# Provide a way to skip tests via rpmbuild `--without` # This makes it easier to skip tests in copr repos, where # the qemu test suite is historically flakey %bcond_without check %global libfdt_version 1.6.0 %global libseccomp_version 2.4.0 %global libusbx_version 1.0.23 %global meson_version 0.61.3 %global usbredir_version 0.7.1 %global ipxe_version 20200823-5.git4bd064de %define have_vmsr_helper 0 %global have_memlock_limits 0 %global need_qemu_kvm 0 %ifarch %{ix86} %global kvm_package system-x86 # need_qemu_kvm should only ever be used by x86 %global need_qemu_kvm 1 %define have_vmsr_helper 1 %endif %ifarch x86_64 %global kvm_package system-x86 # need_qemu_kvm should only ever be used by x86 %global need_qemu_kvm 1 %define have_vmsr_helper 1 %endif %ifarch %{power64} %global have_memlock_limits 1 %global kvm_package system-ppc %endif %ifarch s390x %global kvm_package system-s390x %endif %ifarch armv7hl %global kvm_package system-arm %endif %ifarch aarch64 %global kvm_package system-aarch64 %endif %ifarch %{mips} %global kvm_package system-mips %endif %ifarch riscv64 %global kvm_package system-riscv %endif %global modprobe_kvm_conf %{_sourcedir}/kvm.conf %ifarch s390x %global modprobe_kvm_conf %{_sourcedir}/kvm-s390x.conf %endif %ifarch %{ix86} x86_64 %global modprobe_kvm_conf %{_sourcedir}/kvm-x86.conf %endif %global tools_only 0 %global user_static 1 %if 0%{?rhel} # EPEL/RHEL do not have required -static builddeps %global user_static 1 %endif %global have_kvm 0 %if 0%{?kvm_package:1} %global have_kvm 1 %endif # Matches numactl ExcludeArch %global have_numactl 1 %ifarch %{arm} %global have_numactl 0 %endif # Matches spice ExclusiveArch %global have_spice 1 %ifnarch %{ix86} x86_64 %{arm} aarch64 %global have_spice 0 %endif %if 0%{?rhel} >= 9 %global have_spice 1 %endif # Matches xen ExclusiveArch %global have_xen 1 %if 0%{?fedora} %ifarch x86_64 aarch64 %global have_xen 1 %endif %endif %global have_liburing 1 %if 0%{?fedora} %ifnarch %{arm} %global have_liburing 1 %endif %endif %global have_virgl 1 %if 0%{?fedora} %global have_virgl 1 %endif %global have_pmem 0 %ifarch x86_64 %{power64} %global have_pmem 1 %endif %if 0%{?rhel} >= 10 %global have_pmem 0 %endif %global have_jack 1 %if 0%{?rhel} %global have_jack 1 %endif %global have_dbus_display 1 %if %{defined rhel} && 0%{?rhel} < 9 # RHEL/Centos 8 glib is not new enough %global have_dbus_display 0 %endif %global have_libblkio 0 %if 0%{?fedora} >= 37 %global have_libblkio 1 %endif %global have_gvnc_devel 1 %global have_sdl_image 1 %global have_fdt 1 %global have_opengl 1 %global have_usbredir 1 %global enable_werror 0 # Matches edk2.spec ExclusiveArch %global have_edk2 0 %ifarch %{ix86} x86_64 %{arm} aarch64 riscv64 %global have_edk2 1 %endif # All modules should be listed here. %define have_block_rbd 1 %ifarch %{ix86} %{arm} %define have_block_rbd 0 %endif %global have_block_gluster 1 %if 0%{?rhel} >= 9 %global have_block_gluster 0 %endif %define have_block_nfs 1 %if 0%{?fedora} %define have_block_nfs 1 %endif %define have_librdma 1 %ifarch %{arm} %define have_librdma 0 %endif %define have_libcacard 1 %if 0%{?rhel} >= 9 %define have_libcacard 1 %endif %define have_rutabaga_gfx 0 %if 0%{?fedora} >= 40 %ifarch x86_64 aarch64 %define have_rutabaga_gfx 1 %endif %endif # LTO still has issues with qemu on armv7hl and aarch64 # https://bugzilla.redhat.com/show_bug.cgi?id=1952483 %global _lto_cflags %{nil} %global firmwaredirs "%{_datadir}/qemu-firmware:%{_datadir}/ipxe/qemu:%{_datadir}/seavgabios:%{_datadir}/seabios" %global qemudocdir %{_docdir}/%{name} %define evr %{epoch}:%{version}-%{release} %if %{have_libblkio} %define requires_block_blkio Requires: %{name}-block-blkio = %{evr} %else %define requires_block_blkio %{nil} %endif %define requires_block_curl Requires: %{name}-block-curl = %{evr} %define requires_block_dmg Requires: %{name}-block-dmg = %{evr} %if %{have_block_gluster} %define requires_block_gluster Requires: %{name}-block-gluster = %{evr} %define obsoletes_block_gluster %{nil} %else %define requires_block_gluster %{nil} %define obsoletes_block_gluster Obsoletes: %{name}-block-gluster < %{evr} %endif %define requires_block_iscsi Requires: %{name}-block-iscsi = %{evr} %if %{have_block_nfs} %define requires_block_nfs Requires: %{name}-block-nfs = %{evr} %define obsoletes_block_nfs %{nil} %else %define requires_block_nfs %{nil} %define obsoletes_block_nfs Obsoletes: %{name}-block-nfs < %{evr} %endif %if %{have_block_rbd} %define requires_block_rbd Requires: %{name}-block-rbd = %{evr} %define obsoletes_block_rbd %{nil} %else %define requires_block_rbd %{nil} %define obsoletes_block_rbd Obsoletes: %{name}-block-rbd < %{evr} %endif %define requires_block_ssh Requires: %{name}-block-ssh = %{evr} %define requires_audio_alsa Requires: %{name}-audio-alsa = %{evr} %define requires_audio_oss Requires: %{name}-audio-oss = %{evr} %define requires_audio_pa Requires: %{name}-audio-pa = %{evr} %if 0%{?fedora} %define requires_audio_pipewire Requires: %{name}-audio-pipewire = %{evr} %else %define requires_audio_pipewire %{nil} %endif %define requires_audio_sdl Requires: %{name}-audio-sdl = %{evr} %define requires_char_baum Requires: %{name}-char-baum = %{evr} %define requires_device_usb_host Requires: %{name}-device-usb-host = %{evr} %define requires_device_usb_redirect Requires: %{name}-device-usb-redirect = %{evr} %define requires_ui_curses Requires: %{name}-ui-curses = %{evr} %define requires_ui_gtk Requires: %{name}-ui-gtk = %{evr} %define requires_ui_sdl Requires: %{name}-ui-sdl = %{evr} %define requires_ui_egl_headless Requires: %{name}-ui-egl-headless = %{evr} %define requires_ui_opengl Requires: %{name}-ui-opengl = %{evr} %define requires_device_display_virtio_gpu Requires: %{name}-device-display-virtio-gpu = %{evr} %define requires_device_display_virtio_gpu_pci Requires: %{name}-device-display-virtio-gpu-pci = %{evr} %define requires_device_display_virtio_gpu_ccw Requires: %{name}-device-display-virtio-gpu-ccw = %{evr} %define requires_device_display_virtio_vga Requires: %{name}-device-display-virtio-vga = %{evr} %define requires_package_qemu_pr_helper Requires: qemu-pr-helper %ifnarch %{ix86} %define requires_package_virtiofsd Requires: virtiofsd %define obsoletes_package_virtiofsd Obsoletes: %{name}-virtiofsd < %{evr} %else %define requires_package_virtiofsd %{nil} %define obsoletes_package_virtiofsd Obsoletes: %{name}-virtiofsd < %{evr} %endif %if %{have_virgl} %define requires_device_display_vhost_user_gpu Requires: %{name}-device-display-vhost-user-gpu = %{evr} %define requires_device_display_virtio_gpu_gl Requires: %{name}-device-display-virtio-gpu-gl = %{evr} %define requires_device_display_virtio_gpu_pci_gl Requires: %{name}-device-display-virtio-gpu-pci-gl = %{evr} %define requires_device_display_virtio_vga_gl Requires: %{name}-device-display-virtio-vga-gl = %{evr} %else %define requires_device_display_vhost_user_gpu %{nil} %define requires_device_display_virtio_gpu_gl %{nil} %define requires_device_display_virtio_gpu_pci_gl %{nil} %define requires_device_display_virtio_vga_gl %{nil} %endif %if %{have_rutabaga_gfx} %define requires_device_display_virtio_gpu_rutabaga Requires: %{name}-device-display-virtio-gpu-rutabaga = %{evr} %define requires_device_display_virtio_gpu_pci_rutabaga Requires: %{name}-device-display-virtio-gpu-pci-rutabaga = %{evr} %define requires_device_display_virtio_vga_rutabaga Requires: %{name}-device-display-virtio-vga-rutabaga = %{evr} %else %define requires_device_display_virtio_gpu_rutabaga %{nil} %define requires_device_display_virtio_gpu_pci_rutabaga %{nil} %define requires_device_display_virtio_vga_rutabaga %{nil} %endif %if %{have_jack} %define jack_drv jack, %define requires_audio_jack Requires: %{name}-audio-jack = %{evr} %else %define requires_audio_jack %{nil} %endif %if %{have_dbus_display} %define requires_audio_dbus Requires: %{name}-audio-dbus = %{evr} %define requires_ui_dbus Requires: %{name}-ui-dbus = %{evr} %else %define requires_audio_dbus %{nil} %define requires_ui_dbus %{nil} %endif %if %{have_spice} %define requires_ui_spice_app Requires: %{name}-ui-spice-app = %{evr} %define requires_ui_spice_core Requires: %{name}-ui-spice-core = %{evr} %define requires_device_display_qxl Requires: %{name}-device-display-qxl = %{evr} %define requires_audio_spice Requires: %{name}-audio-spice = %{evr} %define requires_char_spice Requires: %{name}-char-spice = %{evr} %else %define requires_ui_spice_app %{nil} %define requires_ui_spice_core %{nil} %define requires_device_display_qxl %{nil} %define requires_audio_spice %{nil} %define requires_char_spice %{nil} %endif %if %{have_libcacard} %define requires_device_usb_smartcard Requires: %{name}-device-usb-smartcard = %{evr} %else %define requires_device_usb_smartcard %{nil} %endif %global requires_all_modules \ %{requires_block_blkio} \ %{requires_block_curl} \ %{requires_block_dmg} \ %{requires_block_gluster} \ %{requires_block_iscsi} \ %{requires_block_nfs} \ %{requires_block_rbd} \ %{requires_block_ssh} \ %{requires_audio_alsa} \ %{requires_audio_dbus} \ %{requires_audio_oss} \ %{requires_audio_pa} \ %{requires_audio_pipewire} \ %{requires_audio_sdl} \ %{requires_audio_jack} \ %{requires_audio_spice} \ %{requires_ui_curses} \ %{requires_ui_gtk} \ %{requires_ui_sdl} \ %{requires_ui_egl_headless} \ %{requires_ui_opengl} \ %{requires_ui_spice_app} \ %{requires_ui_spice_core} \ %{requires_char_baum} \ %{requires_char_spice} \ %{requires_device_display_qxl} \ %{requires_device_display_vhost_user_gpu} \ %{requires_device_display_virtio_gpu} \ %{requires_device_display_virtio_gpu_ccw} \ %{requires_device_display_virtio_gpu_gl} \ %{requires_device_display_virtio_gpu_rutabaga} \ %{requires_device_display_virtio_gpu_pci} \ %{requires_device_display_virtio_gpu_pci_gl} \ %{requires_device_display_virtio_gpu_pci_rutabaga} \ %{requires_device_display_virtio_vga} \ %{requires_device_display_virtio_vga_gl} \ %{requires_device_display_virtio_vga_rutabaga} \ %{requires_device_usb_host} \ %{requires_device_usb_redirect} \ %{requires_device_usb_smartcard} \ %{requires_package_qemu_pr_helper} \ %{requires_package_virtiofsd} \ # Modules which can be conditionally built %global obsoletes_some_modules \ %{obsoletes_block_gluster} \ %{obsoletes_block_rbd} \ %{obsoletes_package_virtiofsd} \ Obsoletes: %{name}-system-lm32 <= %{epoch}:%{version}-%{release} \ Obsoletes: %{name}-system-lm32-core <= %{epoch}:%{version}-%{release} \ Obsoletes: %{name}-system-moxie <= %{epoch}:%{version}-%{release} \ Obsoletes: %{name}-system-moxie-core <= %{epoch}:%{version}-%{release} \ Obsoletes: %{name}-system-nios2 <= %{epoch}:%{version}-%{release} \ Obsoletes: %{name}-system-nios2-core <= %{epoch}:%{version}-%{release} \ Obsoletes: %{name}-system-unicore32 <= %{epoch}:%{version}-%{release} \ Obsoletes: %{name}-system-unicore32-core <= %{epoch}:%{version}-%{release} \ Obsoletes: sgabios-bin <= 1:0.20180715git-10.fc38 # Release candidate version tracking # global rcver rc4 %if 0%{?rcver:1} %global rcrel .%{rcver} %global rcstr -%{rcver} %endif # To prevent rpmdev-bumpspec breakage %global baserelease 1 Summary: QEMU is a FAST! processor emulator Name: qemu Version: 9.1.2 Release: %{baserelease}%{?rcrel}%{?dist} Epoch: 2 License: %{shrink: Apache-2.0 AND BSD-2-Clause AND BSD-3-Clause AND FSFAP AND GPL-1.0-or-later AND GPL-2.0-only AND GPL-2.0-or-later AND GPL-2.0-or-later WITH GCC-exception-2.0 AND LGPL-2.0-only AND LGPL-2.0-or-later AND LGPL-2.1-only AND LGPL-2.1-or-later AND MIT AND LicenseRef-Fedora-Public-Domain AND CC-BY-3.0 } URL: http://www.qemu.org/ %global dlurl https://download.qemu.org Source0: %{dlurl}/%{name}-%{version}%{?rcstr}.tar.xz Source1: %{dlurl}/%{name}-%{version}%{?rcstr}.tar.xz.sig Source2: gpgkey-CEACC9E15534EBABB82D3FA03353C9CEF108B584.gpg # qemu 9.0.0 errors with: # RPM build errors: # Missing build-id in /tmp/rpmbuild/BUILDROOT/qemu-9.0.0-1.rc2.fc41.x86_64/usr/share/qemu/hppa-firmware.img # Missing build-id in /tmp/rpmbuild/BUILDROOT/qemu-9.0.0-1.rc2.fc41.x86_64/usr/share/qemu/hppa-firmware64.img # Generating build-id links failed %global _missing_build_ids_terminate_build 0 Source10: qemu-guest-agent.service Source11: 99-qemu-guest-agent.rules Source12: bridge.conf Source17: qemu-ga.sysconfig Source21: 95-kvm-memlock.conf Source26: vhost.conf Source27: kvm.conf Source30: kvm-s390x.conf Source31: kvm-x86.conf Source36: README.tests # Skip failing test in copr # https://gitlab.com/qemu-project/qemu/-/issues/2541 Patch: 0001-Disable-9p-local-tests-that-fail-on-copr-aarch64.patch # Fix compat with new glibc (not upstream yet) Patch: schedattr.patch # Openat2 support (upstream commit 9651cea) Patch: 0001-linux-user-add-openat2-support-in-linux-user.patch # linux-user-cris support for openat2, can be removed once "cris" is # removed (after v9.1.0) Patch: 0001-linux-user-guard-openat2-with-if-defined-TARGET_NR_o.patch BuildRequires: gnupg2 BuildRequires: meson >= %{meson_version} BuildRequires: bison BuildRequires: flex BuildRequires: zlib-devel BuildRequires: glib2-devel BuildRequires: gnutls-devel BuildRequires: libselinux-devel BuildRequires: cyrus-sasl-devel BuildRequires: libaio-devel