Mock Version: 4.1 ENTER ['do_with_status'](['bash', '--login', '-c', '/usr/bin/rpmbuild -bs --target x86_64 --nodeps /builddir/build/SPECS/rubygem-rubyntlm.spec'], chrootPath='/var/lib/mock/rhel-8-x86_64-1687645874.588732/root'env={'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PROMPT_COMMAND': 'printf "\\033]0;\\007"', 'PS1': ' \\s-\\v\\$ ', 'LANG': 'C.UTF-8'}shell=Falselogger=timeout=0uid=1000gid=135user='mockbuild'nspawn_args=['--capability=cap_ipc_lock', '--rlimit=RLIMIT_NOFILE=10240', '--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.6sucgs0j:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/mapper/control', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11']unshare_net=TrueprintOutput=True) Using nspawn with args ['--capability=cap_ipc_lock', '--rlimit=RLIMIT_NOFILE=10240', '--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.6sucgs0j:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/mapper/control', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11'] Executing command: ['/usr/bin/systemd-nspawn', '-q', '-M', '1523f5da886e495790b4543bc4fc3fc5', '-D', '/var/lib/mock/rhel-8-x86_64-1687645874.588732/root', '-a', '-u', 'mockbuild', '--capability=cap_ipc_lock', '--rlimit=RLIMIT_NOFILE=10240', '--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.6sucgs0j:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/mapper/control', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11', '--console=pipe', '--setenv=TERM=vt100', '--setenv=SHELL=/bin/bash', '--setenv=HOME=/builddir', '--setenv=HOSTNAME=mock', '--setenv=PATH=/usr/bin:/bin:/usr/sbin:/sbin', '--setenv=PROMPT_COMMAND=printf "\\033]0;\\007"', '--setenv=PS1= \\s-\\v\\$ ', '--setenv=LANG=C.UTF-8', '--resolv-conf=off', 'bash', '--login', '-c', '/usr/bin/rpmbuild -bs --target x86_64 --nodeps /builddir/build/SPECS/rubygem-rubyntlm.spec'] with env {'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PROMPT_COMMAND': 'printf "\\033]0;\\007"', 'PS1': ' \\s-\\v\\$ ', 'LANG': 'C.UTF-8', 'SYSTEMD_NSPAWN_TMPFS_TMP': '0', 'SYSTEMD_SECCOMP': '0'} and shell False Building target platforms: x86_64 Building for target x86_64 Wrote: /builddir/build/SRPMS/rubygem-rubyntlm-0.6.2-1.el8.src.rpm Child return code was: 0 ENTER ['do_with_status'](['bash', '--login', '-c', '/usr/bin/rpmbuild -bb --target x86_64 --nodeps /builddir/build/SPECS/rubygem-rubyntlm.spec'], chrootPath='/var/lib/mock/rhel-8-x86_64-1687645874.588732/root'env={'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PROMPT_COMMAND': 'printf "\\033]0;\\007"', 'PS1': ' \\s-\\v\\$ ', 'LANG': 'C.UTF-8'}shell=Falselogger=timeout=0uid=1000gid=135user='mockbuild'nspawn_args=['--capability=cap_ipc_lock', '--rlimit=RLIMIT_NOFILE=10240', '--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.6sucgs0j:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/mapper/control', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11']unshare_net=TrueprintOutput=True) Using nspawn with args ['--capability=cap_ipc_lock', '--rlimit=RLIMIT_NOFILE=10240', '--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.6sucgs0j:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/mapper/control', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11'] Executing command: ['/usr/bin/systemd-nspawn', '-q', '-M', '417fc9df5fe24d5ea8bb77904fdc1f9f', '-D', '/var/lib/mock/rhel-8-x86_64-1687645874.588732/root', '-a', '-u', 'mockbuild', '--capability=cap_ipc_lock', '--rlimit=RLIMIT_NOFILE=10240', '--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.6sucgs0j:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/mapper/control', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11', '--console=pipe', '--setenv=TERM=vt100', '--setenv=SHELL=/bin/bash', '--setenv=HOME=/builddir', '--setenv=HOSTNAME=mock', '--setenv=PATH=/usr/bin:/bin:/usr/sbin:/sbin', '--setenv=PROMPT_COMMAND=printf "\\033]0;\\007"', '--setenv=PS1= \\s-\\v\\$ ', '--setenv=LANG=C.UTF-8', '--resolv-conf=off', 'bash', '--login', '-c', '/usr/bin/rpmbuild -bb --target x86_64 --nodeps /builddir/build/SPECS/rubygem-rubyntlm.spec'] with env {'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PROMPT_COMMAND': 'printf "\\033]0;\\007"', 'PS1': ' \\s-\\v\\$ ', 'LANG': 'C.UTF-8', 'SYSTEMD_NSPAWN_TMPFS_TMP': '0', 'SYSTEMD_SECCOMP': '0'} and shell False Building target platforms: x86_64 Building for target x86_64 Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.BWBIaa + umask 022 + cd /builddir/build/BUILD + cd /builddir/build/BUILD + rm -rf rubyntlm-0.6.2 + /usr/bin/gem unpack /builddir/build/SOURCES/rubyntlm-0.6.2.gem Unpacked gem: '/builddir/build/BUILD/rubyntlm-0.6.2' + /usr/bin/gem spec /builddir/build/SOURCES/rubyntlm-0.6.2.gem --ruby + STATUS=0 + '[' 0 -ne 0 ']' + cd rubyntlm-0.6.2 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.aFgSGj + umask 022 + cd /builddir/build/BUILD + cd rubyntlm-0.6.2 + gem build ../rubyntlm-0.6.2.gemspec WARNING: open-ended dependency on pry (>= 0, development) is not recommended if pry is semantically versioned, use: add_development_dependency 'pry', '~> 0' WARNING: open-ended dependency on rake (>= 0, development) is not recommended if rake is semantically versioned, use: add_development_dependency 'rake', '~> 0' WARNING: open-ended dependency on rspec (>= 2.11, development) is not recommended if rspec is semantically versioned, use: add_development_dependency 'rspec', '~> 2.11' WARNING: open-ended dependency on simplecov (>= 0, development) is not recommended if simplecov is semantically versioned, use: add_development_dependency 'simplecov', '~> 0' WARNING: See http://guides.rubygems.org/specification-reference/ for help Successfully built RubyGem Name: rubyntlm Version: 0.6.2 File: rubyntlm-0.6.2.gem + mkdir -p ./usr/share/gems + CONFIGURE_ARGS='--with-cflags='\''-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection'\'' ' + gem install -V --local --build-root . --force --document=ri,rdoc rubyntlm-0.6.2.gem WARNING: You build with buildroot. Build root: /builddir/build/BUILD/rubyntlm-0.6.2 Bin dir: /builddir/build/BUILD/rubyntlm-0.6.2/usr/bin Gem home: /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/.gitignore /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/.rspec /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/.travis.yml /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/CHANGELOG.md /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/Gemfile /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/LICENSE /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/README.md /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/Rakefile /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/examples/http.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/examples/imap.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/examples/smtp.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/lib/net/ntlm.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/lib/net/ntlm/blob.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/lib/net/ntlm/channel_binding.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/lib/net/ntlm/client.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/lib/net/ntlm/client/session.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/lib/net/ntlm/encode_util.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/lib/net/ntlm/exceptions.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/lib/net/ntlm/field.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/lib/net/ntlm/field_set.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/lib/net/ntlm/int16_le.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/lib/net/ntlm/int32_le.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/lib/net/ntlm/int64_le.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/lib/net/ntlm/message.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/lib/net/ntlm/message/type0.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/lib/net/ntlm/message/type1.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/lib/net/ntlm/message/type2.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/lib/net/ntlm/message/type3.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/lib/net/ntlm/security_buffer.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/lib/net/ntlm/string.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/lib/net/ntlm/target_info.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/lib/net/ntlm/version.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/lib/rubyntlm.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/rubyntlm.gemspec /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/lib/net/ntlm/blob_spec.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/lib/net/ntlm/channel_binding_spec.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/lib/net/ntlm/client/session_spec.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/lib/net/ntlm/client_spec.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/lib/net/ntlm/encode_util_spec.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/lib/net/ntlm/field_set_spec.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/lib/net/ntlm/field_spec.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/lib/net/ntlm/int16_le_spec.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/lib/net/ntlm/int32_le_spec.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/lib/net/ntlm/int64_le_spec.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/lib/net/ntlm/message/type0_spec.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/lib/net/ntlm/message/type1_spec.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/lib/net/ntlm/message/type2_spec.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/lib/net/ntlm/message/type3_spec.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/lib/net/ntlm/message_spec.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/lib/net/ntlm/security_buffer_spec.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/lib/net/ntlm/string_spec.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/lib/net/ntlm/target_info_spec.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/lib/net/ntlm/version_spec.