%global cross cross %global rpmprefix %{nil} %global build_all 1 %global build_aarch64 %{build_all} %global build_alpha %{build_all} %global build_arc %{build_all} %global build_arm %{build_all} %global build_avr32 %{build_all} %global build_blackfin %{build_all} %global build_c6x %{build_all} %global build_cris %{build_all} %global build_frv %{build_all} %global build_h8300 %{build_all} %global build_hppa %{build_all} %global build_hppa64 %{build_all} %global build_ia64 %{build_all} %global build_loongarch64 %{build_all} %global build_m32r %{build_all} %global build_m68k %{build_all} %global build_metag %{build_all} %global build_microblaze %{build_all} %global build_mips64 %{build_all} %global build_mn10300 %{build_all} %global build_nios2 %{build_all} %global build_openrisc %{build_all} %global build_powerpc64 %{build_all} %global build_powerpc64le %{build_all} %global build_riscv64 %{build_all} %global build_s390x %{build_all} %global build_score %{build_all} %global build_sh %{build_all} %global build_sparc64 %{build_all} %global build_tile %{build_all} %global build_x86_64 %{build_all} %global build_xtensa %{build_all} # 32-bit packages we don't build as we can use the 64-bit package instead %global build_i386 0 %global build_mips 0 %global build_powerpc 0 %global build_s390 0 %global build_sparc 0 %global build_sh4 0 # not available in binutils-2.27 %global build_hexagon 0 %global build_unicore32 0 # Do not create deterministic archives by default (cf: BZ 1195883) %global enable_deterministic_archives 0 # Disable the default generation of compressed debug sections. %define default_compress_debug 0 # Default to read-only-relocations (relro) in shared binaries. %define default_relro 1 # Disable the default generation of GNU Build notes by the assembler. # This has turned out to be problematic for the i686 architecture. # although the exact reason has not been determined. (See BZ 1572485) # It also breaks building EFI binaries on AArch64, as these cannot have # relocations against absolute symbols. %define default_generate_notes 0 Name: %{cross}-binutils Version: 2.40 Release: 3%{?dist} Summary: A GNU collection of cross-compilation binary utilities License: GPL-3.0-or-later AND (GPL-3.0-or-later WITH Bison-exception-2.2) AND (LGPL-2.0-or-later WITH GCC-exception-2.0) AND BSD-3-Clause AND GFDL-1.3-or-later AND GPL-2.0-or-later LGPL-2.1-or-later AND LGPL-2.0-or-later URL: https://sourceware.org/binutils # Note - the Linux Kernel binutils releases are too unstable and contain too # many controversial patches so we stick with the official FSF version # instead. Source: http://ftp.gnu.org/gnu/binutils/binutils-%{version}.tar.xz Source2: binutils-2.19.50.0.1-output-format.sed #---------------------------------------------------------------------------- # Purpose: Use /lib64 and /usr/lib64 instead of /lib and /usr/lib in the # default library search path of 64-bit targets. # Lifetime: Permanent, but it should not be. This is a bug in the libtool # sources used in both binutils and gcc, (specifically the # libtool.m4 file). These are based on a version released in 2009 # (2.2.6?) rather than the latest version. (Definitely fixed in # libtool version 2.4.6). Patch01: binutils-libtool-lib64.patch # Purpose: Appends a RHEL or Fedora release string to the generic binutils # version string. # Lifetime: Permanent. This is a RHEL/Fedora specific patch. Patch02: binutils-version.patch # Purpose: Exports the demangle.h header file (associated with the libiberty # sources) with the binutils-devel rpm. # Lifetime: Permanent. This is a RHEL/Fedora specific patch. Patch03: binutils-export-demangle.h.patch # Purpose: Disables the check in the BFD library's bfd.h header file that # config.h has been included before the bfd.h header. See BZ # #845084 for more details. # Lifetime: Permanent - but it should not be. The bfd.h header defines # various types that are dependent upon configuration options, so # the order of inclusion is important. # FIXME: It would be better if the packages using the bfd.h header were # fixed so that they do include the header files in the correct # order. Patch04: binutils-no-config-h-check.patch # Purpose: Include the filename concerned in readelf error and warning # messages. This helps when readelf is run with multiple # input files or when multiple instances of readelf