Warning: Permanently added '52.116.127.126' (ED25519) to the list of known hosts. INFO: Calling: curl -H Pragma: -o ffmulticonverter-1.8.0.tar.gz --location --connect-timeout 60 --retry 3 --retry-delay 10 --remote-time --show-error --fail --retry-all-errors https://copr-dist-git.fedorainfracloud.org/repo/pkgs/yselkowitz/ffmpeg-consumers-for-adoption/ffmulticonverter/ffmulticonverter-1.8.0.tar.gz/md5/61a8a57e81a516d6d2f1c48a9ef07aab/ffmulticonverter-1.8.0.tar.gz % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 345k 100 345k 0 0 9226k 0 --:--:-- --:--:-- --:--:-- 9331k INFO: Reading stdout from command: md5sum ffmulticonverter-1.8.0.tar.gz Running (timeout=18000): unbuffer mock --spec /var/lib/copr-rpmbuild/workspace/workdir-yee52_rt/ffmulticonverter/ffmulticonverter.spec --sources /var/lib/copr-rpmbuild/workspace/workdir-yee52_rt/ffmulticonverter --resultdir /var/lib/copr-rpmbuild/results --uniqueext 1720362566.222730 -r /var/lib/copr-rpmbuild/results/configs/child.cfg INFO: mock.py version 5.6 starting (python version = 3.12.1, NVR = mock-5.6-1.fc39), args: /usr/libexec/mock/mock --spec /var/lib/copr-rpmbuild/workspace/workdir-yee52_rt/ffmulticonverter/ffmulticonverter.spec --sources /var/lib/copr-rpmbuild/workspace/workdir-yee52_rt/ffmulticonverter --resultdir /var/lib/copr-rpmbuild/results --uniqueext 1720362566.222730 -r /var/lib/copr-rpmbuild/results/configs/child.cfg Start(bootstrap): init plugins INFO: tmpfs initialized INFO: selinux enabled INFO: chroot_scan: initialized INFO: compress_logs: initialized Finish(bootstrap): init plugins Start: init plugins INFO: tmpfs initialized INFO: selinux enabled INFO: chroot_scan: initialized INFO: compress_logs: initialized Finish: init plugins INFO: Signal handler active Start: run INFO: Start(/var/lib/copr-rpmbuild/workspace/workdir-yee52_rt/ffmulticonverter/ffmulticonverter.spec) Config(fedora-rawhide-s390x) Start: clean chroot Finish: clean chroot Mock Version: 5.6 INFO: Mock Version: 5.6 Start(bootstrap): chroot init INFO: mounting tmpfs at /var/lib/mock/fedora-rawhide-s390x-bootstrap-1720362566.222730/root. INFO: calling preinit hooks INFO: enabled root cache INFO: enabled package manager cache Start(bootstrap): cleaning package manager metadata Finish(bootstrap): cleaning package manager metadata INFO: Guessed host environment type: unknown INFO: Using bootstrap image: registry.fedoraproject.org/fedora:rawhide INFO: Pulling image: registry.fedoraproject.org/fedora:rawhide INFO: Copy content of container registry.fedoraproject.org/fedora:rawhide to /var/lib/mock/fedora-rawhide-s390x-bootstrap-1720362566.222730/root INFO: Checking that registry.fedoraproject.org/fedora:rawhide image matches host's architecture INFO: mounting registry.fedoraproject.org/fedora:rawhide with podman image mount INFO: image registry.fedoraproject.org/fedora:rawhide as /var/lib/containers/storage/overlay/47efd6912403f509b2f7cd6c7b9a7f84d55549f4331fe8bccb96e8051770960a/merged INFO: umounting image registry.fedoraproject.org/fedora:rawhide (/var/lib/containers/storage/overlay/47efd6912403f509b2f7cd6c7b9a7f84d55549f4331fe8bccb96e8051770960a/merged) with podman image umount INFO: Package manager dnf5 detected and used (fallback) INFO: Bootstrap image not marked ready Start(bootstrap): installing dnf5 tooling Updating and loading repositories: Copr repository 100% | 419.3 KiB/s | 18.0 KiB | 00m00s fedora 100% | 10.0 MiB/s | 19.3 MiB | 00m02s Repositories loaded. Package "dnf5-5.2.4.0-1.fc41.s390x" is already installed. Package "dnf5-plugins-5.2.4.0-1.fc41.s390x" is already installed. Nothing to do. Finish(bootstrap): installing dnf5 tooling Start(bootstrap): creating root cache Finish(bootstrap): creating root cache Finish(bootstrap): chroot init Start: chroot init INFO: mounting tmpfs at /var/lib/mock/fedora-rawhide-s390x-1720362566.222730/root. INFO: calling preinit hooks INFO: enabled root cache INFO: enabled package manager cache Start: cleaning package manager metadata Finish: cleaning package manager metadata INFO: enabled HW Info plugin INFO: Package manager dnf5 detected and used (direct choice) INFO: Buildroot is handled by package management downloaded with a bootstrap image: rpm-4.19.92-2.fc41.s390x rpm-sequoia-1.6.0-3.fc41.s390x dnf5-5.2.4.0-1.fc41.s390x dnf5-plugins-5.2.4.0-1.fc41.s390x Start: installing minimal buildroot with dnf5 Updating and loading repositories: fedora 100% | 1.6 MiB/s | 19.3 MiB | 00m12s Copr repository 100% | 3.6 KiB/s | 18.0 KiB | 00m05s Repositories loaded. Package Arch Version Repository Size Installing group/module packages: bash s390x 5.2.26-3.fc40 fedora 8.3 MiB bzip2 s390x 1.0.8-18.fc40 fedora 99.2 KiB coreutils s390x 9.5-3.fc41 fedora 6.0 MiB cpio s390x 2.15-1.fc40 fedora 1.1 MiB diffutils s390x 3.10-5.fc40 fedora 1.6 MiB fedora-release-common noarch 41-0.14 fedora 19.2 KiB findutils s390x 1:4.10.0-3.fc41 fedora 1.9 MiB gawk s390x 5.3.0-3.fc40 fedora 1.8 MiB glibc-minimal-langpack s390x 2.39.9000-30.fc41 fedora 0.0 B grep s390x 3.11-8.fc41 fedora 1.0 MiB gzip s390x 1.13-1.fc40 fedora 400.8 KiB info s390x 7.1-2.fc40 fedora 405.1 KiB patch s390x 2.7.6-24.fc40 fedora 298.3 KiB redhat-rpm-config noarch 293-1.fc41 fedora 183.5 KiB rpm-build s390x 4.19.92-2.fc41 fedora 196.4 KiB sed s390x 4.9-1.fc40 fedora 873.2 KiB shadow-utils s390x 2:4.15.1-5.fc41 fedora 4.2 MiB tar s390x 2:1.35-3.fc40 fedora 3.0 MiB unzip s390x 6.0-63.fc40 fedora 406.0 KiB util-linux s390x 2.40.2-1.fc41 fedora 3.7 MiB which s390x 2.21-41.fc40 fedora 83.9 KiB xz s390x 1:5.6.2-1.fc41 fedora 1.2 MiB Installing dependencies: add-determinism s390x 0.3.3-1.fc41 fedora 3.0 MiB alternatives s390x 1.28-1.fc41 fedora 66.1 KiB ansible-srpm-macros noarch 1-15.fc41 fedora 35.7 KiB audit-libs s390x 4.0.1-3.fc41 fedora 346.9 KiB authselect s390x 1.5.0-6.fc41 fedora 153.3 KiB authselect-libs s390x 1.5.0-6.fc41 fedora 819.6 KiB basesystem noarch 11-20.fc40 fedora 0.0 B binutils s390x 2.42.50-14.fc41 fedora 26.5 MiB build-reproducibility-srpm-macros noarch 0.3.3-1.fc41 fedora 735.0 B bzip2-libs s390x 1.0.8-18.fc40 fedora 88.5 KiB ca-certificates noarch 2024.2.68_v8.0.302-2.fc41 fedora 2.3 MiB coreutils-common s390x 9.5-3.fc41 fedora 11.2 MiB cracklib s390x 2.9.11-5.fc40 fedora 250.0 KiB crypto-policies noarch 20240628-1.gitddd11d3.fc41 fedora 123.4 KiB curl s390x 8.8.0-1.fc41 fedora 767.6 KiB cyrus-sasl-lib s390x 2.1.28-24.fc41 fedora 2.4 MiB debugedit s390x 5.0-16.fc41 fedora 202.8 KiB dwz s390x 0.15-6.fc40 fedora 318.6 KiB ed s390x 1.20.2-1.fc41 fedora 150.6 KiB efi-srpm-macros noarch 5-11.fc40 fedora 40.1 KiB elfutils s390x 0.191-7.fc41 fedora 3.0 MiB elfutils-debuginfod-client s390x 0.191-7.fc41 fedora 64.4 KiB elfutils-default-yama-scope noarch 0.191-7.fc41 fedora 1.8 KiB elfutils-libelf s390x 0.191-7.fc41 fedora 1.2 MiB elfutils-libs s390x 0.191-7.fc41 fedora 750.1 KiB fedora-gpg-keys noarch 41-0.2 fedora 124.7 KiB fedora-release noarch 41-0.14 fedora 0.0 B fedora-release-identity-basic noarch 41-0.14 fedora 694.0 B fedora-repos noarch 41-0.2 fedora 4.9 KiB fedora-repos-rawhide noarch 41-0.2 fedora 2.2 KiB file s390x 5.45-6.fc41 fedora 103.3 KiB file-libs s390x 5.45-6.fc41 fedora 9.9 MiB filesystem s390x 3.18-9.fc41 fedora 106.0 B fonts-srpm-macros noarch 1:2.0.5-16.fc41 fedora 55.8 KiB forge-srpm-macros noarch 0.3.1-1.fc41 fedora 39.0 KiB fpc-srpm-macros noarch 1.3-12.fc40 fedora 144.0 B gdb-minimal s390x 14.2-13.fc41 fedora 13.1 MiB gdbm s390x 1:1.23-6.fc40 fedora 483.9 KiB gdbm-libs s390x 1:1.23-6.fc40 fedora 133.4 KiB ghc-srpm-macros noarch 1.9.1-1.fc41 fedora 747.0 B glibc s390x 2.39.9000-30.fc41 fedora 5.2 MiB glibc-common s390x 2.39.9000-30.fc41 fedora 1.1 MiB glibc-gconv-extra s390x 2.39.9000-30.fc41 fedora 7.7 MiB gmp s390x 1:6.3.0-1.fc41 fedora 769.9 KiB gnat-srpm-macros noarch 6-5.fc40 fedora 1.0 KiB go-srpm-macros noarch 3.6.0-1.fc41 fedora 60.8 KiB jansson s390x 2.13.1-9.fc40 fedora 92.1 KiB kernel-srpm-macros noarch 1.0-23.fc41 fedora 1.9 KiB keyutils-libs s390x 1.6.3-3.fc40 fedora 54.2 KiB krb5-libs s390x 1.21.2-5.fc40 fedora 2.4 MiB libacl s390x 2.3.2-1.fc40 fedora 43.8 KiB libarchive s390x 3.7.4-2.fc41 fedora 1.0 MiB libattr s390x 2.5.2-3.fc40 fedora 28.3 KiB libblkid s390x 2.40.2-1.fc41 fedora 286.5 KiB libbrotli s390x 1.1.0-4.fc41 fedora 925.1 KiB libcap s390x 2.70-2.fc41 fedora 234.2 KiB libcap-ng s390x 0.8.5-2.fc41 fedora 76.7 KiB libcom_err s390x 1.47.1-1.fc41 fedora 67.0 