# 3D Slicer Preview — same packaging strategy as 3dslicer, but tracks the # Slicer/Slicer `main` branch HEAD instead of a tagged release. Coexists # with the stable 3dslicer package via parallel-install (separate # install root + separate /usr/bin entry point: `slicer-preview`). # # Bumping policy: refresh %{snapdate}/%{commit} to the most recent main # branch HEAD whenever rebuilding. The release suffix encodes the date # so subsequent rebuilds compare cleanly. %global snapdate 20260628 %global commit 9774a684fb062714f5cc7e0e732c5d036d3dd87f %global shortcommit %(c=%{commit}; echo ${c:0:8}) # Nominal version tracks Slicer's dev minor (5.13.0, odd = dev). RPM treats # 5.13.0~preview as newer than stable 3dslicer 5.12.0 (even = stable), and a # future 5.13.0 tag would compare cleanly newer than this preview snapshot. %global preview_ver 5.13.0~preview.%{snapdate}git%{shortcommit} %global slicer_inst %{_prefix}/lib/slicer-preview # Nightly CTest dashboard switch. Default OFF so the shipped RPM never carries # test binaries. Build the dashboard tree with `rpmbuild -bc --with testing ...` # to compile Slicer's CTest suite against this EXACT Fedora (system-libs) config, # then run `ctest` in the build tree. This is how the CDash nightly tests the # Fedora build itself (not an upstream superbuild). See cdash-driver/. %bcond_with testing %define debug_package %{nil} # Disable LTO — Fedora's default -flto=auto -ffat-lto-objects roughly doubles # C++ compile time and inflates link memory. See 3dslicer: with LTO the build # times out; LTO off ~halves compile time. %global _lto_cflags %{nil} # Build single-threaded. At higher -j the ~16 simultaneous Qt/VTK-heavy module # compiles that start at ninja step ~705 blow memory on low-RAM COPR builders # and swap-stall (3dslicer proved -j8/-j4/-j2 all stall there). -j1 + a raised # --timeout 86400 on submission is the working combination. # ONLY for the shipped/COPR build: the --with testing dashboard runs on real # boxes with plenty of RAM, where -j1 wastes the machine — there we let the # CTest driver pass its own -j via --define "_smp_mflags". %if %{without testing} %global _smp_mflags -j1 %endif # Slicer's ctkAppLauncher shebang normalization can leave a /usr/bin/python-real # auto-dependency that no package provides; exclude it as a backstop. %global __requires_exclude ^/usr/bin/python-real$ Name: slicer-preview Version: %{preview_ver} Release: 8%{?dist} Summary: 3D Slicer development snapshot (main branch) for medical image analysis License: BSD-3-Clause URL: https://slicer.org/ Source0: https://github.com/Slicer/Slicer/archive/%{commit}/Slicer-preview-%{shortcommit}.tar.gz # Profile.d hook (shared script: re-uses logic from stable, looks for # both slicer-VER and slicer-preview) Source1: slicer-preview.sh # Python 3.14 (F44/rawhide) removed the private _PyInterpreterState_GetConfigCopy # / _PyInterpreterState_SetConfig functions that qSlicerCoreApplication used to # refresh sys.argv post-PythonQt. Rewrite that block to set sys.argv via the # stable public API (PySys_SetObject). Same fix carried by 3dslicer.spec. Patch0: slicer-python314-interpreter-config.patch # Build infrastructure — same as 