# Provide a way to skip tests via rpmbuild `--without` # This makes it easier to skip tests in copr repos, where # the qemu test suite is historically flakey %bcond_without check %global libfdt_version 1.6.0 %global libseccomp_version 2.4.0 %global libusbx_version 1.0.23 %global meson_version 0.58.2 %global usbredir_version 0.7.1 %global ipxe_version 20200823-5.git4bd064de %global have_memlock_limits 0 %global need_qemu_kvm 0 %ifarch %{ix86} %global kvm_package system-x86 # need_qemu_kvm should only ever be used by x86 %global need_qemu_kvm 1 %endif %ifarch x86_64 %global kvm_package system-x86 # need_qemu_kvm should only ever be used by x86 %global need_qemu_kvm 1 %endif %ifarch %{power64} %global have_memlock_limits 1 %global kvm_package system-ppc %endif %ifarch s390x %global kvm_package system-s390x %endif %ifarch armv7hl %global kvm_package system-arm %endif %ifarch aarch64 %global kvm_package system-aarch64 %endif %ifarch %{mips} %global kvm_package system-mips %endif %ifarch riscv64 %global kvm_package system-riscv %endif %global modprobe_kvm_conf %{_sourcedir}/kvm.conf %ifarch s390x %global modprobe_kvm_conf %{_sourcedir}/kvm-s390x.conf %endif %ifarch %{ix86} x86_64 %global modprobe_kvm_conf %{_sourcedir}/kvm-x86.conf %endif %global tools_only 0 %global user_static 1 %global have_kvm 0 %if 0%{?kvm_package:1} %global have_kvm 1 %endif # Matches numactl ExcludeArch %global have_numactl 1 %ifarch %{arm} %global have_numactl 0 %endif # Matches spice ExclusiveArch %global have_spice 0 %ifarch %{ix86} x86_64 %{arm} aarch64 %global have_spice 1 %endif # Matches xen ExclusiveArch %global have_xen 0 %if 0%{?fedora} %ifarch %{ix86} x86_64 armv7hl aarch64 %global have_xen 1 %endif %endif %global have_liburing 0 %if 0%{?fedora} %ifnarch %{arm} %global have_liburing 1 %endif %endif %global have_virgl 0 %if 0%{?fedora} %global have_virgl 1 %endif %global have_pmem 0 %ifarch x86_64 %{power64} %global have_pmem 1 %endif %global have_jack 1 %if 0%{?rhel} %global have_jack 0 %endif %global have_sdl_image %{defined fedora} %global have_fdt 1 %global have_opengl 1 %global have_usbredir 1 %global enable_werror 0 # Matches edk2.spec ExclusiveArch %global have_edk2 0 %ifarch %{ix86} x86_64 %{arm} aarch64 %global have_edk2 1 %endif # All modules should be listed here. %define have_block_rbd 1 %ifarch %{ix86} %{arm} %define have_block_rbd 0 %endif %global have_block_gluster 1 %define have_block_nfs 0 %if 0%{?fedora} %define have_block_nfs 1 %endif %define have_capstone_devel 0 %if 0%{?fedora} # capstone-devel is only on Fedora. Use it if it's available, but # if not, use the internal qemu submodule copy %define have_capstone_devel 1 %endif %define have_librdma 1 %ifarch %{arm} %define have_librdma 0 %endif # LTO still has issues with qemu on armv7hl and aarch64 # https://bugzilla.redhat.com/show_bug.cgi?id=1952483 %global _lto_cflags %{nil} # OOM killer breaks builds with parallel make on s390(x) %ifarch s390x %global _smp_mflags %{nil} %endif %global firmwaredirs "%{_datadir}/qemu-firmware:%{_datadir}/ipxe/qemu:%{_datadir}/seavgabios:%{_datadir}/seabios:%{_datadir}/sgabios" %global qemudocdir %{_docdir}/%{name} %define evr %{epoch}:%{version}-%{release} %define requires_block_curl Requires: %{name}-block-curl = %{evr} %define requires_block_dmg Requires: %{name}-block-dmg = %{evr} %if %{have_block_gluster} %define requires_block_gluster Requires: %{name}-block-gluster = %{evr} %define obsoletes_block_gluster %{nil} %else %define requires_block_gluster %{nil} %define obsoletes_block_gluster Obsoletes: %{name}-block-gluster < %{evr} %endif %define requires_block_iscsi Requires: %{name}-block-iscsi = %{evr} %if %{have_block_nfs} %define requires_block_nfs Requires: %{name}-block-nfs = %{evr} %define obsoletes_block_nfs %{nil} %else %define requires_block_nfs %{nil} %define obsoletes_block_nfs Obsoletes: %{name}-block-nfs < %{evr} %endif %if %{have_block_rbd} %define requires_block_rbd Requires: %{name}-block-rbd = %{evr} %define obsoletes_block_rbd %{nil} %else %define requires_block_rbd %{nil} %define obsoletes_block_rbd Obsoletes: %{name}-block-rbd < %{evr} %endif %define requires_block_ssh Requires: %{name}-block-ssh = %{evr} %define requires_audio_alsa Requires: %{name}-audio-alsa = %{evr} %define requires_audio_oss Requires: %{name}-audio-oss = %{evr} %define requires_audio_pa Requires: %{name}-audio-pa = %{evr} %define requires_audio_sdl Requires: %{name}-audio-sdl = %{evr} %define requires_char_baum Requires: %{name}-char-baum = %{evr} %define requires_device_usb_host Requires: %{name}-device-usb-host = %{evr} %define requires_device_usb_redirect Requires: %{name}-device-usb-redirect = %{evr} %define requires_device_usb_smartcard Requires: %{name}-device-usb-smartcard = %{evr} %define requires_ui_curses Requires: %{name}-ui-curses = %{evr} %define requires_ui_gtk Requires: %{name}-ui-gtk = %{evr} %define requires_ui_sdl Requires: %{name}-ui-sdl = %{evr} %define requires_ui_egl_headless Requires: %{name}-ui-egl-headless = %{evr} %define requires_ui_opengl Requires: %{name}-ui-opengl = %{evr} %define requires_device_display_virtio_gpu Requires: %{name}-device-display-virtio-gpu = %{evr} %define requires_device_display_virtio_gpu_gl Requires: %{name}-device-display-virtio-gpu-gl = %{evr} %define requires_device_display_virtio_gpu_pci Requires: %{name}-device-display-virtio-gpu-pci = %{evr} %define requires_device_display_virtio_gpu_pci_gl Requires: %{name}-device-display-virtio-gpu-pci-gl = %{evr} %define requires_device_display_virtio_gpu_ccw Requires: %{name}-device-display-virtio-gpu-ccw = %{evr} %define requires_device_display_virtio_vga Requires: %{name}-device-display-virtio-vga = %{evr} %define requires_device_display_virtio_vga_gl Requires: %{name}-device-display-virtio-vga-gl = %{evr} %if %{have_virgl} %define requires_device_display_vhost_user_gpu Requires: %{name}-device-display-vhost-user-gpu = %{evr} %else %define requires_device_display_vhost_user_gpu %{nil} %endif %if %{have_jack} %define requires_audio_jack Requires: %{name}-audio-jack = %{evr} %else %define requires_audio_jack %{nil} %endif %if %{have_spice} %define requires_ui_spice_app Requires: %{name}-ui-spice-app = %{evr} %define requires_ui_spice_core Requires: %{name}-ui-spice-core = %{evr} %define requires_device_display_qxl Requires: %{name}-device-display-qxl = %{evr} %define requires_audio_spice Requires: %{name}-audio-spice = %{evr} %define requires_char_spice Requires: %{name}-char-spice = %{evr} %else %define requires_ui_spice_app %{nil} %define requires_ui_spice_core %{nil} %define requires_device_display_qxl %{nil} %define requires_audio_spice %{nil} %define requires_char_spice %{nil} %endif %global requires_all_modules \ %{requires_block_curl} \ %{requires_block_dmg} \ %{requires_block_gluster} \ %{requires_block_iscsi} \ %{requires_block_nfs} \ %{requires_block_rbd} \ %{requires_block_ssh} \ %{requires_audio_alsa} \ %{requires_audio_oss} \ %{requires_audio_pa} \ %{requires_audio_sdl} \ %{requires_audio_jack} \ %{requires_audio_spice} \ %{requires_ui_curses} \ %{requires_ui_gtk} \ %{requires_ui_sdl} \ %{requires_ui_egl_headless} \ %{requires_ui_opengl} \ %{requires_ui_spice_app} \ %{requires_ui_spice_core} \ %{requires_char_baum} \ %{requires_char_spice} \ %{requires_device_display_qxl} \ %{requires_device_display_vhost_user_gpu} \ %{requires_device_display_virtio_gpu} \ %{requires_device_display_virtio_gpu_gl} \ %{requires_device_display_virtio_gpu_pci} \ %{requires_device_display_virtio_gpu_pci_gl} \ %{requires_device_display_virtio_vga} \ %{requires_device_display_virtio_vga_gl} \ %{requires_device_usb_host} \ %{requires_device_usb_redirect} \ %{requires_device_usb_smartcard} \ # Modules which can be conditionally built %global obsoletes_some_modules \ %{obsoletes_block_gluster} \ %{obsoletes_block_rbd} \ %{obsoletes_block_rbd} \ Obsoletes: %{name}-system-lm32 <= %{epoch}:%{version}-%{release} \ Obsoletes: %{name}-system-lm32-core <= %{epoch}:%{version}-%{release} \ Obsoletes: %{name}-system-moxie <= %{epoch}:%{version}-%{release} \ Obsoletes: %{name}-system-moxie-core <= %{epoch}:%{version}-%{release} \ Obsoletes: %{name}-system-unicore32 <= %{epoch}:%{version}-%{release} \ Obsoletes: %{name}-system-unicore32-core <= %{epoch}:%{version}-%{release} # Release candidate version tracking %global rcver rc4 %if 0%{?rcver:1} %global rcrel .