%if 0%{?rhel} >= 9 %bcond_with perl_IO_Socket_SSL_test_unused_idn %bcond_with perl_IO_Socket_SSL_test_IO_Socket_INET6 %else %bcond_without perl_IO_Socket_SSL_test_unused_idn %bcond_without perl_IO_Socket_SSL_test_IO_Socket_INET6 %endif Name: perl-IO-Socket-SSL Version: 2.083 Release: 3%{?dist} Summary: Perl library for transparent SSL License: (GPL-1.0-or-later OR Artistic-1.0-Perl) AND MPL-2.0 URL: https://metacpan.org/release/IO-Socket-SSL Source0: https://cpan.metacpan.org/modules/by-module/IO/IO-Socket-SSL-%{version}.tar.gz Patch0: IO-Socket-SSL-2.082-use-system-default-cipher-list.patch Patch1: IO-Socket-SSL-2.082-use-system-default-SSL-version.patch # A test for Enable-Post-Handshake-Authentication-TLSv1.3-feature.patch, # bug #1632660, requires openssl tool Patch2: IO-Socket-SSL-2.080-Test-client-performs-Post-Handshake-Authentication.patch BuildArch: noarch # Module Build BuildRequires: coreutils BuildRequires: make BuildRequires: perl-generators BuildRequires: perl-interpreter BuildRequires: perl(ExtUtils::MakeMaker) >= 6.76 # Module Runtime BuildRequires: openssl-libs >= 0.9.8 BuildRequires: perl(Carp) BuildRequires: perl(Config) BuildRequires: perl(constant) BuildRequires: perl(Errno) BuildRequires: perl(Exporter) BuildRequires: perl(HTTP::Tiny) BuildRequires: perl(IO::Socket) BuildRequires: perl(IO::Socket::INET) BuildRequires: perl(IO::Socket::IP) >= 0.31 BuildRequires: perl(Net::SSLeay) >= 1.46 BuildRequires: perl(Scalar::Util) BuildRequires: perl(Socket) >= 1.95 BuildRequires: perl(strict) BuildRequires: perl(URI::_idna) BuildRequires: perl(vars) BuildRequires: perl(warnings) # Test Suite # openssl tool required for Test-client-performs-Post-Handshake-Authentication.patch BuildRequires: openssl BuildRequires: perl(Data::Dumper) BuildRequires: perl(File::Temp) BuildRequires: perl(FindBin) BuildRequires: perl(IO::Select) %if %{with perl_IO_Socket_SSL_test_IO_Socket_INET6} BuildRequires: perl(IO::Socket::INET6) >= 2.62 %endif # IPC::Run for Test-client-performs-Post-Handshake-Authentication.patch BuildRequires: perl(IPC::Run) %if %{with perl_IO_Socket_SSL_test_unused_idn} BuildRequires: perl(Net::IDN::Encode) BuildRequires: perl(Net::LibIDN) %endif BuildRequires: perl(Test::More) >= 0.88 BuildRequires: perl(utf8) BuildRequires: procps # Runtime Requires: openssl-libs >= 0.9.8 Requires: perl(Config) Requires: perl(HTTP::Tiny) Requires: perl(IO::Socket::INET) Requires: perl(IO::Socket::IP) >= 0.31 Requires: perl(Socket) >= 1.95 Requires: perl(URI::_idna) %description This module is a true drop-in replacement for IO::Socket::INET that uses SSL to encrypt data before it is transferred to a remote server or client. IO::Socket::SSL supports all the extra features that one needs to write a full-featured SSL client or server application: multiple SSL contexts, cipher selection, certificate verification, and SSL version selection. As an extra bonus, it works perfectly with mod_perl. %prep %setup -q -n IO-Socket-SSL-%{version} # Use system-wide default cipher list to support use of system-wide # crypto policy (#1076390, #1127577, CPAN RT#97816) # https://fedoraproject.org/wiki/Changes/CryptoPolicy %patch -P 0 # Use system-default SSL version too %patch -P 1 # Add a test for PHA %patch -P 2 -p1 %build NO_NETWORK_TESTING=1 perl Makefile.PL \ INSTALLDIRS=vendor \ NO_PACKLIST=1 \ NO_PERLLOCAL=1 %{make_build} %install %{make_install} %{_fixperms} -c %{buildroot} %check make test %files # GPL-1.0-or-later OR Artistic-1.0-Perl %doc BUGS Changes README docs/ example/ %dir %{perl_vendorlib}/IO/ %dir %{perl_vendorlib}/IO/Socket/ %dir %{perl_vendorlib}/IO/Socket/SSL/ %doc %{perl_vendorlib}/IO/Socket/SSL.pod %{perl_vendorlib}/IO/Socket/SSL.pm %{perl_vendorlib}/IO/Socket/SSL/Intercept.pm %{perl_vendorlib}/IO/Socket/SSL/Utils.pm %{_mandir}/man3/IO::Socket::SSL.3* %{_mandir}/man3/IO::Socket::SSL::Intercept.3* %{_mandir}/man3/IO::Socket::SSL::Utils.3* # MPL-2.0 %{perl_vendorlib}/IO/Socket/SSL/PublicSuffix.pm %{_mandir}/man3/IO::Socket::SSL::PublicSuffix.3* %changelog * Thu Jul 20 2023 Fedora Release Engineering - 2.083-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_39_Mass_Rebuild * Tue Jun 27 2023 Jitka Plesnikova - 2.083-2 - Disable optional IO::Socket::INET6 tests on ELN * Thu May 18 2023 Paul Howarth - 2.083-1 - Update to 2.083 - Fix t/protocol_version.t for OpenSSL versions that don't support SECLEVEL (regression from GH#122) * Thu May 18 2023 Paul Howarth - 2.082-1 - Update to 2.082 - SSL_version default now TLS 1.2+ since TLS 1.1 and lower are deprecated (GH#122) - Fix output of alert string when debugging (GH#132) - Improve regex for hostname validation (GH#130, (GH#126) - Add can_ciphersuites subroutine for feature checking (GH#127) - Utils::CERT_create - die if unexpected arguments are given instead of ignoring these - Avoid use of deprecated patch syntax * Wed Jan 25 2023 Paul Howarth - 2.081-1 - Update to 2.081 - New function set_msg_callback for user defined callback on each SSL message - Showcase function in example/ssl_client.pl and example/ssl_server.pl for computing JA3S/JA3 fingerprints - Fix tracing added in 2.076 to no longer include SSL3_RT_HEADER (noise) * Fri Jan 20 2023 Fedora Release Engineering - 2.080-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_38_Mass_Rebuild * Wed Jan 18 2023 Paul Howarth - 2.080-1 - Update to 2.080 - Move test certificates into t/ directory where they belong * Mon Jan 16 2023 Paul Howarth - 2.079-1 - Update to 2.079 - Properly extract IPv6 address for verification from PeerAddr if not explicitly given as SSL_verifycn_name (GH#123) * Mon Dec 12 2022 Paul Howarth - 2.078-1 - Update to 2.078 - Revert decision from 2014 to not verify hostname by default if hostname is IP address but no explicit verification scheme given (GH#121) * Mon Nov 21 2022 Paul Howarth - 2.077-1 - Update to 2.077 - Fix memory leak in session cache (GH#118) - More race conditions in tests fixed (GH#97) * Mon Nov 14 2022 Paul Howarth - 2.076-1 - Update to 2.076 - Added curl like tracing (based on GH#117) - Fixed race condition in t/sni_verify.t (GH#97) * Sat Sep 3 2022 Paul Howarth - 2.075-1 - Update to 2.075 - Treat SSL_write returning 0 same as previously -1, as suggested by both OpenSSL and LibreSSL documentation - Propagate error from SSL_shutdown, unless the shutdown is caused by an outer SSL error, in which case keep the original error - Small test fixes - Use SPDX-format license tag * Fri Jul 22 2022 Fedora Release Engineering - 2.074-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild * Wed Jun 01 2022 Jitka Plesnikova - 2.074-3 - Perl 5.36 rebuild * Fri Jan 21 2022 Fedora Release Engineering - 2.074-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Sat Jan 8 2022 Paul Howarth - 2.074-1 - Update to 2.074 - Add SSL_ciphersuites option for TLS 1.3 ciphers - No longer use own default for ciphers: instead, use system default but disable some weak ciphers that might still be enabled on older systems * Thu Dec 23 2021 Paul Howarth - 2.073-1 - Update to 2.073 - Fix behavior and tests for OpenSSL 3.0.1 - Fix GH#110 - prevent internal error warning in some cases * Tue Sep 14 2021 Sahana Prasad - 2.072-2 - Rebuilt with OpenSSL 3.0.0 * Tue Aug 17 2021 Paul Howarth - 2.072-1 - Update to 2.072 - Add PEM_certs2file and PEM_file2certs in IO::Socket::SSL::Utils based on idea in GH#101 - certs/*.p12 used for testing should now work with OpenSSL 3.0 too (GH#108) - Update public suffix database - Drop patch for building with OpenSSL 1.1.1e * Thu Jul 22 2021 Fedora Release Engineering - 2.071-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild * Tue May 25 2021 Paul Howarth - 2.071-1 - Update to 2.071 - Fix t/nonblock.t race on some systems (fixes GH#102, maybe GH#98 too) * Fri May 21 2021 Jitka Plesnikova - 2.070-3 - Perl 5.34 rebuild * Fri Mar 19 2021 Petr Pisar - 2.070-2 - Disable optional libidn tests on ELN * Fri Feb 26 2021 Paul Howarth - 2.070-1 - Update to 2.070 - Changed bugtracker in Makefile.PL to GitHub, away from obsolete rt.cpan.org * Wed Jan 27 2021 Fedora Release Engineering - 2.069-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild * Sat Jan 23 2021 Paul Howarth - 2.069-1 - Update to 2.069 - IO::Socket::Utils CERT_asHash and CERT_create now support subject and issuer with multiple same parts (like multiple OU); in this case an array ref instead of a scalar is used as hash value (GH#95) * Tue Jul 28 2020 Fedora Release Engineering - 2.068-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild * Tue Jun 23 2020 Jitka Plesnikova - 2.068-2 - Perl 5.32 rebuild * Tue Mar 31 2020 Paul Howarth - 2.068-1 - Update to 2.068 - Treat OpenSSL 