rockchip: add pinctrl and alias to emmc node to rk3568-evb1-v10 (Michael Riesch)
- arm64: dts: rockchip: add node for sd card to rk3568-evb1-v10 (Michael Riesch)
- arm64: dts: rockchip: add regulators of rk809 pmic to rk3568-evb1-v10 (Michael Riesch)
- arm64: dts: rockchip: enable io domains on rk3568-evb1-v10 (Michael Riesch)
- arm64: dts: rockchip: add core io domains node for rk356x (Michael Riesch)
- arm64: dts: rockchip: rk3568-evb1-v10: add ethernet support (Michael Riesch)
- arm64: dts: rockchip: add gmac0 node to rk3568 (Michael Riesch)
- arm64: dts: rockchip: enable gmac node on quartz64-a (Peter Geis)
- arm64: dts: rockchip: adjust rk3568 pll clocks (Peter Geis)
- arm64: dts: rockchip: add rk356x gmac1 node (Peter Geis)
- arm64: dts: rockchip: fix rk3568 mbi-alias (Peter Geis)
- arm64: dts: rockchip: add watchdog to rk3568 (Liang Chen)
- arm64: dts: rockchip: add basic dts for Pine64 Quartz64-A (Peter Geis)
- arm64: dts: rockchip: add rk3566 dtsi (Peter Geis)
- arm64: dts: rockchip: split rk3568 device tree (Peter Geis)
- arm64: dts: rockchip: move rk3568 dtsi to rk356x dtsi (Peter Geis)
- arm64: dts: rockchip: add saradc node for rk3568 (Simon Xue)
- arm64: dts: rockchip: add pmu and qos nodes for rk3568 (Liang Chen)

* Thu Sep 12 2024 Rado Vrbovsky <rvrbovsk@redhat.com> [5.14.0-508.el9]
- usb: xhci: prevent potential failure in handle_tx_event() for Transfer events without TRB (Desnes Nunes) [RHEL-52378] {CVE-2024-42226}
- redhat: set defaults for RHEL 9.5 (Lucas Zampieri)
- redhat/configs: Make CONFIG_REGULATOR_GPIO built-in (Luiz Capitulino) [RHEL-21095]
- redhat/configs: enable a bunch of regulators (Luiz Capitulino) [RHEL-21095]
- md-cluster: fix no recovery job when adding/re-adding a disk (Nigel Croxon) [RHEL-46615]
- md-cluster: fix hanging issue while a new disk adding (Nigel Croxon) [RHEL-46615]
- md/raid5: recheck if reshape has finished with device_lock held (Nigel Croxon) [RHEL-46615]
- md: Don't wait for MD_RECOVERY_NEEDED for HOT_REMOVE_DISK ioctl (Nigel Croxon) [RHEL-46615]
- md-cluster: Constify struct md_cluster_operations (Nigel Croxon) [RHEL-46615]
- md/raid5: fix spares errors about rcu usage (Nigel Croxon) [RHEL-46615]
- md: pass in max_sectors for pers->sync_request() (Nigel Croxon) [RHEL-46615]
- md: factor out helpers for different sync_action in md_do_sync() (Nigel Croxon) [RHEL-46615]
- md: replace last_sync_action with new enum type (Nigel Croxon) [RHEL-46615]
- md: use new helpers in md_do_sync() (Nigel Croxon) [RHEL-46615]
- md: don't fail action_store() if sync_thread is not registered (Nigel Croxon) [RHEL-46615]
- md: remove parameter check_seq for stop_sync_thread() (Nigel Croxon) [RHEL-46615]
- md: replace sysfs api sync_action with new helpers (Nigel Croxon) [RHEL-46615]
- md: factor out helper to start reshape from action_store() (Nigel Croxon) [RHEL-46615]
- md: add new helpers for sync_action (Nigel Croxon) [RHEL-46615]
- md: add a new enum type sync_action (Nigel Croxon) [RHEL-46615]
- md: rearrange recovery_flags (Nigel Croxon) [RHEL-46615]
- md/md-bitmap: fix writing non bitmap pages (Nigel Croxon) [RHEL-46615]
- md: make md_flush_request() more readable (Nigel Croxon) [RHEL-46615]
- md: change the return value type of md_write_start to void (Nigel Croxon) [RHEL-46615]
- md: do not delete safemode_timer in mddev_suspend (Nigel Croxon) [RHEL-46615]
- lib: objagg: Fix general protection fault (Waiman Long) [RHEL-54790 RHEL-54793] {CVE-2024-43846}
- Revert "x86/topology: Switch over to GENERIC_CPU_DEVICES" (David Arcari) [RHEL-58031]
- Revert "x86/topology: use weak version of arch_unregister_cpu()" (David Arcari) [RHEL-58031]
- Revert "x86/topology: convert to use arch_cpu_is_hotpluggable()" (David Arcari) [RHEL-58031]
- Revert "x86/cpu: Move leftover contents of topology.c to setup.c" (David Arcari) [RHEL-58031]
- x86/resctrl: Remove redundant variable in mbm_config_write_domain() (David Arcari) [RHEL-57701]
- x86/resctrl: Read supported bandwidth sources from CPUID (David Arcari) [RHEL-57701]