%{rcver} %global rcstr -%{rcver} %endif Summary: QEMU is a FAST! processor emulator Name: qemu Version: 6.2.0 Release: 0.1%{?rcrel}%{?dist} Epoch: 2 License: GPLv2 and BSD and MIT and CC-BY URL: https://www.qemu.org/ Source0: https://wiki.qemu-project.org/download/%{name}-%{version}%{?rcstr}.tar.xz Source10: qemu-guest-agent.service Source11: 99-qemu-guest-agent.rules Source12: bridge.conf Source17: qemu-ga.sysconfig Source21: 95-kvm-memlock.conf Source26: vhost.conf Source27: kvm.conf Source30: kvm-s390x.conf Source31: kvm-x86.conf Source36: README.tests BuildRequires: meson >= %{meson_version} BuildRequires: zlib-devel BuildRequires: glib2-devel BuildRequires: gnutls-devel BuildRequires: libselinux-devel BuildRequires: cyrus-sasl-devel BuildRequires: libaio-devel BuildRequires: python3-devel BuildRequires: libiscsi-devel BuildRequires: libattr-devel BuildRequires: libusbx-devel >= %{libusbx_version} %if %{have_usbredir} BuildRequires: usbredir-devel >= %{usbredir_version} %endif BuildRequires: texinfo BuildRequires: python3-sphinx BuildRequires: python3-sphinx_rtd_theme BuildRequires: libseccomp-devel >= %{libseccomp_version} # For network block driver BuildRequires: libcurl-devel BuildRequires: libssh-devel %if %{have_block_rbd} BuildRequires: librbd-devel %endif # We need both because the 'stap' binary is probed for by configure BuildRequires: systemtap BuildRequires: systemtap-sdt-devel # For VNC PNG support BuildRequires: libpng-devel # For virtiofs BuildRequires: libcap-ng-devel # Hard requirement for version >= 1.3 BuildRequires: pixman-devel # For rdma %if %{have_librdma} BuildRequires: rdma-core-devel %endif %if %{have_fdt} BuildRequires: libfdt-devel >= %{libfdt_version} %endif # For compressed guest memory dumps BuildRequires: lzo-devel snappy-devel # For NUMA memory binding %if %{have_numactl} BuildRequires: numactl-devel %endif # qemu-pr-helper multipath support (requires libudev too) BuildRequires: device-mapper-multipath-devel BuildRequires: systemd-devel %if %{have_pmem} BuildRequires: libpmem-devel %endif # qemu-keymap BuildRequires: pkgconfig(xkbcommon) %if %{have_opengl} BuildRequires: pkgconfig(epoxy) BuildRequires: pkgconfig(libdrm) BuildRequires: pkgconfig(gbm) %endif BuildRequires: perl-Test-Harness BuildRequires: libslirp-devel BuildRequires: libbpf-devel # Fedora specific %if "%{toolchain}" == "clang" BuildRequires: clang %else BuildRequires: gcc %endif BuildRequires: make # -display sdl support BuildRequires: SDL2-devel # pulseaudio audio output BuildRequires: pulseaudio-libs-devel # alsa audio output BuildRequires: alsa-lib-devel %if %{have_block_nfs} # NFS drive support BuildRequires: libnfs-devel %endif # curses display backend BuildRequires: ncurses-devel %if %{have_spice} # spice graphics support BuildRequires: spice-protocol BuildRequires: spice-server-devel %endif # VNC JPEG support BuildRequires: libjpeg-devel # Braille device support BuildRequires: brlapi-devel %if %{have_block_gluster} # gluster block driver BuildRequires: glusterfs-api-devel %endif # GTK frontend BuildRequires: gtk3-devel BuildRequires: vte291-devel # GTK translations BuildRequires: gettext %if %{have_xen} # Xen support BuildRequires: xen-devel %endif # reading bzip2 compressed dmg images BuildRequires: bzip2-devel # TLS test suite BuildRequires: libtasn1-devel # smartcard device BuildRequires: libcacard-devel %if %{have_virgl} # virgl 3d support BuildRequires: virglrenderer-devel %endif %if %{have_capstone_devel} # preferred disassembler for TCG BuildRequires: capstone-devel %endif # parallels disk images require libxml2 BuildRequires: libxml2-devel # qemu-ga BuildRequires: libudev-devel # qauth infrastructure BuildRequires: pam-devel %if %{have_liburing} # liburing support. Library isn't built for arm BuildRequires: liburing-devel %endif # zstd compression support BuildRequires: libzstd-devel # `hostname` used by test suite BuildRequires: hostname # nvdimm dax BuildRequires: daxctl-devel # fuse block device BuildRequires: fuse-devel %if %{have_jack} # jack audio driver BuildRequires: jack-audio-connection-kit-devel %endif BuildRequires: fuse3-devel %if %{have_sdl_image} BuildRequires: SDL2_image-devel %endif %if %{user_static} BuildRequires: glibc-static pcre-static glib2-static zlib-static %endif # Requires for the Fedora 'qemu' metapackage Requires: %{name}-user = %{epoch}:%{version}-%{release} Requires: %{name}-system-aarch64 = %{epoch}:%{version}-%{release} Requires: %{name}-system-alpha = %{epoch}:%{version}-%{release} Requires: %{name}-system-arm = %{epoch}:%{version}-%{release} Requires: %{name}-system-avr = %{epoch}:%{version}-%{release} Requires: %{name}-system-cris = %{epoch}:%{version}-%{release} Requires: %{name}-system-m68k = %{epoch}:%{version}-%{release} Requires: %{name}-system-microblaze = %{epoch}:%{version}-%{release} Requires: %{name}-system-mips = %{epoch}:%{version}-%{release} Requires: %{name}-system-nios2 = %{epoch}:%{version}-%{release} Requires: %{name}-system-or1k = %{epoch}:%{version}-%{release} Requires: %{name}-system-ppc = %{epoch}:%{version}-%{release} Requires: %{name}-system-riscv = %{epoch}:%{version}-%{release} Requires: %{name}-system-rx = %{epoch}:%{version}-%{release} Requires: %{name}-system-s390x = %{epoch}:%{version}-%{release} Requires: %{name}-system-sh4 = %{epoch}:%{version}-%{release} Requires: %{name}-system-sparc = %{epoch}:%{version}-%{release} Requires: %{name}-system-tricore = %{epoch}:%{version}-%{release} Requires: %{name}-system-x86 = %{epoch}:%{version}-%{release} Requires: %{name}-system-xtensa = %{epoch}:%{version}-%{release} Requires: %{name}-img = %{epoch}:%{version}-%{release} Requires: %{name}-tools = %{epoch}:%{version}-%{release} Requires: qemu-pr-helper = %{epoch}:%{version}-%{release} %description %{name} is an open source virtualizer that provides hardware emulation for the KVM hypervisor. %{name} acts as a virtual machine monitor together with the KVM kernel modules, and emulates the hardware for a full system such as a PC and its associated peripherals. %package common Summary: QEMU common files needed by all QEMU targets Requires(post): /usr/bin/getent Requires(post): /usr/sbin/groupadd Requires(post): /usr/sbin/useradd Requires(post): systemd-units Requires(preun): systemd-units Requires(postun): systemd-units %{obsoletes_some_modules} Requires: ipxe-roms-qemu >= %{ipxe_version} %description common %{name} is an open source virtualizer that provides hardware emulation for the KVM hypervisor. This package provides documentation and auxiliary programs used with %{name}. %package docs Summary: %{name} documentation %description docs %{name}-docs provides documentation files regarding %{name}. %package -n qemu-img Summary: QEMU command line tool for manipulating disk images %description -n qemu-img This package provides a command line tool for manipulating disk images. %package -n qemu-guest-agent Summary: QEMU guest agent Requires(post): systemd-units Requires(preun): systemd-units Requires(postun): systemd-units %description -n qemu-guest-agent %{name} is an open source virtualizer that provides hardware emulation for the KVM hypervisor. This package provides an agent to run inside guests, which communicates with the host over a virtio-serial channel named "org.qemu.guest_agent.0" This package does not need to be installed on the host OS. %package tools Summary: %{name} support tools %description tools %{name}-tools provides various tools related to %{name} usage. %package -n qemu-pr-helper Summary: qemu-pr-helper utility for %{name} %description -n qemu-pr-helper This package provides the qemu-pr-helper utility that is required for certain SCSI features. %package tests Summary: tests for the %{name} package Requires: %{name} = %{epoch}:%{version}-%{release} %define testsdir %{_libdir}/%{name}/tests-src %description tests The %{name}-tests rpm contains tests that can be used to verify the functionality of the installed %{name} package Install this package if you want access to the avocado_qemu tests, or qemu-iotests. %package block-curl Summary: QEMU CURL block driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description block-curl This package provides the additional CURL block driver for QEMU. Install this package if you want to access remote disks over http, https, ftp and other transports provided by the CURL library. %package block-iscsi Summary: QEMU iSCSI block driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description block-iscsi This package provides the additional iSCSI block driver for QEMU. Install this package if you want to access iSCSI volumes. %if %{have_block_rbd} %package block-rbd Summary: QEMU Ceph/RBD block driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description block-rbd This package provides the additional Ceph/RBD block driver for QEMU. Install this package if you want to access remote Ceph volumes using the rbd protocol. %endif %package block-ssh Summary: QEMU SSH block driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description block-ssh This package provides the additional SSH block driver for QEMU. Install this package if you want to access remote disks using the Secure Shell (SSH) protocol. %if %{have_opengl} %package ui-opengl Summary: QEMU opengl support Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} Requires: mesa-libGL Requires: mesa-libEGL Requires: mesa-dri-drivers %description ui-opengl This package provides opengl support. %endif # Fedora specific %package block-dmg Summary: QEMU block driver for DMG disk images Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description block-dmg This package provides the additional DMG block driver for QEMU. Install this package if you want to open '.dmg' files. %if %{have_block_gluster} %package block-gluster Summary: QEMU Gluster block driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description block-gluster This package provides the additional Gluster block driver for QEMU. Install this package if you want to access remote Gluster storage. %endif %if %{have_block_nfs} %package block-nfs Summary: QEMU NFS block driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description block-nfs This package provides the additional NFS block driver for QEMU. Install this package if you want to access remote NFS storage. %endif %package audio-alsa Summary: QEMU ALSA audio driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description audio-alsa This package provides the additional ALSA audio driver for QEMU. %package audio-oss Summary: QEMU OSS audio driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description audio-oss This package provides the additional OSS audio driver for QEMU. %package audio-pa Summary: QEMU PulseAudio audio driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description audio-pa This package provides the additional PulseAudi audio driver for QEMU. %package audio-sdl Summary: QEMU SDL audio driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description audio-sdl This package provides the additional SDL audio driver for QEMU. %if %{have_jack} %package audio-jack Summary: QEMU Jack audio driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description audio-jack This package provides the additional Jack audio driver for QEMU. %endif %package ui-curses Summary: QEMU curses UI driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description ui-curses This package provides the additional curses UI for QEMU. %package ui-gtk Summary: QEMU GTK UI driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} Requires: %{name}-ui-opengl%{?_isa} = %{epoch}:%{version}-%{release} %description ui-gtk This package provides the additional GTK UI for QEMU. %package ui-sdl Summary: QEMU SDL UI driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} Requires: %{name}-ui-opengl%{?_isa} = %{epoch}:%{version}-%{release} %description ui-sdl This package provides the additional SDL UI for QEMU. %package ui-egl-headless Summary: QEMU EGL headless driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} Requires: %{name}-ui-opengl%{?_isa} = %{epoch}:%{version}-%{release} %description ui-egl-headless This package provides the additional egl-headless UI for QEMU. %package char-baum Summary: QEMU Baum chardev driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description char-baum This package provides the Baum chardev driver for QEMU. %package device-display-virtio-gpu Summary: QEMU virtio-gpu display device Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description device-display-virtio-gpu This package provides the virtio-gpu display device for QEMU. %package device-display-virtio-gpu-gl Summary: QEMU virtio-gpu-gl display device Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description device-display-virtio-gpu-gl This package provides the virtio-gpu-gl display device for QEMU. %package device-display-virtio-gpu-pci Summary: QEMU virtio-gpu-pci display device Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description device-display-virtio-gpu-pci This package provides the virtio-gpu-pci display device for QEMU. %package device-display-virtio-gpu-pci-gl Summary: QEMU virtio-gpu-pci-gl display device Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description device-display-virtio-gpu-pci-gl This package provides the virtio-gpu-pci-gl display device for QEMU. %package device-display-virtio-gpu-ccw Summary: QEMU virtio-gpu-ccw display device Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description device-display-virtio-gpu-ccw This package provides the virtio-gpu-ccw display device for QEMU. %package device-display-virtio-vga Summary: QEMU virtio-vga display device Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description device-display-virtio-vga This package provides the virtio-vga display device for QEMU. %package device-display-virtio-vga-gl Summary: QEMU virtio-vga-gl display device Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description device-display-virtio-vga-gl This package provides the virtio-vga-gl display device for QEMU. %package device-usb-host Summary: QEMU usb host device Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description device-usb-host This package provides the USB pass through driver for QEMU. %package device-usb-redirect Summary: QEMU usbredir device Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description device-usb-redirect This package provides the usbredir device for QEMU. %package device-usb-smartcard Summary: QEMU USB smartcard device Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description device-usb-smartcard This package provides the USB smartcard device for QEMU. %if %{have_virgl} %package device-display-vhost-user-gpu Summary: QEMU QXL display device Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} %description device-display-vhost-user-gpu This package provides the vhost-user-gpu display device for QEMU. %endif %if %{have_spice} %package ui-spice-core Summary: QEMU spice-core UI driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} Requires: %{name}-ui-opengl%{?_isa} = %{epoch}:%{version}-%{release} %description ui-spice-core This package provides the additional spice-core UI for QEMU. %package ui-spice-app Summary: QEMU spice-app UI driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} Requires: %{name}-ui-spice-core%{?_isa} = %{epoch}:%{version}-%{release} Requires: %{name}-char-spice%{?_isa} = %{epoch}:%{version}-%{release} %description ui-spice-app This package provides the additional spice-app UI for QEMU. %package device-display-qxl Summary: QEMU QXL display device Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} Requires: %{name}-ui-spice-core%{?_isa} = %{epoch}:%{version}-%{release} %description device-display-qxl This package provides the QXL display device for QEMU. %package char-spice Summary: QEMU spice chardev driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} Requires: %{name}-ui-spice-core%{?_isa} = %{epoch}:%{version}-%{release} %description char-spice This package provides the spice chardev driver for QEMU. %package audio-spice Summary: QEMU spice audio driver Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release} Requires: %{name}-ui-spice-core%{?_isa} = %{epoch}:%{version}-%{release} %description audio-spice This package provides the spice audio driver for QEMU. %endif %if %{have_kvm} %package kvm Summary: QEMU metapackage for KVM support Requires: qemu-%{kvm_package} = %{epoch}:%{version}-%{release} %description kvm This is a meta-package that provides a qemu-system- package for native architectures where kvm can be enabled. For example, in an x86 system, this will install qemu-system-x86 %package kvm-core Summary: QEMU metapackage for KVM support Requires: qemu-%{kvm_package}-core = %{epoch}:%{version}-%{release} %description kvm-core This is a meta-package that provides a qemu-system--core package for native architectures where kvm can be enabled. For example, in an x86 system, this will install qemu-system-x86-core %endif %package user Summary: QEMU user mode emulation of qemu targets Requires: %{name}-common = %{epoch}:%{version}-%{release} %description user This package provides the user mode emulation of qemu targets %package user-binfmt Summary: QEMU user mode emulation of qemu targets Requires: %{name}-user = %{epoch}:%{version}-%{release} Requires(post): systemd-units Requires(postun): systemd-units # qemu-user-binfmt + qemu-user-static both provide binfmt rules # Temporarily disable to get fedora CI working. Re-enable # once this CI issue let's us deal with subpackage conflicts: # https://pagure.io/fedora-ci/general/issue/184 #Conflicts: qemu-user-static %description user-binfmt This package provides the user mode emulation of qemu targets %if %{user_static} %package user-static Summary: QEMU user mode emulation of qemu targets static build Requires: %{name}-common = %{epoch}:%{version}-%{release} Requires(post): systemd-units Requires(postun): systemd-units # qemu-user-binfmt + qemu-user-static both provide binfmt rules # Temporarily disable to get