Warning: Permanently added '2620:52:3:1:dead:beef:cafe:c18a' (ED25519) to the list of known hosts. cmd: ['copr-distgit-client', 'sources'] cwd: /var/lib/copr-rpmbuild/workspace/workdir-huuvom22/freecad rc: 0 stdout: stderr: INFO: Reading stdout from command: git rev-parse --abbrev-ref HEAD INFO: Reading stdout from command: git rev-parse HEAD INFO: Reading sources specification file: sources INFO: Downloading FreeCAD-0.20.2.tar.gz INFO: Calling: curl -H Pragma: -o FreeCAD-0.20.2.tar.gz --location --remote-time --show-error --fail https://copr-dist-git.fedorainfracloud.org/repo/pkgs/orion/netcdf-4.9.2/freecad/FreeCAD-0.20.2.tar.gz/md5/f99966634e3d2c5cd03ee45e3258f137/FreeCAD-0.20.2.tar.gz % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 72.0M 100 72.0M 0 0 60.5M 0 0:00:01 0:00:01 --:--:-- 60.5M INFO: Reading stdout from command: md5sum FreeCAD-0.20.2.tar.gz Running (timeout=96000): unbuffer mock --buildsrpm --spec /var/lib/copr-rpmbuild/workspace/workdir-huuvom22/freecad/freecad.spec --sources /var/lib/copr-rpmbuild/workspace/workdir-huuvom22/freecad --resultdir /var/lib/copr-rpmbuild/results --uniqueext 1679462631.716718 -r /var/lib/copr-rpmbuild/results/configs/child.cfg INFO: mock.py version 3.5 starting (python version = 3.11.0, NVR = mock-3.5-1.fc37)... Start(bootstrap): init plugins INFO: tmpfs initialized INFO: selinux enabled INFO: chroot_scan: initialized INFO: compress_logs: initialized Finish(bootstrap): init plugins Start: init plugins INFO: tmpfs initialized INFO: selinux enabled INFO: chroot_scan: initialized INFO: compress_logs: initialized Finish: init plugins INFO: Signal handler active Start: run INFO: Start(/var/lib/copr-rpmbuild/workspace/workdir-huuvom22/freecad/freecad.spec) Config(fedora-rawhide-x86_64) Start: clean chroot Finish: clean chroot Start(bootstrap): chroot init INFO: mounting tmpfs at /var/lib/mock/fedora-rawhide-x86_64-bootstrap-1679462631.716718/root. INFO: calling preinit hooks INFO: enabled root cache INFO: enabled package manager cache Start(bootstrap): cleaning package manager metadata Finish(bootstrap): cleaning package manager metadata INFO: enabled HW Info plugin Mock Version: 3.5 INFO: Mock Version: 3.5 Start(bootstrap): dnf install No matches found for the following disable plugin patterns: local, spacewalk, versionlock Updating Subscription Management repositories. Unable to read consumer identity This system is not registered with an entitlement server. You can use subscription-manager to register. Copr repository 583 kB/s | 358 kB 00:00 fedora 539 kB/s | 66 MB 02:04 Dependencies resolved. ================================================================================ Package Arch Version Repo Size ================================================================================ Installing: dnf noarch 4.14.0-2.fc38 fedora 478 k dnf-plugins-core noarch 4.3.1-2.fc38 fedora 33 k Installing dependencies: alternatives x86_64 1.21-2.fc38 fedora 38 k audit-libs x86_64 3.1-2.fc39 fedora 117 k basesystem noarch 11-15.fc38 fedora 7.0 k bash x86_64 5.2.15-3.fc38 fedora 1.8 M bzip2-libs x86_64 1.0.8-13.fc38 fedora 41 k ca-certificates noarch 2023.2.60-2.fc38 fedora 845 k coreutils x86_64 9.1-11.fc38 fedora 1.1 M coreutils-common x86_64 9.1-11.fc38 fedora 2.0 M crypto-policies noarch 20230301-1.gita12f7b2.fc39 fedora 93 k curl x86_64 8.0.1-1.fc39 fedora 350 k cyrus-sasl-lib x86_64 2.1.28-9.fc38 fedora 794 k dbus-libs x86_64 1:1.14.6-1.fc38 fedora 156 k dnf-data noarch 4.14.0-2.fc38 fedora 40 k elfutils-default-yama-scope noarch 0.189-1.fc39 fedora 15 k elfutils-libelf x86_64 0.189-1.fc39 fedora 196 k elfutils-libs x86_64 0.189-1.fc39 fedora 260 k expat x86_64 2.5.0-2.fc38 fedora 110 k fedora-gpg-keys noarch 39-0.1 fedora 126 k fedora-release noarch 39-0.5 fedora 12 k fedora-release-common noarch 39-0.5 fedora 22 k fedora-release-identity-basic noarch 39-0.5 fedora 13 k fedora-repos noarch 39-0.1 fedora 9.4 k fedora-repos-rawhide noarch 39-0.1 fedora 9.0 k file-libs x86_64 5.44-3.fc39 fedora 730 k filesystem x86_64 3.18-4.fc39 fedora 1.1 M findutils x86_64 1:4.9.0-3.fc38 fedora 492 k gawk x86_64 5.1.1-5.fc38 fedora 1.0 M gdbm-libs x86_64 1:1.23-3.fc38 fedora 56 k glib2 x86_64 2.76.0-1.fc39 fedora 2.8 M glibc x86_64 2.37.9000-3.fc39 fedora 2.1 M glibc-common x86_64 2.37.9000-3.fc39 fedora 321 k glibc-minimal-langpack x86_64 2.37.9000-3.fc39 fedora 43 k gmp x86_64 1:6.2.1-4.fc38 fedora 313 k gnupg2 x86_64 2.4.0-3.fc39 fedora 2.6 M gnutls x86_64 3.8.0-3.fc39 fedora 1.1 M gpgme x86_64 1.17.1-5.fc39 fedora 206 k grep x86_64 3.9-1.fc39 fedora 295 k ima-evm-utils x86_64 1.4-7.fc38 fedora 62 k json-c x86_64 0.16-4.fc38 fedora 41 k keyutils-libs x86_64 1.6.1-6.fc38 fedora 31 k krb5-libs x86_64 1.20.1-9.fc39 fedora 727 k libacl x86_64 2.3.1-7.fc39 fedora 23 k libarchive x86_64 3.6.1-5.fc39 fedora 400 k libassuan x86_64 2.5.5-6.fc38 fedora 67 k libattr x86_64 2.5.1-7.fc39 fedora 18 k libb2 x86_64 0.98.1-8.fc38 fedora 25 k libblkid x86_64 2.38.1-4.fc38 fedora 106 k libbrotli x86_64 1.0.9-11.fc38 fedora 317 k libcap x86_64 2.48-6.fc38 fedora 67 k libcap-ng x86_64 0.8.3-5.fc38 fedora 32 k libcom_err x86_64 1.46.5-4.fc38 fedora 26 k libcomps x86_64 0.1.19-1.fc39 fedora 77 k libcurl x86_64 8.0.1-1.fc39 fedora 313 k libdnf x86_64 0.68.0-2.fc38 fedora 662 k libeconf x86_64 0.4.0-5.fc38 fedora 27 k libevent x86_64 2.1.12-8.fc38 fedora 257 k libffi x86_64 3.4.4-2.fc38 fedora 38 k libfsverity x86_64 1.4-9.fc38 fedora 19 k libgcc x86_64 13.0.1-0.8.fc39 fedora 102 k libgcrypt x86_64 1.10.1-7.fc38 fedora 511 k libgomp x86_64 13.0.1-0.8.fc39 fedora 310 k libgpg-error x86_64 1.46-2.fc38 fedora 228 k libidn2 x86_64 2.3.4-2.fc38 fedora 160 k libksba x86_64 1.6.3-2.fc38 fedora 159 k libmodulemd x86_64 2.14.0-5.fc38 fedora 233 k libmount x86_64 2.38.1-4.fc38 fedora 135 k libnghttp2 x86_64 1.52.0-1.fc39 fedora 75 k libnsl2 x86_64 2.0.0-5.fc38 fedora 30 k libpsl x86_64 0.21.2-2.fc38 fedora 65 k librepo x86_64 1.15.1-2.fc38 fedora 96 k libreport-filesystem noarch 2.17.8-1.fc39 fedora 14 k libselinux x86_64 3.5-1.fc39 fedora 87 k libsemanage x86_64 3.5-1.fc39 fedora 120 k libsepol x86_64 3.5-1.fc39 fedora 324 k libsigsegv x86_64 2.14-4.fc38 fedora 27 k libsmartcols x86_64 2.38.1-4.fc38 fedora 64 k libsolv x86_64 0.7.22-4.fc38 fedora 412 k libssh x86_64 0.10.4-4.fc39 fedora 209 k libssh-config noarch 0.10.4-4.fc39 fedora 8.9 k libstdc++ x86_64 13.0.1-0.8.fc39 fedora 852 k libtasn1 x86_64 4.19.0-2.fc38 fedora 74 k libtirpc x86_64 1.3.3-1.fc38 fedora 94 k libunistring x86_64 1.1-3.fc38 fedora 545 k libunistring1.0 x86_64 1.0-1.fc38 fedora 539 k libuuid x86_64 2.38.1-4.fc38 fedora 28 k libverto x86_64 0.3.2-5.fc38 fedora 21 k libxcrypt x86_64 4.4.33-7.fc39 fedora 120 k libxml2 x86_64 2.10.3-3.fc38 fedora 700 k libyaml x86_64 0.2.5-9.fc38 fedora 59 k libzstd x86_64 1.5.4-1.fc39 fedora 302 k lua-libs x86_64 5.4.4-9.fc39 fedora 133 k lz4-libs x86_64 1.9.4-2.fc38 fedora 67 k mpdecimal x86_64 2.5.1-6.fc38 fedora 89 k mpfr x86_64 4.1.1-3.fc38 fedora 600 k ncurses-base noarch 6.4-3.20230114.fc38 fedora 87 k ncurses-libs x86_64 6.4-3.20230114.fc38 fedora 333 k nettle x86_64 3.8-3.fc38 fedora 412 k npth x86_64 1.6-12.fc38 fedora 24 k openldap x86_64 2.6.4-1.fc39 fedora 255 k openssl-libs x86_64 1:3.0.8-1.fc39 fedora 2.1 M p11-kit x86_64 0.24.1-6.fc38 fedora 359 k p11-kit-trust x86_64 0.24.1-6.fc38 fedora 136 k pcre2 x86_64 10.42-1.fc38.1 fedora 234 k pcre2-syntax noarch 10.42-1.fc38.1 fedora 144 k popt x86_64 1.19-2.fc38 fedora 67 k publicsuffix-list-dafsa noarch 20221208-2.fc38 fedora 59 k python-pip-wheel noarch 23.0.1-1.fc39 fedora 1.4 M python-setuptools-wheel noarch 65.5.1-2.fc38 fedora 715 k python3 x86_64 3.11.2-1.fc39 fedora 28 k python3-dateutil noarch 1:2.8.2-6.fc39 fedora 360 k python3-dbus x86_64 1.3.2-2.fc38 fedora 157 k python3-distro noarch 1.8.0-3.fc39 fedora 49 k python3-dnf noarch 4.14.0-2.fc38 fedora 604 k python3-dnf-plugins-core noarch 4.3.1-2.fc38 fedora 277 k python3-gpg x86_64 1.17.1-5.fc39 fedora 295 k python3-hawkey x86_64 0.68.0-2.fc38 fedora 108 k python3-libcomps x86_64 0.1.19-1.fc39 fedora 47 k python3-libdnf x86_64 0.68.0-2.fc38 fedora 823 k python3-libs x86_64 3.11.2-1.fc39 fedora 9.6 M python3-rpm x86_64 4.18.1-1.fc39 fedora 72 k python3-six noarch 1.16.0-9.fc38 fedora 42 k readline x86_64 8.2-3.fc38 fedora 212 k rpm x86_64 4.18.1-1.fc39 fedora 572 k rpm-build-libs x86_64 4.18.1-1.fc39 fedora 94 k rpm-libs x86_64 4.18.1-1.fc39 fedora 312 k rpm-sequoia x86_64 1.3.0-1.fc39 fedora 855 k rpm-sign-libs x86_64 4.18.1-1.fc39 fedora 26 k sed x86_64 4.8-12.fc38 fedora 306 k setup noarch 2.14.3-3.fc39 fedora 152 k shadow-utils x86_64 2:4.13-6.fc39 fedora 1.3 M sqlite-libs x86_64 3.40.1-2.fc38 fedora 666 k systemd-libs x86_64 253.1-4.fc39 fedora 654 k tpm2-tss x86_64 4.0.1-3.fc38 fedora 675 k tzdata noarch 2022g-2.fc38 fedora 716 k xz-libs x86_64 5.4.1-1.fc38 fedora 108 k zchunk-libs x86_64 1.3.0-1.fc39 fedora 51 k zlib x86_64 1.2.13-3.fc38 fedora 95 k Transaction Summary ================================================================================ Install 139 Packages Total download size: 58 M Installed size: 202 M Downloading Packages: (1/139): basesystem-11-15.fc38.noarch.rpm 81 kB/s | 7.0 kB 00:00 (2/139): alternatives-1.21-2.fc38.x86_64.rpm 301 kB/s | 38 kB 00:00 (3/139): bzip2-libs-1.0.8-13.fc38.x86_64.rpm 1.6 MB/s | 41 kB 00:00 (4/139): audit-libs-3.1-2.fc39.x86_64.rpm 763 kB/s | 117 kB 00:00 (5/139): coreutils-9.1-11.fc38.x86_64.rpm 13 MB/s | 1.1 MB 00:00 (6/139): bash-5.2.15-3.fc38.x86_64.rpm 10 MB/s | 1.8 MB 00:00 (7/139): crypto-policies-20230301-1.gita12f7b2. 3.6 MB/s | 93 kB 00:00 (8/139): ca-certificates-2023.2.60-2.fc38.noarc 5.3 MB/s | 845 kB 00:00 (9/139): curl-8.0.1-1.fc39.x86_64.rpm 15 MB/s | 350 kB 00:00 (10/139): coreutils-common-9.1-11.fc38.x86_64.r 25 MB/s | 2.0 MB 00:00 (11/139): dbus-libs-1.14.6-1.fc38.x86_64.rpm 7.5 MB/s | 156 kB 00:00 (12/139): dnf-4.14.0-2.fc38.noarch.rpm 20 MB/s | 478 kB 00:00 (13/139): dnf-data-4.14.0-2.fc38.noarch.rpm 2.0 MB/s | 40 kB 00:00 (14/139): dnf-plugins-core-4.3.1-2.fc38.noarch. 1.7 MB/s | 33 kB 00:00 (15/139): elfutils-default-yama-scope-0.189-1.f 785 kB/s | 15 kB 00:00 (16/139): elfutils-libelf-0.189-1.fc39.x86_64.r 9.3 MB/s | 196 kB 00:00 (17/139): elfutils-libs-0.189-1.fc39.x86_64.rpm 12 MB/s | 260 kB 00:00 (18/139): expat-2.5.0-2.fc38.x86_64.rpm 5.5 MB/s | 110 kB 00:00 (19/139): cyrus-sasl-lib-2.1.28-9.fc38.x86_64.r 7.9 MB/s | 794 kB 00:00 (20/139): fedora-gpg-keys-39-0.1.noarch.rpm 6.1 MB/s | 126 kB 00:00 (21/139): fedora-release-39-0.5.noarch.rpm 635 kB/s | 12 kB 00:00 (22/139): fedora-release-common-39-0.5.noarch.r 1.1 MB/s | 22 kB 00:00 (23/139): fedora-release-identity-basic-39-0.5. 654 kB/s | 13 kB 00:00 (24/139): fedora-repos-39-0.1.noarch.rpm 502 kB/s | 9.4 kB 00:00 (25/139): fedora-repos-rawhide-39-0.1.noarch.rp 477 kB/s | 9.0 kB 00:00 (26/139): file-libs-5.44-3.fc39.x86_64.rpm 18 MB/s | 730 kB 00:00 (27/139): filesystem-3.18-4.fc39.x86_64.rpm 25 MB/s | 1.1 MB 00:00 (28/139): gdbm-libs-1.23-3.fc38.x86_64.rpm 2.4 MB/s | 56 kB 00:00 (29/139): findutils-4.9.0-3.fc38.x86_64.rpm 7.5 MB/s | 492 kB 00:00 (30/139): gawk-5.1.1-5.fc38.x86_64.rpm 21 MB/s | 1.0 MB 00:00 (31/139): glibc-common-2.37.9000-3.fc39.x86_64. 8.7 MB/s | 321 kB 00:00 (32/139): glibc-minimal-langpack-2.37.9000-3.fc 1.5 MB/s | 43 kB 00:00 (33/139): gmp-6.2.1-4.fc38.x86_64.rpm 9.7 MB/s | 313 kB 00:00 (34/139): glib2-2.76.0-1.fc39.x86_64.rpm 21 MB/s | 2.8 MB 00:00 (35/139): gnutls-3.8.0-3.fc39.x86_64.rpm 11 MB/s | 1.1 MB 00:00 (36/139): gpgme-1.17.1-5.fc39.x86_64.rpm 4.0 MB/s | 206 kB 00:00 (37/139): gnupg2-2.4.0-3.fc39.x86_64.rpm 12 MB/s | 2.6 MB 00:00 (38/139): grep-3.9-1.fc39.x86_64.rpm 5.8 MB/s | 295 kB 00:00 (39/139): ima-evm-utils-1.4-7.fc38.x86_64.rpm 2.8 MB/s | 62 kB 00:00 (40/139): json-c-0.16-4.fc38.x86_64.rpm 2.0 MB/s | 41 kB 00:00 (41/139): glibc-2.37.9000-3.fc39.x86_64.rpm 5.8 MB/s | 2.1 MB 00:00 (42/139): keyutils-libs-1.6.1-6.fc38.x86_64.rpm 1.5 MB/s | 31 kB 00:00 (43/139): krb5-libs-1.20.1-9.fc39.x86_64.rpm 24 MB/s | 727 kB 00:00 (44/139): libacl-2.3.1-7.fc39.x86_64.rpm 781 kB/s | 23 kB 00:00 (45/139): libarchive-3.6.1-5.fc39.x86_64.rpm 11 MB/s | 400 kB 00:00 (46/139): libassuan-2.5.5-6.fc38.x86_64.rpm 1.7 MB/s | 67 kB 00:00 (47/139): libattr-2.5.1-7.fc39.x86_64.rpm 456 kB/s | 18 kB 00:00 (48/139): libb2-0.98.1-8.fc38.x86_64.rpm 884 kB/s | 25 kB 00:00 (49/139): libblkid-2.38.1-4.fc38.x86_64.rpm 4.8 MB/s | 106 kB 00:00 (50/139): libcap-2.48-6.fc38.x86_64.rpm 2.7 MB/s | 67 kB 00:00 (51/139): libcap-ng-0.8.3-5.fc38.x86_64.rpm 1.4 MB/s | 32 kB 00:00 (52/139): libbrotli-1.0.9-11.fc38.x86_64.rpm 7.1 MB/s | 317 kB 00:00 (53/139): libcom_err-1.46.5-4.fc38.x86_64.rpm 1.0 MB/s | 26 kB 00:00 (54/139): libcomps-0.1.19-1.fc39.x86_64.rpm 2.2 MB/s | 77 kB 00:00 (55/139): libeconf-0.4.0-5.fc38.x86_64.rpm 809 kB/s | 27 kB 00:00 (56/139): libcurl-8.0.1-1.fc39.x86_64.rpm 4.8 MB/s | 313 kB 00:00 (57/139): libdnf-0.68.0-2.fc38.x86_64.rpm 9.9 MB/s | 662 kB 00:00 (58/139): libevent-2.1.12-8.fc38.x86_64.rpm 8.1 MB/s | 257 kB 00:00 (59/139): libffi-3.4.4-2.fc38.x86_64.rpm 1.2 MB/s | 38 kB 00:00 (60/139): libfsverity-1.4-9.fc38.x86_64.rpm 763 kB/s | 19 kB 00:00 (61/139): libgcc-13.0.1-0.8.fc39.x86_64.rpm 5.0 MB/s | 102 kB 00:00 (62/139): libgomp-13.0.1-0.8.fc39.x86_64.rpm 13 MB/s | 310 kB 00:00 (63/139): libgpg-error-1.46-2.fc38.x86_64.rpm 11 MB/s | 228 kB 00:00 (64/139): libgcrypt-1.10.1-7.fc38.x86_64.rpm 10 MB/s | 511 kB 00:00 (65/139): libidn2-2.3.4-2.fc38.x86_64.rpm 7.5 MB/s | 160 kB 00:00 (66/139): libksba-1.6.3-2.fc38.x86_64.rpm 7.7 MB/s | 159 kB 00:00 (67/139): libmodulemd-2.14.0-5.fc38.x86_64.rpm 10 MB/s | 233 kB 00:00 (68/139): libmount-2.38.1-4.fc38.x86_64.rpm 6.2 MB/s | 135 kB 00:00 (69/139): libnghttp2-1.52.0-1.fc39.x86_64.rpm 3.6 MB/s | 75 kB 00:00 (70/139): libnsl2-2.0.0-5.fc38.x86_64.rpm 1.5 MB/s | 30 kB 00:00 (71/139): libpsl-0.21.2-2.fc38.x86_64.rpm 3.2 MB/s | 65 kB 00:00 (72/139): librepo-1.15.1-2.fc38.x86_64.rpm 4.7 MB/s | 96 kB 00:00 (73/139): libreport-filesystem-2.17.8-1.fc39.no 756 kB/s | 14 kB 00:00 (74/139): libselinux-3.5-1.fc39.x86_64.rpm 4.2 MB/s | 87 kB 00:00 (75/139): libsemanage-3.5-1.fc39.x86_64.rpm 5.7 MB/s | 120 kB 00:00 (76/139): libsepol-3.5-1.fc39.x86_64.rpm 13 MB/s | 324 kB 00:00 (77/139): libsigsegv-2.14-4.fc38.x86_64.rpm 1.1 MB/s | 27 kB 00:00 (78/139): libsmartcols-2.38.1-4.fc38.x86_64.rpm 3.2 MB/s | 64 kB 00:00 (79/139): libssh-0.10.4-4.fc39.x86_64.rpm 7.3 MB/s | 209 kB 00:00 (80/139): libssh-config-0.10.4-4.fc39.noarch.rp 318 kB/s | 8.9 kB 00:00 (81/139): libsolv-0.7.22-4.fc38.x86_64.rpm 9.3 MB/s | 412 kB 00:00 (82/139): libtasn1-4.19.0-2.fc38.x86_64.rpm 3.7 MB/s | 74 kB 00:00 (83/139): libtirpc-1.3.3-1.fc38.x86_64.rpm 4.6 MB/s | 94 kB 00:00 (84/139): libstdc++-13.0.1-0.8.fc39.x86_64.rpm 19 MB/s | 852 kB 00:00 (85/139): libunistring-1.1-3.fc38.x86_64.rpm 20 MB/s | 545 kB 00:00 (86/139): libuuid-2.38.1-4.fc38.x86_64.rpm 1.3 MB/s | 28 kB 00:00 (87/139): libverto-0.3.2-5.fc38.x86_64.rpm 1.1 MB/s | 21 kB 00:00 (88/139): libunistring1.0-1.0-1.fc38.x86_64.rpm 12 MB/s | 539 kB 00:00 (89/139): libxcrypt-4.4.33-7.fc39.x86_64.rpm 5.7 MB/s | 120 kB 00:00 (90/139): libxml2-2.10.3-3.fc38.x86_64.rpm 26 MB/s | 700 kB 00:00 (91/139): libyaml-0.2.5-9.fc38.x86_64.rpm 2.6 MB/s | 59 kB 00:00 (92/139): libzstd-1.5.4-1.fc39.x86_64.rpm 11 MB/s | 302 kB 00:00 (93/139): lua-libs-5.4.4-9.fc39.x86_64.rpm 6.3 MB/s | 133 kB 00:00 (94/139): lz4-libs-1.9.4-2.fc38.x86_64.rpm 3.1 MB/s | 67 kB 00:00 (95/139): mpdecimal-2.5.1-6.fc38.x86_64.rpm 4.2 MB/s | 89 kB 00:00 (96/139): mpfr-4.1.1-3.fc38.x86_64.rpm 14 MB/s | 600 kB 00:00 (97/139): ncurses-base-6.4-3.20230114.fc38.noar 1.9 MB/s | 87 kB 00:00 (98/139): ncurses-libs-6.4-3.20230114.fc38.x86_ 8.4 MB/s | 333 kB 00:00 (99/139): nettle-3.8-3.fc38.x86_64.rpm 16 MB/s | 412 kB 00:00 (100/139): npth-1.6-12.fc38.x86_64.rpm 940 kB/s | 24 kB 00:00 (101/139): openldap-2.6.4-1.fc39.x86_64.rpm 10 MB/s | 255 kB 00:00 (102/139): p11-kit-0.24.1-6.fc38.x86_64.rpm 11 MB/s | 359 kB 00:00 (103/139): p11-kit-trust-0.24.1-6.fc38.x86_64.r 4.4 MB/s | 136 kB 00:00 (104/139): pcre2-syntax-10.42-1.fc38.1.noarch.r 6.9 MB/s | 144 kB 00:00 (105/139): pcre2-10.42-1.fc38.1.x86_64.rpm 9.7 MB/s | 234 kB 00:00 (106/139): openssl-libs-3.0.8-1.fc39.x86_64.rpm 34 MB/s | 2.1 MB 00:00 (107/139): popt-1.19-2.fc38.x86_64.rpm 3.3 MB/s | 67 kB 00:00 (108/139): publicsuffix-list-dafsa-20221208-2.f 3.0 MB/s | 59 kB 00:00 (109/139): python3-3.11.2-1.fc39.x86_64.rpm 1.2 MB/s | 28 kB 00:00 (110/139): python-pip-wheel-23.0.1-1.fc39.noarc 26 MB/s | 1.4 MB 00:00 (111/139): python-setuptools-wheel-65.5.1-2.fc3 14 MB/s | 715 kB 00:00 (112/139): python3-dateutil-2.8.2-6.fc39.noarch 12 MB/s | 360 kB 00:00 (113/139): python3-dbus-1.3.2-2.fc38.x86_64.rpm 7.6 MB/s | 157 kB 00:00 (114/139): python3-distro-1.8.0-3.fc39.noarch.r 2.5 MB/s | 49 kB 00:00 (115/139): python3-dnf-plugins-core-4.3.1-2.fc3 12 MB/s | 277 kB 00:00 (116/139): python3-gpg-1.17.1-5.fc39.x86_64.rpm 13 MB/s | 295 kB 00:00 (117/139): python3-dnf-4.14.0-2.fc38.noarch.rpm 14 MB/s | 604 kB 00:00 (118/139): python3-hawkey-0.68.0-2.fc38.x86_64. 5.0 MB/s | 108 kB 00:00 (119/139): python3-libcomps-0.1.19-1.fc39.x86_6 2.2 MB/s | 47 kB 00:00 (120/139): python3-rpm-4.18.1-1.fc39.x86_64.rpm 3.1 MB/s | 72 kB 00:00 (121/139): python3-libdnf-0.68.0-2.fc38.x86_64. 11 MB/s | 823 kB 00:00 (122/139): python3-six-1.16.0-9.fc38.noarch.rpm 1.3 MB/s | 42 kB 00:00 (123/139): readline-8.2-3.fc38.x86_64.rpm 8.7 MB/s | 212 kB 00:00 (124/139): rpm-4.18.1-1.fc39.x86_64.rpm 12 MB/s | 572 kB 00:00 (125/139): rpm-build-libs-4.18.1-1.fc39.x86_64. 3.8 MB/s | 94 kB 00:00 (126/139): rpm-libs-4.18.1-1.fc39.x86_64.rpm 14 MB/s | 312 kB 00:00 (127/139): rpm-sign-libs-4.18.1-1.fc39.x86_64.r 1.3 MB/s | 26 kB 00:00 (128/139): sed-4.8-12.fc38.x86_64.rpm 12 MB/s | 306 kB 00:00 (129/139): rpm-sequoia-1.3.0-1.fc39.x86_64.rpm 13 MB/s | 855 kB 00:00 (130/139): python3-libs-3.11.2-1.fc39.x86_64.rp 48 MB/s | 9.6 MB 00:00 (131/139): setup-2.14.3-3.fc39.noarch.rpm 5.5 MB/s | 152 kB 00:00 (132/139): sqlite-libs-3.40.1-2.fc38.x86_64.rpm 20 MB/s | 666 kB 00:00 (133/139): shadow-utils-4.13-6.fc39.x86_64.rpm 19 MB/s | 1.3 MB 00:00 (134/139): systemd-libs-253.1-4.fc39.x86_64.rpm 10 MB/s | 654 kB 00:00 (135/139): tpm2-tss-4.0.1-3.fc38.x86_64.rpm 21 MB/s | 675 kB 00:00 (136/139): xz-libs-5.4.1-1.fc38.x86_64.rpm 5.2 MB/s | 108 kB 00:00 (137/139): zchunk-libs-1.3.0-1.fc39.x86_64.rpm 2.5 MB/s | 51 kB 00:00 (138/139): tzdata-2022g-2.fc38.noarch.rpm 15 MB/s | 716 kB 00:00 (139/139): zlib-1.2.13-3.fc38.x86_64.rpm 4.7 MB/s | 95 kB 00:00 -------------------------------------------------------------------------------- Total 29 MB/s | 58 MB 00:01 fedora 1.6 MB/s | 1.6 kB 00:00 Importing GPG key 0x18B8E74C: Userid : "Fedora (39) " Fingerprint: E8F2 3996 F232 1864 0CB4 4CBE 75CF 5AC4 18B8 E74C From : /usr/share/distribution-gpg-keys/fedora/RPM-GPG-KEY-fedora-39-primary Key imported successfully fedora 1.6 MB/s | 1.6 kB 00:00 GPG key at file:///usr/share/distribution-gpg-keys/fedora/RPM-GPG-KEY-fedora-39-primary (0x18B8E74C) is already installed fedora 1.6 MB/s | 1.6 kB 00:00 Importing GPG key 0xEB10B464: Userid : "Fedora (38) " Fingerprint: 6A51 BBAB BA3D 5467 B617 1221 809A 8D7C EB10 B464 From : /usr/share/distribution-gpg-keys/fedora/RPM-GPG-KEY-fedora-38-primary Key imported successfully Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Running scriptlet: filesystem-3.18-4.fc39.x86_64 1/1 Preparing : 1/1 Installing : libgcc-13.0.1-0.8.fc39.x86_64 1/139 Running scriptlet: libgcc-13.0.1-0.8.fc39.x86_64 1/139 Installing : tzdata-2022g-2.fc38.noarch 2/139 Installing : crypto-policies-20230301-1.gita12f7b2.fc39.noarc 3/139 Running scriptlet: crypto-policies-20230301-1.gita12f7b2.fc39.noarc 3/139 Installing : fedora-release-identity-basic-39-0.5.noarch 4/139 Installing : python-setuptools-wheel-65.5.1-2.fc38.noarch 5/139 Installing : publicsuffix-list-dafsa-20221208-2.fc38.noarch 6/139 Installing : pcre2-syntax-10.42-1.fc38.1.noarch 7/139 Installing : ncurses-base-6.4-3.20230114.fc38.noarch 8/139 Installing : libssh-config-0.10.4-4.fc39.noarch 9/139 Installing : libreport-filesystem-2.17.8-1.fc39.noarch 10/139 Installing : dnf-data-4.14.0-2.fc38.noarch 11/139 warning: /etc/dnf/dnf.conf created as /etc/dnf/dnf.conf.rpmnew Installing : fedora-gpg-keys-39-0.1.noarch 12/139 Installing : fedora-release-39-0.5.noarch 13/139 Installing : fedora-release-common-39-0.5.noarch 14/139 Installing : fedora-repos-rawhide-39-0.1.noarch 15/139 Installing : fedora-repos-39-0.1.noarch 16/139 Installing : setup-2.14.3-3.fc39.noarch 17/139 Running scriptlet: setup-2.14.3-3.fc39.noarch 17/139 Installing : filesystem-3.18-4.fc39.x86_64 18/139 Installing : basesystem-11-15.fc38.noarch 19/139 Installing : glibc-minimal-langpack-2.37.9000-3.fc39.x86_64 20/139 Installing : glibc-common-2.37.9000-3.fc39.x86_64 21/139 Running scriptlet: glibc-2.37.9000-3.fc39.x86_64 22/139 Installing : glibc-2.37.9000-3.fc39.x86_64 22/139 Running scriptlet: glibc-2.37.9000-3.fc39.x86_64 22/139 Installing : ncurses-libs-6.4-3.20230114.fc38.x86_64 23/139 Installing : bash-5.2.15-3.fc38.x86_64 24/139 Running scriptlet: bash-5.2.15-3.fc38.x86_64 24/139 Installing : zlib-1.2.13-3.fc38.x86_64 25/139 Installing : bzip2-libs-1.0.8-13.fc38.x86_64 26/139 Installing : libzstd-1.5.4-1.fc39.x86_64 27/139 Installing : xz-libs-5.4.1-1.fc38.x86_64 28/139 Installing : sqlite-libs-3.40.1-2.fc38.x86_64 29/139 Installing : libcap-2.48-6.fc38.x86_64 30/139 Installing : gmp-1:6.2.1-4.fc38.x86_64 31/139 Installing : libgpg-error-1.46-2.fc38.x86_64 32/139 Installing : popt-1.19-2.fc38.x86_64 33/139 Installing : libxml2-2.10.3-3.fc38.x86_64 34/139 Installing : libuuid-2.38.1-4.fc38.x86_64 35/139 Installing : lua-libs-5.4.4-9.fc39.x86_64 36/139 Installing : elfutils-libelf-0.189-1.fc39.x86_64 37/139 Installing : file-libs-5.44-3.fc39.x86_64 38/139 Installing : readline-8.2-3.fc38.x86_64 39/139 Installing : libattr-2.5.1-7.fc39.x86_64 40/139 Installing : libacl-2.3.1-7.fc39.x86_64 41/139 Installing : libffi-3.4.4-2.fc38.x86_64 42/139 Installing : p11-kit-0.24.1-6.fc38.x86_64 43/139 Installing : libstdc++-13.0.1-0.8.fc39.x86_64 44/139 Installing : libxcrypt-4.4.33-7.fc39.x86_64 45/139 Installing : pcre2-10.42-1.fc38.1.x86_64 46/139 Installing : libassuan-2.5.5-6.fc38.x86_64 47/139 Installing : expat-2.5.0-2.fc38.x86_64 48/139 Installing : gdbm-libs-1:1.23-3.fc38.x86_64 49/139 Installing : json-c-0.16-4.fc38.x86_64 50/139 Installing : keyutils-libs-1.6.1-6.fc38.x86_64 51/139 Installing : libcom_err-1.46.5-4.fc38.x86_64 52/139 Installing : libgomp-13.0.1-0.8.fc39.x86_64 53/139 Installing : libsepol-3.5-1.fc39.x86_64 54/139 Installing : libselinux-3.5-1.fc39.x86_64 55/139 Installing : sed-4.8-12.fc38.x86_64 56/139 Installing : libsmartcols-2.38.1-4.fc38.x86_64 57/139 Installing : libtasn1-4.19.0-2.fc38.x86_64 58/139 Installing : libunistring1.0-1.0-1.fc38.x86_64 59/139 Installing : libidn2-2.3.4-2.fc38.x86_64 60/139 Installing : lz4-libs-1.9.4-2.fc38.x86_64 61/139 Installing : systemd-libs-253.1-4.fc39.x86_64 62/139 Installing : dbus-libs-1:1.14.6-1.fc38.x86_64 63/139 Installing : libpsl-0.21.2-2.fc38.x86_64 64/139 Installing : findutils-1:4.9.0-3.fc38.x86_64 65/139 Installing : libb2-0.98.1-8.fc38.x86_64 66/139 Installing : cyrus-sasl-lib-2.1.28-9.fc38.x86_64 67/139 Installing : libcomps-0.1.19-1.fc39.x86_64 68/139 Installing : grep-3.9-1.fc39.x86_64 69/139 Installing : libblkid-2.38.1-4.fc38.x86_64 70/139 Installing : libmount-2.38.1-4.fc38.x86_64 71/139 Installing : libgcrypt-1.10.1-7.fc38.x86_64 72/139 Installing : libksba-1.6.3-2.fc38.x86_64 73/139 Installing : mpfr-4.1.1-3.fc38.x86_64 74/139 Installing : nettle-3.8-3.fc38.x86_64 75/139 Installing : elfutils-default-yama-scope-0.189-1.fc39.noarch 76/139 Running scriptlet: elfutils-default-yama-scope-0.189-1.fc39.noarch 76/139 Installing : elfutils-libs-0.189-1.fc39.x86_64 77/139 Installing : alternatives-1.21-2.fc38.x86_64 78/139 Installing : p11-kit-trust-0.24.1-6.fc38.x86_64 79/139 Running scriptlet: p11-kit-trust-0.24.1-6.fc38.x86_64 79/139 Installing : libbrotli-1.0.9-11.fc38.x86_64 80/139 Installing : libcap-ng-0.8.3-5.fc38.x86_64 81/139 Installing : audit-libs-3.1-2.fc39.x86_64 82/139 Installing : libsemanage-3.5-1.fc39.x86_64 83/139 Installing : libeconf-0.4.0-5.fc38.x86_64 84/139 Installing : shadow-utils-2:4.13-6.fc39.x86_64 85/139 Installing : libnghttp2-1.52.0-1.fc39.x86_64 86/139 Installing : libsigsegv-2.14-4.fc38.x86_64 87/139 Installing : gawk-5.1.1-5.fc38.x86_64 88/139 Installing : libunistring-1.1-3.fc38.x86_64 89/139 Installing : gnutls-3.8.0-3.fc39.x86_64 90/139 Installing : glib2-2.76.0-1.fc39.x86_64 91/139 Installing : libverto-0.3.2-5.fc38.x86_64 92/139 Installing : libyaml-0.2.5-9.fc38.x86_64 93/139 Installing : mpdecimal-2.5.1-6.fc38.x86_64 94/139 Installing : npth-1.6-12.fc38.x86_64 95/139 Installing : coreutils-common-9.1-11.fc38.x86_64 96/139 Installing : openssl-libs-1:3.0.8-1.fc39.x86_64 97/139 Installing : coreutils-9.1-11.fc38.x86_64 98/139 Running scriptlet: ca-certificates-2023.2.60-2.fc38.noarch 99/139 Installing : ca-certificates-2023.2.60-2.fc38.noarch 99/139 Running scriptlet: ca-certificates-2023.2.60-2.fc38.noarch 99/139 Installing : rpm-sequoia-1.3.0-1.fc39.x86_64 100/139 Installing : rpm-libs-4.18.1-1.fc39.x86_64 101/139 Installing : krb5-libs-1.20.1-9.fc39.x86_64 102/139 Installing : libtirpc-1.3.3-1.fc38.x86_64 103/139 Installing : libmodulemd-2.14.0-5.fc38.x86_64 104/139 Installing : libfsverity-1.4-9.fc38.x86_64 105/139 Installing : zchunk-libs-1.3.0-1.fc39.x86_64 106/139 Installing : libsolv-0.7.22-4.fc38.x86_64 107/139 Installing : libnsl2-2.0.0-5.fc38.x86_64 108/139 Installing : libssh-0.10.4-4.fc39.x86_64 109/139 Installing : rpm-build-libs-4.18.1-1.fc39.x86_64 110/139 Installing : python-pip-wheel-23.0.1-1.fc39.noarch 111/139 Installing : python3-3.11.2-1.fc39.x86_64 112/139 Installing : python3-libs-3.11.2-1.fc39.x86_64 113/139 Installing : python3-dbus-1.3.2-2.fc38.x86_64 114/139 Installing : python3-libcomps-0.1.19-1.fc39.x86_64 115/139 Installing : python3-distro-1.8.0-3.fc39.noarch 116/139 Installing : python3-six-1.16.0-9.fc38.noarch 117/139 Installing : python3-dateutil-1:2.8.2-6.fc39.noarch 118/139 Installing : libarchive-3.6.1-5.fc39.x86_64 119/139 Installing : libevent-2.1.12-8.fc38.x86_64 120/139 Installing : openldap-2.6.4-1.fc39.x86_64 121/139 Installing : libcurl-8.0.1-1.fc39.x86_64 122/139 Installing : gnupg2-2.4.0-3.fc39.x86_64 123/139 Installing : gpgme-1.17.1-5.fc39.x86_64 124/139 Installing : librepo-1.15.1-2.fc38.x86_64 125/139 Installing : libdnf-0.68.0-2.fc38.x86_64 126/139 Installing : python3-libdnf-0.68.0-2.fc38.x86_64 127/139 Installing : python3-hawkey-0.68.0-2.fc38.x86_64 128/139 Installing : python3-gpg-1.17.1-5.fc39.x86_64 129/139 Installing : curl-8.0.1-1.fc39.x86_64 130/139 Running scriptlet: tpm2-tss-4.0.1-3.fc38.x86_64 131/139 useradd: Warning: missing or non-executable shell '/usr/sbin/nologin' Installing : tpm2-tss-4.0.1-3.fc38.x86_64 131/139 Installing : ima-evm-utils-1.4-7.fc38.x86_64 132/139 Installing : rpm-sign-libs-4.18.1-1.fc39.x86_64 133/139 Installing : python3-rpm-4.18.1-1.fc39.x86_64 134/139 Installing : python3-dnf-4.14.0-2.fc38.noarch 135/139 Installing : python3-dnf-plugins-core-4.3.1-2.fc38.noarch 136/139 Installing : dnf-plugins-core-4.3.1-2.fc38.noarch 137/139 Installing : dnf-4.14.0-2.fc38.noarch 138/139 Running scriptlet: dnf-4.14.0-2.fc38.noarch 138/139 Running scriptlet: rpm-4.18.1-1.fc39.x86_64 139/139 Installing : rpm-4.18.1-1.fc39.x86_64 139/139 Running scriptlet: filesystem-3.18-4.fc39.x86_64 139/139 Running scriptlet: ca-certificates-2023.2.60-2.fc38.noarch 139/139 Running scriptlet: rpm-4.18.1-1.fc39.x86_64 139/139 Verifying : alternatives-1.21-2.fc38.x86_64 1/139 Verifying : audit-libs-3.1-2.fc39.x86_64 2/139 Verifying : basesystem-11-15.fc38.noarch 3/139 Verifying : bash-5.2.15-3.fc38.x86_64 4/139 Verifying : bzip2-libs-1.0.8-13.fc38.x86_64 5/139 Verifying : ca-certificates-2023.2.60-2.fc38.noarch 6/139 Verifying : coreutils-9.1-11.fc38.x86_64 7/139 Verifying : coreutils-common-9.1-11.fc38.x86_64 8/139 Verifying : crypto-policies-20230301-1.gita12f7b2.fc39.noarc 9/139 Verifying : curl-8.0.1-1.fc39.x86_64 10/139 Verifying : cyrus-sasl-lib-2.1.28-9.fc38.x86_64 11/139 Verifying : dbus-libs-1:1.14.6-1.fc38.x86_64 12/139 Verifying : dnf-4.14.0-2.fc38.noarch 13/139 Verifying : dnf-data-4.14.0-2.fc38.noarch 14/139 Verifying : dnf-plugins-core-4.3.1-2.fc38.noarch 15/139 Verifying : elfutils-default-yama-scope-0.189-1.fc39.noarch 16/139 Verifying : elfutils-libelf-0.189-1.fc39.x86_64 17/139 Verifying : elfutils-libs-0.189-1.fc39.x86_64 18/139 Verifying : expat-2.5.0-2.fc38.x86_64 19/139 Verifying : fedora-gpg-keys-39-0.1.noarch 20/139 Verifying : fedora-release-39-0.5.noarch 21/139 Verifying : fedora-release-common-39-0.5.noarch 22/139 Verifying : fedora-release-identity-basic-39-0.5.noarch 23/139 Verifying : fedora-repos-39-0.1.noarch 24/139 Verifying : fedora-repos-rawhide-39-0.1.noarch 25/139 Verifying : file-libs-5.44-3.fc39.x86_64 26/139 Verifying : filesystem-3.18-4.fc39.x86_64 27/139 Verifying : findutils-1:4.9.0-3.fc38.x86_64 28/139 Verifying : gawk-5.1.1-5.fc38.x86_64 29/139 Verifying : gdbm-libs-1:1.23-3.fc38.x86_64 30/139 Verifying : glib2-2.76.0-1.fc39.x86_64 31/139 Verifying : glibc-2.37.9000-3.fc39.x86_64 32/139 Verifying : glibc-common-2.37.9000-3.fc39.x86_64 33/139 Verifying : glibc-minimal-langpack-2.37.9000-3.fc39.x86_64 34/139 Verifying : gmp-1:6.2.1-4.fc38.x86_64 35/139 Verifying : gnupg2-2.4.0-3.fc39.x86_64 36/139 Verifying : gnutls-3.8.0-3.fc39.x86_64 37/139 Verifying : gpgme-1.17.1-5.fc39.x86_64 38/139 Verifying : grep-3.9-1.fc39.x86_64 39/139 Verifying : ima-evm-utils-1.4-7.fc38.x86_64 40/139 Verifying : json-c-0.16-4.fc38.x86_64 41/139 Verifying : keyutils-libs-1.6.1-6.fc38.x86_64 42/139 Verifying : krb5-libs-1.20.1-9.fc39.x86_64 43/139 Verifying : libacl-2.3.1-7.fc39.x86_64 44/139 Verifying : libarchive-3.6.1-5.fc39.x86_64 45/139 Verifying : libassuan-2.5.5-6.fc38.x86_64 46/139 Verifying : libattr-2.5.1-7.fc39.x86_64 47/139 Verifying : libb2-0.98.1-8.fc38.x86_64 48/139 Verifying : libblkid-2.38.1-4.fc38.x86_64 49/139 Verifying : libbrotli-1.0.9-11.fc38.x86_64 50/139 Verifying : libcap-2.48-6.fc38.x86_64 51/139 Verifying : libcap-ng-0.8.3-5.fc38.x86_64 52/139 Verifying : libcom_err-1.46.5-4.fc38.x86_64 53/139 Verifying : libcomps-0.1.19-1.fc39.x86_64 54/139 Verifying : libcurl-8.0.1-1.fc39.x86_64 55/139 Verifying : libdnf-0.68.0-2.fc38.x86_64 56/139 Verifying : libeconf-0.4.0-5.fc38.x86_64 57/139 Verifying : libevent-2.1.12-8.fc38.x86_64 58/139 Verifying : libffi-3.4.4-2.fc38.x86_64 59/139 Verifying : libfsverity-1.4-9.fc38.x86_64 60/139 Verifying : libgcc-13.0.1-0.8.fc39.x86_64 61/139 Verifying : libgcrypt-1.10.1-7.fc38.x86_64 62/139 Verifying : libgomp-13.0.1-0.8.fc39.x86_64 63/139 Verifying : libgpg-error-1.46-2.fc38.x86_64 64/139 Verifying : libidn2-2.3.4-2.fc38.x86_64 65/139 Verifying : libksba-1.6.3-2.fc38.x86_64 66/139 Verifying : libmodulemd-2.14.0-5.fc38.x86_64 67/139 Verifying : libmount-2.38.1-4.fc38.x86_64 68/139 Verifying : libnghttp2-1.52.0-1.fc39.x86_64 69/139 Verifying : libnsl2-2.0.0-5.fc38.x86_64 70/139 Verifying : libpsl-0.21.2-2.fc38.x86_64 71/139 Verifying : librepo-1.15.1-2.fc38.x86_64 72/139 Verifying : libreport-filesystem-2.17.8-1.fc39.noarch 73/139 Verifying : libselinux-3.5-1.fc39.x86_64 74/139 Verifying : libsemanage-3.5-1.fc39.x86_64 75/139 Verifying : libsepol-3.5-1.fc39.x86_64 76/139 Verifying : libsigsegv-2.14-4.fc38.x86_64 77/139 Verifying : libsmartcols-2.38.1-4.fc38.x86_64 78/139 Verifying : libsolv-0.7.22-4.fc38.x86_64 79/139 Verifying : libssh-0.10.4-4.fc39.x86_64 80/139 Verifying : libssh-config-0.10.4-4.fc39.noarch 81/139 Verifying : libstdc++-13.0.1-0.8.fc39.x86_64 82/139 Verifying : libtasn1-4.19.0-2.fc38.x86_64 83/139 Verifying : libtirpc-1.3.3-1.fc38.x86_64 84/139 Verifying : libunistring-1.1-3.fc38.x86_64 85/139 Verifying : libunistring1.0-1.0-1.fc38.x86_64 86/139 Verifying : libuuid-2.38.1-4.fc38.x86_64 87/139 Verifying : libverto-0.3.2-5.fc38.x86_64 88/139 Verifying : libxcrypt-4.4.33-7.fc39.x86_64 89/139 Verifying : libxml2-2.10.3-3.fc38.x86_64 90/139 Verifying : libyaml-0.2.5-9.fc38.x86_64 91/139 Verifying : libzstd-1.5.4-1.fc39.x86_64 92/139 Verifying : lua-libs-5.4.4-9.fc39.x86_64 93/139 Verifying : lz4-libs-1.9.4-2.fc38.x86_64 94/139 Verifying : mpdecimal-2.5.1-6.fc38.x86_64 95/139 Verifying : mpfr-4.1.1-3.fc38.x86_64 96/139 Verifying : ncurses-base-6.4-3.20230114.fc38.noarch 97/139 Verifying : ncurses-libs-6.4-3.20230114.fc38.x86_64 98/139 Verifying : nettle-3.8-3.fc38.x86_64 99/139 Verifying : npth-1.6-12.fc38.x86_64 100/139 Verifying : openldap-2.6.4-1.fc39.x86_64 101/139 Verifying : openssl-libs-1:3.0.8-1.fc39.x86_64 102/139 Verifying : p11-kit-0.24.1-6.fc38.x86_64 103/139 Verifying : p11-kit-trust-0.24.1-6.fc38.x86_64 104/139 Verifying : pcre2-10.42-1.fc38.1.x86_64 105/139 Verifying : pcre2-syntax-10.42-1.fc38.1.noarch 106/139 Verifying : popt-1.19-2.fc38.x86_64 107/139 Verifying : publicsuffix-list-dafsa-20221208-2.fc38.noarch 108/139 Verifying : python-pip-wheel-23.0.1-1.fc39.noarch 109/139 Verifying : python-setuptools-wheel-65.5.1-2.fc38.noarch 110/139 Verifying : python3-3.11.2-1.fc39.x86_64 111/139 Verifying : python3-dateutil-1:2.8.2-6.fc39.noarch 112/139 Verifying : python3-dbus-1.3.2-2.fc38.x86_64 113/139 Verifying : python3-distro-1.8.0-3.fc39.noarch 114/139 Verifying : python3-dnf-4.14.0-2.fc38.noarch 115/139 Verifying : python3-dnf-plugins-core-4.3.1-2.fc38.noarch 116/139 Verifying : python3-gpg-1.17.1-5.fc39.x86_64 117/139 Verifying : python3-hawkey-0.68.0-2.fc38.x86_64 118/139 Verifying : python3-libcomps-0.1.19-1.fc39.x86_64 119/139 Verifying : python3-libdnf-0.68.0-2.fc38.x86_64 120/139 Verifying : python3-libs-3.11.2-1.fc39.x86_64 121/139 Verifying : python3-rpm-4.18.1-1.fc39.x86_64 122/139 Verifying : python3-six-1.16.0-9.fc38.noarch 123/139 Verifying : readline-8.2-3.fc38.x86_64 124/139 Verifying : rpm-4.18.1-1.fc39.x86_64 125/139 Verifying : rpm-build-libs-4.18.1-1.fc39.x86_64 126/139 Verifying : rpm-libs-4.18.1-1.fc39.x86_64 127/139 Verifying : rpm-sequoia-1.3.0-1.fc39.x86_64 128/139 Verifying : rpm-sign-libs-4.18.1-1.fc39.x86_64 129/139 Verifying : sed-4.8-12.fc38.x86_64 130/139 Verifying : setup-2.14.3-3.fc39.noarch 131/139 Verifying : shadow-utils-2:4.13-6.fc39.x86_64 132/139 Verifying : sqlite-libs-3.40.1-2.fc38.x86_64 133/139 Verifying : systemd-libs-253.1-4.fc39.x86_64 134/139 Verifying : tpm2-tss-4.0.1-3.fc38.x86_64 135/139 Verifying : tzdata-2022g-2.fc38.noarch 136/139 Verifying : xz-libs-5.4.1-1.fc38.x86_64 137/139 Verifying : zchunk-libs-1.3.0-1.fc39.x86_64 138/139 Verifying : zlib-1.2.13-3.fc38.x86_64 139/139 Installed products updated. Installed: alternatives-1.21-2.fc38.x86_64 audit-libs-3.1-2.fc39.x86_64 basesystem-11-15.fc38.noarch bash-5.2.15-3.fc38.x86_64 bzip2-libs-1.0.8-13.fc38.x86_64 ca-certificates-2023.2.60-2.fc38.noarch coreutils-9.1-11.fc38.x86_64 coreutils-common-9.1-11.fc38.x86_64 crypto-policies-20230301-1.gita12f7b2.fc39.noarch curl-8.0.1-1.fc39.x86_64 cyrus-sasl-lib-2.1.28-9.fc38.x86_64 dbus-libs-1:1.14.6-1.fc38.x86_64 dnf-4.14.0-2.fc38.noarch dnf-data-4.14.0-2.fc38.noarch dnf-plugins-core-4.3.1-2.fc38.noarch elfutils-default-yama-scope-0.189-1.fc39.noarch elfutils-libelf-0.189-1.fc39.x86_64 elfutils-libs-0.189-1.fc39.x86_64 expat-2.5.0-2.fc38.x86_64 fedora-gpg-keys-39-0.1.noarch fedora-release-39-0.5.noarch fedora-release-common-39-0.5.noarch fedora-release-identity-basic-39-0.5.noarch fedora-repos-39-0.1.noarch fedora-repos-rawhide-39-0.1.noarch file-libs-5.44-3.fc39.x86_64 filesystem-3.18-4.fc39.x86_64 findutils-1:4.9.0-3.fc38.x86_64 gawk-5.1.1-5.fc38.x86_64 gdbm-libs-1:1.23-3.fc38.x86_64 glib2-2.76.0-1.fc39.x86_64 glibc-2.37.9000-3.fc39.x86_64 glibc-common-2.37.9000-3.fc39.x86_64 glibc-minimal-langpack-2.37.9000-3.fc39.x86_64 gmp-1:6.2.1-4.fc38.x86_64 gnupg2-2.4.0-3.fc39.x86_64 gnutls-3.8.0-3.fc39.x86_64 gpgme-1.17.1-5.fc39.x86_64 grep-3.9-1.fc39.x86_64 ima-evm-utils-1.4-7.fc38.x86_64 json-c-0.16-4.fc38.x86_64 keyutils-libs-1.6.1-6.fc38.x86_64 krb5-libs-1.20.1-9.fc39.x86_64 libacl-2.3.1-7.fc39.x86_64 libarchive-3.6.1-5.fc39.x86_64 libassuan-2.5.5-6.fc38.x86_64 libattr-2.5.1-7.fc39.x86_64 libb2-0.98.1-8.fc38.x86_64 libblkid-2.38.1-4.fc38.x86_64 libbrotli-1.0.9-11.fc38.x86_64 libcap-2.48-6.fc38.x86_64 libcap-ng-0.8.3-5.fc38.x86_64 libcom_err-1.46.5-4.fc38.x86_64 libcomps-0.1.19-1.fc39.x86_64 libcurl-8.0.1-1.fc39.x86_64 libdnf-0.68.0-2.fc38.x86_64 libeconf-0.4.0-5.fc38.x86_64 libevent-2.1.12-8.fc38.x86_64 libffi-3.4.4-2.fc38.x86_64 libfsverity-1.4-9.fc38.x86_64 libgcc-13.0.1-0.8.fc39.x86_64 libgcrypt-1.10.1-7.fc38.x86_64 libgomp-13.0.1-0.8.fc39.x86_64 libgpg-error-1.46-2.fc38.x86_64 libidn2-2.3.4-2.fc38.x86_64 libksba-1.6.3-2.fc38.x86_64 libmodulemd-2.14.0-5.fc38.x86_64 libmount-2.38.1-4.fc38.x86_64 libnghttp2-1.52.0-1.fc39.x86_64 libnsl2-2.0.0-5.fc38.x86_64 libpsl-0.21.2-2.fc38.x86_64 librepo-1.15.1-2.fc38.x86_64 libreport-filesystem-2.17.8-1.fc39.noarch libselinux-3.5-1.fc39.x86_64 libsemanage-3.5-1.fc39.x86_64 libsepol-3.5-1.fc39.x86_64 libsigsegv-2.14-4.fc38.x86_64 libsmartcols-2.38.1-4.fc38.x86_64 libsolv-0.7.22-4.fc38.x86_64 libssh-0.10.4-4.fc39.x86_64 libssh-config-0.10.4-4.fc39.noarch libstdc++-13.0.1-0.8.fc39.x86_64 libtasn1-4.19.0-2.fc38.x86_64 libtirpc-1.3.3-1.fc38.x86_64 libunistring-1.1-3.fc38.x86_64 libunistring1.0-1.0-1.fc38.x86_64 libuuid-2.38.1-4.fc38.x86_64 libverto-0.3.2-5.fc38.x86_64 libxcrypt-4.4.33-7.fc39.x86_64 libxml2-2.10.3-3.fc38.x86_64 libyaml-0.2.5-9.fc38.x86_64 libzstd-1.5.4-1.fc39.x86_64 lua-libs-5.4.4-9.fc39.x86_64 lz4-libs-1.9.4-2.fc38.x86_64 mpdecimal-2.5.1-6.fc38.x86_64 mpfr-4.1.1-3.fc38.x86_64 ncurses-base-6.4-3.20230114.fc38.noarch ncurses-libs-6.4-3.20230114.fc38.x86_64 nettle-3.8-3.fc38.x86_64 npth-1.6-12.fc38.x86_64 openldap-2.6.4-1.fc39.x86_64 openssl-libs-1:3.0.8-1.fc39.x86_64 p11-kit-0.24.1-6.fc38.x86_64 p11-kit-trust-0.24.1-6.fc38.x86_64 pcre2-10.42-1.fc38.1.x86_64 pcre2-syntax-10.42-1.fc38.1.noarch popt-1.19-2.fc38.x86_64 publicsuffix-list-dafsa-20221208-2.fc38.noarch python-pip-wheel-23.0.1-1.fc39.noarch python-setuptools-wheel-65.5.1-2.fc38.noarch python3-3.11.2-1.fc39.x86_64 python3-dateutil-1:2.8.2-6.fc39.noarch python3-dbus-1.3.2-2.fc38.x86_64 python3-distro-1.8.0-3.fc39.noarch python3-dnf-4.14.0-2.fc38.noarch python3-dnf-plugins-core-4.3.1-2.fc38.noarch python3-gpg-1.17.1-5.fc39.x86_64 python3-hawkey-0.68.0-2.fc38.x86_64 python3-libcomps-0.1.19-1.fc39.x86_64 python3-libdnf-0.68.0-2.fc38.x86_64 python3-libs-3.11.2-1.fc39.x86_64 python3-rpm-4.18.1-1.fc39.x86_64 python3-six-1.16.0-9.fc38.noarch readline-8.2-3.fc38.x86_64 rpm-4.18.1-1.fc39.x86_64 rpm-build-libs-4.18.1-1.fc39.x86_64 rpm-libs-4.18.1-1.fc39.x86_64 rpm-sequoia-1.3.0-1.fc39.x86_64 rpm-sign-libs-4.18.1-1.fc39.x86_64 sed-4.8-12.fc38.x86_64 setup-2.14.3-3.fc39.noarch shadow-utils-2:4.13-6.fc39.x86_64 sqlite-libs-3.40.1-2.fc38.x86_64 systemd-libs-253.1-4.fc39.x86_64 tpm2-tss-4.0.1-3.fc38.x86_64 tzdata-2022g-2.fc38.noarch xz-libs-5.4.1-1.fc38.x86_64 zchunk-libs-1.3.0-1.fc39.x86_64 zlib-1.2.13-3.fc38.x86_64 Complete! Finish(bootstrap): dnf install Start(bootstrap): creating root cache Finish(bootstrap): creating root cache Finish(bootstrap): chroot init Start: chroot init INFO: mounting tmpfs at /var/lib/mock/fedora-rawhide-x86_64-1679462631.716718/root. INFO: calling preinit hooks INFO: enabled root cache INFO: enabled package manager cache Start: cleaning package manager metadata Finish: cleaning package manager metadata INFO: enabled HW Info plugin Mock Version: 3.5 INFO: Mock Version: 3.5 Start: dnf install No matches found for the following disable plugin patterns: local, spacewalk, versionlock Copr repository 1.9 MB/s | 428 kB 00:00 fedora 23 MB/s | 66 MB 00:02 Dependencies resolved. ================================================================================ Package Arch Version Repo Size ================================================================================ Installing group/module packages: bash x86_64 5.2.15-3.fc38 fedora 1.8 M bzip2 x86_64 1.0.8-13.fc38 fedora 52 k coreutils x86_64 9.1-11.fc38 fedora 1.1 M cpio x86_64 2.13-14.fc38 fedora 276 k diffutils x86_64 3.9-3.fc39 fedora 397 k fedora-release-common noarch 39-0.5 fedora 22 k findutils x86_64 1:4.9.0-3.fc38 fedora 492 k gawk x86_64 5.1.1-5.fc38 fedora 1.0 M glibc-minimal-langpack x86_64 2.37.9000-3.fc39 fedora 43 k grep x86_64 3.9-1.fc39 fedora 295 k gzip x86_64 1.12-3.fc38 fedora 166 k info x86_64 7.0.2-2.fc39 fedora 181 k patch x86_64 2.7.6-20.fc39 fedora 126 k redhat-rpm-config noarch 253-1.fc39 fedora 83 k rpm-build x86_64 4.18.1-1.fc39 fedora 76 k sed x86_64 4.8-12.fc38 fedora 306 k shadow-utils x86_64 2:4.13-6.fc39 fedora 1.3 M tar x86_64 2:1.34-7.fc38 fedora 889 k unzip x86_64 6.0-60.fc38 fedora 184 k util-linux x86_64 2.38.1-4.fc38 fedora 2.3 M which x86_64 2.21-39.fc39 fedora 42 k xz x86_64 5.4.1-1.fc38 fedora 419 k Installing dependencies: alternatives x86_64 1.21-2.fc38 fedora 38 k ansible-srpm-macros noarch 1-9.1.fc38 fedora 8.8 k audit-libs x86_64 3.1-2.fc39 fedora 117 k authselect x86_64 1.4.2-2.fc38 fedora 144 k authselect-libs x86_64 1.4.2-2.fc38 fedora 249 k basesystem noarch 11-15.fc38 fedora 7.0 k binutils x86_64 2.40-5.fc39 fedora 5.6 M binutils-gold x86_64 2.40-5.fc39 fedora 780 k bzip2-libs x86_64 1.0.8-13.fc38 fedora 41 k ca-certificates noarch 2023.2.60-2.fc38 fedora 845 k coreutils-common x86_64 9.1-11.fc38 fedora 2.0 M cracklib x86_64 2.9.7-31.fc38 fedora 92 k crypto-policies noarch 20230301-1.gita12f7b2.fc39 fedora 93 k curl x86_64 8.0.1-1.fc39 fedora 350 k cyrus-sasl-lib x86_64 2.1.28-9.fc38 fedora 794 k debugedit x86_64 5.0-7.fc38 fedora 78 k dwz x86_64 0.15-2.fc38 fedora 135 k ed x86_64 1.19-2.fc38 fedora 78 k efi-srpm-macros noarch 5-7.fc38 fedora 22 k elfutils x86_64 0.189-1.fc39 fedora 536 k elfutils-debuginfod-client x86_64 0.189-1.fc39 fedora 39 k elfutils-default-yama-scope noarch 0.189-1.fc39 fedora 15 k elfutils-libelf x86_64 0.189-1.fc39 fedora 196 k elfutils-libs x86_64 0.189-1.fc39 fedora 260 k fedora-gpg-keys noarch 39-0.1 fedora 126 k fedora-release noarch 39-0.5 fedora 12 k fedora-release-identity-basic noarch 39-0.5 fedora 13 k fedora-repos noarch 39-0.1 fedora 9.4 k fedora-repos-rawhide noarch 39-0.1 fedora 9.0 k file x86_64 5.44-3.fc39 fedora 50 k file-libs x86_64 5.44-3.fc39 fedora 730 k filesystem x86_64 3.18-4.fc39 fedora 1.1 M fonts-srpm-macros noarch 1:2.0.5-11.fc38 fedora 26 k fpc-srpm-macros noarch 1.3-7.fc38 fedora 7.8 k gdb-minimal x86_64 13.1-1.fc39 fedora 4.2 M gdbm-libs x86_64 1:1.23-3.fc38 fedora 56 k ghc-srpm-macros noarch 1.6.1-1.fc38 fedora 8.0 k glibc x86_64 2.37.9000-3.fc39 fedora 2.1 M glibc-common x86_64 2.37.9000-3.fc39 fedora 321 k glibc-gconv-extra x86_64 2.37.9000-3.fc39 fedora 1.6 M gmp x86_64 1:6.2.1-4.fc38 fedora 313 k gnat-srpm-macros noarch 6-2.fc38 fedora 8.8 k go-srpm-macros noarch 3.2.0-2.fc38 fedora 27 k jansson x86_64 2.13.1-6.fc38 fedora 44 k kernel-srpm-macros noarch 1.0-16.fc38 fedora 9.3 k keyutils-libs x86_64 1.6.1-6.fc38 fedora 31 k krb5-libs x86_64 1.20.1-9.fc39 fedora 727 k libacl x86_64 2.3.1-7.fc39 fedora 23 k libarchive x86_64 3.6.1-5.fc39 fedora 400 k libattr x86_64 2.5.1-7.fc39 fedora 18 k libblkid x86_64 2.38.1-4.fc38 fedora 106 k libbrotli x86_64 1.0.9-11.fc38 fedora 317 k libcap x86_64 2.48-6.fc38 fedora 67 k libcap-ng x86_64 0.8.3-5.fc38 fedora 32 k libcom_err x86_64 1.46.5-4.fc38 fedora 26 k libcurl x86_64 8.0.1-1.fc39 fedora 313 k libdb x86_64 5.3.28-55.fc38 fedora 758 k libeconf x86_64 0.4.0-5.fc38 fedora 27 k libevent x86_64 2.1.12-8.fc38 fedora 257 k libfdisk x86_64 2.38.1-4.fc38 fedora 161 k libffi x86_64 3.4.4-2.fc38 fedora 38 k libgcc x86_64 13.0.1-0.8.fc39 fedora 102 k libgomp x86_64 13.0.1-0.8.fc39 fedora 310 k libidn2 x86_64 2.3.4-2.fc38 fedora 160 k libmount x86_64 2.38.1-4.fc38 fedora 135 k libnghttp2 x86_64 1.52.0-1.fc39 fedora 75 k libnsl2 x86_64 2.0.0-5.fc38 fedora 30 k libpkgconf x86_64 1.9.4-1.fc39 fedora 38 k libpsl x86_64 0.21.2-2.fc38 fedora 65 k libpwquality x86_64 1.4.5-3.fc38 fedora 119 k libselinux x86_64 3.5-1.fc39 fedora 87 k libsemanage x86_64 3.5-1.fc39 fedora 120 k libsepol x86_64 3.5-1.fc39 fedora 324 k libsigsegv x86_64 2.14-4.fc38 fedora 27 k libsmartcols x86_64 2.38.1-4.fc38 fedora 64 k libssh x86_64 0.10.4-4.fc39 fedora 209 k libssh-config noarch 0.10.4-4.fc39 fedora 8.9 k libstdc++ x86_64 13.0.1-0.8.fc39 fedora 852 k libtasn1 x86_64 4.19.0-2.fc38 fedora 74 k libtirpc x86_64 1.3.3-1.fc38 fedora 94 k libunistring1.0 x86_64 1.0-1.fc38 fedora 539 k libutempter x86_64 1.2.1-9.fc39 fedora 26 k libuuid x86_64 2.38.1-4.fc38 fedora 28 k libverto x86_64 0.3.2-5.fc38 fedora 21 k libxcrypt x86_64 4.4.33-7.fc39 fedora 120 k libxml2 x86_64 2.10.3-3.fc38 fedora 700 k libzstd x86_64 1.5.4-1.fc39 fedora 302 k lua-libs x86_64 5.4.4-9.fc39 fedora 133 k lua-srpm-macros noarch 1-8.fc38 fedora 8.6 k lz4-libs x86_64 1.9.4-2.fc38 fedora 67 k mpfr x86_64 4.1.1-3.fc38 fedora 600 k ncurses-base noarch 6.4-3.20230114.fc38 fedora 87 k ncurses-libs x86_64 6.4-3.20230114.fc38 fedora 333 k ocaml-srpm-macros noarch 7-3.fc38 fedora 13 k openblas-srpm-macros noarch 2-13.fc38 fedora 7.5 k openldap x86_64 2.6.4-1.fc39 fedora 255 k openssl-libs x86_64 1:3.0.8-1.fc39 fedora 2.1 M p11-kit x86_64 0.24.1-6.fc38 fedora 359 k p11-kit-trust x86_64 0.24.1-6.fc38 fedora 136 k package-notes-srpm-macros noarch 0.5-7.fc38 fedora 11 k pam x86_64 1.5.2-17.fc39 fedora 533 k pam-libs x86_64 1.5.2-17.fc39 fedora 57 k pcre2 x86_64 10.42-1.fc38.1 fedora 234 k pcre2-syntax noarch 10.42-1.fc38.1 fedora 144 k perl-srpm-macros noarch 1-48.fc38 fedora 8.4 k pkgconf x86_64 1.9.4-1.fc39 fedora 42 k pkgconf-m4 noarch 1.9.4-1.fc39 fedora 14 k pkgconf-pkg-config x86_64 1.9.4-1.fc39 fedora 9.6 k popt x86_64 1.19-2.fc38 fedora 67 k publicsuffix-list-dafsa noarch 20221208-2.fc38 fedora 59 k pyproject-srpm-macros noarch 1.6.3-1.fc39 fedora 14 k python-srpm-macros noarch 3.11-10.fc39 fedora 26 k qt5-srpm-macros noarch 5.15.8-2.fc38 fedora 8.1 k readline x86_64 8.2-3.fc38 fedora 212 k rpm x86_64 4.18.1-1.fc39 fedora 572 k rpm-build-libs x86_64 4.18.1-1.fc39 fedora 94 k rpm-libs x86_64 4.18.1-1.fc39 fedora 312 k rpm-sequoia x86_64 1.3.0-1.fc39 fedora 855 k rpmautospec-rpm-macros noarch 0.3.5-1.fc38 fedora 9.3 k rust-srpm-macros noarch 24-1.fc39 fedora 12 k setup noarch 2.14.3-3.fc39 fedora 152 k sqlite-libs x86_64 3.40.1-2.fc38 fedora 666 k systemd-libs x86_64 253.1-4.fc39 fedora 654 k tzdata noarch 2022g-2.fc38 fedora 716 k util-linux-core x86_64 2.38.1-4.fc38 fedora 473 k xxhash-libs x86_64 0.8.1-4.fc38 fedora 40 k xz-libs x86_64 5.4.1-1.fc38 fedora 108 k zip x86_64 3.0-36.fc38 fedora 265 k zlib x86_64 1.2.13-3.fc38 fedora 95 k zstd x86_64 1.5.4-1.fc39 fedora 475 k Installing Groups: Buildsystem building group Transaction Summary ================================================================================ Install 152 Packages Total download size: 53 M Installed size: 184 M Downloading Packages: (1/152): ansible-srpm-macros-1-9.1.fc38.noarch. 77 kB/s | 8.8 kB 00:00 (2/152): alternatives-1.21-2.fc38.x86_64.rpm 312 kB/s | 38 kB 00:00 (3/152): audit-libs-3.1-2.fc39.x86_64.rpm 588 kB/s | 117 kB 00:00 (4/152): basesystem-11-15.fc38.noarch.rpm 193 kB/s | 7.0 kB 00:00 (5/152): authselect-1.4.2-2.fc38.x86_64.rpm 998 kB/s | 144 kB 00:00 (6/152): authselect-libs-1.4.2-2.fc38.x86_64.rp 1.6 MB/s | 249 kB 00:00 (7/152): binutils-gold-2.40-5.fc39.x86_64.rpm 3.3 MB/s | 780 kB 00:00 (8/152): bzip2-1.0.8-13.fc38.x86_64.rpm 1.4 MB/s | 52 kB 00:00 (9/152): bash-5.2.15-3.fc38.x86_64.rpm 4.5 MB/s | 1.8 MB 00:00 (10/152): bzip2-libs-1.0.8-13.fc38.x86_64.rpm 418 kB/s | 41 kB 00:00 (11/152): coreutils-9.1-11.fc38.x86_64.rpm 9.4 MB/s | 1.1 MB 00:00 (12/152): binutils-2.40-5.fc39.x86_64.rpm 11 MB/s | 5.6 MB 00:00 (13/152): ca-certificates-2023.2.60-2.fc38.noar 5.0 MB/s | 845 kB 00:00 (14/152): cpio-2.13-14.fc38.x86_64.rpm 7.6 MB/s | 276 kB 00:00 (15/152): coreutils-common-9.1-11.fc38.x86_64.r 25 MB/s | 2.0 MB 00:00 (16/152): cracklib-2.9.7-31.fc38.x86_64.rpm 2.2 MB/s | 92 kB 00:00 (17/152): crypto-policies-20230301-1.gita12f7b2 2.2 MB/s | 93 kB 00:00 (18/152): curl-8.0.1-1.fc39.x86_64.rpm 10 MB/s | 350 kB 00:00 (19/152): debugedit-5.0-7.fc38.x86_64.rpm 2.8 MB/s | 78 kB 00:00 (20/152): diffutils-3.9-3.fc39.x86_64.rpm 11 MB/s | 397 kB 00:00 (21/152): dwz-0.15-2.fc38.x86_64.rpm 4.4 MB/s | 135 kB 00:00 (22/152): ed-1.19-2.fc38.x86_64.rpm 2.6 MB/s | 78 kB 00:00 (23/152): efi-srpm-macros-5-7.fc38.noarch.rpm 794 kB/s | 22 kB 00:00 (24/152): cyrus-sasl-lib-2.1.28-9.fc38.x86_64.r 6.8 MB/s | 794 kB 00:00 (25/152): elfutils-0.189-1.fc39.x86_64.rpm 14 MB/s | 536 kB 00:00 (26/152): elfutils-debuginfod-client-0.189-1.fc 1.2 MB/s | 39 kB 00:00 (27/152): elfutils-default-yama-scope-0.189-1.f 502 kB/s | 15 kB 00:00 (28/152): elfutils-libelf-0.189-1.fc39.x86_64.r 6.2 MB/s | 196 kB 00:00 (29/152): elfutils-libs-0.189-1.fc39.x86_64.rpm 7.8 MB/s | 260 kB 00:00 (30/152): fedora-gpg-keys-39-0.1.noarch.rpm 3.0 MB/s | 126 kB 00:00 (31/152): fedora-release-39-0.5.noarch.rpm 227 kB/s | 12 kB 00:00 (32/152): fedora-release-common-39-0.5.noarch.r 508 kB/s | 22 kB 00:00 (33/152): fedora-release-identity-basic-39-0.5. 438 kB/s | 13 kB 00:00 (34/152): fedora-repos-39-0.1.noarch.rpm 354 kB/s | 9.4 kB 00:00 (35/152): fedora-repos-rawhide-39-0.1.noarch.rp 335 kB/s | 9.0 kB 00:00 (36/152): file-5.44-3.fc39.x86_64.rpm 1.8 MB/s | 50 kB 00:00 (37/152): filesystem-3.18-4.fc39.x86_64.rpm 9.2 MB/s | 1.1 MB 00:00 (38/152): findutils-4.9.0-3.fc38.x86_64.rpm 3.7 MB/s | 492 kB 00:00 (39/152): fonts-srpm-macros-2.0.5-11.fc38.noarc 736 kB/s | 26 kB 00:00 (40/152): fpc-srpm-macros-1.3-7.fc38.noarch.rpm 225 kB/s | 7.8 kB 00:00 (41/152): file-libs-5.44-3.fc39.x86_64.rpm 4.2 MB/s | 730 kB 00:00 (42/152): gawk-5.1.1-5.fc38.x86_64.rpm 4.5 MB/s | 1.0 MB 00:00 (43/152): gdbm-libs-1.23-3.fc38.x86_64.rpm 146 kB/s | 56 kB 00:00 (44/152): ghc-srpm-macros-1.6.1-1.fc38.noarch.r 25 kB/s | 8.0 kB 00:00 (45/152): glibc-common-2.37.9000-3.fc39.x86_64. 3.6 MB/s | 321 kB 00:00 (46/152): glibc-2.37.9000-3.fc39.x86_64.rpm 8.1 MB/s | 2.1 MB 00:00 (47/152): glibc-minimal-langpack-2.37.9000-3.fc 1.6 MB/s | 43 kB 00:00 (48/152): gmp-6.2.1-4.fc38.x86_64.rpm 7.6 MB/s | 313 kB 00:00 (49/152): gdb-minimal-13.1-1.fc39.x86_64.rpm 5.7 MB/s | 4.2 MB 00:00 (50/152): gnat-srpm-macros-6-2.fc38.noarch.rpm 246 kB/s | 8.8 kB 00:00 (51/152): go-srpm-macros-3.2.0-2.fc38.noarch.rp 783 kB/s | 27 kB 00:00 (52/152): glibc-gconv-extra-2.37.9000-3.fc39.x8 9.9 MB/s | 1.6 MB 00:00 (53/152): gzip-1.12-3.fc38.x86_64.rpm 3.6 MB/s | 166 kB 00:00 (54/152): grep-3.9-1.fc39.x86_64.rpm 4.5 MB/s | 295 kB 00:00 (55/152): jansson-2.13.1-6.fc38.x86_64.rpm 1.4 MB/s | 44 kB 00:00 (56/152): info-7.0.2-2.fc39.x86_64.rpm 3.1 MB/s | 181 kB 00:00 (57/152): kernel-srpm-macros-1.0-16.fc38.noarch 246 kB/s | 9.3 kB 00:00 (58/152): keyutils-libs-1.6.1-6.fc38.x86_64.rpm 1.0 MB/s | 31 kB 00:00 (59/152): libacl-2.3.1-7.fc39.x86_64.rpm 890 kB/s | 23 kB 00:00 (60/152): libattr-2.5.1-7.fc39.x86_64.rpm 485 kB/s | 18 kB 00:00 (61/152): libblkid-2.38.1-4.fc38.x86_64.rpm 2.5 MB/s | 106 kB 00:00 (62/152): libarchive-3.6.1-5.fc39.x86_64.rpm 3.6 MB/s | 400 kB 00:00 (63/152): libbrotli-1.0.9-11.fc38.x86_64.rpm 10 MB/s | 317 kB 00:00 (64/152): krb5-libs-1.20.1-9.fc39.x86_64.rpm 4.6 MB/s | 727 kB 00:00 (65/152): libcap-2.48-6.fc38.x86_64.rpm 2.1 MB/s | 67 kB 00:00 (66/152): libcap-ng-0.8.3-5.fc38.x86_64.rpm 1.2 MB/s | 32 kB 00:00 (67/152): libcom_err-1.46.5-4.fc38.x86_64.rpm 974 kB/s | 26 kB 00:00 (68/152): libdb-5.3.28-55.fc38.x86_64.rpm 16 MB/s | 758 kB 00:00 (69/152): libeconf-0.4.0-5.fc38.x86_64.rpm 683 kB/s | 27 kB 00:00 (70/152): libcurl-8.0.1-1.fc39.x86_64.rpm 4.9 MB/s | 313 kB 00:00 (71/152): libevent-2.1.12-8.fc38.x86_64.rpm 8.2 MB/s | 257 kB 00:00 (72/152): libfdisk-2.38.1-4.fc38.x86_64.rpm 4.4 MB/s | 161 kB 00:00 (73/152): libffi-3.4.4-2.fc38.x86_64.rpm 1.3 MB/s | 38 kB 00:00 (74/152): libgcc-13.0.1-0.8.fc39.x86_64.rpm 3.7 MB/s | 102 kB 00:00 (75/152): libmount-2.38.1-4.fc38.x86_64.rpm 4.7 MB/s | 135 kB 00:00 (76/152): libidn2-2.3.4-2.fc38.x86_64.rpm 2.8 MB/s | 160 kB 00:00 (77/152): libgomp-13.0.1-0.8.fc39.x86_64.rpm 4.0 MB/s | 310 kB 00:00 (78/152): libnghttp2-1.52.0-1.fc39.x86_64.rpm 2.0 MB/s | 75 kB 00:00 (79/152): libnsl2-2.0.0-5.fc38.x86_64.rpm 803 kB/s | 30 kB 00:00 (80/152): libpkgconf-1.9.4-1.fc39.x86_64.rpm 945 kB/s | 38 kB 00:00 (81/152): libpsl-0.21.2-2.fc38.x86_64.rpm 1.6 MB/s | 65 kB 00:00 (82/152): libpwquality-1.4.5-3.fc38.x86_64.rpm 2.6 MB/s | 119 kB 00:00 (83/152): libselinux-3.5-1.fc39.x86_64.rpm 2.0 MB/s | 87 kB 00:00 (84/152): libsemanage-3.5-1.fc39.x86_64.rpm 2.7 MB/s | 120 kB 00:00 (85/152): libsigsegv-2.14-4.fc38.x86_64.rpm 731 kB/s | 27 kB 00:00 (86/152): libsmartcols-2.38.1-4.fc38.x86_64.rpm 1.7 MB/s | 64 kB 00:00 (87/152): libsepol-3.5-1.fc39.x86_64.rpm 4.8 MB/s | 324 kB 00:00 (88/152): libssh-config-0.10.4-4.fc39.noarch.rp 345 kB/s | 8.9 kB 00:00 (89/152): libssh-0.10.4-4.fc39.x86_64.rpm 4.9 MB/s | 209 kB 00:00 (90/152): libstdc++-13.0.1-0.8.fc39.x86_64.rpm 20 MB/s | 852 kB 00:00 (91/152): libtasn1-4.19.0-2.fc38.x86_64.rpm 1.8 MB/s | 74 kB 00:00 (92/152): libtirpc-1.3.3-1.fc38.x86_64.rpm 2.7 MB/s | 94 kB 00:00 (93/152): libunistring1.0-1.0-1.fc38.x86_64.rpm 15 MB/s | 539 kB 00:00 (94/152): libuuid-2.38.1-4.fc38.x86_64.rpm 1.0 MB/s | 28 kB 00:00 (95/152): libutempter-1.2.1-9.fc39.x86_64.rpm 930 kB/s | 26 kB 00:00 (96/152): libverto-0.3.2-5.fc38.x86_64.rpm 753 kB/s | 21 kB 00:00 (97/152): libxcrypt-4.4.33-7.fc39.x86_64.rpm 3.3 MB/s | 120 kB 00:00 (98/152): libzstd-1.5.4-1.fc39.x86_64.rpm 8.0 MB/s | 302 kB 00:00 (99/152): lua-libs-5.4.4-9.fc39.x86_64.rpm 2.8 MB/s | 133 kB 00:00 (100/152): lua-srpm-macros-1-8.fc38.noarch.rpm 247 kB/s | 8.6 kB 00:00 (101/152): libxml2-2.10.3-3.fc38.x86_64.rpm 7.1 MB/s | 700 kB 00:00 (102/152): lz4-libs-1.9.4-2.fc38.x86_64.rpm 1.5 MB/s | 67 kB 00:00 (103/152): mpfr-4.1.1-3.fc38.x86_64.rpm 11 MB/s | 600 kB 00:00 (104/152): ncurses-base-6.4-3.20230114.fc38.noa 1.6 MB/s | 87 kB 00:00 (105/152): ocaml-srpm-macros-7-3.fc38.noarch.rp 258 kB/s | 13 kB 00:00 (106/152): ncurses-libs-6.4-3.20230114.fc38.x86 4.3 MB/s | 333 kB 00:00 (107/152): openblas-srpm-macros-2-13.fc38.noarc 134 kB/s | 7.5 kB 00:00 (108/152): openldap-2.6.4-1.fc39.x86_64.rpm 1.3 MB/s | 255 kB 00:00 (109/152): openssl-libs-3.0.8-1.fc39.x86_64.rpm 7.7 MB/s | 2.1 MB 00:00 (110/152): p11-kit-trust-0.24.1-6.fc38.x86_64.r 1.2 MB/s | 136 kB 00:00 (111/152): package-notes-srpm-macros-0.5-7.fc38 322 kB/s | 11 kB 00:00 (112/152): pam-libs-1.5.2-17.fc39.x86_64.rpm 534 kB/s | 57 kB 00:00 (113/152): p11-kit-0.24.1-6.fc38.x86_64.rpm 747 kB/s | 359 kB 00:00 (114/152): pam-1.5.2-17.fc39.x86_64.rpm 2.2 MB/s | 533 kB 00:00 (115/152): pcre2-10.42-1.fc38.1.x86_64.rpm 2.0 MB/s | 234 kB 00:00 (116/152): pcre2-syntax-10.42-1.fc38.1.noarch.r 1.6 MB/s | 144 kB 00:00 (117/152): pkgconf-1.9.4-1.fc39.x86_64.rpm 378 kB/s | 42 kB 00:00 (118/152): patch-2.7.6-20.fc39.x86_64.rpm 349 kB/s | 126 kB 00:00 (119/152): pkgconf-m4-1.9.4-1.fc39.noarch.rpm 211 kB/s | 14 kB 00:00 (120/152): pkgconf-pkg-config-1.9.4-1.fc39.x86_ 336 kB/s | 9.6 kB 00:00 (121/152): perl-srpm-macros-1-48.fc38.noarch.rp 40 kB/s | 8.4 kB 00:00 (122/152): popt-1.19-2.fc38.x86_64.rpm 1.4 MB/s | 67 kB 00:00 (123/152): publicsuffix-list-dafsa-20221208-2.f 1.9 MB/s | 59 kB 00:00 (124/152): pyproject-srpm-macros-1.6.3-1.fc39.n 512 kB/s | 14 kB 00:00 (125/152): python-srpm-macros-3.11-10.fc39.noar 778 kB/s | 26 kB 00:00 (126/152): qt5-srpm-macros-5.15.8-2.fc38.noarch 291 kB/s | 8.1 kB 00:00 (127/152): readline-8.2-3.fc38.x86_64.rpm 4.4 MB/s | 212 kB 00:00 (128/152): redhat-rpm-config-253-1.fc39.noarch. 1.6 MB/s | 83 kB 00:00 (129/152): rpm-build-4.18.1-1.fc39.x86_64.rpm 2.1 MB/s | 76 kB 00:00 (130/152): rpm-build-libs-4.18.1-1.fc39.x86_64. 1.5 MB/s | 94 kB 00:00 (131/152): rpm-libs-4.18.1-1.fc39.x86_64.rpm 5.1 MB/s | 312 kB 00:00 (132/152): rpm-4.18.1-1.fc39.x86_64.rpm 4.3 MB/s | 572 kB 00:00 (133/152): rpmautospec-rpm-macros-0.3.5-1.fc38. 359 kB/s | 9.3 kB 00:00 (134/152): rust-srpm-macros-24-1.fc39.noarch.rp 453 kB/s | 12 kB 00:00 (135/152): sed-4.8-12.fc38.x86_64.rpm 5.4 MB/s | 306 kB 00:00 (136/152): setup-2.14.3-3.fc39.noarch.rpm 3.0 MB/s | 152 kB 00:00 (137/152): rpm-sequoia-1.3.0-1.fc39.x86_64.rpm 4.4 MB/s | 855 kB 00:00 (138/152): shadow-utils-4.13-6.fc39.x86_64.rpm 9.6 MB/s | 1.3 MB 00:00 (139/152): sqlite-libs-3.40.1-2.fc38.x86_64.rpm 5.3 MB/s | 666 kB 00:00 (140/152): systemd-libs-253.1-4.fc39.x86_64.rpm 6.2 MB/s | 654 kB 00:00 (141/152): tar-1.34-7.fc38.x86_64.rpm 11 MB/s | 889 kB 00:00 (142/152): tzdata-2022g-2.fc38.noarch.rpm 6.9 MB/s | 716 kB 00:00 (143/152): unzip-6.0-60.fc38.x86_64.rpm 4.2 MB/s | 184 kB 00:00 (144/152): which-2.21-39.fc39.x86_64.rpm 1.4 MB/s | 42 kB 00:00 (145/152): util-linux-core-2.38.1-4.fc38.x86_64 7.0 MB/s | 473 kB 00:00 (146/152): xxhash-libs-0.8.1-4.fc38.x86_64.rpm 1.0 MB/s | 40 kB 00:00 (147/152): util-linux-2.38.1-4.fc38.x86_64.rpm 19 MB/s | 2.3 MB 00:00 (148/152): xz-libs-5.4.1-1.fc38.x86_64.rpm 2.9 MB/s | 108 kB 00:00 (149/152): xz-5.4.1-1.fc38.x86_64.rpm 6.9 MB/s | 419 kB 00:00 (150/152): zip-3.0-36.fc38.x86_64.rpm 4.9 MB/s | 265 kB 00:00 (151/152): zlib-1.2.13-3.fc38.x86_64.rpm 2.2 MB/s | 95 kB 00:00 (152/152): zstd-1.5.4-1.fc39.x86_64.rpm 5.3 MB/s | 475 kB 00:00 -------------------------------------------------------------------------------- Total 12 MB/s | 53 MB 00:04 fedora 1.6 MB/s | 1.6 kB 00:00 Importing GPG key 0x18B8E74C: Userid : "Fedora (39) " Fingerprint: E8F2 3996 F232 1864 0CB4 4CBE 75CF 5AC4 18B8 E74C From : /usr/share/distribution-gpg-keys/fedora/RPM-GPG-KEY-fedora-39-primary Key imported successfully fedora 1.6 MB/s | 1.6 kB 00:00 GPG key at file:///usr/share/distribution-gpg-keys/fedora/RPM-GPG-KEY-fedora-39-primary (0x18B8E74C) is already installed fedora 1.6 MB/s | 1.6 kB 00:00 Importing GPG key 0xEB10B464: Userid : "Fedora (38) " Fingerprint: 6A51 BBAB BA3D 5467 B617 1221 809A 8D7C EB10 B464 From : /usr/share/distribution-gpg-keys/fedora/RPM-GPG-KEY-fedora-38-primary Key imported successfully Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Running scriptlet: filesystem-3.18-4.fc39.x86_64 1/1 Preparing : 1/1 Installing : libgcc-13.0.1-0.8.fc39.x86_64 1/152 Running scriptlet: libgcc-13.0.1-0.8.fc39.x86_64 1/152 Installing : crypto-policies-20230301-1.gita12f7b2.fc39.noarc 2/152 Running scriptlet: crypto-policies-20230301-1.gita12f7b2.fc39.noarc 2/152 Installing : tzdata-2022g-2.fc38.noarch 3/152 Installing : fedora-release-identity-basic-39-0.5.noarch 4/152 Installing : rust-srpm-macros-24-1.fc39.noarch 5/152 Installing : qt5-srpm-macros-5.15.8-2.fc38.noarch 6/152 Installing : pyproject-srpm-macros-1.6.3-1.fc39.noarch 7/152 Installing : publicsuffix-list-dafsa-20221208-2.fc38.noarch 8/152 Installing : pkgconf-m4-1.9.4-1.fc39.noarch 9/152 Installing : perl-srpm-macros-1-48.fc38.noarch 10/152 Installing : pcre2-syntax-10.42-1.fc38.1.noarch 11/152 Installing : package-notes-srpm-macros-0.5-7.fc38.noarch 12/152 Installing : openblas-srpm-macros-2-13.fc38.noarch 13/152 Installing : ocaml-srpm-macros-7-3.fc38.noarch 14/152 Installing : ncurses-base-6.4-3.20230114.fc38.noarch 15/152 Installing : libssh-config-0.10.4-4.fc39.noarch 16/152 Installing : kernel-srpm-macros-1.0-16.fc38.noarch 17/152 Installing : gnat-srpm-macros-6-2.fc38.noarch 18/152 Installing : ghc-srpm-macros-1.6.1-1.fc38.noarch 19/152 Installing : fpc-srpm-macros-1.3-7.fc38.noarch 20/152 Installing : fedora-gpg-keys-39-0.1.noarch 21/152 Installing : fedora-release-39-0.5.noarch 22/152 Installing : fedora-release-common-39-0.5.noarch 23/152 Installing : fedora-repos-rawhide-39-0.1.noarch 24/152 Installing : fedora-repos-39-0.1.noarch 25/152 Installing : setup-2.14.3-3.fc39.noarch 26/152 warning: /etc/hosts created as /etc/hosts.rpmnew Running scriptlet: setup-2.14.3-3.fc39.noarch 26/152 Installing : filesystem-3.18-4.fc39.x86_64 27/152 Installing : basesystem-11-15.fc38.noarch 28/152 Installing : glibc-gconv-extra-2.37.9000-3.fc39.x86_64 29/152 Running scriptlet: glibc-gconv-extra-2.37.9000-3.fc39.x86_64 29/152 Installing : glibc-minimal-langpack-2.37.9000-3.fc39.x86_64 30/152 Installing : glibc-common-2.37.9000-3.fc39.x86_64 31/152 Running scriptlet: glibc-2.37.9000-3.fc39.x86_64 32/152 Installing : glibc-2.37.9000-3.fc39.x86_64 32/152 Running scriptlet: glibc-2.37.9000-3.fc39.x86_64 32/152 Installing : ncurses-libs-6.4-3.20230114.fc38.x86_64 33/152 Installing : bash-5.2.15-3.fc38.x86_64 34/152 Running scriptlet: bash-5.2.15-3.fc38.x86_64 34/152 Installing : zlib-1.2.13-3.fc38.x86_64 35/152 Installing : xz-libs-5.4.1-1.fc38.x86_64 36/152 Installing : bzip2-libs-1.0.8-13.fc38.x86_64 37/152 Installing : libzstd-1.5.4-1.fc39.x86_64 38/152 Installing : elfutils-libelf-0.189-1.fc39.x86_64 39/152 Installing : libstdc++-13.0.1-0.8.fc39.x86_64 40/152 Installing : libuuid-2.38.1-4.fc38.x86_64 41/152 Installing : popt-1.19-2.fc38.x86_64 42/152 Installing : libblkid-2.38.1-4.fc38.x86_64 43/152 Installing : readline-8.2-3.fc38.x86_64 44/152 Installing : gmp-1:6.2.1-4.fc38.x86_64 45/152 Installing : libattr-2.5.1-7.fc39.x86_64 46/152 Installing : libacl-2.3.1-7.fc39.x86_64 47/152 Installing : libcap-2.48-6.fc38.x86_64 48/152 Installing : libxcrypt-4.4.33-7.fc39.x86_64 49/152 Installing : libeconf-0.4.0-5.fc38.x86_64 50/152 Installing : lz4-libs-1.9.4-2.fc38.x86_64 51/152 Installing : systemd-libs-253.1-4.fc39.x86_64 52/152 Installing : mpfr-4.1.1-3.fc38.x86_64 53/152 Installing : dwz-0.15-2.fc38.x86_64 54/152 Installing : unzip-6.0-60.fc38.x86_64 55/152 Installing : file-libs-5.44-3.fc39.x86_64 56/152 Installing : file-5.44-3.fc39.x86_64 57/152 Installing : sqlite-libs-3.40.1-2.fc38.x86_64 58/152 Installing : alternatives-1.21-2.fc38.x86_64 59/152 Installing : jansson-2.13.1-6.fc38.x86_64 60/152 Installing : libcap-ng-0.8.3-5.fc38.x86_64 61/152 Installing : audit-libs-3.1-2.fc39.x86_64 62/152 Installing : pam-libs-1.5.2-17.fc39.x86_64 63/152 Installing : libcom_err-1.46.5-4.fc38.x86_64 64/152 Installing : libsepol-3.5-1.fc39.x86_64 65/152 Installing : libsmartcols-2.38.1-4.fc38.x86_64 66/152 Installing : libunistring1.0-1.0-1.fc38.x86_64 67/152 Installing : libidn2-2.3.4-2.fc38.x86_64 68/152 Installing : lua-libs-5.4.4-9.fc39.x86_64 69/152 Installing : pcre2-10.42-1.fc38.1.x86_64 70/152 Installing : libselinux-3.5-1.fc39.x86_64 71/152 Installing : sed-4.8-12.fc38.x86_64 72/152 Installing : grep-3.9-1.fc39.x86_64 73/152 Installing : findutils-1:4.9.0-3.fc38.x86_64 74/152 Installing : xz-5.4.1-1.fc38.x86_64 75/152 Installing : libmount-2.38.1-4.fc38.x86_64 76/152 Installing : util-linux-core-2.38.1-4.fc38.x86_64 77/152 Installing : libsemanage-3.5-1.fc39.x86_64 78/152 Installing : shadow-utils-2:4.13-6.fc39.x86_64 79/152 Running scriptlet: libutempter-1.2.1-9.fc39.x86_64 80/152 Installing : libutempter-1.2.1-9.fc39.x86_64 80/152 Installing : tar-2:1.34-7.fc38.x86_64 81/152 Installing : libpsl-0.21.2-2.fc38.x86_64 82/152 Installing : zip-3.0-36.fc38.x86_64 83/152 Installing : zstd-1.5.4-1.fc39.x86_64 84/152 Installing : libfdisk-2.38.1-4.fc38.x86_64 85/152 Installing : bzip2-1.0.8-13.fc38.x86_64 86/152 Installing : libxml2-2.10.3-3.fc38.x86_64 87/152 Installing : ed-1.19-2.fc38.x86_64 88/152 Installing : patch-2.7.6-20.fc39.x86_64 89/152 Installing : elfutils-default-yama-scope-0.189-1.fc39.noarch 90/152 Running scriptlet: elfutils-default-yama-scope-0.189-1.fc39.noarch 90/152 Installing : cpio-2.13-14.fc38.x86_64 91/152 Installing : diffutils-3.9-3.fc39.x86_64 92/152 Installing : gdbm-libs-1:1.23-3.fc38.x86_64 93/152 Installing : cyrus-sasl-lib-2.1.28-9.fc38.x86_64 94/152 Installing : keyutils-libs-1.6.1-6.fc38.x86_64 95/152 Installing : libbrotli-1.0.9-11.fc38.x86_64 96/152 Installing : libdb-5.3.28-55.fc38.x86_64 97/152 Installing : libffi-3.4.4-2.fc38.x86_64 98/152 Installing : p11-kit-0.24.1-6.fc38.x86_64 99/152 Installing : libgomp-13.0.1-0.8.fc39.x86_64 100/152 Installing : libnghttp2-1.52.0-1.fc39.x86_64 101/152 Installing : libpkgconf-1.9.4-1.fc39.x86_64 102/152 Installing : pkgconf-1.9.4-1.fc39.x86_64 103/152 Installing : pkgconf-pkg-config-1.9.4-1.fc39.x86_64 104/152 Installing : libsigsegv-2.14-4.fc38.x86_64 105/152 Installing : gawk-5.1.1-5.fc38.x86_64 106/152 Installing : libtasn1-4.19.0-2.fc38.x86_64 107/152 Installing : p11-kit-trust-0.24.1-6.fc38.x86_64 108/152 Running scriptlet: p11-kit-trust-0.24.1-6.fc38.x86_64 108/152 Installing : libverto-0.3.2-5.fc38.x86_64 109/152 Installing : xxhash-libs-0.8.1-4.fc38.x86_64 110/152 Installing : coreutils-common-9.1-11.fc38.x86_64 111/152 Installing : openssl-libs-1:3.0.8-1.fc39.x86_64 112/152 Installing : coreutils-9.1-11.fc38.x86_64 113/152 Running scriptlet: ca-certificates-2023.2.60-2.fc38.noarch 114/152 Installing : ca-certificates-2023.2.60-2.fc38.noarch 114/152 Running scriptlet: ca-certificates-2023.2.60-2.fc38.noarch 114/152 Installing : krb5-libs-1.20.1-9.fc39.x86_64 115/152 Installing : libtirpc-1.3.3-1.fc38.x86_64 116/152 Running scriptlet: authselect-libs-1.4.2-2.fc38.x86_64 117/152 Installing : authselect-libs-1.4.2-2.fc38.x86_64 117/152 Installing : gzip-1.12-3.fc38.x86_64 118/152 Installing : rpm-sequoia-1.3.0-1.fc39.x86_64 119/152 Installing : rpm-libs-4.18.1-1.fc39.x86_64 120/152 Installing : cracklib-2.9.7-31.fc38.x86_64 121/152 Installing : libpwquality-1.4.5-3.fc38.x86_64 122/152 Installing : authselect-1.4.2-2.fc38.x86_64 123/152 Installing : libnsl2-2.0.0-5.fc38.x86_64 124/152 Installing : pam-1.5.2-17.fc39.x86_64 125/152 Installing : libssh-0.10.4-4.fc39.x86_64 126/152 Installing : libarchive-3.6.1-5.fc39.x86_64 127/152 Installing : libevent-2.1.12-8.fc38.x86_64 128/152 Installing : openldap-2.6.4-1.fc39.x86_64 129/152 Installing : libcurl-8.0.1-1.fc39.x86_64 130/152 Installing : elfutils-libs-0.189-1.fc39.x86_64 131/152 Installing : elfutils-debuginfod-client-0.189-1.fc39.x86_64 132/152 Installing : binutils-gold-2.40-5.fc39.x86_64 133/152 Installing : binutils-2.40-5.fc39.x86_64 134/152 Running scriptlet: binutils-2.40-5.fc39.x86_64 134/152 Installing : elfutils-0.189-1.fc39.x86_64 135/152 Installing : gdb-minimal-13.1-1.fc39.x86_64 136/152 Installing : debugedit-5.0-7.fc38.x86_64 137/152 Installing : rpm-build-libs-4.18.1-1.fc39.x86_64 138/152 Installing : curl-8.0.1-1.fc39.x86_64 139/152 Running scriptlet: rpm-4.18.1-1.fc39.x86_64 140/152 Installing : rpm-4.18.1-1.fc39.x86_64 140/152 Installing : efi-srpm-macros-5-7.fc38.noarch 141/152 Installing : lua-srpm-macros-1-8.fc38.noarch 142/152 Installing : rpmautospec-rpm-macros-0.3.5-1.fc38.noarch 143/152 Installing : ansible-srpm-macros-1-9.1.fc38.noarch 144/152 Installing : fonts-srpm-macros-1:2.0.5-11.fc38.noarch 145/152 Installing : go-srpm-macros-3.2.0-2.fc38.noarch 146/152 Installing : python-srpm-macros-3.11-10.fc39.noarch 147/152 Installing : redhat-rpm-config-253-1.fc39.noarch 148/152 Installing : rpm-build-4.18.1-1.fc39.x86_64 149/152 Installing : util-linux-2.38.1-4.fc38.x86_64 150/152 Installing : which-2.21-39.fc39.x86_64 151/152 Installing : info-7.0.2-2.fc39.x86_64 152/152 Running scriptlet: filesystem-3.18-4.fc39.x86_64 152/152 Running scriptlet: ca-certificates-2023.2.60-2.fc38.noarch 152/152 Running scriptlet: authselect-libs-1.4.2-2.fc38.x86_64 152/152 Running scriptlet: rpm-4.18.1-1.fc39.x86_64 152/152 Running scriptlet: info-7.0.2-2.fc39.x86_64 152/152 Verifying : alternatives-1.21-2.fc38.x86_64 1/152 Verifying : ansible-srpm-macros-1-9.1.fc38.noarch 2/152 Verifying : audit-libs-3.1-2.fc39.x86_64 3/152 Verifying : authselect-1.4.2-2.fc38.x86_64 4/152 Verifying : authselect-libs-1.4.2-2.fc38.x86_64 5/152 Verifying : basesystem-11-15.fc38.noarch 6/152 Verifying : bash-5.2.15-3.fc38.x86_64 7/152 Verifying : binutils-2.40-5.fc39.x86_64 8/152 Verifying : binutils-gold-2.40-5.fc39.x86_64 9/152 Verifying : bzip2-1.0.8-13.fc38.x86_64 10/152 Verifying : bzip2-libs-1.0.8-13.fc38.x86_64 11/152 Verifying : ca-certificates-2023.2.60-2.fc38.noarch 12/152 Verifying : coreutils-9.1-11.fc38.x86_64 13/152 Verifying : coreutils-common-9.1-11.fc38.x86_64 14/152 Verifying : cpio-2.13-14.fc38.x86_64 15/152 Verifying : cracklib-2.9.7-31.fc38.x86_64 16/152 Verifying : crypto-policies-20230301-1.gita12f7b2.fc39.noarc 17/152 Verifying : curl-8.0.1-1.fc39.x86_64 18/152 Verifying : cyrus-sasl-lib-2.1.28-9.fc38.x86_64 19/152 Verifying : debugedit-5.0-7.fc38.x86_64 20/152 Verifying : diffutils-3.9-3.fc39.x86_64 21/152 Verifying : dwz-0.15-2.fc38.x86_64 22/152 Verifying : ed-1.19-2.fc38.x86_64 23/152 Verifying : efi-srpm-macros-5-7.fc38.noarch 24/152 Verifying : elfutils-0.189-1.fc39.x86_64 25/152 Verifying : elfutils-debuginfod-client-0.189-1.fc39.x86_64 26/152 Verifying : elfutils-default-yama-scope-0.189-1.fc39.noarch 27/152 Verifying : elfutils-libelf-0.189-1.fc39.x86_64 28/152 Verifying : elfutils-libs-0.189-1.fc39.x86_64 29/152 Verifying : fedora-gpg-keys-39-0.1.noarch 30/152 Verifying : fedora-release-39-0.5.noarch 31/152 Verifying : fedora-release-common-39-0.5.noarch 32/152 Verifying : fedora-release-identity-basic-39-0.5.noarch 33/152 Verifying : fedora-repos-39-0.1.noarch 34/152 Verifying : fedora-repos-rawhide-39-0.1.noarch 35/152 Verifying : file-5.44-3.fc39.x86_64 36/152 Verifying : file-libs-5.44-3.fc39.x86_64 37/152 Verifying : filesystem-3.18-4.fc39.x86_64 38/152 Verifying : findutils-1:4.9.0-3.fc38.x86_64 39/152 Verifying : fonts-srpm-macros-1:2.0.5-11.fc38.noarch 40/152 Verifying : fpc-srpm-macros-1.3-7.fc38.noarch 41/152 Verifying : gawk-5.1.1-5.fc38.x86_64 42/152 Verifying : gdb-minimal-13.1-1.fc39.x86_64 43/152 Verifying : gdbm-libs-1:1.23-3.fc38.x86_64 44/152 Verifying : ghc-srpm-macros-1.6.1-1.fc38.noarch 45/152 Verifying : glibc-2.37.9000-3.fc39.x86_64 46/152 Verifying : glibc-common-2.37.9000-3.fc39.x86_64 47/152 Verifying : glibc-gconv-extra-2.37.9000-3.fc39.x86_64 48/152 Verifying : glibc-minimal-langpack-2.37.9000-3.fc39.x86_64 49/152 Verifying : gmp-1:6.2.1-4.fc38.x86_64 50/152 Verifying : gnat-srpm-macros-6-2.fc38.noarch 51/152 Verifying : go-srpm-macros-3.2.0-2.fc38.noarch 52/152 Verifying : grep-3.9-1.fc39.x86_64 53/152 Verifying : gzip-1.12-3.fc38.x86_64 54/152 Verifying : info-7.0.2-2.fc39.x86_64 55/152 Verifying : jansson-2.13.1-6.fc38.x86_64 56/152 Verifying : kernel-srpm-macros-1.0-16.fc38.noarch 57/152 Verifying : keyutils-libs-1.6.1-6.fc38.x86_64 58/152 Verifying : krb5-libs-1.20.1-9.fc39.x86_64 59/152 Verifying : libacl-2.3.1-7.fc39.x86_64 60/152 Verifying : libarchive-3.6.1-5.fc39.x86_64 61/152 Verifying : libattr-2.5.1-7.fc39.x86_64 62/152 Verifying : libblkid-2.38.1-4.fc38.x86_64 63/152 Verifying : libbrotli-1.0.9-11.fc38.x86_64 64/152 Verifying : libcap-2.48-6.fc38.x86_64 65/152 Verifying : libcap-ng-0.8.3-5.fc38.x86_64 66/152 Verifying : libcom_err-1.46.5-4.fc38.x86_64 67/152 Verifying : libcurl-8.0.1-1.fc39.x86_64 68/152 Verifying : libdb-5.3.28-55.fc38.x86_64 69/152 Verifying : libeconf-0.4.0-5.fc38.x86_64 70/152 Verifying : libevent-2.1.12-8.fc38.x86_64 71/152 Verifying : libfdisk-2.38.1-4.fc38.x86_64 72/152 Verifying : libffi-3.4.4-2.fc38.x86_64 73/152 Verifying : libgcc-13.0.1-0.8.fc39.x86_64 74/152 Verifying : libgomp-13.0.1-0.8.fc39.x86_64 75/152 Verifying : libidn2-2.3.4-2.fc38.x86_64 76/152 Verifying : libmount-2.38.1-4.fc38.x86_64 77/152 Verifying : libnghttp2-1.52.0-1.fc39.x86_64 78/152 Verifying : libnsl2-2.0.0-5.fc38.x86_64 79/152 Verifying : libpkgconf-1.9.4-1.fc39.x86_64 80/152 Verifying : libpsl-0.21.2-2.fc38.x86_64 81/152 Verifying : libpwquality-1.4.5-3.fc38.x86_64 82/152 Verifying : libselinux-3.5-1.fc39.x86_64 83/152 Verifying : libsemanage-3.5-1.fc39.x86_64 84/152 Verifying : libsepol-3.5-1.fc39.x86_64 85/152 Verifying : libsigsegv-2.14-4.fc38.x86_64 86/152 Verifying : libsmartcols-2.38.1-4.fc38.x86_64 87/152 Verifying : libssh-0.10.4-4.fc39.x86_64 88/152 Verifying : libssh-config-0.10.4-4.fc39.noarch 89/152 Verifying : libstdc++-13.0.1-0.8.fc39.x86_64 90/152 Verifying : libtasn1-4.19.0-2.fc38.x86_64 91/152 Verifying : libtirpc-1.3.3-1.fc38.x86_64 92/152 Verifying : libunistring1.0-1.0-1.fc38.x86_64 93/152 Verifying : libutempter-1.2.1-9.fc39.x86_64 94/152 Verifying : libuuid-2.38.1-4.fc38.x86_64 95/152 Verifying : libverto-0.3.2-5.fc38.x86_64 96/152 Verifying : libxcrypt-4.4.33-7.fc39.x86_64 97/152 Verifying : libxml2-2.10.3-3.fc38.x86_64 98/152 Verifying : libzstd-1.5.4-1.fc39.x86_64 99/152 Verifying : lua-libs-5.4.4-9.fc39.x86_64 100/152 Verifying : lua-srpm-macros-1-8.fc38.noarch 101/152 Verifying : lz4-libs-1.9.4-2.fc38.x86_64 102/152 Verifying : mpfr-4.1.1-3.fc38.x86_64 103/152 Verifying : ncurses-base-6.4-3.20230114.fc38.noarch 104/152 Verifying : ncurses-libs-6.4-3.20230114.fc38.x86_64 105/152 Verifying : ocaml-srpm-macros-7-3.fc38.noarch 106/152 Verifying : openblas-srpm-macros-2-13.fc38.noarch 107/152 Verifying : openldap-2.6.4-1.fc39.x86_64 108/152 Verifying : openssl-libs-1:3.0.8-1.fc39.x86_64 109/152 Verifying : p11-kit-0.24.1-6.fc38.x86_64 110/152 Verifying : p11-kit-trust-0.24.1-6.fc38.x86_64 111/152 Verifying : package-notes-srpm-macros-0.5-7.fc38.noarch 112/152 Verifying : pam-1.5.2-17.fc39.x86_64 113/152 Verifying : pam-libs-1.5.2-17.fc39.x86_64 114/152 Verifying : patch-2.7.6-20.fc39.x86_64 115/152 Verifying : pcre2-10.42-1.fc38.1.x86_64 116/152 Verifying : pcre2-syntax-10.42-1.fc38.1.noarch 117/152 Verifying : perl-srpm-macros-1-48.fc38.noarch 118/152 Verifying : pkgconf-1.9.4-1.fc39.x86_64 119/152 Verifying : pkgconf-m4-1.9.4-1.fc39.noarch 120/152 Verifying : pkgconf-pkg-config-1.9.4-1.fc39.x86_64 121/152 Verifying : popt-1.19-2.fc38.x86_64 122/152 Verifying : publicsuffix-list-dafsa-20221208-2.fc38.noarch 123/152 Verifying : pyproject-srpm-macros-1.6.3-1.fc39.noarch 124/152 Verifying : python-srpm-macros-3.11-10.fc39.noarch 125/152 Verifying : qt5-srpm-macros-5.15.8-2.fc38.noarch 126/152 Verifying : readline-8.2-3.fc38.x86_64 127/152 Verifying : redhat-rpm-config-253-1.fc39.noarch 128/152 Verifying : rpm-4.18.1-1.fc39.x86_64 129/152 Verifying : rpm-build-4.18.1-1.fc39.x86_64 130/152 Verifying : rpm-build-libs-4.18.1-1.fc39.x86_64 131/152 Verifying : rpm-libs-4.18.1-1.fc39.x86_64 132/152 Verifying : rpm-sequoia-1.3.0-1.fc39.x86_64 133/152 Verifying : rpmautospec-rpm-macros-0.3.5-1.fc38.noarch 134/152 Verifying : rust-srpm-macros-24-1.fc39.noarch 135/152 Verifying : sed-4.8-12.fc38.x86_64 136/152 Verifying : setup-2.14.3-3.fc39.noarch 137/152 Verifying : shadow-utils-2:4.13-6.fc39.x86_64 138/152 Verifying : sqlite-libs-3.40.1-2.fc38.x86_64 139/152 Verifying : systemd-libs-253.1-4.fc39.x86_64 140/152 Verifying : tar-2:1.34-7.fc38.x86_64 141/152 Verifying : tzdata-2022g-2.fc38.noarch 142/152 Verifying : unzip-6.0-60.fc38.x86_64 143/152 Verifying : util-linux-2.38.1-4.fc38.x86_64 144/152 Verifying : util-linux-core-2.38.1-4.fc38.x86_64 145/152 Verifying : which-2.21-39.fc39.x86_64 146/152 Verifying : xxhash-libs-0.8.1-4.fc38.x86_64 147/152 Verifying : xz-5.4.1-1.fc38.x86_64 148/152 Verifying : xz-libs-5.4.1-1.fc38.x86_64 149/152 Verifying : zip-3.0-36.fc38.x86_64 150/152 Verifying : zlib-1.2.13-3.fc38.x86_64 151/152 Verifying : zstd-1.5.4-1.fc39.x86_64 152/152 Installed: alternatives-1.21-2.fc38.x86_64 ansible-srpm-macros-1-9.1.fc38.noarch audit-libs-3.1-2.fc39.x86_64 authselect-1.4.2-2.fc38.x86_64 authselect-libs-1.4.2-2.fc38.x86_64 basesystem-11-15.fc38.noarch bash-5.2.15-3.fc38.x86_64 binutils-2.40-5.fc39.x86_64 binutils-gold-2.40-5.fc39.x86_64 bzip2-1.0.8-13.fc38.x86_64 bzip2-libs-1.0.8-13.fc38.x86_64 ca-certificates-2023.2.60-2.fc38.noarch coreutils-9.1-11.fc38.x86_64 coreutils-common-9.1-11.fc38.x86_64 cpio-2.13-14.fc38.x86_64 cracklib-2.9.7-31.fc38.x86_64 crypto-policies-20230301-1.gita12f7b2.fc39.noarch curl-8.0.1-1.fc39.x86_64 cyrus-sasl-lib-2.1.28-9.fc38.x86_64 debugedit-5.0-7.fc38.x86_64 diffutils-3.9-3.fc39.x86_64 dwz-0.15-2.fc38.x86_64 ed-1.19-2.fc38.x86_64 efi-srpm-macros-5-7.fc38.noarch elfutils-0.189-1.fc39.x86_64 elfutils-debuginfod-client-0.189-1.fc39.x86_64 elfutils-default-yama-scope-0.189-1.fc39.noarch elfutils-libelf-0.189-1.fc39.x86_64 elfutils-libs-0.189-1.fc39.x86_64 fedora-gpg-keys-39-0.1.noarch fedora-release-39-0.5.noarch fedora-release-common-39-0.5.noarch fedora-release-identity-basic-39-0.5.noarch fedora-repos-39-0.1.noarch fedora-repos-rawhide-39-0.1.noarch file-5.44-3.fc39.x86_64 file-libs-5.44-3.fc39.x86_64 filesystem-3.18-4.fc39.x86_64 findutils-1:4.9.0-3.fc38.x86_64 fonts-srpm-macros-1:2.0.5-11.fc38.noarch fpc-srpm-macros-1.3-7.fc38.noarch gawk-5.1.1-5.fc38.x86_64 gdb-minimal-13.1-1.fc39.x86_64 gdbm-libs-1:1.23-3.fc38.x86_64 ghc-srpm-macros-1.6.1-1.fc38.noarch glibc-2.37.9000-3.fc39.x86_64 glibc-common-2.37.9000-3.fc39.x86_64 glibc-gconv-extra-2.37.9000-3.fc39.x86_64 glibc-minimal-langpack-2.37.9000-3.fc39.x86_64 gmp-1:6.2.1-4.fc38.x86_64 gnat-srpm-macros-6-2.fc38.noarch go-srpm-macros-3.2.0-2.fc38.noarch grep-3.9-1.fc39.x86_64 gzip-1.12-3.fc38.x86_64 info-7.0.2-2.fc39.x86_64 jansson-2.13.1-6.fc38.x86_64 kernel-srpm-macros-1.0-16.fc38.noarch keyutils-libs-1.6.1-6.fc38.x86_64 krb5-libs-1.20.1-9.fc39.x86_64 libacl-2.3.1-7.fc39.x86_64 libarchive-3.6.1-5.fc39.x86_64 libattr-2.5.1-7.fc39.x86_64 libblkid-2.38.1-4.fc38.x86_64 libbrotli-1.0.9-11.fc38.x86_64 libcap-2.48-6.fc38.x86_64 libcap-ng-0.8.3-5.fc38.x86_64 libcom_err-1.46.5-4.fc38.x86_64 libcurl-8.0.1-1.fc39.x86_64 libdb-5.3.28-55.fc38.x86_64 libeconf-0.4.0-5.fc38.x86_64 libevent-2.1.12-8.fc38.x86_64 libfdisk-2.38.1-4.fc38.x86_64 libffi-3.4.4-2.fc38.x86_64 libgcc-13.0.1-0.8.fc39.x86_64 libgomp-13.0.1-0.8.fc39.x86_64 libidn2-2.3.4-2.fc38.x86_64 libmount-2.38.1-4.fc38.x86_64 libnghttp2-1.52.0-1.fc39.x86_64 libnsl2-2.0.0-5.fc38.x86_64 libpkgconf-1.9.4-1.fc39.x86_64 libpsl-0.21.2-2.fc38.x86_64 libpwquality-1.4.5-3.fc38.x86_64 libselinux-3.5-1.fc39.x86_64 libsemanage-3.5-1.fc39.x86_64 libsepol-3.5-1.fc39.x86_64 libsigsegv-2.14-4.fc38.x86_64 libsmartcols-2.38.1-4.fc38.x86_64 libssh-0.10.4-4.fc39.x86_64 libssh-config-0.10.4-4.fc39.noarch libstdc++-13.0.1-0.8.fc39.x86_64 libtasn1-4.19.0-2.fc38.x86_64 libtirpc-1.3.3-1.fc38.x86_64 libunistring1.0-1.0-1.fc38.x86_64 libutempter-1.2.1-9.fc39.x86_64 libuuid-2.38.1-4.fc38.x86_64 libverto-0.3.2-5.fc38.x86_64 libxcrypt-4.4.33-7.fc39.x86_64 libxml2-2.10.3-3.fc38.x86_64 libzstd-1.5.4-1.fc39.x86_64 lua-libs-5.4.4-9.fc39.x86_64 lua-srpm-macros-1-8.fc38.noarch lz4-libs-1.9.4-2.fc38.x86_64 mpfr-4.1.1-3.fc38.x86_64 ncurses-base-6.4-3.20230114.fc38.noarch ncurses-libs-6.4-3.20230114.fc38.x86_64 ocaml-srpm-macros-7-3.fc38.noarch openblas-srpm-macros-2-13.fc38.noarch openldap-2.6.4-1.fc39.x86_64 openssl-libs-1:3.0.8-1.fc39.x86_64 p11-kit-0.24.1-6.fc38.x86_64 p11-kit-trust-0.24.1-6.fc38.x86_64 package-notes-srpm-macros-0.5-7.fc38.noarch pam-1.5.2-17.fc39.x86_64 pam-libs-1.5.2-17.fc39.x86_64 patch-2.7.6-20.fc39.x86_64 pcre2-10.42-1.fc38.1.x86_64 pcre2-syntax-10.42-1.fc38.1.noarch perl-srpm-macros-1-48.fc38.noarch pkgconf-1.9.4-1.fc39.x86_64 pkgconf-m4-1.9.4-1.fc39.noarch pkgconf-pkg-config-1.9.4-1.fc39.x86_64 popt-1.19-2.fc38.x86_64 publicsuffix-list-dafsa-20221208-2.fc38.noarch pyproject-srpm-macros-1.6.3-1.fc39.noarch python-srpm-macros-3.11-10.fc39.noarch qt5-srpm-macros-5.15.8-2.fc38.noarch readline-8.2-3.fc38.x86_64 redhat-rpm-config-253-1.fc39.noarch rpm-4.18.1-1.fc39.x86_64 rpm-build-4.18.1-1.fc39.x86_64 rpm-build-libs-4.18.1-1.fc39.x86_64 rpm-libs-4.18.1-1.fc39.x86_64 rpm-sequoia-1.3.0-1.fc39.x86_64 rpmautospec-rpm-macros-0.3.5-1.fc38.noarch rust-srpm-macros-24-1.fc39.noarch sed-4.8-12.fc38.x86_64 setup-2.14.3-3.fc39.noarch shadow-utils-2:4.13-6.fc39.x86_64 sqlite-libs-3.40.1-2.fc38.x86_64 systemd-libs-253.1-4.fc39.x86_64 tar-2:1.34-7.fc38.x86_64 tzdata-2022g-2.fc38.noarch unzip-6.0-60.fc38.x86_64 util-linux-2.38.1-4.fc38.x86_64 util-linux-core-2.38.1-4.fc38.x86_64 which-2.21-39.fc39.x86_64 xxhash-libs-0.8.1-4.fc38.x86_64 xz-5.4.1-1.fc38.x86_64 xz-libs-5.4.1-1.fc38.x86_64 zip-3.0-36.fc38.x86_64 zlib-1.2.13-3.fc38.x86_64 zstd-1.5.4-1.fc39.x86_64 Complete! Finish: dnf install Start: creating root cache Finish: creating root cache Finish: chroot init INFO: Installed packages: INFO: pam-1.5.2-17.fc39.x86_64 findutils-4.9.0-3.fc38.x86_64 authselect-libs-1.4.2-2.fc38.x86_64 ghc-srpm-macros-1.6.1-1.fc38.noarch libpsl-0.21.2-2.fc38.x86_64 keyutils-libs-1.6.1-6.fc38.x86_64 authselect-1.4.2-2.fc38.x86_64 p11-kit-0.24.1-6.fc38.x86_64 libffi-3.4.4-2.fc38.x86_64 libcap-2.48-6.fc38.x86_64 pcre2-10.42-1.fc38.1.x86_64 rpm-libs-4.18.1-1.fc39.x86_64 libuuid-2.38.1-4.fc38.x86_64 bzip2-libs-1.0.8-13.fc38.x86_64 libssh-0.10.4-4.fc39.x86_64 libeconf-0.4.0-5.fc38.x86_64 pkgconf-m4-1.9.4-1.fc39.noarch ansible-srpm-macros-1-9.1.fc38.noarch libidn2-2.3.4-2.fc38.x86_64 libblkid-2.38.1-4.fc38.x86_64 ocaml-srpm-macros-7-3.fc38.noarch pam-libs-1.5.2-17.fc39.x86_64 xxhash-libs-0.8.1-4.fc38.x86_64 gmp-6.2.1-4.fc38.x86_64 diffutils-3.9-3.fc39.x86_64 pcre2-syntax-10.42-1.fc38.1.noarch systemd-libs-253.1-4.fc39.x86_64 cracklib-2.9.7-31.fc38.x86_64 libxml2-2.10.3-3.fc38.x86_64 libmount-2.38.1-4.fc38.x86_64 efi-srpm-macros-5-7.fc38.noarch util-linux-2.38.1-4.fc38.x86_64 libattr-2.5.1-7.fc39.x86_64 setup-2.14.3-3.fc39.noarch info-7.0.2-2.fc39.x86_64 libdb-5.3.28-55.fc38.x86_64 rust-srpm-macros-24-1.fc39.noarch gdbm-libs-1.23-3.fc38.x86_64 libpkgconf-1.9.4-1.fc39.x86_64 zstd-1.5.4-1.fc39.x86_64 libcom_err-1.46.5-4.fc38.x86_64 fedora-release-common-39-0.5.noarch sqlite-libs-3.40.1-2.fc38.x86_64 coreutils-common-9.1-11.fc38.x86_64 jansson-2.13.1-6.fc38.x86_64 libacl-2.3.1-7.fc39.x86_64 libselinux-3.5-1.fc39.x86_64 krb5-libs-1.20.1-9.fc39.x86_64 gnat-srpm-macros-6-2.fc38.noarch qt5-srpm-macros-5.15.8-2.fc38.noarch fedora-gpg-keys-39-0.1.noarch libnsl2-2.0.0-5.fc38.x86_64 file-libs-5.44-3.fc39.x86_64 gpg-pubkey-18b8e74c-62f2920f libsmartcols-2.38.1-4.fc38.x86_64 elfutils-default-yama-scope-0.189-1.fc39.noarch popt-1.19-2.fc38.x86_64 elfutils-0.189-1.fc39.x86_64 openblas-srpm-macros-2-13.fc38.noarch kernel-srpm-macros-1.0-16.fc38.noarch tar-1.34-7.fc38.x86_64 libverto-0.3.2-5.fc38.x86_64 glibc-minimal-langpack-2.37.9000-3.fc39.x86_64 fedora-release-identity-basic-39-0.5.noarch ncurses-base-6.4-3.20230114.fc38.noarch fedora-release-39-0.5.noarch gdb-minimal-13.1-1.fc39.x86_64 pkgconf-1.9.4-1.fc39.x86_64 shadow-utils-4.13-6.fc39.x86_64 libsepol-3.5-1.fc39.x86_64 libsigsegv-2.14-4.fc38.x86_64 libutempter-1.2.1-9.fc39.x86_64 elfutils-libs-0.189-1.fc39.x86_64 bash-5.2.15-3.fc38.x86_64 alternatives-1.21-2.fc38.x86_64 ed-1.19-2.fc38.x86_64 libcurl-8.0.1-1.fc39.x86_64 fpc-srpm-macros-1.3-7.fc38.noarch elfutils-libelf-0.189-1.fc39.x86_64 openldap-2.6.4-1.fc39.x86_64 libstdc++-13.0.1-0.8.fc39.x86_64 rpm-build-libs-4.18.1-1.fc39.x86_64 glibc-gconv-extra-2.37.9000-3.fc39.x86_64 p11-kit-trust-0.24.1-6.fc38.x86_64 dwz-0.15-2.fc38.x86_64 xz-5.4.1-1.fc38.x86_64 python-srpm-macros-3.11-10.fc39.noarch curl-8.0.1-1.fc39.x86_64 ca-certificates-2023.2.60-2.fc38.noarch perl-srpm-macros-1-48.fc38.noarch fedora-repos-rawhide-39-0.1.noarch libtirpc-1.3.3-1.fc38.x86_64 libfdisk-2.38.1-4.fc38.x86_64 zip-3.0-36.fc38.x86_64 libsemanage-3.5-1.fc39.x86_64 filesystem-3.18-4.fc39.x86_64 lua-libs-5.4.4-9.fc39.x86_64 basesystem-11-15.fc38.noarch unzip-6.0-60.fc38.x86_64 binutils-gold-2.40-5.fc39.x86_64 zlib-1.2.13-3.fc38.x86_64 libzstd-1.5.4-1.fc39.x86_64 libunistring1.0-1.0-1.fc38.x86_64 libbrotli-1.0.9-11.fc38.x86_64 publicsuffix-list-dafsa-20221208-2.fc38.noarch libtasn1-4.19.0-2.fc38.x86_64 lz4-libs-1.9.4-2.fc38.x86_64 rpm-sequoia-1.3.0-1.fc39.x86_64 xz-libs-5.4.1-1.fc38.x86_64 readline-8.2-3.fc38.x86_64 libnghttp2-1.52.0-1.fc39.x86_64 gzip-1.12-3.fc38.x86_64 libpwquality-1.4.5-3.fc38.x86_64 sed-4.8-12.fc38.x86_64 go-srpm-macros-3.2.0-2.fc38.noarch elfutils-debuginfod-client-0.189-1.fc39.x86_64 debugedit-5.0-7.fc38.x86_64 tzdata-2022g-2.fc38.noarch util-linux-core-2.38.1-4.fc38.x86_64 crypto-policies-20230301-1.gita12f7b2.fc39.noarch glibc-2.37.9000-3.fc39.x86_64 gawk-5.1.1-5.fc38.x86_64 gpg-pubkey-eb10b464-6202d9c6 coreutils-9.1-11.fc38.x86_64 libarchive-3.6.1-5.fc39.x86_64 pyproject-srpm-macros-1.6.3-1.fc39.noarch binutils-2.40-5.fc39.x86_64 lua-srpm-macros-1-8.fc38.noarch libcap-ng-0.8.3-5.fc38.x86_64 rpmautospec-rpm-macros-0.3.5-1.fc38.noarch rpm-build-4.18.1-1.fc39.x86_64 redhat-rpm-config-253-1.fc39.noarch glibc-common-2.37.9000-3.fc39.x86_64 pkgconf-pkg-config-1.9.4-1.fc39.x86_64 file-5.44-3.fc39.x86_64 openssl-libs-3.0.8-1.fc39.x86_64 audit-libs-3.1-2.fc39.x86_64 which-2.21-39.fc39.x86_64 libgcc-13.0.1-0.8.fc39.x86_64 patch-2.7.6-20.fc39.x86_64 grep-3.9-1.fc39.x86_64 fonts-srpm-macros-2.0.5-11.fc38.noarch libssh-config-0.10.4-4.fc39.noarch ncurses-libs-6.4-3.20230114.fc38.x86_64 bzip2-1.0.8-13.fc38.x86_64 cyrus-sasl-lib-2.1.28-9.fc38.x86_64 fedora-repos-39-0.1.noarch mpfr-4.1.1-3.fc38.x86_64 package-notes-srpm-macros-0.5-7.fc38.noarch rpm-4.18.1-1.fc39.x86_64 cpio-2.13-14.fc38.x86_64 libgomp-13.0.1-0.8.fc39.x86_64 libevent-2.1.12-8.fc38.x86_64 libxcrypt-4.4.33-7.fc39.x86_64 Start: buildsrpm Start: rpmbuild -bs sh: line 1: /usr/bin/python3: No such file or directory warning: Macro expanded in comment on line 17: (c=%{commit}; echo ${c:0:10}) Building target platforms: x86_64 Building for target x86_64 setting SOURCE_DATE_EPOCH=1676851200 Wrote: /builddir/build/SRPMS/freecad-0.20.2-4.fc39.src.rpm RPM build warnings: Macro expanded in comment on line 17: (c=%{commit}; echo ${c:0:10}) Finish: rpmbuild -bs cp: ‘var/lib/mock/fedora-rawhide-x86_64-1679462631.716718/root/var/log’: No such file or directory INFO: chroot_scan: 3 files copied to /var/lib/copr-rpmbuild/results/chroot_scan INFO: /var/lib/mock/fedora-rawhide-x86_64-1679462631.716718/root/var/log/dnf.rpm.log /var/lib/mock/fedora-rawhide-x86_64-1679462631.716718/root/var/log/dnf.librepo.log /var/lib/mock/fedora-rawhide-x86_64-1679462631.716718/root/var/log/dnf.log Finish: buildsrpm INFO: Done(/var/lib/copr-rpmbuild/workspace/workdir-huuvom22/freecad/freecad.spec) Config(child) 3 minutes 19 seconds INFO: Results and/or logs in: /var/lib/copr-rpmbuild/results INFO: Cleaning up build root ('cleanup_on_success=True') Start: clean chroot INFO: unmounting tmpfs. Finish: clean chroot Finish: run Running (timeout=96000): unbuffer mock --rebuild /var/lib/copr-rpmbuild/results/freecad-0.20.2-4.fc39.src.rpm --resultdir /var/lib/copr-rpmbuild/results --uniqueext 1679462631.716718 -r /var/lib/copr-rpmbuild/results/configs/child.cfg INFO: mock.py version 3.5 starting (python version = 3.11.0, NVR = mock-3.5-1.fc37)... Start(bootstrap): init plugins INFO: tmpfs initialized INFO: selinux enabled INFO: chroot_scan: initialized INFO: compress_logs: initialized Finish(bootstrap): init plugins Start: init plugins INFO: tmpfs initialized INFO: selinux enabled INFO: chroot_scan: initialized INFO: compress_logs: initialized Finish: init plugins INFO: Signal handler active Start: run INFO: Start(/var/lib/copr-rpmbuild/results/freecad-0.20.2-4.fc39.src.rpm) Config(fedora-rawhide-x86_64) Start: clean chroot Finish: clean chroot Start(bootstrap): chroot init INFO: mounting tmpfs at /var/lib/mock/fedora-rawhide-x86_64-bootstrap-1679462631.716718/root. INFO: reusing tmpfs at /var/lib/mock/fedora-rawhide-x86_64-bootstrap-1679462631.716718/root. INFO: calling preinit hooks INFO: enabled root cache INFO: enabled package manager cache Start(bootstrap): cleaning package manager metadata Finish(bootstrap): cleaning package manager metadata INFO: enabled HW Info plugin Mock Version: 3.5 INFO: Mock Version: 3.5 Finish(bootstrap): chroot init Start: chroot init INFO: mounting tmpfs at /var/lib/mock/fedora-rawhide-x86_64-1679462631.716718/root. INFO: calling preinit hooks INFO: enabled root cache Start: unpacking root cache Finish: unpacking root cache INFO: enabled package manager cache Start: cleaning package manager metadata Finish: cleaning package manager metadata INFO: enabled HW Info plugin Mock Version: 3.5 INFO: Mock Version: 3.5 Start: dnf update No matches found for the following disable plugin patterns: local, spacewalk, versionlock Copr repository 56 kB/s | 3.0 kB 00:00 fedora 473 kB/s | 21 kB 00:00 Dependencies resolved. Nothing to do. Complete! Finish: dnf update Finish: chroot init Start: build phase for freecad-0.20.2-4.fc39.src.rpm Start: build setup for freecad-0.20.2-4.fc39.src.rpm sh: line 1: /usr/bin/python3: No such file or directory warning: Macro expanded in comment on line 17: (c=%{commit}; echo ${c:0:10}) Building target platforms: x86_64 Building for target x86_64 setting SOURCE_DATE_EPOCH=1676851200 Wrote: /builddir/build/SRPMS/freecad-0.20.2-4.fc39.src.rpm RPM build warnings: Macro expanded in comment on line 17: (c=%{commit}; echo ${c:0:10}) No matches found for the following disable plugin patterns: local, spacewalk, versionlock Copr repository 62 kB/s | 3.0 kB 00:00 fedora 485 kB/s | 21 kB 00:00 Dependencies resolved. =================================================================================================== Package Arch Version Repo Size =================================================================================================== Installing: Coin4-devel x86_64 4.0.0-12.fc38 fedora 3.2 M boost-devel x86_64 1.81.0-1.fc39 fedora 14 M cmake x86_64 3.26.0-1.fc39 fedora 6.9 M desktop-file-utils x86_64 0.26-8.fc38 fedora 71 k dos2unix x86_64 7.4.4-2.fc39 fedora 289 k doxygen x86_64 2:1.9.6-7.fc39 fedora 4.8 M eigen3-devel noarch 3.4.0-9.fc38 fedora 1.2 M freeimage-devel x86_64 3.19.0-0.13.svn1889.fc38 fedora 41 k gcc-c++ x86_64 13.0.1-0.8.fc39 fedora 13 M gcc-gfortran x86_64 13.0.1-0.8.fc39 fedora 12 M gettext x86_64 0.21.1-2.fc38 fedora 1.0 M graphviz x86_64 7.1.0-2.fc38 fedora 5.0 M libXmu-devel x86_64 1.1.4-2.fc38 fedora 27 k libappstream-glib x86_64 0.8.2-2.fc38 fedora 402 k libglvnd-devel x86_64 1:1.6.0-2.fc38 fedora 163 k libicu-devel x86_64 72.1-2.fc38 fedora 918 k libkdtree++-devel noarch 0.7.0-34.fc38 fedora 30 k libspnav-devel x86_64 1.0-3.fc38 fedora 20 k med-devel x86_64 4.1.0-11.fc38 fedora 49 k mesa-libGL-devel x86_64 23.0.0-1.fc39 fedora 36 k mesa-libGLU-devel x86_64 9.0.1-8.fc38 fedora 13 k opencascade-devel x86_64 7.6.3-3.fc38 fedora 5.1 M pyside2-tools x86_64 1:5.15.7-2.fc38 fedora 85 k python3-devel x86_64 3.11.2-1.fc39 fedora 269 k python3-matplotlib x86_64 3.7.1-1.fc39 fedora 4.3 M python3-pivy x86_64 0.6.8-2.fc38 fedora 2.4 M python3-pycxx-devel noarch 7.1.7-4.fc38 fedora 73 k python3-pyside2-devel x86_64 1:5.15.7-2.fc38 fedora 228 k python3-shiboken2-devel x86_64 1:5.15.7-2.fc38 fedora 56 k qt5-qtbase-devel x86_64 5.15.8-7.fc39 fedora 3.5 M qt5-qtsvg-devel x86_64 5.15.8-2.fc38 fedora 32 k qt5-qttools-static x86_64 5.15.8-2.fc38 fedora 211 k qt5-qtwebengine-devel x86_64 5.15.12-4.fc39 fedora 116 k qt5-qtxmlpatterns-devel x86_64 5.15.8-2.fc38 fedora 366 k swig x86_64 4.1.1-4.fc38 fedora 1.6 M tbb-devel x86_64 2020.3-16.fc39 fedora 335 k vtk-devel x86_64 9.2.6-2.fc39 fedora 68 M xerces-c x86_64 3.2.3-8.fc38 fedora 963 k xerces-c-devel x86_64 3.2.3-8.fc38 fedora 509 k zipios++-devel x86_64 0.1.5.9-30.fc38 fedora 7.7 M Installing dependencies: Coin4 x86_64 4.0.0-12.fc38 fedora 2.5 M LibRaw x86_64 0.21.1-3.fc39 fedora 417 k Lmod x86_64 8.7.20-1.fc39 fedora 259 k PEGTL-devel x86_64 2.8.3-6.fc38 fedora 159 k SoQt x86_64 1.6.0-12.fc38 fedora 226 k SuperLU x86_64 5.3.0-5.fc39 fedora 183 k adobe-mappings-cmap noarch 20230118-1.fc38 fedora 2.1 M adobe-mappings-cmap-deprecated noarch 20230118-1.fc38 fedora 113 k adobe-mappings-pdf noarch 20190401-3.fc38 fedora 698 k adwaita-cursor-theme noarch 44.0-1.fc39 fedora 633 k adwaita-icon-theme noarch 44.0-1.fc39 fedora 1.1 M alsa-lib x86_64 1.2.8-3.fc38 fedora 516 k annobin-docs noarch 11.14-1.fc39 fedora 93 k annobin-plugin-gcc x86_64 11.14-1.fc39 fedora 892 k armadillo x86_64 10.8.2-3.fc38 fedora 34 k arpack x86_64 3.8.0-6.fc38 fedora 206 k assimp x86_64 5.0.1-10.fc38 fedora 3.0 M at-spi2-atk x86_64 2.48.0-1.fc39 fedora 86 k at-spi2-core x86_64 2.48.0-1.fc39 fedora 371 k atk x86_64 2.48.0-1.fc39 fedora 81 k autoconf noarch 2.71-5.fc38 fedora 733 k automake noarch 1.16.5-12.fc39 fedora 696 k avahi-libs x86_64 0.8-20.fc38 fedora 67 k blas x86_64 3.11.0-2.fc38 fedora 401 k blas-devel x86_64 3.11.0-2.fc38 fedora 25 k blas64 x86_64 3.11.0-2.fc38 fedora 230 k blas64_ x86_64 3.11.0-2.fc38 fedora 231 k blosc x86_64 1.21.2-2.fc38 fedora 54 k boost x86_64 1.81.0-1.fc39 fedora 14 k boost-atomic x86_64 1.81.0-1.fc39 fedora 20 k boost-chrono x86_64 1.81.0-1.fc39 fedora 26 k boost-container x86_64 1.81.0-1.fc39 fedora 40 k boost-context x86_64 1.81.0-1.fc39 fedora 17 k boost-contract x86_64 1.81.0-1.fc39 fedora 46 k boost-coroutine x86_64 1.81.0-1.fc39 fedora 20 k boost-date-time x86_64 1.81.0-1.fc39 fedora 16 k boost-fiber x86_64 1.81.0-1.fc39 fedora 42 k boost-filesystem x86_64 1.81.0-1.fc39 fedora 66 k boost-graph x86_64 1.81.0-1.fc39 fedora 151 k boost-iostreams x86_64 1.81.0-1.fc39 fedora 42 k boost-json x86_64 1.81.0-1.fc39 fedora 110 k boost-locale x86_64 1.81.0-1.fc39 fedora 222 k boost-log x86_64 1.81.0-1.fc39 fedora 491 k boost-math x86_64 1.81.0-1.fc39 fedora 221 k boost-nowide x86_64 1.81.0-1.fc39 fedora 21 k boost-numpy3 x86_64 1.81.0-1.fc39 fedora 30 k boost-program-options x86_64 1.81.0-1.fc39 fedora 109 k boost-python3 x86_64 1.81.0-1.fc39 fedora 97 k boost-random x86_64 1.81.0-1.fc39 fedora 24 k boost-regex x86_64 1.81.0-1.fc39 fedora 111 k boost-serialization x86_64 1.81.0-1.fc39 fedora 136 k boost-stacktrace x86_64 1.81.0-1.fc39 fedora 31 k boost-system x86_64 1.81.0-1.fc39 fedora 16 k boost-test x86_64 1.81.0-1.fc39 fedora 239 k boost-thread x86_64 1.81.0-1.fc39 fedora 58 k boost-timer x86_64 1.81.0-1.fc39 fedora 24 k boost-type_erasure x86_64 1.81.0-1.fc39 fedora 33 k boost-wave x86_64 1.81.0-1.fc39 fedora 225 k brotli x86_64 1.0.9-11.fc38 fedora 316 k brotli-devel x86_64 1.0.9-11.fc38 fedora 31 k bzip2-devel x86_64 1.0.8-13.fc38 fedora 214 k cairo x86_64 1.17.8-3.fc39 fedora 703 k cairo-gobject x86_64 1.17.8-3.fc39 fedora 18 k cdparanoia-libs x86_64 10.2-41.fc38 fedora 54 k cfitsio x86_64 4.2.0-3.fc38 fedora 607 k cgnslib x86_64 4.3.0-7.fc38 fedora 434 k cgnslib-common noarch 4.3.0-7.fc38 fedora 115 k cgnslib-devel x86_64 4.3.0-7.fc38 fedora 56 k cgnslib-libs x86_64 4.3.0-7.fc38 fedora 296 k clang-libs x86_64 15.0.7-2.fc38 fedora 21 M clang-resource-filesystem x86_64 15.0.7-2.fc38 fedora 13 k cli11-devel noarch 2.3.2-3.fc39 fedora 132 k cmake-data noarch 3.26.0-1.fc39 fedora 2.2 M cmake-filesystem x86_64 3.26.0-1.fc39 fedora 17 k cmake-rpm-macros noarch 3.26.0-1.fc39 fedora 16 k colord-libs x86_64 1.4.6-2.fc37 fedora 233 k copy-jdk-configs noarch 4.1-2.fc38 fedora 28 k cpp x86_64 13.0.1-0.8.fc39 fedora 11 M crypto-policies-scripts noarch 20230301-1.gita12f7b2.fc39 fedora 116 k cups-libs x86_64 1:2.4.2-10.fc39 fedora 267 k dbus x86_64 1:1.14.6-1.fc38 fedora 7.9 k dbus-broker x86_64 33-1.fc38 fedora 173 k dbus-common noarch 1:1.14.6-1.fc38 fedora 15 k dbus-libs x86_64 1:1.14.6-1.fc38 fedora 156 k dejavu-sans-fonts noarch 2.37-20.fc38 fedora 1.3 M double-conversion x86_64 3.1.5-8.fc38 fedora 49 k double-conversion-devel x86_64 3.1.5-8.fc38 fedora 27 k emacs-filesystem noarch 1:28.2-4.fc38 fedora 7.6 k expat x86_64 2.5.0-2.fc38 fedora 110 k expat-devel x86_64 2.5.0-2.fc38 fedora 52 k fdk-aac-free x86_64 2.0.0-10.fc38 fedora 336 k flac-libs x86_64 1.4.2-2.fc38 fedora 258 k flexiblas x86_64 3.3.0-2.fc38 fedora 32 k flexiblas-devel x86_64 3.3.0-2.fc38 fedora 116 k flexiblas-netlib x86_64 3.3.0-2.fc38 fedora 3.2 M flexiblas-netlib64 x86_64 3.3.0-2.fc38 fedora 3.1 M flexiblas-openblas-openmp x86_64 3.3.0-2.fc38 fedora 17 k flexiblas-openblas-openmp64 x86_64 3.3.0-2.fc38 fedora 17 k fontconfig x86_64 2.14.2-1.fc38 fedora 295 k fontconfig-devel x86_64 2.14.2-1.fc38 fedora 164 k fonts-filesystem noarch 1:2.0.5-11.fc38 fedora 8.1 k freeimage x86_64 3.19.0-0.13.svn1889.fc38 fedora 362 k freetype x86_64 2.13.0-1.fc39 fedora 413 k freetype-devel x86_64 2.13.0-1.fc39 fedora 946 k freexl x86_64 1.0.6-21.fc38 fedora 35 k fribidi x86_64 1.0.12-4.fc39 fedora 89 k gc x86_64 8.2.2-3.fc38 fedora 110 k gcc x86_64 13.0.1-0.8.fc39 fedora 34 M gcc-plugin-annobin x86_64 13.0.1-0.8.fc39 fedora 38 k gd x86_64 2.3.3-11.fc39 fedora 139 k gdal-devel x86_64 3.6.3-1.fc39 fedora 216 k gdal-libs x86_64 3.6.3-1.fc39 fedora 8.1 M gdk-pixbuf2 x86_64 2.42.10-2.fc38 fedora 485 k gdk-pixbuf2-modules x86_64 2.42.10-2.fc38 fedora 85 k geos x86_64 3.11.2-1.fc39 fedora 998 k gettext-envsubst x86_64 0.21.1-2.fc38 fedora 36 k gettext-libs x86_64 0.21.1-2.fc38 fedora 320 k gettext-runtime x86_64 0.21.1-2.fc38 fedora 117 k giflib x86_64 5.2.1-15.fc38 fedora 51 k gl-manpages noarch 1.1-26.20190306.fc38 fedora 1.2 M gl2ps x86_64 1.4.2-7.fc38 fedora 64 k gl2ps-devel x86_64 1.4.2-7.fc38 fedora 236 k glew-devel x86_64 2.2.0-4.fc38 fedora 222 k glib2 x86_64 2.76.0-1.fc39 fedora 2.8 M glib2-devel x86_64 2.76.0-1.fc39 fedora 587 k glibc-devel x86_64 2.37.9000-3.fc39 fedora 60 k glibc-headers-x86 noarch 2.37.9000-3.fc39 fedora 539 k glx-utils x86_64 8.5.0-1.fc38 fedora 40 k gnutls x86_64 3.8.0-3.fc39 fedora 1.1 M google-droid-sans-fonts noarch 20200215-14.fc38 fedora 2.7 M google-noto-fonts-common noarch 20230201-1.fc38 fedora 16 k google-noto-sans-vf-fonts noarch 20230201-1.fc38 fedora 580 k graphene x86_64 1.10.6-5.fc38 fedora 62 k graphite2 x86_64 1.3.14-11.fc38 fedora 95 k graphite2-devel x86_64 1.3.14-11.fc38 fedora 20 k groff-base x86_64 1.22.4-11.fc38 fedora 1.1 M gsm x86_64 1.0.22-2.fc38 fedora 35 k gssdp x86_64 1.6.2-2.fc38 fedora 58 k gstreamer1 x86_64 1.22.1-1.fc39 fedora 1.4 M gstreamer1-plugins-bad-free x86_64 1.22.1-1.fc39 fedora 3.0 M gstreamer1-plugins-base x86_64 1.22.1-1.fc39 fedora 2.1 M gtk-update-icon-cache x86_64 3.24.37-1.fc39 fedora 34 k gtk3 x86_64 3.24.37-1.fc39 fedora 4.8 M gts x86_64 0.7.6-44.20121130.fc38 fedora 240 k guile22 x86_64 2.2.7-8.fc39 fedora 6.5 M gupnp x86_64 1.6.3-2.fc38 fedora 105 k gupnp-igd x86_64 1.2.0-8.fc38 fedora 34 k harfbuzz x86_64 7.1.0-1.fc39 fedora 889 k harfbuzz-devel x86_64 7.1.0-1.fc39 fedora 445 k harfbuzz-icu x86_64 7.1.0-1.fc39 fedora 16 k hdf-libs x86_64 4.2.15-12.fc38 fedora 294 k hdf5 x86_64 1.12.1-11.fc38 fedora 2.2 M hdf5-devel x86_64 1.12.1-11.fc38 fedora 1.3 M hdf5-mpich x86_64 1.12.1-11.fc38 fedora 2.1 M hdf5-mpich-devel x86_64 1.12.1-11.fc38 fedora 1.3 M hicolor-icon-theme noarch 0.17-15.fc38 fedora 66 k highway x86_64 1.0.4-1.fc39 fedora 399 k hwdata noarch 0.368-1.fc39 fedora 1.6 M hwloc-libs x86_64 2.9.0-6.fc39 fedora 2.2 M hyphen x86_64 2.8.8-20.fc39 fedora 29 k imath x86_64 3.1.6-3.fc39 fedora 98 k irrXML x86_64 1.8.5-4.fc38 fedora 40 k iso-codes noarch 4.13.0-1.fc39 fedora 3.5 M jasper-libs x86_64 3.0.6-2.fc38 fedora 163 k java-17-openjdk x86_64 1:17.0.6.0.10-4.fc39 fedora 429 k java-17-openjdk-headless x86_64 1:17.0.6.0.10-4.fc39 fedora 42 M javapackages-filesystem noarch 6.1.0-8.fc39 fedora 13 k jbig2dec-libs x86_64 0.19-8.fc38 fedora 73 k jbigkit-libs x86_64 2.1-25.fc38 fedora 53 k json-c x86_64 0.16-4.fc38 fedora 41 k json-devel x86_64 3.11.2-2.fc39 fedora 164 k json-glib x86_64 1.6.6-4.fc38 fedora 162 k jsoncpp x86_64 1.9.5-4.fc38 fedora 97 k jsoncpp-devel x86_64 1.9.5-4.fc38 fedora 29 k jxrlib x86_64 1.1-24.fc38 fedora 453 k kernel-headers x86_64 6.3.0-0.rc3.git0.1.fc39 fedora 1.5 M lame-libs x86_64 3.100-14.fc38 fedora 337 k langpacks-core-font-en noarch 3.0-31.fc38 fedora 10 k lapack x86_64 3.11.0-2.fc38 fedora 9.6 M lapack-devel x86_64 3.11.0-2.fc38 fedora 85 k lapack64 x86_64 3.11.0-2.fc38 fedora 2.4 M lapack64_ x86_64 3.11.0-2.fc38 fedora 2.4 M lasi x86_64 1.1.3-10.fc38 fedora 53 k lcms2 x86_64 2.15-1.fc39 fedora 177 k libGLEW x86_64 2.2.0-4.fc38 fedora 175 k libICE x86_64 1.0.10-10.fc38 fedora 71 k libICE-devel x86_64 1.0.10-10.fc38 fedora 46 k libSM x86_64 1.2.3-12.fc38 fedora 41 k libSM-devel x86_64 1.2.3-12.fc38 fedora 12 k libX11 x86_64 1.8.4-1.fc38 fedora 649 k libX11-common noarch 1.8.4-1.fc38 fedora 177 k libX11-devel x86_64 1.8.4-1.fc38 fedora 1.0 M libX11-xcb x86_64 1.8.4-1.fc38 fedora 11 k libXScrnSaver x86_64 1.2.3-12.fc38 fedora 24 k libXScrnSaver-devel x86_64 1.2.3-12.fc38 fedora 17 k libXau x86_64 1.0.11-2.fc38 fedora 32 k libXau-devel x86_64 1.0.11-2.fc38 fedora 14 k libXcomposite x86_64 0.4.5-9.fc38 fedora 23 k libXcomposite-devel x86_64 0.4.5-9.fc38 fedora 15 k libXcursor x86_64 1.2.1-3.fc38 fedora 30 k libXcursor-devel x86_64 1.2.1-3.fc38 fedora 40 k libXdamage x86_64 1.1.5-9.fc38 fedora 22 k libXdmcp x86_64 1.1.3-10.fc38 fedora 35 k libXdmcp-devel x86_64 1.1.3-10.fc38 fedora 11 k libXext x86_64 1.3.5-2.fc38 fedora 39 k libXext-devel x86_64 1.3.5-2.fc38 fedora 85 k libXfixes x86_64 6.0.0-5.fc38 fedora 19 k libXfixes-devel x86_64 6.0.0-5.fc38 fedora 12 k libXft x86_64 2.3.6-2.fc38 fedora 71 k libXft-devel x86_64 2.3.6-2.fc38 fedora 50 k libXi x86_64 1.8-4.fc38 fedora 40 k libXi-devel x86_64 1.8-4.fc38 fedora 116 k libXinerama x86_64 1.1.5-2.fc38 fedora 14 k libXinerama-devel x86_64 1.1.5-2.fc38 fedora 13 k libXmu x86_64 1.1.4-2.fc38 fedora 77 k libXpm x86_64 3.5.15-3.fc38 fedora 63 k libXpm-devel x86_64 3.5.15-3.fc38 fedora 66 k libXrandr x86_64 1.5.2-10.fc38 fedora 27 k libXrandr-devel x86_64 1.5.2-10.fc38 fedora 19 k libXrender x86_64 0.9.11-2.fc38 fedora 27 k libXrender-devel x86_64 0.9.11-2.fc38 fedora 19 k libXres x86_64 1.2.1-4.fc38 fedora 15 k libXres-devel x86_64 1.2.1-4.fc38 fedora 12 k libXt x86_64 1.2.1-4.fc38 fedora 179 k libXt-devel x86_64 1.2.1-4.fc38 fedora 460 k libXtst x86_64 1.2.4-2.fc38 fedora 20 k libXtst-devel x86_64 1.2.4-2.fc38 fedora 16 k libXv x86_64 1.0.11-18.fc38 fedora 18 k libXv-devel x86_64 1.0.11-18.fc38 fedora 44 k libXxf86vm x86_64 1.1.5-2.fc38 fedora 18 k libaec x86_64 1.0.6-4.fc38 fedora 42 k libaec-devel x86_64 1.0.6-4.fc38 fedora 12 k libaom x86_64 3.6.0-1.fc39 fedora 1.8 M libarchive-devel x86_64 3.6.1-5.fc39 fedora 134 k libasyncns x86_64 0.8-24.fc38 fedora 30 k libavif x86_64 0.11.1-9.fc39 fedora 84 k libb2 x86_64 0.98.1-8.fc38 fedora 25 k libblkid-devel x86_64 2.38.1-4.fc38 fedora 16 k libcloudproviders x86_64 0.3.1-7.fc38 fedora 44 k libcurl-devel x86_64 8.0.1-1.fc39 fedora 987 k libdatrie x86_64 0.2.13-5.fc38 fedora 32 k libdav1d x86_64 1.1.0-1.fc39 fedora 606 k libdrm x86_64 2.4.114-2.fc38 fedora 157 k libdrm-devel x86_64 2.4.114-2.fc38 fedora 174 k libdvdnav x86_64 6.1.1-5.fc38 fedora 55 k libdvdread x86_64 6.1.3-3.fc38 fedora 72 k libedit x86_64 3.1-45.20221030cvs.fc38 fedora 107 k libepoxy x86_64 1.5.10-3.fc38 fedora 237 k libevdev x86_64 1.13.0-2.fc38 fedora 44 k libffi-devel x86_64 3.4.4-2.fc38 fedora 29 k libfontenc x86_64 1.1.6-2.fc38 fedora 32 k libgeotiff x86_64 1.7.1-7.fc39 fedora 105 k libgfortran x86_64 13.0.1-0.8.fc39 fedora 897 k libglvnd x86_64 1:1.6.0-2.fc38 fedora 134 k libglvnd-core-devel x86_64 1:1.6.0-2.fc38 fedora 18 k libglvnd-egl x86_64 1:1.6.0-2.fc38 fedora 36 k libglvnd-gles x86_64 1:1.6.0-2.fc38 fedora 32 k libglvnd-glx x86_64 1:1.6.0-2.fc38 fedora 142 k libglvnd-opengl x86_64 1:1.6.0-2.fc38 fedora 43 k libgs x86_64 10.0.0-4.fc39 fedora 3.5 M libgta x86_64 1.2.1-9.fc38 fedora 35 k libgudev x86_64 237-4.fc38 fedora 35 k libgusb x86_64 0.4.5-1.fc38 fedora 63 k libharu x86_64 2.4.3-2.fc38 fedora 580 k libharu-devel x86_64 2.4.3-2.fc38 fedora 47 k libicu x86_64 72.1-2.fc38 fedora 10 M libijs x86_64 0.35-17.fc38 fedora 29 k libimagequant x86_64 4.0.1-4.fc39 fedora 302 k libinput x86_64 1.22.1-2.fc38 fedora 209 k libjpeg-turbo x86_64 2.1.4-2.fc38 fedora 183 k libjpeg-turbo-devel x86_64 2.1.4-2.fc38 fedora 98 k libjxl x86_64 1:0.7.0-6.fc38 fedora 1.0 M libkml x86_64 1.3.0-43.fc38 fedora 355 k liblerc x86_64 4.0.0-3.fc38 fedora 202 k libmng x86_64 2.0.3-18.fc39 fedora 187 k libmount-devel x86_64 2.38.1-4.fc38 fedora 18 k libmpc x86_64 1.3.1-2.fc38 fedora 70 k libnice x86_64 0.1.21-3.fc38 fedora 199 k libogg x86_64 2:1.3.5-5.fc38 fedora 33 k libogg-devel x86_64 2:1.3.5-5.fc38 fedora 13 k libpaper x86_64 1:2.0.10-1.fc39 fedora 26 k libpciaccess x86_64 0.16-8.fc38 fedora 26 k libpciaccess-devel x86_64 0.16-8.fc38 fedora 12 k libpng x86_64 2:1.6.37-14.fc38 fedora 120 k libpng-devel x86_64 2:1.6.37-14.fc38 fedora 291 k libpq x86_64 15.0-3.fc38 fedora 213 k libpq-devel x86_64 15.0-3.fc38 fedora 106 k libproxy x86_64 0.4.18-5.fc38 fedora 71 k libqhull_r x86_64 1:7.2.1-12.fc38 fedora 167 k libquadmath x86_64 13.0.1-0.8.fc39 fedora 187 k libquadmath-devel x86_64 13.0.1-0.8.fc39 fedora 28 k libraqm x86_64 0.8.0-4.fc38 fedora 20 k librsvg2 x86_64 2.55.90-1.fc39 fedora 3.1 M librttopo x86_64 1.1.0-11.fc38 fedora 208 k libselinux-devel x86_64 3.5-1.fc39 fedora 151 k libsepol-devel x86_64 3.5-1.fc39 fedora 49 k libsndfile x86_64 1.1.0-6.fc38 fedora 214 k libsoup3 x86_64 3.4.0-2.fc39 fedora 387 k libspatialite x86_64 5.0.1-21.fc39 fedora 3.1 M libspnav x86_64 1.0-3.fc38 fedora 24 k libsrtp x86_64 2.3.0-10.fc38 fedora 57 k libstdc++-devel x86_64 13.0.1-0.8.fc39 fedora 2.6 M libstemmer x86_64 2.2.0-5.fc38 fedora 168 k libthai x86_64 0.1.29-4.fc38 fedora 213 k libtheora x86_64 1:1.1.1-33.fc38 fedora 166 k libtheora-devel x86_64 1:1.1.1-33.fc38 fedora 31 k libtiff x86_64 4.4.0-5.fc38 fedora 197 k libtiff-devel x86_64 4.4.0-5.fc38 fedora 546 k libtool-ltdl x86_64 2.4.7-6.fc38 fedora 37 k libtracker-sparql x86_64 3.5.0-1.fc39 fedora 375 k libunistring x86_64 1.1-3.fc38 fedora 545 k libunwind x86_64 1.7.0-0.1.rc2.fc39 fedora 70 k libusb1 x86_64 1.0.26-2.fc38 fedora 74 k libuv x86_64 1:1.44.2-3.fc38 fedora 152 k libva x86_64 2.17.0-2.fc38 fedora 104 k libvisual x86_64 1:0.4.0-38.fc38 fedora 143 k libvmaf x86_64 2.3.0-5.fc38 fedora 180 k libvorbis x86_64 1:1.3.7-7.fc38 fedora 195 k libvpx x86_64 1.13.0-2.fc39 fedora 1.1 M libwacom x86_64 2.6.0-1.fc38 fedora 42 k libwacom-data noarch 2.6.0-1.fc38 fedora 184 k libwayland-client x86_64 1.21.0-2.fc38 fedora 34 k libwayland-cursor x86_64 1.21.0-2.fc38 fedora 19 k libwayland-egl x86_64 1.21.0-2.fc38 fedora 13 k libwayland-server x86_64 1.21.0-2.fc38 fedora 42 k libwebp x86_64 1.3.0-2.fc38 fedora 282 k libxcb x86_64 1.13.1-11.fc38 fedora 231 k libxcb-devel x86_64 1.13.1-11.fc38 fedora 1.4 M libxcrypt-devel x86_64 4.4.33-7.fc39 fedora 30 k libxkbcommon x86_64 1.5.0-2.fc38 fedora 140 k libxkbcommon-x11 x86_64 1.5.0-2.fc38 fedora 22 k libxkbfile x86_64 1.1.1-2.fc38 fedora 90 k libxkbfile-devel x86_64 1.1.1-2.fc38 fedora 15 k libxml2-devel x86_64 2.10.3-3.fc38 fedora 531 k libxshmfence x86_64 1.3-12.fc38 fedora 12 k libxslt x86_64 1.1.37-3.fc39 fedora 184 k lilv-libs x86_64 0.24.14-4.fc38 fedora 58 k lksctp-tools x86_64 1.0.19-3.fc38 fedora 92 k llvm-libs x86_64 15.0.7-2.fc38 fedora 25 M lua x86_64 5.4.4-9.fc39 fedora 190 k lua-filesystem x86_64 1.8.0-8.fc38 fedora 34 k lua-json noarch 1.3.4-3.fc38 fedora 30 k lua-lpeg x86_64 1.0.2-10.fc38 fedora 67 k lua-posix x86_64 36.1-1.fc39 fedora 140 k lua-term x86_64 0.07-17.fc38 fedora 15 k lz4-devel x86_64 1.9.4-2.fc38 fedora 31 k m4 x86_64 1.4.19-4.fc37 fedora 303 k make x86_64 1:4.4-3.fc38 fedora 580 k mariadb-connector-c x86_64 3.2.7-3.fc38 fedora 196 k mariadb-connector-c-config noarch 3.2.7-3.fc38 fedora 8.7 k mariadb-connector-c-devel x86_64 3.2.7-3.fc38 fedora 53 k med x86_64 4.1.0-11.fc38 fedora 543 k mesa-filesystem x86_64 23.0.0-1.fc39 fedora 18 k mesa-libEGL x86_64 23.0.0-1.fc39 fedora 131 k mesa-libEGL-devel x86_64 23.0.0-1.fc39 fedora 21 k mesa-libGL x86_64 23.0.0-1.fc39 fedora 174 k mesa-libGLU x86_64 9.0.1-8.fc38 fedora 155 k mesa-libgbm x86_64 23.0.0-1.fc39 fedora 45 k mesa-libglapi x86_64 23.0.0-1.fc39 fedora 54 k minizip-ng x86_64 3.0.7-3.fc38 fedora 70 k mkfontscale x86_64 1.2.2-3.fc38 fedora 32 k mpdecimal x86_64 2.5.1-6.fc38 fedora 89 k mpg123-libs x86_64 1.31.3-1.fc39 fedora 340 k mpich x86_64 4.0.3-1.fc39 fedora 1.7 M mpich-devel x86_64 4.0.3-1.fc39 fedora 1.4 M mtdev x86_64 1.1.6-5.fc38 fedora 21 k ncurses x86_64 6.4-3.20230114.fc38 fedora 412 k netcdf x86_64 4.9.2-1.fc39 copr_base 831 k netcdf-cxx x86_64 4.2-31.fc38 fedora 44 k netcdf-cxx-devel x86_64 4.2-31.fc38 fedora 374 k netcdf-devel x86_64 4.9.2-1.fc39 copr_base 91 k netcdf-mpich x86_64 4.9.2-1.fc39 copr_base 822 k netcdf-mpich-devel x86_64 4.9.2-1.fc39 copr_base 52 k netpbm x86_64 11.01.00-2.fc38 fedora 184 k nettle x86_64 3.8-3.fc38 fedora 412 k nspr x86_64 4.35.0-5.fc39 fedora 136 k nss x86_64 3.88.1-2.fc39 fedora 691 k nss-softokn x86_64 3.88.1-2.fc39 fedora 1.0 M nss-softokn-freebl x86_64 3.88.1-2.fc39 fedora 325 k nss-sysinit x86_64 3.88.1-2.fc39 fedora 18 k nss-util x86_64 3.88.1-2.fc39 fedora 86 k ogdi x86_64 4.1.0-10.fc38 fedora 244 k openal-soft x86_64 1.23.0-1.fc38 fedora 572 k openblas x86_64 0.3.21-4.fc38 fedora 35 k openblas-openmp x86_64 0.3.21-4.fc38 fedora 5.1 M openblas-openmp64 x86_64 0.3.21-4.fc38 fedora 4.9 M opencascade-draw x86_64 7.6.3-3.fc38 fedora 2.4 M opencascade-foundation x86_64 7.6.3-3.fc38 fedora 13 M opencascade-modeling x86_64 7.6.3-3.fc38 fedora 14 M opencascade-ocaf x86_64 7.6.3-3.fc38 fedora 1.2 M opencascade-visualization x86_64 7.6.3-3.fc38 fedora 2.1 M openexr-libs x86_64 3.1.6-1.fc39 fedora 1.1 M openjpeg2 x86_64 2.5.0-3.fc38 fedora 178 k openslide x86_64 3.4.1-23.fc38 fedora 106 k openslide-devel x86_64 3.4.1-23.fc38 fedora 13 k openssl-devel x86_64 1:3.0.8-1.fc39 fedora 2.6 M opus x86_64 1.3.1-12.fc39 fedora 206 k orc x86_64 0.4.33-2.fc38 fedora 202 k pango x86_64 1.50.14-1.fc39 fedora 342 k pciutils-libs x86_64 3.9.0-3.fc38 fedora 44 k pcre x86_64 8.45-1.fc38.3 fedora 201 k pcre2-devel x86_64 10.42-1.fc38.1 fedora 506 k pcre2-utf16 x86_64 10.42-1.fc38.1 fedora 214 k pcre2-utf32 x86_64 10.42-1.fc38.1 fedora 201 k perl-B x86_64 1.83-495.fc38 fedora 184 k perl-Carp noarch 1.52-490.fc38 fedora 29 k perl-Class-Struct noarch 0.66-495.fc38 fedora 24 k perl-Data-Dumper x86_64 2.184-491.fc38 fedora 56 k perl-DynaLoader x86_64 1.52-495.fc38 fedora 28 k perl-Encode x86_64 4:3.19-493.fc38 fedora 1.7 M perl-English noarch 1.11-495.fc38 fedora 16 k perl-Errno x86_64 1.36-495.fc38 fedora 17 k perl-Exporter noarch 5.77-490.fc38 fedora 31 k perl-Fcntl x86_64 1.15-495.fc38 fedora 23 k perl-File-Basename noarch 2.85-495.fc38 fedora 19 k perl-File-Compare noarch 1.100.700-495.fc38 fedora 15 k perl-File-Copy noarch 2.39-495.fc38 fedora 22 k perl-File-Find noarch 1.40-495.fc38 fedora 27 k perl-File-Path noarch 2.18-490.fc38 fedora 35 k perl-File-Temp noarch 1:0.231.100-490.fc38 fedora 59 k perl-File-stat noarch 1.12-495.fc38 fedora 19 k perl-Getopt-Long noarch 1:2.54-2.fc38 fedora 60 k perl-Getopt-Std noarch 1.13-495.fc38 fedora 18 k perl-HTTP-Tiny noarch 0.082-2.fc38 fedora 55 k perl-IO x86_64 1.50-495.fc38 fedora 94 k perl-IPC-Open3 noarch 1.22-495.fc38 fedora 25 k perl-MIME-Base64 x86_64 3.16-490.fc38 fedora 30 k perl-POSIX x86_64 2.03-495.fc38 fedora 100 k perl-PathTools x86_64 3.84-490.fc38 fedora 87 k perl-Pod-Escapes noarch 1:1.07-490.fc38 fedora 20 k perl-Pod-Perldoc noarch 3.28.01-491.fc38 fedora 86 k perl-Pod-Simple noarch 1:3.43-491.fc38 fedora 219 k perl-Pod-Usage noarch 4:2.03-4.fc38 fedora 40 k perl-Scalar-List-Utils x86_64 5:1.63-490.fc38 fedora 72 k perl-SelectSaver noarch 1.02-495.fc38 fedora 14 k perl-Socket x86_64 4:2.036-2.fc38 fedora 55 k perl-Storable x86_64 1:3.26-490.fc38 fedora 97 k perl-Symbol noarch 1.09-495.fc38 fedora 16 k perl-Term-ANSIColor noarch 5.01-491.fc38 fedora 47 k perl-Term-Cap noarch 1.18-1.fc39 fedora 22 k perl-Text-ParseWords noarch 3.31-490.fc38 fedora 16 k perl-Text-Tabs+Wrap noarch 2021.0814-490.fc38 fedora 22 k perl-Thread-Queue noarch 3.14-490.fc38 fedora 21 k perl-Time-Local noarch 2:1.300-490.fc38 fedora 33 k perl-constant noarch 1.33-491.fc38 fedora 23 k perl-if noarch 0.61.000-495.fc38 fedora 16 k perl-interpreter x86_64 4:5.36.0-495.fc38 fedora 74 k perl-libs x86_64 4:5.36.0-495.fc38 fedora 2.2 M perl-mro x86_64 1.26-495.fc38 fedora 31 k perl-overload noarch 1.35-495.fc38 fedora 48 k perl-overloading noarch 0.02-495.fc38 fedora 15 k perl-parent noarch 1:0.241-1.fc39 fedora 14 k perl-podlators noarch 1:5.01-2.fc38 fedora 125 k perl-threads x86_64 1:2.27-490.fc38 fedora 57 k perl-threads-shared x86_64 1.64-490.fc38 fedora 44 k perl-vars noarch 1.05-495.fc38 fedora 15 k pixman x86_64 0.42.2-1.fc39 fedora 284 k poly2tri x86_64 0.0-26.20130501hg26242d0aa7b8.fc38 fedora 31 k poppler x86_64 23.02.0-1.fc38 fedora 1.2 M poppler-data noarch 0.4.11-4.fc38 fedora 2.0 M poppler-glib x86_64 23.02.0-1.fc38 fedora 177 k procps-ng x86_64 3.3.17-9.fc38 fedora 339 k proj x86_64 9.2.0-1.fc39 fedora 1.5 M proj-data noarch 9.2.0-1.fc39 fedora 1.3 M proj-devel x86_64 9.2.0-1.fc39 fedora 87 k pugixml x86_64 1.13-2.fc38 fedora 100 k pugixml-devel x86_64 1.13-2.fc38 fedora 23 k pulseaudio-libs x86_64 16.1-4.fc38 fedora 694 k pyproject-rpm-macros noarch 1.6.3-1.fc39 fedora 41 k python-pip-wheel noarch 23.0.1-1.fc39 fedora 1.4 M python-rpm-macros noarch 3.11-10.fc39 fedora 20 k python-setuptools-wheel noarch 65.5.1-2.fc38 fedora 715 k python3 x86_64 3.11.2-1.fc39 fedora 28 k python3-appdirs noarch 1.4.4-8.fc38 fedora 23 k python3-brotli x86_64 1.0.9-11.fc38 fedora 320 k python3-cairo x86_64 1.23.0-2.fc38 fedora 125 k python3-contourpy x86_64 1.0.7-2.fc38 fedora 237 k python3-cycler noarch 0.11.0-7.fc38 fedora 21 k python3-dateutil noarch 1:2.8.2-6.fc39 fedora 360 k python3-fonttools x86_64 4.39.2-1.fc39 fedora 2.8 M python3-fs noarch 2.4.16-1.fc39 fedora 312 k python3-kiwisolver x86_64 1.4.4-7.fc38 fedora 66 k python3-libs x86_64 3.11.2-1.fc39 fedora 9.6 M python3-lxml x86_64 4.9.2-2.fc38 fedora 1.3 M python3-matplotlib-data noarch 3.7.1-1.fc39 fedora 543 k python3-matplotlib-data-fonts noarch 3.7.1-1.fc39 fedora 2.3 M python3-matplotlib-tk x86_64 3.7.1-1.fc39 fedora 53 k python3-munkres noarch 1.1.2-14.fc38 fedora 26 k python3-numpy x86_64 1:1.24.1-3.fc39 fedora 7.8 M python3-numpy-f2py x86_64 1:1.24.1-3.fc39 fedora 498 k python3-olefile noarch 0.46-19.fc38 fedora 67 k python3-packaging noarch 23.0-1.fc38 fedora 106 k python3-pillow x86_64 9.4.0-3.fc39 fedora 921 k python3-pillow-tk x86_64 9.4.0-3.fc39 fedora 30 k python3-pyparsing noarch 3.0.9-3.fc38 fedora 262 k python3-pyside2 x86_64 1:5.15.7-2.fc38 fedora 9.1 M python3-rpm-generators noarch 14-3.fc39 fedora 30 k python3-rpm-macros noarch 3.11-10.fc39 fedora 15 k python3-scipy x86_64 1.10.1-2.fc39 fedora 21 M python3-setuptools noarch 65.5.1-2.fc38 fedora 1.7 M python3-shiboken2 x86_64 1:5.15.7-2.fc38 fedora 261 k python3-six noarch 1.16.0-9.fc38 fedora 42 k python3-tkinter x86_64 3.11.2-1.fc39 fedora 417 k python3-vtk x86_64 9.2.6-2.fc39 fedora 10 M qt-settings noarch 38.2-2.fc39 fedora 10 k qt5-designer x86_64 5.15.8-2.fc38 fedora 160 k qt5-doctools x86_64 5.15.8-2.fc38 fedora 697 k qt5-linguist x86_64 5.15.8-2.fc38 fedora 884 k qt5-qt3d x86_64 5.15.8-2.fc38 fedora 2.3 M qt5-qtbase x86_64 5.15.8-7.fc39 fedora 3.5 M qt5-qtbase-common noarch 5.15.8-7.fc39 fedora 11 k qt5-qtbase-gui x86_64 5.15.8-7.fc39 fedora 6.4 M qt5-qtcharts x86_64 5.15.8-2.fc38 fedora 686 k qt5-qtdatavis3d x86_64 5.15.8-2.fc38 fedora 556 k qt5-qtdeclarative x86_64 5.15.8-4.fc39 fedora 4.3 M qt5-qtdeclarative-devel x86_64 5.15.8-4.fc39 fedora 1.5 M qt5-qtgraphicaleffects x86_64 5.15.8-2.fc38 fedora 120 k qt5-qtimageformats x86_64 5.15.8-2.fc38 fedora 104 k qt5-qtlocation x86_64 5.15.8-4.fc39 fedora 3.1 M qt5-qtlocation-devel x86_64 5.15.8-4.fc39 fedora 199 k qt5-qtmultimedia x86_64 5.15.8-2.fc38 fedora 813 k qt5-qtquickcontrols2 x86_64 5.15.8-2.fc38 fedora 1.7 M qt5-qtremoteobjects x86_64 5.15.8-1.fc38 fedora 374 k qt5-qtscript x86_64 5.15.8-2.fc38 fedora 1.0 M qt5-qtscxml x86_64 5.15.8-2.fc38 fedora 287 k qt5-qtsensors x86_64 5.15.8-2.fc38 fedora 229 k qt5-qtserialport x86_64 5.15.8-2.fc38 fedora 65 k qt5-qtspeech x86_64 5.15.8-2.fc38 fedora 44 k qt5-qtsvg x86_64 5.15.8-2.fc38 fedora 186 k qt5-qttools x86_64 5.15.8-2.fc38 fedora 41 k qt5-qttools-common noarch 5.15.8-2.fc38 fedora 11 k qt5-qttools-devel x86_64 5.15.8-2.fc38 fedora 227 k qt5-qttools-libs-designer x86_64 5.15.8-2.fc38 fedora 2.7 M qt5-qttools-libs-designercomponents x86_64 5.15.8-2.fc38 fedora 790 k qt5-qttools-libs-help x86_64 5.15.8-2.fc38 fedora 158 k qt5-qtwebchannel x86_64 5.15.8-2.fc38 fedora 100 k qt5-qtwebchannel-devel x86_64 5.15.8-2.fc38 fedora 27 k qt5-qtwebengine x86_64 5.15.12-4.fc39 fedora 53 M qt5-qtwebengine-devtools x86_64 5.15.12-4.fc39 fedora 1.9 M qt5-qtwebkit x86_64 5.212.0-0.74alpha4.fc39 fedora 13 M qt5-qtwebkit-devel x86_64 5.212.0-0.74alpha4.fc39 fedora 71 k qt5-qtwebsockets x86_64 5.15.8-2.fc38 fedora 86 k qt5-qtx11extras x86_64 5.15.8-2.fc38 fedora 35 k qt5-qtx11extras-devel x86_64 5.15.8-2.fc38 fedora 15 k qt5-qtxmlpatterns x86_64 5.15.8-2.fc38 fedora 1.0 M qt5-rpm-macros noarch 5.15.8-2.fc38 fedora 9.8 k rav1e-libs x86_64 0.5.1-9.fc39 fedora 890 k re2 x86_64 1:20220601-2.fc38 fedora 197 k rhash x86_64 1.4.3-2.fc38 fedora 194 k rpm-mpi-hooks noarch 8-5.fc38 fedora 11 k serd x86_64 0.30.16-1.fc38 fedora 62 k shared-mime-info x86_64 2.2-3.fc38 fedora 381 k shiboken2 x86_64 1:5.15.7-2.fc38 fedora 629 k snappy x86_64 1.1.10-1.fc39 fedora 37 k sord x86_64 0.16.14-1.fc38 fedora 39 k soundtouch x86_64 2.3.1-4.fc38 fedora 94 k sqlite x86_64 3.40.1-2.fc38 fedora 813 k sqlite-devel x86_64 3.40.1-2.fc38 fedora 144 k sratom x86_64 0.6.10-3.fc38 fedora 26 k svt-av1-libs x86_64 1.4.1-2.fc38 fedora 2.0 M sysprof-capture-devel x86_64 3.48.0-1.fc39 fedora 58 k tbb x86_64 2020.3-16.fc39 fedora 170 k tcl x86_64 1:8.6.12-4.fc38 fedora 1.1 M tcl-devel x86_64 1:8.6.12-4.fc38 fedora 169 k tk x86_64 1:8.6.12-4.fc38 fedora 1.6 M tk-devel x86_64 1:8.6.12-4.fc38 fedora 538 k ttmkfdir x86_64 3.0.9-67.fc38 fedora 54 k tzdata-java noarch 2022g-2.fc38 fedora 208 k unixODBC x86_64 2.3.11-2.fc38 fedora 483 k uriparser x86_64 0.9.7-2.fc38 fedora 60 k urw-base35-bookman-fonts noarch 20200910-16.fc38 fedora 848 k urw-base35-c059-fonts noarch 20200910-16.fc38 fedora 875 k urw-base35-d050000l-fonts noarch 20200910-16.fc38 fedora 76 k urw-base35-fonts noarch 20200910-16.fc38 fedora 11 k urw-base35-fonts-common noarch 20200910-16.fc38 fedora 21 k urw-base35-gothic-fonts noarch 20200910-16.fc38 fedora 643 k urw-base35-nimbus-mono-ps-fonts noarch 20200910-16.fc38 fedora 796 k urw-base35-nimbus-roman-fonts noarch 20200910-16.fc38 fedora 857 k urw-base35-nimbus-sans-fonts noarch 20200910-16.fc38 fedora 1.3 M urw-base35-p052-fonts noarch 20200910-16.fc38 fedora 974 k urw-base35-standard-symbols-ps-fonts noarch 20200910-16.fc38 fedora 42 k urw-base35-z003-fonts noarch 20200910-16.fc38 fedora 276 k utf8cpp-devel noarch 3.2.3-2.fc38 fedora 28 k vim-filesystem noarch 2:9.0.1407-1.fc39 fedora 18 k vtk x86_64 9.2.6-2.fc39 fedora 24 M vtk-java x86_64 9.2.6-2.fc39 fedora 6.4 M vtk-qt x86_64 9.2.6-2.fc39 fedora 289 k vulkan-headers noarch 1.3.239.0-2.fc38 fedora 1.0 M vulkan-loader x86_64 1.3.239.0-1.fc38 fedora 141 k vulkan-loader-devel x86_64 1.3.239.0-1.fc38 fedora 9.1 k webrtc-audio-processing x86_64 0.3.1-10.fc38 fedora 307 k woff2 x86_64 1.0.2-17.fc38 fedora 61 k xapian-core-libs x86_64 1.4.20-3.fc39 fedora 757 k xcb-util x86_64 0.4.1-2.fc38 fedora 19 k xcb-util-image x86_64 0.4.1-2.fc38 fedora 19 k xcb-util-keysyms x86_64 0.4.1-2.fc38 fedora 14 k xcb-util-renderutil x86_64 0.3.10-2.fc38 fedora 17 k xcb-util-wm x86_64 0.4.2-2.fc38 fedora 31 k xkeyboard-config noarch 2.38-1.fc38 fedora 963 k xml-common noarch 0.6.3-60.fc38 fedora 31 k xorg-x11-fonts-ISO8859-1-100dpi noarch 7.5-35.fc38 fedora 1.1 M xorg-x11-fonts-Type1 noarch 7.5-35.fc38 fedora 505 k xorg-x11-proto-devel noarch 2022.2-3.fc38 fedora 299 k xprop x86_64 1.2.5-3.fc38 fedora 35 k xz-devel x86_64 5.4.1-1.fc38 fedora 65 k zipios++ x86_64 0.1.5.9-30.fc38 fedora 76 k zlib-devel x86_64 1.2.13-3.fc38 fedora 45 k Transaction Summary =================================================================================================== Install 647 Packages Total download size: 752 M Installed size: 3.8 G Downloading Packages: (1/647): netcdf-devel-4.9.2-1.fc39.x86_64.rpm 754 kB/s | 91 kB 00:00 (2/647): netcdf-mpich-4.9.2-1.fc39.x86_64.rpm 5.0 MB/s | 822 kB 00:00 (3/647): netcdf-4.9.2-1.fc39.x86_64.rpm 5.0 MB/s | 831 kB 00:00 (4/647): netcdf-mpich-devel-4.9.2-1.fc39.x86_64 1.2 MB/s | 52 kB 00:00 (5/647): LibRaw-0.21.1-3.fc39.x86_64.rpm 1.7 MB/s | 417 kB 00:00 (6/647): Lmod-8.7.20-1.fc39.x86_64.rpm 3.9 MB/s | 259 kB 00:00 (7/647): PEGTL-devel-2.8.3-6.fc38.x86_64.rpm 4.1 MB/s | 159 kB 00:00 (8/647): Coin4-devel-4.0.0-12.fc38.x86_64.rpm 8.2 MB/s | 3.2 MB 00:00 (9/647): SoQt-1.6.0-12.fc38.x86_64.rpm 3.3 MB/s | 226 kB 00:00 (10/647): Coin4-4.0.0-12.fc38.x86_64.rpm 5.8 MB/s | 2.5 MB 00:00 (11/647): SuperLU-5.3.0-5.fc39.x86_64.rpm 4.4 MB/s | 183 kB 00:00 (12/647): adobe-mappings-cmap-deprecated-202301 2.2 MB/s | 113 kB 00:00 (13/647): adwaita-cursor-theme-44.0-1.fc39.noar 11 MB/s | 633 kB 00:00 (14/647): adwaita-icon-theme-44.0-1.fc39.noarch 19 MB/s | 1.1 MB 00:00 (15/647): adobe-mappings-pdf-20190401-3.fc38.no 3.6 MB/s | 698 kB 00:00 (16/647): alsa-lib-1.2.8-3.fc38.x86_64.rpm 9.9 MB/s | 516 kB 00:00 (17/647): annobin-docs-11.14-1.fc39.noarch.rpm 4.1 MB/s | 93 kB 00:00 (18/647): annobin-plugin-gcc-11.14-1.fc39.x86_6 20 MB/s | 892 kB 00:00 (19/647): armadillo-10.8.2-3.fc38.x86_64.rpm 799 kB/s | 34 kB 00:00 (20/647): arpack-3.8.0-6.fc38.x86_64.rpm 4.8 MB/s | 206 kB 00:00 (21/647): at-spi2-atk-2.48.0-1.fc39.x86_64.rpm 1.3 MB/s | 86 kB 00:00 (22/647): adobe-mappings-cmap-20230118-1.fc38.n 5.1 MB/s | 2.1 MB 00:00 (23/647): atk-2.48.0-1.fc39.x86_64.rpm 2.0 MB/s | 81 kB 00:00 (24/647): assimp-5.0.1-10.fc38.x86_64.rpm 9.9 MB/s | 3.0 MB 00:00 (25/647): at-spi2-core-2.48.0-1.fc39.x86_64.rpm 1.8 MB/s | 371 kB 00:00 (26/647): automake-1.16.5-12.fc39.noarch.rpm 22 MB/s | 696 kB 00:00 (27/647): avahi-libs-0.8-20.fc38.x86_64.rpm 1.9 MB/s | 67 kB 00:00 (28/647): blas-3.11.0-2.fc38.x86_64.rpm 9.4 MB/s | 401 kB 00:00 (29/647): blas-devel-3.11.0-2.fc38.x86_64.rpm 664 kB/s | 25 kB 00:00 (30/647): blas64-3.11.0-2.fc38.x86_64.rpm 5.6 MB/s | 230 kB 00:00 (31/647): blas64_-3.11.0-2.fc38.x86_64.rpm 5.1 MB/s | 231 kB 00:00 (32/647): autoconf-2.71-5.fc38.noarch.rpm 2.7 MB/s | 733 kB 00:00 (33/647): blosc-1.21.2-2.fc38.x86_64.rpm 1.6 MB/s | 54 kB 00:00 (34/647): boost-1.81.0-1.fc39.x86_64.rpm 363 kB/s | 14 kB 00:00 (35/647): boost-chrono-1.81.0-1.fc39.x86_64.rpm 893 kB/s | 26 kB 00:00 (36/647): boost-atomic-1.81.0-1.fc39.x86_64.rpm 575 kB/s | 20 kB 00:00 (37/647): boost-container-1.81.0-1.fc39.x86_64. 1.0 MB/s | 40 kB 00:00 (38/647): boost-contract-1.81.0-1.fc39.x86_64.r 1.4 MB/s | 46 kB 00:00 (39/647): boost-context-1.81.0-1.fc39.x86_64.rp 426 kB/s | 17 kB 00:00 (40/647): boost-coroutine-1.81.0-1.fc39.x86_64. 550 kB/s | 20 kB 00:00 (41/647): boost-date-time-1.81.0-1.fc39.x86_64. 488 kB/s | 16 kB 00:00 (42/647): boost-fiber-1.81.0-1.fc39.x86_64.rpm 1.2 MB/s | 42 kB 00:00 (43/647): boost-filesystem-1.81.0-1.fc39.x86_64 1.1 MB/s | 66 kB 00:00 (44/647): boost-graph-1.81.0-1.fc39.x86_64.rpm 2.9 MB/s | 151 kB 00:00 (45/647): boost-iostreams-1.81.0-1.fc39.x86_64. 980 kB/s | 42 kB 00:00 (46/647): boost-json-1.81.0-1.fc39.x86_64.rpm 2.9 MB/s | 110 kB 00:00 (47/647): boost-log-1.81.0-1.fc39.x86_64.rpm 9.2 MB/s | 491 kB 00:00 (48/647): boost-locale-1.81.0-1.fc39.x86_64.rpm 3.4 MB/s | 222 kB 00:00 (49/647): boost-math-1.81.0-1.fc39.x86_64.rpm 4.6 MB/s | 221 kB 00:00 (50/647): boost-nowide-1.81.0-1.fc39.x86_64.rpm 358 kB/s | 21 kB 00:00 (51/647): boost-program-options-1.81.0-1.fc39.x 2.9 MB/s | 109 kB 00:00 (52/647): boost-numpy3-1.81.0-1.fc39.x86_64.rpm 575 kB/s | 30 kB 00:00 (53/647): boost-python3-1.81.0-1.fc39.x86_64.rp 2.3 MB/s | 97 kB 00:00 (54/647): boost-random-1.81.0-1.fc39.x86_64.rpm 598 kB/s | 24 kB 00:00 (55/647): boost-serialization-1.81.0-1.fc39.x86 5.4 MB/s | 136 kB 00:00 (56/647): boost-regex-1.81.0-1.fc39.x86_64.rpm 3.0 MB/s | 111 kB 00:00 (57/647): boost-stacktrace-1.81.0-1.fc39.x86_64 753 kB/s | 31 kB 00:00 (58/647): boost-system-1.81.0-1.fc39.x86_64.rpm 522 kB/s | 16 kB 00:00 (59/647): boost-thread-1.81.0-1.fc39.x86_64.rpm 1.6 MB/s | 58 kB 00:00 (60/647): boost-test-1.81.0-1.fc39.x86_64.rpm 5.7 MB/s | 239 kB 00:00 (61/647): boost-timer-1.81.0-1.fc39.x86_64.rpm 475 kB/s | 24 kB 00:00 (62/647): boost-type_erasure-1.81.0-1.fc39.x86_ 665 kB/s | 33 kB 00:00 (63/647): boost-wave-1.81.0-1.fc39.x86_64.rpm 2.5 MB/s | 225 kB 00:00 (64/647): brotli-1.0.9-11.fc38.x86_64.rpm 1.3 MB/s | 316 kB 00:00 (65/647): brotli-devel-1.0.9-11.fc38.x86_64.rpm 193 kB/s | 31 kB 00:00 (66/647): bzip2-devel-1.0.8-13.fc38.x86_64.rpm 2.6 MB/s | 214 kB 00:00 (67/647): cairo-1.17.8-3.fc39.x86_64.rpm 7.8 MB/s | 703 kB 00:00 (68/647): cairo-gobject-1.17.8-3.fc39.x86_64.rp 422 kB/s | 18 kB 00:00 (69/647): cdparanoia-libs-10.2-41.fc38.x86_64.r 1.1 MB/s | 54 kB 00:00 (70/647): cfitsio-4.2.0-3.fc38.x86_64.rpm 11 MB/s | 607 kB 00:00 (71/647): cgnslib-4.3.0-7.fc38.x86_64.rpm 9.8 MB/s | 434 kB 00:00 (72/647): cgnslib-common-4.3.0-7.fc38.noarch.rp 3.0 MB/s | 115 kB 00:00 (73/647): cgnslib-devel-4.3.0-7.fc38.x86_64.rpm 1.2 MB/s | 56 kB 00:00 (74/647): cgnslib-libs-4.3.0-7.fc38.x86_64.rpm 8.7 MB/s | 296 kB 00:00 (75/647): clang-resource-filesystem-15.0.7-2.fc 299 kB/s | 13 kB 00:00 (76/647): cli11-devel-2.3.2-3.fc39.noarch.rpm 2.9 MB/s | 132 kB 00:00 (77/647): cmake-3.26.0-1.fc39.x86_64.rpm 27 MB/s | 6.9 MB 00:00 (78/647): cmake-data-3.26.0-1.fc39.noarch.rpm 20 MB/s | 2.2 MB 00:00 (79/647): clang-libs-15.0.7-2.fc38.x86_64.rpm 41 MB/s | 21 MB 00:00 (80/647): cmake-filesystem-3.26.0-1.fc39.x86_64 447 kB/s | 17 kB 00:00 (81/647): cmake-rpm-macros-3.26.0-1.fc39.noarch 427 kB/s | 16 kB 00:00 (82/647): colord-libs-1.4.6-2.fc37.x86_64.rpm 4.8 MB/s | 233 kB 00:00 (83/647): copy-jdk-configs-4.1-2.fc38.noarch.rp 474 kB/s | 28 kB 00:00 (84/647): crypto-policies-scripts-20230301-1.gi 2.3 MB/s | 116 kB 00:00 (85/647): cups-libs-2.4.2-10.fc39.x86_64.rpm 10 MB/s | 267 kB 00:00 (86/647): dbus-1.14.6-1.fc38.x86_64.rpm 214 kB/s | 7.9 kB 00:00 (87/647): dbus-broker-33-1.fc38.x86_64.rpm 4.2 MB/s | 173 kB 00:00 (88/647): dbus-common-1.14.6-1.fc38.noarch.rpm 198 kB/s | 15 kB 00:00 (89/647): dbus-libs-1.14.6-1.fc38.x86_64.rpm 3.7 MB/s | 156 kB 00:00 (90/647): cpp-13.0.1-0.8.fc39.x86_64.rpm 31 MB/s | 11 MB 00:00 (91/647): dejavu-sans-fonts-2.37-20.fc38.noarch 21 MB/s | 1.3 MB 00:00 (92/647): desktop-file-utils-0.26-8.fc38.x86_64 2.2 MB/s | 71 kB 00:00 (93/647): double-conversion-3.1.5-8.fc38.x86_64 1.4 MB/s | 49 kB 00:00 (94/647): dos2unix-7.4.4-2.fc39.x86_64.rpm 5.9 MB/s | 289 kB 00:00 (95/647): double-conversion-devel-3.1.5-8.fc38. 