%global basever 7.3 %global micro 11 #global pre ... %global pyversion 3.9 Name: pypy%{pyversion} Version: %{basever}.%{micro}%{?pre:~%{pre}} %global version_ %{basever}.%{micro}%{?pre} # The Python version is included in Release to workaround debuginfo conflicts # and make pypy versions with otherwise the same version-release always sorted # by Python version as well. # This potentially allows tags like Obsoletes: pypy3 < %%{version}-%%{release}. # https://bugzilla.redhat.com/2053880 %global baserelease 2 Release: %{baserelease}.%{pyversion}%{?dist} Summary: Python %{pyversion} implementation with a Just-In-Time compiler # PyPy is MIT # Python standard library is Python # pypy/module/unicodedata is UCD # Bundled cffi is is MIT # Bundled pycparser is is BSD # Bundled pycparser.ply is BSD # Bundled bits from cryptography are ASL 2.0 or BSD # Bundled hpy is MIT # LGPL and another free license we'd need to ask spot about are present in some # java jars that we're not building with atm (in fact, we're deleting them # before building). If we restore those we'll have to work out the new # licensing terms License: MIT and Python and UCD and BSD and (ASL 2.0 or BSD) URL: http://pypy.org/ # https://fedoraproject.org/wiki/Changes/EncourageI686LeafRemoval %if 0%{?fedora} >= 37 || 0%{?rhel} >= 10 ExcludeArch: %{ix86} %endif # High-level configuration of the build: # libmpdec (mpdecimal package in Fedora) is tightly coupled with the # decimal module. We keep it bundled as to avoid incompatibilities # with the packaged version. # The version information can be found at lib_pypy/_libmpdec/mpdecimal.h # defined as MPD_VERSION. # See https://foss.heptapod.net/pypy/pypy/-/issues/3024 # With PyPy 7.3.4, the decimal module is not compiled #%%global libmpdec_version 2.4.1 # Whether to use RPM build wheels from the python-{pip,setuptools}-wheel package # Uses upstream bundled prebuilt wheels otherwise %bcond_without rpmwheels # We will build a "pypy" binary. # # Unfortunately, the JIT support is only available on some architectures. # We will only build with JIT support on those architectures, and build without # it on the other archs. The resulting binary will typically be slower than # CPython for the latter case. %ifarch %{ix86} x86_64 %{arm} %{power64} s390x aarch64 %bcond_without jit %else %bcond_with jit %endif # Should we build the emacs JIT-viewing mode? %bcond_without emacs # Easy way to turn off the selftests: %bcond_without selftests # We refer to this subdir of the source tree in a few places during the build: %global goal_dir pypy/goal %if 0%{?fedora} >= 36 # REMINDER: When updating the main pypy3 version for a certain Fedora release # make sure to update the python-classroom group in https://pagure.io/fedora-comps/ # 1. locate comps-fXX.xml.in for each affected Fedora release # 2. inside the python-classroom group locate pypy3.N-devel # 3. change the package name to match the new version # 4. submit changes as a pull request and make sure somebody merges it %bcond_without main_pypy3 %else %bcond_with main_pypy3 %endif %ifarch %{ix86} x86_64 %{arm} %global _package_note_linker gold %endif # Source and patches: Source0: https://downloads.python.org/pypy/pypy%{pyversion}-v%{version_}-src.tar.bz2 # Supply various useful RPM macros for building python modules against pypy: # __pypy, pypy_sitelib, pypy_sitearch Source2: macros.pypy3 # By default, if built at a tty, the translation process renders a Mandelbrot # set to indicate progress. # This obscures useful messages, and may waste CPU cycles, so suppress it, and # merely render dots: Patch1: 001-nevertty.patch # Patch pypy.translator.platform so that stdout from "make" etc gets logged, # rather than just stderr, so that the command-line invocations of the compiler # and linker are captured: Patch6: 006-always-log-stdout.patch # Disable the printing of a quote from IRC on startup (these are stored in # ROT13 form in lib_pypy/_pypy_irc_topic.py). Some are cute, but some could # cause confusion for end-users (and many are in-jokes within the PyPy # community that won't make sense outside of it). [Sorry to be a killjoy] Patch7: 007-remove-startup-message.patch # Glibc's libcrypt was replaced with libxcrypt in f28, crypt.h header has # to be added to privent compilation error. # https://fedoraproject.org/wiki/Changes/Replace_glibc_libcrypt_with_libxcrypt Patch9: 009-add-libxcrypt-support.patch # Instead of bundled wheels, use our RPM packaged wheels from # /usr/share/python-wheels # We conditionally apply this, but we use autosetup, so we use Source here Source189: 189-use-rpm-wheels.patch # Build-time requirements: # pypy's can be rebuilt using pypy2, rather than with CPython 2; doing so # halves the build time. # # Turn it off with this bcond, to revert back to rebuilding using CPython # and avoid a cycle in the build-time dependency graph: # Note, pypy3 is built with pypy2, so no dependency cycle %bcond_without build_using_pypy2 %if %{with build_using_pypy2} BuildRequires: pypy2 %global bootstrap_python_interp pypy2 %else # exception to use Python 2: https://pagure.io/fesco/issue/2130 BuildRequires: python2.7 %global bootstrap_python_interp python2 %endif BuildRequires: gcc BuildRequires: libffi-devel BuildRequires: tcl-devel BuildRequires: tk-devel BuildRequires: sqlite-devel BuildRequires: zlib-devel BuildRequires: bzip2-devel BuildRequires: ncurses-devel BuildRequires: expat-devel BuildRequires: openssl-devel BuildRequires: gdbm-devel BuildRequires: xz-devel BuildRequires: python-rpm-macros %ifarch %{valgrind_arches} BuildRequires: valgrind-devel %endif # For recording stats: BuildRequires: time BuildRequires: /usr/bin/free %if %{with selftests} # Used by the selftests, though not by the build: BuildRequires: gc-devel # For use in the selftests, for imposing a per-test timeout: BuildRequires: perl-interpreter %endif BuildRequires: /usr/bin/execstack BuildRequires: /usr/bin/patchelf # For byte-compiling the JIT-viewing mode: %if %{with emacs} BuildRequires: emacs %endif # For %%autosetup -S git BuildRequires: %{_bindir}/git %if %{with rpmwheels} BuildRequires: python-setuptools-wheel BuildRequires: python-pip-wheel %endif # Metadata for the core package (the JIT build): Requires: %{name}-libs%{?_isa} = %{version}-%{release} %if %{with main_pypy3} Provides: pypy3 = %{version}-%{release} Provides: pypy3%{?_isa} = %{version}-%{release} # This is when pypy3 package was replaced: Obsoletes: pypy3 < 7.3.4-4 # This is when pypy3 was provided by pypy3.8: Conflicts: pypy3 < %{version}-%{release} %if 0%{?fedora} >= 37 Obsoletes: pypy3.7 < 7.3.9-20 %endif %endif # This prevents ALL subpackages built from this spec to require # /usr/bin/pypy*. Granularity per subpackage is impossible. # It's intended for the libs package not to drag in the interpreter, see # https://bugzilla.redhat.com/show_bug.cgi?id=1547131 # https://bugzilla.redhat.com/show_bug.cgi?id=1862082 # All other packages require the main package explicitly. %global __requires_exclude ^/usr/bin/pypy %description PyPy's implementation of Python %{pyversion}, featuring a Just-In-Time compiler on some CPU architectures, and various optimized implementations of the standard types (strings, dictionaries, etc.). %if %{with jit} This build of PyPy has JIT-compilation enabled. %else This build of PyPy has JIT-compilation disabled, as it is not supported on this CPU architecture. %endif %package libs Summary: Run-time libraries used by PyPy implementations of Python %{pyversion} # We supply an emacs mode for the JIT viewer. # (This doesn't bring in all of emacs, just the directory structure) %if %{with emacs} Requires: emacs-filesystem >= %{_emacs_version} %endif %if %{with main_pypy3} Provides: pypy3-libs = %{version}-%{release} Provides: pypy3-libs%{?_isa} = %{version}-%{release} Obsoletes: pypy3-libs < 7.3.4-4 %if 0%{?fedora} >= 37 Obsoletes: pypy3.7-libs < 7.3.9-20 %endif %endif %if %{with rpmwheels} Requires: python-setuptools-wheel Requires: python-pip-wheel %else Provides: bundled(python3dist(pip)) = 22.0.4 Provides: bundled(python3dist(setuptools)) = 58.1.0 %endif # Provides for the bundled libmpdec %{?libmpdec_version: Provides: bundled(mpdecimal) = %{libmpdec_version} Provides: bundled(libmpdec) = %{libmpdec_version} } # Find the version in lib_pypy/cffi.dist-info/METADATA Provides: bundled(python3dist(cffi)) = 1.15.0 # Find the version in lib_pypy/cffi/_pycparser/__init__.py Provides: bundled(python3dist(pycparser)) = 2.21 # Find the version in lib_pypy/cffi/_pycparser/ply/__init__.py Provides: bundled(python3dist(ply)) = 3.9 # Find the version in lib_pypy/_cffi_ssl/cryptography/__about__.py Provides: bundled(python3dist(cryptography)) = 2.7 # Find the version in lib_pypy/hpy.dist-info/METADATA Provides: bundled(python3dist(hpy)) = 0.0.3 %description libs Libraries required by the various PyPy implementations of Python %{pyversion}. %package test Summary: Tests for PyPy%{pyversion} Requires: pypy%{pyversion}%{?_isa} = %{version}-%{release} Requires: pypy%{pyversion}-libs%{?_isa} = %{version}-%{release} %if %{with main_pypy3} Provides: pypy3-test = %{version}-%{release} Provides: pypy3-test%{?_isa} = %{version}-%{release} %if 0%{?fedora} >= 37 Obsoletes: pypy3.7-test < 7.3.9-20 %endif %endif %description test Various testing modules of PyPy%{pyversion}. Useful when you want to run the test suite of PyPy%{pyversion}. %package devel Summary: Development tools for working with PyPy%{pyversion} Requires: pypy%{pyversion}%{?_isa} = %{version}-%{release} Requires: pypy%{pyversion}-libs%{?_isa} = %{version}-%{release} %if %{with main_pypy3} Provides: pypy3-devel = %{version}-%{release} Provides: pypy3-devel%{?_isa} = %{version}-%{release} Obsoletes: pypy3-devel < 7.3.4-4 %if 0%{?fedora} >= 37 Obsoletes: pypy3.7-devel < 7.3.9-20 %endif %endif Supplements: tox %description devel Header files for building C extension modules against PyPy%{pyversion}. %prep %autosetup -n pypy%{pyversion}-v%{version_}-src -p1 -S git # Temporary workaround for https://bugzilla.redhat.com/show_bug.cgi?id=1954999 %{?!apply_patch:%define apply_patch(qp:m:) {%__apply_patch %**}} %if %{with rpmwheels} %apply_patch -m %(basename %{SOURCE189}) %{SOURCE189} rm lib-python/3/ensurepip/_bundled/*.whl %endif # Replace /usr/local/bin/python or /usr/bin/env python shebangs with /usr/bin/python2 or pypy2: find -name "*.py" -exec \ sed \ -i -r -e "s@/usr/(local/)?bin/(env )?python(2|3)?@/usr/bin/%{bootstrap_python_interp}@" \ "{}" \ \; for f in rpython/translator/goal/bpnn.py ; do # Detect shebang lines && remove them: sed -e '/^#!