KiB libcurl s390x 8.8.0-1.fc41 fedora 853.4 KiB libeconf s390x 0.6.2-2.fc41 fedora 61.8 KiB libevent s390x 2.1.12-13.fc41 fedora 938.7 KiB libfdisk s390x 2.40.2-1.fc41 fedora 394.8 KiB libffi s390x 3.4.6-1.fc41 fedora 65.9 KiB libgcc s390x 14.1.1-7.fc41 fedora 173.2 KiB libgomp s390x 14.1.1-7.fc41 fedora 531.2 KiB libidn2 s390x 2.3.7-1.fc40 fedora 332.9 KiB libmount s390x 2.40.2-1.fc41 fedora 375.8 KiB libnghttp2 s390x 1.62.1-1.fc41 fedora 178.0 KiB libnsl2 s390x 2.0.1-1.fc40 fedora 61.7 KiB libpkgconf s390x 2.1.1-1.fc41 fedora 85.9 KiB libpsl s390x 0.21.5-3.fc40 fedora 80.3 KiB libpwquality s390x 1.4.5-10.fc41 fedora 420.9 KiB libselinux s390x 3.7-1.fc41 fedora 188.9 KiB libsemanage s390x 3.7-1.fc41 fedora 301.3 KiB libsepol s390x 3.7-1.fc41 fedora 849.8 KiB libsmartcols s390x 2.40.2-1.fc41 fedora 192.2 KiB libssh s390x 0.10.6-6.fc41 fedora 529.1 KiB libssh-config noarch 0.10.6-6.fc41 fedora 277.0 B libstdc++ s390x 14.1.1-7.fc41 fedora 3.1 MiB libtasn1 s390x 4.19.0-6.fc40 fedora 187.5 KiB libtirpc s390x 1.3.4-1.rc3.fc41 fedora 214.6 KiB libtool-ltdl s390x 2.4.7-11.fc41 fedora 74.0 KiB libunistring s390x 1.1-7.fc41 fedora 1.8 MiB libutempter s390x 1.2.1-13.fc40 fedora 57.3 KiB libuuid s390x 2.40.2-1.fc41 fedora 37.3 KiB libverto s390x 0.3.2-8.fc40 fedora 29.2 KiB libxcrypt s390x 4.4.36-5.fc40 fedora 274.7 KiB libxml2 s390x 2.12.8-1.fc41 fedora 1.9 MiB libzstd s390x 1.5.6-1.fc41 fedora 879.7 KiB lua-libs s390x 5.4.6-5.fc40 fedora 324.8 KiB lua-srpm-macros noarch 1-13.fc40 fedora 1.3 KiB lz4-libs s390x 1.9.4-6.fc40 fedora 173.2 KiB mpfr s390x 4.2.1-4.fc41 fedora 698.7 KiB ncurses-base noarch 6.4-12.20240127.fc40 fedora 326.2 KiB ncurses-libs s390x 6.4-12.20240127.fc40 fedora 1.1 MiB ocaml-srpm-macros noarch 10-2.fc41 fedora 1.9 KiB openblas-srpm-macros noarch 2-17.fc41 fedora 112.0 B openldap s390x 2.6.8-3.fc41 fedora 675.7 KiB openssl-libs s390x 1:3.2.2-3.fc41 fedora 6.1 MiB p11-kit s390x 0.25.5-1.fc41 fedora 2.5 MiB p11-kit-trust s390x 0.25.5-1.fc41 fedora 475.2 KiB package-notes-srpm-macros noarch 0.5-11.fc40 fedora 1.6 KiB pam s390x 1.6.1-4.fc41 fedora 1.7 MiB pam-libs s390x 1.6.1-4.fc41 fedora 130.4 KiB pcre2 s390x 10.44-1.fc41 fedora 684.9 KiB pcre2-syntax noarch 10.44-1.fc41 fedora 251.6 KiB perl-srpm-macros noarch 1-55.fc41 fedora 861.0 B pkgconf s390x 2.1.1-1.fc41 fedora 86.6 KiB pkgconf-m4 noarch 2.1.1-1.fc41 fedora 13.9 KiB pkgconf-pkg-config s390x 2.1.1-1.fc41 fedora 988.0 B popt s390x 1.19-6.fc40 fedora 144.6 KiB publicsuffix-list-dafsa noarch 20240107-3.fc40 fedora 67.5 KiB pyproject-srpm-macros noarch 1.13.0-1.fc41 fedora 1.5 KiB python-srpm-macros noarch 3.13-2.fc41 fedora 51.0 KiB qt5-srpm-macros noarch 5.15.14-1.fc41 fedora 500.0 B qt6-srpm-macros noarch 6.7.2-1.fc41 fedora 456.0 B readline s390x 8.2-8.fc40 fedora 556.8 KiB rpm s390x 4.19.92-2.fc41 fedora 3.0 MiB rpm-build-libs s390x 4.19.92-2.fc41 fedora 218.4 KiB rpm-libs s390x 4.19.92-2.fc41 fedora 809.6 KiB rpm-sequoia s390x 1.6.0-3.fc41 fedora 2.9 MiB rust-srpm-macros noarch 26.3-1.fc41 fedora 4.8 KiB setup noarch 2.15.0-4.fc41 fedora 720.7 KiB sqlite-libs s390x 3.46.0-2.fc41 fedora 1.6 MiB systemd-libs s390x 256.1-8.fc41 fedora 2.1 MiB util-linux-core s390x 2.40.2-1.fc41 fedora 1.5 MiB xxhash-libs s390x 0.8.2-2.fc40 fedora 68.0 KiB xz-libs s390x 1:5.6.2-1.fc41 fedora 226.1 KiB zig-srpm-macros noarch 1-2.fc40 fedora 1.1 KiB zip s390x 3.0-40.fc40 fedora 754.2 KiB zlib-ng-compat s390x 2.1.7-1.fc41 fedora 113.3 KiB zstd s390x 1.5.6-1.fc41 fedora 1.8 MiB Installing groups: Buildsystem building group Transaction Summary: Installing: 154 packages Total size of inbound packages is 53 MiB. Need to download 53 MiB. After this operation 181 MiB will be used (install 181 MiB, remove 0 B). [ 1/154] bzip2-0:1.0.8-18.fc40.s390x 100% | 947.9 KiB/s | 53.1 KiB | 00m00s [ 2/154] cpio-0:2.15-1.fc40.s390x 100% | 6.9 MiB/s | 297.7 KiB | 00m00s [ 3/154] diffutils-0:3.10-5.fc40.s390x 100% | 14.7 MiB/s | 420.8 KiB | 00m00s [ 4/154] coreutils-0:9.5-3.fc41.s390x 100% | 8.9 MiB/s | 1.2 MiB | 00m00s [ 5/154] bash-0:5.2.26-3.fc40.s390x 100% | 13.9 MiB/s | 1.9 MiB | 00m00s [ 6/154] fedora-release-common-0:41-0. 100% | 1.6 MiB/s | 22.3 KiB | 00m00s [ 7/154] findutils-1:4.10.0-3.fc41.s39 100% | 30.3 MiB/s | 557.9 KiB | 00m00s [ 8/154] gawk-0:5.3.0-3.fc40.s390x 100% | 64.9 MiB/s | 1.1 MiB | 00m00s [ 9/154] glibc-minimal-langpack-0:2.39 100% | 8.5 MiB/s | 121.5 KiB | 00m00s [ 10/154] gzip-0:1.13-1.fc40.s390x 100% | 11.6 MiB/s | 177.8 KiB | 00m00s [ 11/154] grep-0:3.11-8.fc41.s390x 100% | 18.7 MiB/s | 306.2 KiB | 00m00s [ 12/154] info-0:7.1-2.fc40.s390x 100% | 13.6 MiB/s | 194.6 KiB | 00m00s [ 13/154] patch-0:2.7.6-24.fc40.s390x 100% | 9.2 MiB/s | 140.7 KiB | 00m00s [ 14/154] redhat-rpm-config-0:293-1.fc4 100% | 5.0 MiB/s | 82.0 KiB | 00m00s [ 15/154] rpm-build-0:4.19.92-2.fc41.s3 100% | 5.8 MiB/s | 83.7 KiB | 00m00s [ 16/154] sed-0:4.9-1.fc40.s390x 100% | 20.9 MiB/s | 320.8 KiB | 00m00s [ 17/154] unzip-0:6.0-63.fc40.s390x 100% | 12.7 MiB/s | 195.4 KiB | 00m00s [ 18/154] tar-2:1.35-3.fc40.s390x 100% | 30.7 MiB/s | 879.9 KiB | 00m00s [ 19/154] shadow-utils-2:4.15.1-5.fc41. 100% | 40.2 MiB/s | 1.3 MiB | 00m00s [ 20/154] which-0:2.21-41.fc40.s390x 100% | 3.0 MiB/s | 43.0 KiB | 00m00s [ 21/154] util-linux-0:2.40.2-1.fc41.s3 100% | 74.1 MiB/s | 1.2 MiB | 00m00s [ 22/154] xz-1:5.6.2-1.fc41.s390x 100% | 27.2 MiB/s | 473.1 KiB | 00m00s [ 23/154] filesystem-0:3.18-9.fc41.s390 100% | 72.4 MiB/s | 1.1 MiB | 00m00s [ 24/154] glibc-0:2.39.9000-30.fc41.s39 100% | 110.9 MiB/s | 1.9 MiB | 00m00s [ 25/154] ncurses-libs-0:6.4-12.2024012 100% | 22.1 MiB/s | 362.7 KiB | 00m00s [ 26/154] bzip2-libs-0:1.0.8-18.fc40.s3 100% | 3.2 MiB/s | 46.6 KiB | 00m00s [ 27/154] coreutils-common-0:9.5-3.fc41 100% | 117.9 MiB/s | 2.1 MiB | 00m00s [ 28/154] gmp-1:6.3.0-1.fc41.s390x 100% | 20.1 MiB/s | 328.7 KiB | 00m00s [ 29/154] libacl-0:2.3.2-1.fc40.s390x 100% | 1.9 MiB/s | 25.4 KiB | 00m00s [ 30/154] libattr-0:2.5.2-3.fc40.s390x 100% | 1.3 MiB/s | 18.4 KiB | 00m00s [ 31/154] libcap-0:2.70-2.fc41.s390x 100% | 5.4 MiB/s | 88.8 KiB | 00m00s [ 32/154] libselinux-0:3.7-1.fc41.s390x 100% | 6.4 MiB/s | 91.2 KiB | 00m00s [ 33/154] openssl-libs-1:3.2.2-3.fc41.s 100% | 113.7 MiB/s | 2.0 MiB | 00m00s [ 34/154] mpfr-0:4.2.1-4.fc41.s390x 100% | 20.8 MiB/s | 298.2 KiB | 00m00s [ 35/154] fedora-repos-0:41-0.2.noarch 100% | 583.1 KiB/s | 9.3 KiB | 00m00s [ 36/154] readline-0:8.2-8.fc40.s390x 100% | 15.0 MiB/s | 230.1 KiB | 00m00s [ 37/154] glibc-common-0:2.39.9000-30.f 100% | 29.7 MiB/s | 425.1 KiB | 00m00s [ 38/154] pcre2-0:10.44-1.fc41.s390x 100% | 15.9 MiB/s | 260.7 KiB | 00m00s [ 39/154] ed-0:1.20.2-1.fc41.s390x 100% | 5.8 MiB/s | 83.4 KiB | 00m00s [ 40/154] ansible-srpm-macros-0:1-15.fc 100% | 1.6 MiB/s | 20.9 KiB | 00m00s [ 41/154] build-reproducibility-srpm-ma 100% | 639.6 KiB/s | 10.2 KiB | 00m00s [ 42/154] efi-srpm-macros-0:5-11.fc40.n 100% | 1.6 MiB/s | 22.3 KiB | 00m00s [ 43/154] dwz-0:0.15-6.fc40.s390x 100% | 10.1 MiB/s | 144.7 KiB | 00m00s [ 44/154] file-0:5.45-6.fc41.s390x 100% | 3.0 MiB/s | 49.2 KiB | 00m00s [ 45/154] fonts-srpm-macros-1:2.0.5-16. 100% | 2.0 MiB/s | 26.9 KiB | 00m00s [ 46/154] forge-srpm-macros-0:0.3.1-1.f 100% | 1.4 MiB/s | 19.4 KiB | 00m00s [ 47/154] fpc-srpm-macros-0:1.3-12.fc40 100% | 489.6 KiB/s | 7.8 KiB | 00m00s [ 48/154] ghc-srpm-macros-0:1.9.1-1.fc4 100% | 689.9 KiB/s | 9.0 KiB | 00m00s [ 49/154] gnat-srpm-macros-0:6-5.fc40.n 100% | 630.2 KiB/s | 8.8 KiB | 00m00s [ 50/154] go-srpm-macros-0:3.6.0-1.fc41 100% | 1.7 MiB/s | 27.9 KiB | 00m00s [ 51/154] kernel-srpm-macros-0:1.0-23.f 100% | 751.1 KiB/s | 9.8 KiB | 00m00s [ 52/154] lua-srpm-macros-0:1-13.fc40.n 100% | 623.6 KiB/s | 8.7 KiB | 00m00s [ 53/154] openblas-srpm-macros-0:2-17.f 100% | 547.2 KiB/s | 7.7 KiB | 00m00s [ 54/154] ocaml-srpm-macros-0:10-2.fc41 100% | 569.4 KiB/s | 9.1 KiB | 00m00s [ 55/154] package-notes-srpm-macros-0:0 100% | 710.3 KiB/s | 9.9 KiB | 00m00s [ 56/154] perl-srpm-macros-0:1-55.fc41. 100% | 598.1 KiB/s | 8.4 KiB | 00m00s [ 57/154] pyproject-srpm-macros-0:1.13. 