Warning: Permanently added '2620:52:3:1:dead:beef:cafe:c191' (ED25519) to the list of known hosts.
cmd: ['dist-git-client', 'sources']
cwd: /var/lib/copr-rpmbuild/workspace/workdir-b3tvont_/rebase-helper
rc: 0
stdout: 
stderr: INFO: Reading stdout from command: git rev-parse --abbrev-ref HEAD
INFO: Reading stdout from command: git rev-parse HEAD
INFO: Reading sources specification file: sources
INFO: Downloading rebasehelper-0.29.2.post1.dev2+gcb25188.tar.gz
INFO: Reading stdout from command: curl --help all
INFO: Calling: curl -H Pragma: -o rebasehelper-0.29.2.post1.dev2+gcb25188.tar.gz --location --connect-timeout 60 --retry 3 --retry-delay 10 --remote-time --show-error --fail --retry-all-errors https://copr-dist-git.fedorainfracloud.org/repo/pkgs/packit-stg/rebase-helper-rebase-helper-932/rebase-helper/rebasehelper-0.29.2.post1.dev2+gcb25188.tar.gz/md5/7c387d9380a3fb5c9395a124ff03c507/rebasehelper-0.29.2.post1.dev2+gcb25188.tar.gz
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 1858k  100 1858k    0     0  17.3M      0 --:--:-- --:--:-- --:--:-- 17.4M
INFO: Reading stdout from command: md5sum rebasehelper-0.29.2.post1.dev2+gcb25188.tar.gz

Running (timeout=18000): unbuffer mock --spec /var/lib/copr-rpmbuild/workspace/workdir-b3tvont_/rebase-helper/rebase-helper.spec --sources /var/lib/copr-rpmbuild/workspace/workdir-b3tvont_/rebase-helper --resultdir /var/lib/copr-rpmbuild/results --uniqueext 1738226926.124416 -r /var/lib/copr-rpmbuild/results/configs/child.cfg
INFO: mock.py version 6.0 starting (python version = 3.13.0, NVR = mock-6.0-1.fc41), args: /usr/libexec/mock/mock --spec /var/lib/copr-rpmbuild/workspace/workdir-b3tvont_/rebase-helper/rebase-helper.spec --sources /var/lib/copr-rpmbuild/workspace/workdir-b3tvont_/rebase-helper --resultdir /var/lib/copr-rpmbuild/results --uniqueext 1738226926.124416 -r /var/lib/copr-rpmbuild/results/configs/child.cfg
Start(bootstrap): init plugins
INFO: tmpfs initialized
INFO: selinux enabled
INFO: chroot_scan: initialized
INFO: compress_logs: initialized
Finish(bootstrap): init plugins
Start: init plugins
INFO: tmpfs initialized
INFO: selinux enabled
INFO: chroot_scan: initialized
INFO: compress_logs: initialized
Finish: init plugins
INFO: Signal handler active
Start: run
INFO: Start(/var/lib/copr-rpmbuild/workspace/workdir-b3tvont_/rebase-helper/rebase-helper.spec)  Config(fedora-40-x86_64)
Start: clean chroot
Finish: clean chroot
Mock Version: 6.0
INFO: Mock Version: 6.0
Start(bootstrap): chroot init
INFO: mounting tmpfs at /var/lib/mock/fedora-40-x86_64-bootstrap-1738226926.124416/root.
INFO: calling preinit hooks
INFO: enabled root cache
INFO: enabled package manager cache
Start(bootstrap): cleaning package manager metadata
Finish(bootstrap): cleaning package manager metadata
INFO: Guessed host environment type: unknown
INFO: Using container image: registry.fedoraproject.org/fedora:40
INFO: Pulling image: registry.fedoraproject.org/fedora:40
INFO: Tagging container image as mock-bootstrap-0652bdd0-3e76-4cf0-b2a0-7f78e49867d9
INFO: Checking that 98b6fdc28b6b4dffbe365c3c16e6db854f129f0244ab983ad359376e7cea5650 image matches host's architecture
INFO: Copy content of container 98b6fdc28b6b4dffbe365c3c16e6db854f129f0244ab983ad359376e7cea5650 to /var/lib/mock/fedora-40-x86_64-bootstrap-1738226926.124416/root
INFO: mounting 98b6fdc28b6b4dffbe365c3c16e6db854f129f0244ab983ad359376e7cea5650 with podman image mount
INFO: image 98b6fdc28b6b4dffbe365c3c16e6db854f129f0244ab983ad359376e7cea5650 as /var/lib/containers/storage/overlay/175b70ec28a10091397ceaf4e8f704fbdc3d4d2898dadfdebffc2f057444d035/merged
INFO: umounting image 98b6fdc28b6b4dffbe365c3c16e6db854f129f0244ab983ad359376e7cea5650 (/var/lib/containers/storage/overlay/175b70ec28a10091397ceaf4e8f704fbdc3d4d2898dadfdebffc2f057444d035/merged) with podman image umount
INFO: Removing image mock-bootstrap-0652bdd0-3e76-4cf0-b2a0-7f78e49867d9
INFO: Using 'dnf4' instead of 'dnf5' for bootstrap chroot
INFO: Package manager dnf4 detected and used (fallback)
INFO: Bootstrap image not marked ready
Start(bootstrap): installing dnf5 tooling
No matches found for the following disable plugin patterns: local, spacewalk, versionlock
Copr repository                                 1.1 kB/s | 133  B     00:00    
fedora                                           15 MB/s |  20 MB     00:01    
updates                                          19 MB/s |  12 MB     00:00    
Dependencies resolved.
================================================================================
 Package             Architecture  Version                 Repository      Size
================================================================================
Installing:
 dnf5                x86_64        5.1.17-3.fc40           updates        699 k
 dnf5-plugins        x86_64        5.1.17-3.fc40           updates        358 k
Installing dependencies:
 fmt                 x86_64        10.2.1-5.fc40           updates        125 k
 libdnf5             x86_64        5.1.17-3.fc40           updates        1.0 M
 libdnf5-cli         x86_64        5.1.17-3.fc40           updates        231 k
 sdbus-cpp           x86_64        1.4.0-2.fc40            fedora         110 k

Transaction Summary
================================================================================
Install  6 Packages

Total download size: 2.5 M
Installed size: 6.9 M
Downloading Packages:
(1/6): sdbus-cpp-1.4.0-2.fc40.x86_64.rpm        133 kB/s | 110 kB     00:00    
(2/6): fmt-10.2.1-5.fc40.x86_64.rpm             322 kB/s | 125 kB     00:00    
(3/6): dnf5-plugins-5.1.17-3.fc40.x86_64.rpm    261 kB/s | 358 kB     00:01    
(4/6): libdnf5-5.1.17-3.fc40.x86_64.rpm         3.3 MB/s | 1.0 MB     00:00    
(5/6): libdnf5-cli-5.1.17-3.fc40.x86_64.rpm     397 kB/s | 231 kB     00:00    
(6/6): dnf5-5.1.17-3.fc40.x86_64.rpm            311 kB/s | 699 kB     00:02    
--------------------------------------------------------------------------------
Total                                           1.1 MB/s | 2.5 MB     00:02     
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction
  Preparing        :                                                        1/1 
  Installing       : fmt-10.2.1-5.fc40.x86_64                               1/6 
  Installing       : libdnf5-5.1.17-3.fc40.x86_64                           2/6 
  Installing       : libdnf5-cli-5.1.17-3.fc40.x86_64                       3/6 
  Installing       : sdbus-cpp-1.4.0-2.fc40.x86_64                          4/6 
  Installing       : dnf5-5.1.17-3.fc40.x86_64                              5/6 
  Installing       : dnf5-plugins-5.1.17-3.fc40.x86_64                      6/6 
  Running scriptlet: dnf5-plugins-5.1.17-3.fc40.x86_64                      6/6 

Installed:
  dnf5-5.1.17-3.fc40.x86_64              dnf5-plugins-5.1.17-3.fc40.x86_64      
  fmt-10.2.1-5.fc40.x86_64               libdnf5-5.1.17-3.fc40.x86_64           
  libdnf5-cli-5.1.17-3.fc40.x86_64       sdbus-cpp-1.4.0-2.fc40.x86_64          

Complete!
INFO: Switching package manager from dnf4 to the dnf5 (direct choice)
Finish(bootstrap): installing dnf5 tooling
Start(bootstrap): creating root cache
Finish(bootstrap): creating root cache
Finish(bootstrap): chroot init
Start: chroot init
INFO: mounting tmpfs at /var/lib/mock/fedora-40-x86_64-1738226926.124416/root.
INFO: calling preinit hooks
INFO: enabled root cache
INFO: enabled package manager cache
Start: cleaning package manager metadata
Finish: cleaning package manager metadata
INFO: enabled HW Info plugin
INFO: Package manager dnf5 detected and used (direct choice)
INFO: Buildroot is handled by package management downloaded with a bootstrap image:
  rpm-4.19.1.1-1.fc40.x86_64
  rpm-sequoia-1.7.0-3.fc40.x86_64
  python3-dnf-4.22.0-1.fc40.noarch
  yum-4.22.0-1.fc40.noarch
  dnf5-5.1.17-3.fc40.x86_64
  dnf5-plugins-5.1.17-3.fc40.x86_64
Start: installing minimal buildroot with dnf5
Updating and loading repositories:
 updates                                100% |  12.8 MiB/s |  12.7 MiB |  00m01s
 fedora                                 100% |  16.3 MiB/s |  20.8 MiB |  00m01s
 Copr repository                        100% |  13.7 KiB/s |   1.6 KiB |  00m00s
Repositories loaded.
Package                           Arch   Version                     Repository      Size
Installing group/module packages:                                                        
 bash                             x86_64 5.2.26-3.fc40               fedora       8.1 MiB
 bzip2                            x86_64 1.0.8-18.fc40               fedora      91.7 KiB
 coreutils                        x86_64 9.4-9.fc40                  updates      5.8 MiB
 cpio                             x86_64 2.15-1.fc40                 fedora       1.1 MiB
 diffutils                        x86_64 3.10-5.fc40                 fedora       1.6 MiB
 fedora-release-common            noarch 40-40                       updates     19.2 KiB
 findutils                        x86_64 1:4.9.0-9.fc40              updates      1.5 MiB
 gawk                             x86_64 5.3.0-3.fc40                fedora       1.7 MiB
 glibc-minimal-langpack           x86_64 2.39-37.fc40                updates      0.0   B
 grep                             x86_64 3.11-7.fc40                 fedora       1.0 MiB
 gzip                             x86_64 1.13-1.fc40                 fedora     385.0 KiB
 info                             x86_64 7.1-2.fc40                  fedora     357.8 KiB
 patch                            x86_64 2.7.6-24.fc40               fedora     262.8 KiB
 redhat-rpm-config                noarch 288-1.fc40                  updates    185.2 KiB
 rpm-build                        x86_64 4.19.1.1-1.fc40             fedora     173.7 KiB
 sed                              x86_64 4.9-1.fc40                  fedora     861.5 KiB
 shadow-utils                     x86_64 2:4.15.1-4.fc40             updates      4.1 MiB
 tar                              x86_64 2:1.35-3.fc40               fedora       2.9 MiB
 unzip                            x86_64 6.0-63.fc40                 fedora     382.8 KiB
 util-linux                       x86_64 2.40.2-1.fc40               updates      3.7 MiB
 which                            x86_64 2.21-41.fc40                fedora      80.2 KiB
 xz                               x86_64 1:5.4.6-3.fc40              fedora       2.0 MiB
Installing dependencies:                                                                 
 alternatives                     x86_64 1.27-1.fc40                 updates     66.3 KiB
 ansible-srpm-macros              noarch 1-16.fc40                   updates     35.7 KiB
 audit-libs                       x86_64 4.0.3-1.fc40                updates    347.4 KiB
 authselect                       x86_64 1.5.0-6.fc40                updates    153.6 KiB
 authselect-libs                  x86_64 1.5.0-6.fc40                updates    818.2 KiB
 basesystem                       noarch 11-20.fc40                  fedora       0.0   B
 binutils                         x86_64 2.41-38.fc40                updates     26.4 MiB
 binutils-gold                    x86_64 2.41-38.fc40                updates      2.0 MiB
 bzip2-libs                       x86_64 1.0.8-18.fc40               fedora      80.7 KiB
 ca-certificates                  noarch 2024.2.69_v8.0.401-1.0.fc40 updates      2.4 MiB
 coreutils-common                 x86_64 9.4-9.fc40                  updates     11.4 MiB
 cracklib                         x86_64 2.9.11-5.fc40               fedora     238.9 KiB
 crypto-policies                  noarch 20241011-1.git5930b9a.fc40  updates    158.0 KiB
 curl                             x86_64 8.6.0-10.fc40               updates    738.6 KiB
 cyrus-sasl-lib                   x86_64 2.1.28-19.fc40              fedora       2.3 MiB
 debugedit                        x86_64 5.0-18.fc40                 updates    199.3 KiB
 dwz                              x86_64 0.15-8.fc40                 updates    294.9 KiB
 ed                               x86_64 1.20.2-1.fc40               updates    146.9 KiB
 efi-srpm-macros                  noarch 5-11.fc40                   fedora      40.1 KiB
 elfutils                         x86_64 0.192-7.fc40                updates      2.7 MiB
 elfutils-debuginfod-client       x86_64 0.192-7.fc40                updates     80.2 KiB
 elfutils-default-yama-scope      noarch 0.192-7.fc40                updates      1.8 KiB
 elfutils-libelf                  x86_64 0.192-7.fc40                updates      1.2 MiB
 elfutils-libs                    x86_64 0.192-7.fc40                updates    670.3 KiB
 fedora-gpg-keys                  noarch 40-2                        updates    124.7 KiB
 fedora-release                   noarch 40-40                       updates      0.0   B
 fedora-release-identity-basic    noarch 40-40                       updates    654.0   B
 fedora-repos                     noarch 40-2                        updates      4.9 KiB
 file                             x86_64 5.45-4.fc40                 fedora     103.5 KiB
 file-libs                        x86_64 5.45-4.fc40                 fedora       9.9 MiB
 filesystem                       x86_64 3.18-8.fc40                 fedora     106.0   B
 fonts-srpm-macros                noarch 1:2.0.5-14.fc40             fedora      55.3 KiB
 forge-srpm-macros                noarch 0.4.0-1.fc40                updates     38.9 KiB
 fpc-srpm-macros                  noarch 1.3-12.fc40                 fedora     144.0   B
 gdb-minimal                      x86_64 15.2-4.fc40                 updates     13.0 MiB
 gdbm                             x86_64 1:1.23-6.fc40               fedora     460.9 KiB
 gdbm-libs                        x86_64 1:1.23-6.fc40               fedora     121.9 KiB
 ghc-srpm-macros                  noarch 1.9.1-1.fc40                updates    747.0   B
 glibc                            x86_64 2.39-37.fc40                updates      6.6 MiB
 glibc-common                     x86_64 2.39-37.fc40                updates      1.0 MiB
 glibc-gconv-extra                x86_64 2.39-37.fc40                updates      7.8 MiB
 gmp                              x86_64 1:6.2.1-8.fc40              fedora     794.6 KiB
 gnat-srpm-macros                 noarch 6-5.fc40                    fedora       1.0 KiB
 go-srpm-macros                   noarch 3.5.0-1.fc40                fedora      60.6 KiB
 jansson                          x86_64 2.13.1-9.fc40               fedora      88.3 KiB
 json-c                           x86_64 0.17-3.fc40                 fedora      82.4 KiB
 kernel-srpm-macros               noarch 1.0-23.fc40                 fedora       1.9 KiB
 keyutils-libs                    x86_64 1.6.3-3.fc40                fedora      54.4 KiB
 krb5-libs                        x86_64 1.21.3-2.fc40               updates      2.3 MiB
 libacl                           x86_64 2.3.2-1.fc40                fedora      40.0 KiB
 libarchive                       x86_64 3.7.2-7.fc40                updates    922.6 KiB
 libattr                          x86_64 2.5.2-3.fc40                fedora      28.5 KiB
 libblkid                         x86_64 2.40.2-1.fc40               updates    258.6 KiB
 libbrotli                        x86_64 1.1.0-3.fc40                fedora     829.5 KiB
 libcap                           x86_64 2.69-8.fc40                 updates    219.8 KiB
 libcap-ng                        x86_64 0.8.4-4.fc40                fedora      73.1 KiB
 libcom_err                       x86_64 1.47.0-5.fc40               fedora      67.2 KiB
 libcurl                          x86_64 8.6.0-10.fc40               updates    776.8 KiB
 libeconf                         x86_64 0.6.2-2.fc40                updates     58.0 KiB
 libevent                         x86_64 2.1.12-12.fc40              fedora     895.6 KiB
 libfdisk                         x86_64 2.40.2-1.fc40               updates    362.9 KiB
 libffi                           x86_64 3.4.4-7.fc40                fedora      81.6 KiB
 libgcc                           x86_64 14.2.1-3.fc40               updates    274.6 KiB
 libgomp                          x86_64 14.2.1-3.fc40               updates    523.6 KiB
 libidn2                          x86_64 2.3.7-1.fc40                fedora     329.1 KiB
 libmount                         x86_64 2.40.2-1.fc40               updates    355.8 KiB
 libnghttp2                       x86_64 1.59.0-3.fc40               updates    166.1 KiB
 libnsl2                          x86_64 2.0.1-1.fc40                fedora      57.9 KiB
 libpkgconf                       x86_64 2.1.1-2.fc40                updates     74.2 KiB
 libpsl                           x86_64 0.21.5-3.fc40               fedora      80.5 KiB
 libpwquality                     x86_64 1.4.5-9.fc40                fedora     417.8 KiB
 libselinux                       x86_64 3.7-5.fc40                  updates    177.0 KiB
 libsemanage                      x86_64 3.7-2.fc40                  updates    293.5 KiB
 libsepol                         x86_64 3.7-2.fc40                  updates    817.9 KiB
 libsmartcols                     x86_64 2.40.2-1.fc40               updates    180.4 KiB
 libssh                           x86_64 0.10.6-5.fc40               fedora     509.3 KiB
 libssh-config                    noarch 0.10.6-5.fc40               fedora     277.0   B
 libstdc++                        x86_64 14.2.1-3.fc40               updates      2.8 MiB
 libtasn1                         x86_64 4.19.0-6.fc40               fedora     175.7 KiB
 libtirpc                         x86_64 1.3.6-1.rc3.fc40            updates    202.7 KiB
 libtool-ltdl                     x86_64 2.4.7-10.fc40               fedora      66.2 KiB
 libunistring                     x86_64 1.1-7.fc40                  fedora       1.7 MiB
 libutempter                      x86_64 1.2.1-13.fc40               fedora      57.7 KiB
 libuuid                          x86_64 2.40.2-1.fc40               updates     37.5 KiB
 libverto                         x86_64 0.3.2-8.fc40                fedora      29.5 KiB
 libxcrypt                        x86_64 4.4.38-3.fc40               updates    268.0 KiB
 libxml2                          x86_64 2.12.9-1.fc40               updates      1.7 MiB
 libzstd                          x86_64 1.5.6-1.fc40                updates    787.9 KiB
 lua-libs                         x86_64 5.4.6-5.fc40                fedora     281.1 KiB
 lua-srpm-macros                  noarch 1-13.fc40                   fedora       1.3 KiB
 lz4-libs                         x86_64 1.9.4-6.fc40                fedora     129.4 KiB
 mpfr                             x86_64 4.2.1-4.fc40                updates    832.0 KiB
 ncurses-base                     noarch 6.4-12.20240127.fc40        fedora     326.2 KiB
 ncurses-libs                     x86_64 6.4-12.20240127.fc40        fedora     963.2 KiB
 ocaml-srpm-macros                noarch 9-3.fc40                    fedora       1.9 KiB
 openblas-srpm-macros             noarch 2-16.fc40                   fedora     104.0   B
 openldap                         x86_64 2.6.8-1.fc40                updates    640.3 KiB
 openssl-libs                     x86_64 1:3.2.2-3.fc40              updates      7.8 MiB
 p11-kit                          x86_64 0.25.5-1.fc40               updates      2.2 MiB
 p11-kit-trust                    x86_64 0.25.5-1.fc40               updates    391.4 KiB
 package-notes-srpm-macros        noarch 0.5-11.fc40                 fedora       1.6 KiB
 pam                              x86_64 1.6.1-5.fc40                updates      1.8 MiB
 pam-libs                         x86_64 1.6.1-5.fc40                updates    135.0 KiB
 pcre2                            x86_64 10.44-1.fc40                updates    653.5 KiB
 pcre2-syntax                     noarch 10.44-1.fc40                updates    251.6 KiB
 perl-srpm-macros                 noarch 1-53.fc40                   fedora     861.0   B
 pkgconf                          x86_64 2.1.1-2.fc40                updates     82.9 KiB
 pkgconf-m4                       noarch 2.1.1-2.fc40                updates     13.9 KiB
 pkgconf-pkg-config               x86_64 2.1.1-2.fc40                updates    989.0   B
 popt                             x86_64 1.19-6.fc40                 fedora     136.9 KiB
 publicsuffix-list-dafsa          noarch 20250116-1.fc40             updates     68.5 KiB
 pyproject-srpm-macros            noarch 1.16.4-1.fc40               updates      1.9 KiB
 python-srpm-macros               noarch 3.12-8.fc40                 updates     50.6 KiB
 qt5-srpm-macros                  noarch 5.15.15-1.fc40              updates    500.0   B
 qt6-srpm-macros                  noarch 6.8.1-4.fc40                updates    456.0   B
 readline                         x86_64 8.2-8.fc40                  fedora     489.2 KiB
 rpm                              x86_64 4.19.1.1-1.fc40             fedora       3.0 MiB
 rpm-build-libs                   x86_64 4.19.1.1-1.fc40             fedora     198.4 KiB
 rpm-libs                         x86_64 4.19.1.1-1.fc40             fedora     709.9 KiB
 rpm-sequoia                      x86_64 1.7.0-3.fc40                updates      2.4 MiB
 rust-srpm-macros                 noarch 26.3-1.fc40                 updates      4.8 KiB
 setup                            noarch 2.14.5-2.fc40               fedora     720.4 KiB
 sqlite-libs                      x86_64 3.45.1-2.fc40               fedora       1.4 MiB
 systemd-libs                     x86_64 255.16-1.fc40               updates      1.9 MiB
 util-linux-core                  x86_64 2.40.2-1.fc40               updates      1.5 MiB
 xxhash-libs                      x86_64 0.8.3-1.fc40                updates     90.2 KiB
 xz-libs                          x86_64 1:5.4.6-3.fc40              fedora     209.8 KiB
 zig-srpm-macros                  noarch 1-2.fc40                    fedora       1.1 KiB
 zip                              x86_64 3.0-40.fc40                 fedora     703.2 KiB
 zlib-ng-compat                   x86_64 2.1.7-2.fc40                updates    134.0 KiB
 zstd                             x86_64 1.5.6-1.fc40                updates      1.7 MiB
Installing groups:                                                                       
 Buildsystem building group                                                              