- x86/resctrl: Remove hard-coded memory bandwidth limit (David Arcari) [RHEL-57701]

* Wed Sep 11 2024 Rado Vrbovsky <rvrbovsk@redhat.com> [5.14.0-507.el9]
- block: fix deadlock between sd_remove & sd_release (CKI Backport Bot) [RHEL-54997] {CVE-2024-42294}
- gpio: prevent potential speculation leaks in gpio_device_get_desc() (CKI Backport Bot) [RHEL-56213] {CVE-2024-44931}
- redhat: hmac sign the UKI for FIPS (Vitaly Kuznetsov)
- Also make vmlinuz-virt.efi world readable (Vitaly Kuznetsov)
- ice: fix truesize operations for PAGE_SIZE >= 8192 (Petr Oros) [RHEL-37905]
- ice: fix ICE_LAST_OFFSET formula (Petr Oros) [RHEL-37905]
- ice: fix page reuse when PAGE_SIZE is over 8k (Petr Oros) [RHEL-37905]
- usb: cdns3: Fix spelling mistake "supporte" -> "supported" (Martin McConnell) [RHEL-54566]
- usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable() (Martin McConnell) [RHEL-54566]
- usb: cdns3: fix memory double free when handle zero packet (Martin McConnell) [RHEL-54566]
- usb: cdnsp: fixed issue with incorrect detecting CDNSP family controllers (Martin McConnell) [RHEL-54566]
- usb: cdnsp: blocked some cdns3 specific code (Martin McConnell) [RHEL-54566]
- usb: cdns3: Fix uvc fail when DMA cross 4k boundery since sg enabled (Martin McConnell) [RHEL-54566]
- usb: cdns3: fix iso transfer error when mult is not zero (Martin McConnell) [RHEL-54566]
- usb: cdns3: fix uvc failure work since sg support enabled (Martin McConnell) [RHEL-54566]
- usb: cdns3: Use dev_err_probe (Martin McConnell) [RHEL-54566]
- usb: cdns3: starfive: don't misuse /** comment (Martin McConnell) [RHEL-54566]
- usb: cdnsp: Replace snprintf() with the safer scnprintf() variant (Martin McConnell) [RHEL-54566]
- usb: cdns3: skip set TRB_IOC when usb_request: no_interrupt is true (Martin McConnell) [RHEL-54566]
- usb: cdnsp: Fix deadlock issue during using NCM gadget (Martin McConnell) [RHEL-54566]
- usb:cdnsp: remove TRB_FLUSH_ENDPOINT command (Martin McConnell) [RHEL-54566]
- usb: cdns3: Modify the return value of cdns_set_active () to void when CONFIG_PM_SLEEP is disabled (Martin McConnell) [RHEL-54566]
- usb: cdnsp: Fixes issue with dequeuing not queued requests (Martin McConnell) [RHEL-54566]
- usb: cdns3: Add PHY mode switch to usb2 PHY (Martin McConnell) [RHEL-54566]
- usb: cdns3: starfive: Convert to platform remove callback returning void (Martin McConnell) [RHEL-54566]
- usb: cdns3: Put the cdns set active part outside the spin lock (Martin McConnell) [RHEL-54566]
- usb: cdns3: fix incorrect calculation of ep_buf_size when more than one config (Martin McConnell) [RHEL-54566]
- usb: cdns3: imx: Rework system PM to avoid duplicated operations (Martin McConnell) [RHEL-54566]
- usb: cdns3: optimize OUT transfer by copying only actual received data (Martin McConnell) [RHEL-54566]
- usb: cdns3: improve handling of unaligned address case (Martin McConnell) [RHEL-54566]
- usb: cdns3: Add StarFive JH7110 USB driver (Martin McConnell) [RHEL-54566]
- usb: cdns3: imx: simplify clock name usage (Martin McConnell) [RHEL-54566]
- usb: cdns3: fix NCM gadget RX speed 20x slow than expection at iMX8QM (Martin McConnell) [RHEL-54566]
- usb: cdns3-ti: Convert to platform remove callback returning void (Martin McConnell) [RHEL-54566]
- usb: cdns3-plat: Convert to platform remove callback returning void (Martin McConnell) [RHEL-54566]
- usb: cdns3-imx: Convert to platform remove callback returning void (Martin McConnell) [RHEL-54566]
- usb: cdnsp: Fixes error: uninitialized symbol 'len' (Martin McConnell) [RHEL-54566]
- usb: cdnsp: changes PCI Device ID to fix conflict with CNDS3 driver (Martin McConnell) [RHEL-54566]
- usb: cdns3: Fix issue with using incorrect PCI device function (Martin McConnell) [RHEL-54566]
- usb: cdnsp: Fixes issue with redundant Status Stage (Martin McConnell) [RHEL-54566]
- usb: cdns3: change some trace event __dynamic_array() to __get_buf() (Martin McConnell) [RHEL-54566]
- usb: cdns3: change trace event cdns3_ring() operation (Martin McConnell) [RHEL-54566]