1.1.1e as broken and refuse to build with it in order to prevent follow-up problems in tests and user code https://github.com/noxxi/p5-io-socket-ssl/issues/93 https://github.com/openssl/openssl/issues/11388 https://github.com/openssl/openssl/issues/11378 - Update PublicSuffix with latest data from publicsuffix.org - Patch out the refusal to build with OpenSSL 1.1.1e as the OpenSSL package in Fedora has had the problematic EOF-handling change reverted * Sat Mar 21 2020 Paul Howarth - 2.067-2 - Fix FTBFS with OpenSSL 1.1.1e https://github.com/noxxi/p5-io-socket-ssl/issues/93 * Sat Feb 15 2020 Paul Howarth - 2.067-1 - Update to 2.067 - Fix memory leak on incomplete handshake (GH#92) - Add support for SSL_MODE_RELEASE_BUFFERS via SSL_mode_release_buffers; this can decrease memory usage at the costs of more allocations (CPAN RT#129463) - More detailed error messages when loading of certificate file failed (GH#89) - Fix for ip_in_cn == 6 in verify_hostname scheme (CPAN RT#131384) - Deal with new MODE_AUTO_RETRY default in OpenSSL 1.1.1 - Fix warning when no ecdh support is available - Documentation update regarding use of select and TLS 1.3 - Various fixes in documentation (GH#81, GH#87, GH#90, GH#91) - Stability fix for t/core.t * Thu Jan 30 2020 Fedora Release Engineering - 2.066-8 - Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild * Mon Nov 25 2019 Petr Pisar - 2.066-7 - Default to PROFILE=SYSTEM cipher list (bug #1775167) * Fri Jul 26 2019 Fedora Release Engineering - 2.066-6 - Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild * Thu Jun 27 2019 Paul Howarth - 2.066-5 - Runtime openssl dependency should be on openssl-libs - Always require preferred IPv6 back-end: IO::Socket::IP ≥ 0.31 - Always require preferred IDN back-end: URI::_idna - Modernize spec using %%{make_build} and %%{make_install} * Wed Jun 26 2019 Paul Howarth - 2.066-4 - PublicSuffix.pm is licensed MPLv2.0 (#1724169) * Mon Jun 17 2019 Petr Pisar - 2.066-3 - Skip a PHA test if Net::SSLeay does not expose the PHA (bug #1632660) * Fri May 31 2019 Jitka Plesnikova - 2.066-2 - Perl 5.30 rebuild * Wed Mar 6 2019 Paul Howarth - 2.066-1 - Update to 2.066 - Make sure that Net::SSLeay::CTX_get0_param is defined before using X509_V_FLAG_PARTIAL_CHAIN; Net::SSLeay 1.85 defined only the second with LibreSSL 2.7.4 but not the first (CPAN RT#128716) - Prefer AES for server side cipher default since it is usually hardware-accelerated - Fix test t/verify_partial_chain.t by using the newly exposed function can_partial_chain instead of guessing (wrongly) if the functionality is available * Mon Mar 4 2019 Paul Howarth - 2.064-1 - Update to 2.064 - Make algorithm for fingerprint optional, i.e. detect based on length of fingerprint (CPAN RT#127773) - Fix t/sessions.t and improve stability of t/verify_hostname.t on Windows - Use CTX_set_ecdh_auto when needed (OpenSSL 1.0.2) if explicit curves are set - Update fingerprints for live tests * Sat Mar 2 2019 Paul Howarth - 2.063-1 - Update to 2.063 - Support for both RSA and ECDSA certificate on same domain - Update PublicSuffix - Refuse to build if Net::SSLeay is compiled with one version of OpenSSL but then linked against another API-incompatible version (i.e. more than just the patchlevel differs) * Mon Feb 25 2019 Paul Howarth - 2.062-1 - Update to 2.062 - Enable X509_V_FLAG_PARTIAL_CHAIN if supported by Net::SSLeay (1.83+) and OpenSSL (1.1.0+); this makes leaf certificates or intermediate certificates in the trust store be usable as full trust anchors too * Sat Feb 23 2019 Paul Howarth - 2.061-1 - Update to 2.061 - Support for TLS 1.3 session reuse (needs Net::SSLeay ≥ 1.86); note that the previous (and undocumented) API for the session cache has been changed - Support for multiple curves, automatic setting of curves and setting of supported curves in client (needs Net::SSLeay ≥ 1.86) - Enable Post-Handshake-Authentication (TLSv1.3 feature) client-side when client certificates are provided (needs Net::SSLeay ≥ 1.86) * Thu Feb 07 2019 Petr Pisar - 2.060-4 - Client sends a post-handshake-authentication extension if a client key and a certificate are available (bug #1632660) * Fri Feb 01 2019 Fedora Release Engineering - 2.060-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild * Mon Sep 24 2018 Petr Pisar - 2.060-2 - Prevent tests from dying on SIGPIPE (CPAN RT#126899) * Mon Sep 17 2018 Paul Howarth - 2.060-1 - Update to 2.060 - Support for TLS 1.3 with OpenSSL 1.1.1 (needs Net::SSLeay ≥ 1.86); see also CPAN RT#126899 - TLS 1.3 support is not complete yet for session reuse * Tue Aug 21 2018 Petr Pisar - 2.059-2 - Adapt to OpenSSL 1.1.1, it requires patched Net-SSLeay (bug #1616198) * Thu Aug 16 2018 Paul Howarth - 2.059-1 - Update to 2.059 - Fix memory leak when CRLs are used (CPAN RT#125867) - Fix memory leak when using stop_SSL and threads (https://rt.cpan.org/Ticket/Display.html?id=125867#txn-1797132) * Thu Jul 19 2018 Paul Howarth - 2.058-1 - Update to 2.058 - Fix memory leak that occurred with explicit stop_SSL in connection with non-blocking sockets or timeout (CPAN RT#125867) - Fix redefine warnings in case Socket6 is installed but neither IO::Socket::IP nor IO::Socket::INET6 (CPAN RT#124963) - IO::Socket::SSL::Intercept - optional 'serial' argument can be starting number or callback to create serial number based on the original certificate - New function get_session_reused to check if a session got reused - IO::Socket::SSL::Utils::CERT_asHash: fingerprint_xxx now set to the correct value - Fix t/session_ticket.t: It failed with OpenSSL 1.1.* since this version expects the extKeyUsage of clientAuth in the client cert also to be allowed by the CA if CA uses extKeyUsage * Fri Jul 13 2018 Fedora Release Engineering - 2.056-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild * Thu Jun 28 2018 Jitka Plesnikova - 2.056-2 - Perl 5.28 rebuild * Mon Feb 19 2018 Paul Howarth - 2.056-1 - Update to 2.056 - Intercept: Fix creation of serial number (basing it on binary digest instead of treating hex fingerprint as binary), allow use of own serial numbers again - t/io-socket-ip.t: Skip test if no IPv6 support on system (CPAN RT#124464) - Update PublicSuffix * Thu Feb 15 2018 Paul Howarth - 2.055-1 - Update to 2.055 - Use SNI also if hostname was given all-uppercase - Utils::CERT_create: Don't add authority key for issuer since Chrome does not like this - Intercept: - Change behavior of code-based cache to better support synchronizing within multiprocess/threaded set-ups - Don't use counter for serial number but somehow base it on original certificate in order to avoid conflicts with reuse of serial numbers after restart - Better support platforms without IPv6 (CPAN RT#124431) - Spelling fixes in documentation (CPAN RT#124306) * Thu Feb 08 2018 Fedora Release Engineering - 2.054-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild * Mon Jan 22 2018 Paul Howarth - 2.054-1 - Update to 2.054 - Small behavior fixes - If SSL_fingerprint is used and matches, don't check for OCSP - Utils::CERT_create: Small fixes to properly specific purpose, ability to use predefined complex purpose but disable some features - Update PublicSuffix - Updates for documentation, especially regarding pitfalls with forking or using non-blocking sockets, spelling fixes - Test fixes and improvements - Stability improvements for live tests - Regenerate certificates in certs/ and make sure they are limited to the correct purpose; check in program used to generate certificates - Adjust tests since certificates have changed and some tests used certificates intended for client authentication as server certificates, which now no longer works * Mon Oct 23 2017 Paul Howarth - 2.052-1 - Update to 2.052 - Disable NPN support if LibreSSL ≥ 2.6.1 is detected since they've replaced the functions with dummies instead of removing NPN completly or setting OPENSSL_NO_NEXTPROTONEG - t/01loadmodule.t shows more output helpful in debugging problems - Update fingerprints for external tests - Update documentation to make behavior of syswrite more clear * Tue Sep 5 2017 Paul Howarth - 2.051-1 - Update to 2.051 - syswrite: If SSL_write sets SSL_ERROR_SYSCALL but not $! (as seen with OpenSSL 1.1.0 on Windows), set $! to EPIPE to propagate a useful error up (GH#62) * Fri Aug 18 2017 Paul Howarth - 2.050-1 - Update to 2.050 - Removed unnecessary settings of SSL_version and SSL_cipher_list from tests - protocol_version.t can now deal when TLS 1.0 and/or TLS 1.1 are not supported, as is the case with openssl versions in latest Debian (buster) * Thu Jul 27 2017 Fedora Release Engineering - 2.049-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild * Mon Jun 12 2017 Paul Howarth - 2.049-1 - Update to 2.049 - Fixed problem caused by typo in the context of session cache (GH#60) - Updated PublicSuffix information from publicsuffix.org * Mon Jun 05 2017 Jitka Plesnikova - 2.048-2 - Perl 5.26 rebuild * Mon Apr 17 2017 Paul Howarth - 2.048-1 - Update to 2.048 - Fixed small memory leaks during destruction of socket and context (CPAN RT#120643) - Drop support for EOL distributions prior to F-13 - Drop BuildRoot: and Group: tags - Drop explicit buildroot cleaning in %%install section - Drop explicit %%clean section * Fri Feb 17 2017 Paul Howarth - 2.047-1 - Update to 2.047 - Better fix for problem which 2.046 tried to fix but broke LWP that way - Update patches as needed * Thu Feb 16 2017 Paul Howarth - 2.046-1 - Update to 2.046 - Clean up everything in DESTROY and make sure to start with a fresh %%{*self} in configure_SSL because it can happen that a GLOB gets used again without calling DESTROY (https://github.com/noxxi/p5-io-socket-ssl/issues/56) - Update patches as needed * Tue Feb 14 2017 Paul Howarth - 2.045-1 - Update to 2.045 - Fixed memory leak caused by not destroying CREATED_IN_THIS_THREAD for SSL objects (GH#55) - Optimization: don't track SSL objects and CTX in *CREATED_IN_THIS_THREAD if perl is compiled without thread support - Small fix in t/protocol_version.t to use older versions of Net::SSLeay with openssl build without SSLv3 support - When setting SSL_keepSocketOnError to true the socket will not be closed on fatal error (GH#53, modified) - Update patches as needed * Sat Feb 11 2017 Fedora Release Engineering - 2.044-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild * Thu Jan 26 2017 Paul Howarth - 2.044-1 - Update to 2.044 - Protect various 'eval'-based capability detections at startup with a localized __DIE__ handler; this way, dynamically requiring IO::Socket::SSL as done by various third party software should cause less problems even if there is a global __DIE__ handler that does not properly deal with 'eval' - Update patches as needed * Fri Jan 6 2017 Paul Howarth - 2.043-1 - Update to 2.043 - Enable session ticket callback with Net::SSLeay ≥ 1.80 - Make t/session_ticket.t work with OpenSSL 1.1.0; with this version the session no longer gets reused if it was not properly closed, which is now done using an explicit close by the client - Update patches as needed * Wed Jan 4 2017 Paul Howarth - 2.041-1 - Update to 2.041 - Leave session ticket callback off for now until the needed patch is included in Net::SSLeay (see https://rt.cpan.org/Ticket/Display.html?id=116118#txn-1696146) - Update patches as needed * Sun Dec 18 2016 Paul Howarth - 2.040-1 - Update to 2.040 - Fix detection of default CA path for OpenSSL 1.1.x - Utils::CERT_asHash now includes the signature algorithm used - Utils::CERT_asHash can now deal with large serial numbers - Update patches as needed * Mon Nov 21 2016 Paul Howarth - 2.039-1 - Update to 2.039 - OpenSSL 1.1.0c changed the behavior of SSL_read so that it now returns -1 on EOF without proper SSL shutdown; since it looks like that this behavior will be kept at least for 1.1.1+, adapt to the changed API by treating errno=NOERR on SSL_ERROR_SYSCALL as EOF - Update patches as needed * Mon Sep 19 2016 Paul Howarth - 2.038-1 - Update to 2.038 - Restrict session ticket callback to Net::SSLeay 1.79+ since version before contains bug; add test for session reuse - Extend SSL fingerprint to pubkey digest, i.e. 'sha1$pub$xxxxxx....' - Fix t/external/ocsp.t to use different server (under my control) to check OCSP stapling - Update patches as needed * Tue Aug 23 2016 Paul Howarth - 2.037-1 - Update to 2.037 - Disable OCSP support when Net::SSLeay 1.75..1.77 is used (CPAN RT#116795) - Fix session cache del_session: it freed the session but did not properly remove it from the cache; further reuse caused crash - Update patches as needed * Thu Aug 11 2016 Paul Howarth - 2.035-1 - Update to 2.035 - Fixes for issues introduced in 2.034 - Return with error in configure_SSL if context creation failed; this might otherwise result in a segmentation fault later - Apply builtin defaults before any (user configurable) global settings (i.e. done with set_defaults, set_default_context...) so that builtins don't replace user settings - Update patches as needed * Mon Aug 8 2016 Paul Howarth - 2.034-1 - Update to 2.034 - Move handling of global SSL arguments into creation of context, so that these get also applied when creating a context only - Update patches as needed * Sat Jul 16 2016 Paul Howarth - 2.033-1 - Update to 2.033 - Support for session ticket reuse over multiple contexts and processes (if supported by Net::SSLeay) - Small optimizations, like saving various Net::SSLeay constants into variables and access variables instead of calling the constant sub all the time - Make t/dhe.t work with openssl 1.1.0 - Update patches as needed * Tue Jul 12 2016 Paul Howarth - 2.032-1 - Update to 2.032 - Set session id context only on the server side; even if the documentation for SSL_CTX_set_session_id_context makes clear that this function is server side only, it actually affects handling of session reuse on the client side too and can result in error "SSL3_GET_SERVER_HELLO:attempt to reuse session in different context" at the client * Fri Jul 8 2016 Paul Howarth - 2.031-1 - Update to 2.031 - Utils::CERT_create - don't add given extensions again if they were already added; Firefox croaks with sec_error_extension_value_invalid if (specific?) extensions are given twice - Assume that Net::SSLeay::P_PKCS12_load_file will return the CA certificates with the reverse order as in the PKCS12 file, because that's what it does - Support for creating ECC keys in Utils once supported by Net::SSLeay - Remove internal sub session_cache and access cache directly (faster) - Update patches as needed * Tue Jun 28 2016 Paul Howarth - 2.029-1 - Update to 2.029 - Add del_session method to session cache - Use SSL_session_key as the real key for the cache and not some derivate of it, so that it works to remove the entry using the same key - BR: perl-generators * Mon May 16 2016 Jitka Plesnikova - 2.027-2 - Perl 5.24 rebuild * Thu Apr 21 2016 Paul Howarth - 2.027-1 - Update to 2.027 - Updated Changes file for 2.026 * Wed Apr 20 2016 Paul Howarth - 2.026-1 - Update to 2.026 - Upstream's default cipher lists updated (we use system default though) - Update patches as needed * Mon Apr 4 2016 Paul Howarth - 2.025-1 - Update to 2.025 - Resolved memleak if SSL_crl_file was used (CPAN RT#113257, CPAN RT#113530) - Simplify find command using -delete * Sun Feb 7 2016 Paul Howarth - 2.024-1 - Update to 2.024 - Work around issue where the connect fails on systems having only a loopback interface and where IO::Socket::IP is used as super class (default when available) - Update patches as needed * Thu Feb 04 2016 Fedora Release Engineering - 2.023-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild * Sat Jan 30 2016 Paul Howarth - 2.023-1 - Update to 2.023 - OpenSSL 1.0.2f changed the behavior of SSL shutdown in case the TLS connection was not fully established, which somehow resulted in Net::SSLeay::shutdown returning 0 (i.e. keep trying) and hence an endless loop; it will now ignore this result in case the TLS connection was not yet established and consider the TLS connection closed instead - Update patches as needed * Thu Dec 10 2015 Paul Howarth - 2.022-1 - Update to 2.022 - Fix stringification of IPv6 inside subjectAltNames in Utils::CERT_asHash (CPAN RT#110253) * Thu Dec 3 2015 Paul Howarth - 2.021-1 - Update to 2.021 - Fixes for documentation and typos - Update PublicSuffix with latest version from publicsuffix.org - Update patches as needed * Mon Sep 21 2015 Paul Howarth - 2.020-1 - Update to 2.020 - Support multiple directories in SSL_ca_path (CPAN RT#106711); directories can be given as array or as string with a path separator - Typos fixed (https://github.com/noxxi/p5-io-socket-ssl/pull/34) - Update patches as needed * Tue Sep 1 2015 Paul Howarth - 2.019-1 - Update to 2.019 - Work around different behavior of getnameinfo from Socket and Socket6 by using a different wrapper depending on which module is used for IPv6 - Update patches as needed * Mon Aug 31 2015 Paul Howarth - 2.018-1 - Update to 2.018 - Checks for readability of files/dirs for certificates and CA no longer use -r because this is not safe when ACLs are used (CPAN RT#106295) - New method sock_certificate similar to peer_certificate (CPAN RT#105733) - get_fingerprint can now take optional certificate as argument and compute the fingerprint of it; useful