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/lib/net/ntlm_spec.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/spec_helper.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/support/certificates/sha_256_hash.pem /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/support/shared/examples/net/ntlm/field_shared.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/support/shared/examples/net/ntlm/fieldset_shared.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/support/shared/examples/net/ntlm/int_shared.rb /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/support/shared/examples/net/ntlm/message_shared.rb Successfully installed rubyntlm-0.6.2 Parsing documentation for rubyntlm-0.6.2 Parsing sources... 4% [ 1/22] lib/net/ntlm.rb 9% [ 2/22] lib/net/ntlm/blob.rb 13% [ 3/22] lib/net/ntlm/channel_binding.rb 18% [ 4/22] lib/net/ntlm/client.rb 22% [ 5/22] lib/net/ntlm/client/session.rb 27% [ 6/22] lib/net/ntlm/encode_util.rb 31% [ 7/22] lib/net/ntlm/exceptions.rb 36% [ 8/22] lib/net/ntlm/field.rb 40% [ 9/22] lib/net/ntlm/field_set.rb 45% [10/22] lib/net/ntlm/int16_le.rb 50% [11/22] lib/net/ntlm/int32_le.rb 54% [12/22] lib/net/ntlm/int64_le.rb 59% [13/22] lib/net/ntlm/message.rb 63% [14/22] lib/net/ntlm/message/type0.rb 68% [15/22] lib/net/ntlm/message/type1.rb 72% [16/22] lib/net/ntlm/message/type2.rb 77% [17/22] lib/net/ntlm/message/type3.rb 81% [18/22] lib/net/ntlm/security_buffer.rb 86% [19/22] lib/net/ntlm/string.rb 90% [20/22] lib/net/ntlm/target_info.rb 95% [21/22] lib/net/ntlm/version.rb 100% [22/22] lib/rubyntlm.rb Installing ri documentation for rubyntlm-0.6.2 Installing darkfish documentation for rubyntlm-0.6.2 Done installing documentation for rubyntlm after 0 seconds 1 gem installed + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.HgXEBU + umask 022 + cd /builddir/build/BUILD + '[' /builddir/build/BUILDROOT/rubygem-rubyntlm-0.6.2-1.el8.x86_64 '!=' / ']' + rm -rf /builddir/build/BUILDROOT/rubygem-rubyntlm-0.6.2-1.el8.x86_64 ++ dirname /builddir/build/BUILDROOT/rubygem-rubyntlm-0.6.2-1.el8.x86_64 + mkdir -p /builddir/build/BUILDROOT + mkdir /builddir/build/BUILDROOT/rubygem-rubyntlm-0.6.2-1.el8.x86_64 + cd rubyntlm-0.6.2 + mkdir -p /builddir/build/BUILDROOT/rubygem-rubyntlm-0.6.2-1.el8.x86_64/usr/share/gems + cp -a ./usr/share/gems/build_info ./usr/share/gems/cache ./usr/share/gems/doc ./usr/share/gems/extensions ./usr/share/gems/gems ./usr/share/gems/specifications /builddir/build/BUILDROOT/rubygem-rubyntlm-0.6.2-1.el8.x86_64/usr/share/gems/ + /usr/lib/rpm/find-debuginfo.sh -j2 --strict-build-id -m -i --build-id-seed 0.6.2-1.el8 --unique-debug-suffix -0.6.2-1.el8.x86_64 --unique-debug-src-base rubygem-rubyntlm-0.6.2-1.el8.x86_64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000 -S debugsourcefiles.list /builddir/build/BUILD/rubyntlm-0.6.2 + /usr/lib/rpm/check-buildroot + /usr/lib/rpm/redhat/brp-ldconfig /sbin/ldconfig: Warning: ignoring configuration file that cannot be opened: /etc/ld.so.conf: No such file or directory + /usr/lib/rpm/brp-compress + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-python-bytecompile '' 1 + /usr/lib/rpm/brp-python-hardlink + PYTHON3=/usr/libexec/platform-python + /usr/lib/rpm/redhat/brp-mangle-shebangs Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.7iePek + umask 022 + cd /builddir/build/BUILD + cd rubyntlm-0.6.2 + pushd ./usr/share/gems/gems/rubyntlm-0.6.2 ~/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2 ~/build/BUILD/rubyntlm-0.6.2 + sed -i -e '/require .simplecov./ s/^/#/g' spec/spec_helper.rb + rspec spec Net::NTLM::Blob behaves like a fieldset the class is expected to respond to #string is expected to respond to #int16LE is expected to respond to #int32LE is expected to respond to #int64LE is expected to respond to #security_buffer is expected to respond to #prototypes is expected to respond to #names is expected to respond to #types is expected to respond to #opts adding a String Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a Int16LE Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a Int32LE Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a Int64LE Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a SecurityBuffer Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value an instance is expected to respond to #serialize is expected to respond to #parse is expected to respond to #size is expected to respond to #enable is expected to respond to #disable fields is expected to respond to #blob_signature is expected to respond to #reserved is expected to respond to #timestamp is expected to respond to #challenge is expected to respond to #unknown1 is expected to respond to #target_info is expected to respond to #unknown2 blob_signature should be a Net::NTLM::Int32LE should have a default value of 257 should have active set to true reserved should be a Net::NTLM::Int32LE should have a default value of 0 should have active set to true timestamp should be a Net::NTLM::Int64LE should have a default value of 0 should have active set to true challenge should