652 kB/s | 27 kB 00:00 (96/647): eigen3-devel-3.4.0-9.fc38.noarch.rpm 14 MB/s | 1.2 MB 00:00 (97/647): emacs-filesystem-28.2-4.fc38.noarch.r 337 kB/s | 7.6 kB 00:00 (98/647): doxygen-1.9.6-7.fc39.x86_64.rpm 29 MB/s | 4.8 MB 00:00 (99/647): expat-2.5.0-2.fc38.x86_64.rpm 2.8 MB/s | 110 kB 00:00 (100/647): expat-devel-2.5.0-2.fc38.x86_64.rpm 1.3 MB/s | 52 kB 00:00 (101/647): fdk-aac-free-2.0.0-10.fc38.x86_64.rp 8.1 MB/s | 336 kB 00:00 (102/647): flexiblas-3.3.0-2.fc38.x86_64.rpm 1.0 MB/s | 32 kB 00:00 (103/647): flac-libs-1.4.2-2.fc38.x86_64.rpm 4.5 MB/s | 258 kB 00:00 (104/647): flexiblas-devel-3.3.0-2.fc38.x86_64. 2.5 MB/s | 116 kB 00:00 (105/647): flexiblas-netlib-3.3.0-2.fc38.x86_64 28 MB/s | 3.2 MB 00:00 (106/647): flexiblas-openblas-openmp-3.3.0-2.fc 500 kB/s | 17 kB 00:00 (107/647): flexiblas-netlib64-3.3.0-2.fc38.x86_ 21 MB/s | 3.1 MB 00:00 (108/647): flexiblas-openblas-openmp64-3.3.0-2. 469 kB/s | 17 kB 00:00 (109/647): fontconfig-devel-2.14.2-1.fc38.x86_6 4.2 MB/s | 164 kB 00:00 (110/647): fontconfig-2.14.2-1.fc38.x86_64.rpm 6.9 MB/s | 295 kB 00:00 (111/647): fonts-filesystem-2.0.5-11.fc38.noarc 237 kB/s | 8.1 kB 00:00 (112/647): freeimage-3.19.0-0.13.svn1889.fc38.x 8.0 MB/s | 362 kB 00:00 (113/647): freeimage-devel-3.19.0-0.13.svn1889. 1.3 MB/s | 41 kB 00:00 (114/647): freetype-2.13.0-1.fc39.x86_64.rpm 4.0 MB/s | 413 kB 00:00 (115/647): freetype-devel-2.13.0-1.fc39.x86_64. 9.6 MB/s | 946 kB 00:00 (116/647): boost-devel-1.81.0-1.fc39.x86_64.rpm 5.3 MB/s | 14 MB 00:02 (117/647): freexl-1.0.6-21.fc38.x86_64.rpm 567 kB/s | 35 kB 00:00 (118/647): gc-8.2.2-3.fc38.x86_64.rpm 2.0 MB/s | 110 kB 00:00 (119/647): fribidi-1.0.12-4.fc39.x86_64.rpm 1.2 MB/s | 89 kB 00:00 (120/647): gcc-gfortran-13.0.1-0.8.fc39.x86_64. 24 MB/s | 12 MB 00:00 (121/647): gcc-plugin-annobin-13.0.1-0.8.fc39.x 623 kB/s | 38 kB 00:00 (122/647): gd-2.3.3-11.fc39.x86_64.rpm 196 kB/s | 139 kB 00:00 (123/647): gdal-devel-3.6.3-1.fc39.x86_64.rpm 322 kB/s | 216 kB 00:00 (124/647): gcc-13.0.1-0.8.fc39.x86_64.rpm 8.1 MB/s | 34 MB 00:04 (125/647): gdk-pixbuf2-2.42.10-2.fc38.x86_64.rp 11 MB/s | 485 kB 00:00 (126/647): gdk-pixbuf2-modules-2.42.10-2.fc38.x 2.5 MB/s | 85 kB 00:00 (127/647): geos-3.11.2-1.fc39.x86_64.rpm 21 MB/s | 998 kB 00:00 (128/647): gettext-0.21.1-2.fc38.x86_64.rpm 20 MB/s | 1.0 MB 00:00 (129/647): gettext-envsubst-0.21.1-2.fc38.x86_6 1.0 MB/s | 36 kB 00:00 (130/647): gettext-libs-0.21.1-2.fc38.x86_64.rp 6.5 MB/s | 320 kB 00:00 (131/647): gettext-runtime-0.21.1-2.fc38.x86_64 347 kB/s | 117 kB 00:00 (132/647): giflib-5.2.1-15.fc38.x86_64.rpm 1.3 MB/s | 51 kB 00:00 (133/647): gl-manpages-1.1-26.20190306.fc38.noa 11 MB/s | 1.2 MB 00:00 (134/647): gl2ps-1.4.2-7.fc38.x86_64.rpm 329 kB/s | 64 kB 00:00 (135/647): gl2ps-devel-1.4.2-7.fc38.x86_64.rpm 801 kB/s | 236 kB 00:00 (136/647): glew-devel-2.2.0-4.fc38.x86_64.rpm 5.4 MB/s | 222 kB 00:00 (137/647): glib2-2.76.0-1.fc39.x86_64.rpm 8.7 MB/s | 2.8 MB 00:00 (138/647): glib2-devel-2.76.0-1.fc39.x86_64.rpm 6.7 MB/s | 587 kB 00:00 (139/647): glibc-devel-2.37.9000-3.fc39.x86_64. 1.6 MB/s | 60 kB 00:00 (140/647): glibc-headers-x86-2.37.9000-3.fc39.n 6.3 MB/s | 539 kB 00:00 (141/647): glx-utils-8.5.0-1.fc38.x86_64.rpm 1.2 MB/s | 40 kB 00:00 (142/647): gnutls-3.8.0-3.fc39.x86_64.rpm 8.6 MB/s | 1.1 MB 00:00 (143/647): gdal-libs-3.6.3-1.fc39.x86_64.rpm 1.9 MB/s | 8.1 MB 00:04 (144/647): google-noto-fonts-common-20230201-1. 484 kB/s | 16 kB 00:00 (145/647): google-droid-sans-fonts-20200215-14. 9.5 MB/s | 2.7 MB 00:00 (146/647): graphene-1.10.6-5.fc38.x86_64.rpm 1.6 MB/s | 62 kB 00:00 (147/647): graphite2-1.3.14-11.fc38.x86_64.rpm 2.2 MB/s | 95 kB 00:00 (148/647): graphite2-devel-1.3.14-11.fc38.x86_6 430 kB/s | 20 kB 00:00 (149/647): google-noto-sans-vf-fonts-20230201-1 1.7 MB/s | 580 kB 00:00 (150/647): gcc-c++-13.0.1-0.8.fc39.x86_64.rpm 1.9 MB/s | 13 MB 00:06 (151/647): gsm-1.0.22-2.fc38.x86_64.rpm 851 kB/s | 35 kB 00:00 (152/647): gssdp-1.6.2-2.fc38.x86_64.rpm 1.1 MB/s | 58 kB 00:00 (153/647): graphviz-7.1.0-2.fc38.x86_64.rpm 8.2 MB/s | 5.0 MB 00:00 (154/647): groff-base-1.22.4-11.fc38.x86_64.rpm 1.9 MB/s | 1.1 MB 00:00 (155/647): gstreamer1-plugins-bad-free-1.22.1-1 6.1 MB/s | 3.0 MB 00:00 (156/647): gtk-update-icon-cache-3.24.37-1.fc39 1.1 MB/s | 34 kB 00:00 (157/647): gstreamer1-1.22.1-1.fc39.x86_64.rpm 1.8 MB/s | 1.4 MB 00:00 (158/647): gts-0.7.6-44.20121130.fc38.x86_64.rp 946 kB/s | 240 kB 00:00 (159/647): gstreamer1-plugins-base-1.22.1-1.fc3 1.9 MB/s | 2.1 MB 00:01 (160/647): gupnp-1.6.3-2.fc38.x86_64.rpm 1.3 MB/s | 105 kB 00:00 (161/647): gupnp-igd-1.2.0-8.fc38.x86_64.rpm 1.0 MB/s | 34 kB 00:00 (162/647): gtk3-3.24.37-1.fc39.x86_64.rpm 5.3 MB/s | 4.8 MB 00:00 (163/647): harfbuzz-devel-7.1.0-1.fc39.x86_64.r 4.2 MB/s | 445 kB 00:00 (164/647): harfbuzz-icu-7.1.0-1.fc39.x86_64.rpm 438 kB/s | 16 kB 00:00 (165/647): hdf-libs-4.2.15-12.fc38.x86_64.rpm 2.8 MB/s | 294 kB 00:00 (166/647): harfbuzz-7.1.0-1.fc39.x86_64.rpm 2.0 MB/s | 889 kB 00:00 (167/647): hdf5-1.12.1-11.fc38.x86_64.rpm 5.4 MB/s | 2.2 MB 00:00 (168/647): hdf5-devel-1.12.1-11.fc38.x86_64.rpm 2.6 MB/s | 1.3 MB 00:00 (169/647): hdf5-mpich-1.12.1-11.fc38.x86_64.rpm 5.4 MB/s | 2.1 MB 00:00 (170/647): hicolor-icon-theme-0.17-15.fc38.noar 988 kB/s | 66 kB 00:00 (171/647): highway-1.0.4-1.fc39.x86_64.rpm 4.4 MB/s | 399 kB 00:00 (172/647): hdf5-mpich-devel-1.12.1-11.fc38.x86_ 3.1 MB/s | 1.3 MB 00:00 (173/647): hwdata-0.368-1.fc39.noarch.rpm 6.2 MB/s | 1.6 MB 00:00 (174/647): guile22-2.2.7-8.fc39.x86_64.rpm 3.2 MB/s | 6.5 MB 00:02 (175/647): hyphen-2.8.8-20.fc39.x86_64.rpm 640 kB/s | 29 kB 00:00 (176/647): imath-3.1.6-3.fc39.x86_64.rpm 2.7 MB/s | 98 kB 00:00 (177/647): irrXML-1.8.5-4.fc38.x86_64.rpm 1.1 MB/s | 40 kB 00:00 (178/647): jasper-libs-3.0.6-2.fc38.x86_64.rpm 4.5 MB/s | 163 kB 00:00 (179/647): java-17-openjdk-17.0.6.0.10-4.fc39.x 4.9 MB/s | 429 kB 00:00 (180/647): hwloc-libs-2.9.0-6.fc39.x86_64.rpm 3.8 MB/s | 2.2 MB 00:00 (181/647): javapackages-filesystem-6.1.0-8.fc39 331 kB/s | 13 kB 00:00 (182/647): jbig2dec-libs-0.19-8.fc38.x86_64.rpm 1.8 MB/s | 73 kB 00:00 (183/647): jbigkit-libs-2.1-25.fc38.x86_64.rpm 1.1 MB/s | 53 kB 00:00 (184/647): json-c-0.16-4.fc38.x86_64.rpm 1.0 MB/s | 41 kB 00:00 (185/647): json-devel-3.11.2-2.fc39.x86_64.rpm 1.1 MB/s | 164 kB 00:00 (186/647): json-glib-1.6.6-4.fc38.x86_64.rpm 1.3 MB/s | 162 kB 00:00 (187/647): jsoncpp-1.9.5-4.fc38.x86_64.rpm 1.0 MB/s | 97 kB 00:00 (188/647): iso-codes-4.13.0-1.fc39.noarch.rpm 3.9 MB/s | 3.5 MB 00:00 (189/647): jsoncpp-devel-1.9.5-4.fc38.x86_64.rp 427 kB/s | 29 kB 00:00 (190/647): jxrlib-1.1-24.fc38.x86_64.rpm 2.2 MB/s | 453 kB 00:00 (191/647): lame-libs-3.100-14.fc38.x86_64.rpm 3.0 MB/s | 337 kB 00:00 (192/647): langpacks-core-font-en-3.0-31.fc38.n 270 kB/s | 10 kB 00:00 (193/647): kernel-headers-6.3.0-0.rc3.git0.1.fc 3.3 MB/s | 1.5 MB 00:00 (194/647): lapack-devel-3.11.0-2.fc38.x86_64.rp 1.3 MB/s | 85 kB 00:00 (195/647): lapack64-3.11.0-2.fc38.x86_64.rpm 4.1 MB/s | 2.4 MB 00:00 (196/647): lapack64_-3.11.0-2.fc38.x86_64.rpm 4.8 MB/s | 2.4 MB 00:00 (197/647): lasi-1.1.3-10.fc38.x86_64.rpm 1.6 MB/s | 53 kB 00:00 (198/647): lcms2-2.15-1.fc39.x86_64.rpm 2.9 MB/s | 177 kB 00:00 (199/647): libGLEW-2.2.0-4.fc38.x86_64.rpm 3.1 MB/s | 175 kB 00:00 (200/647): libICE-1.0.10-10.fc38.x86_64.rpm 1.9 MB/s | 71 kB 00:00 (201/647): libICE-devel-1.0.10-10.fc38.x86_64.r 1.2 MB/s | 46 kB 00:00 (202/647): libSM-1.2.3-12.fc38.x86_64.rpm 1.2 MB/s | 41 kB 00:00 (203/647): libSM-devel-1.2.3-12.fc38.x86_64.rpm 211 kB/s | 12 kB 00:00 (204/647): libX11-1.8.4-1.fc38.x86_64.rpm 4.0 MB/s | 649 kB 00:00 (205/647): lapack-3.11.0-2.fc38.x86_64.rpm 5.4 MB/s | 9.6 MB 00:01 (206/647): libX11-common-1.8.4-1.fc38.noarch.rp 2.8 MB/s | 177 kB 00:00 (207/647): libX11-xcb-1.8.4-1.fc38.x86_64.rpm 329 kB/s | 11 kB 00:00 (208/647): libXScrnSaver-1.2.3-12.fc38.x86_64.r 619 kB/s | 24 kB 00:00 (209/647): libXScrnSaver-devel-1.2.3-12.fc38.x8 747 kB/s | 17 kB 00:00 (210/647): libXau-1.0.11-2.fc38.x86_64.rpm 721 kB/s | 32 kB 00:00 (211/647): libXau-devel-1.0.11-2.fc38.x86_64.rp 581 kB/s | 14 kB 00:00 (212/647): libX11-devel-1.8.4-1.fc38.x86_64.rpm 4.4 MB/s | 1.0 MB 00:00 (213/647): libXcomposite-0.4.5-9.fc38.x86_64.rp 518 kB/s | 23 kB 00:00 (214/647): libXcomposite-devel-0.4.5-9.fc38.x86 427 kB/s | 15 kB 00:00 (215/647): libXcursor-1.2.1-3.fc38.x86_64.rpm 580 kB/s | 30 kB 00:00 (216/647): libXcursor-devel-1.2.1-3.fc38.x86_64 1.3 MB/s | 40 kB 00:00 (217/647): libXdamage-1.1.5-9.fc38.x86_64.rpm 517 kB/s | 22 kB 00:00 (218/647): libXdmcp-1.1.3-10.fc38.x86_64.rpm 990 kB/s | 35 kB 00:00 (219/647): libXext-1.3.5-2.fc38.x86_64.rpm 1.1 MB/s | 39 kB 00:00 (220/647): libXdmcp-devel-1.1.3-10.fc38.x86_64. 271 kB/s | 11 kB 00:00 (221/647): libXext-devel-1.3.5-2.fc38.x86_64.rp 2.0 MB/s | 85 kB 00:00 (222/647): libXfixes-6.0.0-5.fc38.x86_64.rpm 436 kB/s | 19 kB 00:00 (223/647): libXft-2.3.6-2.fc38.x86_64.rpm 2.2 MB/s | 71 kB 00:00 (224/647): libXfixes-devel-6.0.0-5.fc38.x86_64. 322 kB/s | 12 kB 00:00 (225/647): libXft-devel-2.3.6-2.fc38.x86_64.rpm 1.2 MB/s | 50 kB 00:00 (226/647): libXi-1.8-4.fc38.x86_64.rpm 1.0 MB/s | 40 kB 00:00 (227/647): libXinerama-1.1.5-2.fc38.x86_64.rpm 312 kB/s | 14 kB 00:00 (228/647): libXinerama-devel-1.1.5-2.fc38.x86_6 294 kB/s | 13 kB 00:00 (229/647): libXi-devel-1.8-4.fc38.x86_64.rpm 511 kB/s | 116 kB 00:00 (230/647): libXmu-devel-1.1.4-2.fc38.x86_64.rpm 134 kB/s | 27 kB 00:00 (231/647): libXpm-3.5.15-3.fc38.x86_64.rpm 821 kB/s | 63 kB 00:00 (232/647): libXpm-devel-3.5.15-3.fc38.x86_64.rp 1.7 MB/s | 66 kB 00:00 (233/647): libXrandr-1.5.2-10.fc38.x86_64.rpm 585 kB/s | 27 kB 00:00 (234/647): libXmu-1.1.4-2.fc38.x86_64.rpm 151 kB/s | 77 kB 00:00 (235/647): libXrandr-devel-1.5.2-10.fc38.x86_64 496 kB/s | 19 kB 00:00 (236/647): libXrender-devel-0.9.11-2.fc38.x86_6 835 kB/s | 19 kB 00:00 (237/647): libXrender-0.9.11-2.fc38.x86_64.rpm 476 kB/s | 27 kB 00:00 (238/647): libXres-1.2.1-4.fc38.x86_64.rpm 426 kB/s | 15 kB 00:00 (239/647): libXres-devel-1.2.1-4.fc38.x86_64.rp 266 kB/s | 12 kB 00:00 (240/647): libXt-1.2.1-4.fc38.x86_64.rpm 2.3 MB/s | 179 kB 00:00 (241/647): libXtst-1.2.4-2.fc38.x86_64.rpm 538 kB/s | 20 kB 00:00 (242/647): libXtst-devel-1.2.4-2.fc38.x86_64.rp 445 kB/s | 16 kB 00:00 (243/647): libXv-1.0.11-18.fc38.x86_64.rpm 488 kB/s | 18 kB 00:00 (244/647): libXv-devel-1.0.11-18.fc38.x86_64.rp 448 kB/s | 44 kB 00:00 (245/647): libXxf86vm-1.1.5-2.fc38.x86_64.rpm 371 kB/s | 18 kB 00:00 (246/647): libaec-1.0.6-4.fc38.x86_64.rpm 1.7 MB/s | 42 kB 00:00 (247/647): libaec-devel-1.0.6-4.fc38.x86_64.rpm 218 kB/s | 12 kB 00:00 (248/647): libXt-devel-1.2.1-4.fc38.x86_64.rpm 1.0 MB/s | 460 kB 00:00 (249/647): libappstream-glib-0.8.2-2.fc38.x86_6 1.4 MB/s | 402 kB 00:00 (250/647): libarchive-devel-3.6.1-5.fc39.x86_64 1.2 MB/s | 134 kB 00:00 (251/647): libasyncns-0.8-24.fc38.x86_64.rpm 698 kB/s | 30 kB 00:00 (252/647): libaom-3.6.0-1.fc39.x86_64.rpm 3.6 MB/s | 1.8 MB 00:00 (253/647): libb2-0.98.1-8.fc38.x86_64.rpm 660 kB/s | 25 kB 00:00 (254/647): libavif-0.11.1-9.fc39.x86_64.rpm 1.1 MB/s | 84 kB 00:00 (255/647): libblkid-devel-2.38.1-4.fc38.x86_64. 365 kB/s | 16 kB 00:00 (256/647): libcloudproviders-0.3.1-7.fc38.x86_6 860 kB/s | 44 kB 00:00 (257/647): libdatrie-0.2.13-5.fc38.x86_64.rpm 705 kB/s | 32 kB 00:00 (258/647): libcurl-devel-8.0.1-1.fc39.x86_64.rp 4.1 MB/s | 987 kB 00:00 (259/647): libdrm-2.4.114-2.fc38.x86_64.rpm 2.9 MB/s | 157 kB 00:00 (260/647): libdav1d-1.1.0-1.fc39.x86_64.rpm 2.0 MB/s | 606 kB 00:00 (261/647): libdrm-devel-2.4.114-2.fc38.x86_64.r 2.7 MB/s | 174 kB 00:00 (262/647): libdvdread-6.1.3-3.fc38.x86_64.rpm 1.5 MB/s | 72 kB 00:00 (263/647): libdvdnav-6.1.1-5.fc38.x86_64.rpm 948 kB/s | 55 kB 00:00 (264/647): libedit-3.1-45.20221030cvs.fc38.x86_ 1.9 MB/s | 107 kB 00:00 (265/647): libevdev-1.13.0-2.fc38.x86_64.rpm 1.4 MB/s | 44 kB 00:00 (266/647): libepoxy-1.5.10-3.fc38.x86_64.rpm 2.0 MB/s | 237 kB 00:00 (267/647): libffi-devel-3.4.4-2.fc38.x86_64.rpm 675 kB/s | 29 kB 00:00 (268/647): libfontenc-1.1.6-2.fc38.x86_64.rpm 827 kB/s | 32 kB 00:00 (269/647): libgeotiff-1.7.1-7.fc39.x86_64.rpm 2.7 MB/s | 105 kB 00:00 (270/647): libglvnd-1.6.0-2.fc38.x86_64.rpm 2.2 MB/s | 134 kB 00:00 (271/647): libglvnd-core-devel-1.6.0-2.fc38.x86 424 kB/s | 18 kB 00:00 (272/647): libglvnd-devel-1.6.0-2.fc38.x86_64.r 2.6 MB/s | 163 kB 00:00 (273/647): libglvnd-egl-1.6.0-2.fc38.x86_64.rpm 885 kB/s | 36 kB 00:00 (274/647): libglvnd-gles-1.6.0-2.fc38.x86_64.rp 718 kB/s | 32 kB 00:00 (275/647): libglvnd-glx-1.6.0-2.fc38.x86_64.rpm 2.5 MB/s | 142 kB 00:00 (276/647): libgfortran-13.0.1-0.8.fc39.x86_64.r 2.6 MB/s | 897 kB 00:00 (277/647): libglvnd-opengl-1.6.0-2.fc38.x86_64. 1.0 MB/s | 43 kB 00:00 (278/647): libgta-1.2.1-9.fc38.x86_64.rpm 989 kB/s | 35 kB 00:00 (279/647): libgudev-237-4.fc38.x86_64.rpm 937 kB/s | 35 kB 00:00 (280/647): libgusb-0.4.5-1.fc38.x86_64.rpm 1.7 MB/s | 63 kB 00:00 (281/647): libharu-2.4.3-2.fc38.x86_64.rpm 3.9 MB/s | 580 kB 00:00 (282/647): libharu-devel-2.4.3-2.fc38.x86_64.rp 1.0 MB/s | 47 kB 00:00 (283/647): java-17-openjdk-headless-17.0.6.0.10 6.1 MB/s | 42 MB 00:06 (284/647): libgs-10.0.0-4.fc39.x86_64.rpm 3.5 MB/s | 3.5 MB 00:01 (285/647): libicu-devel-72.1-2.fc38.x86_64.rpm 4.8 MB/s | 918 kB 00:00 (286/647): libijs-0.35-17.fc38.x86_64.rpm 221 kB/s | 29 kB 00:00 (287/647): libimagequant-4.0.1-4.fc39.x86_64.rp 3.7 MB/s | 302 kB 00:00 (288/647): libinput-1.22.1-2.fc38.x86_64.rpm 3.1 MB/s | 209 kB 00:00 (289/647): libjpeg-turbo-2.1.4-2.fc38.x86_64.rp 3.1 MB/s | 183 kB 00:00 (290/647): libjpeg-turbo-devel-2.1.4-2.fc38.x86 1.4 MB/s | 98 kB 00:00 (291/647): libkdtree++-devel-0.7.0-34.fc38.noar 917 kB/s | 30 kB 00:00 (292/647): libkml-1.3.0-43.fc38.x86_64.rpm 3.2 MB/s | 355 kB 00:00 (293/647): libjxl-0.7.0-6.fc38.x86_64.rpm 4.0 MB/s | 1.0 MB 00:00 (294/647): liblerc-4.0.0-3.fc38.x86_64.rpm 1.4 MB/s | 202 kB 00:00 (295/647): libmount-devel-2.38.1-4.fc38.x86_64. 367 kB/s | 18 kB 00:00 (296/647): libmpc-1.3.1-2.fc38.x86_64.rpm 864 kB/s | 70 kB 00:00 (297/647): libmng-2.0.3-18.fc39.x86_64.rpm 781 kB/s | 187 kB 00:00 (298/647): libnice-0.1.21-3.fc38.x86_64.rpm 570 kB/s | 199 kB 00:00 (299/647): libogg-devel-1.3.5-5.fc38.x86_64.rpm 287 kB/s | 13 kB 00:00 (300/647): libpaper-2.0.10-1.fc39.x86_64.rpm 342 kB/s | 26 kB 00:00 (301/647): libpciaccess-0.16-8.fc38.x86_64.rpm 330 kB/s | 26 kB 00:00 (302/647): libpciaccess-devel-0.16-8.fc38.x86_6 307 kB/s | 12 kB 00:00 (303/647): libogg-1.3.5-5.fc38.x86_64.rpm 59 kB/s | 33 kB 00:00 (304/647): libpng-1.6.37-14.fc38.x86_64.rpm 781 kB/s | 120 kB 00:00 (305/647): libpng-devel-1.6.37-14.fc38.x86_64.r 894 kB/s | 291 kB 00:00 (306/647): libpq-devel-15.0-3.fc38.x86_64.rpm 600 kB/s | 106 kB 00:00 (307/647): libproxy-0.4.18-5.fc38.x86_64.rpm 564 kB/s | 71 kB 00:00 (308/647): libqhull_r-7.2.1-12.fc38.x86_64.rpm 2.9 MB/s | 167 kB 00:00 (309/647): libquadmath-13.0.1-0.8.fc39.x86_64.r 4.1 MB/s | 187 kB 00:00 (310/647): libpq-15.0-3.fc38.x86_64.rpm 358 kB/s | 213 kB 00:00 (311/647): libquadmath-devel-13.0.1-0.8.fc39.x8 811 kB/s | 28 kB 00:00 (312/647): libraqm-0.8.0-4.fc38.x86_64.rpm 430 kB/s | 20 kB 00:00 (313/647): librsvg2-2.55.90-1.fc39.x86_64.rpm 23 MB/s | 3.1 MB 00:00 (314/647): libselinux-devel-3.5-1.fc39.x86_64.r 3.8 MB/s | 151 kB 00:00 (315/647): libsepol-devel-3.5-1.fc39.x86_64.rpm 1.1 MB/s | 49 kB 00:00 (316/647): libsndfile-1.1.0-6.fc38.x86_64.rpm 5.4 MB/s | 214 kB 00:00 (317/647): libsoup3-3.4.0-2.fc39.x86_64.rpm 7.9 MB/s | 387 kB 00:00 (318/647): librttopo-1.1.0-11.fc38.x86_64.rpm 708 kB/s | 208 kB 00:00 (319/647): libspnav-1.0-3.fc38.x86_64.rpm 597 kB/s | 24 kB 00:00 (320/647): libspnav-devel-1.0-3.fc38.x86_64.rpm 624 kB/s | 20 kB 00:00 (321/647): libsrtp-2.3.0-10.fc38.x86_64.rpm 1.3 MB/s | 57 kB 00:00 (322/647): libstdc++-devel-13.0.1-0.8.fc39.x86_ 23 MB/s | 2.6 MB 00:00 (323/647): libstemmer-2.2.0-5.fc38.x86_64.rpm 4.3 MB/s | 168 kB 00:00 (324/647): libthai-0.1.29-4.fc38.x86_64.rpm 5.2 MB/s | 213 kB 00:00 (325/647): libtheora-1.1.1-33.fc38.x86_64.rpm 4.3 MB/s | 166 kB 00:00 (326/647): libtheora-devel-1.1.1-33.fc38.x86_64 923 kB/s | 31 kB 00:00 (327/647): libtiff-4.4.0-5.fc38.x86_64.rpm 5.5 MB/s | 197 kB 00:00 (328/647): libtiff-devel-4.4.0-5.fc38.x86_64.rp 12 MB/s | 546 kB 00:00 (329/647): libtool-ltdl-2.4.7-6.fc38.x86_64.rpm 897 kB/s | 37 kB 00:00 (330/647): libtracker-sparql-3.5.0-1.fc39.x86_6 9.1 MB/s | 375 kB 00:00 (331/647): libunistring-1.1-3.fc38.x86_64.rpm 8.9 MB/s | 545 kB 00:00 (332/647): libunwind-1.7.0-0.1.rc2.fc39.x86_64. 1.8 MB/s | 70 kB 00:00 (333/647): libusb1-1.0.26-2.fc38.x86_64.rpm 1.8 MB/s | 74 kB 00:00 (334/647): libuv-1.44.2-3.fc38.x86_64.rpm 3.7 MB/s | 152 kB 00:00 (335/647): libva-2.17.0-2.fc38.x86_64.rpm 2.4 MB/s | 104 kB 00:00 (336/647): libvisual-0.4.0-38.fc38.x86_64.rpm 3.4 MB/s | 143 kB 00:00 (337/647): libvmaf-2.3.0-5.fc38.x86_64.rpm 4.4 MB/s | 180 kB 00:00 (338/647): libvorbis-1.3.7-7.fc38.x86_64.rpm 3.5 MB/s | 195 kB 00:00 (339/647): libvpx-1.13.0-2.fc39.x86_64.rpm 7.8 MB/s | 1.1 MB 00:00 (340/647): libwacom-2.6.0-1.fc38.x86_64.rpm 1.1 MB/s | 42 kB 00:00 (341/647): libwacom-data-2.6.0-1.fc38.noarch.rp 2.9 MB/s | 184 kB 00:00 (342/647): libwayland-client-1.21.0-2.fc38.x86_ 877 kB/s | 34 kB 00:00 (343/647): libwayland-cursor-1.21.0-2.fc38.x86_ 572 kB/s | 19 kB 00:00 (344/647): libwayland-egl-1.21.0-2.fc38.x86_64. 366 kB/s | 13 kB 00:00 (345/647): libwayland-server-1.21.0-2.fc38.x86_ 1.2 MB/s | 42 kB 00:00 (346/647): libwebp-1.3.0-2.fc38.x86_64.rpm 5.2 MB/s | 282 kB 00:00 (347/647): libxcb-1.13.1-11.fc38.x86_64.rpm 5.1 MB/s | 231 kB 00:00 (348/647): libxcb-devel-1.13.1-11.fc38.x86_64.r 18 MB/s | 1.4 MB 00:00 (349/647): libxcrypt-devel-4.4.33-7.fc39.x86_64 753 kB/s | 30 kB 00:00 (350/647): libxkbcommon-1.5.0-2.fc38.x86_64.rpm 5.5 MB/s | 140 kB 00:00 (351/647): libxkbcommon-x11-1.5.0-2.fc38.x86_64 591 kB/s | 22 kB 00:00 (352/647): libxkbfile-1.1.1-2.fc38.x86_64.rpm 2.0 MB/s | 90 kB 00:00 (353/647): libxkbfile-devel-1.1.1-2.fc38.x86_64 381 kB/s | 15 kB 00:00 (354/647): libspatialite-5.0.1-21.fc39.x86_64.r 1.7 MB/s | 3.1 MB 00:01 (355/647): libxshmfence-1.3-12.fc38.x86_64.rpm 254 kB/s | 12 kB 00:00 (356/647): libicu-72.1-2.fc38.x86_64.rpm 2.1 MB/s | 10 MB 00:05 (357/647): lilv-libs-0.24.14-4.fc38.x86_64.rpm 632 kB/s | 58 kB 00:00 (358/647): libxml2-devel-2.10.3-3.fc38.x86_64.r 951 kB/s | 531 kB 00:00 (359/647): libxslt-1.1.37-3.fc39.x86_64.rpm 327 kB/s | 184 kB 00:00 (360/647): lksctp-tools-1.0.19-3.fc38.x86_64.rp 238 kB/s | 92 kB 00:00 (361/647): lua-filesystem-1.8.0-8.fc38.x86_64.r 57 kB/s | 34 kB 00:00 (362/647): lua-json-1.3.4-3.fc38.noarch.rpm 171 kB/s | 30 kB 00:00 (363/647): lua-lpeg-1.0.2-10.fc38.x86_64.rpm 383 kB/s | 67 kB 00:00 (364/647): lua-5.4.4-9.fc39.x86_64.rpm 178 kB/s | 190 kB 00:01 (365/647): lua-term-0.07-17.fc38.x86_64.rpm 180 kB/s | 15 kB 00:00 (366/647): lua-posix-36.1-1.fc39.x86_64.rpm 577 kB/s | 140 kB 00:00 (367/647): lz4-devel-1.9.4-2.fc38.x86_64.rpm 282 kB/s | 31 kB 00:00 (368/647): m4-1.4.19-4.fc37.x86_64.rpm 664 kB/s | 303 kB 00:00 (369/647): mariadb-connector-c-3.2.7-3.fc38.x86 1.0 MB/s | 196 kB 00:00 (370/647): mariadb-connector-c-config-3.2.7-3.f 211 kB/s | 8.7 kB 00:00 (371/647): make-4.4-3.fc38.x86_64.rpm 852 kB/s | 580 kB 00:00 (372/647): mariadb-connector-c-devel-3.2.7-3.fc 909 kB/s | 53 kB 00:00 (373/647): med-devel-4.1.0-11.fc38.x86_64.rpm 816 kB/s | 49 kB 00:00 (374/647): mesa-filesystem-23.0.0-1.fc39.x86_64 495 kB/s | 18 kB 00:00 (375/647): mesa-libEGL-23.0.0-1.fc39.x86_64.rpm 1.0 MB/s | 131 kB 00:00 (376/647): mesa-libEGL-devel-23.0.0-1.fc39.x86_ 420 kB/s | 21 kB 00:00 (377/647): med-4.1.0-11.fc38.x86_64.rpm 1.5 MB/s | 543 kB 00:00 (378/647): mesa-libGL-devel-23.0.0-1.fc39.x86_6 1.0 MB/s | 36 kB 00:00 (379/647): mesa-libGL-23.0.0-1.fc39.x86_64.rpm 1.4 MB/s | 174 kB 00:00 (380/647): mesa-libGLU-devel-9.0.1-8.fc38.x86_6 436 kB/s | 13 kB 00:00 (381/647): mesa-libgbm-23.0.0-1.fc39.x86_64.rpm 728 kB/s | 45 kB 00:00 (382/647): mesa-libGLU-9.0.1-8.fc38.x86_64.rpm 1.5 MB/s | 155 kB 00:00 (383/647): minizip-ng-3.0.7-3.fc38.x86_64.rpm 1.2 MB/s | 70 kB 00:00 (384/647): mesa-libglapi-23.0.0-1.fc39.x86_64.r 854 kB/s | 54 kB 00:00 (385/647): mkfontscale-1.2.2-3.fc38.x86_64.rpm 861 kB/s | 32 kB 00:00 (386/647): mpdecimal-2.5.1-6.fc38.x86_64.rpm 1.1 MB/s | 89 kB 00:00 (387/647): mpg123-libs-1.31.3-1.fc39.x86_64.rpm 1.8 MB/s | 340 kB 00:00 (388/647): mpich-devel-4.0.3-1.fc39.x86_64.rpm 2.5 MB/s | 1.4 MB 00:00 (389/647): mpich-4.0.3-1.fc39.x86_64.rpm 2.3 MB/s | 1.7 MB 00:00 (390/647): mtdev-1.1.6-5.fc38.x86_64.rpm 493 kB/s | 21 kB 00:00 (391/647): netcdf-cxx-4.2-31.fc38.x86_64.rpm 1.0 MB/s | 44 kB 00:00 (392/647): ncurses-6.4-3.20230114.fc38.x86_64.r 2.5 MB/s | 412 kB 00:00 (393/647): netcdf-cxx-devel-4.2-31.fc38.x86_64. 2.5 MB/s | 374 kB 00:00 (394/647): netpbm-11.01.00-2.fc38.x86_64.rpm 2.3 MB/s | 184 kB 00:00 (395/647): nspr-4.35.0-5.fc39.x86_64.rpm 2.3 MB/s | 136 kB 00:00 (396/647): nettle-3.8-3.fc38.x86_64.rpm 2.8 MB/s | 412 kB 00:00 (397/647): nss-3.88.1-2.fc39.x86_64.rpm 2.8 MB/s | 691 kB 00:00 (398/647): nss-softokn-3.88.1-2.fc39.x86_64.rpm 3.3 MB/s | 1.0 MB 00:00 (399/647): nss-sysinit-3.88.1-2.fc39.x86_64.rpm 557 kB/s | 18 kB 00:00 (400/647): nss-softokn-freebl-3.88.1-2.fc39.x86 1.6 MB/s | 325 kB 00:00 (401/647): nss-util-3.88.1-2.fc39.x86_64.rpm 1.1 MB/s | 86 kB 00:00 (402/647): ogdi-4.1.0-10.fc38.x86_64.rpm 2.7 MB/s | 244 kB 00:00 (403/647): openblas-0.3.21-4.fc38.x86_64.rpm 859 kB/s | 35 kB 00:00 (404/647): openal-soft-1.23.0-1.fc38.x86_64.rpm 3.1 MB/s | 572 kB 00:00 (405/647): openblas-openmp64-0.3.21-4.fc38.x86_ 3.6 MB/s | 4.9 MB 00:01 (406/647): openblas-openmp-0.3.21-4.fc38.x86_64 3.4 MB/s | 5.1 MB 00:01 (407/647): llvm-libs-15.0.7-2.fc38.x86_64.rpm 3.8 MB/s | 25 MB 00:06 (408/647): opencascade-draw-7.6.3-3.fc38.x86_64 2.7 MB/s | 2.4 MB 00:00 (409/647): opencascade-devel-7.6.3-3.fc38.x86_6 3.6 MB/s | 5.1 MB 00:01 (410/647): opencascade-ocaf-7.6.3-3.fc38.x86_64 3.8 MB/s | 1.2 MB 00:00 (411/647): opencascade-visualization-7.6.3-3.fc 4.4 MB/s | 2.1 MB 00:00 (412/647): openexr-libs-3.1.6-1.fc39.x86_64.rpm 4.6 MB/s | 1.1 MB 00:00 (413/647): openjpeg2-2.5.0-3.fc38.x86_64.rpm 2.9 MB/s | 178 kB 00:00 (414/647): openslide-3.4.1-23.fc38.x86_64.rpm 2.4 MB/s | 106 kB 00:00 (415/647): openslide-devel-3.4.1-23.fc38.x86_64 333 kB/s | 13 kB 00:00 (416/647): openssl-devel-3.0.8-1.fc39.x86_64.rp 5.3 MB/s | 2.6 MB 00:00 (417/647): opus-1.3.1-12.fc39.x86_64.rpm 3.3 MB/s | 206 kB 00:00 (418/647): opencascade-foundation-7.6.3-3.fc38. 4.5 MB/s | 13 MB 00:02 (419/647): orc-0.4.33-2.fc38.x86_64.rpm 443 kB/s | 202 kB 00:00 (420/647): pciutils-libs-3.9.0-3.fc38.x86_64.rp 788 kB/s | 44 kB 00:00 (421/647): pango-1.50.14-1.fc39.x86_64.rpm 2.4 MB/s | 342 kB 00:00 (422/647): pcre-8.45-1.fc38.3.x86_64.rpm 3.3 MB/s | 201 kB 00:00 (423/647): pcre2-utf16-10.42-1.fc38.1.x86_64.rp 3.9 MB/s | 214 kB 00:00 (424/647): pcre2-devel-10.42-1.fc38.1.x86_64.rp 4.4 MB/s | 506 kB 00:00 (425/647): pcre2-utf32-10.42-1.fc38.1.x86_64.rp 3.2 MB/s | 201 kB 00:00 (426/647): perl-Carp-1.52-490.fc38.noarch.rpm 1.2 MB/s | 29 kB 00:00 (427/647): perl-Class-Struct-0.66-495.fc38.noar 1.1 MB/s | 24 kB 00:00 (428/647): perl-B-1.83-495.fc38.x86_64.rpm 2.7 MB/s | 184 kB 00:00 (429/647): perl-DynaLoader-1.52-495.fc38.x86_64 857 kB/s | 28 kB 00:00 (430/647): perl-Data-Dumper-2.184-491.fc38.x86_ 1.5 MB/s | 56 kB 00:00 (431/647): perl-English-1.11-495.fc38.noarch.rp 419 kB/s | 16 kB 00:00 (432/647): perl-Errno-1.36-495.fc38.x86_64.rpm 420 kB/s | 17 kB 00:00 (433/647): perl-Exporter-5.77-490.fc38.noarch.r 1.4 MB/s | 31 kB 00:00 (434/647): perl-Fcntl-1.15-495.fc38.x86_64.rpm 570 kB/s | 23 kB 00:00 (435/647): perl-File-Basename-2.85-495.fc38.noa 889 kB/s | 19 kB 00:00 (436/647): perl-File-Compare-1.100.700-495.fc38 701 kB/s | 15 kB 00:00 (437/647): opencascade-modeling-7.6.3-3.fc38.x8 4.3 MB/s | 14 MB 00:03 (438/647): perl-File-Copy-2.39-495.fc38.noarch. 581 kB/s | 22 kB 00:00 (439/647): perl-File-Find-1.40-495.fc38.noarch. 1.2 MB/s | 27 kB 00:00 (440/647): perl-File-Temp-0.231.100-490.fc38.no 2.6 MB/s | 59 kB 00:00 (441/647): perl-File-stat-1.12-495.fc38.noarch. 890 kB/s | 19 kB 00:00 (442/647): perl-Encode-3.19-493.fc38.x86_64.rpm 5.4 MB/s | 1.7 MB 00:00 (443/647): perl-Getopt-Long-2.54-2.fc38.noarch. 2.6 MB/s | 60 kB 00:00 (444/647): perl-File-Path-2.18-490.fc38.noarch. 374 kB/s | 35 kB 00:00 (445/647): perl-Getopt-Std-1.13-495.fc38.noarch 812 kB/s | 18 kB 00:00 (446/647): perl-HTTP-Tiny-0.082-2.fc38.noarch.r 2.4 MB/s | 55 kB 00:00 (447/647): perl-IPC-Open3-1.22-495.fc38.noarch. 1.1 MB/s | 25 kB 00:00 (448/647): perl-MIME-Base64-3.16-490.fc38.x86_6 844 kB/s | 30 kB 00:00 (449/647): perl-IO-1.50-495.fc38.x86_64.rpm 1.5 MB/s | 94 kB 00:00 (450/647): perl-Pod-Escapes-1.07-490.fc38.noarc 896 kB/s | 20 kB 00:00 (451/647): perl-POSIX-2.03-495.fc38.x86_64.rpm 2.0 MB/s | 100 kB 00:00 (452/647): perl-PathTools-3.84-490.fc38.x86_64. 2.1 MB/s | 87 kB 00:00 (453/647): perl-Pod-Perldoc-3.28.01-491.fc38.no 3.8 MB/s | 86 kB 00:00 (454/647): perl-Pod-Usage-2.03-4.fc38.noarch.rp 1.6 MB/s | 40 kB 00:00 (455/647): perl-Pod-Simple-3.43-491.fc38.noarch 4.7 MB/s | 219 kB 00:00 (456/647): perl-SelectSaver-1.02-495.fc38.noarc 630 kB/s | 14 kB 00:00 (457/647): perl-Socket-2.036-2.fc38.x86_64.rpm 1.4 MB/s | 55 kB 00:00 (458/647): perl-Scalar-List-Utils-1.63-490.fc38 1.0 MB/s | 72 kB 00:00 (459/647): perl-Storable-3.26-490.fc38.x86_64.r 2.4 MB/s | 97 kB 00:00 (460/647): perl-Symbol-1.09-495.fc38.noarch.rpm 749 kB/s | 16 kB 00:00 (461/647): perl-Term-ANSIColor-5.01-491.fc38.no 2.1 MB/s | 47 kB 00:00 (462/647): perl-Term-Cap-1.18-1.fc39.noarch.rpm 1.0 MB/s | 22 kB 00:00 (463/647): perl-Text-ParseWords-3.31-490.fc38.n 737 kB/s | 16 kB 00:00 (464/647): perl-Text-Tabs+Wrap-2021.0814-490.fc 1.0 MB/s | 22 kB 00:00 (465/647): perl-Thread-Queue-3.14-490.fc38.noar 973 kB/s | 21 kB 00:00 (466/647): perl-Time-Local-1.300-490.fc38.noarc 1.5 MB/s | 33 kB 00:00 (467/647): perl-constant-1.33-491.fc38.noarch.r 1.0 MB/s | 23 kB 00:00 (468/647): perl-if-0.61.000-495.fc38.noarch.rpm 747 kB/s | 16 kB 00:00 (469/647): perl-interpreter-5.36.0-495.fc38.x86 2.2 MB/s | 74 kB 00:00 (470/647): perl-mro-1.26-495.fc38.x86_64.rpm 812 kB/s | 31 kB 00:00 (471/647): perl-overload-1.35-495.fc38.noarch.r 2.1 MB/s | 48 kB 00:00 (472/647): perl-overloading-0.02-495.fc38.noarc 695 kB/s | 15 kB 00:00 (473/647): perl-parent-0.241-1.fc39.noarch.rpm 665 kB/s | 14 kB 00:00 (474/647): perl-podlators-5.01-2.fc38.noarch.rp 5.3 MB/s | 125 kB 00:00 (475/647): perl-threads-2.27-490.fc38.x86_64.rp 1.3 MB/s | 57 kB 00:00 (476/647): perl-threads-shared-1.64-490.fc38.x8 985 kB/s | 44 kB 00:00 (477/647): perl-libs-5.36.0-495.fc38.x86_64.rpm 16 MB/s | 2.2 MB 00:00 (478/647): perl-vars-1.05-495.fc38.noarch.rpm 669 kB/s | 15 kB 00:00 (479/647): poly2tri-0.0-26.20130501hg26242d0aa7 697 kB/s | 31 kB 00:00 (480/647): poppler-23.02.0-1.fc38.x86_64.rpm 21 MB/s | 1.2 MB 00:00 (481/647): pixman-0.42.2-1.fc39.x86_64.rpm 4.1 MB/s | 284 kB 00:00 (482/647): poppler-glib-23.02.0-1.fc38.x86_64.r 4.5 MB/s | 177 kB 00:00 (483/647): procps-ng-3.3.17-9.fc38.x86_64.rpm 3.5 MB/s | 339 kB 00:00 (484/647): proj-9.2.0-1.fc39.x86_64.rpm 7.7 MB/s | 1.5 MB 00:00 (485/647): proj-devel-9.2.0-1.fc39.x86_64.rpm 2.3 MB/s | 87 kB 00:00 (486/647): pugixml-1.13-2.fc38.x86_64.rpm 2.4 MB/s | 100 kB 00:00 (487/647): proj-data-9.2.0-1.fc39.noarch.rpm 5.6 MB/s | 1.3 MB 00:00 (488/647): poppler-data-0.4.11-4.fc38.noarch.rp 5.7 MB/s | 2.0 MB 00:00 (489/647): pugixml-devel-1.13-2.fc38.x86_64.rpm 578 kB/s | 23 kB 00:00 (490/647): pyside2-tools-5.15.7-2.fc38.x86_64.r 2.2 MB/s | 85 kB 00:00 (491/647): pyproject-rpm-macros-1.6.3-1.fc39.no 963 kB/s | 41 kB 00:00 (492/647): pulseaudio-libs-16.1-4.fc38.x86_64.r 4.8 MB/s | 694 kB 00:00 (493/647): python-rpm-macros-3.11-10.fc39.noarc 161 kB/s | 20 kB 00:00 (494/647): python-pip-wheel-23.0.1-1.fc39.noarc 8.8 MB/s | 1.4 MB 00:00 (495/647): python3-3.11.2-1.fc39.x86_64.rpm 591 kB/s | 28 kB 00:00 (496/647): python3-appdirs-1.4.4-8.fc38.noarch. 590 kB/s | 23 kB 00:00 (497/647): python3-cairo-1.23.0-2.fc38.x86_64.r 3.3 MB/s | 125 kB 00:00 (498/647): python3-brotli-1.0.9-11.fc38.x86_64. 4.2 MB/s | 320 kB 00:00 (499/647): python3-contourpy-1.0.7-2.fc38.x86_6 5.0 MB/s | 237 kB 00:00 (500/647): python3-cycler-0.11.0-7.fc38.noarch. 537 kB/s | 21 kB 00:00 (501/647): python-setuptools-wheel-65.5.1-2.fc3 3.3 MB/s | 715 kB 00:00 (502/647): python3-dateutil-2.8.2-6.fc39.noarch 8.1 MB/s | 360 kB 00:00 (503/647): python3-devel-3.11.2-1.fc39.x86_64.r 4.2 MB/s | 269 kB 00:00 (504/647): python3-fs-2.4.16-1.fc39.noarch.rpm 7.3 MB/s | 312 kB 00:00 (505/647): python3-kiwisolver-1.4.4-7.fc38.x86_ 1.4 MB/s | 66 kB 00:00 (506/647): python3-fonttools-4.39.2-1.fc39.x86_ 21 MB/s | 2.8 MB 00:00 (507/647): python3-matplotlib-3.7.1-1.fc39.x86_ 22 MB/s | 4.3 MB 00:00 (508/647): python3-libs-3.11.2-1.fc39.x86_64.rp 33 MB/s | 9.6 MB 00:00 (509/647): python3-matplotlib-data-3.7.1-1.fc39 11 MB/s | 543 kB 00:00 (510/647): python3-matplotlib-tk-3.7.1-1.fc39.x 1.4 MB/s | 53 kB 00:00 (511/647): python3-munkres-1.1.2-14.fc38.noarch 572 kB/s | 26 kB 00:00 (512/647): python3-lxml-4.9.2-2.fc38.x86_64.rpm 3.5 MB/s | 1.3 MB 00:00 (513/647): python3-matplotlib-data-fonts-3.7.1- 20 MB/s | 2.3 MB 00:00 (514/647): python3-olefile-0.46-19.fc38.noarch. 1.2 MB/s | 67 kB 00:00 (515/647): python3-packaging-23.0-1.fc38.noarch 2.3 MB/s | 106 kB 00:00 (516/647): python3-numpy-f2py-1.24.1-3.fc39.x86 3.8 MB/s | 498 kB 00:00 (517/647): python3-pillow-9.4.0-3.fc39.x86_64.r 17 MB/s | 921 kB 00:00 (518/647): python3-pillow-tk-9.4.0-3.fc39.x86_6 654 kB/s | 30 kB 00:00 (519/647): python3-numpy-1.24.1-3.fc39.x86_64.r 34 MB/s | 7.8 MB 00:00 (520/647): python3-pycxx-devel-7.1.7-4.fc38.noa 2.3 MB/s | 73 kB 00:00 (521/647): python3-pyparsing-3.0.9-3.fc38.noarc 6.1 MB/s | 262 kB 00:00 (522/647): python3-pivy-0.6.8-2.fc38.x86_64.rpm 19 MB/s | 2.4 MB 00:00 (523/647): python3-pyside2-devel-5.15.7-2.fc38. 5.0 MB/s | 228 kB 00:00 (524/647): python3-rpm-generators-14-3.fc39.noa 834 kB/s | 30 kB 00:00 (525/647): python3-rpm-macros-3.11-10.fc39.noar 367 kB/s | 15 kB 00:00 (526/647): python3-setuptools-65.5.1-2.fc38.noa 12 MB/s | 1.7 MB 00:00 (527/647): python3-shiboken2-5.15.7-2.fc38.x86_ 4.7 MB/s | 261 kB 00:00 (528/647): python3-shiboken2-devel-5.15.7-2.fc3 1.3 MB/s | 56 kB 00:00 (529/647): python3-six-1.16.0-9.fc38.noarch.rpm 1.0 MB/s | 42 kB 00:00 (530/647): python3-tkinter-3.11.2-1.fc39.x86_64 7.5 MB/s | 417 kB 00:00 (531/647): python3-scipy-1.10.1-2.fc39.x86_64.r 30 MB/s | 21 MB 00:00 (532/647): python3-vtk-9.2.6-2.fc39.x86_64.rpm 28 MB/s | 10 MB 00:00 (533/647): qt-settings-38.2-2.fc39.noarch.rpm 304 kB/s | 10 kB 00:00 (534/647): qt5-designer-5.15.8-2.fc38.x86_64.rp 3.3 MB/s | 160 kB 00:00 (535/647): qt5-doctools-5.15.8-2.fc38.x86_64.rp 15 MB/s | 697 kB 00:00 (536/647): qt5-qt3d-5.15.8-2.fc38.x86_64.rpm 4.3 MB/s | 2.3 MB 00:00 (537/647): qt5-qtbase-5.15.8-7.fc39.x86_64.rpm 3.2 MB/s | 3.5 MB 00:01 (538/647): qt5-qtbase-common-5.15.8-7.fc39.noar 224 kB/s | 11 kB 00:00 (539/647): qt5-linguist-5.15.8-2.fc38.x86_64.rp 348 kB/s | 884 kB 00:02 (540/647): qt5-qtbase-devel-5.15.8-7.fc39.x86_6 1.8 MB/s | 3.5 MB 00:01 (541/647): qt5-qtcharts-5.15.8-2.fc38.x86_64.rp 355 kB/s | 686 kB 00:01 (542/647): python3-pyside2-5.15.7-2.fc38.x86_64 1.2 MB/s | 9.1 MB 00:07 (543/647): qt5-qtdatavis3d-5.15.8-2.fc38.x86_64 395 kB/s | 556 kB 00:01 (544/647): qt5-qtdeclarative-devel-5.15.8-4.fc3 1.6 MB/s | 1.5 MB 00:00 (545/647): qt5-qtgraphicaleffects-5.15.8-2.fc38 1.1 MB/s | 120 kB 00:00 (546/647): qt5-qtimageformats-5.15.8-2.fc38.x86 1.5 MB/s | 104 kB 00:00 (547/647): qt5-qtbase-gui-5.15.8-7.fc39.x86_64. 884 kB/s | 6.4 MB 00:07 (548/647): qt5-qtlocation-devel-5.15.8-4.fc39.x 1.4 MB/s | 199 kB 00:00 (549/647): qt5-qtlocation-5.15.8-4.fc39.x86_64. 1.4 MB/s | 3.1 MB 00:02 (550/647): qt5-qtdeclarative-5.15.8-4.fc39.x86_ 1.1 MB/s | 4.3 MB 00:03 (551/647): qt5-qtremoteobjects-5.15.8-1.fc38.x8 3.3 MB/s | 374 kB 00:00 (552/647): qt5-qtmultimedia-5.15.8-2.fc38.x86_6 1.9 MB/s | 813 kB 00:00 (553/647): qt5-qtscxml-5.15.8-2.fc38.x86_64.rpm 2.0 MB/s | 287 kB 00:00 (554/647): qt5-qtscript-5.15.8-2.fc38.x86_64.rp 5.4 MB/s | 1.0 MB 00:00 (555/647): qt5-qtserialport-5.15.8-2.fc38.x86_6 1.6 MB/s | 65 kB 00:00 (556/647): qt5-qtsensors-5.15.8-2.fc38.x86_64.r 2.2 MB/s | 229 kB 00:00 (557/647): qt5-qtspeech-5.15.8-2.fc38.x86_64.rp 1.1 MB/s | 44 kB 00:00 (558/647): qt5-qtsvg-devel-5.15.8-2.fc38.x86_64 910 kB/s | 32 kB 00:00 (559/647): qt5-qttools-5.15.8-2.fc38.x86_64.rpm 918 kB/s | 41 kB 00:00 (560/647): qt5-qtsvg-5.15.8-2.fc38.x86_64.rpm 1.8 MB/s | 186 kB 00:00 (561/647): qt5-qttools-common-5.15.8-2.fc38.noa 243 kB/s | 11 kB 00:00 (562/647): qt5-qtquickcontrols2-5.15.8-2.fc38.x 3.0 MB/s | 1.7 MB 00:00 (563/647): qt5-qttools-devel-5.15.8-2.fc38.x86_ 2.2 MB/s | 227 kB 00:00 (564/647): qt5-qttools-libs-help-5.15.8-2.fc38. 1.8 MB/s | 158 kB 00:00 (565/647): qt5-qttools-static-5.15.8-2.fc38.x86 2.0 MB/s | 211 kB 00:00 (566/647): qt5-qttools-libs-designercomponents- 3.3 MB/s | 790 kB 00:00 (567/647): qt5-qtwebchannel-devel-5.15.8-2.fc38 790 kB/s | 27 kB 00:00 (568/647): qt5-qtwebchannel-5.15.8-2.fc38.x86_6 1.7 MB/s | 100 kB 00:00 (569/647): qt5-qttools-libs-designer-5.15.8-2.f 8.5 MB/s | 2.7 MB 00:00 (570/647): qt5-qtwebengine-devel-5.15.12-4.fc39 1.6 MB/s | 116 kB 00:00 (571/647): qt5-qtwebengine-devtools-5.15.12-4.f 5.3 MB/s | 1.9 MB 00:00 (572/647): qt5-qtwebkit-devel-5.212.0-0.74alpha 1.7 MB/s | 71 kB 00:00 (573/647): qt5-qtwebsockets-5.15.8-2.fc38.x86_6 2.1 MB/s | 86 kB 00:00 (574/647): qt5-qtx11extras-5.15.8-2.fc38.x86_64 748 kB/s | 35 kB 00:00 (575/647): qt5-qtx11extras-devel-5.15.8-2.fc38. 326 kB/s | 15 kB 00:00 (576/647): qt5-qtxmlpatterns-5.15.8-2.fc38.x86_ 813 kB/s | 1.0 MB 00:01 (577/647): qt5-qtxmlpatterns-devel-5.15.8-2.fc3 1.4 MB/s | 366 kB 00:00 (578/647): qt5-rpm-macros-5.15.8-2.fc38.noarch. 302 kB/s | 9.8 kB 00:00 (579/647): rav1e-libs-0.5.1-9.fc39.x86_64.rpm 2.1 MB/s | 890 kB 00:00 (580/647): re2-20220601-2.fc38.x86_64.rpm 1.8 MB/s | 197 kB 00:00 (581/647): rhash-1.4.3-2.fc38.x86_64.rpm 1.7 MB/s | 194 kB 00:00 (582/647): rpm-mpi-hooks-8-5.fc38.noarch.rpm 265 kB/s | 11 kB 00:00 (583/647): serd-0.30.16-1.fc38.x86_64.rpm 1.7 MB/s | 62 kB 00:00 (584/647): shared-mime-info-2.2-3.fc38.x86_64.r 2.1 MB/s | 381 kB 00:00 (585/647): shiboken2-5.15.7-2.fc38.x86_64.rpm 9.5 MB/s | 629 kB 00:00 (586/647): snappy-1.1.10-1.fc39.x86_64.rpm 1.0 MB/s | 37 kB 00:00 (587/647): sord-0.16.14-1.fc38.x86_64.rpm 421 kB/s | 39 kB 00:00 (588/647): soundtouch-2.3.1-4.fc38.x86_64.rpm 1.2 MB/s | 94 kB 00:00 (589/647): sqlite-3.40.1-2.fc38.x86_64.rpm 16 MB/s | 813 kB 00:00 (590/647): sqlite-devel-3.40.1-2.fc38.x86_64.rp 4.1 MB/s | 144 kB 00:00 (591/647): sratom-0.6.10-3.fc38.x86_64.rpm 480 kB/s | 26 kB 00:00 (592/647): svt-av1-libs-1.4.1-2.fc38.x86_64.rpm 14 MB/s | 2.0 MB 00:00 (593/647): swig-4.1.1-4.fc38.x86_64.rpm 16 MB/s | 1.6 MB 00:00 (594/647): sysprof-capture-devel-3.48.0-1.fc39. 1.6 MB/s | 58 kB 00:00 (595/647): tbb-2020.3-16.fc39.x86_64.rpm 3.2 MB/s | 170 kB 00:00 (596/647): tbb-devel-2020.3-16.fc39.x86_64.rpm 8.7 MB/s | 335 kB 00:00 (597/647): tcl-8.6.12-4.fc38.x86_64.rpm 15 MB/s | 1.1 MB 00:00 (598/647): tcl-devel-8.6.12-4.fc38.x86_64.rpm 4.1 MB/s | 169 kB 00:00 (599/647): tk-8.6.12-4.fc38.x86_64.rpm 16 MB/s | 1.6 MB 00:00 (600/647): tk-devel-8.6.12-4.fc38.x86_64.rpm 12 MB/s | 538 kB 00:00 (601/647): ttmkfdir-3.0.9-67.fc38.x86_64.rpm 1.7 MB/s | 54 kB 00:00 (602/647): tzdata-java-2022g-2.fc38.noarch.rpm 5.1 MB/s | 208 kB 00:00 (603/647): unixODBC-2.3.11-2.fc38.x86_64.rpm 11 MB/s | 483 kB 00:00 (604/647): qt5-qtwebengine-5.15.12-4.fc39.x86_6 13 MB/s | 53 MB 00:04 (605/647): uriparser-0.9.7-2.fc38.x86_64.rpm 780 kB/s | 60 kB 00:00 (606/647): urw-base35-bookman-fonts-20200910-16 14 MB/s | 848 kB 00:00 (607/647): urw-base35-c059-fonts-20200910-16.fc 11 MB/s | 875 kB 00:00 (608/647): urw-base35-d050000l-fonts-20200910-1 2.3 MB/s | 76 kB 00:00 (609/647): urw-base35-fonts-20200910-16.fc38.no 232 kB/s | 11 kB 00:00 (610/647): urw-base35-fonts-common-20200910-16. 464 kB/s | 21 kB 00:00 (611/647): urw-base35-gothic-fonts-20200910-16. 14 MB/s | 643 kB 00:00 (612/647): urw-base35-nimbus-mono-ps-fonts-2020 15 MB/s | 796 kB 00:00 (613/647): urw-base35-nimbus-roman-fonts-202009 13 MB/s | 857 kB 00:00 (614/647): urw-base35-nimbus-sans-fonts-2020091 18 MB/s | 1.3 MB 00:00 (615/647): urw-base35-p052-fonts-20200910-16.fc 13 MB/s | 974 kB 00:00 (616/647): urw-base35-standard-symbols-ps-fonts 930 kB/s | 42 kB 00:00 (617/647): urw-base35-z003-fonts-20200910-16.fc 5.8 MB/s | 276 kB 00:00 (618/647): utf8cpp-devel-3.2.3-2.fc38.noarch.rp 755 kB/s | 28 kB 00:00 (619/647): vim-filesystem-9.0.1407-1.fc39.noarc 439 kB/s | 18 kB 00:00 (620/647): vtk-9.2.6-2.fc39.x86_64.rpm 34 MB/s | 24 MB 00:00 (621/647): vtk-java-9.2.6-2.fc39.x86_64.rpm 25 MB/s | 6.4 MB 00:00 (622/647): vtk-qt-9.2.6-2.fc39.x86_64.rpm 6.5 MB/s | 289 kB 00:00 (623/647): vulkan-headers-1.3.239.0-2.fc38.noar 16 MB/s | 1.0 MB 00:00 (624/647): vulkan-loader-1.3.239.0-1.fc38.x86_6 4.7 MB/s | 141 kB 00:00 (625/647): vulkan-loader-devel-1.3.239.0-1.fc38 259 kB/s | 9.1 kB 00:00 (626/647): webrtc-audio-processing-0.3.1-10.fc3 5.8 MB/s | 307 kB 00:00 (627/647): woff2-1.0.2-17.fc38.x86_64.rpm 1.6 MB/s | 61 kB 00:00 (628/647): xapian-core-libs-1.4.20-3.fc39.x86_6 15 MB/s | 757 kB 00:00 (629/647): xcb-util-0.4.1-2.fc38.x86_64.rpm 521 kB/s | 19 kB 00:00 (630/647): xcb-util-image-0.4.1-2.fc38.x86_64.r 571 kB/s | 19 kB 00:00 (631/647): xcb-util-keysyms-0.4.1-2.fc38.x86_64 352 kB/s | 14 kB 00:00 (632/647): xcb-util-renderutil-0.3.10-2.fc38.x8 510 kB/s | 17 kB 00:00 (633/647): xcb-util-wm-0.4.2-2.fc38.x86_64.rpm 890 kB/s | 31 kB 00:00 (634/647): qt5-qtwebkit-5.212.0-0.74alpha4.fc39 2.2 MB/s | 13 MB 00:05 (635/647): xerces-c-3.2.3-8.fc38.x86_64.rpm 15 MB/s | 963 kB 00:00 (636/647): xkeyboard-config-2.38-1.fc38.noarch. 14 MB/s | 963 kB 00:00 (637/647): xerces-c-devel-3.2.3-8.fc38.x86_64.r 3.7 MB/s | 509 kB 00:00 (638/647): xml-common-0.6.3-60.fc38.noarch.rpm 750 kB/s | 31 kB 00:00 (639/647): xorg-x11-fonts-Type1-7.5-35.fc38.noa 11 MB/s | 505 kB 00:00 (640/647): xorg-x11-proto-devel-2022.2-3.fc38.n 6.3 MB/s | 299 kB 00:00 (641/647): xprop-1.2.5-3.fc38.x86_64.rpm 1.0 MB/s | 35 kB 00:00 (642/647): xz-devel-5.4.1-1.fc38.x86_64.rpm 1.5 MB/s | 65 kB 00:00 (643/647): xorg-x11-fonts-ISO8859-1-100dpi-7.5- 5.0 MB/s | 1.1 MB 00:00 (644/647): zipios++-0.1.5.9-30.fc38.x86_64.rpm 1.6 MB/s | 76 kB 00:00 (645/647): zlib-devel-1.2.13-3.fc38.x86_64.rpm 1.4 MB/s | 45 kB 00:00 (646/647): vtk-devel-9.2.6-2.fc39.x86_64.rpm 33 MB/s | 68 MB 00:02 (647/647): zipios++-devel-0.1.5.9-30.fc38.x86_6 5.9 MB/s | 7.7 MB 00:01 -------------------------------------------------------------------------------- Total 13 MB/s | 752 MB 00:57 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Running scriptlet: copy-jdk-configs-4.1-2.fc38.noarch 1/1 Running scriptlet: java-17-openjdk-headless-1:17.0.6.0.10-4.fc39.x86_64 1/1 Preparing : 1/1 Installing : cmake-filesystem-3.26.0-1.fc39.x86_64 1/647 Installing : xorg-x11-proto-devel-2022.2-3.fc38.noarch 2/647 Installing : libjpeg-turbo-2.1.4-2.fc38.x86_64 3/647 Installing : libpng-2:1.6.37-14.fc38.x86_64 4/647 Installing : libgfortran-13.0.1-0.8.fc39.x86_64 5/647 Installing : expat-2.5.0-2.fc38.x86_64 6/647 Installing : zlib-devel-1.2.13-3.fc38.x86_64 7/647 Installing : libicu-72.1-2.fc38.x86_64 8/647 Installing : libwebp-1.3.0-2.fc38.x86_64 9/647 Installing : lcms2-2.15-1.fc39.x86_64 10/647 Installing : nspr-4.35.0-5.fc39.x86_64 11/647 Installing : boost-system-1.81.0-1.fc39.x86_64 12/647 Installing : libogg-2:1.3.5-5.fc38.x86_64 13/647 Installing : libX11-xcb-1.8.4-1.fc38.x86_64 14/647 Installing : boost-chrono-1.81.0-1.fc39.x86_64 15/647 Installing : tcl-1:8.6.12-4.fc38.x86_64 16/647 Installing : openjpeg2-2.5.0-3.fc38.x86_64 17/647 Installing : libwayland-client-1.21.0-2.fc38.x86_64 18/647 Installing : dbus-libs-1:1.14.6-1.fc38.x86_64 19/647 Installing : boost-thread-1.81.0-1.fc39.x86_64 20/647 Installing : nss-util-3.88.1-2.fc39.x86_64 21/647 Installing : qt5-qttools-common-5.15.8-2.fc38.noarch 22/647 Installing : libglvnd-1:1.6.0-2.fc38.x86_64 23/647 Installing : libglvnd-opengl-1:1.6.0-2.fc38.x86_64 24/647 Installing : libaec-1.0.6-4.fc38.x86_64 25/647 Installing : hdf5-1.12.1-11.fc38.x86_64 26/647 Installing : fonts-filesystem-1:2.0.5-11.fc38.noarch 27/647 Installing : urw-base35-fonts-common-20200910-16.fc38.noarch 28/647 Installing : flexiblas-3.3.0-2.fc38.x86_64 29/647 Installing : opus-1.3.1-12.fc39.x86_64 30/647 Installing : libunistring-1.1-3.fc38.x86_64 31/647 Installing : libstdc++-devel-13.0.1-0.8.fc39.x86_64 32/647 Installing : libquadmath-13.0.1-0.8.fc39.x86_64 33/647 Installing : libmpc-1.3.1-2.fc38.x86_64 34/647 Installing : libICE-1.0.10-10.fc38.x86_64 35/647 Installing : alsa-lib-1.2.8-3.fc38.x86_64 36/647 Installing : libICE-devel-1.0.10-10.fc38.x86_64 37/647 Installing : libSM-1.2.3-12.fc38.x86_64 38/647 Installing : Coin4-4.0.0-12.fc38.x86_64 39/647 Installing : libtheora-1:1.1.1-33.fc38.x86_64 40/647 Installing : boost-regex-1.81.0-1.fc39.x86_64 41/647 Installing : hdf-libs-4.2.15-12.fc38.x86_64 42/647 Installing : tbb-2020.3-16.fc39.x86_64 43/647 Installing : opencascade-foundation-7.6.3-3.fc38.x86_64 44/647 Installing : serd-0.30.16-1.fc38.x86_64 45/647 Installing : python-rpm-macros-3.11-10.fc39.noarch 46/647 Installing : mesa-libglapi-23.0.0-1.fc39.x86_64 47/647 Installing : lua-5.4.4-9.fc39.x86_64 48/647 Installing : libxslt-1.1.37-3.fc39.x86_64 49/647 Installing : libtool-ltdl-2.4.7-6.fc38.x86_64 50/647 Installing : libcurl-devel-8.0.1-1.fc39.x86_64 51/647 Installing : jsoncpp-1.9.5-4.fc38.x86_64 52/647 Installing : imath-3.1.6-3.fc39.x86_64 53/647 Installing : geos-3.11.2-1.fc39.x86_64 54/647 Installing : fribidi-1.0.12-4.fc39.x86_64 55/647 Installing : emacs-filesystem-1:28.2-4.fc38.noarch 56/647 Installing : double-conversion-3.1.5-8.fc38.x86_64 57/647 Installing : boost-context-1.81.0-1.fc39.x86_64 58/647 Installing : boost-atomic-1.81.0-1.fc39.x86_64 59/647 Installing : boost-filesystem-1.81.0-1.fc39.x86_64 60/647 Installing : openexr-libs-3.1.6-1.fc39.x86_64 61/647 Installing : python3-rpm-macros-3.11-10.fc39.noarch 62/647 Installing : libSM-devel-1.2.3-12.fc38.x86_64 63/647 Installing : gettext-libs-0.21.1-2.fc38.x86_64 64/647 Installing : cgnslib-libs-4.3.0-7.fc38.x86_64 65/647 Installing : libaec-devel-1.0.6-4.fc38.x86_64 66/647 Installing : libwayland-cursor-1.21.0-2.fc38.x86_64 67/647 Installing : tcl-devel-1:8.6.12-4.fc38.x86_64 68/647 Installing : libvorbis-1:1.3.7-7.fc38.x86_64 69/647 Installing : libicu-devel-72.1-2.fc38.x86_64 70/647 Installing : libpng-devel-2:1.6.37-14.fc38.x86_64 71/647 Installing : blas-3.11.0-2.fc38.x86_64 72/647 Installing : blas64-3.11.0-2.fc38.x86_64 73/647 Installing : blas64_-3.11.0-2.fc38.x86_64 74/647 Installing : libharu-2.4.3-2.fc38.x86_64 75/647 Installing : jasper-libs-3.0.6-2.fc38.x86_64 76/647 Installing : python3-matplotlib-data-fonts-3.7.1-1.fc39.noarc 77/647 Installing : python3-matplotlib-data-3.7.1-1.fc39.noarch 78/647 Running scriptlet: xml-common-0.6.3-60.fc38.noarch 79/647 Installing : xml-common-0.6.3-60.fc38.noarch 79/647 Installing : xerces-c-3.2.3-8.fc38.x86_64 80/647 Installing : vulkan-loader-1.3.239.0-1.fc38.x86_64 81/647 Installing : snappy-1.1.10-1.fc39.x86_64 82/647 Installing : blosc-1.21.2-2.fc38.x86_64 83/647 Installing : netcdf-4.9.2-1.fc39.x86_64 84/647 Installing : pugixml-1.13-2.fc38.x86_64 85/647 Installing : pcre2-utf16-10.42-1.fc38.1.x86_64 86/647 Installing : orc-0.4.33-2.fc38.x86_64 87/647 Installing : openssl-devel-1:3.0.8-1.fc39.x86_64 88/647 Installing : openblas-0.3.21-4.fc38.x86_64 89/647 Installing : nettle-3.8-3.fc38.x86_64 90/647 Installing : gnutls-3.8.0-3.fc39.x86_64 91/647 Installing : glib2-2.76.0-1.fc39.x86_64 92/647 Installing : json-glib-1.6.6-4.fc38.x86_64 93/647 Installing : libgudev-237-4.fc38.x86_64 94/647 Installing : libsoup3-3.4.0-2.fc39.x86_64 95/647 Installing : gssdp-1.6.2-2.fc38.x86_64 96/647 Installing : shared-mime-info-2.2-3.fc38.x86_64 97/647 Running scriptlet: shared-mime-info-2.2-3.fc38.x86_64 97/647 Installing : gdk-pixbuf2-2.42.10-2.fc38.x86_64 98/647 Installing : lua-posix-36.1-1.fc39.x86_64 99/647 Installing : libxshmfence-1.3-12.fc38.x86_64 100/647 Installing : libwayland-server-1.21.0-2.fc38.x86_64 101/647 Installing : libwayland-egl-1.21.0-2.fc38.x86_64 102/647 Installing : libusb1-1.0.26-2.fc38.x86_64 103/647 Installing : libstemmer-2.2.0-5.fc38.x86_64 104/647 Installing : libqhull_r-1:7.2.1-12.fc38.x86_64 105/647 Installing : libpq-15.0-3.fc38.x86_64 106/647 Installing : libimagequant-4.0.1-4.fc39.x86_64 107/647 Installing : libdvdread-6.1.3-3.fc38.x86_64 108/647 Installing : libXau-1.0.11-2.fc38.x86_64 109/647 Installing : libxcb-1.13.1-11.fc38.x86_64 110/647 Installing : kernel-headers-6.3.0-0.rc3.git0.1.fc39.x86_64 111/647 Installing : gsm-1.0.22-2.fc38.x86_64 112/647 Installing : graphite2-1.3.14-11.fc38.x86_64 113/647 Installing : gl-manpages-1.1-26.20190306.fc38.noarch 114/647 Installing : freexl-1.0.6-21.fc38.x86_64 115/647 Installing : bzip2-devel-1.0.8-13.fc38.x86_64 116/647 Installing : boost-date-time-1.81.0-1.fc39.x86_64 117/647 Installing : boost-container-1.81.0-1.fc39.x86_64 118/647 Installing : adobe-mappings-cmap-20230118-1.fc38.noarch 119/647 Installing : adobe-mappings-cmap-deprecated-20230118-1.fc38.n 120/647 Installing : boost-json-1.81.0-1.fc39.x86_64 121/647 Installing : boost-wave-1.81.0-1.fc39.x86_64 122/647 Installing : graphite2-devel-1.3.14-11.fc38.x86_64 123/647 Installing : xcb-util-0.4.1-2.fc38.x86_64 124/647 Installing : xcb-util-image-0.4.1-2.fc38.x86_64 125/647 Installing : xcb-util-keysyms-0.4.1-2.fc38.x86_64 126/647 Installing : xcb-util-renderutil-0.3.10-2.fc38.x86_64 127/647 Installing : xcb-util-wm-0.4.2-2.fc38.x86_64 128/647 Installing : libXau-devel-1.0.11-2.fc38.x86_64 129/647 Installing : libxcb-devel-1.13.1-11.fc38.x86_64 130/647 Installing : libdvdnav-6.1.1-5.fc38.x86_64 131/647 Installing : libpq-devel-15.0-3.fc38.x86_64 132/647 Installing : libtracker-sparql-3.5.0-1.fc39.x86_64 133/647 Installing : libgusb-0.4.5-1.fc38.x86_64 134/647 Installing : colord-libs-1.4.6-2.fc37.x86_64 135/647 Installing : copy-jdk-configs-4.1-2.fc38.noarch 136/647 Installing : gtk-update-icon-cache-3.24.37-1.fc39.x86_64 137/647 Installing : graphene-1.10.6-5.fc38.x86_64 138/647 Installing : libcloudproviders-0.3.1-7.fc38.x86_64 139/647 Installing : openblas-openmp-0.3.21-4.fc38.x86_64 140/647 Installing : flexiblas-netlib-3.3.0-2.fc38.x86_64 141/647 Installing : flexiblas-openblas-openmp-3.3.0-2.fc38.x86_64 142/647 Installing : SuperLU-5.3.0-5.fc39.x86_64 143/647 Installing : openblas-openmp64-0.3.21-4.fc38.x86_64 144/647 Installing : flexiblas-netlib64-3.3.0-2.fc38.x86_64 145/647 Installing : flexiblas-openblas-openmp64-3.3.0-2.fc38.x86_64 146/647 Installing : arpack-3.8.0-6.fc38.x86_64 147/647 Installing : armadillo-10.8.2-3.fc38.x86_64 148/647 Installing : flexiblas-devel-3.3.0-2.fc38.x86_64 149/647 Installing : pugixml-devel-1.13-2.fc38.x86_64 150/647 Installing : netcdf-cxx-4.2-31.fc38.x86_64 151/647 Running scriptlet: netcdf-cxx-4.2-31.fc38.x86_64 151/647 Installing : iso-codes-4.13.0-1.fc39.noarch 152/647 Installing : LibRaw-0.21.1-3.fc39.x86_64 153/647 Installing : libharu-devel-2.4.3-2.fc38.x86_64 154/647 Installing : lapack64_-3.11.0-2.fc38.x86_64 155/647 Installing : lapack64-3.11.0-2.fc38.x86_64 156/647 Installing : lapack-3.11.0-2.fc38.x86_64 157/647 Installing : pyproject-rpm-macros-1.6.3-1.fc39.noarch 158/647 Installing : boost-fiber-1.81.0-1.fc39.x86_64 159/647 Installing : boost-log-1.81.0-1.fc39.x86_64 160/647 Installing : boost-coroutine-1.81.0-1.fc39.x86_64 161/647 Installing : double-conversion-devel-3.1.5-8.fc38.x86_64 162/647 Installing : librttopo-1.1.0-11.fc38.x86_64 163/647 Installing : jsoncpp-devel-1.9.5-4.fc38.x86_64 164/647 Installing : unixODBC-2.3.11-2.fc38.x86_64 165/647 Installing : lua-term-0.07-17.fc38.x86_64 166/647 Installing : tbb-devel-2020.3-16.fc39.x86_64 167/647 Installing : boost-graph-1.81.0-1.fc39.x86_64 168/647 Installing : cpp-13.0.1-0.8.fc39.x86_64 169/647 Installing : PEGTL-devel-2.8.3-6.fc38.x86_64 170/647 Installing : json-devel-3.11.2-2.fc39.x86_64 171/647 Installing : urw-base35-bookman-fonts-20200910-16.fc38.noarch 172/647 Running scriptlet: urw-base35-bookman-fonts-20200910-16.fc38.noarch 172/647 Installing : urw-base35-c059-fonts-20200910-16.fc38.noarch 173/647 Running scriptlet: urw-base35-c059-fonts-20200910-16.fc38.noarch 173/647 Installing : urw-base35-d050000l-fonts-20200910-16.fc38.noarc 174/647 Running scriptlet: urw-base35-d050000l-fonts-20200910-16.fc38.noarc 174/647 Installing : urw-base35-gothic-fonts-20200910-16.fc38.noarch 175/647 Running scriptlet: urw-base35-gothic-fonts-20200910-16.fc38.noarch 175/647 Installing : urw-base35-nimbus-mono-ps-fonts-20200910-16.fc38 176/647 Running scriptlet: urw-base35-nimbus-mono-ps-fonts-20200910-16.fc38 176/647 Installing : urw-base35-nimbus-roman-fonts-20200910-16.fc38.n 177/647 Running scriptlet: urw-base35-nimbus-roman-fonts-20200910-16.fc38.n 177/647 Installing : urw-base35-nimbus-sans-fonts-20200910-16.fc38.no 178/647 Running scriptlet: urw-base35-nimbus-sans-fonts-20200910-16.fc38.no 178/647 Installing : urw-base35-p052-fonts-20200910-16.fc38.noarch 179/647 Running scriptlet: urw-base35-p052-fonts-20200910-16.fc38.noarch 179/647 Installing : urw-base35-standard-symbols-ps-fonts-20200910-16 180/647 Running scriptlet: urw-base35-standard-symbols-ps-fonts-20200910-16 180/647 Installing : urw-base35-z003-fonts-20200910-16.fc38.noarch 181/647 Running scriptlet: urw-base35-z003-fonts-20200910-16.fc38.noarch 181/647 Installing : urw-base35-fonts-20200910-16.fc38.noarch 182/647 Installing : dejavu-sans-fonts-2.37-20.fc38.noarch 183/647 Installing : med-4.1.0-11.fc38.x86_64 184/647 Installing : nss-softokn-freebl-3.88.1-2.fc39.x86_64 185/647 Installing : nss-softokn-3.88.1-2.fc39.x86_64 186/647 Installing : boost-locale-1.81.0-1.fc39.x86_64 187/647 Installing : boost-type_erasure-1.81.0-1.fc39.x86_64 188/647 Installing : avahi-libs-0.8-20.fc38.x86_64 189/647 Installing : cups-libs-1:2.4.2-10.fc39.x86_64 190/647 Installing : boost-timer-1.81.0-1.fc39.x86_64 191/647 Installing : flac-libs-1.4.2-2.fc38.x86_64 192/647 Installing : libmng-2.0.3-18.fc39.x86_64 193/647 Installing : expat-devel-2.5.0-2.fc38.x86_64 194/647 Installing : ogdi-4.1.0-10.fc38.x86_64 195/647 Installing : libjpeg-turbo-devel-2.1.4-2.fc38.x86_64 196/647 Installing : cli11-devel-2.3.2-3.fc39.noarch 197/647 Installing : eigen3-devel-3.4.0-9.fc38.noarch 198/647 Installing : uriparser-0.9.7-2.fc38.x86_64 199/647 Installing : libkml-1.3.0-43.fc38.x86_64 200/647 Installing : utf8cpp-devel-3.2.3-2.fc38.noarch 201/647 Installing : zipios++-0.1.5.9-30.fc38.x86_64 202/647 Installing : xz-devel-5.4.1-1.fc38.x86_64 203/647 Installing : libxml2-devel-2.10.3-3.fc38.x86_64 204/647 Installing : xkeyboard-config-2.38-1.fc38.noarch 205/647 Installing : libxkbcommon-1.5.0-2.fc38.x86_64 206/647 Installing : libxkbcommon-x11-1.5.0-2.fc38.x86_64 207/647 Installing : xapian-core-libs-1.4.20-3.fc39.x86_64 208/647 Installing : woff2-1.0.2-17.fc38.x86_64 209/647 Installing : webrtc-audio-processing-0.3.1-10.fc38.x86_64 210/647 Installing : vim-filesystem-2:9.0.1407-1.fc39.noarch 211/647 Installing : tzdata-java-2022g-2.fc38.noarch 212/647 Installing : sysprof-capture-devel-3.48.0-1.fc39.x86_64 213/647 Installing : svt-av1-libs-1.4.1-2.fc38.x86_64 214/647 Installing : sqlite-3.40.1-2.fc38.x86_64 215/647 Installing : sqlite-devel-3.40.1-2.fc38.x86_64 216/647 Installing : soundtouch-2.3.1-4.fc38.x86_64 217/647 Installing : rhash-1.4.3-2.fc38.x86_64 218/647 Installing : re2-1:20220601-2.fc38.x86_64 219/647 Installing : rav1e-libs-0.5.1-9.fc39.x86_64 220/647 Installing : qt-settings-38.2-2.fc39.noarch 221/647 Installing : python-setuptools-wheel-65.5.1-2.fc38.noarch 222/647 Installing : python-pip-wheel-23.0.1-1.fc39.noarch 223/647 Installing : proj-data-9.2.0-1.fc39.noarch 224/647 Installing : procps-ng-3.3.17-9.fc38.x86_64 225/647 Installing : poppler-data-0.4.11-4.fc38.noarch 226/647 Installing : poly2tri-0.0-26.20130501hg26242d0aa7b8.fc38.x86_ 227/647 Installing : pixman-0.42.2-1.fc39.x86_64 228/647 Installing : pcre2-utf32-10.42-1.fc38.1.x86_64 229/647 Installing : pcre2-devel-10.42-1.fc38.1.x86_64 230/647 Installing : pcre-8.45-1.fc38.3.x86_64 231/647 Installing : sord-0.16.14-1.fc38.x86_64 232/647 Installing : sratom-0.6.10-3.fc38.x86_64 233/647 Installing : lilv-libs-0.24.14-4.fc38.x86_64 234/647 Installing : pciutils-libs-3.9.0-3.fc38.x86_64 235/647 Installing : openal-soft-1.23.0-1.fc38.x86_64 236/647 Installing : netpbm-11.01.00-2.fc38.x86_64 237/647 Installing : gts-0.7.6-44.20121130.fc38.x86_64 238/647 Installing : ncurses-6.4-3.20230114.fc38.x86_64 239/647 Installing : mtdev-1.1.6-5.fc38.x86_64 240/647 Installing : mpg123-libs-1.31.3-1.fc39.x86_64 241/647 Installing : mpdecimal-2.5.1-6.fc38.x86_64 242/647 Installing : minizip-ng-3.0.7-3.fc38.x86_64 243/647 Installing : mesa-filesystem-23.0.0-1.fc39.x86_64 244/647 Installing : mariadb-connector-c-config-3.2.7-3.fc38.noarch 245/647 Installing : mariadb-connector-c-3.2.7-3.fc38.x86_64 246/647 Installing : mariadb-connector-c-devel-3.2.7-3.fc38.x86_64 247/647 Installing : m4-1.4.19-4.fc37.x86_64 248/647 Installing : lz4-devel-1.9.4-2.fc38.x86_64 249/647 Installing : lua-lpeg-1.0.2-10.fc38.x86_64 250/647 Installing : lua-json-1.3.4-3.fc38.noarch 251/647 Installing : lua-filesystem-1.8.0-8.fc38.x86_64 252/647 Installing : Lmod-8.7.20-1.fc39.x86_64 253/647 Running scriptlet: Lmod-8.7.20-1.fc39.x86_64 253/647 Installing : rpm-mpi-hooks-8-5.fc38.noarch 254/647 Installing : lksctp-tools-1.0.19-3.fc38.x86_64 255/647 Installing : libwacom-data-2.6.0-1.fc38.noarch 256/647 Installing : libvpx-1.13.0-2.fc39.x86_64 257/647 Installing : libvmaf-2.3.0-5.fc38.x86_64 258/647 Installing : libvisual-1:0.4.0-38.fc38.x86_64 259/647 Installing : libuv-1:1.44.2-3.fc38.x86_64 260/647 Installing : libunwind-1.7.0-0.1.rc2.fc39.x86_64 261/647 Installing : libsepol-devel-3.5-1.fc39.x86_64 262/647 Installing : libselinux-devel-3.5-1.fc39.x86_64 263/647 Installing : libproxy-0.4.18-5.fc38.x86_64 264/647 Installing : qt5-qtbase-common-5.15.8-7.fc39.noarch 265/647 Running scriptlet: qt5-qtbase-5.15.8-7.fc39.x86_64 266/647 Installing : qt5-qtbase-5.15.8-7.fc39.x86_64 266/647 Running scriptlet: qt5-qtbase-5.15.8-7.fc39.x86_64 266/647 Installing : qt5-qtserialport-5.15.8-2.fc38.x86_64 267/647 Installing : qt5-qtspeech-5.15.8-2.fc38.x86_64 268/647 Installing : qt5-qttools-5.15.8-2.fc38.x86_64 269/647 Installing : qt5-qtwebsockets-5.15.8-2.fc38.x86_64 270/647 Installing : libpaper-1:2.0.10-1.fc39.x86_64 271/647 Installing : liblerc-4.0.0-3.fc38.x86_64 272/647 Installing : libijs-0.35-17.fc38.x86_64 273/647 Installing : libgta-1.2.1-9.fc38.x86_64 274/647 Installing : libglvnd-core-devel-1:1.6.0-2.fc38.x86_64 275/647 Installing : libfontenc-1.1.6-2.fc38.x86_64 276/647 Installing : libffi-devel-3.4.4-2.fc38.x86_64 277/647 Installing : libevdev-1.13.0-2.fc38.x86_64 278/647 Installing : libepoxy-1.5.10-3.fc38.x86_64 279/647 Installing : libedit-3.1-45.20221030cvs.fc38.x86_64 280/647 Installing : llvm-libs-15.0.7-2.fc38.x86_64 281/647 Installing : libdav1d-1.1.0-1.fc39.x86_64 282/647 Installing : libdatrie-0.2.13-5.fc38.x86_64 283/647 Installing : libthai-0.1.29-4.fc38.x86_64 284/647 Installing : libblkid-devel-2.38.1-4.fc38.x86_64 285/647 Installing : libmount-devel-2.38.1-4.fc38.x86_64 286/647 Installing : libb2-0.98.1-8.fc38.x86_64 287/647 Installing : libasyncns-0.8-24.fc38.x86_64 288/647 Installing : libarchive-devel-3.6.1-5.fc39.x86_64 289/647 Installing : libXdmcp-1.1.3-10.fc38.x86_64 290/647 Installing : libXdmcp-devel-1.1.3-10.fc38.x86_64 291/647 Installing : libX11-common-1.8.4-1.fc38.noarch 292/647 Installing : libX11-1.8.4-1.fc38.x86_64 293/647 Installing : libX11-devel-1.8.4-1.fc38.x86_64 294/647 Installing : libXext-1.3.5-2.fc38.x86_64 295/647 Installing : libXext-devel-1.3.5-2.fc38.x86_64 296/647 Installing : libXrender-0.9.11-2.fc38.x86_64 297/647 Installing : libXi-1.8-4.fc38.x86_64 298/647 Installing : libXfixes-6.0.0-5.fc38.x86_64 299/647 Installing : libXtst-1.2.4-2.fc38.x86_64 300/647 Installing : libXcomposite-0.4.5-9.fc38.x86_64 301/647 Installing : libXcursor-1.2.1-3.fc38.x86_64 302/647 Installing : libXfixes-devel-6.0.0-5.fc38.x86_64 303/647 Installing : libXrandr-1.5.2-10.fc38.x86_64 304/647 Installing : libXrender-devel-0.9.11-2.fc38.x86_64 305/647 Installing : libXt-1.2.1-4.fc38.x86_64 306/647 Installing : libXmu-1.1.4-2.fc38.x86_64 307/647 Installing : libXt-devel-1.2.1-4.fc38.x86_64 308/647 Installing : libXcursor-devel-1.2.1-3.fc38.x86_64 309/647 Installing : libXi-devel-1.8-4.fc38.x86_64 310/647 Installing : libXdamage-1.1.5-9.fc38.x86_64 311/647 Installing : libXinerama-1.1.5-2.fc38.x86_64 312/647 Installing : libXv-1.0.11-18.fc38.x86_64 313/647 Installing : libXpm-3.5.15-3.fc38.x86_64 314/647 Installing : libXpm-devel-3.5.15-3.fc38.x86_64 315/647 Installing : libXv-devel-1.0.11-18.fc38.x86_64 316/647 Installing : libXinerama-devel-1.1.5-2.fc38.x86_64 317/647 Installing : libXtst-devel-1.2.4-2.fc38.x86_64 318/647 Installing : libXrandr-devel-1.5.2-10.fc38.x86_64 319/647 Installing : libXcomposite-devel-0.4.5-9.fc38.x86_64 320/647 Installing : libXScrnSaver-1.2.3-12.fc38.x86_64 321/647 Installing : libXScrnSaver-devel-1.2.3-12.fc38.x86_64 322/647 Installing : libXres-1.2.1-4.fc38.x86_64 323/647 Installing : libXres-devel-1.2.1-4.fc38.x86_64 324/647 Installing : libXxf86vm-1.1.5-2.fc38.x86_64 325/647 Installing : libspnav-1.0-3.fc38.x86_64 326/647 Installing : libxkbfile-1.1.1-2.fc38.x86_64 327/647 Installing : libxkbfile-devel-1.1.1-2.fc38.x86_64 328/647 Installing : xprop-1.2.5-3.fc38.x86_64 329/647 Installing : lame-libs-3.100-14.fc38.x86_64 330/647 Installing : libsndfile-1.1.0-6.fc38.x86_64 331/647 Installing : pulseaudio-libs-16.1-4.fc38.x86_64 332/647 Installing : jxrlib-1.1-24.fc38.x86_64 333/647 Installing : json-c-0.16-4.fc38.x86_64 334/647 Installing : jbigkit-libs-2.1-25.fc38.x86_64 335/647 Installing : libtiff-4.4.0-5.fc38.x86_64 336/647 Installing : proj-9.2.0-1.fc39.x86_64 337/647 Installing : gdk-pixbuf2-modules-2.42.10-2.fc38.x86_64 338/647 Installing : libtiff-devel-4.4.0-5.fc38.x86_64 339/647 Installing : proj-devel-9.2.0-1.fc39.x86_64 340/647 Installing : libgeotiff-1.7.1-7.fc39.x86_64 341/647 Installing : libspatialite-5.0.1-21.fc39.x86_64 342/647 Installing : freeimage-3.19.0-0.13.svn1889.fc38.x86_64 343/647 Installing : freeimage-devel-3.19.0-0.13.svn1889.fc38.x86_64 344/647 Installing : jbig2dec-libs-0.19-8.fc38.x86_64 345/647 Installing : javapackages-filesystem-6.1.0-8.fc39.noarch 346/647 Installing : irrXML-1.8.5-4.fc38.x86_64 347/647 Installing : assimp-5.0.1-10.fc38.x86_64 348/647 Installing : hyphen-2.8.8-20.fc39.x86_64 349/647 Installing : hwloc-libs-2.9.0-6.fc39.x86_64 350/647 Installing : hwdata-0.368-1.fc39.noarch 351/647 Installing : libpciaccess-0.16-8.fc38.x86_64 352/647 Installing : libdrm-2.4.114-2.fc38.x86_64 353/647 Installing : mesa-libgbm-23.0.0-1.fc39.x86_64 354/647 Installing : libglvnd-egl-1:1.6.0-2.fc38.x86_64 355/647 Installing : mesa-libEGL-23.0.0-1.fc39.x86_64 356/647 Installing : libglvnd-glx-1:1.6.0-2.fc38.x86_64 357/647 Installing : mesa-libGL-23.0.0-1.fc39.x86_64 358/647 Installing : libGLEW-2.2.0-4.fc38.x86_64 359/647 Installing : mesa-libGLU-9.0.1-8.fc38.x86_64 360/647 Installing : gl2ps-1.4.2-7.fc38.x86_64 361/647 Installing : glx-utils-8.5.0-1.fc38.x86_64 362/647 Installing : libva-2.17.0-2.fc38.x86_64 363/647 Installing : libglvnd-gles-1:1.6.0-2.fc38.x86_64 364/647 Installing : libglvnd-devel-1:1.6.0-2.fc38.x86_64 365/647 Installing : mesa-libGLU-devel-9.0.1-8.fc38.x86_64 366/647 Installing : glew-devel-2.2.0-4.fc38.x86_64 367/647 Installing : mesa-libEGL-devel-23.0.0-1.fc39.x86_64 368/647 Installing : libpciaccess-devel-0.16-8.fc38.x86_64 369/647 Installing : libdrm-devel-2.4.114-2.fc38.x86_64 370/647 Installing : mesa-libGL-devel-23.0.0-1.fc39.x86_64 371/647 Installing : gl2ps-devel-1.4.2-7.fc38.x86_64 372/647 Installing : highway-1.0.4-1.fc39.x86_64 373/647 Installing : libjxl-1:0.7.0-6.fc38.x86_64 374/647 Installing : libaom-3.6.0-1.fc39.x86_64 375/647 Installing : libavif-0.11.1-9.fc39.x86_64 376/647 Installing : hicolor-icon-theme-0.17-15.fc38.noarch 377/647 Running scriptlet: groff-base-1.22.4-11.fc38.x86_64 378/647 Installing : groff-base-1.22.4-11.fc38.x86_64 378/647 Running scriptlet: groff-base-1.22.4-11.fc38.x86_64 378/647 Installing : perl-Text-Tabs+Wrap-2021.0814-490.fc38.noarch 379/647 Installing : perl-if-0.61.000-495.fc38.noarch 380/647 Installing : perl-Time-Local-2:1.300-490.fc38.noarch 381/647 Installing : perl-File-Path-2.18-490.fc38.noarch 382/647 Installing : perl-Pod-Escapes-1:1.07-490.fc38.noarch 383/647 Installing : perl-Class-Struct-0.66-495.fc38.noarch 384/647 Installing : perl-POSIX-2.03-495.fc38.x86_64 385/647 Installing : perl-Term-ANSIColor-5.01-491.fc38.noarch 386/647 Installing : perl-IPC-Open3-1.22-495.fc38.noarch 387/647 Installing : perl-HTTP-Tiny-0.082-2.fc38.noarch 388/647 Installing : perl-File-Temp-1:0.231.100-490.fc38.noarch 389/647 Installing : perl-Term-Cap-1.18-1.fc39.noarch 390/647 Installing : perl-Pod-Simple-1:3.43-491.fc38.noarch 391/647 Installing : perl-Socket-4:2.036-2.fc38.x86_64 392/647 Installing : perl-SelectSaver-1.02-495.fc38.noarch 393/647 Installing : perl-Symbol-1.09-495.fc38.noarch 394/647 Installing : perl-File-stat-1.12-495.fc38.noarch 395/647 Installing : perl-podlators-1:5.01-2.fc38.noarch 396/647 Installing : perl-Pod-Perldoc-3.28.01-491.fc38.noarch 397/647 Installing : perl-Fcntl-1.15-495.fc38.x86_64 398/647 Installing : perl-Text-ParseWords-3.31-490.fc38.noarch 399/647 Installing : perl-mro-1.26-495.fc38.x86_64 400/647 Installing : perl-IO-1.50-495.fc38.x86_64 401/647 Installing : perl-overloading-0.02-495.fc38.noarch 402/647 Installing : perl-Pod-Usage-4:2.03-4.fc38.noarch 403/647 Installing : perl-Errno-1.36-495.fc38.x86_64 404/647 Installing : perl-File-Basename-2.85-495.fc38.noarch 405/647 Installing : perl-Getopt-Std-1.13-495.fc38.noarch 406/647 Installing : perl-MIME-Base64-3.16-490.fc38.x86_64 407/647 Installing : perl-Scalar-List-Utils-5:1.63-490.fc38.x86_64 408/647 Installing : perl-constant-1.33-491.fc38.noarch 409/647 Installing : perl-Storable-1:3.26-490.fc38.x86_64 410/647 Installing : perl-overload-1.35-495.fc38.noarch 411/647 Installing : perl-parent-1:0.241-1.fc39.noarch 412/647 Installing : perl-vars-1.05-495.fc38.noarch 413/647 Installing : perl-Getopt-Long-1:2.54-2.fc38.noarch 414/647 Installing : perl-Carp-1.52-490.fc38.noarch 415/647 Installing : perl-Exporter-5.77-490.fc38.noarch 416/647 Installing : perl-PathTools-3.84-490.fc38.x86_64 417/647 Installing : perl-DynaLoader-1.52-495.fc38.x86_64 418/647 Installing : perl-Encode-4:3.19-493.fc38.x86_64 419/647 Installing : perl-libs-4:5.36.0-495.fc38.x86_64 420/647 Installing : perl-interpreter-4:5.36.0-495.fc38.x86_64 421/647 Installing : perl-File-Find-1.40-495.fc38.noarch 422/647 Installing : perl-threads-1:2.27-490.fc38.x86_64 423/647 Installing : perl-threads-shared-1.64-490.fc38.x86_64 424/647 Installing : perl-Thread-Queue-3.14-490.fc38.noarch 425/647 Installing : perl-Data-Dumper-2.184-491.fc38.x86_64 426/647 Installing : perl-B-1.83-495.fc38.x86_64 427/647 Installing : perl-English-1.11-495.fc38.noarch 428/647 Installing : perl-File-Compare-1.100.700-495.fc38.noarch 429/647 Installing : perl-File-Copy-2.39-495.fc38.noarch 430/647 Installing : autoconf-2.71-5.fc38.noarch 431/647 Installing : automake-1.16.5-12.fc39.noarch 432/647 Installing : libogg-devel-2:1.3.5-5.fc38.x86_64 433/647 Installing : libtheora-devel-1:1.1.1-33.fc38.x86_64 434/647 Installing : google-noto-fonts-common-20230201-1.fc38.noarch 435/647 Installing : google-noto-sans-vf-fonts-20230201-1.fc38.noarch 436/647 Installing : google-droid-sans-fonts-20200215-14.fc38.noarch 437/647 Installing : langpacks-core-font-en-3.0-31.fc38.noarch 438/647 Installing : cairo-1.17.8-3.fc39.x86_64 439/647 Installing : harfbuzz-7.1.0-1.fc39.x86_64 440/647 Installing : freetype-2.13.0-1.fc39.x86_64 441/647 Installing : fontconfig-2.14.2-1.fc38.x86_64 442/647 Running scriptlet: fontconfig-2.14.2-1.fc38.x86_64 442/647 Installing : libXft-2.3.6-2.fc38.x86_64 443/647 Installing : pango-1.50.14-1.fc39.x86_64 444/647 Running scriptlet: tk-1:8.6.12-4.fc38.x86_64 445/647 Installing : tk-1:8.6.12-4.fc38.x86_64 445/647 Installing : python3-3.11.2-1.fc39.x86_64 446/647 Installing : python3-tkinter-3.11.2-1.fc39.x86_64 447/647 Installing : python3-libs-3.11.2-1.fc39.x86_64 448/647 Installing : python3-numpy-1:1.24.1-3.fc39.x86_64 449/647 Installing : gstreamer1-1.22.1-1.fc39.x86_64 450/647 Installing : mpich-4.0.3-1.fc39.x86_64 451/647 Installing : hdf5-mpich-1.12.1-11.fc38.x86_64 452/647 Installing : boost-python3-1.81.0-1.fc39.x86_64 453/647 Installing : boost-numpy3-1.81.0-1.fc39.x86_64 454/647 Installing : cmake-rpm-macros-3.26.0-1.fc39.noarch 455/647 Installing : python3-packaging-23.0-1.fc38.noarch 456/647 Installing : python3-shiboken2-1:5.15.7-2.fc38.x86_64 457/647 Installing : python3-six-1.16.0-9.fc38.noarch 458/647 Installing : mkfontscale-1.2.2-3.fc38.x86_64 459/647 Installing : cairo-gobject-1.17.8-3.fc39.x86_64 460/647 Installing : librsvg2-2.55.90-1.fc39.x86_64 461/647 Installing : openslide-3.4.1-23.fc38.x86_64 462/647 Installing : openslide-devel-3.4.1-23.fc38.x86_64 463/647 Installing : xorg-x11-fonts-ISO8859-1-100dpi-7.5-35.fc38.noar 464/647 Running scriptlet: xorg-x11-fonts-ISO8859-1-100dpi-7.5-35.fc38.noar 464/647 Installing : python3-dateutil-1:2.8.2-6.fc39.noarch 465/647 Installing : python3-rpm-generators-14-3.fc39.noarch 466/647 Installing : python3-devel-3.11.2-1.fc39.x86_64 467/647 Installing : python3-numpy-f2py-1:1.24.1-3.fc39.x86_64 468/647 Installing : python3-scipy-1.10.1-2.fc39.x86_64 469/647 Installing : netcdf-mpich-4.9.2-1.fc39.x86_64 470/647 Installing : python3-contourpy-1.0.7-2.fc38.x86_64 471/647 Installing : crypto-policies-scripts-20230301-1.gita12f7b2.fc 472/647 Installing : nss-sysinit-3.88.1-2.fc39.x86_64 473/647 Installing : nss-3.88.1-2.fc39.x86_64 474/647 Running scriptlet: nss-3.88.1-2.fc39.x86_64 474/647 Installing : poppler-23.02.0-1.fc38.x86_64 475/647 Installing : poppler-glib-23.02.0-1.fc38.x86_64 476/647 Installing : java-17-openjdk-headless-1:17.0.6.0.10-4.fc39.x8 477/647 Running scriptlet: java-17-openjdk-headless-1:17.0.6.0.10-4.fc39.x8 477/647 Installing : libsrtp-2.3.0-10.fc38.x86_64 478/647 Installing : glib2-devel-2.76.0-1.fc39.x86_64 479/647 Installing : libwacom-2.6.0-1.fc38.x86_64 480/647 Installing : libinput-1.22.1-2.fc38.x86_64 481/647 Running scriptlet: libinput-1.22.1-2.fc38.x86_64 481/647 Installing : qt5-qtbase-gui-5.15.8-7.fc39.x86_64 482/647 Installing : qt5-qtdeclarative-5.15.8-4.fc39.x86_64 483/647 Installing : qt5-qtlocation-5.15.8-4.fc39.x86_64 484/647 Installing : qt5-qtwebchannel-5.15.8-2.fc38.x86_64 485/647 Installing : qt5-qttools-libs-designer-5.15.8-2.fc38.x86_64 486/647 Installing : qt5-qtwebengine-5.15.12-4.fc39.x86_64 487/647 Installing : qt5-qttools-libs-help-5.15.8-2.fc38.x86_64 488/647 Installing : qt5-qttools-libs-designercomponents-5.15.8-2.fc3 489/647 Installing : qt5-qtsensors-5.15.8-2.fc38.x86_64 490/647 Installing : qt5-qtxmlpatterns-5.15.8-2.fc38.x86_64 491/647 Installing : qt5-qtsvg-5.15.8-2.fc38.x86_64 492/647 Installing : qt5-qtx11extras-5.15.8-2.fc38.x86_64 493/647 Installing : qt5-designer-5.15.8-2.fc38.x86_64 494/647 Installing : qt5-qtwebengine-devtools-5.15.12-4.fc39.x86_64 495/647 Installing : qt5-qtcharts-5.15.8-2.fc38.x86_64 496/647 Installing : qt5-qtdatavis3d-5.15.8-2.fc38.x86_64 497/647 Installing : qt5-qtgraphicaleffects-5.15.8-2.fc38.x86_64 498/647 Installing : qt5-qtquickcontrols2-5.15.8-2.fc38.x86_64 499/647 Installing : qt5-qtremoteobjects-5.15.8-1.fc38.x86_64 500/647 Installing : qt5-qtscxml-5.15.8-2.fc38.x86_64 501/647 Installing : SoQt-1.6.0-12.fc38.x86_64 502/647 Installing : pyside2-tools-1:5.15.7-2.fc38.x86_64 503/647 Installing : qt5-linguist-5.15.8-2.fc38.x86_64 504/647 Installing : qt5-qtimageformats-5.15.8-2.fc38.x86_64 505/647 Installing : qt5-qt3d-5.15.8-2.fc38.x86_64 506/647 Installing : qt5-qtscript-5.15.8-2.fc38.x86_64 507/647 Installing : python3-appdirs-1.4.4-8.fc38.noarch 508/647 Installing : python3-brotli-1.0.9-11.fc38.x86_64 509/647 Installing : python3-cairo-1.23.0-2.fc38.x86_64 510/647 Installing : python3-cycler-0.11.0-7.fc38.noarch 511/647 Installing : python3-kiwisolver-1.4.4-7.fc38.x86_64 512/647 Installing : python3-lxml-4.9.2-2.fc38.x86_64 513/647 Installing : python3-munkres-1.1.2-14.fc38.noarch 514/647 Installing : python3-olefile-0.46-19.fc38.noarch 515/647 Installing : python3-pyparsing-3.0.9-3.fc38.noarch 516/647 Installing : python3-setuptools-65.5.1-2.fc38.noarch 517/647 Installing : python3-fs-2.4.16-1.fc39.noarch 518/647 Installing : python3-fonttools-4.39.2-1.fc39.x86_64 519/647 Installing : vulkan-headers-1.3.239.0-2.fc38.noarch 520/647 Installing : vulkan-loader-devel-1.3.239.0-1.fc38.x86_64 521/647 Installing : lasi-1.1.3-10.fc38.x86_64 522/647 Installing : gd-2.3.3-11.fc39.x86_64 523/647 Installing : libraqm-0.8.0-4.fc38.x86_64 524/647 Installing : python3-pillow-9.4.0-3.fc39.x86_64 525/647 Installing : python3-pillow-tk-9.4.0-3.fc39.x86_64 526/647 Installing : python3-matplotlib-tk-3.7.1-1.fc39.x86_64 527/647 Installing : python3-matplotlib-3.7.1-1.fc39.x86_64 528/647 Installing : ttmkfdir-3.0.9-67.fc38.x86_64 529/647 Installing : xorg-x11-fonts-Type1-7.5-35.fc38.noarch 530/647 Running scriptlet: xorg-x11-fonts-Type1-7.5-35.fc38.noarch 530/647 Installing : harfbuzz-icu-7.1.0-1.fc39.x86_64 531/647 Installing : glibc-headers-x86-2.37.9000-3.fc39.noarch 532/647 Installing : libxcrypt-devel-4.4.33-7.fc39.x86_64 533/647 Installing : glibc-devel-2.37.9000-3.fc39.x86_64 534/647 Installing : giflib-5.2.1-15.fc38.x86_64 535/647 Installing : gettext-envsubst-0.21.1-2.fc38.x86_64 536/647 Installing : gettext-runtime-0.21.1-2.fc38.x86_64 537/647 Installing : gettext-0.21.1-2.fc38.x86_64 538/647 Installing : gc-8.2.2-3.fc38.x86_64 539/647 Installing : guile22-2.2.7-8.fc39.x86_64 540/647 Installing : make-1:4.4-3.fc38.x86_64 541/647 Installing : gcc-13.0.1-0.8.fc39.x86_64 542/647 Running scriptlet: gcc-13.0.1-0.8.fc39.x86_64 542/647 Installing : cmake-3.26.0-1.fc39.x86_64 543/647 Installing : cmake-data-3.26.0-1.fc39.noarch 544/647 Installing : libquadmath-devel-13.0.1-0.8.fc39.x86_64 545/647 Installing : gcc-gfortran-13.0.1-0.8.fc39.x86_64 546/647 Installing : hdf5-devel-1.12.1-11.fc38.x86_64 547/647 Installing : blas-devel-3.11.0-2.fc38.x86_64 548/647 Installing : lapack-devel-3.11.0-2.fc38.x86_64 549/647 Installing : netcdf-devel-4.9.2-1.fc39.x86_64 550/647 Installing : netcdf-cxx-devel-4.2-31.fc38.x86_64 551/647 Installing : mpich-devel-4.0.3-1.fc39.x86_64 552/647 Installing : hdf5-mpich-devel-1.12.1-11.fc38.x86_64 553/647 Installing : netcdf-mpich-devel-4.9.2-1.fc39.x86_64 554/647 Installing : gcc-c++-13.0.1-0.8.fc39.x86_64 555/647 Installing : qt5-rpm-macros-5.15.8-2.fc38.noarch 556/647 Installing : qt5-qtbase-devel-5.15.8-7.fc39.x86_64 557/647 Installing : qt5-qtdeclarative-devel-5.15.8-4.fc39.x86_64 558/647 Installing : qt5-qtlocation-devel-5.15.8-4.fc39.x86_64 559/647 Installing : qt5-qtwebchannel-devel-5.15.8-2.fc38.x86_64 560/647 Installing : qt5-qtx11extras-devel-5.15.8-2.fc38.x86_64 561/647 Installing : fdk-aac-free-2.0.0-10.fc38.x86_64 562/647 Installing : dbus-common-1:1.14.6-1.fc38.noarch 563/647 Running scriptlet: dbus-common-1:1.14.6-1.fc38.noarch 563/647 Running scriptlet: dbus-broker-33-1.fc38.x86_64 564/647 Installing : dbus-broker-33-1.fc38.x86_64 564/647 Running scriptlet: dbus-broker-33-1.fc38.x86_64 564/647 Installing : dbus-1:1.14.6-1.fc38.x86_64 565/647 Installing : at-spi2-core-2.48.0-1.fc39.x86_64 566/647 Installing : atk-2.48.0-1.fc39.x86_64 567/647 Installing : at-spi2-atk-2.48.0-1.fc39.x86_64 568/647 Installing : gupnp-1.6.3-2.fc38.x86_64 569/647 Installing : gupnp-igd-1.2.0-8.fc38.x86_64 570/647 Installing : libnice-0.1.21-3.fc38.x86_64 571/647 Installing : clang-resource-filesystem-15.0.7-2.fc38.x86_64 572/647 Installing : clang-libs-15.0.7-2.fc38.x86_64 573/647 Installing : shiboken2-1:5.15.7-2.fc38.x86_64 574/647 Installing : python3-shiboken2-devel-1:5.15.7-2.fc38.x86_64 575/647 Installing : qt5-doctools-5.15.8-2.fc38.x86_64 576/647 Installing : qt5-qttools-devel-5.15.8-2.fc38.x86_64 577/647 Installing : cgnslib-common-4.3.0-7.fc38.noarch 578/647 Installing : cgnslib-4.3.0-7.fc38.x86_64 579/647 Installing : cgnslib-devel-4.3.0-7.fc38.x86_64 580/647 Installing : cfitsio-4.2.0-3.fc38.x86_64 581/647 Installing : gdal-libs-3.6.3-1.fc39.x86_64 582/647 Installing : vtk-9.2.6-2.fc39.x86_64 583/647 Installing : opencascade-draw-7.6.3-3.fc38.x86_64 584/647 Installing : opencascade-modeling-7.6.3-3.fc38.x86_64 585/647 Installing : opencascade-visualization-7.6.3-3.fc38.x86_64 586/647 Installing : opencascade-ocaf-7.6.3-3.fc38.x86_64 587/647 Installing : vtk-qt-9.2.6-2.fc39.x86_64 588/647 Installing : python3-vtk-9.2.6-2.fc39.x86_64 589/647 Installing : gdal-devel-3.6.3-1.fc39.x86_64 590/647 Installing : cdparanoia-libs-10.2-41.fc38.x86_64 591/647 Installing : gstreamer1-plugins-base-1.22.1-1.fc39.x86_64 592/647 Installing : qt5-qtwebkit-5.212.0-0.74alpha4.fc39.x86_64 593/647 Installing : qt5-qtwebkit-devel-5.212.0-0.74alpha4.fc39.x86_6 594/647 Installing : brotli-1.0.9-11.fc38.x86_64 595/647 Installing : brotli-devel-1.0.9-11.fc38.x86_64 596/647 Installing : harfbuzz-devel-7.1.0-1.fc39.x86_64 597/647 Installing : freetype-devel-2.13.0-1.fc39.x86_64 598/647 Installing : fontconfig-devel-2.14.2-1.fc38.x86_64 599/647 Installing : libXft-devel-2.3.6-2.fc38.x86_64 600/647 Installing : tk-devel-1:8.6.12-4.fc38.x86_64 601/647 Installing : boost-test-1.81.0-1.fc39.x86_64 602/647 Installing : boost-stacktrace-1.81.0-1.fc39.x86_64 603/647 Installing : boost-serialization-1.81.0-1.fc39.x86_64 604/647 Installing : boost-random-1.81.0-1.fc39.x86_64 605/647 Installing : boost-program-options-1.81.0-1.fc39.x86_64 606/647 Installing : boost-nowide-1.81.0-1.fc39.x86_64 607/647 Installing : boost-math-1.81.0-1.fc39.x86_64 608/647 Installing : boost-iostreams-1.81.0-1.fc39.x86_64 609/647 Installing : boost-contract-1.81.0-1.fc39.x86_64 610/647 Installing : boost-1.81.0-1.fc39.x86_64 611/647 Installing : boost-devel-1.81.0-1.fc39.x86_64 612/647 Installing : annobin-docs-11.14-1.fc39.noarch 613/647 Installing : adwaita-cursor-theme-44.0-1.fc39.noarch 614/647 Installing : adwaita-icon-theme-44.0-1.fc39.noarch 615/647 Installing : gtk3-3.24.37-1.fc39.x86_64 616/647 Installing : gstreamer1-plugins-bad-free-1.22.1-1.fc39.x86_64 617/647 Installing : qt5-qtmultimedia-5.15.8-2.fc38.x86_64 618/647 Installing : python3-pyside2-1:5.15.7-2.fc38.x86_64 619/647 Installing : java-17-openjdk-1:17.0.6.0.10-4.fc39.x86_64 620/647 Running scriptlet: java-17-openjdk-1:17.0.6.0.10-4.fc39.x86_64 620/647 Installing : vtk-java-9.2.6-2.fc39.x86_64 621/647 Installing : vtk-devel-9.2.6-2.fc39.x86_64 622/647 Installing : adobe-mappings-pdf-20190401-3.fc38.noarch 623/647 Installing : libgs-10.0.0-4.fc39.x86_64 624/647 Installing : graphviz-7.1.0-2.fc38.x86_64 625/647 Running scriptlet: graphviz-7.1.0-2.fc38.x86_64 625/647 Installing : doxygen-2:1.9.6-7.fc39.x86_64 626/647 Installing : opencascade-devel-7.6.3-3.fc38.x86_64 627/647 Installing : python3-pyside2-devel-1:5.15.7-2.fc38.x86_64 628/647 Installing : annobin-plugin-gcc-11.14-1.fc39.x86_64 629/647 Running scriptlet: annobin-plugin-gcc-11.14-1.fc39.x86_64 629/647 Installing : Coin4-devel-4.0.0-12.fc38.x86_64 630/647 Running scriptlet: Coin4-devel-4.0.0-12.fc38.x86_64 630/647 Installing : qt5-qttools-static-5.15.8-2.fc38.x86_64 631/647 Installing : qt5-qtwebengine-devel-5.15.12-4.fc39.x86_64 632/647 Installing : qt5-qtsvg-devel-5.15.8-2.fc38.x86_64 633/647 Installing : qt5-qtxmlpatterns-devel-5.15.8-2.fc38.x86_64 634/647 Installing : gcc-plugin-annobin-13.0.1-0.8.fc39.x86_64 635/647 Running scriptlet: gcc-plugin-annobin-13.0.1-0.8.fc39.x86_64 635/647 Installing : python3-pivy-0.6.8-2.fc38.x86_64 636/647 Installing : python3-pycxx-devel-7.1.7-4.fc38.noarch 637/647 Installing : libspnav-devel-1.0-3.fc38.x86_64 638/647 Installing : libXmu-devel-1.1.4-2.fc38.x86_64 639/647 Installing : zipios++-devel-0.1.5.9-30.fc38.x86_64 640/647 Installing : med-devel-4.1.0-11.fc38.x86_64 641/647 Installing : libappstream-glib-0.8.2-2.fc38.x86_64 642/647 Installing : desktop-file-utils-0.26-8.fc38.x86_64 643/647 Installing : xerces-c-devel-3.2.3-8.fc38.x86_64 644/647 Installing : swig-4.1.1-4.fc38.x86_64 645/647 Installing : libkdtree++-devel-0.7.0-34.fc38.noarch 646/647 Installing : dos2unix-7.4.4-2.fc39.x86_64 647/647 Running scriptlet: copy-jdk-configs-4.1-2.fc38.noarch 647/647 Running scriptlet: urw-base35-bookman-fonts-20200910-16.fc38.noarch 647/647 Running scriptlet: urw-base35-c059-fonts-20200910-16.fc38.noarch 647/647 Running scriptlet: urw-base35-d050000l-fonts-20200910-16.fc38.noarc 647/647 Running scriptlet: urw-base35-gothic-fonts-20200910-16.fc38.noarch 647/647 Running scriptlet: urw-base35-nimbus-mono-ps-fonts-20200910-16.fc38 647/647 Running scriptlet: urw-base35-nimbus-roman-fonts-20200910-16.fc38.n 647/647 Running scriptlet: urw-base35-nimbus-sans-fonts-20200910-16.fc38.no 647/647 Running scriptlet: urw-base35-p052-fonts-20200910-16.fc38.noarch 647/647 Running scriptlet: urw-base35-standard-symbols-ps-fonts-20200910-16 647/647 Running scriptlet: urw-base35-z003-fonts-20200910-16.fc38.noarch 647/647 Running scriptlet: fontconfig-2.14.2-1.fc38.x86_64 647/647 Running scriptlet: crypto-policies-scripts-20230301-1.gita12f7b2.fc 647/647 Running scriptlet: nss-3.88.1-2.fc39.x86_64 647/647 Running scriptlet: java-17-openjdk-headless-1:17.0.6.0.10-4.fc39.x8 647/647 Running scriptlet: java-17-openjdk-1:17.0.6.0.10-4.fc39.x86_64 647/647 Running scriptlet: dos2unix-7.4.4-2.fc39.x86_64 647/647 Verifying : netcdf-4.9.2-1.fc39.x86_64 1/647 Verifying : netcdf-devel-4.9.2-1.fc39.x86_64 2/647 Verifying : netcdf-mpich-4.9.2-1.fc39.x86_64 3/647 Verifying : netcdf-mpich-devel-4.9.2-1.fc39.x86_64 4/647 Verifying : Coin4-4.0.0-12.fc38.x86_64 5/647 Verifying : Coin4-devel-4.0.0-12.fc38.x86_64 6/647 Verifying : LibRaw-0.21.1-3.fc39.x86_64 7/647 Verifying : Lmod-8.7.20-1.fc39.x86_64 8/647 Verifying : PEGTL-devel-2.8.3-6.fc38.x86_64 9/647 Verifying : SoQt-1.6.0-12.fc38.x86_64 10/647 Verifying : SuperLU-5.3.0-5.fc39.x86_64 11/647 Verifying : adobe-mappings-cmap-20230118-1.fc38.noarch 12/647 Verifying : adobe-mappings-cmap-deprecated-20230118-1.fc38.n 13/647 Verifying : adobe-mappings-pdf-20190401-3.fc38.noarch 14/647 Verifying : adwaita-cursor-theme-44.0-1.fc39.noarch 15/647 Verifying : adwaita-icon-theme-44.0-1.fc39.noarch 16/647 Verifying : alsa-lib-1.2.8-3.fc38.x86_64 17/647 Verifying : annobin-docs-11.14-1.fc39.noarch 18/647 Verifying : annobin-plugin-gcc-11.14-1.fc39.x86_64 19/647 Verifying : armadillo-10.8.2-3.fc38.x86_64 20/647 Verifying : arpack-3.8.0-6.fc38.x86_64 21/647 Verifying : assimp-5.0.1-10.fc38.x86_64 22/647 Verifying : at-spi2-atk-2.48.0-1.fc39.x86_64 23/647 Verifying : at-spi2-core-2.48.0-1.fc39.x86_64 24/647 Verifying : atk-2.48.0-1.fc39.x86_64 25/647 Verifying : autoconf-2.71-5.fc38.noarch 26/647 Verifying : automake-1.16.5-12.fc39.noarch 27/647 Verifying : avahi-libs-0.8-20.fc38.x86_64 28/647 Verifying : blas-3.11.0-2.fc38.x86_64 29/647 Verifying : blas-devel-3.11.0-2.fc38.x86_64 30/647 Verifying : blas64-3.11.0-2.fc38.x86_64 31/647 Verifying : blas64_-3.11.0-2.fc38.x86_64 32/647 Verifying : blosc-1.21.2-2.fc38.x86_64 33/647 Verifying : boost-1.81.0-1.fc39.x86_64 34/647 Verifying : boost-atomic-1.81.0-1.fc39.x86_64 35/647 Verifying : boost-chrono-1.81.0-1.fc39.x86_64 36/647 Verifying : boost-container-1.81.0-1.fc39.x86_64 37/647 Verifying : boost-context-1.81.0-1.fc39.x86_64 38/647 Verifying : boost-contract-1.81.0-1.fc39.x86_64 39/647 Verifying : boost-coroutine-1.81.0-1.fc39.x86_64 40/647 Verifying : boost-date-time-1.81.0-1.fc39.x86_64 41/647 Verifying : boost-devel-1.81.0-1.fc39.x86_64 42/647 Verifying : boost-fiber-1.81.0-1.fc39.x86_64 43/647 Verifying : boost-filesystem-1.81.0-1.fc39.x86_64 44/647 Verifying : boost-graph-1.81.0-1.fc39.x86_64 45/647 Verifying : boost-iostreams-1.81.0-1.fc39.x86_64 46/647 Verifying : boost-json-1.81.0-1.fc39.x86_64 47/647 Verifying : boost-locale-1.81.0-1.fc39.x86_64 48/647 Verifying : boost-log-1.81.0-1.fc39.x86_64 49/647 Verifying : boost-math-1.81.0-1.fc39.x86_64 50/647 Verifying : boost-nowide-1.81.0-1.fc39.x86_64 51/647 Verifying : boost-numpy3-1.81.0-1.fc39.x86_64 52/647 Verifying : boost-program-options-1.81.0-1.fc39.x86_64 53/647 Verifying : boost-python3-1.81.0-1.fc39.x86_64 54/647 Verifying : boost-random-1.81.0-1.fc39.x86_64 55/647 Verifying : boost-regex-1.81.0-1.fc39.x86_64 56/647 Verifying : boost-serialization-1.81.0-1.fc39.x86_64 57/647 Verifying : boost-stacktrace-1.81.0-1.fc39.x86_64 58/647 Verifying : boost-system-1.81.0-1.fc39.x86_64 59/647 Verifying : boost-test-1.81.0-1.fc39.x86_64 60/647 Verifying : boost-thread-1.81.0-1.fc39.x86_64 61/647 Verifying : boost-timer-1.81.0-1.fc39.x86_64 62/647 Verifying : boost-type_erasure-1.81.0-1.fc39.x86_64 63/647 Verifying : boost-wave-1.81.0-1.fc39.x86_64 64/647 Verifying : brotli-1.0.9-11.fc38.x86_64 65/647 Verifying : brotli-devel-1.0.9-11.fc38.x86_64 66/647 Verifying : bzip2-devel-1.0.8-13.fc38.x86_64 67/647 Verifying : cairo-1.17.8-3.fc39.x86_64 68/647 Verifying : cairo-gobject-1.17.8-3.fc39.x86_64 69/647 Verifying : cdparanoia-libs-10.2-41.fc38.x86_64 70/647 Verifying : cfitsio-4.2.0-3.fc38.x86_64 71/647 Verifying : cgnslib-4.3.0-7.fc38.x86_64 72/647 Verifying : cgnslib-common-4.3.0-7.fc38.noarch 73/647 Verifying : cgnslib-devel-4.3.0-7.fc38.x86_64 74/647 Verifying : cgnslib-libs-4.3.0-7.fc38.x86_64 75/647 Verifying : clang-libs-15.0.7-2.fc38.x86_64 76/647 Verifying : clang-resource-filesystem-15.0.7-2.fc38.x86_64 77/647 Verifying : cli11-devel-2.3.2-3.fc39.noarch 78/647 Verifying : cmake-3.26.0-1.fc39.x86_64 79/647 Verifying : cmake-data-3.26.0-1.fc39.noarch 80/647 Verifying : cmake-filesystem-3.26.0-1.fc39.x86_64 81/647 Verifying : cmake-rpm-macros-3.26.0-1.fc39.noarch 82/647 Verifying : colord-libs-1.4.6-2.fc37.x86_64 83/647 Verifying : copy-jdk-configs-4.1-2.fc38.noarch 84/647 Verifying : cpp-13.0.1-0.8.fc39.x86_64 85/647 Verifying : crypto-policies-scripts-20230301-1.gita12f7b2.fc 86/647 Verifying : cups-libs-1:2.4.2-10.fc39.x86_64 87/647 Verifying : dbus-1:1.14.6-1.fc38.x86_64 88/647 Verifying : dbus-broker-33-1.fc38.x86_64 89/647 Verifying : dbus-common-1:1.14.6-1.fc38.noarch 90/647 Verifying : dbus-libs-1:1.14.6-1.fc38.x86_64 91/647 Verifying : dejavu-sans-fonts-2.37-20.fc38.noarch 92/647 Verifying : desktop-file-utils-0.26-8.fc38.x86_64 93/647 Verifying : dos2unix-7.4.4-2.fc39.x86_64 94/647 Verifying : double-conversion-3.1.5-8.fc38.x86_64 95/647 Verifying : double-conversion-devel-3.1.5-8.fc38.x86_64 96/647 Verifying : doxygen-2:1.9.6-7.fc39.x86_64 97/647 Verifying : eigen3-devel-3.4.0-9.fc38.noarch 98/647 Verifying : emacs-filesystem-1:28.2-4.fc38.noarch 99/647 Verifying : expat-2.5.0-2.fc38.x86_64 100/647 Verifying : expat-devel-2.5.0-2.fc38.x86_64 101/647 Verifying : fdk-aac-free-2.0.0-10.fc38.x86_64 102/647 Verifying : flac-libs-1.4.2-2.fc38.x86_64 103/647 Verifying : flexiblas-3.3.0-2.fc38.x86_64 104/647 Verifying : flexiblas-devel-3.3.0-2.fc38.x86_64 105/647 Verifying : flexiblas-netlib-3.3.0-2.fc38.x86_64 106/647 Verifying : flexiblas-netlib64-3.3.0-2.fc38.x86_64 107/647 Verifying : flexiblas-openblas-openmp-3.3.0-2.fc38.x86_64 108/647 Verifying : flexiblas-openblas-openmp64-3.3.0-2.fc38.x86_64 109/647 Verifying : fontconfig-2.14.2-1.fc38.x86_64 110/647 Verifying : fontconfig-devel-2.14.2-1.fc38.x86_64 111/647 Verifying : fonts-filesystem-1:2.0.5-11.fc38.noarch 112/647 Verifying : freeimage-3.19.0-0.13.svn1889.fc38.x86_64 113/647 Verifying : freeimage-devel-3.19.0-0.13.svn1889.fc38.x86_64 114/647 Verifying : freetype-2.13.0-1.fc39.x86_64 115/647 Verifying : freetype-devel-2.13.0-1.fc39.x86_64 116/647 Verifying : freexl-1.0.6-21.fc38.x86_64 117/647 Verifying : fribidi-1.0.12-4.fc39.x86_64 118/647 Verifying : gc-8.2.2-3.fc38.x86_64 119/647 Verifying : gcc-13.0.1-0.8.fc39.x86_64 120/647 Verifying : gcc-c++-13.0.1-0.8.fc39.x86_64 121/647 Verifying : gcc-gfortran-13.0.1-0.8.fc39.x86_64 122/647 Verifying : gcc-plugin-annobin-13.0.1-0.8.fc39.x86_64 123/647 Verifying : gd-2.3.3-11.fc39.x86_64 124/647 Verifying : gdal-devel-3.6.3-1.fc39.x86_64 125/647 Verifying : gdal-libs-3.6.3-1.fc39.x86_64 126/647 Verifying : gdk-pixbuf2-2.42.10-2.fc38.x86_64 127/647 Verifying : gdk-pixbuf2-modules-2.42.10-2.fc38.x86_64 128/647 Verifying : geos-3.11.2-1.fc39.x86_64 129/647 Verifying : gettext-0.21.1-2.fc38.x86_64 130/647 Verifying : gettext-envsubst-0.21.1-2.fc38.x86_64 131/647 Verifying : gettext-libs-0.21.1-2.fc38.x86_64 132/647 Verifying : gettext-runtime-0.21.1-2.fc38.x86_64 133/647 Verifying : giflib-5.2.1-15.fc38.x86_64 134/647 Verifying : gl-manpages-1.1-26.20190306.fc38.noarch 135/647 Verifying : gl2ps-1.4.2-7.fc38.x86_64 136/647 Verifying : gl2ps-devel-1.4.2-7.fc38.x86_64 137/647 Verifying : glew-devel-2.2.0-4.fc38.x86_64 138/647 Verifying : glib2-2.76.0-1.fc39.x86_64 139/647 Verifying : glib2-devel-2.76.0-1.fc39.x86_64 140/647 Verifying : glibc-devel-2.37.9000-3.fc39.x86_64 141/647 Verifying : glibc-headers-x86-2.37.9000-3.fc39.noarch 142/647 Verifying : glx-utils-8.5.0-1.fc38.x86_64 143/647 Verifying : gnutls-3.8.0-3.fc39.x86_64 144/647 Verifying : google-droid-sans-fonts-20200215-14.fc38.noarch 145/647 Verifying : google-noto-fonts-common-20230201-1.fc38.noarch 146/647 Verifying : google-noto-sans-vf-fonts-20230201-1.fc38.noarch 147/647 Verifying : graphene-1.10.6-5.fc38.x86_64 148/647 Verifying : graphite2-1.3.14-11.fc38.x86_64 149/647 Verifying : graphite2-devel-1.3.14-11.fc38.x86_64 150/647 Verifying : graphviz-7.1.0-2.fc38.x86_64 151/647 Verifying : groff-base-1.22.4-11.fc38.x86_64 152/647 Verifying : gsm-1.0.22-2.fc38.x86_64 153/647 Verifying : gssdp-1.6.2-2.fc38.x86_64 154/647 Verifying : gstreamer1-1.22.1-1.fc39.x86_64 155/647 Verifying : gstreamer1-plugins-bad-free-1.22.1-1.fc39.x86_64 156/647 Verifying : gstreamer1-plugins-base-1.22.1-1.fc39.x86_64 157/647 Verifying : gtk-update-icon-cache-3.24.37-1.fc39.x86_64 158/647 Verifying : gtk3-3.24.37-1.fc39.x86_64 159/647 Verifying : gts-0.7.6-44.20121130.fc38.x86_64 160/647 Verifying : guile22-2.2.7-8.fc39.x86_64 161/647 Verifying : gupnp-1.6.3-2.fc38.x86_64 162/647 Verifying : gupnp-igd-1.2.0-8.fc38.x86_64 163/647 Verifying : harfbuzz-7.1.0-1.fc39.x86_64 164/647 Verifying : harfbuzz-devel-7.1.0-1.fc39.x86_64 165/647 Verifying : harfbuzz-icu-7.1.0-1.fc39.x86_64 166/647 Verifying : hdf-libs-4.2.15-12.fc38.x86_64 167/647 Verifying : hdf5-1.12.1-11.fc38.x86_64 168/647 Verifying : hdf5-devel-1.12.1-11.fc38.x86_64 169/647 Verifying : hdf5-mpich-1.12.1-11.fc38.x86_64 170/647 Verifying : hdf5-mpich-devel-1.12.1-11.fc38.x86_64 171/647 Verifying : hicolor-icon-theme-0.17-15.fc38.noarch 172/647 Verifying : highway-1.0.4-1.fc39.x86_64 173/647 Verifying : hwdata-0.368-1.fc39.noarch 174/647 Verifying : hwloc-libs-2.9.0-6.fc39.x86_64 175/647 Verifying : hyphen-2.8.8-20.fc39.x86_64 176/647 Verifying : imath-3.1.6-3.fc39.x86_64 177/647 Verifying : irrXML-1.8.5-4.fc38.x86_64 178/647 Verifying : iso-codes-4.13.0-1.fc39.noarch 179/647 Verifying : jasper-libs-3.0.6-2.fc38.x86_64 180/647 Verifying : java-17-openjdk-1:17.0.6.0.10-4.fc39.x86_64 181/647 Verifying : java-17-openjdk-headless-1:17.0.6.0.10-4.fc39.x8 182/647 Verifying : javapackages-filesystem-6.1.0-8.fc39.noarch 183/647 Verifying : jbig2dec-libs-0.19-8.fc38.x86_64 184/647 Verifying : jbigkit-libs-2.1-25.fc38.x86_64 185/647 Verifying : json-c-0.16-4.fc38.x86_64 186/647 Verifying : json-devel-3.11.2-2.fc39.x86_64 187/647 Verifying : json-glib-1.6.6-4.fc38.x86_64 188/647 Verifying : jsoncpp-1.9.5-4.fc38.x86_64 189/647 Verifying : jsoncpp-devel-1.9.5-4.fc38.x86_64 190/647 Verifying : jxrlib-1.1-24.fc38.x86_64 191/647 Verifying : kernel-headers-6.3.0-0.rc3.git0.1.fc39.x86_64 192/647 Verifying : lame-libs-3.100-14.fc38.x86_64 193/647 Verifying : langpacks-core-font-en-3.0-31.fc38.noarch 194/647 Verifying : lapack-3.11.0-2.fc38.x86_64 195/647 Verifying : lapack-devel-3.11.0-2.fc38.x86_64 196/647 Verifying : lapack64-3.11.0-2.fc38.x86_64 197/647 Verifying : lapack64_-3.11.0-2.fc38.x86_64 198/647 Verifying : lasi-1.1.3-10.fc38.x86_64 199/647 Verifying : lcms2-2.15-1.fc39.x86_64 200/647 Verifying : libGLEW-2.2.0-4.fc38.x86_64 201/647 Verifying : libICE-1.0.10-10.fc38.x86_64 202/647 Verifying : libICE-devel-1.0.10-10.fc38.x86_64 203/647 Verifying : libSM-1.2.3-12.fc38.x86_64 204/647 Verifying : libSM-devel-1.2.3-12.fc38.x86_64 205/647 Verifying : libX11-1.8.4-1.fc38.x86_64 206/647 Verifying : libX11-common-1.8.4-1.fc38.noarch 207/647 Verifying : libX11-devel-1.8.4-1.fc38.x86_64 208/647 Verifying : libX11-xcb-1.8.4-1.fc38.x86_64 209/647 Verifying : libXScrnSaver-1.2.3-12.fc38.x86_64 210/647 Verifying : libXScrnSaver-devel-1.2.3-12.fc38.x86_64 211/647 Verifying : libXau-1.0.11-2.fc38.x86_64 212/647 Verifying : libXau-devel-1.0.11-2.fc38.x86_64 213/647 Verifying : libXcomposite-0.4.5-9.fc38.x86_64 214/647 Verifying : libXcomposite-devel-0.4.5-9.fc38.x86_64 215/647 Verifying : libXcursor-1.2.1-3.fc38.x86_64 216/647 Verifying : libXcursor-devel-1.2.1-3.fc38.x86_64 217/647 Verifying : libXdamage-1.1.5-9.fc38.x86_64 218/647 Verifying : libXdmcp-1.1.3-10.fc38.x86_64 219/647 Verifying : libXdmcp-devel-1.1.3-10.fc38.x86_64 220/647 Verifying : libXext-1.3.5-2.fc38.x86_64 221/647 Verifying : libXext-devel-1.3.5-2.fc38.x86_64 222/647 Verifying : libXfixes-6.0.0-5.fc38.x86_64 223/647 Verifying : libXfixes-devel-6.0.0-5.fc38.x86_64 224/647 Verifying : libXft-2.3.6-2.fc38.x86_64 225/647 Verifying : libXft-devel-2.3.6-2.fc38.x86_64 226/647 Verifying : libXi-1.8-4.fc38.x86_64 227/647 Verifying : libXi-devel-1.8-4.fc38.x86_64 228/647 Verifying : libXinerama-1.1.5-2.fc38.x86_64 229/647 Verifying : libXinerama-devel-1.1.5-2.fc38.x86_64 230/647 Verifying : libXmu-1.1.4-2.fc38.x86_64 231/647 Verifying : libXmu-devel-1.1.4-2.fc38.x86_64 232/647 Verifying : libXpm-3.5.15-3.fc38.x86_64 233/647 Verifying : libXpm-devel-3.5.15-3.fc38.x86_64 234/647 Verifying : libXrandr-1.5.2-10.fc38.x86_64 235/647 Verifying : libXrandr-devel-1.5.2-10.fc38.x86_64 236/647 Verifying : libXrender-0.9.11-2.fc38.x86_64 237/647 Verifying : libXrender-devel-0.9.11-2.fc38.x86_64 238/647 Verifying : libXres-1.2.1-4.fc38.x86_64 239/647 Verifying : libXres-devel-1.2.1-4.fc38.x86_64 240/647 Verifying : libXt-1.2.1-4.fc38.x86_64 241/647 Verifying : libXt-devel-1.2.1-4.fc38.x86_64 242/647 Verifying : libXtst-1.2.4-2.fc38.x86_64 243/647 Verifying : libXtst-devel-1.2.4-2.fc38.x86_64 244/647 Verifying : libXv-1.0.11-18.fc38.x86_64 245/647 Verifying : libXv-devel-1.0.11-18.fc38.x86_64 246/647 Verifying : libXxf86vm-1.1.5-2.fc38.x86_64 247/647 Verifying : libaec-1.0.6-4.fc38.x86_64 248/647 Verifying : libaec-devel-1.0.6-4.fc38.x86_64 249/647 Verifying : libaom-3.6.0-1.fc39.x86_64 250/647 Verifying : libappstream-glib-0.8.2-2.fc38.x86_64 251/647 Verifying : libarchive-devel-3.6.1-5.fc39.x86_64 252/647 Verifying : libasyncns-0.8-24.fc38.x86_64 253/647 Verifying : libavif-0.11.1-9.fc39.x86_64 254/647 Verifying : libb2-0.98.1-8.fc38.x86_64 255/647 Verifying : libblkid-devel-2.38.1-4.fc38.x86_64 256/647 Verifying : libcloudproviders-0.3.1-7.fc38.x86_64 257/647 Verifying : libcurl-devel-8.0.1-1.fc39.x86_64 258/647 Verifying : libdatrie-0.2.13-5.fc38.x86_64 259/647 Verifying : libdav1d-1.1.0-1.fc39.x86_64 260/647 Verifying : libdrm-2.4.114-2.fc38.x86_64 261/647 Verifying : libdrm-devel-2.4.114-2.fc38.x86_64 262/647 Verifying : libdvdnav-6.1.1-5.fc38.x86_64 263/647 Verifying : libdvdread-6.1.3-3.fc38.x86_64 264/647 Verifying : libedit-3.1-45.20221030cvs.fc38.x86_64 265/647 Verifying : libepoxy-1.5.10-3.fc38.x86_64 266/647 Verifying : libevdev-1.13.0-2.fc38.x86_64 267/647 Verifying : libffi-devel-3.4.4-2.fc38.x86_64 268/647 Verifying : libfontenc-1.1.6-2.fc38.x86_64 269/647 Verifying : libgeotiff-1.7.1-7.fc39.x86_64 270/647 Verifying : libgfortran-13.0.1-0.8.fc39.x86_64 271/647 Verifying : libglvnd-1:1.6.0-2.fc38.x86_64 272/647 Verifying : libglvnd-core-devel-1:1.6.0-2.fc38.x86_64 273/647 Verifying : libglvnd-devel-1:1.6.0-2.fc38.x86_64 274/647 Verifying : libglvnd-egl-1:1.6.0-2.fc38.x86_64 275/647 Verifying : libglvnd-gles-1:1.6.0-2.fc38.x86_64 276/647 Verifying : libglvnd-glx-1:1.6.0-2.fc38.x86_64 277/647 Verifying : libglvnd-opengl-1:1.6.0-2.fc38.x86_64 278/647 Verifying : libgs-10.0.0-4.fc39.x86_64 279/647 Verifying : libgta-1.2.1-9.fc38.x86_64 280/647 Verifying : libgudev-237-4.fc38.x86_64 281/647 Verifying : libgusb-0.4.5-1.fc38.x86_64 282/647 Verifying : libharu-2.4.3-2.fc38.x86_64 283/647 Verifying : libharu-devel-2.4.3-2.fc38.x86_64 284/647 Verifying : libicu-72.1-2.fc38.x86_64 285/647 Verifying : libicu-devel-72.1-2.fc38.x86_64 286/647 Verifying : libijs-0.35-17.fc38.x86_64 287/647 Verifying : libimagequant-4.0.1-4.fc39.x86_64 288/647 Verifying : libinput-1.22.1-2.fc38.x86_64 289/647 Verifying : libjpeg-turbo-2.1.4-2.fc38.x86_64 290/647 Verifying : libjpeg-turbo-devel-2.1.4-2.fc38.x86_64 291/647 Verifying : libjxl-1:0.7.0-6.fc38.x86_64 292/647 Verifying : libkdtree++-devel-0.7.0-34.fc38.noarch 293/647 Verifying : libkml-1.3.0-43.fc38.x86_64 294/647 Verifying : liblerc-4.0.0-3.fc38.x86_64 295/647 Verifying : libmng-2.0.3-18.fc39.x86_64 296/647 Verifying : libmount-devel-2.38.1-4.fc38.x86_64 297/647 Verifying : libmpc-1.3.1-2.fc38.x86_64 298/647 Verifying : libnice-0.1.21-3.fc38.x86_64 299/647 Verifying : libogg-2:1.3.5-5.fc38.x86_64 300/647 Verifying : libogg-devel-2:1.3.5-5.fc38.x86_64 301/647 Verifying : libpaper-1:2.0.10-1.fc39.x86_64 302/647 Verifying : libpciaccess-0.16-8.fc38.x86_64 303/647 Verifying : libpciaccess-devel-0.16-8.fc38.x86_64 304/647 Verifying : libpng-2:1.6.37-14.fc38.x86_64 305/647 Verifying : libpng-devel-2:1.6.37-14.fc38.x86_64 306/647 Verifying : libpq-15.0-3.fc38.x86_64 307/647 Verifying : libpq-devel-15.0-3.fc38.x86_64 308/647 Verifying : libproxy-0.4.18-5.fc38.x86_64 309/647 Verifying : libqhull_r-1:7.2.1-12.fc38.x86_64 310/647 Verifying : libquadmath-13.0.1-0.8.fc39.x86_64 311/647 Verifying : libquadmath-devel-13.0.1-0.8.fc39.x86_64 312/647 Verifying : libraqm-0.8.0-4.fc38.x86_64 313/647 Verifying : librsvg2-2.55.90-1.fc39.x86_64 314/647 Verifying : librttopo-1.1.0-11.fc38.x86_64 315/647 Verifying : libselinux-devel-3.5-1.fc39.x86_64 316/647 Verifying : libsepol-devel-3.5-1.fc39.x86_64 317/647 Verifying : libsndfile-1.1.0-6.fc38.x86_64 318/647 Verifying : libsoup3-3.4.0-2.fc39.x86_64 319/647 Verifying : libspatialite-5.0.1-21.fc39.x86_64 320/647 Verifying : libspnav-1.0-3.fc38.x86_64 321/647 Verifying : libspnav-devel-1.0-3.fc38.x86_64 322/647 Verifying : libsrtp-2.3.0-10.fc38.x86_64 323/647 Verifying : libstdc++-devel-13.0.1-0.8.fc39.x86_64 324/647 Verifying : libstemmer-2.2.0-5.fc38.x86_64 325/647 Verifying : libthai-0.1.29-4.fc38.x86_64 326/647 Verifying : libtheora-1:1.1.1-33.fc38.x86_64 327/647 Verifying : libtheora-devel-1:1.1.1-33.fc38.x86_64 328/647 Verifying : libtiff-4.4.0-5.fc38.x86_64 329/647 Verifying : libtiff-devel-4.4.0-5.fc38.x86_64 330/647 Verifying : libtool-ltdl-2.4.7-6.fc38.x86_64 331/647 Verifying : libtracker-sparql-3.5.0-1.fc39.x86_64 332/647 Verifying : libunistring-1.1-3.fc38.x86_64 333/647 Verifying : libunwind-1.7.0-0.1.rc2.fc39.x86_64 334/647 Verifying : libusb1-1.0.26-2.fc38.x86_64 335/647 Verifying : libuv-1:1.44.2-3.fc38.x86_64 336/647 Verifying : libva-2.17.0-2.fc38.x86_64 337/647 Verifying : libvisual-1:0.4.0-38.fc38.x86_64 338/647 Verifying : libvmaf-2.3.0-5.fc38.x86_64 339/647 Verifying : libvorbis-1:1.3.7-7.fc38.x86_64 340/647 Verifying : libvpx-1.13.0-2.fc39.x86_64 341/647 Verifying : libwacom-2.6.0-1.fc38.x86_64 342/647 Verifying : libwacom-data-2.6.0-1.fc38.noarch 343/647 Verifying : libwayland-client-1.21.0-2.fc38.x86_64 344/647 Verifying : libwayland-cursor-1.21.0-2.fc38.x86_64 345/647 Verifying : libwayland-egl-1.21.0-2.fc38.x86_64 346/647 Verifying : libwayland-server-1.21.0-2.fc38.x86_64 347/647 Verifying : libwebp-1.3.0-2.fc38.x86_64 348/647 Verifying : libxcb-1.13.1-11.fc38.x86_64 349/647 Verifying : libxcb-devel-1.13.1-11.fc38.x86_64 350/647 Verifying : libxcrypt-devel-4.4.33-7.fc39.x86_64 351/647 Verifying : libxkbcommon-1.5.0-2.fc38.x86_64 352/647 Verifying : libxkbcommon-x11-1.5.0-2.fc38.x86_64 353/647 Verifying : libxkbfile-1.1.1-2.fc38.x86_64 354/647 Verifying : libxkbfile-devel-1.1.1-2.fc38.x86_64 355/647 Verifying : libxml2-devel-2.10.3-3.fc38.x86_64 356/647 Verifying : libxshmfence-1.3-12.fc38.x86_64 357/647 Verifying : libxslt-1.1.37-3.fc39.x86_64 358/647 Verifying : lilv-libs-0.24.14-4.fc38.x86_64 359/647 Verifying : lksctp-tools-1.0.19-3.fc38.x86_64 360/647 Verifying : llvm-libs-15.0.7-2.fc38.x86_64 361/647 Verifying : lua-5.4.4-9.fc39.x86_64 362/647 Verifying : lua-filesystem-1.8.0-8.fc38.x86_64 363/647 Verifying : lua-json-1.3.4-3.fc38.noarch 364/647 Verifying : lua-lpeg-1.0.2-10.fc38.x86_64 365/647 Verifying : lua-posix-36.1-1.fc39.x86_64 366/647 Verifying : lua-term-0.07-17.fc38.x86_64 367/647 Verifying : lz4-devel-1.9.4-2.fc38.x86_64 368/647 Verifying : m4-1.4.19-4.fc37.x86_64 369/647 Verifying : make-1:4.4-3.fc38.x86_64 370/647 Verifying : mariadb-connector-c-3.2.7-3.fc38.x86_64 371/647 Verifying : mariadb-connector-c-config-3.2.7-3.fc38.noarch 372/647 Verifying : mariadb-connector-c-devel-3.2.7-3.fc38.x86_64 373/647 Verifying : med-4.1.0-11.fc38.x86_64 374/647 Verifying : med-devel-4.1.0-11.fc38.x86_64 375/647 Verifying : mesa-filesystem-23.0.0-1.fc39.x86_64 376/647 Verifying : mesa-libEGL-23.0.0-1.fc39.x86_64 377/647 Verifying : mesa-libEGL-devel-23.0.0-1.fc39.x86_64 378/647 Verifying : mesa-libGL-23.0.0-1.fc39.x86_64 379/647 Verifying : mesa-libGL-devel-23.0.0-1.fc39.x86_64 380/647 Verifying : mesa-libGLU-9.0.1-8.fc38.x86_64 381/647 Verifying : mesa-libGLU-devel-9.0.1-8.fc38.x86_64 382/647 Verifying : mesa-libgbm-23.0.0-1.fc39.x86_64 383/647 Verifying : mesa-libglapi-23.0.0-1.fc39.x86_64 384/647 Verifying : minizip-ng-3.0.7-3.fc38.x86_64 385/647 Verifying : mkfontscale-1.2.2-3.fc38.x86_64 386/647 Verifying : mpdecimal-2.5.1-6.fc38.x86_64 387/647 Verifying : mpg123-libs-1.31.3-1.fc39.x86_64 388/647 Verifying : mpich-4.0.3-1.fc39.x86_64 389/647 Verifying : mpich-devel-4.0.3-1.fc39.x86_64 390/647 Verifying : mtdev-1.1.6-5.fc38.x86_64 391/647 Verifying : ncurses-6.4-3.20230114.fc38.x86_64 392/647 Verifying : netcdf-cxx-4.2-31.fc38.x86_64 393/647 Verifying : netcdf-cxx-devel-4.2-31.fc38.x86_64 394/647 Verifying : netpbm-11.01.00-2.fc38.x86_64 395/647 Verifying : nettle-3.8-3.fc38.x86_64 396/647 Verifying : nspr-4.35.0-5.fc39.x86_64 397/647 Verifying : nss-3.88.1-2.fc39.x86_64 398/647 Verifying : nss-softokn-3.88.1-2.fc39.x86_64 399/647 Verifying : nss-softokn-freebl-3.88.1-2.fc39.x86_64 400/647 Verifying : nss-sysinit-3.88.1-2.fc39.x86_64 401/647 Verifying : nss-util-3.88.1-2.fc39.x86_64 402/647 Verifying : ogdi-4.1.0-10.fc38.x86_64 403/647 Verifying : openal-soft-1.23.0-1.fc38.x86_64 404/647 Verifying : openblas-0.3.21-4.fc38.x86_64 405/647 Verifying : openblas-openmp-0.3.21-4.fc38.x86_64 406/647 Verifying : openblas-openmp64-0.3.21-4.fc38.x86_64 407/647 Verifying : opencascade-devel-7.6.3-3.fc38.x86_64 408/647 Verifying : opencascade-draw-7.6.3-3.fc38.x86_64 409/647 Verifying : opencascade-foundation-7.6.3-3.fc38.x86_64 410/647 Verifying : opencascade-modeling-7.6.3-3.fc38.x86_64 411/647 Verifying : opencascade-ocaf-7.6.3-3.fc38.x86_64 412/647 Verifying : opencascade-visualization-7.6.3-3.fc38.x86_64 413/647 Verifying : openexr-libs-3.1.6-1.fc39.x86_64 414/647 Verifying : openjpeg2-2.5.0-3.fc38.x86_64 415/647 Verifying : openslide-3.4.1-23.fc38.x86_64 416/647 Verifying : openslide-devel-3.4.1-23.fc38.x86_64 417/647 Verifying : openssl-devel-1:3.0.8-1.fc39.x86_64 418/647 Verifying : opus-1.3.1-12.fc39.x86_64 419/647 Verifying : orc-0.4.33-2.fc38.x86_64 420/647 Verifying : pango-1.50.14-1.fc39.x86_64 421/647 Verifying : pciutils-libs-3.9.0-3.fc38.x86_64 422/647 Verifying : pcre-8.45-1.fc38.3.x86_64 423/647 Verifying : pcre2-devel-10.42-1.fc38.1.x86_64 424/647 Verifying : pcre2-utf16-10.42-1.fc38.1.x86_64 425/647 Verifying : pcre2-utf32-10.42-1.fc38.1.x86_64 426/647 Verifying : perl-B-1.83-495.fc38.x86_64 427/647 Verifying : perl-Carp-1.52-490.fc38.noarch 428/647 Verifying : perl-Class-Struct-0.66-495.fc38.noarch 429/647 Verifying : perl-Data-Dumper-2.184-491.fc38.x86_64 430/647 Verifying : perl-DynaLoader-1.52-495.fc38.x86_64 431/647 Verifying : perl-Encode-4:3.19-493.fc38.x86_64 432/647 Verifying : perl-English-1.11-495.fc38.noarch 433/647 Verifying : perl-Errno-1.36-495.fc38.x86_64 434/647 Verifying : perl-Exporter-5.77-490.fc38.noarch 435/647 Verifying : perl-Fcntl-1.15-495.fc38.x86_64 436/647 Verifying : perl-File-Basename-2.85-495.fc38.noarch 437/647 Verifying : perl-File-Compare-1.100.700-495.fc38.noarch 438/647 Verifying : perl-File-Copy-2.39-495.fc38.noarch 439/647 Verifying : perl-File-Find-1.40-495.fc38.noarch 440/647 Verifying : perl-File-Path-2.18-490.fc38.noarch 441/647 Verifying : perl-File-Temp-1:0.231.100-490.fc38.noarch 442/647 Verifying : perl-File-stat-1.12-495.fc38.noarch 443/647 Verifying : perl-Getopt-Long-1:2.54-2.fc38.noarch 444/647 Verifying : perl-Getopt-Std-1.13-495.fc38.noarch 445/647 Verifying : perl-HTTP-Tiny-0.082-2.fc38.noarch 446/647 Verifying : perl-IO-1.50-495.fc38.x86_64 447/647 Verifying : perl-IPC-Open3-1.22-495.fc38.noarch 448/647 Verifying : perl-MIME-Base64-3.16-490.fc38.x86_64 449/647 Verifying : perl-POSIX-2.03-495.fc38.x86_64 450/647 Verifying : perl-PathTools-3.84-490.fc38.x86_64 451/647 Verifying : perl-Pod-Escapes-1:1.07-490.fc38.noarch 452/647 Verifying : perl-Pod-Perldoc-3.28.01-491.fc38.noarch 453/647 Verifying : perl-Pod-Simple-1:3.43-491.fc38.noarch 454/647 Verifying : perl-Pod-Usage-4:2.03-4.fc38.noarch 455/647 Verifying : perl-Scalar-List-Utils-5:1.63-490.fc38.x86_64 456/647 Verifying : perl-SelectSaver-1.02-495.fc38.noarch 457/647 Verifying : perl-Socket-4:2.036-2.fc38.x86_64 458/647 Verifying : perl-Storable-1:3.26-490.fc38.x86_64 459/647 Verifying : perl-Symbol-1.09-495.fc38.noarch 460/647 Verifying : perl-Term-ANSIColor-5.01-491.fc38.noarch 461/647 Verifying : perl-Term-Cap-1.18-1.fc39.noarch 462/647 Verifying : perl-Text-ParseWords-3.31-490.fc38.noarch 463/647 Verifying : perl-Text-Tabs+Wrap-2021.0814-490.fc38.noarch 464/647 Verifying : perl-Thread-Queue-3.14-490.fc38.noarch 465/647 Verifying : perl-Time-Local-2:1.300-490.fc38.noarch 466/647 Verifying : perl-constant-1.33-491.fc38.noarch 467/647 Verifying : perl-if-0.61.000-495.fc38.noarch 468/647 Verifying : perl-interpreter-4:5.36.0-495.fc38.x86_64 469/647 Verifying : perl-libs-4:5.36.0-495.fc38.x86_64 470/647 Verifying : perl-mro-1.26-495.fc38.x86_64 471/647 Verifying : perl-overload-1.35-495.fc38.noarch 472/647 Verifying : perl-overloading-0.02-495.fc38.noarch 473/647 Verifying : perl-parent-1:0.241-1.fc39.noarch 474/647 Verifying : perl-podlators-1:5.01-2.fc38.noarch 475/647 Verifying : perl-threads-1:2.27-490.fc38.x86_64 476/647 Verifying : perl-threads-shared-1.64-490.fc38.x86_64 477/647 Verifying : perl-vars-1.05-495.fc38.noarch 478/647 Verifying : pixman-0.42.2-1.fc39.x86_64 479/647 Verifying : poly2tri-0.0-26.20130501hg26242d0aa7b8.fc38.x86_ 480/647 Verifying : poppler-23.02.0-1.fc38.x86_64 481/647 Verifying : poppler-data-0.4.11-4.fc38.noarch 482/647 Verifying : poppler-glib-23.02.0-1.fc38.x86_64 483/647 Verifying : procps-ng-3.3.17-9.fc38.x86_64 484/647 Verifying : proj-9.2.0-1.fc39.x86_64 485/647 Verifying : proj-data-9.2.0-1.fc39.noarch 486/647 Verifying : proj-devel-9.2.0-1.fc39.x86_64 487/647 Verifying : pugixml-1.13-2.fc38.x86_64 488/647 Verifying : pugixml-devel-1.13-2.fc38.x86_64 489/647 Verifying : pulseaudio-libs-16.1-4.fc38.x86_64 490/647 Verifying : pyproject-rpm-macros-1.6.3-1.fc39.noarch 491/647 Verifying : pyside2-tools-1:5.15.7-2.fc38.x86_64 492/647 Verifying : python-pip-wheel-23.0.1-1.fc39.noarch 493/647 Verifying : python-rpm-macros-3.11-10.fc39.noarch 494/647 Verifying : python-setuptools-wheel-65.5.1-2.fc38.noarch 495/647 Verifying : python3-3.11.2-1.fc39.x86_64 496/647 Verifying : python3-appdirs-1.4.4-8.fc38.noarch 497/647 Verifying : python3-brotli-1.0.9-11.fc38.x86_64 498/647 Verifying : python3-cairo-1.23.0-2.fc38.x86_64 499/647 Verifying : python3-contourpy-1.0.7-2.fc38.x86_64 500/647 Verifying : python3-cycler-0.11.0-7.fc38.noarch 501/647 Verifying : python3-dateutil-1:2.8.2-6.fc39.noarch 502/647 Verifying : python3-devel-3.11.2-1.fc39.x86_64 503/647 Verifying : python3-fonttools-4.39.2-1.fc39.x86_64 504/647 Verifying : python3-fs-2.4.16-1.fc39.noarch 505/647 Verifying : python3-kiwisolver-1.4.4-7.fc38.x86_64 506/647 Verifying : python3-libs-3.11.2-1.fc39.x86_64 507/647 Verifying : python3-lxml-4.9.2-2.fc38.x86_64 508/647 Verifying : python3-matplotlib-3.7.1-1.fc39.x86_64 509/647 Verifying : python3-matplotlib-data-3.7.1-1.fc39.noarch 510/647 Verifying : python3-matplotlib-data-fonts-3.7.1-1.fc39.noarc 511/647 Verifying : python3-matplotlib-tk-3.7.1-1.fc39.x86_64 512/647 Verifying : python3-munkres-1.1.2-14.fc38.noarch 513/647 Verifying : python3-numpy-1:1.24.1-3.fc39.x86_64 514/647 Verifying : python3-numpy-f2py-1:1.24.1-3.fc39.x86_64 515/647 Verifying : python3-olefile-0.46-19.fc38.noarch 516/647 Verifying : python3-packaging-23.0-1.fc38.noarch 517/647 Verifying : python3-pillow-9.4.0-3.fc39.x86_64 518/647 Verifying : python3-pillow-tk-9.4.0-3.fc39.x86_64 519/647 Verifying : python3-pivy-0.6.8-2.fc38.x86_64 520/647 Verifying : python3-pycxx-devel-7.1.7-4.fc38.noarch 521/647 Verifying : python3-pyparsing-3.0.9-3.fc38.noarch 522/647 Verifying : python3-pyside2-1:5.15.7-2.fc38.x86_64 523/647 Verifying : python3-pyside2-devel-1:5.15.7-2.fc38.x86_64 524/647 Verifying : python3-rpm-generators-14-3.fc39.noarch 525/647 Verifying : python3-rpm-macros-3.11-10.fc39.noarch 526/647 Verifying : python3-scipy-1.10.1-2.fc39.x86_64 527/647 Verifying : python3-setuptools-65.5.1-2.fc38.noarch 528/647 Verifying : python3-shiboken2-1:5.15.7-2.fc38.x86_64 529/647 Verifying : python3-shiboken2-devel-1:5.15.7-2.fc38.x86_64 530/647 Verifying : python3-six-1.16.0-9.fc38.noarch 531/647 Verifying : python3-tkinter-3.11.2-1.fc39.x86_64 532/647 Verifying : python3-vtk-9.2.6-2.fc39.x86_64 533/647 Verifying : qt-settings-38.2-2.fc39.noarch 534/647 Verifying : qt5-designer-5.15.8-2.fc38.x86_64 535/647 Verifying : qt5-doctools-5.15.8-2.fc38.x86_64 536/647 Verifying : qt5-linguist-5.15.8-2.fc38.x86_64 537/647 Verifying : qt5-qt3d-5.15.8-2.fc38.x86_64 538/647 Verifying : qt5-qtbase-5.15.8-7.fc39.x86_64 539/647 Verifying : qt5-qtbase-common-5.15.8-7.fc39.noarch 540/647 Verifying : qt5-qtbase-devel-5.15.8-7.fc39.x86_64 541/647 Verifying : qt5-qtbase-gui-5.15.8-7.fc39.x86_64 542/647 Verifying : qt5-qtcharts-5.15.8-2.fc38.x86_64 543/647 Verifying : qt5-qtdatavis3d-5.15.8-2.fc38.x86_64 544/647 Verifying : qt5-qtdeclarative-5.15.8-4.fc39.x86_64 545/647 Verifying : qt5-qtdeclarative-devel-5.15.8-4.fc39.x86_64 546/647 Verifying : qt5-qtgraphicaleffects-5.15.8-2.fc38.x86_64 547/647 Verifying : qt5-qtimageformats-5.15.8-2.fc38.x86_64 548/647 Verifying : qt5-qtlocation-5.15.8-4.fc39.x86_64 549/647 Verifying : qt5-qtlocation-devel-5.15.8-4.fc39.x86_64 550/647 Verifying : qt5-qtmultimedia-5.15.8-2.fc38.x86_64 551/647 Verifying : qt5-qtquickcontrols2-5.15.8-2.fc38.x86_64 552/647 Verifying : qt5-qtremoteobjects-5.15.8-1.fc38.x86_64 553/647 Verifying : qt5-qtscript-5.15.8-2.fc38.x86_64 554/647 Verifying : qt5-qtscxml-5.15.8-2.fc38.x86_64 555/647 Verifying : qt5-qtsensors-5.15.8-2.fc38.x86_64 556/647 Verifying : qt5-qtserialport-5.15.8-2.fc38.x86_64 557/647 Verifying : qt5-qtspeech-5.15.8-2.fc38.x86_64 558/647 Verifying : qt5-qtsvg-5.15.8-2.fc38.x86_64 559/647 Verifying : qt5-qtsvg-devel-5.15.8-2.fc38.x86_64 560/647 Verifying : qt5-qttools-5.15.8-2.fc38.x86_64 561/647 Verifying : qt5-qttools-common-5.15.8-2.fc38.noarch 562/647 Verifying : qt5-qttools-devel-5.15.8-2.fc38.x86_64 563/647 Verifying : qt5-qttools-libs-designer-5.15.8-2.fc38.x86_64 564/647 Verifying : qt5-qttools-libs-designercomponents-5.15.8-2.fc3 565/647 Verifying : qt5-qttools-libs-help-5.15.8-2.fc38.x86_64 566/647 Verifying : qt5-qttools-static-5.15.8-2.fc38.x86_64 567/647 Verifying : qt5-qtwebchannel-5.15.8-2.fc38.x86_64 568/647 Verifying : qt5-qtwebchannel-devel-5.15.8-2.fc38.x86_64 569/647 Verifying : qt5-qtwebengine-5.15.12-4.fc39.x86_64 570/647 Verifying : qt5-qtwebengine-devel-5.15.12-4.fc39.x86_64 571/647 Verifying : qt5-qtwebengine-devtools-5.15.12-4.fc39.x86_64 572/647 Verifying : qt5-qtwebkit-5.212.0-0.74alpha4.fc39.x86_64 573/647 Verifying : qt5-qtwebkit-devel-5.212.0-0.74alpha4.fc39.x86_6 574/647 Verifying : qt5-qtwebsockets-5.15.8-2.fc38.x86_64 575/647 Verifying : qt5-qtx11extras-5.15.8-2.fc38.x86_64 576/647 Verifying : qt5-qtx11extras-devel-5.15.8-2.fc38.x86_64 577/647 Verifying : qt5-qtxmlpatterns-5.15.8-2.fc38.x86_64 578/647 Verifying : qt5-qtxmlpatterns-devel-5.15.8-2.fc38.x86_64 579/647 Verifying : qt5-rpm-macros-5.15.8-2.fc38.noarch 580/647 Verifying : rav1e-libs-0.5.1-9.fc39.x86_64 581/647 Verifying : re2-1:20220601-2.fc38.x86_64 582/647 Verifying : rhash-1.4.3-2.fc38.x86_64 583/647 Verifying : rpm-mpi-hooks-8-5.fc38.noarch 584/647 Verifying : serd-0.30.16-1.fc38.x86_64 585/647 Verifying : shared-mime-info-2.2-3.fc38.x86_64 586/647 Verifying : shiboken2-1:5.15.7-2.fc38.x86_64 587/647 Verifying : snappy-1.1.10-1.fc39.x86_64 588/647 Verifying : sord-0.16.14-1.fc38.x86_64 589/647 Verifying : soundtouch-2.3.1-4.fc38.x86_64 590/647 Verifying : sqlite-3.40.1-2.fc38.x86_64 591/647 Verifying : sqlite-devel-3.40.1-2.fc38.x86_64 592/647 Verifying : sratom-0.6.10-3.fc38.x86_64 593/647 Verifying : svt-av1-libs-1.4.1-2.fc38.x86_64 594/647 Verifying : swig-4.1.1-4.fc38.x86_64 595/647 Verifying : sysprof-capture-devel-3.48.0-1.fc39.x86_64 596/647 Verifying : tbb-2020.3-16.fc39.x86_64 597/647 Verifying : tbb-devel-2020.3-16.fc39.x86_64 598/647 Verifying : tcl-1:8.6.12-4.fc38.x86_64 599/647 Verifying : tcl-devel-1:8.6.12-4.fc38.x86_64 600/647 Verifying : tk-1:8.6.12-4.fc38.x86_64 601/647 Verifying : tk-devel-1:8.6.12-4.fc38.x86_64 602/647 Verifying : ttmkfdir-3.0.9-67.fc38.x86_64 603/647 Verifying : tzdata-java-2022g-2.fc38.noarch 604/647 Verifying : unixODBC-2.3.11-2.fc38.x86_64 605/647 Verifying : uriparser-0.9.7-2.fc38.x86_64 606/647 Verifying : urw-base35-bookman-fonts-20200910-16.fc38.noarch 607/647 Verifying : urw-base35-c059-fonts-20200910-16.fc38.noarch 608/647 Verifying : urw-base35-d050000l-fonts-20200910-16.fc38.noarc 609/647 Verifying : urw-base35-fonts-20200910-16.fc38.noarch 610/647 Verifying : urw-base35-fonts-common-20200910-16.fc38.noarch 611/647 Verifying : urw-base35-gothic-fonts-20200910-16.fc38.noarch 612/647 Verifying : urw-base35-nimbus-mono-ps-fonts-20200910-16.fc38 613/647 Verifying : urw-base35-nimbus-roman-fonts-20200910-16.fc38.n 614/647 Verifying : urw-base35-nimbus-sans-fonts-20200910-16.fc38.no 615/647 Verifying : urw-base35-p052-fonts-20200910-16.fc38.noarch 616/647 Verifying : urw-base35-standard-symbols-ps-fonts-20200910-16 617/647 Verifying : urw-base35-z003-fonts-20200910-16.fc38.noarch 618/647 Verifying : utf8cpp-devel-3.2.3-2.fc38.noarch 619/647 Verifying : vim-filesystem-2:9.0.1407-1.fc39.noarch 620/647 Verifying : vtk-9.2.6-2.fc39.x86_64 621/647 Verifying : vtk-devel-9.2.6-2.fc39.x86_64 622/647 Verifying : vtk-java-9.2.6-2.fc39.x86_64 623/647 Verifying : vtk-qt-9.2.6-2.fc39.x86_64 624/647 Verifying : vulkan-headers-1.3.239.0-2.fc38.noarch 625/647 Verifying : vulkan-loader-1.3.239.0-1.fc38.x86_64 626/647 Verifying : vulkan-loader-devel-1.3.239.0-1.fc38.x86_64 627/647 Verifying : webrtc-audio-processing-0.3.1-10.fc38.x86_64 628/647 Verifying : woff2-1.0.2-17.fc38.x86_64 629/647 Verifying : xapian-core-libs-1.4.20-3.fc39.x86_64 630/647 Verifying : xcb-util-0.4.1-2.fc38.x86_64 631/647 Verifying : xcb-util-image-0.4.1-2.fc38.x86_64 632/647 Verifying : xcb-util-keysyms-0.4.1-2.fc38.x86_64 633/647 Verifying : xcb-util-renderutil-0.3.10-2.fc38.x86_64 634/647 Verifying : xcb-util-wm-0.4.2-2.fc38.x86_64 635/647 Verifying : xerces-c-3.2.3-8.fc38.x86_64 636/647 Verifying : xerces-c-devel-3.2.3-8.fc38.x86_64 637/647 Verifying : xkeyboard-config-2.38-1.fc38.noarch 638/647 Verifying : xml-common-0.6.3-60.fc38.noarch 639/647 Verifying : xorg-x11-fonts-ISO8859-1-100dpi-7.5-35.fc38.noar 640/647 Verifying : xorg-x11-fonts-Type1-7.5-35.fc38.noarch 641/647 Verifying : xorg-x11-proto-devel-2022.2-3.fc38.noarch 642/647 Verifying : xprop-1.2.5-3.fc38.x86_64 643/647 Verifying : xz-devel-5.4.1-1.fc38.x86_64 644/647 Verifying : zipios++-0.1.5.9-30.fc38.x86_64 645/647 Verifying : zipios++-devel-0.1.5.9-30.fc38.x86_64 646/647 Verifying : zlib-devel-1.2.13-3.fc38.x86_64 647/647 Installed: Coin4-4.0.0-12.fc38.x86_64 Coin4-devel-4.0.0-12.fc38.x86_64 LibRaw-0.21.1-3.fc39.x86_64 Lmod-8.7.20-1.fc39.x86_64 PEGTL-devel-2.8.3-6.fc38.x86_64 SoQt-1.6.0-12.fc38.x86_64 SuperLU-5.3.0-5.fc39.x86_64 adobe-mappings-cmap-20230118-1.fc38.noarch adobe-mappings-cmap-deprecated-20230118-1.fc38.noarch adobe-mappings-pdf-20190401-3.fc38.noarch adwaita-cursor-theme-44.0-1.fc39.noarch adwaita-icon-theme-44.0-1.fc39.noarch alsa-lib-1.2.8-3.fc38.x86_64 annobin-docs-11.14-1.fc39.noarch annobin-plugin-gcc-11.14-1.fc39.x86_64 armadillo-10.8.2-3.fc38.x86_64 arpack-3.8.0-6.fc38.x86_64 assimp-5.0.1-10.fc38.x86_64 at-spi2-atk-2.48.0-1.fc39.x86_64 at-spi2-core-2.48.0-1.fc39.x86_64 atk-2.48.0-1.fc39.x86_64 autoconf-2.71-5.fc38.noarch automake-1.16.5-12.fc39.noarch avahi-libs-0.8-20.fc38.x86_64 blas-3.11.0-2.fc38.x86_64 blas-devel-3.11.0-2.fc38.x86_64 blas64-3.11.0-2.fc38.x86_64 blas64_-3.11.0-2.fc38.x86_64 blosc-1.21.2-2.fc38.x86_64 boost-1.81.0-1.fc39.x86_64 boost-atomic-1.81.0-1.fc39.x86_64 boost-chrono-1.81.0-1.fc39.x86_64 boost-container-1.81.0-1.fc39.x86_64 boost-context-1.81.0-1.fc39.x86_64 boost-contract-1.81.0-1.fc39.x86_64 boost-coroutine-1.81.0-1.fc39.x86_64 boost-date-time-1.81.0-1.fc39.x86_64 boost-devel-1.81.0-1.fc39.x86_64 boost-fiber-1.81.0-1.fc39.x86_64 boost-filesystem-1.81.0-1.fc39.x86_64 boost-graph-1.81.0-1.fc39.x86_64 boost-iostreams-1.81.0-1.fc39.x86_64 boost-json-1.81.0-1.fc39.x86_64 boost-locale-1.81.0-1.fc39.x86_64 boost-log-1.81.0-1.fc39.x86_64 boost-math-1.81.0-1.fc39.x86_64 boost-nowide-1.81.0-1.fc39.x86_64 boost-numpy3-1.81.0-1.fc39.x86_64 boost-program-options-1.81.0-1.fc39.x86_64 boost-python3-1.81.0-1.fc39.x86_64 boost-random-1.81.0-1.fc39.x86_64 boost-regex-1.81.0-1.fc39.x86_64 boost-serialization-1.81.0-1.fc39.x86_64 boost-stacktrace-1.81.0-1.fc39.x86_64 boost-system-1.81.0-1.fc39.x86_64 boost-test-1.81.0-1.fc39.x86_64 boost-thread-1.81.0-1.fc39.x86_64 boost-timer-1.81.0-1.fc39.x86_64 boost-type_erasure-1.81.0-1.fc39.x86_64 boost-wave-1.81.0-1.fc39.x86_64 brotli-1.0.9-11.fc38.x86_64 brotli-devel-1.0.9-11.fc38.x86_64 bzip2-devel-1.0.8-13.fc38.x86_64 cairo-1.17.8-3.fc39.x86_64 cairo-gobject-1.17.8-3.fc39.x86_64 cdparanoia-libs-10.2-41.fc38.x86_64 cfitsio-4.2.0-3.fc38.x86_64 cgnslib-4.3.0-7.fc38.x86_64 cgnslib-common-4.3.0-7.fc38.noarch cgnslib-devel-4.3.0-7.fc38.x86_64 cgnslib-libs-4.3.0-7.fc38.x86_64 clang-libs-15.0.7-2.fc38.x86_64 clang-resource-filesystem-15.0.7-2.fc38.x86_64 cli11-devel-2.3.2-3.fc39.noarch cmake-3.26.0-1.fc39.x86_64 cmake-data-3.26.0-1.fc39.noarch cmake-filesystem-3.26.0-1.fc39.x86_64 cmake-rpm-macros-3.26.0-1.fc39.noarch colord-libs-1.4.6-2.fc37.x86_64 copy-jdk-configs-4.1-2.fc38.noarch cpp-13.0.1-0.8.fc39.x86_64 crypto-policies-scripts-20230301-1.gita12f7b2.fc39.noarch cups-libs-1:2.4.2-10.fc39.x86_64 dbus-1:1.14.6-1.fc38.x86_64 dbus-broker-33-1.fc38.x86_64 dbus-common-1:1.14.6-1.fc38.noarch dbus-libs-1:1.14.6-1.fc38.x86_64 dejavu-sans-fonts-2.37-20.fc38.noarch desktop-file-utils-0.26-8.fc38.x86_64 dos2unix-7.4.4-2.fc39.x86_64 double-conversion-3.1.5-8.fc38.x86_64 double-conversion-devel-3.1.5-8.fc38.x86_64 doxygen-2:1.9.6-7.fc39.x86_64 eigen3-devel-3.4.0-9.fc38.noarch emacs-filesystem-1:28.2-4.fc38.noarch expat-2.5.0-2.fc38.x86_64 expat-devel-2.5.0-2.fc38.x86_64 fdk-aac-free-2.0.0-10.fc38.x86_64 flac-libs-1.4.2-2.fc38.x86_64 flexiblas-3.3.0-2.fc38.x86_64 flexiblas-devel-3.3.0-2.fc38.x86_64 flexiblas-netlib-3.3.0-2.fc38.x86_64 flexiblas-netlib64-3.3.0-2.fc38.x86_64 flexiblas-openblas-openmp-3.3.0-2.fc38.x86_64 flexiblas-openblas-openmp64-3.3.0-2.fc38.x86_64 fontconfig-2.14.2-1.fc38.x86_64 fontconfig-devel-2.14.2-1.fc38.x86_64 fonts-filesystem-1:2.0.5-11.fc38.noarch freeimage-3.19.0-0.13.svn1889.fc38.x86_64 freeimage-devel-3.19.0-0.13.svn1889.fc38.x86_64 freetype-2.13.0-1.fc39.x86_64 freetype-devel-2.13.0-1.fc39.x86_64 freexl-1.0.6-21.fc38.x86_64 fribidi-1.0.12-4.fc39.x86_64 gc-8.2.2-3.fc38.x86_64 gcc-13.0.1-0.8.fc39.x86_64 gcc-c++-13.0.1-0.8.fc39.x86_64 gcc-gfortran-13.0.1-0.8.fc39.x86_64 gcc-plugin-annobin-13.0.1-0.8.fc39.x86_64 gd-2.3.3-11.fc39.x86_64 gdal-devel-3.6.3-1.fc39.x86_64 gdal-libs-3.6.3-1.fc39.x86_64 gdk-pixbuf2-2.42.10-2.fc38.x86_64 gdk-pixbuf2-modules-2.42.10-2.fc38.x86_64 geos-3.11.2-1.fc39.x86_64 gettext-0.21.1-2.fc38.x86_64 gettext-envsubst-0.21.1-2.fc38.x86_64 gettext-libs-0.21.1-2.fc38.x86_64 gettext-runtime-0.21.1-2.fc38.x86_64 giflib-5.2.1-15.fc38.x86_64 gl-manpages-1.1-26.20190306.fc38.noarch gl2ps-1.4.2-7.fc38.x86_64 gl2ps-devel-1.4.2-7.fc38.x86_64 glew-devel-2.2.0-4.fc38.x86_64 glib2-2.76.0-1.fc39.x86_64 glib2-devel-2.76.0-1.fc39.x86_64 glibc-devel-2.37.9000-3.fc39.x86_64 glibc-headers-x86-2.37.9000-3.fc39.noarch glx-utils-8.5.0-1.fc38.x86_64 gnutls-3.8.0-3.fc39.x86_64 google-droid-sans-fonts-20200215-14.fc38.noarch google-noto-fonts-common-20230201-1.fc38.noarch google-noto-sans-vf-fonts-20230201-1.fc38.noarch graphene-1.10.6-5.fc38.x86_64 graphite2-1.3.14-11.fc38.x86_64 graphite2-devel-1.3.14-11.fc38.x86_64 graphviz-7.1.0-2.fc38.x86_64 groff-base-1.22.4-11.fc38.x86_64 gsm-1.0.22-2.fc38.x86_64 gssdp-1.6.2-2.fc38.x86_64 gstreamer1-1.22.1-1.fc39.x86_64 gstreamer1-plugins-bad-free-1.22.1-1.fc39.x86_64 gstreamer1-plugins-base-1.22.1-1.fc39.x86_64 gtk-update-icon-cache-3.24.37-1.fc39.x86_64 gtk3-3.24.37-1.fc39.x86_64 gts-0.7.6-44.20121130.fc38.x86_64 guile22-2.2.7-8.fc39.x86_64 gupnp-1.6.3-2.fc38.x86_64 gupnp-igd-1.2.0-8.fc38.x86_64 harfbuzz-7.1.0-1.fc39.x86_64 harfbuzz-devel-7.1.0-1.fc39.x86_64 harfbuzz-icu-7.1.0-1.fc39.x86_64 hdf-libs-4.2.15-12.fc38.x86_64 hdf5-1.12.1-11.fc38.x86_64 hdf5-devel-1.12.1-11.fc38.x86_64 hdf5-mpich-1.12.1-11.fc38.x86_64 hdf5-mpich-devel-1.12.1-11.fc38.x86_64 hicolor-icon-theme-0.17-15.fc38.noarch highway-1.0.4-1.fc39.x86_64 hwdata-0.368-1.fc39.noarch hwloc-libs-2.9.0-6.fc39.x86_64 hyphen-2.8.8-20.fc39.x86_64 imath-3.1.6-3.fc39.x86_64 irrXML-1.8.5-4.fc38.x86_64 iso-codes-4.13.0-1.fc39.noarch jasper-libs-3.0.6-2.fc38.x86_64 java-17-openjdk-1:17.0.6.0.10-4.fc39.x86_64 java-17-openjdk-headless-1:17.0.6.0.10-4.fc39.x86_64 javapackages-filesystem-6.1.0-8.fc39.noarch jbig2dec-libs-0.19-8.fc38.x86_64 jbigkit-libs-2.1-25.fc38.x86_64 json-c-0.16-4.fc38.x86_64 json-devel-3.11.2-2.fc39.x86_64 json-glib-1.6.6-4.fc38.x86_64 jsoncpp-1.9.5-4.fc38.x86_64 jsoncpp-devel-1.9.5-4.fc38.x86_64 jxrlib-1.1-24.fc38.x86_64 kernel-headers-6.3.0-0.rc3.git0.1.fc39.x86_64 lame-libs-3.100-14.fc38.x86_64 langpacks-core-font-en-3.0-31.fc38.noarch lapack-3.11.0-2.fc38.x86_64 lapack-devel-3.11.0-2.fc38.x86_64 lapack64-3.11.0-2.fc38.x86_64 lapack64_-3.11.0-2.fc38.x86_64 lasi-1.1.3-10.fc38.x86_64 lcms2-2.15-1.fc39.x86_64 libGLEW-2.2.0-4.fc38.x86_64 libICE-1.0.10-10.fc38.x86_64 libICE-devel-1.0.10-10.fc38.x86_64 libSM-1.2.3-12.fc38.x86_64 libSM-devel-1.2.3-12.fc38.x86_64 libX11-1.8.4-1.fc38.x86_64 libX11-common-1.8.4-1.fc38.noarch libX11-devel-1.8.4-1.fc38.x86_64 libX11-xcb-1.8.4-1.fc38.x86_64 libXScrnSaver-1.2.3-12.fc38.x86_64 libXScrnSaver-devel-1.2.3-12.fc38.x86_64 libXau-1.0.11-2.fc38.x86_64 libXau-devel-1.0.11-2.fc38.x86_64 libXcomposite-0.4.5-9.fc38.x86_64 libXcomposite-devel-0.4.5-9.fc38.x86_64 libXcursor-1.2.1-3.fc38.x86_64 libXcursor-devel-1.2.1-3.fc38.x86_64 libXdamage-1.1.5-9.fc38.x86_64 libXdmcp-1.1.3-10.fc38.x86_64 libXdmcp-devel-1.1.3-10.fc38.x86_64 libXext-1.3.5-2.fc38.x86_64 libXext-devel-1.3.5-2.fc38.x86_64 libXfixes-6.0.0-5.fc38.x86_64 libXfixes-devel-6.0.0-5.fc38.x86_64 libXft-2.3.6-2.fc38.x86_64 libXft-devel-2.3.6-2.fc38.x86_64 libXi-1.8-4.fc38.x86_64 libXi-devel-1.8-4.fc38.x86_64 libXinerama-1.1.5-2.fc38.x86_64 libXinerama-devel-1.1.5-2.fc38.x86_64 libXmu-1.1.4-2.fc38.x86_64 libXmu-devel-1.1.4-2.fc38.x86_64 libXpm-3.5.15-3.fc38.x86_64 libXpm-devel-3.5.15-3.fc38.x86_64 libXrandr-1.5.2-10.fc38.x86_64 libXrandr-devel-1.5.2-10.fc38.x86_64 libXrender-0.9.11-2.fc38.x86_64 libXrender-devel-0.9.11-2.fc38.x86_64 libXres-1.2.1-4.fc38.x86_64 libXres-devel-1.2.1-4.fc38.x86_64 libXt-1.2.1-4.fc38.x86_64 libXt-devel-1.2.1-4.fc38.x86_64 libXtst-1.2.4-2.fc38.x86_64 libXtst-devel-1.2.4-2.fc38.x86_64 libXv-1.0.11-18.fc38.x86_64 libXv-devel-1.0.11-18.fc38.x86_64 libXxf86vm-1.1.5-2.fc38.x86_64 libaec-1.0.6-4.fc38.x86_64 libaec-devel-1.0.6-4.fc38.x86_64 libaom-3.6.0-1.fc39.x86_64 libappstream-glib-0.8.2-2.fc38.x86_64 libarchive-devel-3.6.1-5.fc39.x86_64 libasyncns-0.8-24.fc38.x86_64 libavif-0.11.1-9.fc39.x86_64 libb2-0.98.1-8.fc38.x86_64 libblkid-devel-2.38.1-4.fc38.x86_64 libcloudproviders-0.3.1-7.fc38.x86_64 libcurl-devel-8.0.1-1.fc39.x86_64 libdatrie-0.2.13-5.fc38.x86_64 libdav1d-1.1.0-1.fc39.x86_64 libdrm-2.4.114-2.fc38.x86_64 libdrm-devel-2.4.114-2.fc38.x86_64 libdvdnav-6.1.1-5.fc38.x86_64 libdvdread-6.1.3-3.fc38.x86_64 libedit-3.1-45.20221030cvs.fc38.x86_64 libepoxy-1.5.10-3.fc38.x86_64 libevdev-1.13.0-2.fc38.x86_64 libffi-devel-3.4.4-2.fc38.x86_64 libfontenc-1.1.6-2.fc38.x86_64 libgeotiff-1.7.1-7.fc39.x86_64 libgfortran-13.0.1-0.8.fc39.x86_64 libglvnd-1:1.6.0-2.fc38.x86_64 libglvnd-core-devel-1:1.6.0-2.fc38.x86_64 libglvnd-devel-1:1.6.0-2.fc38.x86_64 libglvnd-egl-1:1.6.0-2.fc38.x86_64 libglvnd-gles-1:1.6.0-2.fc38.x86_64 libglvnd-glx-1:1.6.0-2.fc38.x86_64 libglvnd-opengl-1:1.6.0-2.fc38.x86_64 libgs-10.0.0-4.fc39.x86_64 libgta-1.2.1-9.fc38.x86_64 libgudev-237-4.fc38.x86_64 libgusb-0.4.5-1.fc38.x86_64 libharu-2.4.3-2.fc38.x86_64 libharu-devel-2.4.3-2.fc38.x86_64 libicu-72.1-2.fc38.x86_64 libicu-devel-72.1-2.fc38.x86_64 libijs-0.35-17.fc38.x86_64 libimagequant-4.0.1-4.fc39.x86_64 libinput-1.22.1-2.fc38.x86_64 libjpeg-turbo-2.1.4-2.fc38.x86_64 libjpeg-turbo-devel-2.1.4-2.fc38.x86_64 libjxl-1:0.7.0-6.fc38.x86_64 libkdtree++-devel-0.7.0-34.fc38.noarch libkml-1.3.0-43.fc38.x86_64 liblerc-4.0.0-3.fc38.x86_64 libmng-2.0.3-18.fc39.x86_64 libmount-devel-2.38.1-4.fc38.x86_64 libmpc-1.3.1-2.fc38.x86_64 libnice-0.1.21-3.fc38.x86_64 libogg-2:1.3.5-5.fc38.x86_64 libogg-devel-2:1.3.5-5.fc38.x86_64 libpaper-1:2.0.10-1.fc39.x86_64 libpciaccess-0.16-8.fc38.x86_64 libpciaccess-devel-0.16-8.fc38.x86_64 libpng-2:1.6.37-14.fc38.x86_64 libpng-devel-2:1.6.37-14.fc38.x86_64 libpq-15.0-3.fc38.x86_64 libpq-devel-15.0-3.fc38.x86_64 libproxy-0.4.18-5.fc38.x86_64 libqhull_r-1:7.2.1-12.fc38.x86_64 libquadmath-13.0.1-0.8.fc39.x86_64 libquadmath-devel-13.0.1-0.8.fc39.x86_64 libraqm-0.8.0-4.fc38.x86_64 librsvg2-2.55.90-1.fc39.x86_64 librttopo-1.1.0-11.fc38.x86_64 libselinux-devel-3.5-1.fc39.x86_64 