are # running at the same time. # Lifetime: Permanent. This patch changes the format of readelf's output, # making it better (IMHO) but also potentially breaking tools that # depend upon readelf's current output format. cf/ Patch07. # It also tends to break parts of the binutils own # testsuite. Hence the patch remains local for now. Patch05: binutils-filename-in-readelf-messages.patch # Purpose: Disable an x86/x86_64 optimization that moves functions from the # PLT into the GOTPLT for faster access. This optimization is # problematic for tools that want to intercept PLT entries, such # as ltrace and LD_AUDIT. See BZs 1452111 and 1333481. # Lifetime: Permanent. But it should not be. # FIXME: Replace with a configure time option. Patch06: binutils-revert-PLT-elision.patch # Purpose: Changes readelf so that when it displays extra information about # a symbol, this information is placed at the end of the line. # Lifetime: Permanent. cf/ Patch05. # FIXME: The proper fix would be to update the scripts that are expecting # a fixed output from readelf. But it seems that some of them are # no longer being maintained. Patch07: binutils-readelf-other-sym-info.patch # Purpose: Do not create PLT entries for AARCH64 IFUNC symbols referenced in # debug sections. # Lifetime: Permanent. # FIXME: Find related bug. Decide on permanency. Patch08: binutils-2.27-aarch64-ifunc.patch # Purpose: Stop the binutils from statically linking with libstdc++. # Lifetime: Permanent. Patch09: binutils-do-not-link-with-static-libstdc++.patch # Purpose: Allow OS specific sections in section groups. # Lifetime: Fixed in 2.39 (maybe) Patch10: binutils-special-sections-in-groups.patch # Purpose: Fix linker testsuite failures. # Lifetime: Fixed in 2.39 (maybe) Patch11: binutils-fix-testsuite-failures.patch # Purpose: Stop gold from aborting when input sections with the same name # have different flags. # Lifetime: Fixed in 2.39 (maybe) Patch12: binutils-gold-mismatched-section-flags.patch # Purpose: Change the gold configuration script to only warn about # unsupported targets. This allows the binutils to be built with # BPF support enabled. # Lifetime: Permanent. Patch13: binutils-gold-warn-unsupported.patch # Purpose: Enable the creation of .note.gnu.property sections by the GOLD # linker for x86 binaries. # Lifetime: Permanent. Patch14: binutils-gold-i386-gnu-property-notes.patch # Purpose: Allow the binutils to be configured with any (recent) version of # autoconf. # Lifetime: Fixed in 2.39 (maybe ?) Patch15: binutils-autoconf-version.patch # Purpose: Stop libtool from inserting useless runpaths into binaries. # Lifetime: Who knows. Patch16: binutils-libtool-no-rpath.patch # Purpose: Speed up objcopy's note merging algorithm. # Lifetime: Fixed in 2.41 Patch18: binutils-objcopy-note-merge-speedup.patch # Purpose: Fix testsuite failures due to the patches applied here. # Lifetime: Permanent, but varying with each new rebase. Patch19: binutils-testsuite-fixes.patch # Purpose: Stop the linker from associating allocated reloc sections with # the .symtab section , which prevents it from being stripped. # Lifetime: Fixed in 2.41 Patch20: binutils-reloc-symtab.patch # Purpose: Stop an illegal memory access in the BFD library when loading # a file with corrupt symbol version information. # Lifetime: Fixed in 2.41 Patch21: binutils-CVE-2023-1972.patch # Purpose: Stop an abort when using dwp to process a file with no dwo links. # Lifetime: Fixed in 2.41 (maybe) Patch22: binutils-gold-empty-dwp.patch #---------------------------------------------------------------------------- BuildRequires: texinfo >= 4.0, gettext, flex, bison, zlib-devel # BZ 920545: We need pod2man in order to build the manual pages. BuildRequires: /usr/bin/pod2man # Perl, sed and touch are all used in the %prep section of this spec file. BuildRequires: gcc, gcc-c++, perl-interpreter, sed, coreutils BuildRequires: findutils BuildRequires: autoconf automake BuildRequires: make Provides: bundled(libiberty) %description Binutils is a collection of binary utilities, including ar (for creating, modifying and extracting from archives), as (a family of GNU assemblers), gprof (for displaying call graph profile data), ld (the GNU linker), nm (for listing symbols from object files), objcopy (for copying and translating object files), objdump (for displaying information