100% | 809.5 KiB/s | 13.0 KiB | 00m00s [ 58/154] python-srpm-macros-0:3.13-2.f 100% | 1.7 MiB/s | 23.8 KiB | 00m00s [ 59/154] qt5-srpm-macros-0:5.15.14-1.f 100% | 633.0 KiB/s | 8.9 KiB | 00m00s [ 60/154] rpm-0:4.19.92-2.fc41.s390x 100% | 35.9 MiB/s | 551.1 KiB | 00m00s [ 61/154] qt6-srpm-macros-0:6.7.2-1.fc4 100% | 558.7 KiB/s | 8.9 KiB | 00m00s [ 62/154] rust-srpm-macros-0:26.3-1.fc4 100% | 893.1 KiB/s | 12.5 KiB | 00m00s [ 63/154] zig-srpm-macros-0:1-2.fc40.no 100% | 574.2 KiB/s | 8.0 KiB | 00m00s [ 64/154] zip-0:3.0-40.fc40.s390x 100% | 17.3 MiB/s | 282.8 KiB | 00m00s [ 65/154] debugedit-0:5.0-16.fc41.s390x 100% | 5.7 MiB/s | 82.4 KiB | 00m00s [ 66/154] elfutils-0:0.191-7.fc41.s390x 100% | 33.7 MiB/s | 587.2 KiB | 00m00s [ 67/154] elfutils-libelf-0:0.191-7.fc4 100% | 14.0 MiB/s | 214.3 KiB | 00m00s [ 68/154] binutils-0:2.42.50-14.fc41.s3 100% | 128.8 MiB/s | 6.1 MiB | 00m00s [ 69/154] libarchive-0:3.7.4-2.fc41.s39 100% | 20.6 MiB/s | 442.2 KiB | 00m00s [ 70/154] pkgconf-pkg-config-0:2.1.1-1. 100% | 699.3 KiB/s | 9.8 KiB | 00m00s [ 71/154] popt-0:1.19-6.fc40.s390x 100% | 4.8 MiB/s | 69.5 KiB | 00m00s [ 72/154] rpm-build-libs-0:4.19.92-2.fc 100% | 6.2 MiB/s | 101.0 KiB | 00m00s [ 73/154] rpm-libs-0:4.19.92-2.fc41.s39 100% | 21.1 MiB/s | 324.5 KiB | 00m00s [ 74/154] zstd-0:1.5.6-1.fc41.s390x 100% | 36.0 MiB/s | 515.8 KiB | 00m00s [ 75/154] audit-libs-0:4.0.1-3.fc41.s39 100% | 7.8 MiB/s | 127.9 KiB | 00m00s [ 76/154] libeconf-0:0.6.2-2.fc41.s390x 100% | 2.4 MiB/s | 33.9 KiB | 00m00s [ 77/154] libsemanage-0:3.7-1.fc41.s390 100% | 8.3 MiB/s | 119.0 KiB | 00m00s [ 78/154] pam-libs-0:1.6.1-4.fc41.s390x 100% | 4.1 MiB/s | 58.3 KiB | 00m00s [ 79/154] libxcrypt-0:4.4.36-5.fc40.s39 100% | 7.6 MiB/s | 123.8 KiB | 00m00s [ 80/154] setup-0:2.15.0-4.fc41.noarch 100% | 10.8 MiB/s | 154.6 KiB | 00m00s [ 81/154] authselect-libs-0:1.5.0-6.fc4 100% | 14.1 MiB/s | 217.1 KiB | 00m00s [ 82/154] libblkid-0:2.40.2-1.fc41.s390 100% | 8.0 MiB/s | 130.4 KiB | 00m00s [ 83/154] libcap-ng-0:0.8.5-2.fc41.s390 100% | 2.3 MiB/s | 33.1 KiB | 00m00s [ 84/154] libfdisk-0:2.40.2-1.fc41.s390 100% | 10.8 MiB/s | 165.2 KiB | 00m00s [ 85/154] libmount-0:2.40.2-1.fc41.s390 100% | 9.7 MiB/s | 159.3 KiB | 00m00s [ 86/154] libsmartcols-0:2.40.2-1.fc41. 100% | 6.0 MiB/s | 85.8 KiB | 00m00s [ 87/154] libutempter-0:1.2.1-13.fc40.s 100% | 1.8 MiB/s | 26.2 KiB | 00m00s [ 88/154] libuuid-0:2.40.2-1.fc41.s390x 100% | 1.8 MiB/s | 29.0 KiB | 00m00s [ 89/154] pam-0:1.6.1-4.fc41.s390x 100% | 36.6 MiB/s | 562.3 KiB | 00m00s [ 90/154] systemd-libs-0:256.1-8.fc41.s 100% | 48.4 MiB/s | 743.5 KiB | 00m00s [ 91/154] zlib-ng-compat-0:2.1.7-1.fc41 100% | 4.6 MiB/s | 65.8 KiB | 00m00s [ 92/154] util-linux-core-0:2.40.2-1.fc 100% | 31.2 MiB/s | 543.0 KiB | 00m00s [ 93/154] xz-libs-1:5.6.2-1.fc41.s390x 100% | 8.2 MiB/s | 117.7 KiB | 00m00s [ 94/154] glibc-gconv-extra-0:2.39.9000 100% | 100.6 MiB/s | 1.7 MiB | 00m00s [ 95/154] basesystem-0:11-20.fc40.noarc 100% | 449.3 KiB/s | 7.2 KiB | 00m00s [ 96/154] libgcc-0:14.1.1-7.fc41.s390x 100% | 6.1 MiB/s | 87.6 KiB | 00m00s [ 97/154] ncurses-base-0:6.4-12.2024012 100% | 6.2 MiB/s | 88.9 KiB | 00m00s [ 98/154] libsepol-0:3.7-1.fc41.s390x 100% | 21.2 MiB/s | 347.6 KiB | 00m00s [ 99/154] ca-certificates-0:2024.2.68_v 100% | 53.7 MiB/s | 879.1 KiB | 00m00s [100/154] crypto-policies-0:20240628-1. 100% | 6.3 MiB/s | 90.8 KiB | 00m00s [101/154] fedora-gpg-keys-0:41-0.2.noar 100% | 8.0 MiB/s | 131.8 KiB | 00m00s [102/154] fedora-repos-rawhide-0:41-0.2 100% | 636.1 KiB/s | 8.9 KiB | 00m00s [103/154] pcre2-syntax-0:10.44-1.fc41.n 100% | 10.4 MiB/s | 149.8 KiB | 00m00s [104/154] add-determinism-0:0.3.3-1.fc4 100% | 58.6 MiB/s | 1.0 MiB | 00m00s [105/154] file-libs-0:5.45-6.fc41.s390x 100% | 46.9 MiB/s | 768.8 KiB | 00m00s [106/154] curl-0:8.8.0-1.fc41.s390x 100% | 21.3 MiB/s | 305.6 KiB | 00m00s [107/154] alternatives-0:1.28-1.fc41.s3 100% | 2.6 MiB/s | 42.0 KiB | 00m00s [108/154] elfutils-debuginfod-client-0: 100% | 2.7 MiB/s | 38.6 KiB | 00m00s [109/154] jansson-0:2.13.1-9.fc40.s390x 100% | 3.1 MiB/s | 44.6 KiB | 00m00s [110/154] libstdc++-0:14.1.1-7.fc41.s39 100% | 60.4 MiB/s | 989.0 KiB | 00m00s [111/154] elfutils-libs-0:0.191-7.fc41. 100% | 16.2 MiB/s | 281.6 KiB | 00m00s [112/154] libzstd-0:1.5.6-1.fc41.s390x 100% | 22.5 MiB/s | 345.5 KiB | 00m00s [113/154] libxml2-0:2.12.8-1.fc41.s390x 100% | 46.0 MiB/s | 706.1 KiB | 00m00s [114/154] lz4-libs-0:1.9.4-6.fc40.s390x 100% | 5.4 MiB/s | 83.2 KiB | 00m00s [115/154] pkgconf-0:2.1.1-1.fc41.s390x 100% | 2.7 MiB/s | 44.4 KiB | 00m00s [116/154] libgomp-0:14.1.1-7.fc41.s390x 100% | 24.7 MiB/s | 354.4 KiB | 00m00s [117/154] pkgconf-m4-0:2.1.1-1.fc41.noa 100% | 1.0 MiB/s | 14.1 KiB | 00m00s [118/154] lua-libs-0:5.4.6-5.fc40.s390x 100% | 8.7 MiB/s | 142.6 KiB | 00m00s [119/154] rpm-sequoia-0:1.6.0-3.fc41.s3 100% | 63.2 MiB/s | 970.8 KiB | 00m00s [120/154] sqlite-libs-0:3.46.0-2.fc41.s 100% | 46.8 MiB/s | 766.1 KiB | 00m00s [121/154] authselect-0:1.5.0-6.fc41.s39 100% | 8.9 MiB/s | 145.2 KiB | 00m00s [122/154] gdbm-1:1.23-6.fc40.s390x 100% | 10.9 MiB/s | 156.6 KiB | 00m00s [123/154] gdbm-libs-1:1.23-6.fc40.s390x 100% | 4.0 MiB/s | 58.0 KiB | 00m00s [124/154] libnsl2-0:2.0.1-1.fc40.s390x 100% | 1.8 MiB/s | 29.4 KiB | 00m00s [125/154] libpwquality-0:1.4.5-10.fc41. 100% | 8.4 MiB/s | 119.8 KiB | 00m00s [126/154] libtirpc-0:1.3.4-1.rc3.fc41.s 100% | 6.6 MiB/s | 95.0 KiB | 00m00s [127/154] p11-kit-0:0.25.5-1.fc41.s390x 100% | 30.6 MiB/s | 532.6 KiB | 00m00s [128/154] p11-kit-trust-0:0.25.5-1.fc41 100% | 10.0 MiB/s | 143.0 KiB | 00m00s [129/154] elfutils-default-yama-scope-0 100% | 953.5 KiB/s | 13.3 KiB | 00m00s [130/154] libpkgconf-0:2.1.1-1.fc41.s39 100% | 2.4 MiB/s | 38.6 KiB | 00m00s [131/154] cracklib-0:2.9.11-5.fc40.s390 100% | 6.6 MiB/s | 94.4 KiB | 00m00s [132/154] krb5-libs-0:1.21.2-5.fc40.s39 100% | 47.9 MiB/s | 785.3 KiB | 00m00s [133/154] libcom_err-0:1.47.1-1.fc41.s3 100% | 1.6 MiB/s | 26.2 KiB | 00m00s [134/154] libffi-0:3.4.6-1.fc41.s390x 100% | 2.5 MiB/s | 36.0 KiB | 00m00s [135/154] libtasn1-0:4.19.0-6.fc40.s390 100% | 5.4 MiB/s | 77.8 KiB | 00m00s [136/154] libverto-0:0.3.2-8.fc40.s390x 100% | 1.5 MiB/s | 20.8 KiB | 00m00s [137/154] keyutils-libs-0:1.6.3-3.fc40. 100% | 1.9 MiB/s | 31.4 KiB | 00m00s [138/154] fedora-release-0:41-0.14.noar 100% | 821.8 KiB/s | 11.5 KiB | 00m00s [139/154] xxhash-libs-0:0.8.2-2.fc40.s3 100% | 2.2 MiB/s | 36.3 KiB | 00m00s [140/154] fedora-release-identity-basic 100% | 878.3 KiB/s | 12.3 KiB | 00m00s [141/154] gdb-minimal-0:14.2-13.fc41.s3 100% | 134.1 MiB/s | 4.3 MiB | 00m00s [142/154] libcurl-0:8.8.0-1.fc41.s390x 100% | 22.8 MiB/s | 374.0 KiB | 00m00s [143/154] libbrotli-0:1.1.0-4.fc41.s390 100% | 25.0 MiB/s | 384.1 KiB | 00m00s [144/154] libidn2-0:2.3.7-1.fc40.s390x 100% | 8.3 MiB/s | 119.6 KiB | 00m00s [145/154] libpsl-0:0.21.5-3.fc40.s390x 100% | 4.5 MiB/s | 64.4 KiB | 00m00s [146/154] libnghttp2-0:1.62.1-1.fc41.s3 100% | 4.9 MiB/s | 80.0 KiB | 00m00s [147/154] libssh-0:0.10.6-6.fc41.s390x 100% | 14.7 MiB/s | 210.6 KiB | 00m00s [148/154] openldap-0:2.6.8-3.fc41.s390x 100% | 17.1 MiB/s | 262.5 KiB | 00m00s [149/154] libunistring-0:1.1-7.fc41.s39 100% | 32.2 MiB/s | 560.1 KiB | 00m00s [150/154] publicsuffix-list-dafsa-0:202 100% | 4.1 MiB/s | 58.1 KiB | 00m00s [151/154] libssh-config-0:0.10.6-6.fc41 100% | 652.6 KiB/s | 9.1 KiB | 00m00s [152/154] cyrus-sasl-lib-0:2.1.28-24.fc 100% | 47.5 MiB/s | 827.2 KiB | 00m00s [153/154] libevent-0:2.1.12-13.fc41.s39 100% | 18.1 MiB/s | 259.9 KiB | 00m00s [154/154] libtool-ltdl-0:2.4.7-11.fc41. 100% | 2.5 MiB/s | 36.5 KiB | 00m00s -------------------------------------------------------------------------------- [154/154] Total 100% | 52.2 MiB/s | 53.4 MiB | 00m01s Running transaction Importing PGP key 0xE99D6AD1: Userid : "Fedora (41) " Fingerprint: 466CF2D8B60BC3057AA9453ED0622462E99D6AD1 From : file:///usr/share/distribution-gpg-keys/fedora/RPM-GPG-KEY-fedora-41-primary The key was successfully imported. Importing PGP key 0xE99D6AD1: Userid : "Fedora (41) " Fingerprint: 466CF2D8B60BC3057AA9453ED0622462E99D6AD1 From : file:///usr/share/distribution-gpg-keys/fedora/RPM-GPG-KEY-fedora-41-primary The key was successfully imported. Importing PGP key 0xA15B79CC: Userid : "Fedora (40) " Fingerprint: 115DF9AEF857853EE8445D0A0727707EA15B79CC From : file:///usr/share/distribution-gpg-keys/fedora/RPM-GPG-KEY-fedora-40-primary The key was successfully imported. [ 1/156] Verify package files 100% | 463.0 B/s | 154.0 B | 00m00s >>> Running pre-transaction scriptlet: filesystem-0:3.18-9.fc41.s390x >>> Stop pre-transaction scriptlet: filesystem-0:3.18-9.fc41.s390x [ 2/156] Prepare transaction 100% | 1.9 KiB/s | 154.0 B | 00m00s [ 3/156] Installing libgcc-0:14.1.1-7. 