libsepol-devel-3.5-1.fc39.x86_64 libsndfile-1.1.0-6.fc38.x86_64 libsoup3-3.4.0-2.fc39.x86_64 libspatialite-5.0.1-21.fc39.x86_64 libspnav-1.0-3.fc38.x86_64 libspnav-devel-1.0-3.fc38.x86_64 libsrtp-2.3.0-10.fc38.x86_64 libstdc++-devel-13.0.1-0.8.fc39.x86_64 libstemmer-2.2.0-5.fc38.x86_64 libthai-0.1.29-4.fc38.x86_64 libtheora-1:1.1.1-33.fc38.x86_64 libtheora-devel-1:1.1.1-33.fc38.x86_64 libtiff-4.4.0-5.fc38.x86_64 libtiff-devel-4.4.0-5.fc38.x86_64 libtool-ltdl-2.4.7-6.fc38.x86_64 libtracker-sparql-3.5.0-1.fc39.x86_64 libunistring-1.1-3.fc38.x86_64 libunwind-1.7.0-0.1.rc2.fc39.x86_64 libusb1-1.0.26-2.fc38.x86_64 libuv-1:1.44.2-3.fc38.x86_64 libva-2.17.0-2.fc38.x86_64 libvisual-1:0.4.0-38.fc38.x86_64 libvmaf-2.3.0-5.fc38.x86_64 libvorbis-1:1.3.7-7.fc38.x86_64 libvpx-1.13.0-2.fc39.x86_64 libwacom-2.6.0-1.fc38.x86_64 libwacom-data-2.6.0-1.fc38.noarch libwayland-client-1.21.0-2.fc38.x86_64 libwayland-cursor-1.21.0-2.fc38.x86_64 libwayland-egl-1.21.0-2.fc38.x86_64 libwayland-server-1.21.0-2.fc38.x86_64 libwebp-1.3.0-2.fc38.x86_64 libxcb-1.13.1-11.fc38.x86_64 libxcb-devel-1.13.1-11.fc38.x86_64 libxcrypt-devel-4.4.33-7.fc39.x86_64 libxkbcommon-1.5.0-2.fc38.x86_64 libxkbcommon-x11-1.5.0-2.fc38.x86_64 libxkbfile-1.1.1-2.fc38.x86_64 libxkbfile-devel-1.1.1-2.fc38.x86_64 libxml2-devel-2.10.3-3.fc38.x86_64 libxshmfence-1.3-12.fc38.x86_64 libxslt-1.1.37-3.fc39.x86_64 lilv-libs-0.24.14-4.fc38.x86_64 lksctp-tools-1.0.19-3.fc38.x86_64 llvm-libs-15.0.7-2.fc38.x86_64 lua-5.4.4-9.fc39.x86_64 lua-filesystem-1.8.0-8.fc38.x86_64 lua-json-1.3.4-3.fc38.noarch lua-lpeg-1.0.2-10.fc38.x86_64 lua-posix-36.1-1.fc39.x86_64 lua-term-0.07-17.fc38.x86_64 lz4-devel-1.9.4-2.fc38.x86_64 m4-1.4.19-4.fc37.x86_64 make-1:4.4-3.fc38.x86_64 mariadb-connector-c-3.2.7-3.fc38.x86_64 mariadb-connector-c-config-3.2.7-3.fc38.noarch mariadb-connector-c-devel-3.2.7-3.fc38.x86_64 med-4.1.0-11.fc38.x86_64 med-devel-4.1.0-11.fc38.x86_64 mesa-filesystem-23.0.0-1.fc39.x86_64 mesa-libEGL-23.0.0-1.fc39.x86_64 mesa-libEGL-devel-23.0.0-1.fc39.x86_64 mesa-libGL-23.0.0-1.fc39.x86_64 mesa-libGL-devel-23.0.0-1.fc39.x86_64 mesa-libGLU-9.0.1-8.fc38.x86_64 mesa-libGLU-devel-9.0.1-8.fc38.x86_64 mesa-libgbm-23.0.0-1.fc39.x86_64 mesa-libglapi-23.0.0-1.fc39.x86_64 minizip-ng-3.0.7-3.fc38.x86_64 mkfontscale-1.2.2-3.fc38.x86_64 mpdecimal-2.5.1-6.fc38.x86_64 mpg123-libs-1.31.3-1.fc39.x86_64 mpich-4.0.3-1.fc39.x86_64 mpich-devel-4.0.3-1.fc39.x86_64 mtdev-1.1.6-5.fc38.x86_64 ncurses-6.4-3.20230114.fc38.x86_64 netcdf-4.9.2-1.fc39.x86_64 netcdf-cxx-4.2-31.fc38.x86_64 netcdf-cxx-devel-4.2-31.fc38.x86_64 netcdf-devel-4.9.2-1.fc39.x86_64 netcdf-mpich-4.9.2-1.fc39.x86_64 netcdf-mpich-devel-4.9.2-1.fc39.x86_64 netpbm-11.01.00-2.fc38.x86_64 nettle-3.8-3.fc38.x86_64 nspr-4.35.0-5.fc39.x86_64 nss-3.88.1-2.fc39.x86_64 nss-softokn-3.88.1-2.fc39.x86_64 nss-softokn-freebl-3.88.1-2.fc39.x86_64 nss-sysinit-3.88.1-2.fc39.x86_64 nss-util-3.88.1-2.fc39.x86_64 ogdi-4.1.0-10.fc38.x86_64 openal-soft-1.23.0-1.fc38.x86_64 openblas-0.3.21-4.fc38.x86_64 openblas-openmp-0.3.21-4.fc38.x86_64 openblas-openmp64-0.3.21-4.fc38.x86_64 opencascade-devel-7.6.3-3.fc38.x86_64 opencascade-draw-7.6.3-3.fc38.x86_64 opencascade-foundation-7.6.3-3.fc38.x86_64 opencascade-modeling-7.6.3-3.fc38.x86_64 opencascade-ocaf-7.6.3-3.fc38.x86_64 opencascade-visualization-7.6.3-3.fc38.x86_64 openexr-libs-3.1.6-1.fc39.x86_64 openjpeg2-2.5.0-3.fc38.x86_64 openslide-3.4.1-23.fc38.x86_64 openslide-devel-3.4.1-23.fc38.x86_64 openssl-devel-1:3.0.8-1.fc39.x86_64 opus-1.3.1-12.fc39.x86_64 orc-0.4.33-2.fc38.x86_64 pango-1.50.14-1.fc39.x86_64 pciutils-libs-3.9.0-3.fc38.x86_64 pcre-8.45-1.fc38.3.x86_64 pcre2-devel-10.42-1.fc38.1.x86_64 pcre2-utf16-10.42-1.fc38.1.x86_64 pcre2-utf32-10.42-1.fc38.1.x86_64 perl-B-1.83-495.fc38.x86_64 perl-Carp-1.52-490.fc38.noarch perl-Class-Struct-0.66-495.fc38.noarch perl-Data-Dumper-2.184-491.fc38.x86_64 perl-DynaLoader-1.52-495.fc38.x86_64 perl-Encode-4:3.19-493.fc38.x86_64 perl-English-1.11-495.fc38.noarch perl-Errno-1.36-495.fc38.x86_64 perl-Exporter-5.77-490.fc38.noarch perl-Fcntl-1.15-495.fc38.x86_64 perl-File-Basename-2.85-495.fc38.noarch perl-File-Compare-1.100.700-495.fc38.noarch perl-File-Copy-2.39-495.fc38.noarch perl-File-Find-1.40-495.fc38.noarch perl-File-Path-2.18-490.fc38.noarch perl-File-Temp-1:0.231.100-490.fc38.noarch perl-File-stat-1.12-495.fc38.noarch perl-Getopt-Long-1:2.54-2.fc38.noarch perl-Getopt-Std-1.13-495.fc38.noarch perl-HTTP-Tiny-0.082-2.fc38.noarch perl-IO-1.50-495.fc38.x86_64 perl-IPC-Open3-1.22-495.fc38.noarch perl-MIME-Base64-3.16-490.fc38.x86_64 perl-POSIX-2.03-495.fc38.x86_64 perl-PathTools-3.84-490.fc38.x86_64 perl-Pod-Escapes-1:1.07-490.fc38.noarch perl-Pod-Perldoc-3.28.01-491.fc38.noarch perl-Pod-Simple-1:3.43-491.fc38.noarch perl-Pod-Usage-4:2.03-4.fc38.noarch perl-Scalar-List-Utils-5:1.63-490.fc38.x86_64 perl-SelectSaver-1.02-495.fc38.noarch perl-Socket-4:2.036-2.fc38.x86_64 perl-Storable-1:3.26-490.fc38.x86_64 perl-Symbol-1.09-495.fc38.noarch perl-Term-ANSIColor-5.01-491.fc38.noarch perl-Term-Cap-1.18-1.fc39.noarch perl-Text-ParseWords-3.31-490.fc38.noarch perl-Text-Tabs+Wrap-2021.0814-490.fc38.noarch perl-Thread-Queue-3.14-490.fc38.noarch perl-Time-Local-2:1.300-490.fc38.noarch perl-constant-1.33-491.fc38.noarch perl-if-0.61.000-495.fc38.noarch perl-interpreter-4:5.36.0-495.fc38.x86_64 perl-libs-4:5.36.0-495.fc38.x86_64 perl-mro-1.26-495.fc38.x86_64 perl-overload-1.35-495.fc38.noarch perl-overloading-0.02-495.fc38.noarch perl-parent-1:0.241-1.fc39.noarch perl-podlators-1:5.01-2.fc38.noarch perl-threads-1:2.27-490.fc38.x86_64 perl-threads-shared-1.64-490.fc38.x86_64 perl-vars-1.05-495.fc38.noarch pixman-0.42.2-1.fc39.x86_64 poly2tri-0.0-26.20130501hg26242d0aa7b8.fc38.x86_64 poppler-23.02.0-1.fc38.x86_64 poppler-data-0.4.11-4.fc38.noarch poppler-glib-23.02.0-1.fc38.x86_64 procps-ng-3.3.17-9.fc38.x86_64 proj-9.2.0-1.fc39.x86_64 proj-data-9.2.0-1.fc39.noarch proj-devel-9.2.0-1.fc39.x86_64 pugixml-1.13-2.fc38.x86_64 pugixml-devel-1.13-2.fc38.x86_64 pulseaudio-libs-16.1-4.fc38.x86_64 pyproject-rpm-macros-1.6.3-1.fc39.noarch pyside2-tools-1:5.15.7-2.fc38.x86_64 python-pip-wheel-23.0.1-1.fc39.noarch python-rpm-macros-3.11-10.fc39.noarch python-setuptools-wheel-65.5.1-2.fc38.noarch python3-3.11.2-1.fc39.x86_64 python3-appdirs-1.4.4-8.fc38.noarch python3-brotli-1.0.9-11.fc38.x86_64 python3-cairo-1.23.0-2.fc38.x86_64 python3-contourpy-1.0.7-2.fc38.x86_64 python3-cycler-0.11.0-7.fc38.noarch python3-dateutil-1:2.8.2-6.fc39.noarch python3-devel-3.11.2-1.fc39.x86_64 python3-fonttools-4.39.2-1.fc39.x86_64 python3-fs-2.4.16-1.fc39.noarch python3-kiwisolver-1.4.4-7.fc38.x86_64 python3-libs-3.11.2-1.fc39.x86_64 python3-lxml-4.9.2-2.fc38.x86_64 python3-matplotlib-3.7.1-1.fc39.x86_64 python3-matplotlib-data-3.7.1-1.fc39.noarch python3-matplotlib-data-fonts-3.7.1-1.fc39.noarch python3-matplotlib-tk-3.7.1-1.fc39.x86_64 python3-munkres-1.1.2-14.fc38.noarch python3-numpy-1:1.24.1-3.fc39.x86_64 python3-numpy-f2py-1:1.24.1-3.fc39.x86_64 python3-olefile-0.46-19.fc38.noarch python3-packaging-23.0-1.fc38.noarch python3-pillow-9.4.0-3.fc39.x86_64 python3-pillow-tk-9.4.0-3.fc39.x86_64 python3-pivy-0.6.8-2.fc38.x86_64 python3-pycxx-devel-7.1.7-4.fc38.noarch python3-pyparsing-3.0.9-3.fc38.noarch python3-pyside2-1:5.15.7-2.fc38.x86_64 python3-pyside2-devel-1:5.15.7-2.fc38.x86_64 python3-rpm-generators-14-3.fc39.noarch python3-rpm-macros-3.11-10.fc39.noarch python3-scipy-1.10.1-2.fc39.x86_64 python3-setuptools-65.5.1-2.fc38.noarch python3-shiboken2-1:5.15.7-2.fc38.x86_64 python3-shiboken2-devel-1:5.15.7-2.fc38.x86_64 python3-six-1.16.0-9.fc38.noarch python3-tkinter-3.11.2-1.fc39.x86_64 python3-vtk-9.2.6-2.fc39.x86_64 qt-settings-38.2-2.fc39.noarch qt5-designer-5.15.8-2.fc38.x86_64 qt5-doctools-5.15.8-2.fc38.x86_64 qt5-linguist-5.15.8-2.fc38.x86_64 qt5-qt3d-5.15.8-2.fc38.x86_64 qt5-qtbase-5.15.8-7.fc39.x86_64 qt5-qtbase-common-5.15.8-7.fc39.noarch qt5-qtbase-devel-5.15.8-7.fc39.x86_64 qt5-qtbase-gui-5.15.8-7.fc39.x86_64 qt5-qtcharts-5.15.8-2.fc38.x86_64 qt5-qtdatavis3d-5.15.8-2.fc38.x86_64 qt5-qtdeclarative-5.15.8-4.fc39.x86_64 qt5-qtdeclarative-devel-5.15.8-4.fc39.x86_64 qt5-qtgraphicaleffects-5.15.8-2.fc38.x86_64 qt5-qtimageformats-5.15.8-2.fc38.x86_64 qt5-qtlocation-5.15.8-4.fc39.x86_64 qt5-qtlocation-devel-5.15.8-4.fc39.x86_64 qt5-qtmultimedia-5.15.8-2.fc38.x86_64 qt5-qtquickcontrols2-5.15.8-2.fc38.x86_64 qt5-qtremoteobjects-5.15.8-1.fc38.x86_64 qt5-qtscript-5.15.8-2.fc38.x86_64 qt5-qtscxml-5.15.8-2.fc38.x86_64 qt5-qtsensors-5.15.8-2.fc38.x86_64 qt5-qtserialport-5.15.8-2.fc38.x86_64 qt5-qtspeech-5.15.8-2.fc38.x86_64 qt5-qtsvg-5.15.8-2.fc38.x86_64 qt5-qtsvg-devel-5.15.8-2.fc38.x86_64 qt5-qttools-5.15.8-2.fc38.x86_64 qt5-qttools-common-5.15.8-2.fc38.noarch qt5-qttools-devel-5.15.8-2.fc38.x86_64 qt5-qttools-libs-designer-5.15.8-2.fc38.x86_64 qt5-qttools-libs-designercomponents-5.15.8-2.fc38.x86_64 qt5-qttools-libs-help-5.15.8-2.fc38.x86_64 qt5-qttools-static-5.15.8-2.fc38.x86_64 qt5-qtwebchannel-5.15.8-2.fc38.x86_64 qt5-qtwebchannel-devel-5.15.8-2.fc38.x86_64 qt5-qtwebengine-5.15.12-4.fc39.x86_64 qt5-qtwebengine-devel-5.15.12-4.fc39.x86_64 qt5-qtwebengine-devtools-5.15.12-4.fc39.x86_64 qt5-qtwebkit-5.212.0-0.74alpha4.fc39.x86_64 qt5-qtwebkit-devel-5.212.0-0.74alpha4.fc39.x86_64 qt5-qtwebsockets-5.15.8-2.fc38.x86_64 qt5-qtx11extras-5.15.8-2.fc38.x86_64 qt5-qtx11extras-devel-5.15.8-2.fc38.x86_64 qt5-qtxmlpatterns-5.15.8-2.fc38.x86_64 qt5-qtxmlpatterns-devel-5.15.8-2.fc38.x86_64 qt5-rpm-macros-5.15.8-2.fc38.noarch rav1e-libs-0.5.1-9.fc39.x86_64 re2-1:20220601-2.fc38.x86_64 rhash-1.4.3-2.fc38.x86_64 rpm-mpi-hooks-8-5.fc38.noarch serd-0.30.16-1.fc38.x86_64 shared-mime-info-2.2-3.fc38.x86_64 shiboken2-1:5.15.7-2.fc38.x86_64 snappy-1.1.10-1.fc39.x86_64 sord-0.16.14-1.fc38.x86_64 soundtouch-2.3.1-4.fc38.x86_64 sqlite-3.40.1-2.fc38.x86_64 sqlite-devel-3.40.1-2.fc38.x86_64 sratom-0.6.10-3.fc38.x86_64 svt-av1-libs-1.4.1-2.fc38.x86_64 swig-4.1.1-4.fc38.x86_64 sysprof-capture-devel-3.48.0-1.fc39.x86_64 tbb-2020.3-16.fc39.x86_64 tbb-devel-2020.3-16.fc39.x86_64 tcl-1:8.6.12-4.fc38.x86_64 tcl-devel-1:8.6.12-4.fc38.x86_64 tk-1:8.6.12-4.fc38.x86_64 tk-devel-1:8.6.12-4.fc38.x86_64 ttmkfdir-3.0.9-67.fc38.x86_64 tzdata-java-2022g-2.fc38.noarch unixODBC-2.3.11-2.fc38.x86_64 uriparser-0.9.7-2.fc38.x86_64 urw-base35-bookman-fonts-20200910-16.fc38.noarch urw-base35-c059-fonts-20200910-16.fc38.noarch urw-base35-d050000l-fonts-20200910-16.fc38.noarch urw-base35-fonts-20200910-16.fc38.noarch urw-base35-fonts-common-20200910-16.fc38.noarch urw-base35-gothic-fonts-20200910-16.fc38.noarch urw-base35-nimbus-mono-ps-fonts-20200910-16.fc38.noarch urw-base35-nimbus-roman-fonts-20200910-16.fc38.noarch urw-base35-nimbus-sans-fonts-20200910-16.fc38.noarch urw-base35-p052-fonts-20200910-16.fc38.noarch urw-base35-standard-symbols-ps-fonts-20200910-16.fc38.noarch urw-base35-z003-fonts-20200910-16.fc38.noarch utf8cpp-devel-3.2.3-2.fc38.noarch vim-filesystem-2:9.0.1407-1.fc39.noarch vtk-9.2.6-2.fc39.x86_64 vtk-devel-9.2.6-2.fc39.x86_64 vtk-java-9.2.6-2.fc39.x86_64 vtk-qt-9.2.6-2.fc39.x86_64 vulkan-headers-1.3.239.0-2.fc38.noarch vulkan-loader-1.3.239.0-1.fc38.x86_64 vulkan-loader-devel-1.3.239.0-1.fc38.x86_64 webrtc-audio-processing-0.3.1-10.fc38.x86_64 woff2-1.0.2-17.fc38.x86_64 xapian-core-libs-1.4.20-3.fc39.x86_64 xcb-util-0.4.1-2.fc38.x86_64 xcb-util-image-0.4.1-2.fc38.x86_64 xcb-util-keysyms-0.4.1-2.fc38.x86_64 xcb-util-renderutil-0.3.10-2.fc38.x86_64 xcb-util-wm-0.4.2-2.fc38.x86_64 xerces-c-3.2.3-8.fc38.x86_64 xerces-c-devel-3.2.3-8.fc38.x86_64 xkeyboard-config-2.38-1.fc38.noarch xml-common-0.6.3-60.fc38.noarch xorg-x11-fonts-ISO8859-1-100dpi-7.5-35.fc38.noarch xorg-x11-fonts-Type1-7.5-35.fc38.noarch xorg-x11-proto-devel-2022.2-3.fc38.noarch xprop-1.2.5-3.fc38.x86_64 xz-devel-5.4.1-1.fc38.x86_64 zipios++-0.1.5.9-30.fc38.x86_64 zipios++-devel-0.1.5.9-30.fc38.x86_64 zlib-devel-1.2.13-3.fc38.x86_64 Complete! Finish: build setup for freecad-0.20.2-4.fc39.src.rpm Start: rpmbuild freecad-0.20.2-4.fc39.src.rpm warning: Macro expanded in comment on line 17: (c=%{commit}; echo ${c:0:10}) Building target platforms: x86_64 Building for target x86_64 setting SOURCE_DATE_EPOCH=1676851200 Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.akEtUa + umask 022 + cd /builddir/build/BUILD + cd /builddir/build/BUILD + rm -rf FreeCAD-0.20.2 + /usr/lib/rpm/rpmuncompress -x /builddir/build/SOURCES/FreeCAD-0.20.2.tar.gz + STATUS=0 + '[' 0 -ne 0 ']' + cd FreeCAD-0.20.2 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + /usr/lib/rpm/rpmuncompress /builddir/build/SOURCES/freecad-unbundled-pycxx.patch + /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch -f + /usr/lib/rpm/rpmuncompress /builddir/build/SOURCES/freecad-cstdint.patch + /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch -f + rm -rf src/CXX + rm -rf src/zipios++ + dos2unix -k src/Mod/Test/unittestgui.py ChangeLog.txt data/License.txt dos2unix: converting file src/Mod/Test/unittestgui.py to Unix format... dos2unix: converting file ChangeLog.txt to Unix format... dos2unix: converting file data/License.txt to Unix format... + RPM_EC=0 ++ jobs -p + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.SRilCQ + umask 022 + cd /builddir/build/BUILD + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer ' + export CFLAGS + CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer ' + export CXXFLAGS + FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules ' + export FFLAGS + FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cforce-frame-pointers=yes -Clink-arg=-Wl,-z,relro -Clink-arg=-Wl,-z,now -Clink-arg=-specs=/usr/lib/rpm/redhat/redhat-package-notes --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes ' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib64: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd FreeCAD-0.20.2 + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer ' + export CFLAGS + CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer ' + export CXXFLAGS + FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules ' + export FFLAGS + FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cforce-frame-pointers=yes -Clink-arg=-Wl,-z,relro -Clink-arg=-Wl,-z,now -Clink-arg=-specs=/usr/lib/rpm/redhat/redhat-package-notes --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes ' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib64: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX ++ pkg-config --variable=includedir PyCXX ++ pkg-config --variable=srcdir PyCXX + /usr/bin/cmake -S . -B redhat-linux-build -DCMAKE_C_FLAGS_RELEASE:STRING=-DNDEBUG -DCMAKE_CXX_FLAGS_RELEASE:STRING=-DNDEBUG -DCMAKE_Fortran_FLAGS_RELEASE:STRING=-DNDEBUG -DCMAKE_VERBOSE_MAKEFILE:BOOL=ON -DCMAKE_INSTALL_DO_STRIP:BOOL=OFF -DCMAKE_INSTALL_PREFIX:PATH=/usr -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib64 -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DLIB_SUFFIX=64 -DBUILD_SHARED_LIBS:BOOL=ON -DCMAKE_CXX_STANDARD=17 -DCMAKE_INSTALL_PREFIX=/usr/lib64/freecad -DCMAKE_INSTALL_DATADIR=/usr/share/freecad -DCMAKE_INSTALL_DOCDIR=/usr/share/doc/freecad -DCMAKE_INSTALL_INCLUDEDIR=/usr/include -DRESOURCEDIR=/usr/share/freecad -DPYTHON_EXECUTABLE=/usr/bin/python3 -DPYSIDE_INCLUDE_DIR=/usr/include/PySide2 -DPYSIDE_LIBRARY=/usr/lib64/libpyside2.cpython-311-x86_64-linux-gnu.so -DSHIBOKEN_INCLUDE_DIR=/usr/include/shiboken2 -DSHIBOKEN_LIBRARY=/usr/lib64/libshiboken2.cpython-311-x86_64-linux-gnu.so -DBUILD_QT5=ON -DOpenGL_GL_PREFERENCE=LEGACY -DCOIN3D_INCLUDE_DIR=/usr/include/Coin4 -DCOIN3D_DOC_PATH=/usr/share/Coin4/Coin -DUSE_OCC=TRUE -DFREECAD_USE_EXTERNAL_ZIPIOS=TRUE -DPYCXX_INCLUDE_DIR=/usr/include -DPYCXX_SOURCE_DIR=/usr/src/CXX -DMEDFILE_INCLUDE_DIRS=/usr/include/med -- The C compiler identification is GNU 13.0.1 -- The CXX compiler identification is GNU 13.0.1 -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working C compiler: /usr/bin/gcc - skipped -- Detecting C compile features -- Detecting C compile features - done -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Check for working CXX compiler: /usr/bin/g++ - skipped -- Detecting CXX compile features -- Detecting CXX compile features - done -- Compiler: GNU, version: 13.0.1 -- Looking for GL/gl.h -- Looking for GL/gl.h - found -- Looking for C++ include istream -- Looking for C++ include istream - found -- Looking for C++ include ostream -- Looking for C++ include ostream - found -- Looking for C++ include fstream -- Looking for C++ include fstream - found -- Looking for C++ include sstream -- Looking for C++ include sstream - found -- Looking for C++ include ios -- Looking for C++ include ios - found -- Looking for C++ include iostream -- Looking for C++ include iostream - found -- Looking for C++ include iomanip -- Looking for C++ include iomanip - found -- Looking for C++ include iostream -- Looking for C++ include iostream - found -- Check for STD namespace -- Check for STD namespace - found -- prefix: /usr/lib64/freecad -- bindir: bin -- datadir: /usr/share/freecad -- docdir: /usr/share/doc/freecad -- includedir: /usr/include -- libdir: lib64 -- cmake: 3.26.0 -- Found Doxygen: /usr/bin/doxygen (found version "1.9.6") found components: doxygen dot -- Found Python3: /usr/bin/python3.11 (found version "3.11.2") found components: Interpreter Development Development.Module Development.Embed -- Found XercesC: /usr/lib64/libxerces-c.so (found version "3.2.3") -- Found ZLIB: /usr/lib64/libz.so (found version "1.2.13") -- PyCXX found: -- Headers: /usr/include -- Sources: /usr/src/CXX -- Version: 7.1.7 -- Found OCC: /usr/include/opencascade (found version "7.6.3") -- -- Found OCE/OpenCASCADE version: 7.6.3 -- -- OCE/OpenCASCADE include directory: /usr/include/opencascade -- -- OCE/OpenCASCADE shared libraries directory: /usr/lib64 -- Found OpenGL: /usr/lib64/libOpenGL.so -- Found OpenGLU: /usr/lib64/libGLU.so CMake Deprecation Warning at /usr/lib64/cmake/vtk/vtk-config.cmake:75 (message): The new name for the 'vtkCommonCore' component is 'CommonCore' Call Stack (most recent call first): cMake/FreeCAD_Helpers/SetupSalomeSMESH.cmake:29 (find_package) CMakeLists.txt:58 (SetupSalomeSMESH) -- Performing Test CMAKE_HAVE_LIBC_PTHREAD -- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success -- Found Threads: TRUE -- Found utf8cpp: /usr/include/utf8cpp -- VTK components: CommonCore;CommonDataModel;FiltersVerdict;IOXML;FiltersCore;FiltersGeneral;IOLegacy;FiltersExtraction;FiltersSources;FiltersGeometry;hdf5;FiltersParallelDIY2;RenderingCore;InteractionStyle;RenderingFreeType;RenderingOpenGL2 -- Found GLEW: /usr/lib64/libGLEW.so -- Found OpenGL: /usr/lib64/libOpenGL.so found components: OpenGL GLX -- Found HDF5: /usr/lib64/libhdf5.so (found version "1.12.1") found components: C HL -- Found Eigen3: /usr/include/eigen3 (found version "3.4.0") -- Found X11: /usr/include -- Looking for XOpenDisplay in /usr/lib64/libX11.so;/usr/lib64/libXext.so -- Looking for XOpenDisplay in /usr/lib64/libX11.so;/usr/lib64/libXext.so - found -- Looking for gethostbyname -- Looking for gethostbyname - found -- Looking for connect -- Looking for connect - found -- Looking for remove -- Looking for remove - found -- Looking for shmat -- Looking for shmat - found -- Looking for IceConnectionNumber in ICE -- Looking for IceConnectionNumber in ICE - found -- Found EXPAT: /usr/lib64/libexpat.so (found version "2.5.0") -- Found double-conversion: /usr/lib64/libdouble-conversion.so -- Found LZ4: /usr/lib64/liblz4.so (found version "1.9.4") -- Found LZMA: /usr/lib64/liblzma.so (found version "5.4.1") -- Found Freetype: /usr/lib64/libfreetype.so (found version "2.13.0") -- Check for medfile (libmed and libmedc) ... -- Found MEDFile: /usr/include/med -- Found PkgConfig: /usr/bin/pkg-config (found version "1.9.4") -- We guess that libmed was built using hdf5-serial version -- Checking for one of the modules 'hdf5-serial' -- Found HDF5: /usr/lib64/libhdf5.so (found version "1.12.1") -- Checking for one of the modules 'ompi-cxx' CMake Warning at cMake/FreeCAD_Helpers/SetupSalomeSMESH.cmake:115 (message): ompi-cxx was not found. Check for error above. Call Stack (most recent call first): CMakeLists.txt:58 (SetupSalomeSMESH) -- Found Boost: /usr/lib64/cmake/Boost-1.81.0/BoostConfig.cmake (found suitable version "1.81.0", minimum required is "1.55") found components: filesystem program_options regex system thread date_time -- Found SWIG: /usr/bin/swig (found version "4.1.1") -- Found Eigen3: /usr/include/eigen3 (found suitable version "3.4.0", minimum required is "2.91.0") -- Checking for module 'Coin' -- Found Coin, version 4.0.0 -- Coin3D libraries found -- Found Spnav: /usr/lib64/libspnav.so -- Shiboken2Config: Using default python: .cpython-311-x86_64-linux-gnu -- Found PythonInterp: /usr/bin/python3 (found suitable version "3.11.2", minimum required is "3") -- Found PythonLibs: /usr/lib64/libpython3.11.so (found suitable version "3.11.2", minimum required is "3") -- SHIBOKEN_PYTHON_INCLUDE_DIRS computed to value: '/usr/include/python3.11' -- SHIBOKEN_PYTHON_LIBRARIES computed to value: '' -- libshiboken built for Release -- PYTHON_CONFIG_SUFFIX: .cpython-311-x86_64-linux-gnu -- libshiboken built for Release -- PySide2 Python module found at /usr/lib64/python3.11/site-packages/PySide2. -- Found Matplotlib: /usr/lib64/python3.11/site-packages/matplotlib (found version "3.7.1") -- Platform is 64-bit, set -D_OCC64 -- Performing Test _flag_found -- Performing Test _flag_found - Success -- Performing Test _flag_found -- Performing Test _flag_found - Success -- Performing Test _flag_found -- Performing Test _flag_found - Success -- Performing Test _flag_found -- Performing Test _flag_found - Success -- [E57] Revison ID: E57Format-2.2.1-x86_64-linux-gcc13 -- [E57] Building shared library -- Performing Test COMPILER_HAS_HIDDEN_VISIBILITY -- Performing Test COMPILER_HAS_HIDDEN_VISIBILITY - Success -- Performing Test COMPILER_HAS_HIDDEN_INLINE_VISIBILITY -- Performing Test COMPILER_HAS_HIDDEN_INLINE_VISIBILITY - Success -- Performing Test COMPILER_HAS_DEPRECATED_ATTR -- Performing Test COMPILER_HAS_DEPRECATED_ATTR - Success -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/TypePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/BaseClassPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/BoundBoxPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/CoordinateSystemPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/PersistencePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/VectorPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/MatrixPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/RotationPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/PlacementPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/AxisPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/UnitPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/QuantityPy.cpp -- Found zipios++: -- Found zipios++ headers. -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App/DocumentPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App/DocumentObjectPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App/ExtensionPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App/ExtensionContainerPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App/DocumentObjectExtensionPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App/GroupExtensionPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App/LinkBaseExtensionPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App/DocumentObjectGroupPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App/GeoFeaturePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App/GeoFeatureGroupExtensionPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App/MetadataPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App/OriginGroupExtensionPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App/PartPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App/ComplexGeoDataPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App/PropertyContainerPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App/MaterialPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem/App/FemMeshPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem/App/FemPostPipelinePy.cpp -- Found OpenMP_C: -fopenmp (found version "4.5") -- Found OpenMP_CXX: -fopenmp (found version "4.5") -- Found OpenMP: TRUE (found version "4.5") -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem/Gui/ViewProviderFemMeshPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem/Gui/ViewProviderFemPostPipelinePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import/App/StepShapePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Mesh/App/EdgePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Mesh/App/FacetPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Mesh/App/MeshFeaturePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Mesh/App/MeshPointPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Mesh/App/MeshPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Mesh/Gui/ViewProviderMeshPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/ArcPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/ArcOfConicPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/ArcOfCirclePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/ArcOfParabolaPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/BodyBasePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/ConicPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/CirclePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/ArcOfEllipsePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/EllipsePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/HyperbolaPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/ArcOfHyperbolaPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/ParabolaPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/OffsetCurvePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/GeometryPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/GeometryExtensionPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/GeometryIntExtensionPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/GeometryStringExtensionPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/GeometryBoolExtensionPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/GeometryDoubleExtensionPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/GeometryCurvePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/BoundedCurvePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/TrimmedCurvePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/GeometrySurfacePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/LinePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/LineSegmentPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/PointPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/BezierCurvePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/BSplineCurvePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/PlanePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/ConePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/CylinderPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/SpherePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/ToroidPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/BezierSurfacePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/BSplineSurfacePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/OffsetSurfacePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/PlateSurfacePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/RectangularTrimmedSurfacePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/SurfaceOfExtrusionPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/SurfaceOfRevolutionPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/PartFeaturePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/AttachExtensionPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/Part2DObjectPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/AttachEnginePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/TopoShapePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/TopoShapeCompoundPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/TopoShapeCompSolidPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/TopoShapeEdgePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/TopoShapeFacePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/TopoShapeShellPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/TopoShapeSolidPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/TopoShapeVertexPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/TopoShapeWirePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/BRepOffsetAPI_MakePipeShellPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/BRepOffsetAPI_MakeFillingPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/PrecisionPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/BRepFeat/MakePrismPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/ChFi2d/ChFi2d_AnaFilletAlgoPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/ChFi2d/ChFi2d_FilletAlgoPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/ChFi2d/ChFi2d_ChamferAPIPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/ChFi2d/ChFi2d_FilletAPIPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/Geom2d/ArcOfCircle2dPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/Geom2d/ArcOfConic2dPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/Geom2d/ArcOfEllipse2dPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/Geom2d/ArcOfHyperbola2dPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/Geom2d/ArcOfParabola2dPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/Geom2d/BezierCurve2dPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/Geom2d/BSplineCurve2dPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/Geom2d/Circle2dPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/Geom2d/Conic2dPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/Geom2d/Ellipse2dPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/Geom2d/Geometry2dPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/Geom2d/Hyperbola2dPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/Geom2d/Curve2dPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/Geom2d/Line2dSegmentPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/Geom2d/Line2dPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/Geom2d/OffsetCurve2dPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/Geom2d/Parabola2dPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/GeomPlate/BuildPlateSurfacePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/GeomPlate/CurveConstraintPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/GeomPlate/PointConstraintPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/HLRBRep/HLRBRep_AlgoPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/HLRBRep/HLRToShapePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/HLRBRep/HLRBRep_PolyAlgoPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/HLRBRep/PolyHLRToShapePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/App/ShapeUpgrade/UnifySameDomainPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign/App/BodyPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign/App/FeaturePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign/Gui/ViewProviderPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/App/CommandPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/App/PathPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/App/ToolPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/App/TooltablePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/App/FeaturePathCompoundPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/App/AreaPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/App/FeatureAreaPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/App/VoronoiPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/App/VoronoiCellPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/App/VoronoiEdgePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/App/VoronoiVertexPy.cpp -- setting gcc options: -Wall -Werror -Wno-deprecated -pedantic-errors -- Found Boost: /usr/lib64/cmake/Boost-1.81.0/BoostConfig.cmake (found version "1.81.0") found components: python311 -- found Boost: 1_81 -- boost-incude dirs are: /usr/include -- boost-python lib is: -- boost_LIBRARY_DIRS is: /usr/lib64 -- Boost_LIBRARIES is: Boost::python -- area module (for Path Workbench) will be installed to: lib64 -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/PathSimulator/App/PathSimPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Points/App/PointsPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Robot/App/Robot6AxisPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Robot/App/TrajectoryPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Robot/App/WaypointPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Robot/App/RobotObjectPy.cpp -- Performing Test _flag_found -- Performing Test _flag_found - Success -- Performing Test _flag_found -- Performing Test _flag_found - Success -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Sketcher/App/SketchObjectSFPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Sketcher/App/SketchObjectPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Sketcher/App/SketchGeometryExtensionPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Sketcher/App/ExternalGeometryExtensionPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Sketcher/App/GeometryFacadePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Sketcher/App/ExternalGeometryFacadePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Sketcher/App/ConstraintPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Sketcher/App/SketchPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Spreadsheet/App/SheetPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Spreadsheet/App/PropertySheetPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Spreadsheet/App/PropertyColumnWidthsPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Spreadsheet/App/PropertyRowHeightsPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Spreadsheet/Gui/ViewProviderSpreadsheetPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Measure/App/MeasurementPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw/App/DrawPagePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw/App/DrawViewPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw/App/DrawViewPartPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw/App/DrawViewSymbolPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw/App/DrawTemplatePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw/App/DrawParametricTemplatePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw/App/DrawSVGTemplatePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw/App/DrawViewClipPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw/App/DrawViewDimensionPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw/App/DrawViewDimExtentPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw/App/DrawHatchPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw/App/DrawGeomHatchPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw/App/DrawViewCollectionPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw/App/DrawProjGroupPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw/App/DrawProjGroupItemPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw/App/DrawViewAnnotationPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw/App/DrawLeaderLinePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw/App/DrawRichAnnoPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw/App/GeomFormatPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw/App/CenterLinePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw/App/CosmeticEdgePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw/App/CosmeticVertexPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw/App/DrawTilePy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw/App/DrawTileWeldPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw/App/DrawWeldSymbolPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw/App/CosmeticExtensionPy.cpp -- Coin3D doc is not installed -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/DocumentPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/PythonWorkbenchPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/ViewProviderPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/ViewProviderDocumentObjectPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/ViewProviderExtensionPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/WorkbenchPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/SelectionObjectPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/LinkViewPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/ViewProviderLinkPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/AxisOriginPy.cpp -- /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/CommandPy.cpp -- ============== Summary report ============== -- Build type: -- Compiler: /usr/bin/g++ (13.0.1) -- Flags: -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -- Standard: Requires C++17 -- Python: 3.11.2 [/usr/bin/python3] [.cpython-311-x86_64-linux-gnu] -- PCL: not enabled -- pybind11: not enabled -- Boost: 1.81.0 (1.81.0) -- XercesC: 3.2.3 [/usr/lib64/libxerces-c.so] [/usr/include] -- ZLIB: 1.2.13 -- PyCXX: 7.1.7 [/usr/include] -- OCC: 7.6.3 [TKFillet;TKMesh;TKernel;TKG2d;TKG3d;TKMath;TKIGES;TKSTL;TKShHealing;TKXSBase;TKBool;TKBO;TKBRep;TKTopAlgo;TKGeomAlgo;TKGeomBase;TKOffset;TKPrim;TKSTEPBase;TKSTEPAttr;TKSTEP209;TKSTEP;TKHLR;TKFeat] [/usr/lib64] [/usr/include/opencascade] -- SMESH: build internal -- MEDFile: 4.1.0 [/usr/lib64/libmedC.so;/usr/lib64/libmed.so] [/usr/include/med] -- HDF5: 1.12.1 -- VTK: 9.2.6 -- NETGEN: not enabled -- SWIG: 4.1.1 -- Eigen3 3.4.0 -- Qt5Core: 5.15.8 -- Qt5Network: 5.15.8 -- Qt5Xml: 5.15.8 -- Qt5XmlPatterns: 5.15.8 -- Qt5Widgets: 5.15.8 -- Qt5PrintSupport: 5.15.8 -- Qt5OpenGL: 5.15.8 -- Qt5Svg: 5.15.8 -- Qt5UiTools: 5.15.8 -- Qt5Concurrent: 5.15.8 -- Qt5WebEngineWidgets: 5.15.12 -- Designer plugin: not built per user request (BUILD_DESIGNER_PLUGIN) -- Shiboken2: 5.15.7 [/usr/lib64/cmake/Shiboken2-5.15.7] [/usr/include/shiboken2] -- PySide2: 5.15.7 [/usr/include/PySide2] -- PySide2Tools: [/usr/lib64/qt5/bin/uic] [/usr/lib64/qt5/bin/rcc] -- Freetype: 2.13.0 -- OpenGL: -- OpenGLU: [/usr/lib64/libGLU.so][/usr/include] -- Coin3D: 4.0.0 [Coin] [/usr/include/Coin4] -- Pivy: 0.6.8 -- SPNAV: [/usr/lib64/libspnav.so] [/usr/include] -- Matplotlib: 3.7.1 -- Rift: not enabled (BUILD_VR) -- Doxygen: 1.9.6 -- Language: English -- Coin3D_DOC: not found ================================================= Now run 'cmake --build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' to build FreeCAD ================================================= -- Configuring done (17.9s) -- Generating done (0.7s) -- Build files have been written to: /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build + /usr/bin/cmake --build redhat-linux-build -j2 --verbose /usr/bin/cmake -S/builddir/build/BUILD/FreeCAD-0.20.2 -B/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build --check-build-system CMakeFiles/Makefile.cmake 0 /usr/bin/cmake -E cmake_progress_start /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/CMakeFiles /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build//CMakeFiles/progress.marks /usr/bin/gmake -f CMakeFiles/Makefile2 all gmake[1]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/build.make src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/depend /usr/bin/gmake -f src/3rdParty/salomesmesh/CMakeFiles/Driver.dir/build.make src/3rdParty/salomesmesh/CMakeFiles/Driver.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/DependInfo.cmake --color= gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh/CMakeFiles/Driver.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/build.make src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/3rdParty/salomesmesh/CMakeFiles/Driver.dir/build.make src/3rdParty/salomesmesh/CMakeFiles/Driver.dir/build [ 0%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_BallElement.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_BallElement.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_BallElement.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_BallElement.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_BallElement.cpp gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 0%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/Driver.dir/src/Driver/Driver_Document.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDriver_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/Driver.dir/src/Driver/Driver_Document.cpp.o -MF CMakeFiles/Driver.dir/src/Driver/Driver_Document.cpp.o.d -o CMakeFiles/Driver.dir/src/Driver/Driver_Document.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver/Driver_Document.cpp In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshCell.hxx:23, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_BallElement.hxx:28, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_BallElement.cpp:25: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_ElemIterator.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:34: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 0%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/Driver.dir/src/Driver/Driver_Mesh.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDriver_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/Driver.dir/src/Driver/Driver_Mesh.cpp.o -MF CMakeFiles/Driver.dir/src/Driver/Driver_Mesh.cpp.o.d -o CMakeFiles/Driver.dir/src/Driver/Driver_Mesh.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver/Driver_Mesh.cpp [ 0%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_Downward.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_Downward.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_Downward.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_Downward.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_Downward.cpp [ 0%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/Driver.dir/src/Driver/Driver_SMDS_Mesh.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDriver_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/Driver.dir/src/Driver/Driver_SMDS_Mesh.cpp.o -MF CMakeFiles/Driver.dir/src/Driver/Driver_SMDS_Mesh.cpp.o.d -o CMakeFiles/Driver.dir/src/Driver/Driver_SMDS_Mesh.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver/Driver_SMDS_Mesh.cpp [ 0%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/Driver.dir/src/Driver/Driver_SMESHDS_Mesh.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDriver_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/Driver.dir/src/Driver/Driver_SMESHDS_Mesh.cpp.o -MF CMakeFiles/Driver.dir/src/Driver/Driver_SMESHDS_Mesh.cpp.o.d -o CMakeFiles/Driver.dir/src/Driver/Driver_SMESHDS_Mesh.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver/Driver_SMESHDS_Mesh.cpp [ 0%] Linking CXX shared library ../../../lib/libDriver.so cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/cmake -E cmake_link_script CMakeFiles/Driver.dir/link.txt --verbose=1 /usr/bin/g++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes -shared -Wl,-soname,libDriver.so -o ../../../lib/libDriver.so CMakeFiles/Driver.dir/src/Driver/Driver_Document.cpp.o CMakeFiles/Driver.dir/src/Driver/Driver_Mesh.cpp.o CMakeFiles/Driver.dir/src/Driver/Driver_SMDS_Mesh.cpp.o CMakeFiles/Driver.dir/src/Driver/Driver_SMESHDS_Mesh.cpp.o /usr/lib64/libTKSTL.so.7.6.3 /usr/lib64/libTKOffset.so.7.6.3 /usr/lib64/libTKFeat.so.7.6.3 /usr/lib64/libTKBin.so.7.6.3 /usr/lib64/libTKBinL.so.7.6.3 /usr/lib64/libTKXDESTEP.so.7.6.3 /usr/lib64/libTKXDEIGES.so.7.6.3 /usr/lib64/libTKMeshVS.so.7.6.3 /usr/lib64/libTKRWMesh.so.7.6.3 /usr/lib64/libTKFillet.so.7.6.3 /usr/lib64/libTKSTEP.so.7.6.3 /usr/lib64/libTKSTEPAttr.so.7.6.3 /usr/lib64/libTKSTEP209.so.7.6.3 /usr/lib64/libTKSTEPBase.so.7.6.3 /usr/lib64/libTKIGES.so.7.6.3 /usr/lib64/libTKBool.so.7.6.3 /usr/lib64/libTKXSBase.so.7.6.3 /usr/lib64/libTKXCAF.so.7.6.3 /usr/lib64/libTKVCAF.so.7.6.3 /usr/lib64/libTKCAF.so.7.6.3 /usr/lib64/libTKBO.so.7.6.3 /usr/lib64/libTKPrim.so.7.6.3 /usr/lib64/libTKLCAF.so.7.6.3 /usr/lib64/libTKCDF.so.7.6.3 /usr/lib64/libTKV3d.so.7.6.3 /usr/lib64/libTKMesh.so.7.6.3 /usr/lib64/libTKShHealing.so.7.6.3 /usr/lib64/libTKHLR.so.7.6.3 /usr/lib64/libTKTopAlgo.so.7.6.3 /usr/lib64/libTKGeomAlgo.so.7.6.3 /usr/lib64/libTKBRep.so.7.6.3 /usr/lib64/libTKGeomBase.so.7.6.3 /usr/lib64/libTKG3d.so.7.6.3 /usr/lib64/libTKG2d.so.7.6.3 /usr/lib64/libTKService.so.7.6.3 /usr/lib64/libTKMath.so.7.6.3 /usr/lib64/libTKernel.so.7.6.3 -lpthread -lrt -lstdc++ -ldl -lfontconfig -lGL /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so -lX11 /usr/lib64/libfreetype.so In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshNode.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_Mesh.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_Downward.cpp:25: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_iterator_base_funcs.h:66, from /usr/include/c++/13/string:47, from /usr/include/c++/13/bits/locale_classes.h:40, from /usr/include/c++/13/bits/ios_base.h:41, from /usr/include/c++/13/ios:44, from /usr/include/c++/13/istream:40, from /usr/include/c++/13/fstream:40, from /usr/include/vtk/vtkIOStream.h:29, from /usr/include/vtk/vtkSystemIncludes.h:39, from /usr/include/vtk/vtkIndent.h:28, from /usr/include/vtk/vtkObjectBase.h:53, from /usr/include/vtk/vtkObject.h:45, from /usr/include/vtk/vtkAbstractCellLinks.h:35, from /usr/include/vtk/vtkUnstructuredGrid.h:31, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_UnstructuredGrid.hxx:29, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_Downward.hxx:27, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_Downward.cpp:24: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 0%] Built target Driver /usr/bin/gmake -f src/3rdParty/salomesmesh/CMakeFiles/MEFISTO2.dir/build.make src/3rdParty/salomesmesh/CMakeFiles/MEFISTO2.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh/CMakeFiles/MEFISTO2.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/3rdParty/salomesmesh/CMakeFiles/MEFISTO2.dir/build.make src/3rdParty/salomesmesh/CMakeFiles/MEFISTO2.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 0%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/MEFISTO2.dir/src/MEFISTO2/aptrte.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DMEFISTO2_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -DMEFISTO2D_EXPORTS -MD -MT src/3rdParty/salomesmesh/CMakeFiles/MEFISTO2.dir/src/MEFISTO2/aptrte.cpp.o -MF CMakeFiles/MEFISTO2.dir/src/MEFISTO2/aptrte.cpp.o.d -o CMakeFiles/MEFISTO2.dir/src/MEFISTO2/aptrte.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/aptrte.cpp In file included from /usr/include/opencascade/NCollection_IndexedDataMap.hxx:23, from /usr/include/opencascade/Standard_Dump.hxx:17, from /usr/include/opencascade/NCollection_Vec2.hxx:20, from /usr/include/opencascade/NCollection_Vec3.hxx:20, from /usr/include/opencascade/NCollection_Vec4.hxx:18, from /usr/include/opencascade/NCollection_Mat4.hxx:19, from /usr/include/opencascade/gp_Trsf.hxx:21, from /usr/include/opencascade/gp_Pnt.hxx:220, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/Rn.h:29, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/aptrte.cpp:27: /usr/include/opencascade/NCollection_StlIterator.hxx:30:15: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 30 | public std::iterator struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_ElemIterator.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:34: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 1%] Linking CXX shared library ../../../lib/libMEFISTO2.so cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/cmake -E cmake_link_script CMakeFiles/MEFISTO2.dir/link.txt --verbose=1 /usr/bin/g++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes -shared -Wl,-soname,libMEFISTO2.so -o ../../../lib/libMEFISTO2.so CMakeFiles/MEFISTO2.dir/src/MEFISTO2/aptrte.cpp.o CMakeFiles/MEFISTO2.dir/src/MEFISTO2/trte.c.o /usr/lib64/libTKSTL.so.7.6.3 /usr/lib64/libTKOffset.so.7.6.3 /usr/lib64/libTKFeat.so.7.6.3 /usr/lib64/libTKBin.so.7.6.3 /usr/lib64/libTKBinL.so.7.6.3 /usr/lib64/libTKXDESTEP.so.7.6.3 /usr/lib64/libTKXDEIGES.so.7.6.3 /usr/lib64/libTKMeshVS.so.7.6.3 /usr/lib64/libTKRWMesh.so.7.6.3 /usr/lib64/libTKFillet.so.7.6.3 /usr/lib64/libTKSTEP.so.7.6.3 /usr/lib64/libTKSTEPAttr.so.7.6.3 /usr/lib64/libTKSTEP209.so.7.6.3 /usr/lib64/libTKSTEPBase.so.7.6.3 /usr/lib64/libTKIGES.so.7.6.3 /usr/lib64/libTKBool.so.7.6.3 /usr/lib64/libTKXSBase.so.7.6.3 /usr/lib64/libTKXCAF.so.7.6.3 /usr/lib64/libTKVCAF.so.7.6.3 /usr/lib64/libTKCAF.so.7.6.3 /usr/lib64/libTKBO.so.7.6.3 /usr/lib64/libTKPrim.so.7.6.3 /usr/lib64/libTKLCAF.so.7.6.3 /usr/lib64/libTKCDF.so.7.6.3 /usr/lib64/libTKV3d.so.7.6.3 /usr/lib64/libTKMesh.so.7.6.3 /usr/lib64/libTKShHealing.so.7.6.3 /usr/lib64/libTKHLR.so.7.6.3 /usr/lib64/libTKTopAlgo.so.7.6.3 /usr/lib64/libTKGeomAlgo.so.7.6.3 /usr/lib64/libTKBRep.so.7.6.3 /usr/lib64/libTKGeomBase.so.7.6.3 /usr/lib64/libTKG3d.so.7.6.3 /usr/lib64/libTKG2d.so.7.6.3 /usr/lib64/libTKService.so.7.6.3 /usr/lib64/libTKMath.so.7.6.3 /usr/lib64/libTKernel.so.7.6.3 -lpthread -lrt -lstdc++ -ldl -lfontconfig -lGL /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so -lX11 /usr/lib64/libfreetype.so /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/aptrte.h:304:3: warning: type of 'teajte_' does not match original declaration [-Wlto-type-mismatch] 304 | teajte( Z & mxsomm, Z & nbsomm, R3 * mnpxyd, R3 * comxmi, | ^ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:1719:22: note: return value type mismatch 1719 | /* Subroutine */ int teajte_(integer *mxsomm, integer *nbsomm, doublereal * | ^ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:1719:22: note: type 'int' should match type 'void' /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:1719:22: note: 'teajte_' was previously declared here /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:1719:22: note: code may be misoptimized unless '-fno-strict-aliasing' is used /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/aptrte.h:316:3: warning: type of 'tehote_' does not match original declaration [-Wlto-type-mismatch] 316 | tehote( Z & nutysu, Z & nbarpi, Z & mxsomm, Z & nbsomm, R3 * mnpxyd, | ^ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:1989:22: note: return value type mismatch 1989 | /* Subroutine */ int tehote_(integer *nutysu, integer *nbarpi, integer * | ^ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:1989:22: note: type 'int' should match type 'void' /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:1989:22: note: 'tehote_' was previously declared here /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:1989:22: note: code may be misoptimized unless '-fno-strict-aliasing' is used /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/aptrte.h:331:3: warning: type of 'tetrte_' does not match original declaration [-Wlto-type-mismatch] 331 | tetrte( R3 * comxmi, R & aretmx, Z & nbarpi, Z & mxsomm, R3 * mnpxyd, | ^ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:2460:22: note: return value type mismatch 2460 | /* Subroutine */ int tetrte_(doublereal *comxmi, doublereal *aretmx, integer * | ^ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:2460:22: note: type 'int' should match type 'void' /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:2460:22: note: 'tetrte_' was previously declared here /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:2460:22: note: code may be misoptimized unless '-fno-strict-aliasing' is used /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/aptrte.h:358:3: warning: type of 'tedela_' does not match original declaration [-Wlto-type-mismatch] 358 | tedela( R3 * mnpxyd, Z * mnarst, | ^ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:2864:22: note: return value type mismatch 2864 | /* Subroutine */ int tedela_(doublereal *pxyd, integer *noarst, integer * | ^ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:2864:22: note: type 'int' should match type 'void' /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:2864:22: note: 'tedela_' was previously declared here /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:2864:22: note: code may be misoptimized unless '-fno-strict-aliasing' is used /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/aptrte.h:372:3: warning: type of 'terefr_' does not match original declaration [-Wlto-type-mismatch] 372 | terefr( Z & nbarpi, R3 * mnpxyd, | ^ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:3076:22: note: return value type mismatch 3076 | /* Subroutine */ int terefr_(integer *nbarpi, doublereal *pxyd, integer * | ^ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:3076:22: note: type 'int' should match type 'void' /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:3076:22: note: 'terefr_' was previously declared here /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:3076:22: note: code may be misoptimized unless '-fno-strict-aliasing' is used /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/aptrte.h:389:3: warning: type of 'tesuex_' does not match original declaration [-Wlto-type-mismatch] 389 | tesuex( Z & nblf, Z * nulftr, | ^ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:3211:22: note: return value type mismatch 3211 | /* Subroutine */ int tesuex_(integer *nblftr, integer *nulftr, integer * | ^ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:3211:22: note: type 'int' should match type 'void' /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:3211:22: note: 'tesuex_' was previously declared here /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:3211:22: note: code may be misoptimized unless '-fno-strict-aliasing' is used /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/aptrte.h:404:3: warning: type of 'teamqt_' does not match original declaration [-Wlto-type-mismatch] 404 | teamqt( Z & nutysu, R & aretmx, R & airemx, | ^ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:4903:22: note: return value type mismatch 4903 | /* Subroutine */ int teamqt_(integer *nutysu, doublereal *aretmx, doublereal * | ^ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:4903:22: note: type 'int' should match type 'void' /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:4903:22: note: 'teamqt_' was previously declared here /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:4903:22: note: code may be misoptimized unless '-fno-strict-aliasing' is used /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/aptrte.h:437:3: warning: type of 'qutr2d_' does not match original declaration [-Wlto-type-mismatch] 437 | qutr2d( R3 & p1, R3 & p2, R3 & p3, R & qualite ); | ^ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:335:22: note: return value type mismatch 335 | /* Subroutine */ int qutr2d_(doublereal *p1, doublereal *p2, doublereal *p3, | ^ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:335:22: note: type 'int' should match type 'void' /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:335:22: note: 'qutr2d_' was previously declared here /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:335:22: note: code may be misoptimized unless '-fno-strict-aliasing' is used /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/aptrte.h:448:3: warning: type of 'surtd2_' does not match original declaration [-Wlto-type-mismatch] 448 | surtd2( R3 & p1, R3 & p2, R3 & p3 ); | ^ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:413:12: note: 'surtd2_' was previously declared here 413 | doublereal surtd2_(doublereal *p1, doublereal *p2, doublereal *p3) | ^ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:413:12: note: code may be misoptimized unless '-fno-strict-aliasing' is used /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:4915:33: warning: type of 'qualitetrte_' does not match original declaration [-Wlto-type-mismatch] 4915 | extern /* Subroutine */ int qualitetrte_(doublereal *, integer *, integer | ^ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/aptrte.cpp:764:2: note: return value type mismatch 764 | qualitetrte( R3 *mnpxyd, | ^ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/aptrte.cpp:764:2: note: type 'void' should match type 'int' /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/aptrte.cpp:764:2: note: 'qualitetrte_' was previously declared here /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/aptrte.cpp:764:2: note: code may be misoptimized unless '-fno-strict-aliasing' is used /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c:1925:33: warning: type of 'areteideale_' does not match original declaration [-Wlto-type-mismatch] 1925 | extern /* Subroutine */ int areteideale_(doublereal *); | ^ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/aptrte.cpp:44:7: note: return value type mismatch 44 | areteideale(R &_areteideale) | ^ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/aptrte.cpp:44:7: note: type 'R' should match type 'int' /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/aptrte.cpp:44:7: note: 'areteideale_' was previously declared here /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/MEFISTO2/aptrte.cpp:44:7: note: code may be misoptimized unless '-fno-strict-aliasing' is used [ 1%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_FaceOfNodes.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_FaceOfNodes.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_FaceOfNodes.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_FaceOfNodes.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_FaceOfNodes.cpp In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshCell.hxx:23, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshFace.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_FaceOfNodes.hxx:30, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_FaceOfNodes.cpp:30: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_algobase.h:65, from /usr/include/c++/13/bits/stl_tree.h:63, from /usr/include/c++/13/map:62, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_SetIterator.hxx:123, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_FaceOfNodes.cpp:29: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 1%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_FacePosition.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_FacePosition.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_FacePosition.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_FacePosition.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_FacePosition.cpp [ 1%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_IteratorOfElements.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_IteratorOfElements.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_IteratorOfElements.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_IteratorOfElements.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_IteratorOfElements.cpp gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 1%] Built target MEFISTO2 /usr/bin/gmake -f src/3rdParty/lazy_loader/CMakeFiles/lazy_loader.dir/build.make src/3rdParty/lazy_loader/CMakeFiles/lazy_loader.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/lazy_loader /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/lazy_loader /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/lazy_loader/CMakeFiles/lazy_loader.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/3rdParty/lazy_loader/CMakeFiles/lazy_loader.dir/build.make src/3rdParty/lazy_loader/CMakeFiles/lazy_loader.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/lazy_loader/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Ext/lazy_loader/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/lazy_loader && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/lazy_loader/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Ext/lazy_loader/__init__.py [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/lazy_loader/lazy_loader.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Ext/lazy_loader/lazy_loader.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/lazy_loader && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/lazy_loader/lazy_loader.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Ext/lazy_loader/lazy_loader.py gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 2%] Built target lazy_loader /usr/bin/gmake -f src/3rdParty/libE57Format/CMakeFiles/E57Format_autogen.dir/build.make src/3rdParty/libE57Format/CMakeFiles/E57Format_autogen.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/CMakeFiles/E57Format_autogen.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/3rdParty/libE57Format/CMakeFiles/E57Format_autogen.dir/build.make src/3rdParty/libE57Format/CMakeFiles/E57Format_autogen.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 2%] Automatic MOC for target E57Format cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/cmake -E cmake_autogen /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/CMakeFiles/E57Format_autogen.dir/AutogenInfo.json "" AutoGen: Refreshing parse cache because it doesn't exist. AutoMoc: Generating "SRC:/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/moc_predefs.h", because it doesn't exist. /usr/bin/g++ -dM -E -c /usr/share/cmake/Modules/CMakeCXXCompilerABI.cpp -DCRCPP_BRANCHLESS -DCRCPP_USE_CPP11 -DE57Format_EXPORTS -DE57_DEBUG -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 "-DREVISION_ID=\"E57Format-2.2.1-x86_64-linux-gcc13\"" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/extern/CRCpp/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/include -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src -I/usr/include -I/usr/include/c++/13 -I/usr/include/c++/13/x86_64-redhat-linux -I/usr/include/c++/13/backward -I/usr/lib/gcc/x86_64-redhat-linux/13/include -I/usr/local/include AutoGen: Parsing "SRC:/redhat-linux-build/src/3rdParty/libE57Format/E57Export.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/extern/CRCpp/inc/CRC.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/include/E57Exception.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/include/E57Format.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/include/E57SimpleData.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/include/E57SimpleReader.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/include/E57SimpleWriter.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/BlobNodeImpl.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/CheckedFile.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/Common.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/CompressedVectorNodeImpl.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/CompressedVectorReaderImpl.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/CompressedVectorWriterImpl.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/DecodeChannel.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/Decoder.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/E57Version.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/E57XmlParser.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/Encoder.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/FloatNodeImpl.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/ImageFileImpl.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/IntegerNodeImpl.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/NodeImpl.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/Packet.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/ReaderImpl.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/ScaledIntegerNodeImpl.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/SectionHeaders.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/SourceDestBufferImpl.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/StringNodeImpl.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/StructureNodeImpl.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/VectorNodeImpl.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/WriterImpl.h" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/BlobNodeImpl.cpp" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/CheckedFile.cpp" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/Common.cpp" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/CompressedVectorNodeImpl.cpp" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/CompressedVectorReaderImpl.cpp" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/CompressedVectorWriterImpl.cpp" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/DecodeChannel.cpp" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/Decoder.cpp" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/E57Exception.cpp" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/E57Format.cpp" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/E57SimpleData.cpp" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/E57SimpleReader.cpp" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/E57SimpleWriter.cpp" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/E57XmlParser.cpp" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/Encoder.cpp" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/FloatNodeImpl.cpp" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/ImageFileImpl.cpp" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/IntegerNodeImpl.cpp" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/NodeImpl.cpp" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/Packet.cpp" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/ReaderImpl.cpp" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/ScaledIntegerNodeImpl.cpp" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/SectionHeaders.cpp" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/SourceDestBufferImpl.cpp" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/StringNodeImpl.cpp" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/StructureNodeImpl.cpp" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/VectorNodeImpl.cpp" AutoGen: Parsing "SRC:/src/3rdParty/libE57Format/src/WriterImpl.cpp" AutoMoc: Generating MOC compilation "SRC:/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/mocs_compilation.cpp" AutoGen: Writing the parse cache file "SRC:/redhat-linux-build/src/3rdParty/libE57Format/CMakeFiles/E57Format_autogen.dir/ParseCache.txt" AutoGen: Writing the settings file "SRC:/redhat-linux-build/src/3rdParty/libE57Format/CMakeFiles/E57Format_autogen.dir/AutogenUsed.txt" gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 2%] Built target E57Format_autogen /usr/bin/gmake -f src/Base/CMakeFiles/FreeCADBase_autogen.dir/build.make src/Base/CMakeFiles/FreeCADBase_autogen.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Base /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/CMakeFiles/FreeCADBase_autogen.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Base/CMakeFiles/FreeCADBase_autogen.dir/build.make src/Base/CMakeFiles/FreeCADBase_autogen.dir/build In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_IteratorOfElements.hxx:28, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_IteratorOfElements.cpp:29: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_ElemIterator.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:34: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 2%] Automatic MOC for target FreeCADBase cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/cmake -E cmake_autogen /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/CMakeFiles/FreeCADBase_autogen.dir/AutogenInfo.json "" AutoGen: Refreshing parse cache because it doesn't exist. AutoMoc: Generating "SRC:/redhat-linux-build/src/Base/FreeCADBase_autogen/moc_predefs.h", because it doesn't exist. /usr/bin/g++ -dM -E -c /usr/share/cmake/Modules/CMakeCXXCompilerABI.cpp -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/lib64/qt5/mkspecs/linux-g++ -I/usr/include -I/usr/include/c++/13 -I/usr/include/c++/13/x86_64-redhat-linux -I/usr/include/c++/13/backward -I/usr/lib/gcc/x86_64-redhat-linux/13/include -I/usr/local/include AutoGen: Parsing "SRC:/src/Base/Axis.h" AutoGen: Parsing "SRC:/src/Base/Base64.h" AutoGen: Parsing "SRC:/src/Base/BaseClass.h" AutoGen: Parsing "SRC:/src/Base/BindingManager.h" AutoGen: Parsing "SRC:/src/Base/Bitmask.h" AutoGen: Parsing "SRC:/src/Base/BoundBox.h" AutoGen: Parsing "SRC:/src/Base/Builder3D.h" AutoGen: Parsing "SRC:/src/Base/Console.h" AutoGen: Parsing "SRC:/src/Base/ConsoleObserver.h" AutoGen: Parsing "SRC:/src/Base/Converter.h" AutoGen: Parsing "SRC:/src/Base/CoordinateSystem.h" AutoGen: Parsing "SRC:/src/Base/Debugger.h" AutoGen: Parsing "SRC:/src/Base/DualNumber.h" AutoGen: Parsing "SRC:/src/Base/DualQuaternion.h" AutoGen: Parsing "SRC:/src/Base/Exception.h" AutoGen: Parsing "SRC:/src/Base/ExceptionFactory.h" AutoGen: Parsing "SRC:/src/Base/Factory.h" AutoGen: Parsing "SRC:/src/Base/FileInfo.h" AutoGen: Parsing "SRC:/src/Base/FileTemplate.h" AutoGen: Parsing "SRC:/src/Base/FutureWatcherProgress.h" AutoGen: Parsing "SRC:/src/Base/GeometryPyCXX.h" AutoGen: Parsing "SRC:/src/Base/Handle.h" AutoGen: Parsing "SRC:/src/Base/InputSource.h" AutoGen: Parsing "SRC:/src/Base/Interpreter.h" AutoGen: Parsing "SRC:/src/Base/Matrix.h" AutoGen: Parsing "SRC:/src/Base/MemDebug.h" AutoGen: Parsing "SRC:/src/Base/Observer.h" AutoGen: Parsing "SRC:/src/Base/Parameter.h" AutoGen: Parsing "SRC:/src/Base/Persistence.h" AutoGen: Parsing "SRC:/src/Base/Placement.h" AutoGen: Parsing "SRC:/src/Base/PreCompiled.h" AutoGen: Parsing "SRC:/src/Base/PyExport.h" AutoGen: Parsing "SRC:/src/Base/PyObjectBase.h" AutoGen: Parsing "SRC:/src/Base/PyTools.h" AutoGen: Parsing "SRC:/src/Base/Quantity.h" AutoGen: Parsing "SRC:/src/Base/Reader.h" AutoGen: Parsing "SRC:/src/Base/Rotation.h" AutoGen: Parsing "SRC:/src/Base/Sequencer.h" AutoGen: Parsing "SRC:/src/Base/SmartPtrPy.h" AutoGen: Parsing "SRC:/src/Base/Stream.h" AutoGen: Parsing "SRC:/src/Base/Swap.h" AutoGen: Parsing "SRC:/src/Base/TimeInfo.h" AutoGen: Parsing "SRC:/src/Base/Tools.h" AutoGen: Parsing "SRC:/src/Base/Tools2D.h" AutoGen: Parsing "SRC:/src/Base/Translate.h" AutoGen: Parsing "SRC:/src/Base/Type.h" AutoGen: Parsing "SRC:/src/Base/Unit.h" AutoGen: Parsing "SRC:/src/Base/UnitsApi.h" AutoGen: Parsing "SRC:/src/Base/UnitsSchema.h" AutoGen: Parsing "SRC:/src/Base/UnitsSchemaCentimeters.h" AutoGen: Parsing "SRC:/src/Base/UnitsSchemaFemMilliMeterNewton.h" AutoGen: Parsing "SRC:/src/Base/UnitsSchemaImperial1.h" AutoGen: Parsing "SRC:/src/Base/UnitsSchemaInternal.h" AutoGen: Parsing "SRC:/src/Base/UnitsSchemaMKS.h" AutoGen: Parsing "SRC:/src/Base/UnitsSchemaMmMin.h" AutoGen: Parsing "SRC:/src/Base/Uuid.h" AutoGen: Parsing "SRC:/src/Base/Vector3D.h" AutoGen: Parsing "SRC:/src/Base/ViewProj.h" AutoGen: Parsing "SRC:/src/Base/Writer.h" AutoGen: Parsing "SRC:/src/Base/XMLTools.h" AutoGen: Parsing "SRC:/src/Base/fdstream.hpp" AutoGen: Parsing "SRC:/src/Base/gzstream.h" AutoGen: Parsing "SRC:/src/Base/Axis.cpp" AutoGen: Parsing "SRC:/src/Base/AxisPyImp.cpp" AutoGen: Parsing "SRC:/src/Base/Base64.cpp" AutoGen: Parsing "SRC:/src/Base/BaseClass.cpp" AutoGen: Parsing "SRC:/src/Base/BaseClassPyImp.cpp" AutoGen: Parsing "SRC:/src/Base/BindingManager.cpp" AutoGen: Parsing "SRC:/src/Base/BoundBoxPyImp.cpp" AutoGen: Parsing "SRC:/src/Base/Builder3D.cpp" AutoGen: Parsing "SRC:/src/Base/Console.cpp" AutoGen: Parsing "SRC:/src/Base/ConsoleObserver.cpp" AutoGen: Parsing "SRC:/src/Base/CoordinateSystem.cpp" AutoGen: Parsing "SRC:/src/Base/CoordinateSystemPyImp.cpp" AutoGen: Parsing "SRC:/src/Base/Debugger.cpp" AutoGen: Parsing "SRC:/src/Base/DualQuaternion.cpp" AutoGen: Parsing "SRC:/src/Base/Exception.cpp" AutoGen: Parsing "SRC:/src/Base/ExceptionFactory.cpp" AutoGen: Parsing "SRC:/src/Base/Factory.cpp" AutoGen: Parsing "SRC:/src/Base/FileInfo.cpp" AutoGen: Parsing "SRC:/src/Base/FileTemplate.cpp" AutoGen: Parsing "SRC:/src/Base/FutureWatcherProgress.cpp" AutoGen: Parsing "SRC:/src/Base/GeometryPyCXX.cpp" AutoGen: Parsing "SRC:/src/Base/Handle.cpp" AutoGen: Parsing "SRC:/src/Base/InputSource.cpp" AutoGen: Parsing "SRC:/src/Base/Interpreter.cpp" AutoGen: Parsing "SRC:/src/Base/Matrix.cpp" AutoGen: Parsing "SRC:/src/Base/MatrixPyImp.cpp" AutoGen: Parsing "SRC:/src/Base/MemDebug.cpp" AutoGen: Parsing "SRC:/src/Base/Parameter.cpp" AutoGen: Parsing "SRC:/src/Base/ParameterPy.cpp" AutoGen: Parsing "SRC:/src/Base/Persistence.cpp" AutoGen: Parsing "SRC:/src/Base/PersistencePyImp.cpp" AutoGen: Parsing "SRC:/src/Base/Placement.cpp" AutoGen: Parsing "SRC:/src/Base/PlacementPyImp.cpp" AutoGen: Parsing "SRC:/src/Base/PreCompiled.cpp" AutoGen: Parsing "SRC:/src/Base/PyExport.cpp" AutoGen: Parsing "SRC:/src/Base/PyObjectBase.cpp" AutoGen: Parsing "SRC:/src/Base/PyTools.c" AutoGen: Parsing "SRC:/src/Base/Quantity.cpp" AutoGen: Parsing "SRC:/src/Base/QuantityPyImp.cpp" AutoGen: Parsing "SRC:/src/Base/Reader.cpp" AutoGen: Parsing "SRC:/src/Base/Rotation.cpp" AutoGen: Parsing "SRC:/src/Base/RotationPyImp.cpp" AutoGen: Parsing "SRC:/src/Base/Sequencer.cpp" AutoGen: Parsing "SRC:/src/Base/SmartPtrPy.cpp" AutoGen: Parsing "SRC:/src/Base/Stream.cpp" AutoGen: Parsing "SRC:/src/Base/Swap.cpp" AutoGen: Parsing "SRC:/src/Base/TimeInfo.cpp" AutoGen: Parsing "SRC:/src/Base/Tools.cpp" AutoGen: Parsing "SRC:/src/Base/Tools2D.cpp" AutoGen: Parsing "SRC:/src/Base/Translate.cpp" AutoGen: Parsing "SRC:/src/Base/Type.cpp" AutoGen: Parsing "SRC:/src/Base/TypePyImp.cpp" AutoGen: Parsing "SRC:/src/Base/Unit.cpp" AutoGen: Parsing "SRC:/src/Base/UnitPyImp.cpp" AutoGen: Parsing "SRC:/src/Base/UnitsApi.cpp" AutoGen: Parsing "SRC:/src/Base/UnitsApiPy.cpp" AutoGen: Parsing "SRC:/src/Base/UnitsSchema.cpp" AutoGen: Parsing "SRC:/src/Base/UnitsSchemaCentimeters.cpp" AutoGen: Parsing "SRC:/src/Base/UnitsSchemaFemMilliMeterNewton.cpp" AutoGen: Parsing "SRC:/src/Base/UnitsSchemaImperial1.cpp" AutoGen: Parsing "SRC:/src/Base/UnitsSchemaInternal.cpp" AutoGen: Parsing "SRC:/src/Base/UnitsSchemaMKS.cpp" AutoGen: Parsing "SRC:/src/Base/UnitsSchemaMmMin.cpp" AutoGen: Parsing "SRC:/src/Base/Uuid.cpp" AutoGen: Parsing "SRC:/src/Base/Vector3D.cpp" AutoGen: Parsing "SRC:/src/Base/VectorPyImp.cpp" AutoGen: Parsing "SRC:/src/Base/ViewProj.cpp" AutoGen: Parsing "SRC:/src/Base/Writer.cpp" AutoGen: Parsing "SRC:/src/Base/XMLTools.cpp" AutoGen: Parsing "SRC:/src/Base/gzstream.cpp" AutoGen: Parsing "SRC:/src/Base/swigpyrun.cpp" AutoGen: Parsing "/usr/src/CXX/IndirectPythonInterface.cxx" AutoGen: Parsing "/usr/src/CXX/cxx_exceptions.cxx" AutoGen: Parsing "/usr/src/CXX/cxx_extensions.cxx" AutoGen: Parsing "/usr/src/CXX/cxxextensions.c" AutoGen: Parsing "/usr/src/CXX/cxxsupport.cxx" AutoMoc: Generating "SRC:/redhat-linux-build/src/Base/FreeCADBase_autogen/include/moc_Debugger.cpp", because it doesn't exist, from "SRC:/src/Base/Debugger.h" /usr/lib64/qt5/bin/moc -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/lib64/qt5/mkspecs/linux-g++ -I/usr/include -I/usr/include/c++/13 -I/usr/include/c++/13/x86_64-redhat-linux -I/usr/include/c++/13/backward -I/usr/lib/gcc/x86_64-redhat-linux/13/include -I/usr/local/include --include /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/moc_predefs.h --output-dep-file -o /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include/moc_Debugger.cpp /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/Debugger.h AutoMoc: Generating "SRC:/redhat-linux-build/src/Base/FreeCADBase_autogen/include/moc_FutureWatcherProgress.cpp", because it doesn't exist, from "SRC:/src/Base/FutureWatcherProgress.h" /usr/lib64/qt5/bin/moc -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/lib64/qt5/mkspecs/linux-g++ -I/usr/include -I/usr/include/c++/13 -I/usr/include/c++/13/x86_64-redhat-linux -I/usr/include/c++/13/backward -I/usr/lib/gcc/x86_64-redhat-linux/13/include -I/usr/local/include --include /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/moc_predefs.h --output-dep-file -o /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include/moc_FutureWatcherProgress.cpp /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/FutureWatcherProgress.h AutoMoc: Reading dependencies from "SRC:/redhat-linux-build/src/Base/FreeCADBase_autogen/include/moc_Debugger.cpp.d" AutoMoc: Reading dependencies from "SRC:/redhat-linux-build/src/Base/FreeCADBase_autogen/include/moc_FutureWatcherProgress.cpp.d" AutoMoc: Generating MOC compilation "SRC:/redhat-linux-build/src/Base/FreeCADBase_autogen/mocs_compilation.cpp" AutoGen: Writing the parse cache file "SRC:/redhat-linux-build/src/Base/CMakeFiles/FreeCADBase_autogen.dir/ParseCache.txt" AutoGen: Writing the settings file "SRC:/redhat-linux-build/src/Base/CMakeFiles/FreeCADBase_autogen.dir/AutogenUsed.txt" gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 2%] Built target FreeCADBase_autogen /usr/bin/gmake -f src/Build/CMakeFiles/fc_version.dir/build.make src/Build/CMakeFiles/fc_version.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Build/CMakeFiles/fc_version.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Build/CMakeFiles/fc_version.dir/build.make src/Build/CMakeFiles/fc_version.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 2%] Generating version_check cd /builddir/build/BUILD/FreeCAD-0.20.2/src/Build && /usr/bin/python3 /builddir/build/BUILD/FreeCAD-0.20.2/src/Tools/SubWCRev.py --srcdir=/builddir/build/BUILD/FreeCAD-0.20.2 --bindir=/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /bin/sh: line 1: git: command not found /bin/sh: line 1: bzr: command not found /bin/sh: line 1: svnversion: command not found /bin/sh: line 1: svn: command not found Unknown version control /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Build/Version.h.out written [ 2%] Generating Version.h cd /builddir/build/BUILD/FreeCAD-0.20.2/src/Build && /usr/bin/cmake -E copy_if_different /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Build/Version.h.out /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Build/Version.h gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 2%] Built target fc_version /usr/bin/gmake -f src/Mod/AddonManager/CMakeFiles/AddonManager.dir/build.make src/Mod/AddonManager/CMakeFiles/AddonManager.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager/CMakeFiles/AddonManager.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/AddonManager/CMakeFiles/AddonManager.dir/build.make src/Mod/AddonManager/CMakeFiles/AddonManager.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/ALLOWED_PYTHON_PACKAGES.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/ALLOWED_PYTHON_PACKAGES.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/ALLOWED_PYTHON_PACKAGES.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/ALLOWED_PYTHON_PACKAGES.txt [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/Addon.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/Addon.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/Addon.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/Addon.py [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManager.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManager.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManager.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManager.py [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManager.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManager.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManager.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManager.ui [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerOptions.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerOptions.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerOptions.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerOptions.ui [ 2%] Generating AddonManager_rc.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/lib64/qt5/bin/rcc --generator=python --compress-algo=zlib --compress=1 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/Resources/AddonManager.qrc -o /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager/AddonManager_rc.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && sed /^#\ /d /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager/AddonManager_rc.py >"/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager/AddonManager_rc.py.tmp" && mv /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager/AddonManager_rc.py.tmp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager/AddonManager_rc.py [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/Init.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/Init.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/Init.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/Init.py [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/InitGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/InitGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/InitGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/InitGui.py [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/NetworkManager.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/NetworkManager.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/NetworkManager.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/NetworkManager.py [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/TestAddonManagerApp.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/TestAddonManagerApp.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/TestAddonManagerApp.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/TestAddonManagerApp.py [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/TestAddonManagerGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/TestAddonManagerGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/TestAddonManagerGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/TestAddonManagerGui.py [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/add_toolbar_button_dialog.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/add_toolbar_button_dialog.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/add_toolbar_button_dialog.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/add_toolbar_button_dialog.ui [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/addonmanager_macro.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/addonmanager_macro.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/addonmanager_macro.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/addonmanager_macro.py [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/addonmanager_utilities.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/addonmanager_utilities.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/addonmanager_utilities.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/addonmanager_utilities.py [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/addonmanager_workers.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/addonmanager_workers.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/addonmanager_workers.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/addonmanager_workers.py [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/change_branch.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/change_branch.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/change_branch.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/change_branch.py [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/change_branch.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/change_branch.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/change_branch.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/change_branch.ui [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/compact_view.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/compact_view.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/compact_view.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/compact_view.py [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/dependency_resolution_dialog.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/dependency_resolution_dialog.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/dependency_resolution_dialog.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/dependency_resolution_dialog.ui [ 2%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_LinearEdge.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_LinearEdge.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_LinearEdge.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_LinearEdge.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_LinearEdge.cpp [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/expanded_view.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/expanded_view.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/expanded_view.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/expanded_view.py [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/first_run.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/first_run.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/first_run.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/first_run.ui [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/install_to_toolbar.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/install_to_toolbar.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/install_to_toolbar.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/install_to_toolbar.py [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/loading.html to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/loading.html cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/loading.html /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/loading.html [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/package_details.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/package_details.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/package_details.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/package_details.py [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/package_list.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/package_list.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/package_list.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/package_list.py [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/select_toolbar_dialog.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/select_toolbar_dialog.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/select_toolbar_dialog.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/select_toolbar_dialog.ui [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager/AddonManager_rc.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManager_rc.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager/AddonManager_rc.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManager_rc.py gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 2%] Built target AddonManager /usr/bin/gmake -f src/Mod/AddonManager/CMakeFiles/AddonManagerTests.dir/build.make src/Mod/AddonManager/CMakeFiles/AddonManagerTests.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager/CMakeFiles/AddonManagerTests.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/AddonManager/CMakeFiles/AddonManagerTests.dir/build.make src/Mod/AddonManager/CMakeFiles/AddonManagerTests.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/__init__.py [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/app/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/app/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/app/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/app/__init__.py [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/app/test_addon.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/app/test_addon.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/app/test_addon.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/app/test_addon.py [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/app/test_macro.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/app/test_macro.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/app/test_macro.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/app/test_macro.py [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/app/test_utilities.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/app/test_utilities.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/app/test_utilities.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/app/test_utilities.py [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/data/DoNothing.FCMacro to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/data/DoNothing.FCMacro cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/data/DoNothing.FCMacro /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/data/DoNothing.FCMacro [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/data/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/data/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/data/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/data/__init__.py [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/data/bad_macro_metadata.FCStd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/data/bad_macro_metadata.FCStd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/data/bad_macro_metadata.FCStd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/data/bad_macro_metadata.FCStd [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/data/combination.xml to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/data/combination.xml cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/data/combination.xml /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/data/combination.xml [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/data/depends_on_all_workbenches.xml to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/data/depends_on_all_workbenches.xml cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/data/depends_on_all_workbenches.xml /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/data/depends_on_all_workbenches.xml [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/data/good_macro_metadata.FCStd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/data/good_macro_metadata.FCStd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/data/good_macro_metadata.FCStd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/data/good_macro_metadata.FCStd [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/data/good_package.xml to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/data/good_package.xml cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/data/good_package.xml /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/data/good_package.xml [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/data/macro_only.xml to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/data/macro_only.xml cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/data/macro_only.xml /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/data/macro_only.xml [ 2%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/data/macro_template.FCStd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/data/macro_template.FCStd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/data/macro_template.FCStd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/data/macro_template.FCStd [ 3%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/data/missing_macro_metadata.FCStd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/data/missing_macro_metadata.FCStd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/data/missing_macro_metadata.FCStd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/data/missing_macro_metadata.FCStd [ 3%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/data/prefpack_only.xml to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/data/prefpack_only.xml cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/data/prefpack_only.xml /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/data/prefpack_only.xml [ 3%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/data/test_version_detection.xml to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/data/test_version_detection.xml cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/data/test_version_detection.xml /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/data/test_version_detection.xml [ 3%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/data/workbench_only.xml to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/data/workbench_only.xml cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/data/workbench_only.xml /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/data/workbench_only.xml [ 3%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/gui/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/gui/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/gui/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/gui/__init__.py [ 3%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/gui/test_gui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/gui/test_gui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/gui/test_gui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/gui/test_gui.py [ 3%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/test_information.md to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/test_information.md cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/AddonManager && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/AddonManager/AddonManagerTest/test_information.md /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/AddonManager/AddonManagerTest/test_information.md gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 3%] Built target AddonManagerTests /usr/bin/gmake -f src/Mod/Arch/CMakeFiles/Arch.dir/build.make src/Mod/Arch/CMakeFiles/Arch.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch/CMakeFiles/Arch.dir/DependInfo.cmake --color= In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshCell.hxx:23, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshEdge.hxx:29, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_LinearEdge.hxx:30, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_LinearEdge.cpp:30: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_ElemIterator.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:34: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Arch/CMakeFiles/Arch.dir/build.make src/Mod/Arch/CMakeFiles/Arch.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 3%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/Arch.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/Arch.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/Arch.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/Arch.py [ 3%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchAxis.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchAxis.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchAxis.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchAxis.py [ 3%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchAxisSystem.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchAxisSystem.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchAxisSystem.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchAxisSystem.py [ 3%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchBuilding.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchBuilding.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchBuilding.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchBuilding.py [ 3%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchBuildingPart.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchBuildingPart.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchBuildingPart.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchBuildingPart.py [ 3%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchCommands.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchCommands.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchCommands.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchCommands.py [ 3%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchComponent.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchComponent.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchComponent.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchComponent.py [ 3%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchCurtainWall.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchCurtainWall.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchCurtainWall.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchCurtainWall.py [ 3%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchCutPlane.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchCutPlane.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchCutPlane.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchCutPlane.py [ 3%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchEquipment.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchEquipment.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchEquipment.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchEquipment.py [ 3%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchFence.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchFence.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchFence.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchFence.py [ 3%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchFloor.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchFloor.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchFloor.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchFloor.py [ 3%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchFrame.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchFrame.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchFrame.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchFrame.py [ 3%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchGrid.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchGrid.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchGrid.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchGrid.py [ 3%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchIFC.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchIFC.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchIFC.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchIFC.py [ 3%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchIFCSchema.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchIFCSchema.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchIFCSchema.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchIFCSchema.py [ 3%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchIFCView.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchIFCView.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchIFCView.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchIFCView.py [ 3%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchMaterial.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchMaterial.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchMaterial.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchMaterial.py [ 3%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchNesting.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchNesting.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchNesting.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchNesting.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchPanel.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchPanel.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchPanel.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchPanel.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchPipe.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchPipe.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchPipe.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchPipe.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchPrecast.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchPrecast.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchPrecast.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchPrecast.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchProfile.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchProfile.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchProfile.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchProfile.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchProject.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchProject.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchProject.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchProject.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchRebar.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchRebar.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchRebar.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchRebar.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchReference.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchReference.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchReference.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchReference.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchRoof.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchRoof.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchRoof.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchRoof.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchSchedule.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchSchedule.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchSchedule.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchSchedule.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchSectionPlane.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchSectionPlane.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchSectionPlane.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchSectionPlane.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchSite.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchSite.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchSite.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchSite.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchSpace.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchSpace.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchSpace.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchSpace.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchStairs.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchStairs.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchStairs.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchStairs.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchStructure.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchStructure.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchStructure.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchStructure.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchTruss.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchTruss.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchTruss.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchTruss.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchVRM.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchVRM.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchVRM.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchVRM.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchWall.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchWall.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchWall.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchWall.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchWindow.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchWindow.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchWindow.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchWindow.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchWindowPresets.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchWindowPresets.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/ArchWindowPresets.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/ArchWindowPresets.py [ 4%] Generating Arch_rc.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/lib64/qt5/bin/rcc --generator=python --compress-algo=zlib --compress=1 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/Resources/Arch.qrc -o /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch/Arch_rc.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && sed /^#\ /d /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch/Arch_rc.py >"/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch/Arch_rc.py.tmp" && mv /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch/Arch_rc.py.tmp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch/Arch_rc.py [ 4%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_Mesh.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_Mesh.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_Mesh.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_Mesh.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_Mesh.cpp [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/Dice3DS/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/Dice3DS/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/Dice3DS/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/Dice3DS/__init__.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/Dice3DS/dom3ds.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/Dice3DS/dom3ds.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/Dice3DS/dom3ds.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/Dice3DS/dom3ds.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/Dice3DS/util.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/Dice3DS/util.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/Dice3DS/util.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/Dice3DS/util.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/Init.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/Init.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/Init.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/Init.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/InitGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/InitGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/InitGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/InitGui.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/OfflineRenderingUtils.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/OfflineRenderingUtils.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/OfflineRenderingUtils.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/OfflineRenderingUtils.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/TestArch.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/TestArch.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/TestArch.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/TestArch.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/exportIFC.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/exportIFC.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/exportIFC.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/exportIFC.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/exportIFCHelper.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/exportIFCHelper.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/exportIFCHelper.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/exportIFCHelper.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/exportIFCStructuralTools.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/exportIFCStructuralTools.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/exportIFCStructuralTools.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/exportIFCStructuralTools.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/import3DS.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/import3DS.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/import3DS.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/import3DS.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/importDAE.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/importDAE.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/importDAE.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/importDAE.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/importIFC.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/importIFC.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/importIFC.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/importIFC.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/importIFCHelper.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/importIFCHelper.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/importIFCHelper.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/importIFCHelper.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/importIFClegacy.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/importIFClegacy.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/importIFClegacy.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/importIFClegacy.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/importIFCmulticore.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/importIFCmulticore.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/importIFCmulticore.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/importIFCmulticore.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/importJSON.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/importJSON.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/importJSON.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/importJSON.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/importOBJ.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/importOBJ.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/importOBJ.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/importOBJ.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/importSH3D.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/importSH3D.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/importSH3D.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/importSH3D.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/importSHP.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/importSHP.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/importSHP.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/importSHP.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/importWebGL.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/importWebGL.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/importWebGL.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/importWebGL.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/Presets/ifc_contexts_IFC2X3.json to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Arch/Presets/ifc_contexts_IFC2X3.json cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/Presets/ifc_contexts_IFC2X3.json /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Arch/Presets/ifc_contexts_IFC2X3.json [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/Presets/ifc_contexts_IFC4.json to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Arch/Presets/ifc_contexts_IFC4.json cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/Presets/ifc_contexts_IFC4.json /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Arch/Presets/ifc_contexts_IFC4.json [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/Presets/ifc_products_IFC2X3.json to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Arch/Presets/ifc_products_IFC2X3.json cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/Presets/ifc_products_IFC2X3.json /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Arch/Presets/ifc_products_IFC2X3.json [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/Presets/ifc_products_IFC4.json to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Arch/Presets/ifc_products_IFC4.json cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/Presets/ifc_products_IFC4.json /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Arch/Presets/ifc_products_IFC4.json [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/Presets/ifc_types_IFC2X3.json to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Arch/Presets/ifc_types_IFC2X3.json cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/Presets/ifc_types_IFC2X3.json /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Arch/Presets/ifc_types_IFC2X3.json [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/Presets/ifc_types_IFC4.json to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Arch/Presets/ifc_types_IFC4.json cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/Presets/ifc_types_IFC4.json /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Arch/Presets/ifc_types_IFC4.json [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/Presets/profiles.csv to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Arch/Presets/profiles.csv cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/Presets/profiles.csv /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Arch/Presets/profiles.csv [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/Presets/pset_definitions.csv to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Arch/Presets/pset_definitions.csv cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/Presets/pset_definitions.csv /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Arch/Presets/pset_definitions.csv In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshCell.hxx:23, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshFace.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_FaceOfEdges.hxx:30, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_Mesh.cpp:34: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_ElemIterator.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:34: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/Resources/icons/ArchWorkbench.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Arch/Resources/icons/ArchWorkbench.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Arch/Resources/icons/ArchWorkbench.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Arch/Resources/icons/ArchWorkbench.svg [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch/Arch_rc.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/Arch_rc.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Arch/Arch_rc.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Arch/Arch_rc.py gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 4%] Built target Arch /usr/bin/gmake -f src/Mod/Draft/CMakeFiles/Draft.dir/build.make src/Mod/Draft/CMakeFiles/Draft.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft/CMakeFiles/Draft.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Draft/CMakeFiles/Draft.dir/build.make src/Mod/Draft/CMakeFiles/Draft.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/Draft.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/Draft.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/Draft.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/Draft.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/DraftFillet.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/DraftFillet.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/DraftFillet.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/DraftFillet.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/DraftGeomUtils.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/DraftGeomUtils.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/DraftGeomUtils.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/DraftGeomUtils.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/DraftGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/DraftGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/DraftGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/DraftGui.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/DraftLayer.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/DraftLayer.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/DraftLayer.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/DraftLayer.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/DraftTools.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/DraftTools.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/DraftTools.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/DraftTools.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/DraftVecUtils.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/DraftVecUtils.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/DraftVecUtils.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/DraftVecUtils.py [ 4%] Generating Draft_rc.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/lib64/qt5/bin/rcc --generator=python --compress-algo=zlib --compress=1 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/Resources/Draft.qrc -o /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft/Draft_rc.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && sed /^#\ /d /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft/Draft_rc.py >"/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft/Draft_rc.py.tmp" && mv /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft/Draft_rc.py.tmp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft/Draft_rc.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/Init.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/Init.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/Init.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/Init.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/InitGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/InitGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/InitGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/InitGui.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/TestDraft.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/TestDraft.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/TestDraft.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/TestDraft.py [ 4%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/TestDraftGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/TestDraftGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/TestDraftGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/TestDraftGui.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/WorkingPlane.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/WorkingPlane.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/WorkingPlane.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/WorkingPlane.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/README.md to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/README.md cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/README.md /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/README.md [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/__init__.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/array.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/array.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/array.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/array.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/cut.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/cut.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/cut.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/cut.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/downgrade.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/downgrade.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/downgrade.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/downgrade.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/draftify.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/draftify.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/draftify.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/draftify.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/dxf.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/dxf.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/dxf.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/dxf.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/extrude.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/extrude.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/extrude.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/extrude.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/fuse.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/fuse.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/fuse.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/fuse.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/heal.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/heal.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/heal.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/heal.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/join.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/join.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/join.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/join.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/mirror.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/mirror.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/mirror.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/mirror.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/move.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/move.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/move.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/move.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/offset.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/offset.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/offset.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/offset.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/rotate.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/rotate.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/rotate.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/rotate.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/scale.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/scale.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/scale.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/scale.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/split.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/split.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/split.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/split.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/svg.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/svg.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/svg.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/svg.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/svgshapes.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/svgshapes.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/svgshapes.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/svgshapes.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/svgtext.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/svgtext.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/svgtext.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/svgtext.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/upgrade.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/upgrade.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftfunctions/upgrade.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftfunctions/upgrade.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/__init__.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/arcs.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/arcs.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/arcs.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/arcs.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/circle_inversion.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/circle_inversion.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/circle_inversion.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/circle_inversion.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/circles.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/circles.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/circles.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/circles.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/circles_apollonius.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/circles_apollonius.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/circles_apollonius.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/circles_apollonius.