- usb: cdnsp: : add scatter gather support for ISOC endpoint (Martin McConnell) [RHEL-54566]
- usb: cdns3: remove fetched trb from cache before dequeuing (Martin McConnell) [RHEL-54566]
- usb: cdnsp: fix lack of ZLP for ep0 (Martin McConnell) [RHEL-54566]
- usb: cdnsp: fix issue with ZLP - added TD_SIZE = 1 (Martin McConnell) [RHEL-54566]
- usb: cdnsp: Fix issue with Clear Feature Halt Endpoint (Martin McConnell) [RHEL-54566]
- usb: cdns3: host: fix endless superspeed hub port reset (Martin McConnell) [RHEL-54566]
- usb: cdns3: adjust the partial logic of cdnsp_pci_remove (Martin McConnell) [RHEL-54566]
- usb: cdns3: remove dead code (Martin McConnell) [RHEL-54566]
- Bluetooth: MGMT: Add error handling to pair_device() (CKI Backport Bot) [RHEL-56148] {CVE-2024-43884}
- PCI/DPC: Fix use-after-free on concurrent DPC and hot-removal (Myron Stowe) [RHEL-54981] {CVE-2024-42302}
- ASoC: TAS2781: Fix tasdev_load_calibrated_data() (CKI Backport Bot) [RHEL-55177] {CVE-2024-42278}
- cgroup/cpuset: Prevent UAF in proc_cpuset_show() (Waiman Long) [RHEL-54775 RHEL-54779] {CVE-2024-43853}
- net: add and use __skb_get_hash_symmetric_net (Hangbin Liu) [RHEL-54921]
- net: add and use skb_get_hash_net (Hangbin Liu) [RHEL-54921]
- net: flow_dissector: use DEBUG_NET_WARN_ON_ONCE (CKI Backport Bot) [RHEL-54921] {CVE-2024-42321}
- ice: Adjust PTP init for 2x50G E825C devices (Petr Oros) [RHEL-29210]
- ice: Add NAC Topology device capability parser (Petr Oros) [RHEL-29210]
- ice: Add support for E825-C TS PLL handling (Petr Oros) [RHEL-29210]
- ice: Change CGU regs struct to anonymous (Petr Oros) [RHEL-29210]
- ice: Introduce ETH56G PHY model for E825C products (Petr Oros) [RHEL-29210]
- ice: Introduce ice_get_base_incval() helper (Petr Oros) [RHEL-29210]
- ice: Move CGU block (Petr Oros) [RHEL-29210]
- ice: Add PHY OFFSET_READY register clearing (Petr Oros) [RHEL-29210]
- ice: Implement Tx interrupt enablement functions (Petr Oros) [RHEL-29210]
- ice: Introduce helper to get tmr_cmd_reg values (Petr Oros) [RHEL-29210]
- ice: Introduce ice_ptp_hw struct (Petr Oros) [RHEL-29210]
- Bluetooth: Fix use-after-free bugs caused by sco_sock_timeout (CKI Backport Bot) [RHEL-17953 RHEL-36378] {CVE-2024-27398}
- Bluetooth: btintel: Fixe build regression (Bastien Nocera) [RHEL-37353] {CVE-2024-35933}
- Bluetooth: btintel: Fix null ptr deref in btintel_read_version (CKI Backport Bot) [RHEL-37353] {CVE-2024-35933}
- Bluetooth: fix connection setup in l2cap_connect (Bastien Nocera) [RHEL-38459] {CVE-2024-36013}
- Bluetooth: HCI: Remove HCI_AMP support (Bastien Nocera) [RHEL-38459] {CVE-2024-36013}
- Bluetooth: Remove HCI_POWER_OFF_TIMEOUT (Bastien Nocera) [RHEL-38459] {CVE-2024-36013}
- Bluetooth: hci_event: Remove code to removed CONFIG_BT_HS (Bastien Nocera) [RHEL-38459] {CVE-2024-36013}
- Bluetooth: Remove usage of the deprecated ida_simple_xx() API (Bastien Nocera) [RHEL-38459] {CVE-2024-36013}
- Bluetooth: L2CAP: Fix slab-use-after-free in l2cap_connect() (Bastien Nocera) [RHEL-38459] {CVE-2024-36013}
- Bluetooth: Remove BT_HS (Bastien Nocera) [RHEL-38459] {CVE-2024-36013}
- Bluetooth: qca: add missing firmware sanity checks (CKI Backport Bot) [RHEL-39643] {CVE-2024-36880}
- Bluetooth: hci_sock: Fix not validating setsockopt user input (Bastien Nocera) [RHEL-37411] {CVE-2024-35963}
- Bluetooth: SCO: Fix not validating setsockopt user input (Bastien Nocera) [RHEL-37396] {CVE-2024-35967}
- Bluetooth: L2CAP: Fix not validating setsockopt user input (Bastien Nocera) [RHEL-37404] {CVE-2024-35965}
- Bluetooth: ISO: Fix not validating setsockopt user input (Bastien Nocera) [RHEL-37406] {CVE-2024-35964}
- Bluetooth: RFCOMM: Fix not validating setsockopt user input (Bastien Nocera) [RHEL-37400] {CVE-2024-35966}
- Bluetooth: Fix memory leak in hci_req_sync_complete() (CKI Backport Bot) [RHEL-37378] {CVE-2024-35978}
- Bluetooth: msft: fix slab-use-after-free in msft_do_close() (CKI Backport Bot) [RHEL-38463] {CVE-2024-36012}
- rtc: tps6594: Fix memleak in probe (Joel Slebodnick) [RHEL-45915]