Transaction Summary:
 Installing:      153 packages

Total size of inbound packages is 53 MiB. Need to download 53 MiB.
After this operation 179 MiB will be used (install 179 MiB, remove 0 B).
[  1/153] bzip2-0:1.0.8-18.fc40.x86_64  100% |   1.1 MiB/s |  52.4 KiB |  00m00s
[  2/153] cpio-0:2.15-1.fc40.x86_64     100% |   4.3 MiB/s | 292.2 KiB |  00m00s
[  3/153] diffutils-0:3.10-5.fc40.x86_6 100% |   8.8 MiB/s | 405.6 KiB |  00m00s
[  4/153] grep-0:3.11-7.fc40.x86_64     100% |   6.4 MiB/s | 300.2 KiB |  00m00s
[  5/153] info-0:7.1-2.fc40.x86_64      100% |  12.7 MiB/s | 182.3 KiB |  00m00s
[  6/153] bash-0:5.2.26-3.fc40.x86_64   100% |  13.7 MiB/s |   1.8 MiB |  00m00s
[  7/153] gzip-0:1.13-1.fc40.x86_64     100% |   4.2 MiB/s | 170.6 KiB |  00m00s
[  8/153] patch-0:2.7.6-24.fc40.x86_64  100% |  12.8 MiB/s | 130.7 KiB |  00m00s
[  9/153] rpm-build-0:4.19.1.1-1.fc40.x 100% |   7.6 MiB/s |  78.2 KiB |  00m00s
[ 10/153] sed-0:4.9-1.fc40.x86_64       100% |  14.1 MiB/s | 318.2 KiB |  00m00s
[ 11/153] unzip-0:6.0-63.fc40.x86_64    100% |   9.5 MiB/s | 184.5 KiB |  00m00s
[ 12/153] which-0:2.21-41.fc40.x86_64   100% |   4.0 MiB/s |  41.4 KiB |  00m00s
[ 13/153] tar-2:1.35-3.fc40.x86_64      100% |  27.9 MiB/s | 856.6 KiB |  00m00s
[ 14/153] xz-1:5.4.6-3.fc40.x86_64      100% |  41.9 MiB/s | 557.4 KiB |  00m00s
[ 15/153] fedora-release-common-0:40-40 100% |  96.7 KiB/s |  21.5 KiB |  00m00s
[ 16/153] gawk-0:5.3.0-3.fc40.x86_64    100% |  42.9 MiB/s |   1.1 MiB |  00m00s
[ 17/153] glibc-minimal-langpack-0:2.39 100% | 226.1 KiB/s |  84.1 KiB |  00m00s
[ 18/153] redhat-rpm-config-0:288-1.fc4 100% | 265.7 KiB/s |  82.1 KiB |  00m00s
[ 19/153] findutils-1:4.9.0-9.fc40.x86_ 100% | 347.0 KiB/s | 491.4 KiB |  00m01s
[ 20/153] shadow-utils-2:4.15.1-4.fc40. 100% | 689.3 KiB/s |   1.3 MiB |  00m02s
[ 21/153] filesystem-0:3.18-8.fc40.x86_ 100% |   5.8 MiB/s |   1.1 MiB |  00m00s
[ 22/153] ncurses-libs-0:6.4-12.2024012 100% |  27.1 MiB/s | 332.5 KiB |  00m00s
[ 23/153] bzip2-libs-0:1.0.8-18.fc40.x8 100% |   5.0 MiB/s |  40.9 KiB |  00m00s
[ 24/153] libattr-0:2.5.2-3.fc40.x86_64 100% |   2.2 MiB/s |  18.0 KiB |  00m00s
[ 25/153] file-0:5.45-4.fc40.x86_64     100% |   6.0 MiB/s |  49.0 KiB |  00m00s
[ 26/153] popt-0:1.19-6.fc40.x86_64     100% |   7.2 MiB/s |  66.7 KiB |  00m00s
[ 27/153] readline-0:8.2-8.fc40.x86_64  100% |  11.6 MiB/s | 213.3 KiB |  00m00s
[ 28/153] rpm-0:4.19.1.1-1.fc40.x86_64  100% |  33.0 MiB/s | 540.1 KiB |  00m00s
[ 29/153] rpm-build-libs-0:4.19.1.1-1.f 100% |  10.3 MiB/s |  95.0 KiB |  00m00s
[ 30/153] rpm-libs-0:4.19.1.1-1.fc40.x8 100% |  25.1 MiB/s | 308.9 KiB |  00m00s
[ 31/153] libacl-0:2.3.2-1.fc40.x86_64  100% |   2.7 MiB/s |  24.4 KiB |  00m00s
[ 32/153] xz-libs-1:5.4.6-3.fc40.x86_64 100% |   6.7 MiB/s | 110.0 KiB |  00m00s
[ 33/153] util-linux-0:2.40.2-1.fc40.x8 100% | 685.0 KiB/s |   1.2 MiB |  00m02s
[ 34/153] gmp-1:6.2.1-8.fc40.x86_64     100% |  23.5 MiB/s | 312.5 KiB |  00m00s
[ 35/153] coreutils-0:9.4-9.fc40.x86_64 100% | 319.5 KiB/s |   1.1 MiB |  00m04s
[ 36/153] efi-srpm-macros-0:5-11.fc40.n 100% |   2.4 MiB/s |  22.3 KiB |  00m00s
[ 37/153] fonts-srpm-macros-1:2.0.5-14. 100% |   3.2 MiB/s |  26.5 KiB |  00m00s
[ 38/153] fpc-srpm-macros-0:1.3-12.fc40 100% | 870.3 KiB/s |   7.8 KiB |  00m00s
[ 39/153] gnat-srpm-macros-0:6-5.fc40.n 100% | 802.1 KiB/s |   8.8 KiB |  00m00s
[ 40/153] go-srpm-macros-0:3.5.0-1.fc40 100% |   3.0 MiB/s |  27.5 KiB |  00m00s
[ 41/153] kernel-srpm-macros-0:1.0-23.f 100% |   1.1 MiB/s |   9.7 KiB |  00m00s
[ 42/153] lua-srpm-macros-0:1-13.fc40.n 100% | 873.0 KiB/s |   8.7 KiB |  00m00s
[ 43/153] ocaml-srpm-macros-0:9-3.fc40. 100% | 907.3 KiB/s |   9.1 KiB |  00m00s
[ 44/153] openblas-srpm-macros-0:2-16.f 100% |   1.0 MiB/s |   7.5 KiB |  00m00s
[ 45/153] package-notes-srpm-macros-0:0 100% |   1.1 MiB/s |   9.9 KiB |  00m00s
[ 46/153] perl-srpm-macros-0:1-53.fc40. 100% |   1.0 MiB/s |   8.4 KiB |  00m00s
[ 47/153] zig-srpm-macros-0:1-2.fc40.no 100% | 893.2 KiB/s |   8.0 KiB |  00m00s
[ 48/153] zip-0:3.0-40.fc40.x86_64      100% |  21.5 MiB/s | 264.8 KiB |  00m00s
[ 49/153] setup-0:2.14.5-2.fc40.noarch  100% |  13.7 MiB/s | 154.7 KiB |  00m00s
[ 50/153] glibc-common-0:2.39-37.fc40.x 100% | 632.5 KiB/s | 368.8 KiB |  00m01s
[ 51/153] libcap-ng-0:0.8.4-4.fc40.x86_ 100% |   1.9 MiB/s |  32.6 KiB |  00m00s
[ 52/153] libutempter-0:1.2.1-13.fc40.x 100% |   2.9 MiB/s |  26.4 KiB |  00m00s
[ 53/153] ncurses-base-0:6.4-12.2024012 100% |   6.7 MiB/s |  88.8 KiB |  00m00s
[ 54/153] file-libs-0:5.45-4.fc40.x86_6 100% |  35.5 MiB/s | 762.7 KiB |  00m00s
[ 55/153] lua-libs-0:5.4.6-5.fc40.x86_6 100% |  14.3 MiB/s | 131.9 KiB |  00m00s
[ 56/153] sqlite-libs-0:3.45.1-2.fc40.x 100% |  49.2 MiB/s | 705.1 KiB |  00m00s
[ 57/153] util-linux-core-0:2.40.2-1.fc 100% | 444.6 KiB/s | 536.6 KiB |  00m01s
[ 58/153] coreutils-common-0:9.4-9.fc40 100% |   1.1 MiB/s |   2.1 MiB |  00m02s
[ 59/153] basesystem-0:11-20.fc40.noarc 100% | 898.6 KiB/s |   7.2 KiB |  00m00s
[ 60/153] libselinux-0:3.7-5.fc40.x86_6 100% |   1.1 MiB/s |  88.0 KiB |  00m00s
[ 61/153] libsepol-0:3.7-2.fc40.x86_64  100% |   1.1 MiB/s | 342.2 KiB |  00m00s
[ 62/153] zlib-ng-compat-0:2.1.7-2.fc40 100% | 995.9 KiB/s |  77.7 KiB |  00m00s
[ 63/153] libcap-0:2.69-8.fc40.x86_64   100% |   1.1 MiB/s |  85.7 KiB |  00m00s
[ 64/153] libzstd-0:1.5.6-1.fc40.x86_64 100% | 981.6 KiB/s | 309.2 KiB |  00m00s
[ 65/153] rpm-sequoia-0:1.7.0-3.fc40.x8 100% |   1.2 MiB/s | 902.0 KiB |  00m01s
[ 66/153] elfutils-libelf-0:0.192-7.fc4 100% | 947.7 KiB/s | 208.5 KiB |  00m00s
[ 67/153] elfutils-libs-0:0.192-7.fc40. 100% | 899.7 KiB/s | 263.6 KiB |  00m00s
[ 68/153] glibc-0:2.39-37.fc40.x86_64   100% | 646.9 KiB/s |   2.2 MiB |  00m03s
[ 69/153] elfutils-debuginfod-client-0: 100% | 636.7 KiB/s |  46.5 KiB |  00m00s
[ 70/153] glibc-gconv-extra-0:2.39-37.f 100% | 685.9 KiB/s |   1.7 MiB |  00m02s
[ 71/153] json-c-0:0.17-3.fc40.x86_64   100% |   1.2 MiB/s |  44.0 KiB |  00m00s
[ 72/153] libgcc-0:14.2.1-3.fc40.x86_64 100% | 608.7 KiB/s | 133.3 KiB |  00m00s
[ 73/153] elfutils-0:0.192-7.fc40.x86_6 100% |   1.0 MiB/s | 546.4 KiB |  00m01s
[ 74/153] jansson-0:2.13.1-9.fc40.x86_6 100% |   2.9 MiB/s |  44.2 KiB |  00m00s
[ 75/153] debugedit-0:5.0-18.fc40.x86_6 100% |   1.0 MiB/s |  80.0 KiB |  00m00s
[ 76/153] libgomp-0:14.2.1-3.fc40.x86_6 100% | 797.0 KiB/s | 353.9 KiB |  00m00s
[ 77/153] pkgconf-pkg-config-0:2.1.1-2. 100% | 131.3 KiB/s |   9.8 KiB |  00m00s
[ 78/153] pkgconf-0:2.1.1-2.fc40.x86_64 100% | 599.3 KiB/s |  43.7 KiB |  00m00s
[ 79/153] pkgconf-m4-0:2.1.1-2.fc40.noa 100% | 189.7 KiB/s |  14.0 KiB |  00m00s
[ 80/153] libpkgconf-0:2.1.1-2.fc40.x86 100% | 519.6 KiB/s |  37.9 KiB |  00m00s
[ 81/153] lz4-libs-0:1.9.4-6.fc40.x86_6 100% |   4.4 MiB/s |  67.2 KiB |  00m00s
[ 82/153] curl-0:8.6.0-10.fc40.x86_64   100% | 647.7 KiB/s | 299.2 KiB |  00m00s
[ 83/153] zstd-0:1.5.6-1.fc40.x86_64    100% | 785.9 KiB/s | 479.4 KiB |  00m01s
[ 84/153] ed-0:1.20.2-1.fc40.x86_64     100% | 561.0 KiB/s |  81.9 KiB |  00m00s
[ 85/153] pcre2-0:10.44-1.fc40.x86_64   100% | 829.1 KiB/s | 242.9 KiB |  00m00s
[ 86/153] libarchive-0:3.7.2-7.fc40.x86 100% | 697.1 KiB/s | 408.5 KiB |  00m01s
[ 87/153] forge-srpm-macros-0:0.4.0-1.f 100% | 244.0 KiB/s |  19.8 KiB |  00m00s
[ 88/153] pcre2-syntax-0:10.44-1.fc40.n 100% | 654.0 KiB/s | 149.8 KiB |  00m00s
[ 89/153] mpfr-0:4.2.1-4.fc40.x86_64    100% | 780.6 KiB/s | 348.9 KiB |  00m00s
[ 90/153] libblkid-0:2.40.2-1.fc40.x86_ 100% | 325.0 KiB/s | 124.1 KiB |  00m00s
[ 91/153] libuuid-0:2.40.2-1.fc40.x86_6 100% | 391.3 KiB/s |  28.6 KiB |  00m00s
[ 92/153] libmount-0:2.40.2-1.fc40.x86_ 100% | 535.0 KiB/s | 155.2 KiB |  00m00s
[ 93/153] libsmartcols-0:2.40.2-1.fc40. 100% | 566.3 KiB/s |  83.2 KiB |  00m00s
[ 94/153] libxcrypt-0:4.4.38-3.fc40.x86 100% | 537.4 KiB/s | 119.3 KiB |  00m00s
[ 95/153] libstdc++-0:14.2.1-3.fc40.x86 100% | 474.3 KiB/s | 886.5 KiB |  00m02s
[ 96/153] audit-libs-0:4.0.3-1.fc40.x86 100% | 407.9 KiB/s | 128.9 KiB |  00m00s
[ 97/153] systemd-libs-0:255.16-1.fc40. 100% | 678.4 KiB/s | 706.9 KiB |  00m01s
[ 98/153] authselect-libs-0:1.5.0-6.fc4 100% | 486.3 KiB/s | 217.9 KiB |  00m00s
[ 99/153] libfdisk-0:2.40.2-1.fc40.x86_ 100% | 717.7 KiB/s | 159.3 KiB |  00m00s
[100/153] authselect-0:1.5.0-6.fc40.x86 100% | 664.3 KiB/s | 145.5 KiB |  00m00s
[101/153] pam-libs-0:1.6.1-5.fc40.x86_6 100% | 724.2 KiB/s |  57.2 KiB |  00m00s
[102/153] gdbm-libs-1:1.23-6.fc40.x86_6 100% |   1.0 MiB/s |  56.2 KiB |  00m00s
[103/153] libnsl2-0:2.0.1-1.fc40.x86_64 100% |   2.6 MiB/s |  29.6 KiB |  00m00s
[104/153] libpwquality-0:1.4.5-9.fc40.x 100% |   4.9 MiB/s | 119.7 KiB |  00m00s
[105/153] cracklib-0:2.9.11-5.fc40.x86_ 100% |   8.2 MiB/s |  92.5 KiB |  00m00s
[106/153] libeconf-0:0.6.2-2.fc40.x86_6 100% | 437.8 KiB/s |  32.0 KiB |  00m00s
[107/153] libsemanage-0:3.7-2.fc40.x86_ 100% | 794.9 KiB/s | 116.1 KiB |  00m00s
[108/153] pam-0:1.6.1-5.fc40.x86_64     100% | 625.0 KiB/s | 554.4 KiB |  00m01s
[109/153] ansible-srpm-macros-0:1-16.fc 100% | 283.9 KiB/s |  20.7 KiB |  00m00s
[110/153] dwz-0:0.15-8.fc40.x86_64      100% | 627.7 KiB/s | 138.7 KiB |  00m00s
[111/153] ghc-srpm-macros-0:1.9.1-1.fc4 100% | 122.3 KiB/s |   8.9 KiB |  00m00s
[112/153] pyproject-srpm-macros-0:1.16. 100% | 191.3 KiB/s |  14.0 KiB |  00m00s
[113/153] python-srpm-macros-0:3.12-8.f 100% | 320.4 KiB/s |  23.4 KiB |  00m00s
[114/153] qt5-srpm-macros-0:5.15.15-1.f 100% | 121.9 KiB/s |   8.9 KiB |  00m00s
[115/153] qt6-srpm-macros-0:6.8.1-4.fc4 100% | 127.0 KiB/s |   9.3 KiB |  00m00s
[116/153] rust-srpm-macros-0:26.3-1.fc4 100% | 169.1 KiB/s |  12.5 KiB |  00m00s
[117/153] libtirpc-0:1.3.6-1.rc3.fc40.x 100% | 641.1 KiB/s |  94.2 KiB |  00m00s
[118/153] libcom_err-0:1.47.0-5.fc40.x8 100% |   3.1 MiB/s |  25.4 KiB |  00m00s
[119/153] gdbm-1:1.23-6.fc40.x86_64     100% |   9.3 MiB/s | 152.5 KiB |  00m00s
[120/153] ca-certificates-0:2024.2.69_v 100% | 329.9 KiB/s | 871.2 KiB |  00m03s
[121/153] crypto-policies-0:20241011-1. 100% | 250.4 KiB/s |  98.9 KiB |  00m00s
[122/153] openssl-libs-1:3.2.2-3.fc40.x 100% | 487.5 KiB/s |   2.3 MiB |  00m05s
[123/153] keyutils-libs-0:1.6.3-3.fc40. 100% | 953.6 KiB/s |  31.5 KiB |  00m00s
[124/153] libverto-0:0.3.2-8.fc40.x86_6 100% |   1.8 MiB/s |  20.5 KiB |  00m00s
[125/153] krb5-libs-0:1.21.3-2.fc40.x86 100% | 636.6 KiB/s | 759.5 KiB |  00m01s
[126/153] fedora-repos-0:40-2.noarch    100% | 129.9 KiB/s |   9.5 KiB |  00m00s
[127/153] fedora-gpg-keys-0:40-2.noarch 100% | 898.4 KiB/s | 132.1 KiB |  00m00s
[128/153] elfutils-default-yama-scope-0 100% | 170.8 KiB/s |  12.5 KiB |  00m00s
[129/153] p11-kit-0:0.25.5-1.fc40.x86_6 100% |   1.1 MiB/s | 491.2 KiB |  00m00s
[130/153] libffi-0:3.4.4-7.fc40.x86_64  100% |   2.7 MiB/s |  39.4 KiB |  00m00s
[131/153] libtasn1-0:4.19.0-6.fc40.x86_ 100% |   4.5 MiB/s |  73.7 KiB |  00m00s
[132/153] libxml2-0:2.12.9-1.fc40.x86_6 100% | 557.1 KiB/s | 688.0 KiB |  00m01s
[133/153] alternatives-0:1.27-1.fc40.x8 100% | 550.3 KiB/s |  40.7 KiB |  00m00s
[134/153] p11-kit-trust-0:0.25.5-1.fc40 100% | 891.6 KiB/s | 132.0 KiB |  00m00s
[135/153] fedora-release-0:40-40.noarch 100% | 150.0 KiB/s |  11.0 KiB |  00m00s
[136/153] binutils-0:2.41-38.fc40.x86_6 100% | 564.4 KiB/s |   6.2 MiB |  00m11s
[137/153] xxhash-libs-0:0.8.3-1.fc40.x8 100% | 517.6 KiB/s |  37.8 KiB |  00m00s
[138/153] fedora-release-identity-basic 100% | 163.0 KiB/s |  11.7 KiB |  00m00s
[139/153] libcurl-0:8.6.0-10.fc40.x86_6 100% | 590.4 KiB/s | 344.8 KiB |  00m01s
[140/153] libbrotli-0:1.1.0-3.fc40.x86_ 100% |  14.4 MiB/s | 338.4 KiB |  00m00s
[141/153] libidn2-0:2.3.7-1.fc40.x86_64 100% |  11.6 MiB/s | 118.7 KiB |  00m00s
[142/153] libpsl-0:0.21.5-3.fc40.x86_64 100% |   6.9 MiB/s |  63.9 KiB |  00m00s
[143/153] libssh-0:0.10.6-5.fc40.x86_64 100% |  18.7 MiB/s | 210.6 KiB |  00m00s
[144/153] libunistring-0:1.1-7.fc40.x86 100% |  29.6 MiB/s | 545.5 KiB |  00m00s
[145/153] libssh-config-0:0.10.6-5.fc40 100% |   1.1 MiB/s |   9.0 KiB |  00m00s
[146/153] binutils-gold-0:2.41-38.fc40. 100% | 716.8 KiB/s | 782.0 KiB |  00m01s
[147/153] publicsuffix-list-dafsa-0:202 100% | 399.9 KiB/s |  58.8 KiB |  00m00s
[148/153] libnghttp2-0:1.59.0-3.fc40.x8 100% | 512.4 KiB/s |  75.3 KiB |  00m00s
[149/153] cyrus-sasl-lib-0:2.1.28-19.fc 100% |  48.2 MiB/s | 789.3 KiB |  00m00s
[150/153] libevent-0:2.1.12-12.fc40.x86 100% |  20.9 MiB/s | 257.2 KiB |  00m00s
[151/153] libtool-ltdl-0:2.4.7-10.fc40. 100% |   4.4 MiB/s |  36.2 KiB |  00m00s
[152/153] openldap-0:2.6.8-1.fc40.x86_6 100% | 877.4 KiB/s | 255.3 KiB |  00m00s
[153/153] gdb-minimal-0:15.2-4.fc40.x86 100% |   2.6 MiB/s |   4.3 MiB |  00m02s
--------------------------------------------------------------------------------
[153/153] Total                         100% |   2.5 MiB/s |  52.8 MiB |  00m21s
Running transaction
Importing PGP key 0xA15B79CC:
 Userid     : "Fedora (40) <fedora-40-primary@fedoraproject.org>"
 Fingerprint: 115DF9AEF857853EE8445D0A0727707EA15B79CC
 From       : file:///usr/share/distribution-gpg-keys/fedora/RPM-GPG-KEY-fedora-40-primary
The key was successfully imported.
[  1/155] Verify package files          100% | 653.0   B/s | 153.0   B |  00m00s
>>> Running pre-transaction scriptlet: filesystem-0:3.18-8.fc40.x86_64
>>> Stop pre-transaction scriptlet: filesystem-0:3.18-8.fc40.x86_64
[  2/155] Prepare transaction           100% |   1.7 KiB/s | 153.0   B |  00m00s
[  3/155] Installing libgcc-0:14.2.1-3. 100% |  89.9 MiB/s | 276.3 KiB |  00m00s
>>> Running post-install scriptlet: libgcc-0:14.2.1-3.fc40.x86_64
>>> Stop post-install scriptlet: libgcc-0:14.2.1-3.fc40.x86_64
[  4/155] Installing crypto-policies-0: 100% |  14.3 MiB/s | 190.6 KiB |  00m00s
>>> Running post-install scriptlet: crypto-policies-0:20241011-1.git5930b9a.fc40
>>> Stop post-install scriptlet: crypto-policies-0:20241011-1.git5930b9a.fc40.no
[  5/155] Installing fedora-release-ide 100% | 890.6 KiB/s | 912.0   B |  00m00s
[  6/155] Installing fedora-gpg-keys-0: 100% |  16.6 MiB/s | 169.7 KiB |  00m00s
[  7/155] Installing fedora-repos-0:40- 100% |   5.6 MiB/s |   5.7 KiB |  00m00s
[  8/155] Installing fedora-release-com 100% |  11.4 MiB/s |  23.4 KiB |  00m00s
[  9/155] Installing fedora-release-0:4 100% |   0.0   B/s | 124.0   B |  00m00s
[ 10/155] Installing setup-0:2.14.5-2.f 100% |  44.3 MiB/s | 725.8 KiB |  00m00s
>>> Running post-install scriptlet: setup-0:2.14.5-2.fc40.noarch
>>> Stop post-install scriptlet: setup-0:2.14.5-2.fc40.noarch
[ 11/155] Installing filesystem-0:3.18- 100% |   1.5 MiB/s | 212.4 KiB |  00m00s
[ 12/155] Installing basesystem-0:11-20 100% |   0.0   B/s | 124.0   B |  00m00s
[ 13/155] Installing publicsuffix-list- 100% |  67.6 MiB/s |  69.2 KiB |  00m00s
[ 14/155] Installing libssh-config-0:0. 100% |   0.0   B/s | 816.0   B |  00m00s
[ 15/155] Installing rust-srpm-macros-0 100% |   0.0   B/s |   5.6 KiB |  00m00s
[ 16/155] Installing qt6-srpm-macros-0: 100% |   0.0   B/s | 732.0   B |  00m00s
[ 17/155] Installing qt5-srpm-macros-0: 100% |   0.0   B/s | 776.0   B |  00m00s
[ 18/155] Installing ghc-srpm-macros-0: 100% |   0.0   B/s |   1.0 KiB |  00m00s
[ 19/155] Installing ansible-srpm-macro 100% |  35.4 MiB/s |  36.2 KiB |  00m00s
[ 20/155] Installing pcre2-syntax-0:10. 100% | 124.1 MiB/s | 254.1 KiB |  00m00s
[ 21/155] Installing pkgconf-m4-0:2.1.1 100% |  14.0 MiB/s |  14.3 KiB |  00m00s
[ 22/155] Installing ncurses-base-0:6.4 100% |  34.3 MiB/s | 351.6 KiB |  00m00s
[ 23/155] Installing glibc-minimal-lang 100% |   0.0   B/s | 124.0   B |  00m00s
[ 24/155] Installing ncurses-libs-0:6.4 100% | 105.2 MiB/s | 969.7 KiB |  00m00s
>>> Running pre-install scriptlet: glibc-0:2.39-37.fc40.x86_64
>>> Stop pre-install scriptlet: glibc-0:2.39-37.fc40.x86_64
[ 25/155] Installing glibc-0:2.39-37.fc 100% | 105.6 MiB/s |   6.6 MiB |  00m00s
>>> Running post-install scriptlet: glibc-0:2.39-37.fc40.x86_64
>>> Stop post-install scriptlet: glibc-0:2.39-37.fc40.x86_64
[ 26/155] Installing bash-0:5.2.26-3.fc 100% | 240.0 MiB/s |   8.2 MiB |  00m00s
>>> Running post-install scriptlet: bash-0:5.2.26-3.fc40.x86_64
>>> Stop post-install scriptlet: bash-0:5.2.26-3.fc40.x86_64
[ 27/155] Installing glibc-common-0:2.3 100% | 115.2 MiB/s |   1.0 MiB |  00m00s
[ 28/155] Installing glibc-gconv-extra- 100% | 101.3 MiB/s |   7.9 MiB |  00m00s
>>> Running post-install scriptlet: glibc-gconv-extra-0:2.39-37.fc40.x86_64
>>> Stop post-install scriptlet: glibc-gconv-extra-0:2.39-37.fc40.x86_64
[ 29/155] Installing zlib-ng-compat-0:2 100% |  65.8 MiB/s | 134.8 KiB |  00m00s
[ 30/155] Installing xz-libs-1:5.4.6-3. 100% | 206.0 MiB/s | 210.9 KiB |  00m00s
[ 31/155] Installing bzip2-libs-0:1.0.8 100% |  79.9 MiB/s |  81.8 KiB |  00m00s
[ 32/155] Installing popt-0:1.19-6.fc40 100% |  28.0 MiB/s | 143.5 KiB |  00m00s
[ 33/155] Installing readline-0:8.2-8.f 100% | 160.0 MiB/s | 491.4 KiB |  00m00s
[ 34/155] Installing libzstd-0:1.5.6-1. 100% | 192.7 MiB/s | 789.2 KiB |  00m00s
[ 35/155] Installing elfutils-libelf-0: 100% | 234.0 MiB/s |   1.2 MiB |  00m00s
[ 36/155] Installing libstdc++-0:14.2.1 100% | 251.5 MiB/s |   2.8 MiB |  00m00s
[ 37/155] Installing libuuid-0:2.40.2-1 100% |  37.7 MiB/s |  38.6 KiB |  00m00s
[ 38/155] Installing libblkid-0:2.40.2- 100% | 126.8 MiB/s | 259.7 KiB |  00m00s
[ 39/155] Installing libattr-0:2.5.2-3. 100% |  28.8 MiB/s |  29.5 KiB |  00m00s
[ 40/155] Installing libacl-0:2.3.2-1.f 100% |  39.9 MiB/s |  40.8 KiB |  00m00s
[ 41/155] Installing gmp-1:6.2.1-8.fc40 100% | 194.5 MiB/s | 796.8 KiB |  00m00s
[ 42/155] Installing libxcrypt-0:4.4.38 100% | 132.2 MiB/s | 270.8 KiB |  00m00s
[ 43/155] Installing lz4-libs-0:1.9.4-6 100% | 127.4 MiB/s | 130.5 KiB |  00m00s
[ 44/155] Installing gdbm-libs-1:1.23-6 100% | 120.7 MiB/s | 123.6 KiB |  00m00s
[ 45/155] Installing libeconf-0:0.6.2-2 100% |  58.3 MiB/s |  59.6 KiB |  00m00s
[ 46/155] Installing mpfr-0:4.2.1-4.fc4 100% | 203.5 MiB/s | 833.7 KiB |  00m00s
[ 47/155] Installing gawk-0:5.3.0-3.fc4 100% | 157.1 MiB/s |   1.7 MiB |  00m00s
[ 48/155] Installing dwz-0:0.15-8.fc40. 100% | 144.7 MiB/s | 296.3 KiB |  00m00s
[ 49/155] Installing unzip-0:6.0-63.fc4 100% | 125.8 MiB/s | 386.3 KiB |  00m00s
[ 50/155] Installing file-libs-0:5.45-4 100% | 472.9 MiB/s |   9.9 MiB |  00m00s
[ 51/155] Installing file-0:5.45-4.fc40 100% | 102.6 MiB/s | 105.0 KiB |  00m00s
[ 52/155] Installing libcap-ng-0:0.8.4- 100% |  73.2 MiB/s |  75.0 KiB |  00m00s
[ 53/155] Installing audit-libs-0:4.0.3 100% | 170.6 MiB/s | 349.5 KiB |  00m00s
[ 54/155] Installing pam-libs-0:1.6.1-5 100% |  67.1 MiB/s | 137.4 KiB |  00m00s
[ 55/155] Installing libcap-0:2.69-8.fc 100% |  73.2 MiB/s | 224.8 KiB |  00m00s
[ 56/155] Installing systemd-libs-0:255 100% | 242.3 MiB/s |   1.9 MiB |  00m00s
[ 57/155] Installing lua-libs-0:5.4.6-5 100% | 137.8 MiB/s | 282.3 KiB |  00m00s
[ 58/155] Installing libsepol-0:3.7-2.f 100% | 266.5 MiB/s | 818.8 KiB |  00m00s
[ 59/155] Installing jansson-0:2.13.1-9 100% |  87.6 MiB/s |  89.7 KiB |  00m00s
[ 60/155] Installing pcre2-0:10.44-1.fc 100% | 213.2 MiB/s | 654.9 KiB |  00m00s
[ 61/155] Installing libselinux-0:3.7-5 100% |  87.0 MiB/s | 178.3 KiB |  00m00s
[ 62/155] Installing sed-0:4.9-1.fc40.x 100% | 121.3 MiB/s | 869.7 KiB |  00m00s
[ 63/155] Installing grep-0:3.11-7.fc40 100% | 111.5 MiB/s |   1.0 MiB |  00m00s
[ 64/155] Installing findutils-1:4.9.0- 100% | 122.2 MiB/s |   1.5 MiB |  00m00s
[ 65/155] Installing xz-1:5.4.6-3.fc40. 100% | 105.4 MiB/s |   2.0 MiB |  00m00s
[ 66/155] Installing libmount-0:2.40.2- 100% | 174.3 MiB/s | 356.9 KiB |  00m00s
[ 67/155] Installing libsmartcols-0:2.4 100% |  88.6 MiB/s | 181.5 KiB |  00m00s
[ 68/155] Installing libcom_err-0:1.47. 100% |  66.7 MiB/s |  68.3 KiB |  00m00s
[ 69/155] Installing libffi-0:3.4.4-7.f 100% |  81.0 MiB/s |  83.0 KiB |  00m00s
[ 70/155] Installing libtasn1-0:4.19.0- 100% |  86.7 MiB/s | 177.5 KiB |  00m00s
[ 71/155] Installing p11-kit-0:0.25.5-1 100% | 122.6 MiB/s |   2.2 MiB |  00m00s
[ 72/155] Installing alternatives-0:1.2 100% |  66.4 MiB/s |  68.0 KiB |  00m00s
[ 73/155] Installing libunistring-0:1.1 100% | 216.3 MiB/s |   1.7 MiB |  00m00s
[ 74/155] Installing libidn2-0:2.3.7-1. 100% |  54.5 MiB/s | 335.0 KiB |  00m00s