from object files), ranlib (for generating an index for the contents of an archive), readelf (for displaying detailed information about binary files), size (for listing the section sizes of an object or archive file), strings (for listing printable strings from files), strip (for discarding symbols), and addr2line (for converting addresses to file and line). %package -n %{cross}-binutils-common Summary: Cross-build binary utility documentation and translation files BuildArch: noarch %description -n %{cross}-binutils-common Documentation, manual pages and translation files for cross-build binary image generation, manipulation and query tools. %global do_package() \ %if %2 \ %package -n %{rpmprefix}binutils-%1 \ Summary: Cross-build binary utilities for %1 \ Requires: %{cross}-binutils-common == %{version}-%{release} \ %description -n %{rpmprefix}binutils-%1 \ Cross-build binary image generation, manipulation and query tools. \ %endif %global do_symlink() \ %if %2 \ %package -n %{rpmprefix}binutils-%1 \ Summary: Cross-build binary utilities for %1 \ Requires: binutils-%3 == %{version}-%{release} \ %description -n %{rpmprefix}binutils-%1 \ Cross-build binary image generation, manipulation and query tools. \ %endif %do_package aarch64-linux-gnu %{build_aarch64} %do_package alpha-linux-gnu %{build_alpha} %do_package arc-linux-gnu %{build_arc} %do_package arm-linux-gnu %{build_arm} %do_package avr32-linux-gnu %{build_avr32} %do_package bfin-linux-gnu %{build_blackfin} %do_package c6x-linux-gnu %{build_c6x} %do_package cris-linux-gnu %{build_cris} %do_package frv-linux-gnu %{build_frv} %do_package h8300-linux-gnu %{build_h8300} %do_package hexagon-linux-gnu %{build_hexagon} %do_package hppa-linux-gnu %{build_hppa} %do_package hppa64-linux-gnu %{build_hppa64} %do_package i386-linux-gnu %{build_i386} %do_package ia64-linux-gnu %{build_ia64} %do_package loongarch64-linux-gnu %{build_loongarch64} %do_package m32r-linux-gnu %{build_m32r} %do_package m68k-linux-gnu %{build_m68k} %do_package metag-linux-gnu %{build_metag} %do_package microblaze-linux-gnu %{build_microblaze} %do_package mips-linux-gnu %{build_mips} %do_package mips64-linux-gnu %{build_mips64} %do_package mn10300-linux-gnu %{build_mn10300} %do_package nios2-linux-gnu %{build_nios2} %do_package openrisc-linux-gnu %{build_openrisc} or1k-linux-gnu %do_package powerpc-linux-gnu %{build_powerpc} %do_package powerpc64-linux-gnu %{build_powerpc64} %do_package powerpc64le-linux-gnu %{build_powerpc64le} %do_symlink ppc-linux-gnu %{build_powerpc} powerpc-linux-gnu %do_symlink ppc64-linux-gnu %{build_powerpc64} powerpc64-linux-gnu %do_symlink ppc64le-linux-gnu %{build_powerpc64le} powerpc64le-linux-gnu %do_package riscv64-linux-gnu %{build_riscv64} %do_package s390-linux-gnu %{build_s390} %do_package s390x-linux-gnu %{build_s390x} %do_package score-linux-gnu %{build_score} %do_package sh-linux-gnu %{build_sh} %do_package sh4-linux-gnu %{build_sh4} %do_package sparc-linux-gnu %{build_sparc} %do_package sparc64-linux-gnu %{build_sparc64} %do_package tile-linux-gnu %{build_tile} %do_package unicore32-linux-gnu %{build_unicore32} %do_package x86_64-linux-gnu %{build_x86_64} %do_package xtensa-linux-gnu %{build_xtensa} # Where the binaries aimed at gcc will live (ie. /usr//bin/) %global auxbin_prefix %{_exec_prefix} ############################################################################### # # Preparation # ############################################################################### %prep %global srcdir binutils-%{version} %setup -q -n %{srcdir} -c cd %{srcdir} %patch01 -p1 %patch02 -p1 %patch03 -p1 %patch04 -p1 %patch05 -p1 %patch06 -p1 %patch07 -p1 %patch08 -p1 %patch09 -p1 %patch10 -p1 %patch11 -p1 %patch12 -p1 %patch13 -p1 %patch14 -p1 %patch15 -p1 %patch16 -p1 %patch18 -p1 %patch19 -p1 %patch20 -p1 %patch21 -p1 %patch22 -p1 # We cannot run autotools as there is an exact requirement of autoconf-2.59. # On ppc64 and aarch64, we might use 64KiB pages sed -i -e '/#define.*ELF_COMMONPAGESIZE/s/0x1000$/0x10000/' bfd/elf*ppc.c sed -i -e '/#define.*ELF_COMMONPAGESIZE/s/0x1000$/0x10000/' bfd/elf*aarch64.c sed -i -e '/common_pagesize/s/4 /64 /' gold/powerpc.cc sed -i -e '/pagesize/s/0x1000,/0x10000,/' gold/aarch64.cc # LTP sucks perl -pi -e 's/i\[3-7\]86/i[34567]86/g' */conf* sed -i -e 's/%''{release}/%{release}/g' bfd/Makefile{.am,.in} sed -i -e '/^libopcodes_la_\(DEPENDENCIES\|LIBADD\)/s,$, ../bfd/libbfd.la,' opcodes/Makefile.