User documentation for using Janet bases
The files JBDatastructure.H
, JBSets.H
, JBAlgorithm.H
and JBMill.H
introduce several classes for computing and working with Janet basis.
The normal user should only use the classes Involutive::JBMill
and Involutive::JBMill::Builder
to interact with Janet bases.
Computing a Janet basis
To compute a Janet basis the user should use the class Involutive::JBMill::Builder
. To construct a Involutive::JBMill::Builder
object the user has to use the standard constructor. For configuration of the building process there are several methods:
setInput(v)
--v
must be avector<RingElem>
. It sets the generating set of the ideal tov
.setInput(cBegin, cEnd)
--cBegin
andcEnd
must be avector<RingElem>::const_iterator
and must define a range ofRingElem
. The method sets the generating set of the ideal to this range.setStrategy(strat)
--strat
must be aInvolutive::StrategyFlag
. Possible enums areTQDegree
,TQBlockHigh
,TQBlockLow
andGBCompletion
. It defines the algorithm which should be used to compute a Janet basis. If this method is never called the Builder object uses theTQBlockLow
strategy.setInvolutiveCriteria(crits)
--crits
must be abitset<3>
. Every bit represents one of the three involutive criteria. If this method is never called the Builder object uses the first two involutive criteria. The methods are chainable, e.g. the user can do the following:builder.setInput(input).setStrategy(Involutive::TQDegree)
. If the user calls a method more than one time only the input of the last method call is taken into account. To construct aJBMill
out of a correctly configured builder objectbuild
the user has to useJBMill(build)
. If the user does not set a input the construction of aJBMill
will fail.
Using the JBMill
In the following let elem
be a RingElem
.
myReturnJB()
-- returns the minimal Janet basis asvector<RingElem>
myReturnGB()
-- returns the minimal Groebner basis asvector<RingElem>
myPrintMultVar()
-- prints the multiplicative variables of every element in the given Janet basismyPrintNonMultVar()
-- prints the nonmultiplicative variables of every element in the given Janet basismyMultVars()
-- compute the multiplicative variables of the given Janet basis. It returns amap<PPMonoidElem, vector<bool> >
where the key is aLPP
of an element in the Janet basis.myNonMultVars()
-- compute the nonmultiplicative variables of the given Janet basis. It returns amap<PPMonoidElem, vector<bool> >
where the key is aLPP
of an element in the Janet basis.myNonMultVarsOf(elem)
-- computes the nonmultiplicative variables ofelem
which must be a member of the Janet basis. If not we assume that every variable is nonmultiplicative. It returns avector<bool>
.IamPommaretBasis
-- checks if the Janet basis is also a Pommaret basis. It returns a boolean.IamHomogenous
-- checks if the Janet basis is also homogeneous. It returns a boolean.IamMonomialIdeal
-- checks if the Janet basis is also a monomial ideal. It returns a boolean.myStandardRepresentation(elem)
-- compute the involutive standard representation ofelem
. It returnspair<map<PPMonoidElem, RingElem>, RingElem>
. The first entry of the pair is a map, where the key represents the LPP of an element in the Janet basis and the value the corresponding factor. The second entry of the pair corresponds to the rest.myOutputStandardRepresentation(elem)
-- computes an involutive standard representation ofelem
.myHilbertPol(elem)
--elem
must be a single indent. The method computes the Hilbert polynomial of the ideal in terms ofelem
.myHilbertFunc(n)
--n
must be aBigInt
. The method computes the dimension of P/I in degreen
.myHilbertSeries(elem)
--elem
must be a single indent of a fraction field. The method computes the Hilbert series of the ideal in terms ofelem
.mySyzygy()
-- Compute the first involutive syzygy and returns aFGModule
.myDim()
-- Computes the dimension of P/I.myCls(ppelem)
-- Computes the class ofppelem
which is of typePPMonoidElem
. the class starts counting at0
up ton - 1
. The cls of1
is-1
. It returns along
.myMinCls()
-- Computes the minimal class of all LPP's of the Janet basis as long.myMaxCls()
-- Computes the maximal class of all LPP's of the Janet basis as long.myElementsWithClass(InputCls)
-- Computes all elements of the Janet basis where the class of the LPP isInputCls
.InputCls
is along
and the method returns avector<RingElem>
.myComplementaryDecomposition()
-- Computes the complementary decomposition of I. it returnsvector<pair<PPMonoidElem, vector<bool> > >
.myStandardPairs()
-- Computes the standard pairs of I. it returnsvector<pair<PPMonoidElem, vector<bool> > >
.myJNormalForm(elem)
-- Computes the involutive normal form ofelem
and returns aRingElem
.myJDivisor(elem)
-- Computes the involutive divisor ofLPP(elem)
. If there is an involutive divisor it returns it asRingElem
if not the method returns0
.