be a Net::NTLM::String should have a default value of should have active set to true unknown1 should be a Net::NTLM::Int32LE should have a default value of 0 should have active set to true target_info should be a Net::NTLM::String should have a default value of should have active set to true unknown2 should be a Net::NTLM::Int32LE should have a default value of 0 should have active set to true Net::NTLM::ChannelBinding #channel_binding_token returns the correct hash Net::NTLM::Client::Session #sign_message signs a message and when KEY_EXCHANGE is true #verify_signature verifies a message signature #seal_message should seal the message #unseal_message should unseal the message #exported_session_key returns a random 16-byte key when negotiate_key_exchange? is true returns the user_session_key when negotiate_key_exchange? is false Net::NTLM::Client #init_context returns a default Type1 message clears session variable on new init_context returns a Type1 message with custom flags calls authenticate! when we receive a Challenge Message Net::NTLM::EncodeUtil #encode_utf16le should convert an ASCII string to UTF #decode_utf16le should convert a UTF string to ASCII Net::NTLM::FieldSet behaves like a fieldset the class is expected to respond to #string is expected to respond to #int16LE is expected to respond to #int32LE is expected to respond to #int64LE is expected to respond to #security_buffer is expected to respond to #prototypes is expected to respond to #names is expected to respond to #types is expected to respond to #opts adding a String Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a Int16LE Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a Int32LE Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a Int64LE Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a SecurityBuffer Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value an instance is expected to respond to #serialize is expected to respond to #parse is expected to respond to #size is expected to respond to #enable is expected to respond to #disable an instance should serialize all the fields should parse a string across the fields should return an aggregate size of all the fields Net::NTLM::Field behaves like a field is expected to respond to #active is expected to respond to #value is expected to respond to #size is expected to respond to #parse is expected to respond to #serialize should set the value from initialize options should set active from initialize options with no size specified should set size to 0 if not active should return 0 if active but no size specified with a size specified should return the size provided in the initialize options if active should still return 0 if not active Net::NTLM::Int16LE behaves like a field is expected to respond to #active is expected to respond to #value is expected to respond to #size is expected to respond to #parse is expected to respond to #serialize should set the value from initialize options should set active from initialize options behaves like an integer field #serialize should serialize properly with an integer value WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Actual error raised was #. Instead consider providing a specific error class or message. This message can be suppressed by setting: `RSpec::Expectations.configuration.on_potential_false_positives = :nothing`. Called from /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/support/shared/examples/net/ntlm/int_shared.rb:17:in `block (3 levels) in '. should raise an Exception for a String WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Actual error raised was #. Instead consider providing a specific error class or message. This message can be suppressed by setting: `RSpec::Expectations.configuration.on_potential_false_positives = :nothing`. Called from /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/support/shared/examples/net/ntlm/int_shared.rb:22:in `block (3 levels) in '. should raise an Exception for Nil #parse should parse a raw 16-bit integer from a string should use an offset to find the 16-bit integer in the string should return 0 and not change the value if the string is not big enough Net::NTLM::Int32LE behaves like a field is expected to respond to #active is expected to respond to #value is expected to respond to #size is expected to respond to #parse is expected to respond to #serialize should set the value from initialize options should set active from initialize options behaves like an integer field #serialize should serialize properly with an integer value WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Actual error raised was #. Instead consider providing a specific error class or message. This message can be suppressed by setting: `RSpec::Expectations.configuration.on_potential_false_positives = :nothing`. Called from /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/support/shared/examples/net/ntlm/int_shared.rb:17:in `block (3 levels) in '. should raise an Exception for a String WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Actual