BuildRequires: python3-devel BuildRequires: libiscsi-devel BuildRequires: libattr-devel BuildRequires: libusbx-devel >= %{libusbx_version} %if %{have_usbredir} BuildRequires: usbredir-devel >= %{usbredir_version} %endif BuildRequires: python3-sphinx BuildRequires: python3-sphinx_rtd_theme BuildRequires: libseccomp-devel >= %{libseccomp_version} # For network block driver BuildRequires: libcurl-devel BuildRequires: libssh-devel %if %{have_block_rbd} BuildRequires: librbd-devel %endif # We need both because the 'stap' binary is probed for by configure BuildRequires: systemtap BuildRequires: systemtap-sdt-devel BuildRequires: /usr/bin/dtrace # For VNC PNG support BuildRequires: libpng-devel # For virtiofs BuildRequires: libcap-ng-devel # Hard requirement for version >= 1.3 BuildRequires: pixman-devel # For rdma %if %{have_librdma} BuildRequires: rdma-core-devel %endif %if %{have_fdt} BuildRequires: libfdt-devel >= %{libfdt_version} %endif # For compressed guest memory dumps BuildRequires: lzo-devel snappy-devel # For NUMA memory binding %if %{have_numactl} BuildRequires: numactl-devel %endif # qemu-pr-helper multipath support (requires libudev too) BuildRequires: device-mapper-multipath-devel BuildRequires: systemd-devel %if %{have_pmem} BuildRequires: libpmem-devel %endif # qemu-keymap BuildRequires: pkgconfig(xkbcommon) %if %{have_opengl} BuildRequires: pkgconfig(epoxy) BuildRequires: pkgconfig(libdrm) BuildRequires: pkgconfig(gbm) %endif BuildRequires: perl-Test-Harness BuildRequires: libslirp-devel BuildRequires: libbpf-devel >= 1.0.0 %if %{have_libblkio} BuildRequires: libblkio-devel %endif # Fedora specific %if "%{toolchain}" == "clang" BuildRequires: clang %else BuildRequires: gcc %endif BuildRequires: make # For autosetup git_am BuildRequires: git # -display sdl support BuildRequires: SDL2-devel # pulseaudio audio output BuildRequires: pulseaudio-libs-devel # alsa audio output BuildRequires: alsa-lib-devel %if %{have_block_nfs} # NFS drive support BuildRequires: libnfs-devel %endif # curses display backend BuildRequires: ncurses-devel %if %{have_spice} # spice graphics support BuildRequires: spice-protocol BuildRequires: spice-server-devel %endif # VNC JPEG support BuildRequires: libjpeg-devel # Braille device support BuildRequires: brlapi-devel %if %{have_block_gluster} # gluster block driver BuildRequires: glusterfs-api-devel %endif # GTK frontend BuildRequires: gtk3-devel BuildRequires: vte291-devel # GTK translations BuildRequires: gettext %if %{have_xen} # Xen support BuildRequires: xen-devel %endif # reading bzip2 compressed dmg images BuildRequires: bzip2-devel # TLS test suite BuildRequires: libtasn1-devel %if %{have_libcacard} # smartcard device BuildRequires: libcacard-devel %endif %if %{have_virgl} # virgl 3d support BuildRequires: virglrenderer-devel %endif # preferred disassembler for TCG BuildRequires: capstone-devel # qemu-ga BuildRequires: libudev-devel # qauth infrastructure BuildRequires: pam-devel %if %{have_liburing} # liburing support. Library isn't built for arm BuildRequires: liburing-devel %endif # zstd compression support BuildRequires: libzstd-devel # `hostname` used by test suite BuildRequires: hostname # nvdimm dax BuildRequires: daxctl-devel # fuse block device BuildRequires: fuse-devel %if %{have_jack} # jack audio driver BuildRequires: (pipewire-jack-audio-connection-kit-devel or jack-audio-connection-kit-devel) %endif BuildRequires: fuse3-devel %if %{have_sdl_image} BuildRequires: SDL2_image-devel %endif %if %{have_gvnc_devel} # Used by vnc-display-test BuildRequires: pkgconfig(gvnc-1.0) %endif %if 0%{?fedora} # Used by pipewire audio backend BuildRequires: pipewire-devel %endif # Used by cryptodev-backend-lkcf BuildRequires: keyutils-libs-devel # Used by net AF_XDP BuildRequires: libxdp-devel # used by virtio-gpu-rutabaga %if %{have_rutabaga_gfx} BuildRequires: rutabaga-gfx-ffi-devel %endif %if 0%{?rhel} <= 9 # Builds on centos-stream 9 require python-tomli BuildRequires: python-tomli %endif %if %{user_static} BuildRequires: glibc-static BuildRequires: glib2-static BuildRequires: zlib-static %if 0%{?fedora} >= 37 # -latomic added by GLib 2.81.0, 2024-06-28 BuildRequires: libatomic-static BuildRequires: pcre2-static %else BuildRequires: pcre-static %endif %endif # Requires for the Fedora 'qemu' metapackage Requires: %{name}-user = %{epoch}:%{version}-%{release} Requires: %{name}-system-aarch64 = %{epoch}:%{version}-%{release} Requires: %{name}-system-alpha = %{epoch}:%{version}-%{release} Requires: %{name}-system-arm = %{epoch}:%{version}-%{release} Requires: %{name}-system-avr = %{epoch}:%{version}-%{release} Requires: %{name}-system-cris = %{epoch}:%{version}-%{release} Requires: %{name}-system-loongarch64 = %{epoch}:%{version}-%{release} Requires: %{name}-system-m68k = %{epoch}:%{version}-%{release} Requires: %{name}-system-microblaze = %{epoch}:%{version}-%{release} Requires: %{name}-system-mips = %{epoch}:%{version}-%{release} Requires: %{name}-system-or1k = %{epoch}:%{version}-%{release} Requires: %{name}-system-ppc = %{epoch}:%{version}-%{release} Requires: %{name}-system-riscv = %{epoch}:%{version}-%{release} Requires: %{name}-system-rx = %{epoch}:%{version}-%{release} Requires: %{name}-system-s390x = %{epoch}:%{version}-%{release} Requires: %{name}-system-sh4 = %{epoch}:%{version}-%{release} Requires: %{name}-system-sparc = %{epoch}:%{version}-%{release} Requires: %{name}-system-tricore = %{epoch}:%{version}-%{release} Requires: %{name}-system-x86 = %{epoch}:%{version}-%{release} Requires: %{name}-system-xtensa = %{epoch}:%{version}-%{release} Requires: %{name}-img = %{epoch}:%{version}-%{release} Requires: %{name}-tools = %{epoch}:%{version}-%{release} %description %{name} is an open source virtualizer that provides hardware emulation for the KVM hypervisor. %{name} acts as a virtual machine monitor together with the KVM kernel modules, and emulates the hardware for a full system such as a PC and its associated peripherals. %package common Summary: QEMU common files needed by all QEMU targets Requires(post): /usr/bin/getent Requires(post): /usr/sbin/groupadd Requires(post): /usr/sbin/useradd Requires(post): systemd-units Requires(preun): systemd-units Requires(postun): systemd-units %{obsoletes_some_modules} Requires: ipxe-roms-qemu >= %{ipxe_version} %description common %{name} is an open source virtualizer that provides hardware emulation for the KVM hypervisor. This package provides documentation and auxiliary programs used with %{name}. %package docs Summary: %{name} documentation BuildArch: noarch %description docs %{name}-docs provides documentation files regarding %{name}. %package -n qemu-img Summary: QEMU command line tool for manipulating disk images %description -n qemu-img This package provides a command line tool for manipulating disk images. %package -n qemu-guest-agent Summary: QEMU guest agent Requires(post): systemd-units Requires(preun): systemd-units Requires(postun): systemd-units %description -n qemu-guest-agent %{name} is an open source virtualizer that provides hardware emulation for the KVM hypervisor. This package provides an agent to run inside guests, which communicates with the host over a virtio-serial channel named "org.qemu.guest_agent.0" This package does not need to be installed on the host OS. %package tools Summary: %{name} support tools %description tools %{name}-tools provides various tools related to %{name} usage. %package -n qemu-pr-helper Summary: qemu-pr-helper utility for %{name} %description -n qemu-pr-helper This package provides the qemu-pr-helper utility that is required for certain SCSI features. %package tests Summary: tests for the %{name} package Requires: %{name} = %{epoch}:%{version}-%{release} %define testsdir %{_libdir}/%{name}/tests-src %description tests The %{name}-tests rpm contains tests that can be used to verify the functionality of the installed %{name} package Install this package if you want access to the avocado_qemu tests, or qemu-iotests. %if %{have_libblkio} %package block-blkio Summary: QEMU blkio block driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description block-blkio This package provides the additional blkio block driver for QEMU. Install this package if you want to access disks over vhost-user-blk, vdpa-blk, and other transports using the libblkio library. %endif %package block-curl Summary: QEMU CURL block driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description block-curl This package provides the additional CURL block driver for QEMU. Install this package if you want to access remote disks over http, https, ftp and other transports provided by the CURL library. %package block-iscsi Summary: QEMU iSCSI block driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description block-iscsi This package provides the additional iSCSI block driver for QEMU. Install this package if you want to access iSCSI volumes. %if %{have_block_rbd} %package block-rbd Summary: QEMU Ceph/RBD block driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description block-rbd This package provides the additional Ceph/RBD block driver for QEMU. Install this package if you want to access remote Ceph volumes using the rbd protocol. %endif %package block-ssh Summary: QEMU SSH block driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description block-ssh This package provides the additional SSH block driver for QEMU. Install this package if you want to access remote disks using the Secure Shell (SSH) protocol. %if %{have_opengl} %package ui-opengl Summary: QEMU opengl support Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} Requires: mesa-libGL Requires: mesa-libEGL Requires: mesa-dri-drivers %description ui-opengl This package provides opengl support. %endif # Fedora specific %package block-dmg Summary: QEMU block driver for DMG disk images Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description block-dmg This package provides the additional DMG block driver for QEMU. Install this package if you want to open '.dmg' files. %if %{have_block_gluster} %package block-gluster Summary: QEMU Gluster block driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description block-gluster This package provides the additional Gluster block driver for QEMU. Install this package if you want to access remote Gluster storage. %endif %if %{have_block_nfs} %package block-nfs Summary: QEMU NFS block driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description block-nfs This package provides the additional NFS block driver for QEMU. Install this package if you want to access remote NFS storage. %endif %package audio-alsa Summary: QEMU ALSA audio driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description audio-alsa This package provides the additional ALSA audio driver for QEMU. %if %{have_dbus_display} %package audio-dbus Summary: QEMU D-Bus audio driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description audio-dbus This package provides the additional D-Bus audio driver for QEMU. %endif %package audio-oss Summary: QEMU OSS audio driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description audio-oss This package provides the additional OSS audio driver for QEMU. %package audio-pa Summary: QEMU PulseAudio audio driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description audio-pa This package provides the additional PulseAudio audio driver for QEMU. %if 0%{?fedora} %package audio-pipewire Summary: QEMU Pipewire audio driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description audio-pipewire This package provides the additional Pipewire audio driver for QEMU. %endif %package audio-sdl Summary: QEMU SDL audio driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description audio-sdl This package provides the additional SDL audio driver for QEMU. %if %{have_jack} %package audio-jack Summary: QEMU Jack audio driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description audio-jack This package provides the additional Jack audio driver for QEMU. %endif %package ui-curses Summary: QEMU curses UI driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description ui-curses This package provides the additional curses UI for QEMU. %if %{have_dbus_display} %package ui-dbus Summary: QEMU D-Bus UI driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description ui-dbus This package provides the additional D-Bus UI for QEMU. %endif %package ui-gtk Summary: QEMU GTK UI driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} Requires: %{name}-ui-opengl%{?_isa} = %{epoch}:%{version}-%{release} %description ui-gtk This package provides the additional GTK UI for QEMU. %package ui-sdl Summary: QEMU SDL UI driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} Requires: %{name}-ui-opengl%{?_isa} = %{epoch}:%{version}-%{release} %description ui-sdl This package provides the additional SDL UI for QEMU. %package ui-egl-headless Summary: QEMU EGL headless driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} Requires: %{name}-ui-opengl%{?