{am,in} # Build libbfd.so and libopcodes.so with -Bsymbolic-functions if possible. if gcc %{optflags} -v --help 2>&1 | grep -q -- -Bsymbolic-functions; then sed -i -e 's/^libbfd_la_LDFLAGS = /&-Wl,-Bsymbolic-functions /' bfd/Makefile.{am,in} sed -i -e 's/^libopcodes_la_LDFLAGS = /&-Wl,-Bsymbolic-functions /' opcodes/Makefile.{am,in} fi # $PACKAGE is used for the gettext catalog name. sed -i -e 's/^ PACKAGE=/ PACKAGE=%{cross}-/' */configure # Undo the name change to run the testsuite. for tool in binutils gas ld do sed -i -e "2aDEJATOOL = $tool" $tool/Makefile.am sed -i -e "s/^DEJATOOL = .*/DEJATOOL = $tool/" $tool/Makefile.in done touch */configure function prep_target () { target=$1 cond=$2 if [ $cond != 0 ] then echo $1 >&5 fi } cd .. ( prep_target aarch64-linux-gnu %{build_aarch64} prep_target alpha-linux-gnu %{build_alpha} prep_target arc-linux-gnu %{build_arc} prep_target arm-linux-gnu %{build_arm} prep_target avr32-linux-gnu %{build_avr32} prep_target bfin-linux-gnu %{build_blackfin} prep_target c6x-linux-gnu %{build_c6x} prep_target cris-linux-gnu %{build_cris} prep_target frv-linux-gnu %{build_frv} prep_target h8300-linux-gnu %{build_h8300} prep_target hexagon-linux-gnu %{build_hexagon} prep_target hppa-linux-gnu %{build_hppa} prep_target hppa64-linux-gnu %{build_hppa64} prep_target i386-linux-gnu %{build_i386} prep_target ia64-linux-gnu %{build_ia64} prep_target loongarch64-linux-gnu %{build_loongarch64} prep_target m32r-linux-gnu %{build_m32r} prep_target m68k-linux-gnu %{build_m68k} prep_target metag-linux-gnu %{build_metag} prep_target microblaze-linux-gnu %{build_microblaze} prep_target mips-linux-gnu %{build_mips} prep_target mips64-linux-gnu %{build_mips64} prep_target mn10300-linux-gnu %{build_mn10300} prep_target nios2-linux-gnu %{build_nios2} prep_target openrisc-linux-gnu %{build_openrisc} prep_target powerpc-linux-gnu %{build_powerpc} prep_target powerpc64-linux-gnu %{build_powerpc64} prep_target powerpc64le-linux-gnu %{build_powerpc64le} prep_target riscv64-linux-gnu %{build_riscv64} prep_target s390-linux-gnu %{build_s390} prep_target s390x-linux-gnu %{build_s390x} prep_target score-linux-gnu %{build_score} prep_target sh-linux-gnu %{build_sh} prep_target sh4-linux-gnu %{build_sh4} prep_target sparc-linux-gnu %{build_sparc} prep_target sparc64-linux-gnu %{build_sparc64} prep_target tile-linux-gnu %{build_tile} prep_target unicore32-linux-gnu %{build_unicore32} prep_target x86_64-linux-gnu %{build_x86_64} prep_target xtensa-linux-gnu %{build_xtensa} ) 5>target.list n=0 for target in `cat target.list` do n=1 break done if [ $n = 0 ] then echo "No targets selected" >&2 exit 8 fi ############################################################################### # # Build # ############################################################################### %build function config_target () { arch=$1 prefix=$arch- build_dir=${1%%%%-*} case $arch in aarch64-*) target=aarch64-linux-gnu;; arc-*) target=arc-linux-gnu;; arm-*) target=arm-linux-gnueabi;; avr32-*) target=avr-linux;; bfin-*) target=bfin-uclinux;; c6x-*) target=c6x-uclinux;; h8300-*) target=h8300-elf;; m32r-*) target=m32r-elf;; mn10300-*) target=am33_2.0-linux;; m68knommu-*) target=m68k-linux;; openrisc-*) target=or1k-linux-gnu;; parisc-*) target=hppa-linux;; score-*) target=score-elf;; tile-*) target=tilegx-linux;; v850-*) target=v850e-linux;; x86-*) target=x86_64-linux;; *) target=$arch;; esac echo $arch: target is $target export CFLAGS="$RPM_OPT_FLAGS -Wno-unused-const-variable" CARGS= case $target in i?86*|sparc*|ppc*|s390*|sh*|arm*|aarch64*|riscv*) CARGS="$CARGS --enable-64-bit-bfd" ;; esac case $target in ia64*) CARGS="$CARGS --enable-targets=i386-linux" ;; esac case $target in ppc*|ppc64*) CARGS="$CARGS --enable-targets=spu" ;; esac case $target in ppc64-*) CARGS="$CARGS --enable-targets=powerpc64le-linux" ;; esac case $target in sh-*) CARGS="$CARGS --enable-targets=sh-linux,sh4-linux" # sh-elf is dropped for now as it makes for ambiguity in format recognition ;; esac case $target in x86_64*|i?86*|arm*|aarch64*|riscv*) CARGS="$CARGS --enable-targets=x86_64-pep" ;; esac %if %{default_relro} CARGS="$CARGS --enable-relro=yes" %else CARGS="$CARGS --enable-relro=no" %endif mkdir $build_dir cd $build_dir # We could optimize the