3dslicer; see 3dslicer.spec for rationale. BuildRequires: cmake >= 3.20.6 BuildRequires: ninja-build BuildRequires: gcc-c++ BuildRequires: gcc-gfortran BuildRequires: git-core BuildRequires: python3-devel BuildRequires: xxd BuildRequires: cmake(Qt6Core) BuildRequires: cmake(Qt6Gui) BuildRequires: cmake(Qt6Widgets) BuildRequires: cmake(Qt6OpenGL) BuildRequires: cmake(Qt6OpenGLWidgets) BuildRequires: cmake(Qt6Network) BuildRequires: cmake(Qt6Sql) BuildRequires: cmake(Qt6Svg) BuildRequires: cmake(Qt6Multimedia) BuildRequires: cmake(Qt6MultimediaWidgets) BuildRequires: cmake(Qt6Xml) BuildRequires: cmake(Qt6Concurrent) BuildRequires: cmake(Qt6PrintSupport) BuildRequires: cmake(Qt6Qml) BuildRequires: cmake(Qt6Quick) BuildRequires: cmake(Qt6WebEngineCore) BuildRequires: cmake(Qt6WebEngineWidgets) BuildRequires: cmake(Qt6WebChannel) BuildRequires: cmake(Qt6Test) BuildRequires: cmake(Qt6LinguistTools) BuildRequires: cmake(Qt6UiTools) BuildRequires: cmake(Qt6Designer) BuildRequires: cmake(Qt6Core5Compat) BuildRequires: qt6-qttools-devel BuildRequires: InsightToolkit5-devel >= 5.4.6 BuildRequires: InsightToolkit5-vtk-devel >= 5.4.6 BuildRequires: vtk-devel >= 9.6 BuildRequires: ctk-devel # CTK is built with CTK_USE_QTTESTING=ON, so CTKConfig.cmake always calls # find_dependency(QtTesting); qMRML*EventPlayer sources also link CTKQtTesting. BuildRequires: qttesting-devel # Slicer_USE_PYTHONQT=ON: find_package(PythonQt REQUIRED) + Python-scripted layer. BuildRequires: python-pythonqt-devel # Pulled in transitively by Slicer's cmake config consumers (VTK/SEM). BuildRequires: cli11-devel BuildRequires: vtkAddon-devel BuildRequires: qRestAPI-devel BuildRequires: commontk-applauncher-devel BuildRequires: python-simpleitk BuildRequires: dcmtk-devel BuildRequires: teem-devel BuildRequires: SlicerExecutionModel-devel BuildRequires: jsoncpp-devel BuildRequires: rapidjson-devel BuildRequires: libarchive-devel BuildRequires: tbb-devel BuildRequires: zlib-devel BuildRequires: openssl-devel BuildRequires: libcurl-devel BuildRequires: libxml2-devel BuildRequires: expat-devel BuildRequires: bzip2-devel BuildRequires: freetype-devel BuildRequires: fontconfig-devel BuildRequires: fmt-devel BuildRequires: pugixml-devel BuildRequires: utf8cpp-devel BuildRequires: PEGTL-devel BuildRequires: nlohmann-json-devel BuildRequires: json-devel BuildRequires: lz4-devel BuildRequires: xz-devel BuildRequires: double-conversion-devel BuildRequires: glew-devel BuildRequires: libogg-devel BuildRequires: libtheora-devel BuildRequires: sqlite-devel BuildRequires: libharu-devel BuildRequires: proj-devel BuildRequires: gdal-devel BuildRequires: netcdf-cxx-devel BuildRequires: cgnslib-devel BuildRequires: libpq-devel BuildRequires: mariadb-connector-c-devel BuildRequires: openslide-devel BuildRequires: libtiff-devel BuildRequires: libpng-devel BuildRequires: libjpeg-turbo-devel BuildRequires: mesa-libGL-devel BuildRequires: libX11-devel BuildRequires: libXext-devel BuildRequires: libXt-devel BuildRequires: libXcursor-devel BuildRequires: hdf5-devel BuildRequires: boost-devel BuildRequires: gdcm-devel BuildRequires: python3-pip BuildRequires: python3-numpy Requires: qt6-qtbase Requires: qt6-qtwebengine Requires: qt6-qtmultimedia Requires: hicolor-icon-theme Requires: libGL # DICOM/Python-scripted layer: Slicer's DICOMLib imports these at module load. Requires: python3-dicomweb-client Requires: python3-highdicom Requires: python3-legacy-cgi # vtkAddon runtime: the unversioned libvtkAddon.so has no auto-generated SONAME # dep, and Slicer's bin/Python/vtkAddon.py does "from vtkAddonPython import *" # (ships in python3-vtkAddon). Pull both explicitly. Requires: vtkAddon Requires: python3-vtkAddon %description 3D Slicer Preview tracks the current Slicer development branch (main) and is intended for users who want access to features and bug-fixes that have landed since the current stable release (5.12.0). This package coexists with the stable 3dslicer package via parallel install: stable installs to /usr/lib/slicer and is invoked as `Slicer`; preview installs to /usr/lib/slicer-preview and is invoked as `slicer-preview`. User settings and downloaded extensions are revision-keyed under ~/.config/slicer.org, so the two stay isolated. Use stable for routine work; use preview to validate upcoming-release behaviour or to use new modules before they reach a tagged release. %package devel Summary: Development headers for 3D Slicer Preview Requires: %{name}%{?_isa} = %{version}-%{release} %description devel Headers, cmake config files, and devel symlinks for building Slicer extension modules against the preview channel out of tree. %prep %autosetup -p1 -n Slicer-%{commit} # Sanity patch: relax Slicer_REQUIRED_PYTHON_VERSION strict-equal to allow # Fedora's Python 3.14 (Slicer pins 3.12.10 nominally). sed -i 's/Slicer_REQUIRED_PYTHON_VERSION "3\.[0-9]*\.[0-9]*")/Slicer_REQUIRED_PYTHON_VERSION "3.12.0")/' CMakeLists.txt 2>/dev/null || : # --------------------------------------------------------------------------- # System-libs (non-superbuild) source-bug fixes — ported verbatim from the # battle-tested stable 3dslicer spec. 5.13 (main HEAD) and 5.12 share these # trees, so the same fixes apply. See 3dslicer.spec for the full rationale. # --------------------------------------------------------------------------- # Short-circuit SlicerBlockInstallTBB. It expects to bundle specific TBB SONAME # versions that don't exist on Fedora; as an RPM we rely on the system tbb. echo 'return()' > CMake/SlicerBlockInstallTBB.cmake # VTK linkage: Fedora's modular VTK leaves several modules out of the legacy # VTK_LIBRARIES that Slicer libs link, so they fail with undefined references. # Force the requested VTK:: targets (+ the foundational Common* family) onto # link_libraries() right after find_package(VTK). python3 - CMakeLists.txt <<'PYEOF' import sys, re f = sys.argv[1]; s = open(f).read() inj = ("\n# Fedora modular-VTK linkage fix (packaging): the new VTK no longer puts the\n" "# full module closure into the legacy VTK_LIBRARIES that several Slicer libs\n" "# link, so they fail with undefined references (vtkImageAccumulate,\n" "# vtkExtractSelection, vtkPolyDataToImageStencil, vtkTimerLog, ...). Rather\n" "# than chase modules one at a time, link every component Slicer already\n" "# requested (Slicer_VTK_COMPONENTS) PLUS the foundational Common* family that\n" "# Slicer libs reference transitively but the components list omits (vtkTimerLog\n" "# = CommonSystem); link them all onto every target defined afterwards via\n" "# link_libraries() (--as-needed drops the unused ones). Robust against any\n" "# VTK_LIBRARIES scope/propagation gaps without per-module whack-a-mole.