## START: Set by rpmautospec ## (rpmautospec version 0.3.5) ## RPMAUTOSPEC: autorelease, autochangelog %define autorelease(e:s:pb:n) %{?-p:0.}%{lua: release_number = 1; base_release_number = tonumber(rpm.expand("%{?-b*}%{!?-b:1}")); print(release_number + base_release_number - 1); }%{?-e:.%{-e*}}%{?-s:.%{-s*}}%{!?-n:%{?dist}} ## END: Set by rpmautospec # Sphinx-generated HTML documentation is not suitable for packaging; see # https://bugzilla.redhat.com/show_bug.cgi?id=2006555 for discussion. # # We can generate PDF documentation as a substitute. %bcond doc_pdf 1 # As of 2022-12-12, PySide6 (https://pypi.org/project/PySide6/) is not yet # packaged in Fedora. When it is, we should use it. %bcond qt6 0 Name: python-ezdxf Version: 1.1.2 Release: %autorelease Summary: Create/manipulate DXF drawings # The entire source is MIT, except: # # - The following are derived from https://github.com/mapbox/earcut (but are a # rewrite from C++ to Python, so are not treated as a bundled dependency) and # are therefore (ISC AND MIT): # * src/ezdxf/acc/mapbox_earcut.pyx # * src/ezdxf/math/_mapbox_earcut.py # - The following is derived from # https://github.com/mlarocca/AlgorithmsAndDataStructuresInAction/tree/master/JavaScript/src/ss_tree # (but is a rewrite from JavaScript to Python, so is not treated as a bundled # dependency) and is therefore (AGPL-3.0-only AND MIT): # * src/ezdxf/math/rtree.py # # Additionally: # - The following is derived from https://github.com/enzoruiz/3dbinpacking. # Since the original source is Python, it is treated as a bundled dependency; # since the implementation is forked, it cannot be unbundled. The original # source is also under an (MIT) license, so this does not affect the License # tag. # * ezdxf/addons/binpacking.py # # Various fonts in the fonts/ directory are each under one of: # - Apache-2.0 # - Bitstream-Vera AND LicenseRef-Fedora-Public-Domain # - OFL-1.0 # - LicenseRef-Liberation # so they can all be redistributed, but they are used only for testing and do # not contribute to the licenses of the binary RPMs. We double-check for # incorrectly-installed font files in %%check. License: MIT AND ISC AND AGPL-3.0-only URL: https://ezdxf.mozman.at/ %global forgeurl https://github.com/mozman/ezdxf Source0: %{forgeurl}/archive/v%{version}/ezdxf-%{version}.tar.gz # Man pages written for Fedora in groff_man(7) format based on --help output # and docs/ content. Source10: ezdxf.1 Source11: ezdxf-audit.1 Source12: ezdxf-browse.1 Source13: ezdxf-browse-acis.1 Source14: ezdxf-config.1 Source15: ezdxf-draw.1 Source16: ezdxf-hpgl.1 Source17: ezdxf-info.1 Source18: ezdxf-pp.1 Source19: ezdxf-strip.1 Source20: ezdxf-view.1 BuildRequires: python3-devel BuildRequires: gcc-c++ BuildRequires: dos2unix # Standard styles use OpenSans and Liberation fonts; see # src/ezdxf/tools/standards.py BuildRequires: font(opensans) BuildRequires: font(opensansextrabold) BuildRequires: font(opensanslight) BuildRequires: font(opensanssemibold) BuildRequires: font(liberationmono) BuildRequires: font(liberationsans) BuildRequires: font(liberationsansnarrow) BuildRequires: font(liberationserif) # This is used in tests/test_08_addons/test_814_text2path.py. (The test is # simply skipped if the font is not present.) BuildRequires: font(notosanssc) %if %{with doc_pdf} BuildRequires: make BuildRequires: python3-sphinx-latex BuildRequires: latexmk BuildRequires: /usr/bin/xindy BuildRequires: tex-xetex-bin BuildRequires: /usr/bin/rsvg-convert %endif %global common_description %{expand: This Python package is for creating and modifying DXF documents, regardless of the DXF version. The package supports loading and rewriting DXF file without losing any content except comments. Unknown DXF tags in the document are ignored but kept for rewriting. This behavior allows processing DXF documents that contain data from third-party applications without loosing information.