- redhat/configs: add config file for tps6594 pfsm (Joel Slebodnick) [RHEL-45915]
- redhat/configs: add config file for tps6594 esm (Joel Slebodnick) [RHEL-45915]
- redhat/configs: add config file for tps6594 rtc drv (Joel Slebodnick) [RHEL-45915]
- redhat/configs: add config file for tps6594 regulator (Joel Slebodnick) [RHEL-45915]
- redhat/configs: add config file for tps6594 pinctrl (Joel Slebodnick) [RHEL-45915]
- redhat/configs: add config file for tps6594 spi (Joel Slebodnick) [RHEL-45915]
- redhat/configs: add config file for tps6594 i2c (Joel Slebodnick) [RHEL-45915]
- regulator: tps6594-regulator: Correct multi-phase configuration (Joel Slebodnick) [RHEL-45915]
- rtc: tps6594: Add driver for TPS6594 RTC (Joel Slebodnick) [RHEL-45915]
- pinctrl: tps6594: Add driver for TPS6594 pinctrl and GPIOs (Joel Slebodnick) [RHEL-45915]
- regulator: tps6594-regulator: Fix random kernel crash (Joel Slebodnick) [RHEL-45915]
- misc: tps6594: Remove redundant dev_err_probe() for platform_get_irq_byname() (Joel Slebodnick) [RHEL-45915]
- misc: tps6594-esm: Disable ESM for rev 1 PMIC (Joel Slebodnick) [RHEL-45915]
- misc: tps6594-esm: Convert to platform remove callback returning void (Joel Slebodnick) [RHEL-45915]
- misc: tps6594-pfsm: Convert to platform remove callback returning void (Joel Slebodnick) [RHEL-45915]
- misc: tps6594-pfsm: Add driver for TI TPS6594 PFSM (Joel Slebodnick) [RHEL-45915]
- misc: tps6594-esm: Add driver for TI TPS6594 ESM (Joel Slebodnick) [RHEL-45915]
- regulator: tps6594-regulator: Add driver for TI TPS6594 regulators (Joel Slebodnick) [RHEL-45915]
- mfd: tps6594: Add null pointer check to tps6594_device_init() (Joel Slebodnick) [RHEL-45915]
- mfd: tps6594: Fix an error code in probe() (Joel Slebodnick) [RHEL-45915]
- mfd: tps6594: Add driver for TI TPS6594 PMIC (Joel Slebodnick) [RHEL-45915]
- mfd: tps80031: Remove driver (Joel Slebodnick) [RHEL-45915]
- dt-bindings: mfd: Add TI TPS6594 PMIC (Joel Slebodnick) [RHEL-45915]
- x86/mce: Implement recovery for errors in TDX/SEAM non-root mode (David Arcari) [RHEL-28497]

* Fri Sep 06 2024 Rado Vrbovsky <rvrbovsk@redhat.com> [5.14.0-506.el9]
- powercap: idle_inject: Simplify if condition (David Arcari) [RHEL-53594]
- powercap: intel_rapl: Switch to new Intel CPU model defines (David Arcari) [RHEL-53594]
- powercap: intel_rapl_msr: Switch to new Intel CPU model defines (David Arcari) [RHEL-53594]
- powercap: intel_rapl_tpmi: Enable PMU support (David Arcari) [RHEL-53594]
- powercap: intel_rapl: Introduce APIs for PMU support (David Arcari) [RHEL-53594]
- powercap: intel_rapl: Sort header files (David Arcari) [RHEL-53594]
- powercap: intel_rapl: Add support for ArrowLake-H platform (David Arcari) [RHEL-53594]
- Update 9.6 selt-tests (Lucas Zampieri)

* Wed Sep 04 2024 Rado Vrbovsky <rvrbovsk@redhat.com> [5.14.0-505.el9]
- PCI: Revert the cfg_access_lock lockdep mechanism (Myron Stowe) [RHEL-50255]
- PCI: Make pcie_bandwidth_capable() static (Myron Stowe) [RHEL-50255]
- x86/pci: Remove OLPC dead code (Myron Stowe) [RHEL-50255]
- PCI: Clean up accessor macro formatting (Myron Stowe) [RHEL-50255]
- PCI/ERR: Cleanup misleading indentation inside if conditions (Myron Stowe) [RHEL-50255]
- PCI: Annotate pci_cache_line_size variables as __ro_after_init (Myron Stowe) [RHEL-50255]
- PCI: Constify pcibus_class (Myron Stowe) [RHEL-50255]
- Revert "genirq/msi: Provide constants for PCI/IMS support" (Myron Stowe) [RHEL-50255]
- Revert "x86/apic/msi: Enable PCI/IMS" (Myron Stowe) [RHEL-50255]
- Revert "iommu/vt-d: Enable PCI/IMS" (Myron Stowe) [RHEL-50255]
- Revert "iommu/amd: Enable PCI/IMS" (Myron Stowe) [RHEL-50255]
- Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support" (Myron Stowe) [RHEL-50255]
- Revert "PCI/MSI: Provide pci_ims_alloc/free_irq()" (Myron Stowe) [RHEL-50255]
- PCI: endpoint: pci-epf-test: Clean up pci_epf_test_unbind() (Myron Stowe) [RHEL-50255]
- PCI: endpoint: pci-epf-test: Simplify pci_epf_test_set_bar() loop (Myron Stowe) [RHEL-50255]
