%define rpmrelease %{nil} %define debug_package %{nil} ### Work-around the fact that openSUSE/SLES _always_ defined both :-/ %if 0%{?sles_version} == 0 %undefine sles_version %endif Summary: Relax-and-Recover is a Linux disaster recovery and system migration tool Name: rear Version: snapshot Release: 1.20241218161837849854.pr3370.4.g5813a054%{?dist} # Since some time the license value 'GPLv3' causes build failures in the openSUSE Build Service # cf. https://github.com/rear/rear/issues/2289#issuecomment-559713101 # so we use now 'GPL-3.0' that is known to work (at least for now) according to # https://github.com/rear/rear/issues/2289#issuecomment-576625186 License: GPL-3.0 Group: Applications/File URL: http://relax-and-recover.org/ Source: rear-snapshot.tar.gz # BuildRoot: is required for SLES 11 and RHEL/CentOS 5 builds on openSUSE Build Service (#2135) BuildRoot: %(mktemp -ud %{_tmppath}/%{name}-%{version}-%{release}-XXXXXX) # rear contains only bash scripts plus documentation so that on first glance it could be "BuildArch: noarch" # but actually it is not "noarch" because it only works on those architectures that are explicitly supported. # Of course the rear bash scripts can be installed on any architecture just as any binaries can be installed on any architecture. # But the meaning of architecture dependent packages should be on what architectures they will work. # Therefore only those architectures that are actually supported are explicitly listed. # This avoids that rear can be "just installed" on architectures that are actually not supported (e.g. ARM): ExclusiveArch: %ix86 x86_64 ppc ppc64 ppc64le ia64 s390x # Furthermore for some architectures it requires architecture dependent packages (like syslinux for x86 and x86_64) # so that rear must be architecture dependent because ifarch conditions never match in case of "BuildArch: noarch" # see the GitHub issue https://github.com/rear/rear/issues/629 %ifarch %ix86 x86_64 Requires: syslinux %endif # In the end this should tell the user that rear is known to work only on ix86 x86_64 ppc ppc64 ppc64le ia64 # and on ix86 x86_64 syslinux is explicitly required to make the bootable ISO image # (in addition to the default installed bootloader grub2) while on ppc ppc64 the # default installed bootloader yaboot is also used to make the bootable ISO image. BuildRequires: make ### Mandatory dependencies on all distributions: Requires: binutils Requires: ethtool Requires: gzip Requires: iputils Requires: parted Requires: tar Requires: openssl Requires: gawk Requires: attr Requires: bc ### Non-mandatory dependencies should be specified as RPM weak dependency via ### Recommends: RPM_package_name ### because missing RPM Recommends do not cause hard errors during installation ### and using Recommends instead of Requires has the additional advantage ### that the user can use ReaR without unneeded hard requirements when ### he does not use functionality in ReaR that uses the hard requirements ### e.g. when he does not need genisoimage or mkisofs to make an ISO image ### (i.e. when he does not use "OUTPUT=ISO"), cf. ### https://github.com/rear/rear/issues/2289 ### When particular functionality in ReaR requires certain programs ### those programs need to be specified in the ReaR scripts in the ### REQUIRED_PROGS config array but not here in the RPM spec file. ### If you require NFS, you may need the below packages #Requires: nfsclient portmap rpcbind ### We drop LSB requirements because it pulls in too many dependencies ### The OS is hardcoded in /etc/rear/os.conf instead #Requires: redhat-lsb ### Required for Bacula/MySQL support #Requires: bacula-mysql ### Required for OBDR #Requires: lsscsi sg3_utils ### Optional requirement #Requires: cfg2html %if %{?suse_version:1}0 Requires: iproute2 ### Since SLES11 there is an extra nfs-client package: Recommends: nfs-client ### In SLES11 and SLES12 there is ### /usr/bin/genisoimage provided by the genisoimage RPM and there is ### /usr/bin/mkisofs provided by the cdrkit-cdrtools-compat RPM and ### both RPMs are installed by default. ### In openSUSE Leap 15.0 and SLES15 there is (at least by default) ### no longer /usr/bin/genisoimage but there is ### only /usr/bin/mkisofs provided by the mkisofs RPM ### so we recommend all of them to get any of them if available: Recommends: cdrkit-cdrtools-compat Recommends: genisoimage Recommends: mkisofs %endif %if %{?mandriva_version:1}0 Requires: iproute2 ### Mandriva switched from 2008 away from mkisofs, ### and as a specialty call the package cdrkit-genisoimage! %if 0%{?mandriva_version} >= 2008 Requires: cdrkit-genisoimage %else Requires: mkisofs %endif #Requires: lsb %endif ### On RHEL/Fedora the genisoimage packages provides mkisofs %if %{?centos_version:1}%{?fedora:1}%{?rhel_version:1}0 Requires: iproute #Requires: mkisofs Requires: genisoimage #Requires: redhat-lsb %endif # Note that CentOS also has rhel defined so there is no need to use centos %if 0%{?rhel} Requires: util-linux %endif %description Relax-and-Recover is the leading Open Source disaster recovery and system migration solution. It comprises of a modular frame-work and ready-to-go workflows for many common situations to produce a bootable image and restore from backup using this image. As a benefit, it allows to restore to different hardware and can therefore be used as a migration tool as well. Currently Relax-and-Recover supports various boot media (incl. ISO, PXE, OBDR tape, USB or eSATA storage), a variety of network protocols (incl. sftp, ftp, http, nfs, cifs) as well as a multitude of backup strategies (incl. IBM TSM, MircroFocus Data Protector, Symantec NetBackup, EMC NetWorker, Bacula, Bareos, BORG, Duplicity, rsync). Relax-and-Recover was designed to be easy to set up, requires no maintenance and is there to assist when disaster strikes. Its setup-and-forget nature removes any excuse for not having a disaster recovery solution implemented. Professional services and support are available. %pre if [ $1 -gt 1 ] ; then # during upgrade remove obsolete directories %{__rm} -rf %{_datadir}/rear/output/NETFS fi %prep %setup -q -n rear-snapshot %build %install %{__rm} -rf %{buildroot} %{__make} install DESTDIR="%{buildroot}" %check %{__make} validate %files # defattr: is required for SLES 11 and RHEL/CentOS 5 builds on openSUSE Build Service (#2135) %defattr(-, root, root, 0755) %doc MAINTAINERS COPYING README.md doc/*.txt %doc %{_mandir}/man8/rear.8* %config(noreplace) %{_sysconfdir}/rear/ %config(noreplace) %{_sysconfdir}/rear/cert/ %{_datadir}/rear/ %{_localstatedir}/lib/rear/ %{_sbindir}/rear %changelog * Wed Dec 18 2024 Packit - snapshot-1.20241218161837849854.pr3370.4.g5813a054 - Update packaging/debian/changelog (Johannes Meixner) - rear.spec : set Version (Johannes Meixner) - sbin/rear : set VERSION and RELEASE_DATE (Johannes Meixner) - See https://github.com/rear/rear/wiki/Release-process#preparation (Johannes Meixner) * Thu Jul 30 2015 Johannes Meixner - For a changelog see the rear-release-notes.txt file.