} %description %{common_description} %package -n python3-ezdxf Summary: %{summary} Requires: font(opensans) Requires: font(opensansextrabold) Requires: font(opensanslight) Requires: font(opensanssemibold) Requires: font(liberationmono) Requires: font(liberationsans) Requires: font(liberationsansnarrow) Requires: font(liberationserif) # See the note above the %%pyproject_extras_subpkg invocation. Obsoletes: python3-ezdxf+all < 0.17.2-7 Obsoletes: python3-ezdxf+all < 0.17.2-7 # ezdxf/addons/binpacking.py is derived from an unspecified version of py3dbp # (https://github.com/enzoruiz/3dbinpacking, https://pypi.org/project/py3dbp/). # The implementation is significantly forked, so unbundling will not be # possible. Provides: bundled(python3dist(py3dbp)) %description -n python3-ezdxf %{common_description} # Note extra “all” is “draw”+“dev”+“test”, and “all5” is “draw5”+“dev”+“test”. # Since it does not really make sense to package extras metapackages for dev # and test dependencies, we omit these two extras as well. %pyproject_extras_subpkg -n python3-ezdxf %{?with_qt6:draw},draw5 %package doc Summary: Documentation for ezdxf BuildArch: noarch %description doc %{common_description} %prep %autosetup -n ezdxf-%{version} # Note that C++ sources in the GitHub tarball are *not* Cython-generated, and # we must not remove them. # Since pdflatex cannot handle Unicode inputs in general: echo "latex_engine = 'xelatex'" >> docs/source/conf.py rm docs/graphics/dimtad-dimjust.pdf # Fix files with CRNL newlines and, in some cases, UTF-16LE encoding: dos2unix --keepdate \ docs/notes/dxf-group-code-reference.txt \ examples/copydxf.py \ examples_dxf/text.dxf \ examples_dxf/text_negative_extrusion.dxf # qtviewer.py is not executable and is not script-like (no main routine or # useful side effects), so it does not need a shebang sed -r -i '1{/^#!/d}' src/ezdxf/addons/drawing/qtviewer.py # A couple of examples are installed as executables, with shebangs that need to # be corrected. %py3_shebang_fix examples # We don’t need to run typecheckers, and we must build documentation with # whichever sphinx-rtd-theme version we have. sed -r \ -e 's/^(typing_extensions%{?!with_qt6:|pyside6})\b/# \1/' \ -e 's/^(sphinx-rtd-theme)<.*$/\1/' \ requirements-dev.txt | tee requirements-dev-filtered.txt %generate_buildrequires # Note extra “all” is “draw”+“dev”+“test”, and “all5” is “draw5”+“dev”+“test”. %pyproject_buildrequires -x all%{?!with_qt6:5} requirements-dev-filtered.txt %build %pyproject_wheel %if %{with doc_pdf} # Cannot use SVG images when building PDF documentation; convert to PDFs find docs -type f -name '*.svg' | while read -r fn do rsvg-convert --format=pdf "${fn}" \ --output="$(dirname "${fn}")/$(basename "${fn}" .svg).pdf" done find docs/source -type f -exec \ gawk '/\.svg/ { print FILENAME; nextfile }' '{}' '+' | xargs -r -t sed -r -i 's/\.svg/\.pdf/g' BLIB="${PWD}/build/lib.%{python3_platform}-cpython-%{python3_version_nodots}" PYTHONPATH="${BLIB}" %make_build -C docs -f Makefile.linux latex \ SPHINXOPTS='-j%{?_smp_build_ncpus}' %make_build -C docs/build/latex LATEXMKOPTS='-quiet' %endif %install %pyproject_install %pyproject_save_files ezdxf install -t '%{buildroot}%{_mandir}/man1' -D -p -m 0644 \ '%{SOURCE10}' '%{SOURCE11}' '%{SOURCE12}' '%{SOURCE13}' '%{SOURCE14}' \ '%{SOURCE15}' '%{SOURCE16}' '%{SOURCE17}' '%{SOURCE18}' '%{SOURCE19}' \ '%{SOURCE20}' %check # No need to set EZDXF_TEST_FILES because the files in question are not # available (and are presumably not freely distributable). This is fine; it # just means a few tests are automatically skipped. # See tox-extras.ini: # Note: It is NOT safe to parallelize these tests with pytest-xdist! %pytest -k "${k-}" tests integration_tests -v # Since the user can disable the C extensions, test the pure-Python # implementations too: EZDXF_DISABLE_C_EXT=1 %pytest -k "${k-}" tests integration_tests -v # Verify that no bundled fonts were installed. if find '%{buildroot}' -type f \( \ -name '*.tt[fc]' -o -name '*.otf' \ -o -name '*.woff' -o -name '*.woff2' -o -name '*.eof' \ -o -name '*.sh[xp]' -o name '*.lff' \) then echo 'BUNDLED FONTS WERE INSTALLED!' 