in connection with sock_certificate - Check for both EWOULDBLOCK and EAGAIN since these codes are different on some platforms (CPAN RT#106573) - Enforce default verification scheme if nothing was specified, i.e. no longer just warn but accept; if really no verification is wanted, a scheme of 'none' must be explicitly specified - Support different cipher suites per SNI hosts - startssl.t failed on darwin with old openssl since server requested client certificate but offered also anon ciphers (CPAN RT#106687) - Update patches as needed * Thu Jun 18 2015 Fedora Release Engineering - 2.016-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild * Tue Jun 09 2015 Jitka Plesnikova - 2.016-2 - Perl 5.22 rebuild * Sun Jun 7 2015 Paul Howarth - 2.016-1 - Update to 2.016 - Add flag X509_V_FLAG_TRUSTED_FIRST by default if available in OpenSSL (since 1.02) and available with Net::SSLeay (CPAN RT#104759) - Work around hanging prompt() with older perl in Makefile.PL (CPAN RT#104731) - Make t/memleak_bad_handshake.t work on cygwin and other systems having /proc/pid/statm (CPAN RT#104659) - Add better debugging * Sat Jun 06 2015 Jitka Plesnikova - 2.015-2 - Perl 5.22 rebuild * Thu May 14 2015 Paul Howarth - 2.015-1 - Update to 2.015 - Work around problem with IO::Socket::INET6 on Windows, by explicitly using Domain AF_INET in the tests (CPAN RT#104226) * Tue May 5 2015 Paul Howarth - 2.014-1 - Update to 2.014 - Utils::CERT_create - work around problems with authorityInfoAccess, where OpenSSL i2v does not create the same string as v2i expects - Intercept - don't clone some specific extensions that only make sense with the original certificate * Fri May 1 2015 Paul Howarth - 2.013-1 - Update to 2.013 - Assign severities to internal error handling and make sure that follow-up errors like "configuration failed" or "certificate verify error" don't replace more specific "hostname verification failed" when reporting in sub errstr/$SSL_ERROR (CPAN RT#103423) - Enhanced documentation (https://github.com/noxxi/p5-io-socket-ssl/pull/26) * Mon Feb 2 2015 Paul Howarth - 2.012-1 - Update to 2.012 - Fix t/ocsp.t in case no HTTP::Tiny is installed * Sun Feb 1 2015 Paul Howarth - 2.011-1 - Update to 2.011 - Fix t/ocsp.t - don't count on revoked.grc.com using OCSP stapling (CPAN RT#101855) - Added option 'purpose' to Utils::CERT_create to get better control of the certificate's purpose; default is 'server,client' for non-CA (contrary to only 'server' before) - Removed RC4 from default cipher suites on the server side (https://github.com/noxxi/p5-io-socket-ssl/issues/22) - Refactoring of some tests using Test::More - Note that this package still uses system-default cipher and SSL versions, which may have RC4 enabled - Update patches as needed * Thu Jan 15 2015 Paul Howarth - 2.010-1 - Update to 2.010 - New options SSL_client_ca_file and SSL_client_ca to let the server send the list of acceptable CAs for the client certificate - t/protocol_version.t - fix in case SSLv3 is not supported in Net::SSLeay (CPAN RT#101485) * Mon Jan 12 2015 Paul Howarth - 2.009-1 - Update to 2.009 - Remove util/analyze.pl; this tool is now together with other SSL tools at https://github.com/noxxi/p5-ssl-tools - Added ALPN support (needs OpenSSL1.02, Net::SSLeay 1.56+) (CPAN RT#101452) * Thu Dec 18 2014 Paul Howarth - 2.008-1 - Update to 2.008 - Work around recent OCSP verification errors for revoked.grc.com (badly signed OCSP response, Firefox also complains about it) in test t/external/ocsp.t - util/analyze.pl - report more details about preferred cipher for specific TLS versions * Thu Nov 27 2014 Paul Howarth - 2.007-1 - Update to 2.007 - Make getline/readline fall back to super class if class is not sslified yet, i.e. behave the same as sysread, syswrite etc. (CPAN RT#100529) * Sun Nov 23 2014 Paul Howarth - 2.006-1 - Update to 2.006 - Make SSLv3 available even if the SSL library disables it by default in SSL_CTX_new (like done in LibreSSL); default will stay to disable SSLv3 so this will be only done when setting SSL_version explicitly - Fix possible segmentation fault when trying to use an invalid certificate - Use only the ICANN part of the default public suffix list and not the private domains; this makes existing exceptions for s3.amazonaws.com and googleapis.com obsolete - Fix t/protocol_version.t to deal with OpenSSL installations that are compiled without SSLv3 support - Make (hopefully) non-blocking work on windows by using EWOULDBLOCK instead of EAGAIN; while this is the same on UNIX it is different on Windows and socket operations return there (WSA)EWOULDBLOCK and not EAGAIN - Enable non-blocking tests on Windows too - Make PublicSuffix::_default_data thread safe - Update PublicSuffix with latest list from publicsuffix.org - Note that this package still uses system-default cipher and SSL versions, which may have SSL3.0 enabled - Classify buildreqs by usage * Wed Oct 22 2014 Paul Howarth - 2.002-1 - Update to 2.002 - Fix check for (invalid) IPv4 when validating hostname against certificate; do not use inet_aton any longer because it can cause DNS lookups for malformed IP (CPAN RT#99448) - Update PublicSuffix with latest version from publicsuffix.org - lots of new top level domains - Add exception to PublicSuffix for s3.amazonaws.com (CPAN RT#99702) * Tue Oct 21 2014 Paul Howarth - 2.001-1 - Update to 2.001 - Add SSL_OP_SINGLE_(DH|ECDH)_USE to default options to increase PFS security - Update external tests with currently expected fingerprints of hosts - Some fixes to make it still work on 5.8.1 * Thu Oct 16 2014 Paul Howarth - 2.000-1 - Update to 2.000 - Consider SSL3.0 as broken because of POODLE and disable it by default - Skip live tests without asking if environment NO_NETWORK_TESTING is set - Skip tests that require fork on non-default windows setups without proper fork (https://github.com/noxxi/p5-io-socket-ssl/pull/18) - Note that this package still uses system-default cipher and SSL versions, which may have SSL3.0 enabled * Fri Oct 10 2014 Paul Howarth - 1.999-1 - Update to 1.999 - Make sure we don't use version 0.30 of IO::Socket::IP - Make sure that PeerHost is checked in all places where PeerAddr is checked, because these are synonyms and IO::Socket::IP prefers PeerHost while others prefer PeerAddr; also accept PeerService additionally to PeerPort (https://github.com/noxxi/p5-io-socket-ssl/issues/16) - Add ability to use client certificates and to overwrite hostname with util/analyze-ssl.pl * Mon Sep 22 2014 Paul Howarth - 1.998-1 - Update to 1.998 - Make client authentication work at the server side when SNI is in by use having CA path and other settings in all SSL contexts instead of only the main one (https://github.com/noxxi/p5-io-socket-ssl/pull/15) * Thu Aug 28 2014 Jitka Plesnikova - 1.997-4 - Perl 5.20 rebuild * Thu Aug 7 2014 Paul Howarth - 1.997-3 - Use system-default SSL version too * Thu Aug 7 2014 Paul Howarth - 1.997-2 - Use system-wide default cipher list to support use of system-wide crypto policy (#1076390, #1127577, CPAN RT#97816) https://fedoraproject.org/wiki/Changes/CryptoPolicy * Mon Jul 14 2014 Paul Howarth - 1.997-1 - Update to 1.997 - Fix initialization and creation of OpenSSL-internals for perlcc compatibility (CPAN RT#95452) - Add refresh option for peer_certificate, so that it checks if the certificate changed in the mean time (on renegotiation) - Fix fingerprint checking - now applies only to top-most certificate - IO::Socket::SSL::Utils - accept extensions within CERT_create - Various documentation fixes * Mon Jun 23 2014 Paul Howarth - 1.994-1 - Update to 1.994 - IO::Socket::SSL can now be used as dual-use socket, e.g. start plain, upgrade to SSL and downgrade again all with the same object; see documentation of SSL_startHandshake and chapter Advanced Usage - Try to apply SSL_ca* even if verify_mode is 0, but don't complain if this fails; this is needed if one wants to explicitly verify OCSP lookups even if verification is otherwise off, because otherwise the signature check would fail (this is mostly useful for testing) - Reorder documentation of attributes for new, so that the more important ones are at the top * Sun Jun 15 2014 Paul Howarth - 1.993-1 - Update to 1.993 - Major rewrite of documentation, now in separate file - Rework error handling to distinguish between SSL errors and internal errors (like missing capabilities) - Fix handling of default_ca if given during the run of the program (Debian #750646) - util/analyze-ssl.pl - fix hostname check if SNI does not work * Tue Jun 10 2014 Paul Howarth - 1.992-1 - Update to 1.992 - Set $! to undef before doing IO (accept, read...); on Windows a connection reset could cause an SSL read error without setting $!, so make sure we don't keep the old value and maybe thus run into an endless loop * Sat Jun 07 2014 Fedora Release Engineering - 1.991-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild * Wed May 28 2014 Paul Howarth - 1.991-1 - Update to 1.991 - New option SSL_OCSP_TRY_STAPLE to enforce staple request even if VERIFY_NONE - Work around for CPAN RT#96013 in peer_certificates * Tue May 27 2014 Paul Howarth - 1.990-1 - Update to 1.990 - Added option SSL_ocsp_staple_callback to get the stapled OCSP response and verify it somewhere else - Try to fix warnings on Windows again (CPAN RT#95967) - Work around temporary OCSP error in t/external/ocsp.t * Sun May 25 2014 Paul Howarth - 1.989-1 - Update to 1.989 - Fix warnings on Windows (CPAN RT#95881) * Sat May 17 2014 Paul Howarth - 1.988-1 - Update to 1.988 - Allow IPv4 in common name, because browsers allow this too; only for scheme www/http though, not for rfc2818 (because RC2818 does not allow this; in default scheme IPv6 and IPv4 are allowed in CN) - Fix handling of public suffix; add exemption for *.googleapis.com wildcard, which should not be allowed according to public suffix list but actually is used - Add hostname verification test based on older test of chromium, but change some of the test expectations because we don't want to support IP as SAN DNS and because we enforce a public suffix list (and thus *.co.uk should not be allowed) - Fix t/verify_hostname_standalone.t on systems without usable IDNA or IPv6 (CPAN RT#95719) - Enable IPv6 support only if we have a usable inet_pton - Remove stale entries from MANIFEST - Add transparent support for DER and PKCS#12 files to specify cert and key, e.g. it will autodetect the format - If SSL_cert_file is PEM and no SSL_key_file is given it will check if the key is in SSL_cert_file too * Thu May 15 2014 Paul Howarth - 1.985-1 - Update to 1.985 - Make OCSP callback return 1 even if it was called on the server side because of bad setup of the socket; otherwise we get an endless calling of the OCSP callback - Consider an OCSP response that is not yet or no longer valid a soft error instead of a hard error - Fix skip in t/external/ocsp.t in case fingerprint does not match - Call EVP_PKEY_free not EVP_KEY_free in IO::Socket::SSL::Utils::KEY_free (CPAN RT#95633) - util/analyze.pl - with --show-chain check if chain with SNI is different from chain w/o SNI - Drop ExtUtils::MakeMaker version requirement * Wed May 14 2014 Paul Howarth - 1.984-2 - Fix typo in Utils.pm (#1097640, CPAN RT#95633) * Sat May 10 2014 Paul Howarth - 1.984-1 - Update to 1.984 - Added OCSP support: - Needs Net::SSLeay ≥ 1.59 - For usage see documentation of IO::Socket::SSL (examples and anything with OCSP in the name) - New tool util/analyze-ssl.pl, which is intended to help in debugging of SSL problems and to get information about capabilities of server; it works also as an example of how to use various features (like OCSP, SNI...) - Fix peer_certificates (returns leaf certificate only once on client side) - Added timeout for stop_SSL (either with Timeout or with the default timeout for IO::Socket) - Fix IO::Socket::SSL::Utils mapping between ASN1_TIME and time_t when local time is not GMT; use Net::SSLeay::ASN1_TIME_timet if available - Fix t/external/usable_ca.t for system with junk in CA files * Sun May 4 2014 Paul Howarth - 1.983-1 - Update to 1.983 - Fix public suffix handling: ajax.googleapis.com should be ok even if googleapis.com is in public suffix list (e.g. check one level less) (CPAN RT#95317) - usable_ca.t - update fingerprints after heartbleed attack - usable_ca.t - make sure we have usable CA for tested hosts in CA store * Thu Apr 24 2014 Paul Howarth - 1.982-1 - Update to 1.982 - Fix for using subroutine as argument to set_args_filter_hack * Tue Apr 8 2014 Paul Howarth - 1.981-1 - Update to 1.981 - Fix ecdhe test for openssl 1.0.1d (CPAN RT#95432) - Fix detection of openssl 1.0.1d (detected 1.0.1e instead) - New function can_ecdh in IO::Socket::SSL * Tue Apr 8 2014 Paul Howarth - 1.980-1 - Update to 1.980 - Disable elliptic curve support for openssl 1.0.1d on 64-bit (http://rt.openssl.org/Ticket/Display.html?id=2975) - Fix certificate fingerprint calculation - Add patch to skip elliptic curve test for openssl 1.0.1d on 64-bit - Add patch to fix openssl version test * Sun Apr 6 2014 Paul Howarth - 1.979-1 - Update to 1.979 - Hostname checking: - Configuration of 'leftmost' is renamed to 'full_label', but the old version is kept for compatibility reasons - Documentation of predefined schemes fixed to match reality * Fri Apr 4 2014 Paul Howarth - 1.978-1 - Update to 1.978 - Added public prefix checking to verification of wildcard certificates, e.g. accept *.foo.com but not *.co.uk; see documentation of SSL_verifycn_publicsuffix and IO::Socket::SSL::PublicSuffix - Fix publicsuffix for IDNA, more tests with various IDNA libs (CPAN RT#94424) - Reuse result of IDN lib detection from PublicSuffix.pm in SSL.pm - Add more checks to external/usable_ca.t; now it is enough that at least one of the hosts verifies against the built-in CA store - Add openssl and Net::SSLeay version to diagnostics in load test - Switch preferred IDN back-end from Net::LibIDN to URI::_idna as per upstream, falling back to Net::IDN::Encode on older distributions - Add fix from upstream git to support building with Test::More < 0.88 * Wed Apr 2 2014 Paul Howarth - 1.975-1 - Update to 1.975 - BEHAVIOR CHANGE: work around TEA misfeature on OS X built-in openssl, e.g. guarantee that only the explicitly-given CA or the openssl default CA will be used; this means that certificates inside the OS X keyring will no longer be used, because there is no way to control the use by openssl (e.g. certificate pinning etc.) - Make external tests run by default to make sure default CA works on all platforms; it skips automatically on network problems like timeouts or SSL interception, and can also use http(s)_proxy environment variables * Wed Apr 2 2014 Paul Howarth - 1.974-1 - Update to 1.974 - New function peer_certificates to get the whole certificate chain; needs Net::SSLeay ≥ 1.58 - Extended IO::Socket::Utils::CERT_asHash to provide way more information, like issuer information, cert and pubkey digests, all extensions, CRL distribution points and OCSP uri * Wed Mar 26 2014 Paul Howarth - 1.973-1 - Update to 1.973 - With SSL_ca, certificate handles can now be used in addition to SSL_ca_file and SSL_ca_path - No longer complain if SSL_ca_file and SSL_ca_path are both given; instead, add both as options to the CA store - Shortcut 'issuer' to give both issuer_cert and issuer_key in CERT_create * Sun Mar 23 2014 Paul Howarth - 1.972-1 - Update to 1.972 - Make sure t/external/usable_ca.t works also with older openssl without support for SNI (CPAN RT#94117) * Sat Mar 22 2014 Paul Howarth - 1.971-1 - Update to 1.971 - Try to use SSL_hostname for hostname verification if no SSL_verifycn_name is given; this way, hostname for SNI and verification can be specified in one step - New test program example/simulate_proxy.pl * Wed Mar 19 2014 Paul Howarth - 1.970-1 - Update to 1.970 - Make sure sub default_ca uses a local $_ and not a version of an outer scope that might be read-only (CPAN RT#93987) * Sun Mar 16 2014 Paul Howarth - 1.969-1 - Update to 1.969 - Fix set_defaults to match documentation regarding short names - New function set_args_filter_hack to make it possible to override bad SSL settings from other code at the last moment - Determine default_ca on module load (and not on first use in each thread) - Don't try default hostname verification if verify_mode 0 - Fix hostname verification when reusing context * Thu Mar 13 2014 Paul Howarth - 1.968-1 - Update to 1.968 - BEHAVIOR CHANGE: removed implicit defaults of certs/server-{cert,key}.pem for SSL_{cert,key}_file and ca/,certs/my-ca.pem for SSL_ca_file; these defaults were deprecated since 1.951 (July 2013) - Usable CA verification path on Windows etc.: - Do not use Net::SSLeay::CTX_set_default_verify_paths any longer to set system/build dependent default verification path, because there was no way to retrieve these default values and check if they contained usable CA - Instead, re-implement the same algorithm and export the results with public function default_ca() and make it possible to overwrite it - Also check for usable verification path during build; if no usable path is detected, require Mozilla::CA at build and try to use it at runtime * Fri Feb 7 2014 Paul Howarth - 1.967-1 - Update to 1.967 - Verify