\n" "set(_PKGVTK_EXTRA\n" " CommonCore CommonSystem CommonMath CommonMisc CommonTransforms\n" " CommonExecutionModel CommonDataModel CommonColor CommonComputationalGeometry\n" " FiltersCore FiltersGeneral FiltersGeometry FiltersSources\n" " ImagingCore ImagingGeneral)\n" "foreach(_vmod ${Slicer_VTK_COMPONENTS} ${_PKGVTK_EXTRA})\n" " if(TARGET VTK::${_vmod})\n" " link_libraries(VTK::${_vmod})\n" " else()\n" " message(WARNING \"PKGVTKFIX: VTK::${_vmod} is NOT a target\")\n" " endif()\n" "endforeach()\n" "message(STATUS \"PKGVTKFIX: link_libraries over components + Common* done\")\n") s2 = re.sub(r'(find_package\(VTK [^\n]*COMPONENTS[^\n]*REQUIRED\)\n)', lambda m: m.group(1) + inj, s, count=1) assert s2 != s, "find_package(VTK COMPONENTS) anchor not found" open(f, "w").write(s2) print("VTK link_libraries fix injected") PYEOF # Slicer source bug #1: 4 Libs/*/CMakeLists.txt use POSIX-regex alternation # in cmake glob patterns: `file(GLOB headers "...*.(h|hxx)")`. cmake's # file(GLOB) doesn't support alternation — globs return empty. Rewrite to # two valid glob patterns separated by a space. for f in Libs/vtkTeem/CMakeLists.txt \ Libs/vtkSegmentationCore/CMakeLists.txt \ Libs/vtkITK/CMakeLists.txt \ Libs/ITKFactoryRegistration/CMakeLists.txt; do sed -i 's|file(GLOB headers "${CMAKE_CURRENT_SOURCE_DIR}/\*\.(h\|hxx)")|file(GLOB headers "${CMAKE_CURRENT_SOURCE_DIR}/*.h" "${CMAKE_CURRENT_SOURCE_DIR}/*.hxx")|' "$f" done # Slicer expects an itkNamespace.h header that its SuperBuild normally patches # into ITK's source tree. Since we don't superbuild, the file is just missing. # Stub it locally in each Libs/ that includes it. cat > Libs/ITKFactoryRegistration/itkNamespace.h <<'EOF' // Stub for Fedora packaging. Slicer SuperBuild normally patches this // file into ITK's source; we don't superbuild. #ifndef itkNamespace_h #define itkNamespace_h namespace itk {} #endif EOF cp -p Libs/ITKFactoryRegistration/itkNamespace.h Libs/vtkITK/itkNamespace.h # Slicer source bug #2: 4 Libs/*/CMakeLists.txt reference # ${CMAKE_CURRENT_BINARY_DIR}/${configure_header_file} in install(FILES ...) # but never set(configure_header_file ...) so the var is empty and install # gets a trailing-slash directory path, aborting. Drop the unresolved ref. for f in Libs/vtkTeem/CMakeLists.txt \ Libs/MRML/CLI/CMakeLists.txt \ Libs/RemoteIO/CMakeLists.txt \ Libs/MRML/Logic/CMakeLists.txt; do sed -i 's| ${CMAKE_CURRENT_BINARY_DIR}/${configure_header_file}||' "$f" done # Slicer source bug #3: Base/QTCore/Testing/Python/CMakeLists.txt installs its # generic Python test template from ${CMAKE_CURRENT_BINARY_DIR}, but nothing # stages it there — it's a verbatim template in the source tree. Install from # source so %install doesn't abort with BUILD_TESTING=OFF + dev install. sed -i 's|${CMAKE_CURRENT_BINARY_DIR}/qSlicerModuleGenericTest.py.in|${CMAKE_CURRENT_SOURCE_DIR}/qSlicerModuleGenericTest.py.in|' \ Base/QTCore/Testing/Python/CMakeLists.txt # Slicer source bug (only bites BUILD_TESTING=ON, i.e. the CTest dashboard): # SlicerMacroConfigureModuleCxxTestDriver unconditionally #includes # vtkWin32OutputWindow.h in every generated module CxxTest driver, while the code # that USES it is correctly #ifdef _WIN32-guarded. With system VTK 9.6 that # Windows-only header is absent on Linux, so all ~10 module test drivers FTBFS # (fatal error: vtkWin32OutputWindow.h: No such file). Drop the unconditional # include (swap for the harmless vtkVersionMacros.h already pulled in); the # _WIN32-guarded usage is not compiled on Linux. Harmless when testing is OFF. sed -i 's|set(EXTRA_INCLUDE "vtkWin32OutputWindow.h|set(EXTRA_INCLUDE "vtkVersionMacros.h|' \ CMake/SlicerMacroConfigureModuleCxxTestDriver.cmake # Slicer source bug #4: SlicerCPack.cmake copies the Qt-designer launcher from # ${CTKAppLauncher_DIR}/bin/ — correct in the superbuild but wrong on Fedora, # where commontk-applauncher splits the binary (%{_bindir}) from its cmake # config (%{_libdir}/cmake/CTKAppLauncher). Point at the real binary location. sed -i 's|${CTKAppLauncher_DIR}/bin/${_launcher}|%{_bindir}/${_launcher}|' \ CMake/SlicerCPack.cmake %build # -I gdcm: Libs/vtkITK includes gdcmDict.h directly but GDCM only comes in # transitively via ITK's use-file, which doesn't propagate with system GDCM. # -I QtTesting / -I PythonQt: installed CTK headers (ctkQtTestingUtility.h, # ctkAbstractPythonManager.h) #include pq*/PythonQt* headers directly, but many # Slicer targets link CTKWidgets (not CTKQtTesting / a PythonQt-bearing CTK lib) # and so never inherit those third-party include dirs. Add them globally. export CXXFLAGS="%{optflags} -std=c++17 -Wno-error -include cstdint -fpermissive -I%{_includedir}/gdcm -I%{_includedir}/QtTesting -I%{_includedir}/PythonQt" export CFLAGS="%{optflags} -Wno-error -std=gnu17" export QT_QPA_PLATFORM=offscreen # Workaround for Fedora teem-devel packaging bug: the shipped TeemConfig.cmake # computes Teem_USE_FILE one parent dir up (/usr/lib64/lib/TeemUse.cmake) but # the config lives in /usr/lib64/cmake/, so the file resolves wrong. Build a # corrected shim in a private dir and point Teem_DIR there. mkdir -p teem-shim cat > teem-shim/TeemConfig.cmake <<'EOF' # Slicer-build shim — corrects path computation that Fedora teem-devel gets # wrong because TeemConfig.cmake is installed in /usr/lib64/cmake/ instead of # /usr/lib64/cmake/Teem/. set(Teem_USE_FILE "%{_libdir}/cmake/TeemUse.cmake") set(Teem_BUILD_SETTINGS_FILE "%{_libdir}/cmake/TeemBuildSettings.cmake") set(Teem_EXECUTABLE_DIRS "%{_bindir}") set(Teem_LIBRARY_DIRS "%{_libdir}") set(Teem_INCLUDE_DIRS "%{_includedir}") set(Teem_LIBRARIES "teem") set(Teem_REQUIRED_C_FLAGS "") set(Teem_VERSION_MAJOR "1") set(Teem_VERSION_MINOR "12") set(Teem_VERSION_PATCH "0") set(Teem_BUILD_SHARED_LIBS "ON") set(Teem_TOOLS "") EOF %cmake -G Ninja \ -DSlicer_SUPERBUILD:BOOL=OFF \ -DSlicer_USE_SYSTEM_ITK:BOOL=ON \ -DSlicer_USE_SYSTEM_VTK:BOOL=ON \ -DSlicer_USE_SYSTEM_CTK:BOOL=ON \ -DSlicer_USE_SYSTEM_DCMTK:BOOL=ON \ `# Use system OpenJPEG so 5.12+ CPack does not fatal bundling it. See 3dslicer.