100% | 56.9 MiB/s | 174.9 KiB | 00m00s >>> Running post-install scriptlet: libgcc-0:14.1.1-7.fc41.s390x >>> Stop post-install scriptlet: libgcc-0:14.1.1-7.fc41.s390x [ 4/156] Installing crypto-policies-0: 100% | 21.0 MiB/s | 150.4 KiB | 00m00s >>> Running post-install scriptlet: crypto-policies-0:20240628-1.gitddd11d3.fc41 >>> Stop post-install scriptlet: crypto-policies-0:20240628-1.gitddd11d3.fc41.no [ 5/156] Installing libssh-config-0:0. 100% | 796.9 KiB/s | 816.0 B | 00m00s [ 6/156] Installing publicsuffix-list- 100% | 66.7 MiB/s | 68.3 KiB | 00m00s [ 7/156] Installing fedora-release-ide 100% | 929.7 KiB/s | 952.0 B | 00m00s [ 8/156] Installing fedora-repos-rawhi 100% | 2.4 MiB/s | 2.4 KiB | 00m00s [ 9/156] Installing fedora-gpg-keys-0: 100% | 23.7 MiB/s | 169.7 KiB | 00m00s [ 10/156] Installing fedora-repos-0:41- 100% | 5.6 MiB/s | 5.7 KiB | 00m00s [ 11/156] Installing fedora-release-com 100% | 11.5 MiB/s | 23.5 KiB | 00m00s [ 12/156] Installing fedora-release-0:4 100% | 121.1 KiB/s | 124.0 B | 00m00s [ 13/156] Installing setup-0:2.15.0-4.f 100% | 30.8 MiB/s | 726.1 KiB | 00m00s >>> Running post-install scriptlet: setup-0:2.15.0-4.fc41.noarch >>> Stop post-install scriptlet: setup-0:2.15.0-4.fc41.noarch [ 14/156] Installing filesystem-0:3.18- 100% | 2.0 MiB/s | 212.5 KiB | 00m00s [ 15/156] Installing basesystem-0:11-20 100% | 0.0 B/s | 124.0 B | 00m00s [ 16/156] Installing pkgconf-m4-0:2.1.1 100% | 14.0 MiB/s | 14.3 KiB | 00m00s [ 17/156] Installing pcre2-syntax-0:10. 100% | 82.7 MiB/s | 254.1 KiB | 00m00s [ 18/156] Installing ncurses-base-0:6.4 100% | 49.1 MiB/s | 351.6 KiB | 00m00s [ 19/156] Installing glibc-minimal-lang 100% | 121.1 KiB/s | 124.0 B | 00m00s [ 20/156] Installing ncurses-libs-0:6.4 100% | 106.2 MiB/s | 1.1 MiB | 00m00s >>> Running pre-install scriptlet: glibc-0:2.39.9000-30.fc41.s390x >>> Stop pre-install scriptlet: glibc-0:2.39.9000-30.fc41.s390x warning: posix.fork(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead warning: posix.wait(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead warning: posix.exec(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead warning: posix.fork(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead warning: posix.wait(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead warning: posix.exec(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead [ 21/156] Installing glibc-0:2.39.9000- 100% | 107.2 MiB/s | 5.3 MiB | 00m00s >>> Running post-install scriptlet: glibc-0:2.39.9000-30.fc41.s390x >>> Stop post-install scriptlet: glibc-0:2.39.9000-30.fc41.s390x [ 22/156] Installing bash-0:5.2.26-3.fc 100% | 181.7 MiB/s | 8.4 MiB | 00m00s >>> Running post-install scriptlet: bash-0:5.2.26-3.fc40.s390x >>> Stop post-install scriptlet: bash-0:5.2.26-3.fc40.s390x [ 23/156] Installing glibc-common-0:2.3 100% | 92.6 MiB/s | 1.1 MiB | 00m00s warning: posix.fork(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead warning: posix.wait(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead warning: posix.exec(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead [ 24/156] Installing glibc-gconv-extra- 100% | 137.0 MiB/s | 7.8 MiB | 00m00s >>> Running post-install scriptlet: glibc-gconv-extra-0:2.39.9000-30.fc41.s390x >>> Stop post-install scriptlet: glibc-gconv-extra-0:2.39.9000-30.fc41.s390x [ 25/156] Installing zlib-ng-compat-0:2 100% | 55.7 MiB/s | 114.1 KiB | 00m00s [ 26/156] Installing bzip2-libs-0:1.0.8 100% | 87.5 MiB/s | 89.6 KiB | 00m00s [ 27/156] Installing xz-libs-1:5.6.2-1. 100% | 111.0 MiB/s | 227.2 KiB | 00m00s [ 28/156] Installing readline-0:8.2-8.f 100% | 109.2 MiB/s | 558.9 KiB | 00m00s [ 29/156] Installing popt-0:1.19-6.fc40 100% | 36.9 MiB/s | 151.3 KiB | 00m00s [ 30/156] Installing libuuid-0:2.40.2-1 100% | 37.3 MiB/s | 38.2 KiB | 00m00s [ 31/156] Installing libblkid-0:2.40.2- 100% | 93.6 MiB/s | 287.6 KiB | 00m00s [ 32/156] Installing gmp-1:6.3.0-1.fc41 100% | 125.7 MiB/s | 772.2 KiB | 00m00s [ 33/156] Installing libattr-0:2.5.2-3. 100% | 28.6 MiB/s | 29.3 KiB | 00m00s [ 34/156] Installing libacl-0:2.3.2-1.f 100% | 43.6 MiB/s | 44.6 KiB | 00m00s [ 35/156] Installing libxcrypt-0:4.4.36 100% | 90.3 MiB/s | 277.4 KiB | 00m00s [ 36/156] Installing libstdc++-0:14.1.1 100% | 164.4 MiB/s | 3.1 MiB | 00m00s [ 37/156] Installing libzstd-0:1.5.6-1. 100% | 143.4 MiB/s | 881.0 KiB | 00m00s [ 38/156] Installing elfutils-libelf-0: 100% | 168.7 MiB/s | 1.2 MiB | 00m00s [ 39/156] Installing libeconf-0:0.6.2-2 100% | 31.0 MiB/s | 63.5 KiB | 00m00s [ 40/156] Installing gdbm-libs-1:1.23-6 100% | 66.0 MiB/s | 135.1 KiB | 00m00s [ 41/156] Installing dwz-0:0.15-6.fc40. 100% | 104.2 MiB/s | 320.0 KiB | 00m00s [ 42/156] Installing mpfr-0:4.2.1-4.fc4 100% | 114.0 MiB/s | 700.4 KiB | 00m00s [ 43/156] Installing gawk-0:5.3.0-3.fc4 100% | 139.6 MiB/s | 1.8 MiB | 00m00s [ 44/156] Installing unzip-0:6.0-63.fc4 100% | 100.0 MiB/s | 409.5 KiB | 00m00s [ 45/156] Installing file-libs-0:5.45-6 100% | 320.8 MiB/s | 9.9 MiB | 00m00s [ 46/156] Installing file-0:5.45-6.fc41 100% | 51.1 MiB/s | 104.7 KiB | 00m00s [ 47/156] Installing pcre2-0:10.44-1.fc 100% | 134.1 MiB/s | 686.3 KiB | 00m00s [ 48/156] Installing grep-0:3.11-8.fc41 100% | 113.2 MiB/s | 1.0 MiB | 00m00s [ 49/156] Installing xz-1:5.6.2-1.fc41. 100% | 120.8 MiB/s | 1.2 MiB | 00m00s [ 50/156] Installing libcap-ng-0:0.8.5- 100% | 76.7 MiB/s | 78.6 KiB | 00m00s [ 51/156] Installing audit-libs-0:4.0.1 100% | 113.6 MiB/s | 349.1 KiB | 00m00s [ 52/156] Installing pam-libs-0:1.6.1-4 100% | 43.2 MiB/s | 132.8 KiB | 00m00s [ 53/156] Installing libcap-0:2.70-2.fc 100% | 58.4 MiB/s | 239.2 KiB | 00m00s [ 54/156] Installing systemd-libs-0:256 100% | 148.2 MiB/s | 2.1 MiB | 00m00s [ 55/156] Installing libsmartcols-0:2.4 100% | 94.4 MiB/s | 193.4 KiB | 00m00s [ 56/156] Installing libsepol-0:3.7-1.f 100% | 138.5 MiB/s | 850.7 KiB | 00m00s [ 57/156] Installing libselinux-0:3.7-1 100% | 61.9 MiB/s | 190.1 KiB | 00m00s [ 58/156] Installing sed-0:4.9-1.fc40.s 100% | 107.6 MiB/s | 881.4 KiB | 00m00s [ 59/156] Installing findutils-1:4.10.0 100% | 157.7 MiB/s | 1.9 MiB | 00m00s [ 60/156] Installing libmount-0:2.40.2- 100% | 122.7 MiB/s | 376.9 KiB | 00m00s [ 61/156] Installing alternatives-0:1.2 100% | 33.1 MiB/s | 67.8 KiB | 00m00s [ 62/156] Installing lz4-libs-0:1.9.4-6 100% | 85.1 MiB/s | 174.3 KiB | 00m00s [ 63/156] Installing lua-libs-0:5.4.6-5 100% | 106.1 MiB/s | 326.0 KiB | 00m00s [ 64/156] Installing libcom_err-0:1.47. 100% | 66.5 MiB/s | 68.1 KiB | 00m00s [ 65/156] Installing libtasn1-0:4.19.0- 100% | 61.6 MiB/s | 189.3 KiB | 00m00s [ 66/156] Installing libunistring-0:1.1 100% | 147.8 MiB/s | 1.8 MiB | 00m00s [ 67/156] Installing libidn2-0:2.3.7-1. 100% | 66.2 MiB/s | 338.9 KiB | 00m00s [ 68/156] Installing libpsl-0:0.21.5-3. 100% | 39.8 MiB/s | 81.4 KiB | 00m00s [ 69/156] Installing zstd-0:1.5.6-1.fc4 100% | 167.5 MiB/s | 1.8 MiB | 00m00s [ 70/156] Installing util-linux-core-0: 100% | 116.3 MiB/s | 1.5 MiB | 00m00s [ 71/156] Installing tar-2:1.35-3.fc40. 100% | 167.8 MiB/s | 3.0 MiB | 00m00s [ 72/156] Installing libsemanage-0:3.7- 100% | 59.2 MiB/s | 303.1 KiB | 00m00s [ 73/156] Installing shadow-utils-2:4.1 100% | 91.6 MiB/s | 4.2 MiB | 00m00s >>> Running pre-install scriptlet: libutempter-0:1.2.1-13.fc40.s390x >>> Stop pre-install scriptlet: libutempter-0:1.2.1-13.fc40.s390x [ 74/156] Installing libutempter-0:1.2. 100% | 28.9 MiB/s | 59.3 KiB | 00m00s [ 75/156] Installing zip-0:3.0-40.fc40. 100% | 123.4 MiB/s | 758.1 KiB | 00m00s [ 76/156] Installing gdbm-1:1.23-6.fc40 100% | 95.5 MiB/s | 488.8 KiB | 00m00s [ 77/156] Installing cyrus-sasl-lib-0:2 100% | 149.6 MiB/s | 2.4 MiB | 00m00s [ 78/156] Installing libfdisk-0:2.40.2- 100% | 96.7 MiB/s | 395.9 KiB | 00m00s [ 79/156] Installing libxml2-0:2.12.8-1 100% | 144.9 MiB/s | 1.9 MiB | 00m00s [ 80/156] Installing bzip2-0:1.0.8-18.f 100% | 50.6 MiB/s | 103.7 KiB | 00m00s [ 81/156] Installing add-determinism-0: 100% | 158.7 MiB/s | 3.0 MiB | 00m00s [ 82/156] Installing build-reproducibil 100% | 1.0 MiB/s | 1.0 KiB | 00m00s [ 83/156] Installing sqlite-libs-0:3.46 100% | 132.2 MiB/s | 1.6 MiB | 00m00s [ 84/156] Installing ed-0:1.20.2-1.fc41 100% | 74.7 MiB/s | 152.9 KiB | 00m00s [ 85/156] Installing patch-0:2.7.6-24.f 100% | 97.6 MiB/s | 299.8 KiB | 00m00s [ 86/156] Installing elfutils-default-y 100% | 340.5 KiB/s | 2.0 KiB | 00m00s >>> Running post-install scriptlet: elfutils-default-yama-scope-0:0.191-7.fc41.n >>> Stop post-install scriptlet: elfutils-default-yama-scope-0:0.191-7.fc41.noar [ 87/156] Installing elfutils-libs-0:0. 