Warning: Permanently added '2620:52:3:1:dead:beef:cafe:c18a' (ED25519) to the list of known hosts. stdout: stderr: INFO: Reading stdout from command: git rev-parse --abbrev-ref HEAD INFO: Reading stdout from command: git rev-parse HEAD INFO: Reading sources specification file: sources INFO: Downloading flask-compress-1.13.tar.gz INFO: Calling: curl -H Pragma: -o flask-compress-1.13.tar.gz --location --remote-time --show-error --fail https://copr-dist-git.fedorainfracloud.org/repo/pkgs/torsava/automatic-obsoletes:pr:1/python-flask-compress/flask-compress-1.13.tar.gz/md5/eea205d2dfdbfc63f2ead8ae2d63d80b/flask-compress-1.13.tar.gz % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 11278 100 11278 0 0 252k 0 --:--:-- --:--:-- --:--:-- 256k INFO: Reading stdout from command: md5sum flask-compress-1.13.tar.gz Running (timeout=18000): unbuffer mock --buildsrpm --spec /var/lib/copr-rpmbuild/workspace/workdir-6e6y6yj_/python-flask-compress/python-flask-compress.spec --sources /var/lib/copr-rpmbuild/workspace/workdir-6e6y6yj_/python-flask-compress --resultdir /var/lib/copr-rpmbuild/results --uniqueext 1663925790.119649 -r /var/lib/copr-rpmbuild/results/configs/child.cfg INFO: mock.py version 3.1 starting (python version = 3.10.4, NVR = mock-3.1-1.fc35)... Start(bootstrap): init plugins INFO: tmpfs initialized INFO: selinux enabled INFO: chroot_scan: initialized INFO: compress_logs: initialized Finish(bootstrap): init plugins Start: init plugins INFO: tmpfs initialized INFO: selinux enabled INFO: chroot_scan: initialized INFO: compress_logs: initialized Finish: init plugins INFO: Signal handler active Start: run INFO: Start(/var/lib/copr-rpmbuild/workspace/workdir-6e6y6yj_/python-flask-compress/python-flask-compress.spec) Config(fedora-rawhide-x86_64) Start: clean chroot Finish: clean chroot Start(bootstrap): chroot init INFO: mounting tmpfs at /var/lib/mock/fedora-rawhide-x86_64-bootstrap-1663925790.119649/root. INFO: calling preinit hooks INFO: enabled root cache INFO: enabled package manager cache Start(bootstrap): cleaning package manager metadata Finish(bootstrap): cleaning package manager metadata INFO: enabled HW Info plugin Mock Version: 3.1 INFO: Mock Version: 3.1 Start(bootstrap): dnf install No matches found for the following disable plugin patterns: local, spacewalk, versionlock Updating Subscription Management repositories. Unable to read consumer identity This system is not registered with an entitlement server. You can use subscription-manager to register. Copr repository 18 MB/s | 14 MB 00:00 fedora 14 MB/s | 65 MB 00:04 Last metadata expiration check: 0:00:03 ago on Fri Sep 23 09:36:38 2022. Dependencies resolved. ================================================================================ Package Arch Version Repo Size ================================================================================ Installing: dnf noarch 4.14.0-1.fc38 fedora 480 k dnf-plugins-core noarch 4.3.1-1.fc38 copr_base 35 k Installing dependencies: alternatives x86_64 1.19-3.fc37 fedora 36 k audit-libs x86_64 3.0.9-1.fc38 copr_base 117 k basesystem noarch 11-14.fc37 fedora 7.0 k bash x86_64 5.1.16-3.fc37 fedora 1.7 M bzip2-libs x86_64 1.0.8-12.fc37 fedora 41 k ca-certificates noarch 2022.2.54-5.fc37 fedora 829 k coreutils x86_64 9.1-8.fc38 fedora 1.1 M coreutils-common x86_64 9.1-8.fc38 fedora 2.0 M crypto-policies noarch 20220824-2.git2187e9c.fc38 fedora 86 k curl x86_64 7.85.0-1.fc38 fedora 316 k cyrus-sasl-lib x86_64 2.1.28-8.fc38 fedora 792 k dbus-libs x86_64 1:1.14.0-5.fc38 fedora 156 k dnf-data noarch 4.14.0-1.fc38 fedora 43 k elfutils-default-yama-scope noarch 0.187-8.fc38 fedora 16 k elfutils-libelf x86_64 0.187-8.fc38 fedora 197 k elfutils-libs x86_64 0.187-8.fc38 fedora 257 k expat x86_64 2.4.8-2.fc37 fedora 110 k fedora-gpg-keys noarch 38-0.3 fedora 125 k fedora-release noarch 38-0.4 fedora 11 k fedora-release-common noarch 38-0.4 fedora 22 k fedora-release-identity-basic noarch 38-0.4 fedora 12 k fedora-repos noarch 38-0.3 fedora 10 k fedora-repos-rawhide noarch 38-0.3 fedora 9.7 k file-libs x86_64 5.42-4.fc37 fedora 676 k filesystem x86_64 3.18-2.fc37 fedora 1.1 M findutils x86_64 1:4.9.0-2.fc37 fedora 492 k gawk x86_64 5.1.1-4.fc37 fedora 1.0 M gdbm-libs x86_64 1:1.23-2.fc37 fedora 56 k glib2 x86_64 2.74.0-1.fc38 fedora 2.7 M glibc x86_64 2.36.9000-7.fc38 fedora 2.0 M glibc-common x86_64 2.36.9000-7.fc38 fedora 293 k glibc-minimal-langpack x86_64 2.36.9000-7.fc38 fedora 14 k gmp x86_64 1:6.2.1-3.fc37 fedora 315 k gnupg2 x86_64 2.3.7-3.fc37 fedora 2.5 M gnutls x86_64 3.7.7-1.fc37 fedora 1.1 M gpgme x86_64 1.17.0-4.fc37 fedora 210 k grep x86_64 3.8-1.fc38 fedora 292 k ima-evm-utils x86_64 1.4-6.fc37 fedora 63 k json-c x86_64 0.16-2.fc37 fedora 41 k keyutils-libs x86_64 1.6.1-5.fc37 fedora 31 k krb5-libs x86_64 1.19.2-11.fc37.1 fedora 727 k libacl x86_64 2.3.1-4.fc37 fedora 23 k libarchive x86_64 3.6.1-2.fc37 fedora 397 k libassuan x86_64 2.5.5-5.fc37 fedora 67 k libattr x86_64 2.5.1-5.fc37 fedora 18 k libb2 x86_64 0.98.1-7.fc37 fedora 25 k libblkid x86_64 2.38.1-2.fc38 copr_base 107 k libbrotli x86_64 1.0.9-9.fc37 fedora 315 k libcap x86_64 2.48-5.fc37 fedora 67 k libcap-ng x86_64 0.8.3-3.fc37 fedora 33 k libcom_err x86_64 1.46.5-3.fc37 fedora 25 k libcomps x86_64 0.1.18-4.fc37 fedora 76 k libcurl x86_64 7.85.0-1.fc38 fedora 304 k libdnf x86_64 0.68.0-1.fc38 fedora 673 k libevent x86_64 2.1.12-7.fc37 fedora 261 k libffi x86_64 3.4.2-9.fc37 fedora 37 k libfsverity x86_64 1.4-8.fc37 fedora 19 k libgcc x86_64 12.2.1-2.fc38 fedora 106 k libgcrypt x86_64 1.10.1-4.fc37 fedora 512 k libgomp x86_64 12.2.1-2.fc38 fedora 293 k libgpg-error x86_64 1.45-2.fc37 fedora 227 k libidn2 x86_64 2.3.3-2.fc37 fedora 113 k libksba x86_64 1.6.1-1.fc38 fedora 158 k libmodulemd x86_64 2.14.0-4.fc37 fedora 234 k libmount x86_64 2.38.1-2.fc38 copr_base 135 k libnghttp2 x86_64 1.49.0-1.fc38 fedora 74 k libnsl2 x86_64 2.0.0-4.fc37 fedora 30 k libpsl x86_64 0.21.1-6.fc37 fedora 63 k librepo x86_64 1.14.4-1.fc38 fedora 94 k libreport-filesystem noarch 2.17.4-1.fc38 fedora 14 k libselinux x86_64 3.4-5.fc37 fedora 86 k libsemanage x86_64 3.4-5.fc37 fedora 120 k libsepol x86_64 3.4-3.fc37 fedora 322 k libsigsegv x86_64 2.14-3.fc37 fedora 27 k libsmartcols x86_64 2.38.1-2.fc38 copr_base 65 k libsolv x86_64 0.7.22-3.fc37 fedora 405 k libssh x86_64 0.10.4-1.fc38 fedora 210 k libssh-config noarch 0.10.4-1.fc38 fedora 8.4 k libstdc++ x86_64 12.2.1-2.fc38 fedora 800 k libtasn1 x86_64 4.18.0-3.fc37 fedora 75 k libtirpc x86_64 1.3.3-0.fc37 fedora 93 k libunistring x86_64 1.0-2.fc37 fedora 549 k libuuid x86_64 2.38.1-2.fc38 copr_base 28 k libverto x86_64 0.3.2-4.fc37 fedora 21 k libxcrypt x86_64 4.4.28-3.fc38 fedora 117 k libxml2 x86_64 2.9.14-3.fc37 fedora 752 k libyaml x86_64 0.2.5-8.fc37 fedora 60 k libzstd x86_64 1.5.2-3.fc37 fedora 294 k lua-libs x86_64 5.4.4-4.fc37 fedora 217 k lz4-libs x86_64 1.9.3-5.fc37 fedora 70 k mpdecimal x86_64 2.5.1-4.fc37 fedora 102 k mpfr x86_64 4.1.0-10.fc37 fedora 331 k ncurses-base noarch 6.3-3.20220501.fc37 fedora 86 k ncurses-libs x86_64 6.3-3.20220501.fc37 fedora 329 k nettle x86_64 3.8-2.fc37 fedora 414 k npth x86_64 1.6-10.fc38 fedora 24 k openldap x86_64 2.6.3-1.fc38 fedora 254 k openssl-libs x86_64 1:3.0.5-5.fc38 fedora 2.1 M p11-kit x86_64 0.24.1-3.fc37 fedora 376 k p11-kit-trust x86_64 0.24.1-3.fc37 fedora 138 k pcre2 x86_64 10.40-1.fc37.1 fedora 236 k pcre2-syntax noarch 10.40-1.fc37.1 fedora 142 k popt x86_64 1.19-1.fc38 fedora 66 k publicsuffix-list-dafsa noarch 20210518-5.fc37 fedora 58 k python-pip-wheel noarch 22.2.2-2.fc38 copr_base 1.4 M python-setuptools-wheel noarch 65.3.0-1.fc38 copr_base 715 k python3 x86_64 3.11.0~rc2-1.fc38 fedora 27 k python3-dateutil noarch 1:2.8.2-4.fc37 fedora 361 k python3-dbus x86_64 1.2.18-5.fc37 fedora 156 k python3-distro noarch 1.7.0-3.fc37 fedora 48 k python3-dnf noarch 4.14.0-1.fc38 fedora 607 k python3-dnf-plugins-core noarch 4.3.1-1.fc38 copr_base 263 k python3-gpg x86_64 1.17.0-4.fc37 fedora 298 k python3-hawkey x86_64 0.68.0-1.fc38 fedora 108 k python3-libcomps x86_64 0.1.18-4.fc37 fedora 48 k python3-libdnf x86_64 0.68.0-1.fc38 fedora 818 k python3-libs x86_64 3.11.0~rc2-1.fc38 fedora 9.6 M python3-rpm x86_64 4.18.0-1.fc38 copr_base 94 k python3-six noarch 1.16.0-8.fc37 copr_base 43 k readline x86_64 8.1-7.fc37 fedora 211 k rpm x86_64 4.18.0-1.fc38 copr_base 544 k rpm-build-libs x86_64 4.18.0-1.fc38 copr_base 94 k rpm-libs x86_64 4.18.0-1.fc38 copr_base 321 k rpm-sign-libs x86_64 4.18.0-1.fc38 copr_base 27 k sed x86_64 4.8-11.fc37 fedora 306 k setup noarch 2.14.2-1.fc38 fedora 151 k shadow-utils x86_64 2:4.12.3-2.fc38 fedora 1.3 M sqlite-libs x86_64 3.39.3-2.fc38 fedora 658 k systemd-libs x86_64 251.4-53.fc38 fedora 620 k tpm2-tss x86_64 3.2.0-3.fc37 fedora 600 k tzdata noarch 2022c-1.fc38 fedora 717 k xz-libs x86_64 5.2.6-1.fc38 fedora 92 k zchunk-libs x86_64 1.2.3-1.fc38 fedora 51 k zlib x86_64 1.2.12-5.fc38 fedora 94 k Transaction Summary ================================================================================ Install 136 Packages Total download size: 55 M Installed size: 195 M Downloading Packages: (1/136): libblkid-2.38.1-2.fc38.x86_64.rpm 2.2 MB/s | 107 kB 00:00 (2/136): dnf-plugins-core-4.3.1-1.fc38.noarch.r 685 kB/s | 35 kB 00:00 (3/136): audit-libs-3.0.9-1.fc38.x86_64.rpm 2.1 MB/s | 117 kB 00:00 (4/136): libmount-2.38.1-2.fc38.x86_64.rpm 8.5 MB/s | 135 kB 00:00 (5/136): libsmartcols-2.38.1-2.fc38.x86_64.rpm 4.0 MB/s | 65 kB 00:00 (6/136): libuuid-2.38.1-2.fc38.x86_64.rpm 2.0 MB/s | 28 kB 00:00 (7/136): python3-dnf-plugins-core-4.3.1-1.fc38. 14 MB/s | 263 kB 00:00 (8/136): python-pip-wheel-22.2.2-2.fc38.noarch. 42 MB/s | 1.4 MB 00:00 (9/136): python3-rpm-4.18.0-1.fc38.x86_64.rpm 7.9 MB/s | 94 kB 00:00 (10/136): python-setuptools-wheel-65.3.0-1.fc38 17 MB/s | 715 kB 00:00 (11/136): python3-six-1.16.0-8.fc37.noarch.rpm 3.5 MB/s | 43 kB 00:00 (12/136): rpm-4.18.0-1.fc38.x86_64.rpm 31 MB/s | 544 kB 00:00 (13/136): rpm-build-libs-4.18.0-1.fc38.x86_64.r 8.7 MB/s | 94 kB 00:00 (14/136): rpm-libs-4.18.0-1.fc38.x86_64.rpm 21 MB/s | 321 kB 00:00 (15/136): rpm-sign-libs-4.18.0-1.fc38.x86_64.rp 2.7 MB/s | 27 kB 00:00 (16/136): basesystem-11-14.fc37.noarch.rpm 251 kB/s | 7.0 kB 00:00 (17/136): alternatives-1.19-3.fc37.x86_64.rpm 732 kB/s | 36 kB 00:00 (18/136): bzip2-libs-1.0.8-12.fc37.x86_64.rpm 1.2 MB/s | 41 kB 00:00 (19/136): ca-certificates-2022.2.54-5.fc37.noar 9.2 MB/s | 829 kB 00:00 (20/136): bash-5.1.16-3.fc37.x86_64.rpm 12 MB/s | 1.7 MB 00:00 (21/136): coreutils-9.1-8.fc38.x86_64.rpm 13 MB/s | 1.1 MB 00:00 (22/136): crypto-policies-20220824-2.git2187e9c 3.3 MB/s | 86 kB 00:00 (23/136): curl-7.85.0-1.fc38.x86_64.rpm 12 MB/s | 316 kB 00:00 (24/136): cyrus-sasl-lib-2.1.28-8.fc38.x86_64.r 28 MB/s | 792 kB 00:00 (25/136): dbus-libs-1.14.0-5.fc38.x86_64.rpm 6.4 MB/s | 156 kB 00:00 (26/136): coreutils-common-9.1-8.fc38.x86_64.rp 30 MB/s | 2.0 MB 00:00 (27/136): dnf-4.14.0-1.fc38.noarch.rpm 24 MB/s | 480 kB 00:00 (28/136): dnf-data-4.14.0-1.fc38.noarch.rpm 2.5 MB/s | 43 kB 00:00 (29/136): elfutils-default-yama-scope-0.187-8.f 1.1 MB/s | 16 kB 00:00 (30/136): elfutils-libelf-0.187-8.fc38.x86_64.r 11 MB/s | 197 kB 00:00 (31/136): elfutils-libs-0.187-8.fc38.x86_64.rpm 13 MB/s | 257 kB 00:00 (32/136): expat-2.4.8-2.fc37.x86_64.rpm 6.8 MB/s | 110 kB 00:00 (33/136): fedora-gpg-keys-38-0.3.noarch.rpm 7.9 MB/s | 125 kB 00:00 (34/136): fedora-release-38-0.4.noarch.rpm 794 kB/s | 11 kB 00:00 (35/136): fedora-release-common-38-0.4.noarch.r 1.5 MB/s | 22 kB 00:00 (36/136): fedora-release-identity-basic-38-0.4. 849 kB/s | 12 kB 00:00 (37/136): fedora-repos-38-0.3.noarch.rpm 718 kB/s | 10 kB 00:00 (38/136): fedora-repos-rawhide-38-0.3.noarch.rp 695 kB/s | 9.7 kB 00:00 (39/136): filesystem-3.18-2.fc37.x86_64.rpm 18 MB/s | 1.1 MB 00:00 (40/136): file-libs-5.42-4.fc37.x86_64.rpm 9.2 MB/s | 676 kB 00:00 (41/136): gawk-5.1.1-4.fc37.x86_64.rpm 38 MB/s | 1.0 MB 00:00 (42/136): gdbm-libs-1.23-2.fc37.x86_64.rpm 3.3 MB/s | 56 kB 00:00 (43/136): glib2-2.74.0-1.fc38.x86_64.rpm 43 MB/s | 2.7 MB 00:00 (44/136): glibc-2.36.9000-7.fc38.x86_64.rpm 31 MB/s | 2.0 MB 00:00 (45/136): glibc-common-2.36.9000-7.fc38.x86_64. 16 MB/s | 293 kB 00:00 (46/136): glibc-minimal-langpack-2.36.9000-7.fc 1.0 MB/s | 14 kB 00:00 (47/136): gmp-6.2.1-3.fc37.x86_64.rpm 17 MB/s | 315 kB 00:00 (48/136): gnutls-3.7.7-1.fc37.x86_64.rpm 38 MB/s | 1.1 MB 00:00 (49/136): gpgme-1.17.0-4.fc37.x86_64.rpm 12 MB/s | 210 kB 00:00 (50/136): gnupg2-2.3.7-3.fc37.x86_64.rpm 35 MB/s | 2.5 MB 00:00 (51/136): grep-3.8-1.fc38.x86_64.rpm 16 MB/s | 292 kB 00:00 (52/136): ima-evm-utils-1.4-6.fc37.x86_64.rpm 4.2 MB/s | 63 kB 00:00 (53/136): json-c-0.16-2.fc37.x86_64.rpm 2.8 MB/s | 41 kB 00:00 (54/136): keyutils-libs-1.6.1-5.fc37.x86_64.rpm 2.1 MB/s | 31 kB 00:00 (55/136): krb5-libs-1.19.2-11.fc37.1.x86_64.rpm 32 MB/s | 727 kB 00:00 (56/136): libacl-2.3.1-4.fc37.x86_64.rpm 1.5 MB/s | 23 kB 00:00 (57/136): libassuan-2.5.5-5.fc37.x86_64.rpm 3.9 MB/s | 67 kB 00:00 (58/136): libarchive-3.6.1-2.fc37.x86_64.rpm 20 MB/s | 397 kB 00:00 (59/136): libattr-2.5.1-5.fc37.x86_64.rpm 1.2 MB/s | 18 kB 00:00 (60/136): libb2-0.98.1-7.fc37.x86_64.rpm 1.7 MB/s | 25 kB 00:00 (61/136): libcap-2.48-5.fc37.x86_64.rpm 4.4 MB/s | 67 kB 00:00 (62/136): libbrotli-1.0.9-9.fc37.x86_64.rpm 16 MB/s | 315 kB 00:00 (63/136): libcap-ng-0.8.3-3.fc37.x86_64.rpm 2.2 MB/s | 33 kB 00:00 (64/136): libcom_err-1.46.5-3.fc37.x86_64.rpm 1.8 MB/s | 25 kB 00:00 (65/136): libcomps-0.1.18-4.fc37.x86_64.rpm 5.1 MB/s | 76 kB 00:00 (66/136): libcurl-7.85.0-1.fc38.x86_64.rpm 15 MB/s | 304 kB 00:00 (67/136): findutils-4.9.0-2.fc37.x86_64.rpm 1.3 MB/s | 492 kB 00:00 (68/136): libdnf-0.68.0-1.fc38.x86_64.rpm 31 MB/s | 673 kB 00:00 (69/136): libevent-2.1.12-7.fc37.x86_64.rpm 14 MB/s | 261 kB 00:00 (70/136): libffi-3.4.2-9.fc37.x86_64.rpm 2.5 MB/s | 37 kB 00:00 (71/136): libfsverity-1.4-8.fc37.x86_64.rpm 1.3 MB/s | 19 kB 00:00 (72/136): libgcc-12.2.1-2.fc38.x86_64.rpm 6.8 MB/s | 106 kB 00:00 (73/136): libgomp-12.2.1-2.fc38.x86_64.rpm 14 MB/s | 293 kB 00:00 (74/136): libgcrypt-1.10.1-4.fc37.x86_64.rpm 16 MB/s | 512 kB 00:00 (75/136): libgpg-error-1.45-2.fc37.x86_64.rpm 11 MB/s | 227 kB 00:00 (76/136): libidn2-2.3.3-2.fc37.x86_64.rpm 7.1 MB/s | 113 kB 00:00 (77/136): libksba-1.6.1-1.fc38.x86_64.rpm 8.9 MB/s | 158 kB 00:00 (78/136): libmodulemd-2.14.0-4.fc37.x86_64.rpm 13 MB/s | 234 kB 00:00 (79/136): libnghttp2-1.49.0-1.fc38.x86_64.rpm 4.9 MB/s | 74 kB 00:00 (80/136): libnsl2-2.0.0-4.fc37.x86_64.rpm 1.8 MB/s | 30 kB 00:00 (81/136): libpsl-0.21.1-6.fc37.x86_64.rpm 4.0 MB/s | 63 kB 00:00 (82/136): librepo-1.14.4-1.fc38.x86_64.rpm 5.8 MB/s | 94 kB 00:00 (83/136): libreport-filesystem-2.17.4-1.fc38.no 991 kB/s | 14 kB 00:00 (84/136): libselinux-3.4-5.fc37.x86_64.rpm 5.7 MB/s | 86 kB 00:00 (85/136): libsemanage-3.4-5.fc37.x86_64.rpm 7.7 MB/s | 120 kB 00:00 (86/136): libsigsegv-2.14-3.fc37.x86_64.rpm 1.6 MB/s | 27 kB 00:00 (87/136): libsepol-3.4-3.fc37.x86_64.rpm 15 MB/s | 322 kB 00:00 (88/136): libsolv-0.7.22-3.fc37.x86_64.rpm 19 MB/s | 405 kB 00:00 (89/136): libssh-0.10.4-1.fc38.x86_64.rpm 12 MB/s | 210 kB 00:00 (90/136): libssh-config-0.10.4-1.fc38.noarch.rp 593 kB/s | 8.4 kB 00:00 (91/136): libstdc++-12.2.1-2.fc38.x86_64.rpm 34 MB/s | 800 kB 00:00 (92/136): libtasn1-4.18.0-3.fc37.x86_64.rpm 4.3 MB/s | 75 kB 00:00 (93/136): libtirpc-1.3.3-0.fc37.x86_64.rpm 5.2 MB/s | 93 kB 00:00 (94/136): libverto-0.3.2-4.fc37.x86_64.rpm 1.3 MB/s | 21 kB 00:00 (95/136): libxcrypt-4.4.28-3.fc38.x86_64.rpm 6.1 MB/s | 117 kB 00:00 (96/136): libunistring-1.0-2.fc37.x86_64.rpm 25 MB/s | 549 kB 00:00 (97/136): libyaml-0.2.5-8.fc37.x86_64.rpm 4.0 MB/s | 60 kB 00:00 (98/136): libzstd-1.5.2-3.fc37.x86_64.rpm 15 MB/s | 294 kB 00:00 (99/136): libxml2-2.9.14-3.fc37.x86_64.rpm 25 MB/s | 752 kB 00:00 (100/136): lua-libs-5.4.4-4.fc37.x86_64.rpm 12 MB/s | 217 kB 00:00 (101/136): lz4-libs-1.9.3-5.fc37.x86_64.rpm 4.6 MB/s | 70 kB 00:00 (102/136): mpdecimal-2.5.1-4.fc37.x86_64.rpm 6.6 MB/s | 102 kB 00:00 (103/136): ncurses-base-6.3-3.20220501.fc37.noa 5.5 MB/s | 86 kB 00:00 (104/136): mpfr-4.1.0-10.fc37.x86_64.rpm 16 MB/s | 331 kB 00:00 (105/136): ncurses-libs-6.3-3.20220501.fc37.x86 16 MB/s | 329 kB 00:00 (106/136): npth-1.6-10.fc38.x86_64.rpm 1.5 MB/s | 24 kB 00:00 (107/136): nettle-3.8-2.fc37.x86_64.rpm 21 MB/s | 414 kB 00:00 (108/136): openldap-2.6.3-1.fc38.x86_64.rpm 13 MB/s | 254 kB 00:00 (109/136): p11-kit-0.24.1-3.fc37.x86_64.rpm 18 MB/s | 376 kB 00:00 (110/136): p11-kit-trust-0.24.1-3.fc37.x86_64.r 7.4 MB/s | 138 kB 00:00 (111/136): pcre2-10.40-1.fc37.1.x86_64.rpm 13 MB/s | 236 kB 00:00 (112/136): pcre2-syntax-10.40-1.fc37.1.noarch.r 8.5 MB/s | 142 kB 00:00 (113/136): openssl-libs-3.0.5-5.fc38.x86_64.rpm 41 MB/s | 2.1 MB 00:00 (114/136): popt-1.19-1.fc38.x86_64.rpm 4.4 MB/s | 66 kB 00:00 (115/136): publicsuffix-list-dafsa-20210518-5.f 3.9 MB/s | 58 kB 00:00 (116/136): python3-3.11.0~rc2-1.fc38.x86_64.rpm 1.8 MB/s | 27 kB 00:00 (117/136): python3-dateutil-2.8.2-4.fc37.noarch 20 MB/s | 361 kB 00:00 (118/136): python3-dbus-1.2.18-5.fc37.x86_64.rp 9.3 MB/s | 156 kB 00:00 (119/136): python3-distro-1.7.0-3.fc37.noarch.r 3.3 MB/s | 48 kB 00:00 (120/136): python3-dnf-4.14.0-1.fc38.noarch.rpm 28 MB/s | 607 kB 00:00 (121/136): python3-hawkey-0.68.0-1.fc38.x86_64. 6.4 MB/s | 108 kB 00:00 (122/136): python3-gpg-1.17.0-4.fc37.x86_64.rpm 14 MB/s | 298 kB 00:00 (123/136): python3-libcomps-0.1.18-4.fc37.x86_6 3.3 MB/s | 48 kB 00:00 (124/136): python3-libdnf-0.68.0-1.fc38.x86_64. 25 MB/s | 818 kB 00:00 (125/136): readline-8.1-7.fc37.x86_64.rpm 9.3 MB/s | 211 kB 00:00 (126/136): setup-2.14.2-1.fc38.noarch.rpm 8.6 MB/s | 151 kB 00:00 (127/136): sed-4.8-11.fc37.x86_64.rpm 14 MB/s | 306 kB 00:00 (128/136): sqlite-libs-3.39.3-2.fc38.x86_64.rpm 12 MB/s | 658 kB 00:00 (129/136): shadow-utils-4.12.3-2.fc38.x86_64.rp 19 MB/s | 1.3 MB 00:00 (130/136): systemd-libs-251.4-53.fc38.x86_64.rp 23 MB/s | 620 kB 00:00 (131/136): tpm2-tss-3.2.0-3.fc37.x86_64.rpm 23 MB/s | 600 kB 00:00 (132/136): xz-libs-5.2.6-1.fc38.x86_64.rpm 4.2 MB/s | 92 kB 00:00 (133/136): tzdata-2022c-1.fc38.noarch.rpm 19 MB/s | 717 kB 00:00 (134/136): zchunk-libs-1.2.3-1.fc38.x86_64.rpm 3.2 MB/s | 51 kB 00:00 (135/136): zlib-1.2.12-5.fc38.x86_64.rpm 5.6 MB/s | 94 kB 00:00 (136/136): python3-libs-3.11.0~rc2-1.fc38.x86_6 48 MB/s | 9.6 MB 00:00 -------------------------------------------------------------------------------- Total 41 MB/s | 55 MB 00:01 fedora 1.6 MB/s | 1.6 kB 00:00 Importing GPG key 0xEB10B464: Userid : "Fedora (38) " Fingerprint: 6A51 BBAB BA3D 5467 B617 1221 809A 8D7C EB10 B464 From : /usr/share/distribution-gpg-keys/fedora/RPM-GPG-KEY-fedora-38-primary Key imported successfully fedora 1.6 MB/s | 1.6 kB 00:00 GPG key at file:///usr/share/distribution-gpg-keys/fedora/RPM-GPG-KEY-fedora-38-primary (0xEB10B464) is already installed fedora 1.6 MB/s | 1.6 kB 00:00 Importing GPG key 0x5323552A: Userid : "Fedora (37) " Fingerprint: ACB5 EE4E 831C 74BB 7C16 8D27 F55A D3FB 5323 552A From : /usr/share/distribution-gpg-keys/fedora/RPM-GPG-KEY-fedora-37-primary Key imported successfully Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Running scriptlet: filesystem-3.18-2.fc37.x86_64 1/1 Preparing : 1/1 Installing : libgcc-12.2.1-2.fc38.x86_64 1/136 Running scriptlet: libgcc-12.2.1-2.fc38.x86_64 1/136 Installing : crypto-policies-20220824-2.git2187e9c.fc38.noarc 2/136 Running scriptlet: crypto-policies-20220824-2.git2187e9c.fc38.noarc 2/136 Installing : tzdata-2022c-1.fc38.noarch 3/136 Installing : fedora-release-identity-basic-38-0.4.noarch 4/136 Installing : publicsuffix-list-dafsa-20210518-5.fc37.noarch 5/136 Installing : pcre2-syntax-10.40-1.fc37.1.noarch 6/136 Installing : ncurses-base-6.3-3.20220501.fc37.noarch 7/136 Installing : libssh-config-0.10.4-1.fc38.noarch 8/136 Installing : libreport-filesystem-2.17.4-1.fc38.noarch 9/136 Installing : dnf-data-4.14.0-1.fc38.noarch 10/136 warning: /etc/dnf/dnf.conf created as /etc/dnf/dnf.conf.rpmnew Installing : fedora-gpg-keys-38-0.3.noarch 11/136 Installing : fedora-release-38-0.4.noarch 12/136 Installing : fedora-release-common-38-0.4.noarch 13/136 Installing : fedora-repos-rawhide-38-0.3.noarch 14/136 Installing : fedora-repos-38-0.3.noarch 15/136 Installing : setup-2.14.2-1.fc38.noarch 16/136 warning: /etc/hosts created as /etc/hosts.rpmnew Running scriptlet: setup-2.14.2-1.fc38.noarch 16/136 Installing : filesystem-3.18-2.fc37.x86_64 17/136 Installing : basesystem-11-14.fc37.noarch 18/136 Installing : glibc-minimal-langpack-2.36.9000-7.fc38.x86_64 19/136 Installing : glibc-common-2.36.9000-7.fc38.x86_64 20/136 Running scriptlet: glibc-2.36.9000-7.fc38.x86_64 21/136 Installing : glibc-2.36.9000-7.fc38.x86_64 21/136 Running scriptlet: glibc-2.36.9000-7.fc38.x86_64 21/136 Installing : ncurses-libs-6.3-3.20220501.fc37.x86_64 22/136 Installing : bash-5.1.16-3.fc37.x86_64 23/136 Running scriptlet: bash-5.1.16-3.fc37.x86_64 23/136 Installing : zlib-1.2.12-5.fc38.x86_64 24/136 Installing : bzip2-libs-1.0.8-12.fc37.x86_64 25/136 Installing : xz-libs-5.2.6-1.fc38.x86_64 26/136 Installing : libzstd-1.5.2-3.fc37.x86_64 27/136 Installing : sqlite-libs-3.39.3-2.fc38.x86_64 28/136 Installing : libcap-2.48-5.fc37.x86_64 29/136 Installing : gmp-1:6.2.1-3.fc37.x86_64 30/136 Installing : libgpg-error-1.45-2.fc37.x86_64 31/136 Installing : popt-1.19-1.fc38.x86_64 32/136 Installing : libxml2-2.9.14-3.fc37.x86_64 33/136 Installing : libstdc++-12.2.1-2.fc38.x86_64 34/136 Installing : lua-libs-5.4.4-4.fc37.x86_64 35/136 Installing : elfutils-libelf-0.187-8.fc38.x86_64 