From 14cab84172c96c94f34917f713578902bfecc803 Mon Sep 17 00:00:00 2001
From: mcc45tr <mcc45tr@gmail.com>
Date: Mon, 7 Sep 2026 21:53:56 +0300
Subject: [PATCH 5/5] arm64: dts: qcom: make Nabu nodes schema compliant

---
 arch/arm64/boot/dts/qcom/pm8150.dtsi          |  3 +-
 .../boot/dts/qcom/sm8150-xiaomi-nabu.dts      | 32 ++++++++-----------
 2 files changed, 16 insertions(+), 19 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
index 51a745045eb0..18958b719bcc 100644
--- a/arch/arm64/boot/dts/qcom/pm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
@@ -125,11 +125,12 @@ pm8150_rtc: rtc@6000 {
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
 		};
 
-		pm8150_sdam_2: sdam@b100 {
+		pm8150_sdam_2: nvram@b100 {
 			compatible = "qcom,spmi-sdam";
 			reg = <0xb100>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+			ranges = <0 0xb100 0x100>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/sm8150-xiaomi-nabu.dts b/arch/arm64/boot/dts/qcom/sm8150-xiaomi-nabu.dts
index c547f69d6a42..3c7e60ecdbff 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-xiaomi-nabu.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-xiaomi-nabu.dts
@@ -794,7 +794,7 @@ &pm8150b_charger {
 
 &{/thermal-zones/cpu0-thermal} {
 	cooling-maps {
-		nabu-charge-map {
+		map-nabu-charge {
 			trip = <&cpu0_alert0>;
 			cooling-device = <&pm8150b_charger 1 15>;
 		};
@@ -803,7 +803,7 @@ nabu-charge-map {
 
 &{/thermal-zones/cpu4-top-thermal} {
 	cooling-maps {
-		nabu-charge-map {
+		map-nabu-charge {
 			trip = <&cpu4_top_alert0>;
 			cooling-device = <&pm8150b_charger 1 15>;
 		};
@@ -812,7 +812,7 @@ nabu-charge-map {
 
 &{/thermal-zones/gpu-top-thermal} {
 	cooling-maps {
-		nabu-charge-map {
+		map-nabu-charge {
 			trip = <&gpu_top_alert0>;
 			cooling-device = <&pm8150b_charger 1 15>;
 		};
@@ -821,7 +821,7 @@ nabu-charge-map {
 
 &{/thermal-zones/pm8150b-thermal} {
 	cooling-maps {
-		nabu-charge-map {
+		map-nabu-charge {
 			trip = <&pm8150b_trip0>;
 			cooling-device = <&pm8150b_charger 8 15>;
 		};
@@ -1112,48 +1112,46 @@ rx-pins {
 	};
 
 	qup_uart13_sleep: qup-uart13-sleep-state {
-		pinmux {
-			pins = "gpio43", "gpio44",
-			       "gpio45", "gpio46";
-			function = "gpio";
-		};
-
-		pinconf-cts {
+		cts-pins {
 			/*
 			 * Configure a pull-down on CTS to match the pull of
 			 * the Bluetooth module.
 			 */
 			pins = "gpio43";
+			function = "gpio";
 			bias-pull-down;
 		};
 
-		pinconf-rts {
+		rts-pins {
 			/*
 			 * Configure pull-down on RTS. As RTS is active low
 			 * signal, pull it low to indicate the BT SoC that it
 			 * can wakeup the system anytime from suspend state by
 			 * pulling RX low (by sending wakeup bytes).
 			 */
-			 pins = "gpio44";
-			 bias-pull-down;
+			pins = "gpio44";
+			function = "gpio";
+			bias-pull-down;
 		};
 
-		pinconf-tx {
+		tx-pins {
 			/*
 			 * Configure pull-up on TX when it isn't actively driven
 			 * to prevent BT SoC from receiving garbage during sleep.
 			 */
 			pins = "gpio45";
+			function = "gpio";
 			bias-pull-up;
 		};
 
-		pinconf-rx {
+		rx-pins {
 			/*
 			 * Configure a pull-up on RX. This is needed to avoid
 			 * garbage data when the TX pin of the Bluetooth module
 			 * is floating which may cause spurious wakeups.
 			 */
 			pins = "gpio46";
+			function = "gpio";
 			bias-pull-up;
 		};
 	};
@@ -1179,7 +1177,6 @@ detect-pins {
 			function = "gpio";
 			drive-strength = <2>;
 			bias-pull-up;
-			input-enable;
 		};
 	};
 
@@ -1196,7 +1193,6 @@ detect-pins {
 			function = "gpio";
 			drive-strength = <2>;
 			bias-pull-up;
-			input-enable;
 		};
 	};