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/circles_incomplete.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/circles_incomplete.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/circles_incomplete.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/circles_incomplete.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/cuboids.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/cuboids.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/cuboids.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/cuboids.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/edges.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/edges.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/edges.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/edges.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/faces.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/faces.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/faces.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/faces.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/fillets.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/fillets.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/fillets.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/fillets.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/general.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/general.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/general.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/general.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/geo_arrays.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/geo_arrays.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/geo_arrays.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/geo_arrays.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/geometry.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/geometry.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/geometry.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/geometry.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/intersections.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/intersections.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/intersections.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/intersections.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/linear_algebra.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/linear_algebra.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/linear_algebra.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/linear_algebra.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/offsets.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/offsets.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/offsets.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/offsets.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/sort_edges.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/sort_edges.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/sort_edges.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/sort_edges.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/wires.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/wires.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftgeoutils/wires.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftgeoutils/wires.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/README.md to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/README.md cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/README.md /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/README.md [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/__init__.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_annotationstyleeditor.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_annotationstyleeditor.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_annotationstyleeditor.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_annotationstyleeditor.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_arcs.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_arcs.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_arcs.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_arcs.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_array_simple.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_array_simple.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_array_simple.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_array_simple.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_arrays.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_arrays.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_arrays.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_arrays.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_base.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_base.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_base.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_base.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_base_original.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_base_original.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_base_original.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_base_original.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_beziers.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_beziers.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_beziers.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_beziers.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_circles.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_circles.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_circles.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_circles.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_circulararray.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_circulararray.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_circulararray.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_circulararray.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_clone.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_clone.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_clone.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_clone.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_dimension_ops.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_dimension_ops.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_dimension_ops.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_dimension_ops.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_dimensions.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_dimensions.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_dimensions.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_dimensions.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_downgrade.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_downgrade.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_downgrade.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_downgrade.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_draft2sketch.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_draft2sketch.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_draft2sketch.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_draft2sketch.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_drawing.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_drawing.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_drawing.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_drawing.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_edit.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_edit.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_edit.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_edit.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_edit_arch_objects.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_edit_arch_objects.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_edit_arch_objects.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_edit_arch_objects.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_edit_base_object.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_edit_base_object.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_edit_base_object.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_edit_base_object.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_edit_draft_objects.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_edit_draft_objects.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_edit_draft_objects.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_edit_draft_objects.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_edit_part_objects.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_edit_part_objects.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_edit_part_objects.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_edit_part_objects.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_edit_sketcher_objects.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_edit_sketcher_objects.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_edit_sketcher_objects.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_edit_sketcher_objects.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_ellipses.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_ellipses.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_ellipses.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_ellipses.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_facebinders.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_facebinders.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_facebinders.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_facebinders.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_fillets.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_fillets.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_fillets.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_fillets.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_grid.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_grid.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_grid.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_grid.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_groups.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_groups.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_groups.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_groups.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_hatch.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_hatch.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_hatch.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_hatch.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_heal.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_heal.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_heal.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_heal.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_join.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_join.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_join.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_join.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_labels.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_labels.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_labels.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_labels.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_layers.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_layers.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_layers.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_layers.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_lines.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_lines.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_lines.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_lines.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_lineslope.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_lineslope.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_lineslope.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_lineslope.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_mirror.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_mirror.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_mirror.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_mirror.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_move.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_move.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_move.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_move.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_offset.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_offset.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_offset.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_offset.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_orthoarray.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_orthoarray.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_orthoarray.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_orthoarray.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_patharray.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_patharray.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_patharray.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_patharray.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_pathtwistedarray.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_pathtwistedarray.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_pathtwistedarray.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_pathtwistedarray.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_planeproxy.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_planeproxy.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_planeproxy.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_planeproxy.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_pointarray.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_pointarray.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_pointarray.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_pointarray.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_points.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_points.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_points.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_points.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_polararray.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_polararray.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_polararray.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_polararray.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_polygons.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_polygons.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_polygons.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_polygons.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_rectangles.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_rectangles.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_rectangles.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_rectangles.py [ 5%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_rotate.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_rotate.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_rotate.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_rotate.py [ 6%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_scale.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_scale.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_scale.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_scale.py [ 6%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_selectplane.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_selectplane.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_selectplane.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_selectplane.py [ 6%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_setstyle.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_setstyle.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_setstyle.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_setstyle.py [ 6%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_shape2dview.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_shape2dview.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_shape2dview.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_shape2dview.py [ 6%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_shapestrings.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_shapestrings.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_shapestrings.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_shapestrings.py [ 6%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_snapper.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_snapper.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_snapper.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_snapper.py [ 6%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_snaps.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_snaps.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_snaps.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_snaps.py [ 6%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_splines.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_splines.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_splines.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_splines.py [ 6%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_split.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_split.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_split.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_split.py [ 6%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_stretch.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_stretch.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_stretch.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_stretch.py [ 6%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_styles.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_styles.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_styles.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_styles.py [ 6%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_subelements.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_subelements.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_subelements.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_subelements.py [ 6%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_texts.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_texts.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_texts.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_texts.py [ 6%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_togglemodes.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_togglemodes.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_togglemodes.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_togglemodes.py [ 6%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_tool_utils.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_tool_utils.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_tool_utils.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_tool_utils.py [ 7%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_trackers.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_trackers.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_trackers.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_trackers.py [ 7%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_trimex.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_trimex.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_trimex.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_trimex.py [ 7%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_upgrade.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_upgrade.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_upgrade.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_upgrade.py [ 7%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_wire2spline.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_wire2spline.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftguitools/gui_wire2spline.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftguitools/gui_wire2spline.py [ 7%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/README.md to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/README.md cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/README.md /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/README.md [ 7%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/__init__.py [ 7%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_arc_3points.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_arc_3points.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_arc_3points.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_arc_3points.py [ 7%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_array.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_array.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_array.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_array.py [ 7%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_bezcurve.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_bezcurve.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_bezcurve.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_bezcurve.py [ 7%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_block.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_block.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_block.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_block.py [ 7%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_bspline.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_bspline.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_bspline.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_bspline.py [ 7%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_circle.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_circle.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_circle.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_circle.py [ 7%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_circulararray.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_circulararray.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_circulararray.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_circulararray.py [ 7%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_clone.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_clone.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_clone.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_clone.py [ 7%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_copy.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_copy.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_copy.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_copy.py [ 7%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_dimension.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_dimension.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_dimension.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_dimension.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_drawingview.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_drawingview.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_drawingview.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_drawingview.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_ellipse.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_ellipse.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_ellipse.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_ellipse.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_facebinder.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_facebinder.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_facebinder.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_facebinder.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_fillet.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_fillet.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_fillet.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_fillet.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_hatch.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_hatch.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_hatch.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_hatch.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_label.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_label.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_label.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_label.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_layer.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_layer.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_layer.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_layer.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_line.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_line.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_line.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_line.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_orthoarray.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_orthoarray.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_orthoarray.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_orthoarray.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_patharray.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_patharray.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_patharray.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_patharray.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_point.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_point.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_point.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_point.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_pointarray.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_pointarray.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_pointarray.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_pointarray.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_polararray.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_polararray.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_polararray.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_polararray.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_polygon.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_polygon.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_polygon.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_polygon.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_rectangle.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_rectangle.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_rectangle.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_rectangle.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_shape2dview.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_shape2dview.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_shape2dview.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_shape2dview.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_shapestring.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_shapestring.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_shapestring.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_shapestring.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_sketch.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_sketch.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_sketch.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_sketch.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_text.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_text.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_text.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_text.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_wire.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_wire.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_wire.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_wire.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_wpproxy.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_wpproxy.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftmake/make_wpproxy.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftmake/make_wpproxy.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/README.md to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/README.md cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/README.md /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/README.md [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/__init__.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/array.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/array.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/array.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/array.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/base.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/base.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/base.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/base.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/bezcurve.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/bezcurve.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/bezcurve.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/bezcurve.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/block.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/block.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/block.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/block.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/bspline.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/bspline.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/bspline.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/bspline.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/circle.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/circle.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/circle.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/circle.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/clone.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/clone.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/clone.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/clone.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/dimension.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/dimension.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/dimension.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/dimension.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/draft_annotation.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/draft_annotation.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/draft_annotation.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/draft_annotation.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/draftlink.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/draftlink.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/draftlink.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/draftlink.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/drawingview.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/drawingview.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/drawingview.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/drawingview.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/ellipse.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/ellipse.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/ellipse.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/ellipse.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/facebinder.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/facebinder.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/facebinder.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/facebinder.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/fillet.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/fillet.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/fillet.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/fillet.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/hatch.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/hatch.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/hatch.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/hatch.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/label.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/label.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/label.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/label.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/layer.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/layer.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/layer.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/layer.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/patharray.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/patharray.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/patharray.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/patharray.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/pathtwistedarray.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/pathtwistedarray.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/pathtwistedarray.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/pathtwistedarray.py [ 8%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/point.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/point.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/point.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/point.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/pointarray.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/pointarray.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/pointarray.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/pointarray.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/polygon.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/polygon.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/polygon.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/polygon.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/rectangle.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/rectangle.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/rectangle.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/rectangle.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/shape2dview.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/shape2dview.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/shape2dview.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/shape2dview.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/shapestring.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/shapestring.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/shapestring.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/shapestring.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/text.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/text.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/text.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/text.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/wire.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/wire.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/wire.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/wire.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/wpproxy.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/wpproxy.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftobjects/wpproxy.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftobjects/wpproxy.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttaskpanels/README.md to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttaskpanels/README.md cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttaskpanels/README.md /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttaskpanels/README.md [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttaskpanels/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttaskpanels/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttaskpanels/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttaskpanels/__init__.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttaskpanels/task_circulararray.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttaskpanels/task_circulararray.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttaskpanels/task_circulararray.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttaskpanels/task_circulararray.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttaskpanels/task_orthoarray.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttaskpanels/task_orthoarray.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttaskpanels/task_orthoarray.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttaskpanels/task_orthoarray.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttaskpanels/task_polararray.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttaskpanels/task_polararray.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttaskpanels/task_polararray.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttaskpanels/task_polararray.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttaskpanels/task_scale.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttaskpanels/task_scale.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttaskpanels/task_scale.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttaskpanels/task_scale.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttaskpanels/task_selectplane.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttaskpanels/task_selectplane.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttaskpanels/task_selectplane.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttaskpanels/task_selectplane.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttaskpanels/task_shapestring.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttaskpanels/task_shapestring.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttaskpanels/task_shapestring.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttaskpanels/task_shapestring.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/README.md to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/README.md cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/README.md /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/README.md [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/__init__.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/auxiliary.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/auxiliary.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/auxiliary.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/auxiliary.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/draft_test_objects.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/draft_test_objects.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/draft_test_objects.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/draft_test_objects.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/test_airfoildat.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/test_airfoildat.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/test_airfoildat.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/test_airfoildat.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/test_creation.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/test_creation.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/test_creation.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/test_creation.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/test_draftgeomutils.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/test_draftgeomutils.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/test_draftgeomutils.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/test_draftgeomutils.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/test_dwg.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/test_dwg.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/test_dwg.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/test_dwg.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/test_dxf.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/test_dxf.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/test_dxf.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/test_dxf.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/test_import.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/test_import.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/test_import.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/test_import.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/test_import_gui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/test_import_gui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/test_import_gui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/test_import_gui.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/test_import_tools.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/test_import_tools.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/test_import_tools.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/test_import_tools.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/test_modification.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/test_modification.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/test_modification.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/test_modification.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/test_oca.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/test_oca.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/test_oca.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/test_oca.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/test_pivy.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/test_pivy.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/test_pivy.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/test_pivy.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/test_svg.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/test_svg.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/drafttests/test_svg.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/drafttests/test_svg.py [ 9%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftutils/README.md to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftutils/README.md cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftutils/README.md /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftutils/README.md [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftutils/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftutils/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftutils/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftutils/__init__.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftutils/groups.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftutils/groups.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftutils/groups.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftutils/groups.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftutils/gui_utils.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftutils/gui_utils.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftutils/gui_utils.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftutils/gui_utils.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftutils/init_draft_statusbar.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftutils/init_draft_statusbar.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftutils/init_draft_statusbar.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftutils/init_draft_statusbar.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftutils/init_tools.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftutils/init_tools.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftutils/init_tools.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftutils/init_tools.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftutils/messages.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftutils/messages.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftutils/messages.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftutils/messages.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftutils/todo.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftutils/todo.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftutils/todo.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftutils/todo.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftutils/translate.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftutils/translate.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftutils/translate.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftutils/translate.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftutils/units.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftutils/units.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftutils/units.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftutils/units.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftutils/utils.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftutils/utils.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftutils/utils.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftutils/utils.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/README.md to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/README.md cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/README.md /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/README.md [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/__init__.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_array.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_array.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_array.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_array.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_base.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_base.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_base.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_base.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_bezcurve.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_bezcurve.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_bezcurve.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_bezcurve.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_bspline.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_bspline.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_bspline.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_bspline.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_circulararray.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_circulararray.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_circulararray.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_circulararray.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_clone.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_clone.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_clone.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_clone.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_dimension.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_dimension.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_dimension.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_dimension.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_draft_annotation.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_draft_annotation.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_draft_annotation.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_draft_annotation.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_draftlink.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_draftlink.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_draftlink.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_draftlink.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_facebinder.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_facebinder.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_facebinder.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_facebinder.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_fillet.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_fillet.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_fillet.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_fillet.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_hatch.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_hatch.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_hatch.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_hatch.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_label.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_label.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_label.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_label.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_layer.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_layer.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_layer.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_layer.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_orthoarray.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_orthoarray.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_orthoarray.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_orthoarray.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_point.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_point.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_point.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_point.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_polararray.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_polararray.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_polararray.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_polararray.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_rectangle.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_rectangle.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_rectangle.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_rectangle.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_shapestring.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_shapestring.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_shapestring.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_shapestring.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_text.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_text.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_text.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_text.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_wire.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_wire.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_wire.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_wire.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_wpproxy.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_wpproxy.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/draftviewproviders/view_wpproxy.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/draftviewproviders/view_wpproxy.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/importAirfoilDAT.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/importAirfoilDAT.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/importAirfoilDAT.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/importAirfoilDAT.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/importDWG.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/importDWG.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/importDWG.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/importDWG.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/importDXF.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/importDXF.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/importDXF.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/importDXF.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/importOCA.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/importOCA.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/importOCA.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/importOCA.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/importSVG.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/importSVG.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/importSVG.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/importSVG.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/Resources/icons/DraftWorkbench.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Draft/Resources/icons/DraftWorkbench.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Draft/Resources/icons/DraftWorkbench.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Draft/Resources/icons/DraftWorkbench.svg [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft/Draft_rc.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/Draft_rc.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Draft/Draft_rc.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Draft/Draft_rc.py gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 10%] Built target Draft /usr/bin/gmake -f src/Mod/Drawing/CMakeFiles/DrawingScripts.dir/build.make src/Mod/Drawing/CMakeFiles/DrawingScripts.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Drawing /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Drawing/CMakeFiles/DrawingScripts.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Drawing/CMakeFiles/DrawingScripts.dir/build.make src/Mod/Drawing/CMakeFiles/DrawingScripts.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/DrawingExample.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Drawing/DrawingExample.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Drawing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/DrawingExample.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Drawing/DrawingExample.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/DrawingPatterns.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Drawing/DrawingPatterns.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Drawing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/DrawingPatterns.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Drawing/DrawingPatterns.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/DrawingTests.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Drawing/DrawingTests.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Drawing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/DrawingTests.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Drawing/DrawingTests.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Init.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Drawing/Init.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Drawing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Init.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Drawing/Init.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/InitGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Drawing/InitGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Drawing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/InitGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Drawing/InitGui.py [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/README.md to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Drawing/README.md cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Drawing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/README.md /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Drawing/README.md [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A0_Landscape_ISO7200.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A0_Landscape_ISO7200.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Drawing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A0_Landscape_ISO7200.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A0_Landscape_ISO7200.svg [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A0_Landscape_plain.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A0_Landscape_plain.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Drawing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A0_Landscape_plain.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A0_Landscape_plain.svg [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A0_Portrait_plain.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A0_Portrait_plain.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Drawing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A0_Portrait_plain.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A0_Portrait_plain.svg [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A1_Landscape_ISO7200.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A1_Landscape_ISO7200.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Drawing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A1_Landscape_ISO7200.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A1_Landscape_ISO7200.svg [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A1_Landscape_plain.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A1_Landscape_plain.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Drawing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A1_Landscape_plain.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A1_Landscape_plain.svg [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A1_Portrait_plain.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A1_Portrait_plain.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Drawing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A1_Portrait_plain.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A1_Portrait_plain.svg [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A2_Landscape_ISO7200.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A2_Landscape_ISO7200.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Drawing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A2_Landscape_ISO7200.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A2_Landscape_ISO7200.svg [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A2_Landscape_plain.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A2_Landscape_plain.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Drawing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A2_Landscape_plain.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A2_Landscape_plain.svg [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A2_Portrait_plain.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A2_Portrait_plain.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Drawing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A2_Portrait_plain.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A2_Portrait_plain.svg [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A3_Landscape.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A3_Landscape.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Drawing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A3_Landscape.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A3_Landscape.svg [ 10%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A3_Landscape_ISO7200.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A3_Landscape_ISO7200.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Drawing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A3_Landscape_ISO7200.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A3_Landscape_ISO7200.svg [ 11%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A3_Landscape_plain.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A3_Landscape_plain.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Drawing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A3_Landscape_plain.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A3_Landscape_plain.svg [ 11%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A3_Portrait_plain.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A3_Portrait_plain.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Drawing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A3_Portrait_plain.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A3_Portrait_plain.svg [ 11%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A4_Landscape.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A4_Landscape.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Drawing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A4_Landscape.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A4_Landscape.svg [ 11%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A4_Landscape_ISO7200.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A4_Landscape_ISO7200.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Drawing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A4_Landscape_ISO7200.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A4_Landscape_ISO7200.svg [ 11%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A4_Landscape_plain.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A4_Landscape_plain.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Drawing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A4_Landscape_plain.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A4_Landscape_plain.svg [ 11%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A4_Portrait_ISO7200.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A4_Portrait_ISO7200.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Drawing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A4_Portrait_ISO7200.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A4_Portrait_ISO7200.svg [ 11%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A4_Portrait_plain.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A4_Portrait_plain.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Drawing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Drawing/Templates/A4_Portrait_plain.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Drawing/Templates/A4_Portrait_plain.svg gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 11%] Built target DrawingScripts /usr/bin/gmake -f src/Mod/Fem/CMakeFiles/FemScriptsTarget.dir/build.make src/Mod/Fem/CMakeFiles/FemScriptsTarget.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem/CMakeFiles/FemScriptsTarget.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Fem/CMakeFiles/FemScriptsTarget.dir/build.make src/Mod/Fem/CMakeFiles/FemScriptsTarget.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 11%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Init.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Init.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Init.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Init.py [ 11%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/InitGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/InitGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/InitGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/InitGui.py [ 11%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/ObjectsFem.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/ObjectsFem.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/ObjectsFem.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/ObjectsFem.py [ 11%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/TestFemApp.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/TestFemApp.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/TestFemApp.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/TestFemApp.py [ 11%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/coding_conventions.md to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/coding_conventions.md cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/coding_conventions.md /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/coding_conventions.md [ 11%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femcommands/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femcommands/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femcommands/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femcommands/__init__.py [ 11%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femcommands/commands.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femcommands/commands.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femcommands/commands.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femcommands/commands.py [ 11%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femcommands/manager.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femcommands/manager.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femcommands/manager.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femcommands/manager.py [ 11%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/__init__.py [ 11%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/boxanalysis_base.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/boxanalysis_base.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/boxanalysis_base.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/boxanalysis_base.py [ 11%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/boxanalysis_frequency.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/boxanalysis_frequency.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/boxanalysis_frequency.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/boxanalysis_frequency.py [ 11%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/boxanalysis_static.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/boxanalysis_static.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/boxanalysis_static.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/boxanalysis_static.py [ 11%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/buckling_lateraltorsionalbuckling.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/buckling_lateraltorsionalbuckling.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/buckling_lateraltorsionalbuckling.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/buckling_lateraltorsionalbuckling.py [ 11%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/buckling_platebuckling.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/buckling_platebuckling.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/buckling_platebuckling.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/buckling_platebuckling.py [ 11%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_buckling_flexuralbuckling.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_buckling_flexuralbuckling.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_buckling_flexuralbuckling.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_buckling_flexuralbuckling.py [ 11%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_base_edge.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_base_edge.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_base_edge.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_base_edge.py [ 11%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_base_face.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_base_face.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_base_face.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_base_face.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_base_solid.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_base_solid.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_base_solid.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_base_solid.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_beam_circle.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_beam_circle.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_beam_circle.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_beam_circle.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_beam_pipe.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_beam_pipe.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_beam_pipe.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_beam_pipe.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_beam_rect.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_beam_rect.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_beam_rect.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_beam_rect.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_ele_hexa20.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_ele_hexa20.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_ele_hexa20.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_ele_hexa20.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_ele_quad4.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_ele_quad4.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_ele_quad4.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_ele_quad4.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_ele_quad8.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_ele_quad8.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_ele_quad8.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_ele_quad8.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_ele_seg2.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_ele_seg2.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_ele_seg2.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_ele_seg2.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_ele_seg3.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_ele_seg3.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_ele_seg3.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_ele_seg3.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_ele_tetra4.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_ele_tetra4.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_ele_tetra4.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_ele_tetra4.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_ele_tria3.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_ele_tria3.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_ele_tria3.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_ele_tria3.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_ele_tria6.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_ele_tria6.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_ele_tria6.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_ele_tria6.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_faceload.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_faceload.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_faceload.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_faceload.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_nodeload.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_nodeload.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_nodeload.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_nodeload.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_prescribeddisplacement.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_prescribeddisplacement.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/ccx_cantilever_prescribeddisplacement.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/ccx_cantilever_prescribeddisplacement.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/constraint_centrif.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/constraint_centrif.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/constraint_centrif.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/constraint_centrif.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/constraint_contact_shell_shell.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/constraint_contact_shell_shell.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/constraint_contact_shell_shell.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/constraint_contact_shell_shell.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/constraint_contact_solid_solid.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/constraint_contact_solid_solid.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/constraint_contact_solid_solid.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/constraint_contact_solid_solid.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/constraint_section_print.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/constraint_section_print.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/constraint_section_print.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/constraint_section_print.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/constraint_selfweight_cantilever.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/constraint_selfweight_cantilever.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/constraint_selfweight_cantilever.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/constraint_selfweight_cantilever.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/constraint_tie.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/constraint_tie.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/constraint_tie.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/constraint_tie.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/constraint_transform_beam_hinged.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/constraint_transform_beam_hinged.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/constraint_transform_beam_hinged.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/constraint_transform_beam_hinged.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/constraint_transform_torque.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/constraint_transform_torque.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/constraint_transform_torque.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/constraint_transform_torque.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/elmer_nonguitutorial01_eigenvalue_of_elastic_beam.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/elmer_nonguitutorial01_eigenvalue_of_elastic_beam.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/elmer_nonguitutorial01_eigenvalue_of_elastic_beam.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/elmer_nonguitutorial01_eigenvalue_of_elastic_beam.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/equation_electrostatics_capacitance_two_balls.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/equation_electrostatics_capacitance_two_balls.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/equation_electrostatics_capacitance_two_balls.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/equation_electrostatics_capacitance_two_balls.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/equation_electrostatics_electricforce_elmer_nongui6.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/equation_electrostatics_electricforce_elmer_nongui6.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/equation_electrostatics_electricforce_elmer_nongui6.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/equation_electrostatics_electricforce_elmer_nongui6.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/examplesgui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/examplesgui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/examplesgui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/examplesgui.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/frequency_beamsimple.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/frequency_beamsimple.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/frequency_beamsimple.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/frequency_beamsimple.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/manager.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/manager.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/manager.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/manager.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/material_multiple_bendingbeam_fiveboxes.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/material_multiple_bendingbeam_fiveboxes.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/material_multiple_bendingbeam_fiveboxes.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/material_multiple_bendingbeam_fiveboxes.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/material_multiple_bendingbeam_fivefaces.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/material_multiple_bendingbeam_fivefaces.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/material_multiple_bendingbeam_fivefaces.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/material_multiple_bendingbeam_fivefaces.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/material_multiple_tensionrod_twoboxes.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/material_multiple_tensionrod_twoboxes.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/material_multiple_tensionrod_twoboxes.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/material_multiple_tensionrod_twoboxes.py [ 12%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/material_nl_platewithhole.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/material_nl_platewithhole.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/material_nl_platewithhole.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/material_nl_platewithhole.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/__init__.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_beamsimple_tetra10.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_beamsimple_tetra10.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_beamsimple_tetra10.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_beamsimple_tetra10.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_boxanalysis_tetra10.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_boxanalysis_tetra10.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_boxanalysis_tetra10.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_boxanalysis_tetra10.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_boxes_2_vertikal_tetra10.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_boxes_2_vertikal_tetra10.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_boxes_2_vertikal_tetra10.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_boxes_2_vertikal_tetra10.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_buckling_ibeam_tria6.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_buckling_ibeam_tria6.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_buckling_ibeam_tria6.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_buckling_ibeam_tria6.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_buckling_plate_tria6.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_buckling_plate_tria6.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_buckling_plate_tria6.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_buckling_plate_tria6.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_canticcx_hexa20.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_canticcx_hexa20.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_canticcx_hexa20.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_canticcx_hexa20.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_canticcx_quad4.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_canticcx_quad4.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_canticcx_quad4.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_canticcx_quad4.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_canticcx_quad8.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_canticcx_quad8.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_canticcx_quad8.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_canticcx_quad8.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_canticcx_seg2.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_canticcx_seg2.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_canticcx_seg2.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_canticcx_seg2.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_canticcx_seg3.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_canticcx_seg3.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_canticcx_seg3.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_canticcx_seg3.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_canticcx_tetra10.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_canticcx_tetra10.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_canticcx_tetra10.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_canticcx_tetra10.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_canticcx_tria3.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_canticcx_tria3.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_canticcx_tria3.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_canticcx_tria3.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_canticcx_tria6.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_canticcx_tria6.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_canticcx_tria6.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_canticcx_tria6.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_capacitance_two_balls_tetra10.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_capacitance_two_balls_tetra10.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_capacitance_two_balls_tetra10.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_capacitance_two_balls_tetra10.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_constraint_centrif_tetra10.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_constraint_centrif_tetra10.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_constraint_centrif_tetra10.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_constraint_centrif_tetra10.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_constraint_tie_tetra10.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_constraint_tie_tetra10.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_constraint_tie_tetra10.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_constraint_tie_tetra10.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_contact_box_halfcylinder_tetra10.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_contact_box_halfcylinder_tetra10.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_contact_box_halfcylinder_tetra10.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_contact_box_halfcylinder_tetra10.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_contact_tube_tube_tria3.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_contact_tube_tube_tria3.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_contact_tube_tube_tria3.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_contact_tube_tube_tria3.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_eigenvalue_of_elastic_beam_tetra10.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_eigenvalue_of_elastic_beam_tetra10.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_eigenvalue_of_elastic_beam_tetra10.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_eigenvalue_of_elastic_beam_tetra10.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_electricforce_elmer_nongui6_tetra10.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_electricforce_elmer_nongui6_tetra10.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_electricforce_elmer_nongui6_tetra10.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_electricforce_elmer_nongui6_tetra10.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_flexural_buckling.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_flexural_buckling.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_flexural_buckling.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_flexural_buckling.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_multibodybeam_tetra10.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_multibodybeam_tetra10.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_multibodybeam_tetra10.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_multibodybeam_tetra10.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_multibodybeam_tria6.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_multibodybeam_tria6.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_multibodybeam_tria6.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_multibodybeam_tria6.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_plate_mystran_quad4.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_plate_mystran_quad4.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_plate_mystran_quad4.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_plate_mystran_quad4.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_platewithhole_tetra10.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_platewithhole_tetra10.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_platewithhole_tetra10.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_platewithhole_tetra10.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_rc_wall_2d_tria6.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_rc_wall_2d_tria6.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_rc_wall_2d_tria6.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_rc_wall_2d_tria6.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_section_print_tetra10.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_section_print_tetra10.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_section_print_tetra10.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_section_print_tetra10.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_selfweight_cantilever_tetra10.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_selfweight_cantilever_tetra10.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_selfweight_cantilever_tetra10.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_selfweight_cantilever_tetra10.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_square_pipe_end_twisted_tria6.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_square_pipe_end_twisted_tria6.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_square_pipe_end_twisted_tria6.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_square_pipe_end_twisted_tria6.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_thermomech_bimetall_tetra10.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_thermomech_bimetall_tetra10.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_thermomech_bimetall_tetra10.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_thermomech_bimetall_tetra10.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_thermomech_flow1d_seg3.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_thermomech_flow1d_seg3.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_thermomech_flow1d_seg3.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_thermomech_flow1d_seg3.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_thermomech_spine_tetra10.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_thermomech_spine_tetra10.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_thermomech_spine_tetra10.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_thermomech_spine_tetra10.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_transform_beam_hinged_tetra10.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_transform_beam_hinged_tetra10.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_transform_beam_hinged_tetra10.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_transform_beam_hinged_tetra10.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_transform_torque_tetra10.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_transform_torque_tetra10.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_transform_torque_tetra10.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_transform_torque_tetra10.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_truss_crane_seg2.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_truss_crane_seg2.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_truss_crane_seg2.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_truss_crane_seg2.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_truss_crane_seg3.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_truss_crane_seg3.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/meshes/mesh_truss_crane_seg3.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/meshes/mesh_truss_crane_seg3.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/mystran_plate.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/mystran_plate.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/mystran_plate.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/mystran_plate.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/rc_wall_2d.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/rc_wall_2d.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/rc_wall_2d.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/rc_wall_2d.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/square_pipe_end_twisted_edgeforces.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/square_pipe_end_twisted_edgeforces.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/square_pipe_end_twisted_edgeforces.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/square_pipe_end_twisted_edgeforces.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/square_pipe_end_twisted_nodeforces.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/square_pipe_end_twisted_nodeforces.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/square_pipe_end_twisted_nodeforces.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/square_pipe_end_twisted_nodeforces.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/thermomech_bimetall.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/thermomech_bimetall.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/thermomech_bimetall.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/thermomech_bimetall.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/thermomech_flow1d.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/thermomech_flow1d.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/thermomech_flow1d.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/thermomech_flow1d.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/thermomech_spine.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/thermomech_spine.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/thermomech_spine.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/thermomech_spine.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/truss_3d_cs_circle_ele_seg2.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/truss_3d_cs_circle_ele_seg2.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/truss_3d_cs_circle_ele_seg2.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/truss_3d_cs_circle_ele_seg2.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/truss_3d_cs_circle_ele_seg3.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/truss_3d_cs_circle_ele_seg3.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femexamples/truss_3d_cs_circle_ele_seg3.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femexamples/truss_3d_cs_circle_ele_seg3.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/__init__.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/convert2TetGen.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/convert2TetGen.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/convert2TetGen.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/convert2TetGen.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/exportNastranMesh.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/exportNastranMesh.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/exportNastranMesh.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/exportNastranMesh.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/importCcxDatResults.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/importCcxDatResults.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/importCcxDatResults.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/importCcxDatResults.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/importCcxFrdResults.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/importCcxFrdResults.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/importCcxFrdResults.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/importCcxFrdResults.py [ 13%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/importFenicsMesh.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/importFenicsMesh.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/importFenicsMesh.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/importFenicsMesh.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/importInpMesh.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/importInpMesh.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/importInpMesh.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/importInpMesh.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/importPyMesh.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/importPyMesh.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/importPyMesh.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/importPyMesh.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/importToolsFem.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/importToolsFem.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/importToolsFem.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/importToolsFem.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/importVTKResults.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/importVTKResults.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/importVTKResults.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/importVTKResults.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/importYamlJsonMesh.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/importYamlJsonMesh.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/importYamlJsonMesh.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/importYamlJsonMesh.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/importZ88Mesh.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/importZ88Mesh.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/importZ88Mesh.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/importZ88Mesh.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/importZ88O2Results.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/importZ88O2Results.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/importZ88O2Results.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/importZ88O2Results.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/readFenicsXDMF.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/readFenicsXDMF.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/readFenicsXDMF.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/readFenicsXDMF.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/readFenicsXML.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/readFenicsXML.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/readFenicsXML.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/readFenicsXML.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/writeFenicsXDMF.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/writeFenicsXDMF.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/writeFenicsXDMF.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/writeFenicsXDMF.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/writeFenicsXML.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/writeFenicsXML.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/feminout/writeFenicsXML.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/feminout/writeFenicsXML.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femmesh/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femmesh/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femmesh/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femmesh/__init__.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femmesh/femmesh2mesh.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femmesh/femmesh2mesh.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femmesh/femmesh2mesh.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femmesh/femmesh2mesh.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femmesh/gmshtools.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femmesh/gmshtools.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femmesh/gmshtools.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femmesh/gmshtools.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femmesh/meshsetsgetter.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femmesh/meshsetsgetter.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femmesh/meshsetsgetter.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femmesh/meshsetsgetter.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femmesh/meshtools.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femmesh/meshtools.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femmesh/meshtools.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femmesh/meshtools.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/__init__.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/base_fempythonobject.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/base_fempythonobject.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/base_fempythonobject.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/base_fempythonobject.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/constant_vacuumpermittivity.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/constant_vacuumpermittivity.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/constant_vacuumpermittivity.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/constant_vacuumpermittivity.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/constraint_bodyheatsource.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/constraint_bodyheatsource.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/constraint_bodyheatsource.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/constraint_bodyheatsource.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/constraint_centrif.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/constraint_centrif.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/constraint_centrif.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/constraint_centrif.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/constraint_electrostaticpotential.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/constraint_electrostaticpotential.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/constraint_electrostaticpotential.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/constraint_electrostaticpotential.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/constraint_flowvelocity.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/constraint_flowvelocity.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/constraint_flowvelocity.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/constraint_flowvelocity.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/constraint_initialflowvelocity.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/constraint_initialflowvelocity.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/constraint_initialflowvelocity.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/constraint_initialflowvelocity.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/constraint_sectionprint.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/constraint_sectionprint.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/constraint_sectionprint.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/constraint_sectionprint.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/constraint_selfweight.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/constraint_selfweight.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/constraint_selfweight.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/constraint_selfweight.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/constraint_tie.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/constraint_tie.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/constraint_tie.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/constraint_tie.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/element_fluid1D.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/element_fluid1D.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/element_fluid1D.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/element_fluid1D.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/element_geometry1D.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/element_geometry1D.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/element_geometry1D.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/element_geometry1D.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/element_geometry2D.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/element_geometry2D.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/element_geometry2D.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/element_geometry2D.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/element_rotation1D.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/element_rotation1D.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/element_rotation1D.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/element_rotation1D.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/material_common.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/material_common.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/material_common.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/material_common.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/material_mechanicalnonlinear.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/material_mechanicalnonlinear.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/material_mechanicalnonlinear.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/material_mechanicalnonlinear.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/material_reinforced.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/material_reinforced.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/material_reinforced.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/material_reinforced.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/mesh_boundarylayer.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/mesh_boundarylayer.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/mesh_boundarylayer.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/mesh_boundarylayer.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/mesh_gmsh.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/mesh_gmsh.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/mesh_gmsh.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/mesh_gmsh.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/mesh_group.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/mesh_group.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/mesh_group.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/mesh_group.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/mesh_region.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/mesh_region.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/mesh_region.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/mesh_region.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/mesh_result.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/mesh_result.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/mesh_result.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/mesh_result.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/result_mechanical.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/result_mechanical.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/result_mechanical.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/result_mechanical.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/solver_ccxtools.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/solver_ccxtools.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femobjects/solver_ccxtools.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femobjects/solver_ccxtools.py [ 14%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femresult/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femresult/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femresult/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femresult/__init__.py [ 15%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femresult/resulttools.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femresult/resulttools.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femresult/resulttools.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femresult/resulttools.py [ 15%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/__init__.py [ 15%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/__init__.py [ 15%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/solver.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/solver.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/solver.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/solver.py [ 15%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/tasks.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/tasks.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/tasks.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/tasks.py [ 15%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_Mesh0DElement.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_Mesh0DElement.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_Mesh0DElement.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_Mesh0DElement.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_Mesh0DElement.cpp [ 15%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_constraint_centrif.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_constraint_centrif.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_constraint_centrif.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_constraint_centrif.py [ 15%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_constraint_contact.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_constraint_contact.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_constraint_contact.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_constraint_contact.py [ 15%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_constraint_displacement.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_constraint_displacement.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_constraint_displacement.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_constraint_displacement.py [ 15%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_constraint_fixed.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_constraint_fixed.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_constraint_fixed.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_constraint_fixed.py [ 15%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_constraint_fluidsection.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_constraint_fluidsection.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_constraint_fluidsection.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_constraint_fluidsection.py [ 15%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_constraint_force.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_constraint_force.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_constraint_force.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_constraint_force.py [ 15%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_constraint_heatflux.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_constraint_heatflux.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_constraint_heatflux.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_constraint_heatflux.py [ 15%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_constraint_initialtemperature.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_constraint_initialtemperature.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_constraint_initialtemperature.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_constraint_initialtemperature.py [ 15%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_constraint_planerotation.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_constraint_planerotation.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_constraint_planerotation.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_constraint_planerotation.py [ 15%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_constraint_pressure.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_constraint_pressure.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_constraint_pressure.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_constraint_pressure.py [ 15%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_constraint_sectionprint.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_constraint_sectionprint.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_constraint_sectionprint.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_constraint_sectionprint.py [ 15%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_constraint_selfweight.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_constraint_selfweight.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_constraint_selfweight.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_constraint_selfweight.py [ 15%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_constraint_temperature.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_constraint_temperature.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_constraint_temperature.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_constraint_temperature.py [ 15%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_constraint_tie.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_constraint_tie.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_constraint_tie.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_constraint_tie.py [ 15%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_constraint_transform.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_constraint_transform.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_constraint_transform.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_constraint_transform.py [ 15%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_femelement_geometry.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_femelement_geometry.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_femelement_geometry.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_femelement_geometry.py [ 15%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_femelement_material.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_femelement_material.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_femelement_material.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_femelement_material.py [ 15%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_femelement_matgeosets.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_femelement_matgeosets.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_femelement_matgeosets.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_femelement_matgeosets.py [ 15%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_footer.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_footer.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_footer.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_footer.py [ 15%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_mesh.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_mesh.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_mesh.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_mesh.py [ 15%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_step_equation.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_step_equation.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_step_equation.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_step_equation.py [ 15%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_step_output.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_step_output.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/write_step_output.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/write_step_output.py [ 15%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/writer.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/writer.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/calculix/writer.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/calculix/writer.py [ 15%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/elmer/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/elmer/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/elmer/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/elmer/__init__.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/elmer/equations/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/elmer/equations/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/elmer/equations/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/elmer/equations/__init__.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/elmer/equations/elasticity.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/elmer/equations/elasticity.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/elmer/equations/elasticity.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/elmer/equations/elasticity.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/elmer/equations/electricforce.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/elmer/equations/electricforce.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/elmer/equations/electricforce.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/elmer/equations/electricforce.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/elmer/equations/electrostatic.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/elmer/equations/electrostatic.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/elmer/equations/electrostatic.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/elmer/equations/electrostatic.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/elmer/equations/equation.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/elmer/equations/equation.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/elmer/equations/equation.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/elmer/equations/equation.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/elmer/equations/flow.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/elmer/equations/flow.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/elmer/equations/flow.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/elmer/equations/flow.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/elmer/equations/flux.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/elmer/equations/flux.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/elmer/equations/flux.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/elmer/equations/flux.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/elmer/equations/heat.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/elmer/equations/heat.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/elmer/equations/heat.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/elmer/equations/heat.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/elmer/equations/linear.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/elmer/equations/linear.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/elmer/equations/linear.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/elmer/equations/linear.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/elmer/equations/nonlinear.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/elmer/equations/nonlinear.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/elmer/equations/nonlinear.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/elmer/equations/nonlinear.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/elmer/sifio.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/elmer/sifio.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/elmer/sifio.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/elmer/sifio.py In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshCell.hxx:23, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_Mesh0DElement.hxx:29, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_Mesh0DElement.cpp:28: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_ElemIterator.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:34: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/elmer/solver.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/elmer/solver.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/elmer/solver.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/elmer/solver.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/elmer/tasks.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/elmer/tasks.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/elmer/tasks.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/elmer/tasks.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/elmer/writer.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/elmer/writer.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/elmer/writer.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/elmer/writer.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/equationbase.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/equationbase.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/equationbase.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/equationbase.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/fenics/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/fenics/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/fenics/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/fenics/__init__.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/fenics/fenics_tools.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/fenics/fenics_tools.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/fenics/fenics_tools.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/fenics/fenics_tools.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/mystran/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/mystran/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/mystran/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/mystran/__init__.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/mystran/add_con_fixed.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/mystran/add_con_fixed.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/mystran/add_con_fixed.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/mystran/add_con_fixed.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/mystran/add_con_force.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/mystran/add_con_force.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/mystran/add_con_force.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/mystran/add_con_force.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/mystran/add_femelement_geometry.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/mystran/add_femelement_geometry.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/mystran/add_femelement_geometry.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/mystran/add_femelement_geometry.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/mystran/add_femelement_material.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/mystran/add_femelement_material.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/mystran/add_femelement_material.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/mystran/add_femelement_material.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/mystran/add_mesh.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/mystran/add_mesh.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/mystran/add_mesh.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/mystran/add_mesh.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/mystran/add_solver_control.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/mystran/add_solver_control.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/mystran/add_solver_control.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/mystran/add_solver_control.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/mystran/solver.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/mystran/solver.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/mystran/solver.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/mystran/solver.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/mystran/tasks.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/mystran/tasks.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/mystran/tasks.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/mystran/tasks.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/mystran/writer.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/mystran/writer.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/mystran/writer.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/mystran/writer.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/report.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/report.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/report.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/report.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/reportdialog.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/reportdialog.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/reportdialog.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/reportdialog.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/run.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/run.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/run.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/run.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/settings.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/settings.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/settings.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/settings.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/signal.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/signal.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/signal.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/signal.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/solver_taskpanel.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/solver_taskpanel.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/solver_taskpanel.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/solver_taskpanel.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/solverbase.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/solverbase.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/solverbase.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/solverbase.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/task.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/task.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/task.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/task.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/writerbase.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/writerbase.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/writerbase.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/writerbase.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/z88/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/z88/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/z88/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/z88/__init__.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/z88/solver.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/z88/solver.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/z88/solver.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/z88/solver.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/z88/tasks.