Examples
Maintainer documentation for JBDatastructure, JBSets, JBAlgorithm, JBMill
The basic datastructures to deal with Janet basis are implemented in JBDatastructure.C
. Everything of the following lives in the namespace CoCoA::Involutive
.
JanetDatastructure
JanetTriple
The JanetTriple
is nothing else than a polynomial with some extra informations.
In addition to the polynomial myPolynom
it has a data member myAncestor
which is usually the LPP of myPolynom
and the already prolonged variables (myAlreadyProlongedVars
). If the JanetTriple
arises from a prolongation x_i * myP^\prime
the ancestor is the LPP of myP^\prime
.
JanetNodeBase, JanetLeafNodeImpl, JanetInternalNodeImpl, JanetHandle, JanetTree
The JanetTree
is the basic data structure to compute and deal efficiently with a Janet basis.
It is a binary tree. A Janet tree contains the Janet basis in its leaf nodes.
Therefore we distinguish between internal nodes (JanetInternalNodes
) and leaf nodes (JanetLeafNodes
).
The tree is designed as a nested set of lists.
A node basically consists of the distance to the next variable (the distance to next node to the right) and the next degree (the distance to next node to the left).
An internal node contains a list of JanetHandles
additionally, which represents the following tree to the right.
A leaf node contains, beside the distance information, a JanetTriple
.
The JanetTriple
is not a direct data member of a leaf node.
It is stored in a list.
JanetLeafNodeImpl
only gets an iterator from this list.
The JanetHandle
handles the distinction between the JanetLeafNodeImpl
and the JanetInternalNodeImpl
because a stl-container cannot reasonable handle different classes even if they have the same base class.
Problems&Ideals related to JanetNodeBase, JanetLeafNodeImpl, JanetInternalNodeImpl, JanetHandle, JanetTree
The JanetTree
only works with a list of JanetTriple
's. It would be useful if it would work with a list of polynomials as well.
JanetContainer
The last part of the previous paragraph shows a strong connection between the list of JanetTriple
which shall represents the Janet basis and the JanetTree
which is another representation of the Janet basis.
This could lead to strange situations which has as a consequence invalidate iterators.
To avoid this during the normal usage of these two datastructure we introduce a JanetContainer
.
JanetContainer
couples these two datastructures.
It contains a list of JanetTriple
's and a JanetTree
which leaf nodes consists of iterators to this list.
With this coupling the user can deal with a Janet basis safely.
But for computing a Janet basis we do not use this class for efficiency reasons.
JanetIterator
The task of JanetIterator
is to offer a way to navigate through the JanetTree
.
Basically the JanetIterator
consists of a pointer to the specific JanetTree
, pointer to the current in the tree and an iterator to a specific position in this list.
The JanetIterator
provides access (if possible) to the underlying JanetTriple
, provides the possibility to move forward in the tree, provides some informations of the current position in the tree and provides the functionality to add a new node in the JanetTree
behind the current position.
For knowing the way from the beginning of the tree to the current position it consists of a vector of longs which stores the specific degrees and the current variable.
JBSets
The most important algorithm to compute Janet basis is the TQ-Algorithm.
There are two variants of it: the basic TQDegree strategy and the more advanced TQBlock strategy.
The TQDegree strategy deals with a set T and Q. In short, through the computation the algorithm moves elements mainly from Q to T and vica versa. To deal efficiently with it we introduced the class TQSets
. It consists of the sets T (mySetT
) and Q (mySetQ
) which are ordered. Both are represented as std::multiset
.