- PCI: endpoint: pci-epf-test: Remove superfluous code (Myron Stowe) [RHEL-50255]
- PCI: endpoint: Allocate a 64-bit BAR if that is the only option (Myron Stowe) [RHEL-50255]
- PCI: endpoint: pci-epf-test: Simplify pci_epf_test_alloc_space() loop (Myron Stowe) [RHEL-50255]
- PCI: tegra194: Fix probe path for Endpoint mode (Myron Stowe) [RHEL-50255]
- PCI: rockchip-ep: Remove wrong mask on subsys_vendor_id (Myron Stowe) [RHEL-50255]
- PCI: rockchip-ep: Set a 64-bit BAR if requested (Myron Stowe) [RHEL-50255]
- PCI: mt7621: Fix string truncation in mt7621_pcie_parse_port() (Myron Stowe) [RHEL-50255]
- PCI: endpoint: Remove "core_init_notifier" flag (Myron Stowe) [RHEL-50255]
- PCI: dwc: ep: Call dw_pcie_ep_init_registers() API directly from all glue drivers (Myron Stowe) [RHEL-50255]
- PCI: dwc: ep: Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() (Myron Stowe) [RHEL-50255]
- PCI: dwc: ep: Introduce dw_pcie_ep_cleanup() API for drivers supporting PERST# (Myron Stowe) [RHEL-50255]
- PCI: dwc: ep: Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() (Myron Stowe) [RHEL-50255]
- PCI: dwc: ep: Remove deinit() callback from struct dw_pcie_ep_ops (Myron Stowe) [RHEL-50255]
- PCI: dwc: ep: Add Kernel-doc comments for APIs (Myron Stowe) [RHEL-50255]
- PCI: dwc: ep: Fix DBI access failure for drivers requiring refclk from host (Myron Stowe) [RHEL-50255]
- PCI: cadence: Set a 64-bit BAR if requested (Myron Stowe) [RHEL-50255]
- dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios (Myron Stowe) [RHEL-50255]
- dt-bindings: PCI: rcar-gen4-pci-ep: Add R-Car V4H compatible (Myron Stowe) [RHEL-50255]
- dt-bindings: PCI: rcar-gen4-pci-host: Add R-Car V4H compatible (Myron Stowe) [RHEL-50255]
- dt-bindings: PCI: layerscape-pci: Convert to YAML format (Myron Stowe) [RHEL-50255]
- dt-bindings: PCI: mediatek,mt7621: Add missing child node reg (Myron Stowe) [RHEL-50255]
- dt-bindings: PCI: cdns,cdns-pcie-host: Drop redundant msi-parent and pci-bus.yaml (Myron Stowe) [RHEL-50255]
- dt-bindings: PCI: ti,am65: Fix remaining binding warnings (Myron Stowe) [RHEL-50255]
- dt-bindings: PCI: ti,j721e-pci-host: Add support for J722S SoC (Myron Stowe) [RHEL-50255]
- dt-bindings: PCI: rcar-pci-host: Add missing IOMMU properties (Myron Stowe) [RHEL-50255]
- dt-bindings: PCI: ti,j721e-pci-host: Add device-id for TI's J784S4 SoC (Myron Stowe) [RHEL-50255]
- PCI/PM: Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports (Myron Stowe) [RHEL-50255]
- PCI: of_property: Return error for int_map allocation failure (Myron Stowe) [RHEL-50255]
- PCI/MSI: Make error path handling follow the standard pattern (Myron Stowe) [RHEL-50255]
- PCI: hotplug: Remove obsolete sgi_hotplug TODO notes (Myron Stowe) [RHEL-50255]
- PCI: hotplug: Document unchecked return value of pci_hp_add_bridge() (Myron Stowe) [RHEL-50255]
- PCI: Do not wait for disconnected devices when resuming (Myron Stowe) [RHEL-50255]
- x86/pci: Skip early E820 check for ECAM region (Myron Stowe) [RHEL-50255]
- PCI: Remove unused pci_enable_device_io() (Myron Stowe) [RHEL-50255]
- ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io() (Myron Stowe) [RHEL-50255]
- PCI: Update pci_find_capability() stub return types (Myron Stowe) [RHEL-50255]
- PCI: Remove PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- wifi: rtw88: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- wifi: ath10k: Refer to INTX instead of LEGACY (Myron Stowe) [RHEL-50255]
- r8169: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- net: alx: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- net: atlantic: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- net: amd-xgbe: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- VMCI: Use PCI_IRQ_ALL_TYPES to remove PCI_IRQ_LEGACY use (Myron Stowe) [RHEL-50255]