/Q 0' -e 'Q 1' $f \ && sed -i '1d' $f chmod a-x $f done # Replace all lib-python and lib_pypy python shebangs with pypy3 (those will be shipped with pypy3-libs) find lib-python/3 lib_pypy -name "*.py" -exec \ sed -r -i '1s@^#!\s*/usr/bin.*(python|pypy).*@#!/usr/bin/%{name}@' \ "{}" \ \; # Not needed on Linux rm lib-python/3/idlelib/idle.bat %ifarch %{ix86} x86_64 %{arm} sed -i -r 's/\$$LDFLAGSEXTRA$/& -fuse-ld=gold/' ./rpython/translator/platform/posix.py %endif %if %{without build_using_pypy2} # use the pycparser from PyPy even on CPython ln -s lib_pypy/cffi/_pycparser pycparser %endif # Remove windows executable binaries rm lib-python/3/distutils/command/*.exe %build # Top memory usage is about 4.5GB on arm7hf free BuildPyPy() { ExeName=$1 Options=$2 echo "--------------------------------------------------------------" echo "--------------------------------------------------------------" echo "--------------------------------------------------------------" echo "STARTING BUILD OF: $ExeName" echo "--------------------------------------------------------------" echo "--------------------------------------------------------------" echo "--------------------------------------------------------------" pushd %{goal_dir} # The build involves invoking a python script, passing in particular # arguments, environment variables, etc. # Some notes on those follow: # The generated binary embeds copies of the values of all environment # variables. We need to unset "RPM_BUILD_ROOT" to avoid a fatal error from # /usr/lib/rpm/check-buildroot # during the postprocessing of the rpmbuild, complaining about this # reference to the buildroot # By default, pypy's autogenerated C code is placed in # /tmp/usession-N # # and it appears that this stops rpm from extracting the source code to the # debuginfo package # # The logic in pypy-1.4/pypy/tool/udir.py indicates that it is generated in: # $PYPY_USESSION_DIR/usession-$PYPY_USESSION_BASENAME-N # and so we set PYPY_USESSION_DIR so that this tempdir is within the build # location, and set $PYPY_USESSION_BASENAME so that the tempdir is unique # for each invocation of BuildPyPy # Compilation flags for C code: # pypy-1.4/pypy/translator/c/genc.py:gen_makefile # assembles a Makefile within # THE_UDIR/testing_1/Makefile # calling out to platform.gen_makefile # For us, that's # pypy-1.4/pypy/translator/platform/linux.py: class BaseLinux(BasePosix): # which by default has: # CFLAGS = ['-O3', '-pthread', '-fomit-frame-pointer', # '-Wall', '-Wno-unused'] # plus all substrings from CFLAGS in the environment. # This is used to generate a value for CFLAGS that's written into the Makefile # How will we track garbage-collection roots in the generated code? # http://pypy.readthedocs.org/en/latest/config/translation.gcrootfinder.html export CFLAGS=$(echo "$RPM_OPT_FLAGS") # The generated C code leads to many thousands of warnings of the form: # warning: variable 'l_v26003' set but not used [-Wunused-but-set-variable] # Suppress them: export CFLAGS=$(echo "$CFLAGS" -Wno-unused -fPIC) # If we're already built the JIT-enabled "pypy", then use it for subsequent # builds (of other configurations): if test -x './pypy' ; then INTERP='./pypy' else # First pypy build within this rpm build? # Fall back to using the bootstrap python interpreter, which might be a # system copy of pypy from an earlier rpm, or be cpython's /usr/bin/python: INTERP='%{bootstrap_python_interp}' fi # Here's where we actually invoke the build: time \ RPM_BUILD_ROOT= \ PYPY_USESSION_DIR=$(pwd) \ PYPY_USESSION_BASENAME=$ExeName \ $INTERP ../../rpython/bin/rpython \ --gcrootfinder=shadowstack \ $Options \ targetpypystandalone \ --platlibdir=%{_lib} echo "--------------------------------------------------------------" echo "--------------------------------------------------------------" echo "--------------------------------------------------------------" echo "FINISHED BUILDING: $ExeName" echo "--------------------------------------------------------------" echo "--------------------------------------------------------------" echo "--------------------------------------------------------------" popd } BuildPyPy \ pypy3 \ %if %{with jit} "-Ojit" \ %else "-O2" \ %endif %{nil} %if %{with emacs} %{_emacs_bytecompile} rpython/jit/tool/pypytrace-mode.el %endif %install %global pypylibdir %{_libdir}/pypy%{pyversion} # First, run packaging script, it will prep the installation tree in builddir %global installation_archive_name pypy%{pyversion}-%{version_} %global packaging_builddir builddir %global packaged_prefix %{packaging_builddir}/%{installation_archive_name} # We will set an arbitrary downstream-only soname version, as it is required # See https://docs.fedoraproject.org/en-US/packaging-guidelines/#_downstream_so_name_versioning %global soname_version 0.1 %{bootstrap_python_interp} pypy/tool/release/package.py --archive-name '%{installation_archive_name}' --builddir '%{packaging_builddir}' --no-embedded-dependencies # Mangle some paths to match CPython, # see https://mail.python.org/pipermail/pypy-dev/2022-January/016310.html and the replies there # 1. remove the "python" executables, we still want CPython as the python command rm %{packaged_prefix}/bin/python* # 2. remove the "pypy" symbolic link, we still want pypy2 to be that for now rm %{packaged_prefix}/bin/pypy # 3. remove the "pypy3" symbolic link, if this is not the main pypy3 %{!?with_main_pypy3:rm %{packaged_prefix}/bin/pypy3} # 4. remove the .debug executbale and library rm %{packaged_prefix}/bin/*.debug # 5. move libpypy3.9-c.so to lib(64) and soname version it # https://docs.fedoraproject.org/en-US/packaging-guidelines/#_downstream_so_name_versioning mv %{packaged_prefix}/bin/libpypy%{pyversion}-c.so %{packaged_prefix}/%{_lib}/libpypy%{pyversion}-c.so.