error raised was #. Instead consider providing a specific error class or message. This message can be suppressed by setting: `RSpec::Expectations.configuration.on_potential_false_positives = :nothing`. Called from /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/support/shared/examples/net/ntlm/int_shared.rb:22:in `block (3 levels) in '. should raise an Exception for Nil #parse should parse a raw 32-bit integer from a string should use an offset to find the 32-bit integer in the string should return 0 and not change the value if the string is not big enough Net::NTLM::Int64LE behaves like a field is expected to respond to #active is expected to respond to #value is expected to respond to #size is expected to respond to #parse is expected to respond to #serialize should set the value from initialize options should set active from initialize options behaves like an integer field #serialize should serialize properly with an integer value WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Actual error raised was #. Instead consider providing a specific error class or message. This message can be suppressed by setting: `RSpec::Expectations.configuration.on_potential_false_positives = :nothing`. Called from /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/support/shared/examples/net/ntlm/int_shared.rb:17:in `block (3 levels) in '. should raise an Exception for a String WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Actual error raised was #>' for nil:NilClass>. Instead consider providing a specific error class or message. This message can be suppressed by setting: `RSpec::Expectations.configuration.on_potential_false_positives = :nothing`. Called from /builddir/build/BUILD/rubyntlm-0.6.2/usr/share/gems/gems/rubyntlm-0.6.2/spec/support/shared/examples/net/ntlm/int_shared.rb:22:in `block (3 levels) in '. should raise an Exception for Nil #parse should parse a raw 64-bit integer from a string should use an offset to find the 64-bit integer in the string should return 0 and not change the value if the string is not big enough Net::NTLM::Message::Type0 behaves like a fieldset the class is expected to respond to #string is expected to respond to #int16LE is expected to respond to #int32LE is expected to respond to #int64LE is expected to respond to #security_buffer is expected to respond to #prototypes is expected to respond to #names is expected to respond to #types is expected to respond to #opts adding a String Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a Int16LE Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a Int32LE Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a Int64LE Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a SecurityBuffer Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value an instance is expected to respond to #serialize is expected to respond to #parse is expected to respond to #size is expected to respond to #enable is expected to respond to #disable fields is expected to respond to #sign is expected to respond to #type sign should be a Net::NTLM::String should have a default value of NTLMSSP should have active set to true type should be a Net::NTLM::Int32LE should have a default value of 0 should have active set to true behaves like a message is expected to respond to #has_flag? is expected to respond to #set_flag is expected to respond to #dump_flags is expected to respond to #encode64 is expected to respond to #decode64 is expected to respond to #head_size is expected to respond to #data_size is expected to respond to #size is expected to respond to #security_buffers is expected to respond to #deflag is expected to respond to #data_edge should be able to check if the UNICODE flag is set should be able to check if the OEM flag is set should be able to check if the REQUEST_TARGET flag is set should be able to check if the NTLM flag is set should be able to check if the ALWAYS_SIGN flag is set should be able to check if the NTLM2_KEY flag is set should be able to set a new flag Net::NTLM::Message::Type1 should deserialize should serialize behaves like a fieldset the class is expected to respond to #string is expected to respond to #int16LE is expected to respond to #int32LE is expected to respond to #int64LE is expected to respond to #security_buffer is expected to respond to #prototypes is expected to respond to #names is expected to respond to #types is expected to respond to #opts adding a String Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a Int16LE Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a Int32LE Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a Int64LE Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a SecurityBuffer Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value an instance is expected to respond to #serialize is expected to respond to #parse is expected to respond to #size is expected to respond to #enable is expected to respond to #disable fields is expected to respond to #sign is expected to respond to #type is expected to respond to #flag is expected