Name:           nabu-device-config
Version:        1
Release:        8.test%{?dist}
Summary:        Xiaomi Pad 5 device policy, sensor and input configuration
License:        GPL-3.0-or-later
URL:            https://copr.fedorainfracloud.org/coprs/mcc45tr/nabu-linux/
Source0:        %{name}-%{version}.tar.zst
BuildArch:      noarch
BuildRequires:  systemd-rpm-macros
BuildRequires:  systemd-udev
Requires:       systemd-udev
Provides:       xiaomi-nabu-configs = %{version}-%{release}
Obsoletes:      xiaomi-nabu-configs < %{version}-%{release}

%description
Device policy for Xiaomi Pad 5 (nabu), including input calibration, sensor
service defaults, udev rules and boot-noise suppression. Kernel-owned hardware
properties, such as accelerometer mounting, remain supplied by the Nabu kernel
rather than duplicated in userspace.

%prep
%autosetup

%build

%install
install -Dm0644 payload/usr/lib/udev/rules.d/99-libinput-calibration-matrix.rules \
    %{buildroot}%{_udevrulesdir}/99-libinput-calibration-matrix.rules
install -d -m0755 %{buildroot}%{_sysconfdir}/modules-load.d
ln -s /dev/null %{buildroot}%{_sysconfdir}/modules-load.d/scsi_dh.conf

%check
udevadm verify %{buildroot}%{_udevrulesdir}/99-libinput-calibration-matrix.rules

%posttrans
if [ -x /usr/bin/udevadm ]; then
    /usr/bin/udevadm control --reload >/dev/null 2>&1 || :
    /usr/bin/udevadm trigger --action=change \
        --subsystem-match=misc --sysname-match='fastrpc-adsp*' >/dev/null 2>&1 || :
    /usr/bin/udevadm trigger --action=change \
        --subsystem-match=misc --sysname-match='fastrpc-sdsp*' >/dev/null 2>&1 || :
fi
if [ -x /usr/bin/systemctl ]; then
    case "$(/usr/bin/systemctl is-system-running 2>/dev/null || :)" in
        running|degraded)
            /usr/bin/systemctl try-restart iio-sensor-proxy.service >/dev/null 2>&1 || :
            ;;
    esac
fi

%files
%license LICENSE
%doc README.md
%{_udevrulesdir}/99-libinput-calibration-matrix.rules
%{_sysconfdir}/modules-load.d/scsi_dh.conf

%changelog
* Fri Aug 21 2026 SENEMOS Project <senemos@localhost> - 1-7.test
- Mask the generic multipath SCSI handler list on the UFS-only Nabu profile.
- Eliminate three deterministic missing-module errors without granting access
  or adding userspace boot helpers.

* Thu Aug 20 2026 mcc45tr - 1-6.test
- Drop the duplicate SSC orientation rule now provided by kernel sysfs.
- Keep only the touch/input calibration required outside the kernel.

* Thu Aug 20 2026 mcc45tr - 1-5.test
- Correct SSC orientation on both ADSP and SDSP discovery paths.
- Reload udev and restart SensorProxy during normal package updates.
- Remove the obsolete empty device-rotate compatibility file.