[ 75/155] Installing libpsl-0:0.21.5-3. 100% |  79.7 MiB/s |  81.6 KiB |  00m00s
[ 76/155] Installing p11-kit-trust-0:0. 100% |  18.3 MiB/s | 393.1 KiB |  00m00s
>>> Running post-install scriptlet: p11-kit-trust-0:0.25.5-1.fc40.x86_64
>>> Stop post-install scriptlet: p11-kit-trust-0:0.25.5-1.fc40.x86_64
[ 77/155] Installing util-linux-core-0: 100% |  99.0 MiB/s |   1.5 MiB |  00m00s
[ 78/155] Installing tar-2:1.35-3.fc40. 100% | 140.5 MiB/s |   3.0 MiB |  00m00s
[ 79/155] Installing libsemanage-0:3.7- 100% |  72.1 MiB/s | 295.2 KiB |  00m00s
[ 80/155] Installing shadow-utils-2:4.1 100% |  60.5 MiB/s |   4.2 MiB |  00m00s
>>> Running pre-install scriptlet: libutempter-0:1.2.1-13.fc40.x86_64
>>> Stop pre-install scriptlet: libutempter-0:1.2.1-13.fc40.x86_64
[ 81/155] Installing libutempter-0:1.2. 100% |  29.2 MiB/s |  59.7 KiB |  00m00s
[ 82/155] Installing zip-0:3.0-40.fc40. 100% | 138.1 MiB/s | 707.1 KiB |  00m00s
[ 83/155] Installing gdbm-1:1.23-6.fc40 100% |  91.0 MiB/s | 465.8 KiB |  00m00s
[ 84/155] Installing cyrus-sasl-lib-0:2 100% | 175.6 MiB/s |   2.3 MiB |  00m00s
[ 85/155] Installing zstd-0:1.5.6-1.fc4 100% | 209.5 MiB/s |   1.7 MiB |  00m00s
[ 86/155] Installing libfdisk-0:2.40.2- 100% | 118.5 MiB/s | 364.0 KiB |  00m00s
[ 87/155] Installing bzip2-0:1.0.8-18.f 100% |  47.0 MiB/s |  96.2 KiB |  00m00s
[ 88/155] Installing libxml2-0:2.12.9-1 100% | 171.2 MiB/s |   1.7 MiB |  00m00s
[ 89/155] Installing sqlite-libs-0:3.45 100% | 200.2 MiB/s |   1.4 MiB |  00m00s
[ 90/155] Installing ed-0:1.20.2-1.fc40 100% |  72.8 MiB/s | 149.2 KiB |  00m00s
[ 91/155] Installing patch-0:2.7.6-24.f 100% |  86.0 MiB/s | 264.3 KiB |  00m00s
[ 92/155] Installing elfutils-default-y 100% | 127.7 KiB/s |   2.0 KiB |  00m00s
>>> Running post-install scriptlet: elfutils-default-yama-scope-0:0.192-7.fc40.n
>>> Stop post-install scriptlet: elfutils-default-yama-scope-0:0.192-7.fc40.noar
[ 93/155] Installing cpio-0:2.15-1.fc40 100% | 110.0 MiB/s |   1.1 MiB |  00m00s
[ 94/155] Installing diffutils-0:3.10-5 100% | 132.2 MiB/s |   1.6 MiB |  00m00s
[ 95/155] Installing json-c-0:0.17-3.fc 100% |  81.7 MiB/s |  83.6 KiB |  00m00s
[ 96/155] Installing libgomp-0:14.2.1-3 100% | 170.9 MiB/s | 525.0 KiB |  00m00s
[ 97/155] Installing libpkgconf-0:2.1.1 100% |  73.5 MiB/s |  75.3 KiB |  00m00s
[ 98/155] Installing pkgconf-0:2.1.1-2. 100% |  41.7 MiB/s |  85.4 KiB |  00m00s
[ 99/155] Installing pkgconf-pkg-config 100% |   1.7 MiB/s |   1.8 KiB |  00m00s
[100/155] Installing keyutils-libs-0:1. 100% |  54.5 MiB/s |  55.8 KiB |  00m00s
[101/155] Installing libverto-0:0.3.2-8 100% |  30.5 MiB/s |  31.3 KiB |  00m00s
[102/155] Installing xxhash-libs-0:0.8. 100% |  89.5 MiB/s |  91.6 KiB |  00m00s
[103/155] Installing libbrotli-0:1.1.0- 100% | 162.5 MiB/s | 831.8 KiB |  00m00s
[104/155] Installing libnghttp2-0:1.59. 100% |  81.6 MiB/s | 167.2 KiB |  00m00s
[105/155] Installing libtool-ltdl-0:2.4 100% |  65.7 MiB/s |  67.3 KiB |  00m00s
[106/155] Installing perl-srpm-macros-0 100% |   0.0   B/s |   1.1 KiB |  00m00s
[107/155] Installing package-notes-srpm 100% |   2.0 MiB/s |   2.0 KiB |  00m00s
[108/155] Installing openblas-srpm-macr 100% |   0.0   B/s | 384.0   B |  00m00s
[109/155] Installing ocaml-srpm-macros- 100% |   0.0   B/s |   2.2 KiB |  00m00s
[110/155] Installing kernel-srpm-macros 100% |   0.0   B/s |   2.3 KiB |  00m00s
[111/155] Installing gnat-srpm-macros-0 100% |   0.0   B/s |   1.3 KiB |  00m00s
[112/155] Installing fpc-srpm-macros-0: 100% | 410.2 KiB/s | 420.0   B |  00m00s
[113/155] Installing coreutils-common-0 100% | 194.3 MiB/s |  11.5 MiB |  00m00s
[114/155] Installing openssl-libs-1:3.2 100% | 223.6 MiB/s |   7.8 MiB |  00m00s
[115/155] Installing coreutils-0:9.4-9. 100% | 114.2 MiB/s |   5.8 MiB |  00m00s
>>> Running pre-install scriptlet: ca-certificates-0:2024.2.69_v8.0.401-1.0.fc40
>>> Stop pre-install scriptlet: ca-certificates-0:2024.2.69_v8.0.401-1.0.fc40.no
[116/155] Installing ca-certificates-0: 100% |   2.1 MiB/s |   2.4 MiB |  00m01s
>>> Running post-install scriptlet: ca-certificates-0:2024.2.69_v8.0.401-1.0.fc4
>>> Stop post-install scriptlet: ca-certificates-0:2024.2.69_v8.0.401-1.0.fc40.n
[117/155] Installing krb5-libs-0:1.21.3 100% | 177.5 MiB/s |   2.3 MiB |  00m00s
[118/155] Installing libtirpc-0:1.3.6-1 100% |  99.9 MiB/s | 204.5 KiB |  00m00s
[119/155] Installing gzip-0:1.13-1.fc40 100% |  95.4 MiB/s | 390.6 KiB |  00m00s
[120/155] Installing authselect-libs-0: 100% |  81.4 MiB/s | 833.2 KiB |  00m00s
[121/155] Installing libarchive-0:3.7.2 100% | 180.6 MiB/s | 924.5 KiB |  00m00s
[122/155] Installing authselect-0:1.5.0 100% |  38.6 MiB/s | 157.9 KiB |  00m00s
[123/155] Installing cracklib-0:2.9.11- 100% |  34.9 MiB/s | 250.3 KiB |  00m00s
[124/155] Installing libpwquality-0:1.4 100% |  52.5 MiB/s | 430.1 KiB |  00m00s
[125/155] Installing libnsl2-0:2.0.1-1. 100% |  28.8 MiB/s |  59.0 KiB |  00m00s
[126/155] Installing pam-0:1.6.1-5.fc40 100% |  72.8 MiB/s |   1.8 MiB |  00m00s
[127/155] Installing libssh-0:0.10.6-5. 100% | 166.5 MiB/s | 511.4 KiB |  00m00s
[128/155] Installing rpm-sequoia-0:1.7. 100% | 266.0 MiB/s |   2.4 MiB |  00m00s
[129/155] Installing rpm-libs-0:4.19.1. 100% | 139.0 MiB/s | 711.4 KiB |  00m00s
[130/155] Installing libevent-0:2.1.12- 100% | 175.7 MiB/s | 899.4 KiB |  00m00s
[131/155] Installing openldap-0:2.6.8-1 100% | 125.8 MiB/s | 644.0 KiB |  00m00s
[132/155] Installing libcurl-0:8.6.0-10 100% | 151.9 MiB/s | 777.9 KiB |  00m00s
[133/155] Installing elfutils-libs-0:0. 100% | 131.3 MiB/s | 672.2 KiB |  00m00s
[134/155] Installing elfutils-debuginfo 100% |  26.8 MiB/s |  82.4 KiB |  00m00s
[135/155] Installing binutils-0:2.41-38 100% | 191.9 MiB/s |  26.5 MiB |  00m00s
>>> Running post-install scriptlet: binutils-0:2.41-38.fc40.x86_64
>>> Stop post-install scriptlet: binutils-0:2.41-38.fc40.x86_64
[136/155] Installing binutils-gold-0:2. 100% |  73.1 MiB/s |   2.0 MiB |  00m00s
>>> Running post-install scriptlet: binutils-gold-0:2.41-38.fc40.x86_64
>>> Stop post-install scriptlet: binutils-gold-0:2.41-38.fc40.x86_64
[137/155] Installing elfutils-0:0.192-7 100% | 166.2 MiB/s |   2.7 MiB |  00m00s
[138/155] Installing gdb-minimal-0:15.2 100% | 240.6 MiB/s |  13.0 MiB |  00m00s
[139/155] Installing debugedit-0:5.0-18 100% |  98.6 MiB/s | 202.0 KiB |  00m00s
[140/155] Installing rpm-build-libs-0:4 100% |  97.3 MiB/s | 199.2 KiB |  00m00s
[141/155] Installing curl-0:8.6.0-10.fc 100% |  26.8 MiB/s | 740.9 KiB |  00m00s
>>> Running pre-install scriptlet: rpm-0:4.19.1.1-1.fc40.x86_64
>>> Stop pre-install scriptlet: rpm-0:4.19.1.1-1.fc40.x86_64
[142/155] Installing rpm-0:4.19.1.1-1.f 100% |  82.6 MiB/s |   2.4 MiB |  00m00s
[143/155] Installing efi-srpm-macros-0: 100% |  40.2 MiB/s |  41.2 KiB |  00m00s
[144/155] Installing lua-srpm-macros-0: 100% |   1.9 MiB/s |   1.9 KiB |  00m00s
[145/155] Installing zig-srpm-macros-0: 100% |   0.0   B/s |   1.7 KiB |  00m00s
[146/155] Installing fonts-srpm-macros- 100% |  55.1 MiB/s |  56.5 KiB |  00m00s
[147/155] Installing go-srpm-macros-0:3 100% |  60.2 MiB/s |  61.6 KiB |  00m00s
[148/155] Installing forge-srpm-macros- 100% |  39.3 MiB/s |  40.3 KiB |  00m00s
[149/155] Installing python-srpm-macros 100% |  50.6 MiB/s |  51.8 KiB |  00m00s
[150/155] Installing redhat-rpm-config- 100% |  46.9 MiB/s | 191.9 KiB |  00m00s
[151/155] Installing rpm-build-0:4.19.1 100% |  44.4 MiB/s | 182.0 KiB |  00m00s
[152/155] Installing pyproject-srpm-mac 100% |   1.2 MiB/s |   2.5 KiB |  00m00s
[153/155] Installing util-linux-0:2.40. 100% |  73.5 MiB/s |   3.7 MiB |  00m00s
>>> Running post-install scriptlet: util-linux-0:2.40.2-1.fc40.x86_64
>>> Stop post-install scriptlet: util-linux-0:2.40.2-1.fc40.x86_64
[154/155] Installing which-0:2.21-41.fc 100% |  40.3 MiB/s |  82.4 KiB |  00m00s
[155/155] Installing info-0:7.1-2.fc40. 100% | 179.4 KiB/s | 358.2 KiB |  00m02s
>>> Running post-transaction scriptlet: filesystem-0:3.18-8.fc40.x86_64
>>> Stop post-transaction scriptlet: filesystem-0:3.18-8.fc40.x86_64
>>> Running post-transaction scriptlet: ca-certificates-0:2024.2.69_v8.0.401-1.0
>>> Stop post-transaction scriptlet: ca-certificates-0:2024.2.69_v8.0.401-1.0.fc
>>> Running post-transaction scriptlet: authselect-libs-0:1.5.0-6.fc40.x86_64
>>> Stop post-transaction scriptlet: authselect-libs-0:1.5.0-6.fc40.x86_64
>>> Running post-transaction scriptlet: rpm-0:4.19.1.1-1.fc40.x86_64
>>> Stop post-transaction scriptlet: rpm-0:4.19.1.1-1.fc40.x86_64
>>> Running trigger-install scriptlet: glibc-common-0:2.39-37.fc40.x86_64
>>> Stop trigger-install scriptlet: glibc-common-0:2.39-37.fc40.x86_64
>>> Running trigger-install scriptlet: info-0:7.1-2.fc40.x86_64
>>> Stop trigger-install scriptlet: info-0:7.1-2.fc40.x86_64
Finish: installing minimal buildroot with dnf5
Start: creating root cache
Finish: creating root cache
Finish: chroot init
INFO: Installed packages:
INFO: alternatives-1.27-1.fc40.x86_64
ansible-srpm-macros-1-16.fc40.noarch
audit-libs-4.0.3-1.fc40.x86_64
authselect-1.5.0-6.fc40.x86_64
authselect-libs-1.5.0-6.fc40.x86_64
basesystem-11-20.fc40.noarch
bash-5.2.26-3.fc40.x86_64
binutils-2.41-38.fc40.x86_64
binutils-gold-2.41-38.fc40.x86_64
bzip2-1.0.8-18.fc40.x86_64
bzip2-libs-1.0.8-18.fc40.x86_64
ca-certificates-2024.2.69_v8.0.401-1.0.fc40.noarch
coreutils-9.4-9.fc40.x86_64
coreutils-common-9.4-9.fc40.x86_64
cpio-2.15-1.fc40.x86_64
cracklib-2.9.11-5.fc40.x86_64
crypto-policies-20241011-1.git5930b9a.fc40.noarch
curl-8.6.0-10.fc40.x86_64
cyrus-sasl-lib-2.1.28-19.fc40.x86_64
debugedit-5.0-18.fc40.x86_64
diffutils-3.10-5.fc40.x86_64
dwz-0.15-8.fc40.x86_64
ed-1.20.2-1.fc40.x86_64
efi-srpm-macros-5-11.fc40.noarch
elfutils-0.192-7.fc40.x86_64
elfutils-debuginfod-client-0.192-7.fc40.x86_64
elfutils-default-yama-scope-0.192-7.fc40.noarch
elfutils-libelf-0.192-7.fc40.x86_64
elfutils-libs-0.192-7.fc40.x86_64
fedora-gpg-keys-40-2.noarch
fedora-release-40-40.noarch
fedora-release-common-40-40.noarch
fedora-release-identity-basic-40-40.noarch
fedora-repos-40-2.noarch
file-5.45-4.fc40.x86_64
file-libs-5.45-4.fc40.x86_64
filesystem-3.18-8.fc40.x86_64
findutils-4.9.0-9.fc40.x86_64
fonts-srpm-macros-2.0.5-14.fc40.noarch
forge-srpm-macros-0.4.0-1.fc40.noarch
fpc-srpm-macros-1.3-12.fc40.noarch
gawk-5.3.0-3.fc40.x86_64
gdb-minimal-15.2-4.fc40.x86_64
gdbm-1.23-6.fc40.x86_64
gdbm-libs-1.23-6.fc40.x86_64
ghc-srpm-macros-1.9.1-1.fc40.noarch
glibc-2.39-37.fc40.x86_64
glibc-common-2.39-37.fc40.x86_64
glibc-gconv-extra-2.39-37.fc40.x86_64
glibc-minimal-langpack-2.39-37.fc40.x86_64
gmp-6.2.1-8.fc40.x86_64
gnat-srpm-macros-6-5.fc40.noarch
go-srpm-macros-3.5.0-1.fc40.noarch
gpg-pubkey-a15b79cc-63d04c2c
grep-3.11-7.fc40.x86_64
gzip-1.13-1.fc40.x86_64
info-7.1-2.fc40.x86_64
jansson-2.13.1-9.fc40.x86_64
json-c-0.17-3.fc40.x86_64
kernel-srpm-macros-1.0-23.fc40.noarch
keyutils-libs-1.6.3-3.fc40.x86_64
krb5-libs-1.21.3-2.fc40.x86_64
libacl-2.3.2-1.fc40.x86_64
libarchive-3.7.2-7.fc40.x86_64
libattr-2.5.2-3.fc40.x86_64
libblkid-2.40.2-1.fc40.x86_64
libbrotli-1.1.0-3.fc40.x86_64
libcap-2.69-8.fc40.x86_64
libcap-ng-0.8.4-4.fc40.x86_64
libcom_err-1.47.0-5.fc40.x86_64
libcurl-8.6.0-10.fc40.x86_64
libeconf-0.6.2-2.fc40.x86_64
libevent-2.1.12-12.fc40.x86_64
libfdisk-2.40.2-1.fc40.x86_64
libffi-3.4.4-7.fc40.x86_64
libgcc-14.2.1-3.fc40.x86_64
libgomp-14.2.1-3.fc40.x86_64
libidn2-2.3.7-1.fc40.x86_64
libmount-2.40.2-1.fc40.x86_64
libnghttp2-1.59.0-3.fc40.x86_64
libnsl2-2.0.1-1.fc40.x86_64
libpkgconf-2.1.1-2.fc40.x86_64
libpsl-0.21.5-3.fc40.x86_64
libpwquality-1.4.5-9.fc40.x86_64
libselinux-3.7-5.fc40.x86_64
libsemanage-3.7-2.fc40.x86_64
libsepol-3.7-2.fc40.x86_64
libsmartcols-2.40.2-1.fc40.x86_64
libssh-0.10.6-5.fc40.x86_64
libssh-config-0.10.6-5.fc40.noarch
libstdc++-14.2.1-3.fc40.x86_64
libtasn1-4.19.0-6.fc40.x86_64
libtirpc-1.3.6-1.rc3.fc40.x86_64
libtool-ltdl-2.4.7-10.fc40.x86_64
libunistring-1.1-7.fc40.x86_64
libutempter-1.2.1-13.fc40.x86_64
libuuid-2.40.2-1.fc40.x86_64
libverto-0.3.2-8.fc40.x86_64
libxcrypt-4.4.38-3.fc40.x86_64
libxml2-2.12.9-1.fc40.x86_64
libzstd-1.5.6-1.fc40.x86_64
lua-libs-5.4.6-5.fc40.x86_64
lua-srpm-macros-1-13.fc40.noarch
lz4-libs-1.9.4-6.fc40.x86_64
mpfr-4.2.1-4.fc40.x86_64
ncurses-base-6.4-12.20240127.fc40.noarch
ncurses-libs-6.4-12.20240127.fc40.x86_64
ocaml-srpm-macros-9-3.fc40.noarch
openblas-srpm-macros-2-16.fc40.noarch
openldap-2.6.8-1.fc40.x86_64
openssl-libs-3.2.2-3.fc40.x86_64
p11-kit-0.25.5-1.fc40.x86_64
p11-kit-trust-0.25.5-1.fc40.x86_64
package-notes-srpm-macros-0.5-11.fc40.noarch
pam-1.6.1-5.fc40.x86_64
pam-libs-1.6.1-5.fc40.x86_64
patch-2.7.6-24.fc40.x86_64
pcre2-10.44-1.fc40.x86_64
pcre2-syntax-10.44-1.fc40.noarch
perl-srpm-macros-1-53.fc40.noarch
pkgconf-2.1.1-2.fc40.x86_64
pkgconf-m4-2.1.1-2.fc40.noarch
pkgconf-pkg-config-2.1.1-2.fc40.x86_64
popt-1.19-6.fc40.x86_64
publicsuffix-list-dafsa-20250116-1.fc40.noarch
pyproject-srpm-macros-1.16.4-1.fc40.noarch
python-srpm-macros-3.12-8.fc40.noarch
qt5-srpm-macros-5.15.15-1.fc40.noarch
qt6-srpm-macros-6.8.1-4.fc40.noarch
readline-8.2-8.fc40.x86_64
redhat-rpm-config-288-1.fc40.noarch
rpm-4.19.1.1-1.fc40.x86_64
rpm-build-4.19.1.1-1.fc40.x86_64
rpm-build-libs-4.19.1.1-1.fc40.x86_64
rpm-libs-4.19.1.1-1.fc40.x86_64
rpm-sequoia-1.7.0-3.fc40.x86_64
rust-srpm-macros-26.3-1.fc40.noarch
sed-4.9-1.fc40.x86_64
setup-2.14.5-2.fc40.noarch
shadow-utils-4.15.1-4.fc40.x86_64
sqlite-libs-3.45.1-2.fc40.x86_64
systemd-libs-255.16-1.fc40.x86_64
tar-1.35-3.fc40.x86_64
unzip-6.0-63.fc40.x86_64
util-linux-2.40.2-1.fc40.x86_64
util-linux-core-2.40.2-1.fc40.x86_64
which-2.21-41.fc40.x86_64
xxhash-libs-0.8.3-1.fc40.x86_64
xz-5.4.6-3.fc40.x86_64
xz-libs-5.4.6-3.fc40.x86_64
zig-srpm-macros-1-2.fc40.noarch
zip-3.0-40.fc40.x86_64
zlib-ng-compat-2.1.7-2.fc40.x86_64
zstd-1.5.6-1.fc40.x86_64
Start: buildsrpm
Start: rpmbuild -bs
Building target platforms: x86_64
Building for target x86_64
setting SOURCE_DATE_EPOCH=1738195200
Wrote: /builddir/build/SRPMS/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.src.rpm
Finish: rpmbuild -bs
INFO: chroot_scan: 1 files copied to /var/lib/copr-rpmbuild/results/chroot_scan
INFO: /var/lib/mock/fedora-40-x86_64-1738226926.124416/root/var/log/dnf5.log
INFO: chroot_scan: creating tarball /var/lib/copr-rpmbuild/results/chroot_scan.tar.gz
/bin/tar: Removing leading `/' from member names
Finish: buildsrpm
INFO: Done(/var/lib/copr-rpmbuild/workspace/workdir-b3tvont_/rebase-helper/rebase-helper.spec) Config(child) 1 minutes 10 seconds
INFO: Results and/or logs in: /var/lib/copr-rpmbuild/results
INFO: Cleaning up build root ('cleanup_on_success=True')
Start: clean chroot
INFO: unmounting tmpfs.
Finish: clean chroot
INFO: Start(/var/lib/copr-rpmbuild/results/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.src.rpm)  Config(fedora-40-x86_64)
Start(bootstrap): chroot init
INFO: mounting tmpfs at /var/lib/mock/fedora-40-x86_64-bootstrap-1738226926.124416/root.
INFO: reusing tmpfs at /var/lib/mock/fedora-40-x86_64-bootstrap-1738226926.124416/root.
INFO: calling preinit hooks
INFO: enabled root cache
INFO: enabled package manager cache
Start(bootstrap): cleaning package manager metadata
Finish(bootstrap): cleaning package manager metadata
Finish(bootstrap): chroot init
Start: chroot init
INFO: mounting tmpfs at /var/lib/mock/fedora-40-x86_64-1738226926.124416/root.
INFO: calling preinit hooks
INFO: enabled root cache
Start: unpacking root cache
Finish: unpacking root cache
INFO: enabled package manager cache
Start: cleaning package manager metadata
Finish: cleaning package manager metadata
INFO: enabled HW Info plugin
INFO: Buildroot is handled by package management downloaded with a bootstrap image:
  rpm-4.19.1.1-1.fc40.x86_64
  rpm-sequoia-1.7.0-3.fc40.x86_64
  python3-dnf-4.22.0-1.fc40.noarch
  yum-4.22.0-1.fc40.noarch
  dnf5-5.1.17-3.fc40.x86_64
  dnf5-plugins-5.1.17-3.fc40.x86_64
Finish: chroot init
Start: build phase for rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.src.rpm
Start: build setup for rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.src.rpm
Building target platforms: x86_64
Building for target x86_64
setting SOURCE_DATE_EPOCH=1738195200
Wrote: /builddir/build/SRPMS/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.src.rpm
Updating and loading repositories:
 updates                                100% | 873.6 KiB/s |  29.7 KiB |  00m00s
 fedora                                 100% |   1.0 MiB/s |  32.2 KiB |  00m00s
 Copr repository                        100% |  32.8 KiB/s |   1.5 KiB |  00m00s
Repositories loaded.
Package                         Arch   Version                        Repository      Size
Installing:                                                                               
 make                           x86_64 1:4.4.1-6.fc40                 fedora       1.8 MiB
 pandoc                         x86_64 3.1.3-29.fc40                  fedora     190.2 MiB
 python3-devel                  x86_64 3.12.8-2.fc40                  updates      1.3 MiB
 python3-sphinx                 noarch 1:7.2.6-6.fc40                 fedora      10.8 MiB
 python3-sphinx_rtd_theme       noarch 2.0.0-3.fc40                   fedora     317.9 KiB
Installing dependencies:                                                                  
 expat                          x86_64 2.6.3-1.fc40                   updates    287.5 KiB
 fontawesome4-fonts             noarch 1:4.7.0-22.fc40                fedora     296.6 KiB
 fonts-filesystem               noarch 1:2.0.5-14.fc40                fedora       0.0   B
 gc                             x86_64 8.2.2-6.fc40                   fedora     258.7 KiB
 google-roboto-slab-fonts       noarch 1.100263-0.23.20150923git.fc40 fedora     699.6 KiB
 guile30                        x86_64 3.0.7-12.fc40                  fedora      51.5 MiB
 lato-fonts                     noarch 2.015-20.fc40                  fedora      11.3 MiB
 libb2                          x86_64 0.98.1-11.fc40                 fedora      42.2 KiB
 libyaml                        x86_64 0.2.5-14.fc40                  fedora     130.4 KiB
 mpdecimal                      x86_64 2.5.1-9.fc40                   fedora     200.9 KiB
 pandoc-common                  noarch 3.1.3-29.fc40                  fedora       1.9 MiB
 pyproject-rpm-macros           noarch 1.16.4-1.fc40                  updates    113.0 KiB
 python-pip-wheel               noarch 23.3.2-2.fc40                  updates      1.5 MiB
 python-rpm-macros              noarch 3.12-8.fc40                    updates     22.1 KiB
 python3                        x86_64 3.12.8-2.fc40                  updates     31.5 KiB
 python3-babel                  noarch 2.16.0-1.fc40                  updates     28.3 MiB
 python3-charset-normalizer     noarch 3.3.2-3.fc40                   fedora     312.7 KiB
 python3-docutils               noarch 0.20.1-3.fc40                  fedora       4.8 MiB
 python3-idna                   noarch 3.7-1.fc40                     updates    594.6 KiB
 python3-imagesize              noarch 1.4.1-7.fc40                   fedora      34.7 KiB
 python3-jinja2                 noarch 3.1.5-1.fc40                   updates      2.9 MiB
 python3-libs                   x86_64 3.12.8-2.fc40                  updates     41.3 MiB
 python3-markupsafe             x86_64 2.1.3-4.fc40                   fedora      56.3 KiB
 python3-packaging              noarch 23.2-4.fc40                    fedora     421.1 KiB
 python3-pygments               noarch 2.17.2-3.fc40                  fedora      10.3 MiB
 python3-requests               noarch 2.31.0-3.fc40                  fedora     462.4 KiB
 python3-rpm-generators         noarch 14-10.fc40                     fedora      81.7 KiB
 python3-rpm-macros             noarch 3.12-8.fc40                    updates      6.4 KiB
 python3-snowballstemmer        noarch 2.2.0-10.fc40                  fedora       1.7 MiB
 python3-sphinx-theme-alabaster noarch 0.7.16-3.fc40                  fedora      41.9 KiB
 python3-sphinxcontrib-jquery   noarch 4.1-7.fc40                     fedora     381.8 KiB
 python3-urllib3                noarch 1.26.20-1.fc40                 updates    999.0 KiB
 tzdata                         noarch 2024b-1.fc40                   updates      1.6 MiB