- RDMA/vmw_pvrdma: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- IB/qib: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- drm/amdgpu: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- mfd: intel-lpss: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- ntb: idt: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- platform/x86: intel_ips: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- tty: 8250_pci: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- usb: hcd-pci: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- ASoC: Intel: avs: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- Documentation: PCI: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- PCI/portdrv: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- PCI/MSI: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- PCI: Clarify intent of LT wait (Myron Stowe) [RHEL-50255]
- PCI: Wait for Link Training==0 before starting Link retrain (Myron Stowe) [RHEL-50255]
- PCI/EDR: Align EDR_PORT_LOCATE_DSM with PCI Firmware r3.3 (Myron Stowe) [RHEL-50255]
- PCI/EDR: Align EDR_PORT_DPC_ENABLE_DSM with PCI Firmware r3.3 (Myron Stowe) [RHEL-50255]
- PCI/DOE: Support discovery version 2 (Myron Stowe) [RHEL-50255]
- PCI: Lock upstream bridge for pci_reset_function() (Myron Stowe) [RHEL-50255]
- PCI/ASPM: Clean up ASPM disable/enable mask calculation (Myron Stowe) [RHEL-50255]
- PCI/ASPM: Consolidate link state defines (Myron Stowe) [RHEL-50255]
- PCI/AER: Update aer-inject tool source URL (Myron Stowe) [RHEL-50255]
- PCI: Mask Replay Timer Timeout errors for Genesys GL975x SD host controller (Myron Stowe) [RHEL-50255]
- of: unittest: Add tests for address translations (Myron Stowe) [RHEL-50255]
- of: address: Fix address translation when address-size is greater than 2 (Myron Stowe) [RHEL-50255]
- PCI: of: Destroy changeset when adding PCI device node fails (Myron Stowe) [RHEL-50255]
- PCI: of_property: Handle interrupt parsing failures (Myron Stowe) [RHEL-50255]
- PCI: Create device tree node for bridge (Myron Stowe) [RHEL-50255]
- dt-bindings: PCI: Drop unneeded quotes (Myron Stowe) [RHEL-50255]
- PCI/DOE: Relax restrictions on request and response size (Myron Stowe) [RHEL-50255]
- PCI/DOE: Make mailbox creation API private (Myron Stowe) [RHEL-50255]
- dt-bindings: PCI: ti,j721e-pci-host: Simplify 'device-id' schema (Myron Stowe) [RHEL-50255]
- dt-bindings: PCI: cdns-ep: Fix 'unevaluatedProperties' warnings (Myron Stowe) [RHEL-50255]
- dt-bindings: PCI: Fix 'unevaluatedProperties' warnings (Myron Stowe) [RHEL-50255]
- ptp: annotate data-race around q->head and q->tail (Hangbin Liu) [RHEL-38600]
- Input: gpio_keys_polled - suppress deferred probe error for gpio (Luiz Capitulino) [RHEL-52234]
- Input: gpio_keys_polled - simplify with dev_err_probe() (Luiz Capitulino) [RHEL-52234]
- redhat/configs: enable CONFIG_KEYBOARD_GPIO_POLLED driver (Luiz Capitulino) [RHEL-52234]
- net/smc: reduce rtnl pressure in smc_pnet_create_pnetids_list() (Mete Durlu) [RHEL-37349] {CVE-2024-35934}
- net/iucv: fix use after free in iucv_sock_close() (Mete Durlu) [RHEL-53992]
- tools/virtio: Add dma sync api for virtio test (Eric Auger) [RHEL-3230]
- virtio_ring: fix syncs DMA memory with different direction (Eric Auger) [RHEL-3230]
- virtio: packed: fix unmap leak for indirect desc table (Eric Auger) [RHEL-3230]
- virtio_net: fix missing dma unmap for resize (Eric Auger) [RHEL-3230]
- virtio_net: avoid data-races on dev->stats fields (Eric Auger) [RHEL-3230]
- virtio_net: fix the missing of the dma cpu sync (Eric Auger) [RHEL-3230]
- virtio_net: merge dma operations when filling mergeable buffers (Eric Auger) [RHEL-3230]
- virtio_ring: introduce dma sync api for virtqueue (Eric Auger) [RHEL-3230]
- virtio_ring: introduce dma map api for virtqueue (Eric Auger) [RHEL-3230]
- virtio_ring: introduce virtqueue_reset() (Eric Auger) [RHEL-3230]
- virtio_ring: separate the logic of reset/enable from virtqueue_resize (Eric Auger) [RHEL-3230]
- virtio_ring: correct the expression of the description of virtqueue_resize() (Eric Auger) [RHEL-3230]
- virtio_ring: skip unmap for premapped (Eric Auger) [RHEL-3230]
- virtio_ring: introduce virtqueue_dma_dev() (Eric Auger) [RHEL-3230]
- virtio_ring: support add premapped buf (Eric Auger) [RHEL-3230]