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/z88/tasks.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/z88/tasks.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/z88/tasks.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/z88/writer.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/z88/writer.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femsolver/z88/writer.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femsolver/z88/writer.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/__init__.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/app/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/app/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/app/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/app/__init__.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/app/support_utils.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/app/support_utils.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/app/support_utils.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/app/support_utils.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/app/test_ccxtools.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/app/test_ccxtools.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/app/test_ccxtools.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/app/test_ccxtools.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/app/test_common.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/app/test_common.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/app/test_common.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/app/test_common.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/app/test_femimport.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/app/test_femimport.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/app/test_femimport.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/app/test_femimport.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/app/test_material.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/app/test_material.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/app/test_material.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/app/test_material.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/app/test_mesh.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/app/test_mesh.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/app/test_mesh.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/app/test_mesh.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/app/test_object.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/app/test_object.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/app/test_object.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/app/test_object.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/app/test_open.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/app/test_open.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/app/test_open.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/app/test_open.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/app/test_result.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/app/test_result.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/app/test_result.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/app/test_result.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/app/test_solver_calculix.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/app/test_solver_calculix.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/app/test_solver_calculix.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/app/test_solver_calculix.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/app/test_solver_elmer.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/app/test_solver_elmer.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/app/test_solver_elmer.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/app/test_solver_elmer.py [ 16%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/app/test_solver_mystran.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/app/test_solver_mystran.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/app/test_solver_mystran.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/app/test_solver_mystran.py [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/app/test_solver_z88.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/app/test_solver_z88.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/app/test_solver_z88.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/app/test_solver_z88.py [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/__init__.py [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/__init__.py [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/box.FCStd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/box.FCStd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/box.FCStd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/box.FCStd [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/box_frequency.FCStd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/box_frequency.FCStd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/box_frequency.FCStd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/box_frequency.FCStd [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/box_frequency.dat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/box_frequency.dat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/box_frequency.dat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/box_frequency.dat [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/box_frequency.frd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/box_frequency.frd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/box_frequency.frd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/box_frequency.frd [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/box_frequency.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/box_frequency.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/box_frequency.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/box_frequency.inp [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/box_frequency_expected_values to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/box_frequency_expected_values cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/box_frequency_expected_values /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/box_frequency_expected_values [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/box_static.FCStd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/box_static.FCStd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/box_static.FCStd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/box_static.FCStd [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/box_static.dat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/box_static.dat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/box_static.dat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/box_static.dat [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/box_static.frd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/box_static.frd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/box_static.frd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/box_static.frd [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/box_static.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/box_static.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/box_static.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/box_static.inp [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/box_static_expected_values to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/box_static_expected_values cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/box_static_expected_values /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/box_static_expected_values [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/ccx_buckling_flexuralbuckling.dat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/ccx_buckling_flexuralbuckling.dat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/ccx_buckling_flexuralbuckling.dat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/ccx_buckling_flexuralbuckling.dat [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/ccx_buckling_flexuralbuckling.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/ccx_buckling_flexuralbuckling.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/ccx_buckling_flexuralbuckling.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/ccx_buckling_flexuralbuckling.inp [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_beam_circle.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/ccx_cantilever_beam_circle.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_beam_circle.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/ccx_cantilever_beam_circle.inp [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_beam_pipe.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/ccx_cantilever_beam_pipe.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_beam_pipe.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/ccx_cantilever_beam_pipe.inp [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_beam_rect.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/ccx_cantilever_beam_rect.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_beam_rect.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/ccx_cantilever_beam_rect.inp [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_hexa20.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_hexa20.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_hexa20.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_hexa20.inp [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_quad4.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_quad4.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_quad4.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_quad4.inp [ 17%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshCell.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshCell.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshCell.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshCell.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshCell.cpp [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_quad8.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_quad8.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_quad8.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_quad8.inp [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_seg2.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_seg2.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_seg2.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_seg2.inp [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_seg3.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_seg3.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_seg3.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_seg3.inp [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_tria3.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_tria3.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_tria3.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_tria3.inp [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_tria6.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_tria6.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_tria6.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/ccx_cantilever_ele_tria6.inp [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_faceload.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/ccx_cantilever_faceload.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_faceload.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/ccx_cantilever_faceload.inp [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_nodeload.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/ccx_cantilever_nodeload.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_nodeload.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/ccx_cantilever_nodeload.inp [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_prescribeddisplacement.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/ccx_cantilever_prescribeddisplacement.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/ccx_cantilever_prescribeddisplacement.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/ccx_cantilever_prescribeddisplacement.inp [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/constraint_centrif.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/constraint_centrif.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/constraint_centrif.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/constraint_centrif.inp [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/constraint_contact_shell_shell.FCStd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/constraint_contact_shell_shell.FCStd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/constraint_contact_shell_shell.FCStd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/constraint_contact_shell_shell.FCStd [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/constraint_contact_shell_shell.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/constraint_contact_shell_shell.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/constraint_contact_shell_shell.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/constraint_contact_shell_shell.inp [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/constraint_contact_solid_solid.FCStd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/constraint_contact_solid_solid.FCStd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/constraint_contact_solid_solid.FCStd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/constraint_contact_solid_solid.FCStd [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/constraint_contact_solid_solid.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/constraint_contact_solid_solid.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/constraint_contact_solid_solid.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/constraint_contact_solid_solid.inp [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/constraint_sectionprint.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/constraint_sectionprint.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/constraint_sectionprint.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/constraint_sectionprint.inp [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/constraint_selfweight_cantilever.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/constraint_selfweight_cantilever.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/constraint_selfweight_cantilever.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/constraint_selfweight_cantilever.inp [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/constraint_tie.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/constraint_tie.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/constraint_tie.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/constraint_tie.inp [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/constraint_transform_beam_hinged.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/constraint_transform_beam_hinged.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/constraint_transform_beam_hinged.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/constraint_transform_beam_hinged.inp [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/constraint_transform_torque.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/constraint_transform_torque.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/constraint_transform_torque.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/constraint_transform_torque.inp [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/frequency_beamsimple.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/frequency_beamsimple.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/frequency_beamsimple.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/frequency_beamsimple.inp [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/material_multiple_bendingbeam_fiveboxes.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/material_multiple_bendingbeam_fiveboxes.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/material_multiple_bendingbeam_fiveboxes.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/material_multiple_bendingbeam_fiveboxes.inp [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/material_multiple_bendingbeam_fivefaces.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/material_multiple_bendingbeam_fivefaces.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/material_multiple_bendingbeam_fivefaces.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/material_multiple_bendingbeam_fivefaces.inp [ 17%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/material_multiple_tensionrod_twoboxes.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/material_multiple_tensionrod_twoboxes.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/material_multiple_tensionrod_twoboxes.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/material_multiple_tensionrod_twoboxes.inp [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/material_nonlinear.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/material_nonlinear.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/material_nonlinear.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/material_nonlinear.inp [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/square_pipe_end_twisted_edgeforces.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/square_pipe_end_twisted_edgeforces.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/square_pipe_end_twisted_edgeforces.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/square_pipe_end_twisted_edgeforces.inp [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/square_pipe_end_twisted_nodeforces.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/square_pipe_end_twisted_nodeforces.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/square_pipe_end_twisted_nodeforces.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/square_pipe_end_twisted_nodeforces.inp [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/thermomech_bimetall.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/thermomech_bimetall.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/thermomech_bimetall.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/thermomech_bimetall.inp [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D.FCStd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/thermomech_flow1D.FCStd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D.FCStd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/thermomech_flow1D.FCStd [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D.dat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/thermomech_flow1D.dat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D.dat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/thermomech_flow1D.dat [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D.frd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/thermomech_flow1D.frd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D.frd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/thermomech_flow1D.frd [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/thermomech_flow1D.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/thermomech_flow1D.inp [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D_expected_values to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/thermomech_flow1D_expected_values cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D_expected_values /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/thermomech_flow1D_expected_values [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D_inout_nodes.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/thermomech_flow1D_inout_nodes.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D_inout_nodes.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/thermomech_flow1D_inout_nodes.txt [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/thermomech_spine.FCStd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/thermomech_spine.FCStd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/thermomech_spine.FCStd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/thermomech_spine.FCStd In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshCell.hxx:23, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshCell.cpp:20: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_ElemIterator.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:34: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/thermomech_spine.dat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/thermomech_spine.dat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/thermomech_spine.dat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/thermomech_spine.dat [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/thermomech_spine.frd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/thermomech_spine.frd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/thermomech_spine.frd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/thermomech_spine.frd [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/thermomech_spine.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/thermomech_spine.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/thermomech_spine.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/thermomech_spine.inp [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/thermomech_spine_expected_values to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/thermomech_spine_expected_values cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/calculix/thermomech_spine_expected_values /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/calculix/thermomech_spine_expected_values [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/elmer/ELMERSOLVER_STARTINFO to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/elmer/ELMERSOLVER_STARTINFO cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/elmer/ELMERSOLVER_STARTINFO /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/elmer/ELMERSOLVER_STARTINFO [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/elmer/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/elmer/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/elmer/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/elmer/__init__.py [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/elmer/box_static_0_mm.sif to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/elmer/box_static_0_mm.sif cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/elmer/box_static_0_mm.sif /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/elmer/box_static_0_mm.sif [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/elmer/ccxcantilever_faceload_0_mm.sif to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/elmer/ccxcantilever_faceload_0_mm.sif cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/elmer/ccxcantilever_faceload_0_mm.sif /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/elmer/ccxcantilever_faceload_0_mm.sif [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/elmer/ccxcantilever_faceload_1_si.sif to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/elmer/ccxcantilever_faceload_1_si.sif cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/elmer/ccxcantilever_faceload_1_si.sif /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/elmer/ccxcantilever_faceload_1_si.sif [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/elmer/ccxcantilever_nodeload_0_mm.sif to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/elmer/ccxcantilever_nodeload_0_mm.sif cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/elmer/ccxcantilever_nodeload_0_mm.sif /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/elmer/ccxcantilever_nodeload_0_mm.sif [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/elmer/ccxcantilever_prescribeddisplacement_0_mm.sif to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/elmer/ccxcantilever_prescribeddisplacement_0_mm.sif cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/elmer/ccxcantilever_prescribeddisplacement_0_mm.sif /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/elmer/ccxcantilever_prescribeddisplacement_0_mm.sif [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/elmer/group_mesh.geo to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/elmer/group_mesh.geo cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/elmer/group_mesh.geo /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/elmer/group_mesh.geo [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/mesh/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/mesh/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/mesh/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/mesh/__init__.py [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/mesh/tetra10_mesh.inp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/mesh/tetra10_mesh.inp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/mesh/tetra10_mesh.inp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/mesh/tetra10_mesh.inp [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/mesh/tetra10_mesh.unv to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/mesh/tetra10_mesh.unv cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/mesh/tetra10_mesh.unv /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/mesh/tetra10_mesh.unv [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/mesh/tetra10_mesh.vtk to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/mesh/tetra10_mesh.vtk cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/mesh/tetra10_mesh.vtk /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/mesh/tetra10_mesh.vtk [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/mesh/tetra10_mesh.yml to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/mesh/tetra10_mesh.yml cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/mesh/tetra10_mesh.yml /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/mesh/tetra10_mesh.yml [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/mesh/tetra10_mesh.z88 to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/mesh/tetra10_mesh.z88 cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/mesh/tetra10_mesh.z88 /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/mesh/tetra10_mesh.z88 [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/mystran/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/mystran/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/mystran/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/mystran/__init__.py [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/mystran/ccx_cantilever_ele_quad4.bdf to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/mystran/ccx_cantilever_ele_quad4.bdf cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/mystran/ccx_cantilever_ele_quad4.bdf /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/mystran/ccx_cantilever_ele_quad4.bdf [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/mystran/ccx_cantilever_ele_seg2.bdf to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/mystran/ccx_cantilever_ele_seg2.bdf cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/mystran/ccx_cantilever_ele_seg2.bdf /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/mystran/ccx_cantilever_ele_seg2.bdf [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/mystran/ccx_cantilever_ele_tria3.bdf to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/mystran/ccx_cantilever_ele_tria3.bdf cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/mystran/ccx_cantilever_ele_tria3.bdf /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/mystran/ccx_cantilever_ele_tria3.bdf [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/mystran/ccx_cantilever_faceload.bdf to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/mystran/ccx_cantilever_faceload.bdf cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/mystran/ccx_cantilever_faceload.bdf /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/mystran/ccx_cantilever_faceload.bdf [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/mystran/ccx_cantilever_nodeload.bdf to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/mystran/ccx_cantilever_nodeload.bdf cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/mystran/ccx_cantilever_nodeload.bdf /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/mystran/ccx_cantilever_nodeload.bdf [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/mystran/mystran_plate.bdf to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/mystran/mystran_plate.bdf cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/mystran/mystran_plate.bdf /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/mystran/mystran_plate.bdf [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/open/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/open/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/open/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/open/__init__.py [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/open/all_objects_de9b3fb438.FCStd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/open/all_objects_de9b3fb438.FCStd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/open/all_objects_de9b3fb438.FCStd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/open/all_objects_de9b3fb438.FCStd [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/__init__.py [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/51.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/51.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/51.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/51.txt [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88.dyn to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88.dyn cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88.dyn /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88.dyn [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88elp.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88elp.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88elp.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88elp.txt [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88i1.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88i1.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88i1.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88i1.txt [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88i2.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88i2.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88i2.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88i2.txt [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88i5.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88i5.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88i5.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88i5.txt [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88int.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88int.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88int.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88int.txt [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88man.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88man.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88man.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88man.txt [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88mat.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88mat.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88mat.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_hexa20/z88mat.txt [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/51.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/51.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/51.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/51.txt [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88.dyn to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88.dyn cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88.dyn /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88.dyn [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88elp.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88elp.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88elp.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88elp.txt [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88i1.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88i1.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88i1.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88i1.txt [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88i2.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88i2.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88i2.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88i2.txt [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88i5.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88i5.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88i5.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88i5.txt [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88int.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88int.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88int.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88int.txt [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88man.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88man.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88man.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88man.txt [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88mat.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88mat.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88mat.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_ele_tria6/z88mat.txt [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/51.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/51.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/51.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/51.txt [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88.dyn to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88.dyn cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88.dyn /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88.dyn [ 18%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88elp.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88elp.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88elp.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88elp.txt [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88i1.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88i1.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88i1.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88i1.txt [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88i2.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88i2.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88i2.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88i2.txt [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88i5.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88i5.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88i5.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88i5.txt [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88int.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88int.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88int.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88int.txt [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88man.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88man.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88man.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88man.txt [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88mat.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88mat.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88mat.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_faceload/z88mat.txt [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/51.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/51.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/51.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/51.txt [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88.dyn to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88.dyn cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88.dyn /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88.dyn [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88elp.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88elp.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88elp.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88elp.txt [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88i1.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88i1.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88i1.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88i1.txt [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88i2.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88i2.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88i2.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88i2.txt [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88i5.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88i5.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88i5.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88i5.txt [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88int.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88int.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88int.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88int.txt [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88man.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88man.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88man.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88man.txt [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88mat.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88mat.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88mat.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/data/z88/ccx_cantilever_nodeload/z88mat.txt [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/test_commands.sh to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/test_commands.sh cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/test_commands.sh /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/test_commands.sh [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/test_information.md to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/test_information.md cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/test_information.md /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/test_information.md [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtools/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtools/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtools/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtools/__init__.py [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtools/ccxtools.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtools/ccxtools.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtools/ccxtools.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtools/ccxtools.py [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtools/checksanalysis.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtools/checksanalysis.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtools/checksanalysis.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtools/checksanalysis.py [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtools/constants.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtools/constants.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtools/constants.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtools/constants.py [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtools/errors.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtools/errors.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtools/errors.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtools/errors.py [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtools/femutils.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtools/femutils.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtools/femutils.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtools/femutils.py [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtools/geomtools.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtools/geomtools.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtools/geomtools.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtools/geomtools.py [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtools/membertools.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtools/membertools.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtools/membertools.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtools/membertools.py [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtools/migrate_app.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtools/migrate_app.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtools/migrate_app.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtools/migrate_app.py [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtools/tokrules.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtools/tokrules.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtools/tokrules.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtools/tokrules.py gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 19%] Built target FemScriptsTarget /usr/bin/gmake -f src/Mod/Fem/CMakeFiles/FemGuiScriptsTarget.dir/build.make src/Mod/Fem/CMakeFiles/FemGuiScriptsTarget.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem/CMakeFiles/FemGuiScriptsTarget.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Fem/CMakeFiles/FemGuiScriptsTarget.dir/build.make src/Mod/Fem/CMakeFiles/FemGuiScriptsTarget.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/TestFemGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/TestFemGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/TestFemGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/TestFemGui.py [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femguiobjects/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femguiobjects/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femguiobjects/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femguiobjects/__init__.py [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femguiobjects/readme.md to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femguiobjects/readme.md cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femguiobjects/readme.md /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femguiobjects/readme.md [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femguiutils/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femguiutils/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femguiutils/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femguiutils/__init__.py [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femguiutils/migrate_gui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femguiutils/migrate_gui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femguiutils/migrate_gui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femguiutils/migrate_gui.py [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femguiutils/selection_widgets.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femguiutils/selection_widgets.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femguiutils/selection_widgets.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femguiutils/selection_widgets.py [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/__init__.py [ 19%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshEdge.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshEdge.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshEdge.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshEdge.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshEdge.cpp [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_constraint_centrif.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_constraint_centrif.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_constraint_centrif.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_constraint_centrif.py [ 19%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_constraint_electrostaticpotential.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_constraint_electrostaticpotential.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_constraint_electrostaticpotential.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_constraint_electrostaticpotential.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_constraint_flowvelocity.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_constraint_flowvelocity.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_constraint_flowvelocity.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_constraint_flowvelocity.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_constraint_initialflowvelocity.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_constraint_initialflowvelocity.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_constraint_initialflowvelocity.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_constraint_initialflowvelocity.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_constraint_sectionprint.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_constraint_sectionprint.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_constraint_sectionprint.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_constraint_sectionprint.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_constraint_tie.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_constraint_tie.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_constraint_tie.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_constraint_tie.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_element_fluid1D.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_element_fluid1D.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_element_fluid1D.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_element_fluid1D.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_element_geometry1D.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_element_geometry1D.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_element_geometry1D.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_element_geometry1D.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_element_geometry2D.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_element_geometry2D.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_element_geometry2D.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_element_geometry2D.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_element_rotation1D.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_element_rotation1D.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_element_rotation1D.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_element_rotation1D.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_material_common.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_material_common.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_material_common.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_material_common.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_material_reinforced.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_material_reinforced.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_material_reinforced.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_material_reinforced.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_mesh_boundarylayer.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_mesh_boundarylayer.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_mesh_boundarylayer.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_mesh_boundarylayer.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_mesh_gmsh.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_mesh_gmsh.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_mesh_gmsh.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_mesh_gmsh.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_mesh_group.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_mesh_group.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_mesh_group.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_mesh_group.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_mesh_region.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_mesh_region.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_mesh_region.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_mesh_region.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_result_mechanical.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_result_mechanical.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_result_mechanical.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_result_mechanical.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_solver_ccxtools.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_solver_ccxtools.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtaskpanels/task_solver_ccxtools.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtaskpanels/task_solver_ccxtools.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/gui/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/gui/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/gui/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/gui/__init__.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/gui/test_open.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/gui/test_open.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femtest/gui/test_open.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femtest/gui/test_open.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/__init__.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_base_femconstraint.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_base_femconstraint.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_base_femconstraint.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_base_femconstraint.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_base_femobject.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_base_femobject.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_base_femobject.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_base_femobject.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_constant_vacuumpermittivity.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_constant_vacuumpermittivity.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_constant_vacuumpermittivity.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_constant_vacuumpermittivity.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_constraint_bodyheatsource.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_constraint_bodyheatsource.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_constraint_bodyheatsource.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_constraint_bodyheatsource.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_constraint_centrif.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_constraint_centrif.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_constraint_centrif.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_constraint_centrif.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_constraint_electrostaticpotential.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_constraint_electrostaticpotential.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_constraint_electrostaticpotential.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_constraint_electrostaticpotential.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_constraint_flowvelocity.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_constraint_flowvelocity.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_constraint_flowvelocity.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_constraint_flowvelocity.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_constraint_initialflowvelocity.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_constraint_initialflowvelocity.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_constraint_initialflowvelocity.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_constraint_initialflowvelocity.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_constraint_sectionprint.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_constraint_sectionprint.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_constraint_sectionprint.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_constraint_sectionprint.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_constraint_selfweight.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_constraint_selfweight.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_constraint_selfweight.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_constraint_selfweight.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_constraint_tie.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_constraint_tie.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_constraint_tie.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_constraint_tie.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_element_fluid1D.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_element_fluid1D.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_element_fluid1D.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_element_fluid1D.py In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshCell.hxx:23, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshEdge.hxx:29, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshEdge.cpp:20: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_ElemIterator.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:34: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_element_geometry1D.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_element_geometry1D.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_element_geometry1D.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_element_geometry1D.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_element_geometry2D.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_element_geometry2D.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_element_geometry2D.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_element_geometry2D.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_element_rotation1D.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_element_rotation1D.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_element_rotation1D.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_element_rotation1D.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_material_common.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_material_common.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_material_common.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_material_common.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_material_mechanicalnonlinear.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_material_mechanicalnonlinear.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_material_mechanicalnonlinear.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_material_mechanicalnonlinear.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_material_reinforced.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_material_reinforced.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_material_reinforced.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_material_reinforced.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_mesh_boundarylayer.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_mesh_boundarylayer.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_mesh_boundarylayer.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_mesh_boundarylayer.py [ 20%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_mesh_gmsh.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_mesh_gmsh.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_mesh_gmsh.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_mesh_gmsh.py [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_mesh_group.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_mesh_group.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_mesh_group.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_mesh_group.py [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_mesh_region.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_mesh_region.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_mesh_region.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_mesh_region.py [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_mesh_result.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_mesh_result.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_mesh_result.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_mesh_result.py [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_result_mechanical.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_result_mechanical.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_result_mechanical.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_result_mechanical.py [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_solver_ccxtools.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_solver_ccxtools.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/femviewprovider/view_solver_ccxtools.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/femviewprovider/view_solver_ccxtools.py gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 21%] Built target FemGuiScriptsTarget /usr/bin/gmake -f src/Mod/Fem/Gui/CMakeFiles/FemPythonUi.dir/build.make src/Mod/Fem/Gui/CMakeFiles/FemPythonUi.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem/Gui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem/Gui/CMakeFiles/FemPythonUi.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Fem/Gui/CMakeFiles/FemPythonUi.dir/build.make src/Mod/Fem/Gui/CMakeFiles/FemPythonUi.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/ConstraintCentrif.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/ConstraintCentrif.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/ConstraintCentrif.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/ConstraintCentrif.ui [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/ConstraintSectionPrint.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/ConstraintSectionPrint.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/ConstraintSectionPrint.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/ConstraintSectionPrint.ui [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/ConstraintTie.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/ConstraintTie.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/ConstraintTie.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/ConstraintTie.ui [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/ElectrostaticPotential.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/ElectrostaticPotential.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/ElectrostaticPotential.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/ElectrostaticPotential.ui [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/ElementFluid1D.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/ElementFluid1D.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/ElementFluid1D.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/ElementFluid1D.ui [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/ElementGeometry1D.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/ElementGeometry1D.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/ElementGeometry1D.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/ElementGeometry1D.ui [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/ElementGeometry2D.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/ElementGeometry2D.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/ElementGeometry2D.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/ElementGeometry2D.ui [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/ElementRotation1D.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/ElementRotation1D.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/ElementRotation1D.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/ElementRotation1D.ui [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/FlowVelocity.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/FlowVelocity.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/FlowVelocity.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/FlowVelocity.ui [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/InitialFlowVelocity.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/InitialFlowVelocity.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/InitialFlowVelocity.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/InitialFlowVelocity.ui [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/Material.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/Material.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/Material.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/Material.ui [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/MaterialReinforcement.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/MaterialReinforcement.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/MaterialReinforcement.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/MaterialReinforcement.ui [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/MeshBoundaryLayer.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/MeshBoundaryLayer.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/MeshBoundaryLayer.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/MeshBoundaryLayer.ui [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/MeshGmsh.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/MeshGmsh.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/MeshGmsh.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/MeshGmsh.ui [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/MeshGroup.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/MeshGroup.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/MeshGroup.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/MeshGroup.ui [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/MeshGroupXDMFExport.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/MeshGroupXDMFExport.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/MeshGroupXDMFExport.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/MeshGroupXDMFExport.ui [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/MeshRegion.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/MeshRegion.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/MeshRegion.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/MeshRegion.ui [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/ResultHints.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/ResultHints.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/ResultHints.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/ResultHints.ui [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/ResultShow.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/ResultShow.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/ResultShow.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/ResultShow.ui [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/SolverCalculix.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/SolverCalculix.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Fem/Gui/Resources/ui/SolverCalculix.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Fem/Resources/ui/SolverCalculix.ui gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 21%] Built target FemPythonUi /usr/bin/gmake -f src/Mod/Idf/CMakeFiles/Idf.dir/build.make src/Mod/Idf/CMakeFiles/Idf.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf/CMakeFiles/Idf.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Idf/CMakeFiles/Idf.dir/build.make src/Mod/Idf/CMakeFiles/Idf.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idf.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idf.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idf.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idf.py [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/0603_SMD.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/0603_SMD.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/0603_SMD.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/0603_SMD.stp [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/0805_SMD.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/0805_SMD.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/0805_SMD.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/0805_SMD.stp [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/1206_SMD.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/1206_SMD.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/1206_SMD.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/1206_SMD.stp [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/1210_SMD.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/1210_SMD.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/1210_SMD.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/1210_SMD.stp [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/1812_SMD.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/1812_SMD.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/1812_SMD.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/1812_SMD.stp [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/2225_SMD.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/2225_SMD.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/2225_SMD.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/2225_SMD.stp [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/2512_SMD.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/2512_SMD.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/2512_SMD.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/2512_SMD.stp [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/CAP_50SGV_8_10.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/CAP_50SGV_8_10.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/CAP_50SGV_8_10.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/CAP_50SGV_8_10.stp [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/EPL22_6_16.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/EPL22_6_16.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/EPL22_6_16.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/EPL22_6_16.stp [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/I22_2_5_16.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/I22_2_5_16.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/I22_2_5_16.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/I22_2_5_16.stp [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/I22_2_5_16withEPL22_6_16.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/I22_2_5_16withEPL22_6_16.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/I22_2_5_16withEPL22_6_16.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/I22_2_5_16withEPL22_6_16.stp [ 21%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshElement.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshElement.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshElement.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshElement.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshElement.cpp [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/License.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/License.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/License.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/License.txt [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/MSOP_10.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/MSOP_10.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/MSOP_10.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/MSOP_10.stp [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/RLF_12545.igs to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/RLF_12545.igs cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/RLF_12545.igs /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/RLF_12545.igs [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/RLF_12545.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/RLF_12545.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/RLF_12545.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/RLF_12545.stp [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/RLF_7030.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/RLF_7030.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/RLF_7030.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/RLF_7030.stp [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/SMB_DO_214AA.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/SMB_DO_214AA.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/SMB_DO_214AA.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/SMB_DO_214AA.stp [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/SMC_DO_214AB.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/SMC_DO_214AB.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/SMC_DO_214AB.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/SMC_DO_214AB.stp [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/SOD_323.igs to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/SOD_323.igs cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/SOD_323.igs /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/SOD_323.igs [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/SOD_323.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/SOD_323.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/SOD_323.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/SOD_323.stp [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/SOD_523.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/SOD_523.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/SOD_523.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/SOD_523.stp [ 21%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/SOT23.igs to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/SOT23.igs cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/SOT23.igs /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/SOT23.igs [ 22%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/SOT23.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/SOT23.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/SOT23.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/SOT23.stp [ 22%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/SOT404.igs to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/SOT404.igs cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/SOT404.igs /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/SOT404.igs [ 22%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/SOT404.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/SOT404.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/SOT404.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/SOT404.stp [ 22%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/SOT428_DPAK.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/SOT428_DPAK.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/SOT428_DPAK.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/SOT428_DPAK.stp [ 22%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/SOT_323_3.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/SOT_323_3.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/SOT_323_3.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/SOT_323_3.stp [ 22%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/SOT_96.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/SOT_96.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/SOT_96.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/SOT_96.stp [ 22%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/TCMT1107_4.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/TCMT1107_4.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/TCMT1107_4.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/TCMT1107_4.stp [ 22%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/TSM_103_01_L_DV_A.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/TSM_103_01_L_DV_A.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/TSM_103_01_L_DV_A.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/TSM_103_01_L_DV_A.stp [ 22%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/TSM_104_01_L_DV_A.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/TSM_104_01_L_DV_A.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/TSM_104_01_L_DV_A.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/TSM_104_01_L_DV_A.stp [ 22%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/TSS0P_8.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/TSS0P_8.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/TSS0P_8.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/TSS0P_8.stp [ 22%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/VC0603_SMD.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/VC0603_SMD.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/VC0603_SMD.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/VC0603_SMD.stp [ 22%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/footprints_models.csv to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/footprints_models.csv cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Idflibs/footprints_models.csv /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Idflibs/footprints_models.csv [ 22%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Init.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Init.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Idf && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Idf/Init.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Idf/Init.py gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 22%] Built target Idf /usr/bin/gmake -f src/Mod/Image/CMakeFiles/ImageScripts.dir/build.make src/Mod/Image/CMakeFiles/ImageScripts.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Image /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Image /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Image/CMakeFiles/ImageScripts.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Image/CMakeFiles/ImageScripts.dir/build.make src/Mod/Image/CMakeFiles/ImageScripts.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 22%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Image/ImageTools/_CommandImageScaling.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Image/ImageTools/_CommandImageScaling.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Image && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Image/ImageTools/_CommandImageScaling.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Image/ImageTools/_CommandImageScaling.py [ 22%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Image/ImageTools/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Image/ImageTools/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Image && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Image/ImageTools/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Image/ImageTools/__init__.py [ 22%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Image/Init.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Image/Init.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Image && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Image/Init.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Image/Init.py [ 22%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Image/InitGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Image/InitGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Image && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Image/InitGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Image/InitGui.py gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 22%] Built target ImageScripts /usr/bin/gmake -f src/Mod/Import/CMakeFiles/ImportScripts.dir/build.make src/Mod/Import/CMakeFiles/ImportScripts.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import/CMakeFiles/ImportScripts.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Import/CMakeFiles/ImportScripts.dir/build.make src/Mod/Import/CMakeFiles/ImportScripts.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 22%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/Init.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/Init.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/Init.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/Init.py In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshElement.cpp:29: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_ElemIterator.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:34: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/InitGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/InitGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/InitGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/InitGui.py [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/gzip_utf8.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/gzip_utf8.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/gzip_utf8.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/gzip_utf8.py [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/stepZ.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/stepZ.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/stepZ.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/stepZ.py [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/blocks10.rub to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/blocks10.rub cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/blocks10.rub /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/blocks10.rub [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/blocks112.rub to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/blocks112.rub cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/blocks112.rub /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/blocks112.rub [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/blocks114.rub to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/blocks114.rub cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/blocks114.rub /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/blocks114.rub [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/classes14.rub to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/classes14.rub cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/classes14.rub /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/classes14.rub [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/entities0.rub to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/entities0.rub cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/entities0.rub /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/entities0.rub [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/entities12.rub to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/entities12.rub cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/entities12.rub /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/entities12.rub [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/entities14.rub to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/entities14.rub cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/entities14.rub /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/entities14.rub [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/header0.rub to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/header0.rub cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/header0.rub /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/header0.rub [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/header12.rub to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/header12.rub cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/header12.rub /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/header12.rub [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/header14.rub to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/header14.rub cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/header14.rub /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/header14.rub [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/objects14.rub to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/objects14.rub cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/objects14.rub /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/objects14.rub [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/tables10.rub to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/tables10.rub cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/tables10.rub /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/tables10.rub [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/tables112.rub to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/tables112.rub cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/tables112.rub /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/tables112.rub [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/tables114.rub to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/tables114.rub cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/tables114.rub /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/tables114.rub [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/tables20.rub to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/tables20.rub cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/tables20.rub /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/tables20.rub [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/tables212.rub to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/tables212.rub cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/tables212.rub /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/tables212.rub [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/tables214.rub to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/tables214.rub cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/DxfPlate/tables214.rub /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Import/DxfPlate/tables214.rub gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 23%] Built target ImportScripts /usr/bin/gmake -f src/Mod/Import/App/CMakeFiles/ImportPy.dir/build.make src/Mod/Import/App/CMakeFiles/ImportPy.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import/App /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import/App/CMakeFiles/ImportPy.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Import/App/CMakeFiles/ImportPy.dir/build.make src/Mod/Import/App/CMakeFiles/ImportPy.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/PlmXmlParser.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/PlmXmlParser.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import/App && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/PlmXmlParser.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/PlmXmlParser.py [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/AggregationDataTypes.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/AggregationDataTypes.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import/App && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/AggregationDataTypes.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/AggregationDataTypes.py [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/Aufspannung.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/Aufspannung.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import/App && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/Aufspannung.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/Aufspannung.stp [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/BaseType.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/BaseType.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import/App && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/BaseType.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/BaseType.py [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/Builtin.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/Builtin.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import/App && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/Builtin.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/Builtin.py [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/ConstructedDataTypes.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/ConstructedDataTypes.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import/App && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/ConstructedDataTypes.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/ConstructedDataTypes.py [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/Model.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/Model.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import/App && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/Model.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/Model.py [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/Part21.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/Part21.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import/App && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/Part21.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/Part21.py [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/Product1.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/Product1.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import/App && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/Product1.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/Product1.stp [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/Rules.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/Rules.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import/App && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/Rules.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/Rules.py [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/SCLBase.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/SCLBase.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import/App && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/SCLBase.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/SCLBase.py [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/SimpleDataTypes.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/SimpleDataTypes.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import/App && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/SimpleDataTypes.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/SimpleDataTypes.py [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/SimpleReader.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/SimpleReader.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import/App && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/SimpleReader.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/SimpleReader.py [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/TypeChecker.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/TypeChecker.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import/App && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/TypeChecker.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/TypeChecker.py [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/Utils.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/Utils.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import/App && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/Utils.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/Utils.py [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import/App && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/__init__.py [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/essa_par.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/essa_par.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import/App && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/essa_par.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/essa_par.py [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/gasket1.p21 to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/gasket1.p21 cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import/App && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/SCL/gasket1.p21 /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/SCL/gasket1.p21 [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/automotive_design.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/automotive_design.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import/App && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/automotive_design.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/automotive_design.py [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/ifc2x3.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/ifc2x3.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import/App && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/ifc2x3.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/ifc2x3.py [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/ifc4.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/ifc4.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Import/App && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Import/App/ifc4.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Import/ifc4.py gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 23%] Built target ImportPy /usr/bin/gmake -f src/Mod/Material/CMakeFiles/Material.dir/build.make src/Mod/Material/CMakeFiles/Material.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material/CMakeFiles/Material.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Material/CMakeFiles/Material.dir/build.make src/Mod/Material/CMakeFiles/Material.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/Init.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Material/Init.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/Init.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Material/Init.py [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/InitGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Material/InitGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/InitGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Material/InitGui.py [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/Material.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Material/Material.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/Material.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Material/Material.py [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/MaterialEditor.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Material/MaterialEditor.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/MaterialEditor.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Material/MaterialEditor.py [ 23%] Generating Material_rc.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/lib64/qt5/bin/rcc --generator=python --compress-algo=zlib --compress=1 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/Resources/Material.qrc -o /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material/Material_rc.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && sed /^#\ /d /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material/Material_rc.py >"/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material/Material_rc.py.tmp" && mv /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material/Material_rc.py.tmp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material/Material_rc.py [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/Templatematerial.yml to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Material/Templatematerial.yml cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/Templatematerial.yml /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Material/Templatematerial.yml [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/importFCMat.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Material/importFCMat.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/importFCMat.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Material/importFCMat.py [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/materials-editor.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Material/materials-editor.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/materials-editor.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Material/materials-editor.ui [ 23%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material/Material_rc.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Material/Material_rc.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material/Material_rc.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Material/Material_rc.py gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 23%] Built target Material /usr/bin/gmake -f src/Mod/Material/CMakeFiles/MaterialToolsLib.dir/build.make src/Mod/Material/CMakeFiles/MaterialToolsLib.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material/CMakeFiles/MaterialToolsLib.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Material/CMakeFiles/MaterialToolsLib.dir/build.make src/Mod/Material/CMakeFiles/MaterialToolsLib.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/materialtools/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Material/materialtools/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/materialtools/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Material/materialtools/__init__.py [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/materialtools/cardutils.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Material/materialtools/cardutils.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/materialtools/cardutils.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Material/materialtools/cardutils.py gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 24%] Built target MaterialToolsLib /usr/bin/gmake -f src/Mod/Material/CMakeFiles/MaterialLib.dir/build.make src/Mod/Material/CMakeFiles/MaterialLib.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material/CMakeFiles/MaterialLib.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Material/CMakeFiles/MaterialLib.dir/build.make src/Mod/Material/CMakeFiles/MaterialLib.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/ABS-Generic.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/ABS-Generic.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/ABS-Generic.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/ABS-Generic.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Acrylic-Glass-Generic.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Acrylic-Glass-Generic.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Acrylic-Glass-Generic.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Acrylic-Glass-Generic.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/AlMg3F24.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/AlMg3F24.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/AlMg3F24.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/AlMg3F24.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/AlMgSi1F31.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/AlMgSi1F31.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/AlMgSi1F31.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/AlMgSi1F31.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/AlZn4-5Mg1F35.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/AlZn4-5Mg1F35.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/AlZn4-5Mg1F35.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/AlZn4-5Mg1F35.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Aluminum-6061-T6.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Aluminum-6061-T6.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Aluminum-6061-T6.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Aluminum-6061-T6.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Aluminum-Generic.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Aluminum-Generic.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Aluminum-Generic.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Aluminum-Generic.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/CalculiX-Steel.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/CalculiX-Steel.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/CalculiX-Steel.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/CalculiX-Steel.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Concrete-Generic.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Concrete-Generic.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Concrete-Generic.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Concrete-Generic.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Copper-Generic.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Copper-Generic.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Copper-Generic.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Copper-Generic.FCMat [ 24%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshElementIDFactory.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshElementIDFactory.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshElementIDFactory.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshElementIDFactory.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshElementIDFactory.cpp [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Glass-E-GlassFibre.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Glass-E-GlassFibre.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Glass-E-GlassFibre.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Glass-E-GlassFibre.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Glass-Generic.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Glass-Generic.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Glass-Generic.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Glass-Generic.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Glass-S2-GlassFibre.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Glass-S2-GlassFibre.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Glass-S2-GlassFibre.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Glass-S2-GlassFibre.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Graphite.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Graphite.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Graphite.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Graphite.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Invar-Generic.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Invar-Generic.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Invar-Generic.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Invar-Generic.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/None.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/None.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/None.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/None.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/PA6-Generic.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/PA6-Generic.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/PA6-Generic.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/PA6-Generic.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/PET-Generic.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/PET-Generic.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/PET-Generic.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/PET-Generic.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/PLA-Generic.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/PLA-Generic.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/PLA-Generic.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/PLA-Generic.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/PP-Generic.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/PP-Generic.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/PP-Generic.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/PP-Generic.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/PTFE-Generic.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/PTFE-Generic.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/PTFE-Generic.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/PTFE-Generic.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/PVC-Generic.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/PVC-Generic.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/PVC-Generic.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/PVC-Generic.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Readme.txt to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Readme.txt cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Readme.txt /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Readme.txt [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Reinforcement-FIB-B500.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Reinforcement-FIB-B500.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Reinforcement-FIB-B500.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Reinforcement-FIB-B500.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-15CrNi6.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-15CrNi6.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-15CrNi6.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-15CrNi6.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-17CrNiMo6.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-17CrNiMo6.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-17CrNiMo6.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-17CrNiMo6.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-1C22.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-1C22.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-1C22.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-1C22.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-1C35.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-1C35.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-1C35.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-1C35.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-1C45.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-1C45.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-1C45.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-1C45.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-1C60.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-1C60.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-1C60.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-1C60.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-20NiCrMo2.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-20NiCrMo2.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-20NiCrMo2.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-20NiCrMo2.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-28Mn6.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-28Mn6.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-28Mn6.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-28Mn6.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-2C10.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-2C10.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-2C10.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-2C10.FCMat [ 24%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-30CrNiMo8.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-30CrNiMo8.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-30CrNiMo8.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-30CrNiMo8.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-34CrNiMo6.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-34CrNiMo6.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-34CrNiMo6.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-34CrNiMo6.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-36CrNiMo4.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-36CrNiMo4.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-36CrNiMo4.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-36CrNiMo4.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-36NiCrMo16.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-36NiCrMo16.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-36NiCrMo16.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-36NiCrMo16.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-3C15.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-3C15.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-3C15.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-3C15.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-3C22.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-3C22.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-3C22.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-3C22.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-3C35.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-3C35.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-3C35.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-3C35.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-3V45.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-3V45.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-3V45.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-3V45.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-C10.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-C10.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-C10.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-C10.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-C15.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-C15.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-C15.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-C15.FCMat In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshElementIDFactory.cpp:33: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_algobase.h:65, from /usr/include/c++/13/bits/stl_tree.h:63, from /usr/include/c++/13/set:62, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshIDFactory.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshNodeIDFactory.hxx:30, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElementIDFactory.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshElementIDFactory.cpp:32: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-C22E.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-C22E.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-C22E.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-C22E.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-C25E.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-C25E.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-C25E.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-C25E.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-C30E.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-C30E.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-C30E.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-C30E.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-C40E.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-C40E.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-C40E.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-C40E.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-C50E.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-C50E.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-C50E.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-C50E.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-C55E.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-C55E.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-C55E.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-C55E.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-C60E.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-C60E.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-C60E.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-C60E.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-E295-GC.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-E295-GC.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-E295-GC.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-E295-GC.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-E295.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-E295.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-E295.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-E295.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-E335-GC.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-E335-GC.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-E335-GC.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-E335-GC.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-E335.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-E335.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-E335.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-E335.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-E360-GC.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-E360-GC.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-E360-GC.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-E360-GC.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-E360.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-E360.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-E360.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-E360.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJL-100.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJL-100.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJL-100.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJL-100.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJL-150.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJL-150.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJL-150.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJL-150.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJL-200.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJL-200.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJL-200.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJL-200.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJL-250.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJL-250.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJL-250.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJL-250.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJL-300.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJL-300.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJL-300.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJL-300.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJL-350.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJL-350.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJL-350.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJL-350.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJMB-350-10.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJMB-350-10.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJMB-350-10.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJMB-350-10.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJMB-550-4.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJMB-550-4.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJMB-550-4.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJMB-550-4.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJMB-650-2.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJMB-650-2.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJMB-650-2.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJMB-650-2.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJMW-350-4.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJMW-350-4.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJMW-350-4.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJMW-350-4.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJMW-360-12.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJMW-360-12.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJMW-360-12.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJMW-360-12.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJMW-400-5.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJMW-400-5.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJMW-400-5.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJMW-400-5.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJMW-450-7.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJMW-450-7.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJMW-450-7.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJMW-450-7.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJS-400-15.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJS-400-15.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJS-400-15.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJS-400-15.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJS-500-7.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJS-500-7.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJS-500-7.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJS-500-7.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJS-600-3.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJS-600-3.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJS-600-3.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJS-600-3.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJS-700-2.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJS-700-2.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJS-700-2.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJS-700-2.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJS-800-1.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJS-800-1.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-EN-GJS-800-1.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJS-800-1.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-G16Mn5.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-G16Mn5.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-G16Mn5.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-G16Mn5.FCMat [ 25%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-G200.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-G200.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-G200.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-G200.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-G20Mn5.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-G20Mn5.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-G20Mn5.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-G20Mn5.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-G230.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-G230.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-G230.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-G230.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-G260.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-G260.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-G260.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-G260.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-G300.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-G300.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-G300.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-G300.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-G30Mn5.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-G30Mn5.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-G30Mn5.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-G30Mn5.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-Generic.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-Generic.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-Generic.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-Generic.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S185.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S185.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S185.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S185.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S235JO.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S235JO.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S235JO.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S235JO.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S235JR.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S235JR.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S235JR.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S235JR.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S235JRG1.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S235JRG1.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S235JRG1.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S235JRG1.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S260NC.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S260NC.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S260NC.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S260NC.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S275JO.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S275JO.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S275JO.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S275JO.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S275JR.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S275JR.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S275JR.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S275JR.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S275N.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S275N.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S275N.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S275N.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S335JO.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S335JO.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S335JO.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S335JO.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S335JR.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S335JR.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S335JR.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S335JR.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S335N.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S335N.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S335N.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S335N.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S340MC.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S340MC.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S340MC.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S340MC.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S355J2G3.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S355J2G3.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S355J2G3.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S355J2G3.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S380MC.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S380MC.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S380MC.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S380MC.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S420MC.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S420MC.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S420MC.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S420MC.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S420N.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S420N.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S420N.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S420N.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S460MC.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S460MC.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S460MC.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S460MC.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S460N.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S460N.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S460N.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S460N.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S500MC.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S500MC.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S500MC.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S500MC.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S550MC.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S550MC.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S550MC.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S550MC.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S690MC.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S690MC.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-S690MC.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S690MC.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-St-37-2K.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-St-37-2K.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-St-37-2K.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-St-37-2K.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-St-E-255.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-St-E-255.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-St-E-255.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-St-E-255.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-St-E-315.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-St-E-315.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-St-E-315.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-St-E-315.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-St-E-380.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-St-E-380.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-St-E-380.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-St-E-380.FCMat [ 26%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshFace.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshFace.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshFace.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshFace.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshFace.cpp [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-St-E-460.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-St-E-460.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-St-E-460.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-St-E-460.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-St-E-500.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-St-E-500.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-St-E-500.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-St-E-500.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-X2CrNiMoN17-13-3.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-X2CrNiMoN17-13-3.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-X2CrNiMoN17-13-3.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-X2CrNiMoN17-13-3.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-X2CrNiN24-4.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-X2CrNiN24-4.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-X2CrNiN24-4.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-X2CrNiN24-4.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-X39CrMo17-1.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-X39CrMo17-1.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-X39CrMo17-1.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-X39CrMo17-1.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-X3CrNiMo13-14.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-X3CrNiMo13-14.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-X3CrNiMo13-14.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-X3CrNiMo13-14.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-X5CrNi18-10.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-X5CrNi18-10.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-X5CrNi18-10.