%{soname_version} ln -s libpypy%{pyversion}-c.so.%{soname_version} %{packaged_prefix}/%{_lib}/libpypy%{pyversion}-c.so patchelf --set-soname libpypy%{pyversion}-c.so.%{soname_version} %{packaged_prefix}/%{_lib}/libpypy%{pyversion}-c.so.%{soname_version} patchelf --replace-needed libpypy%{pyversion}-c.so libpypy%{pyversion}-c.so.%{soname_version} %{packaged_prefix}/bin/pypy%{pyversion} # 6. remove stray README rm %{packaged_prefix}/include/README # 7. copy the main LICENSE file to pypy's libdir, as does CPython cp -a LICENSE %{packaged_prefix}/%{_lib}/pypy%{pyversion} # 8. remove sources, we don't install them # this list was created by inspecting rpmlint output before it was added # sources that look like they might be tests are kept and included in the test subpackage rm -r %{packaged_prefix}/%{_lib}/pypy%{pyversion}/_blake2/impl rm -r %{packaged_prefix}/%{_lib}/pypy%{pyversion}/_libmpdec rm -r %{packaged_prefix}/%{_lib}/pypy%{pyversion}/_sha3/kcp rm -r %{packaged_prefix}/%{_lib}/pypy%{pyversion}/_cffi_ssl/_cffi_src/openssl/src rm %{packaged_prefix}/%{_lib}/pypy%{pyversion}/_pypy_*.c # Create the prefix and move stuff into it mkdir -p %{buildroot}%{_prefix} mv %{packaged_prefix}/bin %{buildroot}%{_bindir} mv %{packaged_prefix}/include %{buildroot}%{_includedir} mv %{packaged_prefix}/%{_lib} %{buildroot}%{_libdir} # Create directories we want to own install -d -m 0755 %{buildroot}%{pypylibdir}/site-packages/__pycache__ %if "%{_lib}" == "lib64" # The 64-bit version needs to create "site-packages" in /usr/lib/ (for # pure-Python modules) as well as in /usr/lib64/ (for packages with extension # modules). install -d -m 0755 %{buildroot}%{_prefix}/lib/pypy%{pyversion}/site-packages/__pycache__ %endif # Remove shebang lines from .py files that aren't executable, and # remove executability from .py files that don't have a shebang line: find \ %{buildroot} \ -name "*.py" \ $ \ \( \! -perm /u+x,g+x,o+x -exec sed -e '/^#!/Q 0' -e 'Q 1' {} \; \ -print -exec sed -i '1d' {} \; \ $ \ -o \ $ \ -perm /u+x,g+x,o+x ! -exec grep -m 1 -q '^#!' {} \; \ -exec chmod a-x {} \; \ $ \ \) # The generated machine code doesn't need an executable stack, but # one of the assembler files (gcmaptable.s) doesn't have the necessary # metadata to inform gcc of that, and thus gcc pessimistically assumes # that the built binary does need an executable stack. # # Reported upstream as: https://codespeak.net/issue/pypy-dev/issue610 # # I tried various approaches involving fixing the build, but the simplest # approach is to postprocess the ELF file: execstack --clear-execstack %{buildroot}%{_bindir}/pypy%{pyversion} # Bytecompile all of the .py files we ship, using our pypy binary, giving us # .pyc files for pypy. # # Note that some of the test files deliberately contain syntax errors, so # we are running it in subshell, to be able to ignore the failures and not to terminate the build. export LD_LIBRARY_PATH=%{buildroot}%{_libdir} (%{py_byte_compile %{buildroot}%{_bindir}/pypy%{pyversion} %{buildroot}}) || : %{buildroot}%{_bindir}/pypy%{pyversion} -c 'import _tkinter' %{buildroot}%{_bindir}/pypy%{pyversion} -c 'import tkinter' %{buildroot}%{_bindir}/pypy%{pyversion} -c 'import _sqlite3' %{buildroot}%{_bindir}/pypy%{pyversion} -c 'import _curses' %{buildroot}%{_bindir}/pypy%{pyversion} -c 'import curses' %{buildroot}%{_bindir}/pypy%{pyversion} -c 'import syslog' %{buildroot}%{_bindir}/pypy%{pyversion} -c 'from _sqlite3 import *' unset LD_LIBRARY_PATH # Capture the RPython source code files from the build within the debuginfo # package (rhbz#666975) %global pypy_debuginfo_dir /usr/src/debug/pypy%{pyversion}-%{version_}-src mkdir -p %{buildroot}%{pypy_debuginfo_dir} # copy over everything: cp -a pypy %{buildroot}%{pypy_debuginfo_dir} # ...then delete files that aren't: # - *.py files # - the Makefile # - typeids.txt # - dynamic-symbols-* find \ %{buildroot}%{pypy_debuginfo_dir} \ $ -type f \ -a \ \! \( -name "*.py" \ -o \ -name "Makefile" \ -o \ -name "typeids.txt" \ -o \ -name "dynamic-symbols-*" \ $ \ \) \ -delete # Alternatively, we could simply keep everything. This leads to a ~350MB # debuginfo package, but it makes it easy to hack on the Makefile and C build # flags by rebuilding/linking the sources. # To do so, remove the above "find" command. # We don't need bytecode for these files; they are being included for reference # purposes. # There are some rpmlint warnings from these files: # non-executable-script # wrong-script-interpreter # zero-length # script-without-shebang # dangling-symlink # but given that the objective is to preserve a copy of the source code, those # are acceptable. # Install the JIT trace mode for Emacs: %if %{with emacs} mkdir -p %{buildroot}/%{_emacs_sitelispdir} cp -a rpython/jit/tool/pypytrace-mode.el %{buildroot}/%{_emacs_sitelispdir}/pypy%{pyversion}trace-mode.el cp -a rpython/jit/tool/pypytrace-mode.elc %{buildroot}/%{_emacs_sitelispdir}/pypy%{pyversion}trace-mode.elc %endif %if %{with main_pypy3} # Install macros for rpm: install -m0644 -p -D -t %{buildroot}/%{_rpmconfigdir}/macros.d %{SOURCE2} %endif %check %{?libmpdec_version: # Verify that the bundled libmpdec version python was compiled with, is the same version we have virtual # provides for in the SPEC. test "$(%{goal_dir}/pypy%{pyversion}-c -c 'import decimal; print(decimal.