- virtio_ring: introduce virtqueue_set_dma_premapped() (Eric Auger) [RHEL-3230]
- virtio_ring: put mapping error check in vring_map_one_sg (Eric Auger) [RHEL-3230]
- virtio_ring: check use_dma_api before unmap desc for indirect (Eric Auger) [RHEL-3230]
- s390/dasd: fix error recovery leading to data corruption on ESE devices (Mete Durlu) [RHEL-55873]

* Mon Sep 02 2024 Rado Vrbovsky <rvrbovsk@redhat.com> [5.14.0-504.el9]
- Bump RHEL MINOR to 9.6 (Rado Vrbovsky)
- block: initialize integrity buffer to zero before writing it to media (Ming Lei) [RHEL-54768] {CVE-2024-43854}
- perf/x86/amd/uncore: Fix DF and UMC domain identification (David Arcari) [RHEL-43147]
- x86/mm/numa: Move early mptable evaluation into common code (David Arcari) [RHEL-43147]
- x86/cpu: Move leftover contents of topology.c to setup.c (David Arcari) [RHEL-43147]
- x86/topology: convert to use arch_cpu_is_hotpluggable() (David Arcari) [RHEL-43147]
- x86/topology: use weak version of arch_unregister_cpu() (David Arcari) [RHEL-43147]
- x86/topology: Switch over to GENERIC_CPU_DEVICES (David Arcari) [RHEL-43147]
- x86/topology: remove arch_*register_cpu() exports (David Arcari) [RHEL-43147]
- x86/topology/intel: Unlock CPUID before evaluating anything (David Arcari) [RHEL-43147]
- x86/topology/amd: Evaluate SMT in CPUID leaf 0x8000001e only on family 0x17 and greater (David Arcari) [RHEL-43147]
- x86/topology: Handle bogus ACPI tables correctly (David Arcari) [RHEL-43147]
- x86/topology/amd: Ensure that LLC ID is initialized (David Arcari) [RHEL-43147]
- x86/xen: return a sane initial apic id when running as PV guest (David Arcari) [RHEL-43147]
- x86/cpu/amd: Move TOPOEXT enablement into the topology parser (David Arcari) [RHEL-43147]
- x86/cpu/amd: Make the NODEID_MSR union actually work (David Arcari) [RHEL-43147]
- x86/cpu/amd: Make the CPUID 0x80000008 parser correct (David Arcari) [RHEL-43147]
- x86/topology: Don't update cpu_possible_map in topo_set_cpuids() (David Arcari) [RHEL-43147]
- x86/topology: Handle the !APIC case gracefully (David Arcari) [RHEL-43147]
- x86/topology: Don't evaluate logical IDs during early boot (David Arcari) [RHEL-43147]
- x86/cpu/topology: Add support for the AMD 0x80000026 leaf (David Arcari) [RHEL-43147]
- x86/topology: Ignore non-present APIC IDs in a present package (David Arcari) [RHEL-43147]
- x86/apic: Build the x86 topology enumeration functions on UP APIC builds too (David Arcari) [RHEL-43147]
- x86/cpu/topology: Get rid of cpuinfo::x86_max_cores (David Arcari) [RHEL-43147]
- docs: move x86 documentation into Documentation/arch/ [partial] (David Arcari) [RHEL-43147]
- x86/cpu: Remove x86_coreid_bits (David Arcari) [RHEL-43147]
- x86/mm/numa: Use core domain size on AMD (David Arcari) [RHEL-43147]
- x86/cpu/topology: Provide __num_[cores|threads]_per_package (David Arcari) [RHEL-43147]
- x86/cpu/topology: Rename smp_num_siblings (David Arcari) [RHEL-43147]
- arch/x86/kernel/setup.c: fixup rh_check_supported (David Arcari) [RHEL-43147]
- x86/cpu/topology: Retrieve cores per package from topology bitmaps (David Arcari) [RHEL-43147]
- x86/cpu/topology: Use topology logical mapping mechanism (David Arcari) [RHEL-43147]
- x86/smpboot: Change smp_store_boot_cpu_info() to static (David Arcari) [RHEL-43147]
- x86/cpu/topology: Provide logical pkg/die mapping (David Arcari) [RHEL-43147]
- x86/cpu/topology: Simplify cpu_mark_primary_thread() (David Arcari) [RHEL-43147]
- x86/cpu/topology: Mop up primary thread mask handling (David Arcari) [RHEL-43147]
- x86/cpu/topology: Use topology bitmaps for sizing (David Arcari) [RHEL-43147]
- x86/xen/smp_pv: Register the boot CPU APIC properly (David Arcari) [RHEL-43147]
- x86/cpu/topology: Let XEN/PV use topology from CPUID/MADT (David Arcari) [RHEL-43147]
- x86/acpi: Dont invoke topology_register_apic() for XEN PV (David Arcari) [RHEL-43147]
- x86/xen/smp_pv: Count number of vCPUs early (David Arcari) [RHEL-43147]
- x86/xen/smp_pv: Register fake APICs (David Arcari) [RHEL-43147]
- x86/mpparse: Switch to new init callbacks (David Arcari) [RHEL-43147]