to respond to #domain is expected to respond to #workstation is expected to respond to #os_version sign should be a Net::NTLM::String should have a default value of NTLMSSP should have active set to true type should be a Net::NTLM::Int32LE should have a default value of 1 should have active set to true flag should be a Net::NTLM::Int32LE should have a default value of 557575 should have active set to true domain should be a Net::NTLM::SecurityBuffer should have a default value of should have active set to true workstation should be a Net::NTLM::SecurityBuffer should have a default value of 417fc9df5fe24d5ea8bb77904fdc1f9f should have active set to true os_version should be a Net::NTLM::String should have a default value of should have active set to false behaves like a message is expected to respond to #has_flag? is expected to respond to #set_flag is expected to respond to #dump_flags is expected to respond to #encode64 is expected to respond to #decode64 is expected to respond to #head_size is expected to respond to #data_size is expected to respond to #size is expected to respond to #security_buffers is expected to respond to #deflag is expected to respond to #data_edge should be able to check if the UNICODE flag is set should be able to check if the OEM flag is set should be able to check if the REQUEST_TARGET flag is set should be able to check if the NTLM flag is set should be able to check if the ALWAYS_SIGN flag is set should be able to check if the NTLM2_KEY flag is set should be able to set a new flag .parse NTLM2 Session Response Authentication; NTLM2 Signing and Sealing Using the 128-bit NTLM2 Session Response User Session Key With Key Exchange Negotiated should set the magic should set the type should set the flags should have empty workstation should have empty domain NTLMv2 Authentication; NTLM1 Signing and Sealing Using the 40-bit NTLMv2 User Session Key should set the magic should set the type should set the flags should have empty workstation should have empty domain NTLMv2 with OS version should set the magic should set the type should have empty workstation should have empty domain should set OS version info Net::NTLM::Message::Type2 should deserialize should serialize should generate a type 3 response should upcase domain when provided behaves like a fieldset the class is expected to respond to #string is expected to respond to #int16LE is expected to respond to #int32LE is expected to respond to #int64LE is expected to respond to #security_buffer is expected to respond to #prototypes is expected to respond to #names is expected to respond to #types is expected to respond to #opts adding a String Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a Int16LE Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a Int32LE Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a Int64LE Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a SecurityBuffer Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value an instance is expected to respond to #serialize is expected to respond to #parse is expected to respond to #size is expected to respond to #enable is expected to respond to #disable fields is expected to respond to #sign is expected to respond to #type is expected to respond to #challenge is expected to respond to #context is expected to respond to #flag is expected to respond to #target_name is expected to respond to #target_info is expected to respond to #os_version sign should be a Net::NTLM::String should have a default value of NTLMSSP should have active set to true type should be a Net::NTLM::Int32LE should have a default value of 2 should have active set to true challenge should be a Net::NTLM::Int64LE should have a default value of 0 should have active set to true context should be a Net::NTLM::Int64LE should have a default value of 0 should have active set to false flag should be a Net::NTLM::Int32LE should have a default value of 1 should have active set to true target_name should be a Net::NTLM::SecurityBuffer should have a default value of should have active set to true target_info should be a Net::NTLM::SecurityBuffer should have a default value of should have active set to false os_version should be a Net::NTLM::String should have a default value of should have active set to false behaves like a message is expected to respond to #has_flag? is expected to respond to #set_flag is expected to respond to #dump_flags is expected to respond to #encode64 is expected to respond to #decode64 is expected to respond to #head_size is expected to respond to #data_size is expected to respond to #size is expected to respond to #security_buffers is expected to respond to #deflag is expected to respond to #data_edge should be able to check if the UNICODE flag is set should be able to set a new flag .parse NTLM2 Session Response Authentication; NTLM2 Signing and Sealing Using the 128-bit NTLM2 Session Response User Session Key With Key Exchange Negotiated should set the magic should set the type should set the target name should set the flags should set