36/136 Installing : file-libs-5.42-4.fc37.x86_64 37/136 Installing : readline-8.1-7.fc37.x86_64 38/136 Installing : libuuid-2.38.1-2.fc38.x86_64 39/136 Installing : libattr-2.5.1-5.fc37.x86_64 40/136 Installing : libacl-2.3.1-4.fc37.x86_64 41/136 Installing : libffi-3.4.2-9.fc37.x86_64 42/136 Installing : p11-kit-0.24.1-3.fc37.x86_64 43/136 Installing : libunistring-1.0-2.fc37.x86_64 44/136 Installing : libidn2-2.3.3-2.fc37.x86_64 45/136 Installing : libxcrypt-4.4.28-3.fc38.x86_64 46/136 Installing : pcre2-10.40-1.fc37.1.x86_64 47/136 Installing : libassuan-2.5.5-5.fc37.x86_64 48/136 Installing : libsmartcols-2.38.1-2.fc38.x86_64 49/136 Installing : expat-2.4.8-2.fc37.x86_64 50/136 Installing : gdbm-libs-1:1.23-2.fc37.x86_64 51/136 Installing : json-c-0.16-2.fc37.x86_64 52/136 Installing : keyutils-libs-1.6.1-5.fc37.x86_64 53/136 Installing : libcom_err-1.46.5-3.fc37.x86_64 54/136 Installing : libgomp-12.2.1-2.fc38.x86_64 55/136 Installing : libsepol-3.4-3.fc37.x86_64 56/136 Installing : libselinux-3.4-5.fc37.x86_64 57/136 Installing : sed-4.8-11.fc37.x86_64 58/136 Installing : libtasn1-4.18.0-3.fc37.x86_64 59/136 Installing : lz4-libs-1.9.3-5.fc37.x86_64 60/136 Installing : systemd-libs-251.4-53.fc38.x86_64 61/136 Installing : dbus-libs-1:1.14.0-5.fc38.x86_64 62/136 Installing : findutils-1:4.9.0-2.fc37.x86_64 63/136 Installing : libb2-0.98.1-7.fc37.x86_64 64/136 Installing : cyrus-sasl-lib-2.1.28-8.fc38.x86_64 65/136 Installing : libcomps-0.1.18-4.fc37.x86_64 66/136 Installing : grep-3.8-1.fc38.x86_64 67/136 Installing : libpsl-0.21.1-6.fc37.x86_64 68/136 Installing : libblkid-2.38.1-2.fc38.x86_64 69/136 Installing : libmount-2.38.1-2.fc38.x86_64 70/136 Installing : mpdecimal-2.5.1-4.fc37.x86_64 71/136 Installing : libgcrypt-1.10.1-4.fc37.x86_64 72/136 Installing : libksba-1.6.1-1.fc38.x86_64 73/136 Installing : mpfr-4.1.0-10.fc37.x86_64 74/136 Installing : nettle-3.8-2.fc37.x86_64 75/136 Installing : elfutils-default-yama-scope-0.187-8.fc38.noarch 76/136 Running scriptlet: elfutils-default-yama-scope-0.187-8.fc38.noarch 76/136 Installing : elfutils-libs-0.187-8.fc38.x86_64 77/136 Installing : alternatives-1.19-3.fc37.x86_64 78/136 Installing : p11-kit-trust-0.24.1-3.fc37.x86_64 79/136 Running scriptlet: p11-kit-trust-0.24.1-3.fc37.x86_64 79/136 Installing : gnutls-3.7.7-1.fc37.x86_64 80/136 Installing : glib2-2.74.0-1.fc38.x86_64 81/136 Installing : libbrotli-1.0.9-9.fc37.x86_64 82/136 Installing : libcap-ng-0.8.3-3.fc37.x86_64 83/136 Installing : audit-libs-3.0.9-1.fc38.x86_64 84/136 Installing : libsemanage-3.4-5.fc37.x86_64 85/136 Installing : shadow-utils-2:4.12.3-2.fc38.x86_64 86/136 Installing : libnghttp2-1.49.0-1.fc38.x86_64 87/136 Installing : libsigsegv-2.14-3.fc37.x86_64 88/136 Installing : gawk-5.1.1-4.fc37.x86_64 89/136 Installing : libverto-0.3.2-4.fc37.x86_64 90/136 Installing : libyaml-0.2.5-8.fc37.x86_64 91/136 Installing : npth-1.6-10.fc38.x86_64 92/136 Installing : coreutils-common-9.1-8.fc38.x86_64 93/136 Installing : openssl-libs-1:3.0.5-5.fc38.x86_64 94/136 Installing : coreutils-9.1-8.fc38.x86_64 95/136 Running scriptlet: ca-certificates-2022.2.54-5.fc37.noarch 96/136 Installing : ca-certificates-2022.2.54-5.fc37.noarch 96/136 Running scriptlet: ca-certificates-2022.2.54-5.fc37.noarch 96/136 Installing : krb5-libs-1.19.2-11.fc37.1.x86_64 97/136 Installing : libtirpc-1.3.3-0.fc37.x86_64 98/136 Installing : libfsverity-1.4-8.fc37.x86_64 99/136 Installing : zchunk-libs-1.2.3-1.fc38.x86_64 100/136 Installing : libnsl2-2.0.0-4.fc37.x86_64 101/136 Installing : libssh-0.10.4-1.fc38.x86_64 102/136 Installing : python-pip-wheel-22.2.2-2.fc38.noarch 103/136 Installing : libarchive-3.6.1-2.fc37.x86_64 104/136 Installing : libevent-2.1.12-7.fc37.x86_64 105/136 Installing : openldap-2.6.3-1.fc38.x86_64 106/136 Installing : libcurl-7.85.0-1.fc38.x86_64 107/136 Installing : gnupg2-2.3.7-3.fc37.x86_64 108/136 Installing : gpgme-1.17.0-4.fc37.x86_64 109/136 Installing : librepo-1.14.4-1.fc38.x86_64 110/136 Installing : curl-7.85.0-1.fc38.x86_64 111/136 Running scriptlet: rpm-4.18.0-1.fc38.x86_64 112/136 Installing : rpm-4.18.0-1.fc38.x86_64 112/136 Installing : rpm-libs-4.18.0-1.fc38.x86_64 113/136 Installing : libmodulemd-2.14.0-4.fc37.x86_64 114/136 Installing : libsolv-0.7.22-3.fc37.x86_64 115/136 Installing : libdnf-0.68.0-1.fc38.x86_64 116/136 Installing : rpm-build-libs-4.18.0-1.fc38.x86_64 117/136 Running scriptlet: tpm2-tss-3.2.0-3.fc37.x86_64 118/136 Installing : tpm2-tss-3.2.0-3.fc37.x86_64 118/136 Installing : ima-evm-utils-1.4-6.fc37.x86_64 119/136 Installing : rpm-sign-libs-4.18.0-1.fc38.x86_64 120/136 Installing : python-setuptools-wheel-65.3.0-1.fc38.noarch 121/136 Installing : python3-3.11.0~rc2-1.fc38.x86_64 122/136 Installing : python3-libs-3.11.0~rc2-1.fc38.x86_64 123/136 Installing : python3-libdnf-0.68.0-1.fc38.x86_64 124/136 Installing : python3-hawkey-0.68.0-1.fc38.x86_64 125/136 Installing : python3-dbus-1.2.18-5.fc37.x86_64 126/136 Installing : python3-libcomps-0.1.18-4.fc37.x86_64 127/136 Installing : python3-rpm-4.18.0-1.fc38.x86_64 128/136 Installing : python3-six-1.16.0-8.fc37.noarch 129/136 Installing : python3-dateutil-1:2.8.2-4.fc37.noarch 130/136 Installing : python3-distro-1.7.0-3.fc37.noarch 131/136 Installing : python3-gpg-1.17.0-4.fc37.x86_64 132/136 Installing : python3-dnf-4.14.0-1.fc38.noarch 133/136 Installing : python3-dnf-plugins-core-4.3.1-1.fc38.noarch 134/136 Installing : dnf-plugins-core-4.3.1-1.fc38.noarch 135/136 Installing : dnf-4.14.0-1.fc38.noarch 136/136 Running scriptlet: dnf-4.14.0-1.fc38.noarch 136/136 Running scriptlet: filesystem-3.18-2.fc37.x86_64 136/136 Running scriptlet: ca-certificates-2022.2.54-5.fc37.noarch 136/136 Running scriptlet: rpm-4.18.0-1.fc38.x86_64 136/136 Running scriptlet: dnf-4.14.0-1.fc38.noarch 136/136 Verifying : audit-libs-3.0.9-1.fc38.x86_64 1/136 Verifying : dnf-plugins-core-4.3.1-1.fc38.noarch 2/136 Verifying : libblkid-2.38.1-2.fc38.x86_64 3/136 Verifying : libmount-2.38.1-2.fc38.x86_64 4/136 Verifying : libsmartcols-2.38.1-2.fc38.x86_64 5/136 Verifying : libuuid-2.38.1-2.fc38.x86_64 6/136 Verifying : python-pip-wheel-22.2.2-2.fc38.noarch 7/136 Verifying : python-setuptools-wheel-65.3.0-1.fc38.noarch 8/136 Verifying : python3-dnf-plugins-core-4.3.1-1.fc38.noarch 9/136 Verifying : python3-rpm-4.18.0-1.fc38.x86_64 10/136 Verifying : python3-six-1.16.0-8.fc37.noarch 11/136 Verifying : rpm-4.18.0-1.fc38.x86_64 12/136 Verifying : rpm-build-libs-4.18.0-1.fc38.x86_64 13/136 Verifying : rpm-libs-4.18.0-1.fc38.x86_64 14/136 Verifying : rpm-sign-libs-4.18.0-1.fc38.x86_64 15/136 Verifying : alternatives-1.19-3.fc37.x86_64 16/136 Verifying : basesystem-11-14.fc37.noarch 17/136 Verifying : bash-5.1.16-3.fc37.x86_64 18/136 Verifying : bzip2-libs-1.0.8-12.fc37.x86_64 19/136 Verifying : ca-certificates-2022.2.54-5.fc37.noarch 20/136 Verifying : coreutils-9.1-8.fc38.x86_64 21/136 Verifying : coreutils-common-9.1-8.fc38.x86_64 22/136 Verifying : crypto-policies-20220824-2.git2187e9c.fc38.noarc 23/136 Verifying : curl-7.85.0-1.fc38.x86_64 24/136 Verifying : cyrus-sasl-lib-2.1.28-8.fc38.x86_64 25/136 Verifying : dbus-libs-1:1.14.0-5.fc38.x86_64 26/136 Verifying : dnf-4.14.0-1.fc38.noarch 27/136 Verifying : dnf-data-4.14.0-1.fc38.noarch 28/136 Verifying : elfutils-default-yama-scope-0.187-8.fc38.noarch 29/136 Verifying : elfutils-libelf-0.187-8.fc38.x86_64 30/136 Verifying : elfutils-libs-0.187-8.fc38.x86_64 31/136 Verifying : expat-2.4.8-2.fc37.x86_64 32/136 Verifying : fedora-gpg-keys-38-0.3.noarch 33/136 Verifying : fedora-release-38-0.4.noarch 34/136 Verifying : fedora-release-common-38-0.4.noarch 35/136 Verifying : fedora-release-identity-basic-38-0.4.noarch 36/136 Verifying : fedora-repos-38-0.3.noarch 37/136 Verifying : fedora-repos-rawhide-38-0.3.noarch 38/136 Verifying : file-libs-5.42-4.fc37.x86_64 39/136 Verifying : filesystem-3.18-2.fc37.x86_64 40/136 Verifying : findutils-1:4.9.0-2.fc37.x86_64 41/136 Verifying : gawk-5.1.1-4.fc37.x86_64 42/136 Verifying : gdbm-libs-1:1.23-2.fc37.x86_64 43/136 Verifying : glib2-2.74.0-1.fc38.x86_64 44/136 Verifying : glibc-2.36.9000-7.fc38.x86_64 45/136 Verifying : glibc-common-2.36.9000-7.fc38.x86_64 46/136 Verifying : glibc-minimal-langpack-2.36.9000-7.fc38.x86_64 47/136 Verifying : gmp-1:6.2.1-3.fc37.x86_64 48/136 Verifying : gnupg2-2.3.7-3.fc37.x86_64 49/136 Verifying : gnutls-3.7.7-1.fc37.x86_64 50/136 Verifying : gpgme-1.17.0-4.fc37.x86_64 51/136 Verifying : grep-3.8-1.fc38.x86_64 52/136 Verifying : ima-evm-utils-1.4-6.fc37.x86_64 53/136 Verifying : json-c-0.16-2.fc37.x86_64 54/136 Verifying : keyutils-libs-1.6.1-5.fc37.x86_64 55/136 Verifying : krb5-libs-1.19.2-11.fc37.1.x86_64 56/136 Verifying : libacl-2.3.1-4.fc37.x86_64 57/136 Verifying : libarchive-3.6.1-2.fc37.x86_64 58/136 Verifying : libassuan-2.5.5-5.fc37.x86_64 59/136 Verifying : libattr-2.5.1-5.fc37.x86_64 60/136 Verifying : libb2-0.98.1-7.fc37.x86_64 61/136 Verifying : libbrotli-1.0.9-9.fc37.x86_64 62/136 Verifying : libcap-2.48-5.fc37.x86_64 63/136 Verifying : libcap-ng-0.8.3-3.fc37.x86_64 64/136 Verifying : libcom_err-1.46.5-3.fc37.x86_64 65/136 Verifying : libcomps-0.1.18-4.fc37.x86_64 66/136 Verifying : libcurl-7.85.0-1.fc38.x86_64 67/136 Verifying : libdnf-0.68.0-1.fc38.x86_64 68/136 Verifying : libevent-2.1.12-7.fc37.x86_64 69/136 Verifying : libffi-3.4.2-9.fc37.x86_64 70/136 Verifying : libfsverity-1.4-8.fc37.x86_64 71/136 Verifying : libgcc-12.2.1-2.fc38.x86_64 72/136 Verifying : libgcrypt-1.10.1-4.fc37.x86_64 73/136 Verifying : libgomp-12.2.1-2.fc38.x86_64 74/136 Verifying : libgpg-error-1.45-2.fc37.x86_64 75/136 Verifying : libidn2-2.3.3-2.fc37.x86_64 76/136 Verifying : libksba-1.6.1-1.fc38.x86_64 77/136 Verifying : libmodulemd-2.14.0-4.fc37.x86_64 78/136 Verifying : libnghttp2-1.49.0-1.fc38.x86_64 79/136 Verifying : libnsl2-2.0.0-4.fc37.x86_64 80/136 Verifying : libpsl-0.21.1-6.fc37.x86_64 81/136 Verifying : librepo-1.14.4-1.fc38.x86_64 82/136 Verifying : libreport-filesystem-2.17.4-1.fc38.noarch 83/136 Verifying : libselinux-3.4-5.fc37.x86_64 84/136 Verifying : libsemanage-3.4-5.fc37.x86_64 85/136 Verifying : libsepol-3.4-3.fc37.x86_64 86/136 Verifying : libsigsegv-2.14-3.fc37.x86_64 87/136 Verifying : libsolv-0.7.22-3.fc37.x86_64 88/136 Verifying : libssh-0.10.4-1.fc38.x86_64 89/136 Verifying : libssh-config-0.10.4-1.fc38.noarch 90/136 Verifying : libstdc++-12.2.1-2.fc38.x86_64 91/136 Verifying : libtasn1-4.18.0-3.fc37.x86_64 92/136 Verifying : libtirpc-1.3.3-0.fc37.x86_64 93/136 Verifying : libunistring-1.0-2.fc37.x86_64 94/136 Verifying : libverto-0.3.2-4.fc37.x86_64 95/136 Verifying : libxcrypt-4.4.28-3.fc38.x86_64 96/136 Verifying : libxml2-2.9.14-3.fc37.x86_64 97/136 Verifying : libyaml-0.2.5-8.fc37.x86_64 98/136 Verifying : libzstd-1.5.2-3.fc37.x86_64 99/136 Verifying : lua-libs-5.4.4-4.fc37.x86_64 100/136 Verifying : lz4-libs-1.9.3-5.fc37.x86_64 101/136 Verifying : mpdecimal-2.5.1-4.fc37.x86_64 102/136 Verifying : mpfr-4.1.0-10.fc37.x86_64 103/136 Verifying : ncurses-base-6.3-3.20220501.fc37.noarch 104/136 Verifying : ncurses-libs-6.3-3.20220501.fc37.x86_64 105/136 Verifying : nettle-3.8-2.fc37.x86_64 106/136 Verifying : npth-1.6-10.fc38.x86_64 107/136 Verifying : openldap-2.6.3-1.fc38.x86_64 108/136 Verifying : openssl-libs-1:3.0.5-5.fc38.x86_64 109/136 Verifying : p11-kit-0.24.1-3.fc37.x86_64 110/136 Verifying : p11-kit-trust-0.24.1-3.fc37.x86_64 111/136 Verifying : pcre2-10.40-1.fc37.1.x86_64 112/136 Verifying : pcre2-syntax-10.40-1.fc37.1.noarch 113/136 Verifying : popt-1.19-1.fc38.x86_64 114/136 Verifying : publicsuffix-list-dafsa-20210518-5.fc37.noarch 115/136 Verifying : python3-3.11.0~rc2-1.fc38.x86_64 116/136 Verifying : python3-dateutil-1:2.8.2-4.fc37.noarch 117/136 Verifying : python3-dbus-1.2.18-5.fc37.x86_64 118/136 Verifying : python3-distro-1.7.0-3.fc37.noarch 119/136 Verifying : python3-dnf-4.14.0-1.fc38.noarch 120/136 Verifying : python3-gpg-1.17.0-4.fc37.x86_64 121/136 Verifying : python3-hawkey-0.68.0-1.fc38.x86_64 122/136 Verifying : python3-libcomps-0.1.18-4.fc37.x86_64 123/136 Verifying : python3-libdnf-0.68.0-1.fc38.x86_64 124/136 Verifying : python3-libs-3.11.0~rc2-1.fc38.x86_64 125/136 Verifying : readline-8.1-7.fc37.x86_64 126/136 Verifying : sed-4.8-11.fc37.x86_64 127/136 Verifying : setup-2.14.2-1.fc38.noarch 128/136 Verifying : shadow-utils-2:4.12.3-2.fc38.x86_64 129/136 Verifying : sqlite-libs-3.39.3-2.fc38.x86_64 130/136 Verifying : systemd-libs-251.4-53.fc38.x86_64 131/136 Verifying : tpm2-tss-3.2.0-3.fc37.x86_64 132/136 Verifying : tzdata-2022c-1.fc38.noarch 133/136 Verifying : xz-libs-5.2.6-1.fc38.x86_64 134/136 Verifying : zchunk-libs-1.2.3-1.fc38.x86_64 135/136 Verifying : zlib-1.2.12-5.fc38.x86_64 136/136 Installed products updated. Installed: alternatives-1.19-3.fc37.x86_64 audit-libs-3.0.9-1.fc38.x86_64 basesystem-11-14.fc37.noarch bash-5.1.16-3.fc37.x86_64 bzip2-libs-1.0.8-12.fc37.x86_64 ca-certificates-2022.2.54-5.fc37.noarch coreutils-9.1-8.fc38.x86_64 coreutils-common-9.1-8.fc38.x86_64 crypto-policies-20220824-2.git2187e9c.fc38.noarch curl-7.85.0-1.fc38.x86_64 cyrus-sasl-lib-2.1.28-8.fc38.x86_64 dbus-libs-1:1.14.0-5.fc38.x86_64 dnf-4.14.0-1.fc38.noarch dnf-data-4.14.0-1.fc38.noarch dnf-plugins-core-4.3.1-1.fc38.noarch elfutils-default-yama-scope-0.187-8.fc38.noarch elfutils-libelf-0.187-8.fc38.x86_64 elfutils-libs-0.187-8.fc38.x86_64 expat-2.4.8-2.fc37.x86_64 fedora-gpg-keys-38-0.3.noarch fedora-release-38-0.4.noarch fedora-release-common-38-0.4.noarch fedora-release-identity-basic-38-0.4.noarch fedora-repos-38-0.3.noarch fedora-repos-rawhide-38-0.3.noarch file-libs-5.42-4.fc37.x86_64 filesystem-3.18-2.fc37.x86_64 findutils-1:4.9.0-2.fc37.x86_64 gawk-5.1.1-4.fc37.x86_64 gdbm-libs-1:1.23-2.fc37.x86_64 glib2-2.74.0-1.fc38.x86_64 glibc-2.36.9000-7.fc38.x86_64 glibc-common-2.36.9000-7.fc38.x86_64 glibc-minimal-langpack-2.36.9000-7.fc38.x86_64 gmp-1:6.2.1-3.fc37.x86_64 gnupg2-2.3.7-3.fc37.x86_64 gnutls-3.7.7-1.fc37.x86_64 gpgme-1.17.0-4.fc37.x86_64 grep-3.8-1.fc38.x86_64 ima-evm-utils-1.4-6.fc37.x86_64 json-c-0.16-2.fc37.x86_64 keyutils-libs-1.6.1-5.fc37.x86_64 krb5-libs-1.19.2-11.fc37.1.x86_64 libacl-2.3.1-4.fc37.x86_64 libarchive-3.6.1-2.fc37.x86_64 libassuan-2.5.5-5.fc37.x86_64 libattr-2.5.1-5.fc37.x86_64 libb2-0.98.1-7.fc37.x86_64 libblkid-2.38.1-2.fc38.x86_64 libbrotli-1.0.9-9.fc37.x86_64 libcap-2.48-5.fc37.x86_64 libcap-ng-0.8.3-3.fc37.x86_64 libcom_err-1.46.5-3.fc37.x86_64 libcomps-0.1.18-4.fc37.x86_64 libcurl-7.85.0-1.fc38.x86_64 libdnf-0.68.0-1.fc38.x86_64 libevent-2.1.12-7.fc37.x86_64 libffi-3.4.2-9.fc37.x86_64 libfsverity-1.4-8.fc37.x86_64 libgcc-12.2.1-2.fc38.x86_64 libgcrypt-1.10.1-4.fc37.x86_64 libgomp-12.2.1-2.fc38.x86_64 libgpg-error-1.45-2.fc37.x86_64 libidn2-2.3.3-2.fc37.x86_64 libksba-1.6.1-1.fc38.x86_64 libmodulemd-2.14.0-4.fc37.x86_64 libmount-2.38.1-2.fc38.x86_64 libnghttp2-1.49.0-1.fc38.x86_64 libnsl2-2.0.0-4.fc37.x86_64 libpsl-0.21.1-6.fc37.x86_64 librepo-1.14.4-1.fc38.x86_64 libreport-filesystem-2.17.4-1.fc38.noarch libselinux-3.4-5.fc37.x86_64 libsemanage-3.4-5.fc37.x86_64 libsepol-3.4-3.fc37.x86_64 libsigsegv-2.14-3.fc37.x86_64 libsmartcols-2.38.1-2.fc38.x86_64 libsolv-0.7.22-3.fc37.x86_64 libssh-0.10.4-1.fc38.x86_64 libssh-config-0.10.4-1.fc38.noarch libstdc++-12.2.1-2.fc38.x86_64 libtasn1-4.18.0-3.fc37.x86_64 libtirpc-1.3.3-0.fc37.x86_64 libunistring-1.0-2.fc37.x86_64 libuuid-2.38.1-2.fc38.x86_64 libverto-0.3.2-4.fc37.x86_64 libxcrypt-4.4.28-3.fc38.x86_64 libxml2-2.9.14-3.fc37.x86_64 libyaml-0.2.5-8.fc37.x86_64 libzstd-1.5.2-3.fc37.x86_64 lua-libs-5.4.4-4.fc37.x86_64 lz4-libs-1.9.3-5.fc37.x86_64 mpdecimal-2.5.1-4.fc37.x86_64 mpfr-4.1.0-10.fc37.x86_64 ncurses-base-6.3-3.20220501.fc37.noarch ncurses-libs-6.3-3.20220501.fc37.x86_64 nettle-3.8-2.fc37.x86_64 npth-1.6-10.fc38.x86_64 openldap-2.6.3-1.fc38.x86_64 openssl-libs-1:3.0.5-5.fc38.x86_64 p11-kit-0.24.1-3.fc37.x86_64 p11-kit-trust-0.24.1-3.fc37.x86_64 pcre2-10.40-1.fc37.1.x86_64 pcre2-syntax-10.40-1.fc37.1.noarch popt-1.19-1.fc38.x86_64 publicsuffix-list-dafsa-20210518-5.fc37.noarch python-pip-wheel-22.2.2-2.fc38.noarch python-setuptools-wheel-65.3.0-1.fc38.noarch python3-3.11.0~rc2-1.fc38.x86_64 python3-dateutil-1:2.8.2-4.fc37.noarch python3-dbus-1.2.18-5.fc37.x86_64 python3-distro-1.7.0-3.fc37.noarch python3-dnf-4.14.0-1.fc38.noarch python3-dnf-plugins-core-4.3.1-1.fc38.noarch python3-gpg-1.17.0-4.fc37.x86_64 python3-hawkey-0.68.0-1.fc38.x86_64 python3-libcomps-0.1.18-4.fc37.x86_64 python3-libdnf-0.68.0-1.fc38.x86_64 python3-libs-3.11.0~rc2-1.fc38.x86_64 python3-rpm-4.18.0-1.fc38.x86_64 python3-six-1.16.0-8.fc37.noarch readline-8.1-7.fc37.x86_64 rpm-4.18.0-1.fc38.x86_64 rpm-build-libs-4.18.0-1.fc38.x86_64 rpm-libs-4.18.0-1.fc38.x86_64 rpm-sign-libs-4.18.0-1.fc38.x86_64 sed-4.8-11.fc37.x86_64 setup-2.14.2-1.fc38.noarch shadow-utils-2:4.12.3-2.fc38.x86_64 sqlite-libs-3.39.3-2.fc38.x86_64 systemd-libs-251.4-53.fc38.x86_64 tpm2-tss-3.2.0-3.fc37.x86_64 tzdata-2022c-1.fc38.noarch xz-libs-5.2.6-1.fc38.x86_64 zchunk-libs-1.2.3-1.fc38.x86_64 zlib-1.2.12-5.fc38.x86_64 Complete! Finish(bootstrap): dnf install Start(bootstrap): creating root cache Finish(bootstrap): creating root cache Finish(bootstrap): chroot init Start: chroot init INFO: mounting tmpfs at /var/lib/mock/fedora-rawhide-x86_64-1663925790.119649/root. INFO: calling preinit hooks INFO: enabled root cache INFO: enabled package manager cache Start: cleaning package manager metadata Finish: cleaning package manager metadata INFO: enabled HW Info plugin Mock Version: 3.1 INFO: Mock Version: 3.1 Start: dnf install No matches found for the following disable plugin patterns: local, spacewalk, versionlock Copr repository 40 MB/s | 14 MB 00:00 fedora 27 MB/s | 65 MB 00:02 Last metadata expiration check: 0:00:03 ago on Fri Sep 23 09:37:17 2022. Dependencies resolved. ================================================================================ Package Arch Version Repo Size ================================================================================ Installing group/module packages: bash x86_64 5.1.16-3.fc37 fedora 1.7 M bzip2 x86_64 1.0.8-12.fc37 fedora 52 k coreutils x86_64 9.1-8.fc38 fedora 1.1 M cpio x86_64 2.13-13.fc38 fedora 276 k diffutils x86_64 3.8-3.fc37 fedora 378 k fedora-release-common noarch 38-0.4 fedora 22 k findutils x86_64 1:4.9.0-2.fc37 fedora 492 k gawk x86_64 5.1.1-4.fc37 fedora 1.0 M glibc-minimal-langpack x86_64 2.36.9000-7.fc38 fedora 14 k grep x86_64 3.8-1.fc38 fedora 292 k gzip x86_64 1.12-2.fc37 fedora 166 k info x86_64 6.8-4.fc37 fedora 225 k patch x86_64 2.7.6-17.fc37 fedora 124 k redhat-rpm-config noarch 231-1.fc38 fedora 81 k rpm-build x86_64 4.18.0-1.fc38 copr_base 70 k sed x86_64 4.8-11.fc37 fedora 306 k shadow-utils x86_64 2:4.12.3-2.fc38 fedora 1.3 M tar x86_64 2:1.34-3.fc36 fedora 886 k unzip x86_64 6.0-58.fc37 fedora 182 k util-linux x86_64 2.38.1-2.fc38 copr_base 2.3 M which x86_64 2.21-35.fc37 fedora 41 k xz x86_64 5.2.6-1.fc38 fedora 299 k Installing dependencies: alternatives x86_64 1.19-3.fc37 fedora 36 k ansible-srpm-macros noarch 1-7.fc38 fedora 7.7 k audit-libs x86_64 3.0.9-1.fc38 copr_base 117 k authselect x86_64 1.4.0-3.fc37 fedora 144 k authselect-libs x86_64 1.4.0-3.fc37 fedora 248 k basesystem noarch 11-14.fc37 fedora 7.0 k binutils x86_64 2.39-3.fc38 fedora 5.4 M binutils-gold x86_64 2.39-3.fc38 fedora 778 k bzip2-libs x86_64 1.0.8-12.fc37 fedora 41 k ca-certificates noarch 2022.2.54-5.fc37 fedora 829 k coreutils-common x86_64 9.1-8.fc38 fedora 2.0 M cracklib x86_64 2.9.7-30.fc38 fedora 92 k crypto-policies noarch 20220824-2.git2187e9c.fc38 fedora 86 k curl x86_64 7.85.0-1.fc38 fedora 316 k cyrus-sasl-lib x86_64 2.1.28-8.fc38 fedora 792 k debugedit x86_64 5.0-5.fc37 fedora 77 k dwz x86_64 0.14-7.fc37 fedora 129 k ed x86_64 1.18-2.fc37 fedora 78 k efi-srpm-macros noarch 5-6.fc37 fedora 22 k elfutils x86_64 0.187-8.fc38 fedora 529 k elfutils-debuginfod-client x86_64 0.187-8.fc38 fedora 39 k elfutils-default-yama-scope noarch 0.187-8.fc38 fedora 16 k elfutils-libelf x86_64 0.187-8.fc38 fedora 197 k elfutils-libs x86_64 0.187-8.fc38 fedora 257 k fedora-gpg-keys noarch 38-0.3 fedora 125 k fedora-release noarch 38-0.4 fedora 11 k fedora-release-identity-basic noarch 38-0.4 fedora 12 k fedora-repos noarch 38-0.3 fedora 10 k fedora-repos-rawhide noarch 38-0.3 fedora 9.7 k file x86_64 5.42-4.fc37 fedora 49 k file-libs x86_64 5.42-4.fc37 fedora 676 k filesystem x86_64 3.18-2.fc37 fedora 1.1 M fonts-srpm-macros noarch 1:2.0.5-9.fc38 fedora 26 k fpc-srpm-macros noarch 1.3-6.fc37 fedora 7.7 k gdb-minimal x86_64 12.1-4.fc37 fedora 3.9 M gdbm-libs x86_64 1:1.23-2.fc37 fedora 56 k ghc-srpm-macros noarch 1.5.0-7.fc37 fedora 7.8 k glibc x86_64 2.36.9000-7.fc38 fedora 2.0 M glibc-common x86_64 2.36.9000-7.fc38 fedora 293 k glibc-gconv-extra x86_64 2.36.9000-7.fc38 fedora 1.6 M gmp x86_64 1:6.2.1-3.fc37 fedora 315 k gnat-srpm-macros noarch 4-16.fc37 fedora 8.3 k go-srpm-macros noarch 3.2.0-1.fc38 fedora 27 k jansson x86_64 2.13.1-5.fc37 fedora 44 k kernel-srpm-macros noarch 1.0-15.fc37 fedora 9.4 k keyutils-libs x86_64 1.6.1-5.fc37 fedora 31 k krb5-libs x86_64 1.19.2-11.fc37.1 fedora 727 k libacl x86_64 2.3.1-4.fc37 fedora 23 k libarchive x86_64 3.6.1-2.fc37 fedora 397 k libattr x86_64 2.5.1-5.fc37 fedora 18 k libblkid x86_64 2.38.1-2.fc38 copr_base 107 k libbrotli x86_64 1.0.9-9.fc37 fedora 315 k libcap x86_64 2.48-5.fc37 fedora 67 k libcap-ng x86_64 0.8.3-3.fc37 fedora 33 k libcom_err x86_64 1.46.5-3.fc37 fedora 25 k libcurl x86_64 7.85.0-1.fc38 fedora 304 k libdb x86_64 5.3.28-53.fc37 fedora 760 k libeconf x86_64 