100% | 104.9 MiB/s | 751.9 KiB | 00m00s [ 88/156] Installing cpio-0:2.15-1.fc40 100% | 124.3 MiB/s | 1.1 MiB | 00m00s [ 89/156] Installing diffutils-0:3.10-5 100% | 161.6 MiB/s | 1.6 MiB | 00m00s [ 90/156] Installing jansson-0:2.13.1-9 100% | 45.7 MiB/s | 93.5 KiB | 00m00s [ 91/156] Installing libgomp-0:14.1.1-7 100% | 173.4 MiB/s | 532.6 KiB | 00m00s [ 92/156] Installing libpkgconf-0:2.1.1 100% | 84.9 MiB/s | 87.0 KiB | 00m00s [ 93/156] Installing pkgconf-0:2.1.1-1. 100% | 43.5 MiB/s | 89.1 KiB | 00m00s [ 94/156] Installing pkgconf-pkg-config 100% | 1.7 MiB/s | 1.8 KiB | 00m00s [ 95/156] Installing libffi-0:3.4.6-1.f 100% | 32.9 MiB/s | 67.3 KiB | 00m00s [ 96/156] Installing p11-kit-0:0.25.5-1 100% | 156.5 MiB/s | 2.5 MiB | 00m00s [ 97/156] Installing p11-kit-trust-0:0. 100% | 46.6 MiB/s | 476.9 KiB | 00m00s >>> Running post-install scriptlet: p11-kit-trust-0:0.25.5-1.fc41.s390x >>> Stop post-install scriptlet: p11-kit-trust-0:0.25.5-1.fc41.s390x [ 98/156] Installing keyutils-libs-0:1. 100% | 27.1 MiB/s | 55.6 KiB | 00m00s [ 99/156] Installing libverto-0:0.3.2-8 100% | 30.3 MiB/s | 31.1 KiB | 00m00s [100/156] Installing xxhash-libs-0:0.8. 100% | 67.8 MiB/s | 69.4 KiB | 00m00s [101/156] Installing libbrotli-0:1.1.0- 100% | 129.4 MiB/s | 927.4 KiB | 00m00s [102/156] Installing libnghttp2-0:1.62. 100% | 87.5 MiB/s | 179.1 KiB | 00m00s [103/156] Installing libtool-ltdl-0:2.4 100% | 73.3 MiB/s | 75.1 KiB | 00m00s [104/156] Installing rust-srpm-macros-0 100% | 5.4 MiB/s | 5.6 KiB | 00m00s [105/156] Installing qt6-srpm-macros-0: 100% | 714.8 KiB/s | 732.0 B | 00m00s [106/156] Installing qt5-srpm-macros-0: 100% | 757.8 KiB/s | 776.0 B | 00m00s [107/156] Installing perl-srpm-macros-0 100% | 1.1 MiB/s | 1.1 KiB | 00m00s [108/156] Installing package-notes-srpm 100% | 2.0 MiB/s | 2.0 KiB | 00m00s [109/156] Installing openblas-srpm-macr 100% | 382.8 KiB/s | 392.0 B | 00m00s [110/156] Installing ocaml-srpm-macros- 100% | 2.1 MiB/s | 2.2 KiB | 00m00s [111/156] Installing kernel-srpm-macros 100% | 2.3 MiB/s | 2.3 KiB | 00m00s [112/156] Installing gnat-srpm-macros-0 100% | 1.2 MiB/s | 1.3 KiB | 00m00s [113/156] Installing ghc-srpm-macros-0: 100% | 1.0 MiB/s | 1.0 KiB | 00m00s [114/156] Installing fpc-srpm-macros-0: 100% | 410.2 KiB/s | 420.0 B | 00m00s [115/156] Installing ansible-srpm-macro 100% | 17.7 MiB/s | 36.2 KiB | 00m00s [116/156] Installing coreutils-common-0 100% | 186.5 MiB/s | 11.2 MiB | 00m00s [117/156] Installing openssl-libs-1:3.2 100% | 149.7 MiB/s | 6.1 MiB | 00m00s [118/156] Installing coreutils-0:9.5-3. 100% | 158.9 MiB/s | 6.0 MiB | 00m00s >>> Running pre-install scriptlet: ca-certificates-0:2024.2.68_v8.0.302-2.fc41.n >>> Stop pre-install scriptlet: ca-certificates-0:2024.2.68_v8.0.302-2.fc41.noar [119/156] Installing ca-certificates-0: 100% | 2.3 MiB/s | 2.4 MiB | 00m01s >>> Running post-install scriptlet: ca-certificates-0:2024.2.68_v8.0.302-2.fc41. >>> Stop post-install scriptlet: ca-certificates-0:2024.2.68_v8.0.302-2.fc41.noa [120/156] Installing krb5-libs-0:1.21.2 100% | 204.3 MiB/s | 2.5 MiB | 00m00s [121/156] Installing libarchive-0:3.7.4 100% | 199.3 MiB/s | 1.0 MiB | 00m00s [122/156] Installing libtirpc-0:1.3.4-1 100% | 105.6 MiB/s | 216.4 KiB | 00m00s [123/156] Installing gzip-0:1.13-1.fc40 100% | 132.3 MiB/s | 406.3 KiB | 00m00s [124/156] Installing authselect-libs-0: 100% | 135.8 MiB/s | 834.5 KiB | 00m00s [125/156] Installing cracklib-0:2.9.11- 100% | 63.8 MiB/s | 261.4 KiB | 00m00s [126/156] Installing libpwquality-0:1.4 100% | 105.7 MiB/s | 433.1 KiB | 00m00s [127/156] Installing libnsl2-0:2.0.1-1. 100% | 30.7 MiB/s | 62.8 KiB | 00m00s [128/156] Installing pam-0:1.6.1-4.fc41 100% | 138.2 MiB/s | 1.8 MiB | 00m00s [129/156] Installing libssh-0:0.10.6-6. 100% | 172.9 MiB/s | 531.2 KiB | 00m00s [130/156] Installing rpm-sequoia-0:1.6. 100% | 264.5 MiB/s | 2.9 MiB | 00m00s [131/156] Installing rpm-libs-0:4.19.92 100% | 198.0 MiB/s | 811.1 KiB | 00m00s [132/156] Installing rpm-build-libs-0:4 100% | 107.1 MiB/s | 219.3 KiB | 00m00s [133/156] Installing libevent-0:2.1.12- 100% | 230.1 MiB/s | 942.5 KiB | 00m00s [134/156] Installing openldap-0:2.6.8-3 100% | 165.9 MiB/s | 679.5 KiB | 00m00s [135/156] Installing libcurl-0:8.8.0-1. 100% | 208.6 MiB/s | 854.5 KiB | 00m00s [136/156] Installing elfutils-debuginfo 100% | 32.4 MiB/s | 66.3 KiB | 00m00s [137/156] Installing binutils-0:2.42.50 100% | 291.1 MiB/s | 26.5 MiB | 00m00s >>> Running post-install scriptlet: binutils-0:2.42.50-14.fc41.s390x >>> Stop post-install scriptlet: binutils-0:2.42.50-14.fc41.s390x [138/156] Installing elfutils-0:0.191-7 100% | 296.7 MiB/s | 3.0 MiB | 00m00s [139/156] Installing gdb-minimal-0:14.2 100% | 277.8 MiB/s | 13.1 MiB | 00m00s [140/156] Installing debugedit-0:5.0-16 100% | 200.7 MiB/s | 205.5 KiB | 00m00s [141/156] Installing curl-0:8.8.0-1.fc4 100% | 68.4 MiB/s | 770.1 KiB | 00m00s >>> Running pre-install scriptlet: rpm-0:4.19.92-2.fc41.s390x >>> Stop pre-install scriptlet: rpm-0:4.19.92-2.fc41.s390x [142/156] Installing rpm-0:4.19.92-2.fc 100% | 146.7 MiB/s | 2.5 MiB | 00m00s [143/156] Installing efi-srpm-macros-0: 100% | 40.2 MiB/s | 41.2 KiB | 00m00s [144/156] Installing lua-srpm-macros-0: 100% | 0.0 B/s | 1.9 KiB | 00m00s [145/156] Installing zig-srpm-macros-0: 100% | 0.0 B/s | 1.7 KiB | 00m00s [146/156] Installing fonts-srpm-macros- 100% | 55.7 MiB/s | 57.0 KiB | 00m00s [147/156] Installing forge-srpm-macros- 100% | 39.4 MiB/s | 40.3 KiB | 00m00s [148/156] Installing go-srpm-macros-0:3 100% | 60.5 MiB/s | 62.0 KiB | 00m00s [149/156] Installing python-srpm-macros 100% | 50.9 MiB/s | 52.2 KiB | 00m00s [150/156] Installing redhat-rpm-config- 100% | 61.9 MiB/s | 190.1 KiB | 00m00s [151/156] Installing rpm-build-0:4.19.9 100% | 100.1 MiB/s | 205.0 KiB | 00m00s [152/156] Installing pyproject-srpm-mac 100% | 1.0 MiB/s | 2.1 KiB | 00m00s [153/156] Installing util-linux-0:2.40. 100% | 139.6 MiB/s | 3.8 MiB | 00m00s >>> Running post-install scriptlet: util-linux-0:2.40.2-1.fc41.s390x >>> Stop post-install scriptlet: util-linux-0:2.40.2-1.fc41.s390x [154/156] Installing authselect-0:1.5.0 100% | 77.0 MiB/s | 157.7 KiB | 00m00s [155/156] Installing which-0:2.21-41.fc 100% | 84.1 MiB/s | 86.1 KiB | 00m00s warning: posix.fork(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead warning: posix.wait(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead warning: posix.exec(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead [156/156] Installing info-0:7.1-2.fc40. 100% | 323.9 KiB/s | 405.5 KiB | 00m01s >>> Running post-transaction scriptlet: filesystem-0:3.18-9.fc41.s390x >>> Stop post-transaction scriptlet: filesystem-0:3.18-9.fc41.s390x >>> Running post-transaction scriptlet: ca-certificates-0:2024.2.68_v8.0.302-2.f >>> Stop post-transaction scriptlet: ca-certificates-0:2024.2.68_v8.0.302-2.fc41 >>> Running post-transaction scriptlet: authselect-libs-0:1.5.0-6.fc41.s390x >>> Stop post-transaction scriptlet: authselect-libs-0:1.5.0-6.fc41.s390x >>> Running post-transaction scriptlet: rpm-0:4.19.92-2.fc41.s390x >>> Stop post-transaction scriptlet: rpm-0:4.19.92-2.fc41.s390x >>> Running trigger-install scriptlet: glibc-common-0:2.39.9000-30.fc41.s390x >>> Stop trigger-install scriptlet: glibc-common-0:2.39.9000-30.fc41.s390x >>> Running trigger-install scriptlet: info-0:7.1-2.fc40.s390x >>> Stop trigger-install scriptlet: info-0:7.1-2.fc40.s390x Complete! Finish: installing minimal buildroot with dnf5 Start: creating root cache Finish: creating root cache Finish: chroot init INFO: Installed packages: INFO: add-determinism-0.3.3-1.fc41.s390x alternatives-1.28-1.fc41.s390x ansible-srpm-macros-1-15.fc41.noarch audit-libs-4.0.1-3.fc41.s390x authselect-1.5.0-6.fc41.s390x authselect-libs-1.5.0-6.fc41.s390x basesystem-11-20.fc40.noarch bash-5.2.26-3.fc40.s390x binutils-2.42.50-14.fc41.s390x build-reproducibility-srpm-macros-0.3.3-1.fc41.noarch bzip2-1.0.8-18.fc40.s390x bzip2-libs-1.0.8-18.fc40.s390x ca-certificates-2024.2.68_v8.0.302-2.fc41.noarch coreutils-9.5-3.fc41.s390x coreutils-common-9.5-3.fc41.s390x cpio-2.15-1.fc40.s390x cracklib-2.9.11-5.fc40.s390x crypto-policies-20240628-1.gitddd11d3.fc41.noarch curl-8.8.0-1.fc41.s390x cyrus-sasl-lib-2.1.28-24.fc41.s390x debugedit-5.0-16.fc41.s390x