the challenge should set an empty context should set target info Net::NTLM::Message::Type3 behaves like a fieldset the class is expected to respond to #string is expected to respond to #int16LE is expected to respond to #int32LE is expected to respond to #int64LE is expected to respond to #security_buffer is expected to respond to #prototypes is expected to respond to #names is expected to respond to #types is expected to respond to #opts adding a String Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a Int16LE Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a Int32LE Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a Int64LE Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a SecurityBuffer Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value an instance is expected to respond to #serialize is expected to respond to #parse is expected to respond to #size is expected to respond to #enable is expected to respond to #disable fields is expected to respond to #sign is expected to respond to #type is expected to respond to #lm_response is expected to respond to #ntlm_response is expected to respond to #domain is expected to respond to #user is expected to respond to #workstation is expected to respond to #session_key is expected to respond to #flag sign should be a Net::NTLM::String should have a default value of NTLMSSP should have active set to true type should be a Net::NTLM::Int32LE should have a default value of 3 should have active set to true lm_response should be a Net::NTLM::SecurityBuffer should have a default value of should have active set to true ntlm_response should be a Net::NTLM::SecurityBuffer should have a default value of should have active set to true domain should be a Net::NTLM::SecurityBuffer should have a default value of should have active set to true user should be a Net::NTLM::SecurityBuffer should have a default value of should have active set to true workstation should be a Net::NTLM::SecurityBuffer should have a default value of should have active set to true session_key should be a Net::NTLM::SecurityBuffer should have a default value of should have active set to false flag should be a Net::NTLM::Int32LE should have a default value of 0 should have active set to false behaves like a message is expected to respond to #has_flag? is expected to respond to #set_flag is expected to respond to #dump_flags is expected to respond to #encode64 is expected to respond to #decode64 is expected to respond to #head_size is expected to respond to #data_size is expected to respond to #size is expected to respond to #security_buffers is expected to respond to #deflag is expected to respond to #data_edge should be able to set a new flag .parse with NTLMv2 data should set the magic should set the type should set the LM response should set the NTLM response should set the user should set the domain should set the workstation should set the session key should set the flags should NOT set the OS version structure #blank_password? should be true #ntlm_version should be :ntlmv2 NTLM2 Session Response Authentication; NTLM2 Signing and Sealing Using the 128-bit NTLM2 Session Response User Session Key With Key Exchange Negotiated should set the LM response should set the NTLM response should set the domain should set the user should set the workstation should set the session key #password? should be true for "test1234" #blank_password? should be false #ntlm_version should be :ntlm2_session NTLMv2 Authentication; NTLM1 Signing and Sealing Using the 40-bit NTLMv2 User Session Key should set the NTLM response should set the domain should set the user should set the workstation #ntlm_version should be :ntlmv2 Net::NTLM::Message behaves like a fieldset the class is expected to respond to #string is expected to respond to #int16LE is expected to respond to #int32LE is expected to respond to #int64LE is expected to respond to #security_buffer is expected to respond to #prototypes is expected to respond to #names is expected to respond to #types is expected to respond to #opts adding a String Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a Int16LE Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a Int32LE Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a Int64LE Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a SecurityBuffer Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value an instance is expected to respond to #serialize is expected to respond to #parse is expected to respond to #size is expected to respond to #enable is expected to respond to #disable behaves like a message is expected to respond to #has_flag? is expected to respond to #set_flag is expected to respond to #dump_flags is expected to respond to #encode64 is expected to respond to #decode64 is expected to respond to #head_size is expected to respond to #data_size is expected to respond to #size is expected to respond to #security_buffers is expected to respond to #deflag is expected to respond to #data_edge should be able to check if the UNICODE flag is set should be