_isa} = %{epoch}:%{version}-%{release} %description ui-egl-headless This package provides the additional egl-headless UI for QEMU. %package char-baum Summary: QEMU Baum chardev driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description char-baum This package provides the Baum chardev driver for QEMU. %package device-display-virtio-gpu Summary: QEMU virtio-gpu display device Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description device-display-virtio-gpu This package provides the virtio-gpu display device for QEMU. %if %{have_virgl} %package device-display-virtio-gpu-gl Summary: QEMU virtio-gpu-gl display device Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} Requires: %{name}-device-display-virtio-gpu%{?_isa} = %{epoch}:%{version}-%{release} %description device-display-virtio-gpu-gl This package provides the virtio-gpu-gl display device for QEMU. %endif %if %{have_rutabaga_gfx} %package device-display-virtio-gpu-rutabaga Summary: QEMU virtio-gpu-rutabaga display device Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} Requires: %{name}-device-display-virtio-gpu%{?_isa} = %{epoch}:%{version}-%{release} %description device-display-virtio-gpu-rutabaga This package provides the virtio-gpu-rutabaga display device for QEMU. %endif %package device-display-virtio-gpu-pci Summary: QEMU virtio-gpu-pci display device Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} Requires: %{name}-device-display-virtio-gpu%{?_isa} = %{epoch}:%{version}-%{release} %description device-display-virtio-gpu-pci This package provides the virtio-gpu-pci display device for QEMU. %if %{have_virgl} %package device-display-virtio-gpu-pci-gl Summary: QEMU virtio-gpu-pci-gl display device Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} Requires: %{name}-device-display-virtio-gpu-pci%{?_isa} = %{epoch}:%{version}-%{release} Requires: %{name}-device-display-virtio-gpu-gl%{?_isa} = %{epoch}:%{version}-%{release} %description device-display-virtio-gpu-pci-gl This package provides the virtio-gpu-pci-gl display device for QEMU. %endif %if %{have_rutabaga_gfx} %package device-display-virtio-gpu-pci-rutabaga Summary: QEMU virtio-gpu-pci-rutabaga display device Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} Requires: %{name}-device-display-virtio-gpu-pci%{?_isa} = %{epoch}:%{version}-%{release} %description device-display-virtio-gpu-pci-rutabaga This package provides the virtio-gpu-pci-rutabaga display device for QEMU. %endif %package device-display-virtio-gpu-ccw Summary: QEMU virtio-gpu-ccw display device Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} Requires: %{name}-device-display-virtio-gpu%{?_isa} = %{epoch}:%{version}-%{release} %description device-display-virtio-gpu-ccw This package provides the virtio-gpu-ccw display device for QEMU. %package device-display-virtio-vga Summary: QEMU virtio-vga display device Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} Requires: %{name}-device-display-virtio-gpu%{?_isa} = %{epoch}:%{version}-%{release} %description device-display-virtio-vga This package provides the virtio-vga display device for QEMU. %if %{have_virgl} %package device-display-virtio-vga-gl Summary: QEMU virtio-vga-gl display device Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} Requires: %{name}-device-display-virtio-vga%{?_isa} = %{epoch}:%{version}-%{release} %description device-display-virtio-vga-gl This package provides the virtio-vga-gl display device for QEMU. %endif %if %{have_rutabaga_gfx} %package device-display-virtio-vga-rutabaga Summary: QEMU virtio-vga-rutabaga display device Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} Requires: %{name}-device-display-virtio-vga%{?_isa} = %{epoch}:%{version}-%{release} %description device-display-virtio-vga-rutabaga This package provides the virtio-vga-rutabaga display device for QEMU. %endif %package device-usb-host Summary: QEMU usb host device Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description device-usb-host This package provides the USB pass through driver for QEMU. %package device-usb-redirect Summary: QEMU usbredir device Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description device-usb-redirect This package provides the usbredir device for QEMU. %if %{have_libcacard} %package device-usb-smartcard Summary: QEMU USB smartcard device Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description device-usb-smartcard This package provides the USB smartcard device for QEMU. %endif %if %{have_virgl} %package device-display-vhost-user-gpu Summary: QEMU QXL display device Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description device-display-vhost-user-gpu This package provides the vhost-user-gpu display device for QEMU. %endif %if %{have_spice} %package ui-spice-core Summary: QEMU spice-core UI driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} Requires: %{name}-ui-opengl%{?_isa} = %{epoch}:%{version}-%{release} %description ui-spice-core This package provides the additional spice-core UI for QEMU. %package ui-spice-app Summary: QEMU spice-app UI driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} Requires: %{name}-ui-spice-core%{?_isa} = %{epoch}:%{version}-%{release} Requires: %{name}-char-spice%{?_isa} = %{epoch}:%{version}-%{release} %description ui-spice-app This package provides the additional spice-app UI for QEMU. %package device-display-qxl Summary: QEMU QXL display device Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} Requires: %{name}-ui-spice-core%{?_isa} = %{epoch}:%{version}-%{release} %description device-display-qxl This package provides the QXL display device for QEMU. %package char-spice Summary: QEMU spice chardev driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} Requires: %{name}-ui-spice-core%{?_isa} = %{epoch}:%{version}-%{release} %description char-spice This package provides the spice chardev driver for QEMU. %package audio-spice Summary: QEMU spice audio driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} Requires: %{name}-ui-spice-core%{?_isa} = %{epoch}:%{version}-%{release} %description audio-spice This package provides the spice audio driver for QEMU. %endif %if %{have_kvm} %package kvm Summary: QEMU metapackage for KVM support Requires: qemu-%{kvm_package} = %{epoch}:%{version}-%{release} %description kvm This is a meta-package that provides a qemu-system- package for native architectures where kvm can be enabled. For example, in an x86 system, this will install qemu-system-x86 %package kvm-core Summary: QEMU metapackage for KVM support Requires: qemu-%{kvm_package}-core = %{epoch}:%{version}-%{release} %description kvm-core This is a meta-package that provides a qemu-system--core package for native architectures where kvm can be enabled. For example, in an x86 system, this will install qemu-system-x86-core %endif %package user Summary: QEMU user mode emulation of qemu targets Requires: %{name}-common = %{epoch}:%{version}-%{release} %description user This package provides the user mode emulation of qemu targets %package user-binfmt Summary: QEMU user mode emulation of qemu targets Requires: %{name}-user = %{epoch}:%{version}-%{release} Requires(post): systemd-units Requires(postun): systemd-units # qemu-user-binfmt + qemu-user-static both provide binfmt rules # Temporarily disable to get fedora CI working. Re-enable # once this CI issue let's us deal with subpackage conflicts: # https://pagure.io/fedora-ci/general/issue/184 #Conflicts: qemu-user-static %description user-binfmt This package provides the user mode emulation of qemu targets %if %{user_static} %package user-static Summary: QEMU user mode emulation of qemu targets static build Requires(post): systemd-units Requires(postun): systemd-units # qemu-user-binfmt + qemu-user-static both provide binfmt rules # Temporarily disable to get fedora CI working. Re-enable # once this CI issue let's us deal with subpackage conflicts: # https://pagure.io/fedora-ci/general/issue/184 #Conflicts: qemu-user-binfmt #Provides: qemu-user-binfmt Requires: qemu-user-static-aarch64 Requires: qemu-user-static-alpha Requires: qemu-user-static-arm Requires: qemu-user-static-cris Requires: qemu-user-static-hexagon Requires: qemu-user-static-hppa Requires: qemu-user-static-loongarch64 Requires: qemu-user-static-m68k Requires: qemu-user-static-microblaze Requires: qemu-user-static-mips Requires: qemu-user-static-or1k Requires: qemu-user-static-ppc Requires: qemu-user-static-riscv Requires: qemu-user-static-s390x Requires: qemu-user-static-sh4 Requires: qemu-user-static-sparc Requires: qemu-user-static-x86 Requires: qemu-user-static-xtensa Obsoletes: qemu-user-static-nios2 <= %{epoch}:%{version}-%{release} %description user-static This package provides the user mode emulation of qemu targets built as static binaries %package user-static-aarch64 Summary: QEMU user mode emulation of aarch64 qemu targets static build %description user-static-aarch64 This package provides the aarch64 user mode emulation of qemu targets built as static binaries %package user-static-alpha Summary: QEMU user mode emulation of alpha qemu targets static build %description user-static-alpha This package provides the alpha user mode emulation of qemu targets built as static binaries %package user-static-arm Summary: QEMU user mode emulation of arm qemu targets static build %description user-static-arm This package provides the arm user mode emulation of qemu targets built as static binaries %package user-static-cris Summary: QEMU user mode emulation of cris qemu targets static build %description user-static-cris This package provides the cris user mode emulation of qemu targets built as static binaries %package user-static-hexagon Summary: QEMU user mode emulation of hexagon qemu targets static build %description user-static-hexagon This package provides the hexagon user mode emulation of qemu targets built as static binaries %package user-static-hppa Summary: QEMU user mode emulation of hppa qemu targets static build %description user-static-hppa This package provides the hppa user mode emulation of qemu targets built as static binaries %package user-static-loongarch64 Summary: QEMU user mode emulation of loongarch64 qemu targets static build %description user-static-loongarch64 This package provides the loongarch64 user mode emulation of qemu targets built as static binaries %package user-static-m68k Summary: QEMU user mode emulation of m68k qemu targets static build %description user-static-m68k This package provides the m68k user mode emulation of qemu targets built as static binaries %package user-static-microblaze Summary: QEMU user mode emulation of microblaze qemu targets static build %description user-static-microblaze This package provides the microblaze user mode emulation of qemu targets built as static binaries %package user-static-mips Summary: QEMU user mode emulation of mips qemu targets static build %description user-static-mips This package provides the mips user mode emulation of qemu targets built as static binaries %package user-static-or1k Summary: QEMU user mode emulation of or1k qemu targets static build %description user-static-or1k This package provides the or1k user mode emulation of qemu targets built as static binaries %package user-static-ppc Summary: QEMU user mode emulation of ppc qemu targets static build %description user-static-ppc This package provides the ppc user mode emulation of qemu targets built as static binaries %package user-static-riscv Summary: QEMU user mode emulation of riscv qemu targets static build %description user-static-riscv This package provides the riscv user mode emulation of qemu targets built as static binaries %package user-static-s390x Summary: QEMU user mode emulation of s390x qemu targets static build %description user-static-s390x This package provides the s390x user mode emulation of qemu targets built as static binaries %package user-static-sh4 Summary: QEMU user mode emulation of sh4 qemu targets static build %description user-static-sh4 This package provides the sh4 user mode emulation of qemu targets built as static binaries %endif %package user-static-sparc Summary: QEMU user mode emulation of sparc qemu targets static build %description user-static-sparc This package provides the sparc user mode emulation of qemu targets built as static binaries %package user-static-x86 Summary: QEMU user mode emulation of x86 qemu targets static build %description user-static-x86 This package provides the x86 user mode emulation of qemu targets built as static binaries %package user-static-xtensa Summary: QEMU user mode emulation of xtensa qemu targets static build %description user-static-xtensa This package provides the xtensa user mode emulation of qemu targets built as static binaries %package system-aarch64 Summary: QEMU system emulator for AArch64 Requires: %{name}-system-aarch64-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-aarch64 This package provides the QEMU system emulator for AArch64. %package system-aarch64-core Summary: QEMU system emulator for AArch64 Requires: %{name}-common = %{epoch}:%{version}-%{release} %if %{have_edk2} Requires: edk2-aarch64 %endif %description system-aarch64-core This package provides the QEMU system emulator for AArch64. %package system-alpha