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-X5CrNi18-10.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-X5CrNiMo17-12-2.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-X5CrNiMo17-12-2.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-X5CrNiMo17-12-2.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-X5CrNiMo17-12-2.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-X6CrNiTi18-10.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-X6CrNiTi18-10.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Steel-X6CrNiTi18-10.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-X6CrNiTi18-10.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/TEMPLATE.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/TEMPLATE.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/TEMPLATE.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/TEMPLATE.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Wood-Generic.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Wood-Generic.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/StandardMaterial/Wood-Generic.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/StandardMaterial/Wood-Generic.FCMat gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 26%] Built target MaterialLib /usr/bin/gmake -f src/Mod/Material/CMakeFiles/FluidMaterialLib.dir/build.make src/Mod/Material/CMakeFiles/FluidMaterialLib.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material/CMakeFiles/FluidMaterialLib.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Material/CMakeFiles/FluidMaterialLib.dir/build.make src/Mod/Material/CMakeFiles/FluidMaterialLib.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/FluidMaterial/Air.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/FluidMaterial/Air.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/FluidMaterial/Air.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/FluidMaterial/Air.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/FluidMaterial/Argon.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/FluidMaterial/Argon.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/FluidMaterial/Argon.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/FluidMaterial/Argon.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/FluidMaterial/Nitrogen.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/FluidMaterial/Nitrogen.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/FluidMaterial/Nitrogen.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/FluidMaterial/Nitrogen.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/FluidMaterial/None.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/FluidMaterial/None.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/FluidMaterial/None.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/FluidMaterial/None.FCMat [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/FluidMaterial/Readme.md to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/FluidMaterial/Readme.md cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/FluidMaterial/Readme.md /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/FluidMaterial/Readme.md [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/FluidMaterial/Water.FCMat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/FluidMaterial/Water.FCMat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Material && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Material/FluidMaterial/Water.FCMat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Material/FluidMaterial/Water.FCMat gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 26%] Built target FluidMaterialLib /usr/bin/gmake -f src/Mod/Mesh/CMakeFiles/MeshScripts.dir/build.make src/Mod/Mesh/CMakeFiles/MeshScripts.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Mesh /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Mesh /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Mesh/CMakeFiles/MeshScripts.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Mesh/CMakeFiles/MeshScripts.dir/build.make src/Mod/Mesh/CMakeFiles/MeshScripts.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Mesh/BuildRegularGeoms.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Mesh/BuildRegularGeoms.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Mesh && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Mesh/BuildRegularGeoms.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Mesh/BuildRegularGeoms.py [ 26%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Mesh/Init.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Mesh/Init.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Mesh && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Mesh/Init.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Mesh/Init.py [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Mesh/InitGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Mesh/InitGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Mesh && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Mesh/InitGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Mesh/InitGui.py [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Mesh/App/MeshTestsApp.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Mesh/MeshTestsApp.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Mesh && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Mesh/App/MeshTestsApp.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Mesh/MeshTestsApp.py gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 27%] Built target MeshScripts /usr/bin/gmake -f src/Mod/Mesh/CMakeFiles/MeshTestData.dir/build.make src/Mod/Mesh/CMakeFiles/MeshTestData.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Mesh /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Mesh /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Mesh/CMakeFiles/MeshTestData.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Mesh/CMakeFiles/MeshTestData.dir/build.make src/Mod/Mesh/CMakeFiles/MeshTestData.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Mesh/App/TestData/NASTRAN_Test_Delimited_GRID_CQUAD4.bdf to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Mesh/App/TestData/NASTRAN_Test_Delimited_GRID_CQUAD4.bdf cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Mesh && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Mesh/App/TestData/NASTRAN_Test_Delimited_GRID_CQUAD4.bdf /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Mesh/App/TestData/NASTRAN_Test_Delimited_GRID_CQUAD4.bdf [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Mesh/App/TestData/NASTRAN_Test_GRIDSTAR_CQUAD4.bdf to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Mesh/App/TestData/NASTRAN_Test_GRIDSTAR_CQUAD4.bdf cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Mesh && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Mesh/App/TestData/NASTRAN_Test_GRIDSTAR_CQUAD4.bdf /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Mesh/App/TestData/NASTRAN_Test_GRIDSTAR_CQUAD4.bdf [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Mesh/App/TestData/NASTRAN_Test_GRID_CQUAD4.bdf to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Mesh/App/TestData/NASTRAN_Test_GRID_CQUAD4.bdf cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Mesh && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Mesh/App/TestData/NASTRAN_Test_GRID_CQUAD4.bdf /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Mesh/App/TestData/NASTRAN_Test_GRID_CQUAD4.bdf [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Mesh/App/TestData/NASTRAN_Test_GRID_CTRIA3.bdf to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Mesh/App/TestData/NASTRAN_Test_GRID_CTRIA3.bdf cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Mesh && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Mesh/App/TestData/NASTRAN_Test_GRID_CTRIA3.bdf /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Mesh/App/TestData/NASTRAN_Test_GRID_CTRIA3.bdf gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 27%] Built target MeshTestData /usr/bin/gmake -f src/Mod/OpenSCAD/CMakeFiles/OpenSCAD.dir/build.make src/Mod/OpenSCAD/CMakeFiles/OpenSCAD.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD/CMakeFiles/OpenSCAD.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/OpenSCAD/CMakeFiles/OpenSCAD.dir/build.make src/Mod/OpenSCAD/CMakeFiles/OpenSCAD.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/Init.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/Init.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/Init.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/Init.py [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/InitGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/InitGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/InitGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/InitGui.py [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCAD2Dgeom.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCAD2Dgeom.py In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshCell.hxx:23, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshFace.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshFace.cpp:25: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_ElemIterator.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:34: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCAD2Dgeom.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCAD2Dgeom.py [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADCommands.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADCommands.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADCommands.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADCommands.py [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADFeatures.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADFeatures.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADFeatures.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADFeatures.py [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADUtils.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADUtils.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADUtils.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADUtils.py [ 27%] Generating OpenSCAD_rc.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/lib64/qt5/bin/rcc --generator=python --compress-algo=zlib --compress=1 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/Resources/OpenSCAD.qrc -o /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD/OpenSCAD_rc.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && sed /^#\ /d /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD/OpenSCAD_rc.py >"/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD/OpenSCAD_rc.py.tmp" && mv /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD/OpenSCAD_rc.py.tmp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD/OpenSCAD_rc.py [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/TestOpenSCADApp.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/TestOpenSCADApp.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/TestOpenSCADApp.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/TestOpenSCADApp.py [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/TestOpenSCADGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/TestOpenSCADGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/TestOpenSCADGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/TestOpenSCADGui.py [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/colorcodeshapes.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/colorcodeshapes.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/colorcodeshapes.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/colorcodeshapes.py [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/expandplacements.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/expandplacements.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/expandplacements.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/expandplacements.py [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/exportCSG.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/exportCSG.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/exportCSG.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/exportCSG.py [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/importCSG.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/importCSG.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/importCSG.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/importCSG.py [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/replaceobj.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/replaceobj.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/replaceobj.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/replaceobj.py [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/tokrules.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/tokrules.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/tokrules.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/tokrules.py [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/Resources/icons/OpenSCADWorkbench.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/OpenSCAD/Resources/icons/OpenSCADWorkbench.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/Resources/icons/OpenSCADWorkbench.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/OpenSCAD/Resources/icons/OpenSCADWorkbench.svg [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD/OpenSCAD_rc.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCAD_rc.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD/OpenSCAD_rc.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCAD_rc.py gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 27%] Built target OpenSCAD /usr/bin/gmake -f src/Mod/OpenSCAD/CMakeFiles/OpenSCADTests.dir/build.make src/Mod/OpenSCAD/CMakeFiles/OpenSCADTests.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD/CMakeFiles/OpenSCADTests.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/OpenSCAD/CMakeFiles/OpenSCADTests.dir/build.make src/Mod/OpenSCAD/CMakeFiles/OpenSCADTests.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADTest/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADTest/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADTest/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADTest/__init__.py [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADTest/app/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADTest/app/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADTest/app/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADTest/app/__init__.py [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADTest/app/test_importCSG.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADTest/app/test_importCSG.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADTest/app/test_importCSG.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADTest/app/test_importCSG.py [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADTest/data/CSG.csg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADTest/data/CSG.csg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADTest/data/CSG.csg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADTest/data/CSG.csg [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADTest/data/CSG.scad to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADTest/data/CSG.scad cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADTest/data/CSG.scad /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADTest/data/CSG.scad [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADTest/data/Cube.stl to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADTest/data/Cube.stl cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADTest/data/Cube.stl /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADTest/data/Cube.stl [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADTest/data/Square.dxf to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADTest/data/Square.dxf cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADTest/data/Square.dxf /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADTest/data/Square.dxf [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADTest/data/Surface.dat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADTest/data/Surface.dat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADTest/data/Surface.dat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADTest/data/Surface.dat [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADTest/data/Surface.png to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADTest/data/Surface.png cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADTest/data/Surface.png /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADTest/data/Surface.png [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADTest/data/Surface2.dat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADTest/data/Surface2.dat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADTest/data/Surface2.dat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADTest/data/Surface2.dat [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADTest/data/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADTest/data/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADTest/data/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADTest/data/__init__.py [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADTest/gui/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADTest/gui/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADTest/gui/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADTest/gui/__init__.py [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADTest/gui/test_dummy.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADTest/gui/test_dummy.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADTest/gui/test_dummy.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADTest/gui/test_dummy.py [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADTest/test_information.md to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADTest/test_information.md cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/OpenSCAD/OpenSCADTest/test_information.md /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/OpenSCAD/OpenSCADTest/test_information.md gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 27%] Built target OpenSCADTests /usr/bin/gmake -f src/Mod/Part/CMakeFiles/PartScripts.dir/build.make src/Mod/Part/CMakeFiles/PartScripts.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part/CMakeFiles/PartScripts.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Part/CMakeFiles/PartScripts.dir/build.make src/Mod/Part/CMakeFiles/PartScripts.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/AttachmentEditor/Commands.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/AttachmentEditor/Commands.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/AttachmentEditor/Commands.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/AttachmentEditor/Commands.py [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/AttachmentEditor/FrozenClass.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/AttachmentEditor/FrozenClass.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/AttachmentEditor/FrozenClass.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/AttachmentEditor/FrozenClass.py [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/AttachmentEditor/TaskAttachmentEditor.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/AttachmentEditor/TaskAttachmentEditor.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/AttachmentEditor/TaskAttachmentEditor.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/AttachmentEditor/TaskAttachmentEditor.py [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/AttachmentEditor/TaskAttachmentEditor.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/AttachmentEditor/TaskAttachmentEditor.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/AttachmentEditor/TaskAttachmentEditor.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/AttachmentEditor/TaskAttachmentEditor.ui [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/AttachmentEditor/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/AttachmentEditor/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/AttachmentEditor/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/AttachmentEditor/__init__.py [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/BOPTools/GeneralFuseResult.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/BOPTools/GeneralFuseResult.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/BOPTools/GeneralFuseResult.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/BOPTools/GeneralFuseResult.py [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/BOPTools/JoinAPI.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/BOPTools/JoinAPI.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/BOPTools/JoinAPI.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/BOPTools/JoinAPI.py [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/BOPTools/JoinFeatures.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/BOPTools/JoinFeatures.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/BOPTools/JoinFeatures.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/BOPTools/JoinFeatures.py [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/BOPTools/ShapeMerge.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/BOPTools/ShapeMerge.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/BOPTools/ShapeMerge.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/BOPTools/ShapeMerge.py [ 27%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/BOPTools/SplitAPI.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/BOPTools/SplitAPI.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/BOPTools/SplitAPI.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/BOPTools/SplitAPI.py [ 28%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/BOPTools/SplitFeatures.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/BOPTools/SplitFeatures.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/BOPTools/SplitFeatures.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/BOPTools/SplitFeatures.py [ 28%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/BOPTools/Utils.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/BOPTools/Utils.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/BOPTools/Utils.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/BOPTools/Utils.py [ 28%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/BOPTools/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/BOPTools/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/BOPTools/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/BOPTools/__init__.py [ 28%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshGroup.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshGroup.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshGroup.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshGroup.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshGroup.cpp [ 28%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/BasicShapes/CommandShapes.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/BasicShapes/CommandShapes.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/BasicShapes/CommandShapes.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/BasicShapes/CommandShapes.py [ 28%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/BasicShapes/ShapeContent.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/BasicShapes/ShapeContent.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/BasicShapes/ShapeContent.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/BasicShapes/ShapeContent.py [ 28%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/BasicShapes/Shapes.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/BasicShapes/Shapes.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/BasicShapes/Shapes.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/BasicShapes/Shapes.py [ 28%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/BasicShapes/TaskTube.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/BasicShapes/TaskTube.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/BasicShapes/TaskTube.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/BasicShapes/TaskTube.ui [ 28%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/BasicShapes/ViewProviderShapes.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/BasicShapes/ViewProviderShapes.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/BasicShapes/ViewProviderShapes.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/BasicShapes/ViewProviderShapes.py [ 28%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/BasicShapes/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/BasicShapes/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/BasicShapes/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/BasicShapes/__init__.py [ 28%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/CompoundTools/CompoundFilter.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/CompoundTools/CompoundFilter.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/CompoundTools/CompoundFilter.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/CompoundTools/CompoundFilter.py [ 28%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/CompoundTools/Explode.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/CompoundTools/Explode.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/CompoundTools/Explode.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/CompoundTools/Explode.py [ 28%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/CompoundTools/_CommandCompoundFilter.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/CompoundTools/_CommandCompoundFilter.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/CompoundTools/_CommandCompoundFilter.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/CompoundTools/_CommandCompoundFilter.py [ 28%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/CompoundTools/_CommandExplodeCompound.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/CompoundTools/_CommandExplodeCompound.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/CompoundTools/_CommandExplodeCompound.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/CompoundTools/_CommandExplodeCompound.py [ 28%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/CompoundTools/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/CompoundTools/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/CompoundTools/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/CompoundTools/__init__.py [ 28%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/Init.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/Init.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/Init.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/Init.py [ 28%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/InitGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/InitGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/InitGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/InitGui.py [ 28%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/JoinFeatures.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/JoinFeatures.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/JoinFeatures.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/JoinFeatures.py [ 28%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/MakeBottle.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/MakeBottle.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/MakeBottle.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/MakeBottle.py [ 28%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/PartEnums.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/PartEnums.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/PartEnums.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/PartEnums.py [ 28%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/TestPartApp.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/TestPartApp.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/TestPartApp.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/TestPartApp.py [ 28%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/TestPartGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/TestPartGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/TestPartGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/TestPartGui.py [ 28%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/parttests/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/parttests/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/parttests/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/parttests/__init__.py [ 28%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/parttests/part_test_objects.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/parttests/part_test_objects.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/parttests/part_test_objects.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/parttests/part_test_objects.py [ 28%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/parttests/regression_tests.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/parttests/regression_tests.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Part && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Part/parttests/regression_tests.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Part/parttests/regression_tests.py gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 28%] Built target PartScripts /usr/bin/gmake -f src/Mod/PartDesign/CMakeFiles/PartDesignScripts.dir/build.make src/Mod/PartDesign/CMakeFiles/PartDesignScripts.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign/CMakeFiles/PartDesignScripts.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/PartDesign/CMakeFiles/PartDesignScripts.dir/build.make src/Mod/PartDesign/CMakeFiles/PartDesignScripts.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Init.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/Init.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Init.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/Init.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/InitGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/InitGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/InitGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/InitGui.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/InvoluteGearFeature.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/InvoluteGearFeature.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/InvoluteGearFeature.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/InvoluteGearFeature.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/InvoluteGearFeature.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/InvoluteGearFeature.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/InvoluteGearFeature.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/InvoluteGearFeature.ui [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestBoolean.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestBoolean.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestBoolean.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestBoolean.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestChamfer.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestChamfer.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestChamfer.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestChamfer.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestDatum.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestDatum.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestDatum.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestDatum.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestDraft.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestDraft.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestDraft.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestDraft.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestFillet.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestFillet.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestFillet.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestFillet.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestHole.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestHole.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestHole.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestHole.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestInvoluteGear.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestInvoluteGear.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestInvoluteGear.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestInvoluteGear.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestLinearPattern.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestLinearPattern.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestLinearPattern.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestLinearPattern.py In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshNode.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_Mesh.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshGroup.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshGroup.cpp:32: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_ElemIterator.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:34: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestLoft.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestLoft.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestLoft.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestLoft.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestMirrored.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestMirrored.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestMirrored.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestMirrored.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestMultiTransform.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestMultiTransform.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestMultiTransform.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestMultiTransform.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestPad.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestPad.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestPad.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestPad.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestPipe.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestPipe.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestPipe.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestPipe.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestPocket.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestPocket.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestPocket.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestPocket.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestPolarPattern.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestPolarPattern.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestPolarPattern.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestPolarPattern.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestPrimitive.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestPrimitive.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestPrimitive.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestPrimitive.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestRevolve.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestRevolve.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestRevolve.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestRevolve.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestShapeBinder.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestShapeBinder.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestShapeBinder.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestShapeBinder.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestThickness.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestThickness.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/TestThickness.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/TestThickness.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/PartDesignTests/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/PartDesignTests/__init__.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Scripts/DistanceBolt.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/Scripts/DistanceBolt.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Scripts/DistanceBolt.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/Scripts/DistanceBolt.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Scripts/Epitrochoid.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/Scripts/Epitrochoid.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Scripts/Epitrochoid.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/Scripts/Epitrochoid.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Scripts/FilletArc.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/Scripts/FilletArc.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Scripts/FilletArc.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/Scripts/FilletArc.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Scripts/Gear.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/Scripts/Gear.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Scripts/Gear.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/Scripts/Gear.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Scripts/Parallelepiped.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/Scripts/Parallelepiped.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Scripts/Parallelepiped.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/Scripts/Parallelepiped.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Scripts/RadialCopy.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/Scripts/RadialCopy.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Scripts/RadialCopy.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/Scripts/RadialCopy.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Scripts/Spring.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/Scripts/Spring.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Scripts/Spring.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/Scripts/Spring.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Scripts/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/Scripts/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Scripts/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/Scripts/__init__.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/SprocketFeature.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/SprocketFeature.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/SprocketFeature.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/SprocketFeature.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/SprocketFeature.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/SprocketFeature.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/SprocketFeature.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/SprocketFeature.ui [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/TestPartDesignApp.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/TestPartDesignApp.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/TestPartDesignApp.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/TestPartDesignApp.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/TestPartDesignGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/TestPartDesignGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/TestPartDesignGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/TestPartDesignGui.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/__init__.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/fcgear/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/fcgear/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/fcgear/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/fcgear/__init__.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/fcgear/fcgear.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/fcgear/fcgear.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/fcgear/fcgear.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/fcgear/fcgear.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/fcgear/fcgeardialog.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/fcgear/fcgeardialog.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/fcgear/fcgeardialog.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/fcgear/fcgeardialog.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/fcgear/involute.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/fcgear/involute.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/fcgear/involute.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/fcgear/involute.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/fcgear/svggear.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/fcgear/svggear.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/fcgear/svggear.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/fcgear/svggear.py [ 29%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/fcsprocket/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/fcsprocket/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/fcsprocket/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/fcsprocket/__init__.py [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/fcsprocket/fcsprocket.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/fcsprocket/fcsprocket.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/fcsprocket/fcsprocket.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/fcsprocket/fcsprocket.py [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/fcsprocket/fcsprocketdialog.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/fcsprocket/fcsprocketdialog.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/fcsprocket/fcsprocketdialog.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/fcsprocket/fcsprocketdialog.py [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/fcsprocket/sprocket.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/fcsprocket/sprocket.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/fcsprocket/sprocket.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/fcsprocket/sprocket.py gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 30%] Built target PartDesignScripts /usr/bin/gmake -f src/Mod/PartDesign/CMakeFiles/PartDesignHole.dir/build.make src/Mod/PartDesign/CMakeFiles/PartDesignHole.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign/CMakeFiles/PartDesignHole.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/PartDesign/CMakeFiles/PartDesignHole.dir/build.make src/Mod/PartDesign/CMakeFiles/PartDesignHole.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Resources/Hole/din7984.json to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/PartDesign/Resources/Hole/din7984.json cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Resources/Hole/din7984.json /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/PartDesign/Resources/Hole/din7984.json [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Resources/Hole/iso10642-fine.json to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/PartDesign/Resources/Hole/iso10642-fine.json cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Resources/Hole/iso10642-fine.json /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/PartDesign/Resources/Hole/iso10642-fine.json [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Resources/Hole/iso10642.json to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/PartDesign/Resources/Hole/iso10642.json cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Resources/Hole/iso10642.json /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/PartDesign/Resources/Hole/iso10642.json [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Resources/Hole/iso12474-fine.json to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/PartDesign/Resources/Hole/iso12474-fine.json cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Resources/Hole/iso12474-fine.json /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/PartDesign/Resources/Hole/iso12474-fine.json [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Resources/Hole/iso14583.json to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/PartDesign/Resources/Hole/iso14583.json cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Resources/Hole/iso14583.json /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/PartDesign/Resources/Hole/iso14583.json [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Resources/Hole/iso14583part.json to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/PartDesign/Resources/Hole/iso14583part.json cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Resources/Hole/iso14583part.json /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/PartDesign/Resources/Hole/iso14583part.json [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Resources/Hole/iso2009.json to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/PartDesign/Resources/Hole/iso2009.json cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Resources/Hole/iso2009.json /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/PartDesign/Resources/Hole/iso2009.json [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Resources/Hole/iso4762-fine.json to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/PartDesign/Resources/Hole/iso4762-fine.json cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Resources/Hole/iso4762-fine.json /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/PartDesign/Resources/Hole/iso4762-fine.json [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Resources/Hole/iso4762.json to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/PartDesign/Resources/Hole/iso4762.json cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Resources/Hole/iso4762.json /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/PartDesign/Resources/Hole/iso4762.json [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Resources/Hole/iso4762_7089.json to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/PartDesign/Resources/Hole/iso4762_7089.json cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Resources/Hole/iso4762_7089.json /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/PartDesign/Resources/Hole/iso4762_7089.json [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Resources/Hole/iso7046.json to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/PartDesign/Resources/Hole/iso7046.json cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/Resources/Hole/iso7046.json /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/PartDesign/Resources/Hole/iso7046.json gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 30%] Built target PartDesignHole /usr/bin/gmake -f src/Mod/PartDesign/CMakeFiles/WizardShaft.dir/build.make src/Mod/PartDesign/CMakeFiles/WizardShaft.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign/CMakeFiles/WizardShaft.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/PartDesign/CMakeFiles/WizardShaft.dir/build.make src/Mod/PartDesign/CMakeFiles/WizardShaft.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/WizardShaft/SegmentFunction.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/WizardShaft/SegmentFunction.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/WizardShaft/SegmentFunction.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/WizardShaft/SegmentFunction.py [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/WizardShaft/Shaft.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/WizardShaft/Shaft.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/WizardShaft/Shaft.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/WizardShaft/Shaft.py [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/WizardShaft/ShaftDiagram.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/WizardShaft/ShaftDiagram.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/WizardShaft/ShaftDiagram.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/WizardShaft/ShaftDiagram.py [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/WizardShaft/ShaftFeature.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/WizardShaft/ShaftFeature.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/WizardShaft/ShaftFeature.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/WizardShaft/ShaftFeature.py [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/WizardShaft/WizardShaft.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/WizardShaft/WizardShaft.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/WizardShaft/WizardShaft.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/WizardShaft/WizardShaft.py [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/WizardShaft/WizardShaft.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/WizardShaft/WizardShaft.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/WizardShaft/WizardShaft.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/WizardShaft/WizardShaft.svg [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/WizardShaft/WizardShaftTable.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/WizardShaft/WizardShaftTable.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/WizardShaft/WizardShaftTable.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/WizardShaft/WizardShaftTable.py [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/WizardShaft/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/WizardShaft/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/PartDesign && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/PartDesign/WizardShaft/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/PartDesign/WizardShaft/__init__.py gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 30%] Built target WizardShaft /usr/bin/gmake -f src/Mod/Path/CMakeFiles/PathScripts.dir/build.make src/Mod/Path/CMakeFiles/PathScripts.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/CMakeFiles/PathScripts.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Path/CMakeFiles/PathScripts.dir/build.make src/Mod/Path/CMakeFiles/PathScripts.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Data/Threads/imperial-external-2A.csv to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Data/Threads/imperial-external-2A.csv cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Data/Threads/imperial-external-2A.csv /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Data/Threads/imperial-external-2A.csv [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Data/Threads/imperial-external-3A.csv to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Data/Threads/imperial-external-3A.csv cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Data/Threads/imperial-external-3A.csv /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Data/Threads/imperial-external-3A.csv [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Data/Threads/imperial-internal-2B.csv to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Data/Threads/imperial-internal-2B.csv cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Data/Threads/imperial-internal-2B.csv /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Data/Threads/imperial-internal-2B.csv [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Data/Threads/imperial-internal-3B.csv to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Data/Threads/imperial-internal-3B.csv cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Data/Threads/imperial-internal-3B.csv /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Data/Threads/imperial-internal-3B.csv [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Data/Threads/metric-external-4G6G.csv to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Data/Threads/metric-external-4G6G.csv cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Data/Threads/metric-external-4G6G.csv /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Data/Threads/metric-external-4G6G.csv [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Data/Threads/metric-external-6G.csv to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Data/Threads/metric-external-6G.csv cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Data/Threads/metric-external-6G.csv /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Data/Threads/metric-external-6G.csv [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Data/Threads/metric-internal-6H.csv to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Data/Threads/metric-internal-6H.csv cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Data/Threads/metric-internal-6H.csv /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Data/Threads/metric-internal-6H.csv [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Generators/drill_generator.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Generators/drill_generator.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Generators/drill_generator.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Generators/drill_generator.py [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Generators/helix_generator.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Generators/helix_generator.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Generators/helix_generator.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Generators/helix_generator.py [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Generators/rotation_generator.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Generators/rotation_generator.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Generators/rotation_generator.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Generators/rotation_generator.py [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Generators/threadmilling_generator.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Generators/threadmilling_generator.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Generators/threadmilling_generator.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Generators/threadmilling_generator.py [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Generators/toolchange_generator.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Generators/toolchange_generator.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Generators/toolchange_generator.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Generators/toolchange_generator.py [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Images/Ops/chamfer.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Images/Ops/chamfer.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Images/Ops/chamfer.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Images/Ops/chamfer.svg [ 30%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshIDFactory.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshIDFactory.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshIDFactory.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshIDFactory.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshIDFactory.cpp [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Images/Tools/drill.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Images/Tools/drill.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Images/Tools/drill.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Images/Tools/drill.svg [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Images/Tools/endmill.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Images/Tools/endmill.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Images/Tools/endmill.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Images/Tools/endmill.svg [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Images/Tools/v-bit.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Images/Tools/v-bit.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Images/Tools/v-bit.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Images/Tools/v-bit.svg [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathPythonGui/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathPythonGui/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathPythonGui/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathPythonGui/__init__.py [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathPythonGui/simple_edit_panel.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathPythonGui/simple_edit_panel.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathPythonGui/simple_edit_panel.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathPythonGui/simple_edit_panel.py [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathAdaptive.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathAdaptive.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathAdaptive.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathAdaptive.py [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathAdaptiveGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathAdaptiveGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathAdaptiveGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathAdaptiveGui.py [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathAreaOp.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathAreaOp.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathAreaOp.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathAreaOp.py [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathArray.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathArray.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathArray.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathArray.py [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathCircularHoleBase.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathCircularHoleBase.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathCircularHoleBase.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathCircularHoleBase.py [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathCircularHoleBaseGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathCircularHoleBaseGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathCircularHoleBaseGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathCircularHoleBaseGui.py [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathComment.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathComment.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathComment.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathComment.py [ 30%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathCopy.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathCopy.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathCopy.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathCopy.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathCustom.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathCustom.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathCustom.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathCustom.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathCustomGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathCustomGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathCustomGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathCustomGui.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDeburr.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDeburr.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDeburr.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDeburr.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDeburrGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDeburrGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDeburrGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDeburrGui.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDressup.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDressup.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDressup.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDressup.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDressupAxisMap.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDressupAxisMap.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDressupAxisMap.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDressupAxisMap.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDressupDogbone.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDressupDogbone.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDressupDogbone.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDressupDogbone.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDressupDragknife.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDressupDragknife.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDressupDragknife.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDressupDragknife.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDressupHoldingTags.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDressupHoldingTags.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDressupHoldingTags.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDressupHoldingTags.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDressupLeadInOut.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDressupLeadInOut.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDressupLeadInOut.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDressupLeadInOut.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDressupPathBoundary.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDressupPathBoundary.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDressupPathBoundary.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDressupPathBoundary.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDressupPathBoundaryGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDressupPathBoundaryGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDressupPathBoundaryGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDressupPathBoundaryGui.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDressupRampEntry.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDressupRampEntry.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDressupRampEntry.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDressupRampEntry.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDressupTag.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDressupTag.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDressupTag.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDressupTag.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDressupTagGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDressupTagGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDressupTagGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDressupTagGui.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDressupTagPreferences.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDressupTagPreferences.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDressupTagPreferences.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDressupTagPreferences.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDressupZCorrect.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDressupZCorrect.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDressupZCorrect.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDressupZCorrect.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDrilling.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDrilling.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDrilling.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDrilling.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDrillingGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDrillingGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathDrillingGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathDrillingGui.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathEngrave.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathEngrave.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathEngrave.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathEngrave.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathEngraveBase.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathEngraveBase.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathEngraveBase.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathEngraveBase.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathEngraveGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathEngraveGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathEngraveGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathEngraveGui.py In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshNode.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_Mesh.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshIDFactory.cpp:29: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_algobase.h:65, from /usr/include/c++/13/bits/stl_tree.h:63, from /usr/include/c++/13/set:62, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshIDFactory.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshIDFactory.cpp:28: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathFeatureExtensions.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathFeatureExtensions.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathFeatureExtensions.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathFeatureExtensions.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathFeatureExtensionsGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathFeatureExtensionsGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathFeatureExtensionsGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathFeatureExtensionsGui.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathFixture.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathFixture.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathFixture.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathFixture.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathGeom.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathGeom.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathGeom.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathGeom.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathGetPoint.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathGetPoint.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathGetPoint.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathGetPoint.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathGui.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathGuiInit.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathGuiInit.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathGuiInit.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathGuiInit.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathHelix.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathHelix.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathHelix.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathHelix.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathHelixGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathHelixGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathHelixGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathHelixGui.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathHop.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathHop.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathHop.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathHop.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathIconViewProvider.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathIconViewProvider.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathIconViewProvider.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathIconViewProvider.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathInspect.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathInspect.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathInspect.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathInspect.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathJob.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathJob.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathJob.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathJob.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathJobCmd.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathJobCmd.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathJobCmd.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathJobCmd.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathJobDlg.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathJobDlg.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathJobDlg.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathJobDlg.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathJobGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathJobGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathJobGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathJobGui.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathLog.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathLog.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathLog.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathLog.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathMillFace.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathMillFace.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathMillFace.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathMillFace.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathMillFaceGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathMillFaceGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathMillFaceGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathMillFaceGui.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathOp.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathOp.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathOp.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathOp.py [ 31%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathOpGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathOpGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathOpGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathOpGui.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathOpTools.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathOpTools.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathOpTools.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathOpTools.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathPocket.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathPocket.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathPocket.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathPocket.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathPocketBase.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathPocketBase.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathPocketBase.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathPocketBase.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathPocketBaseGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathPocketBaseGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathPocketBaseGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathPocketBaseGui.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathPocketGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathPocketGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathPocketGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathPocketGui.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathPocketShape.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathPocketShape.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathPocketShape.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathPocketShape.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathPocketShapeGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathPocketShapeGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathPocketShapeGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathPocketShapeGui.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathPost.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathPost.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathPost.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathPost.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathPostProcessor.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathPostProcessor.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathPostProcessor.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathPostProcessor.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathPreferences.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathPreferences.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathPreferences.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathPreferences.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathPreferencesAdvanced.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathPreferencesAdvanced.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathPreferencesAdvanced.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathPreferencesAdvanced.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathPreferencesPathDressup.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathPreferencesPathDressup.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathPreferencesPathDressup.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathPreferencesPathDressup.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathPreferencesPathJob.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathPreferencesPathJob.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathPreferencesPathJob.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathPreferencesPathJob.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathProbe.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathProbe.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathProbe.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathProbe.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathProbeGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathProbeGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathProbeGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathProbeGui.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathProfile.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathProfile.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathProfile.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathProfile.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathProfileContour.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathProfileContour.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathProfileContour.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathProfileContour.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathProfileContourGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathProfileContourGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathProfileContourGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathProfileContourGui.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathProfileEdges.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathProfileEdges.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathProfileEdges.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathProfileEdges.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathProfileEdgesGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathProfileEdgesGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathProfileEdgesGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathProfileEdgesGui.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathProfileFaces.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathProfileFaces.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathProfileFaces.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathProfileFaces.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathProfileFacesGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathProfileFacesGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathProfileFacesGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathProfileFacesGui.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathProfileGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathProfileGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathProfileGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathProfileGui.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathProperty.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathProperty.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathProperty.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathProperty.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathPropertyBag.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathPropertyBag.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathPropertyBag.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathPropertyBag.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathPropertyBagGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathPropertyBagGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathPropertyBagGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathPropertyBagGui.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathPropertyEditor.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathPropertyEditor.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathPropertyEditor.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathPropertyEditor.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathSanity.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathSanity.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathSanity.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathSanity.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathSelection.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathSelection.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathSelection.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathSelection.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathSetupSheet.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathSetupSheet.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathSetupSheet.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathSetupSheet.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathSetupSheetGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathSetupSheetGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathSetupSheetGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathSetupSheetGui.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathSetupSheetOpPrototype.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathSetupSheetOpPrototype.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathSetupSheetOpPrototype.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathSetupSheetOpPrototype.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathSetupSheetOpPrototypeGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathSetupSheetOpPrototypeGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathSetupSheetOpPrototypeGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathSetupSheetOpPrototypeGui.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathSimpleCopy.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathSimpleCopy.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathSimpleCopy.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathSimpleCopy.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathSimulatorGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathSimulatorGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathSimulatorGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathSimulatorGui.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathSlot.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathSlot.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathSlot.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathSlot.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathSlotGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathSlotGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathSlotGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathSlotGui.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathStock.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathStock.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathStock.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathStock.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathStop.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathStop.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathStop.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathStop.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathSurface.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathSurface.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathSurface.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathSurface.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathSurfaceGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathSurfaceGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathSurfaceGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathSurfaceGui.py [ 32%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathSurfaceSupport.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathSurfaceSupport.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathSurfaceSupport.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathSurfaceSupport.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathThreadMilling.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathThreadMilling.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathThreadMilling.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathThreadMilling.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathThreadMillingGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathThreadMillingGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathThreadMillingGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathThreadMillingGui.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathToolBit.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathToolBit.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathToolBit.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathToolBit.py [ 33%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshNode.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshNode.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshNode.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshNode.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshNode.cpp [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathToolBitCmd.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathToolBitCmd.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathToolBitCmd.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathToolBitCmd.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathToolBitEdit.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathToolBitEdit.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathToolBitEdit.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathToolBitEdit.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathToolBitGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathToolBitGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathToolBitGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathToolBitGui.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathToolBitLibraryCmd.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathToolBitLibraryCmd.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathToolBitLibraryCmd.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathToolBitLibraryCmd.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathToolBitLibraryGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathToolBitLibraryGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathToolBitLibraryGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathToolBitLibraryGui.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathToolController.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathToolController.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathToolController.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathToolController.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathToolControllerGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathToolControllerGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathToolControllerGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathToolControllerGui.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathToolEdit.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathToolEdit.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathToolEdit.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathToolEdit.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathToolLibraryEditor.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathToolLibraryEditor.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathToolLibraryEditor.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathToolLibraryEditor.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathToolLibraryManager.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathToolLibraryManager.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathToolLibraryManager.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathToolLibraryManager.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathUtil.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathUtil.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathUtil.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathUtil.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathUtils.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathUtils.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathUtils.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathUtils.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathUtilsGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathUtilsGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathUtilsGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathUtilsGui.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathVcarve.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathVcarve.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathVcarve.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathVcarve.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathVcarveGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathVcarveGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathVcarveGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathVcarveGui.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathWaterline.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathWaterline.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathWaterline.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathWaterline.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathWaterlineGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathWaterlineGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PathWaterlineGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PathWaterlineGui.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PostUtils.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PostUtils.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/PostUtils.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/PostUtils.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/__init__.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/drillableLib.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/drillableLib.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/drillableLib.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/drillableLib.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/KineticNCBeamicon2_post.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/KineticNCBeamicon2_post.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/KineticNCBeamicon2_post.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/KineticNCBeamicon2_post.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/__init__.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/centroid_post.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/centroid_post.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/centroid_post.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/centroid_post.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/comparams_post.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/comparams_post.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/comparams_post.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/comparams_post.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/dxf_post.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/dxf_post.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/dxf_post.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/dxf_post.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/dynapath_post.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/dynapath_post.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/dynapath_post.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/dynapath_post.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/example_pre.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/example_pre.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/example_pre.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/example_pre.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/fablin_post.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/fablin_post.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/fablin_post.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/fablin_post.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/fanuc_post.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/fanuc_post.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/fanuc_post.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/fanuc_post.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/gcode_pre.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/gcode_pre.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/gcode_pre.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/gcode_pre.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/grbl_post.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/grbl_post.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/grbl_post.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/grbl_post.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/heidenhain_post.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/heidenhain_post.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/heidenhain_post.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/heidenhain_post.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/jtech_post.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/jtech_post.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/jtech_post.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/jtech_post.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/linuxcnc_post.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/linuxcnc_post.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/linuxcnc_post.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/linuxcnc_post.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/mach3_mach4_post.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/mach3_mach4_post.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/mach3_mach4_post.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/mach3_mach4_post.py [ 33%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/marlin_post.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/marlin_post.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/marlin_post.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/marlin_post.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/nccad_post.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/nccad_post.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/nccad_post.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/nccad_post.py In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshNode.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshNode.cpp:29: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_ElemIterator.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:34: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/opensbp_post.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/opensbp_post.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/opensbp_post.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/opensbp_post.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/opensbp_pre.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/opensbp_pre.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/opensbp_pre.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/opensbp_pre.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/philips_post.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/philips_post.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/philips_post.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/philips_post.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/rml_post.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/rml_post.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/rml_post.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/rml_post.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/rrf_post.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/rrf_post.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/rrf_post.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/rrf_post.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/slic3r_pre.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/slic3r_pre.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/slic3r_pre.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/slic3r_pre.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/smoothie_post.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/smoothie_post.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/smoothie_post.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/smoothie_post.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/uccnc_post.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/uccnc_post.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathScripts/post/uccnc_post.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathScripts/post/uccnc_post.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Bit/45degree_chamfer.fctb to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Bit/45degree_chamfer.fctb cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Bit/45degree_chamfer.fctb /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Bit/45degree_chamfer.fctb [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Bit/5mm-thread-cutter.fctb to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Bit/5mm-thread-cutter.fctb cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Bit/5mm-thread-cutter.fctb /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Bit/5mm-thread-cutter.fctb [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Bit/5mm_Drill.fctb to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Bit/5mm_Drill.fctb cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Bit/5mm_Drill.fctb /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Bit/5mm_Drill.fctb [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Bit/5mm_Endmill.fctb to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Bit/5mm_Endmill.fctb cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Bit/5mm_Endmill.fctb /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Bit/5mm_Endmill.fctb [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Bit/60degree_Vbit.fctb to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Bit/60degree_Vbit.fctb cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Bit/60degree_Vbit.fctb /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Bit/60degree_Vbit.fctb [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Bit/6mm_Ball_End.fctb to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Bit/6mm_Ball_End.fctb cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Bit/6mm_Ball_End.fctb /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Bit/6mm_Ball_End.fctb [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Bit/6mm_Bullnose.fctb to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Bit/6mm_Bullnose.fctb cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Bit/6mm_Bullnose.fctb /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Bit/6mm_Bullnose.fctb [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Bit/probe.fctb to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Bit/probe.fctb cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Bit/probe.fctb /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Bit/probe.fctb [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Bit/slittingsaw.fctb to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Bit/slittingsaw.fctb cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Bit/slittingsaw.fctb /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Bit/slittingsaw.fctb [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Library/Default.fctl to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Library/Default.fctl cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Library/Default.fctl /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Library/Default.fctl [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/README.md to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/README.md cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/README.md /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/README.md [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Shape/ballend.fcstd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Shape/ballend.fcstd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Shape/ballend.fcstd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Shape/ballend.fcstd [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Shape/bullnose.fcstd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Shape/bullnose.fcstd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Shape/bullnose.fcstd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Shape/bullnose.fcstd [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Shape/chamfer.fcstd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Shape/chamfer.fcstd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Shape/chamfer.fcstd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Shape/chamfer.fcstd [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Shape/drill.fcstd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Shape/drill.fcstd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Shape/drill.fcstd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Shape/drill.fcstd [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Shape/endmill.fcstd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Shape/endmill.fcstd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Shape/endmill.fcstd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Shape/endmill.fcstd [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Shape/probe.fcstd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Shape/probe.fcstd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Shape/probe.fcstd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Shape/probe.fcstd [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Shape/slittingsaw.fcstd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Shape/slittingsaw.fcstd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Shape/slittingsaw.fcstd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Shape/slittingsaw.fcstd [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Shape/thread-mill.fcstd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Shape/thread-mill.fcstd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Shape/thread-mill.fcstd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Shape/thread-mill.fcstd [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Shape/v-bit.fcstd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Shape/v-bit.fcstd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Tools/Shape/v-bit.fcstd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Tools/Shape/v-bit.fcstd gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 34%] Built target PathScripts /usr/bin/gmake -f src/Mod/Path/CMakeFiles/PathTests.dir/build.make src/Mod/Path/CMakeFiles/PathTests.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/CMakeFiles/PathTests.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Path/CMakeFiles/PathTests.dir/build.make src/Mod/Path/CMakeFiles/PathTests.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Init.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Init.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/Init.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/Init.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/InitGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/InitGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/InitGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/InitGui.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathCommands.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathCommands.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathCommands.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathCommands.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathFeedRate.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathFeedRate.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathFeedRate.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathFeedRate.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathMachineState.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathMachineState.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathMachineState.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathMachineState.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/Drilling_1.FCStd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/Drilling_1.FCStd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/Drilling_1.FCStd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/Drilling_1.FCStd [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/PathTestUtils.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/PathTestUtils.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/PathTestUtils.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/PathTestUtils.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathAdaptive.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathAdaptive.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathAdaptive.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathAdaptive.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathCore.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathCore.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathCore.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathCore.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathDeburr.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathDeburr.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathDeburr.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathDeburr.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathDepthParams.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathDepthParams.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathDepthParams.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathDepthParams.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathDressupDogbone.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathDressupDogbone.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathDressupDogbone.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathDressupDogbone.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathDressupHoldingTags.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathDressupHoldingTags.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathDressupHoldingTags.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathDressupHoldingTags.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathDrillGenerator.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathDrillGenerator.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathDrillGenerator.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathDrillGenerator.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathDrillable.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathDrillable.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathDrillable.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathDrillable.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathGeom.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathGeom.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathGeom.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathGeom.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathHelix.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathHelix.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathHelix.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathHelix.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathHelixGenerator.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathHelixGenerator.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathHelixGenerator.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathHelixGenerator.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathHelpers.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathHelpers.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathHelpers.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathHelpers.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathLog.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathLog.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathLog.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathLog.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathOpTools.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathOpTools.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathOpTools.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathOpTools.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathPost.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathPost.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathPost.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathPost.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathPreferences.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathPreferences.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathPreferences.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathPreferences.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathPropertyBag.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathPropertyBag.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathPropertyBag.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathPropertyBag.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathRotationGenerator.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathRotationGenerator.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathRotationGenerator.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathRotationGenerator.py [ 34%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathSetupSheet.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathSetupSheet.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathSetupSheet.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathSetupSheet.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathStock.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathStock.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathStock.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathStock.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathThreadMilling.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathThreadMilling.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathThreadMilling.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathThreadMilling.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathThreadMillingGenerator.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathThreadMillingGenerator.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathThreadMillingGenerator.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathThreadMillingGenerator.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathTool.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathTool.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathTool.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathTool.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathToolBit.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathToolBit.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathToolBit.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathToolBit.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathToolChangeGenerator.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathToolChangeGenerator.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathToolChangeGenerator.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathToolChangeGenerator.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathToolController.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathToolController.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathToolController.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathToolController.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathTooltable.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathTooltable.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathTooltable.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathTooltable.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathUtil.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathUtil.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathUtil.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathUtil.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathVcarve.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathVcarve.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathVcarve.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathVcarve.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathVoronoi.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathVoronoi.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/TestPathVoronoi.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/TestPathVoronoi.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/Tools/Bit/test-path-tool-bit-bit-00.fctb to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/Tools/Bit/test-path-tool-bit-bit-00.fctb cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/Tools/Bit/test-path-tool-bit-bit-00.fctb /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/Tools/Bit/test-path-tool-bit-bit-00.fctb [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/Tools/Library/test-path-tool-bit-library-00.fctl to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/Tools/Library/test-path-tool-bit-library-00.fctl cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/Tools/Library/test-path-tool-bit-library-00.fctl /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/Tools/Library/test-path-tool-bit-library-00.fctl [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/Tools/Shape/test-path-tool-bit-shape-00.fcstd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/Tools/Shape/test-path-tool-bit-shape-00.fcstd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/Tools/Shape/test-path-tool-bit-shape-00.fcstd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/Tools/Shape/test-path-tool-bit-shape-00.fcstd [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/__init__.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/boxtest.fcstd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/boxtest.fcstd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/boxtest.fcstd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/boxtest.fcstd [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/test_adaptive.fcstd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/test_adaptive.fcstd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/test_adaptive.fcstd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/test_adaptive.fcstd [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/test_centroid_00.ngc to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/test_centroid_00.ngc cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/test_centroid_00.ngc /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/test_centroid_00.ngc [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/test_geomop.fcstd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/test_geomop.fcstd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/test_geomop.fcstd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/test_geomop.fcstd [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/test_holes00.fcstd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/test_holes00.fcstd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/test_holes00.fcstd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/test_holes00.fcstd [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/test_linuxcnc_00.ngc to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/test_linuxcnc_00.ngc cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/PathTests/test_linuxcnc_00.ngc /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/PathTests/test_linuxcnc_00.ngc [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/TestPathApp.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/TestPathApp.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/TestPathApp.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Path/TestPathApp.py gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 35%] Built target PathTests /usr/bin/gmake -f src/Mod/Path/libarea/CMakeFiles/area-native_autogen.dir/build.make src/Mod/Path/libarea/CMakeFiles/area-native_autogen.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea/CMakeFiles/area-native_autogen.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Path/libarea/CMakeFiles/area-native_autogen.dir/build.make src/Mod/Path/libarea/CMakeFiles/area-native_autogen.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 35%] Automatic MOC for target area-native cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea && /usr/bin/cmake -E cmake_autogen /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea/CMakeFiles/area-native_autogen.dir/AutogenInfo.json "" AutoGen: Refreshing parse cache because it doesn't exist. AutoMoc: Generating "SRC:/redhat-linux-build/src/Mod/Path/libarea/area-native_autogen/moc_predefs.h", because it doesn't exist. /usr/bin/g++ -dM -E -c /usr/share/cmake/Modules/CMakeCXXCompilerABI.cpp -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -Darea_native_EXPORTS -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/usr/include/python3.11 -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea -I/usr/include -I/usr/include/c++/13 -I/usr/include/c++/13/x86_64-redhat-linux -I/usr/include/c++/13/backward -I/usr/lib/gcc/x86_64-redhat-linux/13/include -I/usr/local/include AutoGen: Parsing "SRC:/src/Mod/Path/libarea/Adaptive.hpp" AutoGen: Parsing "SRC:/src/Mod/Path/libarea/Arc.h" AutoGen: Parsing "SRC:/src/Mod/Path/libarea/Area.h" AutoGen: Parsing "SRC:/src/Mod/Path/libarea/AreaDxf.h" AutoGen: Parsing "SRC:/src/Mod/Path/libarea/AreaOrderer.h" AutoGen: Parsing "SRC:/src/Mod/Path/libarea/Circle.h" AutoGen: Parsing "SRC:/src/Mod/Path/libarea/Curve.h" AutoGen: Parsing "SRC:/src/Mod/Path/libarea/clipper.hpp" AutoGen: Parsing "SRC:/src/Mod/Path/libarea/dxf.h" AutoGen: Parsing "SRC:/src/Mod/Path/libarea/Adaptive.cpp" AutoGen: Parsing "SRC:/src/Mod/Path/libarea/Arc.cpp" AutoGen: Parsing "SRC:/src/Mod/Path/libarea/Area.cpp" AutoGen: Parsing "SRC:/src/Mod/Path/libarea/AreaClipper.cpp" AutoGen: Parsing "SRC:/src/Mod/Path/libarea/AreaDxf.cpp" AutoGen: Parsing "SRC:/src/Mod/Path/libarea/AreaOrderer.cpp" AutoGen: Parsing "SRC:/src/Mod/Path/libarea/AreaPocket.cpp" AutoGen: Parsing "SRC:/src/Mod/Path/libarea/Circle.cpp" AutoGen: Parsing "SRC:/src/Mod/Path/libarea/Curve.cpp" AutoGen: Parsing "SRC:/src/Mod/Path/libarea/clipper.cpp" AutoGen: Parsing "SRC:/src/Mod/Path/libarea/dxf.cpp" AutoGen: Parsing "SRC:/src/Mod/Path/libarea/kurve/Construction.cpp" AutoGen: Parsing "SRC:/src/Mod/Path/libarea/kurve/Finite.cpp" AutoGen: Parsing "SRC:/src/Mod/Path/libarea/kurve/Matrix.cpp" AutoGen: Parsing "SRC:/src/Mod/Path/libarea/kurve/kurve.cpp" AutoGen: Parsing "SRC:/src/Mod/Path/libarea/kurve/offset.cpp" AutoMoc: Generating MOC compilation "SRC:/redhat-linux-build/src/Mod/Path/libarea/area-native_autogen/mocs_compilation.cpp" AutoGen: Writing the parse cache file "SRC:/redhat-linux-build/src/Mod/Path/libarea/CMakeFiles/area-native_autogen.dir/ParseCache.txt" AutoGen: Writing the settings file "SRC:/redhat-linux-build/src/Mod/Path/libarea/CMakeFiles/area-native_autogen.dir/AutogenUsed.txt" gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 35%] Built target area-native_autogen /usr/bin/gmake -f src/Mod/Plot/CMakeFiles/Plot.dir/build.make src/Mod/Plot/CMakeFiles/Plot.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Plot /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Plot /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Plot/CMakeFiles/Plot.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Plot/CMakeFiles/Plot.dir/build.make src/Mod/Plot/CMakeFiles/Plot.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Plot/Plot.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Plot/Plot.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Plot && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Plot/Plot.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Plot/Plot.py gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 35%] Built target Plot /usr/bin/gmake -f src/Mod/Raytracing/CMakeFiles/RaytracingScripts.dir/build.make src/Mod/Raytracing/CMakeFiles/RaytracingScripts.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Raytracing /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Raytracing /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Raytracing/CMakeFiles/RaytracingScripts.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Raytracing/CMakeFiles/RaytracingScripts.dir/build.make src/Mod/Raytracing/CMakeFiles/RaytracingScripts.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Raytracing/Init.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Raytracing/Init.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Raytracing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Raytracing/Init.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Raytracing/Init.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Raytracing/InitGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Raytracing/InitGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Raytracing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Raytracing/InitGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Raytracing/InitGui.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Raytracing/RaytracingExample.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Raytracing/RaytracingExample.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Raytracing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Raytracing/RaytracingExample.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Raytracing/RaytracingExample.py [ 35%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshNodeIDFactory.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshNodeIDFactory.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshNodeIDFactory.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshNodeIDFactory.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshNodeIDFactory.cpp [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Raytracing/Templates/LuxClassic.lxs to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Raytracing/Templates/LuxClassic.lxs cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Raytracing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Raytracing/Templates/LuxClassic.lxs /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Raytracing/Templates/LuxClassic.lxs [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Raytracing/Templates/LuxOutdoor.lxs to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Raytracing/Templates/LuxOutdoor.lxs cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Raytracing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Raytracing/Templates/LuxOutdoor.lxs /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Raytracing/Templates/LuxOutdoor.lxs [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Raytracing/Templates/ProjectStd.pov to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Raytracing/Templates/ProjectStd.pov cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Raytracing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Raytracing/Templates/ProjectStd.pov /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Raytracing/Templates/ProjectStd.pov [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Raytracing/Templates/RadiosityNormal.pov to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Raytracing/Templates/RadiosityNormal.pov cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Raytracing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Raytracing/Templates/RadiosityNormal.pov /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Raytracing/Templates/RadiosityNormal.pov [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Raytracing/Templates/RadiosityOutdoorHQ.pov to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Raytracing/Templates/RadiosityOutdoorHQ.pov cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Raytracing && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Raytracing/Templates/RadiosityOutdoorHQ.pov /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Raytracing/Templates/RadiosityOutdoorHQ.pov gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 35%] Built target RaytracingScripts /usr/bin/gmake -f src/Mod/ReverseEngineering/CMakeFiles/ReverseEngineeringScripts.dir/build.make src/Mod/ReverseEngineering/CMakeFiles/ReverseEngineeringScripts.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/ReverseEngineering /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/ReverseEngineering /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/ReverseEngineering/CMakeFiles/ReverseEngineeringScripts.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/ReverseEngineering/CMakeFiles/ReverseEngineeringScripts.dir/build.make src/Mod/ReverseEngineering/CMakeFiles/ReverseEngineeringScripts.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/ReverseEngineering/Init.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/ReverseEngineering/Init.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/ReverseEngineering && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/ReverseEngineering/Init.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/ReverseEngineering/Init.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/ReverseEngineering/InitGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/ReverseEngineering/InitGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/ReverseEngineering && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/ReverseEngineering/InitGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/ReverseEngineering/InitGui.py gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 35%] Built target ReverseEngineeringScripts /usr/bin/gmake -f src/Mod/Robot/CMakeFiles/RobotScripts.dir/build.make src/Mod/Robot/CMakeFiles/RobotScripts.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Robot /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Robot/CMakeFiles/RobotScripts.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Robot/CMakeFiles/RobotScripts.dir/build.make src/Mod/Robot/CMakeFiles/RobotScripts.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/Init.