fedora CI working. Re-enable # once this CI issue let's us deal with subpackage conflicts: # https://pagure.io/fedora-ci/general/issue/184 #Conflicts: qemu-user-binfmt #Provides: qemu-user-binfmt %description user-static This package provides the user mode emulation of qemu targets built as static binaries %endif %package system-aarch64 Summary: QEMU system emulator for AArch64 Requires: %{name}-system-aarch64-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-aarch64 This package provides the QEMU system emulator for AArch64. %package system-aarch64-core Summary: QEMU system emulator for AArch64 Requires: %{name}-common = %{epoch}:%{version}-%{release} %if %{have_edk2} Requires: edk2-aarch64 %endif %description system-aarch64-core This package provides the QEMU system emulator for AArch64. %package system-alpha Summary: QEMU system emulator for Alpha Requires: %{name}-system-alpha-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-alpha This package provides the QEMU system emulator for Alpha systems. %package system-alpha-core Summary: QEMU system emulator for Alpha Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-alpha-core This package provides the QEMU system emulator for Alpha systems. %package system-arm Summary: QEMU system emulator for ARM Requires: %{name}-system-arm-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-arm This package provides the QEMU system emulator for ARM systems. %package system-arm-core Summary: QEMU system emulator for ARM Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-arm-core This package provides the QEMU system emulator for ARM boards. %package system-avr Summary: QEMU system emulator for AVR Requires: %{name}-system-avr-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-avr This package provides the QEMU system emulator for AVR systems. %package system-avr-core Summary: QEMU system emulator for AVR Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-avr-core This package provides the QEMU system emulator for AVR systems. %package system-cris Summary: QEMU system emulator for CRIS Requires: %{name}-system-cris-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-cris This package provides the system emulator for CRIS systems. %package system-cris-core Summary: QEMU system emulator for CRIS Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-cris-core This package provides the system emulator for CRIS boards. %package system-hppa Summary: QEMU system emulator for HPPA Requires: %{name}-system-hppa-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-hppa This package provides the QEMU system emulator for HPPA. %package system-hppa-core Summary: QEMU system emulator for hppa Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-hppa-core This package provides the QEMU system emulator for HPPA. %package system-m68k Summary: QEMU system emulator for ColdFire (m68k) Requires: %{name}-system-m68k-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-m68k This package provides the QEMU system emulator for ColdFire boards. %package system-m68k-core Summary: QEMU system emulator for ColdFire (m68k) Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-m68k-core This package provides the QEMU system emulator for ColdFire boards. %package system-microblaze Summary: QEMU system emulator for Microblaze Requires: %{name}-system-microblaze-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-microblaze This package provides the QEMU system emulator for Microblaze boards. %package system-microblaze-core Summary: QEMU system emulator for Microblaze Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-microblaze-core This package provides the QEMU system emulator for Microblaze boards. %package system-mips Summary: QEMU system emulator for MIPS Requires: %{name}-system-mips-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-mips This package provides the QEMU system emulator for MIPS systems. %package system-mips-core Summary: QEMU system emulator for MIPS Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-mips-core This package provides the QEMU system emulator for MIPS systems. %package system-nios2 Summary: QEMU system emulator for nios2 Requires: %{name}-system-nios2-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-nios2 This package provides the QEMU system emulator for NIOS2. %package system-nios2-core Summary: QEMU system emulator for nios2 Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-nios2-core This package provides the QEMU system emulator for NIOS2. %package system-or1k Summary: QEMU system emulator for OpenRisc32 Requires: %{name}-system-or1k-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-or1k This package provides the QEMU system emulator for OpenRisc32 boards. %package system-or1k-core Summary: QEMU system emulator for OpenRisc32 Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-or1k-core This package provides the QEMU system emulator for OpenRisc32 boards. %package system-ppc Summary: QEMU system emulator for PPC Requires: %{name}-system-ppc-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-ppc This package provides the QEMU system emulator for PPC and PPC64 systems. %package system-ppc-core Summary: QEMU system emulator for PPC Requires: %{name}-common = %{epoch}:%{version}-%{release} Requires: openbios Requires: SLOF Requires: seavgabios-bin %description system-ppc-core This package provides the QEMU system emulator for PPC and PPC64 systems. %package system-riscv Summary: QEMU system emulator for RISC-V Requires: %{name}-system-riscv-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-riscv This package provides the QEMU system emulator for RISC-V systems. %package system-riscv-core Summary: QEMU system emulator for RISC-V Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-riscv-core This package provides the QEMU system emulator for RISC-V systems. %package system-rx Summary: QEMU system emulator for RX Requires: %{name}-system-rx-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-rx This package provides the QEMU system emulator for RX systems. %package system-rx-core Summary: QEMU system emulator for RX Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-rx-core This package provides the QEMU system emulator for RX systems. %package system-s390x Summary: QEMU system emulator for S390 Requires: %{name}-system-s390x-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-s390x This package provides the QEMU system emulator for S390 systems. %package system-s390x-core Summary: QEMU system emulator for S390 Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-s390x-core This package provides the QEMU system emulator for S390 systems. %package system-sh4 Summary: QEMU system emulator for SH4 Requires: %{name}-system-sh4-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-sh4 This package provides the QEMU system emulator for SH4 boards. %package system-sh4-core Summary: QEMU system emulator for SH4 Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-sh4-core This package provides the QEMU system emulator for SH4 boards. %package system-sparc Summary: QEMU system emulator for SPARC Requires: %{name}-system-sparc-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-sparc This package provides the QEMU system emulator for SPARC and SPARC64 systems. %package system-sparc-core Summary: QEMU system emulator for SPARC Requires: %{name}-common = %{epoch}:%{version}-%{release} Requires: openbios %description system-sparc-core This package provides the QEMU system emulator for SPARC and SPARC64 systems. %package system-tricore Summary: QEMU system emulator for tricore Requires: %{name}-system-tricore-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-tricore This package provides the QEMU system emulator for Tricore. %package system-tricore-core Summary: QEMU system emulator for tricore Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-tricore-core This package provides the QEMU system emulator for Tricore. %package system-x86 Summary: QEMU system emulator for x86 Requires: %{name}-system-x86-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-x86 This package provides the QEMU system emulator for x86. When being run in a x86 machine that supports it, this package also provides the KVM virtualization platform. %package system-x86-core Summary: QEMU system emulator for x86 Requires: %{name}-common = %{epoch}:%{version}-%{release} Requires: seabios-bin Requires: sgabios-bin Requires: seavgabios-bin %if %{have_edk2} Requires: edk2-ovmf %endif %description system-x86-core This package provides the QEMU system emulator for x86. When being run in a x86 machine that supports it, this package also provides the KVM virtualization platform. %package system-xtensa Summary: QEMU system emulator for Xtensa Requires: %{name}-system-xtensa-core = %{epoch}:%{version}-%{release} %{requires_all_modules} %description system-xtensa This package provides the QEMU system emulator for Xtensa boards. %package system-xtensa-core Summary: QEMU system emulator for Xtensa Requires: %{name}-common = %{epoch}:%{version}-%{release} %description system-xtensa-core This package provides the QEMU system emulator for Xtensa boards. %prep %setup -q -n qemu-%{version}%{?rcstr} %autopatch -p1 %global qemu_kvm_build qemu_kvm_build mkdir -p %{qemu_kvm_build} %global static_builddir static_builddir mkdir -p %{static_builddir} %build %define disable_everything \\\ --audio-drv-list= \\\ --disable-attr \\\ --disable-auth-pam \\\ --disable-avx2 \\\ --disable-avx512f \\\ --disable-block-drv-whitelist-in-tools \\\ --disable-bpf \\\ --disable-bochs \\\ --disable-brlapi \\\ --disable-bsd-user \\\ --disable-bzip2 \\\ --disable-cap-ng \\\ --disable-capstone \\\ --disable-cfi \\\ --disable-cfi-debug \\\ --disable-cloop \\\ --disable-cocoa \\\ --disable-coroutine-pool \\\ --disable-crypto-afalg \\\ --disable-curl \\\ --disable-curses \\\ --disable-debug-info \\\ --disable-debug-mutex \\\ --disable-debug-tcg \\\ --disable-dmg \\\ --disable-docs \\\ --disable-fdt \\\ --disable-fuse \\\ --disable-fuse-lseek \\\ --disable-gcrypt \\\ --disable-gio \\\ --disable-glusterfs \\\ --disable-gnutls \\\ --disable-gtk \\\ --disable-guest-agent \\\ --disable-guest-agent-msi \\\ --disable-hax \\\ --disable-hvf \\\ --disable-iconv \\\ --disable-kvm \\\ --disable-libdaxctl \\\ --disable-libiscsi \\\ --disable-libnfs \\\ --disable-libpmem \\\ --disable-libssh \\\ --disable-libudev \\\ --disable-libusb \\\ --disable-libxml2 \\\ --disable-linux-aio \\\ --disable-linux-io-uring \\\ --disable-linux-user \\\ --disable-live-block-migration \\\ --disable-lto \\\ --disable-lzfse \\\ --disable-lzo \\\ --disable-malloc-trim \\\ --disable-membarrier \\\ --disable-modules \\\ --disable-module-upgrades \\\ --disable-mpath \\\ --disable-multiprocess \\\ --disable-netmap \\\ --disable-nettle \\\ --disable-numa \\\ --disable-opengl \\\ --disable-parallels \\\ --disable-pie \\\ --disable-pvrdma \\\ --disable-qcow1 \\\ --disable-qed \\\ --disable-qom-cast-debug \\\ --disable-rbd \\\ --disable-rdma \\\ --disable-replication \\\ --disable-rng-none \\\ --disable-safe-stack \\\ --disable-sanitizers \\\ --disable-sdl \\\ --disable-sdl-image \\\ --disable-seccomp \\\ --disable-slirp \\\ --disable-slirp-smbd \\\ --disable-smartcard \\\ --disable-snappy \\\ --disable-sparse \\\ --disable-spice \\\ --disable-spice-protocol \\\ --disable-strip \\\ --disable-system \\\ --disable-tcg \\\ --disable-tools \\\ --disable-tpm \\\ --disable-u2f \\\ --disable-usb-redir \\\ --disable-user \\\ --disable-vde \\\ --disable-vdi \\\ --disable-vhost-crypto \\\ --disable-vhost-kernel \\\ --disable-vhost-net \\\ --disable-vhost-scsi \\\ --disable-vhost-user \\\ --disable-vhost-user-blk-server \\\ --disable-vhost-vdpa \\\ --disable-vhost-vsock \\\ --disable-virglrenderer \\\ --disable-virtfs \\\ --disable-virtiofsd \\\ --disable-vnc \\\ --disable-vnc-jpeg \\\ --disable-vnc-png \\\ --disable-vnc-sasl \\\ --disable-vte \\\ --disable-vvfat \\\ --disable-werror \\\ --disable-whpx \\\ --disable-xen \\\ --disable-xen-pci-passthrough \\\ --disable-xfsctl \\\ --disable-xkbcommon \\\ --disable-zstd \\\ --with-git-submodules=ignore \\\ --without-default-devices run_configure() { ../configure \ --cc=%{__cc} \ --cxx=/bin/false \ --prefix="%{_prefix}" \ --libdir="%{_libdir}" \ --datadir="%{_datadir}" \ --sysconfdir="%{_sysconfdir}" \ --interp-prefix=%{_prefix}/qemu-%M \ --localstatedir="%{_localstatedir}" \ --docdir="%{_docdir}" \ --libexecdir="%{_libexecdir}" \ --extra-ldflags="%{build_ldflags}" \ %ifnarch %{arm} --extra-cflags="%{optflags}" \ %else --extra-cflags="%{optflags} -DSTAP_SDT_ARG_CONSTRAINT=g" \ %endif --with-pkgversion="%{name}-%{version}-%{release}" \ --with-suffix="%{name}" \ --firmwarepath="%firmwaredirs" \ --meson="%{__meson}" \ --enable-trace-backends=dtrace \ --with-coroutine=ucontext \ --with-git=git \ --tls-priority=@QEMU,SYSTEM \ %{disable_everything} \ "$@" echo "config-host.mak contents:" echo "===" cat config-host.mak echo "===" } pushd %{qemu_kvm_build} run_configure \ %if %{defined target_list} --target-list="%{target_list}" \ %endif %if %{defined block_drivers_rw_list} --block-drv-rw-whitelist=%{block_drivers_rw_list} \ %endif %if %{defined block_drivers_ro_list} --block-drv-ro-whitelist=%{block_drivers_ro_list} \ %endif --enable-attr \ %ifarch %{ix86} x86_64 --enable-avx2 \ %endif --enable-bpf \ --enable-cap-ng \ %if %{have_capstone_devel} --enable-capstone=system \ %else --enable-capstone \ %endif --enable-coroutine-pool \ --enable-curl \ --enable-debug-info \ --enable-docs \ %if %{have_fdt} --enable-fdt=system \ %endif --enable-gnutls \ --enable-guest-agent \ --enable-iconv \ --enable-kvm \ --enable-libiscsi \ %if %{have_pmem} --enable-libpmem \ %endif --enable-libssh \ --enable-libusb \ --enable-libudev \ --enable-linux-aio \ %if "%{_lto_cflags}" != "%{nil}" --enable-lto \ %endif --enable-lzo \ --enable-malloc-trim \ --enable-modules \ --enable-mpath \ %if %{have_numactl} --enable-numa \ %endif %if %{have_opengl} --enable-opengl \ %endif --enable-pie \ %if %{have_block_rbd} --enable-rbd \ %endif %if %{have_librdma} --enable-rdma \ %endif --enable-seccomp \ %if 0%{?must_remember_to_add_this_in_qemu_6_2} --enable-selinux \ %endif --enable-slirp=system \ --enable-slirp-smbd \ --enable-snappy \ --enable-system \ --enable-tcg \ --enable-tools \ --enable-tpm \ %if %{have_usbredir} --enable-usb-redir \ %endif --enable-virtiofsd \ --enable-vhost-kernel \ --enable-vhost-net \ --enable-vhost-user \ --enable-vhost-user-blk-server \ --enable-vhost-vdpa \ --enable-vhost-vsock \ --enable-vnc \ --enable-vnc-png \ --enable-vnc-sasl \ %if %{enable_werror} --enable-werror \ %endif --enable-xkbcommon \ \ \ %if %{have_jack} --audio-drv-list=pa,sdl,alsa,jack,oss \ %else --audio-drv-list=pa,sdl,alsa,oss \ %endif --target-list-exclude=moxie-softmmu \ --with-default-devices \ --enable-auth-pam \ --enable-bochs \ --enable-brlapi \ --enable-bzip2 \ --enable-cloop \ --enable-curses \ --enable-dmg \ --enable-fuse \ --enable-gio \ --enable-glusterfs \ --enable-gtk \ --enable-libdaxctl \ %if %{have_block_nfs} --enable-libnfs \ %endif --enable-libudev \ --enable-libxml2 \ %if %{have_liburing} --enable-linux-io-uring \ %endif --enable-linux-user \ --enable-live-block-migration \ --enable-multiprocess \ --enable-vnc-jpeg \ --enable-parallels \ %if %{have_librdma} --enable-pvrdma \ %endif --enable-qcow1 \ --enable-qed \ --enable-qom-cast-debug \ --enable-replication \ --enable-sdl \ %if %{have_sdl_image} --enable-sdl-image \ %endif --enable-smartcard \ %if %{have_spice} --enable-spice \ --enable-spice-protocol \ %endif --enable-usb-redir \ --enable-vdi \ --enable-vhost-crypto \ --enable-vhost-scsi \ %if %{have_virgl} --enable-virglrenderer \ %endif --enable-virtfs \ --enable-vnc-jpeg \ --enable-vte \ --enable-vvfat \ %if %{have_xen} --enable-xen \ --enable-xen-pci-passthrough \ %endif --enable-zstd \ %if %{tools_only} %make_build qemu-img %make_build qemu-io %make_build qemu-nbd %make_build storage-daemon/qemu-storage-daemon %make_build docs/qemu-img.1 %make_build docs/qemu-nbd.8 %make_build docs/qemu-storage-daemon.1 %make_build docs/qemu-storage-daemon-qmp-ref.7 %make_build qga/qemu-ga %make_build docs/qemu-ga.8 # endif tools_only %endif %if !%{tools_only} %make_build popd # Fedora build for qemu-user-static %if %{user_static} pushd %{static_builddir} run_configure \ --enable-attr \ --enable-linux-user \ --enable-tcg \ --disable-install-blobs \ --static %make_build popd # static %endif # endif !tools_only %endif %install # Install qemu-guest-agent service and udev rules install -D -m 0644 %{_sourcedir}/qemu-guest-agent.service %{buildroot}%{_unitdir}/qemu-guest-agent.service install -D -m 0644 %{_sourcedir}/qemu-ga.sysconfig %{buildroot}%{_sysconfdir}/sysconfig/qemu-ga install -D -m 0644 %{_sourcedir}/99-qemu-guest-agent.rules %{buildroot}%{_udevrulesdir}/99-qemu-guest-agent.rules # Install qemu-ga fsfreeze bits mkdir -p %{buildroot}%{_sysconfdir}/qemu-ga/fsfreeze-hook.d install -p scripts/qemu-guest-agent/fsfreeze-hook %{buildroot}%{_sysconfdir}/qemu-ga/fsfreeze-hook mkdir -p %{buildroot}%{_datadir}/%{name}/qemu-ga/fsfreeze-hook.d/ install -p -m 0644 scripts/qemu-guest-agent/fsfreeze-hook.d/*.sample %{buildroot}%{_datadir}/%{name}/qemu-ga/fsfreeze-hook.d/ mkdir -p -v %{buildroot}%{_localstatedir}/log/qemu-ga/ %if %{tools_only} pushd %{qemu_kvm_build} install -D -p -m 0755 qga/qemu-ga %{buildroot}%{_bindir}/qemu-ga install -D -p -m 0755 qemu-img %{buildroot}%{_bindir}/qemu-img install -D -p -m 0755 qemu-io %{buildroot}%{_bindir}/qemu-io install -D -p -m 0755 qemu-nbd %{buildroot}%{_bindir}/qemu-nbd install -D -p -m 0755 storage-daemon/qemu-storage-daemon %{buildroot}%{_bindir}/qemu-storage-daemon mkdir -p %{buildroot}%{_mandir}/man1/ mkdir -p %{buildroot}%{_mandir}/man7/ mkdir -p %{buildroot}%{_mandir}/man8/ install -D -p -m 644 docs/qemu-img.1* %{buildroot}%{_mandir}/man1 install -D -p -m 644 docs/qemu-nbd.8* %{buildroot}%{_mandir}/man8 install -D -p -m 644 docs/qemu-storage-daemon.1* %{buildroot}%{_mandir}/man1 install -D -p -m 644 docs/qemu-storage-daemon-qmp-ref.7* %{buildroot}%{_mandir}/man7 install -D -p -m 644 docs/qemu-ga.8* %{buildroot}%{_mandir}/man8 popd # endif tools_only %endif %if !