__libmpdec_version__.decode("ascii"))')" = \ "%{libmpdec_version}" } topdir=$(pwd) SkipTest() { TEST_NAME=$1 sed -i -e"s|^$TEST_NAME$||g" testnames.txt } CheckPyPy() { # We'll be exercising one of the freshly-built binaries using the # test suite from the standard library (overridden in places by pypy's # modified version) ExeName=$1 echo "--------------------------------------------------------------" echo "--------------------------------------------------------------" echo "--------------------------------------------------------------" echo "STARTING TEST OF: $ExeName" echo "--------------------------------------------------------------" echo "--------------------------------------------------------------" echo "--------------------------------------------------------------" pushd %{goal_dir} # I'm seeing numerous cases where tests seem to hang, or fail unpredictably # So we'll run each test in its own process, with a timeout # Use regrtest to explicitly list all tests: ( ./$ExeName -c \ "from test.libregrtest.runtest import findtests; print('\n'.join(findtests()))" ) > testnames.txt # Skip some tests: # "audioop" doesn't exist for pypy yet: SkipTest test_audioop # The gdb CPython hooks haven't been ported to cpyext: SkipTest test_gdb # hotshot relies heavily on _hotshot, which doesn't exist: SkipTest test_hotshot # "strop" module doesn't exist for pypy yet: SkipTest test_strop # I'm seeing Koji builds hanging e.g.: # http://koji.fedoraproject.org/koji/getfile?taskID=3386821&name=build.log # The only test that seems to have timed out in that log is # test_multiprocessing, so skip it for now: SkipTest test_multiprocessing echo "== Test names ==" cat testnames.txt echo "=================" echo "" > failed-tests.txt for TestName in $(cat testnames.txt) ; do echo "===================" $TestName "====================" # Use /usr/bin/time (rather than the shell "time" builtin) to gather # info on the process (time/CPU/memory). This passes on the exit # status of the underlying command # # Use perl's alarm command to impose a timeout # 900 seconds is 15 minutes per test. # If a test hangs, that test should get terminated, allowing the build # to continue. # # Invoke pypy on test.regrtest to run the specific test suite # verbosely # # For now, || true, so that any failures don't halt the build: ( /usr/bin/time \ perl -e 'alarm shift @ARGV; exec @ARGV' 900 \ ./$ExeName -m test.regrtest -v $TestName ) \ || (echo $TestName >> failed-tests.txt) \ || true done echo "== Failed tests ==" cat failed-tests.txt echo "=================" popd # Doublecheck pypy's own test suite, using the built pypy binary: # Disabled for now: # x86_64 shows various failures inside: # jit/backend/x86/test # followed by a segfault inside # jit/backend/x86/test/test_runner.py # # i686 shows various failures inside: # jit/backend/x86/test # with the x86_64 failure leading to cancellation of the i686 build # Here's the disabled code: # pushd pypy # time translator/goal/$ExeName test_all.py # popd echo "--------------------------------------------------------------" echo "--------------------------------------------------------------" echo "--------------------------------------------------------------" echo "FINISHED TESTING: $ExeName" echo "--------------------------------------------------------------" echo "--------------------------------------------------------------" echo "--------------------------------------------------------------" } %if %{with selftests} CheckPyPy pypy%{pyversion}-c %endif # with selftests # Because there's a bunch of binary subpackages and creating # /usr/share/doc/pypy3-this and /usr/share/doc/pypy3-that # is just confusing for the user. %global _docdir_fmt %{name} %files %doc README.rst %{?with_main_pypy3:%{_bindir}/pypy3} %{_bindir}/pypy%{pyversion} %files libs %doc README.rst %license %{pypylibdir}/LICENSE %license %{pypylibdir}/_cffi_ssl/LICENSE %license %{pypylibdir}/cffi.dist-info/LICENSE %license %{pypylibdir}/cffi/_pycparser/ply/LICENSE %license %{pypylibdir}/hpy.dist-info/LICENSE %{pypylibdir}/ %if %{with rpmwheels} %exclude %{pypylibdir}/ensurepip/_bundled %endif %if "%{_lib}" == "lib64" %{_prefix}/lib/pypy%{pyversion}/ %endif %{_libdir}/libpypy%{pyversion}-c.so.%{soname_version} %if %{with emacs} %{_emacs_sitelispdir}/pypy%{pyversion}trace-mode.el %{_emacs_sitelispdir}/pypy%{pyversion}trace-mode.elc %endif # Keep this synced with %%files test below %exclude %{pypylibdir}/_ctypes_test.* %exclude %{pypylibdir}/_pypy_testcapi.* %exclude %{pypylibdir}/_test* %exclude %{pypylibdir}/__pycache__/_ctypes_test.* %exclude %{pypylibdir}/__pycache__/_pypy_testcapi.* %exclude %{pypylibdir}/__pycache__/_test* %exclude %{pypylibdir}/test/ %exclude %{pypylibdir}/*/testing/ %exclude %{pypylibdir}/*/test/ %exclude %{pypylibdir}/*/tests/ %exclude %{pypylibdir}/idlelib/idle_test/ %exclude %{pypylibdir}/testcapi_long.h # Keep this synced with %%files devel below %exclude %{pypylibdir}/cffi/*.h %exclude %{pypylibdir}/hpy/devel/ %files test # Keep this synced with %%excluded %%files in libs %{pypylibdir}/_ctypes_test.