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Robot/Init.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Robot && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/Init.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Robot/Init.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/InitGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Robot/InitGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Robot && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/InitGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Robot/InitGui.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/KukaExporter.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Robot/KukaExporter.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Robot && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/KukaExporter.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Robot/KukaExporter.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/MovieTool.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Robot/MovieTool.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Robot && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/MovieTool.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Robot/MovieTool.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/RobotExample.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Robot/RobotExample.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Robot && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/RobotExample.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Robot/RobotExample.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/RobotExampleTrajectoryOutOfShapes.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Robot/RobotExampleTrajectoryOutOfShapes.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Robot && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/RobotExampleTrajectoryOutOfShapes.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Robot/RobotExampleTrajectoryOutOfShapes.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/Lib/Kuka/kr125_2.pdf to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr125_2.pdf cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Robot && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/Lib/Kuka/kr125_2.pdf /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr125_2.pdf [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/Lib/Kuka/kr125_3.wrl to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr125_3.wrl cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Robot && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/Lib/Kuka/kr125_3.wrl /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr125_3.wrl [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/Lib/Kuka/kr16.wrl to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr16.wrl cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Robot && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/Lib/Kuka/kr16.wrl /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr16.wrl [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/Lib/Kuka/kr210.WRL to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr210.WRL cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Robot && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/Lib/Kuka/kr210.WRL /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr210.WRL [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/Lib/Kuka/kr500_1.csv to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr500_1.csv cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Robot && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/Lib/Kuka/kr500_1.csv /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr500_1.csv [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/Lib/Kuka/kr500_1.wrl to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr500_1.wrl cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Robot && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/Lib/Kuka/kr500_1.wrl /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr500_1.wrl [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/Lib/Kuka/kr_125.csv to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr_125.csv cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Robot && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/Lib/Kuka/kr_125.csv /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr_125.csv [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/Lib/Kuka/kr_16.csv to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr_16.csv cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Robot && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/Lib/Kuka/kr_16.csv /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr_16.csv [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/Lib/Kuka/kr_16.pdf to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr_16.pdf cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Robot && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/Lib/Kuka/kr_16.pdf /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr_16.pdf [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/Lib/Kuka/kr_210_2.csv to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr_210_2.csv cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Robot && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/Lib/Kuka/kr_210_2.csv /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr_210_2.csv [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/Lib/Kuka/kr_210_2.pdf to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr_210_2.pdf cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Robot && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/Lib/Kuka/kr_210_2.pdf /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr_210_2.pdf [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/Lib/Kuka/kr_500_2.pdf to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr_500_2.pdf cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Robot && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Robot/Lib/Kuka/kr_500_2.pdf /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr_500_2.pdf gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 35%] Built target RobotScripts /usr/bin/gmake -f src/Mod/Show/CMakeFiles/Show.dir/build.make src/Mod/Show/CMakeFiles/Show.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Show /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Show/CMakeFiles/Show.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Show/CMakeFiles/Show.dir/build.make src/Mod/Show/CMakeFiles/Show.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show/Containers.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Show/Containers.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Show && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show/Containers.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Show/Containers.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show/DepGraphTools.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Show/DepGraphTools.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Show && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show/DepGraphTools.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Show/DepGraphTools.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show/SceneDetail.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Show/SceneDetail.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Show && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show/SceneDetail.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Show/SceneDetail.py In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshNodeIDFactory.cpp:31: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_algobase.h:65, from /usr/include/c++/13/bits/stl_tree.h:63, from /usr/include/c++/13/set:62, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshIDFactory.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshNodeIDFactory.hxx:30, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshNodeIDFactory.cpp:30: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show/SceneDetails/Camera.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Show/SceneDetails/Camera.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Show && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show/SceneDetails/Camera.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Show/SceneDetails/Camera.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show/SceneDetails/ClipPlane.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Show/SceneDetails/ClipPlane.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Show && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show/SceneDetails/ClipPlane.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Show/SceneDetails/ClipPlane.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show/SceneDetails/ObjectClipPlane.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Show/SceneDetails/ObjectClipPlane.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Show && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show/SceneDetails/ObjectClipPlane.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Show/SceneDetails/ObjectClipPlane.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show/SceneDetails/Pickability.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Show/SceneDetails/Pickability.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Show && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show/SceneDetails/Pickability.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Show/SceneDetails/Pickability.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show/SceneDetails/VProperty.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Show/SceneDetails/VProperty.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Show && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show/SceneDetails/VProperty.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Show/SceneDetails/VProperty.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show/SceneDetails/Workbench.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Show/SceneDetails/Workbench.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Show && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show/SceneDetails/Workbench.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Show/SceneDetails/Workbench.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show/SceneDetails/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Show/SceneDetails/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Show && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show/SceneDetails/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Show/SceneDetails/__init__.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show/ShowUtils.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Show/ShowUtils.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Show && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show/ShowUtils.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Show/ShowUtils.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show/TVObserver.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Show/TVObserver.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Show && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show/TVObserver.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Show/TVObserver.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show/TVStack.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Show/TVStack.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Show && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show/TVStack.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Show/TVStack.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Show/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Show && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Show/__init__.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show/mTempoVis.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Show/mTempoVis.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Show && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Show/mTempoVis.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Show/mTempoVis.py gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 35%] Built target Show /usr/bin/gmake -f src/Mod/Sketcher/CMakeFiles/SketcherScripts.dir/build.make src/Mod/Sketcher/CMakeFiles/SketcherScripts.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Sketcher /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Sketcher /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Sketcher/CMakeFiles/SketcherScripts.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Sketcher/CMakeFiles/SketcherScripts.dir/build.make src/Mod/Sketcher/CMakeFiles/SketcherScripts.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Sketcher/Init.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Sketcher/Init.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Sketcher && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Sketcher/Init.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Sketcher/Init.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Sketcher/InitGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Sketcher/InitGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Sketcher && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Sketcher/InitGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Sketcher/InitGui.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Sketcher/ProfileLib/Hexagon.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Sketcher/ProfileLib/Hexagon.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Sketcher && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Sketcher/ProfileLib/Hexagon.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Sketcher/ProfileLib/Hexagon.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Sketcher/ProfileLib/RegularPolygon.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Sketcher/ProfileLib/RegularPolygon.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Sketcher && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Sketcher/ProfileLib/RegularPolygon.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Sketcher/ProfileLib/RegularPolygon.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Sketcher/ProfileLib/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Sketcher/ProfileLib/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Sketcher && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Sketcher/ProfileLib/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Sketcher/ProfileLib/__init__.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Sketcher/Profiles.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Sketcher/Profiles.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Sketcher && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Sketcher/Profiles.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Sketcher/Profiles.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Sketcher/SketcherExample.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Sketcher/SketcherExample.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Sketcher && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Sketcher/SketcherExample.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Sketcher/SketcherExample.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Sketcher/SketcherTests/TestSketchExpression.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Sketcher/SketcherTests/TestSketchExpression.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Sketcher && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Sketcher/SketcherTests/TestSketchExpression.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Sketcher/SketcherTests/TestSketchExpression.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Sketcher/SketcherTests/TestSketchFillet.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Sketcher/SketcherTests/TestSketchFillet.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Sketcher && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Sketcher/SketcherTests/TestSketchFillet.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Sketcher/SketcherTests/TestSketchFillet.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Sketcher/SketcherTests/TestSketcherSolver.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Sketcher/SketcherTests/TestSketcherSolver.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Sketcher && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Sketcher/SketcherTests/TestSketcherSolver.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Sketcher/SketcherTests/TestSketcherSolver.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Sketcher/SketcherTests/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Sketcher/SketcherTests/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Sketcher && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Sketcher/SketcherTests/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Sketcher/SketcherTests/__init__.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Sketcher/TestSketcherApp.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Sketcher/TestSketcherApp.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Sketcher && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Sketcher/TestSketcherApp.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Sketcher/TestSketcherApp.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Sketcher/TestSketcherGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Sketcher/TestSketcherGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Sketcher && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Sketcher/TestSketcherGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Sketcher/TestSketcherGui.py gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 35%] Built target SketcherScripts /usr/bin/gmake -f src/Mod/Spreadsheet/CMakeFiles/SpreadsheetScripts.dir/build.make src/Mod/Spreadsheet/CMakeFiles/SpreadsheetScripts.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Spreadsheet /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Spreadsheet /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Spreadsheet/CMakeFiles/SpreadsheetScripts.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Spreadsheet/CMakeFiles/SpreadsheetScripts.dir/build.make src/Mod/Spreadsheet/CMakeFiles/SpreadsheetScripts.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Spreadsheet/Init.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Spreadsheet/Init.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Spreadsheet && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Spreadsheet/Init.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Spreadsheet/Init.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Spreadsheet/InitGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Spreadsheet/InitGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Spreadsheet && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Spreadsheet/InitGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Spreadsheet/InitGui.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Spreadsheet/TestSpreadsheet.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Spreadsheet/TestSpreadsheet.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Spreadsheet && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Spreadsheet/TestSpreadsheet.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Spreadsheet/TestSpreadsheet.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Spreadsheet/importXLSX.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Spreadsheet/importXLSX.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Spreadsheet && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Spreadsheet/importXLSX.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Spreadsheet/importXLSX.py gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 35%] Built target SpreadsheetScripts /usr/bin/gmake -f src/Mod/Start/CMakeFiles/StartScripts.dir/build.make src/Mod/Start/CMakeFiles/StartScripts.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start/CMakeFiles/StartScripts.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Start/CMakeFiles/StartScripts.dir/build.make src/Mod/Start/CMakeFiles/StartScripts.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/Init.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Start/Init.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/Init.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Start/Init.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/InitGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Start/InitGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/InitGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Start/InitGui.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/TestStartGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Start/TestStartGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/TestStartGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Start/TestStartGui.py gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 35%] Built target StartScripts /usr/bin/gmake -f src/Mod/Start/CMakeFiles/StartTests.dir/build.make src/Mod/Start/CMakeFiles/StartTests.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start/CMakeFiles/StartTests.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Start/CMakeFiles/StartTests.dir/build.make src/Mod/Start/CMakeFiles/StartTests.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/TestStart/TestStartPage.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Start/TestStart/TestStartPage.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/TestStart/TestStartPage.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Start/TestStart/TestStartPage.py [ 35%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/TestStart/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Start/TestStart/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/TestStart/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Start/TestStart/__init__.py gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 36%] Built target StartTests /usr/bin/gmake -f src/Mod/Start/StartPage/CMakeFiles/StartPage.dir/build.make src/Mod/Start/StartPage/CMakeFiles/StartPage.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start/StartPage /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start/StartPage/CMakeFiles/StartPage.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Start/StartPage/CMakeFiles/StartPage.dir/build.make src/Mod/Start/StartPage/CMakeFiles/StartPage.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 36%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/StartPage.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Start/StartPage/StartPage.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/StartPage.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Start/StartPage/StartPage.py [ 36%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/TranslationTexts.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Start/StartPage/TranslationTexts.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/TranslationTexts.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Start/StartPage/TranslationTexts.py [ 36%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Start/StartPage/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Start/StartPage/__init__.py [ 36%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/EnableDownload.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/EnableDownload.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/EnableDownload.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/EnableDownload.py [ 36%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/LoadCustom.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/LoadCustom.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/LoadCustom.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/LoadCustom.py [ 36%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/LoadExample.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/LoadExample.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/LoadExample.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/LoadExample.py [ 36%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/LoadMRU.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/LoadMRU.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/LoadMRU.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/LoadMRU.py [ 36%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/LoadNew.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/LoadNew.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/LoadNew.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/LoadNew.py [ 36%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/OpenSettings.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/OpenSettings.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/OpenSettings.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/OpenSettings.py [ 36%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/StartPage.css to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/StartPage.css cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/StartPage.css /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/StartPage.css [ 36%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/StartPage.html to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/StartPage.html cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/StartPage.html /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/StartPage.html [ 36%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/StartPage.js to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/StartPage.js cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/StartPage.js /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/StartPage.js [ 36%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/images/developerhub.png to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/images/developerhub.png cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/images/developerhub.png /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/images/developerhub.png [ 36%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/images/freecad.png to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/images/freecad.png cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/images/freecad.png /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/images/freecad.png [ 36%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/images/installed.png to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/images/installed.png cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/images/installed.png /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/images/installed.png [ 36%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/images/manual.png to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/images/manual.png cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/images/manual.png /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/images/manual.png [ 36%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/images/new_file_thumbnail.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/images/new_file_thumbnail.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/images/new_file_thumbnail.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/images/new_file_thumbnail.svg [ 36%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/images/poweruserhub.png to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/images/poweruserhub.png cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/images/poweruserhub.png /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/images/poweruserhub.png [ 36%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/images/settings.png to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/images/settings.png cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/images/settings.png /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/images/settings.png [ 36%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/images/userhub.png to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/images/userhub.png cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Start/StartPage/images/userhub.png /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/Start/StartPage/images/userhub.png gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 36%] Built target StartPage /usr/bin/gmake -f src/Mod/Surface/CMakeFiles/SurfaceScripts.dir/build.make src/Mod/Surface/CMakeFiles/SurfaceScripts.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Surface /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Surface /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Surface/CMakeFiles/SurfaceScripts.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Surface/CMakeFiles/SurfaceScripts.dir/build.make src/Mod/Surface/CMakeFiles/SurfaceScripts.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 36%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshObject.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshObject.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshObject.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshObject.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshObject.cpp [ 36%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Surface/Init.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Surface/Init.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Surface && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Surface/Init.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Surface/Init.py [ 36%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Surface/InitGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Surface/InitGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Surface && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Surface/InitGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Surface/InitGui.py [ 36%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshVolume.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshVolume.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshVolume.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshVolume.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshVolume.cpp gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 36%] Built target SurfaceScripts /usr/bin/gmake -f src/Mod/TechDraw/CMakeFiles/TechDraw_Data.dir/build.make src/Mod/TechDraw/CMakeFiles/TechDraw_Data.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw/CMakeFiles/TechDraw_Data.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/TechDraw/CMakeFiles/TechDraw_Data.dir/build.make src/Mod/TechDraw/CMakeFiles/TechDraw_Data.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 36%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/Init.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/Init.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/Init.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/Init.py [ 36%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/InitGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/InitGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/InitGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/InitGui.py [ 36%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TechDrawTools/CommandMoveView.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TechDrawTools/CommandMoveView.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TechDrawTools/CommandMoveView.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TechDrawTools/CommandMoveView.py [ 36%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TechDrawTools/CommandShareView.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TechDrawTools/CommandShareView.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TechDrawTools/CommandShareView.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TechDrawTools/CommandShareView.py [ 36%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/Gui/DlgPageChooser.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TechDrawTools/Gui/DlgPageChooser.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/Gui/DlgPageChooser.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TechDrawTools/Gui/DlgPageChooser.ui [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/Gui/TaskMoveView.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TechDrawTools/Gui/TaskMoveView.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/Gui/TaskMoveView.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TechDrawTools/Gui/TaskMoveView.ui [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TechDrawTools/TDToolsMovers.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TechDrawTools/TDToolsMovers.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TechDrawTools/TDToolsMovers.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TechDrawTools/TDToolsMovers.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TechDrawTools/TDToolsUtil.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TechDrawTools/TDToolsUtil.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TechDrawTools/TDToolsUtil.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TechDrawTools/TDToolsUtil.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TechDrawTools/TaskMoveView.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TechDrawTools/TaskMoveView.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TechDrawTools/TaskMoveView.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TechDrawTools/TaskMoveView.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TechDrawTools/TaskShareView.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TechDrawTools/TaskShareView.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TechDrawTools/TaskShareView.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TechDrawTools/TaskShareView.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TechDrawTools/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TechDrawTools/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TechDrawTools/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TechDrawTools/__init__.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TestTechDrawApp.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TestTechDrawApp.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TestTechDrawApp.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TestTechDrawApp.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/LineGroup/LineGroup.csv to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/TechDraw/LineGroup/LineGroup.csv cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/LineGroup/LineGroup.csv /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/TechDraw/LineGroup/LineGroup.csv [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/PAT/FCPAT.pat to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/TechDraw/PAT/FCPAT.pat cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/PAT/FCPAT.pat /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Mod/TechDraw/PAT/FCPAT.pat gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 37%] Built target TechDraw_Data /usr/bin/gmake -f src/Mod/TechDraw/CMakeFiles/TDTestTarget.dir/build.make src/Mod/TechDraw/CMakeFiles/TDTestTarget.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw/CMakeFiles/TDTestTarget.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/TechDraw/CMakeFiles/TDTestTarget.dir/build.make src/Mod/TechDraw/CMakeFiles/TDTestTarget.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TDTest/DHatchTest.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TDTest/DHatchTest.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TDTest/DHatchTest.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TDTest/DHatchTest.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TDTest/DProjGroupTest.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TDTest/DProjGroupTest.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TDTest/DProjGroupTest.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TDTest/DProjGroupTest.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TDTest/DVAnnoSymImageTest.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TDTest/DVAnnoSymImageTest.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TDTest/DVAnnoSymImageTest.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TDTest/DVAnnoSymImageTest.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TDTest/DVBalloonTest.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TDTest/DVBalloonTest.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TDTest/DVBalloonTest.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TDTest/DVBalloonTest.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TDTest/DVDimensionTest.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TDTest/DVDimensionTest.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TDTest/DVDimensionTest.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TDTest/DVDimensionTest.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TDTest/DVPartTest.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TDTest/DVPartTest.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TDTest/DVPartTest.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TDTest/DVPartTest.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TDTest/DVSectionTest.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TDTest/DVSectionTest.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TDTest/DVSectionTest.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TDTest/DVSectionTest.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TDTest/TestHatch.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TDTest/TestHatch.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TDTest/TestHatch.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TDTest/TestHatch.svg [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TDTest/TestImage.png to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TDTest/TestImage.png cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TDTest/TestImage.png /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TDTest/TestImage.png [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TDTest/TestSymbol.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TDTest/TestSymbol.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TDTest/TestSymbol.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TDTest/TestSymbol.svg [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TDTest/TestTemplate.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TDTest/TestTemplate.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TDTest/TestTemplate.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TDTest/TestTemplate.svg [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TDTest/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TDTest/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/TechDraw && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/TechDraw/TDTest/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/TechDraw/TDTest/__init__.py gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 37%] Built target TDTestTarget /usr/bin/gmake -f src/Mod/Test/CMakeFiles/Test.dir/build.make src/Mod/Test/CMakeFiles/Test.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Test /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Test/CMakeFiles/Test.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Test/CMakeFiles/Test.dir/build.make src/Mod/Test/CMakeFiles/Test.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/BaseTests.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/BaseTests.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Test && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/BaseTests.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/BaseTests.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/Document.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/Document.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Test && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/Document.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/Document.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/Init.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/Init.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Test && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/Init.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/Init.py In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshCell.hxx:23, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshVolume.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshVolume.cpp:28: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_ElemIterator.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:34: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/InitGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/InitGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Test && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/InitGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/InitGui.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/Menu.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/Menu.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Test && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/Menu.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/Menu.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/Metadata.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/Metadata.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Test && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/Metadata.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/Metadata.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/TestApp.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/TestApp.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Test && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/TestApp.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/TestApp.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/TestData/bad_root_node.xml to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/TestData/bad_root_node.xml cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Test && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/TestData/bad_root_node.xml /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/TestData/bad_root_node.xml [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/TestData/bad_version.xml to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/TestData/bad_version.xml cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Test && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/TestData/bad_version.xml /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/TestData/bad_version.xml [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/TestData/bad_xml.xml to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/TestData/bad_xml.xml cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Test && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/TestData/bad_xml.xml /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/TestData/bad_xml.xml [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/TestData/basic_metadata.xml to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/TestData/basic_metadata.xml cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Test && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/TestData/basic_metadata.xml /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/TestData/basic_metadata.xml [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/TestData/content_items.xml to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/TestData/content_items.xml cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Test && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/TestData/content_items.xml /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/TestData/content_items.xml [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/TestGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/TestGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Test && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/TestGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/TestGui.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/TestPythonSyntax.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/TestPythonSyntax.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Test && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/TestPythonSyntax.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/TestPythonSyntax.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/UnicodeTests.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/UnicodeTests.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Test && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/UnicodeTests.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/UnicodeTests.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/UnitTests.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/UnitTests.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Test && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/UnitTests.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/UnitTests.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/Workbench.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/Workbench.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Test && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/Workbench.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/Workbench.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/__init__.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/__init__.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Test && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/__init__.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/__init__.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/testmakeWireString.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/testmakeWireString.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Test && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/testmakeWireString.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/testmakeWireString.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/unittestgui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/unittestgui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Test && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Test/unittestgui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Test/unittestgui.py gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 37%] Built target Test /usr/bin/gmake -f src/Mod/Tux/CMakeFiles/Tux.dir/build.make src/Mod/Tux/CMakeFiles/Tux.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Tux /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Tux /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Tux/CMakeFiles/Tux.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Tux/CMakeFiles/Tux.dir/build.make src/Mod/Tux/CMakeFiles/Tux.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Tux/InitGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Tux/InitGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Tux && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Tux/InitGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Tux/InitGui.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Tux/NavigationIndicatorGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Tux/NavigationIndicatorGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Tux && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Tux/NavigationIndicatorGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Tux/NavigationIndicatorGui.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Tux/PersistentToolbars.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Tux/PersistentToolbars.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Tux && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Tux/PersistentToolbars.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Tux/PersistentToolbars.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Tux/PersistentToolbarsGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Tux/PersistentToolbarsGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Tux && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Tux/PersistentToolbarsGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Tux/PersistentToolbarsGui.py [ 37%] Generating Tux_rc.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Tux && /usr/lib64/qt5/bin/rcc --generator=python --compress-algo=zlib --compress=1 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Tux/Resources/Tux.qrc -o /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Tux/Tux_rc.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Tux && sed /^#\ /d /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Tux/Tux_rc.py >"/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Tux/Tux_rc.py.tmp" && mv /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Tux/Tux_rc.py.tmp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Tux/Tux_rc.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Tux/Tux_rc.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Tux/Tux_rc.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Tux && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Tux/Tux_rc.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Tux/Tux_rc.py gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 37%] Built target Tux /usr/bin/gmake -f src/Mod/Web/CMakeFiles/WebScripts.dir/build.make src/Mod/Web/CMakeFiles/WebScripts.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Web /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Web /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Web/CMakeFiles/WebScripts.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Web/CMakeFiles/WebScripts.dir/build.make src/Mod/Web/CMakeFiles/WebScripts.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Web/Init.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Web/Init.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Web && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Web/Init.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Web/Init.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Web/InitGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Web/InitGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Web && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Web/InitGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Web/InitGui.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Web/TestWebGui.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Web/TestWebGui.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Web && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Web/TestWebGui.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Mod/Web/TestWebGui.py gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 37%] Built target WebScripts /usr/bin/gmake -f src/Gui/CMakeFiles/FreeCADGui_Resources.dir/build.make src/Gui/CMakeFiles/FreeCADGui_Resources.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/CMakeFiles/FreeCADGui_Resources.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Gui/CMakeFiles/FreeCADGui_Resources.dir/build.make src/Gui/CMakeFiles/FreeCADGui_Resources.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/RemoteDebugger.py to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Ext/freecad/gui/RemoteDebugger.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/RemoteDebugger.py /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Ext/freecad/gui/RemoteDebugger.py [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/RemoteDebugger.ui to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Ext/freecad/gui/RemoteDebugger.ui cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/RemoteDebugger.ui /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/Ext/freecad/gui/RemoteDebugger.ui [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/3Dconnexion/3DConnexion.xml to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/3Dconnexion/3DConnexion.xml cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/3Dconnexion/3DConnexion.xml /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/3Dconnexion/3DConnexion.xml gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 37%] Built target FreeCADGui_Resources /usr/bin/gmake -f src/Gui/Stylesheets/CMakeFiles/Stylesheets_data.dir/build.make src/Gui/Stylesheets/CMakeFiles/Stylesheets_data.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets/CMakeFiles/Stylesheets_data.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Gui/Stylesheets/CMakeFiles/Stylesheets_data.dir/build.make src/Gui/Stylesheets/CMakeFiles/Stylesheets_data.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/Behave-dark.qss to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/Behave-dark.qss cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/Behave-dark.qss /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/Behave-dark.qss [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/Dark-blue.qss to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/Dark-blue.qss cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/Dark-blue.qss /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/Dark-blue.qss [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/Dark-contrast.qss to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/Dark-contrast.qss cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/Dark-contrast.qss /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/Dark-contrast.qss [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/Dark-green.qss to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/Dark-green.qss cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/Dark-green.qss /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/Dark-green.qss [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/Dark-orange.qss to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/Dark-orange.qss cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/Dark-orange.qss /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/Dark-orange.qss [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/Darker-blue.qss to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/Darker-blue.qss cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/Darker-blue.qss /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/Darker-blue.qss [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/Darker-green.qss to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/Darker-green.qss cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/Darker-green.qss /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/Darker-green.qss [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/Darker-orange.qss to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/Darker-orange.qss cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/Darker-orange.qss /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/Darker-orange.qss [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/Light-blue.qss to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/Light-blue.qss cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/Light-blue.qss /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/Light-blue.qss [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/Light-green.qss to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/Light-green.qss cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/Light-green.qss /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/Light-green.qss [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/Light-orange.qss to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/Light-orange.qss cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/Light-orange.qss /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/Light-orange.qss [ 37%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/ProDark.qss to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/ProDark.qss cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/ProDark.qss /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/ProDark.qss [ 38%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_PolygonalFaceOfNodes.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_PolygonalFaceOfNodes.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_PolygonalFaceOfNodes.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_PolygonalFaceOfNodes.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_PolygonalFaceOfNodes.cpp [ 38%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/Hmovetoolbar_dark.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/Hmovetoolbar_dark.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/Hmovetoolbar_dark.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/Hmovetoolbar_dark.svg [ 38%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/Hmovetoolbar_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/Hmovetoolbar_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/Hmovetoolbar_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/Hmovetoolbar_light.svg [ 38%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/Hsepartoolbar_dark.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/Hsepartoolbar_dark.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/Hsepartoolbar_dark.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/Hsepartoolbar_dark.svg [ 38%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/Hsepartoolbar_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/Hsepartoolbar_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/Hsepartoolbar_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/Hsepartoolbar_light.svg [ 38%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/Vmovetoolbar_dark.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/Vmovetoolbar_dark.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/Vmovetoolbar_dark.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/Vmovetoolbar_dark.svg [ 38%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/Vmovetoolbar_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/Vmovetoolbar_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/Vmovetoolbar_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/Vmovetoolbar_light.svg [ 38%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/Vsepartoolbar_dark.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/Vsepartoolbar_dark.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/Vsepartoolbar_dark.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/Vsepartoolbar_dark.svg [ 38%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/Vsepartoolbar_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/Vsepartoolbar_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/Vsepartoolbar_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/Vsepartoolbar_light.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/background_freecad.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/background_freecad.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/background_freecad.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/background_freecad.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/background_freecad_dark.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/background_freecad_dark.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/background_freecad_dark.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/background_freecad_dark.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/background_freecad_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/background_freecad_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/background_freecad_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/background_freecad_light.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/branch_end_closed_dark.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_end_closed_dark.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/branch_end_closed_dark.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_end_closed_dark.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/branch_end_closed_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_end_closed_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/branch_end_closed_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_end_closed_light.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/branch_end_dark.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_end_dark.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/branch_end_dark.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_end_dark.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/branch_end_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_end_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/branch_end_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_end_light.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/branch_end_open_dark.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_end_open_dark.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/branch_end_open_dark.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_end_open_dark.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/branch_end_open_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_end_open_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/branch_end_open_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_end_open_light.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/branch_more_closed_dark.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_more_closed_dark.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/branch_more_closed_dark.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_more_closed_dark.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/branch_more_closed_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_more_closed_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/branch_more_closed_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_more_closed_light.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/branch_more_dark.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_more_dark.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/branch_more_dark.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_more_dark.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/branch_more_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_more_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/branch_more_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_more_light.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/branch_more_open_dark.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_more_open_dark.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/branch_more_open_dark.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_more_open_dark.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/branch_more_open_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_more_open_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/branch_more_open_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_more_open_light.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/branch_vline_dark.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_vline_dark.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/branch_vline_dark.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_vline_dark.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/branch_vline_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_vline_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/branch_vline_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_vline_light.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/checkbox_indeterminate_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/checkbox_indeterminate_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/checkbox_indeterminate_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/checkbox_indeterminate_light.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/checkbox_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/checkbox_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/checkbox_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/checkbox_light.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/close_dark.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/close_dark.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/close_dark.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/close_dark.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/close_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/close_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/close_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/close_light.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/down_arrow_dark.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/down_arrow_dark.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/down_arrow_dark.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/down_arrow_dark.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/down_arrow_darker.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/down_arrow_darker.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/down_arrow_darker.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/down_arrow_darker.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/down_arrow_disabled_dark.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/down_arrow_disabled_dark.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/down_arrow_disabled_dark.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/down_arrow_disabled_dark.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/down_arrow_disabled_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/down_arrow_disabled_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/down_arrow_disabled_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/down_arrow_disabled_light.svg In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshCell.hxx:23, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshFace.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_PolygonalFaceOfNodes.hxx:30, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_PolygonalFaceOfNodes.cpp:29: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_ElemIterator.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:34: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/down_arrow_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/down_arrow_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/down_arrow_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/down_arrow_light.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/down_arrow_lighter.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/down_arrow_lighter.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/down_arrow_lighter.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/down_arrow_lighter.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/left_arrow_dark.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/left_arrow_dark.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/left_arrow_dark.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/left_arrow_dark.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/left_arrow_darker.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/left_arrow_darker.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/left_arrow_darker.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/left_arrow_darker.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/left_arrow_disabled_dark.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/left_arrow_disabled_dark.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/left_arrow_disabled_dark.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/left_arrow_disabled_dark.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/left_arrow_disabled_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/left_arrow_disabled_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/left_arrow_disabled_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/left_arrow_disabled_light.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/left_arrow_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/left_arrow_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/left_arrow_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/left_arrow_light.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/left_arrow_lighter.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/left_arrow_lighter.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/left_arrow_lighter.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/left_arrow_lighter.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/more_dark.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/more_dark.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/more_dark.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/more_dark.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/more_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/more_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/more_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/more_light.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/radiobutton_dark.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/radiobutton_dark.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/radiobutton_dark.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/radiobutton_dark.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/radiobutton_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/radiobutton_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/radiobutton_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/radiobutton_light.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/right_arrow_dark.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/right_arrow_dark.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/right_arrow_dark.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/right_arrow_dark.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/right_arrow_darker.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/right_arrow_darker.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/right_arrow_darker.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/right_arrow_darker.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/right_arrow_disabled_dark.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/right_arrow_disabled_dark.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/right_arrow_disabled_dark.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/right_arrow_disabled_dark.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/right_arrow_disabled_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/right_arrow_disabled_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/right_arrow_disabled_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/right_arrow_disabled_light.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/right_arrow_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/right_arrow_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/right_arrow_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/right_arrow_light.svg [ 39%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/right_arrow_lighter.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/right_arrow_lighter.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/right_arrow_lighter.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/right_arrow_lighter.svg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/sizegrip_dark.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/sizegrip_dark.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/sizegrip_dark.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/sizegrip_dark.svg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/sizegrip_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/sizegrip_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/sizegrip_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/sizegrip_light.svg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/splitter_horizontal_dark.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/splitter_horizontal_dark.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/splitter_horizontal_dark.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/splitter_horizontal_dark.svg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/splitter_horizontal_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/splitter_horizontal_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/splitter_horizontal_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/splitter_horizontal_light.svg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/splitter_vertical_dark.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/splitter_vertical_dark.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/splitter_vertical_dark.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/splitter_vertical_dark.svg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/splitter_vertical_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/splitter_vertical_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/splitter_vertical_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/splitter_vertical_light.svg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/transparent.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/transparent.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/transparent.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/transparent.svg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/undock_dark.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/undock_dark.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/undock_dark.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/undock_dark.svg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/undock_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/undock_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/undock_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/undock_light.svg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/up-down_arrow_dark.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/up-down_arrow_dark.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/up-down_arrow_dark.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/up-down_arrow_dark.svg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/up-down_arrow_darker.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/up-down_arrow_darker.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/up-down_arrow_darker.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/up-down_arrow_darker.svg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/up-down_arrow_disabled_dark.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/up-down_arrow_disabled_dark.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/up-down_arrow_disabled_dark.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/up-down_arrow_disabled_dark.svg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/up-down_arrow_disabled_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/up-down_arrow_disabled_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/up-down_arrow_disabled_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/up-down_arrow_disabled_light.svg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/up-down_arrow_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/up-down_arrow_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/up-down_arrow_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/up-down_arrow_light.svg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/up-down_arrow_lighter.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/up-down_arrow_lighter.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/up-down_arrow_lighter.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/up-down_arrow_lighter.svg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/up_arrow_dark.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/up_arrow_dark.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/up_arrow_dark.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/up_arrow_dark.svg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/up_arrow_darker.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/up_arrow_darker.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/up_arrow_darker.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/up_arrow_darker.svg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/up_arrow_disabled_dark.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/up_arrow_disabled_dark.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/up_arrow_disabled_dark.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/up_arrow_disabled_dark.svg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/up_arrow_disabled_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/up_arrow_disabled_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/up_arrow_disabled_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/up_arrow_disabled_light.svg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/up_arrow_light.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/up_arrow_light.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/up_arrow_light.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/up_arrow_light.svg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/up_arrow_lighter.svg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/up_arrow_lighter.svg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/Stylesheets/images_dark-light/up_arrow_lighter.svg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/Stylesheets/images_dark-light/up_arrow_lighter.svg gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 40%] Built target Stylesheets_data /usr/bin/gmake -f src/Gui/PreferencePacks/CMakeFiles/PreferencePacks_data.dir/build.make src/Gui/PreferencePacks/CMakeFiles/PreferencePacks_data.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/PreferencePacks /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/PreferencePacks /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/PreferencePacks/CMakeFiles/PreferencePacks_data.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Gui/PreferencePacks/CMakeFiles/PreferencePacks_data.dir/build.make src/Gui/PreferencePacks/CMakeFiles/PreferencePacks_data.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' gmake[2]: Nothing to be done for 'src/Gui/PreferencePacks/CMakeFiles/PreferencePacks_data.dir/build'. gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 40%] Built target PreferencePacks_data /usr/bin/gmake -f src/Gui/PreferencePackTemplates/CMakeFiles/PreferencePackTemplates_data.dir/build.make src/Gui/PreferencePackTemplates/CMakeFiles/PreferencePackTemplates_data.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/PreferencePackTemplates /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/PreferencePackTemplates /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/PreferencePackTemplates/CMakeFiles/PreferencePackTemplates_data.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Gui/PreferencePackTemplates/CMakeFiles/PreferencePackTemplates_data.dir/build.make src/Gui/PreferencePackTemplates/CMakeFiles/PreferencePackTemplates_data.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/PreferencePackTemplates/Arch_Colors.cfg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/PreferencePackTemplates/Arch_Colors.cfg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/PreferencePackTemplates && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/PreferencePackTemplates/Arch_Colors.cfg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/PreferencePackTemplates/Arch_Colors.cfg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/PreferencePackTemplates/Console_Colors.cfg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/PreferencePackTemplates/Console_Colors.cfg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/PreferencePackTemplates && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/PreferencePackTemplates/Console_Colors.cfg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/PreferencePackTemplates/Console_Colors.cfg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/PreferencePackTemplates/Draft_Colors.cfg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/PreferencePackTemplates/Draft_Colors.cfg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/PreferencePackTemplates && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/PreferencePackTemplates/Draft_Colors.cfg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/PreferencePackTemplates/Draft_Colors.cfg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/PreferencePackTemplates/Editor_Colors.cfg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/PreferencePackTemplates/Editor_Colors.cfg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/PreferencePackTemplates && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/PreferencePackTemplates/Editor_Colors.cfg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/PreferencePackTemplates/Editor_Colors.cfg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/PreferencePackTemplates/Editor_Font.cfg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/PreferencePackTemplates/Editor_Font.cfg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/PreferencePackTemplates && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/PreferencePackTemplates/Editor_Font.cfg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/PreferencePackTemplates/Editor_Font.cfg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/PreferencePackTemplates/Main_window_layout.cfg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/PreferencePackTemplates/Main_window_layout.cfg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/PreferencePackTemplates && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/PreferencePackTemplates/Main_window_layout.cfg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/PreferencePackTemplates/Main_window_layout.cfg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/PreferencePackTemplates/Path_Colors.cfg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/PreferencePackTemplates/Path_Colors.cfg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/PreferencePackTemplates && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/PreferencePackTemplates/Path_Colors.cfg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/PreferencePackTemplates/Path_Colors.cfg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/PreferencePackTemplates/Sketcher_Colors.cfg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/PreferencePackTemplates/Sketcher_Colors.cfg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/PreferencePackTemplates && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/PreferencePackTemplates/Sketcher_Colors.cfg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/PreferencePackTemplates/Sketcher_Colors.cfg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/PreferencePackTemplates/Start_Colors.cfg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/PreferencePackTemplates/Start_Colors.cfg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/PreferencePackTemplates && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/PreferencePackTemplates/Start_Colors.cfg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/PreferencePackTemplates/Start_Colors.cfg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/PreferencePackTemplates/TechDraw_Colors.cfg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/PreferencePackTemplates/TechDraw_Colors.cfg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/PreferencePackTemplates && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/PreferencePackTemplates/TechDraw_Colors.cfg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/PreferencePackTemplates/TechDraw_Colors.cfg [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/PreferencePackTemplates/Window_Colors.cfg to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/PreferencePackTemplates/Window_Colors.cfg cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Gui/PreferencePackTemplates && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/src/Gui/PreferencePackTemplates/Window_Colors.cfg /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/usr/share/freecad/Gui/PreferencePackTemplates/Window_Colors.cfg gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 40%] Built target PreferencePackTemplates_data /usr/bin/gmake -f data/examples/CMakeFiles/Example_data.dir/build.make data/examples/CMakeFiles/Example_data.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/data/examples /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/data/examples /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/data/examples/CMakeFiles/Example_data.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f data/examples/CMakeFiles/Example_data.dir/build.make data/examples/CMakeFiles/Example_data.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/data/examples/ArchDetail.FCStd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/data/examples/ArchDetail.FCStd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/data/examples && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/data/examples/ArchDetail.FCStd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/data/examples/ArchDetail.FCStd [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/data/examples/EngineBlock.FCStd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/data/examples/EngineBlock.FCStd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/data/examples && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/data/examples/EngineBlock.FCStd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/data/examples/EngineBlock.FCStd [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/data/examples/FemCalculixCantilever2D.FCStd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/data/examples/FemCalculixCantilever2D.FCStd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/data/examples && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/data/examples/FemCalculixCantilever2D.FCStd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/data/examples/FemCalculixCantilever2D.FCStd [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/data/examples/FemCalculixCantilever3D.FCStd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/data/examples/FemCalculixCantilever3D.FCStd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/data/examples && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/data/examples/FemCalculixCantilever3D.FCStd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/data/examples/FemCalculixCantilever3D.FCStd [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/data/examples/FemCalculixCantilever3D_newSolver.FCStd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/data/examples/FemCalculixCantilever3D_newSolver.FCStd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/data/examples && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/data/examples/FemCalculixCantilever3D_newSolver.FCStd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/data/examples/FemCalculixCantilever3D_newSolver.FCStd [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/data/examples/PartDesignExample.FCStd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/data/examples/PartDesignExample.FCStd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/data/examples && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/data/examples/PartDesignExample.FCStd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/data/examples/PartDesignExample.FCStd [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/data/examples/RobotExample.FCStd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/data/examples/RobotExample.FCStd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/data/examples && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/data/examples/RobotExample.FCStd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/data/examples/RobotExample.FCStd [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/data/examples/Schenkel.stp to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/data/examples/Schenkel.stp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/data/examples && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/data/examples/Schenkel.stp /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/data/examples/Schenkel.stp [ 40%] Copying /builddir/build/BUILD/FreeCAD-0.20.2/data/examples/draft_test_objects.FCStd to /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/data/examples/draft_test_objects.FCStd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/data/examples && /usr/bin/cmake -E copy /builddir/build/BUILD/FreeCAD-0.20.2/data/examples/draft_test_objects.FCStd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/data/examples/draft_test_objects.FCStd gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 40%] Built target Example_data /usr/bin/gmake -f src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/build.make src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/build.make src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 40%] Building CXX object src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/E57Format_autogen/mocs_compilation.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/g++ -DCRCPP_BRANCHLESS -DCRCPP_USE_CPP11 -DE57Format_EXPORTS -DE57_DEBUG -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DREVISION_ID=\"E57Format-2.2.1-x86_64-linux-gcc13\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/extern/CRCpp/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/include -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=c++11 -fPIC -MD -MT src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/E57Format_autogen/mocs_compilation.cpp.o -MF CMakeFiles/E57Format.dir/E57Format_autogen/mocs_compilation.cpp.o.d -o CMakeFiles/E57Format.dir/E57Format_autogen/mocs_compilation.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/mocs_compilation.cpp [ 40%] Building CXX object src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/BlobNodeImpl.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/g++ -DCRCPP_BRANCHLESS -DCRCPP_USE_CPP11 -DE57Format_EXPORTS -DE57_DEBUG -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DREVISION_ID=\"E57Format-2.2.1-x86_64-linux-gcc13\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/extern/CRCpp/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/include -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=c++11 -fPIC -MD -MT src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/BlobNodeImpl.cpp.o -MF CMakeFiles/E57Format.dir/src/BlobNodeImpl.cpp.o.d -o CMakeFiles/E57Format.dir/src/BlobNodeImpl.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src/BlobNodeImpl.cpp [ 40%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_PolyhedralVolumeOfNodes.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_PolyhedralVolumeOfNodes.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_PolyhedralVolumeOfNodes.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_PolyhedralVolumeOfNodes.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_PolyhedralVolumeOfNodes.cpp In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshCell.hxx:23, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshVolume.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_VolumeOfNodes.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_PolyhedralVolumeOfNodes.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_PolyhedralVolumeOfNodes.cpp:29: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_ElemIterator.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:34: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 41%] Building CXX object src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/CheckedFile.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/g++ -DCRCPP_BRANCHLESS -DCRCPP_USE_CPP11 -DE57Format_EXPORTS -DE57_DEBUG -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DREVISION_ID=\"E57Format-2.2.1-x86_64-linux-gcc13\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/extern/CRCpp/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/include -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=c++11 -fPIC -MD -MT src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/CheckedFile.cpp.o -MF CMakeFiles/E57Format.dir/src/CheckedFile.cpp.o.d -o CMakeFiles/E57Format.dir/src/CheckedFile.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src/CheckedFile.cpp [ 41%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_Position.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_Position.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_Position.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_Position.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_Position.cpp [ 41%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_QuadraticEdge.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_QuadraticEdge.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_QuadraticEdge.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_QuadraticEdge.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_QuadraticEdge.cpp [ 41%] Building CXX object src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/Common.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/g++ -DCRCPP_BRANCHLESS -DCRCPP_USE_CPP11 -DE57Format_EXPORTS -DE57_DEBUG -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DREVISION_ID=\"E57Format-2.2.1-x86_64-linux-gcc13\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/extern/CRCpp/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/include -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=c++11 -fPIC -MD -MT src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/Common.cpp.o -MF CMakeFiles/E57Format.dir/src/Common.cpp.o.d -o CMakeFiles/E57Format.dir/src/Common.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src/Common.cpp In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshCell.hxx:23, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshEdge.hxx:29, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_LinearEdge.hxx:30, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_QuadraticEdge.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_QuadraticEdge.cpp:28: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_ElemIterator.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:34: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 41%] Building CXX object src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/CompressedVectorNodeImpl.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/g++ -DCRCPP_BRANCHLESS -DCRCPP_USE_CPP11 -DE57Format_EXPORTS -DE57_DEBUG -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DREVISION_ID=\"E57Format-2.2.1-x86_64-linux-gcc13\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/extern/CRCpp/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/include -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=c++11 -fPIC -MD -MT src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/CompressedVectorNodeImpl.cpp.o -MF CMakeFiles/E57Format.dir/src/CompressedVectorNodeImpl.cpp.o.d -o CMakeFiles/E57Format.dir/src/CompressedVectorNodeImpl.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src/CompressedVectorNodeImpl.cpp [ 41%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_QuadraticFaceOfNodes.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_QuadraticFaceOfNodes.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_QuadraticFaceOfNodes.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_QuadraticFaceOfNodes.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_QuadraticFaceOfNodes.cpp In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshCell.hxx:23, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshFace.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_QuadraticFaceOfNodes.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_QuadraticFaceOfNodes.cpp:28: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_ElemIterator.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:34: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 41%] Building CXX object src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/CompressedVectorReaderImpl.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/g++ -DCRCPP_BRANCHLESS -DCRCPP_USE_CPP11 -DE57Format_EXPORTS -DE57_DEBUG -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DREVISION_ID=\"E57Format-2.2.1-x86_64-linux-gcc13\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/extern/CRCpp/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/include -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=c++11 -fPIC -MD -MT src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/CompressedVectorReaderImpl.cpp.o -MF CMakeFiles/E57Format.dir/src/CompressedVectorReaderImpl.cpp.o.d -o CMakeFiles/E57Format.dir/src/CompressedVectorReaderImpl.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src/CompressedVectorReaderImpl.cpp [ 41%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_QuadraticVolumeOfNodes.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_QuadraticVolumeOfNodes.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_QuadraticVolumeOfNodes.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_QuadraticVolumeOfNodes.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_QuadraticVolumeOfNodes.cpp In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshCell.hxx:23, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshVolume.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_QuadraticVolumeOfNodes.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_QuadraticVolumeOfNodes.cpp:28: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_ElemIterator.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:34: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 41%] Building CXX object src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/CompressedVectorWriterImpl.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/g++ -DCRCPP_BRANCHLESS -DCRCPP_USE_CPP11 -DE57Format_EXPORTS -DE57_DEBUG -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DREVISION_ID=\"E57Format-2.2.1-x86_64-linux-gcc13\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/extern/CRCpp/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/include -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=c++11 -fPIC -MD -MT src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/CompressedVectorWriterImpl.cpp.o -MF CMakeFiles/E57Format.dir/src/CompressedVectorWriterImpl.cpp.o.d -o CMakeFiles/E57Format.dir/src/CompressedVectorWriterImpl.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src/CompressedVectorWriterImpl.cpp [ 41%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_SpacePosition.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_SpacePosition.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_SpacePosition.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_SpacePosition.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_SpacePosition.cpp [ 41%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_UnstructuredGrid.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_UnstructuredGrid.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_UnstructuredGrid.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_UnstructuredGrid.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_UnstructuredGrid.cpp [ 41%] Building CXX object src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/DecodeChannel.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/g++ -DCRCPP_BRANCHLESS -DCRCPP_USE_CPP11 -DE57Format_EXPORTS -DE57_DEBUG -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DREVISION_ID=\"E57Format-2.2.1-x86_64-linux-gcc13\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/extern/CRCpp/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/include -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=c++11 -fPIC -MD -MT src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/DecodeChannel.cpp.o -MF CMakeFiles/E57Format.dir/src/DecodeChannel.cpp.o.d -o CMakeFiles/E57Format.dir/src/DecodeChannel.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src/DecodeChannel.cpp In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshNode.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_Mesh.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_UnstructuredGrid.cpp:21: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_iterator_base_funcs.h:66, from /usr/include/c++/13/string:47, from /usr/include/c++/13/bits/locale_classes.h:40, from /usr/include/c++/13/bits/ios_base.h:41, from /usr/include/c++/13/ios:44, from /usr/include/c++/13/istream:40, from /usr/include/c++/13/fstream:40, from /usr/include/vtk/vtkIOStream.h:29, from /usr/include/vtk/vtkSystemIncludes.h:39, from /usr/include/vtk/vtkIndent.h:28, from /usr/include/vtk/vtkObjectBase.h:53, from /usr/include/vtk/vtkObject.h:45, from /usr/include/vtk/vtkAbstractCellLinks.h:35, from /usr/include/vtk/vtkUnstructuredGrid.h:31, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_UnstructuredGrid.hxx:29, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_UnstructuredGrid.cpp:20: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 41%] Building CXX object src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/Decoder.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/g++ -DCRCPP_BRANCHLESS -DCRCPP_USE_CPP11 -DE57Format_EXPORTS -DE57_DEBUG -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DREVISION_ID=\"E57Format-2.2.1-x86_64-linux-gcc13\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/extern/CRCpp/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/include -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=c++11 -fPIC -MD -MT src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/Decoder.cpp.o -MF CMakeFiles/E57Format.dir/src/Decoder.cpp.o.d -o CMakeFiles/E57Format.dir/src/Decoder.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src/Decoder.cpp [ 41%] Building CXX object src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/Encoder.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/g++ -DCRCPP_BRANCHLESS -DCRCPP_USE_CPP11 -DE57Format_EXPORTS -DE57_DEBUG -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DREVISION_ID=\"E57Format-2.2.1-x86_64-linux-gcc13\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/extern/CRCpp/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/include -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=c++11 -fPIC -MD -MT src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/Encoder.cpp.o -MF CMakeFiles/E57Format.dir/src/Encoder.cpp.o.d -o CMakeFiles/E57Format.dir/src/Encoder.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src/Encoder.cpp [ 41%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_VertexPosition.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_VertexPosition.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_VertexPosition.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VertexPosition.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_VertexPosition.cpp [ 41%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_VolumeOfFaces.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_VolumeOfFaces.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_VolumeOfFaces.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VolumeOfFaces.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_VolumeOfFaces.cpp In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshCell.hxx:23, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshVolume.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_VolumeOfFaces.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_VolumeOfFaces.cpp:32: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_ElemIterator.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:34: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 41%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_VolumeOfNodes.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_VolumeOfNodes.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_VolumeOfNodes.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VolumeOfNodes.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_VolumeOfNodes.cpp In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshCell.hxx:23, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshVolume.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_VolumeOfNodes.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_VolumeOfNodes.cpp:29: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_ElemIterator.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:34: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 41%] Building CXX object src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/FloatNodeImpl.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/g++ -DCRCPP_BRANCHLESS -DCRCPP_USE_CPP11 -DE57Format_EXPORTS -DE57_DEBUG -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DREVISION_ID=\"E57Format-2.2.1-x86_64-linux-gcc13\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/extern/CRCpp/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/include -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=c++11 -fPIC -MD -MT src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/FloatNodeImpl.cpp.o -MF CMakeFiles/E57Format.dir/src/FloatNodeImpl.cpp.o.d -o CMakeFiles/E57Format.dir/src/FloatNodeImpl.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src/FloatNodeImpl.cpp [ 41%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_VolumeTool.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_VolumeTool.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_VolumeTool.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VolumeTool.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_VolumeTool.cpp [ 41%] Building CXX object src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/IntegerNodeImpl.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/g++ -DCRCPP_BRANCHLESS -DCRCPP_USE_CPP11 -DE57Format_EXPORTS -DE57_DEBUG -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DREVISION_ID=\"E57Format-2.2.1-x86_64-linux-gcc13\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/extern/CRCpp/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/include -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=c++11 -fPIC -MD -MT src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/IntegerNodeImpl.cpp.o -MF CMakeFiles/E57Format.dir/src/IntegerNodeImpl.cpp.o.d -o CMakeFiles/E57Format.dir/src/IntegerNodeImpl.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src/IntegerNodeImpl.cpp In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_VolumeTool.cpp:33: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_algobase.h:65, from /usr/include/c++/13/vector:62, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_VolumeTool.hxx:39, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_VolumeTool.cpp:31: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 41%] Building CXX object src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/NodeImpl.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/g++ -DCRCPP_BRANCHLESS -DCRCPP_USE_CPP11 -DE57Format_EXPORTS -DE57_DEBUG -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DREVISION_ID=\"E57Format-2.2.1-x86_64-linux-gcc13\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/extern/CRCpp/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/include -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=c++11 -fPIC -MD -MT src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/NodeImpl.cpp.o -MF CMakeFiles/E57Format.dir/src/NodeImpl.cpp.o.d -o CMakeFiles/E57Format.dir/src/NodeImpl.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src/NodeImpl.cpp [ 41%] Building CXX object src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/Packet.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/g++ -DCRCPP_BRANCHLESS -DCRCPP_USE_CPP11 -DE57Format_EXPORTS -DE57_DEBUG -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DREVISION_ID=\"E57Format-2.2.1-x86_64-linux-gcc13\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/extern/CRCpp/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/include -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=c++11 -fPIC -MD -MT src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/Packet.cpp.o -MF CMakeFiles/E57Format.dir/src/Packet.cpp.o.d -o CMakeFiles/E57Format.dir/src/Packet.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src/Packet.cpp [ 41%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkCellIterator.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkCellIterator.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkCellIterator.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkCellIterator.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkCellIterator.cpp In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshNode.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_Mesh.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_VtkCellIterator.hxx:24, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkCellIterator.cpp:20: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_ElemIterator.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_VtkCellIterator.hxx:23: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 41%] Building CXX object src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/ImageFileImpl.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/g++ -DCRCPP_BRANCHLESS -DCRCPP_USE_CPP11 -DE57Format_EXPORTS -DE57_DEBUG -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DREVISION_ID=\"E57Format-2.2.1-x86_64-linux-gcc13\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/extern/CRCpp/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/include -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=c++11 -fPIC -MD -MT src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/ImageFileImpl.cpp.o -MF CMakeFiles/E57Format.dir/src/ImageFileImpl.cpp.o.d -o CMakeFiles/E57Format.dir/src/ImageFileImpl.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src/ImageFileImpl.cpp [ 41%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkEdge.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkEdge.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkEdge.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkEdge.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkEdge.cpp In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshCell.hxx:23, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshEdge.hxx:29, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_VtkEdge.hxx:29, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkEdge.cpp:20: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_ElemIterator.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:34: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 41%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkFace.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkFace.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkFace.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkFace.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkFace.cpp [ 41%] Building CXX object src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/ReaderImpl.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/g++ -DCRCPP_BRANCHLESS -DCRCPP_USE_CPP11 -DE57Format_EXPORTS -DE57_DEBUG -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DREVISION_ID=\"E57Format-2.2.1-x86_64-linux-gcc13\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/extern/CRCpp/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/include -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=c++11 -fPIC -MD -MT src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/ReaderImpl.cpp.o -MF CMakeFiles/E57Format.dir/src/ReaderImpl.cpp.o.d -o CMakeFiles/E57Format.dir/src/ReaderImpl.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src/ReaderImpl.cpp In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshCell.hxx:23, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshFace.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_VtkFace.hxx:25, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkFace.cpp:20: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_ElemIterator.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:34: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 41%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkVolume.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkVolume.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkVolume.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkVolume.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkVolume.cpp In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshCell.hxx:23, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshVolume.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_VtkVolume.hxx:25, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkVolume.cpp:20: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_ElemIterator.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:34: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 41%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/Utils_SALOME_Exception.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/Utils_SALOME_Exception.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/Utils_SALOME_Exception.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/Utils_SALOME_Exception.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/Utils_SALOME_Exception.cpp [ 41%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/chrono.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/chrono.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/chrono.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/chrono.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/chrono.cpp [ 41%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/duplicate.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/duplicate.cpp.o -MF CMakeFiles/SMDS.dir/src/SMDS/duplicate.cpp.o.d -o CMakeFiles/SMDS.dir/src/SMDS/duplicate.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/duplicate.cpp [ 41%] Linking CXX shared library ../../../lib/libSMDS.so cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/cmake -E cmake_link_script CMakeFiles/SMDS.dir/link.txt --verbose=1 /usr/bin/g++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes -shared -Wl,-soname,libSMDS.so -o ../../../lib/libSMDS.so CMakeFiles/SMDS.dir/src/SMDS/SMDS_BallElement.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_Downward.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_EdgePosition.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_FaceOfEdges.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_FaceOfNodes.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_FacePosition.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_IteratorOfElements.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_LinearEdge.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_Mesh.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_Mesh0DElement.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshCell.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshEdge.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshElement.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshElementIDFactory.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshFace.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshGroup.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshIDFactory.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshNode.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshNodeIDFactory.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshObject.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshVolume.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_PolygonalFaceOfNodes.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_PolyhedralVolumeOfNodes.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_Position.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_QuadraticEdge.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_QuadraticFaceOfNodes.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_QuadraticVolumeOfNodes.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_SpacePosition.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_UnstructuredGrid.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VertexPosition.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VolumeOfFaces.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VolumeOfNodes.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VolumeTool.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkCellIterator.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkEdge.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkFace.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkVolume.cpp.o CMakeFiles/SMDS.dir/src/SMDS/Utils_SALOME_Exception.cpp.o CMakeFiles/SMDS.dir/src/SMDS/chrono.cpp.o CMakeFiles/SMDS.dir/src/SMDS/duplicate.cpp.o /usr/lib64/libTKSTL.so.7.6.3 /usr/lib64/libTKOffset.so.7.6.3 /usr/lib64/libTKFeat.so.7.6.3 /usr/lib64/libTKBin.so.7.6.3 /usr/lib64/libTKBinL.so.7.6.3 /usr/lib64/libTKXDESTEP.so.7.6.3 /usr/lib64/libTKXDEIGES.so.7.6.3 /usr/lib64/libTKMeshVS.so.7.6.3 /usr/lib64/libTKRWMesh.so.7.6.3 /usr/lib64/libvtkFiltersVerdict.so.9.2.6 /usr/lib64/libvtkFiltersParallelDIY2.so.9.2.6 /usr/lib64/libvtkInteractionStyle.so.9.2.6 /usr/lib64/libvtkRenderingFreeType.so.9.2.6 /usr/lib64/libvtkRenderingOpenGL2.so.9.2.6 /usr/lib64/libTKFillet.so.7.6.3 /usr/lib64/libTKSTEP.so.7.6.3 /usr/lib64/libTKSTEPAttr.so.7.6.3 /usr/lib64/libTKSTEP209.so.7.6.3 /usr/lib64/libTKSTEPBase.so.7.6.3 /usr/lib64/libTKIGES.so.7.6.3 /usr/lib64/libTKBool.so.7.6.3 /usr/lib64/libTKXSBase.so.7.6.3 /usr/lib64/libTKXCAF.so.7.6.3 /usr/lib64/libTKVCAF.so.7.6.3 /usr/lib64/libTKCAF.so.7.6.3 /usr/lib64/libTKBO.so.7.6.3 /usr/lib64/libTKPrim.so.7.6.3 /usr/lib64/libTKLCAF.so.7.6.3 /usr/lib64/libTKCDF.so.7.6.3 /usr/lib64/libTKV3d.so.7.6.3 /usr/lib64/libTKMesh.so.7.6.3 /usr/lib64/libTKShHealing.so.7.6.3 /usr/lib64/libTKHLR.so.7.6.3 /usr/lib64/libTKTopAlgo.so.7.6.3 /usr/lib64/libTKGeomAlgo.so.7.6.3 /usr/lib64/libTKBRep.so.7.6.3 /usr/lib64/libTKGeomBase.so.7.6.3 /usr/lib64/libTKG3d.so.7.6.3 /usr/lib64/libTKG2d.so.7.6.3 /usr/lib64/libTKService.so.7.6.3 /usr/lib64/libTKMath.so.7.6.3 /usr/lib64/libTKernel.so.7.6.3 -lpthread -lrt -lstdc++ -lfontconfig -lGL /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so -lX11 /usr/lib64/libfreetype.so /usr/lib64/libvtkverdict.so.9.2.6 /usr/lib64/libhdf5.so /usr/lib64/libhdf5_hl.so /usr/lib64/libvtkFiltersParallel.so.9.2.6 /usr/lib64/libvtkFiltersModeling.so.9.2.6 /usr/lib64/libvtkFiltersTexture.so.9.2.6 /usr/lib64/libvtkFiltersExtraction.so.9.2.6 /usr/lib64/libvtkParallelDIY.so.9.2.6 /usr/lib64/libvtkIOXML.so.9.2.6 /usr/lib64/libvtkIOXMLParser.so.9.2.6 /usr/lib64/libvtkParallelCore.so.9.2.6 /usr/lib64/libvtkIOLegacy.so.9.2.6 /usr/lib64/libvtkIOCore.so.9.2.6 /usr/lib64/libfreetype.so /usr/lib64/libvtkRenderingHyperTreeGrid.so.9.2.6 /usr/lib64/libvtkFiltersHybrid.so.9.2.6 /usr/lib64/libvtkRenderingUI.so.9.2.6 /usr/lib64/libvtkRenderingCore.so.9.2.6 /usr/lib64/libvtkFiltersSources.so.9.2.6 /usr/lib64/libvtkFiltersGeneral.so.9.2.6 /usr/lib64/libvtkFiltersGeometry.so.9.2.6 /usr/lib64/libvtkFiltersCore.so.9.2.6 /usr/lib64/libvtkCommonExecutionModel.so.9.2.6 /usr/lib64/libvtkCommonDataModel.so.9.2.6 /usr/lib64/libvtkCommonTransforms.so.9.2.6 /usr/lib64/libvtkCommonMisc.so.9.2.6 /usr/lib64/libvtkCommonMath.so.9.2.6 /usr/lib64/libvtkkissfft.so.9.2.6 /usr/lib64/libGLEW.so /usr/lib64/libX11.so /usr/lib64/libvtkCommonSystem.so.9.2.6 /usr/lib64/libvtkCommonCore.so.9.2.6 /usr/lib64/libvtksys.so.9.2.6 -ldl [ 41%] Building CXX object src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/ScaledIntegerNodeImpl.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/g++ -DCRCPP_BRANCHLESS -DCRCPP_USE_CPP11 -DE57Format_EXPORTS -DE57_DEBUG -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DREVISION_ID=\"E57Format-2.2.1-x86_64-linux-gcc13\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/extern/CRCpp/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/include -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=c++11 -fPIC -MD -MT src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/ScaledIntegerNodeImpl.cpp.o -MF CMakeFiles/E57Format.dir/src/ScaledIntegerNodeImpl.cpp.o.d -o CMakeFiles/E57Format.dir/src/ScaledIntegerNodeImpl.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src/ScaledIntegerNodeImpl.cpp [ 41%] Building CXX object src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/SectionHeaders.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/g++ -DCRCPP_BRANCHLESS -DCRCPP_USE_CPP11 -DE57Format_EXPORTS -DE57_DEBUG -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DREVISION_ID=\"E57Format-2.2.1-x86_64-linux-gcc13\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/extern/CRCpp/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/include -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=c++11 -fPIC -MD -MT src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/SectionHeaders.cpp.o -MF CMakeFiles/E57Format.dir/src/SectionHeaders.cpp.o.d -o CMakeFiles/E57Format.dir/src/SectionHeaders.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src/SectionHeaders.cpp [ 41%] Building CXX object src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/SourceDestBufferImpl.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/g++ -DCRCPP_BRANCHLESS -DCRCPP_USE_CPP11 -DE57Format_EXPORTS -DE57_DEBUG -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DREVISION_ID=\"E57Format-2.2.1-x86_64-linux-gcc13\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/extern/CRCpp/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/include -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=c++11 -fPIC -MD -MT src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/SourceDestBufferImpl.cpp.o -MF CMakeFiles/E57Format.dir/src/SourceDestBufferImpl.cpp.o.d -o CMakeFiles/E57Format.dir/src/SourceDestBufferImpl.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src/SourceDestBufferImpl.cpp [ 41%] Building CXX object src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/StringNodeImpl.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/g++ -DCRCPP_BRANCHLESS -DCRCPP_USE_CPP11 -DE57Format_EXPORTS -DE57_DEBUG -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DREVISION_ID=\"E57Format-2.2.1-x86_64-linux-gcc13\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/extern/CRCpp/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/include -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=c++11 -fPIC -MD -MT src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/StringNodeImpl.cpp.o -MF CMakeFiles/E57Format.dir/src/StringNodeImpl.cpp.o.d -o CMakeFiles/E57Format.dir/src/StringNodeImpl.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src/StringNodeImpl.cpp [ 41%] Building CXX object src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/StructureNodeImpl.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/g++ -DCRCPP_BRANCHLESS -DCRCPP_USE_CPP11 -DE57Format_EXPORTS -DE57_DEBUG -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DREVISION_ID=\"E57Format-2.2.1-x86_64-linux-gcc13\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/extern/CRCpp/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/include -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=c++11 -fPIC -MD -MT src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/StructureNodeImpl.cpp.o -MF CMakeFiles/E57Format.dir/src/StructureNodeImpl.cpp.o.d -o CMakeFiles/E57Format.dir/src/StructureNodeImpl.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src/StructureNodeImpl.cpp [ 41%] Building CXX object src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/VectorNodeImpl.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/g++ -DCRCPP_BRANCHLESS -DCRCPP_USE_CPP11 -DE57Format_EXPORTS -DE57_DEBUG -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DREVISION_ID=\"E57Format-2.2.1-x86_64-linux-gcc13\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/extern/CRCpp/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/include -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=c++11 -fPIC -MD -MT src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/VectorNodeImpl.cpp.o -MF CMakeFiles/E57Format.dir/src/VectorNodeImpl.cpp.o.d -o CMakeFiles/E57Format.dir/src/VectorNodeImpl.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src/VectorNodeImpl.cpp [ 41%] Building CXX object src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/WriterImpl.