Transaction Summary:
 Installing:       38 packages

Total size of inbound packages is 65 MiB. Need to download 65 MiB.
After this operation 367 MiB will be used (install 367 MiB, remove 0 B).
[ 1/38] make-1:4.4.1-6.fc40.x86_64      100% |   2.8 MiB/s | 587.6 KiB |  00m00s
[ 2/38] python3-sphinx-1:7.2.6-6.fc40.n 100% |   8.9 MiB/s |   2.6 MiB |  00m00s
[ 3/38] python3-sphinx_rtd_theme-0:2.0. 100% | 932.6 KiB/s |  84.9 KiB |  00m00s
[ 4/38] guile30-0:3.0.7-12.fc40.x86_64  100% |  25.7 MiB/s |   8.1 MiB |  00m00s
[ 5/38] libyaml-0:0.2.5-14.fc40.x86_64  100% | 870.5 KiB/s |  59.2 KiB |  00m00s
[ 6/38] pandoc-common-0:3.1.3-29.fc40.n 100% |   4.4 MiB/s | 603.9 KiB |  00m00s
[ 7/38] python3-docutils-0:0.20.1-3.fc4 100% |  14.7 MiB/s |   1.0 MiB |  00m00s
[ 8/38] python3-imagesize-0:1.4.1-7.fc4 100% | 509.5 KiB/s |  21.9 KiB |  00m00s
[ 9/38] python3-packaging-0:23.2-4.fc40 100% |   2.6 MiB/s | 125.2 KiB |  00m00s
[10/38] python3-pygments-0:2.17.2-3.fc4 100% |  21.3 MiB/s |   2.5 MiB |  00m00s
[11/38] python3-devel-0:3.12.8-2.fc40.x 100% | 383.2 KiB/s | 313.8 KiB |  00m01s
[12/38] python3-requests-0:2.31.0-3.fc4 100% |   3.4 MiB/s | 151.7 KiB |  00m00s
[13/38] python3-snowballstemmer-0:2.2.0 100% |   4.0 MiB/s | 257.2 KiB |  00m00s
[14/38] python3-sphinx-theme-alabaster- 100% | 690.0 KiB/s |  28.3 KiB |  00m00s
[15/38] google-roboto-slab-fonts-0:1.10 100% |   2.3 MiB/s | 238.8 KiB |  00m00s
[16/38] fontawesome4-fonts-1:4.7.0-22.f 100% |   1.5 MiB/s | 204.3 KiB |  00m00s
[17/38] python3-sphinxcontrib-jquery-0: 100% |   1.7 MiB/s | 113.8 KiB |  00m00s
[18/38] lato-fonts-0:2.015-20.fc40.noar 100% |  14.7 MiB/s |   3.1 MiB |  00m00s
[19/38] gc-0:8.2.2-6.fc40.x86_64        100% |   2.6 MiB/s | 110.2 KiB |  00m00s
[20/38] python3-charset-normalizer-0:3. 100% |   2.4 MiB/s | 107.3 KiB |  00m00s
[21/38] fonts-filesystem-1:2.0.5-14.fc4 100% | 209.1 KiB/s |   8.2 KiB |  00m00s
[22/38] libb2-0:0.98.1-11.fc40.x86_64   100% | 653.1 KiB/s |  25.5 KiB |  00m00s
[23/38] mpdecimal-0:2.5.1-9.fc40.x86_64 100% |   2.2 MiB/s |  88.6 KiB |  00m00s
[24/38] pyproject-rpm-macros-0:1.16.4-1 100% |  47.7 KiB/s |  44.5 KiB |  00m01s
[25/38] python-rpm-macros-0:3.12-8.fc40 100% |  27.1 KiB/s |  17.5 KiB |  00m01s
[26/38] python3-rpm-macros-0:3.12-8.fc4 100% |  50.5 KiB/s |  12.3 KiB |  00m00s
[27/38] python3-rpm-generators-0:14-10. 100% | 493.4 KiB/s |  29.6 KiB |  00m00s
[28/38] python3-0:3.12.8-2.fc40.x86_64  100% |  88.5 KiB/s |  28.0 KiB |  00m00s
[29/38] pandoc-0:3.1.3-29.fc40.x86_64   100% |   5.7 MiB/s |  25.7 MiB |  00m05s
[30/38] python3-jinja2-0:3.1.5-1.fc40.n 100% | 610.7 KiB/s | 487.4 KiB |  00m01s
[31/38] python3-markupsafe-0:2.1.3-4.fc 100% | 501.3 KiB/s |  30.1 KiB |  00m00s
[32/38] python3-idna-0:3.7-1.fc40.noarc 100% |   1.4 MiB/s | 118.9 KiB |  00m00s
[33/38] python3-urllib3-0:1.26.20-1.fc4 100% |   3.2 MiB/s | 273.9 KiB |  00m00s
[34/38] expat-0:2.6.3-1.fc40.x86_64     100% |   1.4 MiB/s | 114.1 KiB |  00m00s
[35/38] python-pip-wheel-0:23.3.2-2.fc4 100% |   3.5 MiB/s |   1.5 MiB |  00m00s
[36/38] tzdata-0:2024b-1.fc40.noarch    100% |   4.2 MiB/s | 713.5 KiB |  00m00s
[37/38] python3-libs-0:3.12.8-2.fc40.x8 100% |   1.4 MiB/s |   9.1 MiB |  00m07s
[38/38] python3-babel-0:2.16.0-1.fc40.n 100% | 876.8 KiB/s |   6.5 MiB |  00m08s
--------------------------------------------------------------------------------
[38/38] Total                           100% |   5.6 MiB/s |  65.1 MiB |  00m12s
Running transaction
[ 1/40] Verify package files            100% | 145.0   B/s |  38.0   B |  00m00s
[ 2/40] Prepare transaction             100% | 383.0   B/s |  38.0   B |  00m00s
[ 3/40] Installing python-rpm-macros-0: 100% |  22.3 MiB/s |  22.8 KiB |  00m00s
[ 4/40] Installing fonts-filesystem-1:2 100% | 769.5 KiB/s | 788.0   B |  00m00s
[ 5/40] Installing python3-rpm-macros-0 100% |   0.0   B/s |   6.7 KiB |  00m00s
[ 6/40] Installing pyproject-rpm-macros 100% | 112.3 MiB/s | 115.0 KiB |  00m00s
[ 7/40] Installing fontawesome4-fonts-1 100% | 145.4 MiB/s | 297.8 KiB |  00m00s
[ 8/40] Installing google-roboto-slab-f 100% | 228.3 MiB/s | 701.4 KiB |  00m00s
[ 9/40] Installing lato-fonts-0:2.015-2 100% |  39.8 MiB/s |  11.3 MiB |  00m00s
[10/40] Installing tzdata-0:2024b-1.fc4 100% |  12.2 MiB/s |   1.8 MiB |  00m00s
[11/40] Installing python-pip-wheel-0:2 100% | 169.6 MiB/s |   1.5 MiB |  00m00s
[12/40] Installing expat-0:2.6.3-1.fc40 100% |  94.3 MiB/s | 289.6 KiB |  00m00s
[13/40] Installing mpdecimal-0:2.5.1-9. 100% |  13.2 MiB/s | 202.0 KiB |  00m00s
[14/40] Installing libb2-0:0.98.1-11.fc 100% |  21.1 MiB/s |  43.3 KiB |  00m00s
[15/40] Installing python3-0:3.12.8-2.f 100% |   3.0 MiB/s |  33.3 KiB |  00m00s
[16/40] Installing python3-libs-0:3.12. 100% |  38.8 MiB/s |  41.7 MiB |  00m01s
[17/40] Installing python3-docutils-0:0 100% |  31.1 MiB/s |   4.9 MiB |  00m00s
[18/40] Installing python3-packaging-0: 100% |  22.2 MiB/s | 431.9 KiB |  00m00s
[19/40] Installing python3-idna-0:3.7-1 100% |  73.4 MiB/s | 600.9 KiB |  00m00s
[20/40] Installing python3-urllib3-0:1. 100% |  58.9 MiB/s |   1.0 MiB |  00m00s
[21/40] Installing python3-rpm-generato 100% |  81.0 MiB/s |  82.9 KiB |  00m00s
[22/40] Installing python3-imagesize-0: 100% |   7.4 MiB/s |  37.8 KiB |  00m00s
[23/40] Installing python3-pygments-0:2 100% |  96.7 MiB/s |  10.5 MiB |  00m00s
[24/40] Installing python3-snowballstem 100% |  29.9 MiB/s |   1.7 MiB |  00m00s
[25/40] Installing python3-sphinx-theme 100% |  15.1 MiB/s |  46.3 KiB |  00m00s
[26/40] Installing python3-charset-norm 100% |  63.0 MiB/s | 322.7 KiB |  00m00s
[27/40] Installing python3-requests-0:2 100% |  46.3 MiB/s | 474.5 KiB |  00m00s
[28/40] Installing python3-babel-0:2.16 100% |  48.6 MiB/s |  28.5 MiB |  00m01s
[29/40] Installing python3-markupsafe-0 100% |  11.8 MiB/s |  60.4 KiB |  00m00s
[30/40] Installing python3-jinja2-0:3.1 100% | 121.3 MiB/s |   2.9 MiB |  00m00s
[31/40] Installing python3-sphinx-1:7.2 100% |  31.7 MiB/s |  11.0 MiB |  00m00s
[32/40] Installing python3-sphinxcontri 100% | 125.3 MiB/s | 385.0 KiB |  00m00s
[33/40] Installing gc-0:8.2.2-6.fc40.x8 100% |  51.0 MiB/s | 261.2 KiB |  00m00s
[34/40] Installing guile30-0:3.0.7-12.f 100% |  91.6 MiB/s |  51.6 MiB |  00m01s
[35/40] Installing pandoc-common-0:3.1. 100% |  27.2 MiB/s |   1.9 MiB |  00m00s
[36/40] Installing libyaml-0:0.2.5-14.f 100% |  42.9 MiB/s | 131.8 KiB |  00m00s
[37/40] Installing pandoc-0:3.1.3-29.fc 100% |  87.1 MiB/s | 190.2 MiB |  00m02s
[38/40] Installing make-1:4.4.1-6.fc40. 100% |  85.7 MiB/s |   1.8 MiB |  00m00s
[39/40] Installing python3-sphinx_rtd_t 100% |  23.6 MiB/s | 338.4 KiB |  00m00s
[40/40] Installing python3-devel-0:3.12 100% |  10.1 MiB/s |   1.3 MiB |  00m00s
>>> Running trigger-install scriptlet: glibc-common-0:2.39-37.fc40.x86_64
>>> Stop trigger-install scriptlet: glibc-common-0:2.39-37.fc40.x86_64
>>> Running trigger-install scriptlet: info-0:7.1-2.fc40.x86_64
>>> Stop trigger-install scriptlet: info-0:7.1-2.fc40.x86_64
Finish: build setup for rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.src.rpm
Start: rpmbuild rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.src.rpm
Building target platforms: x86_64
Building for target x86_64
setting SOURCE_DATE_EPOCH=1738195200
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.BtmifS
+ umask 022
+ cd /builddir/build/BUILD
+ cd /builddir/build/BUILD
+ rm -rf rebasehelper-0.29.2.post1.dev2+gcb25188
+ /usr/lib/rpm/rpmuncompress -x /builddir/build/SOURCES/rebasehelper-0.29.2.post1.dev2+gcb25188.tar.gz
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd rebasehelper-0.29.2.post1.dev2+gcb25188
+ rm -rf /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188-SPECPARTS
+ /usr/bin/mkdir -p /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188-SPECPARTS
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ sed -i 's/setuptools_scm\[toml\]>=7/setuptools_scm[toml]/' pyproject.toml
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%generate_buildrequires): /bin/sh -e /var/tmp/rpm-tmp.jYx7bh
+ umask 022
+ cd /builddir/build/BUILD
+ cd rebasehelper-0.29.2.post1.dev2+gcb25188
+ echo pyproject-rpm-macros
+ echo python3-devel
+ echo 'python3dist(packaging)'
+ echo 'python3dist(pip) >= 19'
+ '[' -f pyproject.toml ']'
+ echo '(python3dist(tomli) if python3-devel < 3.11)'
+ rm -rfv '*.dist-info/'
+ '[' -f /usr/bin/python3 ']'
+ mkdir -p /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/.pyproject-builddir
+ echo -n
+ CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ VALAFLAGS=-g
+ RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Cforce-frame-pointers=yes --cap-lints=warn'
+ LDFLAGS='-Wl,-z,relro -Wl,--as-needed  -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -Wl,--build-id=sha1  '
+ LT_SYS_LIBRARY_PATH=/usr/lib64:
+ CC=gcc
+ CXX=g++
+ TMPDIR=/builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/.pyproject-builddir
+ RPM_TOXENV=py312
+ HOSTNAME=rpmbuild
+ /usr/bin/python3 -Bs /usr/lib/rpm/redhat/pyproject_buildrequires.py --generate-extras --python3_pkgversion 3 --wheeldir /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/pyproject-wheeldir --output /builddir/build/BUILD/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64-pyproject-buildrequires -x testing
Handling setuptools>=45 from build-system.requires
Requirement not satisfied: setuptools>=45
Handling setuptools_scm[toml] from build-system.requires
Requirement not satisfied: setuptools_scm[toml]
Exiting dependency generation pass: build backend
+ cat /builddir/build/BUILD/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64-pyproject-buildrequires
+ rm -rfv '*.dist-info/'
+ RPM_EC=0
++ jobs -p
+ exit 0
Wrote: /builddir/build/SRPMS/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.buildreqs.nosrc.rpm
INFO: Going to install missing dynamic buildrequires
Updating and loading repositories:
 updates                                100% | 781.7 KiB/s |  29.7 KiB |  00m00s
 fedora                                 100% |   1.2 MiB/s |  32.2 KiB |  00m00s
 Copr repository                        100% |  31.4 KiB/s |   1.5 KiB |  00m00s
Repositories loaded.
Package "make-1:4.4.1-6.fc40.x86_64" is already installed.
Package "pandoc-3.1.3-29.fc40.x86_64" is already installed.
Package "pyproject-rpm-macros-1.16.4-1.fc40.noarch" is already installed.
Package "python3-devel-3.12.8-2.fc40.x86_64" is already installed.
Package "python3-sphinx-1:7.2.6-6.fc40.noarch" is already installed.
Package "python3-sphinx_rtd_theme-2.0.0-3.fc40.noarch" is already installed.
Package "python3-packaging-23.2-4.fc40.noarch" is already installed.