0.4.0-4.fc37 fedora 27 k libevent x86_64 2.1.12-7.fc37 fedora 261 k libfdisk x86_64 2.38.1-2.fc38 copr_base 161 k libffi x86_64 3.4.2-9.fc37 fedora 37 k libgcc x86_64 12.2.1-2.fc38 fedora 106 k libgomp x86_64 12.2.1-2.fc38 fedora 293 k libidn2 x86_64 2.3.3-2.fc37 fedora 113 k libmount x86_64 2.38.1-2.fc38 copr_base 135 k libnghttp2 x86_64 1.49.0-1.fc38 fedora 74 k libnsl2 x86_64 2.0.0-4.fc37 fedora 30 k libpkgconf x86_64 1.8.0-3.fc37 fedora 36 k libpsl x86_64 0.21.1-6.fc37 fedora 63 k libpwquality x86_64 1.4.4-11.fc37 fedora 116 k libselinux x86_64 3.4-5.fc37 fedora 86 k libsemanage x86_64 3.4-5.fc37 fedora 120 k libsepol x86_64 3.4-3.fc37 fedora 322 k libsigsegv x86_64 2.14-3.fc37 fedora 27 k libsmartcols x86_64 2.38.1-2.fc38 copr_base 65 k libssh x86_64 0.10.4-1.fc38 fedora 210 k libssh-config noarch 0.10.4-1.fc38 fedora 8.4 k libstdc++ x86_64 12.2.1-2.fc38 fedora 800 k libtasn1 x86_64 4.18.0-3.fc37 fedora 75 k libtirpc x86_64 1.3.3-0.fc37 fedora 93 k libunistring x86_64 1.0-2.fc37 fedora 549 k libutempter x86_64 1.2.1-7.fc37 fedora 26 k libuuid x86_64 2.38.1-2.fc38 copr_base 28 k libverto x86_64 0.3.2-4.fc37 fedora 21 k libxcrypt x86_64 4.4.28-3.fc38 fedora 117 k libxml2 x86_64 2.9.14-3.fc37 fedora 752 k libzstd x86_64 1.5.2-3.fc37 fedora 294 k lua-libs x86_64 5.4.4-4.fc37 fedora 217 k lua-srpm-macros noarch 1-7.fc37 fedora 8.8 k lz4-libs x86_64 1.9.3-5.fc37 fedora 70 k mpfr x86_64 4.1.0-10.fc37 fedora 331 k ncurses-base noarch 6.3-3.20220501.fc37 fedora 86 k ncurses-libs x86_64 6.3-3.20220501.fc37 fedora 329 k nim-srpm-macros noarch 3-7.fc37 fedora 8.4 k ocaml-srpm-macros noarch 7-2.fc37 fedora 13 k openblas-srpm-macros noarch 2-12.fc37 fedora 7.5 k openldap x86_64 2.6.3-1.fc38 fedora 254 k openssl-libs x86_64 1:3.0.5-5.fc38 fedora 2.1 M p11-kit x86_64 0.24.1-3.fc37 fedora 376 k p11-kit-trust x86_64 0.24.1-3.fc37 fedora 138 k package-notes-srpm-macros noarch 0.5-6.fc38 fedora 11 k pam x86_64 1.5.2-14.fc37 fedora 560 k pam-libs x86_64 1.5.2-14.fc37 fedora 58 k pcre2 x86_64 10.40-1.fc37.1 fedora 236 k pcre2-syntax noarch 10.40-1.fc37.1 fedora 142 k perl-srpm-macros noarch 1-46.fc37 fedora 8.3 k pkgconf x86_64 1.8.0-3.fc37 fedora 41 k pkgconf-m4 noarch 1.8.0-3.fc37 fedora 14 k pkgconf-pkg-config x86_64 1.8.0-3.fc37 fedora 10 k popt x86_64 1.19-1.fc38 fedora 66 k publicsuffix-list-dafsa noarch 20210518-5.fc37 fedora 58 k python-srpm-macros noarch 3.11-4.fc37 fedora 25 k qt5-srpm-macros noarch 5.15.5-2.fc37 fedora 8.1 k readline x86_64 8.1-7.fc37 fedora 211 k rpm x86_64 4.18.0-1.fc38 copr_base 544 k rpm-build-libs x86_64 4.18.0-1.fc38 copr_base 94 k rpm-libs x86_64 4.18.0-1.fc38 copr_base 321 k rpmautospec-rpm-macros noarch 0.3.0-1.fc37 fedora 8.8 k rust-srpm-macros noarch 22-1.fc37 fedora 9.5 k setup noarch 2.14.2-1.fc38 fedora 151 k sqlite-libs x86_64 3.39.3-2.fc38 fedora 658 k systemd-libs x86_64 251.4-53.fc38 fedora 620 k tzdata noarch 2022c-1.fc38 fedora 717 k util-linux-core x86_64 2.38.1-2.fc38 copr_base 456 k xxhash-libs x86_64 0.8.1-3.fc37 fedora 41 k xz-libs x86_64 5.2.6-1.fc38 fedora 92 k zip x86_64 3.0-33.fc37 fedora 259 k zlib x86_64 1.2.12-5.fc38 fedora 94 k zstd x86_64 1.5.2-3.fc37 fedora 447 k Installing Groups: Buildsystem building group Transaction Summary ================================================================================ Install 151 Packages Total download size: 51 M Installed size: 177 M Downloading Packages: (1/151): audit-libs-3.0.9-1.fc38.x86_64.rpm 1.0 MB/s | 117 kB 00:00 (2/151): libblkid-2.38.1-2.fc38.x86_64.rpm 950 kB/s | 107 kB 00:00 (3/151): libmount-2.38.1-2.fc38.x86_64.rpm 9.0 MB/s | 135 kB 00:00 (4/151): libsmartcols-2.38.1-2.fc38.x86_64.rpm 3.5 MB/s | 65 kB 00:00 (5/151): libuuid-2.38.1-2.fc38.x86_64.rpm 3.0 MB/s | 28 kB 00:00 (6/151): rpm-4.18.0-1.fc38.x86_64.rpm 22 MB/s | 544 kB 00:00 (7/151): libfdisk-2.38.1-2.fc38.x86_64.rpm 1.0 MB/s | 161 kB 00:00 (8/151): rpm-build-4.18.0-1.fc38.x86_64.rpm 3.3 MB/s | 70 kB 00:00 (9/151): rpm-build-libs-4.18.0-1.fc38.x86_64.rp 8.2 MB/s | 94 kB 00:00 (10/151): rpm-libs-4.18.0-1.fc38.x86_64.rpm 20 MB/s | 321 kB 00:00 (11/151): util-linux-2.38.1-2.fc38.x86_64.rpm 24 MB/s | 2.3 MB 00:00 (12/151): util-linux-core-2.38.1-2.fc38.x86_64. 5.3 MB/s | 456 kB 00:00 (13/151): alternatives-1.19-3.fc37.x86_64.rpm 170 kB/s | 36 kB 00:00 (14/151): ansible-srpm-macros-1-7.fc38.noarch.r 41 kB/s | 7.7 kB 00:00 (15/151): basesystem-11-14.fc37.noarch.rpm 146 kB/s | 7.0 kB 00:00 (16/151): authselect-libs-1.4.0-3.fc37.x86_64.r 1.8 MB/s | 248 kB 00:00 (17/151): authselect-1.4.0-3.fc37.x86_64.rpm 489 kB/s | 144 kB 00:00 (18/151): binutils-gold-2.39-3.fc38.x86_64.rpm 5.3 MB/s | 778 kB 00:00 (19/151): bzip2-1.0.8-12.fc37.x86_64.rpm 936 kB/s | 52 kB 00:00 (20/151): binutils-2.39-3.fc38.x86_64.rpm 22 MB/s | 5.4 MB 00:00 (21/151): bzip2-libs-1.0.8-12.fc37.x86_64.rpm 861 kB/s | 41 kB 00:00 (22/151): ca-certificates-2022.2.54-5.fc37.noar 13 MB/s | 829 kB 00:00 (23/151): bash-5.1.16-3.fc37.x86_64.rpm 4.2 MB/s | 1.7 MB 00:00 (24/151): coreutils-common-9.1-8.fc38.x86_64.rp 23 MB/s | 2.0 MB 00:00 (25/151): coreutils-9.1-8.fc38.x86_64.rpm 7.6 MB/s | 1.1 MB 00:00 (26/151): cpio-2.13-13.fc38.x86_64.rpm 4.2 MB/s | 276 kB 00:00 (27/151): cracklib-2.9.7-30.fc38.x86_64.rpm 1.6 MB/s | 92 kB 00:00 (28/151): crypto-policies-20220824-2.git2187e9c 1.6 MB/s | 86 kB 00:00 (29/151): curl-7.85.0-1.fc38.x86_64.rpm 6.1 MB/s | 316 kB 00:00 (30/151): cyrus-sasl-lib-2.1.28-8.fc38.x86_64.r 14 MB/s | 792 kB 00:00 (31/151): debugedit-5.0-5.fc37.x86_64.rpm 1.5 MB/s | 77 kB 00:00 (32/151): diffutils-3.8-3.fc37.x86_64.rpm 7.2 MB/s | 378 kB 00:00 (33/151): dwz-0.14-7.fc37.x86_64.rpm 2.6 MB/s | 129 kB 00:00 (34/151): ed-1.18-2.fc37.x86_64.rpm 1.6 MB/s | 78 kB 00:00 (35/151): efi-srpm-macros-5-6.fc37.noarch.rpm 467 kB/s | 22 kB 00:00 (36/151): elfutils-debuginfod-client-0.187-8.fc 826 kB/s | 39 kB 00:00 (37/151): elfutils-0.187-8.fc38.x86_64.rpm 9.8 MB/s | 529 kB 00:00 (38/151): elfutils-default-yama-scope-0.187-8.f 345 kB/s | 16 kB 00:00 (39/151): elfutils-libelf-0.187-8.fc38.x86_64.r 4.0 MB/s | 197 kB 00:00 (40/151): elfutils-libs-0.187-8.fc38.x86_64.rpm 4.8 MB/s | 257 kB 00:00 (41/151): fedora-gpg-keys-38-0.3.noarch.rpm 2.5 MB/s | 125 kB 00:00 (42/151): fedora-release-38-0.4.noarch.rpm 245 kB/s | 11 kB 00:00 (43/151): fedora-release-common-38-0.4.noarch.r 466 kB/s | 22 kB 00:00 (44/151): fedora-release-identity-basic-38-0.4. 251 kB/s | 12 kB 00:00 (45/151): fedora-repos-38-0.3.noarch.rpm 225 kB/s | 10 kB 00:00 (46/151): fedora-repos-rawhide-38-0.3.noarch.rp 212 kB/s | 9.7 kB 00:00 (47/151): file-5.42-4.fc37.x86_64.rpm 1.0 MB/s | 49 kB 00:00 (48/151): file-libs-5.42-4.fc37.x86_64.rpm 13 MB/s | 676 kB 00:00 (49/151): filesystem-3.18-2.fc37.x86_64.rpm 18 MB/s | 1.1 MB 00:00 (50/151): fonts-srpm-macros-2.0.5-9.fc38.noarch 570 kB/s | 26 kB 00:00 (51/151): fpc-srpm-macros-1.3-6.fc37.noarch.rpm 159 kB/s | 7.7 kB 00:00 (52/151): findutils-4.9.0-2.fc37.x86_64.rpm 5.1 MB/s | 492 kB 00:00 (53/151): gawk-5.1.1-4.fc37.x86_64.rpm 17 MB/s | 1.0 MB 00:00 (54/151): gdbm-libs-1.23-2.fc37.x86_64.rpm 1.0 MB/s | 56 kB 00:00 (55/151): ghc-srpm-macros-1.5.0-7.fc37.noarch.r 160 kB/s | 7.8 kB 00:00 (56/151): gdb-minimal-12.1-4.fc37.x86_64.rpm 34 MB/s | 3.9 MB 00:00 (57/151): glibc-common-2.36.9000-7.fc38.x86_64. 5.9 MB/s | 293 kB 00:00 (58/151): glibc-gconv-extra-2.36.9000-7.fc38.x8 24 MB/s | 1.6 MB 00:00 (59/151): glibc-minimal-langpack-2.36.9000-7.fc 317 kB/s | 14 kB 00:00 (60/151): gmp-6.2.1-3.fc37.x86_64.rpm 6.2 MB/s | 315 kB 00:00 (61/151): gnat-srpm-macros-4-16.fc37.noarch.rpm 177 kB/s | 8.3 kB 00:00 (62/151): grep-3.8-1.fc38.x86_64.rpm 5.9 MB/s | 292 kB 00:00 (63/151): go-srpm-macros-3.2.0-1.fc38.noarch.rp 546 kB/s | 27 kB 00:00 (64/151): glibc-2.36.9000-7.fc38.x86_64.rpm 8.7 MB/s | 2.0 MB 00:00 (65/151): gzip-1.12-2.fc37.x86_64.rpm 3.4 MB/s | 166 kB 00:00 (66/151): info-6.8-4.fc37.x86_64.rpm 4.4 MB/s | 225 kB 00:00 (67/151): jansson-2.13.1-5.fc37.x86_64.rpm 937 kB/s | 44 kB 00:00 (68/151): kernel-srpm-macros-1.0-15.fc37.noarch 200 kB/s | 9.4 kB 00:00 (69/151): keyutils-libs-1.6.1-5.fc37.x86_64.rpm 678 kB/s | 31 kB 00:00 (70/151): libacl-2.3.1-4.fc37.x86_64.rpm 505 kB/s | 23 kB 00:00 (71/151): libarchive-3.6.1-2.fc37.x86_64.rpm 7.7 MB/s | 397 kB 00:00 (72/151): krb5-libs-1.19.2-11.fc37.1.x86_64.rpm 7.4 MB/s | 727 kB 00:00 (73/151): libattr-2.5.1-5.fc37.x86_64.rpm 393 kB/s | 18 kB 00:00 (74/151): libbrotli-1.0.9-9.fc37.x86_64.rpm 6.1 MB/s | 315 kB 00:00 (75/151): libcap-2.48-5.fc37.x86_64.rpm 1.4 MB/s | 67 kB 00:00 (76/151): libcap-ng-0.8.3-3.fc37.x86_64.rpm 727 kB/s | 33 kB 00:00 (77/151): libcom_err-1.46.5-3.fc37.x86_64.rpm 554 kB/s | 25 kB 00:00 (78/151): libcurl-7.85.0-1.fc38.x86_64.rpm 5.8 MB/s | 304 kB 00:00 (79/151): libdb-5.3.28-53.fc37.x86_64.rpm 14 MB/s | 760 kB 00:00 (80/151): libeconf-0.4.0-4.fc37.x86_64.rpm 558 kB/s | 27 kB 00:00 (81/151): libevent-2.1.12-7.fc37.x86_64.rpm 5.1 MB/s | 261 kB 00:00 (82/151): libffi-3.4.2-9.fc37.x86_64.rpm 811 kB/s | 37 kB 00:00 (83/151): libgcc-12.2.1-2.fc38.x86_64.rpm 2.2 MB/s | 106 kB 00:00 (84/151): libgomp-12.2.1-2.fc38.x86_64.rpm 5.7 MB/s | 293 kB 00:00 (85/151): libidn2-2.3.3-2.fc37.x86_64.rpm 2.4 MB/s | 113 kB 00:00 (86/151): libnghttp2-1.49.0-1.fc38.x86_64.rpm 1.6 MB/s | 74 kB 00:00 (87/151): libnsl2-2.0.0-4.fc37.x86_64.rpm 644 kB/s | 30 kB 00:00 (88/151): libpkgconf-1.8.0-3.fc37.x86_64.rpm 781 kB/s | 36 kB 00:00 (89/151): libpsl-0.21.1-6.fc37.x86_64.rpm 1.3 MB/s | 63 kB 00:00 (90/151): libpwquality-1.4.4-11.fc37.x86_64.rpm 2.4 MB/s | 116 kB 00:00 (91/151): libselinux-3.4-5.fc37.x86_64.rpm 1.8 MB/s | 86 kB 00:00 (92/151): libsemanage-3.4-5.fc37.x86_64.rpm 2.5 MB/s | 120 kB 00:00 (93/151): libsepol-3.4-3.fc37.x86_64.rpm 6.3 MB/s | 322 kB 00:00 (94/151): libsigsegv-2.14-3.fc37.x86_64.rpm 581 kB/s | 27 kB 00:00 (95/151): libssh-0.10.4-1.fc38.x86_64.rpm 3.8 MB/s | 210 kB 00:00 (96/151): libssh-config-0.10.4-1.fc38.noarch.rp 179 kB/s | 8.4 kB 00:00 (97/151): libstdc++-12.2.1-2.fc38.x86_64.rpm 14 MB/s | 800 kB 00:00 (98/151): libtasn1-4.18.0-3.fc37.x86_64.rpm 1.6 MB/s | 75 kB 00:00 (99/151): libtirpc-1.3.3-0.fc37.x86_64.rpm 1.9 MB/s | 93 kB 00:00 (100/151): libunistring-1.0-2.fc37.x86_64.rpm 11 MB/s | 549 kB 00:00 (101/151): libutempter-1.2.1-7.fc37.x86_64.rpm 568 kB/s | 26 kB 00:00 (102/151): libverto-0.3.2-4.fc37.x86_64.rpm 439 kB/s | 21 kB 00:00 (103/151): libxcrypt-4.4.28-3.fc38.x86_64.rpm 2.3 MB/s | 117 kB 00:00 (104/151): lua-libs-5.4.4-4.fc37.x86_64.rpm 4.2 MB/s | 217 kB 00:00 (105/151): libxml2-2.9.14-3.fc37.x86_64.rpm 6.8 MB/s | 752 kB 00:00 (106/151): lua-srpm-macros-1-7.fc37.noarch.rpm 195 kB/s | 8.8 kB 00:00 (107/151): lz4-libs-1.9.3-5.fc37.x86_64.rpm 1.5 MB/s | 70 kB 00:00 (108/151): libzstd-1.5.2-3.fc37.x86_64.rpm 2.0 MB/s | 294 kB 00:00 (109/151): mpfr-4.1.0-10.fc37.x86_64.rpm 6.5 MB/s | 331 kB 00:00 (110/151): ncurses-base-6.3-3.20220501.fc37.noa 1.8 MB/s | 86 kB 00:00 (111/151): ncurses-libs-6.3-3.20220501.fc37.x86 6.3 MB/s | 329 kB 00:00 (112/151): nim-srpm-macros-3-7.fc37.noarch.rpm 184 kB/s | 8.4 kB 00:00 (113/151): ocaml-srpm-macros-7-2.fc37.noarch.rp 289 kB/s | 13 kB 00:00 (114/151): openblas-srpm-macros-2-12.fc37.noarc 157 kB/s | 7.5 kB 00:00 (115/151): openldap-2.6.3-1.fc38.x86_64.rpm 5.1 MB/s | 254 kB 00:00 (116/151): openssl-libs-3.0.5-5.fc38.x86_64.rpm 30 MB/s | 2.1 MB 00:00 (117/151): p11-kit-0.24.1-3.fc37.x86_64.rpm 6.2 MB/s | 376 kB 00:00 (118/151): p11-kit-trust-0.24.1-3.fc37.x86_64.r 2.8 MB/s | 138 kB 00:00 (119/151): package-notes-srpm-macros-0.5-6.fc38 230 kB/s | 11 kB 00:00 (120/151): pam-libs-1.5.2-14.fc37.x86_64.rpm 1.2 MB/s | 58 kB 00:00 (121/151): patch-2.7.6-17.fc37.x86_64.rpm 2.5 MB/s | 124 kB 00:00 (122/151): pam-1.5.2-14.fc37.x86_64.rpm 5.8 MB/s | 560 kB 00:00 (123/151): pcre2-10.40-1.fc37.1.x86_64.rpm 4.8 MB/s | 236 kB 00:00 (124/151): pcre2-syntax-10.40-1.fc37.1.noarch.r 2.9 MB/s | 142 kB 00:00 (125/151): perl-srpm-macros-1-46.fc37.noarch.rp 177 kB/s | 8.3 kB 00:00 (126/151): pkgconf-1.8.0-3.fc37.x86_64.rpm 901 kB/s | 41 kB 00:00 (127/151): pkgconf-m4-1.8.0-3.fc37.noarch.rpm 314 kB/s | 14 kB 00:00 (128/151): pkgconf-pkg-config-1.8.0-3.fc37.x86_ 216 kB/s | 10 kB 00:00 (129/151): popt-1.19-1.fc38.x86_64.rpm 1.4 MB/s | 66 kB 00:00 (130/151): publicsuffix-list-dafsa-20210518-5.f 1.2 MB/s | 58 kB 00:00 (131/151): python-srpm-macros-3.11-4.fc37.noarc 525 kB/s | 25 kB 00:00 (132/151): qt5-srpm-macros-5.15.5-2.fc37.noarch 178 kB/s | 8.1 kB 00:00 (133/151): readline-8.1-7.fc37.x86_64.rpm 4.2 MB/s | 211 kB 00:00 (134/151): redhat-rpm-config-231-1.fc38.noarch. 1.6 MB/s | 81 kB 00:00 (135/151): rpmautospec-rpm-macros-0.3.0-1.fc37. 181 kB/s | 8.8 kB 00:00 (136/151): rust-srpm-macros-22-1.fc37.noarch.rp 207 kB/s | 9.5 kB 00:00 (137/151): sed-4.8-11.fc37.x86_64.rpm 5.9 MB/s | 306 kB 00:00 (138/151): setup-2.14.2-1.fc38.noarch.rpm 3.2 MB/s | 151 kB 00:00 (139/151): shadow-utils-4.12.3-2.fc38.x86_64.rp 20 MB/s | 1.3 MB 00:00 (140/151): systemd-libs-251.4-53.fc38.x86_64.rp 10 MB/s | 620 kB 00:00 (141/151): sqlite-libs-3.39.3-2.fc38.x86_64.rpm 6.1 MB/s | 658 kB 00:00 (142/151): tar-1.34-3.fc36.x86_64.rpm 14 MB/s | 886 kB 00:00 (143/151): tzdata-2022c-1.fc38.noarch.rpm 12 MB/s | 717 kB 00:00 (144/151): unzip-6.0-58.fc37.x86_64.rpm 3.5 MB/s | 182 kB 00:00 (145/151): which-2.21-35.fc37.x86_64.rpm 880 kB/s | 41 kB 00:00 (146/151): xxhash-libs-0.8.1-3.fc37.x86_64.rpm 898 kB/s | 41 kB 00:00 (147/151): xz-5.2.6-1.fc38.x86_64.rpm 5.6 MB/s | 299 kB 00:00 (148/151): xz-libs-5.2.6-1.fc38.x86_64.rpm 1.8 MB/s | 92 kB 00:00 (149/151): zip-3.0-33.fc37.x86_64.rpm 5.3 MB/s | 259 kB 00:00 (150/151): zlib-1.2.12-5.fc38.x86_64.rpm 1.9 MB/s | 94 kB 00:00 (151/151): zstd-1.5.2-3.fc37.x86_64.rpm 8.3 MB/s | 447 kB 00:00 -------------------------------------------------------------------------------- Total 15 MB/s | 51 MB 00:03 fedora 1.6 MB/s | 1.6 kB 00:00 Importing GPG key 0xEB10B464: Userid : "Fedora (38) " Fingerprint: 6A51 BBAB BA3D 5467 B617 1221 809A 8D7C EB10 B464 From : /usr/share/distribution-gpg-keys/fedora/RPM-GPG-KEY-fedora-38-primary Key imported successfully fedora 1.6 MB/s | 1.6 kB 00:00 GPG key at file:///usr/share/distribution-gpg-keys/fedora/RPM-GPG-KEY-fedora-38-primary (0xEB10B464) is already installed fedora 1.6 MB/s | 1.6 kB 00:00 Importing GPG key 0x5323552A: Userid : "Fedora (37) " Fingerprint: ACB5 EE4E 831C 74BB 7C16 8D27 F55A D3FB 5323 552A From : /usr/share/distribution-gpg-keys/fedora/RPM-GPG-KEY-fedora-37-primary Key imported successfully Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Running scriptlet: filesystem-3.18-2.fc37.x86_64 1/1 Preparing : 1/1 Installing : libgcc-12.2.1-2.fc38.x86_64 1/151 Running scriptlet: libgcc-12.2.1-2.fc38.x86_64 1/151 Installing : crypto-policies-20220824-2.git2187e9c.fc38.noarc 2/151 Running scriptlet: crypto-policies-20220824-2.git2187e9c.fc38.noarc 2/151 Installing : fedora-release-identity-basic-38-0.4.noarch 3/151 Installing : tzdata-2022c-1.fc38.noarch 4/151 Installing : rust-srpm-macros-22-1.fc37.noarch 5/151 Installing : qt5-srpm-macros-5.15.5-2.fc37.noarch 6/151 Installing : publicsuffix-list-dafsa-20210518-5.fc37.noarch 7/151 Installing : pkgconf-m4-1.8.0-3.fc37.noarch 8/151 Installing : perl-srpm-macros-1-46.fc37.noarch 9/151 Installing : pcre2-syntax-10.40-1.fc37.1.noarch 10/151 Installing : package-notes-srpm-macros-0.5-6.fc38.noarch 11/151 Installing : openblas-srpm-macros-2-12.fc37.noarch 12/151 Installing : ocaml-srpm-macros-7-2.fc37.noarch 13/151 Installing : nim-srpm-macros-3-7.fc37.noarch 14/151 Installing : ncurses-base-6.3-3.20220501.fc37.noarch 15/151 Installing : libssh-config-0.10.4-1.fc38.noarch 16/151 Installing : kernel-srpm-macros-1.0-15.fc37.noarch 17/151 Installing : gnat-srpm-macros-4-16.fc37.noarch 18/151 Installing : ghc-srpm-macros-1.5.0-7.fc37.noarch 19/151 Installing : fpc-srpm-macros-1.3-6.fc37.noarch 20/151 Installing : fedora-gpg-keys-38-0.3.noarch 21/151 Installing : fedora-release-38-0.4.noarch 22/151 Installing : fedora-release-common-38-0.4.noarch 23/151 Installing : fedora-repos-rawhide-38-0.3.noarch 24/151 Installing : fedora-repos-38-0.3.noarch 25/151 Installing : setup-2.14.2-1.fc38.noarch 26/151 warning: /etc/hosts created as /etc/hosts.rpmnew Running scriptlet: setup-2.14.2-1.fc38.noarch 26/151 Installing : filesystem-3.18-2.fc37.x86_64 27/151 Installing : basesystem-11-14.fc37.noarch 28/151 Installing : glibc-gconv-extra-2.36.9000-7.fc38.x86_64 29/151 Running scriptlet: glibc-gconv-extra-2.36.9000-7.fc38.x86_64 29/151 Installing : glibc-minimal-langpack-2.36.9000-7.fc38.x86_64 30/151 Installing : glibc-common-2.36.9000-7.fc38.x86_64 31/151 Running scriptlet: glibc-2.36.9000-7.fc38.x86_64 32/151 Installing : glibc-2.36.9000-7.fc38.x86_64 32/151 Running scriptlet: glibc-2.36.9000-7.fc38.x86_64 32/151 Installing : ncurses-libs-6.3-3.20220501.fc37.x86_64 33/151 Installing : bash-5.1.16-3.fc37.x86_64 34/151 Running scriptlet: bash-5.1.16-3.fc37.x86_64 34/151 Installing : zlib-1.2.12-5.fc38.x86_64 35/151 Installing : xz-libs-5.2.6-1.fc38.x86_64 36/151 Installing : bzip2-libs-1.0.8-12.fc37.x86_64 37/151 Installing : elfutils-libelf-0.187-8.fc38.x86_64 38/151 Installing : libuuid-2.38.1-2.fc38.x86_64 39/151 Installing : libstdc++-12.2.1-2.fc38.x86_64 40/151 Installing : libzstd-1.5.2-3.fc37.x86_64 41/151 Installing : popt-1.19-1.fc38.x86_64 42/151 Installing : libblkid-2.38.1-2.fc38.x86_64 43/151 Installing : readline-8.1-7.fc37.x86_64 44/151 Installing : gmp-1:6.2.1-3.fc37.x86_64 45/151 Installing : libattr-2.5.1-5.fc37.x86_64 46/151 Installing : libacl-2.3.1-4.fc37.x86_64 47/151 Installing : libcap-2.48-5.fc37.x86_64 48/151 Installing : libxcrypt-4.4.28-3.fc38.x86_64 49/151 Installing : lz4-libs-1.9.3-5.fc37.x86_64 50/151 Installing : systemd-libs-251.4-53.fc38.x86_64 51/151 Installing : mpfr-4.1.0-10.fc37.x86_64 52/151 Installing : dwz-0.14-7.fc37.x86_64 53/151 Installing : unzip-6.0-58.fc37.x86_64 54/151 Installing : file-libs-5.42-4.fc37.x86_64 55/151 Installing : file-5.42-4.fc37.x86_64 56/151 Installing : sqlite-libs-3.39.3-2.fc38.x86_64 57/151 Installing : libsmartcols-2.38.1-2.fc38.x86_64 58/151 Installing : alternatives-1.19-3.fc37.x86_64 59/151 Installing : libcap-ng-0.8.3-3.fc37.x86_64 60/151 Installing : audit-libs-3.0.9-1.fc38.x86_64 61/151 Installing : libcom_err-1.46.5-3.fc37.x86_64 62/151 Installing : libeconf-0.4.0-4.fc37.x86_64 63/151 Installing : pam-libs-1.5.2-14.fc37.x86_64 64/151 Installing : libsepol-3.4-3.fc37.x86_64 65/151 Installing : libunistring-1.0-2.fc37.x86_64 66/151 Installing : libidn2-2.3.3-2.fc37.x86_64 67/151 Installing : lua-libs-5.4.4-4.fc37.x86_64 68/151 Installing : pcre2-10.40-1.fc37.1.x86_64 69/151 Installing : libselinux-3.4-5.fc37.x86_64 70/151 Installing : sed-4.8-11.fc37.x86_64 71/151 Installing : grep-3.8-1.fc38.x86_64 72/151 Installing : findutils-1:4.9.0-2.fc37.x86_64 73/151 Installing : xz-5.2.6-1.fc38.x86_64 74/151 Installing : libmount-2.38.1-2.fc38.x86_64 75/151 Installing : util-linux-core-2.38.1-2.fc38.x86_64 76/151 Installing : libsemanage-3.4-5.fc37.x86_64 77/151 Installing : shadow-utils-2:4.12.3-2.fc38.x86_64 78/151 Running scriptlet: libutempter-1.2.1-7.fc37.x86_64 79/151 Installing : libutempter-1.2.1-7.fc37.x86_64 79/151 Installing : tar-2:1.34-3.fc36.x86_64 80/151 Installing : libpsl-0.21.1-6.fc37.x86_64 81/151 Installing : zip-3.0-33.fc37.x86_64 82/151 Installing : zstd-1.5.2-3.fc37.x86_64 83/151 Installing : libfdisk-2.38.1-2.fc38.x86_64 84/151 Installing : bzip2-1.0.8-12.fc37.x86_64 85/151 Installing : libxml2-2.9.14-3.fc37.x86_64 86/151 Installing : ed-1.18-2.fc37.x86_64 87/151 Installing : patch-2.7.6-17.fc37.x86_64 88/151 Installing : elfutils-default-yama-scope-0.187-8.fc38.noarch 89/151 Running scriptlet: elfutils-default-yama-scope-0.187-8.fc38.noarch 89/151 Installing : cpio-2.13-13.fc38.x86_64 90/151 Installing : diffutils-3.8-3.fc37.x86_64 91/151 Installing : gdbm-libs-1:1.23-2.fc37.x86_64 92/151 Installing : cyrus-sasl-lib-2.1.28-8.fc38.x86_64 93/151 Installing : jansson-2.13.1-5.fc37.x86_64 94/151 Installing : keyutils-libs-1.6.1-5.fc37.x86_64 95/151 Installing : libbrotli-1.0.9-9.fc37.x86_64 96/151 Installing : libdb-5.3.28-53.fc37.x86_64 97/151 Installing : libffi-3.4.2-9.fc37.x86_64 98/151 Installing : p11-kit-0.24.1-3.fc37.x86_64 99/151 Installing : libgomp-12.2.1-2.fc38.x86_64 100/151 Installing : libnghttp2-1.49.0-1.fc38.x86_64 101/151 Installing : libpkgconf-1.8.0-3.fc37.x86_64 102/151 Installing : pkgconf-1.8.0-3.fc37.x86_64 103/151 Installing : pkgconf-pkg-config-1.8.0-3.fc37.x86_64 104/151 Installing : libsigsegv-2.14-3.fc37.x86_64 105/151 Installing : gawk-5.1.1-4.fc37.x86_64 106/151 Installing : libtasn1-4.18.0-3.fc37.x86_64 107/151 Installing : p11-kit-trust-0.24.1-3.fc37.x86_64 108/151 Running scriptlet: p11-kit-trust-0.24.1-3.fc37.x86_64 108/151 Installing : libverto-0.3.2-4.fc37.x86_64 109/151 Installing : xxhash-libs-0.8.1-3.fc37.x86_64 110/151 Installing : coreutils-common-9.1-8.fc38.x86_64 111/151 Installing : openssl-libs-1:3.0.5-5.fc38.x86_64 112/151 Installing : coreutils-9.1-8.fc38.x86_64 113/151 Running scriptlet: ca-certificates-2022.2.54-5.fc37.noarch 114/151 Installing : ca-certificates-2022.2.54-5.fc37.noarch 114/151 Running scriptlet: ca-certificates-2022.2.54-5.fc37.noarch 114/151 Installing : krb5-libs-1.19.2-11.fc37.1.x86_64 115/151 Installing : libtirpc-1.3.3-0.fc37.x86_64 116/151 Running scriptlet: authselect-libs-1.4.0-3.fc37.x86_64 117/151 Installing : authselect-libs-1.4.0-3.fc37.x86_64 117/151 Installing : gzip-1.12-2.fc37.x86_64 118/151 Installing : cracklib-2.9.7-30.fc38.x86_64 119/151 Installing : libpwquality-1.4.4-11.fc37.x86_64 120/151 Installing : authselect-1.4.0-3.fc37.x86_64 121/151 Installing : libnsl2-2.0.0-4.fc37.x86_64 122/151 Installing : pam-1.5.2-14.fc37.x86_64 123/151 Installing : libssh-0.10.4-1.fc38.x86_64 124/151 Installing : libarchive-3.6.1-2.fc37.x86_64 125/151 Installing : libevent-2.1.12-7.fc37.x86_64 126/151 Installing : openldap-2.6.3-1.fc38.x86_64 127/151 Installing : libcurl-7.85.0-1.fc38.x86_64 128/151 Installing : elfutils-libs-0.187-8.fc38.x86_64 129/151 Installing : elfutils-debuginfod-client-0.187-8.fc38.x86_64 130/151 Installing : binutils-gold-2.39-3.fc38.x86_64 131/151 Installing : binutils-2.39-3.fc38.x86_64 132/151 Running scriptlet: binutils-2.39-3.fc38.x86_64 132/151 Installing : elfutils-0.187-8.fc38.x86_64 133/151 Installing : gdb-minimal-12.1-4.fc37.x86_64 134/151 Installing : debugedit-5.0-5.fc37.x86_64 135/151 Installing : curl-7.85.0-1.fc38.x86_64 136/151 Running scriptlet: rpm-4.18.0-1.fc38.x86_64 137/151 Installing : rpm-4.18.0-1.fc38.x86_64 137/151 Installing : rpm-libs-4.18.0-1.fc38.x86_64 138/151 Installing : rpm-build-libs-4.18.0-1.fc38.x86_64 139/151 Installing : efi-srpm-macros-5-6.fc37.noarch 140/151 Installing : lua-srpm-macros-1-7.fc37.noarch 141/151 Installing : rpmautospec-rpm-macros-0.3.0-1.fc37.noarch 142/151 Installing : ansible-srpm-macros-1-7.fc38.noarch 143/151 Installing : fonts-srpm-macros-1:2.0.5-9.fc38.noarch 144/151 Installing : go-srpm-macros-3.2.0-1.fc38.noarch 145/151 Installing : python-srpm-macros-3.11-4.fc37.noarch 146/151 Installing : redhat-rpm-config-231-1.fc38.noarch 147/151 Installing : rpm-build-4.18.0-1.fc38.x86_64 148/151 Installing : util-linux-2.38.1-2.fc38.x86_64 149/151 Installing : which-2.21-35.fc37.x86_64 150/151 Installing : info-6.8-4.fc37.x86_64 151/151 Running scriptlet: filesystem-3.18-2.fc37.x86_64 151/151 Running scriptlet: ca-certificates-2022.2.54-5.fc37.noarch 151/151 Running scriptlet: authselect-libs-1.4.0-3.fc37.x86_64 151/151 Running scriptlet: rpm-4.18.0-1.fc38.x86_64 151/151 Running scriptlet: info-6.8-4.fc37.x86_64 151/151 Verifying : audit-libs-3.0.9-1.fc38.x86_64 1/151 Verifying : libblkid-2.38.1-2.fc38.x86_64 2/151 Verifying : libfdisk-2.38.1-2.fc38.x86_64 3/151 Verifying : libmount-2.38.1-2.fc38.x86_64 4/151 Verifying : libsmartcols-2.38.1-2.fc38.x86_64 5/151 Verifying : libuuid-2.38.1-2.fc38.x86_64 6/151 Verifying : rpm-4.18.0-1.fc38.x86_64 7/151 Verifying : rpm-build-4.18.0-1.fc38.x86_64 8/151 Verifying : rpm-build-libs-4.18.0-1.fc38.x86_64 9/151 Verifying : rpm-libs-4.18.0-1.fc38.x86_64 10/151 Verifying : util-linux-2.38.1-2.fc38.x86_64 11/151 Verifying : util-linux-core-2.38.1-2.fc38.x86_64 12/151 Verifying : alternatives-1.19-3.fc37.x86_64 13/151 Verifying : ansible-srpm-macros-1-7.fc38.noarch 14/151 Verifying : authselect-1.4.0-3.fc37.x86_64 15/151 Verifying : authselect-libs-1.4.0-3.fc37.x86_64 16/151 Verifying : basesystem-11-14.fc37.noarch 17/151 Verifying : bash-5.1.16-3.fc37.x86_64 18/151 Verifying : binutils-2.39-3.fc38.x86_64 19/151 Verifying : binutils-gold-2.39-3.fc38.x86_64 20/151 Verifying : bzip2-1.0.8-12.fc37.x86_64 21/151 Verifying : bzip2-libs-1.0.8-12.fc37.x86_64 22/151 Verifying : ca-certificates-2022.2.54-5.fc37.noarch 23/151 Verifying : coreutils-9.1-8.fc38.x86_64 24/151 Verifying : coreutils-common-9.1-8.fc38.x86_64 25/151 Verifying : cpio-2.13-13.fc38.x86_64 26/151 Verifying : cracklib-2.9.7-30.fc38.x86_64 27/151 Verifying : crypto-policies-20220824-2.git2187e9c.fc38.noarc 28/151 Verifying : curl-7.85.0-1.fc38.x86_64 29/151 Verifying : cyrus-sasl-lib-2.1.28-8.fc38.x86_64 30/151 Verifying : debugedit-5.0-5.fc37.x86_64 31/151 Verifying : diffutils-3.8-3.fc37.x86_64 32/151 Verifying : dwz-0.14-7.fc37.x86_64 33/151 Verifying : ed-1.18-2.fc37.x86_64 34/151 Verifying : efi-srpm-macros-5-6.fc37.noarch 35/151 Verifying : elfutils-0.187-8.fc38.x86_64 36/151 Verifying : elfutils-debuginfod-client-0.187-8.fc38.x86_64 37/151 Verifying : elfutils-default-yama-scope-0.187-8.fc38.noarch 38/151 Verifying : elfutils-libelf-0.187-8.fc38.x86_64 39/151 Verifying : elfutils-libs-0.187-8.fc38.x86_64 40/151 Verifying : fedora-gpg-keys-38-0.3.noarch 41/151 Verifying : fedora-release-38-0.4.noarch 42/151 Verifying : fedora-release-common-38-0.4.noarch 43/151 Verifying : fedora-release-identity-basic-38-0.4.noarch 44/151 Verifying : fedora-repos-38-0.3.noarch 45/151 Verifying : fedora-repos-rawhide-38-0.3.noarch 46/151 Verifying : file-5.42-4.fc37.x86_64 47/151 Verifying : file-libs-5.42-4.fc37.x86_64 48/151 Verifying : filesystem-3.18-2.fc37.x86_64 49/151 Verifying : findutils-1:4.9.0-2.fc37.x86_64 50/151 Verifying : fonts-srpm-macros-1:2.0.5-9.fc38.noarch 51/151 Verifying : fpc-srpm-macros-1.3-6.fc37.noarch 52/151 Verifying : gawk-5.1.1-4.fc37.x86_64 53/151 Verifying : gdb-minimal-12.1-4.fc37.x86_64 54/151 Verifying : gdbm-libs-1:1.23-2.fc37.x86_64 55/151 Verifying : ghc-srpm-macros-1.5.0-7.fc37.noarch 56/151 Verifying : glibc-2.36.9000-7.fc38.x86_64 57/151 Verifying : glibc-common-2.36.9000-7.fc38.x86_64 58/151 Verifying : glibc-gconv-extra-2.36.9000-7.fc38.x86_64 59/151 Verifying : glibc-minimal-langpack-2.36.9000-7.fc38.x86_64 60/151 Verifying : gmp-1:6.2.1-3.fc37.x86_64 61/151 Verifying : gnat-srpm-macros-4-16.fc37.noarch 62/151 Verifying : go-srpm-macros-3.2.0-1.fc38.noarch 63/151 Verifying : grep-3.8-1.fc38.x86_64 64/151 Verifying : gzip-1.12-2.fc37.x86_64 65/151 Verifying : info-6.8-4.fc37.x86_64 66/151 Verifying : jansson-2.13.1-5.fc37.x86_64 67/151 Verifying : kernel-srpm-macros-1.0-15.fc37.noarch 68/151 Verifying : keyutils-libs-1.6.1-5.fc37.x86_64 69/151 Verifying : krb5-libs-1.19.2-11.fc37.1.x86_64 70/151 Verifying : libacl-2.3.1-4.fc37.x86_64 71/151 Verifying : libarchive-3.6.1-2.fc37.x86_64 72/151 Verifying : libattr-2.5.1-5.fc37.x86_64 73/151 Verifying : libbrotli-1.0.9-9.fc37.x86_64 74/151 Verifying : libcap-2.48-5.fc37.x86_64 75/151 Verifying : libcap-ng-0.8.3-3.fc37.x86_64 76/151 Verifying : libcom_err-1.46.5-3.fc37.x86_64 77/151 Verifying : libcurl-7.85.0-1.fc38.x86_64 78/151 Verifying : libdb-5.3.28-53.fc37.x86_64 79/151 Verifying : libeconf-0.4.0-4.fc37.x86_64 80/151 Verifying : libevent-2.1.12-7.fc37.x86_64 81/151 Verifying : libffi-3.4.2-9.fc37.x86_64 82/151 Verifying : libgcc-12.2.1-2.fc38.x86_64 83/151 Verifying : libgomp-12.2.1-2.fc38.x86_64 84/151 Verifying : libidn2-2.3.3-2.fc37.x86_64 85/151 Verifying : libnghttp2-1.49.0-1.fc38.x86_64 86/151 Verifying : libnsl2-2.0.0-4.fc37.x86_64 87/151 Verifying : libpkgconf-1.8.0-3.fc37.x86_64 88/151 Verifying : libpsl-0.21.1-6.fc37.x86_64 89/151 Verifying : libpwquality-1.4.4-11.fc37.x86_64 90/151 Verifying : libselinux-3.4-5.fc37.x86_64 91/151 Verifying : libsemanage-3.4-5.fc37.x86_64 92/151 Verifying : libsepol-3.4-3.fc37.x86_64 93/151 Verifying : libsigsegv-2.14-3.fc37.x86_64 94/151 Verifying : libssh-0.10.4-1.fc38.x86_64 95/151 Verifying : libssh-config-0.10.4-1.fc38.noarch 96/151 Verifying : libstdc++-12.2.1-2.fc38.x86_64 97/151 Verifying : libtasn1-4.18.0-3.fc37.x86_64 98/151 Verifying : libtirpc-1.3.3-0.fc37.x86_64 99/151 Verifying : libunistring-1.0-2.fc37.x86_64 100/151 Verifying : libutempter-1.2.1-7.fc37.x86_64 101/151 Verifying : libverto-0.3.2-4.fc37.x86_64 102/151 Verifying : libxcrypt-4.4.28-3.fc38.x86_64 103/151 Verifying : libxml2-2.9.14-3.fc37.x86_64 104/151 Verifying : libzstd-1.5.2-3.fc37.x86_64 105/151 Verifying : lua-libs-5.4.4-4.fc37.x86_64 106/151 Verifying : lua-srpm-macros-1-7.fc37.noarch 107/151 Verifying : lz4-libs-1.9.3-5.fc37.x86_64 108/151 Verifying : mpfr-4.1.0-10.fc37.x86_64 109/151 Verifying : ncurses-base-6.3-3.20220501.fc37.noarch 110/151 Verifying : ncurses-libs-6.3-3.20220501.fc37.x86_64 111/151 Verifying : nim-srpm-macros-3-7.fc37.noarch 112/151 Verifying : ocaml-srpm-macros-7-2.fc37.noarch 113/151 Verifying : openblas-srpm-macros-2-12.fc37.noarch 114/151 Verifying : openldap-2.6.3-1.fc38.x86_64 115/151 Verifying : openssl-libs-1:3.0.5-5.fc38.x86_64 116/151 Verifying : p11-kit-0.24.1-3.fc37.x86_64 117/151 Verifying : p11-kit-trust-0.24.1-3.fc37.x86_64 118/151 Verifying : package-notes-srpm-macros-0.5-6.fc38.noarch 119/151 Verifying : pam-1.5.2-14.fc37.x86_64 120/151 Verifying : pam-libs-1.5.2-14.fc37.x86_64 121/151 Verifying : patch-2.7.6-17.fc37.x86_64 122/151 Verifying : pcre2-10.40-1.fc37.1.x86_64 123/151 Verifying : pcre2-syntax-10.40-1.fc37.1.noarch 124/151 Verifying : perl-srpm-macros-1-46.fc37.noarch 125/151 Verifying : pkgconf-1.8.0-3.fc37.x86_64 126/151 Verifying : pkgconf-m4-1.8.0-3.fc37.noarch 127/151 Verifying : pkgconf-pkg-config-1.8.0-3.fc37.x86_64 128/151 Verifying : popt-1.19-1.fc38.x86_64 129/151 Verifying : publicsuffix-list-dafsa-20210518-5.fc37.noarch 130/151 Verifying : python-srpm-macros-3.11-4.fc37.noarch 131/151 Verifying : qt5-srpm-macros-5.15.5-2.fc37.noarch 132/151 Verifying : readline-8.1-7.fc37.x86_64 133/151 Verifying : redhat-rpm-config-231-1.fc38.noarch 134/151 Verifying : rpmautospec-rpm-macros-0.3.0-1.fc37.noarch 135/151 Verifying : rust-srpm-macros-22-1.fc37.noarch 136/151 Verifying : sed-4.8-11.fc37.x86_64 137/151 Verifying : setup-2.14.2-1.fc38.noarch 138/151 Verifying : shadow-utils-2:4.12.3-2.fc38.x86_64 139/151 Verifying : sqlite-libs-3.39.3-2.fc38.x86_64 140/151 Verifying : systemd-libs-251.4-53.fc38.x86_64 141/151 Verifying : tar-2:1.34-3.fc36.x86_64 142/151 Verifying : tzdata-2022c-1.fc38.noarch 143/151 Verifying : unzip-6.0-58.fc37.x86_64 144/151 Verifying : which-2.21-35.fc37.x86_64 145/151 Verifying : xxhash-libs-0.8.1-3.fc37.x86_64 146/151 Verifying : xz-5.2.6-1.fc38.x86_64 147/151 Verifying : xz-libs-5.2.6-1.fc38.x86_64 148/151 Verifying : zip-3.0-33.fc37.x86_64 149/151 Verifying : zlib-1.2.12-5.fc38.x86_64 150/151 Verifying : zstd-1.5.2-3.fc37.x86_64 151/151 Installed: alternatives-1.19-3.fc37.x86_64 ansible-srpm-macros-1-7.fc38.noarch audit-libs-3.0.9-1.fc38.x86_64 authselect-1.4.0-3.fc37.x86_64 authselect-libs-1.4.0-3.fc37.x86_64 basesystem-11-14.fc37.noarch bash-5.1.16-3.fc37.x86_64 binutils-2.39-3.fc38.x86_64 binutils-gold-2.39-3.fc38.x86_64 bzip2-1.0.8-12.fc37.x86_64 bzip2-libs-1.0.8-12.fc37.x86_64 ca-certificates-2022.2.54-5.fc37.noarch coreutils-9.1-8.fc38.x86_64 coreutils-common-9.1-8.fc38.x86_64 cpio-2.13-13.fc38.x86_64 cracklib-2.9.7-30.fc38.x86_64 crypto-policies-20220824-2.git2187e9c.fc38.noarch curl-7.85.0-1.fc38.x86_64 cyrus-sasl-lib-2.1.28-8.fc38.x86_64 debugedit-5.0-5.fc37.x86_64 diffutils-3.8-3.fc37.x86_64 dwz-0.14-7.fc37.x86_64 ed-1.18-2.fc37.x86_64 efi-srpm-macros-5-6.fc37.noarch elfutils-0.187-8.fc38.x86_64 elfutils-debuginfod-client-0.187-8.fc38.x86_64 elfutils-default-yama-scope-0.187-8.fc38.noarch elfutils-libelf-0.187-8.fc38.x86_64 elfutils-libs-0.187-8.fc38.x86_64 fedora-gpg-keys-38-0.3.noarch fedora-release-38-0.4.noarch fedora-release-common-38-0.4.noarch fedora-release-identity-basic-38-0.4.noarch fedora-repos-38-0.3.noarch fedora-repos-rawhide-38-0.3.noarch file-5.42-4.fc37.x86_64 file-libs-5.42-4.fc37.x86_64 filesystem-3.18-2.fc37.x86_64 findutils-1:4.9.0-2.fc37.x86_64 fonts-srpm-macros-1:2.0.5-9.fc38.noarch fpc-srpm-macros-1.3-6.fc37.noarch gawk-5.1.1-4.fc37.x86_64 gdb-minimal-12.1-4.fc37.x86_64 gdbm-libs-1:1.23-2.fc37.x86_64 ghc-srpm-macros-1.5.0-7.fc37.noarch glibc-2.36.9000-7.fc38.x86_64 glibc-common-2.36.9000-7.fc38.x86_64 glibc-gconv-extra-2.36.9000-7.fc38.x86_64 glibc-minimal-langpack-2.36.9000-7.fc38.x86_64 gmp-1:6.2.1-3.fc37.x86_64 gnat-srpm-macros-4-16.fc37.noarch go-srpm-macros-3.2.0-1.fc38.noarch grep-3.8-1.fc38.x86_64 gzip-1.12-2.fc37.x86_64 info-6.8-4.fc37.x86_64 jansson-2.13.1-5.fc37.x86_64 kernel-srpm-macros-1.0-15.fc37.noarch keyutils-libs-1.6.1-5.fc37.x86_64 krb5-libs-1.19.2-11.fc37.1.x86_64 libacl-2.3.1-4.fc37.x86_64 libarchive-3.6.1-2.fc37.x86_64 libattr-2.5.1-5.fc37.x86_64 libblkid-2.38.1-2.fc38.x86_64 libbrotli-1.0.9-9.fc37.x86_64 libcap-2.48-5.fc37.x86_64 libcap-ng-0.8.3-3.fc37.x86_64 libcom_err-1.46.5-3.fc37.x86_64 libcurl-7.85.0-1.fc38.x86_64 libdb-5.3.28-53.fc37.x86_64 libeconf-0.4.0-4.fc37.x86_64 libevent-2.1.12-7.fc37.x86_64 libfdisk-2.38.1-2.fc38.x86_64 libffi-3.4.2-9.fc37.x86_64 libgcc-12.2.1-2.fc38.x86_64 libgomp-12.2.1-2.fc38.x86_64 libidn2-2.3.3-2.fc37.x86_64 libmount-2.38.1-2.fc38.x86_64 libnghttp2-1.49.0-1.fc38.x86_64 libnsl2-2.0.0-4.fc37.x86_64 libpkgconf-1.8.0-3.fc37.x86_64 libpsl-0.21.1-6.fc37.x86_64 libpwquality-1.4.4-11.fc37.x86_64 libselinux-3.4-5.fc37.x86_64 libsemanage-3.4-5.fc37.x86_64 libsepol-3.4-3.fc37.x86_64 libsigsegv-2.14-3.fc37.x86_64 libsmartcols-2.38.1-2.fc38.x86_64 libssh-0.10.4-1.fc38.x86_64 libssh-config-0.10.4-1.fc38.noarch libstdc++-12.2.1-2.fc38.x86_64 libtasn1-4.18.0-3.fc37.x86_64 libtirpc-1.3.3-0.fc37.x86_64 libunistring-1.0-2.fc37.x86_64 libutempter-1.2.1-7.fc37.x86_64 libuuid-2.38.1-2.fc38.x86_64 libverto-0.3.2-4.fc37.x86_64 libxcrypt-4.4.28-3.fc38.x86_64 libxml2-2.9.14-3.fc37.x86_64 libzstd-1.5.2-3.fc37.x86_64 lua-libs-5.4.4-4.fc37.x86_64 lua-srpm-macros-1-7.fc37.noarch lz4-libs-1.9.3-5.fc37.x86_64 mpfr-4.1.0-10.fc37.x86_64 ncurses-base-6.3-3.20220501.fc37.noarch ncurses-libs-6.3-3.20220501.fc37.x86_64 nim-srpm-macros-3-7.fc37.noarch ocaml-srpm-macros-7-2.fc37.noarch openblas-srpm-macros-2-12.fc37.noarch openldap-2.6.3-1.fc38.x86_64 openssl-libs-1:3.0.5-5.fc38.x86_64 p11-kit-0.24.1-3.fc37.x86_64 p11-kit-trust-0.24.1-3.fc37.x86_64 package-notes-srpm-macros-0.5-6.fc38.noarch pam-1.5.2-14.fc37.x86_64 pam-libs-1.5.2-14.fc37.x86_64 patch-2.7.6-17.fc37.x86_64 pcre2-10.40-1.fc37.1.x86_64 pcre2-syntax-10.40-1.fc37.1.noarch perl-srpm-macros-1-46.fc37.noarch pkgconf-1.8.0-3.fc37.x86_64 pkgconf-m4-1.8.0-3.fc37.noarch pkgconf-pkg-config-1.8.0-3.fc37.x86_64 popt-1.19-1.fc38.x86_64 publicsuffix-list-dafsa-20210518-5.fc37.noarch python-srpm-macros-3.11-4.fc37.noarch qt5-srpm-macros-5.15.5-2.fc37.noarch readline-8.1-7.fc37.x86_64 redhat-rpm-config-231-1.fc38.noarch rpm-4.18.0-1.fc38.x86_64 rpm-build-4.18.0-1.fc38.x86_64 rpm-build-libs-4.18.0-1.fc38.x86_64 rpm-libs-4.18.0-1.fc38.x86_64 rpmautospec-rpm-macros-0.3.0-1.fc37.noarch rust-srpm-macros-22-1.fc37.noarch sed-4.8-11.fc37.x86_64 setup-2.14.2-1.fc38.noarch shadow-utils-2:4.12.3-2.fc38.x86_64 sqlite-libs-3.39.3-2.fc38.x86_64 systemd-libs-251.4-53.fc38.x86_64 tar-2:1.34-3.fc36.x86_64 tzdata-2022c-1.fc38.noarch unzip-6.0-58.fc37.x86_64 util-linux-2.38.1-2.fc38.x86_64 util-linux-core-2.38.1-2.fc38.x86_64 which-2.21-35.fc37.x86_64 xxhash-libs-0.8.1-3.fc37.x86_64 xz-5.2.6-1.fc38.x86_64 xz-libs-5.2.6-1.fc38.x86_64 zip-3.0-33.fc37.x86_64 zlib-1.2.12-5.fc38.x86_64 zstd-1.5.2-3.fc37.x86_64 Complete! Finish: dnf install Start: creating root cache Finish: creating root cache Finish: chroot init INFO: Installed packages: INFO: ansible-srpm-macros-1-7.fc38.noarch pcre2-10.40-1.fc37.1.x86_64 rpm-libs-4.18.0-1.fc38.x86_64 rpmautospec-rpm-macros-0.3.0-1.fc37.noarch fonts-srpm-macros-2.0.5-9.fc38.noarch bzip2-libs-1.0.8-12.fc37.x86_64 basesystem-11-14.fc37.noarch libsemanage-3.4-5.fc37.x86_64 libfdisk-2.38.1-2.fc38.x86_64 libbrotli-1.0.9-9.fc37.x86_64 libdb-5.3.28-53.fc37.x86_64 setup-2.14.2-1.fc38.noarch unzip-6.0-58.fc37.x86_64 binutils-gold-2.39-3.fc38.x86_64 authselect-libs-1.4.0-3.fc37.x86_64 openblas-srpm-macros-2-12.fc37.noarch libutempter-1.2.1-7.fc37.x86_64 python-srpm-macros-3.11-4.fc37.noarch gpg-pubkey-eb10b464-6202d9c6 elfutils-debuginfod-client-0.187-8.fc38.x86_64 crypto-policies-20220824-2.git2187e9c.fc38.noarch fedora-release-38-0.4.noarch debugedit-5.0-5.fc37.x86_64 lz4-libs-1.9.3-5.fc37.x86_64 efi-srpm-macros-5-6.fc37.noarch rust-srpm-macros-22-1.fc37.noarch ghc-srpm-macros-1.5.0-7.fc37.noarch perl-srpm-macros-1-46.fc37.noarch libblkid-2.38.1-2.fc38.x86_64 filesystem-3.18-2.fc37.x86_64 bzip2-1.0.8-12.fc37.x86_64 libgcc-12.2.1-2.fc38.x86_64 p11-kit-0.24.1-3.fc37.x86_64 libnghttp2-1.49.0-1.fc38.x86_64 patch-2.7.6-17.fc37.x86_64 pkgconf-pkg-config-1.8.0-3.fc37.x86_64 file-5.42-4.fc37.x86_64 cracklib-2.9.7-30.fc38.x86_64 libunistring-1.0-2.fc37.x86_64 package-notes-srpm-macros-0.5-6.fc38.noarch libssh-0.10.4-1.fc38.x86_64 ed-1.18-2.fc37.x86_64 libpkgconf-1.8.0-3.fc37.x86_64 binutils-2.39-3.fc38.x86_64 tar-1.34-3.fc36.x86_64 libnsl2-2.0.0-4.fc37.x86_64 gawk-5.1.1-4.fc37.x86_64 ocaml-srpm-macros-7-2.fc37.noarch authselect-1.4.0-3.fc37.x86_64 go-srpm-macros-3.2.0-1.fc38.noarch ncurses-base-6.3-3.20220501.fc37.noarch glibc-2.36.9000-7.fc38.x86_64 libpwquality-1.4.4-11.fc37.x86_64 keyutils-libs-1.6.1-5.fc37.x86_64 pkgconf-m4-1.8.0-3.fc37.noarch pam-libs-1.5.2-14.fc37.x86_64 ca-certificates-2022.2.54-5.fc37.noarch xz-libs-5.2.6-1.fc38.x86_64 findutils-4.9.0-2.fc37.x86_64 gzip-1.12-2.fc37.x86_64 elfutils-0.187-8.fc38.x86_64 libpsl-0.21.1-6.fc37.x86_64 gdbm-libs-1.23-2.fc37.x86_64 tzdata-2022c-1.fc38.noarch sqlite-libs-3.39.3-2.fc38.x86_64 fedora-repos-38-0.3.noarch glibc-gconv-extra-2.36.9000-7.fc38.x86_64 zlib-1.2.12-5.fc38.x86_64 libtirpc-1.3.3-0.fc37.x86_64 util-linux-2.38.1-2.fc38.x86_64 libuuid-2.38.1-2.fc38.x86_64 libsigsegv-2.14-3.fc37.x86_64 pkgconf-1.8.0-3.fc37.x86_64 zip-3.0-33.fc37.x86_64 cyrus-sasl-lib-2.1.28-8.fc38.x86_64 libverto-0.3.2-4.fc37.x86_64 libssh-config-0.10.4-1.fc38.noarch libeconf-0.4.0-4.fc37.x86_64 libtasn1-4.18.0-3.fc37.x86_64 pam-1.5.2-14.fc37.x86_64 fedora-gpg-keys-38-0.3.noarch qt5-srpm-macros-5.15.5-2.fc37.noarch lua-libs-5.4.4-4.fc37.x86_64 libsepol-3.4-3.fc37.x86_64 elfutils-default-yama-scope-0.187-8.fc38.noarch libcurl-7.85.0-1.fc38.x86_64 libgomp-12.2.1-2.fc38.x86_64 libevent-2.1.12-7.fc37.x86_64 rpm-4.18.0-1.fc38.x86_64 libffi-3.4.2-9.fc37.x86_64 rpm-build-4.18.0-1.fc38.x86_64 libarchive-3.6.1-2.fc37.x86_64 libselinux-3.4-5.fc37.x86_64 popt-1.19-1.fc38.x86_64 xxhash-libs-0.8.1-3.fc37.x86_64 libidn2-2.3.3-2.fc37.x86_64 bash-5.1.16-3.fc37.x86_64 libcap-2.48-5.fc37.x86_64 util-linux-core-2.38.1-2.fc38.x86_64 openldap-2.6.3-1.fc38.x86_64 ncurses-libs-6.3-3.20220501.fc37.x86_64 libcap-ng-0.8.3-3.fc37.x86_64 cpio-2.13-13.fc38.x86_64 libstdc++-12.2.1-2.fc38.x86_64 diffutils-3.8-3.fc37.x86_64 nim-srpm-macros-3-7.fc37.noarch curl-7.85.0-1.fc38.x86_64 pcre2-syntax-10.40-1.fc37.1.noarch libxml2-2.9.14-3.fc37.x86_64 readline-8.1-7.fc37.x86_64 alternatives-1.19-3.fc37.x86_64 fpc-srpm-macros-1.3-6.fc37.noarch glibc-common-2.36.9000-7.fc38.x86_64 openssl-libs-3.0.5-5.fc38.x86_64 systemd-libs-251.4-53.fc38.x86_64 which-2.21-35.fc37.x86_64 lua-srpm-macros-1-7.fc37.noarch gnat-srpm-macros-4-16.fc37.noarch libacl-2.3.1-4.fc37.x86_64 fedora-release-common-38-0.4.noarch libsmartcols-2.38.1-2.fc38.x86_64 zstd-1.5.2-3.fc37.x86_64 publicsuffix-list-dafsa-20210518-5.fc37.noarch krb5-libs-1.19.2-11.fc37.1.x86_64 elfutils-libs-0.187-8.fc38.x86_64 file-libs-5.42-4.fc37.x86_64 glibc-minimal-langpack-2.36.9000-7.fc38.x86_64 coreutils-9.1-8.fc38.x86_64 xz-5.2.6-1.fc38.x86_64 libcom_err-1.46.5-3.fc37.x86_64 grep-3.8-1.fc38.x86_64 libmount-2.38.1-2.fc38.x86_64 jansson-2.13.1-5.fc37.x86_64 sed-4.8-11.fc37.x86_64 libzstd-1.5.2-3.fc37.x86_64 elfutils-libelf-0.187-8.fc38.x86_64 coreutils-common-9.1-8.fc38.x86_64 info-6.8-4.fc37.x86_64 dwz-0.14-7.fc37.x86_64 rpm-build-libs-4.18.0-1.fc38.x86_64 shadow-utils-4.12.3-2.fc38.x86_64 gdb-minimal-12.1-4.fc37.x86_64 gpg-pubkey-5323552a-6112bcdc gmp-6.2.1-3.fc37.x86_64 fedora-release-identity-basic-38-0.4.noarch p11-kit-trust-0.24.1-3.fc37.x86_64 redhat-rpm-config-231-1.fc38.noarch libxcrypt-4.4.28-3.fc38.x86_64 libattr-2.5.1-5.fc37.x86_64 kernel-srpm-macros-1.0-15.fc37.noarch mpfr-4.1.0-10.fc37.x86_64 fedora-repos-rawhide-38-0.3.noarch audit-libs-3.0.9-1.fc38.x86_64 Start: buildsrpm Start: rpmbuild -bs Building target platforms: x86_64 Building for target x86_64 setting SOURCE_DATE_EPOCH=1663891200 Wrote: /builddir/build/SRPMS/python-flask-compress-1.13-2.fc38.src.rpm Finish: rpmbuild -bs INFO: chroot_scan: 3 files copied to /var/lib/copr-rpmbuild/results/chroot_scan INFO: /var/lib/mock/fedora-rawhide-x86_64-1663925790.119649/root/var/log/dnf.rpm.log /var/lib/mock/fedora-rawhide-x86_64-1663925790.119649/root/var/log/dnf.librepo.log /var/lib/mock/fedora-rawhide-x86_64-1663925790.119649/root/var/log/dnf.log Finish: buildsrpm INFO: Done(/var/lib/copr-rpmbuild/workspace/workdir-6e6y6yj_/python-flask-compress/python-flask-compress.spec) Config(child) 1 minutes 20 seconds INFO: Results and/or logs in: /var/lib/copr-rpmbuild/results INFO: Cleaning up build root ('cleanup_on_success=True') Start: clean chroot INFO: unmounting tmpfs. Finish: clean chroot Finish: run Running (timeout=18000): unbuffer mock --rebuild /var/lib/copr-rpmbuild/results/python-flask-compress-1.13-2.fc38.src.rpm --resultdir /var/lib/copr-rpmbuild/results --uniqueext 1663925790.119649 -r /var/lib/copr-rpmbuild/results/configs/child.cfg INFO: mock.py version 3.1 starting (python version = 3.10.4, NVR = mock-3.1-1.fc35)... Start(bootstrap): init plugins INFO: tmpfs initialized INFO: selinux enabled INFO: chroot_scan: initialized INFO: compress_logs: initialized Finish(bootstrap): init plugins Start: init plugins INFO: tmpfs initialized INFO: selinux enabled INFO: chroot_scan: initialized INFO: compress_logs: initialized Finish: init plugins INFO: Signal handler active Start: run INFO: Start(/var/lib/copr-rpmbuild/results/python-flask-compress-1.13-2.fc38.src.rpm) Config(fedora-rawhide-x86_64) Start: clean chroot Finish: clean chroot Start(bootstrap): chroot init INFO: mounting tmpfs at /var/lib/mock/fedora-rawhide-x86_64-bootstrap-1663925790.119649/root. INFO: reusing tmpfs at /var/lib/mock/fedora-rawhide-x86_64-bootstrap-1663925790.119649/root. INFO: calling preinit hooks INFO: enabled root cache INFO: enabled package manager cache Start(bootstrap): cleaning package manager metadata Finish(bootstrap): cleaning package manager metadata INFO: enabled HW Info plugin Mock Version: 3.1 INFO: Mock Version: 3.1 Finish(bootstrap): chroot init Start: chroot init INFO: mounting tmpfs at /var/lib/mock/fedora-rawhide-x86_64-1663925790.119649/root. INFO: calling preinit hooks INFO: enabled root cache Start: unpacking root cache Finish: unpacking root cache INFO: enabled package manager cache Start: cleaning package manager metadata Finish: cleaning package manager metadata INFO: enabled HW Info plugin Mock Version: 3.1 INFO: Mock Version: 3.1 Start: dnf update No matches found for the following disable plugin patterns: local, spacewalk, versionlock Copr repository 40 kB/s | 3.0 kB 00:00 fedora 401 kB/s | 18 kB 00:00 Dependencies resolved. Nothing to do. Complete! Finish: dnf update Finish: chroot init Start: build phase for python-flask-compress-1.13-2.fc38.src.rpm Start: build setup for python-flask-compress-1.13-2.fc38.src.rpm Building target platforms: x86_64 Building for target x86_64 setting SOURCE_DATE_EPOCH=1663891200 Wrote: /builddir/build/SRPMS/python-flask-compress-1.13-2.fc38.src.rpm No matches found for the following disable plugin patterns: local, spacewalk, versionlock Copr repository 54 kB/s | 3.0 kB 00:00 fedora 343 kB/s | 18 kB 00:00 Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: make x86_64 1:4.3-11.fc37 fedora 542 k python3-devel x86_64 3.11.0~rc2-1.fc38 fedora 269 k Installing dependencies: expat x86_64 2.4.8-2.fc37 fedora 110 k gc x86_64 8.2.2-1.fc38 fedora 110 k guile22 x86_64 2.2.7-6.fc37 fedora 6.5 M libb2 x86_64 0.98.1-7.fc37 fedora 25 k libtool-ltdl x86_64 2.4.7-2.fc37 fedora 37 k mpdecimal x86_64 2.5.1-4.fc37 fedora 102 k pyproject-rpm-macros noarch 1.3.3-1.fc38 fedora 41 k python-pip-wheel noarch 22.2.2-2.fc38 copr_base 1.4 M python-rpm-macros noarch 3.11-4.fc37 fedora 18 k python-setuptools-wheel noarch 65.3.0-1.fc38 copr_base 715 k python3 x86_64 3.11.0~rc2-1.fc38 fedora 27 k python3-libs x86_64 3.11.0~rc2-1.fc38 fedora 9.6 M python3-packaging noarch 21.3-7.fc38 copr_base 90 k python3-pyparsing noarch 3.0.9-2.fc37 fedora 262 k python3-rpm-generators noarch 13-2.fc37 fedora 30 k python3-rpm-macros noarch 3.11-4.fc37 fedora 15 k Transaction Summary ================================================================================ Install 18 Packages Total download size: 20 M Installed size: 95 M Downloading Packages: (1/18): python-setuptools-wheel-65.3.0-1.fc38.n 5.6 MB/s | 715 kB 00:00 (2/18): python-pip-wheel-22.2.2-2.fc38.noarch.r 10 MB/s | 1.4 MB 00:00 (3/18): python3-packaging-21.3-7.fc38.noarch.rp 587 kB/s | 90 kB 00:00 (4/18): expat-2.4.8-2.fc37.x86_64.rpm 922 kB/s | 110 kB 00:00 (5/18): libb2-0.98.1-7.fc37.x86_64.rpm 940 kB/s | 25 kB 00:00 (6/18): gc-8.2.2-1.fc38.x86_64.rpm 767 kB/s | 110 kB 00:00 (7/18): libtool-ltdl-2.4.7-2.fc37.x86_64.rpm 1.3 MB/s | 37 kB 00:00 (8/18): mpdecimal-2.5.1-4.fc37.x86_64.rpm 1.2 MB/s | 102 kB 00:00 (9/18): pyproject-rpm-macros-1.3.3-1.fc38.noarc 808 kB/s | 41 kB 00:00 (10/18): make-4.3-11.fc37.x86_64.rpm 3.0 MB/s | 542 kB 00:00 (11/18): python3-3.11.0~rc2-1.fc38.x86_64.rpm 1.1 MB/s | 27 kB 00:00 (12/18): python-rpm-macros-3.11-4.fc37.noarch.r 260 kB/s | 18 kB 00:00 (13/18): python3-devel-3.11.0~rc2-1.fc38.x86_64 4.3 MB/s | 269 kB 00:00 (14/18): python3-pyparsing-3.0.9-2.fc37.noarch. 