` \ -DSlicer_USE_SYSTEM_OpenJPEG:BOOL=ON \ -DSlicer_USE_SYSTEM_teem:BOOL=ON \ -DSlicer_USE_SYSTEM_SlicerExecutionModel:BOOL=ON \ -DSlicer_USE_SYSTEM_jsoncpp:BOOL=ON \ -DSlicer_USE_SYSTEM_RapidJSON:BOOL=ON \ -DSlicer_USE_SYSTEM_LibArchive:BOOL=ON \ -DSlicer_USE_SYSTEM_python:BOOL=ON \ -DSlicer_USE_SYSTEM_qRestAPI:BOOL=ON \ -DSlicer_USE_SYSTEM_python_SimpleITK:BOOL=ON \ -DITK_DIR:PATH=%{_prefix}/lib/cmake/ITK-5.4 \ -DVTK_DIR:PATH=%{_libdir}/cmake/vtk \ -DCTK_DIR:PATH=%{_libdir}/cmake/CTK \ `# CTKConfig find_dependency(QtTesting) resolves the imported qttesting target.` \ -DQtTesting_DIR:PATH=%{_libdir}/cmake/qttesting \ -DDCMTK_DIR:PATH=%{_libdir}/cmake/dcmtk \ -DCTKAppLauncher_DIR:PATH=%{_libdir}/cmake/CTKAppLauncher \ `# CTKAppLauncherLib is a distinct package to CMake though its config shares` \ `# the CTKAppLauncher dir; point both _DIR variables.` \ -DCTKAppLauncherLib_DIR:PATH=%{_libdir}/cmake/CTKAppLauncher \ -DqRestAPI_DIR:PATH=%{_libdir}/cmake/qRestAPI \ -DPythonQt_DIR:PATH=%{_libdir}/cmake/PythonQt \ `# Slicer's top-level CMakeLists references ${vtkAddon_CMAKE_DIR} directly` \ `# (no find_package(vtkAddon)); set both so the module path + wrap macros resolve.` \ -DvtkAddon_DIR:PATH=%{_libdir}/cmake/vtkAddon \ -DvtkAddon_CMAKE_DIR:PATH=%{_libdir}/cmake/vtkAddon \ `# SlicerExecutionModel ships its config at %{_libdir}/SlicerExecutionModel/` \ `# (not under cmake/), which Slicer's find_package doesn't auto-discover.` \ -DSlicerExecutionModel_DIR:PATH=%{_libdir}/SlicerExecutionModel \ -DGenerateCLP_DIR:PATH=%{_libdir}/GenerateCLP \ -DModuleDescriptionParser_DIR:PATH=%{_libdir}/ModuleDescriptionParser \ `# Point at our local TeemConfig.cmake shim — see %%build above for why.` \ -DTeem_DIR:PATH=$(pwd)/teem-shim \ `# Qt6 detection: SlicerBlockFindQtAndCheckVersion checks if(DEFINED Qt6_DIR)` \ `# to pick Qt6 over Qt5; without it, find_package(Qt5) aborts.` \ -DQt6_DIR:PATH=%{_libdir}/cmake/Qt6 \ `# Store settings + extensions in the user's home, not the read-only system` \ `# tree (else the Extensions Manager fails on a system install). See 3dslicer.` \ -DSlicer_STORE_SETTINGS_IN_APPLICATION_HOME_DIR:BOOL=OFF \ `# Tarball builds have no .git, so pre-define the revision (else it is empty).` \ `# With STORE_SETTINGS=OFF the user-home settings/extensions paths are` \ `# revision-keyed (~/.config/slicer.org/Slicer-.ini, Extensions-), so` \ `# a distinct revision is what keeps this preview isolated from stable 3dslicer` \ `# in parallel installs — and the Extensions Manager queries the server by it.` \ -DSlicer_REVISION:STRING=%{shortcommit} \ -DSlicer_WC_LAST_CHANGED_DATE:STRING=2026-06-28 \ -DSlicer_WC_URL:STRING=https://github.com/Slicer/Slicer/commit/%{commit} \ -DSlicer_USE_PYTHONQT:BOOL=ON \ -DSlicer_USE_NUMPY:BOOL=ON \ -DSlicer_USE_SCIPY:BOOL=ON \ -DSlicer_USE_SimpleITK:BOOL=ON \ -DSlicer_USE_CTKAPPLAUNCHER:BOOL=ON \ -DSlicer_USE_TBB:BOOL=ON \ -DSlicer_USE_QtTesting:BOOL=ON \ -DSlicer_BUILD_CLI:BOOL=ON \ -DSlicer_BUILD_QTLOADABLEMODULES:BOOL=ON \ -DSlicer_BUILD_QTSCRIPTEDMODULES:BOOL=ON \ -DSlicer_BUILD_DICOM_SUPPORT:BOOL=ON \ -DSlicer_BUILD_DIFFUSION_SUPPORT:BOOL=ON \ -DSlicer_BUILD_I18N_SUPPORT:BOOL=OFF \ -DSlicer_BUILD_WEBENGINE_SUPPORT:BOOL=ON \ -DSlicer_BUILD_MULTIMEDIA_SUPPORT:BOOL=ON \ -DSlicer_BUILD_EXTENSIONMANAGER_SUPPORT:BOOL=ON \ -DSlicer_BUILD_APPLICATIONUPDATE_SUPPORT:BOOL=ON \ -DSlicer_BUILD_DOCUMENTATION:BOOL=OFF \ -DSlicer_BUILD_KRB5_GSSAPI_STUB:BOOL=OFF \ -DSlicer_REQUIRED_QT_VERSION:STRING=6.8 \ -DSlicer_VTK_VERSION_MAJOR:STRING=9 \ -DSlicer_VTK_VERSION_MINOR:STRING=6 \ -DSlicer_VTK_SMP_IMPLEMENTATION_TYPE:STRING=TBB \ -DSlicer_INSTALL_NO_DEVELOPMENT:BOOL=OFF \ -DCMAKE_INSTALL_PREFIX:PATH=%{slicer_inst} \ -DSlicer_INSTALL_ROOT:PATH=%{slicer_inst} \ -DSlicer_INSTALL_DEVELOPMENT:BOOL=ON \ -DBUILD_TESTING:BOOL=%{?with_testing:ON}%{!?with_testing:OFF} \ -DBUILD_SHARED_LIBS:BOOL=ON \ -DCMAKE_SKIP_INSTALL_RPATH:BOOL=ON \ -DCMAKE_BUILD_TYPE:STRING=Release \ -DSlicer_USE_VTK_DEBUG_LEAKS:BOOL=OFF %cmake_build %install %cmake_install # Slicer source bug #5/#8: several installed wizard/utility scripts (e.g. # libexec/Slicer-5.13/ExtensionWizard.py, ModuleWizard.py) carry non-system # python shebangs: # - "#!/usr/bin/env python" -> brp-mangle-shebangs rejects (ambiguous), fails %install # - "#!/usr/bin/python-real" -> unsatisfiable Requires: /usr/bin/python-real # Slicer runs these through its own launcher, so the shebang is cosmetic. # Normalize EVERY non-system python shebang on line 1 to /usr/bin/python3. # (Same block 3dslicer.spec carries; %{slicer_inst}-scoped, version-agnostic.) find %{buildroot}%{slicer_inst} -type f -print0 | while IFS= read -r -d '' f; do IFS= read -r line0 < "$f" 2>/dev/null || continue case "$line0" in '#!'*python*) sed -i -E '1s|^#!.*/(env[[:space:]]+)?python[0-9.]*(-real)?$|#!/usr/bin/python3|' "$f" ;; esac done install -D -m 0644 %{SOURCE1} %{buildroot}%{_sysconfdir}/profile.d/slicer-preview.sh install -d %{buildroot}%{_bindir} ln -sf %{slicer_inst}/Slicer %{buildroot}%{_bindir}/slicer-preview %files %license License.txt %doc README.md %{_bindir}/slicer-preview %{_sysconfdir}/profile.d/slicer-preview.sh %{slicer_inst}/ %exclude %{slicer_inst}/include/ %exclude %{slicer_inst}/lib/cmake/ %files devel %{slicer_inst}/include/ %{slicer_inst}/lib/cmake/ %changelog * Fri Jul 10 2026 Morgan Hough - 5.13.0~preview.20260628git9774a684-8 - Add python3-vtkAddon (+ vtkAddon) runtime Requires: Slicer's bin/Python/vtkAddon.py does "from vtkAddonPython import *", which ships in python3-vtkAddon, not vtkAddon-devel — without it, scripted modules fail at runtime with "No module named 'vtkAddonPython'". Caught by the CTest farm. - Add `%%bcond_with testing` + guard `_smp_mflags -j1` behind `%%{without testing}` so the CDash farm can build this exact Fedora config with BUILD_TESTING=ON at full -j; shipped RPM is unchanged (tests off, -j1). - %%prep: drop the unconditional Windows-only vtkWin32OutputWindow.h include the test-driver macro injects (breaks all module CxxTest drivers on Linux with system VTK 9.6 when BUILD_TESTING=ON). * Wed Jul 08 2026 Morgan Hough - 5.13.0~preview.20260628git9774a684-7 - Port the %install shebang-normalization block from 3dslicer.spec. -6 compiled fully (2845/2845, Patch0 python314 fix confirmed working) but died in %install: brp-mangle-shebangs rejected the ambiguous "#!