* %{pypylibdir}/_pypy_testcapi.* %{pypylibdir}/_test* %{pypylibdir}/__pycache__/_ctypes_test.* %{pypylibdir}/__pycache__/_pypy_testcapi.* %{pypylibdir}/__pycache__/_test* %{pypylibdir}/test/ %{pypylibdir}/*/testing/ %{pypylibdir}/*/test/ %{pypylibdir}/*/tests/ %{pypylibdir}/idlelib/idle_test/ %{pypylibdir}/testcapi_long.h %files devel %dir %{_includedir}/pypy%{pyversion} %{_includedir}/pypy%{pyversion}/*.h %{_libdir}/libpypy%{pyversion}-c.so %if %{with main_pypy3} %{_rpmconfigdir}/macros.d/macros.pypy3 %endif # Keep this synced with %%excluded %%files in libs %{pypylibdir}/cffi/*.h %{pypylibdir}/hpy/devel/ %changelog * Fri Jan 20 2023 Fedora Release Engineering - 7.3.11-2.3.9 - Rebuilt for https://fedoraproject.org/wiki/Fedora_38_Mass_Rebuild * Fri Dec 30 2022 Miro Hrončok - 7.3.11-1.3.9 - Update to 7.3.11 - Fixes: rhbz#2147520 * Fri Dec 02 2022 Miro Hrončok - 7.3.9-5.3.9 - On Fedora 37+, obsolete the pypy3.7 package which is no longer available * Mon Oct 10 2022 Lumír Balhar - 7.3.9-4.3.9 - Backport fix for CVE-2021-28861 Resolves: rhbz#2120789 * Fri Jul 22 2022 Fedora Release Engineering - 7.3.9-3.3.9 - Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild * Tue Jun 28 2022 Charalampos Stratakis - 7.3.9-2.3.9 - Security fix for CVE-2015-20107 - Fixes: rhbz#2075390 * Wed Mar 30 2022 Miro Hrončok - 7.3.9-1.3.9 - Update to 7.3.9 - Fixes: rhbz#2069873 * Tue Mar 01 2022 Miro Hrončok - 7.3.8-1.3.9 - Include the Python version in Release to workaround debuginfo conflicts and make same builds of different PyPy sort in a predictable way (e.g. wrt Obsoletes) - Namespace the debugsources to fix installation conflict with other PyPys - Fixes: rhbz#2053880 - This is now the main PyPy 3 on Fedora 36+ - Fixes: rhbz#2059670 * Tue Feb 22 2022 Miro Hrončok - 7.3.8-1 - Update to 7.3.8 final * Fri Feb 11 2022 Miro Hrončok - 7.3.8~rc2-1 - Update to 7.3.8rc2 * Wed Jan 26 2022 Miro Hrončok - 7.3.8~rc1-1 - Update to 7.3.8rc1 - Move to a CPython-like installation layout - Stop requiring pypy3.9 from pypy3.9-libs - Split tests into pypy3.9-test * Fri Jan 21 2022 Fedora Release Engineering - 7.3.7-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Sat Jan 08 2022 Miro Hrončok - 7.3.7-2 - Rebuilt for https://fedoraproject.org/wiki/Changes/LIBFFI34 * Thu Nov 11 2021 Miro Hrončok - 7.3.7-1 - Initial pypy3.8 package - Supplement tox * Tue Oct 26 2021 Tomáš Hrnčiar - 7.3.6-1 - Update to 7.3.6 - Remove windows executable binaries - Fixes: rhbz#2003682 * Mon Sep 20 2021 Miro Hrončok - 7.3.5-2 - Explicitly buildrequire OpenSSL 1.1, as Python 3.7 is not compatible with OpenSSL 3.0 * Mon Aug 16 2021 Miro Hrončok - 7.3.5-1 - Update to 7.3.5 - Fixes: rhbz#1992600 * Mon Aug 09 2021 Tomas Hrnciar - 7.3.4-4 - Rename pypy3 to pypy3.7 - pypy-stackless was removed * Fri Jul 23 2021 Fedora Release Engineering - 7.3.4-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild * Wed Jul 21 2021 Tomas Hrnciar - 7.3.4-2 - Replace removed /usr/lib/rpm/brp-python-bytecompile with %%py_byte_compile macros - Fixes: rhbz#1976656 * Tue May 25 2021 Miro Hrončok - 7.3.4-1 - Update to 7.3.4 - pypy3 is now Python 3.7 - Fixes rhbz#1961933 * Tue May 25 2021 Miro Hrončok - 7.3.1-6 - Provide missing bundled library information * Wed May 19 2021 Charalampos Stratakis - 7.3.1-5 - Add virtual provides for the bundled libmpdec (rhbz#1943359) * Wed Jan 27 2021 Fedora Release Engineering - 7.3.1-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild * Sat Aug 01 2020 Fedora Release Engineering - 7.3.1-3 - Second attempt - Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild * Tue Jul 28 2020 Fedora Release Engineering - 7.3.1-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild * Wed Apr 15 2020 Tomas Hrnciar - 7.3.1-1 - Update to 7.3.1 * Wed Feb 12 2020 Miro Hrončok - 7.3.0-3 - Update the ensurepip module to work with setuptools >= 45 * Thu Jan 30 2020 Fedora Release Engineering - 7.3.0-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild * Sat Dec 28 2019 Miro Hrončok - 7.3.0-1 - Update to 7.3.0 * Wed Oct 23 2019 Miro Hrončok - 7.2.0-2 - Enable JIT on aarch64 * Mon Oct 14 2019 Miro Hrončok - 7.2.0-1 - Update to 7.2.0 (#1757707) - Enable aarch64 (without JIT) - Enable power64 (with JIT) * Fri Jul 26 2019 Fedora Release Engineering - 7.1.1-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild * Fri May 24 2019 Miro Hrončok - 7.1.1-1 - Update to 7.1.1 (#1689198) - pypy3 is now Python 3.6 * Thu May 16 2019 Miro Hrončok - 7.0.0-2 - Show the version as 7.0.0 * Thu Feb 28 2019 Miro Hrončok - 7.0.0-1 - Update to 7.0.0 (#1673127) * Sat Feb 02 2019 Fedora Release Engineering - 6.0.0-5 - Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild * Mon Jan 14 2019 Björn Esser - 6.0.0-4 - Rebuilt for libcrypt.so.2 (#1666033) * Tue Aug 21 2018 Miro Hrončok - 6.0.0-3 - Use RPM packaged wheels * Fri Jul 13 2018 Fedora Release Engineering - 6.0.0-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild * Wed Apr 25 2018 Miro Hrončok - 6.0.0-1 - Fix failing taskotron check - New release 6.0.0 (#1571489) - Fix multiprocessing regression on newer glibcs (#1569933) * Wed Apr 11 2018 Miro Hrončok - 5.10.1-7 - Provide pypy3(abi) = 5.10 * Wed Apr 11 