cross builds size by --enable-shared but the produced # binaries may be less convenient in the embedded environment. echo LDFLAGS: $RPM_LD_FLAGS LDFLAGS="$RPM_LD_FLAGS " \ ../%{srcdir}/configure \ --disable-dependency-tracking \ --disable-silent-rules \ --enable-checking \ --prefix=%{_prefix} \ --exec-prefix=%{auxbin_prefix} \ --bindir=%{_bindir} \ --sbindir=%{_sbindir} \ --sysconfdir=%{_sysconfdir} \ --datadir=%{_datadir} \ --includedir=%{_includedir} \ --libdir=%{_libdir} \ --libexecdir=%{_libexecdir} \ --localstatedir=%{_localstatedir} \ --sharedstatedir=%{_sharedstatedir} \ --mandir=%{_mandir} \ --infodir=%{_infodir} \ --build=%{_target_platform} \ --host=%{_target_platform} \ --target=$target \ --program-prefix=$prefix \ --disable-shared \ --disable-install_libbfd \ --with-sysroot=%{_prefix}/$arch/sys-root \ %if %{enable_deterministic_archives} --enable-deterministic-archives \ %else --enable-deterministic-archives=no \ %endif %if %{default_compress_debug} --enable-compressed-debug-sections=all \ %else --enable-compressed-debug-sections=none \ %endif %if %{default_generate_notes} --enable-generate-build-notes=yes \ %else --enable-generate-build-notes=no \ %endif --enable-lto \ $CARGS \ --enable-plugins \ --with-bugurl=http://bugzilla.redhat.com/bugzilla/ cd .. } for target in `cat target.list` do config_target $target done function build_target () { build_dir=${1%%%%-*} %make_build -C $build_dir tooldir=%{_prefix} all } for target in `cat target.list` do build_target $target done # for documentation purposes only mkdir %{cross}-binutils cd %{cross}-binutils ../%{srcdir}/configure \ --disable-dependency-tracking \ --disable-silent-rules \ --prefix=%{_prefix} \ --exec-prefix=%{auxbin_prefix} \ --bindir=%{_bindir} \ --sbindir=%{_sbindir} \ --sysconfdir=%{_sysconfdir} \ --datadir=%{_datadir} \ --includedir=%{_includedir} \ --libdir=%{_libdir} \ --libexecdir=%{_libexecdir} \ --localstatedir=%{_localstatedir} \ --sharedstatedir=%{_sharedstatedir} \ --mandir=%{_mandir} \ --infodir=%{_infodir} \ --program-prefix=%{cross}- \ --disable-shared \ --with-bugurl=http://bugzilla.redhat.com/bugzilla/ %make_build tooldir=%{_prefix} all cd .. ############################################################################### # # Installation # ############################################################################### %install function install_bin () { cpu=${1%%%%-*} build_dir=$cpu %make_install -C $build_dir DESTDIR=%{buildroot} # We want links for ppc and ppc64 also if we make powerpc or powerpc64 case $cpu in powerpc*) cd %{buildroot}/usr/bin for i in $cpu-* do ln -s $i ppc${i#powerpc} done cd - cd %{buildroot}/usr/ for i in $cpu-* do ln -s $i ppc${i#powerpc} done cd - cd %{buildroot}/usr/share/man/man1 for i in $cpu-* do ln -s $i ppc${i#powerpc} done cd - ;; esac } for target in `cat target.list` do echo "=== INSTALL target $target ===" mkdir -p %{buildroot}%{_prefix}/$target/sys-root install_bin $target done echo "=== INSTALL man targets ===" make install-man1 -C %{cross}-binutils/binutils DESTDIR=%{buildroot} make install-man1 -C %{cross}-binutils/gas DESTDIR=%{buildroot} make install-man1 -C %{cross}-binutils/ld DESTDIR=%{buildroot} make install-man1 -C %{cross}-binutils/gprof DESTDIR=%{buildroot} echo "=== INSTALL po targets ===" %make_install -C %{cross}-binutils/binutils/po DESTDIR=%{buildroot} %make_install -C %{cross}-binutils/gas/po DESTDIR=%{buildroot} %make_install -C %{cross}-binutils/ld/po DESTDIR=%{buildroot} %make_install -C %{cross}-binutils/gprof/po DESTDIR=%{buildroot} %make_install -C %{cross}-binutils/bfd/po DESTDIR=%{buildroot} %make_install -C %{cross}-binutils/opcodes/po DESTDIR=%{buildroot} # Add the additional symlink-only targets grep ^powerpc target.list | sed -e s/powerpc/ppc/ >symlink-target.list cat symlink-target.list >>target.list # For cross-binutils we drop the documentation. echo "=== REMOVE documentation ===" rm -rf %{buildroot}%{_infodir} rm -f %{buildroot}%{_infodir}/dir echo "=== REMOVE libraries and scripts ===" find %{buildroot} -type f -name "*.a" -delete rm -rf %{buildroot}%{auxbin_prefix}/*/lib/ldscripts rmdir %{buildroot}%{auxbin_prefix}/*/lib || : echo "=== REMOVE include and dev files ===" if [ -d %{buildroot}/usr/include ]; then find %{buildroot}/usr/include -type f -name "*.h" -delete fi rm -rf %{buildroot}/etc/gprofng.rc echo "=== BUILD file lists ===" function build_file_list () { arch=$1 cpu=${arch%%%%-*} case $cpu in avr32) target_cpu=avr;; bfin) target_cpu=bfin;; h8300) target_cpu=h8300;; mn10300) target_cpu=am33_2.0;; openrisc) target_cpu=or1k;; score) target_cpu=score;; tile) target_cpu=tilegx;; v850) target_cpu=v850e;; *) target_cpu=$cpu;; esac ( echo %{_bindir}/$arch-[!l]\* echo %{_bindir}/$arch-ld\* echo %{_mandir}/man1/$arch-\* echo %{auxbin_prefix}/$target_cpu-\* ) >files.