Package                      Arch   Version       Repository      Size
Installing:                                                           
 python3-pip                 noarch 23.3.2-2.fc40 updates     14.2 MiB
 python3-setuptools          noarch 69.0.3-4.fc40 updates      7.1 MiB
 python3-setuptools_scm      noarch 8.0.4-3.fc40  fedora     307.7 KiB
 python3-setuptools_scm+toml noarch 8.0.4-3.fc40  fedora       9.0 KiB
Installing dependencies:                                              
 python3-typing-extensions   noarch 4.12.2-2.fc40 updates    458.4 KiB

Transaction Summary:
 Installing:        5 packages

Total size of inbound packages is 5 MiB. Need to download 5 MiB.
After this operation 22 MiB will be used (install 22 MiB, remove 0 B).
[1/5] python3-setuptools_scm+toml-0:8.0 100% |  63.2 KiB/s |   9.8 KiB |  00m00s
[2/5] python3-setuptools_scm-0:8.0.4-3. 100% | 313.1 KiB/s | 113.7 KiB |  00m00s
[3/5] python3-pip-0:23.3.2-2.fc40.noarc 100% |   7.7 MiB/s |   3.2 MiB |  00m00s
[4/5] python3-setuptools-0:69.0.3-4.fc4 100% |   4.7 MiB/s |   1.5 MiB |  00m00s
[5/5] python3-typing-extensions-0:4.12. 100% | 436.2 KiB/s |  89.0 KiB |  00m00s
--------------------------------------------------------------------------------
[5/5] Total                             100% |   7.7 MiB/s |   4.9 MiB |  00m01s
Running transaction
[1/7] Verify package files              100% | 312.0   B/s |   5.0   B |  00m00s
[2/7] Prepare transaction               100% | 147.0   B/s |   5.0   B |  00m00s
[3/7] Installing python3-typing-extensi 100% |  90.0 MiB/s | 460.8 KiB |  00m00s
[4/7] Installing python3-setuptools-0:6 100% | 110.6 MiB/s |   7.3 MiB |  00m00s
[5/7] Installing python3-setuptools_scm 100% |  45.6 MiB/s | 326.9 KiB |  00m00s
[6/7] Installing python3-setuptools_scm 100% |  30.3 KiB/s | 124.0   B |  00m00s
[7/7] Installing python3-pip-0:23.3.2-2 100% |  87.4 MiB/s |  14.5 MiB |  00m00s
>>> Running trigger-install scriptlet: glibc-common-0:2.39-37.fc40.x86_64
>>> Stop trigger-install scriptlet: glibc-common-0:2.39-37.fc40.x86_64
Building target platforms: x86_64
Building for target x86_64
setting SOURCE_DATE_EPOCH=1738195200
Executing(%generate_buildrequires): /bin/sh -e /var/tmp/rpm-tmp.9TveJ1
+ umask 022
+ cd /builddir/build/BUILD
+ cd rebasehelper-0.29.2.post1.dev2+gcb25188
+ echo pyproject-rpm-macros
+ echo python3-devel
+ echo 'python3dist(packaging)'
+ echo 'python3dist(pip) >= 19'
+ '[' -f pyproject.toml ']'
+ echo '(python3dist(tomli) if python3-devel < 3.11)'
+ rm -rfv '*.dist-info/'
+ '[' -f /usr/bin/python3 ']'
+ mkdir -p /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/.pyproject-builddir
+ echo -n
+ CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ VALAFLAGS=-g
+ RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Cforce-frame-pointers=yes --cap-lints=warn'
+ LDFLAGS='-Wl,-z,relro -Wl,--as-needed  -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -Wl,--build-id=sha1  '
+ LT_SYS_LIBRARY_PATH=/usr/lib64:
+ CC=gcc
+ CXX=g++
+ TMPDIR=/builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/.pyproject-builddir
+ RPM_TOXENV=py312
+ HOSTNAME=rpmbuild
+ /usr/bin/python3 -Bs /usr/lib/rpm/redhat/pyproject_buildrequires.py --generate-extras --python3_pkgversion 3 --wheeldir /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/pyproject-wheeldir --output /builddir/build/BUILD/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64-pyproject-buildrequires -x testing
Handling setuptools>=45 from build-system.requires
Requirement satisfied: setuptools>=45
   (installed: setuptools 69.0.3)
Handling setuptools_scm[toml] from build-system.requires
Requirement satisfied: setuptools_scm[toml]
   (installed: setuptools_scm 8.0.4)
   (extras are currently not checked)
/usr/lib/python3.12/site-packages/setuptools_scm/git.py:308: UserWarning: git archive did not support describe output
  warnings.warn("git archive did not support describe output")
/usr/lib/python3.12/site-packages/setuptools_scm/git.py:327: UserWarning: unprocessed git archival found (no export subst applied)
  warnings.warn("unprocessed git archival found (no export subst applied)")
running egg_info
writing rebasehelper.egg-info/PKG-INFO
writing dependency_links to rebasehelper.egg-info/dependency_links.txt
writing entry points to rebasehelper.egg-info/entry_points.txt
writing requirements to rebasehelper.egg-info/requires.txt
writing top-level names to rebasehelper.egg-info/top_level.txt
reading manifest file 'rebasehelper.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
warning: no previously-included files matching '*.pyc' found anywhere in distribution
adding license file 'LICENSE'
writing manifest file 'rebasehelper.egg-info/SOURCES.txt'
Handling wheel from get_requires_for_build_wheel
Requirement not satisfied: wheel
Exiting dependency generation pass: get_requires_for_build_wheel
+ cat /builddir/build/BUILD/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64-pyproject-buildrequires
+ rm -rfv '*.dist-info/'
+ RPM_EC=0
++ jobs -p
+ exit 0
Wrote: /builddir/build/SRPMS/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.buildreqs.nosrc.rpm
INFO: Going to install missing dynamic buildrequires
Updating and loading repositories:
 updates                                100% | 928.2 KiB/s |  29.7 KiB |  00m00s
 fedora                                 100% |   1.1 MiB/s |  32.2 KiB |  00m00s
 Copr repository                        100% |  50.3 KiB/s |   1.5 KiB |  00m00s
Repositories loaded.
Package "make-1:4.4.1-6.fc40.x86_64" is already installed.
Package "pandoc-3.1.3-29.fc40.x86_64" is already installed.
Package "pyproject-rpm-macros-1.16.4-1.fc40.noarch" is already installed.
Package "python3-devel-3.12.8-2.fc40.x86_64" is already installed.
Package "python3-sphinx-1:7.2.6-6.fc40.noarch" is already installed.
Package "python3-sphinx_rtd_theme-2.0.0-3.fc40.noarch" is already installed.
Package "python3-packaging-23.2-4.fc40.noarch" is already installed.
Package "python3-pip-23.3.2-2.fc40.noarch" is already installed.
Package "python3-setuptools-69.0.3-4.fc40.noarch" is already installed.
Package "python3-setuptools_scm-8.0.4-3.fc40.noarch" is already installed.
Package "python3-setuptools_scm+toml-8.0.4-3.fc40.noarch" is already installed.

Package        Arch   Version         Repository      Size
Installing:                                               
 python3-wheel noarch 1:0.41.2-3.fc40 fedora     507.1 KiB

Transaction Summary:
 Installing:        1 packages

Total size of inbound packages is 163 KiB. Need to download 163 KiB.
After this operation 507 KiB will be used (install 507 KiB, remove 0 B).
[1/1] python3-wheel-1:0.41.2-3.fc40.noa 100% | 670.4 KiB/s | 162.9 KiB |  00m00s
--------------------------------------------------------------------------------
[1/1] Total                             100% | 592.4 KiB/s | 162.9 KiB |  00m00s
Running transaction
[1/3] Verify package files              100% |   0.0   B/s |   1.0   B |  00m00s
[2/3] Prepare transaction               100% | 111.0   B/s |   1.0   B |  00m00s
[3/3] Installing python3-wheel-1:0.41.2 100% |  14.7 MiB/s | 526.1 KiB |  00m00s
>>> Running trigger-install scriptlet: glibc-common-0:2.39-37.fc40.x86_64
>>> Stop trigger-install scriptlet: glibc-common-0:2.39-37.fc40.x86_64
Building target platforms: x86_64
Building for target x86_64
setting SOURCE_DATE_EPOCH=1738195200
Executing(%generate_buildrequires): /bin/sh -e /var/tmp/rpm-tmp.ZqtBTK
+ umask 022
+ cd /builddir/build/BUILD
+ cd rebasehelper-0.29.2.post1.dev2+gcb25188
+ echo pyproject-rpm-macros
+ echo python3-devel
+ echo 'python3dist(packaging)'
+ echo 'python3dist(pip) >= 19'
+ '[' -f pyproject.toml ']'
+ echo '(python3dist(tomli) if python3-devel < 3.11)'
+ rm -rfv '*.dist-info/'
+ '[' -f /usr/bin/python3 ']'
+ mkdir -p /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/.pyproject-builddir
+ echo -n
+ CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ VALAFLAGS=-g
+ RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Cforce-frame-pointers=yes --cap-lints=warn'
+ LDFLAGS='-Wl,-z,relro -Wl,--as-needed  -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -Wl,--build-id=sha1  '
+ LT_SYS_LIBRARY_PATH=/usr/lib64:
+ CC=gcc
+ CXX=g++
+ TMPDIR=/builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/.pyproject-builddir
+ RPM_TOXENV=py312
+ HOSTNAME=rpmbuild
+ /usr/bin/python3 -Bs /usr/lib/rpm/redhat/pyproject_buildrequires.py --generate-extras --python3_pkgversion 3 --wheeldir /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/pyproject-wheeldir --output /builddir/build/BUILD/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64-pyproject-buildrequires -x testing
Handling setuptools>=45 from build-system.requires
Requirement satisfied: setuptools>=45
   (installed: setuptools 69.0.3)
Handling setuptools_scm[toml] from build-system.requires
Requirement satisfied: setuptools_scm[toml]
   (installed: setuptools_scm 8.0.4)
   (extras are currently not checked)
/usr/lib/python3.12/site-packages/setuptools_scm/git.py:308: UserWarning: git archive did not support describe output
  warnings.warn("git archive did not support describe output")
/usr/lib/python3.12/site-packages/setuptools_scm/git.py:327: UserWarning: unprocessed git archival found (no export subst applied)
  warnings.warn("unprocessed git archival found (no export subst applied)")
running egg_info
writing rebasehelper.egg-info/PKG-INFO
writing dependency_links to rebasehelper.egg-info/dependency_links.txt
writing entry points to rebasehelper.egg-info/entry_points.txt
writing requirements to rebasehelper.egg-info/requires.txt
writing top-level names to rebasehelper.egg-info/top_level.txt
reading manifest file 'rebasehelper.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
warning: no previously-included files matching '*.pyc' found anywhere in distribution
adding license file 'LICENSE'
writing manifest file 'rebasehelper.egg-info/SOURCES.txt'
Handling wheel from get_requires_for_build_wheel
Requirement satisfied: wheel
   (installed: wheel 0.41.2)
/usr/lib/python3.12/site-packages/setuptools_scm/git.py:308: UserWarning: git archive did not support describe output
  warnings.warn("git archive did not support describe output")
/usr/lib/python3.12/site-packages/setuptools_scm/git.py:327: UserWarning: unprocessed git archival found (no export subst applied)
  warnings.warn("unprocessed git archival found (no export subst applied)")
running dist_info
writing rebasehelper.egg-info/PKG-INFO
writing dependency_links to rebasehelper.egg-info/dependency_links.txt
writing entry points to rebasehelper.egg-info/entry_points.txt
writing requirements to rebasehelper.egg-info/requires.txt
writing top-level names to rebasehelper.egg-info/top_level.txt
reading manifest file 'rebasehelper.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
warning: no previously-included files matching '*.pyc' found anywhere in distribution
adding license file 'LICENSE'
writing manifest file 'rebasehelper.egg-info/SOURCES.txt'
creating '/builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info'
Handling ansicolors from hook generated metadata: Requires-Dist (rebasehelper)
Requirement not satisfied: ansicolors
Handling copr from hook generated metadata: Requires-Dist (rebasehelper)
Requirement not satisfied: copr
Handling pyquery from hook generated metadata: Requires-Dist (rebasehelper)
Requirement not satisfied: pyquery
Handling python-pam from hook generated metadata: Requires-Dist (rebasehelper)
Requirement not satisfied: python-pam
Handling requests from hook generated metadata: Requires-Dist (rebasehelper)
Requirement satisfied: requests
   (installed: requests 2.31.0)
Handling rpkg from hook generated metadata: Requires-Dist (rebasehelper)
Requirement not satisfied: rpkg
Handling unidiff from hook generated metadata: Requires-Dist (rebasehelper)
Requirement not satisfied: unidiff
Handling GitPython from hook generated metadata: Requires-Dist (rebasehelper)
Requirement not satisfied: GitPython
Handling specfile from hook generated metadata: Requires-Dist (rebasehelper)
Requirement not satisfied: specfile
Handling pytest ; extra == 'testing' from hook generated metadata: Requires-Dist (rebasehelper)
Requirement not satisfied: pytest ; extra == 'testing'
+ cat /builddir/build/BUILD/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64-pyproject-buildrequires
+ rm -rfv rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/
removed 'rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/entry_points.txt'
removed 'rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/top_level.txt'
removed 'rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/METADATA'
removed 'rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/LICENSE'
removed directory 'rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/'
+ RPM_EC=0
++ jobs -p
+ exit 0
Wrote: /builddir/build/SRPMS/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.buildreqs.nosrc.rpm
INFO: Going to install missing dynamic buildrequires
Updating and loading repositories:
 updates                                100% | 632.0 KiB/s |  29.7 KiB |  00m00s
 fedora                                 100% |   1.0 MiB/s |  32.2 KiB |  00m00s
 Copr repository                        100% |  44.4 KiB/s |   1.5 KiB |  00m00s
Repositories loaded.
Package "make-1:4.4.1-6.fc40.x86_64" is already installed.
Package "pandoc-3.1.3-29.fc40.x86_64" is already installed.
Package "pyproject-rpm-macros-1.16.4-1.fc40.noarch" is already installed.
Package "python3-devel-3.12.8-2.fc40.x86_64" is already installed.
Package "python3-sphinx-1:7.2.6-6.fc40.noarch" is already installed.
Package "python3-sphinx_rtd_theme-2.0.0-3.fc40.noarch" is already installed.
Package "python3-packaging-23.2-4.fc40.noarch" is already installed.
Package "python3-pip-23.3.2-2.fc40.noarch" is already installed.
Package "python3-requests-2.31.0-3.fc40.noarch" is already installed.
Package "python3-setuptools-69.0.3-4.fc40.noarch" is already installed.
Package "python3-setuptools_scm-8.0.4-3.fc40.noarch" is already installed.
Package "python3-setuptools_scm+toml-8.0.4-3.fc40.noarch" is already installed.
Package "python3-wheel-1:0.41.2-3.fc40.noarch" is already installed.

Package                             Arch   Version                 Repository      Size
Installing:                                                                            
 python3-GitPython                  noarch 3.1.40-4.fc40           fedora       1.7 MiB
 python3-ansicolors                 noarch 1.1.8-25.fc40           fedora      45.2 KiB
 python3-copr                       noarch 2.0-1.fc40              updates    243.5 KiB
 python3-pam                        noarch 2.0.2-8.fc40            fedora      58.4 KiB
 python3-pyquery                    noarch 1.4.3-16.fc40           updates    247.1 KiB
 python3-pytest                     noarch 7.4.3-3.fc40            fedora      15.0 MiB
 python3-rpkg                       noarch 1.67-5.fc40             updates      1.0 MiB
 python3-specfile                   noarch 0.33.0-1.fc40           updates    560.1 KiB
 python3-unidiff                    noarch 0.7.5-3.fc40            fedora      77.0 KiB
Installing dependencies:                                                               
 createrepo_c                       x86_64 1.2.0-2.fc40            updates    195.2 KiB
 createrepo_c-libs                  x86_64 1.2.0-2.fc40            updates    273.8 KiB
 dash                               x86_64 0.5.12-3.fc40           fedora     167.3 KiB
 dbus                               x86_64 1:1.14.10-3.fc40        fedora       0.0   B
 dbus-broker                        x86_64 36-2.fc40               updates    378.8 KiB
 dbus-common                        noarch 1:1.14.10-3.fc40        fedora      11.2 KiB
 desktop-file-utils                 x86_64 0.26-12.fc40            fedora     226.0 KiB
 devscripts-checkbashisms           noarch 2.23.7-3.fc40           fedora      52.5 KiB
 distribution-gpg-keys              noarch 1.106-1.fc40            updates    886.0 KiB
 dnf-data                           noarch 4.22.0-1.fc40           updates     38.7 KiB
 drpm                               x86_64 0.5.2-5.fc40            fedora     131.6 KiB
 emacs-filesystem                   noarch 1:29.4-9.fc40           updates      0.0   B
 enchant2                           x86_64 2.6.9-1.fc40            updates    165.9 KiB
 fakeroot                           x86_64 1.36.2-1.fc40           updates    162.9 KiB
 fakeroot-libs                      x86_64 1.36.2-1.fc40           updates    124.8 KiB
 gdk-pixbuf2                        x86_64 2.42.10-8.fc40          fedora       2.5 MiB
 git-core                           x86_64 2.48.1-1.fc40           updates     22.7 MiB
 glib2                              x86_64 2.80.3-1.fc40           updates     14.6 MiB
 gnupg2                             x86_64 2.4.4-1.fc40            fedora       9.5 MiB
 gnutls                             x86_64 3.8.6-1.fc40            updates      3.2 MiB
 gobject-introspection              x86_64 1.80.1-1.fc40           updates    322.1 KiB
 groff-base                         x86_64 1.23.0-6.fc40           fedora       3.8 MiB
 hunspell                           x86_64 1.7.2-7.fc40            fedora       1.3 MiB
 hunspell-en-US                     noarch 0.20201207-9.fc40       fedora     557.4 KiB
 hunspell-filesystem                x86_64 1.7.2-7.fc40            fedora       0.0   B
 ima-evm-utils                      x86_64 1.5-4.fc40              fedora     144.9 KiB
 json-glib                          x86_64 1.8.0-3.fc40            fedora     561.4 KiB
 kmod-libs                          x86_64 31-5.fc40               fedora     143.2 KiB
 less                               x86_64 643-6.fc40              updates    372.6 KiB
 libappstream-glib                  x86_64 0.8.3-1.fc40            updates      1.4 MiB
 libassuan                          x86_64 2.5.7-1.fc40            fedora     163.8 KiB
 libcbor                            x86_64 0.11.0-1.fc40           fedora      73.9 KiB
 libcomps                           x86_64 0.1.20-5.fc40           fedora     205.4 KiB
 libdnf                             x86_64 0.73.4-1.fc40           updates      2.1 MiB
 libedit                            x86_64 3.1-54.20250104cvs.fc40 updates    244.2 KiB
 libfido2                           x86_64 1.14.0-4.fc40           fedora     237.8 KiB
 libfsverity                        x86_64 1.4-12.fc40             fedora      32.6 KiB
 libgcrypt                          x86_64 1.10.3-3.fc40           fedora       1.3 MiB
 libgit2                            x86_64 1.7.2-4.fc40            updates      1.2 MiB
 libgpg-error                       x86_64 1.49-1.fc40             updates    875.2 KiB
 libjpeg-turbo                      x86_64 3.0.2-1.fc40            fedora     776.9 KiB
 libksba                            x86_64 1.6.6-1.fc40            fedora     392.9 KiB
 libmodulemd                        x86_64 2.15.0-12.fc40          updates    717.2 KiB
 libpng                             x86_64 2:1.6.40-3.fc40         fedora     241.8 KiB
 librepo                            x86_64 1.19.0-1.fc40           updates    244.5 KiB
 libseccomp                         x86_64 2.5.5-1.fc40            updates    169.3 KiB
 libsolv                            x86_64 0.7.31-1.fc40           updates    940.3 KiB
 libssh2                            x86_64 1.11.0-4.fc40           fedora     289.6 KiB
 libuser                            x86_64 0.64-8.fc40             fedora       1.9 MiB
 libxslt                            x86_64 1.1.42-1.fc40           updates    483.1 KiB
 llhttp                             x86_64 9.2.1-1.fc40            updates     72.6 KiB
 mock                               noarch 6.0-1.fc40              updates      1.0 MiB
 mock-core-configs                  noarch 41.5-1.fc40             updates    340.9 KiB
 mock-filesystem                    noarch 6.0-1.fc40              updates     17.7 KiB
 ncurses                            x86_64 6.4-12.20240127.fc40    fedora     621.0 KiB
 nettle                             x86_64 3.9.1-6.fc40            fedora     790.1 KiB
 npth                               x86_64 1.7-1.fc40              fedora      49.6 KiB
 openssh                            x86_64 9.6p1-1.fc40.4          updates      1.8 MiB
 openssh-clients                    x86_64 9.6p1-1.fc40.4          updates      2.6 MiB
 perl-AutoLoader                    noarch 5.74-507.fc40           updates     20.5 KiB
 perl-B                             x86_64 1.88-507.fc40           updates    492.4 KiB
 perl-Carp                          noarch 1.54-502.fc40           fedora      46.5 KiB
 perl-Class-Struct                  noarch 0.68-507.fc40           updates     25.4 KiB
 perl-Data-Dumper                   x86_64 2.188-503.fc40          fedora     111.7 KiB
 perl-Digest                        noarch 1.20-502.fc40           fedora      35.2 KiB
 perl-Digest-MD5                    x86_64 2.59-3.fc40             fedora      59.7 KiB
 perl-DynaLoader                    x86_64 1.54-507.fc40           updates     32.1 KiB
 perl-Encode                        x86_64 4:3.21-505.fc40         fedora       4.7 MiB
 perl-Errno                         x86_64 1.37-507.fc40           updates      8.3 KiB
 perl-Exporter                      noarch 5.78-3.fc40             fedora      54.2 KiB
 perl-Fcntl                         x86_64 1.15-507.fc40           updates     24.6 KiB
 perl-File-Basename                 noarch 2.86-507.fc40           updates     14.0 KiB
 perl-File-Path                     noarch 2.18-503.fc40           fedora      63.5 KiB
 perl-File-Temp                     noarch 1:0.231.100-503.fc40    fedora     162.3 KiB
 perl-File-stat                     noarch 1.13-507.fc40           updates     12.7 KiB
 perl-FileHandle                    noarch 2.05-507.fc40           updates      9.3 KiB
 perl-Getopt-Long                   noarch 1:2.57-4.fc40           updates    144.1 KiB
 perl-Getopt-Std                    noarch 1.13-507.fc40           updates     11.1 KiB
 perl-HTTP-Tiny                     noarch 0.088-5.fc40            fedora     152.1 KiB
 perl-IO                            x86_64 1.52-507.fc40           updates    151.0 KiB
 perl-IO-Socket-IP                  noarch 0.42-2.fc40             fedora      98.6 KiB
 perl-IO-Socket-SSL                 noarch 2.085-1.fc40            fedora     685.0 KiB
 perl-IPC-Open3                     noarch 1.22-507.fc40           updates     22.4 KiB
 perl-MIME-Base64                   x86_64 3.16-503.fc40           fedora      46.1 KiB
 perl-Mozilla-CA                    noarch 20231213-3.fc40         fedora       9.1 KiB
 perl-Net-SSLeay                    x86_64 1.94-3.fc40             fedora       1.3 MiB
 perl-POSIX                         x86_64 2.13-507.fc40           updates    233.0 KiB
 perl-PathTools                     x86_64 3.89-502.fc40           fedora     179.6 KiB
 perl-Pod-Escapes                   noarch 1:1.07-503.fc40         fedora      24.9 KiB
 perl-Pod-Perldoc                   noarch 3.28.01-503.fc40        fedora     163.1 KiB
 perl-Pod-Simple                    noarch 1:3.45-6.fc40           fedora     559.8 KiB
 perl-Pod-Usage                     noarch 4:2.03-504.fc40         updates     84.7 KiB
 perl-Scalar-List-Utils             x86_64 5:1.63-503.fc40         fedora     145.5 KiB
 perl-SelectSaver                   noarch 1.02-507.fc40           updates      2.2 KiB
 perl-Socket                        x86_64 4:2.038-1.fc40          updates    124.0 KiB
 perl-Storable                      x86_64 1:3.32-502.fc40         fedora     232.3 KiB
 perl-Symbol                        noarch 1.09-507.fc40           updates      6.8 KiB
 perl-Term-ANSIColor                noarch 5.01-504.fc40           fedora      97.5 KiB
 perl-Term-Cap                      noarch 1.18-503.fc40           fedora      29.3 KiB
 perl-Text-ParseWords               noarch 3.31-502.fc40           fedora      13.5 KiB
 perl-Text-Tabs+Wrap                noarch 2024.001-1.fc40         fedora      22.5 KiB
 perl-Time-Local                    noarch 2:1.350-5.fc40          fedora      68.9 KiB
 perl-URI                           noarch 5.28-1.fc40             updates    240.2 KiB
 perl-base                          noarch 2.27-507.fc40           updates     12.5 KiB
 perl-constant                      noarch 1.33-503.fc40           fedora      26.2 KiB
 perl-if                            noarch 0.61.000-507.fc40       updates      5.8 KiB
 perl-interpreter                   x86_64 4:5.38.3-507.fc40       updates    119.8 KiB
 perl-libnet                        noarch 3.15-503.fc40           fedora     289.0 KiB
 perl-libs                          x86_64 4:5.38.3-507.fc40       updates      9.8 MiB
 perl-locale                        noarch 1.10-507.fc40           updates      6.2 KiB
 perl-mro                           x86_64 1.28-507.fc40           updates     41.6 KiB
 perl-overload                      noarch 1.37-507.fc40           updates     71.5 KiB
 perl-overloading                   noarch 0.02-507.fc40           updates      4.8 KiB
 perl-parent                        noarch 1:0.241-502.fc40        fedora       9.7 KiB
 perl-podlators                     noarch 1:5.01-502.fc40         fedora     308.1 KiB
 perl-vars                          noarch 1.05-507.fc40           updates      3.9 KiB
 pigz                               x86_64 2.8-4.fc40              fedora     158.9 KiB
 procps-ng                          x86_64 4.0.4-3.fc40            fedora       1.0 MiB
 python3-argcomplete                noarch 3.5.3-1.fc40            updates    311.4 KiB
 python3-backoff                    noarch 2.2.1-6.fc40            fedora     104.1 KiB
 python3-cccolutils                 x86_64 1.5-27.fc40             fedora      33.8 KiB
 python3-cffi                       x86_64 1.16.0-4.fc40           fedora       1.3 MiB
 python3-click                      noarch 8.1.7-4.fc40            fedora       1.1 MiB
 python3-click-plugins              noarch 1.1.1-19.fc40           fedora      24.2 KiB
 python3-construct                  noarch 2.10.70-3.fc40          fedora       1.0 MiB
 python3-cssselect                  noarch 1.1.0-8.fc40            fedora     194.9 KiB
 python3-dateutil                   noarch 1:2.8.2-13.fc40         fedora     877.8 KiB
 python3-decorator                  noarch 5.1.1-9.fc40            fedora      77.3 KiB
 python3-defusedxml                 noarch 0.7.1-12.fc40           fedora     197.2 KiB
 python3-distro                     noarch 1.9.0-3.fc40            fedora     201.9 KiB
 python3-dnf                        noarch 4.22.0-1.fc40           updates      2.6 MiB
 python3-enchant                    noarch 3.2.2-12.fc40           fedora     373.2 KiB
 python3-file-magic                 noarch 5.45-4.fc40             fedora      29.0 KiB
 python3-filelock                   noarch 3.13.1-1.fc40           fedora      57.2 KiB
 python3-gitdb                      noarch 4.0.10-5.fc40           fedora     503.2 KiB
 python3-gobject-base               x86_64 3.48.2-1.fc40           updates      1.4 MiB
 python3-gssapi                     x86_64 1.7.3-8.fc40            fedora       2.7 MiB
 python3-hawkey                     x86_64 0.73.4-1.fc40           updates    305.9 KiB
 python3-iniconfig                  noarch 1.1.1-16.fc40           fedora      20.5 KiB
 python3-koji                       noarch 1.35.1-2.fc40           updates      2.1 MiB
 python3-libcomps                   x86_64 0.1.20-5.fc40           fedora     143.6 KiB
 python3-libdnf                     x86_64 0.73.4-1.fc40           updates      3.8 MiB
 python3-libmodulemd                x86_64 2.15.0-12.fc40          updates     15.2 KiB
 python3-lxml                       x86_64 5.1.0-7.fc40            fedora       5.2 MiB
 python3-munch                      noarch 2.5.0-15.fc40           fedora      61.5 KiB
 python3-pluggy                     noarch 1.3.0-3.fc40            fedora     182.5 KiB
 python3-ply                        noarch 3.11-23.fc40            fedora     561.6 KiB
 python3-progressbar2               noarch 3.53.2-11.fc40          fedora     256.9 KiB
 python3-pybeam                     noarch 0.8-2.fc40              updates     44.3 KiB
 python3-pycparser                  noarch 2.20-14.fc40            fedora     839.5 KiB
 python3-pycurl                     x86_64 7.45.2-10.fc40          fedora     429.7 KiB
 python3-pygit2                     x86_64 1.14.0-1.fc40           fedora       1.2 MiB
 python3-pyroute2                   noarch 0.7.3-5.fc40            fedora       3.3 MiB
 python3-pyxdg                      noarch 0.27-11.fc40            fedora     434.3 KiB
 python3-pyyaml                     x86_64 6.0.1-14.fc40           fedora     786.4 KiB
 python3-requests-gssapi            noarch 1.2.3-11.fc40           fedora      61.3 KiB
 python3-requests-toolbelt          noarch 1.0.0-5.fc40            fedora     300.2 KiB
 python3-rpm                        x86_64 4.19.1.1-1.fc40         fedora     171.5 KiB
 python3-rpmautospec                noarch 0.7.3-1.fc40            updates    149.5 KiB
 python3-rpmautospec-core           noarch 0.1.5-1.fc40            updates     10.5 KiB
 python3-six                        noarch 1.16.0-14.fc40          fedora     117.7 KiB
 python3-smmap                      noarch 5.0.0-8.fc40            fedora     198.2 KiB
 python3-templated-dictionary       noarch 1.5-1.fc40              updates     28.1 KiB
 python3-tomli-w                    noarch 1.0.0-11.fc40           fedora      28.0 KiB
 python3-utils                      noarch 3.7.0-3.fc40            fedora     173.1 KiB
 python3-zstandard                  x86_64 0.22.0-3.fc40           fedora       2.0 MiB
 rpkg-common                        noarch 1.67-5.fc40             updates     11.8 KiB
 rpm-sign-libs                      x86_64 4.19.1.1-1.fc40         fedora      39.4 KiB
 rpmdevtools                        noarch 9.6-7.fc40              fedora     213.9 KiB
 rpmlint                            noarch 2.5.0-5.fc40            fedora       1.1 MiB
 rpmlint-fedora-license-data        noarch 1.64-1.fc40             updates     22.8 KiB
 rpmlint-fedora-license-data-legacy noarch 1.64-1.fc40             updates     15.2 KiB
 shared-mime-info                   x86_64 2.3-5.fc40              updates      5.2 MiB
 systemd                            x86_64 255.16-1.fc40           updates     15.6 MiB
 systemd-container                  x86_64 255.16-1.fc40           updates      1.4 MiB
 systemd-pam                        x86_64 255.16-1.fc40           updates      1.0 MiB
 systemd-rpm-macros                 noarch 255.16-1.fc40           updates     10.9 KiB
 tpm2-tss                           x86_64 4.1.3-1.fc40            updates      1.5 MiB
 usermode                           x86_64 1.114-9.fc40            fedora     839.6 KiB
 zchunk-libs                        x86_64 1.5.1-1.fc40            updates    101.1 KiB