the hostname inside a certificate by default with a superset of common verification schemes instead of not verifying identity at all; for now it will only complain if name verification failed but in the future it will fail certificate verification, forcing you to set the expected SSL_verifycn_name if you want to accept the certificate - New option SSL_fingerprint and new methods get_fingerprint and get_fingerprint_bin; together they can be used to selectively accept specific certificates that would otherwise fail verification, like self-signed, outdated or from unknown CAs - Utils: - Default RSA key length 2048 - Digest algorithm to sign certificate in CERT_create can be given; defaults to SHA-256 - CERT_create can now issue non-CA self-signed certificate - CERT_create add some more useful constraints to certificate - Spelling fixes * Wed Jan 22 2014 Paul Howarth - 1.966-1 - Update to 1.966 - Fixed bug introduced in 1.964 - disabling TLSv1_2 no longer worked by specifying !TLSv12; only !TLSv1_2 worked - Fixed leak of session objects in SessionCache, if another session replaced an existing session (introduced in 1.965) * Fri Jan 17 2014 Paul Howarth - 1.965-1 - Update to 1.965 - New key SSL_session_key to influence how sessions are inserted and looked up in the client's session cache, which makes it possible to share sessions over different ip:host (as is required with some FTPS servers) - t/core.t - handle case where default loopback source is not 127.0.0.1, like in FreeBSD jails * Wed Jan 15 2014 Paul Howarth - 1.964-1 - Update to 1.964 - Disabling TLSv1_1 did not work, because the constant was wrong; now it gets the constants from calling Net::SSLeay::SSL_OP_NO_TLSv1_1 etc. - The new syntax for the protocols is TLSv1_1 instead of TLSv11, which matches the syntax from OpenSSL (the old syntax continues to work in SSL_version) - New functions get_sslversion and get_sslversion_int, which get the SSL version of the established session as string or int - Disable t/io-socket-inet6.t if Acme::Override::INET is installed * Tue Jan 14 2014 Paul Howarth - 1.963-1 - Update to 1.963 - Fix behavior of stop_SSL: for blocking sockets it now enough to call it once, for non-blocking it should be called again as long as EAGAIN and SSL_ERROR is set to SSL_WANT_(READ|WRITE) - Don't call blocking if start_SSL failed and downgraded socket has no blocking method - Documentation enhancements: - Special section for differences to IO::Socket - Describe problem with blocking accept on non-blocking socket - Describe arguments to new_from_fd and make clear that for upgrading an existing IO::Socket, start_SSL should be used directly * Thu Nov 28 2013 Paul Howarth - 1.962-1 - Update to 1.962 - Work around problems with older F5 BIG-IP by offering fewer ciphers on the client side by default, so that the client hello stays below 255 bytes * Tue Nov 26 2013 Paul Howarth - 1.961-1 - Update to 1.961 - IO::Socket::SSL::Utils::CERT_create can now create CA-certificates that are not self-signed (by giving issuer_*) * Wed Nov 13 2013 Paul Howarth - 1.960-1 - Update to 1.960 - Only documentation enhancements: - Clarify with text and example code, that within event loops not only select/poll should be used, but also pending has to be called - Better introduction into SSL; at least mention anonymous authentication as something you don't want and should take care with the right cipher - Make it more clear that it's better not to change the cipher list unless you really know what you're doing - Adopt upstream's versioning scheme * Tue Nov 12 2013 Paul Howarth - 1.95.9-1 - Update to 1.959 - Fix test t/core.t for Windows * Mon Nov 11 2013 Paul Howarth - 1.95.8-1 - Update to 1.958 Lots of behavior changes for more secure defaults: - BEHAVIOR CHANGE: make default cipher list more secure, especially: - No longer support MD5 by default (broken) - No longer support anonymous authentication by default (vulnerable to man in the middle attacks) - Prefer ECDHE/DHE ciphers and add necessary ECDH curve and DH keys, so that it uses by default forward secrecy, if underlying Net::SSLeay/openssl supports it - Move RC4 to the end, i.e. 3DES is preferred (BEAST attack should hopefully have been fixed and now RC4 is considered less safe than 3DES) - Default SSL_honor_cipher_order to 1, e.g. when used as server it tries to get the best cipher even if the client prefers other ciphers; PLEASE NOTE that this might break connections with older, less secure implementations, in which case revert to 'ALL:!LOW:!EXP:!aNULL' or so - BEHAVIOR CHANGE: SSL_cipher_list now gets set on context, not SSL object, and thus gets reused if context gets reused; PLEASE NOTE that using SSL_cipher_list together with SSL_reuse_ctx no longer has any effect on the ciphers of the context - Rework hostname verification schemes: - Add RFC names as scheme (e.g. 'rfc2818', ...) - Add SIP, SNMP, syslog, netconf, GIST - BEHAVIOR CHANGE: fix SMTP - now accept wildcards in CN and subjectAltName - BEHAVIOR CHANGE: fix IMAP, POP3, ACAP, NNTP - now accept wildcards in CN - BEHAVIOR CHANGE: anywhere wildcards like www* now match only 'www1', 'www2' etc. but not 'www' - Anywhere wildcards like x* are no longer applied to IDNA names (which start with 'xn--') - Fix crash of Utils::CERT_free - Support TLSv11, TLSv12 as handshake protocols - Fixed t/core.t: test used cipher_list of HIGH, which includes anonymous authorization; with the DH param given by default since 1.956, old versions of openssl (like 0.9.8k) used cipher ADH-AES256-SHA (e.g. anonymous authorization) instead of AES256-SHA and thus the check for the peer certificate failed (because ADH does not exchange certificates) - fixed by explicitly specifying HIGH:!aNULL as cipher (CPAN RT#90221) - Cleaned up tests: - Remove ssl_settings.req and 02settings.t, because all tests now create a simple socket at 127.0.0.1 and thus global settings are no longer needed - Some tests did not have use strict(!); fixed it - Removed special handling for older Net::SSLeay versions that are less than our minimum requirement - Some syntax enhancements: removed some SSL_version and SSL_cipher_list options where they were not really needed - Cleanup: remove workaround for old IO::Socket::INET6 but instead require at least version 2.55 which is now 5 years old - Fix t/session.t to work with older openssl versions (CPAN RT#90240) * Fri Oct 11 2013 Paul Howarth - 1.95.5-1 - Update to 1.955 - Support for perfect forward secrecy using ECDH, if the Net::SSLeay version supports it * Sun Sep 15 2013 Paul Howarth - 1.95.4-1 - Update to 1.954 - Accept older versions of ExtUtils::MakeMaker and add meta information like link to repository only for newer versions * Sat Aug 03 2013 Fedora Release Engineering - 1.95.3-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild * Mon Jul 22 2013 Petr Pisar - 1.95.3-2 - Perl 5.18 rebuild * Mon Jul 22 2013 Paul Howarth - 1.95.3-1 - Update to 1.953 - Precedence fixes for IO::Socket::SSL::Utils (CPAN RT#87052) * Fri Jul 12 2013 Paul Howarth - 1.95.2-1 - Update to 1.952 - Fix t/acceptSSL-timeout.t on Win32 (CPAN RT#86862) * Wed Jul 3 2013 Paul Howarth - 1.95.1-1 - Update to 1.951 (1.950) - MAJOR BEHAVIOR CHANGE: - ssl_verify_mode now defaults to verify_peer for client - Previously it used verify_none, but loudly complained since 1.79 about it - It will not complain any longer, but the connection will probably fail - Please don't simply disable ssl verification; instead, set SSL_ca_file etc. so that verification succeeds! - MAJOR BEHAVIOR CHANGE: - It will now complain if the built-in defaults of certs/my-ca.pem or ca/ for CA and certs/{server,client}-{key,cert}.pem for cert and key are used, i.e. no certificates are specified explicitly - In the future these insecure (relative path!) defaults will be removed and the CA replaced with the system defaults (1.951) - Use Net::SSLeay::SSL_CTX_set_default_verify_paths to use openssl's built-in defaults for CA unless CA path/file was given (or IO::Socket::SSL built-ins used) * Sat Jun 1 2013 Paul Howarth - 1.94-1 - Update to 1.94 - Makefile.PL reported wrong version of openssl if Net::SSLeay was not installed, instead of reporting a missing dependency of Net::SSLeay * Fri May 31 2013 Paul Howarth - 1.93-1 - Update to 1.93 - Need at least OpenSSL version 0.9.8 now, since last 0.9.7 was released 6 years ago; remove code to work around older releases - Changed AUTHOR in Makefile.PL from array back to string, because the array feature is not available in MakeMaker shipped with 5.8.9 (CPAN RT#85739) - Set openssl version requirement to 0.9.8 - Drop ExtUtils::MakeMaker version