$arch } for target in `cat target.list` do build_file_list $target done # All the installed manual pages and translation files for each program are the # same, so symlink them to the core package echo "=== CROSSLINK man pages ===" cd %{buildroot}%{_mandir}/man1 for i in %{cross}-*.1* do j=${i#%{cross}-} for k in *-$j do if [ $k != $i ] then ln -sf $i $k fi done done # Add ld.bfd manual pages find * -name "*ld.1*" -a ! -name "%{cross}-ld.1*" -print | while read x do y=`echo $x | sed -e s/ld[.]1/ld.bfd.1/` ln -s $x $y done cd - # Find the language files which only exist in the common package ( %find_lang %{cross}-binutils %find_lang %{cross}-opcodes %find_lang %{cross}-bfd %find_lang %{cross}-gas %find_lang %{cross}-ld %find_lang %{cross}-gprof cat %{cross}-binutils.lang cat %{cross}-opcodes.lang cat %{cross}-bfd.lang cat %{cross}-gas.lang cat %{cross}-ld.lang cat %{cross}-gprof.lang ) >files.cross ############################################################################### # # Cleanup # ############################################################################### ############################################################################### # # Filesets # ############################################################################### %files -n %{cross}-binutils-common -f files.cross %license %{srcdir}/COPYING* %doc %{srcdir}/README %{_mandir}/man1/%{cross}-* %global do_files() \ %if %2 \ %files -n %{rpmprefix}binutils-%1 -f files.%1 \ %endif %do_files aarch64-linux-gnu %{build_aarch64} %do_files alpha-linux-gnu %{build_alpha} %do_files arc-linux-gnu %{build_arc} %do_files arm-linux-gnu %{build_arm} %do_files avr32-linux-gnu %{build_avr32} %do_files bfin-linux-gnu %{build_blackfin} %do_files c6x-linux-gnu %{build_c6x} %do_files cris-linux-gnu %{build_cris} %do_files frv-linux-gnu %{build_frv} %do_files h8300-linux-gnu %{build_h8300} %do_files hexagon-linux-gnu %{build_hexagon} %do_files hppa-linux-gnu %{build_hppa} %do_files hppa64-linux-gnu %{build_hppa64} %do_files i386-linux-gnu %{build_i386} %do_files ia64-linux-gnu %{build_ia64} %do_files loongarch64-linux-gnu %{build_loongarch64} %do_files m32r-linux-gnu %{build_m32r} %do_files m68k-linux-gnu %{build_m68k} %do_files metag-linux-gnu %{build_metag} %do_files microblaze-linux-gnu %{build_microblaze} %do_files mips-linux-gnu %{build_mips} %do_files mips64-linux-gnu %{build_mips64} %do_files mn10300-linux-gnu %{build_mn10300} %do_files nios2-linux-gnu %{build_nios2} %do_files openrisc-linux-gnu %{build_openrisc} %do_files powerpc-linux-gnu %{build_powerpc} %do_files powerpc64-linux-gnu %{build_powerpc64} %do_files powerpc64le-linux-gnu %{build_powerpc64le} %do_files ppc-linux-gnu %{build_powerpc} %do_files ppc64-linux-gnu %{build_powerpc64} %do_files ppc64le-linux-gnu %{build_powerpc64le} %do_files riscv64-linux-gnu %{build_riscv64} %do_files s390-linux-gnu %{build_s390} %do_files s390x-linux-gnu %{build_s390x} %do_files score-linux-gnu %{build_score} %do_files sh-linux-gnu %{build_sh} %do_files sh4-linux-gnu %{build_sh4} %do_files sparc-linux-gnu %{build_sparc} %do_files sparc64-linux-gnu %{build_sparc64} %do_files tile-linux-gnu %{build_tile} %do_files unicore32-linux-gnu %{build_unicore32} %do_files x86_64-linux-gnu %{build_x86_64} %do_files xtensa-linux-gnu %{build_xtensa} %changelog * Sun Jul 30 2023 Peter Robinson - 2.40-3 - Spec File: migrated to SPDX license. * Wed Jul 19 2023 Fedora Release Engineering - 2.40-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_39_Mass_Rebuild * Thu Jun 08 2023 Peter Robinson - 2.40-1 - Update to binutils-2.40-9 * Thu Jan 19 2023 Michael Brown - 2.39-3 - Enable support for LoongArch64 * Thu Jan 19 2023 Fedora Release Engineering - 2.39-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_38_Mass_Rebuild * Fri Dec 30 2022 Peter Robinson - 2.39-1 - sync to binutils-2.39-7.fc38 * Wed Jul 20 2022 Fedora Release Engineering - 