Transaction Summary:
 Installing:      189 packages

Total size of inbound packages is 50 MiB. Need to download 50 MiB.
After this operation 188 MiB will be used (install 188 MiB, remove 0 B).
[  1/189] python3-ansicolors-0:1.1.8-25 100% | 160.9 KiB/s |  29.1 KiB |  00m00s
[  2/189] python3-pam-0:2.0.2-8.fc40.no 100% | 476.0 KiB/s |  32.4 KiB |  00m00s
[  3/189] python3-GitPython-0:3.1.40-4. 100% |   1.3 MiB/s | 381.5 KiB |  00m00s
[  4/189] python3-unidiff-0:0.7.5-3.fc4 100% | 576.8 KiB/s |  38.1 KiB |  00m00s
[  5/189] python3-pytest-0:7.4.3-3.fc40 100% |   5.1 MiB/s |   1.9 MiB |  00m00s
[  6/189] python3-copr-0:2.0-1.fc40.noa 100% | 738.7 KiB/s |  99.0 KiB |  00m00s
[  7/189] python3-pyquery-0:1.4.3-16.fc 100% | 572.5 KiB/s |  63.0 KiB |  00m00s
[  8/189] python3-specfile-0:0.33.0-1.f 100% |   3.0 MiB/s | 166.8 KiB |  00m00s
[  9/189] python3-iniconfig-0:1.1.1-16. 100% | 416.9 KiB/s |  17.9 KiB |  00m00s
[ 10/189] python3-gitdb-0:4.0.10-5.fc40 100% |   1.2 MiB/s | 142.5 KiB |  00m00s
[ 11/189] python3-pluggy-0:1.3.0-3.fc40 100% |   1.2 MiB/s |  55.0 KiB |  00m00s
[ 12/189] python3-rpkg-0:1.67-5.fc40.no 100% |   1.2 MiB/s | 237.7 KiB |  00m00s
[ 13/189] python3-filelock-0:3.13.1-1.f 100% | 738.9 KiB/s |  36.2 KiB |  00m00s
[ 14/189] python3-munch-0:2.5.0-15.fc40 100% | 700.2 KiB/s |  25.9 KiB |  00m00s
[ 15/189] python3-requests-gssapi-0:1.2 100% | 765.6 KiB/s |  32.2 KiB |  00m00s
[ 16/189] python3-six-0:1.16.0-14.fc40. 100% |   1.1 MiB/s |  40.9 KiB |  00m00s
[ 17/189] python3-cssselect-0:1.1.0-8.f 100% |   1.1 MiB/s |  47.2 KiB |  00m00s
[ 18/189] python3-requests-toolbelt-0:1 100% |   2.1 MiB/s | 115.0 KiB |  00m00s
[ 19/189] rpkg-common-0:1.67-5.fc40.noa 100% | 643.6 KiB/s |  19.3 KiB |  00m00s
[ 20/189] python3-cccolutils-0:1.5-27.f 100% | 396.5 KiB/s |  20.6 KiB |  00m00s
[ 21/189] python3-pycurl-0:7.45.2-10.fc 100% |   2.9 MiB/s | 150.1 KiB |  00m00s
[ 22/189] python3-lxml-0:5.1.0-7.fc40.x 100% |  12.0 MiB/s |   1.5 MiB |  00m00s
[ 23/189] python3-rpm-0:4.19.1.1-1.fc40 100% |   1.6 MiB/s |  66.8 KiB |  00m00s
[ 24/189] python3-pyyaml-0:6.0.1-14.fc4 100% |   3.0 MiB/s | 232.8 KiB |  00m00s
[ 25/189] rpmdevtools-0:9.6-7.fc40.noar 100% |   1.6 MiB/s |  96.3 KiB |  00m00s
[ 26/189] rpmlint-0:2.5.0-5.fc40.noarch 100% |   6.7 MiB/s | 342.3 KiB |  00m00s
[ 27/189] python3-smmap-0:5.0.0-8.fc40. 100% |   1.1 MiB/s |  62.1 KiB |  00m00s
[ 28/189] python3-gssapi-0:1.7.3-8.fc40 100% |   9.0 MiB/s | 656.0 KiB |  00m00s
[ 29/189] rpm-sign-libs-0:4.19.1.1-1.fc 100% | 381.2 KiB/s |  26.7 KiB |  00m00s
[ 30/189] python3-progressbar2-0:3.53.2 100% |   1.0 MiB/s |  72.5 KiB |  00m00s
[ 31/189] dash-0:0.5.12-3.fc40.x86_64   100% |   2.7 MiB/s |  97.8 KiB |  00m00s
[ 32/189] desktop-file-utils-0:0.26-12. 100% |   1.2 MiB/s |  68.2 KiB |  00m00s
[ 33/189] devscripts-checkbashisms-0:2. 100% | 492.7 KiB/s |  28.1 KiB |  00m00s
[ 34/189] python3-enchant-0:3.2.2-12.fc 100% |   1.6 MiB/s | 100.9 KiB |  00m00s
[ 35/189] python3-file-magic-0:5.45-4.f 100% | 487.2 KiB/s |  19.5 KiB |  00m00s
[ 36/189] python3-pyxdg-0:0.27-11.fc40. 100% |   2.8 MiB/s | 130.2 KiB |  00m00s
[ 37/189] python3-tomli-w-0:1.0.0-11.fc 100% | 536.0 KiB/s |  20.9 KiB |  00m00s
[ 38/189] python3-zstandard-0:0.22.0-3. 100% |   9.4 MiB/s | 482.8 KiB |  00m00s
[ 39/189] python3-decorator-0:5.1.1-9.f 100% | 710.2 KiB/s |  30.5 KiB |  00m00s
[ 40/189] ima-evm-utils-0:1.5-4.fc40.x8 100% | 829.5 KiB/s |  62.2 KiB |  00m00s
[ 41/189] libfsverity-0:1.4-12.fc40.x86 100% | 239.8 KiB/s |  18.7 KiB |  00m00s
[ 42/189] gnupg2-0:2.4.4-1.fc40.x86_64  100% |  19.7 MiB/s |   2.7 MiB |  00m00s
[ 43/189] python3-utils-0:3.7.0-3.fc40. 100% | 890.6 KiB/s |  69.5 KiB |  00m00s
[ 44/189] perl-File-Temp-1:0.231.100-50 100% | 719.3 KiB/s |  59.0 KiB |  00m00s
[ 45/189] libassuan-0:2.5.7-1.fc40.x86_ 100% | 928.6 KiB/s |  66.9 KiB |  00m00s
[ 46/189] libgcrypt-0:1.10.3-3.fc40.x86 100% |   7.9 MiB/s | 504.1 KiB |  00m00s
[ 47/189] libksba-0:1.6.6-1.fc40.x86_64 100% |   2.1 MiB/s | 158.7 KiB |  00m00s
[ 48/189] npth-0:1.7-1.fc40.x86_64      100% | 397.0 KiB/s |  25.0 KiB |  00m00s
[ 49/189] perl-Carp-0:1.54-502.fc40.noa 100% | 699.8 KiB/s |  28.7 KiB |  00m00s
[ 50/189] perl-File-Path-0:2.18-503.fc4 100% |   1.0 MiB/s |  35.0 KiB |  00m00s
[ 51/189] perl-PathTools-0:3.89-502.fc4 100% |   2.4 MiB/s |  87.4 KiB |  00m00s
[ 52/189] perl-Exporter-0:5.78-3.fc40.n 100% | 715.7 KiB/s |  30.8 KiB |  00m00s
[ 53/189] perl-constant-0:1.33-503.fc40 100% | 651.8 KiB/s |  22.8 KiB |  00m00s
[ 54/189] perl-parent-1:0.241-502.fc40. 100% | 420.2 KiB/s |  14.7 KiB |  00m00s
[ 55/189] perl-Scalar-List-Utils-5:1.63 100% |   1.9 MiB/s |  72.9 KiB |  00m00s
[ 56/189] gdk-pixbuf2-0:2.42.10-8.fc40. 100% |  12.1 MiB/s | 484.7 KiB |  00m00s
[ 57/189] libappstream-glib-0:0.8.3-1.f 100% |   6.6 MiB/s | 405.0 KiB |  00m00s
[ 58/189] json-glib-0:1.8.0-3.fc40.x86_ 100% |   2.6 MiB/s | 166.7 KiB |  00m00s
[ 59/189] libjpeg-turbo-0:3.0.2-1.fc40. 100% |   6.1 MiB/s | 226.7 KiB |  00m00s
[ 60/189] python3-pybeam-0:0.8-2.fc40.n 100% |   1.4 MiB/s |  30.7 KiB |  00m00s
[ 61/189] rpmlint-fedora-license-data-0 100% |   1.7 MiB/s |  38.1 KiB |  00m00s
[ 62/189] libpng-2:1.6.40-3.fc40.x86_64 100% |   2.1 MiB/s | 119.9 KiB |  00m00s
[ 63/189] rpmlint-fedora-license-data-l 100% |   1.7 MiB/s |  36.0 KiB |  00m00s
[ 64/189] python3-construct-0:2.10.70-3 100% |   2.5 MiB/s | 152.2 KiB |  00m00s
[ 65/189] emacs-filesystem-1:29.4-9.fc4 100% | 416.8 KiB/s |   9.2 KiB |  00m00s
[ 66/189] fakeroot-0:1.36.2-1.fc40.x86_ 100% |   4.1 MiB/s |  99.8 KiB |  00m00s
[ 67/189] python3-argcomplete-0:3.5.3-1 100% |   2.9 MiB/s |  96.6 KiB |  00m00s
[ 68/189] enchant2-0:2.6.9-1.fc40.x86_6 100% |   2.6 MiB/s |  64.6 KiB |  00m00s
[ 69/189] libxslt-0:1.1.42-1.fc40.x86_6 100% |   3.2 MiB/s | 189.0 KiB |  00m00s
[ 70/189] hunspell-en-US-0:0.20201207-9 100% |   4.2 MiB/s | 180.8 KiB |  00m00s
[ 71/189] hunspell-0:1.7.2-7.fc40.x86_6 100% |   6.6 MiB/s | 476.7 KiB |  00m00s
[ 72/189] hunspell-filesystem-0:1.7.2-7 100% | 203.9 KiB/s |   9.0 KiB |  00m00s
[ 73/189] perl-interpreter-4:5.38.3-507 100% |   2.5 MiB/s |  70.9 KiB |  00m00s
[ 74/189] perl-Errno-0:1.37-507.fc40.x8 100% | 581.7 KiB/s |  14.0 KiB |  00m00s
[ 75/189] perl-Fcntl-0:1.15-507.fc40.x8 100% | 640.0 KiB/s |  19.2 KiB |  00m00s
[ 76/189] perl-IO-0:1.52-507.fc40.x86_6 100% |   2.9 MiB/s |  80.8 KiB |  00m00s
[ 77/189] perl-libs-4:5.38.3-507.fc40.x 100% |  18.9 MiB/s |   2.3 MiB |  00m00s
[ 78/189] git-core-0:2.48.1-1.fc40.x86_ 100% |  30.5 MiB/s |   4.9 MiB |  00m00s
[ 79/189] perl-overload-0:1.37-507.fc40 100% |   2.1 MiB/s |  44.6 KiB |  00m00s
[ 80/189] perl-POSIX-0:2.13-507.fc40.x8 100% |   3.1 MiB/s |  95.6 KiB |  00m00s
[ 81/189] perl-File-Basename-0:2.86-507 100% | 810.4 KiB/s |  16.2 KiB |  00m00s
[ 82/189] perl-vars-0:1.05-507.fc40.noa 100% | 547.2 KiB/s |  12.0 KiB |  00m00s
[ 83/189] libgpg-error-0:1.49-1.fc40.x8 100% |   4.5 MiB/s | 232.4 KiB |  00m00s
[ 84/189] tpm2-tss-0:4.1.3-1.fc40.x86_6 100% |  11.5 MiB/s | 411.9 KiB |  00m00s
[ 85/189] glib2-0:2.80.3-1.fc40.x86_64  100% |  35.1 MiB/s |   3.0 MiB |  00m00s
[ 86/189] nettle-0:3.9.1-6.fc40.x86_64  100% |   6.6 MiB/s | 424.9 KiB |  00m00s
[ 87/189] gnutls-0:3.8.6-1.fc40.x86_64  100% |  15.6 MiB/s |   1.1 MiB |  00m00s
[ 88/189] shared-mime-info-0:2.3-5.fc40 100% |  14.1 MiB/s | 390.4 KiB |  00m00s
[ 89/189] perl-Getopt-Long-1:2.57-4.fc4 100% |   3.1 MiB/s |  63.4 KiB |  00m00s
[ 90/189] mock-0:6.0-1.fc40.noarch      100% |  12.6 MiB/s | 310.4 KiB |  00m00s
[ 91/189] perl-Text-ParseWords-0:3.31-5 100% | 465.4 KiB/s |  16.3 KiB |  00m00s
[ 92/189] mock-filesystem-0:6.0-1.fc40. 100% | 963.2 KiB/s |  20.2 KiB |  00m00s
[ 93/189] python3-templated-dictionary- 100% | 966.4 KiB/s |  20.3 KiB |  00m00s
[ 94/189] python3-backoff-0:2.2.1-6.fc4 100% | 778.7 KiB/s |  42.0 KiB |  00m00s
[ 95/189] pigz-0:2.8-4.fc40.x86_64      100% |   1.7 MiB/s |  95.2 KiB |  00m00s
[ 96/189] python3-distro-0:1.9.0-3.fc40 100% |   1.3 MiB/s |  49.8 KiB |  00m00s
[ 97/189] usermode-0:1.114-9.fc40.x86_6 100% |   3.0 MiB/s | 187.4 KiB |  00m00s
[ 98/189] python3-pyroute2-0:0.7.3-5.fc 100% |  11.1 MiB/s | 986.0 KiB |  00m00s
[ 99/189] libuser-0:0.64-8.fc40.x86_64  100% |   4.5 MiB/s | 402.4 KiB |  00m00s
[100/189] python3-koji-0:1.35.1-2.fc40. 100% |  15.4 MiB/s | 425.3 KiB |  00m00s
[101/189] python3-libmodulemd-0:2.15.0- 100% | 609.1 KiB/s |  14.0 KiB |  00m00s
[102/189] python3-dateutil-1:2.8.2-13.f 100% |   8.7 MiB/s | 355.9 KiB |  00m00s
[103/189] libmodulemd-0:2.15.0-12.fc40. 100% |   9.5 MiB/s | 232.3 KiB |  00m00s
[104/189] python3-defusedxml-0:0.7.1-12 100% |   1.2 MiB/s |  59.1 KiB |  00m00s
[105/189] python3-rpmautospec-0:0.7.3-1 100% |   3.3 MiB/s |  74.3 KiB |  00m00s
[106/189] python3-click-0:8.1.7-4.fc40. 100% |   5.1 MiB/s | 235.7 KiB |  00m00s
[107/189] python3-click-plugins-0:1.1.1 100% | 379.0 KiB/s |  17.1 KiB |  00m00s
[108/189] python3-pygit2-0:1.14.0-1.fc4 100% |   6.6 MiB/s | 285.5 KiB |  00m00s
[109/189] python3-cffi-0:1.16.0-4.fc40. 100% |   6.0 MiB/s | 306.3 KiB |  00m00s
[110/189] python3-pycparser-0:2.20-14.f 100% |   2.8 MiB/s | 156.8 KiB |  00m00s
[111/189] python3-ply-0:3.11-23.fc40.no 100% |   2.7 MiB/s | 136.3 KiB |  00m00s
[112/189] python3-gobject-base-0:3.48.2 100% |  12.6 MiB/s | 375.2 KiB |  00m00s
[113/189] gobject-introspection-0:1.80. 100% |   3.9 MiB/s | 111.1 KiB |  00m00s
[114/189] perl-mro-0:1.28-507.fc40.x86_ 100% | 997.7 KiB/s |  27.9 KiB |  00m00s
[115/189] perl-overloading-0:0.02-507.f 100% | 442.3 KiB/s |  11.9 KiB |  00m00s
[116/189] perl-DynaLoader-0:1.54-507.fc 100% | 964.0 KiB/s |  25.1 KiB |  00m00s
[117/189] perl-Encode-4:3.21-505.fc40.x 100% |  20.7 MiB/s |   1.1 MiB |  00m00s
[118/189] perl-MIME-Base64-0:3.16-503.f 100% | 899.0 KiB/s |  29.7 KiB |  00m00s
[119/189] perl-Storable-1:3.32-502.fc40 100% |   2.8 MiB/s |  98.2 KiB |  00m00s
[120/189] perl-locale-0:1.10-507.fc40.n 100% | 552.0 KiB/s |  12.7 KiB |  00m00s
[121/189] perl-File-stat-0:1.13-507.fc4 100% | 704.2 KiB/s |  16.2 KiB |  00m00s
[122/189] perl-SelectSaver-0:1.02-507.f 100% | 448.2 KiB/s |  10.8 KiB |  00m00s
[123/189] perl-Socket-4:2.038-1.fc40.x8 100% |   2.4 MiB/s |  54.8 KiB |  00m00s
[124/189] perl-Symbol-0:1.09-507.fc40.n 100% | 601.7 KiB/s |  13.2 KiB |  00m00s
[125/189] perl-base-0:2.27-507.fc40.noa 100% | 725.9 KiB/s |  15.2 KiB |  00m00s
[126/189] perl-Class-Struct-0:0.68-507. 100% | 879.3 KiB/s |  21.1 KiB |  00m00s
[127/189] createrepo_c-0:1.2.0-2.fc40.x 100% |   2.8 MiB/s |  77.8 KiB |  00m00s
[128/189] mock-core-configs-0:41.5-1.fc 100% |   5.2 MiB/s | 155.5 KiB |  00m00s
[129/189] distribution-gpg-keys-0:1.106 100% |  18.9 MiB/s | 695.3 KiB |  00m00s
[130/189] systemd-rpm-macros-0:255.16-1 100% | 896.7 KiB/s |  27.8 KiB |  00m00s
[131/189] dbus-1:1.14.10-3.fc40.x86_64  100% | 242.3 KiB/s |   8.0 KiB |  00m00s
[132/189] systemd-pam-0:255.16-1.fc40.x 100% |   5.0 MiB/s | 381.9 KiB |  00m00s
[133/189] kmod-libs-0:31-5.fc40.x86_64  100% |   1.2 MiB/s |  68.2 KiB |  00m00s
[134/189] systemd-0:255.16-1.fc40.x86_6 100% |  37.7 MiB/s |   5.3 MiB |  00m00s
[135/189] less-0:643-6.fc40.x86_64      100% |   8.1 MiB/s | 174.7 KiB |  00m00s
[136/189] procps-ng-0:4.0.4-3.fc40.x86_ 100% |   8.5 MiB/s | 367.2 KiB |  00m00s
[137/189] openssh-clients-0:9.6p1-1.fc4 100% |  23.5 MiB/s | 747.6 KiB |  00m00s
[138/189] openssh-0:9.6p1-1.fc40.4.x86_ 100% |  14.8 MiB/s | 425.0 KiB |  00m00s
[139/189] systemd-container-0:255.16-1. 100% |   6.1 MiB/s | 583.3 KiB |  00m00s
[140/189] fakeroot-libs-0:1.36.2-1.fc40 100% |   1.8 MiB/s |  39.2 KiB |  00m00s
[141/189] libfido2-0:1.14.0-4.fc40.x86_ 100% |   2.5 MiB/s |  97.6 KiB |  00m00s
[142/189] libcbor-0:0.11.0-1.fc40.x86_6 100% | 923.7 KiB/s |  33.3 KiB |  00m00s
[143/189] createrepo_c-libs-0:1.2.0-2.f 100% |   4.7 MiB/s | 110.6 KiB |  00m00s
[144/189] libgit2-0:1.7.2-4.fc40.x86_64 100% |  19.6 MiB/s | 543.0 KiB |  00m00s
[145/189] libssh2-0:1.11.0-4.fc40.x86_6 100% |   3.6 MiB/s | 129.9 KiB |  00m00s
[146/189] drpm-0:0.5.2-5.fc40.x86_64    100% |   1.3 MiB/s |  64.1 KiB |  00m00s
[147/189] perl-Getopt-Std-0:1.13-507.fc 100% | 667.6 KiB/s |  14.7 KiB |  00m00s
[148/189] dbus-broker-0:36-2.fc40.x86_6 100% |   8.0 MiB/s | 171.1 KiB |  00m00s
[149/189] libseccomp-0:2.5.5-1.fc40.x86 100% |   3.4 MiB/s |  70.2 KiB |  00m00s
[150/189] dbus-common-1:1.14.10-3.fc40. 100% | 434.7 KiB/s |  14.8 KiB |  00m00s
[151/189] python3-rpmautospec-core-0:0. 100% | 701.3 KiB/s |  14.7 KiB |  00m00s
[152/189] libedit-0:3.1-54.20250104cvs. 100% |   4.9 MiB/s | 105.4 KiB |  00m00s
[153/189] dnf-data-0:4.22.0-1.fc40.noar 100% |   1.9 MiB/s |  39.5 KiB |  00m00s
[154/189] python3-dnf-0:4.22.0-1.fc40.n 100% |  19.5 MiB/s | 619.9 KiB |  00m00s
[155/189] python3-hawkey-0:0.73.4-1.fc4 100% |   4.9 MiB/s | 104.3 KiB |  00m00s
[156/189] python3-libdnf-0:0.73.4-1.fc4 100% |  25.9 MiB/s | 847.2 KiB |  00m00s
[157/189] libdnf-0:0.73.4-1.fc40.x86_64 100% |  20.1 MiB/s | 699.4 KiB |  00m00s
[158/189] python3-libcomps-0:0.1.20-5.f 100% | 993.4 KiB/s |  47.7 KiB |  00m00s
[159/189] librepo-0:1.19.0-1.fc40.x86_6 100% |   4.2 MiB/s |  99.6 KiB |  00m00s
[160/189] zchunk-libs-0:1.5.1-1.fc40.x8 100% |   2.4 MiB/s |  52.1 KiB |  00m00s
[161/189] libcomps-0:0.1.20-5.fc40.x86_ 100% |   1.6 MiB/s |  77.1 KiB |  00m00s
[162/189] llhttp-0:9.2.1-1.fc40.x86_64  100% |   1.6 MiB/s |  32.9 KiB |  00m00s
[163/189] libsolv-0:0.7.31-1.fc40.x86_6 100% |  16.2 MiB/s | 430.7 KiB |  00m00s
[164/189] perl-Pod-Usage-4:2.03-504.fc4 100% |   1.8 MiB/s |  39.8 KiB |  00m00s
[165/189] perl-Pod-Perldoc-0:3.28.01-50 100% |   2.3 MiB/s |  85.6 KiB |  00m00s
[166/189] perl-podlators-1:5.01-502.fc4 100% |   3.6 MiB/s | 125.5 KiB |  00m00s
[167/189] groff-base-0:1.23.0-6.fc40.x8 100% |  22.9 MiB/s |   1.1 MiB |  00m00s
[168/189] perl-HTTP-Tiny-0:0.088-5.fc40 100% |   1.6 MiB/s |  55.6 KiB |  00m00s
[169/189] perl-Pod-Simple-1:3.45-6.fc40 100% |   5.9 MiB/s | 218.5 KiB |  00m00s
[170/189] perl-Term-ANSIColor-0:5.01-50 100% |   1.4 MiB/s |  47.6 KiB |  00m00s
[171/189] perl-Term-Cap-0:1.18-503.fc40 100% | 626.5 KiB/s |  21.9 KiB |  00m00s
[172/189] perl-IO-Socket-SSL-0:2.085-1. 100% |   5.9 MiB/s | 228.6 KiB |  00m00s
[173/189] perl-Mozilla-CA-0:20231213-3. 100% | 433.0 KiB/s |  13.9 KiB |  00m00s
[174/189] perl-Net-SSLeay-0:1.94-3.fc40 100% |   9.2 MiB/s | 384.9 KiB |  00m00s
[175/189] perl-Time-Local-2:1.350-5.fc4 100% |   1.0 MiB/s |  34.3 KiB |  00m00s
[176/189] perl-Pod-Escapes-1:1.07-503.f 100% | 577.2 KiB/s |  19.6 KiB |  00m00s
[177/189] perl-Text-Tabs+Wrap-0:2024.00 100% | 599.4 KiB/s |  21.6 KiB |  00m00s
[178/189] ncurses-0:6.4-12.20240127.fc4 100% |  11.1 MiB/s | 421.2 KiB |  00m00s
[179/189] perl-IO-Socket-IP-0:0.42-2.fc 100% |   1.2 MiB/s |  41.7 KiB |  00m00s
[180/189] perl-if-0:0.61.000-507.fc40.n 100% | 592.5 KiB/s |  13.0 KiB |  00m00s
[181/189] perl-IPC-Open3-0:1.22-507.fc4 100% |   1.0 MiB/s |  20.9 KiB |  00m00s
[182/189] perl-AutoLoader-0:5.74-507.fc 100% | 921.3 KiB/s |  20.3 KiB |  00m00s
[183/189] perl-URI-0:5.28-1.fc40.noarch 100% |   5.6 MiB/s | 132.8 KiB |  00m00s
[184/189] perl-Data-Dumper-0:2.188-503. 100% |   1.6 MiB/s |  56.0 KiB |  00m00s
[185/189] perl-libnet-0:3.15-503.fc40.n 100% |   3.6 MiB/s | 128.5 KiB |  00m00s
[186/189] perl-Digest-MD5-0:2.59-3.fc40 100% |   1.0 MiB/s |  35.8 KiB |  00m00s
[187/189] perl-Digest-0:1.20-502.fc40.n 100% | 725.0 KiB/s |  24.6 KiB |  00m00s
[188/189] perl-FileHandle-0:2.05-507.fc 100% | 692.2 KiB/s |  14.5 KiB |  00m00s
[189/189] perl-B-0:1.88-507.fc40.x86_64 100% |   7.4 MiB/s | 175.0 KiB |  00m00s
--------------------------------------------------------------------------------
[189/189] Total                         100% |  15.8 MiB/s |  50.2 MiB |  00m03s
Running transaction
[  1/191] Verify package files          100% | 866.0   B/s | 189.0   B |  00m00s
[  2/191] Prepare transaction           100% |   1.0 KiB/s | 189.0   B |  00m00s
[  3/191] Installing python3-six-0:1.16 100% |  39.1 MiB/s | 120.1 KiB |  00m00s
[  4/191] Installing libgpg-error-0:1.4 100% |  86.0 MiB/s | 881.1 KiB |  00m00s
[  5/191] Installing zchunk-libs-0:1.5. 100% |  50.1 MiB/s | 102.5 KiB |  00m00s
[  6/191] Installing libsolv-0:0.7.31-1 100% | 131.4 MiB/s | 942.0 KiB |  00m00s
[  7/191] Installing libseccomp-0:2.5.5 100% |  55.7 MiB/s | 171.2 KiB |  00m00s
[  8/191] Installing python3-click-0:8. 100% | 118.6 MiB/s |   1.1 MiB |  00m00s
[  9/191] Installing mock-filesystem-0: 100% | 393.3 KiB/s |  18.9 KiB |  00m00s
>>> Running pre-install scriptlet: tpm2-tss-0:4.1.3-1.fc40.x86_64
>>> Stop pre-install scriptlet: tpm2-tss-0:4.1.3-1.fc40.x86_64
[ 10/191] Installing tpm2-tss-0:4.1.3-1 100% |  86.3 MiB/s |   1.6 MiB |  00m00s
[ 11/191] Installing hunspell-filesyste 100% |   0.0   B/s | 388.0   B |  00m00s
[ 12/191] Installing hunspell-en-US-0:0 100% | 136.3 MiB/s | 558.1 KiB |  00m00s
[ 13/191] Installing hunspell-0:1.7.2-7 100% |  58.7 MiB/s |   1.4 MiB |  00m00s
[ 14/191] Installing python3-argcomplet 100% |  45.4 MiB/s | 325.1 KiB |  00m00s
[ 15/191] Installing emacs-filesystem-1 100% |   0.0   B/s | 544.0   B |  00m00s
[ 16/191] Installing ima-evm-utils-0:1. 100% |  47.9 MiB/s | 147.1 KiB |  00m00s
[ 17/191] Installing python3-click-plug 100% |   1.9 MiB/s |  27.7 KiB |  00m00s
[ 18/191] Installing libassuan-0:2.5.7- 100% |  80.9 MiB/s | 165.6 KiB |  00m00s
[ 19/191] Installing libgcrypt-0:1.10.3 100% | 144.0 MiB/s |   1.3 MiB |  00m00s
[ 20/191] Installing libksba-0:1.6.6-1. 100% | 128.7 MiB/s | 395.4 KiB |  00m00s
[ 21/191] Installing python3-munch-0:2. 100% |  21.1 MiB/s |  64.8 KiB |  00m00s
[ 22/191] Installing python3-construct- 100% |  38.2 MiB/s |   1.0 MiB |  00m00s
[ 23/191] Installing python3-pybeam-0:0 100% |  16.5 MiB/s |  50.6 KiB |  00m00s
[ 24/191] Installing python3-dateutil-1 100% |  67.0 MiB/s | 891.5 KiB |  00m00s
[ 25/191] Installing ncurses-0:6.4-12.2 100% |  24.5 MiB/s | 627.6 KiB |  00m00s
>>> Running pre-install scriptlet: groff-base-0:1.23.0-6.fc40.x86_64
>>> Stop pre-install scriptlet: groff-base-0:1.23.0-6.fc40.x86_64
[ 26/191] Installing groff-base-0:1.23. 100% |  55.1 MiB/s |   3.9 MiB |  00m00s
>>> Running post-install scriptlet: groff-base-0:1.23.0-6.fc40.x86_64
>>> Stop post-install scriptlet: groff-base-0:1.23.0-6.fc40.x86_64
[ 27/191] Installing perl-Digest-0:1.20 100% |  36.1 MiB/s |  37.0 KiB |  00m00s
[ 28/191] Installing perl-Digest-MD5-0: 100% |  30.1 MiB/s |  61.6 KiB |  00m00s
[ 29/191] Installing perl-B-0:1.88-507. 100% |  25.5 MiB/s | 495.7 KiB |  00m00s
[ 30/191] Installing perl-FileHandle-0: 100% |   9.5 MiB/s |   9.8 KiB |  00m00s
[ 31/191] Installing perl-Data-Dumper-0 100% |  37.0 MiB/s | 113.6 KiB |  00m00s
[ 32/191] Installing perl-libnet-0:3.15 100% |  71.9 MiB/s | 294.3 KiB |  00m00s
[ 33/191] Installing perl-AutoLoader-0: 100% |  20.5 MiB/s |  20.9 KiB |  00m00s
[ 34/191] Installing perl-URI-0:5.28-1. 100% |  27.3 MiB/s | 251.8 KiB |  00m00s
[ 35/191] Installing perl-File-Path-0:2 100% |  63.0 MiB/s |  64.5 KiB |  00m00s
[ 36/191] Installing perl-locale-0:1.10 100% |   6.5 MiB/s |   6.6 KiB |  00m00s
[ 37/191] Installing perl-Mozilla-CA-0: 100% |   9.9 MiB/s |  10.2 KiB |  00m00s
[ 38/191] Installing perl-Time-Local-2: 100% |  68.9 MiB/s |  70.5 KiB |  00m00s
[ 39/191] Installing perl-Pod-Escapes-1 100% |  25.3 MiB/s |  25.9 KiB |  00m00s
[ 40/191] Installing perl-Text-Tabs+Wra 100% |  23.3 MiB/s |  23.8 KiB |  00m00s
[ 41/191] Installing perl-IO-Socket-IP- 100% |  49.0 MiB/s | 100.4 KiB |  00m00s
[ 42/191] Installing perl-if-0:0.61.000 100% |   6.1 MiB/s |   6.2 KiB |  00m00s
[ 43/191] Installing perl-Net-SSLeay-0: 100% |  80.2 MiB/s |   1.4 MiB |  00m00s
[ 44/191] Installing perl-IO-Socket-SSL 100% | 134.6 MiB/s | 689.0 KiB |  00m00s
[ 45/191] Installing perl-POSIX-0:2.13- 100% | 114.4 MiB/s | 234.3 KiB |  00m00s
[ 46/191] Installing perl-Class-Struct- 100% |  25.3 MiB/s |  25.9 KiB |  00m00s
[ 47/191] Installing perl-Term-ANSIColo 100% |  48.4 MiB/s |  99.1 KiB |  00m00s
[ 48/191] Installing perl-Term-Cap-0:1. 100% |  29.8 MiB/s |  30.5 KiB |  00m00s
[ 49/191] Installing perl-IPC-Open3-0:1 100% |   2.8 MiB/s |  23.3 KiB |  00m00s
[ 50/191] Installing perl-HTTP-Tiny-0:0 100% |  75.3 MiB/s | 154.2 KiB |  00m00s
[ 51/191] Installing perl-Pod-Simple-1: 100% |  92.7 MiB/s | 569.4 KiB |  00m00s
[ 52/191] Installing perl-File-Temp-1:0 100% |  80.1 MiB/s | 164.0 KiB |  00m00s
[ 53/191] Installing perl-Socket-4:2.03 100% |  30.8 MiB/s | 126.0 KiB |  00m00s
[ 54/191] Installing perl-SelectSaver-0 100% |   2.5 MiB/s |   2.6 KiB |  00m00s
[ 55/191] Installing perl-Symbol-0:1.09 100% |   7.0 MiB/s |   7.2 KiB |  00m00s
[ 56/191] Installing perl-File-stat-0:1 100% |  12.9 MiB/s |  13.2 KiB |  00m00s
[ 57/191] Installing perl-podlators-1:5 100% | 101.6 MiB/s | 312.1 KiB |  00m00s
[ 58/191] Installing perl-Pod-Perldoc-0 100% |  54.9 MiB/s | 168.6 KiB |  00m00s
[ 59/191] Installing perl-Fcntl-0:1.15- 100% |  25.1 MiB/s |  25.8 KiB |  00m00s
[ 60/191] Installing perl-Text-ParseWor 100% |  14.2 MiB/s |  14.5 KiB |  00m00s
[ 61/191] Installing perl-mro-0:1.28-50 100% |  13.9 MiB/s |  42.7 KiB |  00m00s
[ 62/191] Installing perl-overloading-0 100% |   5.4 MiB/s |   5.5 KiB |  00m00s
[ 63/191] Installing perl-base-0:2.27-5 100% |  12.6 MiB/s |  12.9 KiB |  00m00s
[ 64/191] Installing perl-IO-0:1.52-507 100% |  50.5 MiB/s | 155.3 KiB |  00m00s
[ 65/191] Installing perl-Pod-Usage-4:2 100% |  42.1 MiB/s |  86.3 KiB |  00m00s
[ 66/191] Installing perl-Scalar-List-U 100% |  16.1 MiB/s | 148.7 KiB |  00m00s
[ 67/191] Installing perl-constant-0:1. 100% |  26.7 MiB/s |  27.4 KiB |  00m00s
[ 68/191] Installing perl-parent-1:0.24 100% |  10.2 MiB/s |  10.4 KiB |  00m00s
[ 69/191] Installing perl-Errno-0:1.37- 100% |   2.1 MiB/s |   8.8 KiB |  00m00s
[ 70/191] Installing perl-File-Basename 100% |  14.2 MiB/s |  14.6 KiB |  00m00s
[ 71/191] Installing perl-vars-0:1.05-5 100% |   4.2 MiB/s |   4.3 KiB |  00m00s
[ 72/191] Installing perl-overload-0:1. 100% |  70.3 MiB/s |  71.9 KiB |  00m00s
[ 73/191] Installing perl-MIME-Base64-0 100% |  23.6 MiB/s |  48.3 KiB |  00m00s
[ 74/191] Installing perl-Storable-1:3. 100% | 114.2 MiB/s | 233.9 KiB |  00m00s
[ 75/191] Installing perl-Getopt-Std-0: 100% |  11.4 MiB/s |  11.6 KiB |  00m00s
[ 76/191] Installing perl-Getopt-Long-1 100% |  47.8 MiB/s | 146.9 KiB |  00m00s
[ 77/191] Installing perl-Carp-0:1.54-5 100% |  46.5 MiB/s |  47.7 KiB |  00m00s
[ 78/191] Installing perl-Exporter-0:5. 100% |   6.8 MiB/s |  55.5 KiB |  00m00s
[ 79/191] Installing perl-PathTools-0:3 100% |  45.0 MiB/s | 184.2 KiB |  00m00s
[ 80/191] Installing perl-DynaLoader-0: 100% |  31.7 MiB/s |  32.5 KiB |  00m00s
[ 81/191] Installing perl-Encode-4:3.21 100% | 124.1 MiB/s |   4.7 MiB |  00m00s
[ 82/191] Installing perl-libs-4:5.38.3 100% |  52.4 MiB/s |   9.9 MiB |  00m00s
[ 83/191] Installing perl-interpreter-4 100% | 118.6 MiB/s | 121.5 KiB |  00m00s
[ 84/191] Installing devscripts-checkba 100% |  26.3 MiB/s |  53.8 KiB |  00m00s
[ 85/191] Installing llhttp-0:9.2.1-1.f 100% |  72.0 MiB/s |  73.7 KiB |  00m00s
[ 86/191] Installing libcomps-0:0.1.20- 100% |  50.5 MiB/s | 206.7 KiB |  00m00s
[ 87/191] Installing python3-libcomps-0 100% |  47.6 MiB/s | 146.1 KiB |  00m00s
[ 88/191] Installing dnf-data-0:4.22.0- 100% |  20.1 MiB/s |  41.2 KiB |  00m00s
[ 89/191] Installing libedit-0:3.1-54.2 100% |  80.0 MiB/s | 245.9 KiB |  00m00s
[ 90/191] Installing python3-rpmautospe 100% |   6.5 MiB/s |  13.3 KiB |  00m00s
[ 91/191] Installing dbus-common-1:1.14 100% | 233.6 KiB/s |  13.6 KiB |  00m00s
>>> Running post-install scriptlet: dbus-common-1:1.14.10-3.fc40.noarch
>>> Stop post-install scriptlet: dbus-common-1:1.14.10-3.fc40.noarch
>>> Running pre-install scriptlet: dbus-broker-0:36-2.fc40.x86_64
>>> Stop pre-install scriptlet: dbus-broker-0:36-2.fc40.x86_64
[ 92/191] Installing dbus-broker-0:36-2 100% |  18.6 MiB/s | 381.3 KiB |  00m00s
>>> Running post-install scriptlet: dbus-broker-0:36-2.fc40.x86_64
>>> Stop post-install scriptlet: dbus-broker-0:36-2.fc40.x86_64
[ 93/191] Installing dbus-1:1.14.10-3.f 100% |   0.0   B/s | 124.0   B |  00m00s
[ 94/191] Installing libssh2-0:1.11.0-4 100% |  94.8 MiB/s | 291.3 KiB |  00m00s
[ 95/191] Installing libgit2-0:1.7.2-4. 100% | 123.7 MiB/s |   1.2 MiB |  00m00s
[ 96/191] Installing drpm-0:0.5.2-5.fc4 100% |  64.8 MiB/s | 132.8 KiB |  00m00s
[ 97/191] Installing fakeroot-libs-0:1. 100% |  61.6 MiB/s | 126.1 KiB |  00m00s
[ 98/191] Installing fakeroot-0:1.36.2- 100% |   4.7 MiB/s | 167.5 KiB |  00m00s
>>> Running post-install scriptlet: fakeroot-0:1.36.2-1.fc40.x86_64
>>> Stop post-install scriptlet: fakeroot-0:1.36.2-1.fc40.x86_64
[ 99/191] Installing libcbor-0:0.11.0-1 100% |  36.8 MiB/s |  75.3 KiB |  00m00s
[100/191] Installing libfido2-0:1.14.0- 100% |  77.9 MiB/s | 239.3 KiB |  00m00s
[101/191] Installing openssh-0:9.6p1-1. 100% |  79.3 MiB/s |   1.8 MiB |  00m00s
[102/191] Installing openssh-clients-0: 100% |  68.9 MiB/s |   2.6 MiB |  00m00s
>>> Running post-install scriptlet: openssh-clients-0:9.6p1-1.fc40.4.x86_64
>>> Stop post-install scriptlet: openssh-clients-0:9.6p1-1.fc40.4.x86_64
[103/191] Installing less-0:643-6.fc40. 100% |  73.4 MiB/s | 376.0 KiB |  00m00s
[104/191] Installing git-core-0:2.48.1- 100% |  97.4 MiB/s |  22.7 MiB |  00m00s
[105/191] Installing procps-ng-0:4.0.4- 100% |  93.6 MiB/s |   1.0 MiB |  00m00s
[106/191] Installing kmod-libs-0:31-5.f 100% |  12.8 MiB/s | 144.3 KiB |  00m00s
[107/191] Installing systemd-pam-0:255. 100% | 115.5 MiB/s |   1.0 MiB |  00m00s
[108/191] Installing systemd-0:255.16-1 100% |  38.4 MiB/s |  15.8 MiB |  00m00s
>>> Running post-install scriptlet: systemd-0:255.16-1.fc40.x86_64
>>> Stop post-install scriptlet: systemd-0:255.16-1.fc40.x86_64
[109/191] Installing systemd-container- 100% |   5.7 MiB/s |   1.4 MiB |  00m00s
[110/191] Installing distribution-gpg-k 100% |  31.6 MiB/s | 969.4 KiB |  00m00s
[111/191] Installing python3-ply-0:3.11 100% | 110.7 MiB/s | 566.8 KiB |  00m00s
[112/191] Installing python3-pycparser- 100% |  83.1 MiB/s | 850.9 KiB |  00m00s
[113/191] Installing python3-cffi-0:1.1 100% |  65.7 MiB/s |   1.3 MiB |  00m00s
[114/191] Installing python3-pygit2-0:1 100% |  57.5 MiB/s |   1.2 MiB |  00m00s
[115/191] Installing python3-defusedxml 100% |  22.3 MiB/s | 205.6 KiB |  00m00s
[116/191] Installing python3-pyroute2-0 100% |  55.9 MiB/s |   3.5 MiB |  00m00s
[117/191] Installing python3-distro-0:1 100% |  67.2 MiB/s | 206.3 KiB |  00m00s
[118/191] Installing python3-backoff-0: 100% |  27.2 MiB/s | 111.3 KiB |  00m00s
[119/191] Installing pigz-0:2.8-4.fc40. 100% |  78.3 MiB/s | 160.5 KiB |  00m00s
[120/191] Installing python3-templated- 100% |  30.1 MiB/s |  30.9 KiB |  00m00s
[121/191] Installing nettle-0:3.9.1-6.f 100% | 110.7 MiB/s | 793.3 KiB |  00m00s
[122/191] Installing gnutls-0:3.8.6-1.f 100% |  14.2 MiB/s |   3.2 MiB |  00m00s
[123/191] Installing glib2-0:2.80.3-1.f 100% | 123.9 MiB/s |  14.6 MiB |  00m00s
[124/191] Installing libmodulemd-0:2.15 100% |  50.2 MiB/s | 719.7 KiB |  00m00s
[125/191] Installing createrepo_c-libs- 100% |  89.5 MiB/s | 275.0 KiB |  00m00s
[126/191] Installing createrepo_c-0:1.2 100% |  48.6 MiB/s | 199.1 KiB |  00m00s
[127/191] Installing desktop-file-utils 100% |  20.4 MiB/s | 229.8 KiB |  00m00s
[128/191] Installing json-glib-0:1.8.0- 100% |  55.9 MiB/s | 572.8 KiB |  00m00s
[129/191] Installing enchant2-0:2.6.9-1 100% |  55.2 MiB/s | 169.6 KiB |  00m00s
[130/191] Installing python3-enchant-0: 100% |  28.7 MiB/s | 382.0 KiB |  00m00s
[131/191] Installing shared-mime-info-0 100% |  63.9 MiB/s |   2.6 MiB |  00m00s
>>> Running post-install scriptlet: shared-mime-info-0:2.3-5.fc40.x86_64
>>> Stop post-install scriptlet: shared-mime-info-0:2.3-5.fc40.x86_64
[132/191] Installing libuser-0:0.64-8.f 100% |  75.3 MiB/s |   2.0 MiB |  00m00s
[133/191] Installing usermode-0:1.114-9 100% |  36.2 MiB/s | 851.9 KiB |  00m00s
[134/191] Installing gobject-introspect 100% |  79.7 MiB/s | 326.3 KiB |  00m00s
[135/191] Installing python3-gobject-ba 100% |  64.9 MiB/s |   1.4 MiB |  00m00s
[136/191] Installing python3-libmodulem 100% |  15.9 MiB/s |  16.2 KiB |  00m00s
[137/191] Installing librepo-0:1.19.0-1 100% |  80.0 MiB/s | 245.8 KiB |  00m00s
[138/191] Installing libdnf-0:0.73.4-1. 100% | 101.3 MiB/s |   2.1 MiB |  00m00s
[139/191] Installing python3-libdnf-0:0 100% | 146.9 MiB/s |   3.8 MiB |  00m00s
[140/191] Installing python3-hawkey-0:0 100% | 100.5 MiB/s | 308.8 KiB |  00m00s
[141/191] Installing libxslt-0:1.1.42-1 100% |  95.0 MiB/s | 486.2 KiB |  00m00s
[142/191] Installing python3-lxml-0:5.1 100% |  23.8 MiB/s |   5.3 MiB |  00m00s
[143/191] Installing libpng-2:1.6.40-3. 100% | 118.7 MiB/s | 243.1 KiB |  00m00s
[144/191] Installing libjpeg-turbo-0:3. 100% | 152.1 MiB/s | 778.6 KiB |  00m00s
[145/191] Installing gdk-pixbuf2-0:2.42 100% |  41.5 MiB/s |   2.5 MiB |  00m00s
[146/191] Installing libappstream-glib- 100% | 118.0 MiB/s |   1.4 MiB |  00m00s
[147/191] Installing npth-0:1.7-1.fc40. 100% |  49.5 MiB/s |  50.7 KiB |  00m00s
[148/191] Installing gnupg2-0:2.4.4-1.f 100% | 106.8 MiB/s |   9.5 MiB |  00m00s
[149/191] Installing python3-utils-0:3. 100% |  20.0 MiB/s | 184.0 KiB |  00m00s
[150/191] Installing python3-progressba 100% |  85.8 MiB/s | 263.4 KiB |  00m00s
[151/191] Installing libfsverity-0:1.4- 100% |  32.8 MiB/s |  33.6 KiB |  00m00s
[152/191] Installing rpm-sign-libs-0:4. 100% |  39.3 MiB/s |  40.2 KiB |  00m00s
[153/191] Installing python3-rpm-0:4.19 100% |  85.1 MiB/s | 174.2 KiB |  00m00s
[154/191] Installing python3-rpmautospe 100% |  31.3 MiB/s | 160.2 KiB |  00m00s
[155/191] Installing python3-dnf-0:4.22 100% |  35.9 MiB/s |   2.7 MiB |  00m00s
[156/191] Installing mock-0:6.0-1.fc40. 100% |  86.7 MiB/s |   1.0 MiB |  00m00s
[157/191] Installing mock-core-configs- 100% | 795.2 KiB/s | 400.0 KiB |  00m01s
>>> Running post-install scriptlet: mock-core-configs-0:41.5-1.fc40.noarch
>>> Stop post-install scriptlet: mock-core-configs-0:41.5-1.fc40.noarch
[158/191] Installing rpmdevtools-0:9.6- 100% |  13.0 MiB/s | 226.9 KiB |  00m00s
[159/191] Installing python3-decorator- 100% |  39.1 MiB/s |  80.1 KiB |  00m00s
[160/191] Installing python3-gssapi-0:1 100% | 102.0 MiB/s |   2.8 MiB |  00m00s
[161/191] Installing python3-requests-g 100% |  21.5 MiB/s |  66.1 KiB |  00m00s
[162/191] Installing python3-koji-0:1.3 100% | 102.2 MiB/s |   2.1 MiB |  00m00s
[163/191] Installing python3-zstandard- 100% | 185.5 MiB/s |   2.0 MiB |  00m00s
[164/191] Installing python3-tomli-w-0: 100% |  15.3 MiB/s |  31.2 KiB |  00m00s
[165/191] Installing python3-pyxdg-0:0. 100% |  86.6 MiB/s | 443.6 KiB |  00m00s
[166/191] Installing python3-file-magic 100% |  30.6 MiB/s |  31.3 KiB |  00m00s
[167/191] Installing dash-0:0.5.12-3.fc 100% |   8.2 MiB/s | 168.5 KiB |  00m00s
>>> Running post-install scriptlet: dash-0:0.5.12-3.fc40.x86_64
>>> Stop post-install scriptlet: dash-0:0.5.12-3.fc40.x86_64
[168/191] Installing rpmlint-fedora-lic 100% |  11.7 MiB/s |  23.9 KiB |  00m00s
[169/191] Installing rpmlint-0:2.5.0-5. 100% |  42.9 MiB/s |   1.1 MiB |  00m00s
[170/191] Installing rpmlint-fedora-lic 100% |  15.9 MiB/s |  16.3 KiB |  00m00s
[171/191] Installing python3-smmap-0:5. 100% |  50.3 MiB/s | 205.9 KiB |  00m00s
[172/191] Installing python3-gitdb-0:4. 100% |  63.4 MiB/s | 519.7 KiB |  00m00s
[173/191] Installing python3-GitPython- 100% |  91.3 MiB/s |   1.7 MiB |  00m00s
[174/191] Installing python3-pyyaml-0:6 100% |  78.1 MiB/s | 800.2 KiB |  00m00s
[175/191] Installing python3-pycurl-0:7 100% |  48.6 MiB/s | 448.3 KiB |  00m00s
[176/191] Installing python3-cccolutils 100% |  34.9 MiB/s |  35.8 KiB |  00m00s
[177/191] Installing rpkg-common-0:1.67 100% |  13.3 MiB/s |  13.6 KiB |  00m00s
[178/191] Installing python3-cssselect- 100% |  64.7 MiB/s | 198.8 KiB |  00m00s
[179/191] Installing python3-requests-t 100% |  35.2 MiB/s | 324.7 KiB |  00m00s
[180/191] Installing python3-filelock-0 100% |  20.8 MiB/s |  63.8 KiB |  00m00s
[181/191] Installing python3-pluggy-0:1 100% |  14.1 MiB/s | 188.3 KiB |  00m00s
[182/191] Installing python3-iniconfig- 100% |   5.7 MiB/s |  23.4 KiB |  00m00s
[183/191] Installing python3-pytest-0:7 100% |  46.3 MiB/s |  15.2 MiB |  00m00s
[184/191] Installing python3-copr-0:2.0 100% |  32.5 MiB/s | 266.5 KiB |  00m00s
[185/191] Installing python3-pyquery-0: 100% |  41.0 MiB/s | 252.0 KiB |  00m00s
[186/191] Installing python3-rpkg-0:1.6 100% | 130.7 MiB/s |   1.0 MiB |  00m00s
[187/191] Installing python3-specfile-0 100% |  93.3 MiB/s | 573.1 KiB |  00m00s
[188/191] Installing systemd-rpm-macros 100% |  11.2 MiB/s |  11.4 KiB |  00m00s
[189/191] Installing python3-unidiff-0: 100% |  26.9 MiB/s |  82.7 KiB |  00m00s
[190/191] Installing python3-pam-0:2.0. 100% |  15.3 MiB/s |  62.6 KiB |  00m00s
[191/191] Installing python3-ansicolors 100% |  41.0 KiB/s |  49.5 KiB |  00m01s
>>> Running trigger-install scriptlet: glibc-common-0:2.39-37.fc40.x86_64
>>> Stop trigger-install scriptlet: glibc-common-0:2.39-37.fc40.x86_64
>>> Running trigger-install scriptlet: info-0:7.1-2.fc40.x86_64
>>> Stop trigger-install scriptlet: info-0:7.1-2.fc40.x86_64
>>> Running trigger-install scriptlet: systemd-0:255.16-1.fc40.x86_64
>>> Stop trigger-install scriptlet: systemd-0:255.16-1.fc40.x86_64
>>> Running trigger-install scriptlet: systemd-0:255.16-1.fc40.x86_64
>>> Stop trigger-install scriptlet: systemd-0:255.16-1.fc40.x86_64
>>> Running trigger-install scriptlet: systemd-0:255.16-1.fc40.x86_64
>>> Stop trigger-install scriptlet: systemd-0:255.16-1.fc40.x86_64
>>> Running trigger-install scriptlet: systemd-0:255.16-1.fc40.x86_64
>>> Stop trigger-install scriptlet: systemd-0:255.16-1.fc40.x86_64
>>> Running trigger-install scriptlet: systemd-0:255.16-1.fc40.x86_64
>>> Stop trigger-install scriptlet: systemd-0:255.16-1.fc40.x86_64
>>> Running trigger-install scriptlet: systemd-0:255.16-1.fc40.x86_64
>>> Stop trigger-install scriptlet: systemd-0:255.16-1.fc40.x86_64
>>> Running trigger-install scriptlet: glib2-0:2.80.3-1.fc40.x86_64
>>> Stop trigger-install scriptlet: glib2-0:2.80.3-1.fc40.x86_64
>>> Running trigger-install scriptlet: desktop-file-utils-0:0.26-12.fc40.x86_64
>>> Stop trigger-install scriptlet: desktop-file-utils-0:0.26-12.fc40.x86_64
>>> Running trigger-install scriptlet: shared-mime-info-0:2.3-5.fc40.x86_64
>>> Stop trigger-install scriptlet: shared-mime-info-0:2.3-5.fc40.x86_64
Building target platforms: x86_64
Building for target x86_64
setting SOURCE_DATE_EPOCH=1738195200
Executing(%generate_buildrequires): /bin/sh -e /var/tmp/rpm-tmp.trA46h
+ umask 022
+ cd /builddir/build/BUILD
+ cd rebasehelper-0.29.2.post1.dev2+gcb25188
+ echo pyproject-rpm-macros
+ echo python3-devel
+ echo 'python3dist(packaging)'
+ echo 'python3dist(pip) >= 19'
+ '[' -f pyproject.toml ']'
+ echo '(python3dist(tomli) if python3-devel < 3.11)'
+ rm -rfv '*.dist-info/'
+ '[' -f /usr/bin/python3 ']'
+ mkdir -p /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/.pyproject-builddir
+ echo -n
+ CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ VALAFLAGS=-g
+ RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Cforce-frame-pointers=yes --cap-lints=warn'
+ LDFLAGS='-Wl,-z,relro -Wl,--as-needed  -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -Wl,--build-id=sha1  '
+ LT_SYS_LIBRARY_PATH=/usr/lib64:
+ CC=gcc
+ CXX=g++
+ TMPDIR=/builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/.pyproject-builddir
+ RPM_TOXENV=py312
+ HOSTNAME=rpmbuild
+ /usr/bin/python3 -Bs /usr/lib/rpm/redhat/pyproject_buildrequires.py --generate-extras --python3_pkgversion 3 --wheeldir /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/pyproject-wheeldir --output /builddir/build/BUILD/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64-pyproject-buildrequires -x testing
Handling setuptools>=45 from build-system.requires
Requirement satisfied: setuptools>=45
   (installed: setuptools 69.0.3)
Handling setuptools_scm[toml] from build-system.requires
Requirement satisfied: setuptools_scm[toml]
   (installed: setuptools_scm 8.0.4)
   (extras are currently not checked)
/usr/lib/python3.12/site-packages/setuptools_scm/git.py:308: UserWarning: git archive did not support describe output
  warnings.warn("git archive did not support describe output")
/usr/lib/python3.12/site-packages/setuptools_scm/git.py:327: UserWarning: unprocessed git archival found (no export subst applied)
  warnings.warn("unprocessed git archival found (no export subst applied)")
running egg_info
writing rebasehelper.egg-info/PKG-INFO
writing dependency_links to rebasehelper.egg-info/dependency_links.txt
writing entry points to rebasehelper.egg-info/entry_points.txt
writing requirements to rebasehelper.egg-info/requires.txt
writing top-level names to rebasehelper.egg-info/top_level.txt
ERROR setuptools_scm._file_finders.git listing git files failed - pretending there aren't any
reading manifest file 'rebasehelper.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
warning: no previously-included files matching '*.pyc' found anywhere in distribution
adding license file 'LICENSE'
writing manifest file 'rebasehelper.egg-info/SOURCES.txt'
Handling wheel from get_requires_for_build_wheel
Requirement satisfied: wheel
   (installed: wheel 0.41.2)
/usr/lib/python3.12/site-packages/setuptools_scm/git.py:308: UserWarning: git archive did not support describe output
  warnings.warn("git archive did not support describe output")
/usr/lib/python3.12/site-packages/setuptools_scm/git.py:327: UserWarning: unprocessed git archival found (no export subst applied)
  warnings.warn("unprocessed git archival found (no export subst applied)")
running dist_info
writing rebasehelper.egg-info/PKG-INFO
writing dependency_links to rebasehelper.egg-info/dependency_links.txt
writing entry points to rebasehelper.egg-info/entry_points.txt
writing requirements to rebasehelper.egg-info/requires.txt
writing top-level names to rebasehelper.egg-info/top_level.txt
ERROR setuptools_scm._file_finders.git listing git files failed - pretending there aren't any
reading manifest file 'rebasehelper.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
warning: no previously-included files matching '*.pyc' found anywhere in distribution
adding license file 'LICENSE'
writing manifest file 'rebasehelper.egg-info/SOURCES.txt'
creating '/builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info'
Handling ansicolors from hook generated metadata: Requires-Dist (rebasehelper)
Requirement satisfied: ansicolors
   (installed: ansicolors 1.1.8)
Handling copr from hook generated metadata: Requires-Dist (rebasehelper)
Requirement satisfied: copr
   (installed: copr 2.0)
Handling pyquery from hook generated metadata: Requires-Dist (rebasehelper)
Requirement satisfied: pyquery
   (installed: pyquery 1.4.3)
Handling python-pam from hook generated metadata: Requires-Dist (rebasehelper)
Requirement satisfied: python-pam
   (installed: python-pam 2.0.2)
Handling requests from hook generated metadata: Requires-Dist (rebasehelper)
Requirement satisfied: requests
   (installed: requests 2.31.0)
Handling rpkg from hook generated metadata: Requires-Dist (rebasehelper)
Requirement satisfied: rpkg
   (installed: rpkg 1.67)
Handling unidiff from hook generated metadata: Requires-Dist (rebasehelper)
Requirement satisfied: unidiff
   (installed: unidiff 0.7.5)
Handling GitPython from hook generated metadata: Requires-Dist (rebasehelper)
Requirement satisfied: GitPython
   (installed: GitPython 3.1.40)
Handling specfile from hook generated metadata: Requires-Dist (rebasehelper)
Requirement satisfied: specfile
   (installed: specfile 0.33.0)
Handling pytest ; extra == 'testing' from hook generated metadata: Requires-Dist (rebasehelper)
Requirement satisfied: pytest ; extra == 'testing'
   (installed: pytest 7.4.3)
+ cat /builddir/build/BUILD/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64-pyproject-buildrequires
+ rm -rfv rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/
removed 'rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/entry_points.txt'
removed 'rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/top_level.txt'
removed 'rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/METADATA'
removed 'rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/LICENSE'
removed directory 'rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/'
+ RPM_EC=0
++ jobs -p
+ exit 0
Wrote: /builddir/build/SRPMS/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.buildreqs.nosrc.rpm
INFO: Going to install missing dynamic buildrequires
Updating and loading repositories:
 updates                                100% |   1.0 MiB/s |  29.7 KiB |  00m00s
 fedora                                 100% |   1.3 MiB/s |  32.2 KiB |  00m00s
 Copr repository                        100% |  43.1 KiB/s |   1.5 KiB |  00m00s
Repositories loaded.
Package "make-1:4.4.1-6.fc40.x86_64" is already installed.Nothing to do.