%{tools_only} # Install rules to use the bridge helper with libvirt's virbr0 install -D -m 0644 %{_sourcedir}/bridge.conf %{buildroot}%{_sysconfdir}/%{name}/bridge.conf # Install qemu-pr-helper service install -m 0644 contrib/systemd/qemu-pr-helper.service %{buildroot}%{_unitdir} install -m 0644 contrib/systemd/qemu-pr-helper.socket %{buildroot}%{_unitdir} %if %{have_memlock_limits} install -D -p -m 644 %{_sourcedir}/95-kvm-memlock.conf %{buildroot}%{_sysconfdir}/security/limits.d/95-kvm-memlock.conf %endif %if %{have_kvm} install -D -p -m 0644 %{_sourcedir}/vhost.conf %{buildroot}%{_sysconfdir}/modprobe.d/vhost.conf install -D -p -m 0644 %{modprobe_kvm_conf} %{buildroot}%{_sysconfdir}/modprobe.d/kvm.conf %endif # Copy some static data into place install -D -p -m 0644 -t %{buildroot}%{qemudocdir} README.rst COPYING COPYING.LIB LICENSE docs/interop/qmp-spec.txt install -D -p -m 0644 qemu.sasl %{buildroot}%{_sysconfdir}/sasl2/%{name}.conf install -m 0644 scripts/dump-guest-memory.py %{buildroot}%{_datadir}/%{name} # Install simpletrace install -m 0755 scripts/simpletrace.py %{buildroot}%{_datadir}/%{name}/simpletrace.py mkdir -p %{buildroot}%{_datadir}/%{name}/tracetool install -m 0644 -t %{buildroot}%{_datadir}/%{name}/tracetool scripts/tracetool/*.py mkdir -p %{buildroot}%{_datadir}/%{name}/tracetool/backend install -m 0644 -t %{buildroot}%{_datadir}/%{name}/tracetool/backend scripts/tracetool/backend/*.py mkdir -p %{buildroot}%{_datadir}/%{name}/tracetool/format install -m 0644 -t %{buildroot}%{_datadir}/%{name}/tracetool/format scripts/tracetool/format/*.py # Create new directories and put them all under tests-src mkdir -p %{buildroot}%{testsdir}/python mkdir -p %{buildroot}%{testsdir}/tests mkdir -p %{buildroot}%{testsdir}/tests/avocado mkdir -p %{buildroot}%{testsdir}/tests/qemu-iotests mkdir -p %{buildroot}%{testsdir}/scripts/qmp # Install avocado_qemu tests cp -R %{qemu_kvm_build}/tests/avocado/* %{buildroot}%{testsdir}/tests/avocado/ # Install qemu.py and qmp/ scripts required to run avocado_qemu tests cp -R %{qemu_kvm_build}/python/qemu %{buildroot}%{testsdir}/python cp -R %{qemu_kvm_build}/scripts/qmp/* %{buildroot}%{testsdir}/scripts/qmp install -p -m 0755 tests/Makefile.include %{buildroot}%{testsdir}/tests/ # Install qemu-iotests cp -R tests/qemu-iotests/* %{buildroot}%{testsdir}/tests/qemu-iotests/ cp -ur %{qemu_kvm_build}/tests/qemu-iotests/* %{buildroot}%{testsdir}/tests/qemu-iotests/ # Install our custom tests README install -p -m 0644 %{_sourcedir}/README.tests %{buildroot}%{testsdir}/README # Do the actual qemu tree install pushd %{qemu_kvm_build} %make_install popd # We need to make the block device modules and other qemu SO files executable # otherwise RPM won't pick up their dependencies. chmod +x %{buildroot}%{_libdir}/%{name}/*.so # Remove docs we don't care about find %{buildroot}%{qemudocdir} -name .buildinfo -delete rm -rf %{buildroot}%{qemudocdir}/specs # Provided by package openbios rm -rf %{buildroot}%{_datadir}/%{name}/openbios-ppc rm -rf %{buildroot}%{_datadir}/%{name}/openbios-sparc32 rm -rf %{buildroot}%{_datadir}/%{name}/openbios-sparc64 # Provided by package SLOF rm -rf %{buildroot}%{_datadir}/%{name}/slof.bin # Provided by package ipxe rm -rf %{buildroot}%{_datadir}/%{name}/pxe*rom rm -rf %{buildroot}%{_datadir}/%{name}/efi*rom # Provided by package seavgabios rm -rf %{buildroot}%{_datadir}/%{name}/vgabios*bin # Provided by package seabios rm -rf %{buildroot}%{_datadir}/%{name}/bios*.bin # Provided by package sgabios rm -rf %{buildroot}%{_datadir}/%{name}/sgabios.bin # Provided by edk2 rm -rf %{buildroot}%{_datadir}/%{name}/edk2* rm -rf %{buildroot}%{_datadir}/%{name}/firmware # Fedora specific stuff below %find_lang %{name} # Generate qemu-system-* man pages chmod -x %{buildroot}%{_mandir}/man1/* for emu in %{buildroot}%{_bindir}/qemu-system-*; do ln -sf qemu.1.gz %{buildroot}%{_mandir}/man1/$(basename $emu).1.gz done # Install kvm specific source bits, and qemu-kvm manpage %if %{need_qemu_kvm} ln -sf qemu.1.gz %{buildroot}%{_mandir}/man1/qemu-kvm.1.gz ln -sf qemu-system-x86_64 %{buildroot}%{_bindir}/qemu-kvm %endif # Install binfmt %global binfmt_dir %{buildroot}%{_exec_prefix}/lib/binfmt.d mkdir -p %{binfmt_dir} ./scripts/qemu-binfmt-conf.sh --systemd ALL --exportdir %{binfmt_dir} --qemu-path %{_bindir} for i in %{binfmt_dir}/*; do mv $i $(echo $i | sed 's/.conf/-dynamic.conf/'); done # Install qemu-user-static tree %if %{user_static} %define static_buildroot %{buildroot}/static/ mkdir -p %{static_buildroot} pushd %{static_builddir} make DESTDIR=%{static_buildroot} install popd # static # Rename all QEMU user emulators to have a -static suffix for src in %{static_buildroot}%{_bindir}/qemu-*; do mv $src %{buildroot}%{_bindir}/$(basename $src)-static; done # Rename trace files to match -static suffix for src in %{static_buildroot}%{_datadir}/systemtap/tapset/qemu-*.stp; do dst=`echo $src | sed -e 's/.stp/-static.stp/'` mv $src $dst perl -i -p -e 's/(qemu-\w+)/$1-static/g; s/(qemu\.user\.\w+)/$1.static/g' $dst mv $dst %{buildroot}%{_datadir}/systemtap/tapset done for regularfmt in %{binfmt_dir}/*; do staticfmt="$(echo $regularfmt | sed 's/-dynamic/-static/g')" cat $regularfmt | tr -d '\n' | sed "s/:$/-static:F/" > $staticfmt done rm -rf %{static_buildroot} # endif user_static %endif # end Fedora specific # endif !tools_only %endif %check %if %{with check} %if !%{tools_only} pushd %{qemu_kvm_build} echo "Testing %{name}-build" # 2021-09: s390x tests randomly failing with 'Broken pipe' errors # dhorak couldn't reproduce locally on an s390x machine so guessed # it's a resource issue # 2021-09: ppc64le intermittently hanging with no discernable pattern %ifnarch s390x %{power64} %make_build check %endif popd # endif !tools_only %endif # endif with check %endif %post -n qemu-guest-agent %systemd_post qemu-guest-agent.service %preun -n qemu-guest-agent %systemd_preun qemu-guest-agent.service %postun -n qemu-guest-agent %systemd_postun_with_restart qemu-guest-agent.service %if !%{tools_only} %post common getent group kvm >/dev/null || groupadd -g 36 -r kvm getent group qemu >/dev/null || groupadd -g 107 -r qemu getent passwd qemu >/dev/null || \ useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin \ -c "qemu user" qemu %post user-binfmt /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %postun user-binfmt /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %if %{user_static} %post user-static /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %postun user-static /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || : %endif # endif !tools_only %endif %files -n qemu-img %{_bindir}/qemu-img %{_bindir}/qemu-io %{_bindir}/qemu-nbd %{_bindir}/qemu-storage-daemon %{_mandir}/man1/qemu-img.1* %{_mandir}/man8/qemu-nbd.8* %{_mandir}/man1/qemu-storage-daemon.1* %{_mandir}/man7/qemu-storage-daemon-qmp-ref.7* %files -n qemu-guest-agent %doc COPYING README.rst %{_bindir}/qemu-ga %{_mandir}/man8/qemu-ga.8* %{_unitdir}/qemu-guest-agent.service %{_udevrulesdir}/99-qemu-guest-agent.rules %config(noreplace) %{_sysconfdir}/sysconfig/qemu-ga %{_sysconfdir}/qemu-ga %{_datadir}/%{name}/qemu-ga %dir %{_localstatedir}/log/qemu-ga %if !