- x86/mpparse: Provide separate early/late callbacks (David Arcari) [RHEL-43147]
- x86/dtb: Rename x86_dtb_init() (David Arcari) [RHEL-43147]
- x86/mpparse: Prepare for callback separation (David Arcari) [RHEL-43147]
- x86/xen/smp_pv: Prepare for separate mpparse callbacks (David Arcari) [RHEL-43147]
- x86/mpparse: Rename default_find_smp_config() (David Arcari) [RHEL-43147]
- x86/xen/smp_pv: Remove cpudata fiddling (David Arcari) [RHEL-43147]
- x86/cpu/topology: Assign hotpluggable CPUIDs during init (David Arcari) [RHEL-43147]
- x86/cpu/topology: Reject unknown APIC IDs on ACPI hotplug (David Arcari) [RHEL-43147]
- x86/topology: Add a mechanism to track topology via APIC IDs (David Arcari) [RHEL-43147]
- x86/cpu: Detect real BSP on crash kernels (David Arcari) [RHEL-43147]
- x86/cpu/topology: Rework possible CPU management (David Arcari) [RHEL-43147]
- x86/cpu/topology: Sanitize the APIC admission logic (David Arcari) [RHEL-43147]
- x86/cpu/topology: Use a data structure for topology info (David Arcari) [RHEL-43147]
- x86/cpu/topology: Simplify APIC registration (David Arcari) [RHEL-43147]
- x86/cpu/topology: Confine topology information (David Arcari) [RHEL-43147]
- x86/mpparse: Use new APIC registration function (David Arcari) [RHEL-43147]
- x86/acpi: Use new APIC registration functions (David Arcari) [RHEL-43147]
- x86/cpu/topology: Provide separate APIC registration functions (David Arcari) [RHEL-43147]
- x86/cpu/topology: Move registration out of APIC code (David Arcari) [RHEL-43147]
- x86/apic/msi: Use DOMAIN_BUS_GENERIC_MSI for HPET/IO-APIC domain search (David Arcari) [RHEL-43147]
- x86/apic: Use a proper define for invalid ACPI CPU ID (David Arcari) [RHEL-43147]
- x86/apic: Remove yet another dubious callback (David Arcari) [RHEL-43147]
- x86/apic: Remove the pointless writeback of boot_cpu_physical_apicid (David Arcari) [RHEL-43147]
- x86/mpparse: Remove the physid_t bitmap wrapper (David Arcari) [RHEL-43147]
- x86/apic: Remove check_apicid_used() and ioapic_phys_id_map() (David Arcari) [RHEL-43147]
- x86/ioapic: Simplify setup_ioapic_ids_from_mpc_nocheck() (David Arcari) [RHEL-43147]
- x86/ioapic: Make io_apic_get_unique_id() simpler (David Arcari) [RHEL-43147]
- x86/apic: Get rid of get_physical_broadcast() (David Arcari) [RHEL-43147]
- x86/ioapic: Replace some more set bit nonsense (David Arcari) [RHEL-43147]
- x86/platform/ce4100: Dont override x86_init.mpparse.setup_ioapic_ids (David Arcari) [RHEL-43147]
- x86/apic: Remove unused phys_pkg_id() callback (David Arcari) [RHEL-43147]
- arch/x86: Fix typos (David Arcari) [RHEL-43147]
- x86/cpu/topology: Make the APIC mismatch warnings complete (David Arcari) [RHEL-43147]
- x86/cpu: Remove topology.c (David Arcari) [RHEL-43147]
- x86/cpu: Make topology_amd_node_id() use the actual node info (David Arcari) [RHEL-43147]
- x86/cpu: Use common topology code for HYGON (David Arcari) [RHEL-43147]
- x86/cpu: Use common topology code for AMD (David Arcari) [RHEL-43147]
- x86/cpu: Provide an AMD/HYGON specific topology parser (David Arcari) [RHEL-43147]
- x86/cpu: Provide cpuid_read() et al. (David Arcari) [RHEL-43147]
- x86/cpu: Use common topology code for Intel (David Arcari) [RHEL-43147]
- x86/cpu: Provide a sane leaf 0xb/0x1f parser (David Arcari) [RHEL-43147]
- x86/cpu: Move __max_die_per_package to common.c (David Arcari) [RHEL-43147]
- x86/cpu: Use common topology code for Centaur and Zhaoxin (David Arcari) [RHEL-43147]
- x86/cpu: Add legacy topology parser (David Arcari) [RHEL-43147]
- x86/cpu: Provide cpu_init/parse_topology() (David Arcari) [RHEL-43147]
- drivers: base: Move cpu_dev_init() after node_dev_init() (David Arcari) [RHEL-43147]
- base/node.c: initialize the accessor list before registering (David Arcari) [RHEL-43147]
- Revert "x86/topology: Fix max_siblings calculation for some hybrid cpus" (David Arcari) [RHEL-43147]


###
# The following Emacs magic makes C-c C-e use UTC dates.
# Local Variables:
# rpm-change-log-uses-utc: t
# End:
###