2.38-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild * Sat May 07 2022 Peter Robinson - 2.38-3 - Resync to binutils-2.38-8.fc37 * Tue Mar 22 2022 Peter Robinson - 2.38-2 - Resync to binutils-2.38-6.fc37 * Mon Feb 28 2022 Peter Robinson - 2.38-1 - Rebase on GNU Binutils 2.38. - Add support for specifying a section type in linker scripts. (#2052801) * Thu Jan 20 2022 Fedora Release Engineering - 2.37-5 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Sun Dec 05 2021 Peter Robinson - 2.37-4 - Sync to binutils-2.37-22 * Thu Oct 28 2021 Peter Jones - 2.37-3 - Add support for pei-aarch64-little objects on aarch64 * Mon Aug 23 2021 Peter Robinson - 2.37-2 - Update to binutils-2.37-9 * Sat Jul 24 2021 Peter Robinson - 2.37-1 - Update to 2.37 * Wed Jul 21 2021 Fedora Release Engineering - 2.35.1-6 - Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild * Tue Jan 26 2021 Fedora Release Engineering - 2.35.1-5 - Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild * Thu Dec 3 2020 Peter Robinson - 2.35.1-4 - Sync to binutils-2.35.1-16 * Sun Nov 8 2020 Peter Robinson - 2.35.1-3 - Sync to binutils 2.35.1-13 * Sat Oct 10 2020 Peter Robinson - 2.35.1-2 - Sync to binutils 2.35.1-5 * Wed Sep 23 2020 Peter Robinson - 2.35.1-1 - Sync to 2.35.1 * Fri Sep 04 2020 Peter Robinson - 2.35-4 - Sync to binutils-2.35-12 * Sat Aug 01 2020 Fedora Release Engineering - 2.35-3 - Second attempt - Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild * Mon Jul 27 2020 Fedora Release Engineering - 2.35-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild * Sun Jul 26 2020 Peter Robinson - 2.35-1 - Update to 2.35 * Mon Jul 20 2020 Jeff Law - 2.34-3 - Fix configure tests compromised by LTO - Work around diagnostics exposed by LTO * Thu Feb 27 2020 Peter Robinson - 2.34-2 - Fix the plugin support architecture to allow proper symbol info handling. (PR 25355) * Mon Feb 3 2020 Peter Robinson 2.34-1 - sync with binutils 2.34-1 - Enable 64-bit BFD and PEP support for riscv. - Improve the accuracy of addr2line. * Tue Jan 28 2020 Fedora Release Engineering - 2.33.1-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild * Mon Jan 06 2020 Peter Robinson - 2.33.1-2 - sync with binutils 2.33.1-11 * Tue Oct 15 2019 Peter Robinson 2.33.1-1 - Sync with binutils-2.33.1-1 * Tue Aug 27 2019 Peter Robinson 2.32-3 - Sync with binutils-2.32-24 * Wed Jul 24 2019 Fedora Release Engineering - 2.32-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild * Sun May 26 2019 Peter Robinson 2.32-1 - Sync with binutils-2.32-14 * Sun May 26 2019 Peter Robinson 2.31.1-3 - Sync with binutils-2.31.1-31 * Thu Jan 31 2019 Fedora Release Engineering - 2.31.1-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild * Tue Nov 6 2018 Tom Callaway - 2.31.1-1 - update to 2.31.1 * Thu Jul 12 2018 Fedora Release Engineering - 2.30-6 - Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild * Wed Jul 11 2018 David Howells - 2.30-5 - Switch ARC to arc-linux-gnu (#1600183). * Tue Jul 10 2018 David Howells - 2.30-4 - Sync with binutils-2.30-26. - Add support for the ARC arch (#1599744). * Thu Jun 28 2018 David Howells - 2.30-3 - Fix ppc* symlink packages inclusion of files from the powerpc* packages. - Sync with binutils-2.30-24. * Tue May 29 2018 David Howells - 2.30-2 - Sync with binutils-2.30-21. * Fri Mar 30 2018 David Howells - 2.30-1 - Sync with binutils-2.30-14. * Wed Feb 14 2018 David Howells - 2.29.1-4 - Sync with binutils-2.29.1-19. * Fri Feb 09 2018 Igor Gnatenko - 2.29.1-3 - Escape macros in %%changelog * Wed Feb 07 2018 Fedora Release Engineering - 2.29.1-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild * Mon Nov 6 2017 David Howells - 2.29.1-1 - Sync with binutils-2.29.1-4. - Add support for riscv64 arch (#1491955). * Wed Aug 02 2017 Fedora Release Engineering - 2.29-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild * Wed Jul 26 2017 Fedora Release Engineering - 2.29-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild * Tue Jul 25 2017 David Howells - 2.29-1 - Sync with binutils-2.29-1. * Mon Jun 26 2017 David Howells - 2.28-3 - Sync with binutils-2.28-9. * Tue May 16 2017 David Howells - 2.28-2 - Sync with binutils-2.28-6. * Wed Mar 15 2017 David Howells - 2.28-1 - Sync with binutils-2.28-4. * Mon Feb 6 2017 David Howells - 2.27-6 - Sync with binutils-2.27-16. - Install COPYING[*] files using the %%license macro. * Wed Dec 14 