requirement back to 6.46 * Thu May 30 2013 Paul Howarth - 1.92-1 - Update to 1.92 - Intercept: use sha1-fingerprint of original cert for id into cache unless otherwise given - Fix pod error in IO::Socket::SSL::Utils (CPAN RT#85733) * Thu May 30 2013 Paul Howarth - 1.91-1 - Update to 1.91 - Added IO::Socket::SSL::Utils for easier manipulation of certificates and keys - Moved SSL interception into IO::Socket::SSL::Intercept and simplified it using IO::Socket::SSL::Utils - Enhance meta information in Makefile.PL - Bump openssl version requirement to 0.9.8a - Need at least version 6.58 of ExtUtils::MakeMaker (CPAN RT#85739) * Wed May 29 2013 Paul Howarth - 1.90-1 - Update to 1.90 - Support more digests, especially SHA-2 (CPAN RT#85290) - Added support for easy SSL interception (man in the middle) based on ideas found in mojo-mitm proxy - Make 1.46 the minimal required version for Net::SSLeay, because it introduced lots of useful functions - BR:/R: openssl ≥ 0.9.7e for P_ASN1_TIME_(get,set)_isotime in Net::SSLeay * Tue May 14 2013 Paul Howarth - 1.89-1 - Update to 1.89 - If IO::Socket::IP is used it should be at least version 0.20; otherwise we get problems with HTTP::Daemon::SSL and maybe others (CPAN RT#81932) - Spelling corrections * Thu May 2 2013 Paul Howarth - 1.88-1 - Update to 1.88 - Consider a value of '' the same as undef for SSL_ca_(path|file), SSL_key* and SSL_cert* - some apps like Net::LDAP use it that way * Wed Apr 24 2013 Paul Howarth - 1.87-1 - Update to 1.87 - Complain if given SSL_(key|cert|ca)_(file|path) do not exist or if they are not readable (CPAN RT#84829) - Fix use of SSL_key|SSL_file objects instead of files, broken with 1.83 * Wed Apr 17 2013 Paul Howarth - 1.86-1 - Update to 1.86 - Don't warn about SSL_verify_mode when re-using an existing SSL context (CPAN RT#84686) * Mon Apr 15 2013 Paul Howarth - 1.85-1 - Update to 1.85 - Probe for available modules with local __DIE__ and __WARN__handlers (CPAN RT#84574) - Fix warning, when IO::Socket::IP is installed and inet6 support gets explicitly requested (CPAN RT#84619) * Sat Feb 16 2013 Paul Howarth - 1.84-1 - Update to 1.84 - Disabled client side SNI for openssl version < 1.0.0 because of CPAN RT#83289 - Added functions can_client_sni, can_server_sni and can_npn to check availability of SNI and NPN features - Added more documentation for SNI and NPN * Thu Feb 14 2013 Paul Howarth - 1.83-2 - Update to 1.831 - Separated documentation of non-blocking I/O from error handling - Changed and documented behavior of readline to return the read data on EAGAIN/EWOULDBLOCK in case of non-blocking socket (see https://github.com/noxxi/p5-io-socket-ssl/issues/1) - Bumped release rather than version number to preserve likely upgrade path and avoid need for epoch or version number ugliness; may revisit this in light of upstream's future version numbering decisions * Mon Feb 4 2013 Paul Howarth - 1.83-1 - Update to 1.83 - Server Name Indication (SNI) support on the server side (CPAN RT#82761) - Reworked part of the documentation, like providing better examples * Mon Jan 28 2013 Paul Howarth - 1.82-1 - Update to 1.82 - sub error sets $SSL_ERROR etc. only if there really is an error; otherwise it will keep the latest error, which allows IO::Socket::SSL->new to report the correct problem, even if the problem is deeper in the code (like in connect) - Correct spelling (CPAN RT#82790) * Thu Dec 6 2012 Paul Howarth - 1.81-1 - Update to 1.81 - Deprecated set_ctx_defaults; new name is set_defaults (the old name is still available) - Changed handling of default path for SSL_(ca|cert|key)* keys: if one of these keys is user defined, don't add defaults for the others, i.e. don't mix user settings and defaults - Cleaner handling of module defaults vs. global settings vs. socket specific settings; global and socket specific settings are both provided by the user, while module defaults are not - Make IO::Socket::INET6 and IO::Socket::IP specific tests both run, even if both modules are installed, by faking a failed load of the other module - BR: perl(IO::Socket::INET6) and perl(Socket6) unconditionally * Fri Nov 30 2012 Paul Howarth - 1.80-1 - Update to 1.80 - Removed some warnings in test (missing SSL_verify_mode => 0), which caused tests to hang on Windows (CPAN RT#81493) * Sun Nov 25 2012 Paul Howarth - 1.79-1 - Update to 1.79 - Use getnameinfo instead of unpack_sockaddr_in6 to get PeerAddr and PeerPort from sockaddr in _update_peer, because this provides scope too - Work around systems that don't define AF_INET6 (CPAN RT#81216) - Prepare transition to a more secure default for SSL_verify_mode; the use of the current default SSL_VERIFY_NONE will cause a big warning for clients, unless SSL_verify_mode was explicitly set inside the application to this insecure value (in the near future the default will be SSL_VERIFY_PEER, and thus causing verification failures in unchanged applications) * Thu Nov 15 2012 Petr Šabata - 1.77-2 - Added some missing build dependencies * Fri Oct 5 2012 Paul Howarth - 1.77-1 - Update to 1.77 - support _update_peer for IPv6 too (CPAN RT#79916) * Fri Jul 20 2012 Fedora Release Engineering - 1.76-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild * Thu Jun 28 2012 Petr Pisar - 1.76-2 - Perl 5.16 rebuild * Mon Jun 18 2012 Paul Howarth - 1.76-1 - Update to 1.76 - add support for IO::Socket::IP, which supports inet6 and inet4 (CPAN RT#75218) - fix documentation errors (CPAN RT#77690) - made it possible to explicitly disable TLSv11 and TLSv12 in SSL_version - use inet_pton from either Socket.pm 1.95 or Socket6.pm - Use IO::Socket::IP for IPv6 support where available, else IO::Socket::INET6 - Add runtime dependency for appropriate IPv6 support module so that we can ensure that we run at runtime what we tested with at build time * Thu Jun 14 2012 Petr Pisar - 1.74-2 - Perl 5.16 rebuild * Mon May 14 2012 Paul Howarth - 1.74-1 - Update to 1.74 - accept a version of SSLv2/3 as SSLv23, because older documentation could be interpreted like this * Fri May 11 2012 Paul Howarth - 1.73-1 - Update to 1.73 - set DEFAULT_CIPHER_LIST to ALL:!LOW instead of HIGH:!LOW - make test t/dhe.t hopefully work with more versions of openssl * Wed May 9 2012 Paul Howarth - 1.71-1 - Update to 1.71 - 1.70 done right: don't disable SSLv2 ciphers; SSLv2 support is better disabled by the default SSL_version of 'SSLv23:!SSLv2' * Tue May 8 2012 Paul Howarth - 1.70-1 - Update to 1.70 - make it possible to disable protocols using SSL_version, and make SSL_version default to 'SSLv23:!SSLv2' * Tue May 8 2012 Paul Howarth - 1.69-1 - Update to 1.69 (changes for CPAN RT#76929) - if no explicit cipher list is given, default to ALL:!LOW instead of the openssl default, which usually includes weak ciphers like DES - new config key SSL_honor_cipher_order and document how to use it to fight BEAST attack - fix behavior for empty cipher list (use default) - re-added workaround in t/dhe.t * Mon Apr 16 2012 Paul Howarth - 1.66-1 - Update to 1.66 - make it thread safer (CPAN RT#76538) * Mon Apr 16 2012 Paul Howarth - 1.65-1 - Update to 1.65 - added NPN (Next Protocol Negotiation) support (CPAN RT#76223) * Sat Apr 7 2012 Paul Howarth - 1.64-1 - Update to 1.64 - ignore die from within eval to make tests more stable on Win32 (CPAN RT#76147) - clarify some behavior regarding hostname verification - Drop patch for t/dhe.t, no longer needed * Wed Mar 28 2012 Paul Howarth - 1.62-1 - Update to 1.62 - small fix to last version * Tue Mar 27 2012 Paul Howarth - 1.61-1 - Update to 1.61 - call CTX_set_session_id_context so that server's session caching works with client certificates too (CPAN RT#76053) * Tue Mar 20 2012 Paul Howarth - 1.60-1 - Update to 1.60 - don't make blocking readline if socket was set nonblocking, but return as soon no more data are available (CPAN RT#75910) - fix BUG section about threading so that it shows package as thread safe as long as Net::SSLeay ≥ 1.43 is used (CPAN RT#75749) - BR: perl(constant), perl(Exporter) and perl(IO::Socket) * Thu Mar 8 2012 Paul Howarth - 1.59-1 - Update to 1.59 - if SSLv2 is not supported by Net::SSLeay set SSL_ERROR with useful message when attempting to use it - modify constant declarations so that 5.6.1 should work again - Drop %%defattr, redundant since rpm 4.4 * Mon Feb 27 2012 Paul Howarth - 1.58-1 - Update to 1.58 - fix t/dhe.t for openssl 1.0.1 beta by forcing TLSv1, so that it does not complain about the too small RSA key, which it should not use anyway; this workaround is not applied for older openssl versions, where it would cause failures (CPAN RT#75165) - Add patch to fiddle the openssl version number in the