Summary: QEMU system emulator for Alpha Requires: %{name}-system-alpha-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-alpha This package provides the QEMU system emulator for Alpha systems. %package system-alpha-core Summary: QEMU system emulator for Alpha Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-alpha-core This package provides the QEMU system emulator for Alpha systems. %package system-arm Summary: QEMU system emulator for ARM Requires: %{name}-system-arm-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-arm This package provides the QEMU system emulator for ARM systems. %package system-arm-core Summary: QEMU system emulator for ARM Requires: %{name}-common = %{epoch}:%{version}-%{release} %if %{have_edk2} Requires: edk2-arm %endif %description system-arm-core This package provides the QEMU system emulator for ARM boards. %package system-avr Summary: QEMU system emulator for AVR Requires: %{name}-system-avr-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-avr This package provides the QEMU system emulator for AVR systems. %package system-avr-core Summary: QEMU system emulator for AVR Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-avr-core This package provides the QEMU system emulator for AVR systems. %package system-cris Summary: QEMU system emulator for CRIS Requires: %{name}-system-cris-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-cris This package provides the system emulator for CRIS systems. %package system-cris-core Summary: QEMU system emulator for CRIS Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-cris-core This package provides the system emulator for CRIS boards. %package system-hppa Summary: QEMU system emulator for HPPA Requires: %{name}-system-hppa-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-hppa This package provides the QEMU system emulator for HPPA. %package system-hppa-core Summary: QEMU system emulator for hppa Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-hppa-core This package provides the QEMU system emulator for HPPA. %package system-loongarch64 Summary: QEMU system emulator for LoongArch (LA64) Requires: %{name}-system-loongarch64-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-loongarch64 This package provides the QEMU system emulator for Loongson boards. %package system-loongarch64-core Summary: QEMU system emulator for LoongArch (LA64) Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-loongarch64-core This package provides the QEMU system emulator for Loongson boards. %package system-m68k Summary: QEMU system emulator for ColdFire (m68k) Requires: %{name}-system-m68k-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-m68k This package provides the QEMU system emulator for ColdFire boards. %package system-m68k-core Summary: QEMU system emulator for ColdFire (m68k) Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-m68k-core This package provides the QEMU system emulator for ColdFire boards. %package system-microblaze Summary: QEMU system emulator for Microblaze Requires: %{name}-system-microblaze-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-microblaze This package provides the QEMU system emulator for Microblaze boards. %package system-microblaze-core Summary: QEMU system emulator for Microblaze Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-microblaze-core This package provides the QEMU system emulator for Microblaze boards. %package system-mips Summary: QEMU system emulator for MIPS Requires: %{name}-system-mips-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-mips This package provides the QEMU system emulator for MIPS systems. %package system-mips-core Summary: QEMU system emulator for MIPS Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-mips-core This package provides the QEMU system emulator for MIPS systems. %package system-or1k Summary: QEMU system emulator for OpenRisc32 Requires: %{name}-system-or1k-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-or1k This package provides the QEMU system emulator for OpenRisc32 boards. %package system-or1k-core Summary: QEMU system emulator for OpenRisc32 Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-or1k-core This package provides the QEMU system emulator for OpenRisc32 boards. %package system-ppc Summary: QEMU system emulator for PPC Requires: %{name}-system-ppc-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-ppc This package provides the QEMU system emulator for PPC and PPC64 systems. %package system-ppc-core Summary: QEMU system emulator for PPC Requires: %{name}-common = %{epoch}:%{version}-%{release} Requires: openbios Requires: SLOF Requires: seavgabios-bin %description system-ppc-core This package provides the QEMU system emulator for PPC and PPC64 systems. %package system-riscv Summary: QEMU system emulator for RISC-V Requires: %{name}-system-riscv-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-riscv This package provides the QEMU system emulator for RISC-V systems. %package system-riscv-core Summary: QEMU system emulator for RISC-V Requires: %{name}-common = %{epoch}:%{version}-%{release} %if %{have_edk2} Requires: edk2-riscv64 %endif %description system-riscv-core This package provides the QEMU system emulator for RISC-V systems. %package system-rx Summary: QEMU system emulator for RX Requires: %{name}-system-rx-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-rx This package provides the QEMU system emulator for RX systems. %package system-rx-core Summary: QEMU system emulator for RX Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-rx-core This package provides the QEMU system emulator for RX systems. %package system-s390x Summary: QEMU system emulator for S390 Requires: %{name}-system-s390x-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-s390x This package provides the QEMU system emulator for S390 systems. %package system-s390x-core Summary: QEMU system emulator for S390 Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-s390x-core This package provides the QEMU system emulator for S390 systems. %package system-sh4 Summary: QEMU system emulator for SH4 Requires: %{name}-system-sh4-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-sh4 This package provides the QEMU system emulator for SH4 boards. %package system-sh4-core Summary: QEMU system emulator for SH4 Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-sh4-core This package provides the QEMU system emulator for SH4 boards. %package system-sparc Summary: QEMU system emulator for SPARC Requires: %{name}-system-sparc-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-sparc This package provides the QEMU system emulator for SPARC and SPARC64 systems. %package system-sparc-core Summary: QEMU system emulator for SPARC Requires: %{name}-common = %{epoch}:%{version}-%{release} Requires: openbios %description system-sparc-core This package provides the QEMU system emulator for SPARC and SPARC64 systems. %package system-tricore Summary: QEMU system emulator for tricore Requires: %{name}-system-tricore-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-tricore This package provides the QEMU system emulator for Tricore. %package system-tricore-core Summary: QEMU system emulator for tricore Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-tricore-core This package provides the QEMU system emulator for Tricore. %package system-x86 Summary: QEMU system emulator for x86 Requires: %{name}-system-x86-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-x86 This package provides the QEMU system emulator for x86. When being run in a x86 machine that supports it, this package also provides the KVM virtualization platform. %package system-x86-core Summary: QEMU system emulator for x86 Requires: %{name}-common = %{epoch}:%{version}-%{release} Requires: seabios-bin Requires: seavgabios-bin %if %{have_edk2} Requires: edk2-ovmf %endif %description system-x86-core This package provides the QEMU system emulator for x86. When being run in a x86 machine that supports it, this package also provides the KVM virtualization platform. %package system-xtensa Summary: QEMU system emulator for Xtensa Requires: %{name}-system-xtensa-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-xtensa This package provides the QEMU system emulator for Xtensa boards. %package system-xtensa-core Summary: QEMU system emulator for Xtensa Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-xtensa-core This package provides the QEMU system emulator for Xtensa boards. %prep gpgv2 --keyring %{SOURCE2} %{SOURCE1} %{SOURCE0} %autosetup -n qemu-%{version}%{?rcstr} -S git_am %global qemu_kvm_build qemu_kvm_build mkdir -p %{qemu_kvm_build} %global static_builddir static_builddir mkdir -p %{static_builddir} %build %define disable_everything \\\ --audio-drv-list= \\\ --disable-af-xdp \\\ --disable-alsa \\\ --disable-attr \\\ --disable-auth-pam \\\ --disable-avx2 \\\ --disable-avx512bw \\\ --disable-blkio \\\ --disable-block-drv-whitelist-in-tools \\\ --disable-bochs \\\ --disable-bpf \\\ --disable-brlapi \\\ --disable-bsd-user \\\ --disable-bzip2 \\\ --disable-cap-ng \\\ --disable-capstone \\\ --disable-cfi \\\ --disable-cfi-debug \\\ --disable-cloop \\\ --disable-cocoa \\\ --disable-colo-proxy \\\ --disable-coreaudio \\\ --disable-coroutine-pool \\\ --disable-crypto-afalg \\\ --disable-curl \\\ --disable-curses \\\ --disable-dbus-display \\\ --disable-debug-graph-lock \\\ --disable-debug-info \\\ --disable-debug-mutex \\\ --disable-debug-remap \\\ --disable-debug-tcg \\\ --disable-dmg \\\ --disable-docs \\\ --disable-download \\\ --disable-dsound \\\ --disable-fdt \\\ --disable-fuse \\\ --disable-fuse-lseek \\\ --disable-gcrypt \\\ --disable-gettext \\\ --disable-gio \\\ --disable-glusterfs \\\ --disable-gnutls \\\ --disable-gtk \\\ --disable-gtk-clipboard \\\ --disable-guest-agent \\\ --disable-guest-agent-msi \\\ --disable-hv-balloon \\\ --disable-hvf \\\ --disable-iconv \\\ --disable-jack \\\ --disable-kvm \\\ --disable-l2tpv3 \\\ --disable-libdaxctl \\\ --disable-libdw \\\ --disable-libkeyutils \\\ --disable-libiscsi \\\ --disable-libnfs \\\ --disable-libpmem \\\ --disable-libssh \\\ --disable-libudev \\\ --disable-libusb \\\ --disable-linux-aio \\\ --disable-linux-io-uring \\\ --disable-linux-user \\\ --disable-lto \\\ --disable-lzfse \\\ --disable-lzo \\\ --disable-malloc-trim \\\ --disable-membarrier \\\ --disable-modules \\\ --disable-module-upgrades \\\ --disable-mpath \\\ --disable-multiprocess \\\ --disable-netmap \\\ --disable-nettle \\\ --disable-numa \\\ --disable-nvmm \\\ --disable-opengl \\\ --disable-oss \\\ --disable-pa \\\ --disable-parallels \\\ --disable-pie \\\ --disable-pipewire \\\ --disable-pixman \\\ --disable-plugins \\\ --disable-qcow1 \\\ --disable-qed \\\ --disable-qom-cast-debug \\\ --disable-qpl \\\ --disable-rbd \\\ --disable-rdma \\\ --disable-relocatable \\\ --disable-replication \\\ --disable-rutabaga-gfx \\\ --disable-rng-none \\\ --disable-safe-stack \\\ --disable-sanitizers \\\ --disable-sdl \\\ --disable-sdl-image \\\ --disable-seccomp \\\ --disable-selinux \\\ --disable-slirp \\\ --disable-slirp-smbd \\\ --disable-smartcard \\\ --disable-snappy \\\ --disable-sndio \\\ --disable-sparse \\\ --disable-spice \\\ --disable-spice-protocol \\\ --disable-strip \\\ --disable-system \\\ --disable-tcg \\\ --disable-tools \\\ --disable-tpm \\\ --disable-tsan \\\ --disable-uadk \\\ --disable-u2f \\\ --disable-usb-redir \\\ --disable-user \\\ --disable-vpc \\\ --disable-vde \\\ --disable-vdi \\\ --disable-vfio-user-server \\\ --disable-vhdx \\\ --disable-vhost-crypto \\\ --disable-vhost-kernel \\\ --disable-vhost-net \\\ --disable-vhost-user \\\ --disable-vhost-user-blk-server \\\ --disable-vhost-vdpa \\\ --disable-virglrenderer \\\ --disable-virtfs \\\ --disable-vnc \\\ --disable-vnc-jpeg \\\ --disable-png \\\ --disable-vnc-sasl \\\ --disable-vte \\\ --disable-vvfat \\\ --disable-werror \\\ --disable-whpx \\\ --disable-xen \\\ --disable-xen-pci-passthrough \\\ --disable-xkbcommon \\\ --disable-zstd \\\ --without-default-devices run_configure() { ../configure \ --cc=%{__cc} \ --cxx=/bin/false \ --prefix="%{_prefix}" \ --libdir="%{_libdir}" \ --datadir="%{_datadir}" \ --sysconfdir="%{_sysconfdir}" \ --interp-prefix=%{_prefix}/qemu-%M \ --localstatedir="%{_localstatedir}" \ --docdir="%{_docdir}" \ --libexecdir="%{_libexecdir}" \ --extra-ldflags="%{build_ldflags}" \ %ifnarch %{arm} --extra-cflags="%{optflags}" \ %else --extra-cflags="%{optflags} -DSTAP_SDT_ARG_CONSTRAINT=g" \ %endif --with-pkgversion="%{name}-%{version}-%{release}" \ --with-suffix="%{name}" \ --firmwarepath="%firmwaredirs" \ --enable-trace-backends=dtrace \ --with-coroutine=ucontext \ --tls-priority=@QEMU,SYSTEM \ %{disable_everything} \ "$@" \ || ( cat config.log ; exit 1 ) echo "config-host.mak contents:" echo "===" cat config-host.mak echo "===" } pushd %{qemu_kvm_build} run_configure \ %if %{defined target_list} --target-list="%{target_list}" \ %endif %if %{defined block_drivers_rw_list} --block-drv-rw-whitelist=%{block_drivers_rw_list} \ %endif %if %{defined block_drivers_ro_list} --block-drv-ro-whitelist=%{block_drivers_ro_list} \ %endif --enable-af-xdp \ --enable-alsa \ --enable-attr \ %ifarch %{ix86} x86_64 --enable-avx2 \ --enable-avx512bw \ %endif %if %{have_libblkio} --enable-blkio \ %endif --enable-bpf \ --enable-cap-ng \ --enable-capstone \ --enable-coroutine-pool \ --enable-curl \ %if %{have_dbus_display} --enable-dbus-display \ %endif --enable-debug-info \ --enable-docs \ %if %{have_fdt} --enable-fdt=system \ %endif --enable-gettext \ --enable-gnutls \ --enable-guest-agent \ --enable-iconv \ %if %{have_jack} --enable-jack \ %endif --enable-kvm \ --enable-l2tpv3 \ --enable-libiscsi \ %if %{have_pmem} --enable-libpmem \ %endif --enable-libssh \ --enable-libusb \ --enable-libudev \ --enable-linux-aio \ %if "%{_lto_cflags}" != "%{nil}" --enable-lto \ %endif --enable-lzo \ --enable-malloc-trim \ --enable-modules \ --enable-mpath \ %if %{have_numactl} --enable-numa \ %endif %if %{have_opengl} --enable-opengl \ %endif --enable-oss \ --enable-pa \ --enable-pie \ %if 0%{?fedora} --enable-pipewire \ %endif --enable-pixman \ %if %{have_block_rbd} --enable-rbd \ %endif --enable-relocatable \ %if %{have_librdma} --enable-rdma \ %endif --enable-seccomp \ --enable-selinux \ --enable-slirp \ --enable-slirp-smbd \ --enable-snappy \ --enable-system \ --enable-tcg \ --enable-tools \ --enable-tpm \ %if %{have_usbredir} --enable-usb-redir \ %endif --enable-vhost-kernel \ --enable-vhost-net \ --enable-vhost-user \ --enable-vhost-user-blk-server \ --enable-vhost-vdpa \ --enable-vnc \ --enable-png \ --enable-vnc-sasl \ %if %{enable_werror} --enable-werror \ %endif --enable-xkbcommon \ \ \ %if 0%{?fedora} --audio-drv-list=pipewire,pa,sdl,alsa,%{?jack_drv}oss \ %else --audio-drv-list=pa,sdl,alsa,%{?jack_drv}oss \ %endif --target-list-exclude=moxie-softmmu \ --with-default-devices \ --enable-auth-pam \ --enable-bochs \ --enable-brlapi \ --enable-bzip2 \ --enable-cloop \ --enable-curses \ --enable-dmg \ --enable-fuse \ --enable-gio \ %if %{have_block_gluster} --enable-glusterfs \ %endif --enable-gtk \ --enable-hv-balloon \ --enable-libdaxctl \ --enable-libdw \ --enable-libkeyutils \ %if %{have_block_nfs} --enable-libnfs \ %endif %if %{have_liburing} --enable-linux-io-uring \ %endif --enable-linux-user \ --enable-multiprocess \ --enable-parallels \ --enable-qcow1 \ --enable-qed \ --enable-qom-cast-debug \ --enable-replication \ %if %{have_rutabaga_gfx} --enable-rutabaga-gfx \ %endif --enable-sdl \ %if %{have_sdl_image} --enable-sdl-image \ %endif %if %{have_libcacard} --enable-smartcard \ %endif %if %{have_spice} --enable-spice \ --enable-spice-protocol \ %endif --enable-vdi \ --enable-vhost-crypto \ %if %{have_virgl} --enable-virglrenderer \ %endif --enable-vhdx \ --enable-virtfs \ --enable-virtfs-proxy-helper \ --enable-vpc \ --enable-vnc-jpeg \ --enable-vte \ --enable-vvfat \ %if %{have_xen} --enable-xen \ %ifarch x86_64 --enable-xen-pci-passthrough \ %endif %endif --enable-zstd %if %{tools_only} %make_build qemu-img %make_build qemu-io %make_build qemu-nbd %make_build storage-daemon/qemu-storage-daemon %make_build docs/qemu-img.1 %make_build docs/qemu-nbd.8 %make_build docs/qemu-storage-daemon.1 %make_build docs/qemu-storage-daemon-qmp-ref.7 %make_build qga/qemu-ga %make_build docs/qemu-ga.8 # endif tools_only %endif %if !%{tools_only} %make_build popd # Fedora build for qemu-user-static %if %{user_static} pushd %{static_builddir} run_configure \ --enable-attr \ --enable-linux-user \ %ifnarch %{power64} --enable-pie \ %endif --enable-tcg \ --disable-install-blobs \ --static %make_build popd # static %endif # endif !tools_only %endif %install # Install qemu-guest-agent service and udev rules install -D -m 0644 %{_sourcedir}/qemu-guest-agent.service %{buildroot}%{_unitdir}/qemu-guest-agent.service install -D -m 0644 %{_sourcedir}/qemu-ga.sysconfig %{buildroot}%{_sysconfdir}/sysconfig/qemu-ga install -D -m 0644 %{_sourcedir}/99-qemu-guest-agent.rules %{buildroot}%{_udevrulesdir}/99-qemu-guest-agent.rules # Install qemu-ga fsfreeze bits mkdir -p %{buildroot}%{_sysconfdir}/qemu-ga/fsfreeze-hook.d install -p scripts/qemu-guest-agent/fsfreeze-hook %{buildroot}%{_sysconfdir}/qemu-ga/fsfreeze-hook mkdir -p %{buildroot}%{_datadir}/%{name}/qemu-ga/fsfreeze-hook.d/ install -p -m 0644 scripts/qemu-guest-agent/fsfreeze-hook.d/*.sample %{buildroot}%{_datadir}/%{name}/qemu-ga/fsfreeze-hook.d/ mkdir -p -v %{buildroot}%{_localstatedir}/log/qemu-ga/ %if %{tools_only} pushd %{qemu_kvm_build} install -D -p -m 0755 qga/qemu-ga %{buildroot}%{_bindir}/qemu-ga install -D -p -m 0755 qemu-img %{buildroot}%{_bindir}/qemu-img install -D -p -m 0755 qemu-io %{buildroot}%{_bindir}/qemu-io install -D -p -m 0755 qemu-nbd %{buildroot}%{_bindir}/qemu-nbd install -D -p -m 0755 storage-daemon/qemu-storage-daemon %{buildroot}%{_bindir}/qemu-storage-daemon mkdir -p %{buildroot}%{_mandir}/man1/ mkdir -p %{buildroot}%{_mandir}/man7/ mkdir -p %{buildroot}%{_mandir}/man8/ install -D -p -m 644 docs/qemu-img.1* %{buildroot}%{_mandir}/man1 install -D -p -m 644 docs/qemu-nbd.8* %{buildroot}%{_mandir}/man8 install -D -p -m 644 docs/qemu-storage-daemon.1* %{buildroot}%{_mandir}/man1 install -D -p -m 644 docs/qemu-storage-daemon-qmp-ref.7* %{buildroot}%{_mandir}/man7 install -D -p -m 644 docs/qemu-ga.8* %{buildroot}%{_mandir}/man8 popd # endif tools_only %endif %if !%{tools_only} # Install rules to use the bridge helper with libvirt's virbr0 install -D -m 0644 %{_sourcedir}/bridge.conf %{buildroot}%{_sysconfdir}/%{name}/bridge.conf # Install qemu-pr-helper service install -m 0644 contrib/systemd/qemu-pr-helper.service %{buildroot}%{_unitdir} install -m 0644 contrib/systemd/qemu-pr-helper.socket %{buildroot}%{_unitdir} %if %{have_vmsr_helper} # Install qemu-vmsr-helper service install -m 0644 contrib/systemd/qemu-vmsr-helper.service %{buildroot}%{_unitdir} install -m 0644 contrib/systemd/qemu-vmsr-helper.socket %{buildroot}%{_unitdir} %endif %if %{have_memlock_limits} install -D -p -m 644 %{_sourcedir}/95-kvm-memlock.conf %{buildroot}%{_sysconfdir}/security/limits.d/95-kvm-memlock.conf %endif %if %{have_kvm} install -D -p -m 0644 %{_sourcedir}/vhost.conf %{buildroot}%{_sysconfdir}/modprobe.d/vhost.conf install -D -p -m 0644 %{modprobe_kvm_conf} %{buildroot}%{_sysconfdir}/modprobe.d/kvm.conf %endif # Copy some static data into place install -D -p -m 0644 -t %{buildroot}%{qemudocdir} README.rst COPYING COPYING.LIB LICENSE docs/interop/qmp-spec.rst install -D -p -m 0644 qemu.sasl %{buildroot}%{_sysconfdir}/sasl2/%{name}.conf install -m 0644 scripts/dump-guest-memory.py %{buildroot}%{_datadir}/%{name} # Install simpletrace install -m 0755 scripts/simpletrace.py %{buildroot}%{_datadir}/%{name}/simpletrace.py mkdir -p %{buildroot}%{_datadir}/%{name}/tracetool install -m 0644 -t %{buildroot}%{_datadir}/%{name}/tracetool scripts/tracetool/*.py mkdir -p %{buildroot}%{_datadir}/%{name}/tracetool/backend install -m 0644 -t %{buildroot}%{_datadir}/%{name}/tracetool/backend scripts/tracetool/backend/*.py mkdir -p %{buildroot}%{_datadir}/%{name}/tracetool/format install -m 0644 -t %{buildroot}%{_datadir}/%{name}/tracetool/format scripts/tracetool/format/*.py # Ensure vhost-user directory is present even if built without virgl mkdir -p %{buildroot}%{_datadir}/%{name}/vhost-user # Create new directories and put them all under tests-src mkdir -p %{buildroot}%{testsdir}/python mkdir -p %{buildroot}%{testsdir}/tests mkdir -p %{buildroot}%{testsdir}/tests/avocado mkdir -p %{buildroot}%{testsdir}/tests/qemu-iotests mkdir -p %{buildroot}%{testsdir}/scripts/qmp # Install avocado_qemu tests cp -R %{qemu_kvm_build}/tests/avocado/* %{buildroot}%{testsdir}/tests/avocado/ # Install qemu.py and qmp/ scripts required to run avocado_qemu tests cp -R %{qemu_kvm_build}/python/qemu %{buildroot}%{testsdir}/python cp -R %{qemu_kvm_build}/scripts/qmp/* %{buildroot}%{testsdir}/scripts/qmp install -p -m 0755 tests/Makefile.include %{buildroot}%{testsdir}/tests/ # Install qemu-iotests cp -R tests/qemu-iotests/* %{buildroot}%{testsdir}/tests/qemu-iotests/ cp -ur %{qemu_kvm_build}/tests/qemu-iotests/* %{buildroot}%{testsdir}/tests/qemu-iotests/ # Install our custom tests README install -p -m 0644 %{_sourcedir}/README.tests %{buildroot}%{testsdir}/README # Do the actual qemu tree install pushd %{qemu_kvm_build} %make_install popd # We need to make the block device modules and other qemu SO files executable # otherwise RPM won't pick up their dependencies. chmod +x %{buildroot}%{_libdir}/%{name}/*.so # Remove docs we don't care about find %{buildroot}%{qemudocdir} -name .buildinfo -delete rm -rf %{buildroot}%{qemudocdir}/specs # Provided by package openbios rm -rf %{buildroot}%{_datadir}/%{name}/openbios-ppc rm -rf %{buildroot}%{_datadir}/%{name}/openbios-sparc32 rm -rf %{buildroot}%{_datadir}/%{name}/openbios-sparc64 # Provided by package SLOF rm -rf %{buildroot}%{_datadir}/%{name}/slof.bin # Provided by package ipxe rm -rf %{buildroot}%{_datadir}/%{name}/pxe*rom rm -rf %{buildroot}%{_datadir}/%{name}/efi*rom # Provided by package seavgabios rm -rf %{buildroot}%{_datadir}/%{name}/vgabios*bin # Provided by package seabios rm -rf %{buildroot}%{_datadir}/%{name}/bios*.bin # Provided by edk2 rm -rf %{buildroot}%{_datadir}/%{name}/edk2* rm -rf %{buildroot}%{_datadir}/%{name}/firmware # Fedora specific stuff below %find_lang %{name} # Generate qemu-system-* man pages chmod -x %{buildroot}%{_mandir}/man1/* for emu in %{buildroot}%{_bindir}/qemu-system-*; do ln -sf qemu.1.gz %{buildroot}%{_mandir}/man1/$(basename $emu).1.gz done # Install kvm specific source bits, and qemu-kvm manpage %if %{need_qemu_kvm} ln -sf qemu.1.gz %{buildroot}%{_mandir}/man1/qemu-kvm.1.gz ln -sf qemu-system-x86_64 %{buildroot}%{_bindir}/qemu-kvm %endif # Install binfmt %global binfmt_dir %{buildroot}%{_exec_prefix}/lib/binfmt.d mkdir -p %{binfmt_dir} ./scripts/qemu-binfmt-conf.sh --systemd ALL --exportdir %{binfmt_dir} --qemu-path %{_bindir} for i in %{binfmt_dir}/*; do mv $i $(echo $i | sed 's/.conf/-dynamic.conf/'); done # Install qemu-user-static tree %if %{user_static} %define static_buildroot %{buildroot}/static/ mkdir -p %{static_buildroot} pushd %{static_builddir} make DESTDIR=%{static_buildroot} install # Duplicates what the main build installs and we don't # need second copy with a -static suffix rm -f %{static_buildroot}%{_bindir}/qemu-trace-stap popd # static # Rename all QEMU user emulators to have a -static suffix for src in %{static_buildroot}%{_bindir}/qemu-*; do mv $src %{buildroot}%{_bindir}/$(basename $src)-static; done # Rename trace files to match -static suffix for src in %{static_buildroot}%{_datadir}/systemtap/tapset/qemu-*.stp; do dst=`echo $src | sed -e 's/.stp/-static.stp/'` mv $src $dst perl -i -p -e 's/(qemu-\w+)/$1-static/g; s/(qemu\.user\.\w+)/$1.static/g' $dst mv $dst %{buildroot}%{_datadir}/systemtap/tapset done for regularfmt in %{binfmt_dir}/*; do staticfmt="$(echo $regularfmt | sed 's/-dynamic/-static/g')" cat $regularfmt | tr -d '\n' | sed "s/:$/-static:F/" > $staticfmt done rm -rf %{static_buildroot} # endif user_static %endif # end Fedora specific # endif !tools_only %endif %check # Disable iotests. RHEL has done this forever, and these # tests have been flakey in the past export MTESTARGS="--no-suite block" %if %{with check} %if !%{tools_only} pushd %{qemu_kvm_build} echo "Testing %{name}-build" # ppc64le random qtest segfaults with no discernable pattern # Last check: 2023-10 # Added: 2022-06 %ifnarch %{power64} %make_build check %endif popd # endif !tools_only %endif # endif with check %endif %post -n qemu-guest-agent %systemd_post qemu-guest-agent.service %preun -n qemu-guest-agent %systemd_preun qemu-guest-agent.service %postun -n qemu-guest-agent %systemd_postun_with_restart qemu-guest-agent.service %if !