7.0 MB/s | 262 kB 00:00 (15/18): python3-rpm-generators-13-2.fc37.noarc 738 kB/s | 30 kB 00:00 (16/18): python3-rpm-macros-3.11-4.fc37.noarch. 363 kB/s | 15 kB 00:00 (17/18): guile22-2.2.7-6.fc37.x86_64.rpm 13 MB/s | 6.5 MB 00:00 (18/18): python3-libs-3.11.0~rc2-1.fc38.x86_64. 12 MB/s | 9.6 MB 00:00 -------------------------------------------------------------------------------- Total 14 MB/s | 20 MB 00:01 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : 1/1 Installing : python-rpm-macros-3.11-4.fc37.noarch 1/18 Installing : python3-rpm-macros-3.11-4.fc37.noarch 2/18 Installing : pyproject-rpm-macros-1.3.3-1.fc38.noarch 3/18 Installing : mpdecimal-2.5.1-4.fc37.x86_64 4/18 Installing : libtool-ltdl-2.4.7-2.fc37.x86_64 5/18 Installing : libb2-0.98.1-7.fc37.x86_64 6/18 Installing : gc-8.2.2-1.fc38.x86_64 7/18 Installing : guile22-2.2.7-6.fc37.x86_64 8/18 Installing : expat-2.4.8-2.fc37.x86_64 9/18 Installing : python-setuptools-wheel-65.3.0-1.fc38.noarch 10/18 Installing : python-pip-wheel-22.2.2-2.fc38.noarch 11/18 Installing : python3-3.11.0~rc2-1.fc38.x86_64 12/18 Installing : python3-libs-3.11.0~rc2-1.fc38.x86_64 13/18 Installing : python3-pyparsing-3.0.9-2.fc37.noarch 14/18 Installing : python3-packaging-21.3-7.fc38.noarch 15/18 Installing : python3-rpm-generators-13-2.fc37.noarch 16/18 Installing : python3-devel-3.11.0~rc2-1.fc38.x86_64 17/18 Installing : make-1:4.3-11.fc37.x86_64 18/18 Running scriptlet: make-1:4.3-11.fc37.x86_64 18/18 Verifying : python-pip-wheel-22.2.2-2.fc38.noarch 1/18 Verifying : python-setuptools-wheel-65.3.0-1.fc38.noarch 2/18 Verifying : python3-packaging-21.3-7.fc38.noarch 3/18 Verifying : expat-2.4.8-2.fc37.x86_64 4/18 Verifying : gc-8.2.2-1.fc38.x86_64 5/18 Verifying : guile22-2.2.7-6.fc37.x86_64 6/18 Verifying : libb2-0.98.1-7.fc37.x86_64 7/18 Verifying : libtool-ltdl-2.4.7-2.fc37.x86_64 8/18 Verifying : make-1:4.3-11.fc37.x86_64 9/18 Verifying : mpdecimal-2.5.1-4.fc37.x86_64 10/18 Verifying : pyproject-rpm-macros-1.3.3-1.fc38.noarch 11/18 Verifying : python-rpm-macros-3.11-4.fc37.noarch 12/18 Verifying : python3-3.11.0~rc2-1.fc38.x86_64 13/18 Verifying : python3-devel-3.11.0~rc2-1.fc38.x86_64 14/18 Verifying : python3-libs-3.11.0~rc2-1.fc38.x86_64 15/18 Verifying : python3-pyparsing-3.0.9-2.fc37.noarch 16/18 Verifying : python3-rpm-generators-13-2.fc37.noarch 17/18 Verifying : python3-rpm-macros-3.11-4.fc37.noarch 18/18 Installed: expat-2.4.8-2.fc37.x86_64 gc-8.2.2-1.fc38.x86_64 guile22-2.2.7-6.fc37.x86_64 libb2-0.98.1-7.fc37.x86_64 libtool-ltdl-2.4.7-2.fc37.x86_64 make-1:4.3-11.fc37.x86_64 mpdecimal-2.5.1-4.fc37.x86_64 pyproject-rpm-macros-1.3.3-1.fc38.noarch python-pip-wheel-22.2.2-2.fc38.noarch python-rpm-macros-3.11-4.fc37.noarch python-setuptools-wheel-65.3.0-1.fc38.noarch python3-3.11.0~rc2-1.fc38.x86_64 python3-devel-3.11.0~rc2-1.fc38.x86_64 python3-libs-3.11.0~rc2-1.fc38.x86_64 python3-packaging-21.3-7.fc38.noarch python3-pyparsing-3.0.9-2.fc37.noarch python3-rpm-generators-13-2.fc37.noarch python3-rpm-macros-3.11-4.fc37.noarch Complete! Finish: build setup for python-flask-compress-1.13-2.fc38.src.rpm Start: rpmbuild python-flask-compress-1.13-2.fc38.src.rpm Building target platforms: x86_64 Building for target x86_64 setting SOURCE_DATE_EPOCH=1663891200 Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.ofIEHS + umask 022 + cd /builddir/build/BUILD + cd /builddir/build/BUILD + rm -rf flask-compress-1.13 + /usr/lib/rpm/rpmuncompress -x /builddir/build/SOURCES/flask-compress-1.13.tar.gz + STATUS=0 + '[' 0 -ne 0 ']' + cd flask-compress-1.13 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + /usr/lib/rpm/rpmuncompress /builddir/build/SOURCES/0001-Use-setuptools.patch + /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch -f + rm -rf flask-compress.egg-info + sed -i 's|{version}|1.13|' pyproject.toml + RPM_EC=0 ++ jobs -p + exit 0 Executing(%generate_buildrequires): /bin/sh -e /var/tmp/rpm-tmp.ZFUc43 + umask 022 + cd /builddir/build/BUILD + cd flask-compress-1.13 + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' + export CFLAGS + CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' + export CXXFLAGS + FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib64/gfortran/modules' + export FFLAGS + FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib64/gfortran/modules' + export FCFLAGS + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 ' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib64: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + echo pyproject-rpm-macros + echo python3-devel + echo 'python3dist(pip) >= 19' + echo 'python3dist(packaging)' + '[' -f pyproject.toml ']' + echo '(python3dist(toml) if python3-devel < 3.11)' + rm -rfv '*.dist-info/' + '[' -f /usr/bin/python3 ']' + mkdir -p /builddir/build/BUILD/flask-compress-1.13/.pyproject-builddir + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 ' + TMPDIR=/builddir/build/BUILD/flask-compress-1.13/.pyproject-builddir + RPM_TOXENV=py311 + HOSTNAME=rpmbuild + /usr/bin/python3 -Bs /usr/lib/rpm/redhat/pyproject_buildrequires.py --generate-extras --python3_pkgversion 3 --wheeldir /builddir/build/BUILD/flask-compress-1.13/pyproject-wheeldir -r Handling setuptools>=42 from build-system.requires Requirement not satisfied: setuptools>=42 Handling wheel from build-system.requires Requirement not satisfied: wheel Handling setuptools_scm[toml]>=3.4 from build-system.requires Requirement not satisfied: setuptools_scm[toml]>=3.4 Exiting dependency generation pass: build backend + RPM_EC=0 ++ jobs -p + exit 0 Wrote: /builddir/build/SRPMS/python-flask-compress-1.13-2.fc38.buildreqs.nosrc.rpm INFO: Going to install missing dynamic buildrequires No matches found for the following disable plugin patterns: local, spacewalk, versionlock Copr repository 50 kB/s | 3.0 kB 00:00 fedora 385 kB/s | 18 kB 00:00 Package make-1:4.3-11.fc37.x86_64 is already installed. Package pyproject-rpm-macros-1.3.3-1.fc38.noarch is already installed. Package python3-devel-3.11.0~rc2-1.fc38.x86_64 is already installed. Package python3-devel-3.11.0~rc2-1.fc38.x86_64 is already installed. Package python3-packaging-21.3-7.fc38.noarch is already installed. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: python3-pip noarch 22.2.2-2.fc38 copr_base 2.9 M python3-setuptools noarch 65.3.0-1.fc38 copr_base 1.5 M python3-setuptools_scm noarch 7.0.5-1.fc37 copr_base 95 k python3-setuptools_scm+toml noarch 7.0.5-1.fc37 copr_base 9.9 k python3-wheel noarch 1:0.37.1-4.fc37 fedora 102 k Installing dependencies: python3-tomli noarch 2.0.1-4.fc37 fedora 41 k python3-typing-extensions noarch 4.2.0-5.fc37 copr_base 56 k Transaction Summary ================================================================================ Install 7 Packages Total download size: 4.7 M Installed size: 24 M Downloading Packages: (1/7): python3-setuptools_scm+toml-7.0.5-1.fc37 70 kB/s | 9.9 kB 00:00 (2/7): python3-setuptools-65.3.0-1.fc38.noarch. 7.2 MB/s | 1.5 MB 00:00 (3/7): python3-pip-22.2.2-2.fc38.noarch.rpm 12 MB/s | 2.9 MB 00:00 (4/7): python3-typing-extensions-4.2.0-5.fc37.n 1.7 MB/s | 56 kB 00:00 (5/7): python3-setuptools_scm-7.0.5-1.fc37.noar 804 kB/s | 95 kB 00:00 (6/7): python3-tomli-2.0.1-4.fc37.noarch.rpm 359 kB/s | 41 kB 00:00 (7/7): python3-wheel-0.37.1-4.fc37.noarch.rpm 768 kB/s | 102 kB 00:00 -------------------------------------------------------------------------------- Total 10 MB/s | 4.7 MB 00:00 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : 1/1 Installing : python3-setuptools-65.3.0-1.fc38.noarch 1/7 Installing : python3-tomli-2.0.1-4.fc37.noarch 2/7 Installing : python3-typing-extensions-4.2.0-5.fc37.noarch 3/7 Installing : python3-setuptools_scm-7.0.5-1.fc37.noarch 4/7 Installing : python3-setuptools_scm+toml-7.0.5-1.fc37.noarch 5/7 Installing : python3-pip-22.2.2-2.fc38.noarch 6/7 Installing : python3-wheel-1:0.37.1-4.fc37.noarch 7/7 Running scriptlet: python3-wheel-1:0.37.1-4.fc37.noarch 7/7 Verifying : python3-pip-22.2.2-2.fc38.noarch 1/7 Verifying : python3-setuptools-65.3.0-1.fc38.noarch 2/7 Verifying : python3-setuptools_scm+toml-7.0.5-1.fc37.noarch 3/7 Verifying : python3-setuptools_scm-7.0.5-1.fc37.noarch 4/7 Verifying : python3-typing-extensions-4.2.0-5.fc37.noarch 5/7 Verifying : python3-tomli-2.0.1-4.fc37.noarch 6/7 Verifying : python3-wheel-1:0.37.1-4.fc37.noarch 7/7 Installed: python3-pip-22.2.2-2.fc38.noarch python3-setuptools-65.3.0-1.fc38.noarch python3-setuptools_scm-7.0.5-1.fc37.noarch python3-setuptools_scm+toml-7.0.5-1.fc37.noarch python3-tomli-2.0.1-4.fc37.noarch python3-typing-extensions-4.2.0-5.fc37.noarch python3-wheel-1:0.37.1-4.fc37.noarch Complete! Building target platforms: x86_64 Building for target x86_64 setting SOURCE_DATE_EPOCH=1663891200 Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.r5eEf5 + umask 022 + cd /builddir/build/BUILD + cd /builddir/build/BUILD + rm -rf flask-compress-1.13 + /usr/lib/rpm/rpmuncompress -x /builddir/build/SOURCES/flask-compress-1.13.tar.gz + STATUS=0 + '[' 0 -ne 0 ']' + cd flask-compress-1.13 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + /usr/lib/rpm/rpmuncompress /builddir/build/SOURCES/0001-Use-setuptools.patch + /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch -f + rm -rf flask-compress.egg-info + sed -i 's|{version}|1.13|' pyproject.toml + RPM_EC=0 ++ jobs -p + exit 0 Executing(%generate_buildrequires): /bin/sh -e /var/tmp/rpm-tmp.eg9MGg + umask 022 + cd /builddir/build/BUILD + cd flask-compress-1.13 + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' + export CFLAGS + CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' + export CXXFLAGS + FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib64/gfortran/modules' + export FFLAGS + FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib64/gfortran/modules' + export FCFLAGS + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 ' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib64: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + echo pyproject-rpm-macros + echo python3-devel + echo 'python3dist(pip) >= 19' + echo 'python3dist(packaging)' + '[' -f pyproject.toml ']' + echo '(python3dist(toml) if python3-devel < 3.11)' + rm -rfv '*.dist-info/' + '[' -f /usr/bin/python3 ']' + mkdir -p /builddir/build/BUILD/flask-compress-1.13/.pyproject-builddir + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 ' + TMPDIR=/builddir/build/BUILD/flask-compress-1.13/.pyproject-builddir + RPM_TOXENV=py311 + HOSTNAME=rpmbuild + /usr/bin/python3 -Bs /usr/lib/rpm/redhat/pyproject_buildrequires.py --generate-extras --python3_pkgversion 3 --wheeldir /builddir/build/BUILD/flask-compress-1.13/pyproject-wheeldir -r Handling setuptools>=42 from build-system.requires Requirement satisfied: setuptools>=42 (installed: setuptools 65.3.0) Handling wheel from build-system.requires Requirement satisfied: wheel (installed: wheel 0.37.1) Handling setuptools_scm[toml]>=3.4 from build-system.requires Requirement satisfied: setuptools_scm[toml]>=3.4 (installed: setuptools_scm 7.0.5) (extras are currently not checked) Handling wheel from get_requires_for_build_wheel Requirement satisfied: wheel (installed: wheel 0.37.1) Handling setuptools from get_requires_for_build_wheel Requirement satisfied: setuptools (installed: setuptools 65.3.0) /usr/lib/python3.11/site-packages/setuptools/config/_apply_pyprojecttoml.py:103: _WouldIgnoreField: 'readme' defined outside of `pyproject.toml` would be ignored. !! ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `readme = '# Flask-Compress\n\n[![Build](https://github.com/colour-science/flask-compress/actions/workflows/ci.yaml/badge.svg)](https://github.com/colour-science/flask-compress/actions/workflows/ci.yaml)\n[![Version](https://img.shields.io/pypi/v/flask-compress.svg)](https://pypi.python.org/pypi/Flask-Compress)\n[![Downloads](https://static.pepy.tech/badge/flask-compress)](https://pypi.python.org/pypi/Flask-Compress)\n\nFlask-Compress allows you to easily compress your [Flask](http://flask.pocoo.org/) application\'s responses with gzip, deflate or brotli. It originally started as a fork of [Flask-gzip](https://github.com/closeio/Flask-gzip).\n\nThe preferred solution is to have a server (like [Nginx](http://wiki.nginx.org/Main)) automatically compress the static files for you. If you don\'t have that option Flask-Compress will solve the problem for you.\n\n\n## How it works\n\nFlask-Compress both adds the various headers required for a compressed response and compresses the response data. \nThis makes serving compressed static files extremely easy.\n\nInternally, every time a request is made the extension will check if it matches one of the compressible MIME types\nand whether the client and the server use some common compression algorithm, and will automatically attach the \nappropriate headers.\n\nTo determine the compression algorithm, the `Accept-Encoding` request header is inspected, respecting the\nquality factor as described in [MDN docs](https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Accept-Encoding). \nIf no requested compression algorithm is supported by the server, we don\'t compress the response. If, on the other\nhand, multiple suitable algorithms are found and are requested with the same quality factor, we choose the first one\ndefined in the `COMPRESS_ALGORITHM` option (see below). \n\n\n## Installation\n\nIf you use pip then installation is simply:\n\n```shell\n$ pip install --user flask-compress\n```\n\nor, if you want the latest github version:\n\n```shell\n$ pip install --user git+git://github.com/colour-science/flask-compress.git\n```\n\nYou can also install Flask-Compress via Easy Install:\n\n```shell\n$ easy_install flask-compress\n```\n\n\n## Using Flask-Compress\n\n### Globally\n\nFlask-Compress is incredibly simple to use. In order to start compressing your Flask application\'s assets, the first thing to do is let Flask-Compress know about your [`flask.Flask`](http://flask.pocoo.org/docs/latest/api/#flask.Flask) application object.\n\n```python\nfrom flask import Flask\nfrom flask_compress import Compress\n\napp = Flask(__name__)\nCompress(app)\n```\n\nIn many cases, however, one cannot expect a Flask instance to be ready at import time, and a common pattern is to return a Flask instance from within a function only after other configuration details have been taken care of. In these cases, Flask-Compress provides a simple function, `flask_compress.Compress.init_app`, which takes your application as an argument.\n\n```python\nfrom flask import Flask\nfrom flask_compress import Compress\n\ncompress = Compress()\n\ndef start_app():\n app = Flask(__name__)\n compress.init_app(app)\n return app\n```\n\nIn terms of automatically compressing your assets, passing your [`flask.Flask`](http://flask.pocoo.org/docs/latest/api/#flask.Flask) object to the `flask_compress.Compress` object is all that needs to be done.\n\n### Per-view compression\n\nCompression is possible per view using the `@compress.compressed()` decorator. Make sure to disable global compression first.\n\n```python\nfrom flask import Flask\nfrom flask_compress import Compress\n\napp = Flask(__name__)\napp.config["COMPRESS_REGISTER"] = False # disable default compression of all eligible requests\ncompress = Compress()\ncompress.init_app(app)\n\n# Compress this view specifically\n@app.route("/test")\n@compress.compressed()\ndef view():\n pass\n```\n\n## Options\n\nWithin your Flask application\'s settings you can provide the following settings to control the behavior of Flask-Compress. None of the settings are required.\n\n| Option | Description | Default |\n| ------ | ----------- | ------- |\n| `COMPRESS_MIMETYPES` | Set the list of mimetypes to compress here. | `[`
`\'text/html\',`
`\'text/css\',`
`\'text/xml\',`
`\'application/json\',`
`\'application/javascript\'`