diffutils-3.10-5.fc40.s390x dwz-0.15-6.fc40.s390x ed-1.20.2-1.fc41.s390x efi-srpm-macros-5-11.fc40.noarch elfutils-0.191-7.fc41.s390x elfutils-debuginfod-client-0.191-7.fc41.s390x elfutils-default-yama-scope-0.191-7.fc41.noarch elfutils-libelf-0.191-7.fc41.s390x elfutils-libs-0.191-7.fc41.s390x fedora-gpg-keys-41-0.2.noarch fedora-release-41-0.14.noarch fedora-release-common-41-0.14.noarch fedora-release-identity-basic-41-0.14.noarch fedora-repos-41-0.2.noarch fedora-repos-rawhide-41-0.2.noarch file-5.45-6.fc41.s390x file-libs-5.45-6.fc41.s390x filesystem-3.18-9.fc41.s390x findutils-4.10.0-3.fc41.s390x fonts-srpm-macros-2.0.5-16.fc41.noarch forge-srpm-macros-0.3.1-1.fc41.noarch fpc-srpm-macros-1.3-12.fc40.noarch gawk-5.3.0-3.fc40.s390x gdb-minimal-14.2-13.fc41.s390x gdbm-1.23-6.fc40.s390x gdbm-libs-1.23-6.fc40.s390x ghc-srpm-macros-1.9.1-1.fc41.noarch glibc-2.39.9000-30.fc41.s390x glibc-common-2.39.9000-30.fc41.s390x glibc-gconv-extra-2.39.9000-30.fc41.s390x glibc-minimal-langpack-2.39.9000-30.fc41.s390x gmp-6.3.0-1.fc41.s390x gnat-srpm-macros-6-5.fc40.noarch go-srpm-macros-3.6.0-1.fc41.noarch gpg-pubkey-a15b79cc-63d04c2c gpg-pubkey-e99d6ad1-64d2612c grep-3.11-8.fc41.s390x gzip-1.13-1.fc40.s390x info-7.1-2.fc40.s390x jansson-2.13.1-9.fc40.s390x kernel-srpm-macros-1.0-23.fc41.noarch keyutils-libs-1.6.3-3.fc40.s390x krb5-libs-1.21.2-5.fc40.s390x libacl-2.3.2-1.fc40.s390x libarchive-3.7.4-2.fc41.s390x libattr-2.5.2-3.fc40.s390x libblkid-2.40.2-1.fc41.s390x libbrotli-1.1.0-4.fc41.s390x libcap-2.70-2.fc41.s390x libcap-ng-0.8.5-2.fc41.s390x libcom_err-1.47.1-1.fc41.s390x libcurl-8.8.0-1.fc41.s390x libeconf-0.6.2-2.fc41.s390x libevent-2.1.12-13.fc41.s390x libfdisk-2.40.2-1.fc41.s390x libffi-3.4.6-1.fc41.s390x libgcc-14.1.1-7.fc41.s390x libgomp-14.1.1-7.fc41.s390x libidn2-2.3.7-1.fc40.s390x libmount-2.40.2-1.fc41.s390x libnghttp2-1.62.1-1.fc41.s390x libnsl2-2.0.1-1.fc40.s390x libpkgconf-2.1.1-1.fc41.s390x libpsl-0.21.5-3.fc40.s390x libpwquality-1.4.5-10.fc41.s390x libselinux-3.7-1.fc41.s390x libsemanage-3.7-1.fc41.s390x libsepol-3.7-1.fc41.s390x libsmartcols-2.40.2-1.fc41.s390x libssh-0.10.6-6.fc41.s390x libssh-config-0.10.6-6.fc41.noarch libstdc++-14.1.1-7.fc41.s390x libtasn1-4.19.0-6.fc40.s390x libtirpc-1.3.4-1.rc3.fc41.s390x libtool-ltdl-2.4.7-11.fc41.s390x libunistring-1.1-7.fc41.s390x libutempter-1.2.1-13.fc40.s390x libuuid-2.40.2-1.fc41.s390x libverto-0.3.2-8.fc40.s390x libxcrypt-4.4.36-5.fc40.s390x libxml2-2.12.8-1.fc41.s390x libzstd-1.5.6-1.fc41.s390x lua-libs-5.4.6-5.fc40.s390x lua-srpm-macros-1-13.fc40.noarch lz4-libs-1.9.4-6.fc40.s390x mpfr-4.2.1-4.fc41.s390x ncurses-base-6.4-12.20240127.fc40.noarch ncurses-libs-6.4-12.20240127.fc40.s390x ocaml-srpm-macros-10-2.fc41.noarch openblas-srpm-macros-2-17.fc41.noarch openldap-2.6.8-3.fc41.s390x openssl-libs-3.2.2-3.fc41.s390x p11-kit-0.25.5-1.fc41.s390x p11-kit-trust-0.25.5-1.fc41.s390x package-notes-srpm-macros-0.5-11.fc40.noarch pam-1.6.1-4.fc41.s390x pam-libs-1.6.1-4.fc41.s390x patch-2.7.6-24.fc40.s390x pcre2-10.44-1.fc41.s390x pcre2-syntax-10.44-1.fc41.noarch perl-srpm-macros-1-55.fc41.noarch pkgconf-2.1.1-1.fc41.s390x pkgconf-m4-2.1.1-1.fc41.noarch pkgconf-pkg-config-2.1.1-1.fc41.s390x popt-1.19-6.fc40.s390x publicsuffix-list-dafsa-20240107-3.fc40.noarch pyproject-srpm-macros-1.13.0-1.fc41.noarch python-srpm-macros-3.13-2.fc41.noarch qt5-srpm-macros-5.15.14-1.fc41.noarch qt6-srpm-macros-6.7.2-1.fc41.noarch readline-8.2-8.fc40.s390x redhat-rpm-config-293-1.fc41.noarch rpm-4.19.92-2.fc41.s390x rpm-build-4.19.92-2.fc41.s390x rpm-build-libs-4.19.92-2.fc41.s390x rpm-libs-4.19.92-2.fc41.s390x rpm-sequoia-1.6.0-3.fc41.s390x rust-srpm-macros-26.3-1.fc41.noarch sed-4.9-1.fc40.s390x setup-2.15.0-4.fc41.noarch shadow-utils-4.15.1-5.fc41.s390x sqlite-libs-3.46.0-2.fc41.s390x systemd-libs-256.1-8.fc41.s390x tar-1.35-3.fc40.s390x unzip-6.0-63.fc40.s390x util-linux-2.40.2-1.fc41.s390x util-linux-core-2.40.2-1.fc41.s390x which-2.21-41.fc40.s390x xxhash-libs-0.8.2-2.fc40.s390x xz-5.6.2-1.fc41.s390x xz-libs-5.6.2-1.fc41.s390x zig-srpm-macros-1-2.fc40.noarch zip-3.0-40.fc40.s390x zlib-ng-compat-2.1.7-1.fc41.s390x zstd-1.5.6-1.fc41.s390x Start: buildsrpm Start: rpmbuild -bs Building target platforms: s390x Building for target s390x setting SOURCE_DATE_EPOCH=1720310400 Wrote: /builddir/build/SRPMS/ffmulticonverter-1.8.0-27.fc41.src.rpm Finish: rpmbuild -bs cp: preserving permissions for ‘/var/lib/copr-rpmbuild/results/chroot_scan/var/lib/mock/fedora-rawhide-s390x-1720362566.222730/root/var/log’: No such file or directory INFO: chroot_scan: 1 files copied to /var/lib/copr-rpmbuild/results/chroot_scan INFO: /var/lib/mock/fedora-rawhide-s390x-1720362566.222730/root/var/log/dnf5.log Finish: buildsrpm INFO: Done(/var/lib/copr-rpmbuild/workspace/workdir-yee52_rt/ffmulticonverter/ffmulticonverter.spec) Config(child) 0 minutes 58 seconds INFO: Results and/or logs in: /var/lib/copr-rpmbuild/results INFO: Cleaning up build root ('cleanup_on_success=True') Start: clean chroot INFO: unmounting tmpfs. Finish: clean chroot INFO: Start(/var/lib/copr-rpmbuild/results/ffmulticonverter-1.8.0-27.fc41.src.rpm) Config(fedora-rawhide-s390x) Start(bootstrap): chroot init INFO: mounting tmpfs at /var/lib/mock/fedora-rawhide-s390x-bootstrap-1720362566.222730/root. INFO: reusing tmpfs at /var/lib/mock/fedora-rawhide-s390x-bootstrap-1720362566.222730/root. INFO: calling preinit hooks INFO: enabled root cache INFO: enabled package manager cache Start(bootstrap): cleaning package manager metadata Finish(bootstrap): cleaning package manager metadata Finish(bootstrap): chroot init Start: chroot init INFO: mounting tmpfs at /var/lib/mock/fedora-rawhide-s390x-1720362566.222730/root. INFO: calling preinit hooks INFO: enabled root cache Start: unpacking root cache Finish: unpacking root cache INFO: enabled package manager cache Start: cleaning package manager metadata Finish: cleaning package manager metadata INFO: enabled HW Info plugin INFO: Buildroot is handled by package management downloaded with a bootstrap image: rpm-4.19.92-2.fc41.s390x rpm-sequoia-1.6.0-3.fc41.s390x dnf5-5.2.4.0-1.fc41.s390x dnf5-plugins-5.2.4.0-1.fc41.s390x Finish: chroot init Start: build phase for ffmulticonverter-1.8.0-27.fc41.src.rpm Start: build setup for ffmulticonverter-1.8.0-27.fc41.src.rpm Building target platforms: s390x Building for target s390x setting SOURCE_DATE_EPOCH=1720310400 Wrote: /builddir/build/SRPMS/ffmulticonverter-1.8.0-27.fc41.src.rpm Updating and loading repositories: fedora 100% | 1.1 KiB/s | 5.8 KiB | 00m05s Copr repository 100% | 142.9 KiB/s | 2.1 KiB | 00m00s Repositories loaded. Package Arch Version Repository Size Installing: desktop-file-utils s390x 0.26-12.fc40 fedora 249.2 KiB python3-devel s390x 3.13.0~b3-2.fc41 fedora 1.8 MiB python3-setuptools noarch 69.2.0-6.fc41 fedora 7.3 MiB Installing dependencies: emacs-filesystem noarch 1:30.0-2.fc41 fedora 0.0 B expat s390x 2.6.2-1.fc41 fedora 316.4 KiB glib2 s390x 2.80.3-1.fc41 fedora 14.9 MiB gnutls s390x 3.8.6-1.fc41 fedora 3.1 MiB libb2 s390x 0.98.1-11.fc40 fedora 42.0 KiB mpdecimal s390x 2.5.1-15.fc41 fedora 224.7 KiB nettle s390x 3.10-2.fc41 fedora 849.1 KiB pyproject-rpm-macros noarch 1.13.0-1.fc41 fedora 103.0 KiB python-pip-wheel noarch 24.1.1-1.fc41 fedora 1.2 MiB python-rpm-macros noarch 3.13-2.fc41 fedora 22.1 KiB python3 s390x 3.13.0~b3-2.fc41 fedora 31.6 KiB python3-libs s390x 3.13.0~b3-2.fc41 fedora 41.0 MiB python3-packaging noarch 24.1-1.fc41 fedora 422.7 KiB python3-rpm-generators noarch 14-10.fc40 fedora 81.7 KiB python3-rpm-macros noarch 3.13-2.fc41 fedora 6.4 KiB tzdata noarch 2024a-8.fc41 fedora 1.7 MiB Transaction Summary: Installing: 19 packages Total size of inbound packages is 18 MiB. Need to download 18 MiB. After this operation 73 MiB will be used (install 73 MiB, remove 0 B). [ 1/19] desktop-file-utils-0:0.26-12.fc 100% | 655.3 KiB/s | 72.1 KiB | 00m00s [ 2/19] emacs-filesystem-1:30.0-2.fc41. 