2018 Miro Hrončok - 5.10.1-6 - RPM macros improvements * Tue Apr 10 2018 Michal Cyprian - 5.10.1-5 - Remove the rightmost version number from the path - rhbz#1516885: https://bugzilla.redhat.com/show_bug.cgi?id=1516885 * Thu Mar 29 2018 Michal Cyprian - 5.10.1-4 - Add patch for libxcrypt * Fri Feb 09 2018 Fedora Release Engineering - 5.10.1-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild * Sat Jan 20 2018 Björn Esser - 5.10.1-2 - Rebuilt for switch to libxcrypt * Fri Jan 12 2018 Miro Hrončok - 5.10.1-1 - Update to 5.10.1 (#1533689) - Removed two upstreamed patches * Fri Dec 29 2017 Miro Hrončok - 5.10.0-3 - Remove never used InstallPyPy function - Actually call execstack as originally intended - Use execstack on all arches (it's available now) - Don't ship the debug binaries - On power, use cpython2 to build pypy3 * Thu Dec 28 2017 Miro Hrončok - 5.10.0-2 - Fixed upstream issues #2717 and #2718 (re-enable test_socket) - Use pypy2 when building (it's faster and works this time) * Mon Dec 25 2017 Miro Hrončok - 5.10.0-1 - Update to 5.10 (#1528841) - Use pypy2 and python2-pycparser (note the twos) - Enable JIT on power and s390x - Temporarily skip test_socket on ix86 * Fri Oct 20 2017 Miro Hrončok - 5.9.0-1 - Update to 5.9 (#1504427) - Remove merged patches - Reindex the patches to match the filenames - Rebase the faulthandler Patch11 - BR python-pycparser * Thu Aug 03 2017 Fedora Release Engineering - 5.5.0-6 - Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild * Thu Jul 27 2017 Fedora Release Engineering - 5.5.0-5 - Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild * Sat Feb 11 2017 Fedora Release Engineering - 5.5.0-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild * Sun Nov 13 2016 Dan Horák - 5.5.0-3 - set z10 as the base CPU for s390(x) build * Sat Nov 12 2016 Zbigniew Jędrzejewski-Szmek - 5.5.0-2 - Also build on arm and s390* * Sat Oct 15 2016 Miro Hrončok - 5.5.0-1 - PyPy 3.3 5.5.0 - On Fedora 26+, BR compat-openssl10-devel * Sat Jul 02 2016 Miro Hrončok - 5.2.0-0.1.alpha1 - First alpha build of PyPy 3.3 * Fri Jul 01 2016 Miro Hrončok - 2.4.0-3 - Fix for: CVE-2016-0772 python: smtplib StartTLS stripping attack - Raise an error when STARTTLS fails - rhbz#1303647: https://bugzilla.redhat.com/show_bug.cgi?id=1303647 - rhbz#1351680: https://bugzilla.redhat.com/show_bug.cgi?id=1351680 - Fixed upstream: https://hg.python.org/cpython/rev/d590114c2394 - Fix for: CVE-2016-5699 python: http protocol steam injection attack - rhbz#1303699: https://bugzilla.redhat.com/show_bug.cgi?id=1303699 - rhbz#1351687: https://bugzilla.redhat.com/show_bug.cgi?id=1351687 - Fixed upstream: https://hg.python.org/cpython/rev/bf3e1c9b80e9 * Thu Jun 18 2015 Fedora Release Engineering - 2.4.0-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild * Wed Sep 10 2014 Matej Stuchlik - 2.4.0-1 - Update to 2.4.0 * Tue Sep 02 2014 Matej Stuchlik - 2.3.1-4 - Move devel subpackage requires so that it gets picked up by rpm * Sun Aug 17 2014 Fedora Release Engineering - 2.3.1-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild * Mon Jul 7 2014 Peter Robinson 2.3.1-2 - ARMv7 is supported for JIT - no prelink on aarch64/ppc64le * Sun Jun 08 2014 Matej Stuchlik - 2.3.1-1 - Update to 2.3.1 * Sat Jun 07 2014 Fedora Release Engineering - 2.3-5 - Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild * Tue May 27 2014 Dennis Gilmore - 2.3-4 - valgrind is available everywhere except 31 bit s390 * Wed May 21 2014 Jaroslav Škarvada - 2.3-3 - Rebuilt for https://fedoraproject.org/wiki/Changes/f21tcl86 * Thu May 15 2014 Matej Stuchlik - 2.3-2 - Rebuilt (f21-python) * Tue May 13 2014 Matej Stuchlik - 2.3-1 - Updated to 2.3 * Mon Mar 10 2014 Matej Stuchlik - 2.2.1-3 - Put RPM macros in proper location * Thu Jan 16 2014 Matej Stuchlik - 2.2.1-2 - Fixed errors due to missing __pycache__ * Thu Dec 05 2013 Matej Stuchlik - 2.2.1-1 - Updated to 2.2.1 - Several bundled modules (tkinter, sqlite3, curses, syslog) were not bytecompiled properly during build, that is now fixed - prepared new tests, not enabled yet * Thu Nov 14 2013 Matej Stuchlik - 2.2.0-1 - Updated to 2.2.0 * Thu Aug 15 2013 Matej Stuchlik - 2.1-1 - Updated to 2.1.0 * Sun Aug 04 2013 Fedora Release Engineering - 2.0.2-5 - Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild * Mon Jun 24 2013 Matej Stuchlik - 2.0.2-4 - Patch1 fix * Mon Jun 24 2013 Matej Stuchlik - 2.0.2-3 - Yet another Sources fix * Mon Jun 24 2013 Matej Stuchlik - 2.0.2-2 - Fixed Source URL * Mon Jun 24 2013 Matej Stuchlik - 2.0.2-1 - 2.0.2, patch 8 does not seem necessary anymore * Thu Feb 14 2013 Fedora Release Engineering - 2.0-0.2.b1 - Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild * Tue Dec 11 2012 David Malcolm - 2.0-0.1.b1 - 2.0b1 (drop upstreamed patch 9) * Sat Jul 21 2012 Fedora Release Engineering - 1.9-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild * Tue Jul 10 2012 David Malcolm - 1.9-3 - log all output from "make" (patch 6) - disable the MOTD at startup (patch 7) - hide symbols from the dynamic linker (patch 8) - add PyInt_AsUnsignedLongLongMask (patch 9) - capture the Makefile, the typeids.txt, and the dynamic-symbols file within the debuginfo package * Mon Jun 18 2012 Peter Robinson - 1.9-2 - Compile with PIC, fixes FTBFS on ARM * Fri Jun 8 2012 David Malcolm - 1.9-1 - 1.9 * Fri Feb 