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/g++ -DCRCPP_BRANCHLESS -DCRCPP_USE_CPP11 -DE57Format_EXPORTS -DE57_DEBUG -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DREVISION_ID=\"E57Format-2.2.1-x86_64-linux-gcc13\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/extern/CRCpp/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/include -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=c++11 -fPIC -MD -MT src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/WriterImpl.cpp.o -MF CMakeFiles/E57Format.dir/src/WriterImpl.cpp.o.d -o CMakeFiles/E57Format.dir/src/WriterImpl.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src/WriterImpl.cpp In function 'getFinitElements', inlined from 'RemoveElement' at /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_Mesh.cpp:3257:26: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_Mesh.cpp:3097:94: warning: argument 1 value '18446744073709551615' exceeds maximum object size 9223372036854775807 [-Walloc-size-larger-than=] 3097 | set *initSet = new set[numberOfSets]; | ^ /usr/include/c++/13/new: In member function 'RemoveElement': /usr/include/c++/13/new:128:26: note: in a call to allocation function 'operator new []' declared here 128 | _GLIBCXX_NODISCARD void* operator new[](std::size_t) _GLIBCXX_THROW (std::bad_alloc) | ^ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/ObjectPool.hxx: In member function 'getNew': /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/ObjectPool.hxx:101:23: warning: argument 1 value '18446744073709551615' exceeds maximum object size 9223372036854775807 [-Walloc-size-larger-than=] 101 | X* newChunk = new X[_chunkSize]; | ^ /usr/include/c++/13/new:128:26: note: in a call to allocation function 'operator new []' declared here 128 | _GLIBCXX_NODISCARD void* operator new[](std::size_t) _GLIBCXX_THROW (std::bad_alloc) | ^ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/ObjectPool.hxx: In member function 'getNew': /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/ObjectPool.hxx:101:23: warning: argument 1 value '18446744073709551615' exceeds maximum object size 9223372036854775807 [-Walloc-size-larger-than=] 101 | X* newChunk = new X[_chunkSize]; | ^ /usr/include/c++/13/new:128:26: note: in a call to allocation function 'operator new []' declared here 128 | _GLIBCXX_NODISCARD void* operator new[](std::size_t) _GLIBCXX_THROW (std::bad_alloc) | ^ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/ObjectPool.hxx: In member function 'getNew': /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/ObjectPool.hxx:101:23: warning: argument 1 value '18446744073709551615' exceeds maximum object size 9223372036854775807 [-Walloc-size-larger-than=] 101 | X* newChunk = new X[_chunkSize]; | ^ /usr/include/c++/13/new:128:26: note: in a call to allocation function 'operator new []' declared here 128 | _GLIBCXX_NODISCARD void* operator new[](std::size_t) _GLIBCXX_THROW (std::bad_alloc) | ^ [ 41%] Building CXX object src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/E57Exception.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/g++ -DCRCPP_BRANCHLESS -DCRCPP_USE_CPP11 -DE57Format_EXPORTS -DE57_DEBUG -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DREVISION_ID=\"E57Format-2.2.1-x86_64-linux-gcc13\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/extern/CRCpp/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/include -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=c++11 -fPIC -MD -MT src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/E57Exception.cpp.o -MF CMakeFiles/E57Format.dir/src/E57Exception.cpp.o.d -o CMakeFiles/E57Format.dir/src/E57Exception.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src/E57Exception.cpp [ 41%] Building CXX object src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/E57Format.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/g++ -DCRCPP_BRANCHLESS -DCRCPP_USE_CPP11 -DE57Format_EXPORTS -DE57_DEBUG -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DREVISION_ID=\"E57Format-2.2.1-x86_64-linux-gcc13\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/extern/CRCpp/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/include -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=c++11 -fPIC -MD -MT src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/E57Format.cpp.o -MF CMakeFiles/E57Format.dir/src/E57Format.cpp.o.d -o CMakeFiles/E57Format.dir/src/E57Format.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src/E57Format.cpp [ 41%] Building CXX object src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/E57SimpleData.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/g++ -DCRCPP_BRANCHLESS -DCRCPP_USE_CPP11 -DE57Format_EXPORTS -DE57_DEBUG -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DREVISION_ID=\"E57Format-2.2.1-x86_64-linux-gcc13\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/extern/CRCpp/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/include -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=c++11 -fPIC -MD -MT src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/E57SimpleData.cpp.o -MF CMakeFiles/E57Format.dir/src/E57SimpleData.cpp.o.d -o CMakeFiles/E57Format.dir/src/E57SimpleData.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src/E57SimpleData.cpp [ 41%] Building CXX object src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/E57SimpleReader.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/g++ -DCRCPP_BRANCHLESS -DCRCPP_USE_CPP11 -DE57Format_EXPORTS -DE57_DEBUG -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DREVISION_ID=\"E57Format-2.2.1-x86_64-linux-gcc13\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/extern/CRCpp/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/include -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=c++11 -fPIC -MD -MT src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/E57SimpleReader.cpp.o -MF CMakeFiles/E57Format.dir/src/E57SimpleReader.cpp.o.d -o CMakeFiles/E57Format.dir/src/E57SimpleReader.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src/E57SimpleReader.cpp [ 41%] Building CXX object src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/E57SimpleWriter.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/g++ -DCRCPP_BRANCHLESS -DCRCPP_USE_CPP11 -DE57Format_EXPORTS -DE57_DEBUG -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DREVISION_ID=\"E57Format-2.2.1-x86_64-linux-gcc13\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/extern/CRCpp/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/include -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=c++11 -fPIC -MD -MT src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/E57SimpleWriter.cpp.o -MF CMakeFiles/E57Format.dir/src/E57SimpleWriter.cpp.o.d -o CMakeFiles/E57Format.dir/src/E57SimpleWriter.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src/E57SimpleWriter.cpp [ 41%] Building CXX object src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/E57XmlParser.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/g++ -DCRCPP_BRANCHLESS -DCRCPP_USE_CPP11 -DE57Format_EXPORTS -DE57_DEBUG -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DREVISION_ID=\"E57Format-2.2.1-x86_64-linux-gcc13\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format/E57Format_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/extern/CRCpp/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/include -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=c++11 -fPIC -MD -MT src/3rdParty/libE57Format/CMakeFiles/E57Format.dir/src/E57XmlParser.cpp.o -MF CMakeFiles/E57Format.dir/src/E57XmlParser.cpp.o.d -o CMakeFiles/E57Format.dir/src/E57XmlParser.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/libE57Format/src/E57XmlParser.cpp In member function 'getNew', inlined from 'AddNodeWithID' at /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_Mesh.cpp:239:46, inlined from 'AddNodeWithID' at /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_Mesh.cpp:228:17: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/ObjectPool.hxx:101:23: warning: argument 1 value '18446744073709551615' exceeds maximum object size 9223372036854775807 [-Walloc-size-larger-than=] 101 | X* newChunk = new X[_chunkSize]; | ^ /usr/include/c++/13/new: In member function 'AddNodeWithID': /usr/include/c++/13/new:128:26: note: in a call to allocation function 'operator new []' declared here 128 | _GLIBCXX_NODISCARD void* operator new[](std::size_t) _GLIBCXX_THROW (std::bad_alloc) | ^ In member function 'getNew', inlined from 'AddBallWithID' at /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS/SMDS_Mesh.cpp:338:46: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/ObjectPool.hxx:101:23: warning: argument 1 value '18446744073709551615' exceeds maximum object size 9223372036854775807 [-Walloc-size-larger-than=] 101 | X* newChunk = new X[_chunkSize]; | ^ /usr/include/c++/13/new: In member function 'AddBallWithID': /usr/include/c++/13/new:128:26: note: in a call to allocation function 'operator new []' declared here 128 | _GLIBCXX_NODISCARD void* operator new[](std::size_t) _GLIBCXX_THROW (std::bad_alloc) | ^ [ 41%] Linking CXX shared library libE57Format.so cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/libE57Format && /usr/bin/cmake -E cmake_link_script CMakeFiles/E57Format.dir/link.txt --verbose=1 /usr/bin/g++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes -shared -Wl,-soname,libE57Format.so -o libE57Format.so CMakeFiles/E57Format.dir/E57Format_autogen/mocs_compilation.cpp.o CMakeFiles/E57Format.dir/src/BlobNodeImpl.cpp.o CMakeFiles/E57Format.dir/src/CheckedFile.cpp.o CMakeFiles/E57Format.dir/src/Common.cpp.o CMakeFiles/E57Format.dir/src/CompressedVectorNodeImpl.cpp.o CMakeFiles/E57Format.dir/src/CompressedVectorReaderImpl.cpp.o CMakeFiles/E57Format.dir/src/CompressedVectorWriterImpl.cpp.o CMakeFiles/E57Format.dir/src/DecodeChannel.cpp.o CMakeFiles/E57Format.dir/src/Decoder.cpp.o CMakeFiles/E57Format.dir/src/Encoder.cpp.o CMakeFiles/E57Format.dir/src/FloatNodeImpl.cpp.o CMakeFiles/E57Format.dir/src/IntegerNodeImpl.cpp.o CMakeFiles/E57Format.dir/src/NodeImpl.cpp.o CMakeFiles/E57Format.dir/src/Packet.cpp.o CMakeFiles/E57Format.dir/src/ImageFileImpl.cpp.o CMakeFiles/E57Format.dir/src/ReaderImpl.cpp.o CMakeFiles/E57Format.dir/src/ScaledIntegerNodeImpl.cpp.o CMakeFiles/E57Format.dir/src/SectionHeaders.cpp.o CMakeFiles/E57Format.dir/src/SourceDestBufferImpl.cpp.o CMakeFiles/E57Format.dir/src/StringNodeImpl.cpp.o CMakeFiles/E57Format.dir/src/StructureNodeImpl.cpp.o CMakeFiles/E57Format.dir/src/VectorNodeImpl.cpp.o CMakeFiles/E57Format.dir/src/WriterImpl.cpp.o CMakeFiles/E57Format.dir/src/E57Exception.cpp.o CMakeFiles/E57Format.dir/src/E57Format.cpp.o CMakeFiles/E57Format.dir/src/E57SimpleData.cpp.o CMakeFiles/E57Format.dir/src/E57SimpleReader.cpp.o CMakeFiles/E57Format.dir/src/E57SimpleWriter.cpp.o CMakeFiles/E57Format.dir/src/E57XmlParser.cpp.o /usr/lib64/libxerces-c.so gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 41%] Built target SMDS /usr/bin/gmake -f src/Base/CMakeFiles/FreeCADBase.dir/build.make src/Base/CMakeFiles/FreeCADBase.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 41%] Building files out of Parameter.xsd cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/python3 /builddir/build/BUILD/FreeCAD-0.20.2/src/Tools/PythonToCPP.py /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/Parameter.xsd Parameter.inl xmlSchemeString cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Base /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/CMakeFiles/FreeCADBase.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Base/CMakeFiles/FreeCADBase.dir/build.make src/Base/CMakeFiles/FreeCADBase.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 41%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/FreeCADBase_autogen/mocs_compilation.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/FreeCADBase_autogen/mocs_compilation.cpp.o -MF CMakeFiles/FreeCADBase.dir/FreeCADBase_autogen/mocs_compilation.cpp.o.d -o CMakeFiles/FreeCADBase.dir/FreeCADBase_autogen/mocs_compilation.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/mocs_compilation.cpp [ 41%] Building C object src/Base/CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxxextensions.c.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/gcc -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxxextensions.c.o -MF CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxxextensions.c.o.d -o CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxxextensions.c.o -c /usr/src/CXX/cxxextensions.c [ 41%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxx_extensions.cxx.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxx_extensions.cxx.o -MF CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxx_extensions.cxx.o.d -o CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxx_extensions.cxx.o -c /usr/src/CXX/cxx_extensions.cxx [ 41%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxxsupport.cxx.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxxsupport.cxx.o -MF CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxxsupport.cxx.o.d -o CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxxsupport.cxx.o -c /usr/src/CXX/cxxsupport.cxx [ 41%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/usr/src/CXX/IndirectPythonInterface.cxx.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/usr/src/CXX/IndirectPythonInterface.cxx.o -MF CMakeFiles/FreeCADBase.dir/usr/src/CXX/IndirectPythonInterface.cxx.o.d -o CMakeFiles/FreeCADBase.dir/usr/src/CXX/IndirectPythonInterface.cxx.o -c /usr/src/CXX/IndirectPythonInterface.cxx [ 41%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxx_exceptions.cxx.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxx_exceptions.cxx.o -MF CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxx_exceptions.cxx.o.d -o CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxx_exceptions.cxx.o -c /usr/src/CXX/cxx_exceptions.cxx [ 41%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Axis.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/Axis.cpp.o -MF CMakeFiles/FreeCADBase.dir/Axis.cpp.o.d -o CMakeFiles/FreeCADBase.dir/Axis.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/Axis.cpp [ 41%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/AxisPyImp.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/AxisPyImp.cpp.o -MF CMakeFiles/FreeCADBase.dir/AxisPyImp.cpp.o.d -o CMakeFiles/FreeCADBase.dir/AxisPyImp.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/AxisPyImp.cpp [ 41%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Base64.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/Base64.cpp.o -MF CMakeFiles/FreeCADBase.dir/Base64.cpp.o.d -o CMakeFiles/FreeCADBase.dir/Base64.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/Base64.cpp [ 41%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/BaseClass.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/BaseClass.cpp.o -MF CMakeFiles/FreeCADBase.dir/BaseClass.cpp.o.d -o CMakeFiles/FreeCADBase.dir/BaseClass.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/BaseClass.cpp [ 41%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/BaseClassPyImp.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/BaseClassPyImp.cpp.o -MF CMakeFiles/FreeCADBase.dir/BaseClassPyImp.cpp.o.d -o CMakeFiles/FreeCADBase.dir/BaseClassPyImp.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/BaseClassPyImp.cpp [ 41%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/BindingManager.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/BindingManager.cpp.o -MF CMakeFiles/FreeCADBase.dir/BindingManager.cpp.o.d -o CMakeFiles/FreeCADBase.dir/BindingManager.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/BindingManager.cpp [ 41%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/BoundBoxPyImp.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/BoundBoxPyImp.cpp.o -MF CMakeFiles/FreeCADBase.dir/BoundBoxPyImp.cpp.o.d -o CMakeFiles/FreeCADBase.dir/BoundBoxPyImp.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/BoundBoxPyImp.cpp [ 41%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Builder3D.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/Builder3D.cpp.o -MF CMakeFiles/FreeCADBase.dir/Builder3D.cpp.o.d -o CMakeFiles/FreeCADBase.dir/Builder3D.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/Builder3D.cpp [ 41%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Console.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/Console.cpp.o -MF CMakeFiles/FreeCADBase.dir/Console.cpp.o.d -o CMakeFiles/FreeCADBase.dir/Console.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/Console.cpp [ 41%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/ConsoleObserver.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/ConsoleObserver.cpp.o -MF CMakeFiles/FreeCADBase.dir/ConsoleObserver.cpp.o.d -o CMakeFiles/FreeCADBase.dir/ConsoleObserver.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/ConsoleObserver.cpp [ 41%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/CoordinateSystem.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/CoordinateSystem.cpp.o -MF CMakeFiles/FreeCADBase.dir/CoordinateSystem.cpp.o.d -o CMakeFiles/FreeCADBase.dir/CoordinateSystem.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/CoordinateSystem.cpp gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 41%] Built target E57Format /usr/bin/gmake -f src/Mod/Path/libarea/CMakeFiles/area-native.dir/build.make src/Mod/Path/libarea/CMakeFiles/area-native.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea/CMakeFiles/area-native.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/Mod/Path/libarea/CMakeFiles/area-native.dir/build.make src/Mod/Path/libarea/CMakeFiles/area-native.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 41%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/area-native_autogen/mocs_compilation.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea && /usr/bin/g++ -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -Darea_native_EXPORTS -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea/area-native_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/usr/include/python3.11 -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -fPIC -std=gnu++17 -fPIC -MD -MT src/Mod/Path/libarea/CMakeFiles/area-native.dir/area-native_autogen/mocs_compilation.cpp.o -MF CMakeFiles/area-native.dir/area-native_autogen/mocs_compilation.cpp.o.d -o CMakeFiles/area-native.dir/area-native_autogen/mocs_compilation.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea/area-native_autogen/mocs_compilation.cpp [ 41%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/Arc.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea && /usr/bin/g++ -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -Darea_native_EXPORTS -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea/area-native_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/usr/include/python3.11 -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -fPIC -std=gnu++17 -fPIC -MD -MT src/Mod/Path/libarea/CMakeFiles/area-native.dir/Arc.cpp.o -MF CMakeFiles/area-native.dir/Arc.cpp.o.d -o CMakeFiles/area-native.dir/Arc.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea/Arc.cpp [ 41%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/Area.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea && /usr/bin/g++ -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -Darea_native_EXPORTS -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea/area-native_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/usr/include/python3.11 -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -fPIC -std=gnu++17 -fPIC -MD -MT src/Mod/Path/libarea/CMakeFiles/area-native.dir/Area.cpp.o -MF CMakeFiles/area-native.dir/Area.cpp.o.d -o CMakeFiles/area-native.dir/Area.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea/Area.cpp [ 42%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/CoordinateSystemPyImp.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/CoordinateSystemPyImp.cpp.o -MF CMakeFiles/FreeCADBase.dir/CoordinateSystemPyImp.cpp.o.d -o CMakeFiles/FreeCADBase.dir/CoordinateSystemPyImp.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/CoordinateSystemPyImp.cpp [ 42%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Debugger.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/Debugger.cpp.o -MF CMakeFiles/FreeCADBase.dir/Debugger.cpp.o.d -o CMakeFiles/FreeCADBase.dir/Debugger.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/Debugger.cpp [ 42%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/AreaDxf.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea && /usr/bin/g++ -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -Darea_native_EXPORTS -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea/area-native_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/usr/include/python3.11 -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -fPIC -std=gnu++17 -fPIC -MD -MT src/Mod/Path/libarea/CMakeFiles/area-native.dir/AreaDxf.cpp.o -MF CMakeFiles/area-native.dir/AreaDxf.cpp.o.d -o CMakeFiles/area-native.dir/AreaDxf.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea/AreaDxf.cpp [ 42%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/DualQuaternion.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/DualQuaternion.cpp.o -MF CMakeFiles/FreeCADBase.dir/DualQuaternion.cpp.o.d -o CMakeFiles/FreeCADBase.dir/DualQuaternion.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/DualQuaternion.cpp [ 42%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/AreaOrderer.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea && /usr/bin/g++ -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -Darea_native_EXPORTS -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea/area-native_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/usr/include/python3.11 -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -fPIC -std=gnu++17 -fPIC -MD -MT src/Mod/Path/libarea/CMakeFiles/area-native.dir/AreaOrderer.cpp.o -MF CMakeFiles/area-native.dir/AreaOrderer.cpp.o.d -o CMakeFiles/area-native.dir/AreaOrderer.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea/AreaOrderer.cpp [ 42%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Exception.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/Exception.cpp.o -MF CMakeFiles/FreeCADBase.dir/Exception.cpp.o.d -o CMakeFiles/FreeCADBase.dir/Exception.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/Exception.cpp [ 42%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/AreaPocket.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea && /usr/bin/g++ -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -Darea_native_EXPORTS -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea/area-native_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/usr/include/python3.11 -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -fPIC -std=gnu++17 -fPIC -MD -MT src/Mod/Path/libarea/CMakeFiles/area-native.dir/AreaPocket.cpp.o -MF CMakeFiles/area-native.dir/AreaPocket.cpp.o.d -o CMakeFiles/area-native.dir/AreaPocket.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea/AreaPocket.cpp [ 42%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/ExceptionFactory.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/ExceptionFactory.cpp.o -MF CMakeFiles/FreeCADBase.dir/ExceptionFactory.cpp.o.d -o CMakeFiles/FreeCADBase.dir/ExceptionFactory.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/ExceptionFactory.cpp [ 42%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/Circle.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea && /usr/bin/g++ -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -Darea_native_EXPORTS -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea/area-native_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/usr/include/python3.11 -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -fPIC -std=gnu++17 -fPIC -MD -MT src/Mod/Path/libarea/CMakeFiles/area-native.dir/Circle.cpp.o -MF CMakeFiles/area-native.dir/Circle.cpp.o.d -o CMakeFiles/area-native.dir/Circle.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea/Circle.cpp [ 42%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Factory.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/Factory.cpp.o -MF CMakeFiles/FreeCADBase.dir/Factory.cpp.o.d -o CMakeFiles/FreeCADBase.dir/Factory.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/Factory.cpp [ 42%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/Curve.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea && /usr/bin/g++ -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -Darea_native_EXPORTS -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea/area-native_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/usr/include/python3.11 -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -fPIC -std=gnu++17 -fPIC -MD -MT src/Mod/Path/libarea/CMakeFiles/area-native.dir/Curve.cpp.o -MF CMakeFiles/area-native.dir/Curve.cpp.o.d -o CMakeFiles/area-native.dir/Curve.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea/Curve.cpp [ 42%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/FileInfo.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/FileInfo.cpp.o -MF CMakeFiles/FreeCADBase.dir/FileInfo.cpp.o.d -o CMakeFiles/FreeCADBase.dir/FileInfo.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/FileInfo.cpp [ 42%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/dxf.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea && /usr/bin/g++ -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -Darea_native_EXPORTS -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea/area-native_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/usr/include/python3.11 -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -fPIC -std=gnu++17 -fPIC -MD -MT src/Mod/Path/libarea/CMakeFiles/area-native.dir/dxf.cpp.o -MF CMakeFiles/area-native.dir/dxf.cpp.o.d -o CMakeFiles/area-native.dir/dxf.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea/dxf.cpp [ 42%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/FileTemplate.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/FileTemplate.cpp.o -MF CMakeFiles/FreeCADBase.dir/FileTemplate.cpp.o.d -o CMakeFiles/FreeCADBase.dir/FileTemplate.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/FileTemplate.cpp [ 42%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/FutureWatcherProgress.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/FutureWatcherProgress.cpp.o -MF CMakeFiles/FreeCADBase.dir/FutureWatcherProgress.cpp.o.d -o CMakeFiles/FreeCADBase.dir/FutureWatcherProgress.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/FutureWatcherProgress.cpp [ 42%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/gzstream.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/gzstream.cpp.o -MF CMakeFiles/FreeCADBase.dir/gzstream.cpp.o.d -o CMakeFiles/FreeCADBase.dir/gzstream.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/gzstream.cpp [ 42%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/kurve/Construction.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea && /usr/bin/g++ -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -Darea_native_EXPORTS -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea/area-native_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/usr/include/python3.11 -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -fPIC -std=gnu++17 -fPIC -MD -MT src/Mod/Path/libarea/CMakeFiles/area-native.dir/kurve/Construction.cpp.o -MF CMakeFiles/area-native.dir/kurve/Construction.cpp.o.d -o CMakeFiles/area-native.dir/kurve/Construction.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea/kurve/Construction.cpp [ 42%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/GeometryPyCXX.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/GeometryPyCXX.cpp.o -MF CMakeFiles/FreeCADBase.dir/GeometryPyCXX.cpp.o.d -o CMakeFiles/FreeCADBase.dir/GeometryPyCXX.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/GeometryPyCXX.cpp [ 42%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/kurve/Finite.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea && /usr/bin/g++ -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -Darea_native_EXPORTS -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea/area-native_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/usr/include/python3.11 -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -fPIC -std=gnu++17 -fPIC -MD -MT src/Mod/Path/libarea/CMakeFiles/area-native.dir/kurve/Finite.cpp.o -MF CMakeFiles/area-native.dir/kurve/Finite.cpp.o.d -o CMakeFiles/area-native.dir/kurve/Finite.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea/kurve/Finite.cpp [ 42%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/kurve/kurve.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea && /usr/bin/g++ -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -Darea_native_EXPORTS -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea/area-native_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/usr/include/python3.11 -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -fPIC -std=gnu++17 -fPIC -MD -MT src/Mod/Path/libarea/CMakeFiles/area-native.dir/kurve/kurve.cpp.o -MF CMakeFiles/area-native.dir/kurve/kurve.cpp.o.d -o CMakeFiles/area-native.dir/kurve/kurve.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea/kurve/kurve.cpp [ 42%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Handle.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/Handle.cpp.o -MF CMakeFiles/FreeCADBase.dir/Handle.cpp.o.d -o CMakeFiles/FreeCADBase.dir/Handle.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/Handle.cpp [ 42%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/InputSource.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/InputSource.cpp.o -MF CMakeFiles/FreeCADBase.dir/InputSource.cpp.o.d -o CMakeFiles/FreeCADBase.dir/InputSource.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/InputSource.cpp [ 42%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/kurve/Matrix.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea && /usr/bin/g++ -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -Darea_native_EXPORTS -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea/area-native_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/usr/include/python3.11 -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -fPIC -std=gnu++17 -fPIC -MD -MT src/Mod/Path/libarea/CMakeFiles/area-native.dir/kurve/Matrix.cpp.o -MF CMakeFiles/area-native.dir/kurve/Matrix.cpp.o.d -o CMakeFiles/area-native.dir/kurve/Matrix.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea/kurve/Matrix.cpp [ 42%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/kurve/offset.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea && /usr/bin/g++ -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -Darea_native_EXPORTS -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea/area-native_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/usr/include/python3.11 -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -fPIC -std=gnu++17 -fPIC -MD -MT src/Mod/Path/libarea/CMakeFiles/area-native.dir/kurve/offset.cpp.o -MF CMakeFiles/area-native.dir/kurve/offset.cpp.o.d -o CMakeFiles/area-native.dir/kurve/offset.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea/kurve/offset.cpp [ 42%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Interpreter.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/Interpreter.cpp.o -MF CMakeFiles/FreeCADBase.dir/Interpreter.cpp.o.d -o CMakeFiles/FreeCADBase.dir/Interpreter.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/Interpreter.cpp [ 42%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/AreaClipper.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea && /usr/bin/g++ -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -Darea_native_EXPORTS -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea/area-native_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/usr/include/python3.11 -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -fPIC -std=gnu++17 -fPIC -MD -MT src/Mod/Path/libarea/CMakeFiles/area-native.dir/AreaClipper.cpp.o -MF CMakeFiles/area-native.dir/AreaClipper.cpp.o.d -o CMakeFiles/area-native.dir/AreaClipper.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea/AreaClipper.cpp [ 42%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/Adaptive.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea && /usr/bin/g++ -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -Darea_native_EXPORTS -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea/area-native_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/usr/include/python3.11 -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -fPIC -std=gnu++17 -fPIC -MD -MT src/Mod/Path/libarea/CMakeFiles/area-native.dir/Adaptive.cpp.o -MF CMakeFiles/area-native.dir/Adaptive.cpp.o.d -o CMakeFiles/area-native.dir/Adaptive.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea/Adaptive.cpp [ 42%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/clipper.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea && /usr/bin/g++ -DHAVE_CONFIG_H -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -Darea_native_EXPORTS -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea/area-native_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/usr/include/python3.11 -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -fPIC -std=gnu++17 -fPIC -MD -MT src/Mod/Path/libarea/CMakeFiles/area-native.dir/clipper.cpp.o -MF CMakeFiles/area-native.dir/clipper.cpp.o.d -o CMakeFiles/area-native.dir/clipper.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Mod/Path/libarea/clipper.cpp [ 42%] Linking CXX shared library ../../../../Mod/Path/libarea-native.so cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Mod/Path/libarea && /usr/bin/cmake -E cmake_link_script CMakeFiles/area-native.dir/link.txt --verbose=1 /usr/bin/g++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -fPIC -Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes -shared -Wl,-soname,libarea-native.so -o ../../../../Mod/Path/libarea-native.so "CMakeFiles/area-native.dir/area-native_autogen/mocs_compilation.cpp.o" "CMakeFiles/area-native.dir/Arc.cpp.o" "CMakeFiles/area-native.dir/Area.cpp.o" "CMakeFiles/area-native.dir/AreaDxf.cpp.o" "CMakeFiles/area-native.dir/AreaOrderer.cpp.o" "CMakeFiles/area-native.dir/AreaPocket.cpp.o" "CMakeFiles/area-native.dir/Circle.cpp.o" "CMakeFiles/area-native.dir/Curve.cpp.o" "CMakeFiles/area-native.dir/dxf.cpp.o" "CMakeFiles/area-native.dir/kurve/Construction.cpp.o" "CMakeFiles/area-native.dir/kurve/Finite.cpp.o" "CMakeFiles/area-native.dir/kurve/kurve.cpp.o" "CMakeFiles/area-native.dir/kurve/Matrix.cpp.o" "CMakeFiles/area-native.dir/kurve/offset.cpp.o" "CMakeFiles/area-native.dir/AreaClipper.cpp.o" "CMakeFiles/area-native.dir/Adaptive.cpp.o" "CMakeFiles/area-native.dir/clipper.cpp.o" [ 42%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Matrix.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/Matrix.cpp.o -MF CMakeFiles/FreeCADBase.dir/Matrix.cpp.o.d -o CMakeFiles/FreeCADBase.dir/Matrix.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/Matrix.cpp [ 42%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/MatrixPyImp.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/MatrixPyImp.cpp.o -MF CMakeFiles/FreeCADBase.dir/MatrixPyImp.cpp.o.d -o CMakeFiles/FreeCADBase.dir/MatrixPyImp.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/MatrixPyImp.cpp /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/MatrixPyImp.cpp: In member function 'Py::Sequence Base::MatrixPy::getA() const': /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/MatrixPyImp.cpp:965:21: warning: redundant move in return statement [-Wredundant-move] 965 | return std::move(tuple); | ~~~~~~~~~^~~~~~~ /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/MatrixPyImp.cpp:965:21: note: remove 'std::move' call [ 42%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/MemDebug.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/MemDebug.cpp.o -MF CMakeFiles/FreeCADBase.dir/MemDebug.cpp.o.d -o CMakeFiles/FreeCADBase.dir/MemDebug.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/MemDebug.cpp [ 42%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Parameter.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/Parameter.cpp.o -MF CMakeFiles/FreeCADBase.dir/Parameter.cpp.o.d -o CMakeFiles/FreeCADBase.dir/Parameter.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/Parameter.cpp [ 42%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/ParameterPy.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/ParameterPy.cpp.o -MF CMakeFiles/FreeCADBase.dir/ParameterPy.cpp.o.d -o CMakeFiles/FreeCADBase.dir/ParameterPy.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/ParameterPy.cpp gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 42%] Built target area-native /usr/bin/gmake -f src/3rdParty/salomesmesh/CMakeFiles/DriverSTL.dir/build.make src/3rdParty/salomesmesh/CMakeFiles/DriverSTL.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh/CMakeFiles/DriverSTL.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/3rdParty/salomesmesh/CMakeFiles/DriverSTL.dir/build.make src/3rdParty/salomesmesh/CMakeFiles/DriverSTL.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 42%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverSTL.dir/src/DriverSTL/Basics_Utils.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DCSFDB -DDIY_NO_THREADS -DDriverSTL_EXPORTS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/DriverSTL.dir/src/DriverSTL/Basics_Utils.cpp.o -MF CMakeFiles/DriverSTL.dir/src/DriverSTL/Basics_Utils.cpp.o.d -o CMakeFiles/DriverSTL.dir/src/DriverSTL/Basics_Utils.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL/Basics_Utils.cpp [ 42%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Persistence.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/Persistence.cpp.o -MF CMakeFiles/FreeCADBase.dir/Persistence.cpp.o.d -o CMakeFiles/FreeCADBase.dir/Persistence.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/Persistence.cpp [ 42%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverSTL.dir/src/DriverSTL/DriverSTL_R_SMDS_Mesh.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DCSFDB -DDIY_NO_THREADS -DDriverSTL_EXPORTS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/DriverSTL.dir/src/DriverSTL/DriverSTL_R_SMDS_Mesh.cpp.o -MF CMakeFiles/DriverSTL.dir/src/DriverSTL/DriverSTL_R_SMDS_Mesh.cpp.o.d -o CMakeFiles/DriverSTL.dir/src/DriverSTL/DriverSTL_R_SMDS_Mesh.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL/DriverSTL_R_SMDS_Mesh.cpp In file included from /usr/include/opencascade/NCollection_IndexedDataMap.hxx:23, from /usr/include/opencascade/Standard_Dump.hxx:17, from /usr/include/opencascade/NCollection_Vec2.hxx:20, from /usr/include/opencascade/NCollection_Vec3.hxx:20, from /usr/include/opencascade/NCollection_Vec4.hxx:18, from /usr/include/opencascade/NCollection_Mat4.hxx:19, from /usr/include/opencascade/gp_Trsf.hxx:21, from /usr/include/opencascade/gp_Pnt.hxx:220, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL/DriverSTL_R_SMDS_Mesh.cpp:27: /usr/include/opencascade/NCollection_StlIterator.hxx:30:15: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 30 | public std::iterator struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:194:16: warning: 'virtual void SMDS_MeshElement::init(int, ShortType, LongType)' was hidden [-Woverloaded-virtual=] 194 | virtual void init(int id = -1, ShortType meshId = -1, LongType shapeId = 0); | ^~~~ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshNode.hxx:67:8: note: by 'void SMDS_MeshNode::init(int, int, int, double, double, double)' 67 | void init(int id, int meshId, int shapeId = -1, double x=0, double y=0, double z=0); | ^~~~ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:194:16: warning: 'virtual void SMDS_MeshElement::init(int, ShortType, LongType)' was hidden [-Woverloaded-virtual=] 194 | virtual void init(int id = -1, ShortType meshId = -1, LongType shapeId = 0); | ^~~~ In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_Mesh.hxx:43: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_VtkEdge.hxx:40:8: note: by 'void SMDS_VtkEdge::init(std::vector&, SMDS_Mesh*)' 40 | void init(std::vector& nodeIds, SMDS_Mesh* mesh); | ^~~~ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:194:16: warning: 'virtual void SMDS_MeshElement::init(int, ShortType, LongType)' was hidden [-Woverloaded-virtual=] 194 | virtual void init(int id = -1, ShortType meshId = -1, LongType shapeId = 0); | ^~~~ In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_Mesh.hxx:44: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_VtkFace.hxx:35:8: note: by 'void SMDS_VtkFace::init(const std::vector&, SMDS_Mesh*)' 35 | void init(const std::vector& nodeIds, SMDS_Mesh* mesh); | ^~~~ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:194:16: warning: 'virtual void SMDS_MeshElement::init(int, ShortType, LongType)' was hidden [-Woverloaded-virtual=] 194 | virtual void init(int id = -1, ShortType meshId = -1, LongType shapeId = 0); | ^~~~ In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_Mesh.hxx:45: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_VtkVolume.hxx:35:8: note: by 'void SMDS_VtkVolume::init(const std::vector&, SMDS_Mesh*)' 35 | void init(const std::vector& nodeIds, SMDS_Mesh* mesh); | ^~~~ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:194:16: warning: 'virtual void SMDS_MeshElement::init(int, ShortType, LongType)' was hidden [-Woverloaded-virtual=] 194 | virtual void init(int id = -1, ShortType meshId = -1, LongType shapeId = 0); | ^~~~ In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_Mesh.hxx:48: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_BallElement.hxx:38:8: note: by 'void SMDS_BallElement::init(vtkIdType, double, SMDS_Mesh*)' 38 | void init(vtkIdType nodeId, double diameter, SMDS_Mesh* mesh); | ^~~~ [ 42%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/PersistencePyImp.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/PersistencePyImp.cpp.o -MF CMakeFiles/FreeCADBase.dir/PersistencePyImp.cpp.o.d -o CMakeFiles/FreeCADBase.dir/PersistencePyImp.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/PersistencePyImp.cpp [ 42%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverSTL.dir/src/DriverSTL/DriverSTL_W_SMDS_Mesh.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DCSFDB -DDIY_NO_THREADS -DDriverSTL_EXPORTS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/DriverSTL.dir/src/DriverSTL/DriverSTL_W_SMDS_Mesh.cpp.o -MF CMakeFiles/DriverSTL.dir/src/DriverSTL/DriverSTL_W_SMDS_Mesh.cpp.o.d -o CMakeFiles/DriverSTL.dir/src/DriverSTL/DriverSTL_W_SMDS_Mesh.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL/DriverSTL_W_SMDS_Mesh.cpp In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshCell.hxx:23, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshFace.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_FaceOfNodes.hxx:30, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL/DriverSTL_W_SMDS_Mesh.cpp:33: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_iterator_base_funcs.h:66, from /usr/include/c++/13/string:47, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESH_ComputeError.hxx:29, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/Driver_Mesh.h:30, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/Driver_SMDS_Mesh.h:26, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/DriverSTL_W_SMDS_Mesh.h:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL/DriverSTL_W_SMDS_Mesh.cpp:23: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ In file included from /usr/include/opencascade/NCollection_Sequence.hxx:20, from /usr/include/opencascade/NCollection_DefineSequence.hxx:24, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESH_TypeDefs.hxx:188, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL/DriverSTL_W_SMDS_Mesh.cpp:42: /usr/include/opencascade/NCollection_StlIterator.hxx:30:15: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 30 | public std::iterator struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_iterator_base_funcs.h:66, from /usr/include/c++/13/string:47, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESH_ComputeError.hxx:29, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/Driver_Mesh.h:30, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/Driver_SMDS_Mesh.h:26, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/DriverDAT_R_SMDS_Mesh.h:28, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT/DriverDAT_R_SMDS_Mesh.cpp:25: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 42%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_R_SMESHDS_Document.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DDriverDAT_EXPORTS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_R_SMESHDS_Document.cpp.o -MF CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_R_SMESHDS_Document.cpp.o.d -o CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_R_SMESHDS_Document.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT/DriverDAT_R_SMESHDS_Document.cpp [ 42%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Reader.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/Reader.cpp.o -MF CMakeFiles/FreeCADBase.dir/Reader.cpp.o.d -o CMakeFiles/FreeCADBase.dir/Reader.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/Reader.cpp [ 42%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_R_SMESHDS_Mesh.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DDriverDAT_EXPORTS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_R_SMESHDS_Mesh.cpp.o -MF CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_R_SMESHDS_Mesh.cpp.o.d -o CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_R_SMESHDS_Mesh.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT/DriverDAT_R_SMESHDS_Mesh.cpp [ 42%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_W_SMDS_Mesh.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DDriverDAT_EXPORTS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_W_SMDS_Mesh.cpp.o -MF CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_W_SMDS_Mesh.cpp.o.d -o CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_W_SMDS_Mesh.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT/DriverDAT_W_SMDS_Mesh.cpp In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshNode.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_Mesh.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT/DriverDAT_W_SMDS_Mesh.cpp:27: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_iterator_base_funcs.h:66, from /usr/include/c++/13/string:47, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESH_ComputeError.hxx:29, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/Driver_Mesh.h:30, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/Driver_SMDS_Mesh.h:26, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/DriverDAT_W_SMDS_Mesh.h:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT/DriverDAT_W_SMDS_Mesh.cpp:25: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 42%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_W_SMESHDS_Document.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DDriverDAT_EXPORTS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_W_SMESHDS_Document.cpp.o -MF CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_W_SMESHDS_Document.cpp.o.d -o CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_W_SMESHDS_Document.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT/DriverDAT_W_SMESHDS_Document.cpp [ 42%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_W_SMESHDS_Mesh.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DCSFDB -DDIY_NO_THREADS -DDriverDAT_EXPORTS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_W_SMESHDS_Mesh.cpp.o -MF CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_W_SMESHDS_Mesh.cpp.o.d -o CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_W_SMESHDS_Mesh.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT/DriverDAT_W_SMESHDS_Mesh.cpp [ 42%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Rotation.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/Rotation.cpp.o -MF CMakeFiles/FreeCADBase.dir/Rotation.cpp.o.d -o CMakeFiles/FreeCADBase.dir/Rotation.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/Rotation.cpp [ 42%] Linking CXX shared library ../../../lib/libDriverDAT.so cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/cmake -E cmake_link_script CMakeFiles/DriverDAT.dir/link.txt --verbose=1 /usr/bin/g++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes -shared -Wl,-soname,libDriverDAT.so -o ../../../lib/libDriverDAT.so CMakeFiles/DriverDAT.dir/src/DriverDAT/DAT_Test.cpp.o CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_R_SMDS_Mesh.cpp.o CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_R_SMESHDS_Document.cpp.o CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_R_SMESHDS_Mesh.cpp.o CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_W_SMDS_Mesh.cpp.o CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_W_SMESHDS_Document.cpp.o CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_W_SMESHDS_Mesh.cpp.o -Wl,-rpath,/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/lib: ../../../lib/libSMDS.so ../../../lib/libDriver.so /usr/lib64/libvtkFiltersVerdict.so.9.2.6 /usr/lib64/libvtkverdict.so.9.2.6 /usr/lib64/libhdf5.so /usr/lib64/libhdf5_hl.so /usr/lib64/libvtkFiltersParallelDIY2.so.9.2.6 /usr/lib64/libvtkFiltersParallel.so.9.2.6 /usr/lib64/libvtkFiltersModeling.so.9.2.6 /usr/lib64/libvtkFiltersTexture.so.9.2.6 /usr/lib64/libvtkInteractionStyle.so.9.2.6 /usr/lib64/libvtkFiltersExtraction.so.9.2.6 /usr/lib64/libvtkParallelDIY.so.9.2.6 /usr/lib64/libvtkIOXML.so.9.2.6 /usr/lib64/libvtkIOXMLParser.so.9.2.6 /usr/lib64/libvtkParallelCore.so.9.2.6 /usr/lib64/libvtkIOLegacy.so.9.2.6 /usr/lib64/libvtkIOCore.so.9.2.6 /usr/lib64/libvtkRenderingFreeType.so.9.2.6 /usr/lib64/libfreetype.so /usr/lib64/libvtkRenderingOpenGL2.so.9.2.6 /usr/lib64/libvtkRenderingHyperTreeGrid.so.9.2.6 /usr/lib64/libvtkFiltersHybrid.so.9.2.6 /usr/lib64/libvtkRenderingUI.so.9.2.6 /usr/lib64/libvtkRenderingCore.so.9.2.6 /usr/lib64/libvtkFiltersSources.so.9.2.6 /usr/lib64/libvtkFiltersGeneral.so.9.2.6 /usr/lib64/libvtkFiltersGeometry.so.9.2.6 /usr/lib64/libvtkFiltersCore.so.9.2.6 /usr/lib64/libvtkCommonExecutionModel.so.9.2.6 /usr/lib64/libvtkCommonDataModel.so.9.2.6 /usr/lib64/libvtkCommonTransforms.so.9.2.6 /usr/lib64/libvtkCommonMisc.so.9.2.6 /usr/lib64/libvtkCommonMath.so.9.2.6 /usr/lib64/libvtkkissfft.so.9.2.6 /usr/lib64/libGLEW.so /usr/lib64/libX11.so /usr/lib64/libvtkCommonSystem.so.9.2.6 /usr/lib64/libvtkCommonCore.so.9.2.6 /usr/lib64/libvtksys.so.9.2.6 /usr/lib64/libTKSTL.so.7.6.3 /usr/lib64/libTKOffset.so.7.6.3 /usr/lib64/libTKFillet.so.7.6.3 /usr/lib64/libTKFeat.so.7.6.3 /usr/lib64/libTKBin.so.7.6.3 /usr/lib64/libTKBinL.so.7.6.3 /usr/lib64/libTKXDESTEP.so.7.6.3 /usr/lib64/libTKSTEP.so.7.6.3 /usr/lib64/libTKSTEPAttr.so.7.6.3 /usr/lib64/libTKSTEP209.so.7.6.3 /usr/lib64/libTKSTEPBase.so.7.6.3 /usr/lib64/libTKXDEIGES.so.7.6.3 /usr/lib64/libTKIGES.so.7.6.3 /usr/lib64/libTKBool.so.7.6.3 /usr/lib64/libTKXSBase.so.7.6.3 /usr/lib64/libTKMeshVS.so.7.6.3 /usr/lib64/libTKRWMesh.so.7.6.3 /usr/lib64/libTKXCAF.so.7.6.3 /usr/lib64/libTKVCAF.so.7.6.3 /usr/lib64/libTKCAF.so.7.6.3 /usr/lib64/libTKBO.so.7.6.3 /usr/lib64/libTKPrim.so.7.6.3 /usr/lib64/libTKLCAF.so.7.6.3 /usr/lib64/libTKCDF.so.7.6.3 /usr/lib64/libTKV3d.so.7.6.3 /usr/lib64/libTKMesh.so.7.6.3 /usr/lib64/libTKShHealing.so.7.6.3 /usr/lib64/libTKHLR.so.7.6.3 /usr/lib64/libTKTopAlgo.so.7.6.3 /usr/lib64/libTKGeomAlgo.so.7.6.3 /usr/lib64/libTKBRep.so.7.6.3 /usr/lib64/libTKGeomBase.so.7.6.3 /usr/lib64/libTKG3d.so.7.6.3 /usr/lib64/libTKG2d.so.7.6.3 /usr/lib64/libTKService.so.7.6.3 /usr/lib64/libTKMath.so.7.6.3 /usr/lib64/libTKernel.so.7.6.3 -lpthread -lrt -lstdc++ -ldl -lfontconfig -lGL /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so -lX11 /usr/lib64/libfreetype.so gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 42%] Built target DriverDAT /usr/bin/gmake -f src/3rdParty/salomesmesh/CMakeFiles/SMESHDS.dir/build.make src/3rdParty/salomesmesh/CMakeFiles/SMESHDS.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh/CMakeFiles/SMESHDS.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/3rdParty/salomesmesh/CMakeFiles/SMESHDS.dir/build.make src/3rdParty/salomesmesh/CMakeFiles/SMESHDS.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 42%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_Command.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESHDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_Command.cpp.o -MF CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_Command.cpp.o.d -o CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_Command.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESHDS/SMESHDS_Command.cpp [ 42%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_Document.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESHDS_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_Document.cpp.o -MF CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_Document.cpp.o.d -o CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_Document.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESHDS/SMESHDS_Document.cpp [ 42%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/RotationPyImp.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/RotationPyImp.cpp.o -MF CMakeFiles/FreeCADBase.dir/RotationPyImp.cpp.o.d -o CMakeFiles/FreeCADBase.dir/RotationPyImp.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/RotationPyImp.cpp In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshNode.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_Mesh.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESHDS_Mesh.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESHDS_Document.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESHDS/SMESHDS_Document.cpp:29: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_ElemIterator.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:34: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ In file included from /usr/include/opencascade/NCollection_IndexedDataMap.hxx:23, from /usr/include/opencascade/Standard_Dump.hxx:17, from /usr/include/opencascade/NCollection_Vec2.hxx:20, from /usr/include/opencascade/NCollection_Vec3.hxx:20, from /usr/include/opencascade/NCollection_Vec4.hxx:18, from /usr/include/opencascade/NCollection_Mat4.hxx:19, from /usr/include/opencascade/gp_Trsf.hxx:21, from /usr/include/opencascade/TopLoc_ItemLocation.hxx:26, from /usr/include/opencascade/TopLoc_Location.lxx:18, from /usr/include/opencascade/TopLoc_Location.hxx:179, from /usr/include/opencascade/TopoDS_Shape.hxx:24, from /usr/include/opencascade/TopTools_IndexedMapOfShape.hxx:20, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESHDS_Mesh.hxx:35: /usr/include/opencascade/NCollection_StlIterator.hxx:30:15: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 30 | public std::iterator struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_iterator_base_funcs.h:66, from /usr/include/c++/13/string:47, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESHDS_Group.hxx:33: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ In file included from /usr/include/opencascade/NCollection_IndexedDataMap.hxx:23, from /usr/include/opencascade/Standard_Dump.hxx:17, from /usr/include/opencascade/NCollection_Vec2.hxx:20, from /usr/include/opencascade/NCollection_Vec3.hxx:20, from /usr/include/opencascade/NCollection_Vec4.hxx:18, from /usr/include/opencascade/Quantity_Color.hxx:27, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESHDS_GroupBase.hxx:37: /usr/include/opencascade/NCollection_StlIterator.hxx:30:15: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 30 | public std::iterator struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_iterator_base_funcs.h:66, from /usr/include/c++/13/string:47, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESHDS_GroupBase.hxx:33: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ In file included from /usr/include/opencascade/NCollection_IndexedDataMap.hxx:23, from /usr/include/opencascade/Standard_Dump.hxx:17, from /usr/include/opencascade/NCollection_Vec2.hxx:20, from /usr/include/opencascade/NCollection_Vec3.hxx:20, from /usr/include/opencascade/NCollection_Vec4.hxx:18, from /usr/include/opencascade/Quantity_Color.hxx:27, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESHDS_GroupBase.hxx:37: /usr/include/opencascade/NCollection_StlIterator.hxx:30:15: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 30 | public std::iterator struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_iterator_base_funcs.h:66, from /usr/include/c++/13/string:47, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESHDS_GroupBase.hxx:33: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 42%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/SmartPtrPy.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/SmartPtrPy.cpp.o -MF CMakeFiles/FreeCADBase.dir/SmartPtrPy.cpp.o.d -o CMakeFiles/FreeCADBase.dir/SmartPtrPy.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/SmartPtrPy.cpp In file included from /usr/include/opencascade/NCollection_IndexedDataMap.hxx:23, from /usr/include/opencascade/Standard_Dump.hxx:17, from /usr/include/opencascade/NCollection_Vec2.hxx:20, from /usr/include/opencascade/NCollection_Vec3.hxx:20, from /usr/include/opencascade/NCollection_Vec4.hxx:18, from /usr/include/opencascade/Quantity_Color.hxx:27, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESHDS_GroupBase.hxx:37: /usr/include/opencascade/NCollection_StlIterator.hxx:30:15: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 30 | public std::iterator struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_iterator_base_funcs.h:66, from /usr/include/c++/13/string:47, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESHDS_GroupBase.hxx:33: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ In file included from /usr/include/opencascade/NCollection_IndexedDataMap.hxx:23, from /usr/include/opencascade/Standard_Dump.hxx:17, from /usr/include/opencascade/NCollection_Vec2.hxx:20, from /usr/include/opencascade/NCollection_Vec3.hxx:20, from /usr/include/opencascade/NCollection_Vec4.hxx:18, from /usr/include/opencascade/Quantity_Color.hxx:27, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESHDS_GroupBase.hxx:37: /usr/include/opencascade/NCollection_StlIterator.hxx:30:15: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 30 | public std::iterator struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_ElemIterator.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:34: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 42%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/TimeInfo.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/TimeInfo.cpp.o -MF CMakeFiles/FreeCADBase.dir/TimeInfo.cpp.o.d -o CMakeFiles/FreeCADBase.dir/TimeInfo.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/TimeInfo.cpp In file included from /usr/include/opencascade/NCollection_IndexedDataMap.hxx:23, from /usr/include/opencascade/Standard_Dump.hxx:17, from /usr/include/opencascade/NCollection_Vec2.hxx:20, from /usr/include/opencascade/NCollection_Vec3.hxx:20, from /usr/include/opencascade/NCollection_Vec4.hxx:18, from /usr/include/opencascade/NCollection_Mat4.hxx:19, from /usr/include/opencascade/gp_Trsf.hxx:21, from /usr/include/opencascade/TopLoc_ItemLocation.hxx:26, from /usr/include/opencascade/TopLoc_Location.lxx:18, from /usr/include/opencascade/TopLoc_Location.hxx:179, from /usr/include/opencascade/TopoDS_Shape.hxx:24, from /usr/include/opencascade/TopTools_IndexedMapOfShape.hxx:20, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESHDS_Mesh.hxx:35: /usr/include/opencascade/NCollection_StlIterator.hxx:30:15: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 30 | public std::iterator struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_ElemIterator.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:34: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 42%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Translate.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base/FreeCADBase_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base -I/builddir/build/BUILD/FreeCAD-0.20.2/src/Base -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/Base/CMakeFiles/FreeCADBase.dir/Translate.cpp.o -MF CMakeFiles/FreeCADBase.dir/Translate.cpp.o.d -o CMakeFiles/FreeCADBase.dir/Translate.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/Base/Translate.cpp In file included from /usr/include/opencascade/NCollection_IndexedDataMap.hxx:23, from /usr/include/opencascade/Standard_Dump.hxx:17, from /usr/include/opencascade/NCollection_Vec2.hxx:20, from /usr/include/opencascade/NCollection_Vec3.hxx:20, from /usr/include/opencascade/NCollection_Vec4.hxx:18, from /usr/include/opencascade/NCollection_Mat4.hxx:19, from /usr/include/opencascade/gp_Trsf.hxx:21, from /usr/include/opencascade/TopLoc_ItemLocation.hxx:26, from /usr/include/opencascade/TopLoc_Location.lxx:18, from /usr/include/opencascade/TopLoc_Location.hxx:179, from /usr/include/opencascade/TopoDS_Shape.hxx:24, from /usr/include/opencascade/TopTools_IndexedMapOfShape.hxx:20, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESHDS_Mesh.hxx:35, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESHDS/SMESHDS_SubMesh.cpp:30: /usr/include/opencascade/NCollection_StlIterator.hxx:30:15: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 30 | public std::iterator struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_iterator_base_funcs.h:66, from /usr/include/c++/13/string:47, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESH_ComputeError.hxx:29, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/Driver_Mesh.h:30, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/Driver_SMDS_Mesh.h:26, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/DriverUNV_R_SMDS_Mesh.h:28, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV/DriverUNV_R_SMDS_Mesh.cpp:23: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 43%] Linking CXX shared library ../../lib/libFreeCADBase.so cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/Base && /usr/bin/cmake -E cmake_link_script CMakeFiles/FreeCADBase.dir/link.txt --verbose=1 /usr/bin/g++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes -shared -Wl,-soname,libFreeCADBase.so -o ../../lib/libFreeCADBase.so CMakeFiles/FreeCADBase.dir/FreeCADBase_autogen/mocs_compilation.cpp.o CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxxextensions.c.o CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxx_extensions.cxx.o CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxxsupport.cxx.o CMakeFiles/FreeCADBase.dir/usr/src/CXX/IndirectPythonInterface.cxx.o CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxx_exceptions.cxx.o CMakeFiles/FreeCADBase.dir/Axis.cpp.o CMakeFiles/FreeCADBase.dir/AxisPyImp.cpp.o CMakeFiles/FreeCADBase.dir/Base64.cpp.o CMakeFiles/FreeCADBase.dir/BaseClass.cpp.o CMakeFiles/FreeCADBase.dir/BaseClassPyImp.cpp.o CMakeFiles/FreeCADBase.dir/BindingManager.cpp.o CMakeFiles/FreeCADBase.dir/BoundBoxPyImp.cpp.o CMakeFiles/FreeCADBase.dir/Builder3D.cpp.o CMakeFiles/FreeCADBase.dir/Console.cpp.o CMakeFiles/FreeCADBase.dir/ConsoleObserver.cpp.o CMakeFiles/FreeCADBase.dir/CoordinateSystem.cpp.o CMakeFiles/FreeCADBase.dir/CoordinateSystemPyImp.cpp.o CMakeFiles/FreeCADBase.dir/Debugger.cpp.o CMakeFiles/FreeCADBase.dir/DualQuaternion.cpp.o CMakeFiles/FreeCADBase.dir/Exception.cpp.o CMakeFiles/FreeCADBase.dir/ExceptionFactory.cpp.o CMakeFiles/FreeCADBase.dir/Factory.cpp.o CMakeFiles/FreeCADBase.dir/FileInfo.cpp.o CMakeFiles/FreeCADBase.dir/FileTemplate.cpp.o CMakeFiles/FreeCADBase.dir/FutureWatcherProgress.cpp.o CMakeFiles/FreeCADBase.dir/gzstream.cpp.o CMakeFiles/FreeCADBase.dir/GeometryPyCXX.cpp.o CMakeFiles/FreeCADBase.dir/Handle.cpp.o CMakeFiles/FreeCADBase.dir/InputSource.cpp.o CMakeFiles/FreeCADBase.dir/Interpreter.cpp.o CMakeFiles/FreeCADBase.dir/Matrix.cpp.o CMakeFiles/FreeCADBase.dir/MatrixPyImp.cpp.o CMakeFiles/FreeCADBase.dir/MemDebug.cpp.o CMakeFiles/FreeCADBase.dir/Parameter.cpp.o CMakeFiles/FreeCADBase.dir/ParameterPy.cpp.o CMakeFiles/FreeCADBase.dir/Persistence.cpp.o CMakeFiles/FreeCADBase.dir/PersistencePyImp.cpp.o CMakeFiles/FreeCADBase.dir/Placement.cpp.o CMakeFiles/FreeCADBase.dir/PlacementPyImp.cpp.o CMakeFiles/FreeCADBase.dir/PyExport.cpp.o CMakeFiles/FreeCADBase.dir/PyObjectBase.cpp.o CMakeFiles/FreeCADBase.dir/Reader.cpp.o CMakeFiles/FreeCADBase.dir/Rotation.cpp.o CMakeFiles/FreeCADBase.dir/RotationPyImp.cpp.o CMakeFiles/FreeCADBase.dir/Sequencer.cpp.o CMakeFiles/FreeCADBase.dir/SmartPtrPy.cpp.o CMakeFiles/FreeCADBase.dir/Stream.cpp.o CMakeFiles/FreeCADBase.dir/Swap.cpp.o CMakeFiles/FreeCADBase.dir/swigpyrun.cpp.o CMakeFiles/FreeCADBase.dir/TimeInfo.cpp.o CMakeFiles/FreeCADBase.dir/Tools.cpp.o CMakeFiles/FreeCADBase.dir/Tools2D.cpp.o CMakeFiles/FreeCADBase.dir/Translate.cpp.o CMakeFiles/FreeCADBase.dir/Type.cpp.o CMakeFiles/FreeCADBase.dir/TypePyImp.cpp.o CMakeFiles/FreeCADBase.dir/Uuid.cpp.o CMakeFiles/FreeCADBase.dir/Vector3D.cpp.o CMakeFiles/FreeCADBase.dir/VectorPyImp.cpp.o CMakeFiles/FreeCADBase.dir/ViewProj.cpp.o CMakeFiles/FreeCADBase.dir/Writer.cpp.o CMakeFiles/FreeCADBase.dir/XMLTools.cpp.o CMakeFiles/FreeCADBase.dir/UnitsApi.cpp.o CMakeFiles/FreeCADBase.dir/UnitsApiPy.cpp.o CMakeFiles/FreeCADBase.dir/UnitsSchema.cpp.o CMakeFiles/FreeCADBase.dir/UnitsSchemaInternal.cpp.o CMakeFiles/FreeCADBase.dir/UnitsSchemaMKS.cpp.o CMakeFiles/FreeCADBase.dir/UnitsSchemaImperial1.cpp.o CMakeFiles/FreeCADBase.dir/UnitsSchemaCentimeters.cpp.o CMakeFiles/FreeCADBase.dir/UnitsSchemaMmMin.cpp.o CMakeFiles/FreeCADBase.dir/UnitsSchemaFemMilliMeterNewton.cpp.o CMakeFiles/FreeCADBase.dir/Quantity.cpp.o CMakeFiles/FreeCADBase.dir/QuantityPyImp.cpp.o CMakeFiles/FreeCADBase.dir/Unit.cpp.o CMakeFiles/FreeCADBase.dir/UnitPyImp.cpp.o CMakeFiles/FreeCADBase.dir/PyTools.c.o CMakeFiles/FreeCADBase.dir/PreCompiled.cpp.o /usr/lib64/libxerces-c.so /usr/lib64/libboost_filesystem.so.1.81.0 /usr/lib64/libboost_program_options.so.1.81.0 /usr/lib64/libboost_regex.so.1.81.0 /usr/lib64/libboost_system.so.1.81.0 /usr/lib64/libboost_thread.so.1.81.0 /usr/lib64/libboost_date_time.so.1.81.0 -lpthread /usr/lib64/libz.so /usr/lib64/libQt5Core.so.5.15.8 /usr/lib64/libpython3.11.so -lutil -ldl /usr/lib64/libzipios.so /usr/lib64/libboost_atomic.so.1.81.0 [ 43%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverUNV.dir/src/DriverUNV/DriverUNV_R_SMESHDS_Document.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DCSFDB -DDIY_NO_THREADS -DDriverUNV_EXPORTS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/DriverUNV.dir/src/DriverUNV/DriverUNV_R_SMESHDS_Document.cpp.o -MF CMakeFiles/DriverUNV.dir/src/DriverUNV/DriverUNV_R_SMESHDS_Document.cpp.o.d -o CMakeFiles/DriverUNV.dir/src/DriverUNV/DriverUNV_R_SMESHDS_Document.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV/DriverUNV_R_SMESHDS_Document.cpp [ 43%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverUNV.dir/src/DriverUNV/DriverUNV_R_SMESHDS_Mesh.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DCSFDB -DDIY_NO_THREADS -DDriverUNV_EXPORTS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/DriverUNV.dir/src/DriverUNV/DriverUNV_R_SMESHDS_Mesh.cpp.o -MF CMakeFiles/DriverUNV.dir/src/DriverUNV/DriverUNV_R_SMESHDS_Mesh.cpp.o.d -o CMakeFiles/DriverUNV.dir/src/DriverUNV/DriverUNV_R_SMESHDS_Mesh.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV/DriverUNV_R_SMESHDS_Mesh.cpp [ 43%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverUNV.dir/src/DriverUNV/DriverUNV_W_SMDS_Mesh.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DCSFDB -DDIY_NO_THREADS -DDriverUNV_EXPORTS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/DriverUNV.dir/src/DriverUNV/DriverUNV_W_SMDS_Mesh.cpp.o -MF CMakeFiles/DriverUNV.dir/src/DriverUNV/DriverUNV_W_SMDS_Mesh.cpp.o.d -o CMakeFiles/DriverUNV.dir/src/DriverUNV/DriverUNV_W_SMDS_Mesh.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV/DriverUNV_W_SMDS_Mesh.cpp In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESHDS_GroupBase.hxx:35, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/DriverUNV_W_SMDS_Mesh.h:29, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV/DriverUNV_W_SMDS_Mesh.cpp:25: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_algobase.h:65, from /usr/include/c++/13/algorithm:60, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV/DriverUNV_W_SMDS_Mesh.cpp:23: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ In file included from /usr/include/opencascade/NCollection_IndexedDataMap.hxx:23, from /usr/include/opencascade/Standard_Dump.hxx:17, from /usr/include/opencascade/NCollection_Vec2.hxx:20, from /usr/include/opencascade/NCollection_Vec3.hxx:20, from /usr/include/opencascade/NCollection_Vec4.hxx:18, from /usr/include/opencascade/Quantity_Color.hxx:27, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESHDS_GroupBase.hxx:37: /usr/include/opencascade/NCollection_StlIterator.hxx:30:15: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 30 | public std::iterator struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_algobase.h:65, from /usr/include/c++/13/vector:62, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/UNV2411_Structure.hxx:28, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV/UNV_Test.cpp:22: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ In file included from /usr/include/opencascade/NCollection_IndexedDataMap.hxx:23, from /usr/include/opencascade/Standard_Dump.hxx:17, from /usr/include/opencascade/NCollection_Vec2.hxx:20, from /usr/include/opencascade/NCollection_Vec3.hxx:20, from /usr/include/opencascade/NCollection_Vec4.hxx:18, from /usr/include/opencascade/Quantity_Color.hxx:27, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESHDS_GroupBase.hxx:37: /usr/include/opencascade/NCollection_StlIterator.hxx:30:15: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 30 | public std::iterator struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESH_Controls.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESH_ControlsDef.hxx:26: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 43%] Built target area /usr/bin/gmake -f src/App/CMakeFiles/FreeCADApp_autogen.dir/build.make src/App/CMakeFiles/FreeCADApp_autogen.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/App /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App/CMakeFiles/FreeCADApp_autogen.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/App/CMakeFiles/FreeCADApp_autogen.dir/build.make src/App/CMakeFiles/FreeCADApp_autogen.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 43%] Automatic MOC for target FreeCADApp cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App && /usr/bin/cmake -E cmake_autogen /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App/CMakeFiles/FreeCADApp_autogen.dir/AutogenInfo.json "" AutoGen: Refreshing parse cache because it doesn't exist. AutoMoc: Generating "SRC:/redhat-linux-build/src/App/FreeCADApp_autogen/moc_predefs.h", because it doesn't exist. /usr/bin/g++ -dM -E -c /usr/share/cmake/Modules/CMakeCXXCompilerABI.cpp -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB "-DDOCDIR=\"/usr/share/doc/freecad\"" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H "-DLIBRARYDIR=\"lib64\"" -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB "-DRESOURCEDIR=\"/usr/share/freecad\"" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App -I/usr/include/python3.11 -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/lib64/qt5/mkspecs/linux-g++ -I/usr/include/qt5/QtXml -I/usr/include -I/usr/include/c++/13 -I/usr/include/c++/13/x86_64-redhat-linux -I/usr/include/c++/13/backward -I/usr/lib/gcc/x86_64-redhat-linux/13/include -I/usr/local/include AutoGen: Parsing "SRC:/src/App/Annotation.h" AutoGen: Parsing "SRC:/src/App/AutoTransaction.h" AutoGen: Parsing "SRC:/src/App/Branding.h" AutoGen: Parsing "SRC:/src/App/Application.h" AutoGen: Parsing "SRC:/src/App/ColorModel.h" AutoGen: Parsing "SRC:/src/App/ComplexGeoData.h" AutoGen: Parsing "SRC:/src/App/Document.h" AutoGen: Parsing "SRC:/src/App/DocumentObject.h" AutoGen: Parsing "SRC:/src/App/DocumentObjectExtension.h" AutoGen: Parsing "SRC:/src/App/DocumentObjectFileIncluded.h" AutoGen: Parsing "SRC:/src/App/DocumentObserver.h" AutoGen: Parsing "SRC:/src/App/DocumentObjectGroup.h" AutoGen: Parsing "SRC:/src/App/DocumentObserverPython.h" AutoGen: Parsing "SRC:/src/App/DynamicProperty.h" AutoGen: Parsing "SRC:/src/App/Enumeration.h" AutoGen: Parsing "SRC:/src/App/Expression.h" AutoGen: Parsing "SRC:/src/App/ExpressionParser.h" AutoGen: Parsing "SRC:/src/App/ExpressionVisitors.h" AutoGen: Parsing "SRC:/src/App/Extension.h" AutoGen: Parsing "SRC:/src/App/ExtensionContainer.h" AutoGen: Parsing "SRC:/src/App/FeatureCustom.h" AutoGen: Parsing "SRC:/src/App/FeaturePython.h" AutoGen: Parsing "SRC:/src/App/FeaturePythonPyImp.h" AutoGen: Parsing "SRC:/src/App/FeatureTest.h" AutoGen: Parsing "SRC:/src/App/GeoFeature.h" AutoGen: Parsing "SRC:/src/App/GeoFeatureGroupExtension.h" AutoGen: Parsing "SRC:/src/App/GroupExtension.h" AutoGen: Parsing "SRC:/src/App/InventorObject.h" AutoGen: Parsing "SRC:/src/App/Link.h" AutoGen: Parsing "SRC:/src/App/Material.h" AutoGen: Parsing "SRC:/src/App/MaterialObject.h" AutoGen: Parsing "SRC:/src/App/MeasureDistance.h" AutoGen: Parsing "SRC:/src/App/MergeDocuments.h" AutoGen: Parsing "SRC:/src/App/Metadata.h" AutoGen: Parsing "SRC:/src/App/ObjectIdentifier.h" AutoGen: Parsing "SRC:/src/App/Origin.h" AutoGen: Parsing "SRC:/src/App/OriginFeature.h" AutoGen: Parsing "SRC:/src/App/OriginGroupExtension.h" AutoGen: Parsing "SRC:/src/App/Part.h" AutoGen: Parsing "SRC:/src/App/Path.h" AutoGen: Parsing "SRC:/src/App/Placement.h" AutoGen: Parsing "SRC:/src/App/Property.h" AutoGen: Parsing "SRC:/src/App/PreCompiled.h" AutoGen: Parsing "SRC:/src/App/PropertyContainer.h" AutoGen: Parsing "SRC:/src/App/PropertyExpressionEngine.h" AutoGen: Parsing "SRC:/src/App/PropertyFile.h" AutoGen: Parsing "SRC:/src/App/PropertyGeo.h" AutoGen: Parsing "SRC:/src/App/PropertyLinks.h" AutoGen: Parsing "SRC:/src/App/PropertyPythonObject.h" AutoGen: Parsing "SRC:/src/App/PropertyStandard.h" AutoGen: Parsing "SRC:/src/App/PropertyUnits.h" AutoGen: Parsing "SRC:/src/App/Range.h" AutoGen: Parsing "SRC:/src/App/TextDocument.h" AutoGen: Parsing "SRC:/src/App/TransactionalObject.h" AutoGen: Parsing "SRC:/src/App/Transactions.h" AutoGen: Parsing "SRC:/src/App/VRMLObject.h" AutoGen: Parsing "SRC:/src/App/Annotation.cpp" AutoGen: Parsing "SRC:/src/App/ApplicationPy.cpp" AutoGen: Parsing "SRC:/src/App/Application.cpp" AutoGen: Parsing "SRC:/src/App/AutoTransaction.cpp" AutoGen: Parsing "SRC:/src/App/Branding.cpp" AutoGen: Parsing "SRC:/src/App/ColorModel.cpp" AutoGen: Parsing "SRC:/src/App/ComplexGeoData.cpp" AutoGen: Parsing "SRC:/src/App/ComplexGeoDataPyImp.cpp" AutoGen: Parsing "SRC:/src/App/Document.cpp" AutoGen: Parsing "SRC:/src/App/DocumentObject.cpp" AutoGen: Parsing "SRC:/src/App/DocumentObjectExtension.cpp" AutoGen: Parsing "SRC:/src/App/DocumentObjectExtensionPyImp.cpp" AutoGen: Parsing "SRC:/src/App/DocumentObjectFileIncluded.cpp" AutoGen: Parsing "SRC:/src/App/DocumentObjectGroup.cpp" AutoGen: Parsing "SRC:/src/App/DocumentObjectGroupPyImp.cpp" AutoGen: Parsing "SRC:/src/App/DocumentObjectPyImp.cpp" AutoGen: Parsing "SRC:/src/App/DocumentObserver.cpp" AutoGen: Parsing "SRC:/src/App/DocumentObserverPython.cpp" AutoGen: Parsing "SRC:/src/App/DocumentPyImp.cpp" AutoGen: Parsing "SRC:/src/App/DynamicProperty.cpp" AutoGen: Parsing "SRC:/src/App/Enumeration.cpp" AutoGen: Parsing "SRC:/src/App/Extension.cpp" AutoGen: Parsing "SRC:/src/App/ExtensionContainer.cpp" AutoGen: Parsing "SRC:/src/App/Expression.cpp" AutoGen: Parsing "SRC:/src/App/ExtensionContainerPyImp.cpp" AutoGen: Parsing "SRC:/src/App/ExtensionPyImp.cpp" AutoGen: Parsing "SRC:/src/App/FeaturePython.cpp" AutoGen: Parsing "SRC:/src/App/FeatureTest.cpp" AutoGen: Parsing "SRC:/src/App/GeoFeature.cpp" AutoGen: Parsing "SRC:/src/App/GeoFeatureGroupExtension.cpp" AutoGen: Parsing "SRC:/src/App/GeoFeatureGroupExtensionPyImp.cpp" AutoGen: Parsing "SRC:/src/App/GeoFeaturePyImp.cpp" AutoGen: Parsing "SRC:/src/App/GroupExtension.cpp" AutoGen: Parsing "SRC:/src/App/GroupExtensionPyImp.cpp" AutoGen: Parsing "SRC:/src/App/InventorObject.cpp" AutoGen: Parsing "SRC:/src/App/Link.cpp" AutoGen: Parsing "SRC:/src/App/LinkBaseExtensionPyImp.cpp" AutoGen: Parsing "SRC:/src/App/Material.cpp" AutoGen: Parsing "SRC:/src/App/MaterialObject.cpp" AutoGen: Parsing "SRC:/src/App/MaterialPyImp.cpp" AutoGen: Parsing "SRC:/src/App/MeasureDistance.cpp" AutoGen: Parsing "SRC:/src/App/Metadata.cpp" AutoGen: Parsing "SRC:/src/App/MergeDocuments.cpp" AutoGen: Parsing "SRC:/src/App/MetadataPyImp.cpp" AutoGen: Parsing "SRC:/src/App/ObjectIdentifier.cpp" AutoGen: Parsing "SRC:/src/App/Origin.cpp" AutoGen: Parsing "SRC:/src/App/OriginFeature.cpp" AutoGen: Parsing "SRC:/src/App/OriginGroupExtension.cpp" AutoGen: Parsing "SRC:/src/App/OriginGroupExtensionPyImp.cpp" AutoGen: Parsing "SRC:/src/App/Part.cpp" AutoGen: Parsing "SRC:/src/App/PartPyImp.cpp" AutoGen: Parsing "SRC:/src/App/Path.cpp" AutoGen: Parsing "SRC:/src/App/Placement.cpp" AutoGen: Parsing "SRC:/src/App/PreCompiled.cpp" AutoGen: Parsing "SRC:/src/App/PropertyContainer.cpp" AutoGen: Parsing "SRC:/src/App/Property.cpp" AutoGen: Parsing "SRC:/src/App/PropertyContainerPyImp.cpp" AutoGen: Parsing "SRC:/src/App/PropertyExpressionEngine.cpp" AutoGen: Parsing "SRC:/src/App/PropertyFile.cpp" AutoGen: Parsing "SRC:/src/App/PropertyGeo.cpp" AutoGen: Parsing "SRC:/src/App/PropertyLinks.cpp" AutoGen: Parsing "SRC:/src/App/PropertyPythonObject.cpp" AutoGen: Parsing "SRC:/src/App/PropertyStandard.cpp" AutoGen: Parsing "SRC:/src/App/PropertyUnits.cpp" AutoGen: Parsing "SRC:/src/App/Range.cpp" AutoGen: Parsing "SRC:/src/App/TextDocument.cpp" AutoGen: Parsing "SRC:/src/App/TransactionalObject.cpp" AutoGen: Parsing "SRC:/src/App/Transactions.cpp" AutoGen: Parsing "SRC:/src/App/VRMLObject.cpp" AutoMoc: Generating MOC compilation "SRC:/redhat-linux-build/src/App/FreeCADApp_autogen/mocs_compilation.cpp" AutoGen: Writing the parse cache file "SRC:/redhat-linux-build/src/App/CMakeFiles/FreeCADApp_autogen.dir/ParseCache.txt" AutoGen: Writing the settings file "SRC:/redhat-linux-build/src/App/CMakeFiles/FreeCADApp_autogen.dir/AutogenUsed.txt" gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 43%] Built target FreeCADApp_autogen /usr/bin/gmake -f src/App/CMakeFiles/FreeCADApp.dir/build.make src/App/CMakeFiles/FreeCADApp.dir/depend gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 43%] Building files out of FreeCADTest.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App && /usr/bin/python3 /builddir/build/BUILD/FreeCAD-0.20.2/src/Tools/PythonToCPP.py /builddir/build/BUILD/FreeCAD-0.20.2/src/App/FreeCADTest.py TestScript.h [ 43%] Building files out of FreeCADInit.py cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App && /usr/bin/python3 /builddir/build/BUILD/FreeCAD-0.20.2/src/Tools/PythonToCPP.py /builddir/build/BUILD/FreeCAD-0.20.2/src/App/FreeCADInit.py InitScript.h cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /builddir/build/BUILD/FreeCAD-0.20.2 /builddir/build/BUILD/FreeCAD-0.20.2/src/App /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App/CMakeFiles/FreeCADApp.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' /usr/bin/gmake -f src/App/CMakeFiles/FreeCADApp.dir/build.make src/App/CMakeFiles/FreeCADApp.dir/build gmake[2]: Entering directory '/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build' [ 43%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/FreeCADApp_autogen/mocs_compilation.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DLIBRARYDIR=\"lib64\" -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App/FreeCADApp_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/App/CMakeFiles/FreeCADApp.dir/FreeCADApp_autogen/mocs_compilation.cpp.o -MF CMakeFiles/FreeCADApp.dir/FreeCADApp_autogen/mocs_compilation.cpp.o.d -o CMakeFiles/FreeCADApp.dir/FreeCADApp_autogen/mocs_compilation.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App/FreeCADApp_autogen/mocs_compilation.cpp [ 43%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/Annotation.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DLIBRARYDIR=\"lib64\" -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App/FreeCADApp_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/App/CMakeFiles/FreeCADApp.dir/Annotation.cpp.o -MF CMakeFiles/FreeCADApp.dir/Annotation.cpp.o.d -o CMakeFiles/FreeCADApp.dir/Annotation.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/App/Annotation.cpp In file included from /usr/include/opencascade/NCollection_Sequence.hxx:20, from /usr/include/opencascade/NCollection_DefineSequence.hxx:24, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESH_TypeDefs.hxx:188, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESH_ControlsDef.hxx:29: /usr/include/opencascade/NCollection_StlIterator.hxx:30:15: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 30 | public std::iterator struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_iterator_base_funcs.h:66, from /usr/include/c++/13/string:47, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESH_ComputeError.hxx:29, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/Driver_Mesh.h:30, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/Driver_SMESHDS_Mesh.h:26, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/DriverGMF_Read.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESH/DriverGMF_Read.cpp:26: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ In file included from /usr/include/opencascade/NCollection_IndexedDataMap.hxx:23, from /usr/include/opencascade/Standard_Dump.hxx:17, from /usr/include/opencascade/NCollection_Vec2.hxx:20, from /usr/include/opencascade/NCollection_Vec3.hxx:20, from /usr/include/opencascade/NCollection_Vec4.hxx:18, from /usr/include/opencascade/Quantity_Color.hxx:27, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESHDS_GroupBase.hxx:37: /usr/include/opencascade/NCollection_StlIterator.hxx:30:15: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 30 | public std::iterator struct std::iterator' is deprecated [-Wdeprecated-declarations] 30 | public std::iterator struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 43%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/DriverMED_Family.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/DriverMED_Family.cpp.o -MF CMakeFiles/SMESH.dir/src/SMESH/DriverMED_Family.cpp.o.d -o CMakeFiles/SMESH.dir/src/SMESH/DriverMED_Family.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESH/DriverMED_Family.cpp In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshNode.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_Mesh.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/DriverMED_Family.h:34, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESH/DriverMED_Family.cpp:28: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/DriverMED.hxx:28, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/DriverMED_Family.h:32: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ In file included from /usr/include/opencascade/NCollection_IndexedDataMap.hxx:23, from /usr/include/opencascade/Standard_Dump.hxx:17, from /usr/include/opencascade/NCollection_Vec2.hxx:20, from /usr/include/opencascade/NCollection_Vec3.hxx:20, from /usr/include/opencascade/NCollection_Vec4.hxx:18, from /usr/include/opencascade/Quantity_Color.hxx:27, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESHDS_GroupBase.hxx:37, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/DriverMED_Family.h:35: /usr/include/opencascade/NCollection_StlIterator.hxx:30:15: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 30 | public std::iterator struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/DriverMED.hxx:28, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/DriverMED_R_SMESHDS_Mesh.h:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESH/DriverMED_R_SMESHDS_Mesh.cpp:27: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ In file included from /usr/include/opencascade/NCollection_IndexedDataMap.hxx:23, from /usr/include/opencascade/Standard_Dump.hxx:17, from /usr/include/opencascade/NCollection_Vec2.hxx:20, from /usr/include/opencascade/NCollection_Vec3.hxx:20, from /usr/include/opencascade/NCollection_Vec4.hxx:18, from /usr/include/opencascade/Quantity_Color.hxx:27, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESHDS_GroupBase.hxx:37, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/DriverMED_Family.h:35: /usr/include/opencascade/NCollection_StlIterator.hxx:30:15: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 30 | public std::iterator struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_iterator_base_funcs.h:66, from /usr/include/c++/13/string:47, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESH_ComputeError.hxx:29, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/Driver_Mesh.h:30, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/Driver_SMESHDS_Mesh.h:26, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/DriverMED_W_Field.h:31, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESH/DriverMED_W_Field.cpp:27: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:194:16: warning: 'virtual void SMDS_MeshElement::init(int, ShortType, LongType)' was hidden [-Woverloaded-virtual=] 194 | virtual void init(int id = -1, ShortType meshId = -1, LongType shapeId = 0); | ^~~~ In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_Mesh.hxx:43, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESHDS_Mesh.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESH/DriverMED_W_Field.cpp:38: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_VtkEdge.hxx:40:8: note: by 'void SMDS_VtkEdge::init(std::vector&, SMDS_Mesh*)' 40 | void init(std::vector& nodeIds, SMDS_Mesh* mesh); | ^~~~ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:194:16: warning: 'virtual void SMDS_MeshElement::init(int, ShortType, LongType)' was hidden [-Woverloaded-virtual=] 194 | virtual void init(int id = -1, ShortType meshId = -1, LongType shapeId = 0); | ^~~~ In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_Mesh.hxx:44: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_VtkFace.hxx:35:8: note: by 'void SMDS_VtkFace::init(const std::vector&, SMDS_Mesh*)' 35 | void init(const std::vector& nodeIds, SMDS_Mesh* mesh); | ^~~~ In file included from /usr/include/opencascade/NCollection_IndexedDataMap.hxx:23, from /usr/include/opencascade/Standard_Dump.hxx:17, from /usr/include/opencascade/NCollection_Vec2.hxx:20, from /usr/include/opencascade/NCollection_Vec3.hxx:20, from /usr/include/opencascade/NCollection_Vec4.hxx:18, from /usr/include/opencascade/NCollection_Mat4.hxx:19, from /usr/include/opencascade/gp_Trsf.hxx:21, from /usr/include/opencascade/TopLoc_ItemLocation.hxx:26, from /usr/include/opencascade/TopLoc_Location.lxx:18, from /usr/include/opencascade/TopLoc_Location.hxx:179, from /usr/include/opencascade/TopoDS_Shape.hxx:24, from /usr/include/opencascade/TopTools_IndexedMapOfShape.hxx:20, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESHDS_Mesh.hxx:35: /usr/include/opencascade/NCollection_StlIterator.hxx:30:15: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 30 | public std::iterator struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_iterator_base_funcs.h:66, from /usr/include/c++/13/string:47, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESH_ComputeError.hxx:29, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/Driver_Mesh.h:30, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/Driver_SMESHDS_Mesh.h:26, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/DriverMED_W_SMESHDS_Mesh.h:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESH/DriverMED_W_SMESHDS_Mesh.cpp:28: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ In file included from /usr/include/opencascade/NCollection_IndexedDataMap.hxx:23, from /usr/include/opencascade/Standard_Dump.hxx:17, from /usr/include/opencascade/NCollection_Vec2.hxx:20, from /usr/include/opencascade/NCollection_Vec3.hxx:20, from /usr/include/opencascade/NCollection_Vec4.hxx:18, from /usr/include/opencascade/Quantity_Color.hxx:27, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESHDS_GroupBase.hxx:37, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/DriverMED_Family.h:35: /usr/include/opencascade/NCollection_StlIterator.hxx:30:15: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 30 | public std::iterator struct std::iterator' is deprecated [-Wdeprecated-declarations] 30 | public std::iterator >::operator[](unsigned long) const', inlined from 'boost::subgraph, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> >, boost::property, std::allocator >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > >, boost::listS> >::local_to_global(unsigned long) const' at /usr/include/boost/graph/subgraph.hpp:205:53, inlined from 'boost::subgraph, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> >, boost::property, std::allocator >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > >, boost::listS> >::local_to_global(unsigned long) const' at /usr/include/boost/graph/subgraph.hpp:203:23, inlined from 'boost::detail::write_graphviz_subgraph, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> >, boost::property, std::allocator >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > >, boost::listS>, std::_Bit_iterator, boost::subgraph_local_property_map, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> >, boost::property, std::allocator >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > >, boost::listS> > const*, boost::vec_adj_list_vertex_id_map, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, unsigned long>, boost::vertex_index_t> >(std::basic_ostream >&, boost::subgraph, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> >, boost::property, std::allocator >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > >, boost::listS> > const&, std::_Bit_iterator, std::_Bit_iterator, boost::subgraph_local_property_map, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> >, boost::property, std::allocator >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > >, boost::listS> > const*, boost::vec_adj_list_vertex_id_map, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, unsigned long>, boost::vertex_index_t>)void [clone .isra.0]' at /usr/include/boost/graph/graphviz.hpp:388:41: /usr/include/c++/13/bits/stl_vector.h:1142:9: warning: 'MEM[(const struct out_edge_iter *)&ei + 32B].m_src' may be used uninitialized [-Wmaybe-uninitialized] 1142 | __glibcxx_requires_subscript(__n); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/App/Document.cpp:67: /usr/include/boost/graph/graphviz.hpp: In function 'boost::detail::write_graphviz_subgraph, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> >, boost::property, std::allocator >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > >, boost::listS>, std::_Bit_iterator, boost::subgraph_local_property_map, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> >, boost::property, std::allocator >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > >, boost::listS> > const*, boost::vec_adj_list_vertex_id_map, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, unsigned long>, boost::vertex_index_t> >(std::basic_ostream >&, boost::subgraph, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> >, boost::property, std::allocator >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > >, boost::listS> > const&, std::_Bit_iterator, std::_Bit_iterator, boost::subgraph_local_property_map, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> >, boost::property, std::allocator >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > >, boost::listS> > const*, boost::vec_adj_list_vertex_id_map, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, unsigned long>, boost::vertex_index_t>)void [clone .isra.0]': /usr/include/boost/graph/graphviz.hpp:371:55: note: 'MEM[(const struct out_edge_iter *)&ei + 32B].m_src' was declared here 371 | typename graph_traits< Graph >::edge_iterator ei, edge_end; | ^~ In file included from /usr/include/boost/graph/detail/adjacency_list.hpp:35, from /usr/include/boost/graph/adjacency_list.hpp:255, from /usr/include/boost/graph/graphviz.hpp:24: In member function 'boost::detail::adj_list_edge_iterator, boost::detail::out_edge_iter<__gnu_cxx::__normal_iterator, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > >*, std::vector, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > >, std::allocator, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > > > >, unsigned long, boost::detail::edge_desc_impl, long>, boost::adjacency_list, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> >, boost::property, std::allocator >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > >, boost::listS> >::operator++()', inlined from 'boost::detail::write_graphviz_subgraph, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> >, boost::property, std::allocator >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > >, boost::listS>, std::_Bit_iterator, boost::subgraph_local_property_map, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> >, boost::property, std::allocator >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > >, boost::listS> > const*, boost::vec_adj_list_vertex_id_map, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, unsigned long>, boost::vertex_index_t> >(std::basic_ostream >&, boost::subgraph, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> >, boost::property, std::allocator >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > >, boost::listS> > const&, std::_Bit_iterator, std::_Bit_iterator, boost::subgraph_local_property_map, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> >, boost::property, std::allocator >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > >, boost::listS> > const*, boost::vec_adj_list_vertex_id_map, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, unsigned long>, boost::vertex_index_t>)void [clone .isra.0]' at /usr/include/boost/graph/graphviz.hpp:386:67: /usr/include/boost/graph/detail/adj_list_edge_iterator.hpp:80:13: warning: 'MEM[(struct stored_edge_property * const &)&ei + 48]' may be used uninitialized [-Wmaybe-uninitialized] 80 | if (edges BOOST_GRAPH_MEMBER first | ^~ /usr/include/boost/graph/graphviz.hpp: In function 'boost::detail::write_graphviz_subgraph, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> >, boost::property, std::allocator >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > >, boost::listS>, std::_Bit_iterator, boost::subgraph_local_property_map, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> >, boost::property, std::allocator >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > >, boost::listS> > const*, boost::vec_adj_list_vertex_id_map, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, unsigned long>, boost::vertex_index_t> >(std::basic_ostream >&, boost::subgraph, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> >, boost::property, std::allocator >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > >, boost::listS> > const&, std::_Bit_iterator, std::_Bit_iterator, boost::subgraph_local_property_map, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> >, boost::property, std::allocator >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > >, boost::listS> > const*, boost::vec_adj_list_vertex_id_map, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, unsigned long>, boost::vertex_index_t>)void [clone .isra.0]': /usr/include/boost/graph/graphviz.hpp:371:55: note: 'MEM[(struct stored_edge_property * const &)&ei + 48]' was declared here 371 | typename graph_traits< Graph >::edge_iterator ei, edge_end; | ^~ In member function 'boost::detail::adj_list_edge_iterator, boost::detail::out_edge_iter<__gnu_cxx::__normal_iterator, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > >*, std::vector, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > >, std::allocator, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > > > >, unsigned long, boost::detail::edge_desc_impl, long>, boost::adjacency_list, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> >, boost::property, std::allocator >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > >, boost::listS> >::operator!=(boost::detail::adj_list_edge_iterator, boost::detail::out_edge_iter<__gnu_cxx::__normal_iterator, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > >*, std::vector, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > >, std::allocator, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > > > >, unsigned long, boost::detail::edge_desc_impl, long>, boost::adjacency_list, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> >, boost::property, std::allocator >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > >, boost::listS> > const&) const', inlined from 'boost::detail::write_graphviz_subgraph, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> >, boost::property, std::allocator >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > >, boost::listS>, std::_Bit_iterator, boost::subgraph_local_property_map, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> >, boost::property, std::allocator >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > >, boost::listS> > const*, boost::vec_adj_list_vertex_id_map, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, unsigned long>, boost::vertex_index_t> >(std::basic_ostream >&, boost::subgraph, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> >, boost::property, std::allocator >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > >, boost::listS> > const&, std::_Bit_iterator, std::_Bit_iterator, boost::subgraph_local_property_map, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> >, boost::property, std::allocator >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > >, boost::listS> > const*, boost::vec_adj_list_vertex_id_map, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, unsigned long>, boost::vertex_index_t>)void [clone .isra.0]' at /usr/include/boost/graph/graphviz.hpp:386:54: /usr/include/boost/graph/detail/adj_list_edge_iterator.hpp:112:21: warning: 'MEM[(struct __normal_iterator *)&ei + 32B]._M_current' may be used uninitialized [-Wmaybe-uninitialized] 111 | || (vCurr != vEnd | ~~~~~~~~~~~~~~ 112 | && edges BOOST_GRAPH_MEMBER first | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 113 | != x.edges BOOST_GRAPH_MEMBER first); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/include/boost/graph/graphviz.hpp: In function 'boost::detail::write_graphviz_subgraph, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> >, boost::property, std::allocator >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > >, boost::listS>, std::_Bit_iterator, boost::subgraph_local_property_map, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> >, boost::property, std::allocator >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > >, boost::listS> > const*, boost::vec_adj_list_vertex_id_map, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, unsigned long>, boost::vertex_index_t> >(std::basic_ostream >&, boost::subgraph, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> >, boost::property, std::allocator >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > >, boost::listS> > const&, std::_Bit_iterator, std::_Bit_iterator, boost::subgraph_local_property_map, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> >, boost::property, std::allocator >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::property, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property> > > >, boost::listS> > const*, boost::vec_adj_list_vertex_id_map, std::allocator >, std::__cxx11::basic_string, std::allocator >, std::less, std::allocator > >, std::allocator, std::allocator > const, std::__cxx11::basic_string, std::allocator > > > >, boost::no_property>, unsigned long>, boost::vertex_index_t>)void [clone .isra.0]': /usr/include/boost/graph/graphviz.hpp:371:55: note: 'MEM[(struct __normal_iterator *)&ei + 32B]._M_current' was declared here 371 | typename graph_traits< Graph >::edge_iterator ei, edge_end; | ^~ [ 43%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/MED_CoordUtils.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/MED_CoordUtils.cpp.o -MF CMakeFiles/SMESH.dir/src/SMESH/MED_CoordUtils.cpp.o.d -o CMakeFiles/SMESH.dir/src/SMESH/MED_CoordUtils.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESH/MED_CoordUtils.cpp [ 43%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/MED_Factory.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/MED_Factory.cpp.o -MF CMakeFiles/SMESH.dir/src/SMESH/MED_Factory.cpp.o.d -o CMakeFiles/SMESH.dir/src/SMESH/MED_Factory.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESH/MED_Factory.cpp In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESH/MED_Factory.cpp:30: /usr/include/med/med.h:443:20: warning: type qualifiers ignored on function return type [-Wignored-qualifiers] 443 | extern MEDC_EXPORT const char * const MEDgetGeometryTypeName (med_geometry_type geotype ); | ^~~~~ /usr/include/med/med.h:444:20: warning: type qualifiers ignored on function return type [-Wignored-qualifiers] 444 | extern MEDC_EXPORT const char * const MEDgetEntityTypeName (med_entity_type entitytype); | ^~~~~ [ 43%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/MED_GaussDef.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/MED_GaussDef.cpp.o -MF CMakeFiles/SMESH.dir/src/SMESH/MED_GaussDef.cpp.o.d -o CMakeFiles/SMESH.dir/src/SMESH/MED_GaussDef.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESH/MED_GaussDef.cpp [ 43%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/MED_GaussUtils.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/MED_GaussUtils.cpp.o -MF CMakeFiles/SMESH.dir/src/SMESH/MED_GaussUtils.cpp.o.d -o CMakeFiles/SMESH.dir/src/SMESH/MED_GaussUtils.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESH/MED_GaussUtils.cpp [ 43%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/DocumentObject.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DLIBRARYDIR=\"lib64\" -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App/FreeCADApp_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/App/CMakeFiles/FreeCADApp.dir/DocumentObject.cpp.o -MF CMakeFiles/FreeCADApp.dir/DocumentObject.cpp.o.d -o CMakeFiles/FreeCADApp.dir/DocumentObject.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/App/DocumentObject.cpp [ 43%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/MED_Structures.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/MED_Structures.cpp.o -MF CMakeFiles/SMESH.dir/src/SMESH/MED_Structures.cpp.o.d -o CMakeFiles/SMESH.dir/src/SMESH/MED_Structures.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESH/MED_Structures.cpp [ 43%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/MED_Utilities.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/MED_Utilities.cpp.o -MF CMakeFiles/SMESH.dir/src/SMESH/MED_Utilities.cpp.o.d -o CMakeFiles/SMESH.dir/src/SMESH/MED_Utilities.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESH/MED_Utilities.cpp [ 43%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/MED_V2_2_Wrapper.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/MED_V2_2_Wrapper.cpp.o -MF CMakeFiles/SMESH.dir/src/SMESH/MED_V2_2_Wrapper.cpp.o.d -o CMakeFiles/SMESH.dir/src/SMESH/MED_V2_2_Wrapper.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESH/MED_V2_2_Wrapper.cpp In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESH/MED_V2_2_Wrapper.cpp:27: /usr/include/med/med.h:443:20: warning: type qualifiers ignored on function return type [-Wignored-qualifiers] 443 | extern MEDC_EXPORT const char * const MEDgetGeometryTypeName (med_geometry_type geotype ); | ^~~~~ /usr/include/med/med.h:444:20: warning: type qualifiers ignored on function return type [-Wignored-qualifiers] 444 | extern MEDC_EXPORT const char * const MEDgetEntityTypeName (med_entity_type entitytype); | ^~~~~ [ 43%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/Extension.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DLIBRARYDIR=\"lib64\" -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App/FreeCADApp_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/App/CMakeFiles/FreeCADApp.dir/Extension.cpp.o -MF CMakeFiles/FreeCADApp.dir/Extension.cpp.o.d -o CMakeFiles/FreeCADApp.dir/Extension.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/App/Extension.cpp [ 43%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/ExtensionPyImp.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DLIBRARYDIR=\"lib64\" -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App/FreeCADApp_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/App/CMakeFiles/FreeCADApp.dir/ExtensionPyImp.cpp.o -MF CMakeFiles/FreeCADApp.dir/ExtensionPyImp.cpp.o.d -o CMakeFiles/FreeCADApp.dir/ExtensionPyImp.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/App/ExtensionPyImp.cpp [ 43%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/MED_Wrapper.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/MED_Wrapper.cpp.o -MF CMakeFiles/SMESH.dir/src/SMESH/MED_Wrapper.cpp.o.d -o CMakeFiles/SMESH.dir/src/SMESH/MED_Wrapper.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESH/MED_Wrapper.cpp [ 43%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/DocumentObjectExtension.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DLIBRARYDIR=\"lib64\" -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App/FreeCADApp_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/App/CMakeFiles/FreeCADApp.dir/DocumentObjectExtension.cpp.o -MF CMakeFiles/FreeCADApp.dir/DocumentObjectExtension.cpp.o.d -o CMakeFiles/FreeCADApp.dir/DocumentObjectExtension.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/App/DocumentObjectExtension.cpp [ 43%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/SMESH_Algo.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/SMESH_Algo.cpp.o -MF CMakeFiles/SMESH.dir/src/SMESH/SMESH_Algo.cpp.o.d -o CMakeFiles/SMESH.dir/src/SMESH/SMESH_Algo.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESH/SMESH_Algo.cpp In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshNode.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESH_Algo.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESH/SMESH_Algo.cpp:28: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_construct.h:61, from /usr/include/c++/13/bits/stl_tempbuf.h:61, from /usr/include/c++/13/memory:66, from /usr/include/boost/smart_ptr/detail/sp_counted_impl.hpp:35, from /usr/include/boost/smart_ptr/detail/shared_count.hpp:27, from /usr/include/boost/smart_ptr/shared_ptr.hpp:17, from /usr/include/boost/shared_ptr.hpp:17, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_ElemIterator.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:34: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 43%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/DocumentObjectExtensionPyImp.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DLIBRARYDIR=\"lib64\" -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App/FreeCADApp_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/App/CMakeFiles/FreeCADApp.dir/DocumentObjectExtensionPyImp.cpp.o -MF CMakeFiles/FreeCADApp.dir/DocumentObjectExtensionPyImp.cpp.o.d -o CMakeFiles/FreeCADApp.dir/DocumentObjectExtensionPyImp.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/App/DocumentObjectExtensionPyImp.cpp In file included from /usr/include/opencascade/NCollection_IndexedDataMap.hxx:23, from /usr/include/opencascade/Standard_Dump.hxx:17, from /usr/include/opencascade/NCollection_Vec2.hxx:20, from /usr/include/opencascade/NCollection_Vec3.hxx:20, from /usr/include/opencascade/NCollection_Vec4.hxx:18, from /usr/include/opencascade/NCollection_Mat4.hxx:19, from /usr/include/opencascade/gp_Trsf.hxx:21, from /usr/include/opencascade/TopLoc_ItemLocation.hxx:26, from /usr/include/opencascade/TopLoc_Location.lxx:18, from /usr/include/opencascade/TopLoc_Location.hxx:179, from /usr/include/opencascade/TopoDS_Shape.hxx:24, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESH_Algo.hxx:39: /usr/include/opencascade/NCollection_StlIterator.hxx:30:15: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 30 | public std::iterator struct std::iterator' is deprecated [-Wdeprecated-declarations] 30 | public std::iterator struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 43%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/GroupExtension.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DLIBRARYDIR=\"lib64\" -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App/FreeCADApp_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/App/CMakeFiles/FreeCADApp.dir/GroupExtension.cpp.o -MF CMakeFiles/FreeCADApp.dir/GroupExtension.cpp.o.d -o CMakeFiles/FreeCADApp.dir/GroupExtension.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/App/GroupExtension.cpp [ 43%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/SMESH_Exception.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/SMESH_Exception.cpp.o -MF CMakeFiles/SMESH.dir/src/SMESH/SMESH_Exception.cpp.o.d -o CMakeFiles/SMESH.dir/src/SMESH/SMESH_Exception.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESH/SMESH_Exception.cpp [ 43%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/SMESH_Gen.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/SMESH_Gen.cpp.o -MF CMakeFiles/SMESH.dir/src/SMESH/SMESH_Gen.cpp.o.d -o CMakeFiles/SMESH.dir/src/SMESH/SMESH_Gen.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESH/SMESH_Gen.cpp In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshNode.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESH_Algo.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESH_Gen.hxx:37, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESH/SMESH_Gen.cpp:31: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_iterator_base_funcs.h:66, from /usr/include/c++/13/string:47, from /usr/include/c++/13/bits/locale_classes.h:40, from /usr/include/c++/13/bits/ios_base.h:41, from /usr/include/c++/13/ios:44, from /usr/include/c++/13/ostream:40, from /usr/include/c++/13/iostream:41, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/Utils_SALOME_Exception.hxx:35, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESH_Gen.hxx:33: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ In file included from /usr/include/opencascade/NCollection_IndexedDataMap.hxx:23, from /usr/include/opencascade/Standard_Dump.hxx:17, from /usr/include/opencascade/NCollection_Vec2.hxx:20, from /usr/include/opencascade/NCollection_Vec3.hxx:20, from /usr/include/opencascade/NCollection_Vec4.hxx:18, from /usr/include/opencascade/NCollection_Mat4.hxx:19, from /usr/include/opencascade/gp_Trsf.hxx:21, from /usr/include/opencascade/TopLoc_ItemLocation.hxx:26, from /usr/include/opencascade/TopLoc_Location.lxx:18, from /usr/include/opencascade/TopLoc_Location.hxx:179, from /usr/include/opencascade/TopoDS_Shape.hxx:24, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESH_Algo.hxx:39: /usr/include/opencascade/NCollection_StlIterator.hxx:30:15: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 30 | public std::iterator struct std::iterator' is deprecated [-Wdeprecated-declarations] 30 | public std::iterator struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:194:16: warning: 'virtual void SMDS_MeshElement::init(int, ShortType, LongType)' was hidden [-Woverloaded-virtual=] 194 | virtual void init(int id = -1, ShortType meshId = -1, LongType shapeId = 0); | ^~~~ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshNode.hxx:67:8: note: by 'void SMDS_MeshNode::init(int, int, int, double, double, double)' 67 | void init(int id, int meshId, int shapeId = -1, double x=0, double y=0, double z=0); | ^~~~ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:194:16: warning: 'virtual void SMDS_MeshElement::init(int, ShortType, LongType)' was hidden [-Woverloaded-virtual=] 194 | virtual void init(int id = -1, ShortType meshId = -1, LongType shapeId = 0); | ^~~~ In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_Mesh.hxx:43: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_VtkEdge.hxx:40:8: note: by 'void SMDS_VtkEdge::init(std::vector&, SMDS_Mesh*)' 40 | void init(std::vector& nodeIds, SMDS_Mesh* mesh); | ^~~~ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:194:16: warning: 'virtual void SMDS_MeshElement::init(int, ShortType, LongType)' was hidden [-Woverloaded-virtual=] 194 | virtual void init(int id = -1, ShortType meshId = -1, LongType shapeId = 0); | ^~~~ In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_Mesh.hxx:44: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_VtkFace.hxx:35:8: note: by 'void SMDS_VtkFace::init(const std::vector&, SMDS_Mesh*)' 35 | void init(const std::vector& nodeIds, SMDS_Mesh* mesh); | ^~~~ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:194:16: warning: 'virtual void SMDS_MeshElement::init(int, ShortType, LongType)' was hidden [-Woverloaded-virtual=] 194 | virtual void init(int id = -1, ShortType meshId = -1, LongType shapeId = 0); | ^~~~ In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_Mesh.hxx:45: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_VtkVolume.hxx:35:8: note: by 'void SMDS_VtkVolume::init(const std::vector&, SMDS_Mesh*)' 35 | void init(const std::vector& nodeIds, SMDS_Mesh* mesh); | ^~~~ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:194:16: warning: 'virtual void SMDS_MeshElement::init(int, ShortType, LongType)' was hidden [-Woverloaded-virtual=] 194 | virtual void init(int id = -1, ShortType meshId = -1, LongType shapeId = 0); | ^~~~ In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_Mesh.hxx:48: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_BallElement.hxx:38:8: note: by 'void SMDS_BallElement::init(vtkIdType, double, SMDS_Mesh*)' 38 | void init(vtkIdType nodeId, double diameter, SMDS_Mesh* mesh); | ^~~~ [ 44%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/SMESH_HypoFilter.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/SMESH_HypoFilter.cpp.o -MF CMakeFiles/SMESH.dir/src/SMESH/SMESH_HypoFilter.cpp.o.d -o CMakeFiles/SMESH.dir/src/SMESH/SMESH_HypoFilter.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESH/SMESH_HypoFilter.cpp [ 44%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/GroupExtensionPyImp.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DLIBRARYDIR=\"lib64\" -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App/FreeCADApp_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/App/CMakeFiles/FreeCADApp.dir/GroupExtensionPyImp.cpp.o -MF CMakeFiles/FreeCADApp.dir/GroupExtensionPyImp.cpp.o.d -o CMakeFiles/FreeCADApp.dir/GroupExtensionPyImp.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/App/GroupExtensionPyImp.cpp In file included from /usr/include/opencascade/NCollection_IndexedDataMap.hxx:23, from /usr/include/opencascade/Standard_Dump.hxx:17, from /usr/include/opencascade/NCollection_Vec2.hxx:20, from /usr/include/opencascade/NCollection_Vec3.hxx:20, from /usr/include/opencascade/NCollection_Vec4.hxx:18, from /usr/include/opencascade/NCollection_Mat4.hxx:19, from /usr/include/opencascade/gp_Trsf.hxx:21, from /usr/include/opencascade/TopLoc_ItemLocation.hxx:26, from /usr/include/opencascade/TopLoc_Location.lxx:18, from /usr/include/opencascade/TopLoc_Location.hxx:179, from /usr/include/opencascade/TopoDS_Shape.hxx:24, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESH_HypoFilter.hxx:38, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESH/SMESH_HypoFilter.cpp:27: /usr/include/opencascade/NCollection_StlIterator.hxx:30:15: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 30 | public std::iterator struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:194:16: warning: 'virtual void SMDS_MeshElement::init(int, ShortType, LongType)' was hidden [-Woverloaded-virtual=] 194 | virtual void init(int id = -1, ShortType meshId = -1, LongType shapeId = 0); | ^~~~ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshNode.hxx:67:8: note: by 'void SMDS_MeshNode::init(int, int, int, double, double, double)' 67 | void init(int id, int meshId, int shapeId = -1, double x=0, double y=0, double z=0); | ^~~~ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:194:16: warning: 'virtual void SMDS_MeshElement::init(int, ShortType, LongType)' was hidden [-Woverloaded-virtual=] 194 | virtual void init(int id = -1, ShortType meshId = -1, LongType shapeId = 0); | ^~~~ In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_Mesh.hxx:43, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESHDS_Mesh.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESH_Mesh.hxx:34, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESH_Gen.hxx:38: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_VtkEdge.hxx:40:8: note: by 'void SMDS_VtkEdge::init(std::vector&, SMDS_Mesh*)' 40 | void init(std::vector& nodeIds, SMDS_Mesh* mesh); | ^~~~ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:194:16: warning: 'virtual void SMDS_MeshElement::init(int, ShortType, LongType)' was hidden [-Woverloaded-virtual=] 194 | virtual void init(int id = -1, ShortType meshId = -1, LongType shapeId = 0); | ^~~~ In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_Mesh.hxx:44: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_VtkFace.hxx:35:8: note: by 'void SMDS_VtkFace::init(const std::vector&, SMDS_Mesh*)' 35 | void init(const std::vector& nodeIds, SMDS_Mesh* mesh); | ^~~~ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:194:16: warning: 'virtual void SMDS_MeshElement::init(int, ShortType, LongType)' was hidden [-Woverloaded-virtual=] 194 | virtual void init(int id = -1, ShortType meshId = -1, LongType shapeId = 0); | ^~~~ In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_Mesh.hxx:45: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_VtkVolume.hxx:35:8: note: by 'void SMDS_VtkVolume::init(const std::vector&, SMDS_Mesh*)' 35 | void init(const std::vector& nodeIds, SMDS_Mesh* mesh); | ^~~~ /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:194:16: warning: 'virtual void SMDS_MeshElement::init(int, ShortType, LongType)' was hidden [-Woverloaded-virtual=] 194 | virtual void init(int id = -1, ShortType meshId = -1, LongType shapeId = 0); | ^~~~ In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_Mesh.hxx:48: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_BallElement.hxx:38:8: note: by 'void SMDS_BallElement::init(vtkIdType, double, SMDS_Mesh*)' 38 | void init(vtkIdType nodeId, double diameter, SMDS_Mesh* mesh); | ^~~~ [ 44%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/SMESH_Hypothesis.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DCSFDB -DDIY_NO_THREADS -DH5_BUILT_AS_DYNAMIC_LIB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -D_OCC64 -Dkiss_fft_scalar=double -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMDS -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/Driver -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverUNV -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverDAT -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/DriverSTL -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/StdMeshers -I/builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I/usr/include/med -isystem /usr/include/vtk -isystem /usr/include/freetype2 -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -Wno-empty-body -Wno-pedantic -Wno-unused-result -Wno-cast-function-type -Wno-maybe-uninitialized -Wno-missing-field-initializers -std=gnu++17 -fPIC -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/SMESH_Hypothesis.cpp.o -MF CMakeFiles/SMESH.dir/src/SMESH/SMESH_Hypothesis.cpp.o.d -o CMakeFiles/SMESH.dir/src/SMESH/SMESH_Hypothesis.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESH/SMESH_Hypothesis.cpp In file included from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:36, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_MeshNode.hxx:32, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESH_Algo.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESH_Gen.hxx:37, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESH/SMESH_Hypothesis.cpp:29: /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMDS_StdIterator.hxx:37:38: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_iterator_base_funcs.h:66, from /usr/include/c++/13/string:47, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESHDS_Hypothesis.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESH_Hypothesis.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/src/SMESH/SMESH_Hypothesis.cpp:28: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ In file included from /usr/include/opencascade/NCollection_IndexedDataMap.hxx:23, from /usr/include/opencascade/Standard_Dump.hxx:17, from /usr/include/opencascade/NCollection_Vec2.hxx:20, from /usr/include/opencascade/NCollection_Vec3.hxx:20, from /usr/include/opencascade/NCollection_Vec4.hxx:18, from /usr/include/opencascade/NCollection_Mat4.hxx:19, from /usr/include/opencascade/gp_Trsf.hxx:21, from /usr/include/opencascade/TopLoc_ItemLocation.hxx:26, from /usr/include/opencascade/TopLoc_Location.lxx:18, from /usr/include/opencascade/TopLoc_Location.hxx:179, from /usr/include/opencascade/TopoDS_Shape.hxx:24, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESH_Algo.hxx:39: /usr/include/opencascade/NCollection_StlIterator.hxx:30:15: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 30 | public std::iterator struct std::iterator' is deprecated [-Wdeprecated-declarations] 37 | class SMDS_StdIterator : public std::iterator< std::input_iterator_tag, VALUE > | ^~~~~~~~ In file included from /usr/include/c++/13/bits/stl_algobase.h:65, from /usr/include/c++/13/list:62, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESHDS_Command.hxx:33, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESH_Mesh.hxx:33: /usr/include/c++/13/bits/stl_iterator_base_types.h:127:34: note: declared here 127 | struct _GLIBCXX17_DEPRECATED iterator | ^~~~~~~~ [ 44%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/DocumentObjectFileIncluded.cpp.o cd /builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App && /usr/bin/g++ -DBOOST_ATOMIC_DYN_LINK -DBOOST_ATOMIC_NO_LIB -DBOOST_DATE_TIME_DYN_LINK -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_FILESYSTEM_NO_LIB -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_PROGRAM_OPTIONS_NO_LIB -DBOOST_REGEX_DYN_LINK -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_DYN_LINK -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_DYN_LINK -DBOOST_THREAD_NO_LIB -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DLIBRARYDIR=\"lib64\" -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -D_OCC64 -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App/FreeCADApp_autogen/include -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src -I/builddir/build/BUILD/FreeCAD-0.20.2/src -I/builddir/build/BUILD/FreeCAD-0.20.2/redhat-linux-build/src/App -I/usr/include/python3.11 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -std=gnu++17 -fPIC -fPIC -MD -MT src/App/CMakeFiles/FreeCADApp.dir/DocumentObjectFileIncluded.cpp.o -MF CMakeFiles/FreeCADApp.dir/DocumentObjectFileIncluded.cpp.o.d -o CMakeFiles/FreeCADApp.dir/DocumentObjectFileIncluded.cpp.o -c /builddir/build/BUILD/FreeCAD-0.20.2/src/App/DocumentObjectFileIncluded.cpp In file included from /usr/include/opencascade/NCollection_IndexedDataMap.hxx:23, from /usr/include/opencascade/Standard_Dump.hxx:17, from /usr/include/opencascade/NCollection_Vec2.hxx:20, from /usr/include/opencascade/NCollection_Vec3.hxx:20, from /usr/include/opencascade/NCollection_Vec4.hxx:18, from /usr/include/opencascade/NCollection_Mat4.hxx:19, from /usr/include/opencascade/gp_Trsf.hxx:21, from /usr/include/opencascade/TopLoc_ItemLocation.hxx:26, from /usr/include/opencascade/TopLoc_Location.lxx:18, from /usr/include/opencascade/TopLoc_Location.hxx:179, from /usr/include/opencascade/TopoDS_Shape.hxx:24, from /usr/include/opencascade/TopTools_IndexedMapOfShape.hxx:20, from /builddir/build/BUILD/FreeCAD-0.20.2/src/3rdParty/salomesmesh/inc/SMESHDS_Mesh.hxx:35: /usr/include/opencascade/NCollection_StlIterator.hxx:30:15: warning: 'template struct std::iterator' is deprecated [-Wdeprecated-declarations] 30 | public std::iterator