Package "pandoc-3.1.3-29.fc40.x86_64" is already installed.
Package "pyproject-rpm-macros-1.16.4-1.fc40.noarch" is already installed.
Package "python3-devel-3.12.8-2.fc40.x86_64" is already installed.
Package "python3-sphinx-1:7.2.6-6.fc40.noarch" is already installed.
Package "python3-sphinx_rtd_theme-2.0.0-3.fc40.noarch" is already installed.
Package "python3-ansicolors-1.1.8-25.fc40.noarch" is already installed.
Package "python3-copr-2.0-1.fc40.noarch" is already installed.
Package "python3-GitPython-3.1.40-4.fc40.noarch" is already installed.
Package "python3-packaging-23.2-4.fc40.noarch" is already installed.
Package "python3-pip-23.3.2-2.fc40.noarch" is already installed.
Package "python3-pyquery-1.4.3-16.fc40.noarch" is already installed.
Package "python3-pytest-7.4.3-3.fc40.noarch" is already installed.
Package "python3-pam-2.0.2-8.fc40.noarch" is already installed.
Package "python3-requests-2.31.0-3.fc40.noarch" is already installed.
Package "python3-rpkg-1.67-5.fc40.noarch" is already installed.
Package "python3-setuptools-69.0.3-4.fc40.noarch" is already installed.
Package "python3-setuptools_scm-8.0.4-3.fc40.noarch" is already installed.
Package "python3-setuptools_scm+toml-8.0.4-3.fc40.noarch" is already installed.
Package "python3-specfile-0.33.0-1.fc40.noarch" is already installed.
Package "python3-unidiff-0.7.5-3.fc40.noarch" is already installed.
Package "python3-wheel-1:0.41.2-3.fc40.noarch" is already installed.

Building target platforms: x86_64
Building for target x86_64
setting SOURCE_DATE_EPOCH=1738195200
Executing(%generate_buildrequires): /bin/sh -e /var/tmp/rpm-tmp.vbaaml
+ umask 022
+ cd /builddir/build/BUILD
+ cd rebasehelper-0.29.2.post1.dev2+gcb25188
+ echo pyproject-rpm-macros
+ echo python3-devel
+ echo 'python3dist(packaging)'
+ echo 'python3dist(pip) >= 19'
+ '[' -f pyproject.toml ']'
+ echo '(python3dist(tomli) if python3-devel < 3.11)'
+ rm -rfv '*.dist-info/'
+ '[' -f /usr/bin/python3 ']'
+ mkdir -p /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/.pyproject-builddir
+ echo -n
+ CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ VALAFLAGS=-g
+ RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Cforce-frame-pointers=yes --cap-lints=warn'
+ LDFLAGS='-Wl,-z,relro -Wl,--as-needed  -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -Wl,--build-id=sha1  '
+ LT_SYS_LIBRARY_PATH=/usr/lib64:
+ CC=gcc
+ CXX=g++
+ TMPDIR=/builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/.pyproject-builddir
+ RPM_TOXENV=py312
+ HOSTNAME=rpmbuild
+ /usr/bin/python3 -Bs /usr/lib/rpm/redhat/pyproject_buildrequires.py --generate-extras --python3_pkgversion 3 --wheeldir /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/pyproject-wheeldir --output /builddir/build/BUILD/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64-pyproject-buildrequires -x testing
Handling setuptools>=45 from build-system.requires
Requirement satisfied: setuptools>=45
   (installed: setuptools 69.0.3)
Handling setuptools_scm[toml] from build-system.requires
Requirement satisfied: setuptools_scm[toml]
   (installed: setuptools_scm 8.0.4)
   (extras are currently not checked)
/usr/lib/python3.12/site-packages/setuptools_scm/git.py:308: UserWarning: git archive did not support describe output
  warnings.warn("git archive did not support describe output")
/usr/lib/python3.12/site-packages/setuptools_scm/git.py:327: UserWarning: unprocessed git archival found (no export subst applied)
  warnings.warn("unprocessed git archival found (no export subst applied)")
running egg_info
writing rebasehelper.egg-info/PKG-INFO
writing dependency_links to rebasehelper.egg-info/dependency_links.txt
writing entry points to rebasehelper.egg-info/entry_points.txt
writing requirements to rebasehelper.egg-info/requires.txt
writing top-level names to rebasehelper.egg-info/top_level.txt
ERROR setuptools_scm._file_finders.git listing git files failed - pretending there aren't any
reading manifest file 'rebasehelper.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
warning: no previously-included files matching '*.pyc' found anywhere in distribution
adding license file 'LICENSE'
writing manifest file 'rebasehelper.egg-info/SOURCES.txt'
Handling wheel from get_requires_for_build_wheel
Requirement satisfied: wheel
   (installed: wheel 0.41.2)
/usr/lib/python3.12/site-packages/setuptools_scm/git.py:308: UserWarning: git archive did not support describe output
  warnings.warn("git archive did not support describe output")
/usr/lib/python3.12/site-packages/setuptools_scm/git.py:327: UserWarning: unprocessed git archival found (no export subst applied)
  warnings.warn("unprocessed git archival found (no export subst applied)")
running dist_info
writing rebasehelper.egg-info/PKG-INFO
writing dependency_links to rebasehelper.egg-info/dependency_links.txt
writing entry points to rebasehelper.egg-info/entry_points.txt
writing requirements to rebasehelper.egg-info/requires.txt
writing top-level names to rebasehelper.egg-info/top_level.txt
ERROR setuptools_scm._file_finders.git listing git files failed - pretending there aren't any
reading manifest file 'rebasehelper.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
warning: no previously-included files matching '*.pyc' found anywhere in distribution
adding license file 'LICENSE'
writing manifest file 'rebasehelper.egg-info/SOURCES.txt'
creating '/builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info'
Handling ansicolors from hook generated metadata: Requires-Dist (rebasehelper)
Requirement satisfied: ansicolors
   (installed: ansicolors 1.1.8)
Handling copr from hook generated metadata: Requires-Dist (rebasehelper)
Requirement satisfied: copr
   (installed: copr 2.0)
Handling pyquery from hook generated metadata: Requires-Dist (rebasehelper)
Requirement satisfied: pyquery
   (installed: pyquery 1.4.3)
Handling python-pam from hook generated metadata: Requires-Dist (rebasehelper)
Requirement satisfied: python-pam
   (installed: python-pam 2.0.2)
Handling requests from hook generated metadata: Requires-Dist (rebasehelper)
Requirement satisfied: requests
   (installed: requests 2.31.0)
Handling rpkg from hook generated metadata: Requires-Dist (rebasehelper)
Requirement satisfied: rpkg
   (installed: rpkg 1.67)
Handling unidiff from hook generated metadata: Requires-Dist (rebasehelper)
Requirement satisfied: unidiff
   (installed: unidiff 0.7.5)
Handling GitPython from hook generated metadata: Requires-Dist (rebasehelper)
Requirement satisfied: GitPython
   (installed: GitPython 3.1.40)
Handling specfile from hook generated metadata: Requires-Dist (rebasehelper)
Requirement satisfied: specfile
   (installed: specfile 0.33.0)
Handling pytest ; extra == 'testing' from hook generated metadata: Requires-Dist (rebasehelper)
Requirement satisfied: pytest ; extra == 'testing'
   (installed: pytest 7.4.3)
+ cat /builddir/build/BUILD/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64-pyproject-buildrequires
+ rm -rfv rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/
removed 'rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/entry_points.txt'
removed 'rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/top_level.txt'
removed 'rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/METADATA'
removed 'rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/LICENSE'
removed directory 'rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/'
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.EzCJ3u
+ umask 022
+ cd /builddir/build/BUILD
+ CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ export CFLAGS
+ CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ export CXXFLAGS
+ FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ export FFLAGS
+ FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ export FCFLAGS
+ VALAFLAGS=-g
+ export VALAFLAGS
+ RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Cforce-frame-pointers=yes -Clink-arg=-specs=/usr/lib/rpm/redhat/redhat-package-notes --cap-lints=warn'
+ export RUSTFLAGS
+ LDFLAGS='-Wl,-z,relro -Wl,--as-needed  -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes '
+ export LDFLAGS
+ LT_SYS_LIBRARY_PATH=/usr/lib64:
+ export LT_SYS_LIBRARY_PATH
+ CC=gcc
+ export CC
+ CXX=g++
+ export CXX
+ cd rebasehelper-0.29.2.post1.dev2+gcb25188
+ mkdir -p /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/.pyproject-builddir
+ CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ VALAFLAGS=-g
+ RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Cforce-frame-pointers=yes -Clink-arg=-specs=/usr/lib/rpm/redhat/redhat-package-notes --cap-lints=warn'
+ LDFLAGS='-Wl,-z,relro -Wl,--as-needed  -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes '
+ LT_SYS_LIBRARY_PATH=/usr/lib64:
+ CC=gcc
+ CXX=g++
+ TMPDIR=/builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/.pyproject-builddir
+ /usr/bin/python3 -Bs /usr/lib/rpm/redhat/pyproject_wheel.py /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/pyproject-wheeldir
Processing /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188
  Preparing metadata (pyproject.toml): started
  Running command Preparing metadata (pyproject.toml)
  /usr/lib/python3.12/site-packages/setuptools_scm/git.py:308: UserWarning: git archive did not support describe output
    warnings.warn("git archive did not support describe output")
  /usr/lib/python3.12/site-packages/setuptools_scm/git.py:327: UserWarning: unprocessed git archival found (no export subst applied)
    warnings.warn("unprocessed git archival found (no export subst applied)")
  running dist_info
  creating /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/.pyproject-builddir/pip-modern-metadata-6r5wswu2/rebasehelper.egg-info
  writing /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/.pyproject-builddir/pip-modern-metadata-6r5wswu2/rebasehelper.egg-info/PKG-INFO
  writing dependency_links to /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/.pyproject-builddir/pip-modern-metadata-6r5wswu2/rebasehelper.egg-info/dependency_links.txt
  writing entry points to /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/.pyproject-builddir/pip-modern-metadata-6r5wswu2/rebasehelper.egg-info/entry_points.txt
  writing requirements to /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/.pyproject-builddir/pip-modern-metadata-6r5wswu2/rebasehelper.egg-info/requires.txt
  writing top-level names to /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/.pyproject-builddir/pip-modern-metadata-6r5wswu2/rebasehelper.egg-info/top_level.txt
  writing manifest file '/builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/.pyproject-builddir/pip-modern-metadata-6r5wswu2/rebasehelper.egg-info/SOURCES.txt'
  ERROR setuptools_scm._file_finders.git listing git files failed - pretending there aren't any
  reading manifest file '/builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/.pyproject-builddir/pip-modern-metadata-6r5wswu2/rebasehelper.egg-info/SOURCES.txt'
  reading manifest template 'MANIFEST.in'
  warning: no previously-included files matching '*.pyc' found anywhere in distribution
  adding license file 'LICENSE'
  writing manifest file '/builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/.pyproject-builddir/pip-modern-metadata-6r5wswu2/rebasehelper.egg-info/SOURCES.txt'
  creating '/builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/.pyproject-builddir/pip-modern-metadata-6r5wswu2/rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info'
  Preparing metadata (pyproject.toml): finished with status 'done'
Building wheels for collected packages: rebasehelper
  Building wheel for rebasehelper (pyproject.toml): started
  Running command Building wheel for rebasehelper (pyproject.toml)
  /usr/lib/python3.12/site-packages/setuptools_scm/git.py:308: UserWarning: git archive did not support describe output
    warnings.warn("git archive did not support describe output")
  /usr/lib/python3.12/site-packages/setuptools_scm/git.py:327: UserWarning: unprocessed git archival found (no export subst applied)
    warnings.warn("unprocessed git archival found (no export subst applied)")
  running bdist_wheel
  running build
  running build_py
  creating build
  creating build/lib
  creating build/lib/rebasehelper
  copying rebasehelper/__init__.py -> build/lib/rebasehelper
  copying rebasehelper/application.py -> build/lib/rebasehelper
  copying rebasehelper/archive.py -> build/lib/rebasehelper
  copying rebasehelper/argument_parser.py -> build/lib/rebasehelper
  copying rebasehelper/cli.py -> build/lib/rebasehelper
  copying rebasehelper/completion.py -> build/lib/rebasehelper
  copying rebasehelper/config.py -> build/lib/rebasehelper
  copying rebasehelper/constants.py -> build/lib/rebasehelper
  copying rebasehelper/exceptions.py -> build/lib/rebasehelper
  copying rebasehelper/logger.py -> build/lib/rebasehelper
  copying rebasehelper/options.py -> build/lib/rebasehelper
  copying rebasehelper/patcher.py -> build/lib/rebasehelper
  copying rebasehelper/results_store.py -> build/lib/rebasehelper
  copying rebasehelper/sample_config.py -> build/lib/rebasehelper
  copying rebasehelper/specfile.py -> build/lib/rebasehelper
  copying rebasehelper/temporary_environment.py -> build/lib/rebasehelper
  copying rebasehelper/types.py -> build/lib/rebasehelper
  creating build/lib/rebasehelper/helpers
  copying rebasehelper/helpers/__init__.py -> build/lib/rebasehelper/helpers
  copying rebasehelper/helpers/bugzilla_helper.py -> build/lib/rebasehelper/helpers
  copying rebasehelper/helpers/console_helper.py -> build/lib/rebasehelper/helpers
  copying rebasehelper/helpers/copr_helper.py -> build/lib/rebasehelper/helpers
  copying rebasehelper/helpers/download_helper.py -> build/lib/rebasehelper/helpers
  copying rebasehelper/helpers/git_helper.py -> build/lib/rebasehelper/helpers
  copying rebasehelper/helpers/input_helper.py -> build/lib/rebasehelper/helpers
  copying rebasehelper/helpers/koji_helper.py -> build/lib/rebasehelper/helpers
  copying rebasehelper/helpers/lookaside_cache_helper.py -> build/lib/rebasehelper/helpers
  copying rebasehelper/helpers/path_helper.py -> build/lib/rebasehelper/helpers
  copying rebasehelper/helpers/process_helper.py -> build/lib/rebasehelper/helpers
  copying rebasehelper/helpers/rpm_helper.py -> build/lib/rebasehelper/helpers
  creating build/lib/rebasehelper/plugins
  copying rebasehelper/plugins/__init__.py -> build/lib/rebasehelper/plugins
  copying rebasehelper/plugins/plugin.py -> build/lib/rebasehelper/plugins
  copying rebasehelper/plugins/plugin_collection.py -> build/lib/rebasehelper/plugins
  copying rebasehelper/plugins/plugin_loader.py -> build/lib/rebasehelper/plugins
  copying rebasehelper/plugins/plugin_manager.py -> build/lib/rebasehelper/plugins
  creating build/lib/rebasehelper/plugins/build_log_hooks
  copying rebasehelper/plugins/build_log_hooks/__init__.py -> build/lib/rebasehelper/plugins/build_log_hooks
  copying rebasehelper/plugins/build_log_hooks/files.py -> build/lib/rebasehelper/plugins/build_log_hooks
  creating build/lib/rebasehelper/plugins/build_tools
  copying rebasehelper/plugins/build_tools/__init__.py -> build/lib/rebasehelper/plugins/build_tools
  creating build/lib/rebasehelper/plugins/checkers
  copying rebasehelper/plugins/checkers/__init__.py -> build/lib/rebasehelper/plugins/checkers
  copying rebasehelper/plugins/checkers/abipkgdiff.py -> build/lib/rebasehelper/plugins/checkers
  copying rebasehelper/plugins/checkers/csmock.py -> build/lib/rebasehelper/plugins/checkers
  copying rebasehelper/plugins/checkers/licensecheck.py -> build/lib/rebasehelper/plugins/checkers
  copying rebasehelper/plugins/checkers/pkgdiff.py -> build/lib/rebasehelper/plugins/checkers
  copying rebasehelper/plugins/checkers/rpmdiff.py -> build/lib/rebasehelper/plugins/checkers
  copying rebasehelper/plugins/checkers/rpminspect.py -> build/lib/rebasehelper/plugins/checkers
  copying rebasehelper/plugins/checkers/rpminspect_rpm.py -> build/lib/rebasehelper/plugins/checkers
  copying rebasehelper/plugins/checkers/rpminspect_srpm.py -> build/lib/rebasehelper/plugins/checkers
  copying rebasehelper/plugins/checkers/sonamecheck.py -> build/lib/rebasehelper/plugins/checkers
  creating build/lib/rebasehelper/plugins/output_tools
  copying rebasehelper/plugins/output_tools/__init__.py -> build/lib/rebasehelper/plugins/output_tools
  copying rebasehelper/plugins/output_tools/json_.py -> build/lib/rebasehelper/plugins/output_tools
  copying rebasehelper/plugins/output_tools/text.py -> build/lib/rebasehelper/plugins/output_tools
  creating build/lib/rebasehelper/plugins/spec_hooks
  copying rebasehelper/plugins/spec_hooks/__init__.py -> build/lib/rebasehelper/plugins/spec_hooks
  copying rebasehelper/plugins/spec_hooks/commit_hash_updater.py -> build/lib/rebasehelper/plugins/spec_hooks
  copying rebasehelper/plugins/spec_hooks/escape_macros.py -> build/lib/rebasehelper/plugins/spec_hooks
  copying rebasehelper/plugins/spec_hooks/paths_to_rpm_macros.py -> build/lib/rebasehelper/plugins/spec_hooks
  copying rebasehelper/plugins/spec_hooks/pypi_url_fix.py -> build/lib/rebasehelper/plugins/spec_hooks
  copying rebasehelper/plugins/spec_hooks/replace_old_version.py -> build/lib/rebasehelper/plugins/spec_hooks
  copying rebasehelper/plugins/spec_hooks/ruby_helper.py -> build/lib/rebasehelper/plugins/spec_hooks
  copying rebasehelper/plugins/spec_hooks/typo_fix.py -> build/lib/rebasehelper/plugins/spec_hooks
  creating build/lib/rebasehelper/plugins/versioneers
  copying rebasehelper/plugins/versioneers/__init__.py -> build/lib/rebasehelper/plugins/versioneers
  copying rebasehelper/plugins/versioneers/anitya.py -> build/lib/rebasehelper/plugins/versioneers
  copying rebasehelper/plugins/versioneers/cpan.py -> build/lib/rebasehelper/plugins/versioneers
  copying rebasehelper/plugins/versioneers/hackage.py -> build/lib/rebasehelper/plugins/versioneers
  copying rebasehelper/plugins/versioneers/npmjs.py -> build/lib/rebasehelper/plugins/versioneers
  copying rebasehelper/plugins/versioneers/pypi.py -> build/lib/rebasehelper/plugins/versioneers
  copying rebasehelper/plugins/versioneers/rubygems.py -> build/lib/rebasehelper/plugins/versioneers
  creating build/lib/rebasehelper/plugins/build_tools/rpm
  copying rebasehelper/plugins/build_tools/rpm/__init__.py -> build/lib/rebasehelper/plugins/build_tools/rpm
  copying rebasehelper/plugins/build_tools/rpm/copr_.py -> build/lib/rebasehelper/plugins/build_tools/rpm
  copying rebasehelper/plugins/build_tools/rpm/koji_.py -> build/lib/rebasehelper/plugins/build_tools/rpm
  copying rebasehelper/plugins/build_tools/rpm/mock.py -> build/lib/rebasehelper/plugins/build_tools/rpm
  copying rebasehelper/plugins/build_tools/rpm/rpmbuild.py -> build/lib/rebasehelper/plugins/build_tools/rpm
  creating build/lib/rebasehelper/plugins/build_tools/srpm
  copying rebasehelper/plugins/build_tools/srpm/__init__.py -> build/lib/rebasehelper/plugins/build_tools/srpm
  copying rebasehelper/plugins/build_tools/srpm/mock.py -> build/lib/rebasehelper/plugins/build_tools/srpm
  copying rebasehelper/plugins/build_tools/srpm/rpmbuild.py -> build/lib/rebasehelper/plugins/build_tools/srpm
  running egg_info
  writing rebasehelper.egg-info/PKG-INFO
  writing dependency_links to rebasehelper.egg-info/dependency_links.txt
  writing entry points to rebasehelper.egg-info/entry_points.txt
  writing requirements to rebasehelper.egg-info/requires.txt
  writing top-level names to rebasehelper.egg-info/top_level.txt
  ERROR setuptools_scm._file_finders.git listing git files failed - pretending there aren't any
  reading manifest file 'rebasehelper.egg-info/SOURCES.txt'
  reading manifest template 'MANIFEST.in'
  warning: no previously-included files matching '*.pyc' found anywhere in distribution
  adding license file 'LICENSE'
  writing manifest file 'rebasehelper.egg-info/SOURCES.txt'
  installing to build/bdist.linux-x86_64/wheel
  running install
  running install_lib
  creating build/bdist.linux-x86_64
  creating build/bdist.linux-x86_64/wheel
  creating build/bdist.linux-x86_64/wheel/rebasehelper
  copying build/lib/rebasehelper/__init__.py -> build/bdist.linux-x86_64/wheel/rebasehelper
  copying build/lib/rebasehelper/application.py -> build/bdist.linux-x86_64/wheel/rebasehelper
  copying build/lib/rebasehelper/archive.py -> build/bdist.linux-x86_64/wheel/rebasehelper
  copying build/lib/rebasehelper/argument_parser.py -> build/bdist.linux-x86_64/wheel/rebasehelper
  copying build/lib/rebasehelper/cli.py -> build/bdist.linux-x86_64/wheel/rebasehelper
  copying build/lib/rebasehelper/completion.py -> build/bdist.linux-x86_64/wheel/rebasehelper
  copying build/lib/rebasehelper/config.py -> build/bdist.linux-x86_64/wheel/rebasehelper
  copying build/lib/rebasehelper/constants.py -> build/bdist.linux-x86_64/wheel/rebasehelper
  copying build/lib/rebasehelper/exceptions.py -> build/bdist.linux-x86_64/wheel/rebasehelper
  copying build/lib/rebasehelper/logger.py -> build/bdist.linux-x86_64/wheel/rebasehelper
  copying build/lib/rebasehelper/options.py -> build/bdist.linux-x86_64/wheel/rebasehelper
  copying build/lib/rebasehelper/patcher.py -> build/bdist.linux-x86_64/wheel/rebasehelper
  copying build/lib/rebasehelper/results_store.py -> build/bdist.linux-x86_64/wheel/rebasehelper
  copying build/lib/rebasehelper/sample_config.py -> build/bdist.linux-x86_64/wheel/rebasehelper
  copying build/lib/rebasehelper/specfile.py -> build/bdist.linux-x86_64/wheel/rebasehelper
  copying build/lib/rebasehelper/temporary_environment.py -> build/bdist.linux-x86_64/wheel/rebasehelper
  copying build/lib/rebasehelper/types.py -> build/bdist.linux-x86_64/wheel/rebasehelper
  creating build/bdist.linux-x86_64/wheel/rebasehelper/helpers
  copying build/lib/rebasehelper/helpers/__init__.py -> build/bdist.linux-x86_64/wheel/rebasehelper/helpers
  copying build/lib/rebasehelper/helpers/bugzilla_helper.py -> build/bdist.linux-x86_64/wheel/rebasehelper/helpers
  copying build/lib/rebasehelper/helpers/console_helper.py -> build/bdist.linux-x86_64/wheel/rebasehelper/helpers
  copying build/lib/rebasehelper/helpers/copr_helper.py -> build/bdist.linux-x86_64/wheel/rebasehelper/helpers
  copying build/lib/rebasehelper/helpers/download_helper.py -> build/bdist.linux-x86_64/wheel/rebasehelper/helpers
  copying build/lib/rebasehelper/helpers/git_helper.py -> build/bdist.linux-x86_64/wheel/rebasehelper/helpers
  copying build/lib/rebasehelper/helpers/input_helper.py -> build/bdist.linux-x86_64/wheel/rebasehelper/helpers
  copying build/lib/rebasehelper/helpers/koji_helper.py -> build/bdist.linux-x86_64/wheel/rebasehelper/helpers
  copying build/lib/rebasehelper/helpers/lookaside_cache_helper.py -> build/bdist.linux-x86_64/wheel/rebasehelper/helpers
  copying build/lib/rebasehelper/helpers/path_helper.py -> build/bdist.linux-x86_64/wheel/rebasehelper/helpers
  copying build/lib/rebasehelper/helpers/process_helper.py -> build/bdist.linux-x86_64/wheel/rebasehelper/helpers
  copying build/lib/rebasehelper/helpers/rpm_helper.py -> build/bdist.linux-x86_64/wheel/rebasehelper/helpers
  creating build/bdist.linux-x86_64/wheel/rebasehelper/plugins
  copying build/lib/rebasehelper/plugins/__init__.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins
  copying build/lib/rebasehelper/plugins/plugin.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins
  copying build/lib/rebasehelper/plugins/plugin_collection.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins
  copying build/lib/rebasehelper/plugins/plugin_loader.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins
  copying build/lib/rebasehelper/plugins/plugin_manager.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins
  creating build/bdist.linux-x86_64/wheel/rebasehelper/plugins/build_log_hooks
  copying build/lib/rebasehelper/plugins/build_log_hooks/__init__.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/build_log_hooks
  copying build/lib/rebasehelper/plugins/build_log_hooks/files.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/build_log_hooks
  creating build/bdist.linux-x86_64/wheel/rebasehelper/plugins/build_tools
  copying build/lib/rebasehelper/plugins/build_tools/__init__.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/build_tools
  creating build/bdist.linux-x86_64/wheel/rebasehelper/plugins/build_tools/rpm
  copying build/lib/rebasehelper/plugins/build_tools/rpm/__init__.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/build_tools/rpm
  copying build/lib/rebasehelper/plugins/build_tools/rpm/copr_.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/build_tools/rpm
  copying build/lib/rebasehelper/plugins/build_tools/rpm/koji_.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/build_tools/rpm
  copying build/lib/rebasehelper/plugins/build_tools/rpm/mock.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/build_tools/rpm
  copying build/lib/rebasehelper/plugins/build_tools/rpm/rpmbuild.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/build_tools/rpm
  creating build/bdist.linux-x86_64/wheel/rebasehelper/plugins/build_tools/srpm
  copying build/lib/rebasehelper/plugins/build_tools/srpm/__init__.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/build_tools/srpm
  copying build/lib/rebasehelper/plugins/build_tools/srpm/mock.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/build_tools/srpm
  copying build/lib/rebasehelper/plugins/build_tools/srpm/rpmbuild.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/build_tools/srpm
  creating build/bdist.linux-x86_64/wheel/rebasehelper/plugins/checkers
  copying build/lib/rebasehelper/plugins/checkers/__init__.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/checkers
  copying build/lib/rebasehelper/plugins/checkers/abipkgdiff.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/checkers
  copying build/lib/rebasehelper/plugins/checkers/csmock.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/checkers
  copying build/lib/rebasehelper/plugins/checkers/licensecheck.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/checkers
  copying build/lib/rebasehelper/plugins/checkers/pkgdiff.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/checkers
  copying build/lib/rebasehelper/plugins/checkers/rpmdiff.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/checkers
  copying build/lib/rebasehelper/plugins/checkers/rpminspect.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/checkers
  copying build/lib/rebasehelper/plugins/checkers/rpminspect_rpm.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/checkers
  copying build/lib/rebasehelper/plugins/checkers/rpminspect_srpm.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/checkers
  copying build/lib/rebasehelper/plugins/checkers/sonamecheck.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/checkers
  creating build/bdist.linux-x86_64/wheel/rebasehelper/plugins/output_tools
  copying build/lib/rebasehelper/plugins/output_tools/__init__.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/output_tools
  copying build/lib/rebasehelper/plugins/output_tools/json_.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/output_tools
  copying build/lib/rebasehelper/plugins/output_tools/text.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/output_tools
  creating build/bdist.linux-x86_64/wheel/rebasehelper/plugins/spec_hooks
  copying build/lib/rebasehelper/plugins/spec_hooks/__init__.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/spec_hooks
  copying build/lib/rebasehelper/plugins/spec_hooks/commit_hash_updater.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/spec_hooks
  copying build/lib/rebasehelper/plugins/spec_hooks/escape_macros.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/spec_hooks
  copying build/lib/rebasehelper/plugins/spec_hooks/paths_to_rpm_macros.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/spec_hooks
  copying build/lib/rebasehelper/plugins/spec_hooks/pypi_url_fix.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/spec_hooks
  copying build/lib/rebasehelper/plugins/spec_hooks/replace_old_version.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/spec_hooks
  copying build/lib/rebasehelper/plugins/spec_hooks/ruby_helper.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/spec_hooks
  copying build/lib/rebasehelper/plugins/spec_hooks/typo_fix.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/spec_hooks
  creating build/bdist.linux-x86_64/wheel/rebasehelper/plugins/versioneers
  copying build/lib/rebasehelper/plugins/versioneers/__init__.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/versioneers
  copying build/lib/rebasehelper/plugins/versioneers/anitya.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/versioneers
  copying build/lib/rebasehelper/plugins/versioneers/cpan.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/versioneers
  copying build/lib/rebasehelper/plugins/versioneers/hackage.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/versioneers
  copying build/lib/rebasehelper/plugins/versioneers/npmjs.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/versioneers
  copying build/lib/rebasehelper/plugins/versioneers/pypi.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/versioneers
  copying build/lib/rebasehelper/plugins/versioneers/rubygems.py -> build/bdist.linux-x86_64/wheel/rebasehelper/plugins/versioneers
  running install_egg_info
  Copying rebasehelper.egg-info to build/bdist.linux-x86_64/wheel/rebasehelper-0.29.2.post1.dev2+gcb25188-py3.12.egg-info
  running install_scripts
  creating build/bdist.linux-x86_64/wheel/rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/WHEEL
  creating '/builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/.pyproject-builddir/pip-wheel-24cu7ayt/.tmp-qptyzpw_/rebasehelper-0.29.2.post1.dev2+gcb25188-py3-none-any.whl' and adding 'build/bdist.linux-x86_64/wheel' to it
  adding 'rebasehelper/__init__.py'
  adding 'rebasehelper/application.py'
  adding 'rebasehelper/archive.py'
  adding 'rebasehelper/argument_parser.py'
  adding 'rebasehelper/cli.py'
  adding 'rebasehelper/completion.py'
  adding 'rebasehelper/config.py'
  adding 'rebasehelper/constants.py'
  adding 'rebasehelper/exceptions.py'
  adding 'rebasehelper/logger.py'
  adding 'rebasehelper/options.py'
  adding 'rebasehelper/patcher.py'
  adding 'rebasehelper/results_store.py'
  adding 'rebasehelper/sample_config.py'
  adding 'rebasehelper/specfile.py'
  adding 'rebasehelper/temporary_environment.py'
  adding 'rebasehelper/types.py'
  adding 'rebasehelper/helpers/__init__.py'
  adding 'rebasehelper/helpers/bugzilla_helper.py'
  adding 'rebasehelper/helpers/console_helper.py'
  adding 'rebasehelper/helpers/copr_helper.py'
  adding 'rebasehelper/helpers/download_helper.py'
  adding 'rebasehelper/helpers/git_helper.py'
  adding 'rebasehelper/helpers/input_helper.py'
  adding 'rebasehelper/helpers/koji_helper.py'
  adding 'rebasehelper/helpers/lookaside_cache_helper.py'
  adding 'rebasehelper/helpers/path_helper.py'
  adding 'rebasehelper/helpers/process_helper.py'
  adding 'rebasehelper/helpers/rpm_helper.py'
  adding 'rebasehelper/plugins/__init__.py'
  adding 'rebasehelper/plugins/plugin.py'
  adding 'rebasehelper/plugins/plugin_collection.py'
  adding 'rebasehelper/plugins/plugin_loader.py'
  adding 'rebasehelper/plugins/plugin_manager.py'
  adding 'rebasehelper/plugins/build_log_hooks/__init__.py'
  adding 'rebasehelper/plugins/build_log_hooks/files.py'
  adding 'rebasehelper/plugins/build_tools/__init__.py'
  adding 'rebasehelper/plugins/build_tools/rpm/__init__.py'
  adding 'rebasehelper/plugins/build_tools/rpm/copr_.py'
  adding 'rebasehelper/plugins/build_tools/rpm/koji_.py'
  adding 'rebasehelper/plugins/build_tools/rpm/mock.py'
  adding 'rebasehelper/plugins/build_tools/rpm/rpmbuild.py'
  adding 'rebasehelper/plugins/build_tools/srpm/__init__.py'
  adding 'rebasehelper/plugins/build_tools/srpm/mock.py'
  adding 'rebasehelper/plugins/build_tools/srpm/rpmbuild.py'
  adding 'rebasehelper/plugins/checkers/__init__.py'
  adding 'rebasehelper/plugins/checkers/abipkgdiff.py'
  adding 'rebasehelper/plugins/checkers/csmock.py'
  adding 'rebasehelper/plugins/checkers/licensecheck.py'
  adding 'rebasehelper/plugins/checkers/pkgdiff.py'
  adding 'rebasehelper/plugins/checkers/rpmdiff.py'
  adding 'rebasehelper/plugins/checkers/rpminspect.py'
  adding 'rebasehelper/plugins/checkers/rpminspect_rpm.py'
  adding 'rebasehelper/plugins/checkers/rpminspect_srpm.py'
  adding 'rebasehelper/plugins/checkers/sonamecheck.py'
  adding 'rebasehelper/plugins/output_tools/__init__.py'
  adding 'rebasehelper/plugins/output_tools/json_.py'
  adding 'rebasehelper/plugins/output_tools/text.py'
  adding 'rebasehelper/plugins/spec_hooks/__init__.py'
  adding 'rebasehelper/plugins/spec_hooks/commit_hash_updater.py'
  adding 'rebasehelper/plugins/spec_hooks/escape_macros.py'
  adding 'rebasehelper/plugins/spec_hooks/paths_to_rpm_macros.py'
  adding 'rebasehelper/plugins/spec_hooks/pypi_url_fix.py'
  adding 'rebasehelper/plugins/spec_hooks/replace_old_version.py'
  adding 'rebasehelper/plugins/spec_hooks/ruby_helper.py'
  adding 'rebasehelper/plugins/spec_hooks/typo_fix.py'
  adding 'rebasehelper/plugins/versioneers/__init__.py'
  adding 'rebasehelper/plugins/versioneers/anitya.py'
  adding 'rebasehelper/plugins/versioneers/cpan.py'
  adding 'rebasehelper/plugins/versioneers/hackage.py'
  adding 'rebasehelper/plugins/versioneers/npmjs.py'
  adding 'rebasehelper/plugins/versioneers/pypi.py'
  adding 'rebasehelper/plugins/versioneers/rubygems.py'
  adding 'rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/LICENSE'
  adding 'rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/METADATA'
  adding 'rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/WHEEL'
  adding 'rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/entry_points.txt'
  adding 'rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/top_level.txt'
  adding 'rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/RECORD'
  removing build/bdist.linux-x86_64/wheel
  Building wheel for rebasehelper (pyproject.toml): finished with status 'done'
  Created wheel for rebasehelper: filename=rebasehelper-0.29.2.post1.dev2+gcb25188-py3-none-any.whl size=167566 sha256=51c41b6b9855ca3a7d9cc91adef4f4e35c816561808b2d5e95bf189d16808b3e
  Stored in directory: /builddir/.cache/pip/wheels/ad/e0/81/bbd072b5f0737a5c779b46097c78691654a27fe3475336b56a
Successfully built rebasehelper
++ pwd
+ make PYTHONPATH=/builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/build/lib SPHINXBUILD=sphinx-build-3 man
make -C docs man
make[1]: Entering directory '/builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/docs'
sphinx-build-3 -b custom-man -d build/doctrees   . build/man
Running Sphinx v7.2.6
making output directory... done
building [mo]: targets for 0 po files that are out of date
writing output... 
building [custom-man]: all manpages
updating environment: [new config] 42 added, 0 changed, 0 removed
reading sources... [100%] user_guide/writing_plugins
looking for now-outdated files... none found
pickling environment... /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/rebasehelper/plugins/checkers/__init__.py:docstring of rebasehelper.plugins.checkers.BaseChecker.CATEGORY:1: WARNING: duplicate object description of rebasehelper.plugins.checkers.BaseChecker.CATEGORY, other instance in api/plugins/checker, use :no-index: for one of them
/builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/rebasehelper/plugins/checkers/__init__.py:docstring of rebasehelper.plugins.checkers.BaseChecker.DEFAULT:1: WARNING: duplicate object description of rebasehelper.plugins.checkers.BaseChecker.DEFAULT, other instance in api/plugins/checker, use :no-index: for one of them
/builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/rebasehelper/plugins/checkers/__init__.py:docstring of rebasehelper.plugins.checkers.BaseChecker.results_dir:1: WARNING: duplicate object description of rebasehelper.plugins.checkers.BaseChecker.results_dir, other instance in api/plugins/checker, use :no-index: for one of them
/builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/rebasehelper/plugins/build_tools/rpm/__init__.py:docstring of rebasehelper.plugins.build_tools.rpm.BuildToolBase.ACCEPTS_OPTIONS:1: WARNING: duplicate object description of rebasehelper.plugins.build_tools.rpm.BuildToolBase.ACCEPTS_OPTIONS, other instance in api/plugins/rpmbuildtools, use :no-index: for one of them
/builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/rebasehelper/plugins/build_tools/rpm/__init__.py:docstring of rebasehelper.plugins.build_tools.rpm.BuildToolBase.CREATES_TASKS:1: WARNING: duplicate object description of rebasehelper.plugins.build_tools.rpm.BuildToolBase.CREATES_TASKS, other instance in api/plugins/rpmbuildtools, use :no-index: for one of them
/builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/rebasehelper/plugins/build_tools/rpm/__init__.py:docstring of rebasehelper.plugins.build_tools.rpm.BuildToolBase.DEFAULT:1: WARNING: duplicate object description of rebasehelper.plugins.build_tools.rpm.BuildToolBase.DEFAULT, other instance in api/plugins/rpmbuildtools, use :no-index: for one of them
/builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/rebasehelper/plugins/build_tools/srpm/__init__.py:docstring of rebasehelper.plugins.build_tools.srpm.SRPMBuildToolBase.DEFAULT:1: WARNING: duplicate object description of rebasehelper.plugins.build_tools.srpm.SRPMBuildToolBase.DEFAULT, other instance in api/plugins/srpmbuildtools, use :no-index: for one of them
done
checking consistency... done
writing... rebase-helper.1 { } done
build succeeded, 7 warnings.