10 2012 David Malcolm - 1.8-2 - disable C readability patch for now (patch 4) * Thu Feb 9 2012 David Malcolm - 1.8-1 - 1.8; regenerate config patch (patch 0); drop selinux patch (patch 2); regenerate patch 5 * Tue Jan 31 2012 David Malcolm - 1.7-4 - fix an incompatibility with virtualenv (rhbz#742641) * Sat Jan 14 2012 Fedora Release Engineering - 1.7-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild * Fri Dec 16 2011 David Malcolm - 1.7-2 - use --gcrootfinder=shadowstack, and use standard Fedora compilation flags, with -Wno-unused (rhbz#666966 and rhbz#707707) * Mon Nov 21 2011 David Malcolm - 1.7-1 - 1.7: refresh patch 0 (configuration) and patch 4 (readability of generated code) * Tue Oct 4 2011 David Malcolm - 1.6-7 - skip test_multiprocessing * Tue Sep 13 2011 David Malcolm - 1.6-6 - don't ship the emacs JIT-viewer on el5 and el6 (missing emacs-filesystem; missing _emacs_bytecompile macro on el5) * Mon Sep 12 2011 David Malcolm - 1.6-5 - build using python26 on el5 (2.4 is too early) * Thu Aug 25 2011 David Malcolm - 1.6-4 - fix SkipTest function to avoid corrupting the name of "test_gdbm" * Thu Aug 25 2011 David Malcolm - 1.6-3 - add rpm macros file to the devel subpackage (source 2) - skip some tests that can't pass yet * Sat Aug 20 2011 David Malcolm - 1.6-2 - work around test_subprocess failure seen in koji (patch 5) * Thu Aug 18 2011 David Malcolm - 1.6-1 - 1.6 - rewrite the %%check section, introducing per-test timeouts * Tue Aug 2 2011 David Malcolm - 1.5-2 - add pypytrace-mode.el to the pypy-libs subpackage, for viewing JIT trace logs in emacs * Mon May 2 2011 David Malcolm - 1.5-1 - 1.5 * Wed Apr 20 2011 David Malcolm - 1.4.1-10 - build a /usr/bin/pypy (but without the JIT compiler) on architectures that don't support the JIT, so that they do at least have something that runs * Tue Feb 08 2011 Fedora Release Engineering - 1.4.1-9 - Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild * Fri Jan 14 2011 David Malcolm - 1.4.1-8 - disable self-hosting for now, due to fatal error seen JIT-compiling the translator * Fri Jan 14 2011 David Malcolm - 1.4.1-7 - skip test_ioctl for now * Thu Jan 13 2011 David Malcolm - 1.4.1-6 - add a "pypy-devel" subpackage, and install the header files there - in %%check, re-run failed tests in verbose mode * Fri Jan 7 2011 Dan Horák - 1.4.1-5 - valgrind available only on selected architectures * Wed Jan 5 2011 David Malcolm - 1.4.1-4 - rebuild pypy using itself, for speed, with a boolean to break this cycle in the build-requirement graph (falling back to using "python-devel" aka CPython) - add work-in-progress patch to try to make generated c more readable (rhbz#666963) - capture the RPython source code files from the build within the debuginfo package (rhbz#666975) * Wed Dec 22 2010 David Malcolm - 1.4.1-3 - try to respect the FHS by installing libraries below libdir, rather than datadir; patch app_main.py to look in this installation location first when scanning for the pypy library directories. - clarifications and corrections to the comments in the specfile * Wed Dec 22 2010 David Malcolm - 1.4.1-2 - remove .svn directories - disable verbose logging - add a %%check section - introduce %%goal_dir variable, to avoid repetition - remove shebang line from demo/bpnn.py, as we're treating this as a documentation file - regenerate patch 2 to apply without generating a .orig file * Tue Dec 21 2010 David Malcolm - 1.4.1-1 - 1.4.1; fixup %%setup to reflect change in toplevel directory in upstream source tarball - apply SELinux fix to the bundled test_commands.py (patch 2) * Wed Dec 15 2010 David Malcolm - 1.4-4 - rename the jit build and subpackge to just "pypy", and remove the nojit and sandbox builds, as upstream now seems to be focussing on the JIT build (with only stackless called out in the getting-started-python docs); disable stackless for now - add a verbose_logs specfile boolean; leave it enabled for now (whilst fixing build issues) - add more comments, and update others to reflect 1.2 -> 1.4 changes - re-enable debuginfo within CFLAGS ("-g") - add the LICENSE and README to all subpackages - ensure the built binaries don't have the "I need an executable stack" flag - remove DOS batch files during %%prep (idlelib.bat) - remove shebang lines from .py files that aren't executable, and remove executability from .py files that don't have a shebang line (taken from our python3.spec) - bytecompile the .py files into .pyc files in pypy's bytecode format * Sun Nov 28 2010 Toshio Kuratomi - 1.4-3 - BuildRequire valgrind-devel - Install pypy library from the new directory - Disable building with our CFLAGS for now because they are causing a build failure. - Include site-packages directory * Sat Nov 27 2010 Toshio Kuratomi - 1.4-2 - Add patch to configure the build to use our CFLAGS and link libffi dynamically * Sat Nov 27 2010 Toshio Kuratomi - 1.4-1 - Update to 1.4 - Drop patch for py2.6 that's in this build - Switch to building pypy with itself once pypy is built once as recommended by upstream - Remove bundled, prebuilt java libraries - Fix license tag - Fix source url - Version pypy-libs Req * Tue May 4 2010 David Malcolm - 1.2-2 - cherrypick r72073 from upstream SVN in order to fix the build against python 2.6.5 (patch 2) * Wed Apr 28 2010 David Malcolm - 1.2-1 - initial packaging