%{tools_only} %post common getent group kvm >/dev/null || groupadd -g 36 -r kvm getent group qemu >/dev/null || groupadd -g 107 -r qemu getent passwd qemu >/dev/null || \ useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin \ -c "qemu user" qemu %post user-binfmt /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %postun user-binfmt /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %if %{user_static} %post user-static-aarch64 /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %postun user-static-aarch64 /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %post user-static-alpha /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %postun user-static-alpha /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %post user-static-arm /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %postun user-static-arm /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %post user-static-cris /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %postun user-static-cris /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %post user-static-hexagon /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %postun user-static-hexagon /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %post user-static-hppa /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %postun user-static-hppa /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %post user-static-loongarch64 /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %postun user-static-loongarch64 /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %post user-static-m68k /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %postun user-static-m68k /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %post user-static-microblaze /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %postun user-static-microblaze /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %post user-static-mips /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %postun user-static-mips /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %post user-static-or1k /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %postun user-static-or1k /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %post user-static-ppc /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %postun user-static-ppc /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %post user-static-riscv /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %postun user-static-riscv /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %post user-static-s390x /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %postun user-static-s390x /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %post user-static-sh4 /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %postun user-static-sh4 /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %endif %post user-static-sparc /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %postun user-static-sparc /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %post user-static-x86 /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %postun user-static-x86 /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %post user-static-xtensa /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %postun user-static-xtensa /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : # endif !tools_only %endif %files -n qemu-img %{_bindir}/qemu-img %{_bindir}/qemu-io %{_bindir}/qemu-nbd %{_bindir}/qemu-storage-daemon %{_mandir}/man1/qemu-img.1* %{_mandir}/man8/qemu-nbd.8* %{_mandir}/man1/qemu-storage-daemon.1* %{_mandir}/man7/qemu-storage-daemon-qmp-ref.7* %{_datadir}/systemtap/tapset/qemu-img.stp %{_datadir}/systemtap/tapset/qemu-img-log.stp %{_datadir}/systemtap/tapset/qemu-img-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-io.stp %{_datadir}/systemtap/tapset/qemu-io-log.stp %{_datadir}/systemtap/tapset/qemu-io-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-nbd.stp %{_datadir}/systemtap/tapset/qemu-nbd-log.stp %{_datadir}/systemtap/tapset/qemu-nbd-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-storage-daemon.stp %{_datadir}/systemtap/tapset/qemu-storage-daemon-log.stp %{_datadir}/systemtap/tapset/qemu-storage-daemon-simpletrace.stp %files -n qemu-guest-agent %doc COPYING README.rst %{_bindir}/qemu-ga %{_mandir}/man8/qemu-ga.8* %{_unitdir}/qemu-guest-agent.service %{_udevrulesdir}/99-qemu-guest-agent.rules %config(noreplace) %{_sysconfdir}/sysconfig/qemu-ga %{_sysconfdir}/qemu-ga %{_datadir}/%{name}/qemu-ga %dir %{_localstatedir}/log/qemu-ga %if !%{tools_only} %files # Deliberately empty %files -n qemu-pr-helper %{_bindir}/qemu-pr-helper %{_unitdir}/qemu-pr-helper.service %{_unitdir}/qemu-pr-helper.socket %{_mandir}/man8/qemu-pr-helper.8* %files tools %{_bindir}/qemu-keymap %{_bindir}/qemu-edid %{_bindir}/qemu-trace-stap %{_datadir}/%{name}/simpletrace.py* %dir %{_datadir}/%{name}/tracetool/ %{_datadir}/%{name}/tracetool/*.py* %dir %{_datadir}/%{name}/tracetool/backend/ %{_datadir}/%{name}/tracetool/backend/*.py* %dir %{_datadir}/%{name}/tracetool/format/ %{_datadir}/%{name}/tracetool/format/*.py* %{_datadir}/%{name}/dump-guest-memory.py* %{_datadir}/%{name}/trace-events-all %{_mandir}/man1/qemu-trace-stap.1* # Fedora specific %{_bindir}/elf2dmp %files docs %doc %{qemudocdir} %files common -f %{name}.lang %license COPYING COPYING.LIB LICENSE %dir %{_datadir}/%{name}/ %dir %{_datadir}/%{name}/vhost-user/ %{_datadir}/icons/* %{_datadir}/%{name}/keymaps/ %{_datadir}/%{name}/linuxboot_dma.bin %attr(4755, -, -) %{_libexecdir}/qemu-bridge-helper %dir %{_libdir}/%{name}/ %{_mandir}/man1/%{name}.1* %{_mandir}/man7/qemu-block-drivers.7* %{_mandir}/man7/qemu-cpu-models.7* %{_mandir}/man7/qemu-ga-ref.7* %{_mandir}/man7/qemu-qmp-ref.7* %dir %{_sysconfdir}/%{name} %config(noreplace) %{_sysconfdir}/%{name}/bridge.conf %if %{have_kvm} %config(noreplace) %{_sysconfdir}/modprobe.d/kvm.conf %config(noreplace) %{_sysconfdir}/modprobe.d/vhost.conf %endif %config(noreplace) %{_sysconfdir}/sasl2/%{name}.conf # Fedora specific %{_datadir}/applications/qemu.desktop %exclude %{_datadir}/%{name}/qemu-nsis.bmp %{_libexecdir}/virtfs-proxy-helper %{_mandir}/man1/virtfs-proxy-helper.1* %files tests %{testsdir} %{_libdir}/%{name}/accel-qtest-*.so %if %{have_libblkio} %files block-blkio %{_libdir}/%{name}/block-blkio.so %endif %files block-curl %{_libdir}/%{name}/block-curl.so %files block-iscsi %{_libdir}/%{name}/block-iscsi.so %if %{have_block_rbd} %files block-rbd %{_libdir}/%{name}/block-rbd.so %endif %files block-ssh %{_libdir}/%{name}/block-ssh.so %if %{have_opengl} %files ui-opengl %{_libdir}/%{name}/ui-opengl.so %endif %files block-dmg %{_libdir}/%{name}/block-dmg-bz2.so %if %{have_block_gluster} %files block-gluster %{_libdir}/%{name}/block-gluster.so %endif %if %{have_block_nfs} %files block-nfs %{_libdir}/%{name}/block-nfs.so %endif %files audio-alsa %{_libdir}/%{name}/audio-alsa.so %if %{have_dbus_display} %files audio-dbus %{_libdir}/%{name}/audio-dbus.so %endif %files audio-oss %{_libdir}/%{name}/audio-oss.so %files audio-pa %{_libdir}/%{name}/audio-pa.so %if 0%{?fedora} %files audio-pipewire %{_libdir}/%{name}/audio-pipewire.so %endif %files audio-sdl %{_libdir}/%{name}/audio-sdl.so %if %{have_jack} %files audio-jack %{_libdir}/%{name}/audio-jack.so %endif %files ui-curses %{_libdir}/%{name}/ui-curses.so %if %{have_dbus_display} %files ui-dbus %{_libdir}/%{name}/ui-dbus.so %endif %files ui-gtk %{_libdir}/%{name}/ui-gtk.so %files ui-sdl %{_libdir}/%{name}/ui-sdl.so %files ui-egl-headless %{_libdir}/%{name}/ui-egl-headless.so %files char-baum %{_libdir}/%{name}/chardev-baum.so %files device-display-virtio-gpu %{_libdir}/%{name}/hw-display-virtio-gpu.so %if %{have_virgl} %files device-display-virtio-gpu-gl %{_libdir}/%{name}/hw-display-virtio-gpu-gl.so %endif %if %{have_rutabaga_gfx} %files device-display-virtio-gpu-rutabaga %{_libdir}/%{name}/hw-display-virtio-gpu-rutabaga.so %endif %files device-display-virtio-gpu-pci %{_libdir}/%{name}/hw-display-virtio-gpu-pci.so %if %{have_virgl} %files device-display-virtio-gpu-pci-gl %{_libdir}/%{name}/hw-display-virtio-gpu-pci-gl.so %endif %if %{have_rutabaga_gfx} %files device-display-virtio-gpu-pci-rutabaga %{_libdir}/%{name}/hw-display-virtio-gpu-pci-rutabaga.so %endif %files device-display-virtio-gpu-ccw %{_libdir}/%{name}/hw-s390x-virtio-gpu-ccw.so %files device-display-virtio-vga %{_libdir}/%{name}/hw-display-virtio-vga.so %if %{have_virgl} %files device-display-virtio-vga-gl %{_libdir}/%{name}/hw-display-virtio-vga-gl.so %endif %if %{have_rutabaga_gfx} %files device-display-virtio-vga-rutabaga %{_libdir}/%{name}/hw-display-virtio-vga-rutabaga.so %endif %files device-usb-host %{_libdir}/%{name}/hw-usb-host.so %files device-usb-redirect %{_libdir}/%{name}/hw-usb-redirect.so %if %{have_libcacard} %files device-usb-smartcard %{_libdir}/%{name}/hw-usb-smartcard.so %endif %if %{have_virgl} %files device-display-vhost-user-gpu %{_datadir}/%{name}/vhost-user/50-qemu-gpu.json %{_libexecdir}/vhost-user-gpu %endif %if %{have_spice} %files audio-spice %{_libdir}/%{name}/audio-spice.so %files char-spice %{_libdir}/%{name}/chardev-spice.so %files device-display-qxl %{_libdir}/%{name}/hw-display-qxl.so %files ui-spice-core %{_libdir}/%{name}/ui-spice-core.so %files ui-spice-app %{_libdir}/%{name}/ui-spice-app.so %endif %if %{have_kvm} %files kvm # Deliberately empty %files kvm-core # Deliberately empty %endif %files user %{_bindir}/qemu-i386 %{_bindir}/qemu-x86_64 %{_bindir}/qemu-aarch64 %{_bindir}/qemu-aarch64_be %{_bindir}/qemu-alpha %{_bindir}/qemu-arm %{_bindir}/qemu-armeb %{_bindir}/qemu-cris %{_bindir}/qemu-hppa %{_bindir}/qemu-hexagon %{_bindir}/qemu-loongarch64 %{_bindir}/qemu-m68k %{_bindir}/qemu-microblaze %{_bindir}/qemu-microblazeel %{_bindir}/qemu-mips %{_bindir}/qemu-mipsel %{_bindir}/qemu-mips64 %{_bindir}/qemu-mips64el %{_bindir}/qemu-mipsn32 %{_bindir}/qemu-mipsn32el %{_bindir}/qemu-or1k %{_bindir}/qemu-ppc %{_bindir}/qemu-ppc64 %{_bindir}/qemu-ppc64le %{_bindir}/qemu-riscv32 %{_bindir}/qemu-riscv64 %{_bindir}/qemu-s390x %{_bindir}/qemu-sh4 %{_bindir}/qemu-sh4eb %{_bindir}/qemu-sparc %{_bindir}/qemu-sparc32plus %{_bindir}/qemu-sparc64 %{_bindir}/qemu-xtensa %{_bindir}/qemu-xtensaeb %{_datadir}/systemtap/tapset/qemu-aarch64.stp %{_datadir}/systemtap/tapset/qemu-aarch64-log.stp %{_datadir}/systemtap/tapset/qemu-aarch64-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-aarch64_be.stp %{_datadir}/systemtap/tapset/qemu-aarch64_be-log.stp %{_datadir}/systemtap/tapset/qemu-aarch64_be-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-alpha.stp %{_datadir}/systemtap/tapset/qemu-alpha-log.stp %{_datadir}/systemtap/tapset/qemu-alpha-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-armeb.stp %{_datadir}/systemtap/tapset/qemu-armeb-log.stp %{_datadir}/systemtap/tapset/qemu-armeb-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-arm.stp %{_datadir}/systemtap/tapset/qemu-arm-log.stp %{_datadir}/systemtap/tapset/qemu-arm-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-cris.stp %{_datadir}/systemtap/tapset/qemu-cris-log.stp %{_datadir}/systemtap/tapset/qemu-cris-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-hexagon.stp %{_datadir}/systemtap/tapset/qemu-hexagon-log.stp %{_datadir}/systemtap/tapset/qemu-hexagon-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-hppa.stp %{_datadir}/systemtap/tapset/qemu-hppa-log.stp %{_datadir}/systemtap/tapset/qemu-hppa-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-i386.stp %{_datadir}/systemtap/tapset/qemu-i386-log.stp %{_datadir}/systemtap/tapset/qemu-i386-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-loongarch64.stp %{_datadir}/systemtap/tapset/qemu-loongarch64-log.stp %{_datadir}/systemtap/tapset/qemu-loongarch64-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-m68k.stp %{_datadir}/systemtap/tapset/qemu-m68k-log.stp %{_datadir}/systemtap/tapset/qemu-m68k-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-microblaze.stp %{_datadir}/systemtap/tapset/qemu-microblaze-log.stp %{_datadir}/systemtap/tapset/qemu-microblaze-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-microblazeel.stp %{_datadir}/systemtap/tapset/qemu-microblazeel-log.stp %{_datadir}/systemtap/tapset/qemu-microblazeel-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-mips.stp %{_datadir}/systemtap/tapset/qemu-mips-log.stp %{_datadir}/systemtap/tapset/qemu-mips-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-mips64el.stp %{_datadir}/systemtap/tapset/qemu-mips64el-log.stp %{_datadir}/systemtap/tapset/qemu-mips64el-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-mips64.stp %{_datadir}/systemtap/tapset/qemu-mips64-log.stp %{_datadir}/systemtap/tapset/qemu-mips64-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-mipsel.stp %{_datadir}/systemtap/tapset/qemu-mipsel-log.stp %{_datadir}/systemtap/tapset/qemu-mipsel-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-mipsn32.stp %{_datadir}/systemtap/tapset/qemu-mipsn32-log.stp %{_datadir}/systemtap/tapset/qemu-mipsn32-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-mipsn32el.stp %{_datadir}/systemtap/tapset/qemu-mipsn32el-log.stp %{_datadir}/systemtap/tapset/qemu-mipsn32el-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-or1k.stp %{_datadir}/systemtap/tapset/qemu-or1k-log.stp %{_datadir}/systemtap/tapset/qemu-or1k-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-ppc.stp %{_datadir}/systemtap/tapset/qemu-ppc-log.stp %{_datadir}/systemtap/tapset/qemu-ppc-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-ppc64.stp %{_datadir}/systemtap/tapset/qemu-ppc64-log.stp %{_datadir}/systemtap/tapset/qemu-ppc64-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-ppc64le.stp %{_datadir}/systemtap/tapset/qemu-ppc64le-log.stp %{_datadir}/systemtap/tapset/qemu-ppc64le-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-riscv32.stp %{_datadir}/systemtap/tapset/qemu-riscv32-log.stp %{_datadir}/systemtap/tapset/qemu-riscv32-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-riscv64.stp %{_datadir}/systemtap/tapset/qemu-riscv64-log.stp %{_datadir}/systemtap/tapset/qemu-riscv64-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-s390x.stp %{_datadir}/systemtap/tapset/qemu-s390x-log.stp %{_datadir}/systemtap/tapset/qemu-s390x-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-sh4.stp %{_datadir}/systemtap/tapset/qemu-sh4-log.stp %{_datadir}/systemtap/tapset/qemu-sh4-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-sh4eb.stp %{_datadir}/systemtap/tapset/qemu-sh4eb-log.stp %{_datadir}/systemtap/tapset/qemu-sh4eb-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-sparc.stp %{_datadir}/systemtap/tapset/qemu-sparc-log.stp %{_datadir}/systemtap/tapset/qemu-sparc-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-sparc32plus.stp %{_datadir}/systemtap/tapset/qemu-sparc32plus-log.stp %{_datadir}/systemtap/tapset/qemu-sparc32plus-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-sparc64.stp %{_datadir}/systemtap/tapset/qemu-sparc64-log.stp %{_datadir}/systemtap/tapset/qemu-sparc64-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-x86_64.stp %{_datadir}/systemtap/tapset/qemu-x86_64-log.stp %{_datadir}/systemtap/tapset/qemu-x86_64-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-xtensa.stp %{_datadir}/systemtap/tapset/qemu-xtensa-log.stp %{_datadir}/systemtap/tapset/qemu-xtensa-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-xtensaeb.stp %{_datadir}/systemtap/tapset/qemu-xtensaeb-log.stp %{_datadir}/systemtap/tapset/qemu-xtensaeb-simpletrace.stp %files user-binfmt %{_exec_prefix}/lib/binfmt.d/qemu-*-dynamic.conf %if %{user_static} %files user-static %license COPYING COPYING.LIB LICENSE %files user-static-aarch64 %{_bindir}/qemu-aarch64-static %{_bindir}/qemu-aarch64_be-static %{_datadir}/systemtap/tapset/qemu-aarch64-log-static.stp %{_datadir}/systemtap/tapset/qemu-aarch64-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-aarch64-static.stp %{_datadir}/systemtap/tapset/qemu-aarch64_be-log-static.stp %{_datadir}/systemtap/tapset/qemu-aarch64_be-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-aarch64_be-static.stp %ifnarch aarch64 %{_exec_prefix}/lib/binfmt.d/qemu-aarch64-static.conf %endif %{_exec_prefix}/lib/binfmt.d/qemu-aarch64_be-static.conf %files user-static-alpha %{_bindir}/qemu-alpha-static %{_datadir}/systemtap/tapset/qemu-alpha-log-static.stp %{_datadir}/systemtap/tapset/qemu-alpha-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-alpha-static.stp %{_exec_prefix}/lib/binfmt.d/qemu-alpha-static.conf %files user-static-arm %{_bindir}/qemu-arm-static %{_bindir}/qemu-armeb-static %{_datadir}/systemtap/tapset/qemu-arm-log-static.stp %{_datadir}/systemtap/tapset/qemu-arm-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-arm-static.stp %{_datadir}/systemtap/tapset/qemu-armeb-log-static.stp %{_datadir}/systemtap/tapset/qemu-armeb-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-armeb-static.stp %ifnarch aarch64 %{_exec_prefix}/lib/binfmt.d/qemu-arm-static.conf %endif %{_exec_prefix}/lib/binfmt.d/qemu-armeb-static.conf %files user-static-cris %{_bindir}/qemu-cris-static %{_datadir}/systemtap/tapset/qemu-cris-log-static.stp %{_datadir}/systemtap/tapset/qemu-cris-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-cris-static.stp %files user-static-hexagon %{_bindir}/qemu-hexagon-static %{_datadir}/systemtap/tapset/qemu-hexagon-log-static.stp %{_datadir}/systemtap/tapset/qemu-hexagon-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-hexagon-static.stp %{_exec_prefix}/lib/binfmt.d/qemu-hexagon-static.conf %files user-static-hppa %{_bindir}/qemu-hppa-static %{_datadir}/systemtap/tapset/qemu-hppa-log-static.stp %{_datadir}/systemtap/tapset/qemu-hppa-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-hppa-static.stp %{_exec_prefix}/lib/binfmt.d/qemu-hppa-static.conf %files user-static-loongarch64 %{_bindir}/qemu-loongarch64-static %{_datadir}/systemtap/tapset/qemu-loongarch64-log-static.stp %{_datadir}/systemtap/tapset/qemu-loongarch64-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-loongarch64-static.stp %{_exec_prefix}/lib/binfmt.d/qemu-loongarch64-static.conf %files user-static-m68k %{_bindir}/qemu-m68k-static %{_datadir}/systemtap/tapset/qemu-m68k-log-static.stp %{_datadir}/systemtap/tapset/qemu-m68k-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-m68k-static.stp %{_exec_prefix}/lib/binfmt.d/qemu-m68k-static.conf %files user-static-microblaze %{_bindir}/qemu-microblaze-static %{_bindir}/qemu-microblazeel-static %{_datadir}/systemtap/tapset/qemu-microblaze-log-static.stp %{_datadir}/systemtap/tapset/qemu-microblaze-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-microblaze-static.stp %{_datadir}/systemtap/tapset/qemu-microblazeel-log-static.stp %{_datadir}/systemtap/tapset/qemu-microblazeel-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-microblazeel-static.stp %{_exec_prefix}/lib/binfmt.d/qemu-microblaze-static.conf %{_exec_prefix}/lib/binfmt.d/qemu-microblazeel-static.conf %files user-static-mips %{_bindir}/qemu-mips-static %{_bindir}/qemu-mips64-static %{_bindir}/qemu-mips64el-static %{_bindir}/qemu-mipsel-static %{_bindir}/qemu-mipsn32-static %{_bindir}/qemu-mipsn32el-static %{_datadir}/systemtap/tapset/qemu-mips-log-static.stp %{_datadir}/systemtap/tapset/qemu-mips-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-mips-static.stp %{_datadir}/systemtap/tapset/qemu-mips64-log-static.stp %{_datadir}/systemtap/tapset/qemu-mips64-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-mips64-static.stp %{_datadir}/systemtap/tapset/qemu-mips64el-log-static.stp %{_datadir}/systemtap/tapset/qemu-mips64el-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-mips64el-static.stp %{_datadir}/systemtap/tapset/qemu-mipsel-log-static.stp %{_datadir}/systemtap/tapset/qemu-mipsel-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-mipsel-static.stp %{_datadir}/systemtap/tapset/qemu-mipsn32-log-static.stp %{_datadir}/systemtap/tapset/qemu-mipsn32-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-mipsn32-static.stp %{_datadir}/systemtap/tapset/qemu-mipsn32el-log-static.stp %{_datadir}/systemtap/tapset/qemu-mipsn32el-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-mipsn32el-static.stp %{_exec_prefix}/lib/binfmt.d/qemu-mips-static.conf %{_exec_prefix}/lib/binfmt.d/qemu-mips64-static.conf %{_exec_prefix}/lib/binfmt.d/qemu-mips64el-static.conf %{_exec_prefix}/lib/binfmt.d/qemu-mipsel-static.conf %{_exec_prefix}/lib/binfmt.d/qemu-mipsn32-static.conf %{_exec_prefix}/lib/binfmt.d/qemu-mipsn32el-static.conf %files user-static-or1k %{_bindir}/qemu-or1k-static %{_datadir}/systemtap/tapset/qemu-or1k-log-static.stp %{_datadir}/systemtap/tapset/qemu-or1k-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-or1k-static.stp %{_exec_prefix}/lib/binfmt.d/qemu-or1k-static.conf %files user-static-ppc %{_bindir}/qemu-ppc-static %{_bindir}/qemu-ppc64-static %{_bindir}/qemu-ppc64le-static %{_datadir}/systemtap/tapset/qemu-ppc-log-static.stp %{_datadir}/systemtap/tapset/qemu-ppc-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-ppc-static.stp %{_datadir}/systemtap/tapset/qemu-ppc64-log-static.stp %{_datadir}/systemtap/tapset/qemu-ppc64-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-ppc64-static.stp %{_datadir}/systemtap/tapset/qemu-ppc64le-log-static.stp %{_datadir}/systemtap/tapset/qemu-ppc64le-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-ppc64le-static.stp %{_exec_prefix}/lib/binfmt.d/qemu-ppc-static.conf %{_exec_prefix}/lib/binfmt.d/qemu-ppc64-static.conf %ifnarch ppc64le %{_exec_prefix}/lib/binfmt.d/qemu-ppc64le-static.conf %endif %files user-static-riscv %{_bindir}/qemu-riscv32-static %{_bindir}/qemu-riscv64-static %{_datadir}/systemtap/tapset/qemu-riscv32-log-static.stp %{_datadir}/systemtap/tapset/qemu-riscv32-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-riscv32-static.stp %{_datadir}/systemtap/tapset/qemu-riscv64-log-static.stp %{_datadir}/systemtap/tapset/qemu-riscv64-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-riscv64-static.stp %{_exec_prefix}/lib/binfmt.d/qemu-riscv32-static.conf %ifnarch riscv64 %{_exec_prefix}/lib/binfmt.d/qemu-riscv64-static.conf %endif %files user-static-s390x %{_bindir}/qemu-s390x-static %{_datadir}/systemtap/tapset/qemu-s390x-log-static.stp %{_datadir}/systemtap/tapset/qemu-s390x-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-s390x-static.stp %ifnarch s390x %{_exec_prefix}/lib/binfmt.d/qemu-s390x-static.conf %endif %files user-static-sh4 %{_bindir}/qemu-sh4-static %{_bindir}/qemu-sh4eb-static %{_datadir}/systemtap/tapset/qemu-sh4-log-static.stp %{_datadir}/systemtap/tapset/qemu-sh4-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-sh4-static.stp %{_datadir}/systemtap/tapset/qemu-sh4eb-log-static.stp %{_datadir}/systemtap/tapset/qemu-sh4eb-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-sh4eb-static.stp %{_exec_prefix}/lib/binfmt.d/qemu-sh4-static.conf %{_exec_prefix}/lib/binfmt.d/qemu-sh4eb-static.conf %files user-static-sparc %{_bindir}/qemu-sparc-static %{_bindir}/qemu-sparc32plus-static %{_bindir}/qemu-sparc64-static %{_datadir}/systemtap/tapset/qemu-sparc-log-static.stp %{_datadir}/systemtap/tapset/qemu-sparc-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-sparc-static.stp %{_datadir}/systemtap/tapset/qemu-sparc64-log-static.stp %{_datadir}/systemtap/tapset/qemu-sparc64-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-sparc64-static.stp %{_datadir}/systemtap/tapset/qemu-sparc32plus-log-static.stp %{_datadir}/systemtap/tapset/qemu-sparc32plus-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-sparc32plus-static.stp %{_exec_prefix}/lib/binfmt.d/qemu-sparc-static.conf %{_exec_prefix}/lib/binfmt.d/qemu-sparc32plus-static.conf %{_exec_prefix}/lib/binfmt.d/qemu-sparc64-static.conf %files user-static-x86 %{_bindir}/qemu-i386-static %{_bindir}/qemu-x86_64-static %{_datadir}/systemtap/tapset/qemu-i386-log-static.stp %{_datadir}/systemtap/tapset/qemu-i386-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-i386-static.stp %{_datadir}/systemtap/tapset/qemu-x86_64-log-static.stp %{_datadir}/systemtap/tapset/qemu-x86_64-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-x86_64-static.stp %ifnarch %{ix86} x86_64 %{_exec_prefix}/lib/binfmt.d/qemu-i386-static.conf %{_exec_prefix}/lib/binfmt.d/qemu-i486-static.conf %{_exec_prefix}/lib/binfmt.d/qemu-x86_64-static.conf %endif %files user-static-xtensa %{_bindir}/qemu-xtensa-static %{_bindir}/qemu-xtensaeb-static %{_datadir}/systemtap/tapset/qemu-xtensa-log-static.stp %{_datadir}/systemtap/tapset/qemu-xtensa-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-xtensa-static.stp %{_datadir}/systemtap/tapset/qemu-xtensaeb-log-static.stp %{_datadir}/systemtap/tapset/qemu-xtensaeb-simpletrace-static.stp %{_datadir}/systemtap/tapset/qemu-xtensaeb-static.stp %{_exec_prefix}/lib/binfmt.d/qemu-xtensa-static.conf %{_exec_prefix}/lib/binfmt.d/qemu-xtensaeb-static.conf %endif %files system-aarch64 %files system-aarch64-core %{_bindir}/qemu-system-aarch64 %{_datadir}/systemtap/tapset/qemu-system-aarch64.stp %{_datadir}/systemtap/tapset/qemu-system-aarch64-log.stp %{_datadir}/systemtap/tapset/qemu-system-aarch64-simpletrace.stp %{_mandir}/man1/qemu-system-aarch64.1* %files system-alpha %files system-alpha-core %{_bindir}/qemu-system-alpha %{_datadir}/systemtap/tapset/qemu-system-alpha.stp %{_datadir}/systemtap/tapset/qemu-system-alpha-log.stp %{_datadir}/systemtap/tapset/qemu-system-alpha-simpletrace.stp %{_mandir}/man1/qemu-system-alpha.1* %{_datadir}/%{name}/palcode-clipper %files system-arm %files system-arm-core %{_bindir}/qemu-system-arm %{_datadir}/%{name}/npcm7xx_bootrom.bin %{_datadir}/systemtap/tapset/qemu-system-arm.stp %{_datadir}/systemtap/tapset/qemu-system-arm-log.stp %{_datadir}/systemtap/tapset/qemu-system-arm-simpletrace.stp %{_mandir}/man1/qemu-system-arm.1* %files system-avr %files system-avr-core %{_bindir}/qemu-system-avr %{_datadir}/systemtap/tapset/qemu-system-avr.stp %{_datadir}/systemtap/tapset/qemu-system-avr-log.stp %{_datadir}/systemtap/tapset/qemu-system-avr-simpletrace.stp %{_mandir}/man1/qemu-system-avr.1* %files system-cris %files system-cris-core %{_bindir}/qemu-system-cris %{_datadir}/systemtap/tapset/qemu-system-cris.stp %{_datadir}/systemtap/tapset/qemu-system-cris-log.stp %{_datadir}/systemtap/tapset/qemu-system-cris-simpletrace.stp %{_mandir}/man1/qemu-system-cris.1* %files system-hppa %files system-hppa-core %{_bindir}/qemu-system-hppa %{_datadir}/systemtap/tapset/qemu-system-hppa.stp %{_datadir}/systemtap/tapset/qemu-system-hppa-log.stp %{_datadir}/systemtap/tapset/qemu-system-hppa-simpletrace.stp %{_mandir}/man1/qemu-system-hppa.1* %{_datadir}/%{name}/hppa-firmware.img %{_datadir}/%{name}/hppa-firmware64.img %files system-loongarch64 %files system-loongarch64-core %{_bindir}/qemu-system-loongarch64 %{_datadir}/systemtap/tapset/qemu-system-loongarch64.stp %{_datadir}/systemtap/tapset/qemu-system-loongarch64-log.stp %{_datadir}/systemtap/tapset/qemu-system-loongarch64-simpletrace.stp %{_mandir}/man1/qemu-system-loongarch64.1* %files system-m68k %files system-m68k-core %{_bindir}/qemu-system-m68k %{_datadir}/systemtap/tapset/qemu-system-m68k.stp %{_datadir}/systemtap/tapset/qemu-system-m68k-log.stp %{_datadir}/systemtap/tapset/qemu-system-m68k-simpletrace.stp %{_mandir}/man1/qemu-system-m68k.1* %files system-microblaze %files system-microblaze-core %{_bindir}/qemu-system-microblaze %{_bindir}/qemu-system-microblazeel %{_datadir}/systemtap/tapset/qemu-system-microblaze.stp %{_datadir}/systemtap/tapset/qemu-system-microblaze-log.stp %{_datadir}/systemtap/tapset/qemu-system-microblaze-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-system-microblazeel.stp %{_datadir}/systemtap/tapset/qemu-system-microblazeel-log.stp %{_datadir}/systemtap/tapset/qemu-system-microblazeel-simpletrace.stp %{_mandir}/man1/qemu-system-microblaze.1* %{_mandir}/man1/qemu-system-microblazeel.1* %{_datadir}/%{name}/petalogix*.dtb %files system-mips %files system-mips-core %{_bindir}/qemu-system-mips %{_bindir}/qemu-system-mipsel %{_bindir}/qemu-system-mips64 %{_bindir}/qemu-system-mips64el %{_datadir}/systemtap/tapset/qemu-system-mips.stp %{_datadir}/systemtap/tapset/qemu-system-mips-log.stp %{_datadir}/systemtap/tapset/qemu-system-mips-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-system-mipsel.stp %{_datadir}/systemtap/tapset/qemu-system-mipsel-log.stp %{_datadir}/systemtap/tapset/qemu-system-mipsel-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-system-mips64.stp %{_datadir}/systemtap/tapset/qemu-system-mips64-log.stp %{_datadir}/systemtap/tapset/qemu-system-mips64-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-system-mips64el.stp %{_datadir}/systemtap/tapset/qemu-system-mips64el-log.stp %{_datadir}/systemtap/tapset/qemu-system-mips64el-simpletrace.stp %{_mandir}/man1/qemu-system-mips.1* %{_mandir}/man1/qemu-system-mipsel.1* %{_mandir}/man1/qemu-system-mips64el.1* %{_mandir}/man1/qemu-system-mips64.1* %files system-or1k %files system-or1k-core %{_bindir}/qemu-system-or1k %{_datadir}/systemtap/tapset/qemu-system-or1k.stp %{_datadir}/systemtap/tapset/qemu-system-or1k-log.stp %{_datadir}/systemtap/tapset/qemu-system-or1k-simpletrace.stp %{_mandir}/man1/qemu-system-or1k.1* %files system-ppc %files system-ppc-core %{_bindir}/qemu-system-ppc %{_bindir}/qemu-system-ppc64 %{_datadir}/systemtap/tapset/qemu-system-ppc.stp %{_datadir}/systemtap/tapset/qemu-system-ppc-log.stp %{_datadir}/systemtap/tapset/qemu-system-ppc-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-system-ppc64.stp %{_datadir}/systemtap/tapset/qemu-system-ppc64-log.stp %{_datadir}/systemtap/tapset/qemu-system-ppc64-simpletrace.stp %{_mandir}/man1/qemu-system-ppc.1* %{_mandir}/man1/qemu-system-ppc64.1* %{_datadir}/%{name}/bamboo.dtb %{_datadir}/%{name}/canyonlands.dtb %{_datadir}/%{name}/qemu_vga.ndrv %{_datadir}/%{name}/skiboot.lid %{_datadir}/%{name}/u-boot.e500 %{_datadir}/%{name}/u-boot-sam460-20100605.bin %{_datadir}/%{name}/vof*.bin %if %{have_memlock_limits} %{_sysconfdir}/security/limits.d/95-kvm-memlock.conf %endif %files system-riscv %files system-riscv-core %{_bindir}/qemu-system-riscv32 %{_bindir}/qemu-system-riscv64 %{_datadir}/%{name}/opensbi-riscv*.bin %{_datadir}/systemtap/tapset/qemu-system-riscv32.stp %{_datadir}/systemtap/tapset/qemu-system-riscv32-log.stp %{_datadir}/systemtap/tapset/qemu-system-riscv32-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-system-riscv64.stp %{_datadir}/systemtap/tapset/qemu-system-riscv64-log.stp %{_datadir}/systemtap/tapset/qemu-system-riscv64-simpletrace.stp %{_mandir}/man1/qemu-system-riscv*.1* %files system-rx %files system-rx-core %{_bindir}/qemu-system-rx %{_datadir}/systemtap/tapset/qemu-system-rx.stp %{_datadir}/systemtap/tapset/qemu-system-rx-log.stp %{_datadir}/systemtap/tapset/qemu-system-rx-simpletrace.stp %{_mandir}/man1/qemu-system-rx.1* %files system-s390x %files system-s390x-core %{_bindir}/qemu-system-s390x %{_datadir}/systemtap/tapset/qemu-system-s390x.stp %{_datadir}/systemtap/tapset/qemu-system-s390x-log.stp %{_datadir}/systemtap/tapset/qemu-system-s390x-simpletrace.stp %{_mandir}/man1/qemu-system-s390x.1* %{_datadir}/%{name}/s390-ccw.img %{_datadir}/%{name}/s390-netboot.img %files system-sh4 %files system-sh4-core %{_bindir}/qemu-system-sh4 %{_bindir}/qemu-system-sh4eb %{_datadir}/systemtap/tapset/qemu-system-sh4.stp %{_datadir}/systemtap/tapset/qemu-system-sh4-log.stp %{_datadir}/systemtap/tapset/qemu-system-sh4-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-system-sh4eb.stp %{_datadir}/systemtap/tapset/qemu-system-sh4eb-log.stp %{_datadir}/systemtap/tapset/qemu-system-sh4eb-simpletrace.stp %{_mandir}/man1/qemu-system-sh4.1* %{_mandir}/man1/qemu-system-sh4eb.1* %files system-sparc %files system-sparc-core %{_bindir}/qemu-system-sparc %{_bindir}/qemu-system-sparc64 %{_datadir}/systemtap/tapset/qemu-system-sparc.stp %{_datadir}/systemtap/tapset/qemu-system-sparc-log.stp %{_datadir}/systemtap/tapset/qemu-system-sparc-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-system-sparc64.stp %{_datadir}/systemtap/tapset/qemu-system-sparc64-log.stp %{_datadir}/systemtap/tapset/qemu-system-sparc64-simpletrace.stp %{_mandir}/man1/qemu-system-sparc.1* %{_mandir}/man1/qemu-system-sparc64.1* %{_datadir}/%{name}/QEMU,tcx.bin %{_datadir}/%{name}/QEMU,cgthree.bin %files system-tricore %files system-tricore-core %{_bindir}/qemu-system-tricore %{_datadir}/systemtap/tapset/qemu-system-tricore.stp %{_datadir}/systemtap/tapset/qemu-system-tricore-log.stp %{_datadir}/systemtap/tapset/qemu-system-tricore-simpletrace.stp %{_mandir}/man1/qemu-system-tricore.1* %files system-x86 %files system-x86-core %{_bindir}/qemu-system-i386 %{_bindir}/qemu-system-x86_64 %{_libdir}/%{name}/accel-tcg-i386.so %{_libdir}/%{name}/accel-tcg-x86_64.so %{_datadir}/systemtap/tapset/qemu-system-i386.stp %{_datadir}/systemtap/tapset/qemu-system-i386-log.stp %{_datadir}/systemtap/tapset/qemu-system-i386-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-system-x86_64.stp %{_datadir}/systemtap/tapset/qemu-system-x86_64-log.stp %{_datadir}/systemtap/tapset/qemu-system-x86_64-simpletrace.stp %{_mandir}/man1/qemu-system-i386.1* %{_mandir}/man1/qemu-system-x86_64.1* %{_datadir}/%{name}/kvmvapic.bin %{_datadir}/%{name}/linuxboot.bin %{_datadir}/%{name}/multiboot.bin %{_datadir}/%{name}/multiboot_dma.bin %{_datadir}/%{name}/pvh.bin %{_datadir}/%{name}/qboot.rom %if %{need_qemu_kvm} %{_bindir}/qemu-kvm %{_mandir}/man1/qemu-kvm.1* %endif %if %{have_vmsr_helper} %{_bindir}/qemu-vmsr-helper %{_unitdir}/qemu-vmsr-helper.service %{_unitdir}/qemu-vmsr-helper.socket %endif %files system-xtensa %files system-xtensa-core %{_bindir}/qemu-system-xtensa %{_bindir}/qemu-system-xtensaeb %{_datadir}/systemtap/tapset/qemu-system-xtensa.stp %{_datadir}/systemtap/tapset/qemu-system-xtensa-log.stp %{_datadir}/systemtap/tapset/qemu-system-xtensa-simpletrace.stp %{_datadir}/systemtap/tapset/qemu-system-xtensaeb.stp %{_datadir}/systemtap/tapset/qemu-system-xtensaeb-log.stp %{_datadir}/systemtap/tapset/qemu-system-xtensaeb-simpletrace.stp %{_mandir}/man1/qemu-system-xtensa.1* %{_mandir}/man1/qemu-system-xtensaeb.1* # endif !tools_only %endif %changelog * Tue Nov 05 2024 Cole Robinson - 9.1.1-2 - Fix spice audio regression with qemu 9.1.1 * Thu Oct 24 2024 Cole Robinson - 9.1.1-1 - Rebase to qemu 9.1.1 stable * Thu Oct 24 2024 Daniel P. Berrangé - 9.1.0-4 - Add openat2 support to linux-user - Fix compat with new glibc for 'struct sched_attr' * Wed Oct 16 2024 Daniel P. Berrangé - 9.1.0-3 - Replace BLACKLIST_RPC with QEMU_GA_ARGS in sysconfig file - Related rhbz #2258100 * Mon Sep 16 2024 Richard W.M. Jones - 2:9.1.0-2 - Replace qemu --blacklist option with -b (related: RHBZ#2258100) * Thu Sep 05 2024 Cole Robinson - 9.1.0-1 - New release qemu 9.1.0 GA * Thu Aug 29 2024 Cole Robinson - 9.1.0-0.3.rc4 - New release qemu-9.1.0-rc4 * Mon Aug 26 2024 Cole Robinson - 9.1.0-0.2.rc3 - New release qemu-9.1.0-rc3 * Tue Aug 20 2024 Cole Robinson - 9.1.0-0.1.rc2 - New release qemu-9.1.0-rc2 * Mon Aug 05 2024 Cole Robinson - 2:9.0.0-5 - Fix static builds with new glib2 - Add libdir/qemu to qemu-common (bz 2283996) * Mon Aug 05 2024 Richard W.M. Jones - 2:9.0.0-4 - Rebuild for Xen 4.19.0 * Mon Jul 22 2024 Lumír Balhar - 2:9.0.0-3 - Add new systemtap-sdt-dtrace to build deps * Fri Jul 19 2024 Fedora Release Engineering - 2:9.0.0-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_41_Mass_Rebuild * Wed Apr 24 2024 Cole Robinson - 9.0.0-1 - New release qemu 9.0.0 GA * Tue Apr 23 2024 Cole Robinson - 9.0.0-0.1.rc4 - New release qemu 9.0.0-rc4 * Sat Apr 06 2024 Cole Robinson - 8.2.2-2 - Rebuild for new libiscsi * Wed Mar 06 2024 Cole Robinson - 8.2.2-1 - New release qemu 8.2.2 * Mon Feb 26 2024 Richard W.M. Jones - 2:8.2.0-9 - ppc/spapr: Initialize max_cpus limit to SPAPR_IRQ_NR_IPIS (RHBZ#2265982) * Wed Feb 21 2024 Richard W.M. Jones - 2:8.2.0-8 - Fix user-emulation of FIFREEZE and FITHAW ioctls * Thu Feb 01 2024 Cole Robinson - 8.2.0-7 - Enable PIE for qemu-user-static builds - Replace PVH build fix patch with version that should work on centos * Tue Jan 30 2024 Richard W.M. Jones - 2:8.2.0-6 - Fix builds on i686. * Fri Jan 26 2024 Fedora Release Engineering - 2:8.2.0-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild * Mon Jan 22 2024 Fedora Release Engineering - 2:8.2.0-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild * Fri Jan 12 2024 Daan De Meyer - 8.2.0-2 - Backport TCG patch that fixes OVMF boot with 4M variables * Tue Jan 9 2024 Daniel P. Berrangé - 8.2.0-1 - Update to 8.2.0 release - Add gpg verification of source tarball * Sat Dec 9 2023 Richard W.M. Jones - 2:8.2.0-0.3.rc2 - Further fix for Xen 4.18 * Tue Dec 05 2023 Richard W.M. Jones - 2:8.2.0-0.2.rc2 - Bump and rebuild for xen 4.18.0 * Sat Dec 02 2023 Cole Robinson - 8.2.0-0.1-rc2 - Rebase to qemu 8.2.0-rc2 * Wed Nov 29 2023 Richard W.M. Jones - 2:8.1.2-3 - Bump and rebuild for xen 4.18.0 * Tue Nov 28 2023 Richard W.M. Jones - 2:8.1.2-2 - Bump and rebuild for capstone 5.0.1 - Backport patch from crobinso to fix build on Rawhide * Tue Oct 17 2023 Cole Robinson - 8.1.2-1 - Update to version 8.1.2 * Tue Sep 26 2023 Cole Robinson - 8.1.1-1 - Rebase to qemu 8.1.1 * Thu Aug 24 2023 Cole Robinson - 8.1.0-2 - Make qemu-docs noarch * Wed Aug 23 2023 Cole Robinson - 8.1.0-1 - Rebase to qemu 8.1.0 GA * Mon Aug 21 2023 Davide Cavalca - 8.1.0-0.2-rc4 - Adjust virtiofsd requires for el9 and older * Sun Aug 20 2023 Cole Robinson - 8.1.0-0.1-rc4 - Rebase to qemu 8.1.0-rc4 * Thu Jul 20 2023 Camilla Conte - 2:8.0.3-1 - New upstream release 8.0.3 * Mon Jul 03 2023 Camilla Conte - 2:8.0.2-1 - New upstream release 8.0.2 - Fix arabic keyboard layout name * Thu Jun 01 2023 Richard W.M. Jones - 2:8.0.0-4 - Rebuild for libnfs soname bump * Thu Apr 27 2023 Daniel P. Berrangé - 8.0.0-3 - Drop sgabios-bin requirement and related baggage * Tue Apr 25 2023 Daniel P. Berrangé - 8.0.0-2 - Obsolete qemu-virtiofsd on i686 (rhbz #2189368) * Thu Apr 20 2023 Eduardo Lima (Etrunko) - 8.0.0-1 - Rebase to qemu 8.0.0 * Wed Apr 19 2023 Eduardo Lima (Etrunko) - 7.2.1-1 - Rebase to qemu 7.2.1 * Mon Feb 27 2023 Richard W.M. Jones - 7.2.0-7 - Fix virtio-blk-pci detect-zeroes=unmap (RHBZ#2173357) - Fix build with glib2 2.75.3 (RHBZ#2173639) - Disable the tests on i686 * Tue Jan 31 2023 Stefan Hajnoczi - 7.2.0-6 - Enable libblkio * Fri Jan 20 2023 Fedora Release Engineering - 2:7.2.0-5 - Rebuilt for https://fedoraproject.org/wiki/Fedora_38_Mass_Rebuild * Wed Jan 11 2023 Richard W.M. Jones - 2:7.2.0-4 - Rebuild for xen-4.17.0, second attempt * Tue Jan 10 2023 Daniel P. Berrangé - 7.2.0-3 - Fix compat with linux > 6.1 headers - Re-enable iotests * Tue Jan 03 2023 Richard W.M. Jones - 2:7.2.0-2 - Rebuild for xen-4.17.0 * Mon Dec 19 2022 Eduardo Lima (Etrunko) - 7.2.0-1 - Rebase to qemu 7.2.0 * Fri Nov 11 2022 Eduardo Lima (Etrunko) - 7.1.0-4 - Update libbpf dependency * Thu Sep 08 2022 Davide Cavalca - 7.1.0-3 - Unconditionally enable capstone-devel * Thu Sep 08 2022 Davide Cavalca - 7.1.0-2 - Bump required meson version * Wed Aug 31 2022 Eduardo Lima (Etrunko) - 7.1.0-1 - Rebase to qemu 7.1.0 * Tue Aug 2 2022 Daniel P. Berrangé - 7.0.0-9 - Fix compat with glibc 2.36 headers * Mon Jul 25 2022 Paolo Bonzini - 2:7.0.0-8 - Replace pcre-static dependency with pcre2-static, to adjust for glib switching * Fri Jul 22 2022 Fedora Release Engineering - 2:7.0.0-7 - Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild * Sat Jun 11 2022 Cole Robinson - 7.0.0-6 - Adjust for Xen dropping 32bit arches * Mon Jun 06 2022 Daniel J Walsh - 7.0.0-5 - Split qemu-user-static into per-arch subpackages (bz 2061584) * Thu Jun 02 2022 Cole Robinson - 7.0.0-4 - Fix virtio-scsi hang (bz #2079347) - Add dep on virtio-gpu-ccw (bz #2091964) * Tue May 17 2022 Cole Robinson - 7.0.0-3 - Make qemu-common own /usr/share/qemu/vhost-user (bz 2086836) - Add virtiofsd to qemu-system-* deps (bz 2083155) - Add qemu-pr-helper to qemu-system-* deps * Tue May 3 2022 Daniel P. Berrangé - 7.0.0-2 - Drop redundant qemu-trace-stap copy from qemu-user-static (rhbz#2061584) - Remove qemu-common dep from qemu-user-static (rhbz#2061584) * Fri Apr 08 2022 Eduardo Lima (Etrunko) - 7.0.0-1 - Rebase to qemu 7.0.0-1 * Wed Apr 06 2022 Richard W.M. Jones - 2:6.2.0-8 - acpi: fix QEMU crash when started with SLIC table (RHBZ#2072303) * Fri Apr 01 2022 Neal Gompa - 2:6.2.0-7 - Backport virtiofsd changes to fix crashes on F36+ Resolves: rhbz#2070066 * Fri Apr 01 2022 Richard W.M. Jones - 2:6.2.0-6 - Bump and rebuild for SONAME change in libmpathpersist (RHBZ#2069778) * Thu Feb 10 2022 Cole Robinson - 6.2.0-5 - Split out qemu-virtiofsd subpackage * Wed Feb 09 2022 Eduardo Lima (Etrunko) - 2:6.2.0-4 - virtiofsd: Drop membership of all supplementary groups (CVE-2022-0358) Resolves: rhbz#2044863 * Wed Feb 2 2022 Paolo Bonzini - 2:6.2.0-3 - Fix non-SGX builds * Fri Jan 21 2022 Fedora Release Engineering - 2:6.2.0-2.1 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Tue Jan 11 2022 Richard W.M. Jones - 2:6.2.0-2 - Bump release and rebuild for new xen