/usr/bin/env python" in libexec/Slicer-5.13/ExtensionWizard.py. Normalize every non-system python shebang under %{slicer_inst} to /usr/bin/python3 (cosmetic; Slicer uses its own launcher). Also picks up ctk 0.18 (import ctk fix) as the repo's current ctk. * Tue Jul 07 2026 Morgan Hough - 5.13.0~preview.20260628git9774a684-6 - Add Patch0 (slicer-python314-interpreter-config.patch): the -5 parity port ported the seds + cmake hints but missed the two actual .patch files. -5 FTBFS on F44 at ninja 351/2845 compiling qSlicerCoreApplication.cxx: '_PyInterpreterState_GetConfigCopy'/'_PyInterpreterState_SetConfig' not declared (Python 3.14 removed these private APIs). Patch rewrites the argv refresh via the stable PySys_SetObject path. Same fix 3dslicer carries. * Wed Jul 01 2026 Morgan Hough - 5.13.0~preview.20260628git9774a684-5 - Full parity port of the stable 3dslicer system-libs build recipe (this preview spec had never built — -1..-4 all FTBFS on missing build machinery): * BuildRequires qttesting-devel, python-pythonqt-devel, cli11-devel. * cmake hints: QtTesting_DIR, PythonQt_DIR, CTKAppLauncherLib_DIR, vtkAddon_DIR + vtkAddon_CMAKE_DIR, SlicerExecutionModel_DIR, GenerateCLP_DIR, ModuleDescriptionParser_DIR, Teem_DIR (shim), Qt6_DIR. * %prep source-bug fixes: SlicerBlockInstallTBB short-circuit, modular-VTK link_libraries injection, GLOB-alternation rewrites, itkNamespace.h stubs, configure_header_file / qSlicerModuleGenericTest / SlicerCPack install seds. * CXXFLAGS -I gdcm/QtTesting/PythonQt; teem-shim for Fedora TeemConfig bug. * LTO off + -j1 (submit with --timeout 86400) to avoid the step-~705 swap-stall. * Requires python3-dicomweb-client/highdicom/legacy-cgi; python-real exclude. * Mon Jun 29 2026 Morgan Hough - 5.13.0~preview.20260628git9774a684-4 - Slicer_USE_SYSTEM_OpenJPEG=ON to fix the 5.12+ CPack OpenJPEG configure fatal (see 3dslicer 5.12.0-3). * Sun Jun 28 2026 Morgan Hough - 5.13.0~preview.20260628git9774a684-3 - Pre-define Slicer_REVISION (=shortcommit) + WC date/URL. With STORE_SETTINGS=OFF the user-home settings/extensions paths are revision-keyed, so a distinct revision is what keeps preview isolated from stable 3dslicer in parallel installs; an empty revision also breaks the Extensions Manager's by-revision server query. 3dslicer already sets this. * Sun Jun 28 2026 Morgan Hough - 5.13.0~preview.20260628git9774a684-2 - Slicer_STORE_SETTINGS_IN_APPLICATION_HOME_DIR=OFF so user settings + extensions land in the user's home, not the read-only install tree (Extensions Manager fix; see 3dslicer 5.12.0-2). * Sun Jun 28 2026 Morgan Hough - 5.13.0~preview.20260628git9774a684-1 - Refresh the dev/preview track from the 5.11.0~preview snapshot to the current 5.13.0 main HEAD (Slicer's dev version; even minor 5.12 is now stable in 3dslicer). Parallel-installable with stable 3dslicer (separate /usr/lib/slicer-preview root + /usr/bin/slicer-preview launcher). * Wed May 27 2026 Morgan Hough - 5.11.0~preview.20260517git208adb86-1 - Initial preview-channel package tracking Slicer main branch. - Same system-deps strategy as the stable 3dslicer package (5.10.0). - Coexists via parallel-install at /usr/lib/slicer-preview/ ; invoked as `slicer-preview` to keep `slicer` pointing at stable.