t/dhe.t workaround because the OPENSSL_VERSION_NUMBER cannot be trusted in Fedora - One buildreq per line for readability - Drop redundant buildreq perl(Test::Simple) - Always run full test suite * Wed Feb 22 2012 Paul Howarth - 1.56-1 - Update to 1.56 - add automatic or explicit (via SSL_hostname) SNI support, needed for multiple SSL hostnames with the same IP (currently only supported for the client) - Use DESTDIR rather than PERL_INSTALL_ROOT - No need to delete empty directories from buildroot * Mon Feb 20 2012 Paul Howarth - 1.55-1 - Update to 1.55 - work around IO::Socket's work around for systems returning EISCONN etc. on connect retry for non-blocking sockets by clearing $! if SUPER::connect returned true (CPAN RT#75101) * Wed Jan 11 2012 Paul Howarth - 1.54-1 - Update to 1.54 - return 0 instead of undef in SSL_verify_callback to fix uninitialized warnings (CPAN RT#73629) * Mon Dec 12 2011 Paul Howarth - 1.53-1 - Update to 1.53 - kill child in t/memleak_bad_handshake.t if test fails (CPAN RT#73146) * Wed Dec 7 2011 Paul Howarth - 1.52-1 - Update to 1.52 - fix for t/nonblock.t hangs on AIX (CPAN RT#72305) - disable t/memleak_bad_handshake.t on AIX, because it might hang (CPAN RT#72170) - fix syntax error in t/memleak_bad_handshake.t * Fri Oct 28 2011 Paul Howarth - 1.49-1 - Update to 1.49 - another regression for readline fix: this time it failed to return lines at EOF that don't end with newline - extended t/readline.t to catch this case and the fix for 1.48 * Wed Oct 26 2011 Paul Howarth - 1.48-1 - Update to 1.48 - further fix for readline fix in 1.45: if the pending data were false (like '0'), it failed to read the rest of the line (CPAN RT#71953) * Fri Oct 21 2011 Paul Howarth - 1.47-1 - Update to 1.47 - fix for 1.46 - check for mswin32 needs to be /i * Tue Oct 18 2011 Paul Howarth - 1.46-1 - Update to 1.46 - skip signals test on Windows * Thu Oct 13 2011 Paul Howarth - 1.45-1 - Update to 1.45 - fix readline to continue when getting interrupt waiting for more data - BR: perl(Carp) * Tue Jul 19 2011 Petr Sabata - 1.44-2 - Perl mass rebuild * Fri May 27 2011 Paul Howarth - 1.44-1 - Update to 1.44 - fix invalid call to inet_pton in verify_hostname_of_cert when identity should be verified as ipv6 address because it contains a colon * Wed May 11 2011 Paul Howarth - 1.43-1 - Update to 1.43 - add SSL_create_ctx_callback to have a way to adjust context on creation (CPAN RT#67799) - describe problem of fake memory leak because of big session cache and how to fix it (CPAN RT#68073) - fix t/nonblock.t - stability improvements for t/inet6.t * Tue May 10 2011 Paul Howarth - 1.41-1 - Update to 1.41 - fix issue in stop_SSL where it did not issue a shutdown of the SSL connection if it first received the shutdown from the other side - try to make t/nonblock.t more reliable, at least report the real cause of SSL connection errors - No longer need to re-code docs to UTF-8 * Mon May 2 2011 Paul Howarth - 1.40-1 - Update to 1.40 - fix in example/async_https_server - get IDN support from URI (CPAN RT#67676) - Nobody else likes macros for commands * Thu Mar 3 2011 Paul Howarth - 1.39-1 - Update to 1.39 - fixed documentation of http verification: wildcards in cn is allowed * Tue Feb 08 2011 Fedora Release Engineering - 1.38-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild * Tue Jan 18 2011 Paul Howarth - 1.38-1 - Update to 1.38 - fixed wildcards_in_cn setting for http, wrongly set in 1.34 to 1 instead of anywhere (CPAN RT#64864) * Fri Dec 10 2010 Paul Howarth - 1.37-1 - Update to 1.37 - don't complain about invalid certificate locations if user explicitly set SSL_ca_path and SSL_ca_file to undef: assume that user knows what they are doing and will work around the problems themselves (CPAN RT#63741) * Thu Dec 9 2010 Paul Howarth - 1.36-1 - Update to 1.36 - update documentation for SSL_verify_callback based on CPAN RT#63743 and CPAN RT#63740 * Mon Dec 6 2010 Paul Howarth - 1.35-1 - Update to 1.35 (addresses CVE-2010-4334) - if verify_mode is not VERIFY_NONE and the ca_file/ca_path cannot be verified as valid, it will no longer fall back to VERIFY_NONE but throw an error (http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=606058) * Tue Nov 2 2010 Paul Howarth - 1.34-1 - Update to 1.34 - schema http for certificate verification changed to wildcards_in_cn=1 - if upgrading socket from inet to ssl fails due to handshake problems, the socket gets downgraded back again but is still open (CPAN RT#61466) - deprecate kill_socket: just use close() * Sun May 02 2010 Marcela Maslanova - 1.33-2 - Mass rebuild with perl-5.12.0 * Wed Mar 17 2010 Paul Howarth - 1.33-1 - Update to 1.33 - attempt to make t/memleak_bad_handshake.t more stable - fix hostname checking: only check an IP against subjectAltName GEN_IPADD * Tue Feb 23 2010 Paul Howarth - 1.32-1 - Update to 1.32 (die in Makefile.PL if Scalar::Util has no dualvar support) - Use %%{_fixperms} macro instead of our own %%{__chmod} incantation * Mon Dec 7 2009 Stepan Kasal - 1.31-2 - Rebuild against perl 5.10.1 * Sun Sep 27 2009 Paul Howarth - 1.31-1 - Update to 1.31 (see Changes for details) * Thu Aug 20 2009 Paul Howarth - 1.30-1 - Update to 1.30 (fix memleak when SSL handshake failed) - Add buildreq procps needed for memleak test * Mon Jul 27 2009 Paul Howarth - 1.27-1 - Update to 1.27 - various regex fixes for i18n and service names - fix warnings from perl -w (CPAN RT#48131) - improve handling of errors from Net::ssl_write_all * Sat Jul 25 2009 Fedora Release Engineering - 1.26-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild * Sat Jul 4 2009 Paul Howarth - 1.26-1 - Update to 1.26 (verify_hostname_of_cert matched only the prefix for the hostname when no wildcard was given, e.g. www.example.org matched against a certificate with name www.exam in it [#509819]) * Fri Jul 3 2009 Paul Howarth - 1.25-1 - Update to 1.25 (fix t/nonblock.t for OS X 10.5 - CPAN RT#47240) * Thu Apr 2 2009 Paul Howarth - 1.24-1 - Update to 1.24 (add verify hostname scheme ftp, same as http) * Wed Feb 25 2009 Paul Howarth - 1.23-1 - Update to 1.23 (complain when no certificates are provided) * Sat Jan 24 2009 Paul Howarth - 1.22-1 - Update to latest upstream version: 1.22 * Thu Jan 22 2009 Paul Howarth - 1.20-1 - Update to latest upstream version: 1.20 * Tue Nov 18 2008 Paul Howarth - 1.18-1 - Update to latest upstream version: 1.18 - BR: perl(IO::Socket::INET6) for extra test coverage * Mon Oct 13 2008 Paul Howarth - 1.17-1 - Update to latest upstream version: 1.17 * Mon Sep 22 2008 Paul Howarth - 1.16-1 - Update to latest upstream version: 1.16 * Sat Aug 30 2008 Paul Howarth - 1.15-1 - Update to latest upstream version: 1.15 - Add buildreq and req for perl(Net::LibIDN) to avoid croaking when trying to verify an international name against a certificate * Wed Jul 16 2008 Paul Howarth - 1.14-1 - Update to latest upstream version: 1.14 - BuildRequire perl(Net::SSLeay) >= 1.21 * Wed Feb 27 2008 Tom "spot" Callaway - 1.12-4 - Rebuild for perl 5.10 (again) * Thu Jan 31 2008 Tom "spot" Callaway - 1.12-3 - Rebuild for new perl * Wed Nov 28 2007 Paul Howarth - 1.12-2 - Cosmetic spec changes suiting new maintainer's preferences * Fri Oct 26 2007 Robin Norwood - 1.12-1 - Update to latest upstream version: 1.12 - Fix license tag - Add BuildRequires for ExtUtils::MakeMaker and Test::Simple - Fix package review issues: - Source URL - Resolves: bz#226264 * Tue Oct 16 2007 Tom "spot" Callaway - 1.02-1.1 - Correct license tag - Add BR: perl(ExtUtils::MakeMaker) * Sat Dec 02 2006 Robin Norwood - 1.02-1 - Upgrade to latest CPAN version: 1.02 * Mon Sep 18 2006 Warren Togami - 1.01-1 - 1.01 bug fixes (#206782) * Sun Aug 13 2006 Warren Togami - 0.998-1 - 0.998 with more important fixes * Tue Aug 01 2006 Warren Togami - 0.994-1 - 0.994 important bugfixes (#200860) * Tue Jul 18 2006 Warren Togami - 0.991-1 - 0.991 * Wed Jul 12 2006 Warren Togami - 0.97-3 - Import into FC6 * Tue Feb 28 2006 Jose Pedro Oliveira - 0.97-2 - Rebuild for FC5 (perl 5.8.8). - Rebuild switch: "--with sessiontests". * Mon Jul 18 2005 Ville Skyttä - 0.97-1 - 0.97. - Convert docs to UTF-8, drop some unuseful ones. * Wed Apr 6 2005 Michael Schwendt - 0.96-4 - Rebuilt * Tue Oct 12 2004 Ville Skyttä - 0:0.96-3 - Disable session test suite even if Net::SSLeay >= 1.26 is available. * Wed Jul 7 2004 Ville Skyttä - 0:0.96-0.fdr.2 - Bring up to date with current fedora.us Perl spec template. - Include examples in docs. * Sat May 1 2004 Ville Skyttä - 0:0.96-0.fdr.1 - Update to 0.96. - Reduce directory ownership bloat. - Require perl(:MODULE_COMPAT_*). * Fri Oct 17 2003 Ville Skyttä - 0:0.95-0.fdr.1 - First build.