%{tools_only} %files # Deliberately empty %files -n qemu-pr-helper %{_bindir}/qemu-pr-helper %{_unitdir}/qemu-pr-helper.service %{_unitdir}/qemu-pr-helper.socket %{_mandir}/man8/qemu-pr-helper.8* %files tools %{_bindir}/qemu-keymap %{_bindir}/qemu-edid %{_bindir}/qemu-trace-stap %{_datadir}/%{name}/simpletrace.py* %{_datadir}/%{name}/tracetool/*.py* %{_datadir}/%{name}/tracetool/backend/*.py* %{_datadir}/%{name}/tracetool/format/*.py* %{_datadir}/%{name}/dump-guest-memory.py* %{_datadir}/%{name}/trace-events-all %{_mandir}/man1/qemu-trace-stap.1* # Fedora specific %{_bindir}/elf2dmp %files docs %doc %{qemudocdir} %files common -f %{name}.lang %license COPYING COPYING.LIB LICENSE %dir %{_datadir}/%{name}/ %{_datadir}/icons/* %{_datadir}/%{name}/keymaps/ %{_datadir}/%{name}/linuxboot_dma.bin %{_datadir}/%{name}/vhost-user/50-qemu-virtiofsd.json %attr(4755, -, -) %{_libexecdir}/qemu-bridge-helper %{_libexecdir}/virtiofsd %{_mandir}/man1/%{name}.1* %{_mandir}/man1/virtiofsd.1* %{_mandir}/man7/qemu-block-drivers.7* %{_mandir}/man7/qemu-cpu-models.7* %{_mandir}/man7/qemu-ga-ref.7* %{_mandir}/man7/qemu-qmp-ref.7* %dir %{_sysconfdir}/%{name} %config(noreplace) %{_sysconfdir}/%{name}/bridge.conf %if %{have_kvm} %config(noreplace) %{_sysconfdir}/modprobe.d/kvm.conf %config(noreplace) %{_sysconfdir}/modprobe.d/vhost.conf %endif %config(noreplace) %{_sysconfdir}/sasl2/%{name}.conf # Fedora specific %{_datadir}/applications/qemu.desktop %exclude %{_datadir}/%{name}/qemu-nsis.bmp %{_libexecdir}/virtfs-proxy-helper %{_mandir}/man1/virtfs-proxy-helper.1* %files tests %{testsdir} %{_libdir}/%{name}/accel-qtest-*.so %files block-curl %{_libdir}/%{name}/block-curl.so %files block-iscsi %{_libdir}/%{name}/block-iscsi.so %if %{have_block_rbd} %files block-rbd %{_libdir}/%{name}/block-rbd.so %endif %files block-ssh %{_libdir}/%{name}/block-ssh.so %if %{have_opengl} %files ui-opengl %{_libdir}/%{name}/ui-opengl.so %endif %files block-dmg %{_libdir}/%{name}/block-dmg-bz2.so %if %{have_block_gluster} %files block-gluster %{_libdir}/%{name}/block-gluster.so %endif %if %{have_block_nfs} %files block-nfs %{_libdir}/%{name}/block-nfs.so %endif %files audio-alsa %{_libdir}/%{name}/audio-alsa.so %files audio-oss %{_libdir}/%{name}/audio-oss.so %files audio-pa %{_libdir}/%{name}/audio-pa.so %files audio-sdl %{_libdir}/%{name}/audio-sdl.so %if %{have_jack} %files audio-jack %{_libdir}/%{name}/audio-jack.so %endif %files ui-curses %{_libdir}/%{name}/ui-curses.so %files ui-gtk %{_libdir}/%{name}/ui-gtk.so %files ui-sdl %{_libdir}/%{name}/ui-sdl.so %files ui-egl-headless %{_libdir}/%{name}/ui-egl-headless.so %files char-baum %{_libdir}/%{name}/chardev-baum.so %files device-display-virtio-gpu %{_libdir}/%{name}/hw-display-virtio-gpu.so %files device-display-virtio-gpu-gl %{_libdir}/%{name}/hw-display-virtio-gpu-gl.so %files device-display-virtio-gpu-pci %{_libdir}/%{name}/hw-display-virtio-gpu-pci.so %files device-display-virtio-gpu-pci-gl %{_libdir}/%{name}/hw-display-virtio-gpu-pci-gl.so %files device-display-virtio-gpu-ccw %{_libdir}/%{name}/hw-s390x-virtio-gpu-ccw.so %files device-display-virtio-vga %{_libdir}/%{name}/hw-display-virtio-vga.so %files device-display-virtio-vga-gl %{_libdir}/%{name}/hw-display-virtio-vga-gl.so %files device-usb-host %{_libdir}/%{name}/hw-usb-host.so %files device-usb-redirect %{_libdir}/%{name}/hw-usb-redirect.so %files device-usb-smartcard %{_libdir}/%{name}/hw-usb-smartcard.so %if %{have_virgl} %files device-display-vhost-user-gpu %{_datadir}/%{name}/vhost-user/50-qemu-gpu.json %{_libexecdir}/vhost-user-gpu %endif %if %{have_spice} %files audio-spice %{_libdir}/%{name}/audio-spice.so %files char-spice %{_libdir}/%{name}/chardev-spice.so %files device-display-qxl %{_libdir}/%{name}/hw-display-qxl.so %files ui-spice-core %{_libdir}/%{name}/ui-spice-core.so %files ui-spice-app %{_libdir}/%{name}/ui-spice-app.so %endif %if %{have_kvm} %files kvm # Deliberately empty %files kvm-core # Deliberately empty %endif %files user %{_bindir}/qemu-i386 %{_bindir}/qemu-x86_64 %{_bindir}/qemu-aarch64 %{_bindir}/qemu-aarch64_be %{_bindir}/qemu-alpha %{_bindir}/qemu-arm %{_bindir}/qemu-armeb %{_bindir}/qemu-cris %{_bindir}/qemu-hppa %{_bindir}/qemu-hexagon %{_bindir}/qemu-m68k %{_bindir}/qemu-microblaze %{_bindir}/qemu-microblazeel %{_bindir}/qemu-mips %{_bindir}/qemu-mipsel %{_bindir}/qemu-mips64 %{_bindir}/qemu-mips64el %{_bindir}/qemu-mipsn32 %{_bindir}/qemu-mipsn32el %{_bindir}/qemu-nios2 %{_bindir}/qemu-or1k %{_bindir}/qemu-ppc %{_bindir}/qemu-ppc64 %{_bindir}/qemu-ppc64le %{_bindir}/qemu-riscv32 %{_bindir}/qemu-riscv64 %{_bindir}/qemu-s390x %{_bindir}/qemu-sh4 %{_bindir}/qemu-sh4eb %{_bindir}/qemu-sparc %{_bindir}/qemu-sparc32plus %{_bindir}/qemu-sparc64 %{_bindir}/qemu-xtensa %{_bindir}/qemu-xtensaeb %{_datadir}/systemtap/tapset/qemu-i386*.stp %{_datadir}/systemtap/tapset/qemu-x86_64*.stp %{_datadir}/systemtap/tapset/qemu-aarch64*.stp %{_datadir}/systemtap/tapset/qemu-alpha*.stp %{_datadir}/systemtap/tapset/qemu-arm*.stp %{_datadir}/systemtap/tapset/qemu-cris*.stp %{_datadir}/systemtap/tapset/qemu-hppa*.stp %{_datadir}/systemtap/tapset/qemu-hexagon*.stp %{_datadir}/systemtap/tapset/qemu-m68k*.stp %{_datadir}/systemtap/tapset/qemu-microblaze*.stp %{_datadir}/systemtap/tapset/qemu-mips*.stp %{_datadir}/systemtap/tapset/qemu-nios2*.stp %{_datadir}/systemtap/tapset/qemu-or1k*.stp %{_datadir}/systemtap/tapset/qemu-ppc*.stp %{_datadir}/systemtap/tapset/qemu-riscv*.stp %{_datadir}/systemtap/tapset/qemu-s390x*.stp %{_datadir}/systemtap/tapset/qemu-sh4*.stp %{_datadir}/systemtap/tapset/qemu-sparc*.stp %{_datadir}/systemtap/tapset/qemu-xtensa*.stp %files user-binfmt %{_exec_prefix}/lib/binfmt.d/qemu-*-dynamic.conf %if %{user_static} %files user-static # Just use wildcard matches here: we will catch any new/missing files # in the qemu-user filelists %{_exec_prefix}/lib/binfmt.d/qemu-*-static.conf %{_bindir}/qemu-*-static %{_datadir}/systemtap/tapset/qemu-*-static.stp %endif %files system-aarch64 %files system-aarch64-core %{_bindir}/qemu-system-aarch64 %{_datadir}/systemtap/tapset/qemu-system-aarch64*.stp %{_mandir}/man1/qemu-system-aarch64.1* %files system-alpha %files system-alpha-core %{_bindir}/qemu-system-alpha %{_datadir}/systemtap/tapset/qemu-system-alpha*.stp %{_mandir}/man1/qemu-system-alpha.1* %{_datadir}/%{name}/palcode-clipper %files system-arm %files system-arm-core %{_bindir}/qemu-system-arm %{_datadir}/%{name}/npcm7xx_bootrom.bin %{_datadir}/systemtap/tapset/qemu-system-arm*.stp %{_mandir}/man1/qemu-system-arm.1* %files system-avr %files system-avr-core %{_bindir}/qemu-system-avr %{_datadir}/systemtap/tapset/qemu-system-avr*.stp %{_mandir}/man1/qemu-system-avr.1* %files system-cris %files system-cris-core %{_bindir}/qemu-system-cris %{_datadir}/systemtap/tapset/qemu-system-cris*.stp %{_mandir}/man1/qemu-system-cris.1* %files system-hppa %files system-hppa-core %{_bindir}/qemu-system-hppa %{_datadir}/systemtap/tapset/qemu-system-hppa*.stp %{_mandir}/man1/qemu-system-hppa.1* %{_datadir}/%{name}/hppa-firmware.img %files system-m68k %files system-m68k-core %{_bindir}/qemu-system-m68k %{_datadir}/systemtap/tapset/qemu-system-m68k*.stp %{_mandir}/man1/qemu-system-m68k.1* %files system-microblaze %files system-microblaze-core %{_bindir}/qemu-system-microblaze %{_bindir}/qemu-system-microblazeel %{_datadir}/systemtap/tapset/qemu-system-microblaze*.stp %{_mandir}/man1/qemu-system-microblaze.1* %{_mandir}/man1/qemu-system-microblazeel.1* %{_datadir}/%{name}/petalogix*.dtb %files system-mips %files system-mips-core %{_bindir}/qemu-system-mips %{_bindir}/qemu-system-mipsel %{_bindir}/qemu-system-mips64 %{_bindir}/qemu-system-mips64el %{_datadir}/systemtap/tapset/qemu-system-mips*.stp %{_mandir}/man1/qemu-system-mips.1* %{_mandir}/man1/qemu-system-mipsel.1* %{_mandir}/man1/qemu-system-mips64el.1* %{_mandir}/man1/qemu-system-mips64.1* %files system-nios2 %files system-nios2-core %{_bindir}/qemu-system-nios2 %{_datadir}/systemtap/tapset/qemu-system-nios2*.stp %{_mandir}/man1/qemu-system-nios2.1* %files system-or1k %files system-or1k-core %{_bindir}/qemu-system-or1k %{_datadir}/systemtap/tapset/qemu-system-or1k*.stp %{_mandir}/man1/qemu-system-or1k.1* %files system-ppc %files system-ppc-core %{_bindir}/qemu-system-ppc %{_bindir}/qemu-system-ppc64 %{_datadir}/systemtap/tapset/qemu-system-ppc*.stp %{_mandir}/man1/qemu-system-ppc.1* %{_mandir}/man1/qemu-system-ppc64.1* %{_datadir}/%{name}/bamboo.dtb %{_datadir}/%{name}/canyonlands.dtb %{_datadir}/%{name}/qemu_vga.ndrv %{_datadir}/%{name}/skiboot.lid %{_datadir}/%{name}/u-boot.e500 %{_datadir}/%{name}/u-boot-sam460-20100605.bin %if %{have_memlock_limits} %{_sysconfdir}/security/limits.d/95-kvm-memlock.conf %endif %files system-riscv %files system-riscv-core %{_bindir}/qemu-system-riscv32 %{_bindir}/qemu-system-riscv64 %{_datadir}/%{name}/opensbi-riscv*.bin %{_datadir}/%{name}/opensbi-riscv*.elf %{_datadir}/systemtap/tapset/qemu-system-riscv*.stp %{_mandir}/man1/qemu-system-riscv*.1* %files system-rx %files system-rx-core %{_bindir}/qemu-system-rx %{_datadir}/systemtap/tapset/qemu-system-rx*.stp %{_mandir}/man1/qemu-system-rx.1* %files system-s390x %files system-s390x-core %{_bindir}/qemu-system-s390x %{_datadir}/systemtap/tapset/qemu-system-s390x*.stp %{_mandir}/man1/qemu-system-s390x.1* %{_datadir}/%{name}/s390-ccw.img %{_datadir}/%{name}/s390-netboot.img %files system-sh4 %files system-sh4-core %{_bindir}/qemu-system-sh4 %{_bindir}/qemu-system-sh4eb %{_datadir}/systemtap/tapset/qemu-system-sh4*.stp %{_mandir}/man1/qemu-system-sh4.1* %{_mandir}/man1/qemu-system-sh4eb.1* %files system-sparc %files system-sparc-core %{_bindir}/qemu-system-sparc %{_bindir}/qemu-system-sparc64 %{_datadir}/systemtap/tapset/qemu-system-sparc*.stp %{_mandir}/man1/qemu-system-sparc.1* %{_mandir}/man1/qemu-system-sparc64.1* %{_datadir}/%{name}/QEMU,tcx.bin %{_datadir}/%{name}/QEMU,cgthree.bin %files system-tricore %files system-tricore-core %{_bindir}/qemu-system-tricore %{_datadir}/systemtap/tapset/qemu-system-tricore*.stp %{_mandir}/man1/qemu-system-tricore.1* %files system-x86 %files system-x86-core %{_bindir}/qemu-system-i386 %{_bindir}/qemu-system-x86_64 %{_libdir}/%{name}/accel-tcg-i386.so %{_libdir}/%{name}/accel-tcg-x86_64.so %{_datadir}/systemtap/tapset/qemu-system-i386*.stp %{_datadir}/systemtap/tapset/qemu-system-x86_64*.stp %{_mandir}/man1/qemu-system-i386.1* %{_mandir}/man1/qemu-system-x86_64.1* %{_datadir}/%{name}/kvmvapic.bin %{_datadir}/%{name}/linuxboot.bin %{_datadir}/%{name}/multiboot.bin %{_datadir}/%{name}/multiboot_dma.bin %{_datadir}/%{name}/pvh.bin %{_datadir}/%{name}/qboot.rom %if %{need_qemu_kvm} %{_bindir}/qemu-kvm %{_mandir}/man1/qemu-kvm.1* %endif %files system-xtensa %files system-xtensa-core %{_bindir}/qemu-system-xtensa %{_bindir}/qemu-system-xtensaeb %{_datadir}/systemtap/tapset/qemu-system-xtensa*.stp %{_mandir}/man1/qemu-system-xtensa.1* %{_mandir}/man1/qemu-system-xtensaeb.1* # endif !tools_only %endif %changelog * Thu Dec 09 2021 Eduardo Lima (Etrunko) - 6.2.0-0.1-rc4 - Rebase to qemu 6.2.0-rc4 * Fri Dec 03 2021 Eduardo Lima (Etrunko) - 6.2.0-0.1-rc3 - Rebase to qemu 6.2.0-rc3 * Thu Nov 25 2021 Daniel P. Berrangé - 6.1.0-13 - Fix iovec limits with scsi-generic * Wed Nov 24 2021 Richard W.M. Jones - 6.1.0-12 - Add support for qemu-nbd --selinux-relabel option (RHBZ#1984938) - Define STAP_SDT_ARG_CONSTRAINT=g on %%{arm}, workaround for: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=103395 * Mon Nov 08 2021 Adam Williamson - 6.1.0-10 - Fix snapshot creation with qxl graphics * Fri Oct 08 2021 Cole Robinson - 6.1.0-9 - Fix tcg PVH test with binutils 2.36+ * Wed Oct 06 2021 Cole Robinson - 6.1.0-8 - Fix qemu crash with vnc + libvirt virDomainOpenConsole * Sun Sep 12 2021 Richard W.M. Jones - 6.1.0-7 - Alternate fix for assertion on armv7hl (RHBZ#1999878) * Wed Sep 01 2021 Richard W.M. Jones - 6.1.0-6 - Fix assertion on armv7hl (RHBZ#1999878) * Tue Aug 31 2021 Richard W.M. Jones - 6.1.0-5 - Fix -cpu max (RHBZ#1999700) * Fri Aug 27 2021 Richard W.M. Jones - 6.1.0-4 - Disable gcrypt (for real this time). * Fri Aug 27 2021 Richard W.M. Jones - 6.1.0-3 - Revert "Disable gcrypt" which seems to disable gnutls (RHBZ#1998452) * Thu Aug 26 2021 Richard W.M. Jones - 6.1.0-2 - Fix dependency pci_gl -> pci-gl and vga_gl -> vga-gl (RHBZ#1997855) * Tue Aug 24 2021 Eduardo Lima (Etrunko) - 6.1.0-1 - Rebase to qemu 6.1.0 * Tue Aug 10 2021 Eduardo Lima (Etrunko) - 6.1.0-0.3-rc4 - Rebase to qemu 6.1.0-rc4 * Tue Aug 10 2021 Eduardo Lima (Etrunko) - 6.1.0-0.2-rc3 - Rebase to qemu 6.1.0-rc3 * Mon Aug 9 2021 Eduardo Lima (Etrunko) - 6.1.0-0.1-rc2 - Rebase to qemu 6.1.0-rc2 * Thu Jul 29 2021 Cole Robinson - 6.0.0-12 - Drop python3 shebang fixup for tests rpm - Parallelize make check - Explicitly disable c++ build * Fri Jul 23 2021 Richard W.M. Jones - 6.0.0-11 - Fix dependencies of qemu metapackage. * Fri Jul 23 2021 Fedora Release Engineering - 2:6.0.0-10.1 - Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild * Sun Jul 18 2021 Cole Robinson - 6.0.0-10 - Split out qemu-pr-helper and qemu-tools subpackages * Wed Jul 07 2021 Cole Robinson - 6.0.0-9 - Use standard fedora build macros - Access roms directly in ipxe, seabios, seavgabios directories * Wed Jun 30 2021 Cole Robinson - 6.0.0-8 - Relax meson version to fix building on older Fedora - More attempts to get CI working * Wed Jun 23 2021 Cole Robinson - 6.0.0-7 - Add qemu-tests package - Move qemu-sanity-check test to fedora CI - Add s390x and generic kvm modprobe file from RHEL - Add vhost modprobe file from RHEL - Distribute tracetool, simpletrace, dump-guest-memory tools * Wed Jun 16 2021 Cole Robinson - 6.0.0-6 - Build against fuse3 and SDL2_image - Move qemu-storage-daemon to qemu-img subpackage * Mon Jun 07 2021 Cole Robinson - 6.0.0-5 - Rebuild for xen 4.15 * Tue Jun 01 2021 Cole Robinson - 2:6.0.0-4 - Split out qemu-device-display-vhost-user-gpu subpackage - Split out qemu-docs subpackage * Wed May 19 2021 Paolo Bonzini - 2:6.0.0-3 - add another patch to fix configuration files * Wed May 19 2021 Paolo Bonzini - 2:6.0.0-2 - fix spice option from configuration file - fix object option from configuration file - allow not specifying size in -m when using -M memory-backend * Wed May 12 2021 Cole Robinson - 2:6.0.0-1 - Rebase to qemu 6.0.0 GA * Wed Apr 21 2021 Cole Robinson - 2:6.0.0-0.3.rc4 - Rebase to qemu 6.0.0-rc4 * Wed Apr 14 2021 Richard W.M. Jones - 2:6.0.0-0.2.rc2 - Rebuild for updated liburing. * Tue Apr 06 2021 Cole Robinson - 6.0.0-0.1.rc2 - Rebase to qemu 6.0.0-rc2 * Tue Mar 02 2021 Zbigniew Jędrzejewski-Szmek - 2:5.2.0-6.1 - Rebuilt for updated systemd-rpm-macros See https://pagure.io/fesco/issue/2583. * Mon Mar 01 2021 Cole Robinson - 5.2.0-6 - Fix building on centos stream in copr * Wed Jan 27 2021 Fedora Release Engineering - 2:5.2.0-5.1 - Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild * Mon Jan 11 2021 Paolo Bonzini - 2:5.2.0-5 - Use symlink for qemu-kvm. - Fix make check on bash 5.1. * Fri Dec 11 2020 Richard W.M. Jones - 2:5.2.0-4 - qemu-char-spice not qemu-chardev-spice. * Thu Dec 10 2020 Mohan Boddu - 5.2.0-2 - Fixing the ISA Dependencies * Wed Dec 09 2020 Cole Robinson - 5.2.0-1 - Rebase to qemu-5.2.0 GA - Fix spice and GL UI module deps (bz 1904603) * Thu Dec 03 2020 Richard W.M. Jones - 5.2.0-0.9.rc4 - Enable qemu-kvm-core package on riscv64. * Thu Dec 03 2020 Cole Robinson - 5.2.0-0.8.rc4 - Rebase to qemu-5.2.0-rc4 * Tue Nov 24 2020 Cole Robinson - 5.2.0-0.7.rc2 - Fix running 9p tests in copr * Thu Nov 19 2020 Paolo Bonzini - 5.2.0-0.6.rc2 - Remove --python=... to force use of system meson * Thu Nov 19 2020 Daniel P. Berrangé - 5.2.0-0.5.rc2 - Re-enable systemtap tracing * Wed Nov 18 2020 Cole Robinson - 5.2.0-0.4.rc2 - Rebase to qemu-5.2.0-rc2 * Fri Nov 13 2020 Daniel P. Berrangé - 5.2.0-0.3.rc1 - Disable user mode static builds in ELN * Wed Nov 11 2020 Cole Robinson - 5.2.0-0.2.rc1 - Rebase to qemu-5.2.0-rc1 * Sun Nov 08 2020 Cole Robinson - 5.2.0-0.1.rc0 - Rebase to qemu-5.2.0-rc0 * Thu Nov 5 2020 Daniel P. Berrangé - 5.1.0-7 - Disable LTO again. Tests were not passing, we were ignoring failures. * Mon Oct 26 2020 Daniel P. Berrangé - 5.1.0-6 - Re-enable LTO since tests now pass without asserts * Fri Sep 4 2020 Daniel P. Berrangé - 5.1.0-5 - Drop conditions for ppc, ppc64, mips64 and s390 arches - Fix host qemu binary path for aarch64 - Re-enable kernel BR for QEMU sanity check - Fix conditionals for enabling QEMU sanity check - Check whether emulator works before doing sanity check - Provide explicit kernel path for QEMU sanity check - Make QEMU sanity check a build blocker * Thu Sep 3 2020 Daniel P. Berrangé - 5.1.0-4 - Add btrfs ioctls to linux-user (rhbz #1872918) * Tue Aug 18 2020 Tom Stellard - 5.1.0-3 - Add BuildRequires: gcc - https://fedoraproject.org/wiki/Packaging:C_and_C%2B%2B#BuildRequires_and_Requires * Mon Aug 17 2020 Cole Robinson - 5.1.0-2 - Disable dtrace generation to fix use of modules (bz 1869339) * Tue Aug 11 2020 Cole Robinson - 5.1.0-1 - Update to version 5.1.0 * Fri Aug 07 2020 Cole Robinson - 5.1.0-0.3.rc3 - Update to version 5.1.0-rc3 * Thu Aug 06 2020 Merlin Mathesius - 5.1.0-0.2.rc2 - Use new %%{kernel_arches} macro to determine when a full kernel is available * Wed Aug 05 2020 Cole Robinson - 5.1.0-0.2.rc2 - Pull in new modules by default, like we do for others * Tue Aug 04 2020 Cole Robinson - 5.1.0-0.1.rc2 - Update to qemu 5.1.0 rc2 * Fri Jul 31 2020 Daniel P. Berrangé - 5.0.0-6 - Remove obsolete Fedora conditionals (PR#9) * Thu Jul 30 2020 Richard W.M. Jones - 5.0.0-5 - Disable LTO as it caused many strange assert failures. * Wed Jul 29 2020 Richard W.M. Jones - 5.0.0-4 - Backport Dan's upstream patch to fix insecure cert in test suite. * Mon Jul 27 2020 Kevin Fenzi - 5.0.0-3 - Rebuild for new xen * Wed May 13 2020 Cole Robinson - 5.0.0-2 - Fix iouring hang (bz #1823751) * Wed May 06 2020 Cole Robinson - 5.0.0-1 - Update to version 5.0.0 * Thu Apr 16 2020 Cole Robinson - 5.0.0-0.3.rc3 - Update to qemu 5.0.0 rc3 * Thu Apr 09 2020 Cole Robinson - 5.0.0-0.3.rc2 - Update to qemu 5.0.0 rc2 * Wed Apr 08 2020 Adam Williamson - 2:5.0.0-0.2.rc0 - Rebuild for new brltty * Wed Mar 25 2020 Cole Robinson - 2:5.0.0-0.1.rc0 - Update to qemu-5.0.0-rc0 * Tue Mar 17 2020 Fabiano Fidêncio - 2:4.2.0-7 - Fix segfault with SR-IOV hot-{plug,unplug} (bz #1814017) * Tue Feb 25 2020 Cole Robinson - 2:4.2.0-6 - Rebuild for libiscsi soname bump * Sat Feb 15 2020 Cole Robinson - 2:4.2.0-5 - Fix ppc shutdown issue (bz #1784961) * Tue Jan 28 2020 Cole Robinson - 2:4.2.0-4 - virtio-fs support * Sat Jan 25 2020 Richard W.M. Jones - 4.2.0-3 - Add miscellaneous fixes for RISC-V (RHBZ#1794902).