They contain JanetTriple
and ordered by the LPP's of them (Because these LPP's are not unique during the computation we choosing std::multiset
).
The JanetTriple
's are not contained directly in the set T and Q itself, as it is very expensive to move them from one set to the other.
Therefore there is a third set (myBasicSet
) which is implemented as list of JanetTriple
's which contains the JanetTriple
's itself.
The sets T and Q only contain an iterator to a specific position of these sets.
For applying the BlockTQ algorithm we need a third set P (mySetP
) which is implemented like T and Q. Due to the similarity we introduced a subclass of TQSets
which is called TQPSets
. In addition to the new set P it introduces a strategy flag which influences the way how we move elements from Q to P.
In addition to the above mentioned sets TQSets
consists of a SparsePolyRing
, a ReductionCog
and a bitset<3>
(myCriteria
). myCriteria
regulates which involutive criteria shall be applied during the computation. Every bit stands for one single involutive criteria.
Problems&Ideas related to JBSets
Again the construction of the sets T,Q and myBasicSet
is dangerous. There could be invalid iterators in the set T and Q.
In addition to that it can happen (it really happens!!!!) that we can modify an element in myBasicSet
in such a way that the ordering in T or Q would be change.
But T and Q does not realizing this change.
Therefore we getting again an invalid state.
A solution for the second problem could be to store T and Q simply as a list of iterators of JanetTriple
's and sort the list manually every time we want to have a sorted list. Maybe this solution is even faster than the current one!
JBAlgorithm
JBAlgorithm
This class provides an interface for computing Janet bases.
It defines a method to compute a Janet basis for a given input, and a method to get a JanetContainer which should contain the computed Janet basis.
Also it contains as basic data the polynomial ring and the PPMonoid
.
Every class which computes a Janet basis has to be a subclass of this class.
TQAlgorithm
This class is a subclass of JBAlgorithm
but is again purely virtual.
It acts as an interface for all algorithms which using the TQ strategy.
In addition to the data members of the base class it defines amongst other things a JanetTree
(myJTree
).
All TQAlgorithm
subclasses deal with the class TQSets
or a subclass of it.
To get a unique access to the specific data member (which is defined in the subclasses) we implemented a purely virtual function myGetSets
which returns a reference to the specific data members.
With this construction we are able to initialize the specific set in the class TQAlgorithm
via the method myInitialization
.
In addition to that TQAlgorithm
contains a method to return the ideal which is generated by 1
.
DegreeTQ
This class is a subclass of TQAlgorithm
. It defines the data member mySets
(a TQSets
instance) additionally. In addition to that it implements the purely virtual methods myGetSets
and myComputer
.
BlockTQ
This class is a subclass of TQAlgorithm
. It defines the data member mySets
(a TQPSets
instance) additionally. In addition to that it implements the purely virtual methods myGetSets
and myComputer
.
CompletionGB
This class defines another approach to compute Janet basis, than the TQ approach.
Here we first compute a reduced Groebner basis and complete it to the minimal Janet basis. It is a subclass of JBAlgorithm
. The class implements the purely virtual methods myComputer
and myOutputResult
and defines a JanetTree
and a list of JanetTriple
's as data members. In addition to that it implements several methods to compute the completion.
JBMill
JBMill
This class defines the representation of a Janet basis accessible by the user.
As data members it contains a JanetContainer
(myBasis
), a SparsePolyRing
(myPolyRing
) and a PPMonoid
(myPPMValue
).
The class defines several methods to work with the Janet basis. For example the user can compute the multiplicative variables, the Groebner basis or some invariants like the hilbert polynomial.
In addition to that it acts as a base class for the PBMill
, which is the representation of a Pommaret basis.
Problems&Ideas related to JBMill
Maybe introduce typedefs or structs for complicated objects like a complementary decomposition. Add several methods to check different stability position.
JBMill::Builder
This class is designed to construct a Janet basis.
The goal of this class is to separate the construction of the JBMill
from its representation.
The 'Gang of Four' (Gamma, Helm, Johnson, Vlissides - Design Patterns) served
as template for the construction.
The corresponding pattern is called Building Pattern.
To construct a JBMill
out of the builder object the user can call a constructor of JBMill
with a configured builder object.