The manual pages are in build/man.

Build finished. The manual pages are in build/man.
make[1]: Leaving directory '/builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/docs'
++ pwd
+ make PYTHON=/usr/bin/python3 PYTHONPATH=/builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188 completion
/usr/bin/python3 -m rebasehelper.completion rebase-helper.bash.in rebase-helper.bash
++ pwd
+ make PYTHON=/usr/bin/python3 PYTHONPATH=/builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188 sample_config
/usr/bin/python3 -m rebasehelper.sample_config rebase-helper.cfg
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.JATqqy
+ umask 022
+ cd /builddir/build/BUILD
+ '[' /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64 '!=' / ']'
+ rm -rf /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64
++ dirname /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64
+ mkdir -p /builddir/build/BUILDROOT
+ mkdir /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64
+ CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ export CFLAGS
+ CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ export CXXFLAGS
+ FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ export FFLAGS
+ FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ export FCFLAGS
+ VALAFLAGS=-g
+ export VALAFLAGS
+ RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Cforce-frame-pointers=yes -Clink-arg=-specs=/usr/lib/rpm/redhat/redhat-package-notes --cap-lints=warn'
+ export RUSTFLAGS
+ LDFLAGS='-Wl,-z,relro -Wl,--as-needed  -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes '
+ export LDFLAGS
+ LT_SYS_LIBRARY_PATH=/usr/lib64:
+ export LT_SYS_LIBRARY_PATH
+ CC=gcc
+ export CC
+ CXX=g++
+ export CXX
+ cd rebasehelper-0.29.2.post1.dev2+gcb25188
++ ls /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/pyproject-wheeldir/rebasehelper-0.29.2.post1.dev2+gcb25188-py3-none-any.whl
++ xargs basename --multiple
++ sed -E 's/([^-]+)-([^-]+)-.+\.whl/\1==\2/'
+ specifier=rebasehelper==0.29.2.post1.dev2+gcb25188
+ '[' -z rebasehelper==0.29.2.post1.dev2+gcb25188 ']'
+ TMPDIR=/builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/.pyproject-builddir
+ /usr/bin/python3 -m pip install --root /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64 --prefix /usr --no-deps --disable-pip-version-check --progress-bar off --verbose --ignore-installed --no-warn-script-location --no-index --no-cache-dir --find-links /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/pyproject-wheeldir rebasehelper==0.29.2.post1.dev2+gcb25188
Using pip 23.3.2 from /usr/lib/python3.12/site-packages/pip (python 3.12)
Looking in links: /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/pyproject-wheeldir
Processing ./pyproject-wheeldir/rebasehelper-0.29.2.post1.dev2+gcb25188-py3-none-any.whl
Installing collected packages: rebasehelper
  Creating /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64/usr/bin
  changing mode of /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64/usr/bin/rebase-helper to 755
Successfully installed rebasehelper-0.29.2.post1.dev2+gcb25188
+ '[' -d /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64/usr/bin ']'
+ '[' -z sP ']'
+ shebang_flags=-kasP
+ /usr/bin/python3 -B /usr/lib/rpm/redhat/pathfix.py -pni /usr/bin/python3 -kasP /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64/usr/bin/rebase-helper
/builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64/usr/bin/rebase-helper: updating
+ rm -rfv /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64/usr/bin/__pycache__
+ rm -f /builddir/build/BUILD/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64-pyproject-ghost-distinfo
+ site_dirs=()
+ '[' -d /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64/usr/lib/python3.12/site-packages ']'
+ site_dirs+=("/usr/lib/python3.12/site-packages")
+ '[' /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64/usr/lib64/python3.12/site-packages '!=' /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64/usr/lib/python3.12/site-packages ']'
+ '[' -d /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64/usr/lib64/python3.12/site-packages ']'
+ for site_dir in ${site_dirs[@]}
+ for distinfo in /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64$site_dir/*.dist-info
+ echo '%ghost /usr/lib/python3.12/site-packages/rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info'
+ sed -i s/pip/rpm/ /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64/usr/lib/python3.12/site-packages/rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/INSTALLER
+ PYTHONPATH=/usr/lib/rpm/redhat
+ /usr/bin/python3 -B /usr/lib/rpm/redhat/pyproject_preprocess_record.py --buildroot /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64 --record /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64/usr/lib/python3.12/site-packages/rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/RECORD --output /builddir/build/BUILD/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64-pyproject-record
+ rm -fv /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64/usr/lib/python3.12/site-packages/rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/RECORD
removed '/builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64/usr/lib/python3.12/site-packages/rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/RECORD'
+ rm -fv /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64/usr/lib/python3.12/site-packages/rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/REQUESTED
removed '/builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64/usr/lib/python3.12/site-packages/rebasehelper-0.29.2.post1.dev2+gcb25188.dist-info/REQUESTED'
++ wc -l /builddir/build/BUILD/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64-pyproject-ghost-distinfo
++ cut -f1 '-d '
+ lines=1
+ '[' 1 -ne 1 ']'
+ RPM_FILES_ESCAPE=4.19
+ /usr/bin/python3 /usr/lib/rpm/redhat/pyproject_save_files.py --output-files /builddir/build/BUILD/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64-pyproject-files --output-modules /builddir/build/BUILD/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64-pyproject-modules --buildroot /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64 --sitelib /usr/lib/python3.12/site-packages --sitearch /usr/lib64/python3.12/site-packages --python-version 3.12 --pyproject-record /builddir/build/BUILD/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64-pyproject-record --prefix /usr rebasehelper
+ mkdir -p /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64/usr/share/man/man1/
+ install -p -m 0644 docs/build/man/rebase-helper.1 /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64/usr/share/man/man1
+ mkdir -p /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64/usr/share/bash-completion/completions/
+ install -p -m 0644 rebase-helper.bash /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64/usr/share/bash-completion/completions/rebase-helper
+ /usr/bin/find-debuginfo -j2 --strict-build-id -m -i --build-id-seed 0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40 --unique-debug-suffix -0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64 --unique-debug-src-base rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000 -S debugsourcefiles.list /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188
find-debuginfo: starting
Extracting debug info from 0 files
Creating .debug symlinks for symlinks to ELF files
find: ‘debug’: No such file or directory
find-debuginfo: done
+ /usr/lib/rpm/check-buildroot
+ /usr/lib/rpm/redhat/brp-ldconfig
+ /usr/lib/rpm/brp-compress
+ /usr/lib/rpm/redhat/brp-strip-lto /usr/bin/strip
+ /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip
+ /usr/lib/rpm/check-rpaths
+ /usr/lib/rpm/redhat/brp-mangle-shebangs
+ /usr/lib/rpm/brp-remove-la-files
+ env /usr/lib/rpm/redhat/brp-python-bytecompile '' 1 0 -j2
Bytecompiling .py files below /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64/usr/lib/python3.12 using python3.12
+ /usr/lib/rpm/redhat/brp-python-hardlink
Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.BCkrrM
+ umask 022
+ cd /builddir/build/BUILD
+ CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ export CFLAGS
+ CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ export CXXFLAGS
+ FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ export FFLAGS
+ FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ export FCFLAGS
+ VALAFLAGS=-g
+ export VALAFLAGS
+ RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Cforce-frame-pointers=yes -Clink-arg=-specs=/usr/lib/rpm/redhat/redhat-package-notes --cap-lints=warn'
+ export RUSTFLAGS
+ LDFLAGS='-Wl,-z,relro -Wl,--as-needed  -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes '
+ export LDFLAGS
+ LT_SYS_LIBRARY_PATH=/usr/lib64:
+ export LT_SYS_LIBRARY_PATH
+ CC=gcc
+ export CC
+ CXX=g++
+ export CXX
+ cd rebasehelper-0.29.2.post1.dev2+gcb25188
+ CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ LDFLAGS='-Wl,-z,relro -Wl,--as-needed  -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes '
+ PATH=/builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64/usr/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/sbin
+ PYTHONPATH=/builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64/usr/lib64/python3.12/site-packages:/builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64/usr/lib/python3.12/site-packages
+ PYTHONDONTWRITEBYTECODE=1
+ PYTEST_ADDOPTS=' --ignore=/builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/.pyproject-builddir'
+ PYTEST_XDIST_AUTO_NUM_WORKERS=2
+ /usr/bin/pytest
============================= test session starts ==============================
platform linux -- Python 3.12.8, pytest-7.4.3, pluggy-1.3.0
rootdir: /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188
configfile: tox.ini
testpaths: tests
collected 138 items / 32 deselected / 106 selected

tests/test_application.py ...                                            [  2%]
tests/test_archive.py ..........                                         [ 12%]
tests/test_cli.py .                                                      [ 13%]
tests/test_config.py ...                                                 [ 16%]
tests/test_patcher.py ...                                                [ 18%]
tests/test_results_store.py ....                                         [ 22%]
tests/test_specfile.py ......................                            [ 43%]
tests/test_temporary_environment.py ....                                 [ 47%]
tests/helpers/test_console_helper.py ........                            [ 54%]
tests/helpers/test_download_helper.py ....                               [ 58%]
tests/helpers/test_git_helper.py ....                                    [ 62%]
tests/helpers/test_input_helper.py .......                               [ 68%]
tests/helpers/test_path_helper.py ........                               [ 76%]
tests/helpers/test_process_helper.py ...........                         [ 86%]
tests/helpers/test_rpm_helper.py ....                                    [ 90%]
tests/plugins/test_checkers.py ..                                        [ 92%]
tests/plugins/test_output_tools.py ..                                    [ 94%]
tests/plugins/test_spec_hooks.py ......                                  [100%]

=============================== warnings summary ===============================
rebasehelper/__init__.py:28
  /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/rebasehelper/__init__.py:28: DeprecationWarning: pkg_resources is deprecated as an API. See https://setuptools.pypa.io/en/latest/pkg_resources.html
    import pkg_resources

tests/test_application.py::TestApplication::test_application_sources
tests/test_application.py::TestApplication::test_application_sources
tests/test_application.py::TestApplication::test_application_sources
tests/test_application.py::TestApplication::test_application_sources
tests/test_archive.py::TestArchive::test_archive[tar.xz]
  /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/rebasehelper/archive.py:92: DeprecationWarning: Python 3.14 will, by default, filter extracted tar archives and reject files or modify their metadata. Use the filter argument to control this behavior.
    archive.extractall(path)

tests/test_archive.py::TestArchive::test_archive[tar.gz]
tests/test_archive.py::TestArchive::test_archive[tgz]
tests/test_archive.py::TestArchive::test_archive[crate]
tests/test_archive.py::TestArchive::test_archive[gem]
tests/test_archive.py::TestArchive::test_archive[gem]
  /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/rebasehelper/archive.py:133: DeprecationWarning: Python 3.14 will, by default, filter extracted tar archives and reject files or modify their metadata. Use the filter argument to control this behavior.
    archive.extractall(path)

tests/test_archive.py::TestArchive::test_archive[tar.bz2]
  /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/rebasehelper/archive.py:109: DeprecationWarning: Python 3.14 will, by default, filter extracted tar archives and reject files or modify their metadata. Use the filter argument to control this behavior.
    archive.extractall(path)

-- Docs: https://docs.pytest.org/en/stable/how-to/capture-warnings.html
=============== 106 passed, 32 deselected, 12 warnings in 25.07s ===============
+ RPM_EC=0
++ jobs -p
+ exit 0
Processing files: rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.noarch
Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.q01V3q
+ umask 022
+ cd /builddir/build/BUILD
+ cd rebasehelper-0.29.2.post1.dev2+gcb25188
+ DOCDIR=/builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64/usr/share/doc/rebase-helper
+ export LC_ALL=
+ LC_ALL=
+ export DOCDIR
+ /usr/bin/mkdir -p /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64/usr/share/doc/rebase-helper
+ cp -pr /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/README.md /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64/usr/share/doc/rebase-helper
+ cp -pr /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/CHANGELOG.md /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64/usr/share/doc/rebase-helper
+ cp -pr /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188/rebase-helper.cfg /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64/usr/share/doc/rebase-helper
+ RPM_EC=0
++ jobs -p
+ exit 0
Provides: python3.12dist(rebasehelper) = 0.29.2~~dev2 python3dist(rebasehelper) = 0.29.2~~dev2 rebase-helper = 0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: /usr/bin/python3 python(abi) = 3.12 python3.12dist(ansicolors) python3.12dist(copr) python3.12dist(gitpython) python3.12dist(pyquery) python3.12dist(python-pam) python3.12dist(requests) python3.12dist(rpkg) python3.12dist(specfile) python3.12dist(unidiff)
Recommends: libabigail licensecheck pkgdiff >= 1.6.3 rpminspect-data-fedora rpmlint
Checking for unpackaged file(s): /usr/lib/rpm/check-files /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64
Wrote: /builddir/build/SRPMS/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.src.rpm
Wrote: /builddir/build/RPMS/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.noarch.rpm
Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.Qb7k9D
+ umask 022
+ cd /builddir/build/BUILD
+ cd rebasehelper-0.29.2.post1.dev2+gcb25188
+ /usr/bin/rm -rf /builddir/build/BUILDROOT/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.x86_64
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(rmbuild): /bin/sh -e /var/tmp/rpm-tmp.kpMGFC
+ umask 022
+ cd /builddir/build/BUILD
+ rm -rf /builddir/build/BUILD/rebasehelper-0.29.2.post1.dev2+gcb25188-SPECPARTS
+ rm -rf rebasehelper-0.29.2.post1.dev2+gcb25188 rebasehelper-0.29.2.post1.dev2+gcb25188.gemspec
+ RPM_EC=0
++ jobs -p
+ exit 0
Finish: rpmbuild rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.src.rpm
Finish: build phase for rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.src.rpm
INFO: chroot_scan: 1 files copied to /var/lib/copr-rpmbuild/results/chroot_scan
INFO: /var/lib/mock/fedora-40-x86_64-1738226926.124416/root/var/log/dnf5.log
INFO: chroot_scan: creating tarball /var/lib/copr-rpmbuild/results/chroot_scan.tar.gz
/bin/tar: Removing leading `/' from member names
INFO: Done(/var/lib/copr-rpmbuild/results/rebase-helper-0.29.2.post1.dev2+gcb25188-1.20250130084348086277.pr932.2.gcb25188.fc40.src.rpm) Config(child) 1 minutes 33 seconds
INFO: Results and/or logs in: /var/lib/copr-rpmbuild/results
INFO: Cleaning up build root ('cleanup_on_success=True')
Start: clean chroot
INFO: unmounting tmpfs.
Finish: clean chroot
Finish: run
Running RPMResults tool
Package info:
{
    "packages": [
        {
            "name": "rebase-helper",
            "epoch": null,
            "version": "0.29.2.post1.dev2+gcb25188",
            "release": "1.20250130084348086277.pr932.2.gcb25188.fc40",
            "arch": "noarch"
        },
        {
            "name": "rebase-helper",
            "epoch": null,
            "version": "0.29.2.post1.dev2+gcb25188",
            "release": "1.20250130084348086277.pr932.2.gcb25188.fc40",
            "arch": "src"
        }
    ]
}
RPMResults finished