100% | 150.9 KiB/s | 7.1 KiB | 00m00s [ 3/19] python3-setuptools-0:69.2.0-6.f 100% | 9.7 MiB/s | 1.6 MiB | 00m00s [ 4/19] python3-devel-0:3.13.0~b3-2.fc4 100% | 79.9 KiB/s | 399.9 KiB | 00m05s [ 5/19] python3-0:3.13.0~b3-2.fc41.s390 100% | 5.4 KiB/s | 26.2 KiB | 00m05s [ 6/19] gnutls-0:3.8.6-1.fc41.s390x 100% | 21.3 MiB/s | 1.1 MiB | 00m00s [ 7/19] expat-0:2.6.2-1.fc41.s390x 100% | 2.9 MiB/s | 117.1 KiB | 00m00s [ 8/19] libb2-0:0.98.1-11.fc40.s390x 100% | 1.0 MiB/s | 26.8 KiB | 00m00s [ 9/19] mpdecimal-0:2.5.1-15.fc41.s390x 100% | 1.8 MiB/s | 99.3 KiB | 00m00s [10/19] python3-libs-0:3.13.0~b3-2.fc41 100% | 49.5 MiB/s | 9.1 MiB | 00m00s [11/19] python-pip-wheel-0:24.1.1-1.fc4 100% | 21.2 MiB/s | 1.2 MiB | 00m00s [12/19] glib2-0:2.80.3-1.fc41.s390x 100% | 612.8 KiB/s | 3.0 MiB | 00m05s [13/19] nettle-0:3.10-2.fc41.s390x 100% | 16.6 MiB/s | 458.2 KiB | 00m00s [14/19] tzdata-0:2024a-8.fc41.noarch 100% | 7.0 MiB/s | 714.9 KiB | 00m00s [15/19] pyproject-rpm-macros-0:1.13.0-1 100% | 1.0 MiB/s | 41.6 KiB | 00m00s [16/19] python3-rpm-generators-0:14-10. 100% | 1.1 MiB/s | 29.6 KiB | 00m00s [17/19] python-rpm-macros-0:3.13-2.fc41 100% | 329.1 KiB/s | 17.8 KiB | 00m00s [18/19] python3-rpm-macros-0:3.13-2.fc4 100% | 305.9 KiB/s | 12.5 KiB | 00m00s [19/19] python3-packaging-0:24.1-1.fc41 100% | 3.1 MiB/s | 125.7 KiB | 00m00s -------------------------------------------------------------------------------- [19/19] Total 100% | 1.7 MiB/s | 18.1 MiB | 00m10s Running transaction [ 1/21] Verify package files 100% | 306.0 B/s | 19.0 B | 00m00s [ 2/21] Prepare transaction 100% | 441.0 B/s | 19.0 B | 00m00s [ 3/21] Installing python-rpm-macros-0: 100% | 22.3 MiB/s | 22.8 KiB | 00m00s [ 4/21] Installing python3-rpm-macros-0 100% | 0.0 B/s | 6.7 KiB | 00m00s [ 5/21] Installing pyproject-rpm-macros 100% | 102.5 MiB/s | 105.0 KiB | 00m00s [ 6/21] Installing nettle-0:3.10-2.fc41 100% | 208.1 MiB/s | 852.2 KiB | 00m00s [ 7/21] Installing gnutls-0:3.8.6-1.fc4 100% | 261.9 MiB/s | 3.1 MiB | 00m00s [ 8/21] Installing glib2-0:2.80.3-1.fc4 100% | 293.2 MiB/s | 15.0 MiB | 00m00s [ 9/21] Installing tzdata-0:2024a-8.fc4 100% | 62.6 MiB/s | 1.9 MiB | 00m00s [10/21] Installing python-pip-wheel-0:2 100% | 624.8 MiB/s | 1.2 MiB | 00m00s [11/21] Installing mpdecimal-0:2.5.1-15 100% | 220.5 MiB/s | 225.8 KiB | 00m00s [12/21] Installing libb2-0:0.98.1-11.fc 100% | 42.1 MiB/s | 43.1 KiB | 00m00s [13/21] Installing expat-0:2.6.2-1.fc41 100% | 44.4 MiB/s | 318.5 KiB | 00m00s [14/21] Installing python3-libs-0:3.13. 100% | 277.5 MiB/s | 41.3 MiB | 00m00s [15/21] Installing python3-0:3.13.0~b3- 100% | 32.6 MiB/s | 33.4 KiB | 00m00s [16/21] Installing python3-packaging-0: 100% | 141.1 MiB/s | 433.5 KiB | 00m00s [17/21] Installing python3-rpm-generato 100% | 81.0 MiB/s | 82.9 KiB | 00m00s [18/21] Installing emacs-filesystem-1:3 100% | 0.0 B/s | 544.0 B | 00m00s [19/21] Installing desktop-file-utils-0 100% | 82.4 MiB/s | 253.0 KiB | 00m00s [20/21] Installing python3-devel-0:3.13 100% | 139.0 MiB/s | 1.8 MiB | 00m00s warning: posix.fork(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead warning: posix.wait(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead warning: posix.exec(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead [21/21] Installing python3-setuptools-0 100% | 81.9 MiB/s | 7.4 MiB | 00m00s >>> Running trigger-install scriptlet: glibc-common-0:2.39.9000-30.fc41.s390x >>> Stop trigger-install scriptlet: glibc-common-0:2.39.9000-30.fc41.s390x >>> Running trigger-install scriptlet: info-0:7.1-2.fc40.s390x >>> Stop trigger-install scriptlet: info-0:7.1-2.fc40.s390x >>> Running trigger-install scriptlet: glib2-0:2.80.3-1.fc41.s390x >>> Stop trigger-install scriptlet: glib2-0:2.80.3-1.fc41.s390x Complete! Finish: build setup for ffmulticonverter-1.8.0-27.fc41.src.rpm Start: rpmbuild ffmulticonverter-1.8.0-27.fc41.src.rpm Building target platforms: s390x Building for target s390x setting SOURCE_DATE_EPOCH=1720310400 Executing(%mkbuilddir): /bin/sh -e /var/tmp/rpm-tmp.H5WPpr + umask 022 + cd /builddir/build/BUILD/ffmulticonverter-1.8.0-build + test -d /builddir/build/BUILD/ffmulticonverter-1.8.0-build + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /builddir/build/BUILD/ffmulticonverter-1.8.0-build + /usr/bin/rm -rf /builddir/build/BUILD/ffmulticonverter-1.8.0-build + /usr/bin/mkdir -p /builddir/build/BUILD/ffmulticonverter-1.8.0-build + /usr/bin/mkdir -p /builddir/build/BUILD/ffmulticonverter-1.8.0-build/SPECPARTS + RPM_EC=0 ++ jobs -p + exit 0 Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.jCXYQ5 + umask 022 + cd /builddir/build/BUILD/ffmulticonverter-1.8.0-build + cd /builddir/build/BUILD/ffmulticonverter-1.8.0-build + rm -rf ffmulticonverter-1.8.0 + /usr/lib/rpm/rpmuncompress -x /builddir/build/SOURCES/ffmulticonverter-1.8.0.tar.gz + STATUS=0 + '[' 0 -ne 0 ']' + cd ffmulticonverter-1.8.0 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + RPM_EC=0 ++ jobs -p + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.KQYy6E + umask 022 + cd /builddir/build/BUILD/ffmulticonverter-1.8.0-build + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection ' + export CFLAGS + CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection ' + export CXXFLAGS + FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection -I/usr/lib64/gfortran/modules ' + export FFLAGS + FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection -I/usr/lib64/gfortran/modules ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Clink-arg=-specs=/usr/lib/rpm/redhat/redhat-package-notes --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes ' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib64: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd ffmulticonverter-1.8.0 + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection ' + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes ' + /usr/bin/python3 setup.py build '--executable=/usr/bin/python3 -sP' + RPM_EC=0 ++ jobs -p + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.xu7gjj + umask 022 + cd /builddir/build/BUILD/ffmulticonverter-1.8.0-build + '[' /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT '!=' / ']' + rm -rf /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT ++ dirname /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT + mkdir -p /builddir/build/BUILD/ffmulticonverter-1.8.0-build + mkdir /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection ' + export CFLAGS + CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection ' + export CXXFLAGS + FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection -I/usr/lib64/gfortran/modules ' + export FFLAGS + FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection -I/usr/lib64/gfortran/modules ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Clink-arg=-specs=/usr/lib/rpm/redhat/redhat-package-notes --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes ' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib64: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd ffmulticonverter-1.8.0 + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection ' + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes ' + /usr/bin/python3 setup.py install -O1 --skip-build --root /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT --prefix /usr /usr/lib/python3.13/site-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. !! ******************************************************************************** Please avoid running ``setup.py`` directly. Instead, use pypa/build, pypa/installer or other standards-based tools. Follow the current Python packaging guidelines when building Python RPM packages. See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html and https://docs.fedoraproject.org/en-US/packaging-guidelines/Python/ for details. ******************************************************************************** !! self.initialize_options() /usr/lib/python3.13/site-packages/ffmulticonverter/progress.py:341: SyntaxWarning: invalid escape sequence '\!' /usr/lib/python3.13/site-packages/ffmulticonverter/progress.py:341: SyntaxWarning: invalid escape sequence '\!' /usr/lib/python3.13/site-packages/setuptools/_core_metadata.py:158: SetuptoolsDeprecationWarning: Invalid config. !! ******************************************************************************** newlines are not allowed in `summary` and will break in the future ******************************************************************************** !! write_field('Summary', single_line(summary)) + rm -rfv /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT/usr/bin/__pycache__ + /usr/lib/rpm/check-buildroot + /usr/lib/rpm/redhat/brp-ldconfig + /usr/lib/rpm/brp-compress + /usr/lib/rpm/brp-strip /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/redhat/brp-strip-lto /usr/bin/strip + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/check-rpaths + /usr/lib/rpm/redhat/brp-mangle-shebangs + /usr/lib/rpm/brp-remove-la-files + env /usr/lib/rpm/redhat/brp-python-bytecompile '' 1 0 -j2 Bytecompiling .py files below /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT/usr/lib/python3.13 using python3.13 /usr/lib/python3.13/site-packages/ffmulticonverter/progress.py:341: SyntaxWarning: invalid escape sequence '\!' /usr/lib/python3.13/site-packages/ffmulticonverter/progress.py:341: SyntaxWarning: invalid escape sequence '\!' + /usr/lib/rpm/redhat/brp-python-hardlink + /usr/bin/add-determinism --brp -j2 /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT/usr/lib/python3.13/site-packages/ffmulticonverter/__pycache__/__init__.cpython-313.pyc: rewriting with normalized contents /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT/usr/lib/python3.13/site-packages/ffmulticonverter/__pycache__/about_dlg.cpython-313.pyc: rewriting with normalized contents /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT/usr/lib/python3.13/site-packages/ffmulticonverter/__pycache__/documenttab.cpython-313.pyc: rewriting with normalized contents /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT/usr/lib/python3.13/site-packages/ffmulticonverter/__pycache__/config.cpython-313.pyc: rewriting with normalized contents /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT/usr/lib/python3.13/site-packages/ffmulticonverter/__pycache__/audiovideotab.cpython-313.pyc: rewriting with normalized contents /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT/usr/lib/python3.13/site-packages/ffmulticonverter/__pycache__/ffmulticonverter.cpython-313.pyc: rewriting with normalized contents /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT/usr/lib/python3.13/site-packages/ffmulticonverter/__pycache__/imagetab.cpython-313.pyc: rewriting with normalized contents /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT/usr/lib/python3.13/site-packages/ffmulticonverter/__pycache__/presets_dlgs.cpython-313.pyc: rewriting with normalized contents /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT/usr/lib/python3.13/site-packages/ffmulticonverter/__pycache__/progress.cpython-313.pyc: rewriting with normalized contents /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT/usr/lib/python3.13/site-packages/ffmulticonverter/__pycache__/preferences_dlg.cpython-313.pyc: rewriting with normalized contents /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT/usr/lib/python3.13/site-packages/ffmulticonverter/__pycache__/utils.cpython-313.pyc: replacing with normalized version /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT/usr/lib/python3.13/site-packages/ffmulticonverter/__pycache__/utils.cpython-313.opt-1.pyc: replacing with normalized version /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT/usr/lib/python3.13/site-packages/ffmulticonverter/__pycache__/qrc_resources.cpython-313.pyc: rewriting with normalized contents Scanned 15 directories and 45 files, processed 13 inodes, 13 modified (2 replaced + 11 rewritten), 0 unsupported format, 0 errors Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.R644lm + umask 022 + cd /builddir/build/BUILD/ffmulticonverter-1.8.0-build + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection ' + export CFLAGS + CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection ' + export CXXFLAGS + FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection -I/usr/lib64/gfortran/modules ' + export FFLAGS + FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection -I/usr/lib64/gfortran/modules ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Clink-arg=-specs=/usr/lib/rpm/redhat/redhat-package-notes --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes ' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib64: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd ffmulticonverter-1.8.0 + desktop-file-validate /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT/usr/share/applications/ffmulticonverter.desktop /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT/usr/share/applications/ffmulticonverter.desktop: warning: key "Encoding" in group "Desktop Entry" is deprecated /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT/usr/share/applications/ffmulticonverter.desktop: warning: value "Application;AudioVideo;AudioVideoEditing;Office;" for key "Categories" in group "Desktop Entry" contains a deprecated value "Application" /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT/usr/share/applications/ffmulticonverter.desktop: hint: value "Application;AudioVideo;AudioVideoEditing;Office;" for key "Categories" in group "Desktop Entry" contains more than one main category; application might appear more than once in the application menu + RPM_EC=0 ++ jobs -p + exit 0 Processing files: ffmulticonverter-1.8.0-27.fc41.noarch Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.ucjkKO + umask 022 + cd /builddir/build/BUILD/ffmulticonverter-1.8.0-build + cd ffmulticonverter-1.8.0 + DOCDIR=/builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT/usr/share/doc/ffmulticonverter + export LC_ALL=C.UTF-8 + LC_ALL=C.UTF-8 + export DOCDIR + /usr/bin/mkdir -p /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT/usr/share/doc/ffmulticonverter + cp -pr /builddir/build/BUILD/ffmulticonverter-1.8.0-build/ffmulticonverter-1.8.0/ChangeLog /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT/usr/share/doc/ffmulticonverter + cp -pr /builddir/build/BUILD/ffmulticonverter-1.8.0-build/ffmulticonverter-1.8.0/README.txt /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT/usr/share/doc/ffmulticonverter + cp -pr /builddir/build/BUILD/ffmulticonverter-1.8.0-build/ffmulticonverter-1.8.0/AUTHORS /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT/usr/share/doc/ffmulticonverter + cp -pr /builddir/build/BUILD/ffmulticonverter-1.8.0-build/ffmulticonverter-1.8.0/TRANSLATORS /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT/usr/share/doc/ffmulticonverter + RPM_EC=0 ++ jobs -p + exit 0 Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.5BncZS + umask 022 + cd /builddir/build/BUILD/ffmulticonverter-1.8.0-build + cd ffmulticonverter-1.8.0 + LICENSEDIR=/builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT/usr/share/licenses/ffmulticonverter + export LC_ALL=C.UTF-8 + LC_ALL=C.UTF-8 + export LICENSEDIR + /usr/bin/mkdir -p /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT/usr/share/licenses/ffmulticonverter + cp -pr /builddir/build/BUILD/ffmulticonverter-1.8.0-build/ffmulticonverter-1.8.0/COPYING /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT/usr/share/licenses/ffmulticonverter + RPM_EC=0 ++ jobs -p + exit 0 Provides: application() application(ffmulticonverter.desktop) ffmulticonverter = 1.8.0-27.fc41 python3.13dist(ffmulticonverter) = 1.8 python3dist(ffmulticonverter) = 1.8 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /usr/bin/python3 python(abi) = 3.13 Checking for unpackaged file(s): /usr/lib/rpm/check-files /builddir/build/BUILD/ffmulticonverter-1.8.0-build/BUILDROOT Wrote: /builddir/build/RPMS/ffmulticonverter-1.8.0-27.fc41.noarch.rpm Executing(rmbuild): /bin/sh -e /var/tmp/rpm-tmp.b9IHBM + umask 022 + cd /builddir/build/BUILD/ffmulticonverter-1.8.0-build + test -d /builddir/build/BUILD/ffmulticonverter-1.8.0-build + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /builddir/build/BUILD/ffmulticonverter-1.8.0-build + rm -rf /builddir/build/BUILD/ffmulticonverter-1.8.0-build + RPM_EC=0 ++ jobs -p + exit 0 Finish: rpmbuild ffmulticonverter-1.8.0-27.fc41.src.rpm Finish: build phase for ffmulticonverter-1.8.0-27.fc41.src.rpm INFO: chroot_scan: 1 files copied to /var/lib/copr-rpmbuild/results/chroot_scan INFO: /var/lib/mock/fedora-rawhide-s390x-1720362566.222730/root/var/log/dnf5.log INFO: Done(/var/lib/copr-rpmbuild/results/ffmulticonverter-1.8.0-27.fc41.src.rpm) Config(child) 0 minutes 23 seconds INFO: Results and/or logs in: /var/lib/copr-rpmbuild/results INFO: Cleaning up build root ('cleanup_on_success=True') Start: clean chroot INFO: unmounting tmpfs. Finish: clean chroot Finish: run Running RPMResults tool Package info: { "packages": [ { "name": "ffmulticonverter", "epoch": null, "version": "1.8.0", "release": "27.fc41", "arch": "noarch" }, { "name": "ffmulticonverter", "epoch": null, "version": "1.8.0", "release": "27.fc41", "arch": "src" } ] } RPMResults finished