2016 Merlin Mathesius - 2.27-5 - Import upstream xtensa bug fix causing cross-gcc FTBFS (BZ#1404857). * Fri Dec 9 2016 David Howells - 2.27-4 - Sync with binutils-2.27-12. * Thu Sep 15 2016 David Howells - 2.27-3 - Added version to obsoletion of sh64. - Fix changelog date. * Wed Sep 14 2016 David Howells - 2.27-1 - Sync with binutils-2.27-4. - Obsolete sh64. * Mon Jul 4 2016 David Howells - 2.26.1-1 - Sync with binutils-2.26.1-1. * Tue May 10 2016 David Howells - 2.26-8 - Sync with binutils-2.26-21. - arm: Fix uninitialised variable in arm build (#1333695). * Wed May 4 2016 David Howells - 2.26-7 - Sync with binutils-2.26-20. * Fri Feb 19 2016 David Howells - 2.26-6 - Sync with binutils-2.26-12. * Thu Feb 11 2016 David Howells - 2.26-5 - Sync with binutils-2.26-10. - c6x: Handle inconsistent .cfi_sections directives [binutils bz 19614]. * Mon Feb 8 2016 David Howells - 2.26-4 - SH: Drop sh-elf support to avoid ambiguity errors in target selection (#1296814). * Fri Feb 5 2016 David Howells - 2.26-3 - Sync with binutils-2.26-8. - Microblaze: Fix binutils compilation on 32-bit arch. * Tue Jan 26 2016 David Howells - 2.26-1 - Sync with binutils-2.26-2. * Mon Aug 24 2015 David Howells - 2.25.1-1 - Sync with binutils-2.25.1-4. - Set --enable-targets if the target is powerpc* not just ppc*. - Provide LE ppc and ppc64 emulations [BZ 1255947]. * Mon Apr 6 2015 David Howells - 2.25-4 - Microblaze: Fix extra-large constant handling [binutils bz 18189]. * Wed Jan 7 2015 David Howells - 2.25-3 - Fix up the target for SH64 and cease mixing 32-bit SH targets with SH64. - SH64: Work around flags not getting set on incremental link of .a into .o [binutils bz 17288]. * Mon Jan 5 2015 David Howells - 2.25-1 - Sync with binutils-2.25 to pick up fixes. Resolves: BZ #1162577, #1162601, #1162611, #1162625 * Thu Nov 13 2014 David Howells - 2.24-7 - Fix problems with the ar program reported in FSF PR 17533. Resolves: BZ #1162672, #1162659 * Wed Nov 12 2014 David Howells - 2.24-6 - Sync with binutils to pick up fixes. - Backport binutils 2.4 upstream branch to pick up more fixes. * Sat Aug 16 2014 Fedora Release Engineering - 2.24-6 - Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild * Fri Jul 18 2014 David Howells - 2.24-5 - Add NIOS2 arch support. * Mon Jun 16 2014 David Howells - 2.24-4 - Fix gcc-4.9 new compile error in m68k handler in gas. * Wed Jun 11 2014 David Howells - 2.24-4 - Sync with binutils-2.24-15 fixing the bfd_set_section_alignment() error [BZ 1106093] - Apply the changes on binutils-2_24-branch in git to cab6c3ee9785f072a373afe31253df0451db93cf. * Fri Mar 28 2014 David Howells - 2.24-2 - A sysroot of / is bad, so make it /usr//sys-root/. * Thu Mar 27 2014 David Howells - 2.24-1 - Fix formatless sprintfs in Score. * Wed Mar 26 2014 David Howells - 2.24-1 - Update to binutils-2.24-1. - Add metag arch support. * Fri Aug 9 2013 David Howells - 2.23.88.0.1-2 - Fix a build error in xtensa * Thu Aug 8 2013 David Howells - 2.23.88.0.1-2 - Backport S390 .machinemode pseudo-op support from binutils-2.23.88.0.1-10. - Add pod2man as a build requirement. * Tue Jun 4 2013 David Howells - 2.23.88.0.1-1 - Update to binutils-2.22.88.0.1 to fix F19 texinfo issues [BZ 912921]. * Tue Jun 4 2013 David Howells - 2.23.51.0.3-2 - Backport cleanups from the RHEL-6.4 cross-compiler. - Backport some macroisation from the RHEL-6.4 cross-compiler. - The hppa64 target cannot actually build hppa, so provide hppa [BZ 892220]. * Wed Feb 13 2013 Fedora Release Engineering - 2.23.51.0.3-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild * Fri Nov 2 2012 David Howells - 2.23.51.0.3-1 - Update to binutils-2.23.51.0.3. - Added support for aarch64. * Mon Oct 15 2012 Jon Ciesla - 2.22.52.0.3-4 - Provides: bundled(libiberty) * Wed Jul 18 2012 Fedora Release Engineering - 2.22.52.0.3-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild * Wed Jul 11 2012 Dan Horák - 2.22.52.0.3-2 - don't install libbfd/libopcode when host == target (eg. on s390x) * Wed May 30 2012 David Howells - 2.22.52.0.3-1 - Update to binutils-2.22.52.0.3. - Fixed a warning in the assembler for h8300 that caused the build to fail. * Thu Mar 22 2012 David Howells - 2.22.52.0.1-8.1 - Initial import of cross-binutils [BZ 761619]. * Wed Mar 07 2012 Jakub Jelinek - 2.22.52.0.1-8 - Fix up handling of hidden ifunc relocs on x86_64 - Add Intel TSX support