`]` |\n| `COMPRESS_LEVEL` | Specifies the gzip compression level. | `6` |\n| `COMPRESS_BR_LEVEL` | Specifies the Brotli compression level. Ranges from 0 to 11. | `4` |\n| `COMPRESS_BR_MODE` | For Brotli, the compression mode. The options are 0, 1, or 2. These correspond to "generic", "text" (for UTF-8 input), and "font" (for WOFF 2.0). | `0` |\n| `COMPRESS_BR_WINDOW` | For Brotli, this specifies the base-2 logarithm of the sliding window size. Ranges from 10 to 24. | `22` |\n| `COMPRESS_BR_BLOCK` | For Brotli, this provides the base-2 logarithm of the maximum input block size. If zero is provided, value will be determined based on the quality. Ranges from 16 to 24. | `0` |\n| `COMPRESS_DEFLATE_LEVEL` | Specifies the deflate compression level. | `-1` |\n| `COMPRESS_MIN_SIZE` | Specifies the minimum file size threshold for compressing files. | `500` |\n| `COMPRESS_CACHE_KEY` | Specifies the cache key method for lookup/storage of response data. | `None` |\n| `COMPRESS_CACHE_BACKEND` | Specified the backend for storing the cached response data. | `None` |\n| `COMPRESS_REGISTER` | Specifies if compression should be automatically registered. | `True` |\n| `COMPRESS_ALGORITHM` | Supported compression algorithms. | `[\'br\', \'gzip\', \'deflate\']` |\n| `COMPRESS_STREAMS` | Compress content streams. | `True` |\n'` According to the spec (see the link below), however, setuptools CANNOT consider this value unless 'readme' is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list 'readme' under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. !! warnings.warn(msg, _WouldIgnoreField) /usr/lib/python3.11/site-packages/setuptools/config/_apply_pyprojecttoml.py:103: _WouldIgnoreField: 'license' defined outside of `pyproject.toml` would be ignored. !! ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `license = 'MIT'` According to the spec (see the link below), however, setuptools CANNOT consider this value unless 'license' is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list 'license' under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. !! warnings.warn(msg, _WouldIgnoreField) /usr/lib/python3.11/site-packages/setuptools/config/_apply_pyprojecttoml.py:103: _WouldIgnoreField: 'authors' defined outside of `pyproject.toml` would be ignored. !! ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `authors = 'Thomas Mansencal'` According to the spec (see the link below), however, setuptools CANNOT consider this value unless 'authors' is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list 'authors' under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. !! warnings.warn(msg, _WouldIgnoreField) /usr/lib/python3.11/site-packages/setuptools/config/_apply_pyprojecttoml.py:103: _WouldIgnoreField: 'classifiers' defined outside of `pyproject.toml` would be ignored. !! ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `classifiers = ['Environment :: Web Environment', 'Intended Audience :: Developers', 'License :: OSI Approved :: MIT License', 'Operating System :: OS Independent', 'Programming Language :: Python :: 2', 'Programming Language :: Python :: 2.6', 'Programming Language :: Python :: 2.7', 'Programming Language :: Python :: 3', 'Programming Language :: Python :: 3.6', 'Programming Language :: Python :: 3.7', 'Programming Language :: Python :: 3.8', 'Programming Language :: Python :: 3.9', 'Topic :: Internet :: WWW/HTTP :: Dynamic Content', 'Topic :: Software Development :: Libraries :: Python Modules']` According to the spec (see the link below), however, setuptools CANNOT consider this value unless 'classifiers' is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list 'classifiers' under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. !! warnings.warn(msg, _WouldIgnoreField) /usr/lib/python3.11/site-packages/setuptools/config/_apply_pyprojecttoml.py:103: _WouldIgnoreField: 'dependencies' defined outside of `pyproject.toml` would be ignored. !! ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `dependencies = ['flask', 'brotli']` According to the spec (see the link below), however, setuptools CANNOT consider this value unless 'dependencies' is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list 'dependencies' under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. !! warnings.warn(msg, _WouldIgnoreField) HOOK STDOUT: running dist_info HOOK STDOUT: creating flask_compress.egg-info HOOK STDOUT: writing flask_compress.egg-info/PKG-INFO HOOK STDOUT: writing dependency_links to flask_compress.egg-info/dependency_links.txt HOOK STDOUT: writing requirements to flask_compress.egg-info/requires.txt HOOK STDOUT: writing top-level names to flask_compress.egg-info/top_level.txt HOOK STDOUT: writing manifest file 'flask_compress.egg-info/SOURCES.txt' HOOK STDOUT: reading manifest file 'flask_compress.egg-info/SOURCES.txt' HOOK STDOUT: adding license file 'LICENSE.txt' HOOK STDOUT: writing manifest file 'flask_compress.egg-info/SOURCES.txt' HOOK STDOUT: creating '/builddir/build/BUILD/flask-compress-1.13/flask_compress-1.13.dist-info' HOOK STDOUT: adding license file "LICENSE.txt" (matched pattern "LICEN[CS]E*") Handling flask from hook generated metadata: Requires-Dist Requirement not satisfied: flask Handling brotli from hook generated metadata: Requires-Dist Requirement not satisfied: brotli + RPM_EC=0 ++ jobs -p + exit 0 Wrote: /builddir/build/SRPMS/python-flask-compress-1.13-2.fc38.buildreqs.nosrc.rpm INFO: Going to install missing dynamic buildrequires No matches found for the following disable plugin patterns: local, spacewalk, versionlock Copr repository 51 kB/s | 3.0 kB 00:00 fedora 372 kB/s | 18 kB 00:00 Package make-1:4.3-11.fc37.x86_64 is already installed. Package pyproject-rpm-macros-1.3.3-1.fc38.noarch is already installed. Package python3-devel-3.11.0~rc2-1.fc38.x86_64 is already installed. Package python3-devel-3.11.0~rc2-1.fc38.x86_64 is already installed. Package python3-packaging-21.3-7.fc38.noarch is already installed. Package python3-pip-22.2.2-2.fc38.noarch is already installed. Package python3-setuptools-65.3.0-1.fc38.noarch is already installed. Package python3-setuptools-65.3.0-1.fc38.noarch is already installed. Package python3-setuptools_scm-7.0.5-1.fc37.noarch is already installed. Package python3-setuptools_scm+toml-7.0.5-1.fc37.noarch is already installed. Package python3-wheel-1:0.37.1-4.fc37.noarch is already installed. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: python3-brotli x86_64 1.0.9-9.fc37 fedora 319 k python3-flask noarch 1:2.2.2-1.fc37 copr_base 207 k Installing dependencies: python3-click noarch 8.1.3-1.fc37 copr_base 229 k python3-itsdangerous noarch 2.1.2-2.fc38 copr_base 41 k python3-jinja2 noarch 3.0.3-5.fc37 fedora 630 k python3-markupsafe x86_64 2.1.1-3.fc37 fedora 30 k python3-werkzeug noarch 2.2.2-1.fc37 copr_base 482 k Transaction Summary ================================================================================ Install 7 Packages Total download size: 1.9 M Installed size: 8.6 M Downloading Packages: (1/7): python3-flask-2.2.2-1.fc37.noarch.rpm 1.2 MB/s | 207 kB 00:00 (2/7): python3-itsdangerous-2.1.2-2.fc38.noarch 225 kB/s | 41 kB 00:00 (3/7): python3-click-8.1.3-1.fc37.noarch.rpm 1.1 MB/s | 229 kB 00:00 (4/7): python3-werkzeug-2.2.2-1.fc37.noarch.rpm 10 MB/s | 482 kB 00:00 (5/7): python3-markupsafe-2.1.1-3.fc37.x86_64.r 242 kB/s | 30 kB 00:00 (6/7): python3-jinja2-3.0.3-5.fc37.noarch.rpm 1.9 MB/s | 630 kB 00:00 (7/7): python3-brotli-1.0.9-9.fc37.x86_64.rpm 948 kB/s | 319 kB 00:00 -------------------------------------------------------------------------------- Total 3.3 MB/s | 1.9 MB 00:00 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : 1/1 Installing : python3-markupsafe-2.1.1-3.fc37.x86_64 1/7 Installing : python3-werkzeug-2.2.2-1.fc37.noarch 2/7 Installing : python3-jinja2-3.0.3-5.fc37.noarch 3/7 Installing : python3-itsdangerous-2.1.2-2.fc38.noarch 4/7 Installing : python3-click-8.1.3-1.fc37.noarch 5/7 Installing : python3-flask-1:2.2.2-1.fc37.noarch 6/7 Installing : python3-brotli-1.0.9-9.fc37.x86_64 7/7 Running scriptlet: python3-brotli-1.0.9-9.fc37.x86_64 7/7 Verifying : python3-click-8.1.3-1.fc37.noarch 1/7 Verifying : python3-flask-1:2.2.2-1.fc37.noarch 2/7 Verifying : python3-itsdangerous-2.1.2-2.fc38.noarch 3/7 Verifying : python3-werkzeug-2.2.2-1.fc37.noarch 4/7 Verifying : python3-brotli-1.0.9-9.fc37.x86_64 5/7 Verifying : python3-jinja2-3.0.3-5.fc37.noarch 6/7 Verifying : python3-markupsafe-2.1.1-3.fc37.x86_64 7/7 Installed: python3-brotli-1.0.9-9.fc37.x86_64 python3-click-8.1.3-1.fc37.noarch python3-flask-1:2.2.2-1.fc37.noarch python3-itsdangerous-2.1.2-2.fc38.noarch python3-jinja2-3.0.3-5.fc37.noarch python3-markupsafe-2.1.1-3.fc37.x86_64 python3-werkzeug-2.2.2-1.fc37.noarch Complete! Building target platforms: x86_64 Building for target x86_64 setting SOURCE_DATE_EPOCH=1663891200 Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Ms6Rna + umask 022 + cd /builddir/build/BUILD + cd /builddir/build/BUILD + rm -rf flask-compress-1.13 + /usr/lib/rpm/rpmuncompress -x /builddir/build/SOURCES/flask-compress-1.13.tar.gz + STATUS=0 + '[' 0 -ne 0 ']' + cd flask-compress-1.13 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + /usr/lib/rpm/rpmuncompress /builddir/build/SOURCES/0001-Use-setuptools.patch + /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch -f + rm -rf flask-compress.egg-info + sed -i 's|{version}|1.13|' pyproject.toml + RPM_EC=0 ++ jobs -p + exit 0 Executing(%generate_buildrequires): /bin/sh -e /var/tmp/rpm-tmp.PIR5o0 + umask 022 + cd /builddir/build/BUILD + cd flask-compress-1.13 + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' + export CFLAGS + CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' + export CXXFLAGS + FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib64/gfortran/modules' + export FFLAGS + FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib64/gfortran/modules' + export FCFLAGS + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 ' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib64: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + echo pyproject-rpm-macros + echo python3-devel + echo 'python3dist(pip) >= 19' + echo 'python3dist(packaging)' + '[' -f pyproject.toml ']' + echo '(python3dist(toml) if python3-devel < 3.11)' + rm -rfv '*.dist-info/' + '[' -f /usr/bin/python3 ']' + mkdir -p /builddir/build/BUILD/flask-compress-1.13/.pyproject-builddir + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 ' + TMPDIR=/builddir/build/BUILD/flask-compress-1.13/.pyproject-builddir + RPM_TOXENV=py311 + HOSTNAME=rpmbuild + /usr/bin/python3 -Bs /usr/lib/rpm/redhat/pyproject_buildrequires.py --generate-extras --python3_pkgversion 3 --wheeldir /builddir/build/BUILD/flask-compress-1.13/pyproject-wheeldir -r Handling setuptools>=42 from build-system.requires Requirement satisfied: setuptools>=42 (installed: setuptools 65.3.0) Handling wheel from build-system.requires Requirement satisfied: wheel (installed: wheel 0.37.1) Handling setuptools_scm[toml]>=3.4 from build-system.requires Requirement satisfied: setuptools_scm[toml]>=3.4 (installed: setuptools_scm 7.0.5) (extras are currently not checked) Handling wheel from get_requires_for_build_wheel Requirement satisfied: wheel (installed: wheel 0.37.1) Handling setuptools from get_requires_for_build_wheel Requirement satisfied: setuptools (installed: setuptools 65.3.0) /usr/lib/python3.11/site-packages/setuptools/config/_apply_pyprojecttoml.py:103: _WouldIgnoreField: 'readme' defined outside of `pyproject.toml` would be ignored. !! ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `readme = '# Flask-Compress\n\n[![Build](https://github.com/colour-science/flask-compress/actions/workflows/ci.yaml/badge.svg)](https://github.com/colour-science/flask-compress/actions/workflows/ci.yaml)\n[![Version](https://img.shields.io/pypi/v/flask-compress.svg)](https://pypi.python.org/pypi/Flask-Compress)\n[![Downloads](https://static.pepy.tech/badge/flask-compress)](https://pypi.python.org/pypi/Flask-Compress)\n\nFlask-Compress allows you to easily compress your [Flask](http://flask.pocoo.org/) application\'s responses with gzip, deflate or brotli. It originally started as a fork of [Flask-gzip](https://github.com/closeio/Flask-gzip).\n\nThe preferred solution is to have a server (like [Nginx](http://wiki.nginx.org/Main)) automatically compress the static files for you. If you don\'t have that option Flask-Compress will solve the problem for you.\n\n\n## How it works\n\nFlask-Compress both adds the various headers required for a compressed response and compresses the response data. \nThis makes serving compressed static files extremely easy.\n\nInternally, every time a request is made the extension will check if it matches one of the compressible MIME types\nand whether the client and the server use some common compression algorithm, and will automatically attach the \nappropriate headers.\n\nTo determine the compression algorithm, the `Accept-Encoding` request header is inspected, respecting the\nquality factor as described in [MDN docs](https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Accept-Encoding). \nIf no requested compression algorithm is supported by the server, we don\'t compress the response. If, on the other\nhand, multiple suitable algorithms are found and are requested with the same quality factor, we choose the first one\ndefined in the `COMPRESS_ALGORITHM` option (see below). \n\n\n## Installation\n\nIf you use pip then installation is simply:\n\n```shell\n$ pip install --user flask-compress\n```\n\nor, if you want the latest github version:\n\n```shell\n$ pip install --user git+git://github.com/colour-science/flask-compress.git\n```\n\nYou can also install Flask-Compress via Easy Install:\n\n```shell\n$ easy_install flask-compress\n```\n\n\n## Using Flask-Compress\n\n### Globally\n\nFlask-Compress is incredibly simple to use. In order to start compressing your Flask application\'s assets, the first thing to do is let Flask-Compress know about your [`flask.Flask`](http://flask.pocoo.org/docs/latest/api/#flask.Flask) application object.\n\n```python\nfrom flask import Flask\nfrom flask_compress import Compress\n\napp = Flask(__name__)\nCompress(app)\n```\n\nIn many cases, however, one cannot expect a Flask instance to be ready at import time, and a common pattern is to return a Flask instance from within a function only after other configuration details have been taken care of. In these cases, Flask-Compress provides a simple function, `flask_compress.Compress.init_app`, which takes your application as an argument.\n\n```python\nfrom flask import Flask\nfrom flask_compress import Compress\n\ncompress = Compress()\n\ndef start_app():\n app = Flask(__name__)\n compress.init_app(app)\n return app\n```\n\nIn terms of automatically compressing your assets, passing your [`flask.Flask`](http://flask.pocoo.org/docs/latest/api/#flask.Flask) object to the `flask_compress.Compress` object is all that needs to be done.\n\n### Per-view compression\n\nCompression is possible per view using the `@compress.compressed()` decorator. Make sure to disable global compression first.\n\n```python\nfrom flask import Flask\nfrom flask_compress import Compress\n\napp = Flask(__name__)\napp.config["COMPRESS_REGISTER"] = False # disable default compression of all eligible requests\ncompress = Compress()\ncompress.init_app(app)\n\n# Compress this view specifically\n@app.route("/test")\n@compress.compressed()\ndef view():\n pass\n```\n\n## Options\n\nWithin your Flask application\'s settings you can provide the following settings to control the behavior of Flask-Compress. None of the settings are required.\n\n| Option | Description | Default |\n| ------ | ----------- | ------- |\n| `COMPRESS_MIMETYPES` | Set the list of mimetypes to compress here. | `[`
`\'text/html\',`
`\'text/css\',`
`\'text/xml\',`
`\'application/json\',`
`\'application/javascript\'`
`]` |\n| `COMPRESS_LEVEL` | Specifies the gzip compression level. | `6` |\n| `COMPRESS_BR_LEVEL` | Specifies the Brotli compression level. Ranges from 0 to 11. | `4` |\n| `COMPRESS_BR_MODE` | For Brotli, the compression mode. The options are 0, 1, or 2. These correspond to "generic", "text" (for UTF-8 input), and "font" (for WOFF 2.0). | `0` |\n| `COMPRESS_BR_WINDOW` | For Brotli, this specifies the base-2 logarithm of the sliding window size. Ranges from 10 to 24. | `22` |\n| `COMPRESS_BR_BLOCK` | For Brotli, this provides the base-2 logarithm of the maximum input block size. If zero is provided, value will be determined based on the quality. Ranges from 16 to 24. | `0` |\n| `COMPRESS_DEFLATE_LEVEL` | Specifies the deflate compression level. | `-1` |\n| `COMPRESS_MIN_SIZE` | Specifies the minimum file size threshold for compressing files. | `500` |\n| `COMPRESS_CACHE_KEY` | Specifies the cache key method for lookup/storage of response data. | `None` |\n| `COMPRESS_CACHE_BACKEND` | Specified the backend for storing the cached response data. | `None` |\n| `COMPRESS_REGISTER` | Specifies if compression should be automatically registered. | `True` |\n| `COMPRESS_ALGORITHM` | Supported compression algorithms. | `[\'br\', \'gzip\', \'deflate\']` |\n| `COMPRESS_STREAMS` | Compress content streams. | `True` |\n'` According to the spec (see the link below), however, setuptools CANNOT consider this value unless 'readme' is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list 'readme' under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. !! warnings.warn(msg, _WouldIgnoreField) /usr/lib/python3.11/site-packages/setuptools/config/_apply_pyprojecttoml.py:103: _WouldIgnoreField: 'license' defined outside of `pyproject.toml` would be ignored. !! ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `license = 'MIT'` According to the spec (see the link below), however, setuptools CANNOT consider this value unless 'license' is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list 'license' under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. !! warnings.warn(msg, _WouldIgnoreField) /usr/lib/python3.11/site-packages/setuptools/config/_apply_pyprojecttoml.py:103: _WouldIgnoreField: 'authors' defined outside of `pyproject.toml` would be ignored. !! ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `authors = 'Thomas Mansencal'` According to the spec (see the link below), however, setuptools CANNOT consider this value unless 'authors' is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list 'authors' under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. !! warnings.warn(msg, _WouldIgnoreField) /usr/lib/python3.11/site-packages/setuptools/config/_apply_pyprojecttoml.py:103: _WouldIgnoreField: 'classifiers' defined outside of `pyproject.toml` would be ignored. !! ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `classifiers = ['Environment :: Web Environment', 'Intended Audience :: Developers', 'License :: OSI Approved :: MIT License', 'Operating System :: OS Independent', 'Programming Language :: Python :: 2', 'Programming Language :: Python :: 2.6', 'Programming Language :: Python :: 2.7', 'Programming Language :: Python :: 3', 'Programming Language :: Python :: 3.6', 'Programming Language :: Python :: 3.7', 'Programming Language :: Python :: 3.8', 'Programming Language :: Python :: 3.9', 'Topic :: Internet :: WWW/HTTP :: Dynamic Content', 'Topic :: Software Development :: Libraries :: Python Modules']` According to the spec (see the link below), however, setuptools CANNOT consider this value unless 'classifiers' is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list 'classifiers' under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. !! warnings.warn(msg, _WouldIgnoreField) /usr/lib/python3.11/site-packages/setuptools/config/_apply_pyprojecttoml.py:103: _WouldIgnoreField: 'dependencies' defined outside of `pyproject.toml` would be ignored. !! ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `dependencies = ['flask', 'brotli']` According to the spec (see the link below), however, setuptools CANNOT consider this value unless 'dependencies' is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list 'dependencies' under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. !! warnings.warn(msg, _WouldIgnoreField) HOOK STDOUT: running dist_info HOOK STDOUT: creating flask_compress.egg-info HOOK STDOUT: writing flask_compress.egg-info/PKG-INFO HOOK STDOUT: writing dependency_links to flask_compress.egg-info/dependency_links.txt HOOK STDOUT: writing requirements to flask_compress.egg-info/requires.txt HOOK STDOUT: writing top-level names to flask_compress.egg-info/top_level.txt HOOK STDOUT: writing manifest file 'flask_compress.egg-info/SOURCES.txt' HOOK STDOUT: reading manifest file 'flask_compress.egg-info/SOURCES.txt' HOOK STDOUT: adding license file 'LICENSE.txt' HOOK STDOUT: writing manifest file 'flask_compress.egg-info/SOURCES.txt' HOOK STDOUT: creating '/builddir/build/BUILD/flask-compress-1.13/flask_compress-1.13.dist-info' HOOK STDOUT: adding license file "LICENSE.txt" (matched pattern "LICEN[CS]E*") Handling flask from hook generated metadata: Requires-Dist Requirement satisfied: flask (installed: flask 2.2.2) Handling brotli from hook generated metadata: Requires-Dist Requirement satisfied: brotli (installed: brotli 1.0.9) + RPM_EC=0 ++ jobs -p + exit 0 Wrote: /builddir/build/SRPMS/python-flask-compress-1.13-2.fc38.buildreqs.nosrc.rpm INFO: Going to install missing dynamic buildrequires No matches found for the following disable plugin patterns: local, spacewalk, versionlock Copr repository 55 kB/s | 3.0 kB 00:00 fedora 386 kB/s | 18 kB 00:00 Package make-1:4.3-11.fc37.x86_64 is already installed. Package pyproject-rpm-macros-1.3.3-1.fc38.noarch is already installed. Package python3-devel-3.11.0~rc2-1.fc38.x86_64 is already installed. Package python3-devel-3.11.0~rc2-1.fc38.x86_64 is already installed. Package python3-brotli-1.0.9-9.fc37.x86_64 is already installed. Package python3-flask-1:2.2.2-1.fc37.noarch is already installed. Package python3-packaging-21.3-7.fc38.noarch is already installed. Package python3-pip-22.2.2-2.fc38.noarch is already installed. Package python3-setuptools-65.3.0-1.fc38.noarch is already installed. Package python3-setuptools-65.3.0-1.fc38.noarch is already installed. Package python3-setuptools_scm-7.0.5-1.fc37.noarch is already installed. Package python3-setuptools_scm+toml-7.0.5-1.fc37.noarch is already installed. Package python3-wheel-1:0.37.1-4.fc37.noarch is already installed. Dependencies resolved. Nothing to do. Complete! Building target platforms: x86_64 Building for target x86_64 setting SOURCE_DATE_EPOCH=1663891200 Executing(%generate_buildrequires): /bin/sh -e /var/tmp/rpm-tmp.wTG2UT + umask 022 + cd /builddir/build/BUILD + cd flask-compress-1.13 + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' + export CFLAGS + CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' + export CXXFLAGS + FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib64/gfortran/modules' + export FFLAGS + FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib64/gfortran/modules' + export FCFLAGS + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 ' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib64: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + echo pyproject-rpm-macros + echo python3-devel + echo 'python3dist(pip) >= 19' + echo 'python3dist(packaging)' + '[' -f pyproject.toml ']' + echo '(python3dist(toml) if python3-devel < 3.11)' + rm -rfv flask_compress-1.13.dist-info/ removed 'flask_compress-1.13.dist-info/LICENSE.txt' removed 'flask_compress-1.13.dist-info/METADATA' removed 'flask_compress-1.13.dist-info/top_level.txt' removed directory 'flask_compress-1.13.dist-info/' + '[' -f /usr/bin/python3 ']' + mkdir -p /builddir/build/BUILD/flask-compress-1.13/.pyproject-builddir + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 ' + TMPDIR=/builddir/build/BUILD/flask-compress-1.13/.pyproject-builddir + RPM_TOXENV=py311 + HOSTNAME=rpmbuild + /usr/bin/python3 -Bs /usr/lib/rpm/redhat/pyproject_buildrequires.py --generate-extras --python3_pkgversion 3 --wheeldir /builddir/build/BUILD/flask-compress-1.13/pyproject-wheeldir -r Handling setuptools>=42 from build-system.requires Requirement satisfied: setuptools>=42 (installed: setuptools 65.3.0) Handling wheel from build-system.requires Requirement satisfied: wheel (installed: wheel 0.37.1) Handling setuptools_scm[toml]>=3.4 from build-system.requires Requirement satisfied: setuptools_scm[toml]>=3.4 (installed: setuptools_scm 7.0.5) (extras are currently not checked) Handling wheel from get_requires_for_build_wheel Requirement satisfied: wheel (installed: wheel 0.37.1) Handling setuptools from get_requires_for_build_wheel Requirement satisfied: setuptools (installed: setuptools 65.3.0) /usr/lib/python3.11/site-packages/setuptools/config/_apply_pyprojecttoml.py:103: _WouldIgnoreField: 'readme' defined outside of `pyproject.toml` would be ignored. !! ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `readme = '# Flask-Compress\n\n[![Build](https://github.com/colour-science/flask-compress/actions/workflows/ci.yaml/badge.svg)](https://github.com/colour-science/flask-compress/actions/workflows/ci.yaml)\n[![Version](https://img.shields.io/pypi/v/flask-compress.svg)](https://pypi.python.org/pypi/Flask-Compress)\n[![Downloads](https://static.pepy.tech/badge/flask-compress)](https://pypi.python.org/pypi/Flask-Compress)\n\nFlask-Compress allows you to easily compress your [Flask](http://flask.pocoo.org/) application\'s responses with gzip, deflate or brotli. It originally started as a fork of [Flask-gzip](https://github.com/closeio/Flask-gzip).\n\nThe preferred solution is to have a server (like [Nginx](http://wiki.nginx.org/Main)) automatically compress the static files for you. If you don\'t have that option Flask-Compress will solve the problem for you.\n\n\n## How it works\n\nFlask-Compress both adds the various headers required for a compressed response and compresses the response data. \nThis makes serving compressed static files extremely easy.\n\nInternally, every time a request is made the extension will check if it matches one of the compressible MIME types\nand whether the client and the server use some common compression algorithm, and will automatically attach the \nappropriate headers.\n\nTo determine the compression algorithm, the `Accept-Encoding` request header is inspected, respecting the\nquality factor as described in [MDN docs](https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Accept-Encoding). \nIf no requested compression algorithm is supported by the server, we don\'t compress the response. If, on the other\nhand, multiple suitable algorithms are found and are requested with the same quality factor, we choose the first one\ndefined in the `COMPRESS_ALGORITHM` option (see below). \n\n\n## Installation\n\nIf you use pip then installation is simply:\n\n```shell\n$ pip install --user flask-compress\n```\n\nor, if you want the latest github version:\n\n```shell\n$ pip install --user git+git://github.com/colour-science/flask-compress.git\n```\n\nYou can also install Flask-Compress via Easy Install:\n\n```shell\n$ easy_install flask-compress\n```\n\n\n## Using Flask-Compress\n\n### Globally\n\nFlask-Compress is incredibly simple to use. In order to start compressing your Flask application\'s assets, the first thing to do is let Flask-Compress know about your [`flask.Flask`](http://flask.pocoo.org/docs/latest/api/#flask.Flask) application object.\n\n```python\nfrom flask import Flask\nfrom flask_compress import Compress\n\napp = Flask(__name__)\nCompress(app)\n```\n\nIn many cases, however, one cannot expect a Flask instance to be ready at import time, and a common pattern is to return a Flask instance from within a function only after other configuration details have been taken care of. In these cases, Flask-Compress provides a simple function, `flask_compress.Compress.init_app`, which takes your application as an argument.\n\n```python\nfrom flask import Flask\nfrom flask_compress import Compress\n\ncompress = Compress()\n\ndef start_app():\n app = Flask(__name__)\n compress.init_app(app)\n return app\n```\n\nIn terms of automatically compressing your assets, passing your [`flask.Flask`](http://flask.pocoo.org/docs/latest/api/#flask.Flask) object to the `flask_compress.Compress` object is all that needs to be done.\n\n### Per-view compression\n\nCompression is possible per view using the `@compress.compressed()` decorator. Make sure to disable global compression first.\n\n```python\nfrom flask import Flask\nfrom flask_compress import Compress\n\napp = Flask(__name__)\napp.config["COMPRESS_REGISTER"] = False # disable default compression of all eligible requests\ncompress = Compress()\ncompress.init_app(app)\n\n# Compress this view specifically\n@app.route("/test")\n@compress.compressed()\ndef view():\n pass\n```\n\n## Options\n\nWithin your Flask application\'s settings you can provide the following settings to control the behavior of Flask-Compress. None of the settings are required.\n\n| Option | Description | Default |\n| ------ | ----------- | ------- |\n| `COMPRESS_MIMETYPES` | Set the list of mimetypes to compress here. | `[`
`\'text/html\',`
`\'text/css\',`
`\'text/xml\',`
`\'application/json\',`
`\'application/javascript\'`
`]` |\n| `COMPRESS_LEVEL` | Specifies the gzip compression level. | `6` |\n| `COMPRESS_BR_LEVEL` | Specifies the Brotli compression level. Ranges from 0 to 11. | `4` |\n| `COMPRESS_BR_MODE` | For Brotli, the compression mode. The options are 0, 1, or 2. These correspond to "generic", "text" (for UTF-8 input), and "font" (for WOFF 2.0). | `0` |\n| `COMPRESS_BR_WINDOW` | For Brotli, this specifies the base-2 logarithm of the sliding window size. Ranges from 10 to 24. | `22` |\n| `COMPRESS_BR_BLOCK` | For Brotli, this provides the base-2 logarithm of the maximum input block size. If zero is provided, value will be determined based on the quality. Ranges from 16 to 24. | `0` |\n| `COMPRESS_DEFLATE_LEVEL` | Specifies the deflate compression level. | `-1` |\n| `COMPRESS_MIN_SIZE` | Specifies the minimum file size threshold for compressing files. | `500` |\n| `COMPRESS_CACHE_KEY` | Specifies the cache key method for lookup/storage of response data. | `None` |\n| `COMPRESS_CACHE_BACKEND` | Specified the backend for storing the cached response data. | `None` |\n| `COMPRESS_REGISTER` | Specifies if compression should be automatically registered. | `True` |\n| `COMPRESS_ALGORITHM` | Supported compression algorithms. | `[\'br\', \'gzip\', \'deflate\']` |\n| `COMPRESS_STREAMS` | Compress content streams. | `True` |\n'` According to the spec (see the link below), however, setuptools CANNOT consider this value unless 'readme' is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list 'readme' under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. !! warnings.warn(msg, _WouldIgnoreField) /usr/lib/python3.11/site-packages/setuptools/config/_apply_pyprojecttoml.py:103: _WouldIgnoreField: 'license' defined outside of `pyproject.toml` would be ignored. !! ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `license = 'MIT'` According to the spec (see the link below), however, setuptools CANNOT consider this value unless 'license' is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list 'license' under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. !! warnings.warn(msg, _WouldIgnoreField) /usr/lib/python3.11/site-packages/setuptools/config/_apply_pyprojecttoml.py:103: _WouldIgnoreField: 'authors' defined outside of `pyproject.toml` would be ignored. !! ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `authors = 'Thomas Mansencal'` According to the spec (see the link below), however, setuptools CANNOT consider this value unless 'authors' is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list 'authors' under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. !! warnings.warn(msg, _WouldIgnoreField) /usr/lib/python3.11/site-packages/setuptools/config/_apply_pyprojecttoml.py:103: _WouldIgnoreField: 'classifiers' defined outside of `pyproject.toml` would be ignored. !! ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `classifiers = ['Environment :: Web Environment', 'Intended Audience :: Developers', 'License :: OSI Approved :: MIT License', 'Operating System :: OS Independent', 'Programming Language :: Python :: 2', 'Programming Language :: Python :: 2.6', 'Programming Language :: Python :: 2.7', 'Programming Language :: Python :: 3', 'Programming Language :: Python :: 3.6', 'Programming Language :: Python :: 3.7', 'Programming Language :: Python :: 3.8', 'Programming Language :: Python :: 3.9', 'Topic :: Internet :: WWW/HTTP :: Dynamic Content', 'Topic :: Software Development :: Libraries :: Python Modules']` According to the spec (see the link below), however, setuptools CANNOT consider this value unless 'classifiers' is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list 'classifiers' under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. !! warnings.warn(msg, _WouldIgnoreField) /usr/lib/python3.11/site-packages/setuptools/config/_apply_pyprojecttoml.py:103: _WouldIgnoreField: 'dependencies' defined outside of `pyproject.toml` would be ignored. !! ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `dependencies = ['flask', 'brotli']` According to the spec (see the link below), however, setuptools CANNOT consider this value unless 'dependencies' is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list 'dependencies' under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. !! warnings.warn(msg, _WouldIgnoreField) HOOK STDOUT: running dist_info HOOK STDOUT: writing flask_compress.egg-info/PKG-INFO HOOK STDOUT: writing dependency_links to flask_compress.egg-info/dependency_links.txt HOOK STDOUT: writing requirements to flask_compress.egg-info/requires.txt HOOK STDOUT: writing top-level names to flask_compress.egg-info/top_level.txt HOOK STDOUT: reading manifest file 'flask_compress.egg-info/SOURCES.txt' HOOK STDOUT: adding license file 'LICENSE.txt' HOOK STDOUT: writing manifest file 'flask_compress.egg-info/SOURCES.txt' HOOK STDOUT: creating '/builddir/build/BUILD/flask-compress-1.13/flask_compress-1.13.dist-info' HOOK STDOUT: adding license file "LICENSE.txt" (matched pattern "LICEN[CS]E*") Handling flask from hook generated metadata: Requires-Dist Requirement satisfied: flask (installed: flask 2.2.2) Handling brotli from hook generated metadata: Requires-Dist Requirement satisfied: brotli (installed: brotli 1.0.9) + RPM_EC=0 ++ jobs -p + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.SutGpo + umask 022 + cd /builddir/build/BUILD + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' + export CFLAGS + CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' + export CXXFLAGS + FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib64/gfortran/modules' + export FFLAGS + FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib64/gfortran/modules' + export FCFLAGS + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib64: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd flask-compress-1.13 + mkdir -p /builddir/build/BUILD/flask-compress-1.13/.pyproject-builddir + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes' + TMPDIR=/builddir/build/BUILD/flask-compress-1.13/.pyproject-builddir + /usr/bin/python3 -Bs /usr/lib/rpm/redhat/pyproject_wheel.py /builddir/build/BUILD/flask-compress-1.13/pyproject-wheeldir Processing /builddir/build/BUILD/flask-compress-1.13 Preparing metadata (pyproject.toml): started Running command Preparing metadata (pyproject.toml) /usr/lib/python3.11/site-packages/setuptools/config/_apply_pyprojecttoml.py:103: _WouldIgnoreField: 'readme' defined outside of `pyproject.toml` would be ignored. !! ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `readme = '# Flask-Compress\n\n[![Build](https://github.com/colour-science/flask-compress/actions/workflows/ci.yaml/badge.svg)](https://github.com/colour-science/flask-compress/actions/workflows/ci.yaml)\n[![Version](https://img.shields.io/pypi/v/flask-compress.svg)](https://pypi.python.org/pypi/Flask-Compress)\n[![Downloads](https://static.pepy.tech/badge/flask-compress)](https://pypi.python.org/pypi/Flask-Compress)\n\nFlask-Compress allows you to easily compress your [Flask](http://flask.pocoo.org/) application\'s responses with gzip, deflate or brotli. It originally started as a fork of [Flask-gzip](https://github.com/closeio/Flask-gzip).\n\nThe preferred solution is to have a server (like [Nginx](http://wiki.nginx.org/Main)) automatically compress the static files for you. If you don\'t have that option Flask-Compress will solve the problem for you.\n\n\n## How it works\n\nFlask-Compress both adds the various headers required for a compressed response and compresses the response data. \nThis makes serving compressed static files extremely easy.\n\nInternally, every time a request is made the extension will check if it matches one of the compressible MIME types\nand whether the client and the server use some common compression algorithm, and will automatically attach the \nappropriate headers.\n\nTo determine the compression algorithm, the `Accept-Encoding` request header is inspected, respecting the\nquality factor as described in [MDN docs](https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Accept-Encoding). \nIf no requested compression algorithm is supported by the server, we don\'t compress the response. If, on the other\nhand, multiple suitable algorithms are found and are requested with the same quality factor, we choose the first one\ndefined in the `COMPRESS_ALGORITHM` option (see below). \n\n\n## Installation\n\nIf you use pip then installation is simply:\n\n```shell\n$ pip install --user flask-compress\n```\n\nor, if you want the latest github version:\n\n```shell\n$ pip install --user git+git://github.com/colour-science/flask-compress.git\n```\n\nYou can also install Flask-Compress via Easy Install:\n\n```shell\n$ easy_install flask-compress\n```\n\n\n## Using Flask-Compress\n\n### Globally\n\nFlask-Compress is incredibly simple to use. In order to start compressing your Flask application\'s assets, the first thing to do is let Flask-Compress know about your [`flask.Flask`](http://flask.pocoo.org/docs/latest/api/#flask.Flask) application object.\n\n```python\nfrom flask import Flask\nfrom flask_compress import Compress\n\napp = Flask(__name__)\nCompress(app)\n```\n\nIn many cases, however, one cannot expect a Flask instance to be ready at import time, and a common pattern is to return a Flask instance from within a function only after other configuration details have been taken care of. In these cases, Flask-Compress provides a simple function, `flask_compress.Compress.init_app`, which takes your application as an argument.\n\n```python\nfrom flask import Flask\nfrom flask_compress import Compress\n\ncompress = Compress()\n\ndef start_app():\n app = Flask(__name__)\n compress.init_app(app)\n return app\n```\n\nIn terms of automatically compressing your assets, passing your [`flask.Flask`](http://flask.pocoo.org/docs/latest/api/#flask.Flask) object to the `flask_compress.Compress` object is all that needs to be done.\n\n### Per-view compression\n\nCompression is possible per view using the `@compress.compressed()` decorator. Make sure to disable global compression first.\n\n```python\nfrom flask import Flask\nfrom flask_compress import Compress\n\napp = Flask(__name__)\napp.config["COMPRESS_REGISTER"] = False # disable default compression of all eligible requests\ncompress = Compress()\ncompress.init_app(app)\n\n# Compress this view specifically\n@app.route("/test")\n@compress.compressed()\ndef view():\n pass\n```\n\n## Options\n\nWithin your Flask application\'s settings you can provide the following settings to control the behavior of Flask-Compress. None of the settings are required.\n\n| Option | Description | Default |\n| ------ | ----------- | ------- |\n| `COMPRESS_MIMETYPES` | Set the list of mimetypes to compress here. | `[`
`\'text/html\',`
`\'text/css\',`
`\'text/xml\',`
`\'application/json\',`
`\'application/javascript\'`
`]` |\n| `COMPRESS_LEVEL` | Specifies the gzip compression level. | `6` |\n| `COMPRESS_BR_LEVEL` | Specifies the Brotli compression level. Ranges from 0 to 11. | `4` |\n| `COMPRESS_BR_MODE` | For Brotli, the compression mode. The options are 0, 1, or 2. These correspond to "generic", "text" (for UTF-8 input), and "font" (for WOFF 2.0). | `0` |\n| `COMPRESS_BR_WINDOW` | For Brotli, this specifies the base-2 logarithm of the sliding window size. Ranges from 10 to 24. | `22` |\n| `COMPRESS_BR_BLOCK` | For Brotli, this provides the base-2 logarithm of the maximum input block size. If zero is provided, value will be determined based on the quality. Ranges from 16 to 24. | `0` |\n| `COMPRESS_DEFLATE_LEVEL` | Specifies the deflate compression level. | `-1` |\n| `COMPRESS_MIN_SIZE` | Specifies the minimum file size threshold for compressing files. | `500` |\n| `COMPRESS_CACHE_KEY` | Specifies the cache key method for lookup/storage of response data. | `None` |\n| `COMPRESS_CACHE_BACKEND` | Specified the backend for storing the cached response data. | `None` |\n| `COMPRESS_REGISTER` | Specifies if compression should be automatically registered. | `True` |\n| `COMPRESS_ALGORITHM` | Supported compression algorithms. | `[\'br\', \'gzip\', \'deflate\']` |\n| `COMPRESS_STREAMS` | Compress content streams. | `True` |\n'` According to the spec (see the link below), however, setuptools CANNOT consider this value unless 'readme' is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list 'readme' under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. !! warnings.warn(msg, _WouldIgnoreField) /usr/lib/python3.11/site-packages/setuptools/config/_apply_pyprojecttoml.py:103: _WouldIgnoreField: 'license' defined outside of `pyproject.toml` would be ignored. !! ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `license = 'MIT'` According to the spec (see the link below), however, setuptools CANNOT consider this value unless 'license' is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list 'license' under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. !! warnings.warn(msg, _WouldIgnoreField) /usr/lib/python3.11/site-packages/setuptools/config/_apply_pyprojecttoml.py:103: _WouldIgnoreField: 'authors' defined outside of `pyproject.toml` would be ignored. !! ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `authors = 'Thomas Mansencal'` According to the spec (see the link below), however, setuptools CANNOT consider this value unless 'authors' is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list 'authors' under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. !! warnings.warn(msg, _WouldIgnoreField) /usr/lib/python3.11/site-packages/setuptools/config/_apply_pyprojecttoml.py:103: _WouldIgnoreField: 'classifiers' defined outside of `pyproject.toml` would be ignored. !! ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `classifiers = ['Environment :: Web Environment', 'Intended Audience :: Developers', 'License :: OSI Approved :: MIT License', 'Operating System :: OS Independent', 'Programming Language :: Python :: 2', 'Programming Language :: Python :: 2.6', 'Programming Language :: Python :: 2.7', 'Programming Language :: Python :: 3', 'Programming Language :: Python :: 3.6', 'Programming Language :: Python :: 3.7', 'Programming Language :: Python :: 3.8', 'Programming Language :: Python :: 3.9', 'Topic :: Internet :: WWW/HTTP :: Dynamic Content', 'Topic :: Software Development :: Libraries :: Python Modules']` According to the spec (see the link below), however, setuptools CANNOT consider this value unless 'classifiers' is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list 'classifiers' under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. !! warnings.warn(msg, _WouldIgnoreField) /usr/lib/python3.11/site-packages/setuptools/config/_apply_pyprojecttoml.py:103: _WouldIgnoreField: 'dependencies' defined outside of `pyproject.toml` would be ignored. !! ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `dependencies = ['flask', 'brotli']` According to the spec (see the link below), however, setuptools CANNOT consider this value unless 'dependencies' is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list 'dependencies' under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. !! warnings.warn(msg, _WouldIgnoreField) running dist_info creating /builddir/build/BUILD/flask-compress-1.13/.pyproject-builddir/pip-modern-metadata-d1jm9l6e/flask_compress.egg-info writing /builddir/build/BUILD/flask-compress-1.13/.pyproject-builddir/pip-modern-metadata-d1jm9l6e/flask_compress.egg-info/PKG-INFO writing dependency_links to /builddir/build/BUILD/flask-compress-1.13/.pyproject-builddir/pip-modern-metadata-d1jm9l6e/flask_compress.egg-info/dependency_links.txt writing requirements to /builddir/build/BUILD/flask-compress-1.13/.pyproject-builddir/pip-modern-metadata-d1jm9l6e/flask_compress.egg-info/requires.txt writing top-level names to /builddir/build/BUILD/flask-compress-1.13/.pyproject-builddir/pip-modern-metadata-d1jm9l6e/flask_compress.egg-info/top_level.txt writing manifest file '/builddir/build/BUILD/flask-compress-1.13/.pyproject-builddir/pip-modern-metadata-d1jm9l6e/flask_compress.egg-info/SOURCES.txt' reading manifest file '/builddir/build/BUILD/flask-compress-1.13/.pyproject-builddir/pip-modern-metadata-d1jm9l6e/flask_compress.egg-info/SOURCES.txt' adding license file 'LICENSE.txt' writing manifest file '/builddir/build/BUILD/flask-compress-1.13/.pyproject-builddir/pip-modern-metadata-d1jm9l6e/flask_compress.egg-info/SOURCES.txt' creating '/builddir/build/BUILD/flask-compress-1.13/.pyproject-builddir/pip-modern-metadata-d1jm9l6e/flask_compress-1.13.dist-info' adding license file "LICENSE.txt" (matched pattern "LICEN[CS]E*") Preparing metadata (pyproject.toml): finished with status 'done' Building wheels for collected packages: flask-compress Building wheel for flask-compress (pyproject.toml): started Running command Building wheel for flask-compress (pyproject.toml) /usr/lib/python3.11/site-packages/setuptools/config/_apply_pyprojecttoml.py:103: _WouldIgnoreField: 'readme' defined outside of `pyproject.toml` would be ignored. !! ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `readme = '# Flask-Compress\n\n[![Build](https://github.com/colour-science/flask-compress/actions/workflows/ci.yaml/badge.svg)](https://github.com/colour-science/flask-compress/actions/workflows/ci.yaml)\n[![Version](https://img.shields.io/pypi/v/flask-compress.svg)](https://pypi.python.org/pypi/Flask-Compress)\n[![Downloads](https://static.pepy.tech/badge/flask-compress)](https://pypi.python.org/pypi/Flask-Compress)\n\nFlask-Compress allows you to easily compress your [Flask](http://flask.pocoo.org/) application\'s responses with gzip, deflate or brotli. It originally started as a fork of [Flask-gzip](https://github.com/closeio/Flask-gzip).\n\nThe preferred solution is to have a server (like [Nginx](http://wiki.nginx.org/Main)) automatically compress the static files for you. If you don\'t have that option Flask-Compress will solve the problem for you.\n\n\n## How it works\n\nFlask-Compress both adds the various headers required for a compressed response and compresses the response data. \nThis makes serving compressed static files extremely easy.\n\nInternally, every time a request is made the extension will check if it matches one of the compressible MIME types\nand whether the client and the server use some common compression algorithm, and will automatically attach the \nappropriate headers.\n\nTo determine the compression algorithm, the `Accept-Encoding` request header is inspected, respecting the\nquality factor as described in [MDN docs](https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Accept-Encoding). \nIf no requested compression algorithm is supported by the server, we don\'t compress the response. If, on the other\nhand, multiple suitable algorithms are found and are requested with the same quality factor, we choose the first one\ndefined in the `COMPRESS_ALGORITHM` option (see below). \n\n\n## Installation\n\nIf you use pip then installation is simply:\n\n```shell\n$ pip install --user flask-compress\n```\n\nor, if you want the latest github version:\n\n```shell\n$ pip install --user git+git://github.com/colour-science/flask-compress.git\n```\n\nYou can also install Flask-Compress via Easy Install:\n\n```shell\n$ easy_install flask-compress\n```\n\n\n## Using Flask-Compress\n\n### Globally\n\nFlask-Compress is incredibly simple to use. In order to start compressing your Flask application\'s assets, the first thing to do is let Flask-Compress know about your [`flask.Flask`](http://flask.pocoo.org/docs/latest/api/#flask.Flask) application object.\n\n```python\nfrom flask import Flask\nfrom flask_compress import Compress\n\napp = Flask(__name__)\nCompress(app)\n```\n\nIn many cases, however, one cannot expect a Flask instance to be ready at import time, and a common pattern is to return a Flask instance from within a function only after other configuration details have been taken care of. In these cases, Flask-Compress provides a simple function, `flask_compress.Compress.init_app`, which takes your application as an argument.\n\n```python\nfrom flask import Flask\nfrom flask_compress import Compress\n\ncompress = Compress()\n\ndef start_app():\n app = Flask(__name__)\n compress.init_app(app)\n return app\n```\n\nIn terms of automatically compressing your assets, passing your [`flask.Flask`](http://flask.pocoo.org/docs/latest/api/#flask.Flask) object to the `flask_compress.Compress` object is all that needs to be done.\n\n### Per-view compression\n\nCompression is possible per view using the `@compress.compressed()` decorator. Make sure to disable global compression first.\n\n```python\nfrom flask import Flask\nfrom flask_compress import Compress\n\napp = Flask(__name__)\napp.config["COMPRESS_REGISTER"] = False # disable default compression of all eligible requests\ncompress = Compress()\ncompress.init_app(app)\n\n# Compress this view specifically\n@app.route("/test")\n@compress.compressed()\ndef view():\n pass\n```\n\n## Options\n\nWithin your Flask application\'s settings you can provide the following settings to control the behavior of Flask-Compress. None of the settings are required.\n\n| Option | Description | Default |\n| ------ | ----------- | ------- |\n| `COMPRESS_MIMETYPES` | Set the list of mimetypes to compress here. | `[`
`\'text/html\',`
`\'text/css\',`
`\'text/xml\',`
`\'application/json\',`
`\'application/javascript\'`
`]` |\n| `COMPRESS_LEVEL` | Specifies the gzip compression level. | `6` |\n| `COMPRESS_BR_LEVEL` | Specifies the Brotli compression level. Ranges from 0 to 11. | `4` |\n| `COMPRESS_BR_MODE` | For Brotli, the compression mode. The options are 0, 1, or 2. These correspond to "generic", "text" (for UTF-8 input), and "font" (for WOFF 2.0). | `0` |\n| `COMPRESS_BR_WINDOW` | For Brotli, this specifies the base-2 logarithm of the sliding window size. Ranges from 10 to 24. | `22` |\n| `COMPRESS_BR_BLOCK` | For Brotli, this provides the base-2 logarithm of the maximum input block size. If zero is provided, value will be determined based on the quality. Ranges from 16 to 24. | `0` |\n| `COMPRESS_DEFLATE_LEVEL` | Specifies the deflate compression level. | `-1` |\n| `COMPRESS_MIN_SIZE` | Specifies the minimum file size threshold for compressing files. | `500` |\n| `COMPRESS_CACHE_KEY` | Specifies the cache key method for lookup/storage of response data. | `None` |\n| `COMPRESS_CACHE_BACKEND` | Specified the backend for storing the cached response data. | `None` |\n| `COMPRESS_REGISTER` | Specifies if compression should be automatically registered. | `True` |\n| `COMPRESS_ALGORITHM` | Supported compression algorithms. | `[\'br\', \'gzip\', \'deflate\']` |\n| `COMPRESS_STREAMS` | Compress content streams. | `True` |\n'` According to the spec (see the link below), however, setuptools CANNOT consider this value unless 'readme' is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list 'readme' under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. !! warnings.warn(msg, _WouldIgnoreField) /usr/lib/python3.11/site-packages/setuptools/config/_apply_pyprojecttoml.py:103: _WouldIgnoreField: 'license' defined outside of `pyproject.toml` would be ignored. !! ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `license = 'MIT'` According to the spec (see the link below), however, setuptools CANNOT consider this value unless 'license' is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list 'license' under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. !! warnings.warn(msg, _WouldIgnoreField) /usr/lib/python3.11/site-packages/setuptools/config/_apply_pyprojecttoml.py:103: _WouldIgnoreField: 'authors' defined outside of `pyproject.toml` would be ignored. !! ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `authors = 'Thomas Mansencal'` According to the spec (see the link below), however, setuptools CANNOT consider this value unless 'authors' is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list 'authors' under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. !! warnings.warn(msg, _WouldIgnoreField) /usr/lib/python3.11/site-packages/setuptools/config/_apply_pyprojecttoml.py:103: _WouldIgnoreField: 'classifiers' defined outside of `pyproject.toml` would be ignored. !! ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `classifiers = ['Environment :: Web Environment', 'Intended Audience :: Developers', 'License :: OSI Approved :: MIT License', 'Operating System :: OS Independent', 'Programming Language :: Python :: 2', 'Programming Language :: Python :: 2.6', 'Programming Language :: Python :: 2.7', 'Programming Language :: Python :: 3', 'Programming Language :: Python :: 3.6', 'Programming Language :: Python :: 3.7', 'Programming Language :: Python :: 3.8', 'Programming Language :: Python :: 3.9', 'Topic :: Internet :: WWW/HTTP :: Dynamic Content', 'Topic :: Software Development :: Libraries :: Python Modules']` According to the spec (see the link below), however, setuptools CANNOT consider this value unless 'classifiers' is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list 'classifiers' under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. !! warnings.warn(msg, _WouldIgnoreField) /usr/lib/python3.11/site-packages/setuptools/config/_apply_pyprojecttoml.py:103: _WouldIgnoreField: 'dependencies' defined outside of `pyproject.toml` would be ignored. !! ########################################################################## # configuration would be ignored/result in error due to `pyproject.toml` # ########################################################################## The following seems to be defined outside of `pyproject.toml`: `dependencies = ['flask', 'brotli']` According to the spec (see the link below), however, setuptools CANNOT consider this value unless 'dependencies' is listed as `dynamic`. https://packaging.python.org/en/latest/specifications/declaring-project-metadata/ For the time being, `setuptools` will still consider the given value (as a **transitional** measure), but please note that future releases of setuptools will follow strictly the standard. To prevent this warning, you can list 'dependencies' under `dynamic` or alternatively remove the `[project]` table from your file and rely entirely on other means of configuration. !! warnings.warn(msg, _WouldIgnoreField) running bdist_wheel running build running build_py creating build creating build/lib creating build/lib/flask_compress copying flask_compress/flask_compress.py -> build/lib/flask_compress copying flask_compress/__init__.py -> build/lib/flask_compress running egg_info writing flask_compress.egg-info/PKG-INFO writing dependency_links to flask_compress.egg-info/dependency_links.txt writing requirements to flask_compress.egg-info/requires.txt writing top-level names to flask_compress.egg-info/top_level.txt reading manifest file 'flask_compress.egg-info/SOURCES.txt' adding license file 'LICENSE.txt' writing manifest file 'flask_compress.egg-info/SOURCES.txt' installing to build/bdist.linux-x86_64/wheel running install running install_lib creating build/bdist.linux-x86_64 creating build/bdist.linux-x86_64/wheel creating build/bdist.linux-x86_64/wheel/flask_compress copying build/lib/flask_compress/__init__.py -> build/bdist.linux-x86_64/wheel/flask_compress copying build/lib/flask_compress/flask_compress.py -> build/bdist.linux-x86_64/wheel/flask_compress running install_egg_info Copying flask_compress.egg-info to build/bdist.linux-x86_64/wheel/flask_compress-1.13-py3.11.egg-info running install_scripts adding license file "LICENSE.txt" (matched pattern "LICEN[CS]E*") creating build/bdist.linux-x86_64/wheel/flask_compress-1.13.dist-info/WHEEL creating '/builddir/build/BUILD/flask-compress-1.13/.pyproject-builddir/pip-wheel-ptny56bz/tmp8xiaq939/flask_compress-1.13-py3-none-any.whl' and adding 'build/bdist.linux-x86_64/wheel' to it adding 'flask_compress/__init__.py' adding 'flask_compress/flask_compress.py' adding 'flask_compress-1.13.dist-info/LICENSE.txt' adding 'flask_compress-1.13.dist-info/METADATA' adding 'flask_compress-1.13.dist-info/WHEEL' adding 'flask_compress-1.13.dist-info/top_level.txt' adding 'flask_compress-1.13.dist-info/RECORD' removing build/bdist.linux-x86_64/wheel Building wheel for flask-compress (pyproject.toml): finished with status 'done' Created wheel for flask-compress: filename=flask_compress-1.13-py3-none-any.whl size=7731 sha256=abdba04b9d94fd0b035921e51b3628852e6bcd796122877d871ecb22d1eefadd Stored in directory: /builddir/.cache/pip/wheels/76/34/ff/5cbecd8ec3191734d723f01fea465a2e111eab43d29176d48f Successfully built flask-compress + RPM_EC=0 ++ jobs -p + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.idpfmW + umask 022 + cd /builddir/build/BUILD + '[' /builddir/build/BUILDROOT/python-flask-compress-1.13-2.fc38.x86_64 '!=' / ']' + rm -rf /builddir/build/BUILDROOT/python-flask-compress-1.13-2.fc38.x86_64 ++ dirname /builddir/build/BUILDROOT/python-flask-compress-1.13-2.fc38.x86_64 + mkdir -p /builddir/build/BUILDROOT + mkdir /builddir/build/BUILDROOT/python-flask-compress-1.13-2.fc38.x86_64 + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' + export CFLAGS + CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' + export CXXFLAGS + FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib64/gfortran/modules' + export FFLAGS + FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib64/gfortran/modules' + export FCFLAGS + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib64: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd flask-compress-1.13 ++ ls /builddir/build/BUILD/flask-compress-1.13/pyproject-wheeldir/flask_compress-1.13-py3-none-any.whl ++ sed -E 's/([^-]+)-([^-]+)-.+\.whl/\1==\2/' ++ xargs basename --multiple + specifier=flask_compress==1.13 + TMPDIR=/builddir/build/BUILD/flask-compress-1.13/.pyproject-builddir + /usr/bin/python3 -m pip install --root /builddir/build/BUILDROOT/python-flask-compress-1.13-2.fc38.x86_64 --prefix /usr --no-deps --disable-pip-version-check --progress-bar off --verbose --ignore-installed --no-warn-script-location --no-index --no-cache-dir --find-links /builddir/build/BUILD/flask-compress-1.13/pyproject-wheeldir flask_compress==1.13 Using pip 22.2.2 from /usr/lib/python3.11/site-packages/pip (python 3.11) Looking in links: /builddir/build/BUILD/flask-compress-1.13/pyproject-wheeldir Processing ./pyproject-wheeldir/flask_compress-1.13-py3-none-any.whl Installing collected packages: flask_compress Successfully installed flask_compress-1.13 + '[' -d /builddir/build/BUILDROOT/python-flask-compress-1.13-2.fc38.x86_64/usr/bin ']' + rm -f /builddir/build/BUILD/python-flask-compress-1.13-2.fc38.x86_64-pyproject-ghost-distinfo + site_dirs=() + '[' -d /builddir/build/BUILDROOT/python-flask-compress-1.13-2.fc38.x86_64/usr/lib/python3.11/site-packages ']' + site_dirs+=("/usr/lib/python3.11/site-packages") + '[' /builddir/build/BUILDROOT/python-flask-compress-1.13-2.fc38.x86_64/usr/lib64/python3.11/site-packages '!=' /builddir/build/BUILDROOT/python-flask-compress-1.13-2.fc38.x86_64/usr/lib/python3.11/site-packages ']' + '[' -d /builddir/build/BUILDROOT/python-flask-compress-1.13-2.fc38.x86_64/usr/lib64/python3.11/site-packages ']' + for site_dir in ${site_dirs[@]} + for distinfo in /builddir/build/BUILDROOT/python-flask-compress-1.13-2.fc38.x86_64$site_dir/*.dist-info + echo '%ghost /usr/lib/python3.11/site-packages/flask_compress-1.13.dist-info' + sed -i s/pip/rpm/ /builddir/build/BUILDROOT/python-flask-compress-1.13-2.fc38.x86_64/usr/lib/python3.11/site-packages/flask_compress-1.13.dist-info/INSTALLER + PYTHONPATH=/usr/lib/rpm/redhat + /usr/bin/python3 -B /usr/lib/rpm/redhat/pyproject_preprocess_record.py --buildroot /builddir/build/BUILDROOT/python-flask-compress-1.13-2.fc38.x86_64 --record /builddir/build/BUILDROOT/python-flask-compress-1.13-2.fc38.x86_64/usr/lib/python3.11/site-packages/flask_compress-1.13.dist-info/RECORD --output /builddir/build/BUILD/python-flask-compress-1.13-2.fc38.x86_64-pyproject-record + rm -fv /builddir/build/BUILDROOT/python-flask-compress-1.13-2.fc38.x86_64/usr/lib/python3.11/site-packages/flask_compress-1.13.dist-info/RECORD removed '/builddir/build/BUILDROOT/python-flask-compress-1.13-2.fc38.x86_64/usr/lib/python3.11/site-packages/flask_compress-1.13.dist-info/RECORD' + rm -fv /builddir/build/BUILDROOT/python-flask-compress-1.13-2.fc38.x86_64/usr/lib/python3.11/site-packages/flask_compress-1.13.dist-info/REQUESTED removed '/builddir/build/BUILDROOT/python-flask-compress-1.13-2.fc38.x86_64/usr/lib/python3.11/site-packages/flask_compress-1.13.dist-info/REQUESTED' ++ wc -l /builddir/build/BUILD/python-flask-compress-1.13-2.fc38.x86_64-pyproject-ghost-distinfo ++ cut -f1 '-d ' + lines=1 + '[' 1 -ne 1 ']' + /usr/bin/python3 /usr/lib/rpm/redhat/pyproject_save_files.py --output-files /builddir/build/BUILD/python-flask-compress-1.13-2.fc38.x86_64-pyproject-files --output-modules /builddir/build/BUILD/python-flask-compress-1.13-2.fc38.x86_64-pyproject-modules --buildroot /builddir/build/BUILDROOT/python-flask-compress-1.13-2.fc38.x86_64 --sitelib /usr/lib/python3.11/site-packages --sitearch /usr/lib64/python3.11/site-packages --python-version 3.11 --pyproject-record /builddir/build/BUILD/python-flask-compress-1.13-2.fc38.x86_64-pyproject-record --prefix /usr flask_compress + /usr/bin/find-debuginfo -j2 --strict-build-id -m -i --build-id-seed 1.13-2.fc38 --unique-debug-suffix -1.13-2.fc38.x86_64 --unique-debug-src-base python-flask-compress-1.13-2.fc38.x86_64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000 -S debugsourcefiles.list /builddir/build/BUILD/flask-compress-1.13 find: 'debug': No such file or directory + /usr/lib/rpm/check-buildroot + /usr/lib/rpm/redhat/brp-ldconfig + /usr/lib/rpm/brp-compress + /usr/lib/rpm/redhat/brp-strip-lto /usr/bin/strip + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/check-rpaths + /usr/lib/rpm/redhat/brp-mangle-shebangs + /usr/lib/rpm/brp-remove-la-files + /usr/lib/rpm/redhat/brp-python-bytecompile '' 1 0 Bytecompiling .py files below /builddir/build/BUILDROOT/python-flask-compress-1.13-2.fc38.x86_64/usr/lib/python3.11 using python3.11 + /usr/lib/rpm/redhat/brp-python-hardlink Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.QKGbWm + umask 022 + cd /builddir/build/BUILD + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' + export CFLAGS + CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' + export CXXFLAGS + FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib64/gfortran/modules' + export FFLAGS + FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib64/gfortran/modules' + export FCFLAGS + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib64: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd flask-compress-1.13 + RPM_EC=0 ++ jobs -p + exit 0 Processing files: python3-flask-compress-1.13-2.fc38.noarch Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.xtRTkj + umask 022 + cd /builddir/build/BUILD + cd flask-compress-1.13 + DOCDIR=/builddir/build/BUILDROOT/python-flask-compress-1.13-2.fc38.x86_64/usr/share/doc/python3-flask-compress + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/python-flask-compress-1.13-2.fc38.x86_64/usr/share/doc/python3-flask-compress + cp -pr README.md /builddir/build/BUILDROOT/python-flask-compress-1.13-2.fc38.x86_64/usr/share/doc/python3-flask-compress + RPM_EC=0 ++ jobs -p + exit 0 Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.JmElMp + umask 022 + cd /builddir/build/BUILD + cd flask-compress-1.13 + LICENSEDIR=/builddir/build/BUILDROOT/python-flask-compress-1.13-2.fc38.x86_64/usr/share/licenses/python3-flask-compress + export LC_ALL=C + LC_ALL=C + export LICENSEDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/python-flask-compress-1.13-2.fc38.x86_64/usr/share/licenses/python3-flask-compress + cp -pr LICENSE.txt /builddir/build/BUILDROOT/python-flask-compress-1.13-2.fc38.x86_64/usr/share/licenses/python3-flask-compress + RPM_EC=0 ++ jobs -p + exit 0 Provides: python-flask-compress = 1.13-2.fc38 python3-flask-compress = 1.13-2.fc38 python3.11-flask-compress = 1.13-2.fc38 python3.11dist(flask-compress) = 1.13 python3dist(flask-compress) = 1.13 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: python(abi) = 3.11 python3.11dist(brotli) python3.11dist(flask) Checking for unpackaged file(s): /usr/lib/rpm/check-files /builddir/build/BUILDROOT/python-flask-compress-1.13-2.fc38.x86_64 Wrote: /builddir/build/SRPMS/python-flask-compress-1.13-2.fc38.src.rpm Wrote: /builddir/build/RPMS/python3-flask-compress-1.13-2.fc38.noarch.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.YqiqrN + umask 022 + cd /builddir/build/BUILD + cd flask-compress-1.13 + /usr/bin/rm -rf /builddir/build/BUILDROOT/python-flask-compress-1.13-2.fc38.x86_64 + RPM_EC=0 ++ jobs -p + exit 0 Executing(rmbuild): /bin/sh -e /var/tmp/rpm-tmp.nxgL19 + umask 022 + cd /builddir/build/BUILD + rm -rf flask-compress-1.13 flask-compress-1.13.gemspec + RPM_EC=0 ++ jobs -p + exit 0 Finish: rpmbuild python-flask-compress-1.13-2.fc38.src.rpm Finish: build phase for python-flask-compress-1.13-2.fc38.src.rpm INFO: chroot_scan: 3 files copied to /var/lib/copr-rpmbuild/results/chroot_scan INFO: /var/lib/mock/fedora-rawhide-x86_64-1663925790.119649/root/var/log/dnf.rpm.log /var/lib/mock/fedora-rawhide-x86_64-1663925790.119649/root/var/log/dnf.librepo.log /var/lib/mock/fedora-rawhide-x86_64-1663925790.119649/root/var/log/dnf.log INFO: Done(/var/lib/copr-rpmbuild/results/python-flask-compress-1.13-2.fc38.src.rpm) Config(child) 0 minutes 17 seconds INFO: Results and/or logs in: /var/lib/copr-rpmbuild/results INFO: Cleaning up build root ('cleanup_on_success=True') Start: clean chroot INFO: unmounting tmpfs. Finish: clean chroot Finish: run Running RPMResults tool