1>&2 exit 1 fi %files -n python3-ezdxf -f %{pyproject_files} # pyproject-rpm-macros handles the LICENSE file; verify with “rpm -qL -p …” %doc README.md %{_bindir}/ezdxf %{_mandir}/man1/ezdxf*.1* %files doc %license LICENSE %doc NEWS*.md %doc README.md %doc TODO.md %doc autolisp/ %doc examples/ %doc examples_dxf/ %doc exploration/ %doc docs/notes/ %if %{with doc_pdf} %doc docs/build/latex/ezdxf.pdf %endif %changelog * Wed Nov 01 2023 Benjamin A. Beasley - 1.1.2-1 - Update to 1.1.2 (close RHBZ#2247384) * Mon Oct 30 2023 Benjamin A. Beasley - 1.1.1-1 - Update to 1.1.1 (close RHBZ#2242700) * Wed Sep 27 2023 Benjamin A. Beasley - 1.1.0-2 - Keep timestamps when converting text file line endings * Sat Sep 09 2023 Benjamin A. Beasley - 1.1.0-1 - Update to 1.1.0 (close RHBZ#2238122) * Fri Jul 21 2023 Benjamin A. Beasley - 1.0.3-11 - Note that the Cython 3 patch was cherry-picked onto 1.0.3 * Fri Jul 21 2023 Benjamin A. Beasley - 1.0.3-10 - Backport upstream patch for Cython 3 * Thu Jul 20 2023 Benjamin A. Beasley - 1.0.3-9 - Pin Cython<3 and report test failures upstream * Fri Jul 14 2023 Benjamin A. Beasley - 1.0.3-8 - Backport fixes for Python 3.12 * Tue Jul 11 2023 Benjamin A. Beasley - 1.0.3-7 - Guard against the python3_version macro being possibly-undefined * Tue Jul 11 2023 Benjamin A. Beasley - 1.0.3-6 - Use trailing slashes for directories in files lists * Mon Jul 10 2023 Benjamin A. Beasley - 1.0.3-5 - Skip failing tests on Python 3.12 and report them upstream (close RHBZ#2220213) * Mon Jul 10 2023 Python Maint - 1.0.3-4 - Rebuilt for Python 3.12 * Tue Jun 20 2023 Benjamin A. Beasley - 1.0.3-3 - Use new (rpm 4.17.1+) bcond style * Tue Apr 11 2023 Benjamin A. Beasley - 1.0.3-2 - Revert "Work around font(notosanssc) not in Rawhide/F39" * Sun Mar 26 2023 Benjamin A. Beasley - 1.0.3-1 - Update to 1.0.3 (close RHBZ#2181824) * Sun Mar 26 2023 Benjamin A. Beasley - 1.0.2-5 - Run the tests verbosely * Fri Mar 17 2023 Benjamin A. Beasley - 1.0.2-4 - Work around font(notosanssc) not in Rawhide/F39 * Fri Mar 17 2023 Benjamin A. Beasley - 1.0.2-3 - Don’t assume %%_smp_mflags is -j%%_smp_build_ncpus * Wed Mar 08 2023 Benjamin A. Beasley - 1.0.2-2 - Drop %%pyproject_build_lib (F37+) * Wed Feb 15 2023 Benjamin A. Beasley - 1.0.2-1 - Update to 1.0.2 (close RHBZ#2169913) * Fri Jan 20 2023 Fedora Release Engineering - 1.0.1-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_38_Mass_Rebuild * Sun Jan 15 2023 Benjamin A. Beasley - 1.0.1-1 - Update to 1.0.1 (close RHBZ#2160893) * Tue Dec 13 2022 Benjamin A. Beasley - 1.0.0-1 - Update to 1.0.0 (close RHBZ#2152123) * Sat Oct 22 2022 Benjamin A. Beasley - 0.18.1-2 - Add a comment about licenses of removed/unbundled fonts * Sat Sep 03 2022 Benjamin A. Beasley - 0.18.1-1 - Update to 0.18.1 (close RHBZ#2123923) * Mon Aug 22 2022 Benjamin A. Beasley - 0.18-3 - Use rsvg-convert instead of inkscape * Tue Aug 02 2022 Benjamin A. Beasley - 0.18-2 - Backport upstream fixes/workarounds for non-x86 failures * Sat Jul 30 2022 Benjamin A. Beasley - 0.18-1 - Update to 0.18 (close RHBZ#2112288) - Generate documentation dependencies from requirements-dev.txt - Run DXF examples as extra tests - License changes from MIT to (now SPDX): (MIT AND (ISC AND MIT) AND (AGPL-3.0-only AND MIT)) * Fri Jul 29 2022 Benjamin A. Beasley - 0.17.2-7 - Drop “all”/“all5” extras metapackages * Fri Jul 22 2022 Fedora Release Engineering - 0.17.2-6 - Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild * Tue Jul 19 2022 Zbigniew Jędrzejewski-Szmek - 0.17.2-5 - Rebuilt for pyparsing-3.0.9 * Wed Jun 15 2022 Python Maint - 0.17.2-4 - Rebuilt for Python 3.11 * Wed Apr 20 2022 Benjamin A. Beasley - 0.17.2-3 - Drop “forge” macros, which aren’t really doing much here * Wed Apr 20 2022 Benjamin A. Beasley - 0.17.2-2 - Install man pages directly * Thu Mar 03 2022 Benjamin A. Beasley - 0.17.2-1 - Initial package (close RHBZ#2040816)