able to check if the OEM flag is set should be able to check if the REQUEST_TARGET flag is set should be able to check if the NTLM flag is set should be able to check if the ALWAYS_SIGN flag is set should be able to check if the NTLM2_KEY flag is set should be able to set a new flag Net::NTLM::SecurityBuffer behaves like a fieldset the class is expected to respond to #string is expected to respond to #int16LE is expected to respond to #int32LE is expected to respond to #int64LE is expected to respond to #security_buffer is expected to respond to #prototypes is expected to respond to #names is expected to respond to #types is expected to respond to #opts adding a String Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a Int16LE Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a Int32LE Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a Int64LE Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value adding a SecurityBuffer Field should set the prototypes correctly should set the names correctly should set the types correctly should set the opts correctly when creating an instance should have the new accessor should have the correct default value an instance is expected to respond to #serialize is expected to respond to #parse is expected to respond to #size is expected to respond to #enable is expected to respond to #disable fields is expected to respond to #length is expected to respond to #allocated is expected to respond to #offset length should be a Net::NTLM::Int16LE should have a default value of 0 should have active set to true allocated should be a Net::NTLM::Int16LE should have a default value of 0 should have active set to true offset should be a Net::NTLM::Int32LE should have a default value of 0 should have active set to true behaves like a field is expected to respond to #active is expected to respond to #value is expected to respond to #size is expected to respond to #parse is expected to respond to #serialize should set the value from initialize options should set active from initialize options when setting the value directly should change the value should adjust the length field to the size of the new value should adjust the allocated field to the size of the new value #data_size should return the size of the value if active should return 0 if inactive #parse should read in a properly formatted string Net::NTLM::String behaves like a field is expected to respond to #active is expected to respond to #value is expected to respond to #size is expected to respond to #parse is expected to respond to #serialize should set the value from initialize options should set active from initialize options #serialize should return the value when active should return an empty string when inactive should coerce non-string values into strings should return empty string on a nil #value= should set active to false if it empty should adjust the size based on the value set #parse should read in a string of the proper size should not read in a string that is too small should be able to read from an offset and only for the given size Net::NTLM::TargetInfo invalid data invalid pair id returns an error #av_pairs returns the pair values with the given keys target data is nil returns the pair values with the given keys #to_s returns bytes with any new data added Net::NTLM::VERSION should contain an integer value for Major Version should contain an integer value for Minor Version should contain an integer value for Patch Version should contain an aggregate version string Net::NTLM should convert a value to 64-bit LE Integer should split a string into an array of slices, 7 chars or less should generate DES keys from the supplied string should encrypt the string with DES for each key supplied should generate an lm_hash should generate an ntlm_hash should generate an ntlmv2_hash should generate an lm_response should generate an ntlm_response should generate a lvm2_response should generate a ntlmv2_response should generate a ntlm2_session when a user passes an NTLM hash for pass-the-hash should return the correct ntlmv2 hash Finished in 0.26147 seconds (files took 0.15704 seconds to load) 741 examples, 0 failures + popd ~/build/BUILD/rubyntlm-0.6.2 + exit 0 Processing files: rubygem-rubyntlm-0.6.2-1.el8.noarch Provides: rubygem(rubyntlm) = 0.6.2-1 rubygem-rubyntlm = 0.6.2-1.el8 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: ruby(rubygems) Processing files: rubygem-rubyntlm-doc-0.6.2-1.el8.noarch Provides: rubygem-rubyntlm-doc = 0.6.2-1.el8 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Checking for unpackaged file(s): /usr/lib/rpm/check-files /builddir/build/BUILDROOT/rubygem-rubyntlm-0.6.2-1.el8.x86_64 Wrote: /builddir/build/RPMS/rubygem-rubyntlm-0.6.2-1.el8.noarch.rpm Wrote: /builddir/build/RPMS/rubygem-rubyntlm-doc-0.6.2-1.el8.noarch.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.JPgFHC + umask 022 + cd /builddir/build/BUILD + cd rubyntlm-0.6.2 + /usr/bin/rm -rf /builddir/build/BUILDROOT/rubygem-rubyntlm-0.6.2-1.el8.x86_64 + exit 0 Child return code was: 0